Rework to be many lines shorter

Also convert a few `ASCII's to `Unicode's
Also do some formatting fixes

1 files changed, 373 insertions, 649 deletions

diff --git a/doc/re_syntax.n b/doc/re_syntax.n
index 673e5b2..63c1405 100644
--- a/doc/re_syntax.n
+++ b/doc/re_syntax.n
@@ -1,3 +1,4 @@
+'\" -*- nroff -*-
 '\"
 '\" Copyright (c) 1998 Sun Microsystems, Inc.
 '\" Copyright (c) 1999 Scriptics Corporation
@@ -5,7 +6,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: re_syntax.n,v 1.4 2004/09/06 09:44:57 dkf Exp $
+'\" RCS: @(#) $Id: re_syntax.n,v 1.5 2004/10/31 16:01:54 dkf Exp $
 '\"
 .so man.macros
 .TH re_syntax n "8.1" Tcl "Tcl Built-In Commands"
@@ -18,7 +19,6 @@ re_syntax \- Syntax of Tcl regular expressions
 .PP
 A \fIregular expression\fR describes strings of characters.
 It's a pattern that matches certain strings and doesn't match others.
-
 .SH "DIFFERENT FLAVORS OF REs"
 Regular expressions (``RE''s), as defined by POSIX, come in two
 flavors: \fIextended\fR REs (``EREs'') and \fIbasic\fR REs (``BREs'').
@@ -31,7 +31,6 @@ This manual page primarily describes AREs.  BREs mostly exist for
 backward compatibility in some old programs; they will be discussed at
 the end.  POSIX EREs are almost an exact subset of AREs.  Features of
 AREs that are not present in EREs will be indicated.
-
 .SH "REGULAR EXPRESSION SYNTAX"
 .PP
 Tcl regular expressions are implemented using the package written by
@@ -78,71 +77,60 @@ a sequence of \fIm\fR through \fIn\fR (inclusive) matches of the atom;
 \fInon-greedy\fR quantifiers,
 which match the same possibilities,
 but prefer the smallest number rather than the largest number
-of matches (see MATCHING)
+of matches (see \fBMATCHING\fR)
 .RE
 .PP
-The forms using
-\fB{\fR and \fB}\fR
-are known as \fIbound\fRs.
-The numbers
-\fIm\fR and \fIn\fR are unsigned decimal integers
-with permissible values from 0 to 255 inclusive.
+The forms using \fB{\fR and \fB}\fR are known as \fIbound\fRs.  The
+numbers \fIm\fR and \fIn\fR are unsigned decimal integers with
+permissible values from 0 to 255 inclusive.
 .PP
 An atom is one of:
 .RS 2
 .TP 6
 \fB(\fIre\fB)\fR
-(where \fIre\fR is any regular expression)
-matches a match for
+(where \fIre\fR is any regular expression) matches a match for
 \fIre\fR, with the match noted for possible reporting
 .TP
 \fB(?:\fIre\fB)\fR
-as previous,
-but does no reporting
-(a ``non-capturing'' set of parentheses)
+as previous, but does no reporting (a ``non-capturing'' set of
+parentheses)
 .TP
 \fB()\fR
-matches an empty string,
-noted for possible reporting
+matches an empty string, noted for possible reporting
 .TP
 \fB(?:)\fR
-matches an empty string,
-without reporting
+matches an empty string, without reporting
 .TP
 \fB[\fIchars\fB]\fR
-a \fIbracket expression\fR,
-matching any one of the \fIchars\fR (see BRACKET EXPRESSIONS for more detail)
+a \fIbracket expression\fR, matching any one of the \fIchars\fR (see
+\fBBRACKET EXPRESSIONS\fR for more detail)
 .TP
- \fB.\fR
+\fB.\fR
 matches any single character
 .TP
 \fB\e\fIk\fR
-(where \fIk\fR is a non-alphanumeric character)
-matches that character taken as an ordinary character,
-e.g. \e\e matches a backslash character
+(where \fIk\fR is a non-alphanumeric character) matches that character
+taken as an ordinary character, e.g. \e\e matches a backslash
+character
 .TP
 \fB\e\fIc\fR
-where \fIc\fR is alphanumeric
-(possibly followed by other characters),
-an \fIescape\fR (AREs only),
-see ESCAPES below
+where \fIc\fR is alphanumeric (possibly followed by other characters),
+an \fIescape\fR (AREs only), see \fBESCAPES\fR below
 .TP
 \fB{\fR
-when followed by a character other than a digit,
-matches the left-brace character `\fB{\fR';
-when followed by a digit, it is the beginning of a
-\fIbound\fR (see above)
+when followed by a character other than a digit, matches the
+left-brace character `\fB{\fR'; when followed by a digit, it is the
+beginning of a \fIbound\fR (see above)
 .TP
 \fIx\fR
-where \fIx\fR is
-a single character with no other significance, matches that character.
+where \fIx\fR is a single character with no other significance,
+matches that character.
 .RE
 .PP
 A \fIconstraint\fR matches an empty string when specific conditions
-are met.
-A constraint may not be followed by a quantifier.
-The simple constraints are as follows; some more constraints are
-described later, under ESCAPES.
+are met.  A constraint may not be followed by a quantifier.  The
+simple constraints are as follows; some more constraints are described
+later, under \fBESCAPES\fR.
 .RS 2
 .TP 8
 \fB^\fR
@@ -152,196 +140,127 @@ matches at the beginning of a line
 matches at the end of a line
 .TP
 \fB(?=\fIre\fB)\fR
-\fIpositive lookahead\fR (AREs only), matches at any point
-where a substring matching \fIre\fR begins
+\fIpositive lookahead\fR (AREs only), matches at any point where a
+substring matching \fIre\fR begins
 .TP
 \fB(?!\fIre\fB)\fR
-\fInegative lookahead\fR (AREs only), matches at any point
-where no substring matching \fIre\fR begins
+\fInegative lookahead\fR (AREs only), matches at any point where no
+substring matching \fIre\fR begins
 .RE
 .PP
 The lookahead constraints may not contain back references (see later),
 and all parentheses within them are considered non-capturing.
 .PP
 An RE may not end with `\fB\e\fR'.
