path: root/tools/test/h5format_convert/testh5fc.sh.in

#! /bin/sh
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5.  The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the COPYING file, which can be found at the root of the source code
# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
# If you do not have access to either file, you may request a copy from
# help@hdfgroup.org.
#
# Tests for the h5format_convert tool
#
#

srcdir=@srcdir@

# Determine which filters are available
USE_FILTER_SZIP="@USE_FILTER_SZIP@"
USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
USE_FILTER_SHUFFLE="@USE_FILTER_SHUFFLE@"
USE_FILTER_FLETCHER32="@USE_FILTER_FLETCHER32@"
USE_FILTER_NBIT="@USE_FILTER_NBIT@"
USE_FILTER_SCALEOFFSET="@USE_FILTER_SCALEOFFSET@"

TESTNAME=h5format_convert
EXIT_SUCCESS=0
EXIT_FAILURE=1

FORMCONV=../../src/h5format_convert/h5format_convert       # The tool name
FORMCONV_BIN=`pwd`/$FORMCONV    # The path of the tool binary

CHK_IDX=h5fc_chk_idx        # The program name
CHK_IDX_BIN=`pwd`/$CHK_IDX        # The program to verify the chunk indexing type is v1 B-tree

RM='rm -rf'
CMP='cmp -s'
DIFF='diff -c'
CP='cp'
H5DUMP=../../src/h5dump/h5dump         # The h5dump tool name
H5DUMP_BIN=`pwd`/$H5DUMP        # The path of the h5dump tool binary
DIRNAME='dirname'
LS='ls'
AWK='awk'

nerrors=0
verbose=yes

# source dirs
SRC_TOOLS="$srcdir/../.."
SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"

# testfiles source dirs for tools
SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
SRC_H5DIFF_TESTFILES="$SRC_TOOLS/test/h5diff/testfiles"
SRC_H5COPY_TESTFILES="$SRC_TOOLS/test/h5copy/testfiles"
SRC_H5REPACK_TESTFILES="$SRC_TOOLS/test/h5repack/testfiles"
SRC_H5JAM_TESTFILES="$SRC_TOOLS/test/h5jam/testfiles"
SRC_H5STAT_TESTFILES="$SRC_TOOLS/test/h5stat/testfiles"
SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/test/h5import/testfiles"
SRC_H5FORMCONV_TESTFILES="$SRC_TOOLS/test/h5format_convert/testfiles"

TESTDIR=./testfiles
test -d $TESTDIR || mkdir $TESTDIR

# Copy the testfile to a temporary file for testing as h5format_convert is changing the file in place
TMPOUTFILE=outtmp.h5
TMPFILE=tmp.h5
TMPCHKFILE=chktmp.h5
TMPDMPFILE=dmptmp.h5

######################################################################
# test files
# --------------------------------------------------------------------
# All the test files copy from source directory to test directory
# NOTE: Keep this framework to add/remove test files.
#       Any test files from other tools can be used in this framework.
#       This list are also used for checking exist.
#       Comment '#' without space can be used.
# --------------------------------------------------------------------
LIST_HDF5_TEST_FILES="
$SRC_H5FORMCONV_TESTFILES/h5fc_non_v3.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_edge_v3.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_ext_none.h5
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext_none.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_i.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_s.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_f.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_if.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_is.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_sf.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_ext3_isf.h5
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_i.h5
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_s.h5
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_f.h5
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_if.h5
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_is.h5
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_sf.h5
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext3_isf.h5
$SRC_H5FORMCONV_TESTFILES/h5fc_err_level.h5
"

LIST_ERR_TEST_FILES="
$SRC_H5FORMCONV_TESTFILES/h5fc_d_file.ddl.err
$SRC_H5FORMCONV_TESTFILES/h5fc_dname.err
$SRC_H5FORMCONV_TESTFILES/h5fc_nonexistfile.ddl.err
$SRC_H5FORMCONV_TESTFILES/h5fc_nonexistdset_file.ddl.err
"

