Add previously omitted files so we have a complete zlib 1.2.3 distro...

12 files changed, 2925 insertions, 0 deletions

diff --git a/compat/zlib/contrib/ada/buffer_demo.adb b/compat/zlib/contrib/ada/buffer_demo.adb
new file mode 100644
index 0000000..3926e6f
--- /dev/null
+++ b/compat/zlib/contrib/ada/buffer_demo.adb
@@ -0,0 +1,106 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--
+--  $Id: buffer_demo.adb,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+--  This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
+--
+--  Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+--  of exactly the correct size is used for decompressed data, and the last
+--  few bytes passed in to Zlib are checksum bytes.
+
+--  This program compresses a string of text, and then decompresses the
+--  compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+   EOL  : Character renames ASCII.LF;
+   Text : constant String
+     := "Four score and seven years ago our fathers brought forth," & EOL &
+        "upon this continent, a new nation, conceived in liberty," & EOL &
+        "and dedicated to the proposition that `all men are created equal'.";
+
+   Source : Stream_Element_Array (1 .. Text'Length);
+   for Source'Address use Text'Address;
+
+begin
+   Ada.Text_IO.Put (Text);
+   Ada.Text_IO.New_Line;
+   Ada.Text_IO.Put_Line
+     ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+   declare
+      Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+      L               : Stream_Element_Offset;
+   begin
+      Compress : declare
+         Compressor : Filter_Type;
+         I : Stream_Element_Offset;
+      begin
+         Deflate_Init (Compressor);
+
+         --  Compress the whole of T at once.
+
+         Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+         pragma Assert (I = Source'Last);
+
+         Close (Compressor);
+
+         Ada.Text_IO.Put_Line
+           ("Compressed size :   "
+            & Stream_Element_Offset'Image (L) & " bytes");
+      end Compress;
+
+      --  Now we decompress the data, passing short blocks of data to Zlib
+      --  (because this demonstrates the problem - the last block passed will
+      --  contain checksum information and there will be no output, only a
+      --  check inside Zlib that the checksum is correct).
+
+      Decompress : declare
+         Decompressor : Filter_Type;
+
+         Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+         Block_Size : constant := 4;
+         --  This makes sure that the last block contains
+         --  only Adler checksum data.
+
+         P : Stream_Element_Offset := Compressed_Data'First - 1;
+         O : Stream_Element_Offset;
+      begin
+         Inflate_Init (Decompressor);
+
+         loop
+            Translate
+              (Decompressor,
+               Compressed_Data
+                 (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+               P,
+               Uncompressed_Data
+                 (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+               O,
+               No_Flush);
+
+               Ada.Text_IO.Put_Line
+                 ("Total in : " & Count'Image (Total_In (Decompressor)) &
+                  ", out : " & Count'Image (Total_Out (Decompressor)));
+
+               exit when P = L;
+         end loop;
+
+         Ada.Text_IO.New_Line;
+         Ada.Text_IO.Put_Line
+           ("Decompressed text matches original text : "
+             & Boolean'Image (Uncompressed_Data = Source));
+      end Decompress;
+   end;
+end Buffer_Demo;
diff --git a/compat/zlib/contrib/ada/mtest.adb b/compat/zlib/contrib/ada/mtest.adb
new file mode 100644
index 0000000..9caaf22
--- /dev/null
+++ b/compat/zlib/contrib/ada/mtest.adb
@@ -0,0 +1,156 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--  Continuous test for ZLib multithreading. If the test would fail
+--  we should provide thread safe allocation routines for the Z_Stream.
+--
+--  $Id: mtest.adb,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+with ZLib;
+with Ada.Streams;
+with Ada.Numerics.Discrete_Random;
+with Ada.Text_IO;
+with Ada.Exceptions;
+with Ada.Task_Identification;
+
+procedure MTest is
+   use Ada.Streams;
+   use ZLib;
+
+   Stop : Boolean := False;
+
+   pragma Atomic (Stop);
+
+   subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+   package Random_Elements is
+      new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+   task type Test_Task;
+
+   task body Test_Task is
+      Buffer : Stream_Element_Array (1 .. 100_000);
+      Gen : Random_Elements.Generator;
+
+      Buffer_First  : Stream_Element_Offset;
+      Compare_First : Stream_Element_Offset;
+
+      Deflate : Filter_Type;
+      Inflate : Filter_Type;
+
+      procedure Further (Item : in Stream_Element_Array);
+
+      procedure Read_Buffer
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+
+      -------------
+      -- Further --
+      -------------
+
+      procedure Further (Item : in Stream_Element_Array) is
+
+         procedure Compare (Item : in Stream_Element_Array);
+
+         -------------
+         -- Compare --
+         -------------
+
+         procedure Compare (Item : in Stream_Element_Array) is
+            Next_First : Stream_Element_Offset := Compare_First + Item'Length;
+         begin
+            if Buffer (Compare_First .. Next_First - 1) /= Item then
+               raise Program_Error;
+            end if;
+
+            Compare_First := Next_First;
+         end Compare;
+
+         procedure Compare_Write is new ZLib.Write (Write => Compare);
+      begin
+         Compare_Write (Inflate, Item, No_Flush);
+      end Further;
+
+      -----------------
+      -- Read_Buffer --
+      -----------------
+
+      procedure Read_Buffer
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset)
+      is
+         Buff_Diff   : Stream_Element_Offset := Buffer'Last - Buffer_First;
+         Next_First : Stream_Element_Offset;
+      begin
+         if Item'Length <= Buff_Diff then
+            Last := Item'Last;
+
+            Next_First := Buffer_First + Item'Length;
+
+            Item := Buffer (Buffer_First .. Next_First - 1);
+
+            Buffer_First := Next_First;
+         else
+            Last := Item'First + Buff_Diff;
+            Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last);
+            Buffer_First := Buffer'Last + 1;
+         end if;
+      end Read_Buffer;
+
+      procedure Translate is new Generic_Translate
+                                   (Data_In  => Read_Buffer,
+                                    Data_Out => Further);
+
+   begin
+      Random_Elements.Reset (Gen);
+
+      Buffer := (others => 20);
+
+      Main : loop
+         for J in Buffer'Range loop
+            Buffer (J) := Random_Elements.Random (Gen);
+
+            Deflate_Init (Deflate);
+            Inflate_Init (Inflate);
+
+            Buffer_First  := Buffer'First;
+            Compare_First := Buffer'First;
+
+            Translate (Deflate);
+
+            if Compare_First /= Buffer'Last + 1 then
+               raise Program_Error;
+            end if;
+
+            Ada.Text_IO.Put_Line
+              (Ada.Task_Identification.Image
+                 (Ada.Task_Identification.Current_Task)
+               & Stream_Element_Offset'Image (J)
+               & ZLib.Count'Image (Total_Out (Deflate)));
+
+            Close (Deflate);
+            Close (Inflate);
+
+            exit Main when Stop;
+         end loop;
+      end loop Main;
+   exception
+      when E : others =>
+         Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E));
+         Stop := True;
+   end Test_Task;
+
+   Test : array (1 .. 4) of Test_Task;
+
+   pragma Unreferenced (Test);
+
+   Dummy : Character;
+
+begin
+   Ada.Text_IO.Get_Immediate (Dummy);
+   Stop := True;
+end MTest;
diff --git a/compat/zlib/contrib/ada/read.adb b/compat/zlib/contrib/ada/read.adb
new file mode 100644
index 0000000..365d600
--- /dev/null
+++ b/compat/zlib/contrib/ada/read.adb
@@ -0,0 +1,156 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: read.adb,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+--  Test/demo program for the generic read interface.
+
+with Ada.Numerics.Discrete_Random;
+with Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib;
+
+procedure Read is
+
+   use Ada.Streams;
+
+   ------------------------------------
+   --  Test configuration parameters --
+   ------------------------------------
+
+   File_Size   : Stream_Element_Offset := 100_000;
+
+   Continuous  : constant Boolean          := False;
+   --  If this constant is True, the test would be repeated again and again,
+   --  with increment File_Size for every iteration.
+
+   Header      : constant ZLib.Header_Type := ZLib.Default;
+   --  Do not use Header other than Default in ZLib versions 1.1.4 and older.
+
+   Init_Random : constant := 8;
+   --  We are using the same random sequence, in case of we catch bug,
+   --  so we would be able to reproduce it.
+
+   -- End --
+
+   Pack_Size : Stream_Element_Offset;
+   Offset    : Stream_Element_Offset;
+
+   Filter     : ZLib.Filter_Type;
+
+   subtype Visible_Symbols
+      is Stream_Element range 16#20# .. 16#7E#;
+
+   package Random_Elements is new
+      Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+   Gen : Random_Elements.Generator;
+   Period  : constant Stream_Element_Offset := 200;
+   --  Period constant variable for random generator not to be very random.
+   --  Bigger period, harder random.
+
+   Read_Buffer : Stream_Element_Array (1 .. 2048);
+   Read_First  : Stream_Element_Offset;
+   Read_Last   : Stream_Element_Offset;
+
+   procedure Reset;
+
+   procedure Read
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Read
+   --  reading data from the File_In.
+
+   procedure Read is new ZLib.Read
+                           (Read,
+                            Read_Buffer,
+                            Rest_First => Read_First,
+                            Rest_Last  => Read_Last);
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset) is
+   begin
+      Last := Stream_Element_Offset'Min
+               (Item'Last,
+                Item'First + File_Size - Offset);
+
+      for J in Item'First .. Last loop
+         if J < Item'First + Period then
+            Item (J) := Random_Elements.Random (Gen);
+         else
+            Item (J) := Item (J - Period);
+         end if;
+
+         Offset   := Offset + 1;
+      end loop;
+   end Read;
+
+   -----------
+   -- Reset --
+   -----------
+
+   procedure Reset is
+   begin
+      Random_Elements.Reset (Gen, Init_Random);
+      Pack_Size := 0;
+      Offset := 1;
+      Read_First := Read_Buffer'Last + 1;
+      Read_Last  := Read_Buffer'Last;
+   end Reset;
+
+begin
+   Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+   loop
+      for Level in ZLib.Compression_Level'Range loop
+
+         Ada.Text_IO.Put ("Level ="
+            & ZLib.Compression_Level'Image (Level));
+
+         --  Deflate using generic instantiation.