-
 .SH "BRACKET EXPRESSIONS"
-A \fIbracket expression\fR is a list of characters enclosed in `\fB[\|]\fR'.
-It normally matches any single character from the list (but see below).
-If the list begins with `\fB^\fR',
-it matches any single character
-(but see below) \fInot\fR from the rest of the list.
-.PP
-If two characters in the list are separated by `\fB\-\fR',
-this is shorthand
-for the full \fIrange\fR of characters between those two (inclusive) in the
-collating sequence,
-e.g.
-\fB[0\-9]\fR
-in ASCII matches any decimal digit.
-Two ranges may not share an
-endpoint, so e.g.
-\fBa\-c\-e\fR
-is illegal.
-Ranges are very collating-sequence-dependent,
-and portable programs should avoid relying on them.
-.PP
-To include a literal
-\fB]\fR
-or
-\fB\-\fR
-in the list,
-the simplest method is to
-enclose it in
-\fB[.\fR and \fB.]\fR
-to make it a collating element (see below).
-Alternatively,
-make it the first character
-(following a possible `\fB^\fR'),
-or (AREs only) precede it with `\fB\e\fR'.
-Alternatively, for `\fB\-\fR',
-make it the last character,
-or the second endpoint of a range.
-To use a literal
-\fB\-\fR
-as the first endpoint of a range,
-make it a collating element
-or (AREs only) precede it with `\fB\e\fR'.
-With the exception of these, some combinations using
-\fB[\fR
-(see next
-paragraphs), and escapes,
-all other special characters lose their
-special significance within a bracket expression.
-.PP
-Within a bracket expression, a collating element (a character,
-a multi-character sequence that collates as if it were a single character,
-or a collating-sequence name for either)
-enclosed in
-\fB[.\fR and \fB.]\fR
-stands for the
-sequence of characters of that collating element.
-The sequence is a single element of the bracket expression's list.
-A bracket expression in a locale that has
-multi-character collating elements
-can thus match more than one character.
-.VS 8.2
-So (insidiously), a bracket expression that starts with \fB^\fR
-can match multi-character collating elements even if none of them
-appear in the bracket expression!
-(\fINote:\fR Tcl currently has no multi-character collating elements.
-This information is only for illustration.)
+A \fIbracket expression\fR is a list of characters enclosed in
+`\fB[\|]\fR'.  It normally matches any single character from the list
+(but see below).  If the list begins with `\fB^\fR', it matches any
+single character (but see below) \fInot\fR from the rest of the list.
+.PP
+If two characters in the list are separated by `\fB\-\fR', this is
+shorthand for the full \fIrange\fR of characters between those two
+(inclusive) in the collating sequence, e.g. \fB[0\-9]\fR in Unicode
+matches any conventional decimal digit.  Two ranges may not share an
+endpoint, so e.g. \fBa\-c\-e\fR is illegal.  Ranges are very
+collating-sequence-dependent, and portable programs should avoid
+relying on them.
+.PP
+To include a literal \fB]\fR or \fB\-\fR in the list, the simplest
+method is to enclose it in \fB[.\fR and \fB.]\fR to make it a
+collating element (see below).  Alternatively, make it the first
+character (following a possible `\fB^\fR'), or (AREs only) precede it
+with `\fB\e\fR'.  Alternatively, for `\fB\-\fR', make it the last
+character, or the second endpoint of a range.  To use a literal
+\fB\-\fR as the first endpoint of a range, make it a collating element
+or (AREs only) precede it with `\fB\e\fR'.  With the exception of
+these, some combinations using \fB[\fR (see next paragraphs), and
+escapes, all other special characters lose their special significance
+within a bracket expression.
+.PP
+Within a bracket expression, a collating element (a character, a
+multi-character sequence that collates as if it were a single
+character, or a collating-sequence name for either) enclosed in
+\fB[.\fR and \fB.]\fR stands for the sequence of characters of that
+collating element.  The sequence is a single element of the bracket
+expression's list.  A bracket expression in a locale that has
+multi-character collating elements can thus match more than one
+character.  So (insidiously), a bracket expression that starts with
+\fB^\fR can match multi-character collating elements even if none of
+them appear in the bracket expression!  (\fINote:\fR Tcl currently has
+no multi-character collating elements.  This information is only for
+illustration.)
 .PP
 For example, assume the collating sequence includes a \fBch\fR
-multi-character collating element.
-Then the RE \fB[[.ch.]]*c\fR (zero or more \fBch\fP's followed by \fBc\fP)
-matches the first five characters of `\fBchchcc\fR'.
-Also, the RE \fB[^c]b\fR matches all of `\fBchb\fR'
-(because \fB[^c]\fR matches the multi-character \fBch\fR).
-.VE 8.2
-.PP
-Within a bracket expression, a collating element enclosed in
-\fB[=\fR
-and
-\fB=]\fR
-is an equivalence class, standing for the sequences of characters
-of all collating elements equivalent to that one, including itself.
-(If there are no other equivalent collating elements,
-the treatment is as if the enclosing delimiters were `\fB[.\fR'\&
-and `\fB.]\fR'.)
-For example, if
-\fBo\fR
-and
-\fB\o'o^'\fR
-are the members of an equivalence class,
-then `\fB[[=o=]]\fR', `\fB[[=\o'o^'=]]\fR',
-and `\fB[o\o'o^']\fR'\&
-are all synonymous.
-An equivalence class may not be an endpoint
-of a range.
-.VS 8.2
-(\fINote:\fR 
-Tcl currently implements only the Unicode locale.
-It doesn't define any equivalence classes.
+multi-character collating element.  Then the RE \fB[[.ch.]]*c\fR (zero
+or more \fBch\fP's followed by \fBc\fP) matches the first five
+characters of `\fBchchcc\fR'.  Also, the RE \fB[^c]b\fR matches all of
+`\fBchb\fR' (because \fB[^c]\fR matches the multi-character \fBch\fR).
