minor man page update

1 files changed, 161 insertions, 228 deletions

diff --git a/programs/lz4.1 b/programs/lz4.1
index 2c94033..d73a7ed 100644
--- a/programs/lz4.1
+++ b/programs/lz4.1
@@ -1,251 +1,184 @@
-\."
-\." lz4.1: This is a manual page for 'lz4' program. This file is part of the
-\." lz4 <http://www.lz4.org/> project.
-\." Author: Yann Collet
-\."
-.
-\." No hyphenation
-.hy 0
-.nr HY 0
-.
-.TH lz4 "1" "2015-03-21" "lz4" "User Commands"
-.SH NAME
-\fBlz4, unlz4, lz4cat\fR \- Compress or decompress .lz4 files
-
-.SH SYNOPSIS
-.TP 5
-\fBlz4\fR [\fBOPTIONS\fR] [-|INPUT-FILE] <OUTPUT-FILE>
-.PP
-.B unlz4
-is equivalent to
-.BR "lz4 \-d"
-.br
-.B lz4cat
-is equivalent to
-.BR "lz4 \-dcfm"
-.br
-.PP
-When writing scripts that need to decompress files,
-it is recommended to always use the name
-.B lz4
-with appropriate arguments
-.RB ( "lz4 \-d"
-or
-.BR "lz4 \-dc" )
-instead of the names
-.B unlz4
-and
-.BR lz4cat .
-
-
-.SH DESCRIPTION
-.PP
-\fBlz4\fR is an extremely fast lossless compression algorithm,
-based on \fBbyte-aligned LZ77\fR family of compression scheme.
-\fBlz4\fR offers compression speeds of 400 MB/s per core, linearly scalable with multi-core CPUs.
-It features an extremely fast decoder, with speed in multiple GB/s per core,
-typically reaching RAM speed limit on multi-core systems.
-The native file format is the
-.B .lz4
-format.
-
-.B lz4
-supports a command line syntax similar \fIbut not identical\fR to
-.BR gzip (1).
-Differences are :
- \fBlz4\fR preserves original files
- \fBlz4\fR compresses a single file by default (use \fB-m\fR for multiple files)
- \fBlz4 file1 file2\fR means : compress file1 \fIinto\fR file2
- When no destination name is provided, compressed file name receives a \fB.lz4\fR suffix
- When no destination name is provided, if \fBstdout\fR is \fInot\fR the console, it becomes the output (like a silent \fB-c\fR)
-      Therefore \fBlz4 file > /dev/null\fR will not create \fBfile.lz4\fR
- \fBlz4 file\fR shows real-time statistics during compression (use \fB-q\fR to silent them)
-
-Default behaviors can be modified by opt-in commands, described below.
-\fBlz4 --quiet --multiple\fR more closely mimics \fBgzip\fR behavior.
-
-.SS "Concatenation of .lz4 files"
-It is possible to concatenate
-.B .lz4
-files as is.
-.B lz4
-will decompress such files as if they were a single
-.B .lz4
-file. For example:
-  lz4 file1  > foo.lz4
-  lz4 file2 >> foo.lz4
- then
-  lz4cat foo.lz4
- is equivalent to :
-  cat file1 file2
-
-.PP
-
-.SH OPTIONS
+.
+.TH "LZ4" "1" "November 2016" "lz4 1.7.4" "User Commands"
+.
+.SH "NAME"
+\fBlz4\fR \- lz4, unlz4, lz4cat \- Compress or decompress \.lz4 files
+.
+.SH "SYNOPSIS"
+\fBlz4\fR [\fIOPTIONS\fR] [\-|INPUT\-FILE] \fIOUTPUT\-FILE\fR
+.
+.P
+\fBunlz4\fR is equivalent to \fBlz4 \-d\fR
+.
+.P
+\fBlz4cat\fR is equivalent to \fBlz4 \-dcfm\fR
+.
+.P
+When writing scripts that need to decompress files, it is recommended to always use the name \fBlz4\fR with appropriate arguments (\fBlz4 \-d\fR or \fBlz4 \-dc\fR) instead of the names \fBunlz4\fR and \fBlz4cat\fR\.