+
+         ZLib.Deflate_Init
+               (Filter,
+                Level,
+                Header => Header);
+
+         Reset;
+
+         Ada.Text_IO.Put
+           (Stream_Element_Offset'Image (File_Size) & " ->");
+
+         loop
+            declare
+               Buffer : Stream_Element_Array (1 .. 1024);
+               Last   : Stream_Element_Offset;
+            begin
+               Read (Filter, Buffer, Last);
+
+               Pack_Size := Pack_Size + Last - Buffer'First + 1;
+
+               exit when Last < Buffer'Last;
+            end;
+         end loop;
+
+         Ada.Text_IO.Put_Line (Stream_Element_Offset'Image (Pack_Size));
+
+         ZLib.Close (Filter);
+      end loop;
+
+      exit when not Continuous;
+
+      File_Size := File_Size + 1;
+   end loop;
+end Read;
diff --git a/compat/zlib/contrib/ada/readme.txt b/compat/zlib/contrib/ada/readme.txt
new file mode 100644
index 0000000..ce4d2ca
--- /dev/null
+++ b/compat/zlib/contrib/ada/readme.txt
@@ -0,0 +1,65 @@
+                        ZLib for Ada thick binding (ZLib.Ada)
+                        Release 1.3
+
+ZLib.Ada is a thick binding interface to the popular ZLib data
+compression library, available at http://www.gzip.org/zlib/.
+It provides Ada-style access to the ZLib C library.
+
+
+        Here are the main changes since ZLib.Ada 1.2:
+
+- Attension: ZLib.Read generic routine have a initialization requirement
+  for Read_Last parameter now. It is a bit incompartible with previous version,
+  but extends functionality, we could use new parameters Allow_Read_Some and
+  Flush now.
+
+- Added Is_Open routines to ZLib and ZLib.Streams packages.
+
+- Add pragma Assert to check Stream_Element is 8 bit.
+
+- Fix extraction to buffer with exact known decompressed size. Error reported by
+  Steve Sangwine.
+
+- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits
+  computers. Patch provided by Pascal Obry.
+
+- Add Status_Error exception definition.
+
+- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.
+
+
+        How to build ZLib.Ada under GNAT
+
+You should have the ZLib library already build on your computer, before
+building ZLib.Ada. Make the directory of ZLib.Ada sources current and
+issue the command:
+
+  gnatmake test -largs -L<directory where libz.a is> -lz
+
+Or use the GNAT project file build for GNAT 3.15 or later:
+
+  gnatmake -Pzlib.gpr -L<directory where libz.a is>
+
+
+        How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2
+
+1. Make a project with all *.ads and *.adb files from the distribution.
+2. Build the libz.a library from the ZLib C sources.
+3. Rename libz.a to z.lib.
+4. Add the library z.lib to the project.
+5. Add the libc.lib library from the ObjectAda distribution to the project.
+6. Build the executable using test.adb as a main procedure.
+
+
+        How to use ZLib.Ada
+
+The source files test.adb and read.adb are small demo programs that show
+the main functionality of ZLib.Ada.
+
+The routines from the package specifications are commented.
+
+
+Homepage: http://zlib-ada.sourceforge.net/
+Author: Dmitriy Anisimkov <anisimkov@yahoo.com>
+
+Contributors: Pascal Obry <pascal@obry.org>, Steve Sangwine <sjs@essex.ac.uk>
diff --git a/compat/zlib/contrib/ada/test.adb b/compat/zlib/contrib/ada/test.adb
new file mode 100644
index 0000000..11a92d7
--- /dev/null
+++ b/compat/zlib/contrib/ada/test.adb
@@ -0,0 +1,463 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: test.adb,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+--  The program has a few aims.
+--  1. Test ZLib.Ada95 thick binding functionality.
+--  2. Show the example of use main functionality of the ZLib.Ada95 binding.
+--  3. Build this program automatically compile all ZLib.Ada95 packages under
+--     GNAT Ada95 compiler.
+
+with ZLib.Streams;
+with Ada.Streams.Stream_IO;
+with Ada.Numerics.Discrete_Random;
+
+with Ada.Text_IO;
+
+with Ada.Calendar;
+
+procedure Test is
+
+   use Ada.Streams;
+   use Stream_IO;
+
+   ------------------------------------
+   --  Test configuration parameters --
+   ------------------------------------
+
+   File_Size   : Count   := 100_000;
+   Continuous  : constant Boolean := False;
+
+   Header      : constant ZLib.Header_Type := ZLib.Default;
+                                              --  ZLib.None;
+                                              --  ZLib.Auto;
+                                              --  ZLib.GZip;
+   --  Do not use Header other then Default in ZLib versions 1.1.4
+   --  and older.
+
+   Strategy    : constant ZLib.Strategy_Type := ZLib.Default_Strategy;
+   Init_Random : constant := 10;
+
+   -- End --
+
+   In_File_Name  : constant String := "testzlib.in";
+   --  Name of the input file
+
+   Z_File_Name   : constant String := "testzlib.zlb";
+   --  Name of the compressed file.
+
+   Out_File_Name : constant String := "testzlib.out";
+   --  Name of the decompressed file.
+
+   File_In   : File_Type;
+   File_Out  : File_Type;
+   File_Back : File_Type;
+   File_Z    : ZLib.Streams.Stream_Type;
+
+   Filter : ZLib.Filter_Type;
+
+   Time_Stamp : Ada.Calendar.Time;
+
+   procedure Generate_File;
+   --  Generate file of spetsified size with some random data.
+   --  The random data is repeatable, for the good compression.
+
+   procedure Compare_Streams
+     (Left, Right : in out Root_Stream_Type'Class);
+   --  The procedure compearing data in 2 streams.
+   --  It is for compare data before and after compression/decompression.
+
+   procedure Compare_Files (Left, Right : String);
+   --  Compare files. Based on the Compare_Streams.
+
+   procedure Copy_Streams
+     (Source, Target : in out Root_Stream_Type'Class;
+      Buffer_Size    : in     Stream_Element_Offset := 1024);
+   --  Copying data from one stream to another. It is for test stream
+   --  interface of the library.
+
+   procedure Data_In
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Generic_Translate.
+   --  reading data from the File_In.
+
+   procedure Data_Out (Item : in Stream_Element_Array);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Generic_Translate.
+   --  writing data to the File_Out.
+
+   procedure Stamp;
+   --  Store the timestamp to the local variable.
+
+   procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count);
+   --  Print the time statistic with the message.
+
+   procedure Translate is new ZLib.Generic_Translate
+                                (Data_In  => Data_In,
+                                 Data_Out => Data_Out);
+   --  This procedure is moving data from File_In to File_Out
+   --  with compression or decompression, depend on initialization of
+   --  Filter parameter.
+
+   -------------------
+   -- Compare_Files --
+   -------------------
+
+   procedure Compare_Files (Left, Right : String) is
+      Left_File, Right_File : File_Type;
+   begin
+      Open (Left_File, In_File, Left);
+      Open (Right_File, In_File, Right);
+      Compare_Streams (Stream (Left_File).all, Stream (Right_File).all);
+      Close (Left_File);
+      Close (Right_File);
+   end Compare_Files;
+
+   ---------------------
+   -- Compare_Streams --
+   ---------------------
+
+   procedure Compare_Streams
+     (Left, Right : in out Ada.Streams.Root_Stream_Type'Class)
+   is
+      Left_Buffer, Right_Buffer : Stream_Element_Array (0 .. 16#FFF#);
+      Left_Last, Right_Last : Stream_Element_Offset;
+   begin
+      loop
+         Read (Left, Left_Buffer, Left_Last);
+         Read (Right, Right_Buffer, Right_Last);
+
+         if Left_Last /= Right_Last then
+            Ada.Text_IO.Put_Line ("Compare error :"
+              & Stream_Element_Offset'Image (Left_Last)
+              & " /= "
+              & Stream_Element_Offset'Image (Right_Last));
+
+            raise Constraint_Error;
+
+         elsif Left_Buffer (0 .. Left_Last)
+               /= Right_Buffer (0 .. Right_Last)
+         then
+            Ada.Text_IO.Put_Line ("ERROR: IN and OUT files is not equal.");
+            raise Constraint_Error;
+
+         end if;
+
+         exit when Left_Last < Left_Buffer'Last;
+      end loop;
+   end Compare_Streams;
+
+   ------------------
+   -- Copy_Streams --
+   ------------------
+
+   procedure Copy_Streams
+     (Source, Target : in out Ada.Streams.Root_Stream_Type'Class;
+      Buffer_Size    : in     Stream_Element_Offset := 1024)
+   is
+      Buffer : Stream_Element_Array (1 .. Buffer_Size);
+      Last   : Stream_Element_Offset;
+   begin
+      loop
+         Read  (Source, Buffer, Last);
+         Write (Target, Buffer (1 .. Last));
+
+         exit when Last < Buffer'Last;
+      end loop;
+   end Copy_Streams;
+
+   -------------
+   -- Data_In --
+   -------------
+
+   procedure Data_In
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset) is
+   begin
+      Read (File_In, Item, Last);
+   end Data_In;
+
+   --------------
+   -- Data_Out --
+   --------------
+
+   procedure Data_Out (Item : in Stream_Element_Array) is
+   begin
+      Write (File_Out, Item);
+   end Data_Out;
+
+   -------------------
+   -- Generate_File --
+   -------------------
+
+   procedure Generate_File is
+      subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+      package Random_Elements is
+         new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+      Gen    : Random_Elements.Generator;
+      Buffer : Stream_Element_Array := (1 .. 77 => 16#20#) & 10;
+
+      Buffer_Count : constant Count := File_Size / Buffer'Length;
+      --  Number of same buffers in the packet.
+
+      Density : constant Count := 30; --  from 0 to Buffer'Length - 2;
+
+      procedure Fill_Buffer (J, D : in Count);
+      --  Change the part of the buffer.
+
+      -----------------
+      -- Fill_Buffer --
+      -----------------
+
+      procedure Fill_Buffer (J, D : in Count) is
+      begin
+         for K in 0 .. D loop
+            Buffer
+              (Stream_Element_Offset ((J + K) mod (Buffer'Length - 1) + 1))
+             := Random_Elements.Random (Gen);
+
+         end loop;
+      end Fill_Buffer;
+
+   begin
+      Random_Elements.Reset (Gen, Init_Random);
+
+      Create (File_In, Out_File, In_File_Name);
+
+      Fill_Buffer (1, Buffer'Length - 2);
+
+      for J in 1 .. Buffer_Count loop
+         Write (File_In, Buffer);
+
+         Fill_Buffer (J, Density);
+      end loop;
+
+      --  fill remain size.
+
+      Write
+        (File_In,
+         Buffer
+           (1 .. Stream_Element_Offset
+                   (File_Size - Buffer'Length * Buffer_Count)));
+
+      Flush (File_In);
+      Close (File_In);
+   end Generate_File;
+
+   ---------------------
+   -- Print_Statistic --
+   ---------------------
+
+   procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count) is
+      use Ada.Calendar;
+      use Ada.Text_IO;
+
+      package Count_IO is new Integer_IO (ZLib.Count);
+
+      Curr_Dur : Duration := Clock - Time_Stamp;
+   begin
+      Put (Msg);
+
+      Set_Col (20);
+      Ada.Text_IO.Put ("size =");
+
+      Count_IO.Put
+        (Data_Size,
+         Width => Stream_IO.Count'Image (File_Size)'Length);
+
+      Put_Line (" duration =" & Duration'Image (Curr_Dur));
+   end Print_Statistic;
+
+   -----------
+   -- Stamp --
+   -----------
+
+   procedure Stamp is
+   begin
+      Time_Stamp := Ada.Calendar.Clock;
+   end Stamp;
+
+begin
+   Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+   loop
+      Generate_File;
+
+      for Level in ZLib.Compression_Level'Range loop
+
+         Ada.Text_IO.Put_Line ("Level ="
+            & ZLib.Compression_Level'Image (Level));
+
+         --  Test generic interface.