+.PP
+Within a bracket expression, a collating element enclosed in \fB[=\fR
+and \fB=]\fR is an equivalence class, standing for the sequences of
+characters of all collating elements equivalent to that one, including
+itself.  (If there are no other equivalent collating elements, the
+treatment is as if the enclosing delimiters were `\fB[.\fR'\& and
+`\fB.]\fR'.)  For example, if \fBo\fR and \fB\o'o^'\fR are the members
+of an equivalence class, then `\fB[[=o=]]\fR', `\fB[[=\o'o^'=]]\fR',
+and `\fB[o\o'o^']\fR'\& are all synonymous.  An equivalence class may
+not be an endpoint of a range.  (\fINote:\fR Tcl currently implements
+only the Unicode locale.  It doesn't define any equivalence classes.
 The examples above are just illustrations.)
-.VE 8.2
-.PP
-Within a bracket expression, the name of a \fIcharacter class\fR enclosed
-in
-\fB[:\fR
-and
-\fB:]\fR
-stands for the list of all characters
-(not all collating elements!)
-belonging to that
-class.
-Standard character classes are:
 .PP
-.RS
-.ne 5
-.nf
-.ta 3c
-\fBalpha\fR	A letter. 
-\fBupper\fR	An upper-case letter. 
-\fBlower\fR	A lower-case letter. 
-\fBdigit\fR	A decimal digit. 
-\fBxdigit\fR	A hexadecimal digit. 
-\fBalnum\fR	An alphanumeric (letter or digit). 
-\fBprint\fR	An alphanumeric (same as alnum).
-\fBblank\fR	A space or tab character.
-\fBspace\fR	A character producing white space in displayed text. 
-\fBpunct\fR	A punctuation character. 
-\fBgraph\fR	A character with a visible representation. 
-\fBcntrl\fR	A control character. 
-.fi
-.RE
-.PP
-A locale may provide others.
-.VS 8.2
-(Note that the current Tcl implementation has only one locale:
-the Unicode locale.)
-.VE 8.2
-A character class may not be used as an endpoint of a range.
-.PP
-There are two special cases of bracket expressions:
-the bracket expressions
-\fB[[:<:]]\fR
-and
-\fB[[:>:]]\fR
-are constraints, matching empty strings at
-the beginning and end of a word respectively.
+Within a bracket expression, the name of a \fIcharacter class\fR
+enclosed in \fB[:\fR and \fB:]\fR stands for the list of all
+characters (not all collating elements!)  belonging to that class.
+Standard character classes are:
+.IP \fBalpha\fR 8
+A letter.
+.IP \fBupper\fR 8
+An upper-case letter.
+.IP \fBlower\fR 8
+A lower-case letter.
+.IP \fBdigit\fR 8
+A decimal digit.
+.IP \fBxdigit\fR 8
+A hexadecimal digit.
+.IP \fBalnum\fR 8
+An alphanumeric (letter or digit).
+.IP \fBprint\fR 8
+An alphanumeric (same as alnum).
+.IP \fBblank\fR 8
+A space or tab character.
+.IP \fBspace\fR 8
+A character producing white space in displayed text.
+.IP \fBpunct\fR 8
+A punctuation character.
+.IP \fBgraph\fR 8
+A character with a visible representation.
+.IP \fBcntrl\fR 8
+A control character.
+.PP
+A locale may provide others.  (Note that the current Tcl
+implementation has only one locale: the Unicode locale.)  A character
+class may not be used as an endpoint of a range.
+.PP
+There are two special cases of bracket expressions: the bracket
+expressions \fB[[:<:]]\fR and \fB[[:>:]]\fR are constraints, matching
+empty strings at the beginning and end of a word respectively.
 '\" note, discussion of escapes below references this definition of word
-A word is defined as a sequence of
-word characters
-that is neither preceded nor followed by
-word characters.
-A word character is an
-\fIalnum\fR
-character
-or an underscore
-(\fB_\fR).
-These special bracket expressions are deprecated;
-users of AREs should use constraint escapes instead (see below).
+A word is defined as a sequence of word characters that is neither
+preceded nor followed by word characters.  A word character is an
+\fIalnum\fR character or an underscore (\fB_\fR).  These special
+bracket expressions are deprecated; users of AREs should use
+constraint escapes instead (see below).
 .SH ESCAPES
-Escapes (AREs only), which begin with a
-\fB\e\fR
-followed by an alphanumeric character,
-come in several varieties:
-character entry, class shorthands, constraint escapes, and back references.
-A
-\fB\e\fR
-followed by an alphanumeric character but not constituting
-a valid escape is illegal in AREs.
-In EREs, there are no escapes:
-outside a bracket expression,
-a
-\fB\e\fR
-followed by an alphanumeric character merely stands for that
-character as an ordinary character,
-and inside a bracket expression,
-\fB\e\fR
-is an ordinary character.
-(The latter is the one actual incompatibility between EREs and AREs.)
+Escapes (AREs only), which begin with a \fB\e\fR followed by an
+alphanumeric character, come in several varieties: character entry,
+class shorthands, constraint escapes, and back references.  A \fB\e\fR
+followed by an alphanumeric character but not constituting a valid
+escape is illegal in AREs.  In EREs, there are no escapes: outside a
+bracket expression, a \fB\e\fR followed by an alphanumeric character
+merely stands for that character as an ordinary character, and inside
+a bracket expression, \fB\e\fR is an ordinary character.  (The latter
+is the one actual incompatibility between EREs and AREs.)
