diff options
Diffstat (limited to 'lib/lz4.h')
-rw-r--r-- | lib/lz4.h | 294 |
1 files changed, 211 insertions, 83 deletions
@@ -93,7 +93,7 @@ extern "C" { /*------ Version ------*/ #define LZ4_VERSION_MAJOR 1 /* for breaking interface changes */ #define LZ4_VERSION_MINOR 8 /* for new (non-breaking) interface capabilities */ -#define LZ4_VERSION_RELEASE 1 /* for tweaks, bug-fixes, or development */ +#define LZ4_VERSION_RELEASE 2 /* for tweaks, bug-fixes, or development */ #define LZ4_VERSION_NUMBER (LZ4_VERSION_MAJOR *100*100 + LZ4_VERSION_MINOR *100 + LZ4_VERSION_RELEASE) @@ -102,8 +102,8 @@ extern "C" { #define LZ4_EXPAND_AND_QUOTE(str) LZ4_QUOTE(str) #define LZ4_VERSION_STRING LZ4_EXPAND_AND_QUOTE(LZ4_LIB_VERSION) -LZ4LIB_API int LZ4_versionNumber (void); /**< library version number; to be used when checking dll version */ -LZ4LIB_API const char* LZ4_versionString (void); /**< library version string; to be used when checking dll version */ +LZ4LIB_API int LZ4_versionNumber (void); /**< library version number; useful to check dll version */ +LZ4LIB_API const char* LZ4_versionString (void); /**< library version string; unseful to check dll version */ /*-************************************ @@ -113,7 +113,7 @@ LZ4LIB_API const char* LZ4_versionString (void); /**< library version string; * LZ4_MEMORY_USAGE : * Memory usage formula : N->2^N Bytes (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; etc.) * Increasing memory usage improves compression ratio - * Reduced memory usage can improve speed, due to cache effect + * Reduced memory usage may improve speed, thanks to cache effect * Default value is 14, for 16KB, which nicely fits into Intel x86 L1 cache */ #ifndef LZ4_MEMORY_USAGE @@ -128,12 +128,12 @@ LZ4LIB_API const char* LZ4_versionString (void); /**< library version string; into already allocated 'dst' buffer of size 'dstCapacity'. Compression is guaranteed to succeed if 'dstCapacity' >= LZ4_compressBound(srcSize). It also runs faster, so it's a recommended setting. - If the function cannot compress 'src' into a limited 'dst' budget, + If the function cannot compress 'src' into a more limited 'dst' budget, compression stops *immediately*, and the function result is zero. - As a consequence, 'dst' content is not valid. - This function never writes outside 'dst' buffer, nor read outside 'source' buffer. - srcSize : supported max value is LZ4_MAX_INPUT_VALUE - dstCapacity : full or partial size of buffer 'dst' (which must be already allocated) + Note : as a consequence, 'dst' content is not valid. + Note 2 : This function is protected against buffer overflow scenarios (never writes outside 'dst' buffer, nor read outside 'source' buffer). + srcSize : max supported value is LZ4_MAX_INPUT_SIZE. + dstCapacity : size of buffer 'dst' (which must be already allocated) return : the number of bytes written into buffer 'dst' (necessarily <= dstCapacity) or 0 if compression fails */ LZ4LIB_API int LZ4_compress_default(const char* src, char* dst, int srcSize, int dstCapacity); @@ -144,8 +144,7 @@ LZ4LIB_API int LZ4_compress_default(const char* src, char* dst, int srcSize, int return : the number of bytes decompressed into destination buffer (necessarily <= dstCapacity) If destination buffer is not large enough, decoding will stop and output an error code (negative value). If the source stream is detected malformed, the function will stop decoding and return a negative result. - This function is protected against buffer overflow exploits, including malicious data packets. - It never writes outside output buffer, nor reads outside input buffer. + This function is protected against malicious data packets. */ LZ4LIB_API int LZ4_decompress_safe (const char* src, char* dst, int compressedSize, int dstCapacity); @@ -161,20 +160,20 @@ LZ4_compressBound() : Provides the maximum size that LZ4 compression may output in a "worst case" scenario (input data not compressible) This function is primarily useful for memory allocation purposes (destination buffer size). Macro LZ4_COMPRESSBOUND() is also provided for compilation-time evaluation (stack memory allocation for example). - Note that LZ4_compress_default() compress