+         Open   (File_In, In_File, In_File_Name);
+         Create (File_Out, Out_File, Z_File_Name);
+
+         Stamp;
+
+         --  Deflate using generic instantiation.
+
+         ZLib.Deflate_Init
+               (Filter   => Filter,
+                Level    => Level,
+                Strategy => Strategy,
+                Header   => Header);
+
+         Translate (Filter);
+         Print_Statistic ("Generic compress", ZLib.Total_Out (Filter));
+         ZLib.Close (Filter);
+
+         Close (File_In);
+         Close (File_Out);
+
+         Open   (File_In, In_File, Z_File_Name);
+         Create (File_Out, Out_File, Out_File_Name);
+
+         Stamp;
+
+         --  Inflate using generic instantiation.
+
+         ZLib.Inflate_Init (Filter, Header => Header);
+
+         Translate (Filter);
+         Print_Statistic ("Generic decompress", ZLib.Total_Out (Filter));
+
+         ZLib.Close (Filter);
+
+         Close (File_In);
+         Close (File_Out);
+
+         Compare_Files (In_File_Name, Out_File_Name);
+
+         --  Test stream interface.
+
+         --  Compress to the back stream.
+
+         Open   (File_In, In_File, In_File_Name);
+         Create (File_Back, Out_File, Z_File_Name);
+
+         Stamp;
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.Out_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => True,
+            Level           => Level,
+            Strategy        => Strategy,
+            Header          => Header);
+
+         Copy_Streams
+           (Source => Stream (File_In).all,
+            Target => File_Z);
+
+         --  Flushing internal buffers to the back stream.
+
+         ZLib.Streams.Flush (File_Z, ZLib.Finish);
+
+         Print_Statistic ("Write compress",
+                          ZLib.Streams.Write_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+
+         Close (File_In);
+         Close (File_Back);
+
+         --  Compare reading from original file and from
+         --  decompression stream.
+
+         Open (File_In,   In_File, In_File_Name);
+         Open (File_Back, In_File, Z_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.In_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => True,
+            Header          => Header);
+
+         Stamp;
+         Compare_Streams (Stream (File_In).all, File_Z);
+
+         Print_Statistic ("Read decompress",
+                          ZLib.Streams.Read_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+         Close (File_In);
+         Close (File_Back);
+
+         --  Compress by reading from compression stream.
+
+         Open (File_Back, In_File, In_File_Name);
+         Create (File_Out, Out_File, Z_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.In_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => False,
+            Level           => Level,
+            Strategy        => Strategy,
+            Header          => Header);
+
+         Stamp;
+         Copy_Streams
+           (Source => File_Z,
+            Target => Stream (File_Out).all);
+
+         Print_Statistic ("Read compress",
+                          ZLib.Streams.Read_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+
+         Close (File_Out);
+         Close (File_Back);
+
+         --  Decompress to decompression stream.
+
+         Open   (File_In,   In_File, Z_File_Name);
+         Create (File_Back, Out_File, Out_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.Out_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => False,
+            Header          => Header);
+
+         Stamp;
+
+         Copy_Streams
+           (Source => Stream (File_In).all,
+            Target => File_Z);
+
+         Print_Statistic ("Write decompress",
+                          ZLib.Streams.Write_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+         Close (File_In);
+         Close (File_Back);
+
+         Compare_Files (In_File_Name, Out_File_Name);
+      end loop;
+
+      Ada.Text_IO.Put_Line (Count'Image (File_Size) & " Ok.");
+
+      exit when not Continuous;
+
+      File_Size := File_Size + 1;
+   end loop;
+end Test;
diff --git a/compat/zlib/contrib/ada/zlib-streams.adb b/compat/zlib/contrib/ada/zlib-streams.adb
new file mode 100644
index 0000000..e90ed11
--- /dev/null
+++ b/compat/zlib/contrib/ada/zlib-streams.adb
@@ -0,0 +1,225 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-streams.adb,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+with Ada.Unchecked_Deallocation;
+
+package body ZLib.Streams is
+
+   -----------
+   -- Close --
+   -----------
+
+   procedure Close (Stream : in out Stream_Type) is
+      procedure Free is new Ada.Unchecked_Deallocation
+         (Stream_Element_Array, Buffer_Access);
+   begin
+      if Stream.Mode = Out_Stream or Stream.Mode = Duplex then
+         --  We should flush the data written by the writer.
+
+         Flush (Stream, Finish);
+
+         Close (Stream.Writer);
+      end if;
+
+      if Stream.Mode = In_Stream or Stream.Mode = Duplex then
+         Close (Stream.Reader);
+         Free (Stream.Buffer);
+      end if;
+   end Close;
+
+   ------------
+   -- Create --
+   ------------
+
+   procedure Create
+     (Stream            :    out Stream_Type;
+      Mode              : in     Stream_Mode;
+      Back              : in     Stream_Access;
+      Back_Compressed   : in     Boolean;
+      Level             : in     Compression_Level := Default_Compression;
+      Strategy          : in     Strategy_Type     := Default_Strategy;
+      Header            : in     Header_Type       := Default;
+      Read_Buffer_Size  : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size;
+      Write_Buffer_Size : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size)
+   is
+
+      subtype Buffer_Subtype is Stream_Element_Array (1 .. Read_Buffer_Size);
+
+      procedure Init_Filter
+         (Filter   : in out Filter_Type;
+          Compress : in     Boolean);
+
+      -----------------
+      -- Init_Filter --
+      -----------------
+
+      procedure Init_Filter
+         (Filter   : in out Filter_Type;
+          Compress : in     Boolean) is
+      begin
+         if Compress then
+            Deflate_Init
+              (Filter, Level, Strategy, Header => Header);
+         else
+            Inflate_Init (Filter, Header => Header);
+         end if;
+      end Init_Filter;
+
+   begin
+      Stream.Back := Back;
+      Stream.Mode := Mode;
+
+      if Mode = Out_Stream or Mode = Duplex then
+         Init_Filter (Stream.Writer, Back_Compressed);
+         Stream.Buffer_Size := Write_Buffer_Size;
+      else
+         Stream.Buffer_Size := 0;
+      end if;
+
+      if Mode = In_Stream or Mode = Duplex then
+         Init_Filter (Stream.Reader, not Back_Compressed);
+
+         Stream.Buffer     := new Buffer_Subtype;
+         Stream.Rest_First := Stream.Buffer'Last + 1;
+         Stream.Rest_Last  := Stream.Buffer'Last;
+      end if;
+   end Create;
+
+   -----------
+   -- Flush --
+   -----------
+
+   procedure Flush
+     (Stream : in out Stream_Type;
+      Mode   : in     Flush_Mode := Sync_Flush)
+   is
+      Buffer : Stream_Element_Array (1 .. Stream.Buffer_Size);
+      Last   : Stream_Element_Offset;
+   begin
+      loop
+         Flush (Stream.Writer, Buffer, Last, Mode);
+
+         Ada.Streams.Write (Stream.Back.all, Buffer (1 .. Last));
+
+         exit when Last < Buffer'Last;
+      end loop;
+   end Flush;
+
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Stream : Stream_Type) return Boolean is
+   begin
+      return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer);
+   end Is_Open;
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Stream : in out Stream_Type;
+      Item   :    out Stream_Element_Array;
+      Last   :    out Stream_Element_Offset)
+   is
+
+      procedure Read
+        (Item : out Stream_Element_Array;
+         Last : out Stream_Element_Offset);
+
+      ----------
+      -- Read --
+      ----------
+
+      procedure Read
+        (Item : out Stream_Element_Array;
+         Last : out Stream_Element_Offset) is
+      begin
+         Ada.Streams.Read (Stream.Back.all, Item, Last);
+      end Read;
+
+      procedure Read is new ZLib.Read
+         (Read       => Read,
+          Buffer     => Stream.Buffer.all,
+          Rest_First => Stream.Rest_First,
+          Rest_Last  => Stream.Rest_Last);
+
+   begin
+      Read (Stream.Reader, Item, Last);
+   end Read;
+
+   -------------------
+   -- Read_Total_In --
+   -------------------
+
+   function Read_Total_In (Stream : in Stream_Type) return Count is
+   begin
+      return Total_In (Stream.Reader);
+   end Read_Total_In;
+
+   --------------------
+   -- Read_Total_Out --
+   --------------------
+
+   function Read_Total_Out (Stream : in Stream_Type) return Count is
+   begin
+      return Total_Out (Stream.Reader);
+   end Read_Total_Out;
+
+   -----------
+   -- Write --
+   -----------
+
+   procedure Write
+     (Stream : in out Stream_Type;
+      Item   : in     Stream_Element_Array)
+   is
+
+      procedure Write (Item : in Stream_Element_Array);
+
+      -----------
+      -- Write --
+      -----------
+
+      procedure Write (Item : in Stream_Element_Array) is
+      begin
+         Ada.Streams.Write (Stream.Back.all, Item);
+      end Write;
+
+      procedure Write is new ZLib.Write
+         (Write       => Write,
+          Buffer_Size => Stream.Buffer_Size);
+
+   begin
+      Write (Stream.Writer, Item, No_Flush);
+   end Write;
+
+   --------------------
+   -- Write_Total_In --
+   --------------------
+
+   function Write_Total_In (Stream : in Stream_Type) return Count is
+   begin
+      return Total_In (Stream.Writer);
+   end Write_Total_In;
+
+   ---------------------
+   -- Write_Total_Out --
+   ---------------------
+
+   function Write_Total_Out (Stream : in Stream_Type) return Count is
+   begin
+      return Total_Out (Stream.Writer);
+   end Write_Total_Out;
+
+end ZLib.Streams;
diff --git a/compat/zlib/contrib/ada/zlib-streams.ads b/compat/zlib/contrib/ada/zlib-streams.ads
new file mode 100644
index 0000000..aeb06b5
--- /dev/null
+++ b/compat/zlib/contrib/ada/zlib-streams.ads
@@ -0,0 +1,114 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-streams.ads,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+package ZLib.Streams is
+
+   type Stream_Mode is (In_Stream, Out_Stream, Duplex);
+
+   type Stream_Access is access all Ada.Streams.Root_Stream_Type'Class;
+
+   type Stream_Type is
+      new Ada.Streams.Root_Stream_Type with private;
+
+   procedure Read
+     (Stream : in out Stream_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset);
+
+   procedure Write
+     (Stream : in out Stream_Type;
+      Item   : in     Ada.Streams.Stream_Element_Array);
+
+   procedure Flush
+     (Stream : in out Stream_Type;
+      Mode   : in     Flush_Mode := Sync_Flush);
+   --  Flush the written data to the back stream,
+   --  all data placed to the compressor is flushing to the Back stream.
