include/linux: add all linux headers that we use

It doesn't work well, to only include some parts of the linux headers.
For example, <linux/ipv6.h> includes <linux/stddef.h>, which previously
wasn't copied. Worse, <linux/ipv6.h> depends on some recent defines in
<linux/stddef.h>, so we cannot just mix kernel headers from different
versions.

Import all the used <linux/*> kernel headers.  Note that architecture
specific headers from "<asm/*" and "<asm-generic/*" are not copied.

Taken from v6.4 (6995e2de6891c724bfeb2db33d7b87775f913ad1).

Reimport via

  cd /data/src/linux
  make headers_install ARCH=i386 INSTALL_HDR_PATH=/tmp/Linux/

  cd /data/src/libnl3
  for h in $(cd include/linux-private/; git ls-files .); do \
    /bin/cp /tmp/Linux/include/$h include/linux-private/$h ; \
  done

26 files changed, 4291 insertions, 0 deletions

diff --git a/Makefile.am b/Makefile.am
index b466261..29748d9 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -241,10 +241,20 @@ public_headers = \
 
 noinst_HEADERS = \
 	include/base/nl-base-utils.h \
+	include/linux-private/linux/atm.h \
+	include/linux-private/linux/atmapi.h \
+	include/linux-private/linux/atmioc.h \
+	include/linux-private/linux/atmsap.h \
+	include/linux-private/linux/byteorder/little_endian.h \
 	include/linux-private/linux/can/netlink.h \
+	include/linux-private/linux/const.h \
+	include/linux-private/linux/errno.h \
+	include/linux-private/linux/ethtool.h \
+	include/linux-private/linux/falloc.h \
 	include/linux-private/linux/fib_rules.h \
 	include/linux-private/linux/gen_stats.h \
 	include/linux-private/linux/genetlink.h \
+	include/linux-private/linux/hdlc/ioctl.h \
 	include/linux-private/linux/if.h \
 	include/linux-private/linux/if_addr.h \
 	include/linux-private/linux/if_arp.h \
@@ -252,21 +262,27 @@ noinst_HEADERS = \
 	include/linux-private/linux/if_ether.h \
 	include/linux-private/linux/if_link.h \
 	include/linux-private/linux/if_macsec.h \
+	include/linux-private/linux/if_packet.h \
 	include/linux-private/linux/if_tunnel.h \
 	include/linux-private/linux/if_vlan.h \
 	include/linux-private/linux/in.h \
 	include/linux-private/linux/in6.h \
+	include/linux-private/linux/in_route.h \
 	include/linux-private/linux/inet_diag.h \
+	include/linux-private/linux/ioctl.h \
 	include/linux-private/linux/ip.h \
 	include/linux-private/linux/ipv6.h \
 	include/linux-private/linux/libc-compat.h \
+	include/linux-private/linux/limits.h \
 	include/linux-private/linux/lwtunnel.h \
 	include/linux-private/linux/mpls.h \
 	include/linux-private/linux/mpls_iptunnel.h \
 	include/linux-private/linux/neighbour.h \
 	include/linux-private/linux/netconf.h \
+	include/linux-private/linux/netdevice.h \
 	include/linux-private/linux/netfilter.h \
 	include/linux-private/linux/netfilter/nf_conntrack_common.h \
+	include/linux-private/linux/netfilter/nf_conntrack_tcp.h \
 	include/linux-private/linux/netfilter/nfnetlink.h \
 	include/linux-private/linux/netfilter/nfnetlink_compat.h \
 	include/linux-private/linux/netfilter/nfnetlink_conntrack.h \
@@ -276,16 +292,25 @@ noinst_HEADERS = \
 	include/linux-private/linux/nexthop.h \
 	include/linux-private/linux/pkt_cls.h \
 	include/linux-private/linux/pkt_sched.h \
+	include/linux-private/linux/posix_types.h \
 	include/linux-private/linux/rtnetlink.h \
 	include/linux-private/linux/snmp.h \
 	include/linux-private/linux/sock_diag.h \
 	include/linux-private/linux/socket.h \
+	include/linux-private/linux/stddef.h \
+	include/linux-private/linux/swab.h \
+	include/linux-private/linux/taskstats.h \
 	include/linux-private/linux/tc_act/tc_gact.h \
 	include/linux-private/linux/tc_act/tc_mirred.h \
 	include/linux-private/linux/tc_act/tc_nat.h \
 	include/linux-private/linux/tc_act/tc_skbedit.h \
 	include/linux-private/linux/tc_act/tc_vlan.h \
+	include/linux-private/linux/tc_ematch/tc_em_cmp.h \
 	include/linux-private/linux/tc_ematch/tc_em_meta.h \
+	include/linux-private/linux/tc_ematch/tc_em_nbyte.h \
+	include/linux-private/linux/tc_ematch/tc_em_text.h \
+	include/linux-private/linux/types.h \
+	include/linux-private/linux/version.h \
 	include/linux-private/linux/veth.h \
 	include/linux-private/linux/xfrm.h \
 	include/nl-aux-core/nl-core.h \
diff --git a/include/linux-private/linux/atm.h b/include/linux-private/linux/atm.h
new file mode 100644
index 0000000..e33ff6b
--- /dev/null
+++ b/include/linux-private/linux/atm.h
@@ -0,0 +1,242 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* atm.h - general ATM declarations */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+/*
+ * WARNING: User-space programs should not #include <linux/atm.h> directly.
+ *          Instead, #include <atm.h>
+ */
+
+#ifndef _LINUX_ATM_H
+#define _LINUX_ATM_H
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+
+#include <linux/atmapi.h>
+#include <linux/atmsap.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/* general ATM constants */
+#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
+#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
+#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
+#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
+#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
+#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
+#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
+#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
+
+#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
+#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
+#define ATM_MAX_VCI		 65535	/* maximum VCI */
+
+
+/* "protcol" values for the socket system call */
+#define ATM_NO_AAL	0		/* AAL not specified */
+#define ATM_AAL0	13		/* "raw" ATM cells */
+#define ATM_AAL1	1		/* AAL1 (CBR) */
+#define ATM_AAL2	2		/* AAL2 (VBR) */
+#define ATM_AAL34	3		/* AAL3/4 (data) */
+#define ATM_AAL5	5		/* AAL5 (data) */
+
+/*
+ * socket option name coding functions
+ *
+ * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
+ * << 22 only reserves 9 bits for the level.  On some architectures
+ * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
+ */
+
+#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
+				sizeof(t))
+#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
+#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
+#define __SO_SIZE(c)		((c) & 0x3fff)
+
+/*
+ * ATM layer
+ */
+
+#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
+			    /* set CLP bit value - TODO */
+#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
+			    /* connection identifier range; socket must be
+			       bound or connected */
+#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
+			    /* Quality of Service setting */
+#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
+			    /* Service Access Point */
+#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
+			    /* "PVC" address (also for SVCs); get only */
+#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
+			    /* make this vc a p2mp */
+
+
+/*
+ * Note @@@: since the socket layers don't really distinguish the control and
+ * the data plane but generally seems to be data plane-centric, any layer is
+ * about equally wrong for the SAP. If you have a better idea about this,
+ * please speak up ...
+ */
+
+
+/* ATM cell header (for AAL0) */
+
+/* BEGIN_CH */
+#define ATM_HDR_GFC_MASK	0xf0000000
+#define ATM_HDR_GFC_SHIFT	28
+#define ATM_HDR_VPI_MASK	0x0ff00000
+#define ATM_HDR_VPI_SHIFT	20
+#define ATM_HDR_VCI_MASK	0x000ffff0
+#define ATM_HDR_VCI_SHIFT	4
+#define ATM_HDR_PTI_MASK	0x0000000e
+#define ATM_HDR_PTI_SHIFT	1
+#define ATM_HDR_CLP		0x00000001
+/* END_CH */
+
+
+/* PTI codings */
+
+/* BEGIN_PTI */
+#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
+#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
+#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
+#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
+#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
+#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
+#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
+#define ATM_PTI_RSV	7  /* reserved */
+/* END_PTI */
+
+
+/*
+ * The following items should stay in linux/atm.h, which should be linked to
+ * netatm/atm.h
+ */
+
+/* Traffic description */
+
+#define ATM_NONE	0		/* no traffic */
+#define ATM_UBR		1
+#define ATM_CBR		2
+#define ATM_VBR		3
+#define ATM_ABR		4
+#define ATM_ANYCLASS	5		/* compatible with everything */
+
+#define ATM_MAX_PCR	-1		/* maximum available PCR */
+
+struct atm_trafprm {
+	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
+	int		max_pcr;	/* maximum PCR in cells per second */
+	int		pcr;		/* desired PCR in cells per second */
+	int		min_pcr;	/* minimum PCR in cells per second */
+	int		max_cdv;	/* maximum CDV in microseconds */
+	int		max_sdu;	/* maximum SDU in bytes */
+        /* extra params for ABR */
+        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
+        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
+        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
+        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
+        unsigned int nrm_pres  :1;      /* nrm present bit */
+        unsigned int trm_pres  :1;     	/* rm present bit */
+        unsigned int adtf_pres :1;     	/* adtf present bit */
+        unsigned int cdf_pres  :1;    	/* cdf present bit*/
+        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
+        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
+	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
+	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
+        unsigned int spare     :9;      /* spare bits */ 
+};
+
+struct atm_qos {
+	struct atm_trafprm txtp;	/* parameters in TX direction */
+	struct atm_trafprm rxtp __ATM_API_ALIGN;
+					/* parameters in RX direction */
+	unsigned char aal __ATM_API_ALIGN;
+};
+
+/* PVC addressing */
+
+#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
+#define ATM_VPI_ANY	-1
+#define ATM_VCI_ANY	-1
+#define ATM_VPI_UNSPEC	-2
+#define ATM_VCI_UNSPEC	-2
+
+
+struct sockaddr_atmpvc {
+	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
+	struct {			/* PVC address */
+		short	itf;		/* ATM interface */
+		short	vpi;		/* VPI (only 8 bits at UNI) */
+		int	vci;		/* VCI (only 16 bits at UNI) */
+	} sap_addr __ATM_API_ALIGN;	/* PVC address */
+};
+
+/* SVC addressing */
+
+#define	ATM_ESA_LEN	20		/* ATM End System Address length */
+#define ATM_E164_LEN	12		/* maximum E.164 number length */
+
+#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
+#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
+#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
+#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
+
+#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
+#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
+#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
+#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
+
+#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
+#define ATM_LIJ		1		/* request joining */
+#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
+#define ATM_LIJ_NJ	3		/* set to network join */
+
+
+struct sockaddr_atmsvc {
+    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
+    struct {				/* SVC address */
+        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
+        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
+    					/* unused addresses must be bzero'ed */
+	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
+	__u32	lij_id;		/* LIJ call identifier */
+    } sas_addr __ATM_API_ALIGN;		/* SVC address */
+};
+
+
+static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
+{
+	return *addr.sas_addr.prv || *addr.sas_addr.pub;
+}
+
+
+static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
+{
+	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
+}
+
+
+/*
+ * Some stuff for linux/sockios.h
+ */
+
+struct atmif_sioc {
+	int number;
+	int length;
+	void *arg;
+};
+
+
+typedef unsigned short atm_backend_t;
+#endif /* _LINUX_ATM_H */
diff --git a/include/linux-private/linux/atmapi.h b/include/linux-private/linux/atmapi.h
new file mode 100644
index 0000000..c9bf5c2
--- /dev/null
+++ b/include/linux-private/linux/atmapi.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* atmapi.h - ATM API user space/kernel compatibility */
+ 
+/* Written 1999,2000 by Werner Almesberger, EPFL ICA */
+ 
+
+#ifndef _LINUX_ATMAPI_H
+#define _LINUX_ATMAPI_H
+
+#if defined(__sparc__) || defined(__ia64__)
+/* such alignment is not required on 32 bit sparcs, but we can't
+   figure that we are on a sparc64 while compiling user-space programs. */
+#define __ATM_API_ALIGN	__attribute__((aligned(8)))
+#else
+#define __ATM_API_ALIGN
+#endif
+
+
+/*
+ * Opaque type for kernel pointers. Note that _ is never accessed. We need
+ * the struct in order hide the array, so that we can make simple assignments
+ * instead of being forced to use memcpy. It also improves error reporting for
+ * code that still assumes that we're passing unsigned longs.
+ *
+ * Convention: NULL pointers are passed as a field of all zeroes.
+ */
+ 
+typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
+
+#endif
diff --git a/include/linux-private/linux/atmioc.h b/include/linux-private/linux/atmioc.h
new file mode 100644
index 0000000..a9030bc
--- /dev/null
+++ b/include/linux-private/linux/atmioc.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* atmioc.h - ranges for ATM-related ioctl numbers */
+ 
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+/*
+ * See https://icawww1.epfl.ch/linux-atm/magic.html for the complete list of
+ * "magic" ioctl numbers.