LIST_OTHER_TEST_FILES="
$SRC_H5FORMCONV_TESTFILES/h5fc_help.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_nooption.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_d_file.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_dname.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_v_non_chunked.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_v_bt1.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_v_ndata_bt1.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_v_all.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_v_n_1d.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_v_n_all.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_i.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_s.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_f.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_if.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_is.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_sf.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_ext3_isf.ddl
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_i.ddl
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_s.ddl
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_f.ddl
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_if.ddl
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_is.ddl
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_sf.ddl
$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext3_isf.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_v_err.ddl
$SRC_H5FORMCONV_TESTFILES/h5fc_v_err.ddl.err
"

#
# copy test files and expected output files from source dirs to test dir
#
COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_ERR_TEST_FILES $LIST_OTHER_TEST_FILES"

COPY_TESTFILES_TO_TESTDIR()
{
    # copy test files. Used -f to make sure get a new copy
    for tstfile in $COPY_TESTFILES
    do
        # ignore '#' comment
        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
        RET=$?
        if [ $RET -eq 1 ]; then
            # skip cp if srcdir is same as destdir
            # this occurs when build/test performed in source dir and
            # make cp fail
            SDIR=`$DIRNAME $tstfile`
            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
                $CP -f $tstfile $TESTDIR
                if [ $? -ne 0 ]; then
                    echo "Error: FAILED to copy $tstfile ."

                    # Comment out this to CREATE expected file
                    exit $EXIT_FAILURE
                fi
            fi
        fi
    done
}

CLEAN_TESTFILES_AND_TESTDIR()
{
    # skip rm if srcdir is same as destdir
    # this occurs when build/test performed in source dir and
    # make cp fail
    SDIR=$SRC_H5FORMCONV_TESTFILES
    INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
    INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
    if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
        $RM $TESTDIR
    else
    $RM $TESTDIR/$TMPFILE
        $RM $TESTDIR/$TMPOUTFILE
        $RM $TESTDIR/$TMPCHKFILE
        $RM $TESTDIR/$TMPDMPFILE
    fi
}

# Print a line-line message left justified in a field of 80 characters
# beginning with the word "Testing".
#
TESTING() {
   SPACES="                                                               "
   echo "Testing $* $SPACES" | cut -c1-80 | tr -d '\012'
}

# Source in the output filter function definitions.
. $srcdir/../../../bin/output_filter.sh

# Run a test and print PASS or *FAIL*.  If a test fails then increment
# the `nerrors' global variable and (if $verbose is set) display the
# difference between the actual output and the expected output. The
# expected output is given as the first argument to this function and
# the actual output file is calculated by replacing the `.ddl' with
# `.out'.  The actual output is not removed if $HDF5_NOCLEANUP has a
# non-zero value.
#
# $1: expected output
# $2: the test file name
#    --fname might be empty or fname does not exist
#    --fname is copied to a temporary file for testing
# $3 to at most $6--options to the tool such as:
#     -d dname or --dname=dname
#     -v or --verbose
#     -n or --noop
TOOLTEST_OUT() {
    # Prepare expected and actual output
    expect="$TESTDIR/$1"
    expect_err="$TESTDIR/`basename $1 .ddl`.err"
    actual="$TESTDIR/`basename $1 .ddl`.out"
    actual_err="$TESTDIR/`basename $1 .ddl`.out.err"
    actual_sav=${actual}-sav
    actual_err_sav=${actual_err}-sav

    # Prepare the test file
    $RM $TESTDIR/$TMPOUTFILE
    TFILE=$2
    if [ ! -z "$2" ] && [ -e $TESTDIR/$2 ] ; then
    $CP $TESTDIR/$2 $TESTDIR/$TMPOUTFILE
    TFILE=$TMPOUTFILE
    fi

    # Run test.
    TESTING $FORMCONV $3 $4 $5 $6 $2
    (
    cd $TESTDIR
    $RUNSERIAL $FORMCONV_BIN $3 $4 $5 $6 $TFILE
    ) >$actual 2>$actual_err
    cp $actual $actual_sav
    cp $actual_err $actual_err_sav