+.
+.SH "DESCRIPTION"
+\fBlz4\fR is an extremely fast lossless compression algorithm, based on \fBbyte\-aligned LZ77\fR family of compression scheme\. \fBlz4\fR offers compression speeds of 400 MB/s per core, linearly scalable with multi\-core CPUs\. It features an extremely fast decoder, with speed in multiple GB/s per core, typically reaching RAM speed limit on multi\-core systems\. The native file format is the \fB\.lz4\fR format\.
+.
+.SS "Difference between lz4 and gzip"
+\fBlz4\fR supports a command line syntax similar \fIbut not identical\fR to \fBgzip(1)\fR\. Differences are :
+.
+.IP "\(bu" 4
+\fBlz4\fR preserves original files
+.
+.IP "\(bu" 4
+\fBlz4\fR compresses a single file by default (use \fB\-m\fR for multiple files)
+.
+.IP "\(bu" 4
+\fBlz4 file1 file2\fR means : compress file1 \fIinto\fR file2
+.
+.IP "\(bu" 4
+When no destination name is provided, compressed file name receives a \fB\.lz4\fR suffix
+.
+.IP "\(bu" 4
+When no destination name is provided, if \fBstdout\fR is \fInot\fR the console, it becomes the output (like a silent \fB\-c\fR)\. Therefore \fBlz4 file > /dev/null\fR will not create \fBfile\.lz4\fR
+.
+.IP "\(bu" 4
+\fBlz4 file\fR shows real\-time statistics during compression (use \fB\-q\fR to silent them)
+.
+.IP "" 0
+.
+.P
+Default behaviors can be modified by opt\-in commands, described below\. \fBlz4 \-m\fR more closely follows \fBgzip\fR command line syntax, supporting compression of multiple files into \fB\.lz4\fR, the last remaining difference being that source files are preserved by default\. Since it\'s also possible to erase source file using opt\-in command \fB\-\-rm\fR, \fBlz4 \-m \-\-rm\fR behaves the same as \fBgzip\fR\.
+.
+.SS "Concatenation of \.lz4 files"
+It is possible to concatenate \fB\.lz4\fR files as is\. \fBlz4\fR will decompress such files as if they were a single \fB\.lz4\fR file\. For example: lz4 file1 > foo\.lz4 lz4 file2 >> foo\.lz4
+.
+.P
+then lz4cat foo\.lz4
+.
+.P
+is equivalent to : cat file1 file2
+.
+.SH "OPTIONS"
 .
 .SS "Short commands concatenation"
-In some cases, some options can be expressed using short command
-.B "-x"
-or long command
-.B "--long-word" .
-Short commands can be concatenated together. For example,
-.B "-d -c"
-is equivalent to
-.B "-dc" .
-Long commands cannot be concatenated.
-They must be clearly separated by a space.
+In some cases, some options can be expressed using short command \fB\-x\fR or long command \fB\-\-long\-word\fR\. Short commands can be concatenated together\. For example, \fB\-d \-c\fR is equivalent to \fB\-dc\fR\. Long commands cannot be concatenated\. They must be clearly separated by a space\.
+.
 .SS "Multiple commands"
-When multiple contradictory commands are issued on a same command line,
-only the latest one will be applied.
+When multiple contradictory commands are issued on a same command line, only the latest one will be applied\.
 .
 .SS "Operation mode"
+.
+.TP
+\fB\-z\fR \fB\-\-compress\fR
+Compress\. This is the default operation mode when no operation mode option is specified, no other operation mode is implied from the command name (for example, \fBunlz4\fR implies \fB\-\-decompress\fR), nor from the input file name (for example, a file extension \fB\.lz4\fR implies \fB\-\-decompress\fR by default)\. \fB\-z\fR can also be used to force compression of an already compressed \fB\.lz4\fR file\.
+.
 .TP
-.BR \-z ", " \-\-compress
-Compress.
