path: root/windows/tools/h5repack/h5repack.bat

@echo off
rem

rem Copyright by The HDF Group.

rem Copyright by the Board of Trustees of the University of Illinois.

rem All rights reserved.

rem

rem This file is part of HDF5.  The full HDF5 copyright notice, including

rem terms governing use, modification, and redistribution, is contained in

rem the files COPYING and Copyright.html.  COPYING can be found at the root

rem of the source code distribution tree; Copyright.html can be found at the

rem root level of an installed copy of the electronic HDF5 document set and

rem is linked from the top-level documents page.  It can also be found at

rem http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have

rem access to either file, you may request a copy from help@hdfgroup.org.

rem

rem Tests for the h5repack tool

rem

rem    Created:  Scott Wegner, 8/28/07

rem    Modified:

rem


setlocal enabledelayedexpansion
pushd %~dp0

set h5pubconf=%CD%\..\..\src\h5pubconf.h

rem On Windows, the function :detect_filter sets these for us

call :detect_filter szip
call :detect_filter deflate
call :detect_filter shuffle
call :detect_filter fletcher32
call :detect_filter nbit
call :detect_filter scaleoffset

rem The tool name

set h5repack=h5repack%2
rem The path of the tool binary

set h5repack_bin=%CD%\..\%h5repack%\%1\%h5repack%

rem The h5diff tool name

set h5diff=..\h5diff%2\%1\h5diff%2
rem The path of the h5diff tool binary

set h5diff_bin=%CD%\%h5diff%

rem The tool name

set h5detectszip=testh5repack_detect_szip%2
rem The path of the tool binary

set h5detectszip_bin=%CD%\..\testfiles\%h5detectszip%\%1\%h5detectszip%


set info_file=..\testfiles\info.h5repack

set file0=h5repack_fill.h5
set file1=h5repack_objs.h5
set file2=h5repack_attr.h5
set file3=h5repack_hlink.h5
set file4=h5repack_layout.h5
set file5=h5repack_early.h5
set file7=h5repack_szip.h5
set file8=h5repack_deflate.h5
set file9=h5repack_shuffle.h5
set file10=h5repack_fletcher.h5
set file11=h5repack_filters.h5
set file12=h5repack_nbit.h5
set file13=h5repack_soffset.h5


set nerrors=0
set verbose=yes

if not exist ..\testfiles mkdir ..\testfiles

goto main


rem Print a line-line message left justified in a field of 70 characters

rem beginning with the word "Testing".

rem

:testing
    set test_msg=Testing
    for %%a in (%*) do (
        if %%a neq PASSED (
        if %%a neq *FAILED* (
            set test_msg=!test_msg! %%~nxa
        ) )
    )
    set test_msg=!test_msg!                                                                
    echo.%test_msg:~0,69% %1
    
    exit /b

    
rem Print a line-line message left justified in a field of 70 characters

rem beginning with the word "Verifying".

rem

:verify
    set test_msg=Verifying h5diff output
    for %%a in (%*) do (
        if %%a neq PASSED (
        if %%a neq *FAILED* (
            set test_msg=!test_msg! %%~nxa
        ) )
    )
    set test_msg=!test_msg!                                                                
    echo.%test_msg:~0,69% %1
    
    exit /b

    
rem Print a message that a test has been skipped (because a required filter

rem was unavailable)

:skip
    call :testing -SKIP- %h5repack% %*
    exit /b
    
    
rem Call the h5diff tool

rem

:difftest
    %h5diff_bin% -q -c %*
    if %errorlevel% neq 0 (
        call :verify *FAILED* %*
        set /a nerrors=!nerrors!+1
    ) else (
        call :verify PASSED %*
    )
    
    exit /b
    
    
rem Call h5repack

rem

:tooltest

    rem Run test.
    set infile=%CD%\..\testfiles\%1
    rem Linux uses a $path variable here, but it is unneccessary, and will
    rem corrupt our Windows PATH if we use it.  --SJW 8/28/07
    rem set path=%CD%
    rem set outfile=%path%\out.%1
    set outfile=%CD%\out.%1
    
    rem We define %params% here because Windows `shift` command doesn't affect
    rem the %* variable.  --SJW 8/28/07
    if "%2"=="" (

        set params=

    ) else (

        set params=%*

        set params=!params:* =!