+ */
+
+
+#ifndef _LINUX_ATMIOC_H
+#define _LINUX_ATMIOC_H
+
+#include <asm/ioctl.h>
+		/* everybody including atmioc.h will also need _IO{,R,W,WR} */
+
+#define ATMIOC_PHYCOM	  0x00 /* PHY device common ioctls, globally unique */
+#define ATMIOC_PHYCOM_END 0x0f
+#define ATMIOC_PHYTYP	  0x10 /* PHY dev type ioctls, unique per PHY type */
+#define ATMIOC_PHYTYP_END 0x2f
+#define ATMIOC_PHYPRV	  0x30 /* PHY dev private ioctls, unique per driver */
+#define ATMIOC_PHYPRV_END 0x4f
+#define ATMIOC_SARCOM	  0x50 /* SAR device common ioctls, globally unique */
+#define ATMIOC_SARCOM_END 0x50
+#define ATMIOC_SARPRV	  0x60 /* SAR dev private ioctls, unique per driver */
+#define ATMIOC_SARPRV_END 0x7f
+#define ATMIOC_ITF	  0x80 /* Interface ioctls, globally unique */
+#define ATMIOC_ITF_END	  0x8f
+#define ATMIOC_BACKEND	  0x90 /* ATM generic backend ioctls, u. per backend */
+#define ATMIOC_BACKEND_END 0xaf
+/* 0xb0-0xbf: Reserved for future use */
+#define ATMIOC_AREQUIPA	  0xc0 /* Application requested IP over ATM, glob. u. */
+#define ATMIOC_LANE	  0xd0 /* LAN Emulation, globally unique */
+#define ATMIOC_MPOA       0xd8 /* MPOA, globally unique */
+#define	ATMIOC_CLIP	  0xe0 /* Classical IP over ATM control, globally u. */
+#define	ATMIOC_CLIP_END	  0xef
+#define	ATMIOC_SPECIAL	  0xf0 /* Special-purpose controls, globally unique */
+#define	ATMIOC_SPECIAL_END 0xff
+
+#endif
diff --git a/include/linux-private/linux/atmsap.h b/include/linux-private/linux/atmsap.h
new file mode 100644
index 0000000..fc05248
--- /dev/null
+++ b/include/linux-private/linux/atmsap.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* atmsap.h - ATM Service Access Point addressing definitions */
+
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _LINUX_ATMSAP_H
+#define _LINUX_ATMSAP_H
+
+#include <linux/atmapi.h>
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+
+/*
+ * Layer 2 protocol identifiers
+ */
+
+/* BEGIN_L2 */
+#define ATM_L2_NONE	0	/* L2 not specified */
+#define ATM_L2_ISO1745  0x01	/* Basic mode ISO 1745 */
+#define ATM_L2_Q291	0x02	/* ITU-T Q.291 (Rec. I.441) */
+#define ATM_L2_X25_LL	0x06	/* ITU-T X.25, link layer */
+#define ATM_L2_X25_ML	0x07	/* ITU-T X.25, multilink */
+#define ATM_L2_LAPB	0x08	/* Extended LAPB, half-duplex (Rec. T.71) */
+#define ATM_L2_HDLC_ARM	0x09	/* HDLC ARM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_NRM	0x0a	/* HDLC NRM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_ABM	0x0b	/* HDLC ABM (ISO/IEC 4335) */
+#define ATM_L2_ISO8802	0x0c	/* LAN LLC (ISO/IEC 8802/2) */
+#define ATM_L2_X75	0x0d	/* ITU-T X.75, SLP */
+#define ATM_L2_Q922	0x0e	/* ITU-T Q.922 */
+#define ATM_L2_USER	0x10	/* user-specified */
+#define ATM_L2_ISO7776	0x11	/* ISO 7776 DTE-DTE */
+/* END_L2 */
+
+
+/*
+ * Layer 3 protocol identifiers
+ */
+
+/* BEGIN_L3 */
+#define ATM_L3_NONE	0	/* L3 not specified */
+#define ATM_L3_X25	0x06	/* ITU-T X.25, packet layer */
+#define ATM_L3_ISO8208	0x07	/* ISO/IEC 8208 */
+#define ATM_L3_X223	0x08	/* ITU-T X.223 | ISO/IEC 8878 */
+#define ATM_L3_ISO8473	0x09	/* ITU-T X.233 | ISO/IEC 8473 */
+#define ATM_L3_T70	0x0a	/* ITU-T T.70 minimum network layer */
+#define ATM_L3_TR9577	0x0b	/* ISO/IEC TR 9577 */
+#define ATM_L3_H310	0x0c	/* ITU-T Recommendation H.310 */
+#define ATM_L3_H321	0x0d	/* ITU-T Recommendation H.321 */
+#define ATM_L3_USER	0x10	/* user-specified */
+/* END_L3 */
+
+
+/*
+ * High layer identifiers
+ */
+
+/* BEGIN_HL */
+#define ATM_HL_NONE	0	/* HL not specified */
+#define ATM_HL_ISO	0x01	/* ISO */
+#define ATM_HL_USER	0x02	/* user-specific */
+#define ATM_HL_HLP	0x03	/* high layer profile - UNI 3.0 only */
+#define ATM_HL_VENDOR	0x04	/* vendor-specific application identifier */
+/* END_HL */
+
+
+/*
+ * ITU-T coded mode of operation
+ */
+
+/* BEGIN_IMD */
+#define ATM_IMD_NONE	 0	/* mode not specified */
+#define ATM_IMD_NORMAL	 1	/* normal mode of operation */
+#define ATM_IMD_EXTENDED 2	/* extended mode of operation */
+/* END_IMD */
+
+/*
+ * H.310 code points
+ */
+
+#define ATM_TT_NONE	0	/* terminal type not specified */
+#define ATM_TT_RX	1	/* receive only */
+#define ATM_TT_TX	2	/* send only */
+#define ATM_TT_RXTX	3	/* receive and send */
+
+#define ATM_MC_NONE	0	/* no multiplexing */
+#define ATM_MC_TS	1	/* transport stream (TS) */
+#define ATM_MC_TS_FEC	2	/* transport stream with forward error corr. */
+#define ATM_MC_PS	3	/* program stream (PS) */
+#define ATM_MC_PS_FEC	4	/* program stream with forward error corr. */
+#define ATM_MC_H221	5	/* ITU-T Rec. H.221 */
+
+/*
+ * SAP structures
+ */
+
+#define ATM_MAX_HLI	8	/* maximum high-layer information length */
+
+
+struct atm_blli {
+    unsigned char l2_proto;	/* layer 2 protocol */
+    union {
+	struct {
+	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
+				/* absent */
+	    unsigned char window; /* window size (k), 1-127 (0 to omit) */
+	} itu;			/* ITU-T encoding */
+	unsigned char user;	/* user-specified l2 information */
+    } l2;
+    unsigned char l3_proto;	/* layer 3 protocol */
+    union {
+	struct {
+	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
+				/* absent */
+	    unsigned char def_size; /* default packet size (log2), 4-12 (0 to */
+				    /* omit) */
+	    unsigned char window;/* packet window size, 1-127 (0 to omit) */
+	} itu;			/* ITU-T encoding */
+	unsigned char user;	/* user specified l3 information */
+	struct {		      /* if l3_proto = ATM_L3_H310 */
+	    unsigned char term_type;  /* terminal type */
+	    unsigned char fw_mpx_cap; /* forward multiplexing capability */
+				      /* only if term_type != ATM_TT_NONE */
+	    unsigned char bw_mpx_cap; /* backward multiplexing capability */
+				      /* only if term_type != ATM_TT_NONE */
+	} h310;
+	struct {		  /* if l3_proto = ATM_L3_TR9577 */
+	    unsigned char ipi;	  /* initial protocol id */
+	    unsigned char snap[5];/* IEEE 802.1 SNAP identifier */
+				  /* (only if ipi == NLPID_IEEE802_1_SNAP) */
+	} tr9577;
+    } l3;
+} __ATM_API_ALIGN;
+
+
+struct atm_bhli {
+    unsigned char hl_type;	/* high layer information type */
+    unsigned char hl_length;	/* length (only if hl_type == ATM_HL_USER || */
+				/* hl_type == ATM_HL_ISO) */
+    unsigned char hl_info[ATM_MAX_HLI];/* high layer information */
+};
+
+
+#define ATM_MAX_BLLI	3		/* maximum number of BLLI elements */
+
+
+struct atm_sap {
+	struct atm_bhli bhli;		/* local SAP, high-layer information */
+	struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN;
+					/* local SAP, low-layer info */
+};
+
+
+static __inline__ int blli_in_use(struct atm_blli blli)
+{
+	return blli.l2_proto || blli.l3_proto;
+}
+
+#endif
diff --git a/include/linux-private/linux/byteorder/little_endian.h b/include/linux-private/linux/byteorder/little_endian.h
new file mode 100644
index 0000000..ba6c199
--- /dev/null
+++ b/include/linux-private/linux/byteorder/little_endian.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
+#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
+
+#ifndef __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN 1234
+#endif
+#ifndef __LITTLE_ENDIAN_BITFIELD
+#define __LITTLE_ENDIAN_BITFIELD
+#endif
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__be32)___constant_swab32((x)))
+#define __constant_ntohl(x) ___constant_swab32((__be32)(x))
+#define __constant_htons(x) ((__be16)___constant_swab16((x)))
+#define __constant_ntohs(x) ___constant_swab16((__be16)(x))
+#define __constant_cpu_to_le64(x) ((__le64)(__u64)(x))
+#define __constant_le64_to_cpu(x) ((__u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__le32)(__u32)(x))
+#define __constant_le32_to_cpu(x) ((__u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__le16)(__u16)(x))
+#define __constant_le16_to_cpu(x) ((__u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__be64)___constant_swab64((x)))
+#define __constant_be64_to_cpu(x) ___constant_swab64((__u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__be32)___constant_swab32((x)))
+#define __constant_be32_to_cpu(x) ___constant_swab32((__u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__be16)___constant_swab16((x)))
+#define __constant_be16_to_cpu(x) ___constant_swab16((__u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__le64)(__u64)(x))
+#define __le64_to_cpu(x) ((__u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__le32)(__u32)(x))
+#define __le32_to_cpu(x) ((__u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__le16)(__u16)(x))
+#define __le16_to_cpu(x) ((__u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__be64)__swab64((x)))
+#define __be64_to_cpu(x) __swab64((__u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__be32)__swab32((x)))
+#define __be32_to_cpu(x) __swab32((__u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__be16)__swab16((x)))
+#define __be16_to_cpu(x) __swab16((__u16)(__be16)(x))
+
+static __always_inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__le64)*p;
+}
+static __always_inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return (__u64)*p;
+}
+static __always_inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__le32)*p;
+}
+static __always_inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return (__u32)*p;
+}
+static __always_inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__le16)*p;
+}
+static __always_inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return (__u16)*p;
+}
+static __always_inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__be64)__swab64p(p);
+}
+static __always_inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static __always_inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__be32)__swab32p(p);
+}
+static __always_inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static __always_inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__be16)__swab16p(p);
+}
+static __always_inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be64s(x) __swab64s((x))
+#define __be64_to_cpus(x) __swab64s((x))
+#define __cpu_to_be32s(x) __swab32s((x))
+#define __be32_to_cpus(x) __swab32s((x))
+#define __cpu_to_be16s(x) __swab16s((x))
+#define __be16_to_cpus(x) __swab16s((x))
+
+
+#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux-private/linux/const.h b/include/linux-private/linux/const.h
new file mode 100644
index 0000000..1eb84b5
--- /dev/null
+++ b/include/linux-private/linux/const.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* const.h: Macros for dealing with constants.  */
+
+#ifndef _LINUX_CONST_H
+#define _LINUX_CONST_H
+
+/* Some constant macros are used in both assembler and
+ * C code.  Therefore we cannot annotate them always with
+ * 'UL' and other type specifiers unilaterally.  We
+ * use the following macros to deal with this.
+ *
+ * Similarly, _AT() will cast an expression with a type in C, but
+ * leave it unchanged in asm.
+ */
+
+#ifdef __ASSEMBLY__
+#define _AC(X,Y)	X
+#define _AT(T,X)	X
+#else
+#define __AC(X,Y)	(X##Y)
+#define _AC(X,Y)	__AC(X,Y)
+#define _AT(T,X)	((T)(X))
+#endif
+
+#define _UL(x)		(_AC(x, UL))
+#define _ULL(x)		(_AC(x, ULL))
+
+#define _BITUL(x)	(_UL(1) << (x))
+#define _BITULL(x)	(_ULL(1) << (x))
+
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+
+#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+
+#endif /* _LINUX_CONST_H */
diff --git a/include/linux-private/linux/errno.h b/include/linux-private/linux/errno.h
new file mode 100644
index 0000000..70f2bd3
--- /dev/null
+++ b/include/linux-private/linux/errno.h
@@ -0,0 +1 @@
+#include <asm/errno.h>
diff --git a/include/linux-private/linux/ethtool.h b/include/linux-private/linux/ethtool.h
new file mode 100644
index 0000000..1d0731b
--- /dev/null
+++ b/include/linux-private/linux/ethtool.h
@@ -0,0 +1,2206 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+#include <linux/const.h>
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#include <limits.h> /* for INT_MAX */
+
+/* All structures exposed to userland should be defined such that they
+ * have the same layout for 32-bit and 64-bit userland.
+ */
+
+/* Note on reserved space.
+ * Reserved fields must not be accessed directly by user space because
+ * they may be replaced by a different field in the future. They must
+ * be initialized to zero before making the request, e.g. via memset
+ * of the entire structure or implicitly by not being set in a structure
+ * initializer.
+ */
+
+/**
+ * struct ethtool_cmd - DEPRECATED, link control and status
+ * This structure is DEPRECATED, please use struct ethtool_link_settings.
+ * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET
+ * @supported: Bitmask of %SUPPORTED_* flags for the link modes,
+ *	physical connectors and other link features for which the
+ *	interface supports autonegotiation or auto-detection.
+ *	Read-only.
+ * @advertising: Bitmask of %ADVERTISED_* flags for the link modes,
+ *	physical connectors and other link features that are
+ *	advertised through autonegotiation or enabled for
+ *	auto-detection.
+ * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ *	applicable.  For clause 45 PHYs this is the PRTAD.
+ * @transceiver: Historically used to distinguish different possible
+ *	PHY types, but not in a consistent way.  Deprecated.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ *	either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ *	protocols supported by the interface; 0 if unknown.
+ *	Read-only.
+ * @maxtxpkt: Historically used to report TX IRQ coalescing; now
+ *	obsoleted by &struct ethtool_coalesce.  Read-only; deprecated.
+ * @maxrxpkt: Historically used to report RX IRQ coalescing; now
+ *	obsoleted by &struct ethtool_coalesce.  Read-only; deprecated.
+ * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ *	%ETH_TP_MDI_*.  If the status is unknown or not applicable, the
+ *	value will be %ETH_TP_MDI_INVALID.  Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ *	%ETH_TP_MDI_*.  If MDI(-X) control is not implemented, reads
+ *	yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ *	When written successfully, the link should be renegotiated if
+ *	necessary.
+ * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes
+ *	and other link features that the link partner advertised
+ *	through autonegotiation; 0 if unknown or not applicable.
+ *	Read-only.
+ * @reserved: Reserved for future use; see the note on reserved space.
+ *
+ * The link speed in Mbps is split between @speed and @speed_hi.  Use
+ * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
+ * access it.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes.  If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted.  For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver.  They should use
+ * %ETHTOOL_GSET to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SSET.
+ *
+ * Deprecated fields should be ignored by both users and drivers.
+ */
+struct ethtool_cmd {
+	__u32	cmd;
+	__u32	supported;
+	__u32	advertising;
+	__u16	speed;
+	__u8	duplex;
+	__u8	port;
+	__u8	phy_address;
+	__u8	transceiver;
+	__u8	autoneg;
+	__u8	mdio_support;
+	__u32	maxtxpkt;
+	__u32	maxrxpkt;
+	__u16	speed_hi;
+	__u8	eth_tp_mdix;
+	__u8	eth_tp_mdix_ctrl;
+	__u32	lp_advertising;
+	__u32	reserved[2];
+};
+
+static __inline__ void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+					 __u32 speed)
+{
+	ep->speed = (__u16)(speed & 0xFFFF);
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static __inline__ __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>.  This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22	1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45	2
+
+#define ETHTOOL_FWVERS_LEN	32
+#define ETHTOOL_BUSINFO_LEN	32
+#define ETHTOOL_EROMVERS_LEN	32
+
+/**
+ * struct ethtool_drvinfo - general driver and device information
+ * @cmd: Command number = %ETHTOOL_GDRVINFO
+ * @driver: Driver short name.  This should normally match the name
+ *	in its bus driver structure (e.g. pci_driver::name).  Must
+ *	not be an empty string.
+ * @version: Driver version string; may be an empty string
+ * @fw_version: Firmware version string; driver defined; may be an
+ *	empty string
+ * @erom_version: Expansion ROM version string; driver defined; may be
+ *	an empty string
+ * @bus_info: Device bus address.  This should match the dev_name()
+ *	string for the underlying bus device, if there is one.  May be
+ *	an empty string.
+ * @reserved2: Reserved for future use; see the note on reserved space.
+ * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
+ *	%ETHTOOL_SPFLAGS commands; also the number of strings in the
+ *	%ETH_SS_PRIV_FLAGS set
+ * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS
+ *	command; also the number of strings in the %ETH_SS_STATS set
+ * @testinfo_len: Number of results returned by the %ETHTOOL_TEST
+ *	command; also the number of strings in the %ETH_SS_TEST set
+ * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM
+ *	and %ETHTOOL_SEEPROM commands, in bytes
+ * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS
+ *	command, in bytes
+ *
+ * Users can use the %ETHTOOL_GSSET_INFO command to get the number of
+ * strings in any string set (from Linux 2.6.34).
+ */
+struct ethtool_drvinfo {
+	__u32	cmd;
+	char	driver[32];
+	char	version[32];
+	char	fw_version[ETHTOOL_FWVERS_LEN];
+	char	bus_info[ETHTOOL_BUSINFO_LEN];
+	char	erom_version[ETHTOOL_EROMVERS_LEN];
+	char	reserved2[12];
+	__u32	n_priv_flags;
+	__u32	n_stats;
+	__u32	testinfo_len;
+	__u32	eedump_len;
+	__u32	regdump_len;
+};
+
+#define SOPASS_MAX	6
+
+/**
+ * struct ethtool_wolinfo - Wake-On-Lan configuration
+ * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL
+ * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes.
+ *	Read-only.
+ * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
+ * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE
+ *	is set in @wolopts.
+ */
+struct ethtool_wolinfo {
+	__u32	cmd;
+	__u32	supported;
+	__u32	wolopts;
+	__u8	sopass[SOPASS_MAX];
+};
+
+/* for passing single values */
+struct ethtool_value {
+	__u32	cmd;
+	__u32	data;
+};
+
+#define PFC_STORM_PREVENTION_AUTO	0xffff
+#define PFC_STORM_PREVENTION_DISABLE	0
+
+enum tunable_id {
+	ETHTOOL_ID_UNSPEC,
+	ETHTOOL_RX_COPYBREAK,
+	ETHTOOL_TX_COPYBREAK,
+	ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */
+	ETHTOOL_TX_COPYBREAK_BUF_SIZE,
+	/*
+	 * Add your fresh new tunable attribute above and remember to update
+	 * tunable_strings[] in net/ethtool/common.c
+	 */
+	__ETHTOOL_TUNABLE_COUNT,
+};
+
+enum tunable_type_id {
+	ETHTOOL_TUNABLE_UNSPEC,
+	ETHTOOL_TUNABLE_U8,
+	ETHTOOL_TUNABLE_U16,
+	ETHTOOL_TUNABLE_U32,
+	ETHTOOL_TUNABLE_U64,
+	ETHTOOL_TUNABLE_STRING,
+	ETHTOOL_TUNABLE_S8,
+	ETHTOOL_TUNABLE_S16,
+	ETHTOOL_TUNABLE_S32,
+	ETHTOOL_TUNABLE_S64,
+};
+
+struct ethtool_tunable {
+	__u32	cmd;
+	__u32	id;
+	__u32	type_id;
+	__u32	len;
+	void	*data[];
+};
+
+#define DOWNSHIFT_DEV_DEFAULT_COUNT	0xff
+#define DOWNSHIFT_DEV_DISABLE		0
+
+/* Time in msecs after which link is reported as down
+ * 0 = lowest time supported by the PHY
+ * 0xff = off, link down detection according to standard
+ */
+#define ETHTOOL_PHY_FAST_LINK_DOWN_ON	0
+#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF	0xff
+
+/* Energy Detect Power Down (EDPD) is a feature supported by some PHYs, where
+ * the PHY's RX & TX blocks are put into a low-power mode when there is no
+ * link detected (typically cable is un-plugged). For RX, only a minimal
+ * link-detection is available, and for TX the PHY wakes up to send link pulses
+ * to avoid any lock-ups in case the peer PHY may also be running in EDPD mode.
+ *
+ * Some PHYs may support configuration of the wake-up interval for TX pulses,
+ * and some PHYs may support only disabling TX pulses entirely. For the latter
+ * a special value is required (ETHTOOL_PHY_EDPD_NO_TX) so that this can be
+ * configured from userspace (should the user want it).
+ *
+ * The interval units for TX wake-up are in milliseconds, since this should
+ * cover a reasonable range of intervals:
+ *  - from 1 millisecond, which does not sound like much of a power-saver
+ *  - to ~65 seconds which is quite a lot to wait for a link to come up when
+ *    plugging a cable
+ */
+#define ETHTOOL_PHY_EDPD_DFLT_TX_MSECS		0xffff
+#define ETHTOOL_PHY_EDPD_NO_TX			0xfffe
+#define ETHTOOL_PHY_EDPD_DISABLE		0
+
+enum phy_tunable_id {
+	ETHTOOL_PHY_ID_UNSPEC,
+	ETHTOOL_PHY_DOWNSHIFT,
+	ETHTOOL_PHY_FAST_LINK_DOWN,
+	ETHTOOL_PHY_EDPD,
+	/*
+	 * Add your fresh new phy tunable attribute above and remember to update
+	 * phy_tunable_strings[] in net/ethtool/common.c
+	 */
+	__ETHTOOL_PHY_TUNABLE_COUNT,
+};
+
+/**
+ * struct ethtool_regs - hardware register dump
+ * @cmd: Command number = %ETHTOOL_GREGS
+ * @version: Dump format version.  This is driver-specific and may
+ *	distinguish different chips/revisions.  Drivers must use new
+ *	version numbers whenever the dump format changes in an
+ *	incompatible way.
+ * @len: On entry, the real length of @data.  On return, the number of
+ *	bytes used.