+   --  Should not be used untill necessary, becouse it is decreasing
+   --  compression.
+
+   function Read_Total_In (Stream : in Stream_Type) return Count;
+   pragma Inline (Read_Total_In);
+   --  Return total number of bytes read from back stream so far.
+
+   function Read_Total_Out (Stream : in Stream_Type) return Count;
+   pragma Inline (Read_Total_Out);
+   --  Return total number of bytes read so far.
+
+   function Write_Total_In (Stream : in Stream_Type) return Count;
+   pragma Inline (Write_Total_In);
+   --  Return total number of bytes written so far.
+
+   function Write_Total_Out (Stream : in Stream_Type) return Count;
+   pragma Inline (Write_Total_Out);
+   --  Return total number of bytes written to the back stream.
+
+   procedure Create
+     (Stream            :    out Stream_Type;
+      Mode              : in     Stream_Mode;
+      Back              : in     Stream_Access;
+      Back_Compressed   : in     Boolean;
+      Level             : in     Compression_Level := Default_Compression;
+      Strategy          : in     Strategy_Type     := Default_Strategy;
+      Header            : in     Header_Type       := Default;
+      Read_Buffer_Size  : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size;
+      Write_Buffer_Size : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size);
+   --  Create the Comression/Decompression stream.
+   --  If mode is In_Stream then Write operation is disabled.
+   --  If mode is Out_Stream then Read operation is disabled.
+
+   --  If Back_Compressed is true then
+   --  Data written to the Stream is compressing to the Back stream
+   --  and data read from the Stream is decompressed data from the Back stream.
+
+   --  If Back_Compressed is false then
+   --  Data written to the Stream is decompressing to the Back stream
+   --  and data read from the Stream is compressed data from the Back stream.
+
+   --  !!! When the Need_Header is False ZLib-Ada is using undocumented
+   --  ZLib 1.1.4 functionality to do not create/wait for ZLib headers.
+
+   function Is_Open (Stream : Stream_Type) return Boolean;
+
+   procedure Close (Stream : in out Stream_Type);
+
+private
+
+   use Ada.Streams;
+
+   type Buffer_Access is access all Stream_Element_Array;
+
+   type Stream_Type
+     is new Root_Stream_Type with
+   record
+      Mode       : Stream_Mode;
+
+      Buffer     : Buffer_Access;
+      Rest_First : Stream_Element_Offset;
+      Rest_Last  : Stream_Element_Offset;
+      --  Buffer for Read operation.
+      --  We need to have this buffer in the record
+      --  becouse not all read data from back stream
+      --  could be processed during the read operation.
+
+      Buffer_Size : Stream_Element_Offset;
+      --  Buffer size for write operation.
+      --  We do not need to have this buffer
+      --  in the record becouse all data could be
+      --  processed in the write operation.
+
+      Back       : Stream_Access;
+      Reader     : Filter_Type;
+      Writer     : Filter_Type;
+   end record;
+
+end ZLib.Streams;
diff --git a/compat/zlib/contrib/ada/zlib-thin.adb b/compat/zlib/contrib/ada/zlib-thin.adb
new file mode 100644
index 0000000..941f5d0
--- /dev/null
+++ b/compat/zlib/contrib/ada/zlib-thin.adb
@@ -0,0 +1,141 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-thin.adb,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+package body ZLib.Thin is
+
+   ZLIB_VERSION  : constant Chars_Ptr := zlibVersion;
+
+   Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit;
+
+   --------------
+   -- Avail_In --
+   --------------
+
+   function Avail_In (Strm : in Z_Stream) return UInt is
+   begin
+      return Strm.Avail_In;
+   end Avail_In;
+
+   ---------------
+   -- Avail_Out --
+   ---------------
+
+   function Avail_Out (Strm : in Z_Stream) return UInt is
+   begin
+      return Strm.Avail_Out;
+   end Avail_Out;
+
+   ------------------
+   -- Deflate_Init --
+   ------------------
+
+   function Deflate_Init
+     (strm       : Z_Streamp;
+      level      : Int;
+      method     : Int;
+      windowBits : Int;
+      memLevel   : Int;
+      strategy   : Int)
+      return       Int is
+   begin
+      return deflateInit2
+               (strm,
+                level,
+                method,
+                windowBits,
+                memLevel,
+                strategy,
+                ZLIB_VERSION,
+                Z_Stream_Size);
+   end Deflate_Init;
+
+   ------------------
+   -- Inflate_Init --
+   ------------------
+
+   function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is
+   begin
+      return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size);
+   end Inflate_Init;
+
+   ------------------------
+   -- Last_Error_Message --
+   ------------------------
+
+   function Last_Error_Message (Strm : in Z_Stream) return String is
+      use Interfaces.C.Strings;
+   begin
+      if Strm.msg = Null_Ptr then
+         return "";
+      else
+         return Value (Strm.msg);
+      end if;
+   end Last_Error_Message;
+
+   ------------
+   -- Set_In --
+   ------------
+
+   procedure Set_In
+     (Strm   : in out Z_Stream;
+      Buffer : in     Voidp;
+      Size   : in     UInt) is
+   begin
+      Strm.Next_In  := Buffer;
+      Strm.Avail_In := Size;
+   end Set_In;
+
+   ------------------
+   -- Set_Mem_Func --
+   ------------------
+
+   procedure Set_Mem_Func
+     (Strm   : in out Z_Stream;
+      Opaque : in     Voidp;
+      Alloc  : in     alloc_func;
+      Free   : in     free_func) is
+   begin
+      Strm.opaque := Opaque;
+      Strm.zalloc := Alloc;
+      Strm.zfree  := Free;
+   end Set_Mem_Func;
+
+   -------------
+   -- Set_Out --
+   -------------
+
+   procedure Set_Out
+     (Strm   : in out Z_Stream;
+      Buffer : in     Voidp;
+      Size   : in     UInt) is
+   begin
+      Strm.Next_Out  := Buffer;
+      Strm.Avail_Out := Size;
+   end Set_Out;
+
+   --------------
+   -- Total_In --
+   --------------
+
+   function Total_In (Strm : in Z_Stream) return ULong is
+   begin
+      return Strm.Total_In;
+   end Total_In;
+
+   ---------------
+   -- Total_Out --
+   ---------------
+
+   function Total_Out (Strm : in Z_Stream) return ULong is
+   begin
+      return Strm.Total_Out;
+   end Total_Out;
+
+end ZLib.Thin;
diff --git a/compat/zlib/contrib/ada/zlib-thin.ads b/compat/zlib/contrib/ada/zlib-thin.ads
new file mode 100644
index 0000000..b38fc7c
--- /dev/null
+++ b/compat/zlib/contrib/ada/zlib-thin.ads
@@ -0,0 +1,450 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-thin.ads,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+with Interfaces.C.Strings;
+
+with System;
+
+private package ZLib.Thin is
+
+   --  From zconf.h
+
+   MAX_MEM_LEVEL : constant := 9;         --  zconf.h:105
+                                          --  zconf.h:105
+   MAX_WBITS : constant := 15;      --  zconf.h:115
+                                    --  32K LZ77 window
+                                    --  zconf.h:115
+   SEEK_SET : constant := 8#0000#;  --  zconf.h:244
+                                    --  Seek from beginning of file.
+                                    --  zconf.h:244
+   SEEK_CUR : constant := 1;        --  zconf.h:245
+                                    --  Seek from current position.