    # Compare output
    COMPARE_OUT $expect $actual

    # Clean up output file
    if test -z "$HDF5_NOCLEANUP"; then
    $RM $actual $actual_err
    $RM $actual $actual_err $actual_sav $actual_err_sav
    fi
}
# Same as TOOLTEST_OUT  but filters error stack output and compares to an error file
TOOLTEST_MASK_OUT() {
    # Prepare expected and actual output
    expect="$TESTDIR/$1"
    expect_err="$TESTDIR/$1.err"
    actual_ext="$TESTDIR/$1.ext"
    actual="$TESTDIR/`basename $1 .ddl`.out"
    actual_err="$TESTDIR/`basename $1 .ddl`.out.err"
    actual_sav=${actual}-sav
    actual_err_sav=${actual_err}-sav

    # Prepare the test file
    $RM $TESTDIR/$TMPOUTFILE
    TFILE=$2
    if [ ! -z "$2" ] && [ -e $TESTDIR/$2 ] ; then
    $CP $TESTDIR/$2 $TESTDIR/$TMPOUTFILE
    TFILE=$TMPOUTFILE
    fi

    # Run test.
    TESTING $FORMCONV $3 $4 $5 $6 $2
    (
    cd $TESTDIR
    $RUNSERIAL $FORMCONV_BIN $3 $4 $5 $6 $TFILE
    ) >$actual 2>$actual_err
    cp $actual $actual_sav
    cp $actual_err $actual_err_sav
    STDERR_FILTER $actual_err

    # Extract file name, line number, version and thread IDs because they may be different
    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
        -e 's/line [0-9]*/line (number)/' \
        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
     $actual_err > $actual_ext

    # Compare output
    if $CMP $expect $actual; then
      if $CMP $expect_err $actual_ext; then
        echo " PASSED"
      else
        echo "*FAILED*"
        echo "    Expected result (*.err) differs from actual result (*.oerr)"
        nerrors="`expr $nerrors + 1`"
        test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/    /'
      fi
    else
        echo "*FAILED*"
        echo "    Expected result (*.ddl) differs from actual result (*.out)"
        nerrors="`expr $nerrors + 1`"
        test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
    fi

    # Clean up output file
    if test -z "$HDF5_NOCLEANUP"; then
    $RM $actual $actual_err
    $RM $actual $actual_err $actual_sav $actual_err_sav
    fi
}
# Same as TOOLTEST_OUT except only compares error outout
TOOLTEST_ERR() {
    # Prepare expected and actual output
    expect="$TESTDIR/$1"
    expect_err="$TESTDIR/$1.err"
    actual="$TESTDIR/`basename $1 .ddl`.out"
    actual_err="$TESTDIR/`basename $1 .ddl`.out.err"
    actual_sav=${actual}-sav
    actual_err_sav=${actual_err}-sav

    # Prepare the test file
    $RM $TESTDIR/$TMPOUTFILE
    TFILE=$2
    if [ ! -z "$2" ] && [ -e $TESTDIR/$2 ] ; then
    $CP $TESTDIR/$2 $TESTDIR/$TMPOUTFILE
    TFILE=$TMPOUTFILE
    fi

    # Run test.
    TESTING $FORMCONV $3 $4 $5 $6 $2
    (
    cd $TESTDIR
    $RUNSERIAL $FORMCONV_BIN $3 $4 $5 $6 $TFILE
    ) >$actual 2>$actual_err
    cp $actual $actual_sav
    cp $actual_err $actual_err_sav

    # Compare output
    COMPARE_OUT $expect_err $actual_err

    # Clean up output file
    if test -z "$HDF5_NOCLEANUP"; then
    $RM $actual $actual_err
    $RM $actual $actual_err $actual_sav $actual_err_sav
    fi
}