+ * @data: Buffer for the register dump
+ *
+ * Users should use %ETHTOOL_GDRVINFO to find the maximum length of
+ * a register dump for the interface.  They must allocate the buffer
+ * immediately following this structure.
+ */
+struct ethtool_regs {
+	__u32	cmd;
+	__u32	version;
+	__u32	len;
+	__u8	data[];
+};
+
+/**
+ * struct ethtool_eeprom - EEPROM dump
+ * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or
+ *	%ETHTOOL_SEEPROM
+ * @magic: A 'magic cookie' value to guard against accidental changes.
+ *	The value passed in to %ETHTOOL_SEEPROM must match the value
+ *	returned by %ETHTOOL_GEEPROM for the same device.  This is
+ *	unused when @cmd is %ETHTOOL_GMODULEEEPROM.
+ * @offset: Offset within the EEPROM to begin reading/writing, in bytes
+ * @len: On entry, number of bytes to read/write.  On successful
+ *	return, number of bytes actually read/written.  In case of
+ *	error, this may indicate at what point the error occurred.
+ * @data: Buffer to read/write from
+ *
+ * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find
+ * the length of an on-board or module EEPROM, respectively.  They
+ * must allocate the buffer immediately following this structure.
+ */
+struct ethtool_eeprom {
+	__u32	cmd;
+	__u32	magic;
+	__u32	offset;
+	__u32	len;
+	__u8	data[];
+};
+
+/**
+ * struct ethtool_eee - Energy Efficient Ethernet information
+ * @cmd: ETHTOOL_{G,S}EEE
+ * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
+ *	for which there is EEE support.
+ * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
+ *	advertised as eee capable.
+ * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
+ *	combinations advertised by the link partner as eee capable.
+ * @eee_active: Result of the eee auto negotiation.
+ * @eee_enabled: EEE configured mode (enabled/disabled).
+ * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
+ *	that eee was negotiated.
+ * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
+ *	its tx lpi (after reaching 'idle' state). Effective only when eee
+ *	was negotiated and tx_lpi_enabled was set.
+ * @reserved: Reserved for future use; see the note on reserved space.
+ */
+struct ethtool_eee {
+	__u32	cmd;
+	__u32	supported;
+	__u32	advertised;
+	__u32	lp_advertised;
+	__u32	eee_active;
+	__u32	eee_enabled;
+	__u32	tx_lpi_enabled;
+	__u32	tx_lpi_timer;
+	__u32	reserved[2];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ * @reserved: Reserved for future use; see the note on reserved space.
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+	__u32   cmd;
+	__u32   type;
+	__u32   eeprom_len;
+	__u32   reserved[8];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ *	a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ *	before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ *	a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ *	before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ *	statistics block updates.  Some drivers do not have an
+ *	in-memory statistic block, and in such cases this value is
+ *	ignored.  This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ *	a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ *	a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ *	sampling, measured in seconds.  Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies that interrupts
+ * should be coalesced until
+ *	(usecs > 0 && time_since_first_completion >= usecs) ||
+ *	(max_frames > 0 && completed_frames >= max_frames)
+ *
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated.  To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition time_since_first_completion >= usecs
+ *
+ * This is deprecated.  Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates.  Some drivers only implement
+ * one of RX or TX adaptive coalescing.  Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+	__u32	cmd;
+	__u32	rx_coalesce_usecs;
+	__u32	rx_max_coalesced_frames;
+	__u32	rx_coalesce_usecs_irq;
+	__u32	rx_max_coalesced_frames_irq;
+	__u32	tx_coalesce_usecs;
+	__u32	tx_max_coalesced_frames;
+	__u32	tx_coalesce_usecs_irq;
+	__u32	tx_max_coalesced_frames_irq;
+	__u32	stats_block_coalesce_usecs;
+	__u32	use_adaptive_rx_coalesce;
+	__u32	use_adaptive_tx_coalesce;
+	__u32	pkt_rate_low;
+	__u32	rx_coalesce_usecs_low;
+	__u32	rx_max_coalesced_frames_low;
+	__u32	tx_coalesce_usecs_low;
+	__u32	tx_max_coalesced_frames_low;
+	__u32	pkt_rate_high;
+	__u32	rx_coalesce_usecs_high;
+	__u32	rx_max_coalesced_frames_high;
+	__u32	tx_coalesce_usecs_high;
+	__u32	tx_max_coalesced_frames_high;
+	__u32	rate_sample_interval;
+};
+
+/**
+ * struct ethtool_ringparam - RX/TX ring parameters
+ * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM
+ * @rx_max_pending: Maximum supported number of pending entries per
+ *	RX ring.  Read-only.
+ * @rx_mini_max_pending: Maximum supported number of pending entries
+ *	per RX mini ring.  Read-only.
+ * @rx_jumbo_max_pending: Maximum supported number of pending entries
+ *	per RX jumbo ring.  Read-only.
+ * @tx_max_pending: Maximum supported number of pending entries per
+ *	TX ring.  Read-only.
+ * @rx_pending: Current maximum number of pending entries per RX ring
+ * @rx_mini_pending: Current maximum number of pending entries per RX
+ *	mini ring
+ * @rx_jumbo_pending: Current maximum number of pending entries per RX
+ *	jumbo ring
+ * @tx_pending: Current maximum supported number of pending entries
+ *	per TX ring
+ *
+ * If the interface does not have separate RX mini and/or jumbo rings,
+ * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0.
+ *
+ * There may also be driver-dependent minimum values for the number
+ * of entries per ring.
+ */
+struct ethtool_ringparam {
+	__u32	cmd;
+	__u32	rx_max_pending;
+	__u32	rx_mini_max_pending;
+	__u32	rx_jumbo_max_pending;
+	__u32	tx_max_pending;
+	__u32	rx_pending;
+	__u32	rx_mini_pending;
+	__u32	rx_jumbo_pending;
+	__u32	tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ *	support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+	__u32	cmd;
+	__u32	max_rx;
+	__u32	max_tx;
+	__u32	max_other;
+	__u32	max_combined;
+	__u32	rx_count;
+	__u32	tx_count;
+	__u32	other_count;
+	__u32	combined_count;
+};
+
+/**
+ * struct ethtool_pauseparam - Ethernet pause (flow control) parameters
+ * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM
+ * @autoneg: Flag to enable autonegotiation of pause frame use
+ * @rx_pause: Flag to enable reception of pause frames
+ * @tx_pause: Flag to enable transmission of pause frames
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ * If the link is autonegotiated, drivers should use
+ * mii_advertise_flowctrl() or similar code to set the advertised
+ * pause frame capabilities based on the @rx_pause and @tx_pause flags,
+ * even if @autoneg is zero.  They should also allow the advertised
+ * pause frame capabilities to be controlled directly through the
+ * advertising field of &struct ethtool_cmd.
+ *
+ * If @autoneg is non-zero, the MAC is configured to send and/or
+ * receive pause frames according to the result of autonegotiation.
+ * Otherwise, it is configured directly based on the @rx_pause and
+ * @tx_pause flags.
+ */
+struct ethtool_pauseparam {
+	__u32	cmd;
+	__u32	autoneg;
+	__u32	rx_pause;
+	__u32	tx_pause;
+};
+
+/* Link extended state */
+enum ethtool_link_ext_state {
+	ETHTOOL_LINK_EXT_STATE_AUTONEG,
+	ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE,
+	ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH,
+	ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY,
+	ETHTOOL_LINK_EXT_STATE_NO_CABLE,
+	ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE,
+	ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE,
+	ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE,
+	ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED,
+	ETHTOOL_LINK_EXT_STATE_OVERHEAT,
+	ETHTOOL_LINK_EXT_STATE_MODULE,
+};
+
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */
+enum ethtool_link_ext_substate_autoneg {
+	ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED = 1,
+	ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED,
+	ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED,
+	ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE,
+	ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE,
+	ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD,
+};
+
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE.
+ */
+enum ethtool_link_ext_substate_link_training {
+	ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED = 1,
+	ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT,
+	ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY,
+	ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT,
+};
+
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH.
+ */
+enum ethtool_link_ext_substate_link_logical_mismatch {
+	ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK = 1,
+	ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK,
+	ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS,
+	ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED,
+	ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED,
+};
+
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY.
+ */
+enum ethtool_link_ext_substate_bad_signal_integrity {
+	ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1,
+	ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE,
+	ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST,
+	ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS,
+};
+
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */
+enum ethtool_link_ext_substate_cable_issue {
+	ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE = 1,
+	ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE,
+};
+
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */
+enum ethtool_link_ext_substate_module {
+	ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1,
+};
+
+#define ETH_GSTRING_LEN		32
+
+/**
+ * enum ethtool_stringset - string set ID
+ * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST
+ * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS
+ * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with
+ *	%ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS
+ * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE;
+ *	now deprecated
+ * @ETH_SS_FEATURES: Device feature names
+ * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names
+ * @ETH_SS_TUNABLES: tunable names
+ * @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS
+ * @ETH_SS_PHY_TUNABLES: PHY tunable names
+ * @ETH_SS_LINK_MODES: link mode names
+ * @ETH_SS_MSG_CLASSES: debug message class names
+ * @ETH_SS_WOL_MODES: wake-on-lan modes
+ * @ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags
+ * @ETH_SS_TS_TX_TYPES: timestamping Tx types
+ * @ETH_SS_TS_RX_FILTERS: timestamping Rx filters
+ * @ETH_SS_UDP_TUNNEL_TYPES: UDP tunnel types
+ * @ETH_SS_STATS_STD: standardized stats
+ * @ETH_SS_STATS_ETH_PHY: names of IEEE 802.3 PHY statistics
+ * @ETH_SS_STATS_ETH_MAC: names of IEEE 802.3 MAC statistics
+ * @ETH_SS_STATS_ETH_CTRL: names of IEEE 802.3 MAC Control statistics
+ * @ETH_SS_STATS_RMON: names of RMON statistics
+ *
+ * @ETH_SS_COUNT: number of defined string sets
+ */
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
+	ETH_SS_NTUPLE_FILTERS,
+	ETH_SS_FEATURES,
+	ETH_SS_RSS_HASH_FUNCS,
+	ETH_SS_TUNABLES,
+	ETH_SS_PHY_STATS,
+	ETH_SS_PHY_TUNABLES,
+	ETH_SS_LINK_MODES,
+	ETH_SS_MSG_CLASSES,
+	ETH_SS_WOL_MODES,
+	ETH_SS_SOF_TIMESTAMPING,
+	ETH_SS_TS_TX_TYPES,
+	ETH_SS_TS_RX_FILTERS,
+	ETH_SS_UDP_TUNNEL_TYPES,
+	ETH_SS_STATS_STD,
+	ETH_SS_STATS_ETH_PHY,
+	ETH_SS_STATS_ETH_MAC,
+	ETH_SS_STATS_ETH_CTRL,
+	ETH_SS_STATS_RMON,
+
+	/* add new constants above here */
+	ETH_SS_COUNT
+};
+
+/**
+ * enum ethtool_mac_stats_src - source of ethtool MAC statistics
+ * @ETHTOOL_MAC_STATS_SRC_AGGREGATE:
+ *	if device supports a MAC merge layer, this retrieves the aggregate
+ *	statistics of the eMAC and pMAC. Otherwise, it retrieves just the
+ *	statistics of the single (express) MAC.
+ * @ETHTOOL_MAC_STATS_SRC_EMAC:
+ *	if device supports a MM layer, this retrieves the eMAC statistics.
+ *	Otherwise, it retrieves the statistics of the single (express) MAC.
+ * @ETHTOOL_MAC_STATS_SRC_PMAC:
+ *	if device supports a MM layer, this retrieves the pMAC statistics.
+ */
+enum ethtool_mac_stats_src {
+	ETHTOOL_MAC_STATS_SRC_AGGREGATE,
+	ETHTOOL_MAC_STATS_SRC_EMAC,
+	ETHTOOL_MAC_STATS_SRC_PMAC,
+};
+
+/**
+ * enum ethtool_module_power_mode_policy - plug-in module power mode policy
+ * @ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode.
+ * @ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host
+ *	to high power mode when the first port using it is put administratively
+ *	up and to low power mode when the last port using it is put
+ *	administratively down.
+ */
+enum ethtool_module_power_mode_policy {
+	ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH = 1,
+	ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO,
+};
+
+/**
+ * enum ethtool_module_power_mode - plug-in module power mode
+ * @ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode.
+ * @ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode.
+ */
+enum ethtool_module_power_mode {
+	ETHTOOL_MODULE_POWER_MODE_LOW = 1,
+	ETHTOOL_MODULE_POWER_MODE_HIGH,
+};
+
+/**
+ * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE
+ *	functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are
+ * 	unknown
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: PoDL PSE functions are disabled
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: PoDL PSE functions are enabled
+ */
+enum ethtool_podl_pse_admin_state {
+	ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN = 1,
+	ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
+	ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED,
+};
+
+/**
+ * enum ethtool_podl_pse_pw_d_status - power detection status of the PoDL PSE.
+ *	IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus:
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN: PoDL PSE
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED: "The enumeration “disabled” is
+ *	asserted true when the PoDL PSE state diagram variable mr_pse_enable is
+ *	false"
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING: "The enumeration “searching” is
+ *	asserted true when either of the PSE state diagram variables
+ *	pi_detecting or pi_classifying is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING: "The enumeration “deliveringPower”
+ *	is asserted true when the PoDL PSE state diagram variable pi_powered is
+ *	true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP: "The enumeration “sleep” is asserted
+ *	true when the PoDL PSE state diagram variable pi_sleeping is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE: "The enumeration “idle” is asserted true
+ *	when the logical combination of the PoDL PSE state diagram variables
+ *	pi_prebiased*!pi_sleeping is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR: "The enumeration “error” is asserted
+ *	true when the PoDL PSE state diagram variable overload_held is true."
+ */
+enum ethtool_podl_pse_pw_d_status {
+	ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN = 1,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR,
+};
+
+/**
+ * enum ethtool_mm_verify_status - status of MAC Merge Verify function
+ * @ETHTOOL_MM_VERIFY_STATUS_UNKNOWN:
+ *	verification status is unknown
+ * @ETHTOOL_MM_VERIFY_STATUS_INITIAL:
+ *	the 802.3 Verify State diagram is in the state INIT_VERIFICATION
+ * @ETHTOOL_MM_VERIFY_STATUS_VERIFYING:
+ *	the Verify State diagram is in the state VERIFICATION_IDLE,
+ *	SEND_VERIFY or WAIT_FOR_RESPONSE
+ * @ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED:
+ *	indicates that the Verify State diagram is in the state VERIFIED
+ * @ETHTOOL_MM_VERIFY_STATUS_FAILED:
+ *	the Verify State diagram is in the state VERIFY_FAIL
+ * @ETHTOOL_MM_VERIFY_STATUS_DISABLED:
+ *	verification of preemption operation is disabled
+ */
+enum ethtool_mm_verify_status {
+	ETHTOOL_MM_VERIFY_STATUS_UNKNOWN,
+	ETHTOOL_MM_VERIFY_STATUS_INITIAL,
+	ETHTOOL_MM_VERIFY_STATUS_VERIFYING,
+	ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED,
+	ETHTOOL_MM_VERIFY_STATUS_FAILED,
+	ETHTOOL_MM_VERIFY_STATUS_DISABLED,
+};
+
+/**
+ * struct ethtool_gstrings - string set for data tagging
+ * @cmd: Command number = %ETHTOOL_GSTRINGS
+ * @string_set: String set ID; one of &enum ethtool_stringset
+ * @len: On return, the number of strings in the string set
+ * @data: Buffer for strings.  Each string is null-padded to a size of
+ *	%ETH_GSTRING_LEN.
+ *
+ * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in
+ * the string set.  They must allocate a buffer of the appropriate
+ * size immediately following this structure.
+ */
+struct ethtool_gstrings {
+	__u32	cmd;
+	__u32	string_set;
+	__u32	len;
+	__u8	data[];
+};
+
+/**
+ * struct ethtool_sset_info - string set information
+ * @cmd: Command number = %ETHTOOL_GSSET_INFO
+ * @reserved: Reserved for future use; see the note on reserved space.
+ * @sset_mask: On entry, a bitmask of string sets to query, with bits
+ *	numbered according to &enum ethtool_stringset.  On return, a
+ *	bitmask of those string sets queried that are supported.
+ * @data: Buffer for string set sizes.  On return, this contains the
+ *	size of each string set that was queried and supported, in
+ *	order of ID.
+ *
+ * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on
+ * return @sset_mask == 0x6 (sets 1, 2).  Then @data[0] contains the
+ * size of set 1 and @data[1] contains the size of set 2.
+ *
+ * Users must allocate a buffer of the appropriate size (4 * number of
+ * sets queried) immediately following this structure.
+ */
+struct ethtool_sset_info {
+	__u32	cmd;
+	__u32	reserved;
+	__u64	sset_mask;
+	__u32	data[];
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ *	only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ *	test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),
+	ETH_TEST_FL_FAILED	= (1 << 1),
+	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
+	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
+};
+
+/**
+ * struct ethtool_test - device self-test invocation
+ * @cmd: Command number = %ETHTOOL_TEST
+ * @flags: A bitmask of flags from &enum ethtool_test_flags.  Some
+ *	flags may be set by the user on entry; others may be set by
+ *	the driver on return.
+ * @reserved: Reserved for future use; see the note on reserved space.
+ * @len: On return, the number of test results
+ * @data: Array of test results
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of test results that will be returned.  They must allocate a
+ * buffer of the appropriate size (8 * number of results) immediately
+ * following this structure.
+ */
+struct ethtool_test {
+	__u32	cmd;
+	__u32	flags;
+	__u32	reserved;
+	__u32	len;
+	__u64	data[];
+};
+
+/**
+ * struct ethtool_stats - device-specific statistics
+ * @cmd: Command number = %ETHTOOL_GSTATS
+ * @n_stats: On return, the number of statistics
+ * @data: Array of statistics
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of statistics that will be returned.  They must allocate a
+ * buffer of the appropriate size (8 * number of statistics)
+ * immediately following this structure.
