Upgrade to zlib-1.3.0

92 files changed, 2260 insertions, 3330 deletions

diff --git a/compat/zlib/CMakeLists.txt b/compat/zlib/CMakeLists.txt
index b412dc7..7f1b69f 100644
--- a/compat/zlib/CMakeLists.txt
+++ b/compat/zlib/CMakeLists.txt
@@ -1,9 +1,9 @@
-cmake_minimum_required(VERSION 2.4.4)
+cmake_minimum_required(VERSION 2.4.4...3.15.0)
 set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
 
 project(zlib C)
 
-set(VERSION "1.2.13")
+set(VERSION "1.3")
 
 set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
 set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")
diff --git a/compat/zlib/ChangeLog b/compat/zlib/ChangeLog
index 457526b..8707988 100644
--- a/compat/zlib/ChangeLog
+++ b/compat/zlib/ChangeLog
@@ -1,6 +1,24 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.3 (18 Aug 2023)
+- Remove K&R function definitions and zlib2ansi
+- Fix bug in deflateBound() for level 0 and memLevel 9
+- Fix bug when gzungetc() is used immediately after gzopen()
+- Fix bug when using gzflush() with a very small buffer
+- Fix crash when gzsetparams() attempted for transparent write
+- Fix test/example.c to work with FORCE_STORED
+- Rewrite of zran in examples (see zran.c version history)
+- Fix minizip to allow it to open an empty zip file
+- Fix reading disk number start on zip64 files in minizip
+- Fix logic error in minizip argument processing
+- Add minizip testing to Makefile
+- Read multiple bytes instead of byte-by-byte in minizip unzip.c
+- Add memory sanitizer to configure (--memory)
+- Various portability improvements
+- Various documentation improvements
+- Various spelling and typo corrections
+
 Changes in 1.2.13 (13 Oct 2022)
 - Fix configure issue that discarded provided CC definition
 - Correct incorrect inputs provided to the CRC functions
@@ -1445,7 +1463,7 @@ Changes in 0.99 (27 Jan 96)
 - fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
 - in fcalloc, normalize pointer if size > 65520 bytes
 - don't use special fcalloc for 32 bit Borland C++
-- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc.
 - use Z_BINARY instead of BINARY
 - document that gzclose after gzdopen will close the file
 - allow "a" as mode in gzopen
diff --git a/compat/zlib/FAQ b/compat/zlib/FAQ
index 99b7cf9..55f1cdc 100644
--- a/compat/zlib/FAQ
+++ b/compat/zlib/FAQ
@@ -4,7 +4,7 @@
 
 If your question is not there, please check the zlib home page
 http://zlib.net/ which may have more recent information.
-The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
+The latest zlib FAQ is at http://zlib.net/zlib_faq.html
 
 
  1. Is zlib Y2K-compliant?
diff --git a/compat/zlib/Makefile.in b/compat/zlib/Makefile.in
index 7d2713f..34d3cd7 100644
--- a/compat/zlib/Makefile.in
+++ b/compat/zlib/Makefile.in
@@ -28,7 +28,7 @@ CPP=$(CC) -E
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.13
+SHAREDLIBV=libz.so.1.3
 SHAREDLIBM=libz.so.1
 LIBS=$(STATICLIB) $(SHAREDLIBV)
 
@@ -359,8 +359,14 @@ zconf.h.cmakein: $(SRCDIR)zconf.h.in
 zconf: $(SRCDIR)zconf.h.in
 	cp -p $(SRCDIR)zconf.h.in zconf.h
 
+minizip-test: static
+	cd contrib/minizip && { CFLAGS="$(CFLAGS)" $(MAKE) test ; cd ../.. ; }
+
+minizip-clean:
+	cd contrib/minizip && { $(MAKE) clean ; cd ../.. ; }
+
 mostlyclean: clean
-clean:
+clean: minizip-clean
 	rm -f *.o *.lo *~ \
 	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
 	   example64$(EXE) minigzip64$(EXE) \
diff --git a/compat/zlib/README b/compat/zlib/README
index ba34d18..e02fc5a 100644
--- a/compat/zlib/README
+++ b/compat/zlib/README
@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.13 is a general purpose data compression library.  All the code is
+zlib 1.3 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -29,18 +29,17 @@ PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
 
 Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
-http://marknelson.us/1997/01/01/zlib-engine/ .
+https://marknelson.us/posts/1997/01/01/zlib-engine.html .
 
-The changes made in version 1.2.13 are documented in the file ChangeLog.
+The changes made in version 1.3 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
-zlib is available in Java using the java.util.zip package, documented at
-http://java.sun.com/developer/technicalArticles/Programming/compression/ .
+zlib is available in Java using the java.util.zip package. Follow the API
+Documentation link at: https://docs.oracle.com/search/?q=java.util.zip .
 
-A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
-at CPAN (Comprehensive Perl Archive Network) sites, including
-http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
+A Perl interface to zlib and bzip2 written by Paul Marquess <pmqs@cpan.org>
+can be found at https://github.com/pmqs/IO-Compress .
 
 A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
 available in Python 1.5 and later versions, see
@@ -64,7 +63,7 @@ Notes for some targets:
 - zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
   when compiled with cc.
 
-- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+- On Digital Unix 4.0D (formerly OSF/1) on AlphaServer, the cc option -std1 is
   necessary to get gzprintf working correctly. This is done by configure.
 
 - zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
@@ -84,7 +83,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2022 Jean-loup Gailly and Mark Adler
+ (C) 1995-2023 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
diff --git a/compat/zlib/adler32.c b/compat/zlib/adler32.c
index d0be438..04b81d2 100644
--- a/compat/zlib/adler32.c
+++ b/compat/zlib/adler32.c
@@ -7,8 +7,6 @@
 
 #include "zutil.h"
 
-local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
-
 #define BASE 65521U     /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
@@ -60,11 +58,7 @@ local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 #endif
 
 /* ========================================================================= */
-uLong ZEXPORT adler32_z(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    z_size_t len;
-{
+uLong ZEXPORT adler32_z(uLong adler, const Bytef *buf, z_size_t len) {
     unsigned long sum2;
     unsigned n;
 
@@ -131,20 +125,12 @@ uLong ZEXPORT adler32_z(adler, buf, len)
 }
 
 /* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
-{
+uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len) {
     return adler32_z(adler, buf, len);
 }
 
 /* ========================================================================= */
-local uLong adler32_combine_(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
+local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2) {
     unsigned long sum1;
     unsigned long sum2;
     unsigned rem;
@@ -169,18 +155,10 @@ local uLong adler32_combine_(adler1, adler2, len2)
 }
 
 /* ========================================================================= */
-uLong ZEXPORT adler32_combine(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off_t len2;
-{
+uLong ZEXPORT adler32_combine(uLong adler1, uLong adler2, z_off_t len2) {
     return adler32_combine_(adler1, adler2, len2);
 }
 
-uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
+uLong ZEXPORT adler32_combine64(uLong adler1, uLong adler2, z_off64_t len2) {
     return adler32_combine_(adler1, adler2, len2);
 }
diff --git a/compat/zlib/compress.c b/compat/zlib/compress.c
index 2ad5326..f43bacf 100644
--- a/compat/zlib/compress.c
+++ b/compat/zlib/compress.c
@@ -19,13 +19,8 @@
    memory, Z_BUF_ERROR if there was not enough room in the output buffer,
    Z_STREAM_ERROR if the level parameter is invalid.
 */
-int ZEXPORT compress2(dest, destLen, source, sourceLen, level)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-    int level;
-{
+int ZEXPORT compress2(Bytef *dest, uLongf *destLen, const Bytef *source,
+                      uLong sourceLen, int level) {
     z_stream stream;
     int err;
     const uInt max = (uInt)-1;
@@ -65,12 +60,8 @@ int ZEXPORT compress2(dest, destLen, source, sourceLen, level)
 
 /* ===========================================================================
  */
-int ZEXPORT compress(dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
+int ZEXPORT compress(Bytef *dest, uLongf *destLen, const Bytef *source,
+                     uLong sourceLen) {
     return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
 }
 
@@ -78,9 +69,7 @@ int ZEXPORT compress(dest, destLen, source, sourceLen)
      If the default memLevel or windowBits for deflateInit() is changed, then
    this function needs to be updated.
  */
-uLong ZEXPORT compressBound(sourceLen)
-    uLong sourceLen;
-{
+uLong ZEXPORT compressBound(uLong sourceLen) {
     return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
            (sourceLen >> 25) + 13;
 }
diff --git a/compat/zlib/configure b/compat/zlib/configure
index fa4d5da..cc867c9 100755
--- a/compat/zlib/configure
+++ b/compat/zlib/configure
@@ -44,8 +44,6 @@ STATICLIB=libz.a
 
 # extract zlib version numbers from zlib.h
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < ${SRCDIR}zlib.h`
-VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < ${SRCDIR}zlib.h`
-VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h`
 
 # establish commands for library building
@@ -90,7 +88,8 @@ build64=0
 gcc=0
 warn=0
 debug=0
-sanitize=0
+address=0
+memory=0
 old_cc="$CC"
 old_cflags="$CFLAGS"
 OBJC='$(OBJZ) $(OBJG)'
@@ -102,7 +101,7 @@ leave()
   if test "$*" != "0"; then
     echo "** $0 aborting." | tee -a configure.log
   fi
-  rm -f $test.[co] $test $test$shared_ext $test.gcno ./--version
+  rm -rf $test.[co] $test $test$shared_ext $test.gcno $test.dSYM ./--version
   echo -------------------- >> configure.log
   echo >> configure.log
   echo >> configure.log
@@ -141,7 +140,9 @@ case "$1" in
     -c* | --const) zconst=1; shift ;;
     -w* | --warn) warn=1; shift ;;
     -d* | --debug) debug=1; shift ;;
-    --sanitize) sanitize=1; shift ;;
+    --sanitize) address=1; shift ;;
+    --address) address=1; shift ;;
+    --memory) memory=1; shift ;;
     *)
       echo "unknown option: $1" | tee -a configure.log
       echo "$0 --help for help" | tee -a configure.log
@@ -211,8 +212,11 @@ if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
       CFLAGS="${CFLAGS} -Wall -Wextra"
     fi
   fi
-  if test $sanitize -eq 1; then
-    CFLAGS="${CFLAGS} -g -fsanitize=address"
+  if test $address -eq 1; then
+    CFLAGS="${CFLAGS} -g -fsanitize=address -fno-omit-frame-pointer"
+  fi
+  if test $memory -eq 1; then
+    CFLAGS="${CFLAGS} -g -fsanitize=memory -fno-omit-frame-pointer"
   fi
   if test $debug -eq 1; then
     CFLAGS="${CFLAGS} -DZLIB_DEBUG"
@@ -259,8 +263,10 @@ if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
         SHAREDLIB=libz$shared_ext
         SHAREDLIBV=libz.$VER$shared_ext
         SHAREDLIBM=libz.$VER1$shared_ext
-        LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
-        if libtool -V 2>&1 | grep Apple > /dev/null; then
+        LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER"}
+        if "${CROSS_PREFIX}libtool" -V 2>&1 | grep Apple > /dev/null; then
+            AR="${CROSS_PREFIX}libtool"
+        elif libtool -V 2>&1 | grep Apple > /dev/null; then
             AR="libtool"
         else
             AR="/usr/bin/libtool"
@@ -860,7 +866,7 @@ echo prefix = $prefix >> configure.log
 echo sharedlibdir = $sharedlibdir >> configure.log
 echo uname = $uname >> configure.log
 
-# udpate Makefile with the configure results
+# update Makefile with the configure results
 sed < ${SRCDIR}Makefile.in "
 /^CC *=/s#=.*#=$CC#
 /^CFLAGS *=/s#=.*#=$CFLAGS#
diff --git a/compat/zlib/contrib/ada/readme.txt b/compat/zlib/contrib/ada/readme.txt
index ce4d2ca..efdd639 100644
--- a/compat/zlib/contrib/ada/readme.txt
+++ b/compat/zlib/contrib/ada/readme.txt
@@ -8,8 +8,8 @@ It provides Ada-style access to the ZLib C library.
 