# To check that the tool exits success, no output
# Assume all short options
# $1 is the test file name
#    --fname exists
#    --fname is copied to a temporary file for testing
# $2 is the temporary file name
# $3 to at most $5--options to the tool such as:
#     -d dname
#     -n
TOOLTEST() {
    TESTING $FORMCONV $3 $4 $5 $1
    $RM $TESTDIR/$2
    $CP $TESTDIR/$1 $TESTDIR/$2
    $RUNSERIAL $FORMCONV_BIN $3 $4 $5 $TESTDIR/$2
    exitcode=$?
    if [ $exitcode -ne 0 ]; then
    echo "*FAILED*"
    echo "    The tool exits failure"
    nerrors="`expr $nerrors + 1`"
    else
    echo " PASSED"
    fi
}

CHECKING() {
   SPACES="                                                               "
   echo "Verifying $* $SPACES" | cut -c1-80 | tr -d '\012'
}

# Assume $TESTDIR/$TMPFILE is the converted test file
# $1 dataset name
IDX_CHECK() {
    CHECKING $1
    $RUNSERIAL $CHK_IDX_BIN $TESTDIR/$TMPCHKFILE $1
    ret=$?
    if [ $ret -eq 0 ]; then
    echo " PASSED"
    else
    echo "*FAILED*"
    echo "    The chunk indexing type is not correct"
    nerrors="`expr $nerrors + 1`"
    fi
}

# $1 is the expected output
# $2 is the output from testing
COMPARE_OUT() {
    if $CMP $1 $2; then
        echo " PASSED"
    else
        echo "*FAILED*"
        echo "    Expected result (*.ddl) differs from actual result (*.out)"
        nerrors="`expr $nerrors + 1`"
        test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
    fi
}

# Assume $TESTDIR/$TMPFILE is the converted test file
# $1 is the test file for verifying h5dump output
# $2 is the expected output from h5dump
H5DUMP_CHECK() {
    CHECKING h5dump output for $1
    expect="$TESTDIR/$2"
    actual="$TESTDIR/`basename $2 .ddl`.out"
    actual_err="$TESTDIR/`basename $2 .ddl`.err"
    $RUNSERIAL $H5DUMP_BIN -BH $TESTDIR/$TMPDMPFILE > $actual 2>$actual_err
    cat $actual_err >> $actual