+ */
+struct ethtool_stats {
+	__u32	cmd;
+	__u32	n_stats;
+	__u64	data[];
+};
+
+/**
+ * struct ethtool_perm_addr - permanent hardware address
+ * @cmd: Command number = %ETHTOOL_GPERMADDR
+ * @size: On entry, the size of the buffer.  On return, the size of the
+ *	address.  The command fails if the buffer is too small.
+ * @data: Buffer for the address
+ *
+ * Users must allocate the buffer immediately following this structure.
+ * A buffer size of %MAX_ADDR_LEN should be sufficient for any address
+ * type.
+ */
+struct ethtool_perm_addr {
+	__u32	cmd;
+	__u32	size;
+	__u8	data[];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
+	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
+	ETH_FLAG_RXHASH		= (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	spi;
+	__u8    tos;
+};
+
+#define	ETH_RX_NFC_IP4	1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	l4_4_bytes;
+	__u8    tos;
+	__u8    ip_ver;
+	__u8    proto;
+};
+
+/**
+ * struct ethtool_tcpip6_spec - flow specification for TCP/IPv6 etc.
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tclass: Traffic Class
+ *
+ * This can be used to specify a TCP/IPv6, UDP/IPv6 or SCTP/IPv6 flow.
+ */
+struct ethtool_tcpip6_spec {
+	__be32	ip6src[4];
+	__be32	ip6dst[4];
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tclass;
+};
+
+/**
+ * struct ethtool_ah_espip6_spec - flow specification for IPsec/IPv6
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @spi: Security parameters index
+ * @tclass: Traffic Class
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv6.
+ */
+struct ethtool_ah_espip6_spec {
+	__be32	ip6src[4];
+	__be32	ip6dst[4];
+	__be32	spi;
+	__u8    tclass;
+};
+
+/**
+ * struct ethtool_usrip6_spec - general flow specification for IPv6
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tclass: Traffic Class
+ * @l4_proto: Transport protocol number (nexthdr after any Extension Headers)
+ */
+struct ethtool_usrip6_spec {
+	__be32	ip6src[4];
+	__be32	ip6dst[4];
+	__be32	l4_4_bytes;
+	__u8    tclass;
+	__u8    l4_proto;
+};
+
+union ethtool_flow_union {
+	struct ethtool_tcpip4_spec		tcp_ip4_spec;
+	struct ethtool_tcpip4_spec		udp_ip4_spec;
+	struct ethtool_tcpip4_spec		sctp_ip4_spec;
+	struct ethtool_ah_espip4_spec		ah_ip4_spec;
+	struct ethtool_ah_espip4_spec		esp_ip4_spec;
+	struct ethtool_usrip4_spec		usr_ip4_spec;
+	struct ethtool_tcpip6_spec		tcp_ip6_spec;
+	struct ethtool_tcpip6_spec		udp_ip6_spec;
+	struct ethtool_tcpip6_spec		sctp_ip6_spec;
+	struct ethtool_ah_espip6_spec		ah_ip6_spec;
+	struct ethtool_ah_espip6_spec		esp_ip6_spec;
+	struct ethtool_usrip6_spec		usr_ip6_spec;
+	struct ethhdr				ether_spec;
+	__u8					hdata[52];
+};
+
+/**
+ * struct ethtool_flow_ext - additional RX flow fields
+ * @h_dest: destination MAC address
+ * @vlan_etype: VLAN EtherType
+ * @vlan_tci: VLAN tag control information
+ * @data: user defined data
+ * @padding: Reserved for future use; see the note on reserved space.
+ *
+ * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT
+ * is set in &struct ethtool_rx_flow_spec @flow_type.
+ * @h_dest is valid if %FLOW_MAC_EXT is set.
+ */
+struct ethtool_flow_ext {
+	__u8		padding[2];
+	unsigned char	h_dest[ETH_ALEN];
+	__be16		vlan_etype;
+	__be16		vlan_tci;
+	__be32		data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ *	Note, all additional fields must be ignored unless @flow_type
+ *	includes the %FLOW_EXT or %FLOW_MAC_EXT flag
+ *	(see &struct ethtool_flow_ext description).
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ *	if packets should be discarded, or %RX_CLS_FLOW_WAKE if the
+ *	packets should be used for Wake-on-LAN with %WAKE_FILTER
+ * @location: Location of rule in the table.  Locations must be
+ *	numbered such that a flow matching multiple rules will be
+ *	classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+	__u32		flow_type;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
+	__u64		ring_cookie;
+	__u32		location;
+};
+
+/* How rings are laid out when accessing virtual functions or
+ * offloaded queues is device specific. To allow users to do flow
+ * steering and specify these queues the ring cookie is partitioned
+ * into a 32bit queue index with an 8 bit virtual function id.
+ * This also leaves the 3bytes for further specifiers. It is possible
+ * future devices may support more than 256 virtual functions if
+ * devices start supporting PCIe w/ARI. However at the moment I
+ * do not know of any devices that support this so I do not reserve
+ * space for this at this time. If a future patch consumes the next
+ * byte it should be aware of this possibility.
+ */
+#define ETHTOOL_RX_FLOW_SPEC_RING	0x00000000FFFFFFFFLL
+#define ETHTOOL_RX_FLOW_SPEC_RING_VF	0x000000FF00000000LL
+#define ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF 32
+static __inline__ __u64 ethtool_get_flow_spec_ring(__u64 ring_cookie)
+{
+	return ETHTOOL_RX_FLOW_SPEC_RING & ring_cookie;
+}
+
+static __inline__ __u64 ethtool_get_flow_spec_ring_vf(__u64 ring_cookie)
+{
+	return (ETHTOOL_RX_FLOW_SPEC_RING_VF & ring_cookie) >>
+				ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
+}
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rss_context: RSS context to be affected
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
+ * structure fields must not be used, except that if @flow_type includes
+ * the %FLOW_RSS flag, then @rss_context determines which RSS context to
+ * act on.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return.  If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values.  If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return; if
+ * @fs.@flow_type includes the %FLOW_RSS flag, then @rss_context is
+ * filled with the RSS context ID associated with the rule.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry.  On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules.  Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
+ * @fs.@location is the actual rule location.  If @fs.@flow_type
+ * includes the %FLOW_RSS flag, @rss_context is the RSS context ID to
+ * use for flow spreading traffic which matches this rule.  The value
+ * from the rxfh indirection table will be added to @fs.@ring_cookie
+ * to choose which ring to deliver to.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows.  The special
+ * values are %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority).  Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+	__u32				cmd;
+	__u32				flow_type;
+	__u64				data;
+	struct ethtool_rx_flow_spec	fs;
+	union {
+		__u32			rule_cnt;
+		__u32			rss_context;
+	};
+	__u32				rule_locs[];
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ *	indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values.  This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+	__u32	cmd;
+	__u32	size;
+	__u32	ring_index[];
+};
+
+/**
+ * struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key.
+ * @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH
+ * @rss_context: RSS context identifier.  Context 0 is the default for normal
+ *	traffic; other contexts can be referenced as the destination for RX flow
+ *	classification rules.  %ETH_RXFH_CONTEXT_ALLOC is used with command
+ *	%ETHTOOL_SRSSH to allocate a new RSS context; on return this field will
+ *	contain the ID of the newly allocated context.
+ * @indir_size: On entry, the array size of the user buffer for the
+ *	indirection table, which may be zero, or (for %ETHTOOL_SRSSH),
+ *	%ETH_RXFH_INDIR_NO_CHANGE.  On return from %ETHTOOL_GRSSH,
+ *	the array size of the hardware indirection table.
+ * @key_size: On entry, the array size of the user buffer for the hash key,
+ *	which may be zero.  On return from %ETHTOOL_GRSSH, the size of the
+ *	hardware hash key.
+ * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
+ *	Valid values are one of the %ETH_RSS_HASH_*.
+ * @rsvd8: Reserved for future use; see the note on reserved space.
+ * @rsvd32: Reserved for future use; see the note on reserved space.
+ * @rss_config: RX ring/queue index for each hash value i.e., indirection table
+ *	of @indir_size __u32 elements, followed by hash key of @key_size
+ *	bytes.
+ *
+ * For %ETHTOOL_GRSSH, a @indir_size and key_size of zero means that only the
+ * size should be returned.  For %ETHTOOL_SRSSH, an @indir_size of
+ * %ETH_RXFH_INDIR_NO_CHANGE means that indir table setting is not requested
+ * and a @indir_size of zero means the indir table should be reset to default
+ * values (if @rss_context == 0) or that the RSS context should be deleted.
+ * An hfunc of zero means that hash function setting is not requested.
+ */
+struct ethtool_rxfh {
+	__u32   cmd;
+	__u32	rss_context;
+	__u32   indir_size;
+	__u32   key_size;
+	__u8	hfunc;
+	__u8	rsvd8[3];
+	__u32	rsvd32;
+	__u32   rss_config[];
+};
+#define ETH_RXFH_CONTEXT_ALLOC		0xffffffff
+#define ETH_RXFH_INDIR_NO_CHANGE	0xffffffff
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+	__u32		 flow_type;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		struct ethhdr				ether_spec;
+		__u8					hdata[72];
+	} h_u, m_u;
+
+	__u16	        vlan_tag;
+	__u16	        vlan_tag_mask;
+	__u64		data;
+	__u64		data_mask;
+
+	__s32		action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+	__u32					cmd;
+	struct ethtool_rx_ntuple_flow_spec	fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME	128
+enum ethtool_flash_op_type {
+	ETHTOOL_FLASH_ALL_REGIONS	= 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+	__u32	cmd;
+	__u32	region;
+	char	data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * 	%ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ *        get and filled in by ethtool for set operation.
+ *        flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
+ *        firmware dump is disabled.
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * 	 for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+struct ethtool_dump {
+	__u32	cmd;
+	__u32	version;
+	__u32	flag;
+	__u32	len;
+	__u8	data[];
+};
+
+#define ETH_FW_DUMP_DISABLE 0
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+	__u32	available;
+	__u32	requested;
+	__u32	active;
+	__u32	never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: On entry, the number of elements in the features[] array;
+ *	on return, the number of elements in features[] needed to hold
+ *	all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_get_features_block features[];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+	__u32	valid;
+	__u32	requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_set_features_block features[];
+};
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @tx_reserved: Reserved for future use; see the note on reserved space.
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ * @rx_reserved: Reserved for future use; see the note on reserved space.
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ *
+ * Drivers should only report the filters they actually support without
+ * upscaling in the SIOCSHWTSTAMP ioctl. If the SIOCSHWSTAMP request for
+ * HWTSTAMP_FILTER_V1_SYNC is supported by HWTSTAMP_FILTER_V1_EVENT, then the
+ * driver should only report HWTSTAMP_FILTER_V1_EVENT in this op.
+ */
+struct ethtool_ts_info {
+	__u32	cmd;
+	__u32	so_timestamping;
+	__s32	phc_index;
+	__u32	tx_types;
+	__u32	tx_reserved[3];
+	__u32	rx_filters;
+	__u32	rx_reserved[3];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ *	those bits were ignored.
+ *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ *      resulting state of bits masked by .valid is not equal to .requested.
+ *      Probably there are other device-specific constraints on some features
+ *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ *      here as though ignored bits were cleared.
+ *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ *      compatibility functions. Requested offload state cannot be properly
+ *      managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+	ETHTOOL_F_UNSUPPORTED__BIT,
+	ETHTOOL_F_WISH__BIT,
+	ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
+
+#define MAX_NUM_QUEUE		4096
+
+/**
+ * struct ethtool_per_queue_op - apply sub command to the queues in mask.
+ * @cmd: ETHTOOL_PERQUEUE
+ * @sub_command: the sub command which apply to each queues
+ * @queue_mask: Bitmap of the queues which sub command apply to
+ * @data: A complete command structure following for each of the queues addressed
+ */
+struct ethtool_per_queue_op {
+	__u32	cmd;
+	__u32	sub_command;
+	__u32	queue_mask[__KERNEL_DIV_ROUND_UP(MAX_NUM_QUEUE, 32)];
+	char	data[];
+};
+
+/**
+ * struct ethtool_fecparam - Ethernet Forward Error Correction parameters
+ * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM
+ * @active_fec: FEC mode which is active on the port, single bit set, GET only.
+ * @fec: Bitmask of configured FEC modes.
+ * @reserved: Reserved for future extensions, ignore on GET, write 0 for SET.
+ *
+ * Note that @reserved was never validated on input and ethtool user space
+ * left it uninitialized when calling SET. Hence going forward it can only be
+ * used to return a value to userspace with GET.
+ *
+ * FEC modes supported by the device can be read via %ETHTOOL_GLINKSETTINGS.
+ * FEC settings are configured by link autonegotiation whenever it's enabled.
+ * With autoneg on %ETHTOOL_GFECPARAM can be used to read the current mode.
+ *
+ * When autoneg is disabled %ETHTOOL_SFECPARAM controls the FEC settings.
+ * It is recommended that drivers only accept a single bit set in @fec.
+ * When multiple bits are set in @fec drivers may pick mode in an implementation
+ * dependent way. Drivers should reject mixing %ETHTOOL_FEC_AUTO_BIT with other
+ * FEC modes, because it's unclear whether in this case other modes constrain
+ * AUTO or are independent choices.
+ * Drivers must reject SET requests if they support none of the requested modes.
+ *
+ * If device does not support FEC drivers may use %ETHTOOL_FEC_NONE instead
+ * of returning %EOPNOTSUPP from %ETHTOOL_GFECPARAM.
+ *
+ * See enum ethtool_fec_config_bits for definition of valid bits for both
+ * @fec and @active_fec.
+ */
+struct ethtool_fecparam {
+	__u32   cmd;
+	/* bitmask of FEC modes */
+	__u32   active_fec;
+	__u32   fec;
+	__u32   reserved;
+};
+
+/**
+ * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration
+ * @ETHTOOL_FEC_NONE_BIT: FEC mode configuration is not supported. Should not
+ *			be used together with other bits. GET only.
+ * @ETHTOOL_FEC_AUTO_BIT: Select default/best FEC mode automatically, usually
+ *			based link mode and SFP parameters read from module's
+ *			EEPROM. This bit does _not_ mean autonegotiation.
+ * @ETHTOOL_FEC_OFF_BIT: No FEC Mode
+ * @ETHTOOL_FEC_RS_BIT: Reed-Solomon FEC Mode
+ * @ETHTOOL_FEC_BASER_BIT: Base-R/Reed-Solomon FEC Mode
+ * @ETHTOOL_FEC_LLRS_BIT: Low Latency Reed Solomon FEC Mode (25G/50G Ethernet
+ *			Consortium)
+ */
+enum ethtool_fec_config_bits {
+	ETHTOOL_FEC_NONE_BIT,
+	ETHTOOL_FEC_AUTO_BIT,
+	ETHTOOL_FEC_OFF_BIT,
+	ETHTOOL_FEC_RS_BIT,
+	ETHTOOL_FEC_BASER_BIT,
+	ETHTOOL_FEC_LLRS_BIT,
+};
+
+#define ETHTOOL_FEC_NONE		(1 << ETHTOOL_FEC_NONE_BIT)
+#define ETHTOOL_FEC_AUTO		(1 << ETHTOOL_FEC_AUTO_BIT)
+#define ETHTOOL_FEC_OFF			(1 << ETHTOOL_FEC_OFF_BIT)
+#define ETHTOOL_FEC_RS			(1 << ETHTOOL_FEC_RS_BIT)
+#define ETHTOOL_FEC_BASER		(1 << ETHTOOL_FEC_BASER_BIT)
+#define ETHTOOL_FEC_LLRS		(1 << ETHTOOL_FEC_LLRS_BIT)
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* DEPRECATED, Get settings.
+					    * Please use ETHTOOL_GLINKSETTINGS
+					    */
+#define ETHTOOL_SSET		0x00000002 /* DEPRECATED, Set settings.