 .PP
 Character-entry escapes (AREs only) exist to make it easier to specify
 non-printing and otherwise inconvenient characters in REs:
@@ -354,21 +273,16 @@ alert (bell) character, as in C
 backspace, as in C
 .TP
 \fB\eB\fR
-synonym for
-\fB\e\fR
-to help reduce backslash doubling in some
+synonym for \fB\e\fR to help reduce backslash doubling in some
 applications where there are multiple levels of backslash processing
 .TP
 \fB\ec\fIX\fR
-(where X is any character) the character whose
-low-order 5 bits are the same as those of
-\fIX\fR,
-and whose other bits are all zero
+(where \fIX\fR is any character) the character whose low-order 5 bits
+are the same as those of \fIX\fR, and whose other bits are all zero
 .TP
 \fB\ee\fR
-the character whose collating-sequence name
-is `\fBESC\fR',
-or failing that, the character with octal value 033
+the character whose collating-sequence name is `\fBESC\fR', or failing
+that, the character with octal value 033
 .TP
 \fB\ef\fR
 formfeed, as in C
@@ -383,73 +297,48 @@ carriage return, as in C
 horizontal tab, as in C
 .TP
 \fB\eu\fIwxyz\fR
-(where
-\fIwxyz\fR
-is exactly four hexadecimal digits)
-the Unicode character
-\fBU+\fIwxyz\fR
-in the local byte ordering
+(where \fIwxyz\fR is exactly four hexadecimal digits) the Unicode
+character \fBU+\fIwxyz\fR in the local byte ordering
 .TP
 \fB\eU\fIstuvwxyz\fR
-(where
-\fIstuvwxyz\fR
-is exactly eight hexadecimal digits)
-reserved for a somewhat-hypothetical Unicode extension to 32 bits
+(where \fIstuvwxyz\fR is exactly eight hexadecimal digits) reserved
+for a somewhat-hypothetical Unicode extension to 32 bits
 .TP
 \fB\ev\fR
-vertical tab, as in C
-are all available.
+vertical tab, as in C are all available.
 .TP
 \fB\ex\fIhhh\fR
-(where
-\fIhhh\fR
-is any sequence of hexadecimal digits)
-the character whose hexadecimal value is
-\fB0x\fIhhh\fR
-(a single character no matter how many hexadecimal digits are used).
+(where \fIhhh\fR is any sequence of hexadecimal digits) the character
+whose hexadecimal value is \fB0x\fIhhh\fR (a single character no
+matter how many hexadecimal digits are used).
 .TP
 \fB\e0\fR
-the character whose value is
-\fB0\fR
+the character whose value is \fB0\fR
 .TP
 \fB\e\fIxy\fR
-(where
-\fIxy\fR
-is exactly two octal digits,
-and is not a
-\fIback reference\fR (see below))
-the character whose octal value is
+(where \fIxy\fR is exactly two octal digits, and is not a \fIback
+reference\fR (see below)) the character whose octal value is
 \fB0\fIxy\fR
 .TP
 \fB\e\fIxyz\fR
-(where
-\fIxyz\fR
-is exactly three octal digits,
-and is not a
-back reference (see below))
-the character whose octal value is
+(where \fIxyz\fR is exactly three octal digits, and is not a back
+reference (see below)) the character whose octal value is
 \fB0\fIxyz\fR
 .RE
 .PP
-Hexadecimal digits are `\fB0\fR'-`\fB9\fR', `\fBa\fR'-`\fBf\fR',
-and `\fBA\fR'-`\fBF\fR'.
-Octal digits are `\fB0\fR'-`\fB7\fR'.
+Hexadecimal digits are `\fB0\fR'-`\fB9\fR', `\fBa\fR'-`\fBf\fR', and
+`\fBA\fR'-`\fBF\fR'.  Octal digits are `\fB0\fR'-`\fB7\fR'.
 .PP
 The character-entry escapes are always taken as ordinary characters.
-For example,
-\fB\e135\fR
-is
-\fB]\fR
-in ASCII,
-but
-\fB\e135\fR
-does not terminate a bracket expression.
-Beware, however, that some applications (e.g., C compilers) interpret 
-such sequences themselves before the regular-expression package
-gets to see them, which may require doubling (quadrupling, etc.) the `\fB\e\fR'.
-.PP
-Class-shorthand escapes (AREs only) provide shorthands for certain commonly-used
-character classes:
+For example, \fB\e135\fR is \fB]\fR in Unicode, but \fB\e135\fR does
+not terminate a bracket expression.  Beware, however, that some
+applications (e.g., C compilers and the Tcl interpreter if the regular
+expression is not quoted with braces) interpret such sequences
+themselves before the regular-expression package gets to see them,
+which may require doubling (quadrupling, etc.) the `\fB\e\fR'.
+.PP
+Class-shorthand escapes (AREs only) provide shorthands for certain
+commonly-used character classes:
 .RS 2
 .TP 10
 \fB\ed\fR
@@ -459,8 +348,7 @@ character classes:
 \fB[[:space:]]\fR
 .TP
 \fB\ew\fR
-\fB[[:alnum:]_]\fR
-(note underscore)
+\fB[[:alnum:]_]\fR (note underscore)
 .TP
 \fB\eD\fR
 \fB[^[:digit:]]\fR
@@ -469,29 +357,22 @@ character classes:
 \fB[^[:space:]]\fR
 .TP
 \fB\eW\fR
-\fB[^[:alnum:]_]\fR
-(note underscore)
+\fB[^[:alnum:]_]\fR (note underscore)
 .RE
 .PP
-Within bracket expressions, `\fB\ed\fR', `\fB\es\fR',
-and `\fB\ew\fR'\&
-lose their outer brackets,
-and `\fB\eD\fR', `\fB\eS\fR',
-and `\fB\eW\fR'\&
-are illegal.
-.VS 8.2
-(So, for example, \fB[a-c\ed]\fR is equivalent to \fB[a-c[:digit:]]\fR.
-Also, \fB[a-c\eD]\fR, which is equivalent to \fB[a-c^[:digit:]]\fR, is illegal.)
-.VE 8.2
-.PP
-A constraint escape (AREs only) is a constraint,
-matching the empty string if specific conditions are met,
-written as an escape:
+Within bracket expressions, `\fB\ed\fR', `\fB\es\fR', and
+`\fB\ew\fR'\& lose their outer brackets, and `\fB\eD\fR', `\fB\eS\fR',
+and `\fB\eW\fR'\& are illegal.  (So, for example, \fB[a-c\ed]\fR is
+equivalent to \fB[a-c[:digit:]]\fR.  Also, \fB[a-c\eD]\fR, which is
+equivalent to \fB[a-c^[:digit:]]\fR, is illegal.)