    # Compare output
    COMPARE_OUT $expect $actual

    # Clean up output file
    if test -z "$HDF5_NOCLEANUP"; then
    $RM $actual $actual_err
    fi
}

# Print a "SKIP" message
SKIP() {
    TESTING $STAT $@
    echo  " -SKIP-"
}



##############################################################################
##############################################################################
###              T H E   T E S T S                                ###
##############################################################################
##############################################################################
# prepare for test
COPY_TESTFILES_TO_TESTDIR
#
#
#
# h5format_convert --help
# h5format_convert (no options)
# h5format_convert nonexist.h5  (no options, file does not exist)
TOOLTEST_OUT h5fc_help.ddl '' --help
TOOLTEST_OUT h5fc_nooption.ddl ''
TOOLTEST_ERR h5fc_nonexistfile.ddl nonexist.h5
#
#
# h5format_convert -d old_h5fc_ext_none.h5 (just -d option, file exists)
# h5format_convert --dname old_h5fc_ext_none.h5 (just --dname option, file exists)
# h5format_convert --dname (just --dname option)
# h5format_convert --dname=nonexist old_h5fc_ext_none.h5 (dataset does not exist, file exists)
TOOLTEST_OUT h5fc_d_file.ddl old_h5fc_ext_none.h5 -d
TOOLTEST_OUT h5fc_d_file.ddl old_h5fc_ext_none.h5 --dname
TOOLTEST_OUT h5fc_dname.ddl '' --dname
TOOLTEST_ERR h5fc_nonexistdset_file.ddl old_h5fc_ext_none.h5 --dname=nonexist
#
#
#
# h5format_convert -d /DSET_CONTIGUOUS -v old_h5fc_ext_none.h5 (verbose, contiguous dataset)
# h5format_convert -d /GROUP/DSET_BT2 --verbose old_h5fc_ext_none.h5 (verbose, bt1 dataset)
# h5format_convert -d /DSET_NDATA_BT2 -v -n old_h5fc_ext_none.h5 (verbose, noop, bt1+nodata dataset)
# h5format_convert -v old_h5fc_ext_none.h5 (verbose, all datasets)
TOOLTEST_OUT h5fc_v_non_chunked.ddl old_h5fc_ext_none.h5 -d /DSET_CONTIGUOUS -v
TOOLTEST_OUT h5fc_v_bt1.ddl old_h5fc_ext_none.h5 -d /GROUP/DSET_BT2 --verbose
TOOLTEST_OUT h5fc_v_ndata_bt1.ddl old_h5fc_ext_none.h5 -d /DSET_NDATA_BT2 -v -n
TOOLTEST_OUT h5fc_v_all.ddl old_h5fc_ext_none.h5 -v
#
#
#
# h5format_convert -d /DSET_EA -v -n h5fc_ext_none.h5 (verbose, noop, one ea dataset)
# h5format_convert -v -n h5fc_non_v3.h5 (verbose, noop, all datasets)
TOOLTEST_OUT h5fc_v_n_1d.ddl h5fc_ext_none.h5 -d /DSET_EA -v -n
TOOLTEST_OUT h5fc_v_n_all.ddl h5fc_non_v3.h5 -v -n
#
#
#
# h5format_convert -v h5fc_err_level.h5 (error encountered in converting the dataset)
TOOLTEST_MASK_OUT h5fc_v_err.ddl h5fc_err_level.h5 -v
#
#
#
# No output from tests
# 1) Use the tool to convert the dataset
# 2) Verify the chunk indexing type is correct
# h5format_convert -d /DSET_EA h5fc_ext_none.h5
# h5format_convert -d /GROUP/DSET_NDATA_EA h5fc_ext_none.h5
# h5format_convert -d /GROUP/DSET_BT2 h5fc_ext_none.h5
# h5format_convert -d /DSET_NDATA_BT2 h5fc_ext_none.h5
# h5format_convert -d /DSET_FA h5fc_ext_none.h5
# h5format_convert -d /GROUP/DSET_FA h5fc_ext_none.h5
# h5format_convert -d /DSET_NONE h5fc_ext_none.h5
# h5format_convert -d /GROUP/DSET_NDATA_NONE h5fc_ext_none.h5
TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /DSET_EA
IDX_CHECK /DSET_EA
#
TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /GROUP/DSET_NDATA_EA
IDX_CHECK /GROUP/DSET_NDATA_EA
#
TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /GROUP/DSET_BT2
IDX_CHECK /GROUP/DSET_BT2
#
TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /DSET_NDATA_BT2
IDX_CHECK /DSET_NDATA_BT2
#
TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /DSET_FA
IDX_CHECK /DSET_FA
#
TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /GROUP/DSET_NDATA_FA
IDX_CHECK /GROUP/DSET_NDATA_FA
#
TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /DSET_NONE
IDX_CHECK /DSET_NONE
#
TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /GROUP/DSET_NDATA_NONE
IDX_CHECK /GROUP/DSET_NDATA_NONE
#
#
#
# No output from tests: just check exit code
# h5format_convert -d /DSET_NDATA_BT2 old_h5fc_ext_none.h5 (v1-btree dataset)
# h5format_convert -d /DSET_CONTIGUOUS h5fc_non_v3.h5 (non-chunked dataset)
TOOLTEST old_h5fc_ext_none.h5 $TMPFILE -d /DSET_NDATA_BT2
TOOLTEST h5fc_non_v3.h5 $TMPFILE -d /DSET_CONTIGUOUS
#
#
#
# No output from tests: just check exit code
# h5format_convert -d /GROUP/DSET_BT2 -n h5fc_non_v3.h5 (noop, one dataset)
# h5format_convert -n h5fc_non_v3.h5 (noop, all datasets)
TOOLTEST h5fc_non_v3.h5 $TMPFILE -d /GROUP/DSET_BT2 -n
TOOLTEST h5fc_non_v3.h5 $TMPFILE -n
#
#
#
# No output from tests: just check exit code
# h5format_convert h5fc_non_v3.h5
# 1) convert all datasets
# 2) verify indexing types
TOOLTEST h5fc_non_v3.h5 $TMPCHKFILE
IDX_CHECK /DSET_NDATA_EA
IDX_CHECK /DSET_NDATA_BT2
IDX_CHECK /GROUP/DSET_BT2
IDX_CHECK /GROUP/DSET_EA
#
#
#
# No output from test: just check exit code
# h5format_convert h5fc_edge_v3.h5
# 1) convert the chunked dataset (filter, no-filter-edge-chunk)
# 2) verify the indexing type
TOOLTEST h5fc_edge_v3.h5 $TMPCHKFILE
IDX_CHECK /DSET_EDGE
#
#