+					    * Please use ETHTOOL_SLINKSETTINGS
+					    */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK		0x0000000a
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO	0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM	0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE		0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE		0x00000045 /* Set EEE settings */
+
+#define ETHTOOL_GRSSH		0x00000046 /* Get RX flow hash configuration */
+#define ETHTOOL_SRSSH		0x00000047 /* Set RX flow hash configuration */
+#define ETHTOOL_GTUNABLE	0x00000048 /* Get tunable configuration */
+#define ETHTOOL_STUNABLE	0x00000049 /* Set tunable configuration */
+#define ETHTOOL_GPHYSTATS	0x0000004a /* get PHY-specific statistics */
+
+#define ETHTOOL_PERQUEUE	0x0000004b /* Set per queue options */
+
+#define ETHTOOL_GLINKSETTINGS	0x0000004c /* Get ethtool_link_settings */
+#define ETHTOOL_SLINKSETTINGS	0x0000004d /* Set ethtool_link_settings */
+#define ETHTOOL_PHY_GTUNABLE	0x0000004e /* Get PHY tunable configuration */
+#define ETHTOOL_PHY_STUNABLE	0x0000004f /* Set PHY tunable configuration */
+#define ETHTOOL_GFECPARAM	0x00000050 /* Get FEC settings */
+#define ETHTOOL_SFECPARAM	0x00000051 /* Set FEC settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Link mode bit indices */
+enum ethtool_link_mode_bit_indices {
+	ETHTOOL_LINK_MODE_10baseT_Half_BIT	= 0,
+	ETHTOOL_LINK_MODE_10baseT_Full_BIT	= 1,
+	ETHTOOL_LINK_MODE_100baseT_Half_BIT	= 2,
+	ETHTOOL_LINK_MODE_100baseT_Full_BIT	= 3,
+	ETHTOOL_LINK_MODE_1000baseT_Half_BIT	= 4,
+	ETHTOOL_LINK_MODE_1000baseT_Full_BIT	= 5,
+	ETHTOOL_LINK_MODE_Autoneg_BIT		= 6,
+	ETHTOOL_LINK_MODE_TP_BIT		= 7,
+	ETHTOOL_LINK_MODE_AUI_BIT		= 8,
+	ETHTOOL_LINK_MODE_MII_BIT		= 9,
+	ETHTOOL_LINK_MODE_FIBRE_BIT		= 10,
+	ETHTOOL_LINK_MODE_BNC_BIT		= 11,
+	ETHTOOL_LINK_MODE_10000baseT_Full_BIT	= 12,
+	ETHTOOL_LINK_MODE_Pause_BIT		= 13,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT	= 14,
+	ETHTOOL_LINK_MODE_2500baseX_Full_BIT	= 15,
+	ETHTOOL_LINK_MODE_Backplane_BIT		= 16,
+	ETHTOOL_LINK_MODE_1000baseKX_Full_BIT	= 17,
+	ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT	= 18,
+	ETHTOOL_LINK_MODE_10000baseKR_Full_BIT	= 19,
+	ETHTOOL_LINK_MODE_10000baseR_FEC_BIT	= 20,
+	ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT = 21,
+	ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT	= 22,
+	ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT	= 23,
+	ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT	= 24,
+	ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT	= 25,
+	ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT	= 26,
+	ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT	= 27,
+	ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT	= 28,
+	ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT	= 29,
+	ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT	= 30,
+	ETHTOOL_LINK_MODE_25000baseCR_Full_BIT	= 31,
+
+	/* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
+	 * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
+	 * macro for bits > 31. The only way to use indices > 31 is to
+	 * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
+	 */
+
+	ETHTOOL_LINK_MODE_25000baseKR_Full_BIT	= 32,
+	ETHTOOL_LINK_MODE_25000baseSR_Full_BIT	= 33,
+	ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT	= 34,
+	ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT	= 35,
+	ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT	= 36,
+	ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT	= 37,
+	ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT	= 38,
+	ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT	= 39,
+	ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT		= 40,
+	ETHTOOL_LINK_MODE_1000baseX_Full_BIT	= 41,
+	ETHTOOL_LINK_MODE_10000baseCR_Full_BIT	= 42,
+	ETHTOOL_LINK_MODE_10000baseSR_Full_BIT	= 43,
+	ETHTOOL_LINK_MODE_10000baseLR_Full_BIT	= 44,
+	ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT	= 45,
+	ETHTOOL_LINK_MODE_10000baseER_Full_BIT	= 46,
+	ETHTOOL_LINK_MODE_2500baseT_Full_BIT	= 47,
+	ETHTOOL_LINK_MODE_5000baseT_Full_BIT	= 48,
+
+	ETHTOOL_LINK_MODE_FEC_NONE_BIT	= 49,
+	ETHTOOL_LINK_MODE_FEC_RS_BIT	= 50,
+	ETHTOOL_LINK_MODE_FEC_BASER_BIT	= 51,
+	ETHTOOL_LINK_MODE_50000baseKR_Full_BIT		 = 52,
+	ETHTOOL_LINK_MODE_50000baseSR_Full_BIT		 = 53,
+	ETHTOOL_LINK_MODE_50000baseCR_Full_BIT		 = 54,
+	ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT	 = 55,
+	ETHTOOL_LINK_MODE_50000baseDR_Full_BIT		 = 56,
+	ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT	 = 57,
+	ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT	 = 58,
+	ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT	 = 59,
+	ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT = 60,
+	ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT	 = 61,
+	ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT	 = 62,
+	ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT	 = 63,
+	ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT = 64,
+	ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT	 = 65,
+	ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT	 = 66,
+	ETHTOOL_LINK_MODE_100baseT1_Full_BIT		 = 67,
+	ETHTOOL_LINK_MODE_1000baseT1_Full_BIT		 = 68,
+	ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT	 = 69,
+	ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT	 = 70,
+	ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT = 71,
+	ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT	 = 72,
+	ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT	 = 73,
+	ETHTOOL_LINK_MODE_FEC_LLRS_BIT			 = 74,
+	ETHTOOL_LINK_MODE_100000baseKR_Full_BIT		 = 75,
+	ETHTOOL_LINK_MODE_100000baseSR_Full_BIT		 = 76,
+	ETHTOOL_LINK_MODE_100000baseLR_ER_FR_Full_BIT	 = 77,
+	ETHTOOL_LINK_MODE_100000baseCR_Full_BIT		 = 78,
+	ETHTOOL_LINK_MODE_100000baseDR_Full_BIT		 = 79,
+	ETHTOOL_LINK_MODE_200000baseKR2_Full_BIT	 = 80,
+	ETHTOOL_LINK_MODE_200000baseSR2_Full_BIT	 = 81,
+	ETHTOOL_LINK_MODE_200000baseLR2_ER2_FR2_Full_BIT = 82,
+	ETHTOOL_LINK_MODE_200000baseDR2_Full_BIT	 = 83,
+	ETHTOOL_LINK_MODE_200000baseCR2_Full_BIT	 = 84,
+	ETHTOOL_LINK_MODE_400000baseKR4_Full_BIT	 = 85,
+	ETHTOOL_LINK_MODE_400000baseSR4_Full_BIT	 = 86,
+	ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT = 87,
+	ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT	 = 88,
+	ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT	 = 89,
+	ETHTOOL_LINK_MODE_100baseFX_Half_BIT		 = 90,
+	ETHTOOL_LINK_MODE_100baseFX_Full_BIT		 = 91,
+	ETHTOOL_LINK_MODE_10baseT1L_Full_BIT		 = 92,
+	ETHTOOL_LINK_MODE_800000baseCR8_Full_BIT	 = 93,
+	ETHTOOL_LINK_MODE_800000baseKR8_Full_BIT	 = 94,
+	ETHTOOL_LINK_MODE_800000baseDR8_Full_BIT	 = 95,
+	ETHTOOL_LINK_MODE_800000baseDR8_2_Full_BIT	 = 96,
+	ETHTOOL_LINK_MODE_800000baseSR8_Full_BIT	 = 97,
+	ETHTOOL_LINK_MODE_800000baseVR8_Full_BIT	 = 98,
+	ETHTOOL_LINK_MODE_10baseT1S_Full_BIT		 = 99,
+	ETHTOOL_LINK_MODE_10baseT1S_Half_BIT		 = 100,
+	ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT	 = 101,
+
+	/* must be last entry */
+	__ETHTOOL_LINK_MODE_MASK_NBITS
+};
+
+#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name)	\
+	(1UL << (ETHTOOL_LINK_MODE_ ## base_name ## _BIT))
+
+/* DEPRECATED macros. Please migrate to
+ * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT
+ * define any new SUPPORTED_* macro for bits > 31.
+ */
+#define SUPPORTED_10baseT_Half		__ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half)
+#define SUPPORTED_10baseT_Full		__ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full)
+#define SUPPORTED_100baseT_Half		__ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half)
+#define SUPPORTED_100baseT_Full		__ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full)
+#define SUPPORTED_1000baseT_Half	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half)
+#define SUPPORTED_1000baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full)
+#define SUPPORTED_Autoneg		__ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg)
+#define SUPPORTED_TP			__ETHTOOL_LINK_MODE_LEGACY_MASK(TP)
+#define SUPPORTED_AUI			__ETHTOOL_LINK_MODE_LEGACY_MASK(AUI)
+#define SUPPORTED_MII			__ETHTOOL_LINK_MODE_LEGACY_MASK(MII)
+#define SUPPORTED_FIBRE			__ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE)
+#define SUPPORTED_BNC			__ETHTOOL_LINK_MODE_LEGACY_MASK(BNC)
+#define SUPPORTED_10000baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full)
+#define SUPPORTED_Pause			__ETHTOOL_LINK_MODE_LEGACY_MASK(Pause)
+#define SUPPORTED_Asym_Pause		__ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause)
+#define SUPPORTED_2500baseX_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full)
+#define SUPPORTED_Backplane		__ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane)
+#define SUPPORTED_1000baseKX_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full)
+#define SUPPORTED_10000baseKX4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full)
+#define SUPPORTED_10000baseKR_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full)
+#define SUPPORTED_10000baseR_FEC	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC)
+#define SUPPORTED_20000baseMLD2_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full)
+#define SUPPORTED_20000baseKR2_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full)
+#define SUPPORTED_40000baseKR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full)
+#define SUPPORTED_40000baseCR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full)
+#define SUPPORTED_40000baseSR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full)
+#define SUPPORTED_40000baseLR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full)
+#define SUPPORTED_56000baseKR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full)
+#define SUPPORTED_56000baseCR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full)
+#define SUPPORTED_56000baseSR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full)
+#define SUPPORTED_56000baseLR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full)
+/* Please do not define any new SUPPORTED_* macro for bits > 31, see
+ * notice above.
+ */
+
+/*
+ * DEPRECATED macros. Please migrate to
+ * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT
+ * define any new ADERTISE_* macro for bits > 31.
+ */
+#define ADVERTISED_10baseT_Half		__ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half)
+#define ADVERTISED_10baseT_Full		__ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full)
+#define ADVERTISED_100baseT_Half	__ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half)
+#define ADVERTISED_100baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full)
+#define ADVERTISED_1000baseT_Half	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half)
+#define ADVERTISED_1000baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full)
+#define ADVERTISED_Autoneg		__ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg)
+#define ADVERTISED_TP			__ETHTOOL_LINK_MODE_LEGACY_MASK(TP)
+#define ADVERTISED_AUI			__ETHTOOL_LINK_MODE_LEGACY_MASK(AUI)
+#define ADVERTISED_MII			__ETHTOOL_LINK_MODE_LEGACY_MASK(MII)
+#define ADVERTISED_FIBRE		__ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE)
+#define ADVERTISED_BNC			__ETHTOOL_LINK_MODE_LEGACY_MASK(BNC)
+#define ADVERTISED_10000baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full)
+#define ADVERTISED_Pause		__ETHTOOL_LINK_MODE_LEGACY_MASK(Pause)
+#define ADVERTISED_Asym_Pause		__ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause)
+#define ADVERTISED_2500baseX_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full)
+#define ADVERTISED_Backplane		__ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane)
+#define ADVERTISED_1000baseKX_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full)
+#define ADVERTISED_10000baseKX4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full)
+#define ADVERTISED_10000baseKR_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full)
+#define ADVERTISED_10000baseR_FEC	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC)
+#define ADVERTISED_20000baseMLD2_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full)
+#define ADVERTISED_20000baseKR2_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full)
+#define ADVERTISED_40000baseKR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full)
+#define ADVERTISED_40000baseCR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full)
+#define ADVERTISED_40000baseSR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full)
+#define ADVERTISED_40000baseLR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full)
+#define ADVERTISED_56000baseKR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full)
+#define ADVERTISED_56000baseCR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full)
+#define ADVERTISED_56000baseSR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full)
+#define ADVERTISED_56000baseLR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full)
+/* Please do not define any new ADVERTISED_* macro for bits > 31, see
+ * notice above.
+ */
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal.
+ * Update drivers/net/phy/phy.c:phy_speed_to_str() and
+ * drivers/net/bonding/bond_3ad.c:__get_link_speed() when adding new values.
+ */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_2500		2500
+#define SPEED_5000		5000
+#define SPEED_10000		10000
+#define SPEED_14000		14000
+#define SPEED_20000		20000
+#define SPEED_25000		25000
+#define SPEED_40000		40000
+#define SPEED_50000		50000
+#define SPEED_56000		56000
+#define SPEED_100000		100000
+#define SPEED_200000		200000
+#define SPEED_400000		400000
+#define SPEED_800000		800000
+
+#define SPEED_UNKNOWN		-1
+
+static __inline__ int ethtool_validate_speed(__u32 speed)
+{
+	return speed <= INT_MAX || speed == (__u32)SPEED_UNKNOWN;
+}
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+#define DUPLEX_UNKNOWN		0xff
+
+static __inline__ int ethtool_validate_duplex(__u8 duplex)
+{
+	switch (duplex) {
+	case DUPLEX_HALF:
+	case DUPLEX_FULL:
+	case DUPLEX_UNKNOWN:
+		return 1;
+	}
+
+	return 0;
+}
+
+#define MASTER_SLAVE_CFG_UNSUPPORTED		0
+#define MASTER_SLAVE_CFG_UNKNOWN		1
+#define MASTER_SLAVE_CFG_MASTER_PREFERRED	2
+#define MASTER_SLAVE_CFG_SLAVE_PREFERRED	3
+#define MASTER_SLAVE_CFG_MASTER_FORCE		4
+#define MASTER_SLAVE_CFG_SLAVE_FORCE		5
+#define MASTER_SLAVE_STATE_UNSUPPORTED		0
+#define MASTER_SLAVE_STATE_UNKNOWN		1
+#define MASTER_SLAVE_STATE_MASTER		2
+#define MASTER_SLAVE_STATE_SLAVE		3
+#define MASTER_SLAVE_STATE_ERR			4
+
+/* These are used to throttle the rate of data on the phy interface when the
+ * native speed of the interface is higher than the link speed. These should
+ * not be used for phy interfaces which natively support multiple speeds (e.g.
+ * MII or SGMII).
+ */
+/* No rate matching performed. */
+#define RATE_MATCH_NONE		0
+/* The phy sends pause frames to throttle the MAC. */
+#define RATE_MATCH_PAUSE	1
+/* The phy asserts CRS to prevent the MAC from transmitting. */
+#define RATE_MATCH_CRS		2
+/* The MAC is programmed with a sufficiently-large IPG. */
+#define RATE_MATCH_OPEN_LOOP	3
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+#define PORT_DA			0x05
+#define PORT_NONE		0xef
+#define PORT_OTHER		0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00 /* PHY and MAC are in the same package */
+#define XCVR_EXTERNAL		0x01 /* PHY and MAC are in different packages */
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation. */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
+#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
+#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+#define WAKE_FILTER		(1 << 7)
+
+#define WOL_MODE_COUNT		8
+
+/* L2-L4 network traffic flow types */
+#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
+#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
+#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
+#define	AH_ESP_V4_FLOW	0x04	/* hash only */
+#define	TCP_V6_FLOW	0x05	/* hash or spec (tcp_ip6_spec; nfc only) */
+#define	UDP_V6_FLOW	0x06	/* hash or spec (udp_ip6_spec; nfc only) */
+#define	SCTP_V6_FLOW	0x07	/* hash or spec (sctp_ip6_spec; nfc only) */
+#define	AH_ESP_V6_FLOW	0x08	/* hash only */
+#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
+#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
+#define	AH_V6_FLOW	0x0b	/* hash or spec (ah_ip6_spec; nfc only) */
+#define	ESP_V6_FLOW	0x0c	/* hash or spec (esp_ip6_spec; nfc only) */
+#define	IPV4_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
+#define	IP_USER_FLOW	IPV4_USER_FLOW
+#define	IPV6_USER_FLOW	0x0e	/* spec only (usr_ip6_spec; nfc only) */
+#define	IPV4_FLOW	0x10	/* hash only */
+#define	IPV6_FLOW	0x11	/* hash only */
+#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define	FLOW_EXT	0x80000000
+#define	FLOW_MAC_EXT	0x40000000
+/* Flag to enable RSS spreading of traffic matching rule (nfc only) */
+#define	FLOW_RSS	0x20000000
+
+/* L3-L4 network traffic flow hash options */
+#define	RXH_L2DA	(1 << 1)
+#define	RXH_VLAN	(1 << 2)
+#define	RXH_L3_PROTO	(1 << 3)
+#define	RXH_IP_SRC	(1 << 4)
+#define	RXH_IP_DST	(1 << 5)
+#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_DISCARD	(1 << 31)
+
+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
+#define RX_CLS_FLOW_WAKE	0xfffffffffffffffeULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
+#define RX_CLS_LOC_ANY		0xffffffff
+#define RX_CLS_LOC_FIRST	0xfffffffe
+#define RX_CLS_LOC_LAST		0xfffffffd
+
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079		0x1
+#define ETH_MODULE_SFF_8079_LEN		256
+#define ETH_MODULE_SFF_8472		0x2
+#define ETH_MODULE_SFF_8472_LEN		512
+#define ETH_MODULE_SFF_8636		0x3
+#define ETH_MODULE_SFF_8636_LEN		256
+#define ETH_MODULE_SFF_8436		0x4
+#define ETH_MODULE_SFF_8436_LEN		256
+
+#define ETH_MODULE_SFF_8636_MAX_LEN     640
+#define ETH_MODULE_SFF_8436_MAX_LEN     640
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+	ETH_RESET_AP		= 1 << 8,	/* Application processor */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
+
+/**
+ * struct ethtool_link_settings - link control and status
+ *
+ * IMPORTANT, Backward compatibility notice: When implementing new
+ *	user-space tools, please first try %ETHTOOL_GLINKSETTINGS, and
+ *	if it succeeds use %ETHTOOL_SLINKSETTINGS to change link
+ *	settings; do not use %ETHTOOL_SSET if %ETHTOOL_GLINKSETTINGS
+ *	succeeded: stick to %ETHTOOL_GLINKSETTINGS/%SLINKSETTINGS in
+ *	that case.  Conversely, if %ETHTOOL_GLINKSETTINGS fails, use
+ *	%ETHTOOL_GSET to query and %ETHTOOL_SSET to change link
+ *	settings; do not use %ETHTOOL_SLINKSETTINGS if
+ *	%ETHTOOL_GLINKSETTINGS failed: stick to
+ *	%ETHTOOL_GSET/%ETHTOOL_SSET in that case.
+ *
+ * @cmd: Command number = %ETHTOOL_GLINKSETTINGS or %ETHTOOL_SLINKSETTINGS
+ * @speed: Link speed (Mbps)
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ *	applicable.  For clause 45 PHYs this is the PRTAD.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ *	either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ *	protocols supported by the interface; 0 if unknown.
+ *	Read-only.
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ *	%ETH_TP_MDI_*.  If the status is unknown or not applicable, the
+ *	value will be %ETH_TP_MDI_INVALID.  Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ *	%ETH_TP_MDI_*.  If MDI(-X) control is not implemented, reads
+ *	yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ *	When written successfully, the link should be renegotiated if
+ *	necessary.