+                                    --  zconf.h:245
+   SEEK_END : constant := 2;        --  zconf.h:246
+                                    --  Set file pointer to EOF plus "offset"
+                                    --  zconf.h:246
+
+   type Byte is new Interfaces.C.unsigned_char; --  8 bits
+                                                --  zconf.h:214
+   type UInt is new Interfaces.C.unsigned;      --  16 bits or more
+                                                --  zconf.h:216
+   type Int is new Interfaces.C.int;
+
+   type ULong is new Interfaces.C.unsigned_long;     --  32 bits or more
+                                                     --  zconf.h:217
+   subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr;
+
+   type ULong_Access is access ULong;
+   type Int_Access is access Int;
+
+   subtype Voidp is System.Address;            --  zconf.h:232
+
+   subtype Byte_Access is Voidp;
+
+   Nul : constant Voidp := System.Null_Address;
+   --  end from zconf
+
+   Z_NO_FLUSH : constant := 8#0000#;   --  zlib.h:125
+                                       --  zlib.h:125
+   Z_PARTIAL_FLUSH : constant := 1;       --  zlib.h:126
+                                          --  will be removed, use
+                                          --  Z_SYNC_FLUSH instead
+                                          --  zlib.h:126
+   Z_SYNC_FLUSH : constant := 2;       --  zlib.h:127
+                                       --  zlib.h:127
+   Z_FULL_FLUSH : constant := 3;       --  zlib.h:128
+                                       --  zlib.h:128
+   Z_FINISH : constant := 4;        --  zlib.h:129
+                                    --  zlib.h:129
+   Z_OK : constant := 8#0000#;   --  zlib.h:132
+                                 --  zlib.h:132
+   Z_STREAM_END : constant := 1;       --  zlib.h:133
+                                       --  zlib.h:133
+   Z_NEED_DICT : constant := 2;        --  zlib.h:134
+                                       --  zlib.h:134
+   Z_ERRNO : constant := -1;        --  zlib.h:135
+                                    --  zlib.h:135
+   Z_STREAM_ERROR : constant := -2;       --  zlib.h:136
+                                          --  zlib.h:136
+   Z_DATA_ERROR : constant := -3;      --  zlib.h:137
+                                       --  zlib.h:137
+   Z_MEM_ERROR : constant := -4;       --  zlib.h:138
+                                       --  zlib.h:138
+   Z_BUF_ERROR : constant := -5;       --  zlib.h:139
+                                       --  zlib.h:139
+   Z_VERSION_ERROR : constant := -6;      --  zlib.h:140
+                                          --  zlib.h:140
+   Z_NO_COMPRESSION : constant := 8#0000#;   --  zlib.h:145
+                                             --  zlib.h:145
+   Z_BEST_SPEED : constant := 1;       --  zlib.h:146
+                                       --  zlib.h:146
+   Z_BEST_COMPRESSION : constant := 9;       --  zlib.h:147
+                                             --  zlib.h:147
+   Z_DEFAULT_COMPRESSION : constant := -1;      --  zlib.h:148
+                                                --  zlib.h:148
+   Z_FILTERED : constant := 1;      --  zlib.h:151
+                                    --  zlib.h:151
+   Z_HUFFMAN_ONLY : constant := 2;        --  zlib.h:152
+                                          --  zlib.h:152
+   Z_DEFAULT_STRATEGY : constant := 8#0000#; --  zlib.h:153
+                                             --  zlib.h:153
+   Z_BINARY : constant := 8#0000#;  --  zlib.h:156
+                                    --  zlib.h:156
+   Z_ASCII : constant := 1;      --  zlib.h:157
+                                 --  zlib.h:157
+   Z_UNKNOWN : constant := 2;       --  zlib.h:158
+                                    --  zlib.h:158
+   Z_DEFLATED : constant := 8;      --  zlib.h:161
+                                    --  zlib.h:161
+   Z_NULL : constant := 8#0000#; --  zlib.h:164
+                                 --  for initializing zalloc, zfree, opaque
+                                 --  zlib.h:164
+   type gzFile is new Voidp;                  --  zlib.h:646
+
+   type Z_Stream is private;
+
+   type Z_Streamp is access all Z_Stream;     --  zlib.h:89
+
+   type alloc_func is access function
+     (Opaque : Voidp;
+      Items  : UInt;
+      Size   : UInt)
+      return Voidp; --  zlib.h:63
+
+   type free_func is access procedure (opaque : Voidp; address : Voidp);
+
+   function zlibVersion return Chars_Ptr;
+
+   function Deflate (strm : Z_Streamp; flush : Int) return Int;
+
+   function DeflateEnd (strm : Z_Streamp) return Int;
+
+   function Inflate (strm : Z_Streamp; flush : Int) return Int;
+
+   function InflateEnd (strm : Z_Streamp) return Int;
+
+   function deflateSetDictionary
+     (strm       : Z_Streamp;
+      dictionary : Byte_Access;
+      dictLength : UInt)
+      return       Int;
+
+   function deflateCopy (dest : Z_Streamp; source : Z_Streamp) return Int;
+   --  zlib.h:478
+
+   function deflateReset (strm : Z_Streamp) return Int; -- zlib.h:495
+
+   function deflateParams
+     (strm     : Z_Streamp;
+      level    : Int;
+      strategy : Int)
+      return     Int;       -- zlib.h:506
+
+   function inflateSetDictionary
+     (strm       : Z_Streamp;
+      dictionary : Byte_Access;
+      dictLength : UInt)
+      return       Int; --  zlib.h:548
+
+   function inflateSync (strm : Z_Streamp) return Int;  --  zlib.h:565
+
+   function inflateReset (strm : Z_Streamp) return Int; --  zlib.h:580
+
+   function compress
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong)
+      return      Int;           -- zlib.h:601
+
+   function compress2
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong;
+      level     : Int)
+      return      Int;          -- zlib.h:615
+
+   function uncompress
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong)
+      return      Int;
+
+   function gzopen (path : Chars_Ptr; mode : Chars_Ptr) return gzFile;
+
+   function gzdopen (fd : Int; mode : Chars_Ptr) return gzFile;
+
+   function gzsetparams
+     (file     : gzFile;
+      level    : Int;
+      strategy : Int)
+      return     Int;
+
+   function gzread
+     (file : gzFile;
+      buf  : Voidp;
+      len  : UInt)
+      return Int;
+
+   function gzwrite
+     (file : in gzFile;
+      buf  : in Voidp;
+      len  : in UInt)
+      return Int;
+
+   function gzprintf (file : in gzFile; format : in Chars_Ptr) return Int;
+
+   function gzputs (file : in gzFile; s : in Chars_Ptr) return Int;
+
+   function gzgets
+     (file : gzFile;
+      buf  : Chars_Ptr;
+      len  : Int)
+      return Chars_Ptr;
+
+   function gzputc (file : gzFile; char : Int) return Int;
+
+   function gzgetc (file : gzFile) return Int;
+
+   function gzflush (file : gzFile; flush : Int) return Int;
+
+   function gzseek
+     (file   : gzFile;
+      offset : Int;
+      whence : Int)
+      return   Int;
+
+   function gzrewind (file : gzFile) return Int;
+
+   function gztell (file : gzFile) return Int;
+
+   function gzeof (file : gzFile) return Int;
+
+   function gzclose (file : gzFile) return Int;
+
+   function gzerror (file : gzFile; errnum : Int_Access) return Chars_Ptr;
+
+   function adler32
+     (adler : ULong;
+      buf   : Byte_Access;
+      len   : UInt)
+      return  ULong;
+
+   function crc32
+     (crc  : ULong;
+      buf  : Byte_Access;
+      len  : UInt)
+      return ULong;
+
+   function deflateInit
+     (strm        : Z_Streamp;
+      level       : Int;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function deflateInit2
+     (strm        : Z_Streamp;
+      level       : Int;
+      method      : Int;
+      windowBits  : Int;
+      memLevel    : Int;
+      strategy    : Int;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function Deflate_Init
+     (strm       : Z_Streamp;
+      level      : Int;
+      method     : Int;
+      windowBits : Int;
+      memLevel   : Int;
+      strategy   : Int)
+      return       Int;
+   pragma Inline (Deflate_Init);
+
+   function inflateInit
+     (strm        : Z_Streamp;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function inflateInit2
+     (strm        : in Z_Streamp;
+      windowBits  : in Int;
+      version     : in Chars_Ptr;
+      stream_size : in Int)
+      return      Int;
+
+   function inflateBackInit
+     (strm        : in Z_Streamp;
+      windowBits  : in Int;
+      window      : in Byte_Access;
+      version     : in Chars_Ptr;
+      stream_size : in Int)
+      return      Int;
+   --  Size of window have to be 2**windowBits.
+
+   function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int;
+   pragma Inline (Inflate_Init);
+
+   function zError (err : Int) return Chars_Ptr;
+
+   function inflateSyncPoint (z : Z_Streamp) return Int;
+
+   function get_crc_table return ULong_Access;
+
+   --  Interface to the available fields of the z_stream structure.
+   --  The application must update next_in and avail_in when avail_in has
+   --  dropped to zero. It must update next_out and avail_out when avail_out
+   --  has dropped to zero. The application must initialize zalloc, zfree and
+   --  opaque before calling the init function.
+
+   procedure Set_In
+     (Strm   : in out Z_Stream;
+      Buffer : in Voidp;
+      Size   : in UInt);
+   pragma Inline (Set_In);
+
+   procedure Set_Out
+     (Strm   : in out Z_Stream;
+      Buffer : in Voidp;
+      Size   : in UInt);
+   pragma Inline (Set_Out);
+
+   procedure Set_Mem_Func
+     (Strm   : in out Z_Stream;
+      Opaque : in Voidp;
+      Alloc  : in alloc_func;
+      Free   : in free_func);
+   pragma Inline (Set_Mem_Func);
+
+   function Last_Error_Message (Strm : in Z_Stream) return String;
+   pragma Inline (Last_Error_Message);
+
+   function Avail_Out (Strm : in Z_Stream) return UInt;
+   pragma Inline (Avail_Out);
+
+   function Avail_In (Strm : in Z_Stream) return UInt;
+   pragma Inline (Avail_In);
+
+   function Total_In (Strm : in Z_Stream) return ULong;
+   pragma Inline (Total_In);
+
+   function Total_Out (Strm : in Z_Stream) return ULong;
+   pragma Inline (Total_Out);
+
+   function inflateCopy
+     (dest   : in Z_Streamp;
+      Source : in Z_Streamp)
+      return Int;
+
+   function compressBound (Source_Len : in ULong) return ULong;
+
+   function deflateBound
+     (Strm       : in Z_Streamp;
+      Source_Len : in ULong)
+      return     ULong;
+
+   function gzungetc (C : in Int; File : in  gzFile) return Int;
+
+   function zlibCompileFlags return ULong;
+
+private
+
+   type Z_Stream is record            -- zlib.h:68
+      Next_In   : Voidp      := Nul;  -- next input byte
+      Avail_In  : UInt       := 0;    -- number of bytes available at next_in
+      Total_In  : ULong      := 0;    -- total nb of input bytes read so far
+      Next_Out  : Voidp      := Nul;  -- next output byte should be put there
+      Avail_Out : UInt       := 0;    -- remaining free space at next_out
+      Total_Out : ULong      := 0;    -- total nb of bytes output so far
+      msg       : Chars_Ptr;          -- last error message, NULL if no error
+      state     : Voidp;              -- not visible by applications
+      zalloc    : alloc_func := null; -- used to allocate the internal state
+      zfree     : free_func  := null; -- used to free the internal state
+      opaque    : Voidp;              -- private data object passed to
+                                      --  zalloc and zfree
+      data_type : Int;                -- best guess about the data type:
+                                      --  ascii or binary
+      adler     : ULong;              -- adler32 value of the uncompressed
+                                      --  data
+      reserved  : ULong;              -- reserved for future use
+   end record;
+
+   pragma Convention (C, Z_Stream);
+
+   pragma Import (C, zlibVersion, "zlibVersion");
+   pragma Import (C, Deflate, "deflate");
+   pragma Import (C, DeflateEnd, "deflateEnd");
+   pragma Import (C, Inflate, "inflate");
+   pragma Import (C, InflateEnd, "inflateEnd");
+   pragma Import (C, deflateSetDictionary, "deflateSetDictionary");
+   pragma Import (C, deflateCopy, "deflateCopy");
+   pragma Import (C, deflateReset, "deflateReset");
+   pragma Import (C, deflateParams, "deflateParams");
+   pragma Import (C, inflateSetDictionary, "inflateSetDictionary");
+   pragma Import (C, inflateSync, "inflateSync");
+   pragma Import (C, inflateReset, "inflateReset");
+   pragma Import (C, compress, "compress");
+   pragma Import (C, compress2, "compress2");
+   pragma Import (C, uncompress, "uncompress");
+   pragma Import (C, gzopen, "gzopen");
+   pragma Import (C, gzdopen, "gzdopen");
+   pragma Import (C, gzsetparams, "gzsetparams");
+   pragma Import (C, gzread, "gzread");
+   pragma Import (C, gzwrite, "gzwrite");
+   pragma Import (C, gzprintf, "gzprintf");
+   pragma Import (C, gzputs, "gzputs");
+   pragma Import (C, gzgets, "gzgets");
+   pragma Import (C, gzputc, "gzputc");
+   pragma Import (C, gzgetc, "gzgetc");
+   pragma Import (C, gzflush, "gzflush");
+   pragma Import (C, gzseek, "gzseek");
+   pragma Import (C, gzrewind, "gzrewind");
+   pragma Import (C, gztell, "gztell");
+   pragma Import (C, gzeof, "gzeof");
+   pragma Import (C, gzclose, "gzclose");
+   pragma Import (C, gzerror, "gzerror");
+   pragma Import (C, adler32, "adler32");
+   pragma Import (C, crc32, "crc32");
+   pragma Import (C, deflateInit, "deflateInit_");
+   pragma Import (C, inflateInit, "inflateInit_");
+   pragma Import (C, deflateInit2, "deflateInit2_");
+   pragma Import (C, inflateInit2, "inflateInit2_");
+   pragma Import (C, zError, "zError");
+   pragma Import (C, inflateSyncPoint, "inflateSyncPoint");
+   pragma Import (C, get_crc_table, "get_crc_table");
+
+   --  since zlib 1.2.0:
+
+   pragma Import (C, inflateCopy, "inflateCopy");
+   pragma Import (C, compressBound, "compressBound");
+   pragma Import (C, deflateBound, "deflateBound");
+   pragma Import (C, gzungetc, "gzungetc");
+   pragma Import (C, zlibCompileFlags, "zlibCompileFlags");
+
+   pragma Import (C, inflateBackInit, "inflateBackInit_");
+
+   --  I stopped binding the inflateBack routines, becouse realize that
+   --  it does not support zlib and gzip headers for now, and have no
+   --  symmetric deflateBack routines.