+.PP
+A constraint escape (AREs only) is a constraint, matching the empty
+string if specific conditions are met, written as an escape:
 .RS 2
 .TP 6
 \fB\eA\fR
-matches only at the beginning of the string
-(see MATCHING, below, for how this differs from `\fB^\fR')
+matches only at the beginning of the string (see \fBMATCHING\fR,
+below, for how this differs from `\fB^\fR')
 .TP
 \fB\em\fR
 matches only at the beginning of a word
@@ -506,79 +387,54 @@ matches only at the beginning or end of a word
 matches only at a point that is not the beginning or end of a word
 .TP
 \fB\eZ\fR
-matches only at the end of the string
-(see MATCHING, below, for how this differs from `\fB$\fR')
+matches only at the end of the string (see \fBMATCHING\fR, below, for
+how this differs from `\fB$\fR')
 .TP
 \fB\e\fIm\fR
-(where
-\fIm\fR
-is a nonzero digit) a \fIback reference\fR, see below
+(where \fIm\fR is a nonzero digit) a \fIback reference\fR, see below
 .TP
 \fB\e\fImnn\fR
-(where
-\fIm\fR
-is a nonzero digit, and
-\fInn\fR
-is some more digits,
-and the decimal value
-\fImnn\fR
-is not greater than the number of closing capturing parentheses seen so far)
-a \fIback reference\fR, see below
+(where \fIm\fR is a nonzero digit, and \fInn\fR is some more digits,
+and the decimal value \fImnn\fR is not greater than the number of
+closing capturing parentheses seen so far) a \fIback reference\fR, see
+below
 .RE
 .PP
-A word is defined as in the specification of
-\fB[[:<:]]\fR
-and
-\fB[[:>:]]\fR
-above.
-Constraint escapes are illegal within bracket expressions.
-.PP
-A back reference (AREs only) matches the same string matched by the parenthesized
-subexpression specified by the number,
-so that (e.g.)
-\fB([bc])\e1\fR
-matches
-\fBbb\fR
-or
-\fBcc\fR
-but not `\fBbc\fR'.
-The subexpression must entirely precede the back reference in the RE.
+A word is defined as in the specification of \fB[[:<:]]\fR and
+\fB[[:>:]]\fR above.  Constraint escapes are illegal within bracket
+expressions.
+.PP
+A back reference (AREs only) matches the same string matched by the
+parenthesized subexpression specified by the number, so that (e.g.)
+\fB([bc])\e1\fR matches \fBbb\fR or \fBcc\fR but not `\fBbc\fR'.  The
+subexpression must entirely precede the back reference in the RE.
 Subexpressions are numbered in the order of their leading parentheses.
 Non-capturing parentheses do not define subexpressions.
 .PP
-There is an inherent historical ambiguity between octal character-entry 
-escapes and back references, which is resolved by heuristics,
-as hinted at above.
-A leading zero always indicates an octal escape.
-A single non-zero digit, not followed by another digit,
-is always taken as a back reference.
-A multi-digit sequence not starting with a zero is taken as a back 
-reference if it comes after a suitable subexpression
-(i.e. the number is in the legal range for a back reference),
-and otherwise is taken as octal.
+There is an inherent historical ambiguity between octal
+character-entry escapes and back references, which is resolved by
+heuristics, as hinted at above.  A leading zero always indicates an
+octal escape.  A single non-zero digit, not followed by another digit,
+is always taken as a back reference.  A multi-digit sequence not
+starting with a zero is taken as a back reference if it comes after a
+suitable subexpression (i.e. the number is in the legal range for a
+back reference), and otherwise is taken as octal.
 .SH "METASYNTAX"
 In addition to the main syntax described above, there are some special
 forms and miscellaneous syntactic facilities available.
 .PP
 Normally the flavor of RE being used is specified by
-application-dependent means.
-However, this can be overridden by a \fIdirector\fR.
-If an RE of any flavor begins with `\fB***:\fR',
-the rest of the RE is an ARE.
-If an RE of any flavor begins with `\fB***=\fR',
-the rest of the RE is taken to be a literal string,
-with all characters considered ordinary characters.
-.PP
-An ARE may begin with \fIembedded options\fR:
-a sequence
-\fB(?\fIxyz\fB)\fR
-(where
-\fIxyz\fR
-is one or more alphabetic characters)
-specifies options affecting the rest of the RE.
-These supplement, and can override,
-any options specified by the application.
-The available option letters are:
+application-dependent means.  However, this can be overridden by a
+\fIdirector\fR.  If an RE of any flavor begins with `\fB***:\fR', the
+rest of the RE is an ARE.  If an RE of any flavor begins with
+`\fB***=\fR', the rest of the RE is taken to be a literal string, with
+all characters considered ordinary characters.
+.PP
+An ARE may begin with \fIembedded options\fR: a sequence
+\fB(?\fIxyz\fB)\fR (where \fIxyz\fR is one or more alphabetic
+characters) specifies options affecting the rest of the RE.  These
+supplement, and can override, any options specified by the
+application.  The available option letters are:
 .RS 2
 .TP 3
 \fBb\fR
@@ -591,17 +447,16 @@ case-sensitive matching (usual default)
 rest of RE is an ERE
 .TP 3
 \fBi\fR
-case-insensitive matching (see MATCHING, below)
+case-insensitive matching (see \fBMATCHING\fR, below)
 .TP 3
 \fBm\fR
-historical synonym for
-\fBn\fR
+historical synonym for \fBn\fR
 .TP 3
 \fBn\fR
-newline-sensitive matching (see MATCHING, below)
+newline-sensitive matching (see \fBMATCHING\fR, below)
 .TP 3
 \fBp\fR
-partial newline-sensitive matching (see MATCHING, below)
+partial newline-sensitive matching (see \fBMATCHING\fR, below)
 .TP 3
 \fBq\fR
 rest of RE is a literal (``quoted'') string, all ordinary characters
@@ -613,317 +468,186 @@ non-newline-sensitive matching (usual default)
 tight syntax (usual default; see below)
 .TP 3
 \fBw\fR
-inverse partial newline-sensitive (``weird'') matching (see MATCHING, below)
+inverse partial newline-sensitive (``weird'') matching (see
+\fBMATCHING\fR, below)
 .TP 3
 \fBx\fR
 expanded syntax (see below)
 .RE
 .PP
-Embedded options take effect at the
-\fB)\fR
-terminating the sequence.
-They are available only at the start of an ARE,
-and may not be used later within it.