         Here are the main changes since ZLib.Ada 1.2:
 
-- Attension: ZLib.Read generic routine have a initialization requirement
-  for Read_Last parameter now. It is a bit incompartible with previous version,
+- Attention: ZLib.Read generic routine have a initialization requirement
+  for Read_Last parameter now. It is a bit incompatible with previous version,
   but extends functionality, we could use new parameters Allow_Read_Some and
   Flush now.
 
diff --git a/compat/zlib/contrib/ada/test.adb b/compat/zlib/contrib/ada/test.adb
index 90773ac..8b35031 100644
--- a/compat/zlib/contrib/ada/test.adb
+++ b/compat/zlib/contrib/ada/test.adb
@@ -65,12 +65,12 @@ procedure Test is
    Time_Stamp : Ada.Calendar.Time;
 
    procedure Generate_File;
-   --  Generate file of spetsified size with some random data.
+   --  Generate file of specified size with some random data.
    --  The random data is repeatable, for the good compression.
 
    procedure Compare_Streams
      (Left, Right : in out Root_Stream_Type'Class);
-   --  The procedure compearing data in 2 streams.
+   --  The procedure comparing data in 2 streams.
    --  It is for compare data before and after compression/decompression.
 
    procedure Compare_Files (Left, Right : String);
diff --git a/compat/zlib/contrib/ada/zlib-streams.ads b/compat/zlib/contrib/ada/zlib-streams.ads
index 8e26cd4..af13693 100644
--- a/compat/zlib/contrib/ada/zlib-streams.ads
+++ b/compat/zlib/contrib/ada/zlib-streams.ads
@@ -62,7 +62,7 @@ package ZLib.Streams is
                                     := Default_Buffer_Size;
       Write_Buffer_Size : in     Ada.Streams.Stream_Element_Offset
                                     := Default_Buffer_Size);
-   --  Create the Comression/Decompression stream.
+   --  Create the Compression/Decompression stream.
    --  If mode is In_Stream then Write operation is disabled.
    --  If mode is Out_Stream then Read operation is disabled.
 
diff --git a/compat/zlib/contrib/ada/zlib.adb b/compat/zlib/contrib/ada/zlib.adb
index 8b6fd68..c1abe79 100644
--- a/compat/zlib/contrib/ada/zlib.adb
+++ b/compat/zlib/contrib/ada/zlib.adb
@@ -204,7 +204,7 @@ package body ZLib is
       end if;
 
       --  We allow ZLib to make header only in case of default header type.
-      --  Otherwise we would either do header by ourselfs, or do not do
+      --  Otherwise we would either do header by ourselves, or do not do
       --  header at all.
 
       if Header = None or else Header = GZip then
diff --git a/compat/zlib/contrib/ada/zlib.ads b/compat/zlib/contrib/ada/zlib.ads
index 79ffc40..81aaf1b 100644
--- a/compat/zlib/contrib/ada/zlib.ads
+++ b/compat/zlib/contrib/ada/zlib.ads
@@ -114,7 +114,7 @@ package ZLib is
    -- Compression strategy constants --
    ------------------------------------
 
-   --  RLE stategy could be used only in version 1.2.0 and later.
+   --  RLE strategy could be used only in version 1.2.0 and later.
 
    Filtered         : constant Strategy_Type;
    Huffman_Only     : constant Strategy_Type;
diff --git a/compat/zlib/contrib/delphi/ZLib.pas b/compat/zlib/contrib/delphi/ZLib.pas
index 8be5fa2..814ffa6 100644
--- a/compat/zlib/contrib/delphi/ZLib.pas
+++ b/compat/zlib/contrib/delphi/ZLib.pas
@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.13';
+  zlib_version = '1.3.0';
 
 type
   EZlibError = class(Exception);
diff --git a/compat/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs b/compat/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs
index 788b2fc..c1230bf 100644
--- a/compat/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs
+++ b/compat/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs
@@ -61,7 +61,7 @@ namespace DotZLib
         /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>

         /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>

         /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>

-        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one.

+        /// <remarks>All the other <c>Update</c> methods are implemented in terms of this one.

         /// This is therefore the only method a derived class has to implement</remarks>

         public abstract void Update(byte[] data, int offset, int count);

 

diff --git a/compat/zlib/contrib/dotzlib/DotZLib/CodecBase.cs b/compat/zlib/contrib/dotzlib/DotZLib/CodecBase.cs
index 42e6da3..c4bc8b8 100644
--- a/compat/zlib/contrib/dotzlib/DotZLib/CodecBase.cs
+++ b/compat/zlib/contrib/dotzlib/DotZLib/CodecBase.cs
@@ -139,7 +139,7 @@ namespace DotZLib
         /// <remarks>This must be implemented by a derived class</remarks>

         protected abstract void CleanUp();

 

-        // performs the release of the handles and calls the dereived CleanUp()

+        // performs the release of the handles and calls the derived CleanUp()

         private void CleanUp(bool isDisposing)

         {

             if (!_isDisposed)

@@ -160,7 +160,7 @@ namespace DotZLib
         #region Helper methods

 

         /// <summary>

-        /// Copies a number of bytes to the internal codec buffer - ready for proccesing

+        /// Copies a number of bytes to the internal codec buffer - ready for processing

         /// </summary>

         /// <param name="data">The byte array that contains the data to copy</param>

         /// <param name="startIndex">The index of the first byte to copy</param>

diff --git a/compat/zlib/contrib/dotzlib/DotZLib/GZipStream.cs b/compat/zlib/contrib/dotzlib/DotZLib/GZipStream.cs
index b161300..58091d3 100644
--- a/compat/zlib/contrib/dotzlib/DotZLib/GZipStream.cs
+++ b/compat/zlib/contrib/dotzlib/DotZLib/GZipStream.cs
@@ -246,7 +246,7 @@ namespace DotZLib
         }

 

         /// <summary>

-        ///  Not suppported.

+        ///  Not supported.

         /// </summary>

         /// <param name="offset"></param>

         /// <param name="origin"></param>

@@ -268,7 +268,7 @@ namespace DotZLib
         }

 

         /// <summary>

-        /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.

+        /// Gets/sets the current position in the <c>GZipStream</c>. Not supported.

         /// </summary>

         /// <remarks>In this implementation this property is not supported</remarks>

         /// <exception cref="NotSupportedException">Always thrown</exception>

@@ -285,7 +285,7 @@ namespace DotZLib
         }

 

         /// <summary>

-        /// Gets the size of the stream. Not suppported.

+        /// Gets the size of the stream. Not supported.

         /// </summary>

         /// <remarks>In this implementation this property is not supported</remarks>

         /// <exception cref="NotSupportedException">Always thrown</exception>

diff --git a/compat/zlib/contrib/dotzlib/DotZLib/UnitTests.cs b/compat/zlib/contrib/dotzlib/DotZLib/UnitTests.cs
index 16a0ebb..c5fce22 100644
--- a/compat/zlib/contrib/dotzlib/DotZLib/UnitTests.cs
+++ b/compat/zlib/contrib/dotzlib/DotZLib/UnitTests.cs
@@ -156,7 +156,7 @@ namespace DotZLibTests
         public void Info_Version()

         {

             Info info = new Info();

-            Assert.AreEqual("1.2.13", Info.Version);

+            Assert.AreEqual("1.3.0", Info.Version);

             Assert.AreEqual(32, info.SizeOfUInt);

             Assert.AreEqual(32, info.SizeOfULong);

             Assert.AreEqual(32, info.SizeOfPointer);

diff --git a/compat/zlib/contrib/dotzlib/readme.txt b/compat/zlib/contrib/dotzlib/readme.txt
index b239572..47454fc 100644
--- a/compat/zlib/contrib/dotzlib/readme.txt
+++ b/compat/zlib/contrib/dotzlib/readme.txt
@@ -36,7 +36,7 @@ Build instructions:
    in the same directory as the DotZLib.build file.

    You can define 2 properties on the nant command-line to control the build:

    debug={true|false} to toggle between release/debug builds (default=true).

-   nunit={true|false} to include or esclude unit tests (default=true).

+   nunit={true|false} to include or exclude unit tests (default=true).

    Also the target clean will remove binaries.

    Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release

    or ./DotZLib/bin/debug, depending on whether you are building the release

diff --git a/compat/zlib/contrib/infback9/infback9.c b/compat/zlib/contrib/infback9/infback9.c
index 05fb3e3..742a392 100644
--- a/compat/zlib/contrib/infback9/infback9.c
+++ b/compat/zlib/contrib/infback9/infback9.c
@@ -16,12 +16,8 @@
 
    window is a user-supplied window and output buffer that is 64K bytes.
  */
-int ZEXPORT inflateBack9Init_(strm, window, version, stream_size)
-z_stream FAR *strm;
-unsigned char FAR *window;
-const char *version;
-int stream_size;
-{
+int ZEXPORT inflateBack9Init_(z_stream FAR *strm, unsigned char FAR *window,
+                              const char *version, int stream_size) {
     struct inflate_state FAR *state;
 
     if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
@@ -51,8 +47,7 @@ int stream_size;
 #ifdef MAKEFIXED
 #include <stdio.h>
 
-void makefixed9(void)
-{
+void makefixed9(void) {
     unsigned sym, bits, low, size;
     code *next, *lenfix, *distfix;
     struct inflate_state state;
@@ -214,13 +209,8 @@ void makefixed9(void)
    inflateBack() can also return Z_STREAM_ERROR if the input parameters
    are not correct, i.e. strm is Z_NULL or the state was not initialized.
  */
-int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc)
-z_stream FAR *strm;
-in_func in;
-void FAR *in_desc;
-out_func out;
-void FAR *out_desc;
-{
+int ZEXPORT inflateBack9(z_stream FAR *strm, in_func in, void FAR *in_desc,
+                         out_func out, void FAR *out_desc) {
     struct inflate_state FAR *state;
     z_const unsigned char FAR *next;    /* next input */
     unsigned char FAR *put;     /* next output */
@@ -603,9 +593,7 @@ void FAR *out_desc;
     return ret;
 }
 
-int ZEXPORT inflateBack9End(strm)
-z_stream FAR *strm;
-{
+int ZEXPORT inflateBack9End(z_stream FAR *strm) {
     if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
         return Z_STREAM_ERROR;
     ZFREE(strm, strm->state);
diff --git a/compat/zlib/contrib/infback9/infback9.h b/compat/zlib/contrib/infback9/infback9.h
index 1073c0a..8371b4e 100644
--- a/compat/zlib/contrib/infback9/infback9.h
+++ b/compat/zlib/contrib/infback9/infback9.h
@@ -20,14 +20,14 @@
 extern "C" {
 #endif
 
-ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
-                                    in_func in, void FAR *in_desc,
-                                    out_func out, void FAR *out_desc));
-ZEXTERN int ZEXPORT inflateBack9End OF((z_stream FAR *strm));
-ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
-                                         unsigned char FAR *window,
-                                         const char *version,
-                                         int stream_size));
+ZEXTERN int ZEXPORT inflateBack9(z_stream FAR *strm,
+                                 in_func in, void FAR *in_desc,
+                                 out_func out, void FAR *out_desc);
+ZEXTERN int ZEXPORT inflateBack9End(z_stream FAR *strm);
+ZEXTERN int ZEXPORT inflateBack9Init_(z_stream FAR *strm,
+                                      unsigned char FAR *window,
+                                      const char *version,
+                                      int stream_size);
 #define inflateBack9Init(strm, window) \
         inflateBack9Init_((strm), (window), \
         ZLIB_VERSION, sizeof(z_stream))
diff --git a/compat/zlib/contrib/infback9/inftree9.c b/compat/zlib/contrib/infback9/inftree9.c
index 10827a6..dc38f24 100644
--- a/compat/zlib/contrib/infback9/inftree9.c
+++ b/compat/zlib/contrib/infback9/inftree9.c
@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2022 Mark Adler
+ * Copyright (C) 1995-2023 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.13 Copyright 1995-2022 Mark Adler ";
+   " inflate9 1.3 Copyright 1995-2023 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -29,14 +29,9 @@ const char inflate9_copyright[] =
    table index bits.  It will differ if the request is greater than the
    longest code or if it is less than the shortest code.
  */
-int inflate_table9(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
-{
+int inflate_table9(codetype type, unsigned short FAR *lens, unsigned codes,
+                   code FAR * FAR *table, unsigned FAR *bits,
+                   unsigned short FAR *work) {
     unsigned len;               /* a code's length in bits */
     unsigned sym;               /* index of code symbols */
     unsigned min, max;          /* minimum and maximum code lengths */
@@ -64,7 +59,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 194, 65};
+        133, 133, 133, 133, 144, 198, 203};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
diff --git a/compat/zlib/contrib/infback9/inftree9.h b/compat/zlib/contrib/infback9/inftree9.h
index 3b39497..2c1252f 100644
--- a/compat/zlib/contrib/infback9/inftree9.h
+++ b/compat/zlib/contrib/infback9/inftree9.h
@@ -56,6 +56,6 @@ typedef enum {
     DISTS
 } codetype;
 
-extern int inflate_table9 OF((codetype type, unsigned short FAR *lens,
-                             unsigned codes, code FAR * FAR *table,
-                             unsigned FAR *bits, unsigned short FAR *work));
+extern int inflate_table9(codetype type, unsigned short FAR *lens,
+                          unsigned codes, code FAR * FAR *table,
+                          unsigned FAR *bits, unsigned short FAR *work);
diff --git a/compat/zlib/contrib/minizip/MiniZip64_Changes.txt b/compat/zlib/contrib/minizip/MiniZip64_Changes.txt
index 13a1bd9..3759468 100644
--- a/compat/zlib/contrib/minizip/MiniZip64_Changes.txt
+++ b/compat/zlib/contrib/minizip/MiniZip64_Changes.txt
@@ -1,5 +1,5 @@
 
-MiniZip 1.1 was derrived from MiniZip at version 1.01f
+MiniZip 1.1 was derived from MiniZip at version 1.01f
 
 Change in 1.0 (Okt 2009)
  - **TODO - Add history**
diff --git a/compat/zlib/contrib/minizip/configure.ac b/compat/zlib/contrib/minizip/configure.ac
index bff300b..df80e5b 100644
--- a/compat/zlib/contrib/minizip/configure.ac
+++ b/compat/zlib/contrib/minizip/configure.ac
@@ -1,7 +1,7 @@
 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 
-AC_INIT([minizip], [1.2.13], [bugzilla.redhat.com])
+AC_INIT([minizip], [1.3.0], [bugzilla.redhat.com])
 AC_CONFIG_SRCDIR([minizip.c])
 AM_INIT_AUTOMAKE([foreign])
 LT_INIT
diff --git a/compat/zlib/contrib/minizip/crypt.h b/compat/zlib/contrib/minizip/crypt.h
index 1cc41f1..f4b93b7 100644
--- a/compat/zlib/contrib/minizip/crypt.h
+++ b/compat/zlib/contrib/minizip/crypt.h
@@ -32,8 +32,7 @@
 /***********************************************************************
  * Return the next byte in the pseudo-random sequence
  */
-static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab)
-{
+static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab) {
     unsigned temp;  /* POTENTIAL BUG:  temp*(temp^1) may overflow in an
                      * unpredictable manner on 16-bit systems; not a problem
                      * with any known compiler so far, though */
@@ -46,8 +45,7 @@ static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab)
 /***********************************************************************
  * Update the encryption keys with the next byte of plain text
  */
-static int update_keys(unsigned long* pkeys,const z_crc_t* pcrc_32_tab,int c)
-{
+static int update_keys(unsigned long* pkeys, const z_crc_t* pcrc_32_tab, int c) {
     (*(pkeys+0)) = CRC32((*(pkeys+0)), c);
     (*(pkeys+1)) += (*(pkeys+0)) & 0xff;
     (*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1;
@@ -63,8 +61,7 @@ static int update_keys(unsigned long* pkeys,const z_crc_t* pcrc_32_tab,int c)
  * Initialize the encryption keys and the random header according to
  * the given password.
  */
-static void init_keys(const char* passwd,unsigned long* pkeys,const z_crc_t* pcrc_32_tab)
-{
+static void init_keys(const char* passwd, unsigned long* pkeys, const z_crc_t* pcrc_32_tab) {
     *(pkeys+0) = 305419896L;
     *(pkeys+1) = 591751049L;
     *(pkeys+2) = 878082192L;
@@ -93,8 +90,7 @@ static unsigned crypthead(const char* passwd,       /* password string */
                           int bufSize,
                           unsigned long* pkeys,
                           const z_crc_t* pcrc_32_tab,
-                          unsigned long crcForCrypting)
-{
+                          unsigned long crcForCrypting) {
     unsigned n;                  /* index in random header */
     int t;                       /* temporary */
     int c;                       /* random byte */
diff --git a/compat/zlib/contrib/minizip/ioapi.c b/compat/zlib/contrib/minizip/ioapi.c
index 9370ae2..2b899c0 100644
--- a/compat/zlib/contrib/minizip/ioapi.c
+++ b/compat/zlib/contrib/minizip/ioapi.c
@@ -18,7 +18,7 @@
 #define FOPEN_FUNC(filename, mode) fopen(filename, mode)
 #define FTELLO_FUNC(stream) _ftelli64(stream)
 #define FSEEKO_FUNC(stream, offset, origin) _fseeki64(stream, offset, origin)
-#elif defined(__APPLE__) || defined(IOAPI_NO_64)
+#elif defined(__APPLE__) || defined(IOAPI_NO_64) || defined(__HAIKU__) || defined(MINIZIP_FOPEN_NO_64)
 // In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
 #define FOPEN_FUNC(filename, mode) fopen(filename, mode)
 #define FTELLO_FUNC(stream) ftello(stream)
@@ -32,8 +32,7 @@
 
 #include "ioapi.h"
 
-voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
-{
+voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc, const void*filename, int mode) {
     if (pfilefunc->zfile_func64.zopen64_file != NULL)
         return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode);
     else
@@ -42,8 +41,7 @@ voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename
     }
 }
 
-long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)
-{
+long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin) {
     if (pfilefunc->zfile_func64.zseek64_file != NULL)
         return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin);
     else
@@ -56,8 +54,7 @@ long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZP
     }
 }
 
-ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)
-{
+ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc, voidpf filestream) {
     if (pfilefunc->zfile_func64.zseek64_file != NULL)
         return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream);
     else
@@ -70,11 +67,9 @@ ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream
     }
 }
 
-void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32)
-{
+void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32, const zlib_filefunc_def* p_filefunc32) {
     p_filefunc64_32->zfile_func64.zopen64_file = NULL;
     p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file;
-    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
     p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file;
     p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file;
     p_filefunc64_32->zfile_func64.ztell64_file = NULL;
@@ -88,16 +83,7 @@ void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filef
 
 
 
-static voidpf  ZCALLBACK fopen_file_func OF((voidpf opaque, const char* filename, int mode));
-static uLong   ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size));
-static uLong   ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size));
-static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream));
-static long    ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
-static int     ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream));
-static int     ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream));
-
-static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode)
-{
+static voidpf ZCALLBACK fopen_file_func(voidpf opaque, const char* filename, int mode) {
     FILE* file = NULL;
     const char* mode_fopen = NULL;
     (void)opaque;
@@ -115,8 +101,7 @@ static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, in
     return file;
 }
 
-static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode)
-{
+static voidpf ZCALLBACK fopen64_file_func(voidpf opaque, const void* filename, int mode) {
     FILE* file = NULL;
     const char* mode_fopen = NULL;
     (void)opaque;
@@ -135,24 +120,21 @@ static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename,
 }
 
 
-static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size)
-{
+static uLong ZCALLBACK fread_file_func(voidpf opaque, voidpf stream, void* buf, uLong size) {
     uLong ret;
     (void)opaque;
     ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
 }
 
-static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size)
-{
+static uLong ZCALLBACK fwrite_file_func(voidpf opaque, voidpf stream, const void* buf, uLong size) {
     uLong ret;
     (void)opaque;
     ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
 }
 
-static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
-{
+static long ZCALLBACK ftell_file_func(voidpf opaque, voidpf stream) {
     long ret;
     (void)opaque;
     ret = ftell((FILE *)stream);
@@ -160,16 +142,14 @@ static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 }
 
 
-static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
-{
+static ZPOS64_T ZCALLBACK ftell64_file_func(voidpf opaque, voidpf stream) {
     ZPOS64_T ret;
     (void)opaque;
     ret = (ZPOS64_T)FTELLO_FUNC((FILE *)stream);
     return ret;
 }
 