+   --  ZLib-Ada is symmetric regarding deflate/inflate data transformation
+   --  and has a similar generic callback interface for the
+   --  deflate/inflate transformation based on the regular Deflate/Inflate
+   --  routines.
+
+   --  pragma Import (C, inflateBack, "inflateBack");
+   --  pragma Import (C, inflateBackEnd, "inflateBackEnd");
+
+end ZLib.Thin;
diff --git a/compat/zlib/contrib/ada/zlib.adb b/compat/zlib/contrib/ada/zlib.adb
new file mode 100644
index 0000000..80acd9d
--- /dev/null
+++ b/compat/zlib/contrib/ada/zlib.adb
@@ -0,0 +1,701 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib.adb,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+with Ada.Exceptions;
+with Ada.Unchecked_Conversion;
+with Ada.Unchecked_Deallocation;
+
+with Interfaces.C.Strings;
+
+with ZLib.Thin;
+
+package body ZLib is
+
+   use type Thin.Int;
+
+   type Z_Stream is new Thin.Z_Stream;
+
+   type Return_Code_Enum is
+      (OK,
+       STREAM_END,
+       NEED_DICT,
+       ERRNO,
+       STREAM_ERROR,
+       DATA_ERROR,
+       MEM_ERROR,
+       BUF_ERROR,
+       VERSION_ERROR);
+
+   type Flate_Step_Function is access
+     function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int;
+   pragma Convention (C, Flate_Step_Function);
+
+   type Flate_End_Function is access
+      function (Ctrm : in Thin.Z_Streamp) return Thin.Int;
+   pragma Convention (C, Flate_End_Function);
+
+   type Flate_Type is record
+      Step : Flate_Step_Function;
+      Done : Flate_End_Function;
+   end record;
+
+   subtype Footer_Array is Stream_Element_Array (1 .. 8);
+
+   Simple_GZip_Header : constant Stream_Element_Array (1 .. 10)
+     := (16#1f#, 16#8b#,                 --  Magic header
+         16#08#,                         --  Z_DEFLATED
+         16#00#,                         --  Flags
+         16#00#, 16#00#, 16#00#, 16#00#, --  Time
+         16#00#,                         --  XFlags
+         16#03#                          --  OS code
+        );
+   --  The simplest gzip header is not for informational, but just for
+   --  gzip format compatibility.
+   --  Note that some code below is using assumption
+   --  Simple_GZip_Header'Last > Footer_Array'Last, so do not make
+   --  Simple_GZip_Header'Last <= Footer_Array'Last.
+
+   Return_Code : constant array (Thin.Int range <>) of Return_Code_Enum
+     := (0 => OK,
+         1 => STREAM_END,
+         2 => NEED_DICT,
+        -1 => ERRNO,
+        -2 => STREAM_ERROR,
+        -3 => DATA_ERROR,
+        -4 => MEM_ERROR,
+        -5 => BUF_ERROR,
+        -6 => VERSION_ERROR);
+
+   Flate : constant array (Boolean) of Flate_Type
+     := (True  => (Step => Thin.Deflate'Access,
+                   Done => Thin.DeflateEnd'Access),
+         False => (Step => Thin.Inflate'Access,
+                   Done => Thin.InflateEnd'Access));
+
+   Flush_Finish : constant array (Boolean) of Flush_Mode
+     := (True => Finish, False => No_Flush);
+
+   procedure Raise_Error (Stream : in Z_Stream);
+   pragma Inline (Raise_Error);
+
+   procedure Raise_Error (Message : in String);
+   pragma Inline (Raise_Error);
+
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int);
+
+   procedure Free is new Ada.Unchecked_Deallocation
+      (Z_Stream, Z_Stream_Access);
+
+   function To_Thin_Access is new Ada.Unchecked_Conversion
+     (Z_Stream_Access, Thin.Z_Streamp);
+
+   procedure Translate_GZip
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  Separate translate routine for make gzip header.
+
+   procedure Translate_Auto
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  translate routine without additional headers.
+
+   -----------------
+   -- Check_Error --
+   -----------------
+
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is
+      use type Thin.Int;
+   begin
+      if Code /= Thin.Z_OK then
+         Raise_Error
+            (Return_Code_Enum'Image (Return_Code (Code))
+              & ": " & Last_Error_Message (Stream));
+      end if;
+   end Check_Error;
+
+   -----------
+   -- Close --
+   -----------
+
+   procedure Close
+     (Filter       : in out Filter_Type;
+      Ignore_Error : in     Boolean := False)
+   is
+      Code : Thin.Int;
+   begin
+      if not Ignore_Error and then not Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm));
+
+      if Ignore_Error or else Code = Thin.Z_OK then
+         Free (Filter.Strm);
+      else
+         declare
+            Error_Message : constant String
+              := Last_Error_Message (Filter.Strm.all);
+         begin
+            Free (Filter.Strm);
+            Ada.Exceptions.Raise_Exception
+               (ZLib_Error'Identity,
+                Return_Code_Enum'Image (Return_Code (Code))
+                  & ": " & Error_Message);
+         end;
+      end if;
+   end Close;
+
+   -----------
+   -- CRC32 --
+   -----------
+
+   function CRC32
+     (CRC  : in Unsigned_32;
+      Data : in Ada.Streams.Stream_Element_Array)
+      return Unsigned_32
+   is
+      use Thin;
+   begin
+      return Unsigned_32 (crc32 (ULong (CRC),
+                                 Data'Address,
+                                 Data'Length));
+   end CRC32;
+
+   procedure CRC32
+     (CRC  : in out Unsigned_32;
+      Data : in     Ada.Streams.Stream_Element_Array) is
+   begin
+      CRC := CRC32 (CRC, Data);
+   end CRC32;
+
+   ------------------
+   -- Deflate_Init --
+   ------------------
+
+   procedure Deflate_Init
+     (Filter       : in out Filter_Type;
+      Level        : in     Compression_Level  := Default_Compression;
+      Strategy     : in     Strategy_Type      := Default_Strategy;
+      Method       : in     Compression_Method := Deflated;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
+      Header       : in     Header_Type        := Default)
+   is
+      use type Thin.Int;
+      Win_Bits : Thin.Int := Thin.Int (Window_Bits);
+   begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      --  We allow ZLib to make header only in case of default header type.
+      --  Otherwise we would either do header by ourselfs, or do not do
+      --  header at all.
+
+      if Header = None or else Header = GZip then
+         Win_Bits := -Win_Bits;
+      end if;
+
+      --  For the GZip CRC calculation and make headers.
+
+      if Header = GZip then
+         Filter.CRC    := 0;
+         Filter.Offset := Simple_GZip_Header'First;
+      else
+         Filter.Offset := Simple_GZip_Header'Last + 1;
+      end if;
+
+      Filter.Strm        := new Z_Stream;
+      Filter.Compression := True;
+      Filter.Stream_End  := False;
+      Filter.Header      := Header;
+
+      if Thin.Deflate_Init
+           (To_Thin_Access (Filter.Strm),
+            Level      => Thin.Int (Level),
+            method     => Thin.Int (Method),
+            windowBits => Win_Bits,
+            memLevel   => Thin.Int (Memory_Level),
+            strategy   => Thin.Int (Strategy)) /= Thin.Z_OK
+      then
+         Raise_Error (Filter.Strm.all);
+      end if;
+   end Deflate_Init;
+
+   -----------
+   -- Flush --
+   -----------
+
+   procedure Flush
+     (Filter    : in out Filter_Type;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      No_Data : Stream_Element_Array := (1 .. 0 => 0);
+      Last    : Stream_Element_Offset;
+   begin
+      Translate (Filter, No_Data, Last, Out_Data, Out_Last, Flush);
+   end Flush;
+
+   -----------------------
+   -- Generic_Translate --
+   -----------------------
+
+   procedure Generic_Translate
+     (Filter          : in out ZLib.Filter_Type;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size)
+   is
+      In_Buffer  : Stream_Element_Array
+                     (1 .. Stream_Element_Offset (In_Buffer_Size));
+      Out_Buffer : Stream_Element_Array
+                     (1 .. Stream_Element_Offset (Out_Buffer_Size));
+      Last       : Stream_Element_Offset;
+      In_Last    : Stream_Element_Offset;
+      In_First   : Stream_Element_Offset;
+      Out_Last   : Stream_Element_Offset;
+   begin
+      Main : loop
+         Data_In (In_Buffer, Last);
+
+         In_First := In_Buffer'First;
+
+         loop
+            Translate
+              (Filter   => Filter,
+               In_Data  => In_Buffer (In_First .. Last),
+               In_Last  => In_Last,
+               Out_Data => Out_Buffer,
+               Out_Last => Out_Last,
+               Flush    => Flush_Finish (Last < In_Buffer'First));
+
+            if Out_Buffer'First <= Out_Last then
+               Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last));
+            end if;
+
+            exit Main when Stream_End (Filter);
+
+            --  The end of in buffer.
+
+            exit when In_Last = Last;
+
+            In_First := In_Last + 1;
+         end loop;
+      end loop Main;
+
+   end Generic_Translate;
+
+   ------------------
+   -- Inflate_Init --
+   ------------------
+
+   procedure Inflate_Init
+     (Filter      : in out Filter_Type;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
+      Header      : in     Header_Type      := Default)
+   is
+      use type Thin.Int;
+      Win_Bits : Thin.Int := Thin.Int (Window_Bits);
+
+      procedure Check_Version;
+      --  Check the latest header types compatibility.
+
+      procedure Check_Version is
+      begin
+         if Version <= "1.1.4" then
+            Raise_Error
+              ("Inflate header type " & Header_Type'Image (Header)
+               & " incompatible with ZLib version " & Version);
+         end if;
+      end Check_Version;
+
+   begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      case Header is
+         when None =>
+            Check_Version;
+
+            --  Inflate data without headers determined
+            --  by negative Win_Bits.