-.PP
-In addition to the usual (\fItight\fR) RE syntax, in which all characters are
-significant, there is an \fIexpanded\fR syntax,
-available in all flavors of RE
-with the \fB-expanded\fR switch, or in AREs with the embedded x option.
-In the expanded syntax,
-white-space characters are ignored
-and all characters between a
-\fB#\fR
-and the following newline (or the end of the RE) are ignored,
-permitting paragraphing and commenting a complex RE.
-There are three exceptions to that basic rule:
-.RS 2
-.PP
-a white-space character or `\fB#\fR' preceded by `\fB\e\fR' is retained
-.PP
+Embedded options take effect at the \fB)\fR terminating the sequence.
+They are available only at the start of an ARE, and may not be used
+later within it.
+.PP
+In addition to the usual (\fItight\fR) RE syntax, in which all
+characters are significant, there is an \fIexpanded\fR syntax,
+available in all flavors of RE with the \fB-expanded\fR switch, or in
+AREs with the embedded x option.  In the expanded syntax, white-space
+characters are ignored and all characters between a \fB#\fR and the
+following newline (or the end of the RE) are ignored, permitting
+paragraphing and commenting a complex RE.  There are three exceptions
+to that basic rule:
+.IP \(bu 3
+a white-space character or `\fB#\fR' preceded by `\fB\e\fR' is
+retained
+.IP \(bu 3
 white space or `\fB#\fR' within a bracket expression is retained
-.PP
+.IP \(bu 3
 white space and comments are illegal within multi-character symbols
 like the ARE `\fB(?:\fR' or the BRE `\fB\e(\fR'
-.RE
 .PP
 Expanded-syntax white-space characters are blank, tab, newline, and
-.VS 8.2
 any character that belongs to the \fIspace\fR character class.
-.VE 8.2
-.PP
-Finally, in an ARE,
-outside bracket expressions, the sequence `\fB(?#\fIttt\fB)\fR'
-(where
-\fIttt\fR
-is any text not containing a `\fB)\fR')
-is a comment,
-completely ignored.
-Again, this is not allowed between the characters of
-multi-character symbols like `\fB(?:\fR'.
-Such comments are more a historical artifact than a useful facility,
-and their use is deprecated;
-use the expanded syntax instead.
-.PP
-\fINone\fR of these metasyntax extensions is available if the application
-(or an initial
-\fB***=\fR
-director)
-has specified that the user's input be treated as a literal string
-rather than as an RE.
+.PP
+Finally, in an ARE, outside bracket expressions, the sequence
+`\fB(?#\fIttt\fB)\fR' (where \fIttt\fR is any text not containing a
+`\fB)\fR') is a comment, completely ignored.  Again, this is not
+allowed between the characters of multi-character symbols like
+`\fB(?:\fR'.  Such comments are more a historical artifact than a
+useful facility, and their use is deprecated; use the expanded syntax
+instead.
+.PP
+\fINone\fR of these metasyntax extensions is available if the
+application (or an initial \fB***=\fR director) has specified that the
+user's input be treated as a literal string rather than as an RE.
 .SH MATCHING
 In the event that an RE could match more than one substring of a given
-string,
-the RE matches the one starting earliest in the string.
-If the RE could match more than one substring starting at that point,
-its choice is determined by its \fIpreference\fR:
-either the longest substring, or the shortest.
-.PP
-Most atoms, and all constraints, have no preference.
-A parenthesized RE has the same preference (possibly none) as the RE.
-A quantified atom with quantifier
-\fB{\fIm\fB}\fR
-or
-\fB{\fIm\fB}?\fR
-has the same preference (possibly none) as the atom itself.
-A quantified atom with other normal quantifiers (including
-\fB{\fIm\fB,\fIn\fB}\fR
-with
-\fIm\fR
-equal to
-\fIn\fR)
-prefers longest match.
-A quantified atom with other non-greedy quantifiers (including
-\fB{\fIm\fB,\fIn\fB}?\fR
-with
-\fIm\fR
-equal to
-\fIn\fR)
-prefers shortest match.
-A branch has the same preference as the first quantified atom in it
-which has a preference.
-An RE consisting of two or more branches connected by the
-\fB|\fR
-operator prefers longest match.
-.PP
-Subject to the constraints imposed by the rules for matching the whole RE,
-subexpressions also match the longest or shortest possible substrings,
-based on their preferences,
-with subexpressions starting earlier in the RE taking priority over
-ones starting later.
-Note that outer subexpressions thus take priority over
-their component subexpressions.
-.PP
-Note that the quantifiers
-\fB{1,1}\fR
-and
-\fB{1,1}?\fR
-can be used to force longest and shortest preference, respectively,
-on a subexpression or a whole RE.
-.PP
-Match lengths are measured in characters, not collating elements.
-An empty string is considered longer than no match at all.
-For example,
-\fBbb*\fR
-matches the three middle characters of `\fBabbbc\fR',
-\fB(week|wee)(night|knights)\fR
-matches all ten characters of `\fBweeknights\fR',
-when
-\fB(.*).*\fR
-is matched against
-\fBabc\fR
-the parenthesized subexpression
-matches all three characters, and
-when
-\fB(a*)*\fR
-is matched against
-\fBbc\fR
-both the whole RE and the parenthesized
-subexpression match an empty string.
-.PP
-If case-independent matching is specified,
-the effect is much as if all case distinctions had vanished from the
-alphabet.
-When an alphabetic that exists in multiple cases appears as an
-ordinary character outside a bracket expression, it is effectively
-transformed into a bracket expression containing both cases,
-so that
-\fBx\fR
-becomes `\fB[xX]\fR'.
-When it appears inside a bracket expression, all case counterparts
-of it are added to the bracket expression, so that
-\fB[x]\fR
-becomes
-\fB[xX]\fR
-and
-\fB[^x]\fR
-becomes `\fB[^xX]\fR'.
-.PP
-If newline-sensitive matching is specified, \fB.\fR
-and bracket expressions using
-\fB^\fR
-will never match the newline character
-(so that matches will never cross newlines unless the RE
-explicitly arranges it)
-and
-\fB^\fR
-and
-\fB$\fR
-will match the empty string after and before a newline
-respectively, in addition to matching at beginning and end of string
-respectively.