-static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offset, int origin)
-{
+static long ZCALLBACK fseek_file_func(voidpf opaque, voidpf stream, uLong offset, int origin) {
     int fseek_origin=0;
     long ret;
     (void)opaque;
@@ -192,8 +172,7 @@ static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offs
     return ret;
 }
 
-static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T offset, int origin)
-{
+static long ZCALLBACK fseek64_file_func(voidpf opaque, voidpf stream, ZPOS64_T offset, int origin) {
     int fseek_origin=0;
     long ret;
     (void)opaque;
@@ -212,32 +191,28 @@ static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T
     }
     ret = 0;
 
-    if(FSEEKO_FUNC((FILE *)stream, (z_off_t)offset, fseek_origin) != 0)
+    if(FSEEKO_FUNC((FILE *)stream, (z_off64_t)offset, fseek_origin) != 0)
                         ret = -1;
 
     return ret;
 }
 
 
-static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
-{
+static int ZCALLBACK fclose_file_func(voidpf opaque, voidpf stream) {
     int ret;
     (void)opaque;
     ret = fclose((FILE *)stream);
     return ret;
 }
 
-static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream)
-{
+static int ZCALLBACK ferror_file_func(voidpf opaque, voidpf stream) {
     int ret;
     (void)opaque;
     ret = ferror((FILE *)stream);
     return ret;
 }
 
-void fill_fopen_filefunc (pzlib_filefunc_def)
-  zlib_filefunc_def* pzlib_filefunc_def;
-{
+void fill_fopen_filefunc(zlib_filefunc_def* pzlib_filefunc_def) {
     pzlib_filefunc_def->zopen_file = fopen_file_func;
     pzlib_filefunc_def->zread_file = fread_file_func;
     pzlib_filefunc_def->zwrite_file = fwrite_file_func;
@@ -248,8 +223,7 @@ void fill_fopen_filefunc (pzlib_filefunc_def)
     pzlib_filefunc_def->opaque = NULL;
 }
 
-void fill_fopen64_filefunc (zlib_filefunc64_def*  pzlib_filefunc_def)
-{
+void fill_fopen64_filefunc(zlib_filefunc64_def* pzlib_filefunc_def) {
     pzlib_filefunc_def->zopen64_file = fopen64_file_func;
     pzlib_filefunc_def->zread_file = fread_file_func;
     pzlib_filefunc_def->zwrite_file = fwrite_file_func;
diff --git a/compat/zlib/contrib/minizip/ioapi.h b/compat/zlib/contrib/minizip/ioapi.h
index ae9ca7e..c588a18 100644
--- a/compat/zlib/contrib/minizip/ioapi.h
+++ b/compat/zlib/contrib/minizip/ioapi.h
@@ -50,7 +50,7 @@
 #define ftello64 ftell
 #define fseeko64 fseek
 #else
-#if defined(__FreeBSD__) || defined(__OpenBSD__) || defined(__NetBSD__)
+#if defined(__FreeBSD__) || defined(__OpenBSD__) || defined(__NetBSD__) || defined(__HAIKU__) || defined(MINIZIP_FOPEN_NO_64)
 #define fopen64 fopen
 #define ftello64 ftello
 #define fseeko64 fseeko
@@ -82,7 +82,7 @@
 #include "mz64conf.h"
 #endif
 
-/* a type choosen by DEFINE */
+/* a type chosen by DEFINE */
 #ifdef HAVE_64BIT_INT_CUSTOM
 typedef  64BIT_INT_CUSTOM_TYPE ZPOS64_T;
 #else
@@ -134,14 +134,14 @@ extern "C" {
 
 
 
-typedef voidpf   (ZCALLBACK *open_file_func)      OF((voidpf opaque, const char* filename, int mode));
-typedef uLong    (ZCALLBACK *read_file_func)      OF((voidpf opaque, voidpf stream, void* buf, uLong size));
-typedef uLong    (ZCALLBACK *write_file_func)     OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
-typedef int      (ZCALLBACK *close_file_func)     OF((voidpf opaque, voidpf stream));
-typedef int      (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
+typedef voidpf   (ZCALLBACK *open_file_func)      (voidpf opaque, const char* filename, int mode);
+typedef uLong    (ZCALLBACK *read_file_func)      (voidpf opaque, voidpf stream, void* buf, uLong size);
+typedef uLong    (ZCALLBACK *write_file_func)     (voidpf opaque, voidpf stream, const void* buf, uLong size);
+typedef int      (ZCALLBACK *close_file_func)     (voidpf opaque, voidpf stream);
+typedef int      (ZCALLBACK *testerror_file_func) (voidpf opaque, voidpf stream);
 
-typedef long     (ZCALLBACK *tell_file_func)      OF((voidpf opaque, voidpf stream));
-typedef long     (ZCALLBACK *seek_file_func)      OF((voidpf opaque, voidpf stream, uLong offset, int origin));
+typedef long     (ZCALLBACK *tell_file_func)      (voidpf opaque, voidpf stream);
+typedef long     (ZCALLBACK *seek_file_func)      (voidpf opaque, voidpf stream, uLong offset, int origin);
 
 
 /* here is the "old" 32 bits structure structure */
@@ -157,9 +157,9 @@ typedef struct zlib_filefunc_def_s
     voidpf              opaque;
 } zlib_filefunc_def;
 
-typedef ZPOS64_T (ZCALLBACK *tell64_file_func)    OF((voidpf opaque, voidpf stream));
-typedef long     (ZCALLBACK *seek64_file_func)    OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
-typedef voidpf   (ZCALLBACK *open64_file_func)    OF((voidpf opaque, const void* filename, int mode));
+typedef ZPOS64_T (ZCALLBACK *tell64_file_func)    (voidpf opaque, voidpf stream);
+typedef long     (ZCALLBACK *seek64_file_func)    (voidpf opaque, voidpf stream, ZPOS64_T offset, int origin);
+typedef voidpf   (ZCALLBACK *open64_file_func)    (voidpf opaque, const void* filename, int mode);
 
 typedef struct zlib_filefunc64_def_s
 {
@@ -173,8 +173,8 @@ typedef struct zlib_filefunc64_def_s
     voidpf              opaque;
 } zlib_filefunc64_def;
 
-void fill_fopen64_filefunc OF((zlib_filefunc64_def* pzlib_filefunc_def));
-void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+void fill_fopen64_filefunc(zlib_filefunc64_def* pzlib_filefunc_def);
+void fill_fopen_filefunc(zlib_filefunc_def* pzlib_filefunc_def);
 
 /* now internal definition, only for zip.c and unzip.h */
 typedef struct zlib_filefunc64_32_def_s
@@ -193,11 +193,11 @@ typedef struct zlib_filefunc64_32_def_s
 #define ZCLOSE64(filefunc,filestream)             ((*((filefunc).zfile_func64.zclose_file))  ((filefunc).zfile_func64.opaque,filestream))
 #define ZERROR64(filefunc,filestream)             ((*((filefunc).zfile_func64.zerror_file))  ((filefunc).zfile_func64.opaque,filestream))
 
-voidpf call_zopen64 OF((const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode));
-long    call_zseek64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin));
-ZPOS64_T call_ztell64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream));
+voidpf call_zopen64(const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode);
+long call_zseek64(const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin);
+ZPOS64_T call_ztell64(const zlib_filefunc64_32_def* pfilefunc,voidpf filestream);
 
-void    fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32);
+void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32);
 
 #define ZOPEN64(filefunc,filename,mode)         (call_zopen64((&(filefunc)),(filename),(mode)))
 #define ZTELL64(filefunc,filestream)            (call_ztell64((&(filefunc)),(filestream)))
diff --git a/compat/zlib/contrib/minizip/iowin32.c b/compat/zlib/contrib/minizip/iowin32.c
index 7df5251..08536e9 100644
--- a/compat/zlib/contrib/minizip/iowin32.c
+++ b/compat/zlib/contrib/minizip/iowin32.c
@@ -38,14 +38,6 @@
 #endif
 #endif
 
-voidpf  ZCALLBACK win32_open_file_func  OF((voidpf opaque, const char* filename, int mode));
-uLong   ZCALLBACK win32_read_file_func  OF((voidpf opaque, voidpf stream, void* buf, uLong size));
-uLong   ZCALLBACK win32_write_file_func OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
-ZPOS64_T ZCALLBACK win32_tell64_file_func  OF((voidpf opaque, voidpf stream));
-long    ZCALLBACK win32_seek64_file_func  OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
-int     ZCALLBACK win32_close_file_func OF((voidpf opaque, voidpf stream));
-int     ZCALLBACK win32_error_file_func OF((voidpf opaque, voidpf stream));
-
 typedef struct
 {
     HANDLE hf;
@@ -57,8 +49,7 @@ static void win32_translate_open_mode(int mode,
                                       DWORD* lpdwDesiredAccess,
                                       DWORD* lpdwCreationDisposition,
                                       DWORD* lpdwShareMode,
-                                      DWORD* lpdwFlagsAndAttributes)
-{
+                                      DWORD* lpdwFlagsAndAttributes) {
     *lpdwDesiredAccess = *lpdwShareMode = *lpdwFlagsAndAttributes = *lpdwCreationDisposition = 0;
 
     if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
@@ -79,8 +70,7 @@ static void win32_translate_open_mode(int mode,
     }
 }
 
-static voidpf win32_build_iowin(HANDLE hFile)
-{
+static voidpf win32_build_iowin(HANDLE hFile) {
     voidpf ret=NULL;
 
     if ((hFile != NULL) && (hFile != INVALID_HANDLE_VALUE))
@@ -98,8 +88,7 @@ static voidpf win32_build_iowin(HANDLE hFile)
     return ret;
 }
 
-voidpf ZCALLBACK win32_open64_file_func (voidpf opaque,const void* filename,int mode)
-{
+voidpf ZCALLBACK win32_open64_file_func(voidpf opaque, const void* filename, int mode) {
     const char* mode_fopen = NULL;
     DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
     HANDLE hFile = NULL;
@@ -127,8 +116,7 @@ voidpf ZCALLBACK win32_open64_file_func (voidpf opaque,const void* filename,int
 }
 
 
-voidpf ZCALLBACK win32_open64_file_funcA (voidpf opaque,const void* filename,int mode)
-{
+voidpf ZCALLBACK win32_open64_file_funcA(voidpf opaque, const void* filename, int mode) {
     const char* mode_fopen = NULL;
     DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
     HANDLE hFile = NULL;
@@ -151,8 +139,7 @@ voidpf ZCALLBACK win32_open64_file_funcA (voidpf opaque,const void* filename,int
 }
 