-This is the default operation mode
-when no operation mode option is specified ,
-no other operation mode is implied from the command name
-(for example,
-.B unlz4
-implies
-.B \-\-decompress ),
-nor from the input file name
-(for example, a file extension
-.B .lz4
-implies
-.B \-\-decompress
-by default).
-.B -z
-can also be used to force compression of an already compressed
-.B .lz4
-file.
-.TP
-.BR \-d ", " \-\-decompress ", " \-\-uncompress
-Decompress.
-.B --decompress
-is also the default operation when the input filename has an
-.B .lz4
-extension.
-.TP
-.BR \-t ", " \-\-test
-Test the integrity of compressed
-.B .lz4
-files.
-The decompressed data is discarded.
-No files are created nor removed.
-
-.TP
-.BR \-b#
-Benchmark mode, using # compression level.
-
+\fB\-d\fR \fB\-\-decompress\fR \fB\-\-uncompress\fR
+Decompress\. \fB\-\-decompress\fR is also the default operation when the input filename has an \fB\.lz4\fR extension\.
+.
+.TP
+\fB\-t\fR \fB\-\-test\fR
+Test the integrity of compressed \fB\.lz4\fR files\. The decompressed data is discarded\. No files are created nor removed\.
+.
+.TP
+\fB\-b#\fR
+Benchmark mode, using \fB#\fR compression level\.
 .
 .SS "Operation modifiers"
+.
+.TP
+\fB\-#\fR
+Compression level, with # being any value from 1 to 16\. Higher values trade compression speed for compression ratio\. Values above 16 are considered the same as 16\. Recommended values are 1 for fast compression (default), and 9 for high compression\. Speed/compression trade\-off will vary depending on data to compress\. Decompression speed remains fast at all settings\.
+.
+.TP
+\fB\-f\fR \fB\-\-[no\-]force\fR
+This option has several effects:
+.
+.IP
+If the target file already exists, overwrite it without prompting\.
+.
+.IP
+When used with \fB\-\-decompress\fR and \fBlz4\fR cannot recognize the type of the source file, copy the source file as is to standard output\. This allows \fBlz4cat \-\-force\fR to be used like \fBcat (1)\fR for files that have not been compressed with \fBlz4\fR\.
+.
+.TP
+\fB\-c\fR \fB\-\-stdout\fR \fB\-\-to\-stdout\fR
+Force write to standard output, even if it is the console\.
+.
+.TP
+\fB\-m\fR \fB\-\-multiple\fR
+Multiple file names\. By default, the second filename is used as the destination filename for the compressed file\. With \fB\-m\fR, it is possible to specify any number of input filenames\. Each of them will be compressed independently, and the resulting name of each compressed file will be \fBfilename\.lz4\fR\. This mode also reduces notification level\.
+.
+.TP
+\fB\-B#\fR
+Block size [4\-7](default : 7)
+.
+.br
+\fB\-B4\fR= 64KB ; \fB\-B5\fR= 256KB ; \fB\-B6\fR= 1MB ; \fB\-B7\fR= 4MB
+.
+.TP
+\fB\-BD\fR
+Block dependency (improves compression ratio on small blocks)
+.
+.TP
+\fB\-\-[no\-]frame\-crc\fR
+Select frame checksum (default:enabled)
+.
+.TP
+\fB\-\-[no\-]content\-size\fR
+Header includes original size (default:not present)
+.
+.br
+Note : this option can only be activated when the original size can be determined, hence for a file\. It won\'t work with unknown source size, such as stdin or pipe\.
+.
 .TP
-.B \-#
- compression level, with # being any value from 1 to 16.
- Higher values trade compression speed for compression ratio.
- Values above 16 are considered the same as 16.
- Recommended values are 1 for fast compression (default), and 9 for high compression.
- Speed/compression trade-off will vary depending on data to compress.
- Decompression speed remains fast at all settings.
-
-.TP
-.BR \-f ", " --[no-]force
- This option has several effects:
-.RS
-.IP \(bu 3
-If the target file already exists,
-overwrite it without prompting.