+ * @link_mode_masks_nwords: Number of 32-bit words for each of the
+ *	supported, advertising, lp_advertising link mode bitmaps. For
+ *	%ETHTOOL_GLINKSETTINGS: on entry, number of words passed by user
+ *	(>= 0); on return, if handshake in progress, negative if
+ *	request size unsupported by kernel: absolute value indicates
+ *	kernel expected size and all the other fields but cmd
+ *	are 0; otherwise (handshake completed), strictly positive
+ *	to indicate size used by kernel and cmd field stays
+ *	%ETHTOOL_GLINKSETTINGS, all other fields populated by driver. For
+ *	%ETHTOOL_SLINKSETTINGS: must be valid on entry, ie. a positive
+ *	value returned previously by %ETHTOOL_GLINKSETTINGS, otherwise
+ *	refused. For drivers: ignore this field (use kernel's
+ *	__ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will
+ *	be overwritten by kernel.
+ * @supported: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features for which the interface
+ *	supports autonegotiation or auto-detection.  Read-only.
+ * @advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features that are advertised through
+ *	autonegotiation or enabled for auto-detection.
+ * @lp_advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, and other
+ *	link features that the link partner advertised through
+ *	autonegotiation; 0 if unknown or not applicable.  Read-only.
+ * @transceiver: Used to distinguish different possible PHY types,
+ *	reported consistently by PHYLIB.  Read-only.
+ * @master_slave_cfg: Master/slave port mode.
+ * @master_slave_state: Master/slave port state.
+ * @rate_matching: Rate adaptation performed by the PHY
+ * @reserved: Reserved for future use; see the note on reserved space.
+ * @link_mode_masks: Variable length bitmaps.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes.  If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted.  For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Deprecated %ethtool_cmd fields transceiver, maxtxpkt and maxrxpkt
+ * are not available in %ethtool_link_settings. These fields will be
+ * always set to zero in %ETHTOOL_GSET reply and %ETHTOOL_SSET will
+ * fail if any of them is set to non-zero value.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver.  They should use
+ * %ETHTOOL_GLINKSETTINGS to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SLINKSETTINGS.
+ *
+ * Drivers that implement %get_link_ksettings and/or
+ * %set_link_ksettings should ignore the @cmd
+ * and @link_mode_masks_nwords fields (any change to them overwritten
+ * by kernel), and rely only on kernel's internal
+ * %__ETHTOOL_LINK_MODE_MASK_NBITS and
+ * %ethtool_link_mode_mask_t. Drivers that implement
+ * %set_link_ksettings() should validate all fields other than @cmd
+ * and @link_mode_masks_nwords that are not described as read-only or
+ * deprecated, and must ignore all fields described as read-only.
+ */
+struct ethtool_link_settings {
+	__u32	cmd;
+	__u32	speed;
+	__u8	duplex;
+	__u8	port;
+	__u8	phy_address;
+	__u8	autoneg;
+	__u8	mdio_support;
+	__u8	eth_tp_mdix;
+	__u8	eth_tp_mdix_ctrl;
+	__s8	link_mode_masks_nwords;
+	__u8	transceiver;
+	__u8	master_slave_cfg;
+	__u8	master_slave_state;
+	__u8	rate_matching;
+	__u32	reserved[7];
+	__u32	link_mode_masks[];
+	/* layout of link_mode_masks fields:
+	 * __u32 map_supported[link_mode_masks_nwords];
+	 * __u32 map_advertising[link_mode_masks_nwords];
+	 * __u32 map_lp_advertising[link_mode_masks_nwords];
+	 */
+};
+#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux-private/linux/falloc.h b/include/linux-private/linux/falloc.h
new file mode 100644
index 0000000..ca3904d
--- /dev/null
+++ b/include/linux-private/linux/falloc.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _FALLOC_H_
+#define _FALLOC_H_
+
+#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
+#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
+#define FALLOC_FL_NO_HIDE_STALE	0x04 /* reserved codepoint */
+
+/*
+ * FALLOC_FL_COLLAPSE_RANGE is used to remove a range of a file
+ * without leaving a hole in the file. The contents of the file beyond
+ * the range being removed is appended to the start offset of the range
+ * being removed (i.e. the hole that was punched is "collapsed"),
+ * resulting in a file layout that looks like the range that was
+ * removed never existed. As such collapsing a range of a file changes
+ * the size of the file, reducing it by the same length of the range
+ * that has been removed by the operation.
+ *
+ * Different filesystems may implement different limitations on the
+ * granularity of the operation. Most will limit operations to
+ * filesystem block size boundaries, but this boundary may be larger or
+ * smaller depending on the filesystem and/or the configuration of the
+ * filesystem or file.
+ *
+ * Attempting to collapse a range that crosses the end of the file is
+ * considered an illegal operation - just use ftruncate(2) if you need
+ * to collapse a range that crosses EOF.
+ */
+#define FALLOC_FL_COLLAPSE_RANGE	0x08
+
+/*
+ * FALLOC_FL_ZERO_RANGE is used to convert a range of file to zeros preferably
+ * without issuing data IO. Blocks should be preallocated for the regions that
+ * span holes in the file, and the entire range is preferable converted to
+ * unwritten extents - even though file system may choose to zero out the
+ * extent or do whatever which will result in reading zeros from the range
+ * while the range remains allocated for the file.
+ *
+ * This can be also used to preallocate blocks past EOF in the same way as
+ * with fallocate. Flag FALLOC_FL_KEEP_SIZE should cause the inode
+ * size to remain the same.
+ */
+#define FALLOC_FL_ZERO_RANGE		0x10
+
+/*
+ * FALLOC_FL_INSERT_RANGE is use to insert space within the file size without
+ * overwriting any existing data. The contents of the file beyond offset are
+ * shifted towards right by len bytes to create a hole.  As such, this
+ * operation will increase the size of the file by len bytes.
+ *
+ * Different filesystems may implement different limitations on the granularity
+ * of the operation. Most will limit operations to filesystem block size
+ * boundaries, but this boundary may be larger or smaller depending on
+ * the filesystem and/or the configuration of the filesystem or file.
+ *
+ * Attempting to insert space using this flag at OR beyond the end of
+ * the file is considered an illegal operation - just use ftruncate(2) or
+ * fallocate(2) with mode 0 for such type of operations.
+ */
+#define FALLOC_FL_INSERT_RANGE		0x20
+
+/*
+ * FALLOC_FL_UNSHARE_RANGE is used to unshare shared blocks within the
+ * file size without overwriting any existing data. The purpose of this
+ * call is to preemptively reallocate any blocks that are subject to
+ * copy-on-write.
+ *
+ * Different filesystems may implement different limitations on the
+ * granularity of the operation. Most will limit operations to filesystem
+ * block size boundaries, but this boundary may be larger or smaller
+ * depending on the filesystem and/or the configuration of the filesystem
+ * or file.
+ *
+ * This flag can only be used with allocate-mode fallocate, which is
+ * to say that it cannot be used with the punch, zero, collapse, or
+ * insert range modes.
+ */
+#define FALLOC_FL_UNSHARE_RANGE		0x40
+
+#endif /* _FALLOC_H_ */
diff --git a/include/linux-private/linux/hdlc/ioctl.h b/include/linux-private/linux/hdlc/ioctl.h
new file mode 100644
index 0000000..b06341a
--- /dev/null
+++ b/include/linux-private/linux/hdlc/ioctl.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __HDLC_IOCTL_H__
+#define __HDLC_IOCTL_H__
+
+
+#define GENERIC_HDLC_VERSION 4	/* For synchronization with sethdlc utility */
+
+#define CLOCK_DEFAULT   0	/* Default setting */
+#define CLOCK_EXT	1	/* External TX and RX clock - DTE */
+#define CLOCK_INT	2	/* Internal TX and RX clock - DCE */
+#define CLOCK_TXINT	3	/* Internal TX and external RX clock */
+#define CLOCK_TXFROMRX	4	/* TX clock derived from external RX clock */
+
+
+#define ENCODING_DEFAULT	0 /* Default setting */
+#define ENCODING_NRZ		1
+#define ENCODING_NRZI		2
+#define ENCODING_FM_MARK	3
+#define ENCODING_FM_SPACE	4
+#define ENCODING_MANCHESTER	5
+
+
+#define PARITY_DEFAULT		0 /* Default setting */
+#define PARITY_NONE		1 /* No parity */
+#define PARITY_CRC16_PR0	2 /* CRC16, initial value 0x0000 */
+#define PARITY_CRC16_PR1	3 /* CRC16, initial value 0xFFFF */
+#define PARITY_CRC16_PR0_CCITT	4 /* CRC16, initial 0x0000, ITU-T version */
+#define PARITY_CRC16_PR1_CCITT	5 /* CRC16, initial 0xFFFF, ITU-T version */
+#define PARITY_CRC32_PR0_CCITT	6 /* CRC32, initial value 0x00000000 */
+#define PARITY_CRC32_PR1_CCITT	7 /* CRC32, initial value 0xFFFFFFFF */
+
+#define LMI_DEFAULT		0 /* Default setting */
+#define LMI_NONE		1 /* No LMI, all PVCs are static */
+#define LMI_ANSI		2 /* ANSI Annex D */
+#define LMI_CCITT		3 /* ITU-T Annex A */
+#define LMI_CISCO		4 /* The "original" LMI, aka Gang of Four */
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned int clock_rate; /* bits per second */
+	unsigned int clock_type; /* internal, external, TX-internal etc. */
+	unsigned short loopback;
+} sync_serial_settings;          /* V.35, V.24, X.21 */
+
+typedef struct {
+	unsigned int clock_rate; /* bits per second */
+	unsigned int clock_type; /* internal, external, TX-internal etc. */
+	unsigned short loopback;
+	unsigned int slot_map;
+} te1_settings;                  /* T1, E1 */
+
+typedef struct {
+	unsigned short encoding;
+	unsigned short parity;
+} raw_hdlc_proto;
+
+typedef struct {
+	unsigned int t391;
+	unsigned int t392;
+	unsigned int n391;
+	unsigned int n392;
+	unsigned int n393;
+	unsigned short lmi;
+	unsigned short dce; /* 1 for DCE (network side) operation */
+} fr_proto;
+
+typedef struct {
+	unsigned int dlci;
+} fr_proto_pvc;          /* for creating/deleting FR PVCs */
+
+typedef struct {
+	unsigned int dlci;
+	char master[IFNAMSIZ];	/* Name of master FRAD device */
+}fr_proto_pvc_info;		/* for returning PVC information only */
+
+typedef struct {
+    unsigned int interval;
+    unsigned int timeout;
+} cisco_proto;
+
+typedef struct {
+	unsigned short dce; /* 1 for DCE (network side) operation */
+	unsigned int modulo; /* modulo (8 = basic / 128 = extended) */
+	unsigned int window; /* frame window size */
+	unsigned int t1; /* timeout t1 */
+	unsigned int t2; /* timeout t2 */
+	unsigned int n2; /* frame retry counter */
+} x25_hdlc_proto;
+
+/* PPP doesn't need any info now - supply length = 0 to ioctl */
+
+#endif /* __ASSEMBLY__ */
+#endif /* __HDLC_IOCTL_H__ */
diff --git a/include/linux-private/linux/if_packet.h b/include/linux-private/linux/if_packet.h
new file mode 100644
index 0000000..9efc423
--- /dev/null
+++ b/include/linux-private/linux/if_packet.h
@@ -0,0 +1,319 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_IF_PACKET_H
+#define __LINUX_IF_PACKET_H
+
+#include <asm/byteorder.h>
+#include <linux/types.h>
+
+struct sockaddr_pkt {
+	unsigned short spkt_family;
+	unsigned char spkt_device[14];
+	__be16 spkt_protocol;
+};
+
+struct sockaddr_ll {
+	unsigned short	sll_family;
+	__be16		sll_protocol;
+	int		sll_ifindex;
+	unsigned short	sll_hatype;
+	unsigned char	sll_pkttype;
+	unsigned char	sll_halen;
+	unsigned char	sll_addr[8];
+};
+
+/* Packet types */
+
+#define PACKET_HOST		0		/* To us		*/
+#define PACKET_BROADCAST	1		/* To all		*/
+#define PACKET_MULTICAST	2		/* To group		*/
+#define PACKET_OTHERHOST	3		/* To someone else 	*/
+#define PACKET_OUTGOING		4		/* Outgoing of any type */
+#define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+#define PACKET_USER		6		/* To user space	*/
+#define PACKET_KERNEL		7		/* To kernel space	*/
+/* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
+#define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
+
+/* Packet socket options */
+
+#define PACKET_ADD_MEMBERSHIP		1
+#define PACKET_DROP_MEMBERSHIP		2
+#define PACKET_RECV_OUTPUT		3
+/* Value 4 is still used by obsolete turbo-packet. */
+#define PACKET_RX_RING			5
+#define PACKET_STATISTICS		6
+#define PACKET_COPY_THRESH		7
+#define PACKET_AUXDATA			8
+#define PACKET_ORIGDEV			9
+#define PACKET_VERSION			10
+#define PACKET_HDRLEN			11
+#define PACKET_RESERVE			12
+#define PACKET_TX_RING			13
+#define PACKET_LOSS			14
+#define PACKET_VNET_HDR			15
+#define PACKET_TX_TIMESTAMP		16
+#define PACKET_TIMESTAMP		17
+#define PACKET_FANOUT			18
+#define PACKET_TX_HAS_OFF		19
+#define PACKET_QDISC_BYPASS		20
+#define PACKET_ROLLOVER_STATS		21
+#define PACKET_FANOUT_DATA		22
+#define PACKET_IGNORE_OUTGOING		23
+#define PACKET_VNET_HDR_SZ		24
+
+#define PACKET_FANOUT_HASH		0
+#define PACKET_FANOUT_LB		1
+#define PACKET_FANOUT_CPU		2
+#define PACKET_FANOUT_ROLLOVER		3
+#define PACKET_FANOUT_RND		4
+#define PACKET_FANOUT_QM		5
+#define PACKET_FANOUT_CBPF		6
+#define PACKET_FANOUT_EBPF		7
+#define PACKET_FANOUT_FLAG_ROLLOVER	0x1000
+#define PACKET_FANOUT_FLAG_UNIQUEID	0x2000
+#define PACKET_FANOUT_FLAG_IGNORE_OUTGOING     0x4000
+#define PACKET_FANOUT_FLAG_DEFRAG	0x8000
+
+struct tpacket_stats {
+	unsigned int	tp_packets;
+	unsigned int	tp_drops;
+};
+
+struct tpacket_stats_v3 {
+	unsigned int	tp_packets;
+	unsigned int	tp_drops;
+	unsigned int	tp_freeze_q_cnt;
+};
+
+struct tpacket_rollover_stats {
+	__aligned_u64	tp_all;
+	__aligned_u64	tp_huge;
+	__aligned_u64	tp_failed;
+};
+
+union tpacket_stats_u {
+	struct tpacket_stats stats1;
+	struct tpacket_stats_v3 stats3;
+};
+
+struct tpacket_auxdata {
+	__u32		tp_status;
+	__u32		tp_len;
+	__u32		tp_snaplen;
+	__u16		tp_mac;
+	__u16		tp_net;
+	__u16		tp_vlan_tci;
+	__u16		tp_vlan_tpid;
+};
+
+/* Rx ring - header status */
+#define TP_STATUS_KERNEL		      0
+#define TP_STATUS_USER			(1 << 0)
+#define TP_STATUS_COPY			(1 << 1)
+#define TP_STATUS_LOSING		(1 << 2)
+#define TP_STATUS_CSUMNOTREADY		(1 << 3)
+#define TP_STATUS_VLAN_VALID		(1 << 4) /* auxdata has valid tp_vlan_tci */
+#define TP_STATUS_BLK_TMO		(1 << 5)
+#define TP_STATUS_VLAN_TPID_VALID	(1 << 6) /* auxdata has valid tp_vlan_tpid */
+#define TP_STATUS_CSUM_VALID		(1 << 7)
+#define TP_STATUS_GSO_TCP		(1 << 8)
+
+/* Tx ring - header status */
+#define TP_STATUS_AVAILABLE	      0
+#define TP_STATUS_SEND_REQUEST	(1 << 0)
+#define TP_STATUS_SENDING	(1 << 1)
+#define TP_STATUS_WRONG_FORMAT	(1 << 2)
+
+/* Rx and Tx ring - header status */
+#define TP_STATUS_TS_SOFTWARE		(1 << 29)
+#define TP_STATUS_TS_SYS_HARDWARE	(1 << 30) /* deprecated, never set */
+#define TP_STATUS_TS_RAW_HARDWARE	(1U << 31)
+
+/* Rx ring - feature request bits */
+#define TP_FT_REQ_FILL_RXHASH	0x1
+
+struct tpacket_hdr {
+	unsigned long	tp_status;
+	unsigned int	tp_len;
+	unsigned int	tp_snaplen;
+	unsigned short	tp_mac;
+	unsigned short	tp_net;
+	unsigned int	tp_sec;
+	unsigned int	tp_usec;
+};
+
+#define TPACKET_ALIGNMENT	16
+#define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
+#define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
+
+struct tpacket2_hdr {
+	__u32		tp_status;
+	__u32		tp_len;
+	__u32		tp_snaplen;
+	__u16		tp_mac;
+	__u16		tp_net;
+	__u32		tp_sec;
+	__u32		tp_nsec;
+	__u16		tp_vlan_tci;
+	__u16		tp_vlan_tpid;
+	__u8		tp_padding[4];
+};
+
+struct tpacket_hdr_variant1 {
+	__u32	tp_rxhash;
+	__u32	tp_vlan_tci;
+	__u16	tp_vlan_tpid;
+	__u16	tp_padding;
+};
+
+struct tpacket3_hdr {
+	__u32		tp_next_offset;
+	__u32		tp_sec;
+	__u32		tp_nsec;
+	__u32		tp_snaplen;
+	__u32		tp_len;
+	__u32		tp_status;
+	__u16		tp_mac;
+	__u16		tp_net;
+	/* pkt_hdr variants */
+	union {
+		struct tpacket_hdr_variant1 hv1;
+	};
+	__u8		tp_padding[8];
+};
+
+struct tpacket_bd_ts {
+	unsigned int ts_sec;
+	union {
+		unsigned int ts_usec;
+		unsigned int ts_nsec;
+	};
+};
+
+struct tpacket_hdr_v1 {
+	__u32	block_status;
+	__u32	num_pkts;
+	__u32	offset_to_first_pkt;
+
+	/* Number of valid bytes (including padding)
+	 * blk_len <= tp_block_size
+	 */
+	__u32	blk_len;
+
+	/*
+	 * Quite a few uses of sequence number:
+	 * 1. Make sure cache flush etc worked.