 
-voidpf ZCALLBACK win32_open64_file_funcW (voidpf opaque,const void* filename,int mode)
-{
+voidpf ZCALLBACK win32_open64_file_funcW(voidpf opaque, const void* filename, int mode) {
     const char* mode_fopen = NULL;
     DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
     HANDLE hFile = NULL;
@@ -171,8 +158,7 @@ voidpf ZCALLBACK win32_open64_file_funcW (voidpf opaque,const void* filename,int
 }
 
 
-voidpf ZCALLBACK win32_open_file_func (voidpf opaque,const char* filename,int mode)
-{
+voidpf ZCALLBACK win32_open_file_func(voidpf opaque, const char* filename, int mode) {
     const char* mode_fopen = NULL;
     DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
     HANDLE hFile = NULL;
@@ -200,8 +186,7 @@ voidpf ZCALLBACK win32_open_file_func (voidpf opaque,const char* filename,int mo
 }
 
 
-uLong ZCALLBACK win32_read_file_func (voidpf opaque, voidpf stream, void* buf,uLong size)
-{
+uLong ZCALLBACK win32_read_file_func(voidpf opaque, voidpf stream, void* buf,uLong size) {
     uLong ret=0;
     HANDLE hFile = NULL;
     if (stream!=NULL)
@@ -222,8 +207,7 @@ uLong ZCALLBACK win32_read_file_func (voidpf opaque, voidpf stream, void* buf,uL
 }
 
 
-uLong ZCALLBACK win32_write_file_func (voidpf opaque,voidpf stream,const void* buf,uLong size)
-{
+uLong ZCALLBACK win32_write_file_func(voidpf opaque, voidpf stream, const void* buf, uLong size) {
     uLong ret=0;
     HANDLE hFile = NULL;
     if (stream!=NULL)
@@ -243,8 +227,7 @@ uLong ZCALLBACK win32_write_file_func (voidpf opaque,voidpf stream,const void* b
     return ret;
 }
 
-static BOOL MySetFilePointerEx(HANDLE hFile, LARGE_INTEGER pos, LARGE_INTEGER *newPos,  DWORD dwMoveMethod)
-{
+static BOOL MySetFilePointerEx(HANDLE hFile, LARGE_INTEGER pos, LARGE_INTEGER *newPos, DWORD dwMoveMethod) {
 #ifdef IOWIN32_USING_WINRT_API
     return SetFilePointerEx(hFile, pos, newPos, dwMoveMethod);
 #else
@@ -263,8 +246,7 @@ static BOOL MySetFilePointerEx(HANDLE hFile, LARGE_INTEGER pos, LARGE_INTEGER *n
 #endif
 }
 
-long ZCALLBACK win32_tell_file_func (voidpf opaque,voidpf stream)
-{
+long ZCALLBACK win32_tell_file_func(voidpf opaque, voidpf stream) {
     long ret=-1;
     HANDLE hFile = NULL;
     if (stream!=NULL)
@@ -286,8 +268,7 @@ long ZCALLBACK win32_tell_file_func (voidpf opaque,voidpf stream)
     return ret;
 }
 
-ZPOS64_T ZCALLBACK win32_tell64_file_func (voidpf opaque, voidpf stream)
-{
+ZPOS64_T ZCALLBACK win32_tell64_file_func(voidpf opaque, voidpf stream) {
     ZPOS64_T ret= (ZPOS64_T)-1;
     HANDLE hFile = NULL;
     if (stream!=NULL)
@@ -311,8 +292,7 @@ ZPOS64_T ZCALLBACK win32_tell64_file_func (voidpf opaque, voidpf stream)
 }
 
 
-long ZCALLBACK win32_seek_file_func (voidpf opaque,voidpf stream,uLong offset,int origin)
-{
+long ZCALLBACK win32_seek_file_func(voidpf opaque, voidpf stream, uLong offset, int origin) {
     DWORD dwMoveMethod=0xFFFFFFFF;
     HANDLE hFile = NULL;
 
@@ -349,8 +329,7 @@ long ZCALLBACK win32_seek_file_func (voidpf opaque,voidpf stream,uLong offset,in
     return ret;
 }
 
-long ZCALLBACK win32_seek64_file_func (voidpf opaque, voidpf stream,ZPOS64_T offset,int origin)
-{
+long ZCALLBACK win32_seek64_file_func(voidpf opaque, voidpf stream, ZPOS64_T offset, int origin) {
     DWORD dwMoveMethod=0xFFFFFFFF;
     HANDLE hFile = NULL;
     long ret=-1;
@@ -388,8 +367,7 @@ long ZCALLBACK win32_seek64_file_func (voidpf opaque, voidpf stream,ZPOS64_T off
     return ret;
 }
 
-int ZCALLBACK win32_close_file_func (voidpf opaque, voidpf stream)
-{
+int ZCALLBACK win32_close_file_func(voidpf opaque, voidpf stream) {
     int ret=-1;
 
     if (stream!=NULL)
@@ -406,8 +384,7 @@ int ZCALLBACK win32_close_file_func (voidpf opaque, voidpf stream)
     return ret;
 }
 
-int ZCALLBACK win32_error_file_func (voidpf opaque,voidpf stream)
-{
+int ZCALLBACK win32_error_file_func(voidpf opaque, voidpf stream) {
     int ret=-1;
     if (stream!=NULL)
     {
@@ -416,8 +393,7 @@ int ZCALLBACK win32_error_file_func (voidpf opaque,voidpf stream)
     return ret;
 }
 
-void fill_win32_filefunc (zlib_filefunc_def* pzlib_filefunc_def)
-{
+void fill_win32_filefunc(zlib_filefunc_def* pzlib_filefunc_def) {
     pzlib_filefunc_def->zopen_file = win32_open_file_func;
     pzlib_filefunc_def->zread_file = win32_read_file_func;
     pzlib_filefunc_def->zwrite_file = win32_write_file_func;
@@ -428,8 +404,7 @@ void fill_win32_filefunc (zlib_filefunc_def* pzlib_filefunc_def)
     pzlib_filefunc_def->opaque = NULL;
 }
 
-void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def)
-{
+void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def) {
     pzlib_filefunc_def->zopen64_file = win32_open64_file_func;
     pzlib_filefunc_def->zread_file = win32_read_file_func;
     pzlib_filefunc_def->zwrite_file = win32_write_file_func;
@@ -441,8 +416,7 @@ void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def)
 }
 
 
-void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def)
-{
+void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def) {
     pzlib_filefunc_def->zopen64_file = win32_open64_file_funcA;
     pzlib_filefunc_def->zread_file = win32_read_file_func;
     pzlib_filefunc_def->zwrite_file = win32_write_file_func;
@@ -454,8 +428,7 @@ void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def)
 }
 
 
-void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def)
-{
+void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def) {
     pzlib_filefunc_def->zopen64_file = win32_open64_file_funcW;
     pzlib_filefunc_def->zread_file = win32_read_file_func;
     pzlib_filefunc_def->zwrite_file = win32_write_file_func;
diff --git a/compat/zlib/contrib/minizip/iowin32.h b/compat/zlib/contrib/minizip/iowin32.h
index 0ca0969..a23a65d 100644
--- a/compat/zlib/contrib/minizip/iowin32.h
+++ b/compat/zlib/contrib/minizip/iowin32.h
@@ -18,10 +18,10 @@
 extern "C" {
 #endif
 
-void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
-void fill_win32_filefunc64 OF((zlib_filefunc64_def* pzlib_filefunc_def));
-void fill_win32_filefunc64A OF((zlib_filefunc64_def* pzlib_filefunc_def));
-void fill_win32_filefunc64W OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc(zlib_filefunc_def* pzlib_filefunc_def);
+void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def);
+void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def);
+void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def);
 
 #ifdef __cplusplus
 }
diff --git a/compat/zlib/contrib/minizip/miniunz.c b/compat/zlib/contrib/minizip/miniunz.c
index 0dc9b50..a12aec8 100644
--- a/compat/zlib/contrib/minizip/miniunz.c
+++ b/compat/zlib/contrib/minizip/miniunz.c
@@ -27,7 +27,7 @@
         #endif
 #endif
 
-#ifdef __APPLE__
+#if defined(__APPLE__) || defined(__HAIKU__) || defined(MINIZIP_FOPEN_NO_64)
 // In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
 #define FOPEN_FUNC(filename, mode) fopen(filename, mode)
 #define FTELLO_FUNC(stream) ftello(stream)
@@ -81,11 +81,7 @@
     filename : the filename of the file where date/time must be modified
     dosdate : the new date at the MSDos format (4 bytes)
     tmu_date : the SAME new date at the tm_unz format */
-static void change_file_date(filename,dosdate,tmu_date)
-    const char *filename;
-    uLong dosdate;
-    tm_unz tmu_date;
-{
+static void change_file_date(const char *filename, uLong dosdate, tm_unz tmu_date) {
 #ifdef _WIN32
   HANDLE hFile;
   FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
@@ -115,6 +111,10 @@ static void change_file_date(filename,dosdate,tmu_date)
 
   ut.actime=ut.modtime=mktime(&newdate);
   utime(filename,&ut);
+#else
+  (void)filename;
+  (void)dosdate;
+  (void)tmu_date;
 #endif
 #endif
 }
@@ -123,9 +123,7 @@ static void change_file_date(filename,dosdate,tmu_date)
 /* mymkdir and change_file_date are not 100 % portable
    As I don't know well Unix, I wait feedback for the unix portion */
 
-static int mymkdir(dirname)
-    const char* dirname;
-{
+static int mymkdir(const char* dirname) {
     int ret=0;
 #ifdef _WIN32
     ret = _mkdir(dirname);
@@ -133,13 +131,13 @@ static int mymkdir(dirname)
     ret = mkdir (dirname,0775);
 #elif __APPLE__
     ret = mkdir (dirname,0775);
+#else
+    (void)dirname;
 #endif
     return ret;
 }
 
-static int makedir (newdir)
-    const char *newdir;
-{
+static int makedir(const char *newdir) {
   char *buffer ;
   char *p;
   size_t len = strlen(newdir);
@@ -187,14 +185,12 @@ static int makedir (newdir)
   return 1;
 }
 
-static void do_banner()
-{
+static void do_banner(void) {
     printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
     printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
 }
 
-static void do_help()
-{
+static void do_help(void) {
     printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
            "  -e  Extract without pathname (junk paths)\n" \
            "  -x  Extract with pathname\n" \
@@ -202,11 +198,10 @@ static void do_help()
            "  -l  list files\n" \
            "  -d  directory to extract into\n" \
            "  -o  overwrite files without prompting\n" \
-           "  -p  extract crypted file using password\n\n");
+           "  -p  extract encrypted file using password\n\n");
 }
 
-static void Display64BitsSize(ZPOS64_T n, int size_char)
-{
+static void Display64BitsSize(ZPOS64_T n, int size_char) {
   /* to avoid compatibility problem , we do here the conversion */
   char number[21];
   int offset=19;
@@ -233,9 +228,7 @@ static void Display64BitsSize(ZPOS64_T n, int size_char)
   printf("%s",&number[pos_string]);
 }
 