-.IP \(bu 3
-When used with
-.B \-\-decompress
-and
-.B lz4
-cannot recognize the type of the source file,
-copy the source file as is to standard output.
-This allows
-.B lz4cat
-.B \-\-force
-to be used like
-.BR cat (1)
-for files that have not been compressed with
-.BR lz4 .
-.RE
-
-.TP
-.BR \-c ", " \--stdout ", " \--to-stdout
- force write to standard output, even if it is the console
-
-.TP
-.BR \-m ", " \--multiple
- Multiple file names.
- By default, the second filename is used as the destination filename for the compressed file.
- With
-.B -m
-, it is possible to specify any number of input filenames. Each of them will be compressed
-independently, and the resulting name of each compressed file will be
-.B filename.lz4
-.
-
-.TP
-.B \-B#
- block size [4-7](default : 7)
- B4= 64KB ; B5= 256KB ; B6= 1MB ; B7= 4MB
-.TP
-.B \-BD
- block dependency (improves compression ratio on small blocks)
-.TP
-.B \--[no-]frame-crc
- select frame checksum (default:enabled)
-.TP
-.B \--[no-]content-size
- header includes original size (default:not present)
- Note : this option can only be activated when the original size can be determined,
-hence for a file. It won't work with unknown source size, such as stdin or pipe.
-.TP
-.B \--[no-]sparse
- sparse mode support (default:enabled on file, disabled on stdout)
-.TP
-.B \-l
- use Legacy format (typically used for Linux Kernel compression)
- note : \fB-l\fR is not compatible with \fB-m\fR (\fB--multiple\fR)
+\fB\-\-[no\-]sparse\fR
+Sparse mode support (default:enabled on file, disabled on stdout)
+.
+.TP
+\fB\-l\fR
+Use Legacy format (typically used for Linux Kernel compression)
+.
+.br
+Note : \fB\-l\fR is not compatible with \fB\-m\fR (\fB\-\-multiple\fR)
 .
 .SS "Other options"
+.
 .TP
-.BR \-v ", " --verbose
- verbose mode
+\fB\-v\fR \fB\-\-verbose\fR
+Verbose mode
+.
 .TP
-.BR \-q ", " --quiet
- suppress warnings and real-time statistics; specify twice to suppress errors too
+\fB\-q\fR \fB\-\-quiet\fR
+Suppress warnings and real\-time statistics; specify twice to suppress errors too
+.
 .TP
-.B \-h/\-H ", " --help
- display help/long help and exit
+\fB\-h\fR \fB\-H\fR \fB\-\-help\fR
+Display help/long help and exit
+.
 .TP
-.BR \-V ", " \--version
- display Version number and exit
+\fB\-V\fR \fB\-\-version\fR
+Display Version number and exit
+.
 .TP
-.BR \-k ", " \--keep
- Don't delete source file.
-This is default behavior anyway, so this option is just for compatibility with gzip/xz.
-
+\fB\-k\fR \fB\-\-keep\fR
+Don\'t delete source file\. This is default behavior anyway, so this option is just for compatibility with \fBgzip(1)\fR / \fBxz(1)\fR\.
 .
 .SS "Benchmark mode"
+.
 .TP
-.B \-b#
- benchmark file(s), using # compression level
+\fB\-b#\fR
+Benchmark file(s), using # compression level
+.
 .TP
-.B \-e#
- benchmark multiple compression levels, from b# to e# (included)
+\fB\-e#\fR
+Benchmark multiple compression levels, from b# to e# (included)
+.
 .TP
-.B \-i#
- minimum evaluation in seconds [1-9] (default : 3)
+\fB\-i#\fR
+Minimum evaluation in seconds [1\-9] (default : 3)
+.
 .TP
-.B \-r
- operate recursively on directories
-
-
-.SH BUGS
-Report bugs at: https://github.com/Cyan4973/lz4/issues
-
-.SH AUTHOR
+\fB\-r\fR
+Operate recursively on directories
+.
+.SH "BUGS"
+Report bugs at: https://github\.com/lz4/lz4/issues
+.
+.SH "AUTHOR"
 Yann Collet