faster when dest buffer size is >= LZ4_compressBound(srcSize) + Note that LZ4_compress_default() compresses faster when dstCapacity is >= LZ4_compressBound(srcSize) inputSize : max supported value is LZ4_MAX_INPUT_SIZE return : maximum output size in a "worst case" scenario - or 0, if input size is too large ( > LZ4_MAX_INPUT_SIZE) + or 0, if input size is incorrect (too large or negative) */ LZ4LIB_API int LZ4_compressBound(int inputSize); /*! LZ4_compress_fast() : - Same as LZ4_compress_default(), but allows to select an "acceleration" factor. + Same as LZ4_compress_default(), but allows selection of "acceleration" factor. The larger the acceleration value, the faster the algorithm, but also the lesser the compression. It's a trade-off. It can be fine tuned, with each successive value providing roughly +~3% to speed. An acceleration value of "1" is the same as regular LZ4_compress_default() - Values <= 0 will be replaced by ACCELERATION_DEFAULT (see lz4.c), which is 1. + Values <= 0 will be replaced by ACCELERATION_DEFAULT (currently == 1, see lz4.c). */ LZ4LIB_API int LZ4_compress_fast (const char* src, char* dst, int srcSize, int dstCapacity, int acceleration); @@ -205,15 +204,19 @@ LZ4LIB_API int LZ4_compress_destSize (const char* src, char* dst, int* srcSizePt /*! -LZ4_decompress_fast() : (unsafe!!) - originalSize : is the original uncompressed size - return : the number of bytes read from the source buffer (in other words, the compressed size) - If the source stream is detected malformed, the function will stop decoding and return a negative result. - Destination buffer must be already allocated. Its size must be >= 'originalSize' bytes. - note : This function respects memory boundaries for *properly formed* compressed data. - It is a bit faster than LZ4_decompress_safe(). - However, it does not provide any protection against intentionally modified data stream (malicious input). - Use this function in trusted environment only (data to decode comes from a trusted source). +LZ4_decompress_fast() : **unsafe!** +This function is a bit faster than LZ4_decompress_safe(), +but it may misbehave on malformed input because it doesn't perform full validation of compressed data. + originalSize : is the uncompressed size to regenerate + Destination buffer must be already allocated, and its size must be >= 'originalSize' bytes. + return : number of bytes read from source buffer (== compressed size). + If the source stream is detected malformed, the function stops decoding and return a negative result. + note : This function is only usable if the originalSize of uncompressed data is known in advance. + The caller should also check that all the compressed input has been consumed properly, + i.e. that the return value matches the size of the buffer with compressed input. + The function never writes past the output buffer. However, since it doesn't know its 'src' size, + it may read past the intended input. Also, because match offsets are not validated during decoding, + reads from 'src' may underflow. Use this function in trusted environment **only**. */ LZ4LIB_API int LZ4_decompress_fast (const char* src, char* dst, int originalSize); @@ -222,12 +225,12 @@ LZ4_decompress_safe_partial() : This function decompress a compressed block of size 'srcSize' at position 'src' into destination buffer 'dst' of size 'dstCapacity'. The function will decompress a minimum of 'targetOutputSize' bytes, and stop after that. - However, it's not accurate, and may write more than 'targetOutputSize' (but <= dstCapacity). + However, it's not accurate, and may write more than 'targetOutputSize' (but always <= dstCapacity). @return : the number of bytes decoded in the destination buffer (necessarily <= dstCapacity) - Note : this number can be < 'targetOutputSize' should the compressed block contain less data. - Always control how many bytes were decoded. - If the source stream is detected malformed, the function will stop decoding and return a negative result. - This function never writes outside of output buffer, and never reads outside of input buffer. It is therefore protected against malicious data packets. + Note : this number can also be < targetOutputSize, if compressed block contains less data. + Therefore, always control how many bytes were decoded. + If source stream is detected malformed, function returns a negative result. + This function is protected against malicious data packets. */ LZ4LIB_API int LZ4_decompress_safe_partial (const char* src, char* dst, int srcSize, int targetOutputSize, int dstCapacity); @@ -235,7 +238,7 @@ LZ4LIB_API int LZ4_decompress_safe_partial (const char* src, char* dst, int srcS /*-********************************************* * Streaming Compression Functions ***********************************************/ -typedef union LZ4_stream_u LZ4_stream_t; /* incomplete type (defined later) */ +typedef union LZ4_stream_u LZ4_stream_t; /* incomplete type (defined later) */ /*! LZ4_createStream() and LZ4_freeStream() : * LZ4_createStream() will allocate and initialize an `LZ4_stream_t` structure. @@ -259,67 +262,93 @@ LZ4LIB_API void LZ4_resetStream (LZ4_stream_t* streamPtr); LZ4LIB_API int LZ4_loadDict (LZ4_stream_t* streamPtr, const char* dictionary, int dictSize); /*! LZ4_compress_fast_continue() : - * Compress content into 'src' using data from previously compressed blocks, improving compression ratio. + * Compress 'src' content using data from previously compressed blocks, for better compression ratio. * 'dst' buffer must be already allocated. * If dstCapacity >= LZ4_compressBound(srcSize), compression is guaranteed to succeed, and runs faster. * - * Important : Up to 64KB of previously compressed data is assumed to remain present and unmodified in memory ! - * Special 1 : If input buffer is a double-buffer, it can have any size, including < 64 KB. - * Special 2 : If input buffer is a ring-buffer, it can have any size, including < 64 KB. + * Important : The previous 64KB of compressed data is assumed to remain present and unmodified in memory! + * + * Special 1 : When input is a double-buffer, they can have any size, including < 64 KB. + * Make sure that buffers are separated by at least one byte. + * This way, each block only depends on previous block. + * Special 2 : If input buffer is a ring-buffer, it can have any size, including < 64 KB. * * @return : size of compressed block - * or 0 if there is an error (typically, compressed data cannot fit into 'dst') + * or 0 if there is an error (typically, cannot fit into 'dst'). * After an error, the stream status is invalid, it can only be reset or freed. */ LZ4LIB_API int LZ4_compress_fast_continue (LZ4_stream_t* streamPtr, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration); /*! LZ4_saveDict() : - * If previously compressed data block is not guaranteed to remain available at its current memory location, + * If last 64KB data cannot be guaranteed to remain available at its current memory location, * save it into a safer place (char* safeBuffer). - * Note : it's not necessary to call LZ4_loadDict() after LZ4_saveDict(), dictionary is immediately usable. - * @return : saved dictionary size in bytes (necessarily <= dictSize), or 0 if error. + * This is schematically equivalent to a memcpy() followed by LZ4_loadDict(), + * but is much faster, because LZ4_saveDict() doesn't need to rebuild tables. + * @return : saved dictionary size in bytes (necessarily <= maxDictSize), or 0 if error. */ -LZ4LIB_API int LZ4_saveDict (LZ4_stream_t* streamPtr, char* safeBuffer, int dictSize); +LZ4LIB_API int LZ4_saveDict (LZ4_stream_t* streamPtr, char* safeBuffer, int maxDictSize); /*-********************************************** * Streaming Decompression Functions * Bufferless synchronous API ************************************************/ -typedef union LZ4_streamDecode_u LZ4_streamDecode_t; /* incomplete type (defined later) */ +typedef union LZ4_streamDecode_u LZ4_streamDecode_t; /* tracking context */ /*! LZ4_createStreamDecode() and LZ4_freeStreamDecode() : - * creation / destruction of streaming decompression tracking structure. - * A tracking structure can be re-used multiple times sequentially. */ + * creation / destruction of streaming decompression tracking context. + * A tracking context can be re-used multiple times. + */ LZ4LIB_API LZ4_streamDecode_t* LZ4_createStreamDecode(void); LZ4LIB_API int LZ4_freeStreamDecode (LZ4_streamDecode_t* LZ4_stream); /*! LZ4_setStreamDecode() : - * An LZ4_streamDecode_t structure can be allocated once and re-used multiple times. + * An LZ4_streamDecode_t context can be allocated once and re-used multiple times. * Use this function to start decompression of a new stream of blocks. - * A dictionary can optionnally be set. Use NULL or size 0 for a simple reset order. + * A dictionary can optionnally be set. Use NULL or size 0 for a reset order. + * Dictionary is presumed stable : it must remain accessible and unmodified during next decompression. * @return : 1 if OK, 0 if error */ LZ4LIB_API int LZ4_setStreamDecode (LZ4_streamDecode_t* LZ4_streamDecode, const char* dictionary, int dictSize); +/*! LZ4_decoderRingBufferSize() : v1.8.2 + * Note : in a ring buffer scenario (optional), + * blocks are presumed decompressed next to each other + * up to the moment there is not enough remaining space for next block (remainingSize < maxBlockSize), + * at which stage it resumes from beginning of ring buffer. + * When setting such a ring buffer for streaming decompression, + * provides the minimum size of this ring buffer + * to be compatible with any source respecting maxBlockSize condition. + * @return : minimum ring buffer size, + * or 0 if there is an error (invalid maxBlockSize). + */ +LZ4LIB_API int LZ4_decoderRingBufferSize(int maxBlockSize); +#define LZ4_DECODER_RING_BUFFER_SIZE(mbs) (65536 + 14 + (mbs)) /* for static allocation; mbs presumed valid */ + /*! LZ4_decompress_*_continue() : * These decoding functions allow decompression of consecutive blocks in "streaming" mode. * A block is an unsplittable entity, it must be presented entirely to a decompression function. - * Decompression functions only accept one block at a time. - * Previously decoded blocks *must* remain available at the memory position where they were decoded (up to 64 KB). + * Decompression functions only accepts one block at a time. + * The last 64KB of previously decoded data *must* remain available and unmodified at the memory position where they were decoded. + * If less than 64KB of data has been decoded, all the data must be present. * - * Special : if application sets a ring buffer for decompression, it must respect one of the following conditions : - * - Exactly same size as encoding buffer, with same update rule (block boundaries at same positions) - * In which case, the decoding & encoding ring buffer can have any size, including very small ones ( < 64 KB). - * - Larger than encoding buffer, by a minimum of maxBlockSize more bytes. - * maxBlockSize is implementation dependent. It's the maximum size of any single block. + * Special : if decompression side sets a ring buffer, it must respect one of the following conditions : + * - Decompression buffer size is _at least_ LZ4_decoderRingBufferSize(maxBlockSize). + * maxBlockSize is the maximum size of any single block. It can have any value > 16 bytes. + * In which case, encoding and decoding buffers do not need to be synchronized. + * Actually, data can be produced by any source compliant with LZ4 format specification, and respecting maxBlockSize. + * - Synchronized mode : + * Decompression buffer size is _exactly_ the same as compression buffer size, + * and follows exactly same update rule (block boundaries at same positions), + * and decoding function is provided with exact decompressed size of each block (exception for last block of the stream), + * _then_ decoding & encoding ring buffer can have any size, including small ones ( < 64 KB). + * - Decompression buffer is larger than encoding buffer, by a minimum of maxBlockSize more bytes. * In which case, encoding and decoding buffers do not need to be synchronized, * and encoding ring buffer can have any size, including small ones ( < 64 KB). - * - _At least_ 64 KB + 8 bytes + maxBlockSize. - * In which case, encoding and decoding buffers do not need to be synchronized, - * and encoding ring buffer can have any size, including larger than decoding buffer. - * Whenever these conditions are not possible, save