# The following test files have messages in the superblock extension.
# Verify h5dump output for correctness after conversion
TOOLTEST h5fc_ext1_i.h5 $TMPDMPFILE
H5DUMP_CHECK h5fc_ext1_i.h5 h5fc_ext1_i.ddl
TOOLTEST h5fc_ext1_s.h5 $TMPDMPFILE
H5DUMP_CHECK h5fc_ext1_s.h5 h5fc_ext1_s.ddl
TOOLTEST h5fc_ext1_f.h5 $TMPDMPFILE
H5DUMP_CHECK h5fc_ext1_f.h5 h5fc_ext1_f.ddl
#
TOOLTEST h5fc_ext2_if.h5 $TMPDMPFILE
H5DUMP_CHECK h5fc_ext2_if.h5 h5fc_ext2_if.ddl
TOOLTEST h5fc_ext2_is.h5 $TMPDMPFILE
H5DUMP_CHECK h5fc_ext2_is.h5 h5fc_ext2_is.ddl
TOOLTEST h5fc_ext2_sf.h5 $TMPDMPFILE
H5DUMP_CHECK h5fc_ext2_sf.h5 h5fc_ext2_sf.ddl
#
TOOLTEST h5fc_ext3_isf.h5 $TMPDMPFILE
H5DUMP_CHECK h5fc_ext3_isf.h5 h5fc_ext3_isf.ddl
#
#
#
TOOLTEST old_h5fc_ext1_i.h5 $TMPDMPFILE
H5DUMP_CHECK old_h5fc_ext1_i.h5 old_h5fc_ext1_i.ddl
TOOLTEST old_h5fc_ext1_s.h5 $TMPDMPFILE
H5DUMP_CHECK old_h5fc_ext1_s.h5 old_h5fc_ext1_s.ddl
TOOLTEST old_h5fc_ext1_f.h5 $TMPDMPFILE
H5DUMP_CHECK old_h5fc_ext1_f.h5 old_h5fc_ext1_f.ddl
#
TOOLTEST old_h5fc_ext2_if.h5 $TMPDMPFILE
H5DUMP_CHECK old_h5fc_ext2_if.h5 old_h5fc_ext2_if.ddl
TOOLTEST old_h5fc_ext2_is.h5 $TMPDMPFILE
H5DUMP_CHECK old_h5fc_ext2_is.h5 old_h5fc_ext2_is.ddl
TOOLTEST old_h5fc_ext2_sf.h5 $TMPDMPFILE
H5DUMP_CHECK old_h5fc_ext2_sf.h5 old_h5fc_ext2_sf.ddl
#
TOOLTEST old_h5fc_ext3_isf.h5 $TMPDMPFILE
H5DUMP_CHECK old_h5fc_ext3_isf.h5 old_h5fc_ext3_isf.ddl
#
# Clean up temporary files/directories
CLEAN_TESTFILES_AND_TESTDIR

if test $nerrors -eq 0 ; then
    echo "All $TESTNAME tests passed."
    exit $EXIT_SUCCESS
else
    echo "$TESTNAME tests failed with $nerrors errors."
    exit $EXIT_FAILURE
fi