-ARE
-\fB\eA\fR
-and
-\fB\eZ\fR
+string, the RE matches the one starting earliest in the string.  If
+the RE could match more than one substring starting at that point, its
+choice is determined by its \fIpreference\fR: either the longest
+substring, or the shortest.
+.PP
+Most atoms, and all constraints, have no preference.  A parenthesized
+RE has the same preference (possibly none) as the RE.  A quantified
+atom with quantifier \fB{\fIm\fB}\fR or \fB{\fIm\fB}?\fR has the same
+preference (possibly none) as the atom itself.  A quantified atom with
+other normal quantifiers (including \fB{\fIm\fB,\fIn\fB}\fR with
+\fIm\fR equal to \fIn\fR) prefers longest match.  A quantified atom
+with other non-greedy quantifiers (including \fB{\fIm\fB,\fIn\fB}?\fR
+with \fIm\fR equal to \fIn\fR) prefers shortest match.  A branch has
+the same preference as the first quantified atom in it which has a
+preference.  An RE consisting of two or more branches connected by the
+\fB|\fR operator prefers longest match.
+.PP
+Subject to the constraints imposed by the rules for matching the whole
+RE, subexpressions also match the longest or shortest possible
+substrings, based on their preferences, with subexpressions starting
+earlier in the RE taking priority over ones starting later.  Note that
+outer subexpressions thus take priority over their component
+subexpressions.
+.PP
+Note that the quantifiers \fB{1,1}\fR and \fB{1,1}?\fR can be used to
+force longest and shortest preference, respectively, on a
+subexpression or a whole RE.
+.PP
+Match lengths are measured in characters, not collating elements.  An
+empty string is considered longer than no match at all.  For example,
+\fBbb*\fR matches the three middle characters of `\fBabbbc\fR',
+\fB(week|wee)(night|knights)\fR matches all ten characters of
+`\fBweeknights\fR', when \fB(.*).*\fR is matched against \fBabc\fR the
+parenthesized subexpression matches all three characters, and when
+\fB(a*)*\fR is matched against \fBbc\fR both the whole RE and the
+parenthesized subexpression match an empty string.
+.PP
+If case-independent matching is specified, the effect is much as if
+all case distinctions had vanished from the alphabet.  When an
+alphabetic that exists in multiple cases appears as an ordinary
+character outside a bracket expression, it is effectively transformed
+into a bracket expression containing both cases, so that \fBx\fR
+becomes `\fB[xX]\fR'.  When it appears inside a bracket expression,
+all case counterparts of it are added to the bracket expression, so
+that \fB[x]\fR becomes \fB[xX]\fR and \fB[^x]\fR becomes
+`\fB[^xX]\fR'.
+.PP
+If newline-sensitive matching is specified, \fB.\fR and bracket
+expressions using \fB^\fR will never match the newline character (so
+that matches will never cross newlines unless the RE explicitly
+arranges it) and \fB^\fR and \fB$\fR will match the empty string after
+and before a newline respectively, in addition to matching at
+beginning and end of string respectively.  ARE \fB\eA\fR and \fB\eZ\fR
 continue to match beginning or end of string \fIonly\fR.
 .PP
-If partial newline-sensitive matching is specified,
-this affects \fB.\fR
-and bracket expressions
-as with newline-sensitive matching, but not
-\fB^\fR
-and `\fB$\fR'.
+If partial newline-sensitive matching is specified, this affects
+\fB.\fR and bracket expressions as with newline-sensitive matching,
+but not \fB^\fR and `\fB$\fR'.
 .PP
-If inverse partial newline-sensitive matching is specified,
-this affects
-\fB^\fR
-and
-\fB$\fR
-as with
-newline-sensitive matching,
-but not \fB.\fR
-and bracket expressions.
-This isn't very useful but is provided for symmetry.
+If inverse partial newline-sensitive matching is specified, this
+affects \fB^\fR and \fB$\fR as with newline-sensitive matching, but
+not \fB.\fR and bracket expressions.  This isn't very useful but is
+provided for symmetry.
 .SH "LIMITS AND COMPATIBILITY"
-No particular limit is imposed on the length of REs.
-Programs intended to be highly portable should not employ REs longer
-than 256 bytes,
-as a POSIX-compliant implementation can refuse to accept such REs.
-.PP
-The only feature of AREs that is actually incompatible with
-POSIX EREs is that
-\fB\e\fR
-does not lose its special
-significance inside bracket expressions.
-All other ARE features use syntax which is illegal or has
-undefined or unspecified effects in POSIX EREs;
-the
-\fB***\fR
-syntax of directors likewise is outside the POSIX
-syntax for both BREs and EREs.
-.PP
-Many of the ARE extensions are borrowed from Perl, but some have
-been changed to clean them up, and a few Perl extensions are not present.
-Incompatibilities of note include `\fB\eb\fR', `\fB\eB\fR',
-the lack of special treatment for a trailing newline,
-the addition of complemented bracket expressions to the things
-affected by newline-sensitive matching,
-the restrictions on parentheses and back references in lookahead constraints,
-and the longest/shortest-match (rather than first-match) matching semantics.
-.PP
-The matching rules for REs containing both normal and non-greedy quantifiers
-have changed since early beta-test versions of this package.
-(The new rules are much simpler and cleaner,
-but don't work as hard at guessing the user's real intentions.)
-.PP
-Henry Spencer's original 1986 \fIregexp\fR package,
-still in widespread use (e.g., in pre-8.1 releases of Tcl),
-implemented an early version of today's EREs.
-There are four incompatibilities between \fIregexp\fR's near-EREs
-(`RREs' for short) and AREs.
-In roughly increasing order of significance:
-.PP
-.RS
-In AREs,
-\fB\e\fR
-followed by an alphanumeric character is either an
-escape or an error,
-while in RREs, it was just another way of writing the 
-alphanumeric.
-This should not be a problem because there was no reason to write
-such a sequence in RREs.
-.PP
-\fB{\fR
-followed by a digit in an ARE is the beginning of a bound,
-while in RREs,
-\fB{\fR
-was always an ordinary character.
-Such sequences should be rare,
-and will often result in an error because following characters
-will not look like a valid bound.