the last 64KB of decoded data into a safe buffer, - * and indicate where it is saved using LZ4_setStreamDecode() before decompressing next block. + * + * Whenever these conditions are not possible, + * save the last 64KB of decoded data into a safe buffer where it can't be modified during decompression, + * then indicate where this data is saved using LZ4_setStreamDecode(), before decompressing next block. */ LZ4LIB_API int LZ4_decompress_safe_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int srcSize, int dstCapacity); LZ4LIB_API int LZ4_decompress_fast_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int originalSize); @@ -329,6 +358,7 @@ LZ4LIB_API int LZ4_decompress_fast_continue (LZ4_streamDecode_t* LZ4_streamDecod * These decoding functions work the same as * a combination of LZ4_setStreamDecode() followed by LZ4_decompress_*_continue() * They are stand-alone, and don't need an LZ4_streamDecode_t structure. + * Dictionary is presumed stable : it must remain accessible and unmodified during next decompression. */ LZ4LIB_API int LZ4_decompress_safe_usingDict (const char* src, char* dst, int srcSize, int dstCapcity, const char* dictStart, int dictSize); LZ4LIB_API int LZ4_decompress_fast_usingDict (const char* src, char* dst, int originalSize, const char* dictStart, int dictSize); @@ -337,6 +367,94 @@ LZ4LIB_API int LZ4_decompress_fast_usingDict (const char* src, char* dst, int or /*^********************************************** * !!!!!! STATIC LINKING ONLY !!!!!! ***********************************************/ + +/*-************************************ + * Unstable declarations + ************************************** + * Declarations in this section should be considered unstable. + * Use at your own peril, etc., etc. + * They may be removed in the future. + * Their signatures may change. + **************************************/ + +#ifdef LZ4_STATIC_LINKING_ONLY + +/*! LZ4_resetStream_fast() : + * Use this, like LZ4_resetStream(), to prepare a context for a new chain of + * calls to a streaming API (e.g., LZ4_compress_fast_continue()). + * + * Note: + * Using this in advance of a non- streaming-compression function is redundant, + * and potentially bad for performance, since they all perform their own custom + * reset internally. + * + * Differences from LZ4_resetStream(): + * When an LZ4_stream_t is known to be in a internally coherent state, + * it can often be prepared for a new compression with almost no work, only + * sometimes falling back to the full, expensive reset that is always required + * when the stream is in an indeterminate state (i.e., the reset performed by + * LZ4_resetStream()). + * + * LZ4_streams are guaranteed to be in a valid state when: + * - returned from LZ4_createStream() + * - reset by LZ4_resetStream() + * - memset(stream, 0, sizeof(LZ4_stream_t)), though this is discouraged + * - the stream was in a valid state and was reset by LZ4_resetStream_fast() + * - the stream was in a valid state and was then used in any compression call + * that returned success + * - the stream was in an indeterminate state and was used in a compression + * call that fully reset the state (e.g., LZ4_compress_fast_extState()) and + * that returned success + * + * When a stream isn't known to be in a valid state, it is not safe to pass to + * any fastReset or streaming function. It must first be cleansed by the full + * LZ4_resetStream(). + */ +LZ4LIB_API void LZ4_resetStream_fast (LZ4_stream_t* streamPtr); + +/*! LZ4_compress_fast_extState_fastReset() : + * A variant of LZ4_compress_fast_extState(). + * + * Using this variant avoids an expensive initialization step. It is only safe + * to call if the state buffer is known to be correctly initialized already + * (see above comment on LZ4_resetStream_fast() for a definition of "correctly + * initialized"). From a high level, the difference is that this function + * initializes the provided state with a call to something like + * LZ4_resetStream_fast() while LZ4_compress_fast_extState() starts with a + * call to LZ4_resetStream(). + */ +LZ4LIB_API int LZ4_compress_fast_extState_fastReset (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration); + +/*! LZ4_attach_dictionary() : + * This is an experimental API that allows for the efficient use of a + * static dictionary many times. + * + * Rather than re-loading the dictionary buffer into a working context before + * each compression, or copying a pre-loaded dictionary's LZ4_stream_t into a + * working LZ4_stream_t, this function introduces a no-copy setup mechanism, + * in which the working stream references the dictionary stream in-place. + * + * Several assumptions are made about the state of the dictionary stream. + * Currently, only streams which have been prepared by LZ4_loadDict() should + * be expected to work. + * + * Alternatively, the provided dictionary stream pointer may be NULL, in which + * case any existing dictionary stream is unset. + * + * If a dictionary is provided, it replaces any pre-existing stream history. + * The dictionary contents are the only history that can be referenced and + * logically immediately precede the data compressed in the first subsequent + * compression call. + * + * The dictionary will only remain attached to the working stream through the + * first compression call, at the end of which it is cleared. The dictionary + * stream (and source buffer) must remain in-place / accessible / unchanged + * through the completion of the first compression call on the stream. + */ +LZ4LIB_API void LZ4_attach_dictionary(LZ4_stream_t *working_stream, const LZ4_stream_t *dictionary_stream); + +#endif + /*-************************************ * Private definitions ************************************** @@ -351,14 +469,16 @@ LZ4LIB_API int LZ4_decompress_fast_usingDict (const char* src, char* dst, int or #if defined(__cplusplus) || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */) #include <stdint.h> -typedef struct { +typedef struct LZ4_stream_t_internal LZ4_stream_t_internal; +struct LZ4_stream_t_internal { uint32_t hashTable[LZ4_HASH_SIZE_U32]; uint32_t currentOffset; - uint32_t initCheck; + uint16_t initCheck; + uint16_t tableType; const uint8_t* dictionary; - uint8_t* bufferStart; /* obsolete, used for slideInputBuffer */ + const LZ4_stream_t_internal* dictCtx; uint32_t dictSize; -} LZ4_stream_t_internal; +}; typedef struct { const uint8_t* externalDict; @@ -369,14 +489,16 @@ typedef struct { #else -typedef struct { +typedef struct LZ4_stream_t_internal LZ4_stream_t_internal; +struct LZ4_stream_t_internal { unsigned int hashTable[LZ4_HASH_SIZE_U32]; unsigned int currentOffset; - unsigned int initCheck; + unsigned short initCheck; + unsigned short tableType; const unsigned char* dictionary; - unsigned char* bufferStart; /* obsolete, used for slideInputBuffer */ + const LZ4_stream_t_internal* dictCtx; unsigned int dictSize; -} LZ4_stream_t_internal; +}; typedef struct { const unsigned char* externalDict; @@ -433,11 +555,9 @@ union LZ4_streamDecode_u { # define LZ4_DEPRECATED(message) /* disable deprecation warnings */ #else # define LZ4_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__) -# if defined(__clang__) /* clang doesn't handle mixed C++11 and CNU attributes */ -# define LZ4_DEPRECATED(message) __attribute__((deprecated(message))) -# elif defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */ +# if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */ # define LZ4_DEPRECATED(message) [[deprecated(message)]] -# elif (LZ4_GCC_VERSION >= 405) +# elif (LZ4_GCC_VERSION >= 405) || defined(__clang__) # define LZ4_DEPRECATED(message) __attribute__((deprecated(message))) # elif (LZ4_GCC_VERSION >= 301) # define LZ4_DEPRECATED(message) __attribute__((deprecated)) @@ -450,26 +570,34 @@ union LZ4_streamDecode_u { #endif /* LZ4_DISABLE_DEPRECATE_WARNINGS */ /* Obsolete compression functions */ -LZ4LIB_API LZ4_DEPRECATED("use LZ4_compress_default() instead") int LZ4_compress (const char* source, char* dest, int sourceSize); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_compress_default() instead") int LZ4_compress_limitedOutput (const char* source, char* dest, int sourceSize, int maxOutputSize); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") int LZ4_compress_withState (void* state, const char* source, char* dest, int