+
+            Win_Bits := -Win_Bits;
+         when GZip =>
+            Check_Version;
+
+            --  Inflate gzip data defined by flag 16.
+
+            Win_Bits := Win_Bits + 16;
+         when Auto =>
+            Check_Version;
+
+            --  Inflate with automatic detection
+            --  of gzip or native header defined by flag 32.
+
+            Win_Bits := Win_Bits + 32;
+         when Default => null;
+      end case;
+
+      Filter.Strm        := new Z_Stream;
+      Filter.Compression := False;
+      Filter.Stream_End  := False;
+      Filter.Header      := Header;
+
+      if Thin.Inflate_Init
+         (To_Thin_Access (Filter.Strm), Win_Bits) /= Thin.Z_OK
+      then
+         Raise_Error (Filter.Strm.all);
+      end if;
+   end Inflate_Init;
+
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Filter : in Filter_Type) return Boolean is
+   begin
+      return Filter.Strm /= null;
+   end Is_Open;
+
+   -----------------
+   -- Raise_Error --
+   -----------------
+
+   procedure Raise_Error (Message : in String) is
+   begin
+      Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message);
+   end Raise_Error;
+
+   procedure Raise_Error (Stream : in Z_Stream) is
+   begin
+      Raise_Error (Last_Error_Message (Stream));
+   end Raise_Error;
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Filter : in out Filter_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush)
+   is
+      In_Last    : Stream_Element_Offset;
+      Item_First : Ada.Streams.Stream_Element_Offset := Item'First;
+      V_Flush    : Flush_Mode := Flush;
+
+   begin
+      pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1);
+      pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
+
+      loop
+         if Rest_Last = Buffer'First - 1 then
+            V_Flush := Finish;
+
+         elsif Rest_First > Rest_Last then
+            Read (Buffer, Rest_Last);
+            Rest_First := Buffer'First;
+
+            if Rest_Last < Buffer'First then
+               V_Flush := Finish;
+            end if;
+         end if;
+
+         Translate
+           (Filter   => Filter,
+            In_Data  => Buffer (Rest_First .. Rest_Last),
+            In_Last  => In_Last,
+            Out_Data => Item (Item_First .. Item'Last),
+            Out_Last => Last,
+            Flush    => V_Flush);
+
+         Rest_First := In_Last + 1;
+
+         exit when Stream_End (Filter)
+           or else Last = Item'Last
+           or else (Last >= Item'First and then Allow_Read_Some);
+
+         Item_First := Last + 1;
+      end loop;
+   end Read;
+
+   ----------------
+   -- Stream_End --
+   ----------------
+
+   function Stream_End (Filter : in Filter_Type) return Boolean is
+   begin
+      if Filter.Header = GZip and Filter.Compression then
+         return Filter.Stream_End
+            and then Filter.Offset = Footer_Array'Last + 1;
+      else
+         return Filter.Stream_End;
+      end if;
+   end Stream_End;
+
+   --------------
+   -- Total_In --
+   --------------
+
+   function Total_In (Filter : in Filter_Type) return Count is
+   begin
+      return Count (Thin.Total_In (To_Thin_Access (Filter.Strm).all));
+   end Total_In;
+
+   ---------------
+   -- Total_Out --
+   ---------------
+
+   function Total_Out (Filter : in Filter_Type) return Count is
+   begin
+      return Count (Thin.Total_Out (To_Thin_Access (Filter.Strm).all));
+   end Total_Out;
+
+   ---------------
+   -- Translate --
+   ---------------
+
+   procedure Translate
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode) is
+   begin
+      if Filter.Header = GZip and then Filter.Compression then
+         Translate_GZip
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+      else
+         Translate_Auto
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+      end if;
+   end Translate;
+
+   --------------------
+   -- Translate_Auto --
+   --------------------
+
+   procedure Translate_Auto
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      use type Thin.Int;
+      Code : Thin.Int;
+
+   begin
+      if not Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      if Out_Data'Length = 0 and then In_Data'Length = 0 then
+         raise Constraint_Error;
+      end if;
+
+      Set_Out (Filter.Strm.all, Out_Data'Address, Out_Data'Length);
+      Set_In  (Filter.Strm.all, In_Data'Address, In_Data'Length);
+
+      Code := Flate (Filter.Compression).Step
+        (To_Thin_Access (Filter.Strm),
+         Thin.Int (Flush));
+
+      if Code = Thin.Z_STREAM_END then
+         Filter.Stream_End := True;
+      else
+         Check_Error (Filter.Strm.all, Code);
+      end if;
+
+      In_Last  := In_Data'Last
+         - Stream_Element_Offset (Avail_In (Filter.Strm.all));
+      Out_Last := Out_Data'Last
+         - Stream_Element_Offset (Avail_Out (Filter.Strm.all));
+   end Translate_Auto;
+
+   --------------------
+   -- Translate_GZip --
+   --------------------
+
+   procedure Translate_GZip
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      Out_First : Stream_Element_Offset;
+
+      procedure Add_Data (Data : in Stream_Element_Array);
+      --  Add data to stream from the Filter.Offset till necessary,
+      --  used for add gzip headr/footer.
+
+      procedure Put_32
+        (Item : in out Stream_Element_Array;
+         Data : in     Unsigned_32);
+      pragma Inline (Put_32);
+
+      --------------
+      -- Add_Data --
+      --------------
+
+      procedure Add_Data (Data : in Stream_Element_Array) is
+         Data_First : Stream_Element_Offset renames Filter.Offset;
+         Data_Last  : Stream_Element_Offset;
+         Data_Len   : Stream_Element_Offset; --  -1
+         Out_Len    : Stream_Element_Offset; --  -1
+      begin
+         Out_First := Out_Last + 1;
+
+         if Data_First > Data'Last then
+            return;
+         end if;
+
+         Data_Len  := Data'Last     - Data_First;
+         Out_Len   := Out_Data'Last - Out_First;
+
+         if Data_Len <= Out_Len then
+            Out_Last  := Out_First  + Data_Len;
+            Data_Last := Data'Last;
+         else
+            Out_Last  := Out_Data'Last;
+            Data_Last := Data_First + Out_Len;
+         end if;
+
+         Out_Data (Out_First .. Out_Last) := Data (Data_First .. Data_Last);
+
+         Data_First := Data_Last + 1;
+         Out_First  := Out_Last + 1;
+      end Add_Data;
+
+      ------------
+      -- Put_32 --
+      ------------
+
+      procedure Put_32
+        (Item : in out Stream_Element_Array;
+         Data : in     Unsigned_32)
+      is
+         D : Unsigned_32 := Data;
+      begin
+         for J in Item'First .. Item'First + 3 loop
+            Item (J) := Stream_Element (D and 16#FF#);
+            D := Shift_Right (D, 8);
+         end loop;
+      end Put_32;
+
+   begin
+      Out_Last := Out_Data'First - 1;
+
+      if not Filter.Stream_End then
+         Add_Data (Simple_GZip_Header);
+
+         Translate_Auto
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data (Out_First .. Out_Data'Last),
+            Out_Last => Out_Last,
+            Flush    => Flush);
+
+         CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last));
+      end if;
+
+      if Filter.Stream_End and then Out_Last <= Out_Data'Last then
+         --  This detection method would work only when
+         --  Simple_GZip_Header'Last > Footer_Array'Last
+
+         if Filter.Offset = Simple_GZip_Header'Last + 1 then
+            Filter.Offset := Footer_Array'First;
+         end if;
+
+         declare
+            Footer : Footer_Array;
+         begin
+            Put_32 (Footer, Filter.CRC);
+            Put_32 (Footer (Footer'First + 4 .. Footer'Last),
+                    Unsigned_32 (Total_In (Filter)));
+            Add_Data (Footer);
+         end;
+      end if;
+   end Translate_GZip;
+
+   -------------
+   -- Version --
+   -------------
+
+   function Version return String is
+   begin
+      return Interfaces.C.Strings.Value (Thin.zlibVersion);
+   end Version;
+
+   -----------
+   -- Write --
+   -----------
+
+   procedure Write
+     (Filter : in out Filter_Type;
+      Item   : in     Ada.Streams.Stream_Element_Array;
+      Flush  : in     Flush_Mode := No_Flush)
+   is
+      Buffer   : Stream_Element_Array (1 .. Buffer_Size);
+      In_Last  : Stream_Element_Offset;
+      Out_Last : Stream_Element_Offset;
+      In_First : Stream_Element_Offset := Item'First;
+   begin
+      if Item'Length = 0 and Flush = No_Flush then
+         return;
+      end if;
+
+      loop
+         Translate
+           (Filter   => Filter,
+            In_Data  => Item (In_First .. Item'Last),
+            In_Last  => In_Last,
+            Out_Data => Buffer,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+
+         if Out_Last >= Buffer'First then
+            Write (Buffer (1 .. Out_Last));
+         end if;
+
+         exit when In_Last = Item'Last or Stream_End (Filter);
+
+         In_First := In_Last + 1;
+      end loop;
+   end Write;
+
+end ZLib;
diff --git a/compat/zlib/contrib/ada/zlib.ads b/compat/zlib/contrib/ada/zlib.ads
new file mode 100644
index 0000000..5dfabc3
--- /dev/null
+++ b/compat/zlib/contrib/ada/zlib.ads
@@ -0,0 +1,328 @@
+------------------------------------------------------------------------------
+--                      ZLib for Ada thick binding.                         --
+--                                                                          --
+--              Copyright (C) 2002-2004 Dmitriy Anisimkov                   --
+--                                                                          --
+--  This library is free software; you can redistribute it and/or modify    --
+--  it under the terms of the GNU General Public License as published by    --
+--  the Free Software Foundation; either version 2 of the License, or (at   --
+--  your option) any later version.                                         --
+--                                                                          --
+--  This library is distributed in the hope that it will be useful, but     --
+--  WITHOUT ANY WARRANTY; without even the implied warranty of              --
+--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       --
+--  General Public License for more details.                                --
+--                                                                          --
+--  You should have received a copy of the GNU General Public License       --
+--  along with this library; if not, write to the Free Software Foundation, --
+--  Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.          --
+--                                                                          --
+--  As a special exception, if other files instantiate generics from this   --
+--  unit, or you link this unit with other files to produce an executable,  --
+--  this  unit  does not  by itself cause  the resulting executable to be   --
+--  covered by the GNU General Public License. This exception does not      --
+--  however invalidate any other reasons why the executable file  might be  --
+--  covered by the  GNU Public License.                                     --
+------------------------------------------------------------------------------
+
+--  $Id: zlib.ads,v 1.1 2008/12/19 14:44:49 dkf Exp $
+
+with Ada.Streams;
+
+with Interfaces;
+
+package ZLib is
+
+   ZLib_Error   : exception;
+   Status_Error : exception;
+
+   type Compression_Level is new Integer range -1 .. 9;
+
+   type Flush_Mode is private;
+
+   type Compression_Method is private;
+
+   type Window_Bits_Type is new Integer range 8 .. 15;
+
+   type Memory_Level_Type is new Integer range 1 .. 9;
+
+   type Unsigned_32 is new Interfaces.Unsigned_32;
+
+   type Strategy_Type is private;
+
+   type Header_Type is (None, Auto, Default, GZip);
+   --  Header type usage have a some limitation for inflate.