-static int do_list(uf)
-    unzFile uf;
-{
+static int do_list(unzFile uf) {
     uLong i;
     unz_global_info64 gi;
     int err;
@@ -250,7 +243,7 @@ static int do_list(uf)
         char filename_inzip[256];
         unz_file_info64 file_info;
         uLong ratio=0;
-        const char *string_method;
+        const char *string_method = "";
         char charCrypt=' ';
         err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
         if (err!=UNZ_OK)
@@ -261,7 +254,7 @@ static int do_list(uf)
         if (file_info.uncompressed_size>0)
             ratio = (uLong)((file_info.compressed_size*100)/file_info.uncompressed_size);
 
-        /* display a '*' if the file is crypted */
+        /* display a '*' if the file is encrypted */
         if ((file_info.flag & 1) != 0)
             charCrypt='*';
 
@@ -311,12 +304,7 @@ static int do_list(uf)
 }
 
 
-static int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
-    unzFile uf;
-    const int* popt_extract_without_path;
-    int* popt_overwrite;
-    const char* password;
-{
+static int do_extract_currentfile(unzFile uf, const int* popt_extract_without_path, int* popt_overwrite, const char* password) {
     char filename_inzip[256];
     char* filename_withoutpath;
     char* p;
@@ -473,12 +461,7 @@ static int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,pa
 }
 
 
-static int do_extract(uf,opt_extract_without_path,opt_overwrite,password)
-    unzFile uf;
-    int opt_extract_without_path;
-    int opt_overwrite;
-    const char* password;
-{
+static int do_extract(unzFile uf, int opt_extract_without_path, int opt_overwrite, const char* password) {
     uLong i;
     unz_global_info64 gi;
     int err;
@@ -508,13 +491,7 @@ static int do_extract(uf,opt_extract_without_path,opt_overwrite,password)
     return 0;
 }
 
-static int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite,password)
-    unzFile uf;
-    const char* filename;
-    int opt_extract_without_path;
-    int opt_overwrite;
-    const char* password;
-{
+static int do_extract_onefile(unzFile uf, const char* filename, int opt_extract_without_path, int opt_overwrite, const char* password) {
     if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
     {
         printf("file %s not found in the zipfile\n",filename);
@@ -530,10 +507,7 @@ static int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite
 }
 
 
-int main(argc,argv)
-    int argc;
-    char *argv[];
-{
+int main(int argc, char *argv[]) {
     const char *zipfilename=NULL;
     const char *filename_to_extract=NULL;
     const char *password=NULL;
@@ -606,7 +580,7 @@ int main(argc,argv)
 #        endif
 
         strncpy(filename_try, zipfilename,MAXFILENAME-1);
-        /* strncpy doesnt append the trailing NULL, of the string is too long. */
+        /* strncpy doesn't append the trailing NULL, of the string is too long. */
         filename_try[ MAXFILENAME ] = '\0';
 
 #        ifdef USEWIN32IOAPI
diff --git a/compat/zlib/contrib/minizip/minizip.c b/compat/zlib/contrib/minizip/minizip.c
index 0f0112b..33a0137 100644
--- a/compat/zlib/contrib/minizip/minizip.c
+++ b/compat/zlib/contrib/minizip/minizip.c
@@ -77,11 +77,9 @@
 #define MAXFILENAME (256)
 
 #ifdef _WIN32
-static int filetime(f, tmzip, dt)
-    const char *f;          /* name of file to get info on */
-    tm_zip *tmzip;             /* return value: access, modific. and creation times */
-    uLong *dt;             /* dostime */
-{
+/* f: name of file to get info on, tmzip: return value: access,
+   modification and creation times, dt: dostime */
+static int filetime(const char *f, tm_zip *tmzip, uLong *dt) {
   int ret = 0;
   {
       FILETIME ftLocal;
@@ -101,11 +99,9 @@ static int filetime(f, tmzip, dt)
 }
 #else
 #if defined(unix) || defined(__APPLE__)
-static int filetime(f, tmzip, dt)
-    const char *f;         /* name of file to get info on */
-    tm_zip *tmzip;         /* return value: access, modific. and creation times */
-    uLong *dt;             /* dostime */
-{
+/* f: name of file to get info on, tmzip: return value: access,
+   modification and creation times, dt: dostime */
+static int filetime(const char *f, tm_zip *tmzip, uLong *dt) {
   (void)dt;
   int ret=0;
   struct stat s;        /* results of stat() */
@@ -120,7 +116,7 @@ static int filetime(f, tmzip, dt)
       len = MAXFILENAME;
 
     strncpy(name, f,MAXFILENAME-1);
-    /* strncpy doesnt append the trailing NULL, of the string is too long. */
+    /* strncpy doesn't append the trailing NULL, of the string is too long. */
     name[ MAXFILENAME ] = '\0';
 
     if (name[len - 1] == '/')
@@ -144,11 +140,12 @@ static int filetime(f, tmzip, dt)
   return ret;
 }
 #else
-static int filetime(f, tmzip, dt)
-    const char *f;          /* name of file to get info on */
-    tm_zip *tmzip;             /* return value: access, modific. and creation times */
-    uLong *dt;             /* dostime */
-{
+/* f: name of file to get info on, tmzip: return value: access,
+   modification and creation times, dt: dostime */
+static int filetime(const char *f, tm_zip *tmzip, uLong *dt) {
+    (void)f;
+    (void)tmzip;
+    (void)dt;
     return 0;
 }
 #endif
@@ -157,9 +154,7 @@ static int filetime(f, tmzip, dt)
 
 
 
-static int check_exist_file(filename)
-    const char* filename;
-{
+static int check_exist_file(const char* filename) {
     FILE* ftestexist;
     int ret = 1;
     ftestexist = FOPEN_FUNC(filename,"rb");
@@ -170,14 +165,12 @@ static int check_exist_file(filename)
     return ret;
 }
 
-static void do_banner()
-{
+static void do_banner(void) {
     printf("MiniZip 1.1, demo of zLib + MiniZip64 package, written by Gilles Vollant\n");
     printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n");
 }
 
-static void do_help()
-{
+static void do_help(void) {
     printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] [-j] file.zip [files_to_add]\n\n" \
            "  -r  Scan directories recursively\n" \
            "  -o  Overwrite existing file.zip\n" \
@@ -190,14 +183,13 @@ static void do_help()
 
 /* calculate the CRC32 of a file,
    because to encrypt a file, we need known the CRC32 of the file before */
-static int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc)
-{
+static int getFileCrc(const char* filenameinzip, void* buf, unsigned long size_buf, unsigned long* result_crc) {
    unsigned long calculate_crc=0;
    int err=ZIP_OK;
    FILE * fin = FOPEN_FUNC(filenameinzip,"rb");
 
    unsigned long size_read = 0;
-   unsigned long total_read = 0;
+   /* unsigned long total_read = 0; */
    if (fin==NULL)
    {
        err = ZIP_ERRNO;
@@ -217,7 +209,7 @@ static int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,
 
             if (size_read>0)
                 calculate_crc = crc32_z(calculate_crc,buf,size_read);
-            total_read += size_read;
+            /* total_read += size_read; */
 
         } while ((err == ZIP_OK) && (size_read>0));
 
@@ -229,8 +221,7 @@ static int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,
     return err;
 }
 
-static int isLargeFile(const char* filename)
-{
+static int isLargeFile(const char* filename) {
   int largeFile = 0;
   ZPOS64_T pos = 0;
   FILE* pFile = FOPEN_FUNC(filename, "rb");
@@ -240,7 +231,7 @@ static int isLargeFile(const char* filename)
     FSEEKO_FUNC(pFile, 0, SEEK_END);
     pos = (ZPOS64_T)FTELLO_FUNC(pFile);
 
-                printf("File : %s is %lld bytes\n", filename, pos);
+                printf("File : %s is %llu bytes\n", filename, pos);
 
     if(pos >= 0xffffffff)
      largeFile = 1;
@@ -391,13 +382,10 @@ void addPathToZip(zipFile zf, const char *filenameinzip, const char *password, i
 }
 
 
-int main(argc,argv)
-    int argc;
-    char *argv[];
-{
+int main(int argc, char *argv[]) {
     int i;
     int opt_recursive=0;
-    int opt_overwrite=1;
+    int opt_overwrite=0;
     int opt_compress_level=Z_DEFAULT_COMPRESSION;
     int opt_exclude_path=0;
     int zipfilenamearg = 0;
@@ -425,7 +413,7 @@ int main(argc,argv)
 
                 while ((*p)!='\0')
                 {
-                    char c=*(p++);;
+                    char c=*(p++);
                     if ((c=='o') || (c=='O'))
                         opt_overwrite = 1;
                     if ((c=='a') || (c=='A'))
@@ -473,7 +461,7 @@ int main(argc,argv)
 
         zipok = 1 ;
         strncpy(filename_try, argv[zipfilenamearg],MAXFILENAME-1);
-        /* strncpy doesnt append the trailing NULL, of the string is too long. */
+        /* strncpy doesn't append the trailing NULL, of the string is too long. */
         filename_try[ MAXFILENAME ] = '\0';
 
         len=(int)strlen(filename_try);
diff --git a/compat/zlib/contrib/minizip/mztools.c b/compat/zlib/contrib/minizip/mztools.c
index 96891c2..c8d2375 100644
--- a/compat/zlib/contrib/minizip/mztools.c
+++ b/compat/zlib/contrib/minizip/mztools.c
@@ -27,13 +27,7 @@
   WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
 } while(0)
 
-extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
-const char* file;
-const char* fileOut;
-const char* fileOutTmp;
-uLong* nRecovered;
-uLong* bytesRecovered;
-{
+extern int ZEXPORT unzRepair(const char* file, const char* fileOut, const char* fileOutTmp, uLong* nRecovered, uLong* bytesRecovered) {
   int err = Z_OK;
   FILE* fpZip = fopen(file, "rb");
   FILE* fpOut = fopen(fileOut, "wb");
diff --git a/compat/zlib/contrib/minizip/unzip.c b/compat/zlib/contrib/minizip/unzip.c
index 3036b47..ed763f8 100644
--- a/compat/zlib/contrib/minizip/unzip.c
+++ b/compat/zlib/contrib/minizip/unzip.c
@@ -49,12 +49,12 @@
         Copyright (C) 2007-2008 Even Rouault
 
 
-        Oct-2009 - Mathias Svensson - Removed cpl_* from symbol names (Even Rouault added them but since this is now moved to a new project (minizip64) I renamed them again).
+  Oct-2009 - Mathias Svensson - Removed cpl_* from symbol names (Even Rouault added them but since this is now moved to a new project (minizip64) I renamed them again).
   Oct-2009 - Mathias Svensson - Fixed problem if uncompressed size was > 4G and compressed size was <4G
                                 should only read the compressed/uncompressed size from the Zip64 format if
                                 the size from normal header was 0xFFFFFFFF
-  Oct-2009 - Mathias Svensson - Applied some bug fixes from paches recived from Gilles Vollant
-        Oct-2009 - Mathias Svensson - Applied support to unzip files with compression mathod BZIP2 (bzip2 lib is required)
+  Oct-2009 - Mathias Svensson - Applied some bug fixes from patches received from Gilles Vollant
+  Oct-2009 - Mathias Svensson - Applied support to unzip files with compression method BZIP2 (bzip2 lib is required)
                                 Patch created by Daniel Borca
 
   Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer
@@ -77,8 +77,6 @@
 
 #ifdef STDC
 #  include <stddef.h>
-#  include <string.h>
-#  include <stdlib.h>
 #endif
 #ifdef NO_ERRNO_H
     extern int errno;
@@ -111,9 +109,6 @@
 #ifndef ALLOC
 # define ALLOC(size) (malloc(size))
 #endif
-#ifndef TRYFREE
-# define TRYFREE(p) { free(p);}
-#endif
 
 #define SIZECENTRALDIRITEM (0x2e)
 #define SIZEZIPLOCALHEADER (0x1e)
@@ -153,7 +148,7 @@ typedef struct
     ZPOS64_T rest_read_compressed; /* number of byte to be decompressed */
     ZPOS64_T rest_read_uncompressed;/*number of byte to be obtained after decomp*/
     zlib_filefunc64_32_def z_filefunc;
-    voidpf filestream;        /* io structore of the zipfile */
+    voidpf filestream;        /* io structure of the zipfile */
     uLong compression_method;   /* compression method (0==store) */
     ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
     int   raw;
@@ -166,7 +161,7 @@ typedef struct
 {
     zlib_filefunc64_32_def z_filefunc;
     int is64bitOpenFunction;
-    voidpf filestream;        /* io structore of the zipfile */
+    voidpf filestream;        /* io structure of the zipfile */
     unz_global_info64 gi;       /* public global information */
     ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
     ZPOS64_T num_file;             /* number of the current file in the zipfile*/
@@ -197,29 +192,24 @@ typedef struct
 #include "crypt.h"
 #endif
 
+
 /* ===========================================================================
-     Read a byte from a gz_stream; update next_in and avail_in. Return EOF
-   for end of file.
-   IN assertion: the stream s has been successfully opened for reading.
+   Reads a long in LSB order from the given gz_stream. Sets
 */
 
-
-local int unz64local_getByte OF((
-    const zlib_filefunc64_32_def* pzlib_filefunc_def,
-    voidpf filestream,
-    int *pi));
-
-local int unz64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi)
-{
-    unsigned char c;
-    int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1);
-    if (err==1)
+local int unz64local_getShort(const zlib_filefunc64_32_def* pzlib_filefunc_def,
+                              voidpf filestream,
+                              uLong *pX) {
+    unsigned char c[2];
+    int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,c,2);
+    if (err==2)
     {
-        *pi = (int)c;
+        *pX = c[0] | ((uLong)c[1] << 8);
         return UNZ_OK;
     }
     else
     {
+        *pX = 0;
         if (ZERROR64(*pzlib_filefunc_def,filestream))
             return UNZ_ERRNO;
         else
@@ -227,127 +217,50 @@ local int unz64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def, v
     }
 }
 
-
-/* ===========================================================================
-   Reads a long in LSB order from the given gz_stream. Sets
-*/
-local int unz64local_getShort OF((
-    const zlib_filefunc64_32_def* pzlib_filefunc_def,
-    voidpf filestream,
-    uLong *pX));
-
-local int unz64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def,
+local int unz64local_getLong(const zlib_filefunc64_32_def* pzlib_filefunc_def,
                              voidpf filestream,
-                             uLong *pX)
-{
-    uLong x ;
-    int i = 0;
-    int err;
-
-    err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x = (uLong)i;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((uLong)i)<<8;
-
-    if (err==UNZ_OK)
-        *pX = x;
-    else
-        *pX = 0;
-    return err;
-}
-
-local int unz64local_getLong OF((
-    const zlib_filefunc64_32_def* pzlib_filefunc_def,
-    voidpf filestream,
-    uLong *pX));
-
-local int unz64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def,
-                            voidpf filestream,
-                            uLong *pX)
-{
-    uLong x ;
-    int i = 0;
-    int err;
-
-    err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x = (uLong)i;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((uLong)i)<<8;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((uLong)i)<<16;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x += ((uLong)i)<<24;
-
-    if (err==UNZ_OK)
-        *pX = x;
+                             uLong *pX) {
+    unsigned char c[4];
+    int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,c,4);
+    if (err==4)
+    {
+        *pX = c[0] | ((uLong)c[1] << 8) | ((uLong)c[2] << 16) | ((uLong)c[3] << 24);
+        return UNZ_OK;
+    }
     else
+    {
         *pX = 0;
-    return err;
+        if (ZERROR64(*pzlib_filefunc_def,filestream))
+            return UNZ_ERRNO;
+        else
+            return UNZ_EOF;
+    }
 }
 
-local int unz64local_getLong64 OF((
-    const zlib_filefunc64_32_def* pzlib_filefunc_def,
-    voidpf filestream,
-    ZPOS64_T *pX));
-
-
-local int unz64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def,
-                            voidpf filestream,
-                            ZPOS64_T *pX)
-{
-    ZPOS64_T x ;
-    int i = 0;
-    int err;
-
-    err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x = (ZPOS64_T)i;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((ZPOS64_T)i)<<8;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((ZPOS64_T)i)<<16;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((ZPOS64_T)i)<<24;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((ZPOS64_T)i)<<32;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((ZPOS64_T)i)<<40;
 
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((ZPOS64_T)i)<<48;
-
-    if (err==UNZ_OK)
-        err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
-    x |= ((ZPOS64_T)i)<<56;
-
-    if (err==UNZ_OK)
-        *pX = x;
+local int unz64local_getLong64(const zlib_filefunc64_32_def* pzlib_filefunc_def,
+                               voidpf filestream,
+                               ZPOS64_T *pX) {
+    unsigned char c[8];
+    int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,c,8);
+    if (err==8)
+    {
+        *pX = c[0] | ((ZPOS64_T)c[1] << 8) | ((ZPOS64_T)c[2] << 16) | ((ZPOS64_T)c[3] << 24)
+            | ((ZPOS64_T)c[4] << 32) | ((ZPOS64_T)c[5] << 40) | ((ZPOS64_T)c[6] << 48) | ((ZPOS64_T)c[7] << 56);
+        return UNZ_OK;
+    }
     else
+    {
         *pX = 0;
-    return err;
+        if (ZERROR64(*pzlib_filefunc_def,filestream))
+            return UNZ_ERRNO;
+        else
+            return UNZ_EOF;
+    }
 }
 
 /* My own strcmpi / strcasecmp */
-local int strcmpcasenosensitive_internal (const char* fileName1, const char* fileName2)
-{
+local int strcmpcasenosensitive_internal(const char* fileName1, const char* fileName2) {
     for (;;)
     {
         char c1=*(fileName1++);
@@ -379,19 +292,17 @@ local int strcmpcasenosensitive_internal (const char* fileName1, const char* fil
 #endif
 
 /*
-   Compare two filename (fileName1,fileName2).
-   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
-   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+   Compare two filenames (fileName1,fileName2).
+   If iCaseSensitivity = 1, comparison is case sensitive (like strcmp)
+   If iCaseSensitivity = 2, comparison is not case sensitive (like strcmpi
                                                                 or strcasecmp)
-   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+   If iCaseSensitivity = 0, case sensitivity is default of your operating system
         (like 1 on Unix, 2 on Windows)
 
 */
 extern int ZEXPORT unzStringFileNameCompare (const char*  fileName1,
-                                                 const char*  fileName2,
-                                                 int iCaseSensitivity)
-
-{
+                                             const char*  fileName2,
+                                             int iCaseSensitivity) {
     if (iCaseSensitivity==0)
         iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE;
 
@@ -405,21 +316,23 @@ extern int ZEXPORT unzStringFileNameCompare (const char*  fileName1,
 #define BUFREADCOMMENT (0x400)
 #endif
 
+#ifndef CENTRALDIRINVALID
+#define CENTRALDIRINVALID ((ZPOS64_T)(-1))
+#endif
+
 /*
   Locate the Central directory of a zipfile (at the end, just before
     the global comment)
 */
-local ZPOS64_T unz64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream));
-local ZPOS64_T unz64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)
-{
+local ZPOS64_T unz64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) {
     unsigned char* buf;
     ZPOS64_T uSizeFile;
     ZPOS64_T uBackRead;
     ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */
-    ZPOS64_T uPosFound=0;
+    ZPOS64_T uPosFound=CENTRALDIRINVALID;
 
     if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
-        return 0;
+        return CENTRALDIRINVALID;
 
 
     uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream);
@@ -429,7 +342,7 @@ local ZPOS64_T unz64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_f
 
     buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
     if (buf==NULL)
-        return 0;
+        return CENTRALDIRINVALID;
 
     uBackRead = 4;
     while (uBackRead<uMaxBack)
@@ -459,10 +372,10 @@ local ZPOS64_T unz64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_f
                 break;
             }
 
-        if (uPosFound!=0)
+        if (uPosFound!=CENTRALDIRINVALID)
             break;
     }
-    TRYFREE(buf);
+    free(buf);
     return uPosFound;
 }
 
@@ -471,23 +384,18 @@ local ZPOS64_T unz64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_f
   Locate the Central directory 64 of a zipfile (at the end, just before
     the global comment)
 */
-local ZPOS64_T unz64local_SearchCentralDir64 OF((
-    const zlib_filefunc64_32_def* pzlib_filefunc_def,
-    voidpf filestream));
-
 local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def,
-                                      voidpf filestream)
-{
+                                             voidpf filestream) {
     unsigned char* buf;
     ZPOS64_T uSizeFile;
     ZPOS64_T uBackRead;
     ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */
-    ZPOS64_T uPosFound=0;
+    ZPOS64_T uPosFound=CENTRALDIRINVALID;
     uLong uL;
                 ZPOS64_T relativeOffset;
 
     if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
-        return 0;
+        return CENTRALDIRINVALID;
 
 
     uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream);
@@ -497,7 +405,7 @@ local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib
 
     buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
     if (buf==NULL)
-        return 0;
+        return CENTRALDIRINVALID;
 
     uBackRead = 4;
     while (uBackRead<uMaxBack)
@@ -527,47 +435,47 @@ local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib
                 break;
             }
 
-        if (uPosFound!=0)
+        if (uPosFound!=CENTRALDIRINVALID)
             break;
     }
-    TRYFREE(buf);
-    if (uPosFound == 0)
-        return 0;
+    free(buf);
+    if (uPosFound == CENTRALDIRINVALID)
+        return CENTRALDIRINVALID;
 
     /* Zip64 end of central directory locator */
     if (ZSEEK64(*pzlib_filefunc_def,filestream, uPosFound,ZLIB_FILEFUNC_SEEK_SET)!=0)
-        return 0;
+        return CENTRALDIRINVALID;
 