inputSize); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") int LZ4_compress_limitedOutput_withState (void* state, const char* source, char* dest, int inputSize, int maxOutputSize); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") int LZ4_compress_continue (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") int LZ4_compress_limitedOutput_continue (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize, int maxOutputSize); +LZ4_DEPRECATED("use LZ4_compress_default() instead") LZ4LIB_API int LZ4_compress (const char* source, char* dest, int sourceSize); +LZ4_DEPRECATED("use LZ4_compress_default() instead") LZ4LIB_API int LZ4_compress_limitedOutput (const char* source, char* dest, int sourceSize, int maxOutputSize); +LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_withState (void* state, const char* source, char* dest, int inputSize); +LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_limitedOutput_withState (void* state, const char* source, char* dest, int inputSize, int maxOutputSize); +LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_continue (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize); +LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_limitedOutput_continue (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize, int maxOutputSize); /* Obsolete decompression functions */ -LZ4LIB_API LZ4_DEPRECATED("use LZ4_decompress_fast() instead") int LZ4_uncompress (const char* source, char* dest, int outputSize); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_decompress_safe() instead") int LZ4_uncompress_unknownOutputSize (const char* source, char* dest, int isize, int maxOutputSize); +LZ4_DEPRECATED("use LZ4_decompress_fast() instead") LZ4LIB_API int LZ4_uncompress (const char* source, char* dest, int outputSize); +LZ4_DEPRECATED("use LZ4_decompress_safe() instead") LZ4LIB_API int LZ4_uncompress_unknownOutputSize (const char* source, char* dest, int isize, int maxOutputSize); -/* Obsolete streaming functions; use new streaming interface whenever possible */ -LZ4LIB_API LZ4_DEPRECATED("use LZ4_createStream() instead") void* LZ4_create (char* inputBuffer); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_createStream() instead") int LZ4_sizeofStreamState(void); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_resetStream() instead") int LZ4_resetStreamState(void* state, char* inputBuffer); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_saveDict() instead") char* LZ4_slideInputBuffer (void* state); +/* Obsolete streaming functions; degraded functionality; do not use! + * + * In order to perform streaming compression, these functions depended on data + * that is no longer tracked in the state. They have been preserved as well as + * possible: using them will still produce a correct output. However, they don't + * actually retain any history between compression calls. The compression ratio + * achieved will therefore be no better than compressing each chunk + * independently. + */ +LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API void* LZ4_create (char* inputBuffer); +LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API int LZ4_sizeofStreamState(void); +LZ4_DEPRECATED("Use LZ4_resetStream() instead") LZ4LIB_API int LZ4_resetStreamState(void* state, char* inputBuffer); +LZ4_DEPRECATED("Use LZ4_saveDict() instead") LZ4LIB_API char* LZ4_slideInputBuffer (void* state); /* Obsolete streaming decoding functions */ -LZ4LIB_API LZ4_DEPRECATED("use LZ4_decompress_safe_usingDict() instead") int LZ4_decompress_safe_withPrefix64k (const char* src, char* dst, int compressedSize, int maxDstSize); -LZ4LIB_API LZ4_DEPRECATED("use LZ4_decompress_fast_usingDict() instead") int LZ4_decompress_fast_withPrefix64k (const char* src, char* dst, int originalSize); +LZ4_DEPRECATED("use LZ4_decompress_safe_usingDict() instead") LZ4LIB_API int LZ4_decompress_safe_withPrefix64k (const char* src, char* dst, int compressedSize, int maxDstSize); +LZ4_DEPRECATED("use LZ4_decompress_fast_usingDict() instead") LZ4LIB_API int LZ4_decompress_fast_withPrefix64k (const char* src, char* dst, int originalSize); #endif /* LZ4_H_2983827168210 */ |