    )

    %h5repack_bin% %params% %infile% %outfile%

    

    if %errorlevel% neq 0 (

        call :testing *FAILED* %*

        set /a nerrors=!nerrors!+1

    ) else (

        call :testing PASSED %*

        call :difftest %infile% %outfile%

    )

    del /f %outfile%

    

    exit /b

    

    

rem Call h5repack with old syntax

rem

:tooltest0



    rem Run test.

    set infile=%CD%\..\testfiles\%1

    rem Linux uses a $path variable here, but it is unneccessary, and will

    rem corrupt our Windows PATH if we use it.  --SJW 8/28/07

    rem set path=%CD%

    rem set outfile=%path%\out.%1

    set outfile=%CD%\out.%1

    

    rem We define %params% here because Windows `shift` command doesn't affect

    rem the %* variable.  --SJW 8/28/07

    if "%2"=="" (
        set params=
    ) else (
        set params=%*
        set params=!params:* =!
    )
    %h5repack_bin% -i %infile% -o %outfile% %params%
    
    if %errorlevel% neq 0 (
        call :testing *FAILED* %*
        set /a nerrors=!nerrors!+1
    ) else (
        call :testing PASSED %*
        call :difftest %infile% %outfile%
    )
    del /f %outfile%
    
    exit /b
    
    
rem This is a Windows-specific function that detects if the filter passed

rem should be enabled for this test script.  It searches H5pubconf.h for the

rem string "#define H5_HAVE_FILTER_%1" and sets the variable "use_filter_%1"

rem accordingly.  On other platforms, this variable is set in the Makefile.

rem If we find a better way to test this in the future, we should use it.

rem --SJW 9/4/07

:detect_filter
    findstr /b /i /c:"#define H5_HAVE_FILTER_%1" %h5pubconf% > nul

    if %errorlevel% equ 0 (

        set use_filter_%1=yes

    ) else (

        set use_filter_%1=no

    )

    

    exit /b





rem

rem The tests

rem We use the files generated by h5repacktst

rem Each run generates "<file>.out.h5" and the tool h5diff is used to

rem compare the input and output files

rem

rem the tests are the same as the program h5repacktst, but run from the CLI 

rem

:main



    rem See which filters are usable (and skip tests for filters we

    rem don't have).  Do this by searching H5pubconf.h to see which

    rem filters are defined.



    rem detect whether the encoder is present. 

    set use_filter_szip_encoder=no

    if "%use_filter_szip%"=="yes" (
        for /f %%a in ('%h5detectszip_bin%') do set use_filter_szip_encoder=%%a
    )

    rem copy files (these files have no filters) 
    call :tooltest %file0%
    call :tooltest %file1%
    call :tooltest %file2%
    call :tooltest %file3%
    call :tooltest %file4%
    call :tooltest %file5%


    rem use %file4% to write some filters  (this file has  no filters)

    rem gzip with individual object
    set arg=%file4% -f dset1:GZIP=1  -l dset1:CHUNK=20x10
    if not "%use_filter_deflate%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )

      

    rem gzip for all 

    set arg=%file4% -f GZIP=1

    if not "%use_filter_deflate%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem szip with individual object
    set arg=%file4% -f dset2:SZIP=8,EC  -l dset2:CHUNK=20x10
    if not "%use_filter_szip_encoder%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_szip%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem szip for all
    set arg=%file4% -f SZIP=8,NN
    if not "%use_filter_szip_encoder%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_szip%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg% 
    )

    rem shuffle with individual object
    set arg=%file4% -f dset2:SHUF  -l dset2:CHUNK=20x10
    if not "%use_filter_shuffle%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg% 

    )

      



    rem shuffle for all

    set arg=%file4% -f SHUF

    if not "%use_filter_shuffle%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )
      
    rem fletcher32  with individual object
    set arg=%file4% -f dset2:FLET  -l dset2:CHUNK=20x10
    if not "%use_filter_fletcher32%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )



    rem fletcher32 for all

    set arg=%file4% -f FLET

    if not "%use_filter_fletcher32%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem all filters
    set arg=%file4% -f dset2:SHUF -f dset2:FLET -f dset2:SZIP=8,NN -f dset2:GZIP=1 -l dset2:CHUNK=20x10
    rem On Windows we must check each filter individually, because we don't have
    rem -o flag like Linux.  --SJW 8/28/07
    if not "%use_filter_szip_encoder%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_szip%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_shuffle%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_fletcher32%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_deflate%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )

      

    rem ##########################################################

    rem  the following tests assume the input files have filters

    rem ##########################################################



    rem szip copy

    set arg=%file7%

    if not "%use_filter_szip_encoder%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_szip%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )

      

    rem szip remove

    set arg=%file7% --filter=dset_szip:NONE

    if not "%use_filter_szip_encoder%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_szip%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )

      

    rem deflate copy

    set arg=%file8%

    if not "%use_filter_deflate%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem deflate remove
    set arg=%file8% -f dset_deflate:NONE
    if not "%use_filter_deflate%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )

        

    rem shuffle copy

    set arg=%file9%

    if not "%use_filter_shuffle%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem shuffle remove
    set arg=%file9% -f dset_shuffle:NONE
    if not "%use_filter_shuffle%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )



    rem fletcher32 copy

    set arg=%file10%

    if not "%use_filter_fletcher32%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem fletcher32 remove
    set arg=%file10% -f dset_fletcher32:NONE
    if not "%use_filter_fletcher32%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )



    rem nbit copy

    set arg=%file12%

    if not "%use_filter_nbit%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem nbit remove
    set arg=%file12% -f dset_nbit:NONE
    if not "%use_filter_nbit%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )



    rem nbit add

    set arg=%file12% -f dset_int31:NBIT

    if not "%use_filter_nbit%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem scaleoffset copy
    set arg=%file13%
    if not "%use_filter_scaleoffset%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )



    rem scaleoffset add

    set arg=%file13% -f dset_none:SOFF=31,IN

    if not "%use_filter_scaleoffset%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem scaleoffset remove
    set arg=%file13% -f dset_scaleoffset:NONE
    if not "%use_filter_scaleoffset%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )



    rem remove all  filters

    set arg=%file11% -f NONE

    if not "%use_filter_fletcher32%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_deflate%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_szip%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_szip_encoder%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_shuffle%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_nbit%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_scaleoffset%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem filter conversions

    set arg=%file8% -f dset_deflate:SZIP=8,NN
    if not "%use_filter_szip_encoder%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_szip%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_deflate%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg% 

    )



    set arg=%file7% -f dset_szip:GZIP=1

    if not "%use_filter_szip_encoder%"=="yes" (
        call :skip %arg%
    ) else if not "%use_filter_szip%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_deflate%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg% 
    )


    rem limit
    set arg=%file4% -f GZIP=1 -m 1024
    if not "%use_filter_deflate%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest %arg%

    )



    rem file

    set arg=%file4% -e %info_file%

    if not "%use_filter_deflate%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )


    rem ########################################################
    rem  layout options (these files have no filters)
    rem ########################################################

    call :tooltest %file4% --layout=dset2:CHUNK=20x10
    call :tooltest %file4% -l CHUNK=20x10
    call :tooltest %file4% -l dset2:CONTI
    call :tooltest %file4% -l CONTI
    call :tooltest %file4% -l dset2:COMPA
    call :tooltest %file4% -l COMPA


    rem ###############################################################
    rem  layout conversions (file has no filters)
    rem ##############################################################

    set arg1=%file4% -l dset_compact:CONTI
    set arg2=%file4% -l dset_compact:CHUNK=2x5
    set arg3=%file4% -l dset_compact:COMPA
    set arg4=%file4% -l dset_contiguous:COMPA
    set arg5=%file4% -l dset_contiguous:CHUNK=3x6
    set arg6=%file4% -l dset_contiguous:CONTI
    set arg7=%file4% -l dset_chunk:COMPA
    set arg8=%file4% -l dset_chunk:CONTI
    set arg9=%file4% -l dset_chunk:CHUNK=18x13
    call :tooltest %arg1%
    call :tooltest %arg2%
    call :tooltest %arg3%
    call :tooltest %arg4%
    call :tooltest %arg5%
    call :tooltest %arg6%
    call :tooltest %arg7%
    call :tooltest %arg8%
    call :tooltest %arg9%

    rem Native option
    set arg=%file1% -n
    call :tooltest %arg%


    rem latest file format with long switches. use FILE4=h5repack_layout.h5 (no filters)
    set arg=%file4% --layout CHUNK=20x10 --filter GZIP=1 --minimum=10 --native --latest --compact=8 --indexed=6 --ssize=8[:dtype]
    if not "%use_filter_deflate%"=="yes" (

       call :skip %arg%

    ) else (

       call :tooltest %arg%

    )



    rem latest file format with short switches. use FILE4=h5repack_layout.h5 (no filters)

    set arg=%file4% -l CHUNK=20x10 -f GZIP=1 -m 10 -n -L -c 8 -d 6 -s 8[:dtype]

    if not "%use_filter_deflate%"=="yes" (
     call :skip %arg%
    ) else (
     call :tooltest %arg%
    )
    
    rem several global filters

    set arg=%file4% --filter GZIP=1 --filter SHUF
    if not "%use_filter_deflate%"=="yes" (

        call :skip %arg%

    ) else if not "%use_filter_shuffle%"=="yes" (
        call :skip %arg%
    ) else (
        call :tooltest %arg%
    )

    rem syntax of -i infile -o outfile
    rem latest file format with short switches. use FILE4=h5repack_layout.h5 (no filters)
    set arg=%file4% -l CHUNK=20x10 -f GZIP=1 -m 10 -n -L -c 8 -d 6 -s 8[:dtype]
    if not "%use_filter_deflate%"=="yes" (

        call :skip %arg%

    ) else (

        call :tooltest0 %arg%

    )

    

    rem add a userblock to file

    set arg=%file1% -u ublock.bin -b 2048

    call :tooltest %arg%

    

    rem add alignment

    set arg=%file1% -t 1 -a 1

    call :tooltest %arg%

    

    

    if %nerrors% equ 0 (

        echo.All %h5repack% tests passed.

    )

    

    popd

    endlocal & exit /b %nerrors%