+	 *    Well, one can argue - why not use the increasing ts below?
+	 *    But look at 2. below first.
+	 * 2. When you pass around blocks to other user space decoders,
+	 *    you can see which blk[s] is[are] outstanding etc.
+	 * 3. Validate kernel code.
+	 */
+	__aligned_u64	seq_num;
+
+	/*
+	 * ts_last_pkt:
+	 *
+	 * Case 1.	Block has 'N'(N >=1) packets and TMO'd(timed out)
+	 *		ts_last_pkt == 'time-stamp of last packet' and NOT the
+	 *		time when the timer fired and the block was closed.
+	 *		By providing the ts of the last packet we can absolutely
+	 *		guarantee that time-stamp wise, the first packet in the
+	 *		next block will never precede the last packet of the
+	 *		previous block.
+	 * Case 2.	Block has zero packets and TMO'd
+	 *		ts_last_pkt = time when the timer fired and the block
+	 *		was closed.
+	 * Case 3.	Block has 'N' packets and NO TMO.
+	 *		ts_last_pkt = time-stamp of the last pkt in the block.
+	 *
+	 * ts_first_pkt:
+	 *		Is always the time-stamp when the block was opened.
+	 *		Case a)	ZERO packets
+	 *			No packets to deal with but atleast you know the
+	 *			time-interval of this block.
+	 *		Case b) Non-zero packets
+	 *			Use the ts of the first packet in the block.
+	 *
+	 */
+	struct tpacket_bd_ts	ts_first_pkt, ts_last_pkt;
+};
+
+union tpacket_bd_header_u {
+	struct tpacket_hdr_v1 bh1;
+};
+
+struct tpacket_block_desc {
+	__u32 version;
+	__u32 offset_to_priv;
+	union tpacket_bd_header_u hdr;
+};
+
+#define TPACKET2_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
+#define TPACKET3_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll))
+
+enum tpacket_versions {
+	TPACKET_V1,
+	TPACKET_V2,
+	TPACKET_V3
+};
+
+/*
+   Frame structure:
+
+   - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
+   - struct tpacket_hdr
+   - pad to TPACKET_ALIGNMENT=16
+   - struct sockaddr_ll
+   - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16
+   - Start+tp_mac: [ Optional MAC header ]
+   - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
+   - Pad to align to TPACKET_ALIGNMENT=16
+ */
+
+struct tpacket_req {
+	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
+	unsigned int	tp_block_nr;	/* Number of blocks */
+	unsigned int	tp_frame_size;	/* Size of frame */
+	unsigned int	tp_frame_nr;	/* Total number of frames */
+};
+
+struct tpacket_req3 {
+	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
+	unsigned int	tp_block_nr;	/* Number of blocks */
+	unsigned int	tp_frame_size;	/* Size of frame */
+	unsigned int	tp_frame_nr;	/* Total number of frames */
+	unsigned int	tp_retire_blk_tov; /* timeout in msecs */
+	unsigned int	tp_sizeof_priv; /* offset to private data area */
+	unsigned int	tp_feature_req_word;
+};
+
+union tpacket_req_u {
+	struct tpacket_req	req;
+	struct tpacket_req3	req3;
+};
+
+struct packet_mreq {
+	int		mr_ifindex;
+	unsigned short	mr_type;
+	unsigned short	mr_alen;
+	unsigned char	mr_address[8];
+};
+
+struct fanout_args {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u16		id;
+	__u16		type_flags;
+#else
+	__u16		type_flags;
+	__u16		id;
+#endif
+	__u32		max_num_members;
+};
+
+#define PACKET_MR_MULTICAST	0
+#define PACKET_MR_PROMISC	1
+#define PACKET_MR_ALLMULTI	2
+#define PACKET_MR_UNICAST	3
+
+#endif
diff --git a/include/linux-private/linux/in_route.h b/include/linux-private/linux/in_route.h
new file mode 100644
index 0000000..0cc2c23
--- /dev/null
+++ b/include/linux-private/linux/in_route.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_IN_ROUTE_H
+#define _LINUX_IN_ROUTE_H
+
+/* IPv4 routing cache flags */
+
+#define RTCF_DEAD	RTNH_F_DEAD
+#define RTCF_ONLINK	RTNH_F_ONLINK
+
+/* Obsolete flag. About to be deleted */
+#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
+
+#define RTCF_NOTIFY	0x00010000
+#define RTCF_DIRECTDST	0x00020000 /* unused */
+#define RTCF_REDIRECTED	0x00040000
+#define RTCF_TPROXY	0x00080000 /* unused */
+
+#define RTCF_FAST	0x00200000 /* unused */
+#define RTCF_MASQ	0x00400000 /* unused */
+#define RTCF_SNAT	0x00800000 /* unused */
+#define RTCF_DOREDIRECT 0x01000000
+#define RTCF_DIRECTSRC	0x04000000
+#define RTCF_DNAT	0x08000000
+#define RTCF_BROADCAST	0x10000000
+#define RTCF_MULTICAST	0x20000000
+#define RTCF_REJECT	0x40000000 /* unused */
+#define RTCF_LOCAL	0x80000000
+
+#define RTCF_NAT	(RTCF_DNAT|RTCF_SNAT)
+
+#define RT_TOS(tos)	((tos)&IPTOS_TOS_MASK)
+
+#endif /* _LINUX_IN_ROUTE_H */
diff --git a/include/linux-private/linux/ioctl.h b/include/linux-private/linux/ioctl.h
new file mode 100644
index 0000000..b292e80
--- /dev/null
+++ b/include/linux-private/linux/ioctl.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_IOCTL_H
+#define _LINUX_IOCTL_H
+
+#include <asm/ioctl.h>
+
+#endif /* _LINUX_IOCTL_H */
+
diff --git a/include/linux-private/linux/limits.h b/include/linux-private/linux/limits.h
new file mode 100644
index 0000000..c3547f0
--- /dev/null
+++ b/include/linux-private/linux/limits.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_LIMITS_H
+#define _LINUX_LIMITS_H
+
+#define NR_OPEN	        1024
+
+#define NGROUPS_MAX    65536	/* supplemental group IDs are available */
+#define ARG_MAX       131072	/* # bytes of args + environ for exec() */
+#define LINK_MAX         127	/* # links a file may have */
+#define MAX_CANON        255	/* size of the canonical input queue */
+#define MAX_INPUT        255	/* size of the type-ahead buffer */
+#define NAME_MAX         255	/* # chars in a file name */
+#define PATH_MAX        4096	/* # chars in a path name including nul */
+#define PIPE_BUF        4096	/* # bytes in atomic write to a pipe */
+#define XATTR_NAME_MAX   255	/* # chars in an extended attribute name */
+#define XATTR_SIZE_MAX 65536	/* size of an extended attribute value (64k) */
+#define XATTR_LIST_MAX 65536	/* size of extended attribute namelist (64k) */
+
+#define RTSIG_MAX	  32
+
+#endif
diff --git a/include/linux-private/linux/netdevice.h b/include/linux-private/linux/netdevice.h
new file mode 100644
index 0000000..86d961c
--- /dev/null
+++ b/include/linux-private/linux/netdevice.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Interfaces handler.
+ *
+ * Version:	@(#)dev.h	1.0.10	08/12/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Bjorn Ekwall. <bj0rn@blox.se>
+ *              Pekka Riikonen <priikone@poseidon.pspt.fi>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *		Moved to /usr/include/linux for NET3
+ */
+#ifndef _LINUX_NETDEVICE_H
+#define _LINUX_NETDEVICE_H
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_link.h>
+
+
+#define MAX_ADDR_LEN	32		/* Largest hardware address length */
+
+/* Initial net device group. All devices belong to group 0 by default. */
+#define INIT_NETDEV_GROUP	0
+
+
+/* interface name assignment types (sysfs name_assign_type attribute) */
+#define NET_NAME_UNKNOWN	0	/* unknown origin (not exposed to userspace) */
+#define NET_NAME_ENUM		1	/* enumerated by kernel */
+#define NET_NAME_PREDICTABLE	2	/* predictably named by the kernel */
+#define NET_NAME_USER		3	/* provided by user-space */
+#define NET_NAME_RENAMED	4	/* renamed by user-space */
+
+/* Media selection options. */
+enum {
+        IF_PORT_UNKNOWN = 0,
+        IF_PORT_10BASE2,
+        IF_PORT_10BASET,
+        IF_PORT_AUI,
+        IF_PORT_100BASET,
+        IF_PORT_100BASETX,
+        IF_PORT_100BASEFX
+};
+
+/* hardware address assignment types */
+#define NET_ADDR_PERM		0	/* address is permanent (default) */
+#define NET_ADDR_RANDOM		1	/* address is generated randomly */
+#define NET_ADDR_STOLEN		2	/* address is stolen from other device */
+#define NET_ADDR_SET		3	/* address is set using
+					 * dev_set_mac_address() */
+
+#endif /* _LINUX_NETDEVICE_H */
diff --git a/include/linux-private/linux/netfilter/nf_conntrack_tcp.h b/include/linux-private/linux/netfilter/nf_conntrack_tcp.h
new file mode 100644
index 0000000..a589dbc
--- /dev/null
+++ b/include/linux-private/linux/netfilter/nf_conntrack_tcp.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _NF_CONNTRACK_TCP_H
+#define _NF_CONNTRACK_TCP_H
+/* TCP tracking. */
+
+#include <linux/types.h>
+
+/* This is exposed to userspace (ctnetlink) */
+enum tcp_conntrack {
+	TCP_CONNTRACK_NONE,
+	TCP_CONNTRACK_SYN_SENT,
+	TCP_CONNTRACK_SYN_RECV,
+	TCP_CONNTRACK_ESTABLISHED,
+	TCP_CONNTRACK_FIN_WAIT,
+	TCP_CONNTRACK_CLOSE_WAIT,
+	TCP_CONNTRACK_LAST_ACK,
+	TCP_CONNTRACK_TIME_WAIT,
+	TCP_CONNTRACK_CLOSE,
+	TCP_CONNTRACK_LISTEN,	/* obsolete */
+#define TCP_CONNTRACK_SYN_SENT2	TCP_CONNTRACK_LISTEN
+	TCP_CONNTRACK_MAX,
+	TCP_CONNTRACK_IGNORE,
+	TCP_CONNTRACK_RETRANS,
+	TCP_CONNTRACK_UNACK,
+	TCP_CONNTRACK_TIMEOUT_MAX
+};
+
+/* Window scaling is advertised by the sender */
+#define IP_CT_TCP_FLAG_WINDOW_SCALE		0x01
+
+/* SACK is permitted by the sender */
+#define IP_CT_TCP_FLAG_SACK_PERM		0x02
+
+/* This sender sent FIN first */
+#define IP_CT_TCP_FLAG_CLOSE_INIT		0x04
+
+/* Be liberal in window checking */
+#define IP_CT_TCP_FLAG_BE_LIBERAL		0x08
+
+/* Has unacknowledged data */
+#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED	0x10
+
+/* The field td_maxack has been set */
+#define IP_CT_TCP_FLAG_MAXACK_SET		0x20
+
+/* Marks possibility for expected RFC5961 challenge ACK */
+#define IP_CT_EXP_CHALLENGE_ACK 		0x40
+
+/* Simultaneous open initialized */
+#define IP_CT_TCP_SIMULTANEOUS_OPEN		0x80
+
+struct nf_ct_tcp_flags {
+	__u8 flags;
+	__u8 mask;
+};
+
+
+#endif /* _NF_CONNTRACK_TCP_H */
diff --git a/include/linux-private/linux/posix_types.h b/include/linux-private/linux/posix_types.h
new file mode 100644
index 0000000..9a7a740
--- /dev/null
+++ b/include/linux-private/linux/posix_types.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_POSIX_TYPES_H
+#define _LINUX_POSIX_TYPES_H
+
+#include <linux/stddef.h>
+
+/*
+ * This allows for 1024 file descriptors: if NR_OPEN is ever grown
+ * beyond that you'll have to change this too. But 1024 fd's seem to be
+ * enough even for such "real" unices like OSF/1, so hopefully this is
+ * one limit that doesn't have to be changed [again].
+ *
+ * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
+ * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
+ * place for them. Solved by having dummy defines in <sys/time.h>.
+ */
+
+/*
+ * This macro may have been defined in <gnu/types.h>. But we always
+ * use the one here.
+ */
+#undef __FD_SETSIZE
+#define __FD_SETSIZE	1024
+
+typedef struct {
+	unsigned long fds_bits[__FD_SETSIZE / (8 * sizeof(long))];
+} __kernel_fd_set;
+
+/* Type of a signal handler.  */
+typedef void (*__kernel_sighandler_t)(int);
+
+/* Type of a SYSV IPC key.  */
+typedef int __kernel_key_t;
+typedef int __kernel_mqd_t;
+
+#include <asm/posix_types.h>
+
+#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/include/linux-private/linux/stddef.h b/include/linux-private/linux/stddef.h
new file mode 100644
index 0000000..bb6ea51
--- /dev/null
+++ b/include/linux-private/linux/stddef.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_STDDEF_H
+#define _LINUX_STDDEF_H
+
+
+
+#ifndef __always_inline
+#define __always_inline __inline__
+#endif
+
+/**
+ * __struct_group() - Create a mirrored named and anonyomous struct
+ *
+ * @TAG: The tag name for the named sub-struct (usually empty)
+ * @NAME: The identifier name of the mirrored sub-struct
+ * @ATTRS: Any struct attributes (usually empty)
+ * @MEMBERS: The member declarations for the mirrored structs
+ *
+ * Used to create an anonymous union of two structs with identical layout
+ * and size: one anonymous and one named. The former's members can be used
+ * normally without sub-struct naming, and the latter can be used to
+ * reason about the start, end, and size of the group of struct members.
+ * The named struct can also be explicitly tagged for layer reuse, as well
+ * as both having struct attributes appended.
+ */
+#define __struct_group(TAG, NAME, ATTRS, MEMBERS...) \
+	union { \
+		struct { MEMBERS } ATTRS; \
+		struct TAG { MEMBERS } ATTRS NAME; \
+	}
+
+/**
+ * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union
+ *
+ * @TYPE: The type of each flexible array element
+ * @NAME: The name of the flexible array member
+ *
+ * In order to have a flexible array member in a union or alone in a
+ * struct, it needs to be wrapped in an anonymous struct with at least 1
+ * named member, but that member can be empty.
+ */
+#define __DECLARE_FLEX_ARRAY(TYPE, NAME)	\
+	struct { \
+		struct { } __empty_ ## NAME; \
+		TYPE NAME[]; \
+	}
+#endif
diff --git a/include/linux-private/linux/swab.h b/include/linux-private/linux/swab.h
new file mode 100644
index 0000000..7e3bad5
--- /dev/null
+++ b/include/linux-private/linux/swab.h
@@ -0,0 +1,305 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_SWAB_H
+#define _LINUX_SWAB_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <asm/bitsperlong.h>
+#include <asm/swab.h>
+
+/*
+ * casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define ___constant_swab16(x) ((__u16)(				\
+	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
+	(((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define ___constant_swab32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
+	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
+	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
+	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define ___constant_swab64(x) ((__u64)(				\
+	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
+	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
+	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
+	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
+	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
+	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
+	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
+	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define ___constant_swahw32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
+	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
+
+#define ___constant_swahb32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
+	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
+
+/*
+ * Implement the following as inlines, but define the interface using
+ * macros to allow constant folding when possible:
+ * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
+ */
+
+static __inline__  __u16 __fswab16(__u16 val)
+{
+#if defined (__arch_swab16)
+	return __arch_swab16(val);
+#else
+	return ___constant_swab16(val);
+#endif
+}
+
+static __inline__  __u32 __fswab32(__u32 val)
+{
+#if defined(__arch_swab32)
+	return __arch_swab32(val);
+#else
+	return ___constant_swab32(val);
+#endif
+}
+
+static __inline__  __u64 __fswab64(__u64 val)
+{
+#if defined (__arch_swab64)
+	return __arch_swab64(val);
+#elif defined(__SWAB_64_THRU_32__)
+	__u32 h = val >> 32;
+	__u32 l = val & ((1ULL << 32) - 1);
+	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
+#else
+	return ___constant_swab64(val);
+#endif
+}
+
+static __inline__  __u32 __fswahw32(__u32 val)
+{
+#ifdef __arch_swahw32
+	return __arch_swahw32(val);
+#else
+	return ___constant_swahw32(val);
+#endif
+}
+
+static __inline__  __u32 __fswahb32(__u32 val)
+{
+#ifdef __arch_swahb32
+	return __arch_swahb32(val);
+#else
+	return ___constant_swahb32(val);
+#endif
+}
+
+/**
+ * __swab16 - return a byteswapped 16-bit value
+ * @x: value to byteswap
+ */
+#ifdef __HAVE_BUILTIN_BSWAP16__
+#define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
+#else
+#define __swab16(x)				\
+	(__u16)(__builtin_constant_p(x) ?	\
+	___constant_swab16(x) :			\
+	__fswab16(x))
+#endif
+
+/**
+ * __swab32 - return a byteswapped 32-bit value
+ * @x: value to byteswap
+ */
+#ifdef __HAVE_BUILTIN_BSWAP32__
+#define __swab32(x) (__u32)__builtin_bswap32((__u32)(x))
+#else
+#define __swab32(x)				\
+	(__u32)(__builtin_constant_p(x) ?	\
+	___constant_swab32(x) :			\
+	__fswab32(x))
+#endif
+
+/**
+ * __swab64 - return a byteswapped 64-bit value
+ * @x: value to byteswap
+ */
+#ifdef __HAVE_BUILTIN_BSWAP64__
+#define __swab64(x) (__u64)__builtin_bswap64((__u64)(x))
+#else
+#define __swab64(x)				\
+	(__u64)(__builtin_constant_p(x) ?	\
+	___constant_swab64(x) :			\
+	__fswab64(x))
+#endif
+
+static __always_inline unsigned long __swab(const unsigned long y)
+{
+#if __BITS_PER_LONG == 64
+	return __swab64(y);
+#else /* __BITS_PER_LONG == 32 */
+	return __swab32(y);
+#endif
+}
+
+/**
+ * __swahw32 - return a word-swapped 32-bit value
+ * @x: value to wordswap
+ *
+ * __swahw32(0x12340000) is 0x00001234
+ */
+#define __swahw32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahw32(x) :		\
+	__fswahw32(x))
+
+/**
+ * __swahb32 - return a high and low byte-swapped 32-bit value
+ * @x: value to byteswap
+ *
+ * __swahb32(0x12345678) is 0x34127856
+ */
+#define __swahb32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahb32(x) :		\
+	__fswahb32(x))
+
+/**
+ * __swab16p - return a byteswapped 16-bit value from a pointer
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static __always_inline __u16 __swab16p(const __u16 *p)
+{
+#ifdef __arch_swab16p
+	return __arch_swab16p(p);
+#else
+	return __swab16(*p);
+#endif
+}
+
+/**
+ * __swab32p - return a byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static __always_inline __u32 __swab32p(const __u32 *p)
+{
+#ifdef __arch_swab32p
+	return __arch_swab32p(p);
+#else
+	return __swab32(*p);
+#endif
+}
+
+/**
+ * __swab64p - return a byteswapped 64-bit value from a pointer
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static __always_inline __u64 __swab64p(const __u64 *p)
+{
+#ifdef __arch_swab64p
+	return __arch_swab64p(p);
+#else
+	return __swab64(*p);
+#endif
+}
+
+/**
+ * __swahw32p - return a wordswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping.