+   --  See comment for Inflate_Init.
+
+   subtype Count is Ada.Streams.Stream_Element_Count;
+
+   Default_Memory_Level : constant Memory_Level_Type := 8;
+   Default_Window_Bits  : constant Window_Bits_Type  := 15;
+
+   ----------------------------------
+   -- Compression method constants --
+   ----------------------------------
+
+   Deflated : constant Compression_Method;
+   --  Only one method allowed in this ZLib version
+
+   ---------------------------------
+   -- Compression level constants --
+   ---------------------------------
+
+   No_Compression      : constant Compression_Level := 0;
+   Best_Speed          : constant Compression_Level := 1;
+   Best_Compression    : constant Compression_Level := 9;
+   Default_Compression : constant Compression_Level := -1;
+
+   --------------------------
+   -- Flush mode constants --
+   --------------------------
+
+   No_Flush      : constant Flush_Mode;
+   --  Regular way for compression, no flush
+
+   Partial_Flush : constant Flush_Mode;
+   --  Will be removed, use Z_SYNC_FLUSH instead
+
+   Sync_Flush    : constant Flush_Mode;
+   --  All pending output is flushed to the output buffer and the output
+   --  is aligned on a byte boundary, so that the decompressor can get all
+   --  input data available so far. (In particular avail_in is zero after the
+   --  call if enough output space has been provided  before the call.)
+   --  Flushing may degrade compression for some compression algorithms and so
+   --  it should be used only when necessary.
+
+   Block_Flush   : constant Flush_Mode;
+   --  Z_BLOCK requests that inflate() stop
+   --  if and when it get to the next deflate block boundary. When decoding the
+   --  zlib or gzip format, this will cause inflate() to return immediately
+   --  after the header and before the first block. When doing a raw inflate,
+   --  inflate() will go ahead and process the first block, and will return
+   --  when it gets to the end of that block, or when it runs out of data.
+
+   Full_Flush    : constant Flush_Mode;
+   --  All output is flushed as with SYNC_FLUSH, and the compression state
+   --  is reset so that decompression can restart from this point if previous
+   --  compressed data has been damaged or if random access is desired. Using
+   --  Full_Flush too often can seriously degrade the compression.
+
+   Finish        : constant Flush_Mode;
+   --  Just for tell the compressor that input data is complete.
+
+   ------------------------------------
+   -- Compression strategy constants --
+   ------------------------------------
+
+   --  RLE stategy could be used only in version 1.2.0 and later.
+
+   Filtered         : constant Strategy_Type;
+   Huffman_Only     : constant Strategy_Type;
+   RLE              : constant Strategy_Type;
+   Default_Strategy : constant Strategy_Type;
+
+   Default_Buffer_Size : constant := 4096;
+
+   type Filter_Type is tagged limited private;
+   --  The filter is for compression and for decompression.
+   --  The usage of the type is depend of its initialization.
+
+   function Version return String;
+   pragma Inline (Version);
+   --  Return string representation of the ZLib version.
+
+   procedure Deflate_Init
+     (Filter       : in out Filter_Type;
+      Level        : in     Compression_Level  := Default_Compression;
+      Strategy     : in     Strategy_Type      := Default_Strategy;
+      Method       : in     Compression_Method := Deflated;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
+      Header       : in     Header_Type        := Default);
+   --  Compressor initialization.
+   --  When Header parameter is Auto or Default, then default zlib header
+   --  would be provided for compressed data.
+   --  When Header is GZip, then gzip header would be set instead of
+   --  default header.
+   --  When Header is None, no header would be set for compressed data.
+
+   procedure Inflate_Init
+     (Filter      : in out Filter_Type;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
+      Header      : in     Header_Type      := Default);
+   --  Decompressor initialization.
+   --  Default header type mean that ZLib default header is expecting in the
+   --  input compressed stream.
+   --  Header type None mean that no header is expecting in the input stream.
+   --  GZip header type mean that GZip header is expecting in the
+   --  input compressed stream.
+   --  Auto header type mean that header type (GZip or Native) would be
+   --  detected automatically in the input stream.
+   --  Note that header types parameter values None, GZip and Auto are
+   --  supported for inflate routine only in ZLib versions 1.2.0.2 and later.
+   --  Deflate_Init is supporting all header types.
+
+   function Is_Open (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Is_Open);
+   --  Is the filter opened for compression or decompression.
+
+   procedure Close
+     (Filter       : in out Filter_Type;
+      Ignore_Error : in     Boolean := False);
+   --  Closing the compression or decompressor.
+   --  If stream is closing before the complete and Ignore_Error is False,
+   --  The exception would be raised.
+
+   generic
+      with procedure Data_In
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+      with procedure Data_Out
+        (Item : in Ada.Streams.Stream_Element_Array);
+   procedure Generic_Translate
+     (Filter          : in out Filter_Type;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size);
+   --  Compress/decompress data fetch from Data_In routine and pass the result
+   --  to the Data_Out routine. User should provide Data_In and Data_Out
+   --  for compression/decompression data flow.
+   --  Compression or decompression depend on Filter initialization.
+
+   function Total_In (Filter : in Filter_Type) return Count;
+   pragma Inline (Total_In);
+   --  Returns total number of input bytes read so far
+
+   function Total_Out (Filter : in Filter_Type) return Count;
+   pragma Inline (Total_Out);
+   --  Returns total number of bytes output so far
+
+   function CRC32
+     (CRC    : in Unsigned_32;
+      Data   : in Ada.Streams.Stream_Element_Array)
+      return Unsigned_32;
+   pragma Inline (CRC32);
+   --  Compute CRC32, it could be necessary for make gzip format
+
+   procedure CRC32
+     (CRC  : in out Unsigned_32;
+      Data : in     Ada.Streams.Stream_Element_Array);
+   pragma Inline (CRC32);
+   --  Compute CRC32, it could be necessary for make gzip format
+
+   -------------------------------------------------
+   --  Below is more complex low level routines.  --
+   -------------------------------------------------
+
+   procedure Translate
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  Compress/decompress the In_Data buffer and place the result into
+   --  Out_Data. In_Last is the index of last element from In_Data accepted by
+   --  the Filter. Out_Last is the last element of the received data from
+   --  Filter. To tell the filter that incoming data are complete put the
+   --  Flush parameter to Finish.
+
+   function Stream_End (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Stream_End);
+   --  Return the true when the stream is complete.
+
+   procedure Flush
+     (Filter    : in out Filter_Type;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   pragma Inline (Flush);
+   --  Flushing the data from the compressor.
+
+   generic
+      with procedure Write
+        (Item : in Ada.Streams.Stream_Element_Array);
+      --  User should provide this routine for accept
+      --  compressed/decompressed data.
+
+      Buffer_Size : in Ada.Streams.Stream_Element_Offset
+         := Default_Buffer_Size;
+      --  Buffer size for Write user routine.
+
+   procedure Write
+     (Filter  : in out Filter_Type;
+      Item    : in     Ada.Streams.Stream_Element_Array;
+      Flush   : in     Flush_Mode := No_Flush);
+   --  Compress/Decompress data from Item to the generic parameter procedure
+   --  Write. Output buffer size could be set in Buffer_Size generic parameter.
+
+   generic
+      with procedure Read
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+      --  User should provide data for compression/decompression
+      --  thru this routine.
+
+      Buffer : in out Ada.Streams.Stream_Element_Array;
+      --  Buffer for keep remaining data from the previous
+      --  back read.
+
+      Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset;
+      --  Rest_First have to be initialized to Buffer'Last + 1
+      --  Rest_Last have to be initialized to Buffer'Last
+      --  before usage.
+
+      Allow_Read_Some : in Boolean := False;
+      --  Is it allowed to return Last < Item'Last before end of data.
+
+   procedure Read
+     (Filter : in out Filter_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush);
+   --  Compress/Decompress data from generic parameter procedure Read to the
+   --  Item. User should provide Buffer and initialized Rest_First, Rest_Last
+   --  indicators. If Allow_Read_Some is True, Read routines could return
+   --  Last < Item'Last only at end of stream.
+
+private
+
+   use Ada.Streams;
+
+   pragma Assert (Ada.Streams.Stream_Element'Size    =    8);
+   pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8);
+
+   type Flush_Mode is new Integer range 0 .. 5;
+
+   type Compression_Method is new Integer range 8 .. 8;
+
+   type Strategy_Type is new Integer range 0 .. 3;
+
+   No_Flush      : constant Flush_Mode := 0;
+   Partial_Flush : constant Flush_Mode := 1;
+   Sync_Flush    : constant Flush_Mode := 2;
+   Full_Flush    : constant Flush_Mode := 3;
+   Finish        : constant Flush_Mode := 4;
+   Block_Flush   : constant Flush_Mode := 5;
+
+   Filtered         : constant Strategy_Type := 1;
+   Huffman_Only     : constant Strategy_Type := 2;
+   RLE              : constant Strategy_Type := 3;
+   Default_Strategy : constant Strategy_Type := 0;
+
+   Deflated : constant Compression_Method := 8;
+
+   type Z_Stream;
+
+   type Z_Stream_Access is access all Z_Stream;
+
+   type Filter_Type is tagged limited record
+      Strm        : Z_Stream_Access;
+      Compression : Boolean;
+      Stream_End  : Boolean;
+      Header      : Header_Type;
+      CRC         : Unsigned_32;
+      Offset      : Stream_Element_Offset;
+      --  Offset for gzip header/footer output.
+   end record;
+
+end ZLib;
diff --git a/compat/zlib/contrib/ada/zlib.gpr b/compat/zlib/contrib/ada/zlib.gpr
new file mode 100644
index 0000000..296b22a
--- /dev/null
+++ b/compat/zlib/contrib/ada/zlib.gpr
@@ -0,0 +1,20 @@
+project Zlib is
+
+   for Languages use ("Ada");
+   for Source_Dirs use (".");
+   for Object_Dir use ".";
+   for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
+
+   package Compiler is
+      for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
+   end Compiler;
+
+   package Linker is
+      for Default_Switches ("ada") use ("-lz");
+   end Linker;
+
+   package Builder is
+      for Default_Switches ("ada") use ("-s", "-gnatQ");
+   end Builder;
+
+end Zlib;