-.PP
-In AREs,
-\fB\e\fR
-remains a special character within `\fB[\|]\fR',
-so a literal
-\fB\e\fR
-within
-\fB[\|]\fR
-must be written `\fB\e\e\fR'.
-\fB\e\e\fR
-also gives a literal
-\fB\e\fR
-within
-\fB[\|]\fR
-in RREs,
+No particular limit is imposed on the length of REs.  Programs
+intended to be highly portable should not employ REs longer than 256
+bytes, as a POSIX-compliant implementation can refuse to accept such
+REs.
+.PP
+The only feature of AREs that is actually incompatible with POSIX EREs
+is that \fB\e\fR does not lose its special significance inside bracket
+expressions.  All other ARE features use syntax which is illegal or
+has undefined or unspecified effects in POSIX EREs; the \fB***\fR
+syntax of directors likewise is outside the POSIX syntax for both BREs
+and EREs.
+.PP
+Many of the ARE extensions are borrowed from Perl, but some have been
+changed to clean them up, and a few Perl extensions are not present.
+Incompatibilities of note include `\fB\eb\fR', `\fB\eB\fR', the lack
+of special treatment for a trailing newline, the addition of
+complemented bracket expressions to the things affected by
+newline-sensitive matching, the restrictions on parentheses and back
+references in lookahead constraints, and the longest/shortest-match
+(rather than first-match) matching semantics.
+.PP
+The matching rules for REs containing both normal and non-greedy
+quantifiers have changed since early beta-test versions of this
+package.  (The new rules are much simpler and cleaner, but don't work
+as hard at guessing the user's real intentions.)
+.PP
+Henry Spencer's original 1986 \fIregexp\fR package, still in
+widespread use (e.g., in pre-8.1 releases of Tcl), implemented an
+early version of today's EREs.  There are four incompatibilities
+between \fIregexp\fR's near-EREs (`RREs' for short) and AREs.  In
+roughly increasing order of significance:
+.IP \(bu 3
+In AREs, \fB\e\fR followed by an alphanumeric character is either an
+escape or an error, while in RREs, it was just another way of writing
+the alphanumeric.  This should not be a problem because there was no
+reason to write such a sequence in RREs.
+.IP \(bu 3
+\fB{\fR followed by a digit in an ARE is the beginning of a bound,
+while in RREs, \fB{\fR was always an ordinary character.  Such
+sequences should be rare, and will often result in an error because
+following characters will not look like a valid bound.
+.IP \(bu 3
+In AREs, \fB\e\fR remains a special character within `\fB[\|]\fR', so
+a literal \fB\e\fR within \fB[\|]\fR must be written `\fB\e\e\fR'.
+\fB\e\e\fR also gives a literal \fB\e\fR within \fB[\|]\fR in RREs,
 but only truly paranoid programmers routinely doubled the backslash.
-.PP
-AREs report the longest/shortest match for the RE,
-rather than the first found in a specified search order.
-This may affect some RREs which were written in the expectation that
-the first match would be reported.
-(The careful crafting of RREs to optimize the search order for fast
-matching is obsolete (AREs examine all possible matches
-in parallel, and their performance is largely insensitive to their
-complexity) but cases where the search order was exploited to deliberately 
-find a match which was \fInot\fR the longest/shortest will need rewriting.)
-.RE
-
+.IP \(bu 3
+AREs report the longest/shortest match for the RE, rather than the
+first found in a specified search order.  This may affect some RREs
+which were written in the expectation that the first match would be
+reported.  (The careful crafting of RREs to optimize the search order
+for fast matching is obsolete (AREs examine all possible matches in
+parallel, and their performance is largely insensitive to their
+complexity) but cases where the search order was exploited to
+deliberately find a match which was \fInot\fR the longest/shortest
+will need rewriting.)
 .SH "BASIC REGULAR EXPRESSIONS"
-BREs differ from EREs in several respects.  `\fB|\fR', `\fB+\fR',
-and
-\fB?\fR
-are ordinary characters and there is no equivalent
-for their functionality.
-The delimiters for bounds are
-\fB\e{\fR
-and `\fB\e}\fR',
-with
-\fB{\fR
-and
-\fB}\fR
-by themselves ordinary characters.
-The parentheses for nested subexpressions are
-\fB\e(\fR
-and `\fB\e)\fR',
-with
-\fB(\fR
-and
-\fB)\fR
-by themselves ordinary characters.
-\fB^\fR
-is an ordinary character except at the beginning of the
-RE or the beginning of a parenthesized subexpression,
-\fB$\fR
-is an ordinary character except at the end of the
-RE or the end of a parenthesized subexpression,
-and
-\fB*\fR
-is an ordinary character if it appears at the beginning of the
-RE or the beginning of a parenthesized subexpression
-(after a possible leading `\fB^\fR').
-Finally,
-single-digit back references are available,
-and
-\fB\e<\fR
-and
-\fB\e>\fR
-are synonyms for
-\fB[[:<:]]\fR
-and
-\fB[[:>:]]\fR
-respectively;
-no other escapes are available.
+BREs differ from EREs in several respects.  `\fB|\fR', `\fB+\fR', and
+\fB?\fR are ordinary characters and there is no equivalent for their
+functionality.  The delimiters for bounds are \fB\e{\fR and
+`\fB\e}\fR', with \fB{\fR and \fB}\fR by themselves ordinary
+characters.  The parentheses for nested subexpressions are \fB\e(\fR
+and `\fB\e)\fR', with \fB(\fR and \fB)\fR by themselves ordinary
+characters.  \fB^\fR is an ordinary character except at the beginning
+of the RE or the beginning of a parenthesized subexpression, \fB$\fR
+is an ordinary character except at the end of the RE or the end of a
+parenthesized subexpression, and \fB*\fR is an ordinary character if
+it appears at the beginning of the RE or the beginning of a
+parenthesized subexpression (after a possible leading `\fB^\fR').
+Finally, single-digit back references are available, and \fB\e<\fR and
+\fB\e>\fR are synonyms for \fB[[:<:]]\fR and \fB[[:>:]]\fR
+respectively; no other escapes are available.
 
 .SH "SEE ALSO"
 RegExp(3), regexp(n), regsub(n), lsearch(n), switch(n), text(n)