+ */
+static __inline__ __u32 __swahw32p(const __u32 *p)
+{
+#ifdef __arch_swahw32p
+	return __arch_swahw32p(p);
+#else
+	return __swahw32(*p);
+#endif
+}
+
+/**
+ * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high/low byteswapping.
+ */
+static __inline__ __u32 __swahb32p(const __u32 *p)
+{
+#ifdef __arch_swahb32p
+	return __arch_swahb32p(p);
+#else
+	return __swahb32(*p);
+#endif
+}
+
+/**
+ * __swab16s - byteswap a 16-bit value in-place
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static __inline__ void __swab16s(__u16 *p)
+{
+#ifdef __arch_swab16s
+	__arch_swab16s(p);
+#else
+	*p = __swab16p(p);
+#endif
+}
+/**
+ * __swab32s - byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static __always_inline void __swab32s(__u32 *p)
+{
+#ifdef __arch_swab32s
+	__arch_swab32s(p);
+#else
+	*p = __swab32p(p);
+#endif
+}
+
+/**
+ * __swab64s - byteswap a 64-bit value in-place
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static __always_inline void __swab64s(__u64 *p)
+{
+#ifdef __arch_swab64s
+	__arch_swab64s(p);
+#else
+	*p = __swab64p(p);
+#endif
+}
+
+/**
+ * __swahw32s - wordswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping
+ */
+static __inline__ void __swahw32s(__u32 *p)
+{
+#ifdef __arch_swahw32s
+	__arch_swahw32s(p);
+#else
+	*p = __swahw32p(p);
+#endif
+}
+
+/**
+ * __swahb32s - high and low byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high and low byte swapping
+ */
+static __inline__ void __swahb32s(__u32 *p)
+{
+#ifdef __arch_swahb32s
+	__arch_swahb32s(p);
+#else
+	*p = __swahb32p(p);
+#endif
+}
+
+
+#endif /* _LINUX_SWAB_H */
diff --git a/include/linux-private/linux/taskstats.h b/include/linux-private/linux/taskstats.h
new file mode 100644
index 0000000..b50b2eb
--- /dev/null
+++ b/include/linux-private/linux/taskstats.h
@@ -0,0 +1,252 @@
+/* SPDX-License-Identifier: LGPL-2.1 WITH Linux-syscall-note */
+/* taskstats.h - exporting per-task statistics
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *           (C) Balbir Singh,   IBM Corp. 2006
+ *           (C) Jay Lan,        SGI, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _LINUX_TASKSTATS_H
+#define _LINUX_TASKSTATS_H
+
+#include <linux/types.h>
+
+/* Format for per-task data returned to userland when
+ *	- a task exits
+ *	- listener requests stats for a task
+ *
+ * The struct is versioned. Newer versions should only add fields to
+ * the bottom of the struct to maintain backward compatibility.
+ *
+ *
+ * To add new fields
+ *	a) bump up TASKSTATS_VERSION
+ *	b) add comment indicating new version number at end of struct
+ *	c) add new fields after version comment; maintain 64-bit alignment
+ */
+
+
+#define TASKSTATS_VERSION	14
+#define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
+					 * in linux/sched.h */
+
+struct taskstats {
+
+	/* The version number of this struct. This field is always set to
+	 * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
+	 * Each time the struct is changed, the value should be incremented.
+	 */
+	__u16	version;
+	__u32	ac_exitcode;		/* Exit status */
+
+	/* The accounting flags of a task as defined in <linux/acct.h>
+	 * Defined values are AFORK, ASU, ACOMPAT, ACORE, AXSIG, and AGROUP.
+	 * (AGROUP since version 12).
+	 */
+	__u8	ac_flag;		/* Record flags */
+	__u8	ac_nice;		/* task_nice */
+
+	/* Delay accounting fields start
+	 *
+	 * All values, until comment "Delay accounting fields end" are
+	 * available only if delay accounting is enabled, even though the last
+	 * few fields are not delays
+	 *
+	 * xxx_count is the number of delay values recorded
+	 * xxx_delay_total is the corresponding cumulative delay in nanoseconds
+	 *
+	 * xxx_delay_total wraps around to zero on overflow
+	 * xxx_count incremented regardless of overflow
+	 */
+
+	/* Delay waiting for cpu, while runnable
+	 * count, delay_total NOT updated atomically
+	 */
+	__u64	cpu_count __attribute__((aligned(8)));
+	__u64	cpu_delay_total;
+
+	/* Following four fields atomically updated using task->delays->lock */
+
+	/* Delay waiting for synchronous block I/O to complete
+	 * does not account for delays in I/O submission
+	 */
+	__u64	blkio_count;
+	__u64	blkio_delay_total;
+
+	/* Delay waiting for page fault I/O (swap in only) */
+	__u64	swapin_count;
+	__u64	swapin_delay_total;
+
+	/* cpu "wall-clock" running time
+	 * On some architectures, value will adjust for cpu time stolen
+	 * from the kernel in involuntary waits due to virtualization.
+	 * Value is cumulative, in nanoseconds, without a corresponding count
+	 * and wraps around to zero silently on overflow
+	 */
+	__u64	cpu_run_real_total;
+
+	/* cpu "virtual" running time
+	 * Uses time intervals seen by the kernel i.e. no adjustment
+	 * for kernel's involuntary waits due to virtualization.
+	 * Value is cumulative, in nanoseconds, without a corresponding count
+	 * and wraps around to zero silently on overflow
+	 */
+	__u64	cpu_run_virtual_total;
+	/* Delay accounting fields end */
+	/* version 1 ends here */
+
+	/* Basic Accounting Fields start */
+	char	ac_comm[TS_COMM_LEN];	/* Command name */
+	__u8	ac_sched __attribute__((aligned(8)));
+					/* Scheduling discipline */
+	__u8	ac_pad[3];
+	__u32	ac_uid __attribute__((aligned(8)));
+					/* User ID */
+	__u32	ac_gid;			/* Group ID */
+	__u32	ac_pid;			/* Process ID */
+	__u32	ac_ppid;		/* Parent process ID */
+	/* __u32 range means times from 1970 to 2106 */
+	__u32	ac_btime;		/* Begin time [sec since 1970] */
+	__u64	ac_etime __attribute__((aligned(8)));
+					/* Elapsed time [usec] */
+	__u64	ac_utime;		/* User CPU time [usec] */
+	__u64	ac_stime;		/* SYstem CPU time [usec] */
+	__u64	ac_minflt;		/* Minor Page Fault Count */
+	__u64	ac_majflt;		/* Major Page Fault Count */
+	/* Basic Accounting Fields end */
+
+	/* Extended accounting fields start */
+	/* Accumulated RSS usage in duration of a task, in MBytes-usecs.
+	 * The current rss usage is added to this counter every time
+	 * a tick is charged to a task's system time. So, at the end we
+	 * will have memory usage multiplied by system time. Thus an
+	 * average usage per system time unit can be calculated.
+	 */
+	__u64	coremem;		/* accumulated RSS usage in MB-usec */
+	/* Accumulated virtual memory usage in duration of a task.
+	 * Same as acct_rss_mem1 above except that we keep track of VM usage.
+	 */
+	__u64	virtmem;		/* accumulated VM  usage in MB-usec */
+
+	/* High watermark of RSS and virtual memory usage in duration of
+	 * a task, in KBytes.
+	 */
+	__u64	hiwater_rss;		/* High-watermark of RSS usage, in KB */
+	__u64	hiwater_vm;		/* High-water VM usage, in KB */
+
+	/* The following four fields are I/O statistics of a task. */
+	__u64	read_char;		/* bytes read */
+	__u64	write_char;		/* bytes written */
+	__u64	read_syscalls;		/* read syscalls */
+	__u64	write_syscalls;		/* write syscalls */
+	/* Extended accounting fields end */
+
+#define TASKSTATS_HAS_IO_ACCOUNTING
+	/* Per-task storage I/O accounting starts */
+	__u64	read_bytes;		/* bytes of read I/O */
+	__u64	write_bytes;		/* bytes of write I/O */
+	__u64	cancelled_write_bytes;	/* bytes of cancelled write I/O */
+
+	__u64  nvcsw;			/* voluntary_ctxt_switches */
+	__u64  nivcsw;			/* nonvoluntary_ctxt_switches */
+
+	/* time accounting for SMT machines */
+	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
+	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
+	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
+
+	/* Delay waiting for memory reclaim */
+	__u64	freepages_count;
+	__u64	freepages_delay_total;
+
+	/* Delay waiting for thrashing page */
+	__u64	thrashing_count;
+	__u64	thrashing_delay_total;
+
+	/* v10: 64-bit btime to avoid overflow */
+	__u64	ac_btime64;		/* 64-bit begin time */
+
+	/* v11: Delay waiting for memory compact */
+	__u64	compact_count;
+	__u64	compact_delay_total;
+
+	/* v12 begin */
+	__u32   ac_tgid;	/* thread group ID */
+	/* Thread group walltime up to now. This is total process walltime if
+	 * AGROUP flag is set.
+	 */
+	__u64	ac_tgetime __attribute__((aligned(8)));
+	/* Lightweight information to identify process binary files.
+	 * This leaves userspace to match this to a file system path, using
+	 * MAJOR() and MINOR() macros to identify a device and mount point,
+	 * the inode to identify the executable file. This is /proc/self/exe
+	 * at the end, so matching the most recent exec(). Values are zero
+	 * for kernel threads.
+	 */
+	__u64   ac_exe_dev;     /* program binary device ID */
+	__u64   ac_exe_inode;   /* program binary inode number */
+	/* v12 end */
+
+	/* v13: Delay waiting for write-protect copy */
+	__u64    wpcopy_count;
+	__u64    wpcopy_delay_total;
+
+	/* v14: Delay waiting for IRQ/SOFTIRQ */
+	__u64    irq_count;
+	__u64    irq_delay_total;
+};
+
+
+/*
+ * Commands sent from userspace
+ * Not versioned. New commands should only be inserted at the enum's end
+ * prior to __TASKSTATS_CMD_MAX
+ */
+
+enum {
+	TASKSTATS_CMD_UNSPEC = 0,	/* Reserved */
+	TASKSTATS_CMD_GET,		/* user->kernel request/get-response */
+	TASKSTATS_CMD_NEW,		/* kernel->user event */
+	__TASKSTATS_CMD_MAX,
+};
+
+#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
+
+enum {
+	TASKSTATS_TYPE_UNSPEC = 0,	/* Reserved */
+	TASKSTATS_TYPE_PID,		/* Process id */
+	TASKSTATS_TYPE_TGID,		/* Thread group id */
+	TASKSTATS_TYPE_STATS,		/* taskstats structure */
+	TASKSTATS_TYPE_AGGR_PID,	/* contains pid + stats */
+	TASKSTATS_TYPE_AGGR_TGID,	/* contains tgid + stats */
+	TASKSTATS_TYPE_NULL,		/* contains nothing */
+	__TASKSTATS_TYPE_MAX,
+};
+
+#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
+
+enum {
+	TASKSTATS_CMD_ATTR_UNSPEC = 0,
+	TASKSTATS_CMD_ATTR_PID,
+	TASKSTATS_CMD_ATTR_TGID,
+	TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
+	TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
+	__TASKSTATS_CMD_ATTR_MAX,
+};
+
+#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
+
+/* NETLINK_GENERIC related info */
+
+#define TASKSTATS_GENL_NAME	"TASKSTATS"
+#define TASKSTATS_GENL_VERSION	0x1
+
+#endif /* _LINUX_TASKSTATS_H */
diff --git a/include/linux-private/linux/tc_ematch/tc_em_cmp.h b/include/linux-private/linux/tc_ematch/tc_em_cmp.h
new file mode 100644
index 0000000..2549d9d
--- /dev/null
+++ b/include/linux-private/linux/tc_ematch/tc_em_cmp.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_TC_EM_CMP_H
+#define __LINUX_TC_EM_CMP_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+struct tcf_em_cmp {
+	__u32		val;
+	__u32		mask;
+	__u16		off;
+	__u8		align:4;
+	__u8		flags:4;
+	__u8		layer:4;
+	__u8		opnd:4;
+};
+
+enum {
+	TCF_EM_ALIGN_U8  = 1,
+	TCF_EM_ALIGN_U16 = 2,
+	TCF_EM_ALIGN_U32 = 4
+};
+
+#define TCF_EM_CMP_TRANS	1
+
+#endif
diff --git a/include/linux-private/linux/tc_ematch/tc_em_nbyte.h b/include/linux-private/linux/tc_ematch/tc_em_nbyte.h
new file mode 100644
index 0000000..c76333f
--- /dev/null
+++ b/include/linux-private/linux/tc_ematch/tc_em_nbyte.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_TC_EM_NBYTE_H
+#define __LINUX_TC_EM_NBYTE_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+struct tcf_em_nbyte {
+	__u16		off;
+	__u16		len:12;
+	__u8		layer:4;
+};
+
+#endif
diff --git a/include/linux-private/linux/tc_ematch/tc_em_text.h b/include/linux-private/linux/tc_ematch/tc_em_text.h
new file mode 100644
index 0000000..b0a9225
--- /dev/null
+++ b/include/linux-private/linux/tc_ematch/tc_em_text.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_TC_EM_TEXT_H
+#define __LINUX_TC_EM_TEXT_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+#define TC_EM_TEXT_ALGOSIZ	16
+
+struct tcf_em_text {
+	char		algo[TC_EM_TEXT_ALGOSIZ];
+	__u16		from_offset;
+	__u16		to_offset;
+	__u16		pattern_len;
+	__u8		from_layer:4;
+	__u8		to_layer:4;
+	__u8		pad;
+};
+
+#endif
diff --git a/include/linux-private/linux/types.h b/include/linux-private/linux/types.h
new file mode 100644
index 0000000..6546100
--- /dev/null
+++ b/include/linux-private/linux/types.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_TYPES_H
+#define _LINUX_TYPES_H
+
+#include <asm/types.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/posix_types.h>
+
+
+/*
+ * Below are truly Linux-specific types that should never collide with
+ * any application/library that wants linux/types.h.
+ */
+
+/* sparse defines __CHECKER__; see Documentation/dev-tools/sparse.rst */
+#ifdef __CHECKER__
+#define __bitwise	__attribute__((bitwise))
+#else
+#define __bitwise
+#endif
+
+/* The kernel doesn't use this legacy form, but user space does */
+#define __bitwise__ __bitwise
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+
+/*
+ * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
+ * common 32/64-bit compat problems.
+ * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
+ * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
+ * aligned_64 type enforces 8-byte alignment so that structs containing
+ * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
+ * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
+ */
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+#define __aligned_be64 __be64 __attribute__((aligned(8)))
+#define __aligned_le64 __le64 __attribute__((aligned(8)))
+
+typedef unsigned __bitwise __poll_t;
+
+#endif /*  __ASSEMBLY__ */
+#endif /* _LINUX_TYPES_H */
diff --git a/include/linux-private/linux/version.h b/include/linux-private/linux/version.h
new file mode 100644
index 0000000..4ae7bc0
--- /dev/null
+++ b/include/linux-private/linux/version.h
@@ -0,0 +1,5 @@
+#define LINUX_VERSION_CODE 394240
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c)))
+#define LINUX_VERSION_MAJOR 6
+#define LINUX_VERSION_PATCHLEVEL 4
+#define LINUX_VERSION_SUBLEVEL 0