     /* the signature, already checked */
     if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
-        return 0;
+        return CENTRALDIRINVALID;
 
     /* number of the disk with the start of the zip64 end of  central directory */
     if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
-        return 0;
+        return CENTRALDIRINVALID;
     if (uL != 0)
-        return 0;
+        return CENTRALDIRINVALID;
 
     /* relative offset of the zip64 end of central directory record */
     if (unz64local_getLong64(pzlib_filefunc_def,filestream,&relativeOffset)!=UNZ_OK)
-        return 0;
+        return CENTRALDIRINVALID;
 
     /* total number of disks */
     if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
-        return 0;
+        return CENTRALDIRINVALID;
     if (uL != 1)
-        return 0;
+        return CENTRALDIRINVALID;
 
     /* Goto end of central directory record */
     if (ZSEEK64(*pzlib_filefunc_def,filestream, relativeOffset,ZLIB_FILEFUNC_SEEK_SET)!=0)
-        return 0;
+        return CENTRALDIRINVALID;
 
      /* the signature */
     if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
-        return 0;
+        return CENTRALDIRINVALID;
 
     if (uL != 0x06064b50)
-        return 0;
+        return CENTRALDIRINVALID;
 
     return relativeOffset;
 }
@@ -581,19 +489,18 @@ local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib
      Else, the return value is a unzFile Handle, usable with other function
        of this unzip package.
 */
-local unzFile unzOpenInternal (const void *path,
-                               zlib_filefunc64_32_def* pzlib_filefunc64_32_def,
-                               int is64bitOpenFunction)
-{
+local unzFile unzOpenInternal(const void *path,
+                              zlib_filefunc64_32_def* pzlib_filefunc64_32_def,
+                              int is64bitOpenFunction) {
     unz64_s us;
     unz64_s *s;
     ZPOS64_T central_pos;
     uLong   uL;
 
     uLong number_disk;          /* number of the current dist, used for
-                                   spaning ZIP, unsupported, always 0*/
+                                   spanning ZIP, unsupported, always 0*/
     uLong number_disk_with_CD;  /* number the the disk with central dir, used
-                                   for spaning ZIP, unsupported, always 0*/
+                                   for spanning ZIP, unsupported, always 0*/
     ZPOS64_T number_entry_CD;      /* total number of entries in
                                    the central dir
                                    (same than number_entry on nospan) */
@@ -621,7 +528,7 @@ local unzFile unzOpenInternal (const void *path,
         return NULL;
 
     central_pos = unz64local_SearchCentralDir64(&us.z_filefunc,us.filestream);
-    if (central_pos)
+    if (central_pos!=CENTRALDIRINVALID)
     {
         uLong uS;
         ZPOS64_T uL64;
@@ -683,7 +590,7 @@ local unzFile unzOpenInternal (const void *path,
     else
     {
         central_pos = unz64local_SearchCentralDir(&us.z_filefunc,us.filestream);
-        if (central_pos==0)
+        if (central_pos==CENTRALDIRINVALID)
             err=UNZ_ERRNO;
 
         us.isZip64 = 0;
@@ -762,9 +669,8 @@ local unzFile unzOpenInternal (const void *path,
 }
 
 
-extern unzFile ZEXPORT unzOpen2 (const char *path,
-                                        zlib_filefunc_def* pzlib_filefunc32_def)
-{
+extern unzFile ZEXPORT unzOpen2(const char *path,
+                                zlib_filefunc_def* pzlib_filefunc32_def) {
     if (pzlib_filefunc32_def != NULL)
     {
         zlib_filefunc64_32_def zlib_filefunc64_32_def_fill;
@@ -775,9 +681,8 @@ extern unzFile ZEXPORT unzOpen2 (const char *path,
         return unzOpenInternal(path, NULL, 0);
 }
 
-extern unzFile ZEXPORT unzOpen2_64 (const void *path,
-                                     zlib_filefunc64_def* pzlib_filefunc_def)
-{
+extern unzFile ZEXPORT unzOpen2_64(const void *path,
+                                   zlib_filefunc64_def* pzlib_filefunc_def) {
     if (pzlib_filefunc_def != NULL)
     {
         zlib_filefunc64_32_def zlib_filefunc64_32_def_fill;
@@ -790,13 +695,11 @@ extern unzFile ZEXPORT unzOpen2_64 (const void *path,
         return unzOpenInternal(path, NULL, 1);
 }
 
-extern unzFile ZEXPORT unzOpen (const char *path)
-{
+extern unzFile ZEXPORT unzOpen(const char *path) {
     return unzOpenInternal(path, NULL, 0);
 }
 
-extern unzFile ZEXPORT unzOpen64 (const void *path)
-{
+extern unzFile ZEXPORT unzOpen64(const void *path) {
     return unzOpenInternal(path, NULL, 1);
 }
 
@@ -805,8 +708,7 @@ extern unzFile ZEXPORT unzOpen64 (const void *path)
   If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
     these files MUST be closed with unzCloseCurrentFile before call unzClose.
   return UNZ_OK if there is no problem. */
-extern int ZEXPORT unzClose (unzFile file)
-{
+extern int ZEXPORT unzClose(unzFile file) {
     unz64_s* s;
     if (file==NULL)
         return UNZ_PARAMERROR;
@@ -816,7 +718,7 @@ extern int ZEXPORT unzClose (unzFile file)
         unzCloseCurrentFile(file);
 
     ZCLOSE64(s->z_filefunc, s->filestream);
-    TRYFREE(s);
+    free(s);
     return UNZ_OK;
 }
 
@@ -825,8 +727,7 @@ extern int ZEXPORT unzClose (unzFile file)
   Write info about the ZipFile in the *pglobal_info structure.
   No preparation of the structure is needed
   return UNZ_OK if there is no problem. */
-extern int ZEXPORT unzGetGlobalInfo64 (unzFile file, unz_global_info64* pglobal_info)
-{
+extern int ZEXPORT unzGetGlobalInfo64(unzFile file, unz_global_info64* pglobal_info) {
     unz64_s* s;
     if (file==NULL)
         return UNZ_PARAMERROR;
@@ -835,8 +736,7 @@ extern int ZEXPORT unzGetGlobalInfo64 (unzFile file, unz_global_info64* pglobal_
     return UNZ_OK;
 }
 
-extern int ZEXPORT unzGetGlobalInfo (unzFile file, unz_global_info* pglobal_info32)
-{
+extern int ZEXPORT unzGetGlobalInfo(unzFile file, unz_global_info* pglobal_info32) {
     unz64_s* s;
     if (file==NULL)
         return UNZ_PARAMERROR;
@@ -847,10 +747,9 @@ extern int ZEXPORT unzGetGlobalInfo (unzFile file, unz_global_info* pglobal_info
     return UNZ_OK;
 }
 /*
-   Translate date/time from Dos format to tm_unz (readable more easilty)
+   Translate date/time from Dos format to tm_unz (readable more easily)
 */
-local void unz64local_DosDateToTmuDate (ZPOS64_T ulDosDate, tm_unz* ptm)
-{
+local void unz64local_DosDateToTmuDate(ZPOS64_T ulDosDate, tm_unz* ptm) {
     ZPOS64_T uDate;
     uDate = (ZPOS64_T)(ulDosDate>>16);
     ptm->tm_mday = (int)(uDate&0x1f) ;
@@ -865,28 +764,16 @@ local void unz64local_DosDateToTmuDate (ZPOS64_T ulDosDate, tm_unz* ptm)
 /*
   Get Info about the current file in the zipfile, with internal only info
 */
-local int unz64local_GetCurrentFileInfoInternal OF((unzFile file,
-                                                  unz_file_info64 *pfile_info,
-                                                  unz_file_info64_internal
-                                                  *pfile_info_internal,
-                                                  char *szFileName,
-                                                  uLong fileNameBufferSize,
-                                                  void *extraField,
-                                                  uLong extraFieldBufferSize,
-                                                  char *szComment,
-                                                  uLong commentBufferSize));
-
-local int unz64local_GetCurrentFileInfoInternal (unzFile file,
-                                                  unz_file_info64 *pfile_info,
-                                                  unz_file_info64_internal
-                                                  *pfile_info_internal,
-                                                  char *szFileName,
-                                                  uLong fileNameBufferSize,
-                                                  void *extraField,
-                                                  uLong extraFieldBufferSize,
-                                                  char *szComment,
-                                                  uLong commentBufferSize)
-{
+local int unz64local_GetCurrentFileInfoInternal(unzFile file,
+                                                unz_file_info64 *pfile_info,
+                                                unz_file_info64_internal
+                                                *pfile_info_internal,
+                                                char *szFileName,
+                                                uLong fileNameBufferSize,
+                                                void *extraField,
+                                                uLong extraFieldBufferSize,
+                                                char *szComment,
+                                                uLong commentBufferSize) {
     unz64_s* s;
     unz_file_info64 file_info;
     unz_file_info64_internal file_info_internal;
@@ -1038,33 +925,31 @@ local int unz64local_GetCurrentFileInfoInternal (unzFile file,
             /* ZIP64 extra fields */
             if (headerId == 0x0001)
             {
-                                                        uLong uL;
-
-                                                                if(file_info.uncompressed_size == MAXU32)
-                                                                {
-                                                                        if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK)
-                                                                                        err=UNZ_ERRNO;
-                                                                }
-
-                                                                if(file_info.compressed_size == MAXU32)
-                                                                {
-                                                                        if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK)
-                                                                                  err=UNZ_ERRNO;
-                                                                }
-
-                                                                if(file_info_internal.offset_curfile == MAXU32)
-                                                                {
-                                                                        /* Relative Header offset */
-                                                                        if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK)
-                                                                                err=UNZ_ERRNO;
-                                                                }
-
-                                                                if(file_info.disk_num_start == MAXU32)
-                                                                {
-                                                                        /* Disk Start Number */
-                                                                        if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
-                                                                                err=UNZ_ERRNO;
-                                                                }
+                if(file_info.uncompressed_size == MAXU32)
+                {
+                    if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK)
+                        err=UNZ_ERRNO;
+                }
+
+                if(file_info.compressed_size == MAXU32)
+                {
+                    if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK)
+                        err=UNZ_ERRNO;
+                }
+
+                if(file_info_internal.offset_curfile == MAXU32)
+                {
+                    /* Relative Header offset */
+                    if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK)
+                        err=UNZ_ERRNO;
+                }
+
+                if(file_info.disk_num_start == 0xffff)
+                {
+                    /* Disk Start Number */
+                    if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK)
+                        err=UNZ_ERRNO;
+                }
 
             }
             else
@@ -1121,24 +1006,22 @@ local int unz64local_GetCurrentFileInfoInternal (unzFile file,
   No preparation of the structure is needed
   return UNZ_OK if there is no problem.
 */
-extern int ZEXPORT unzGetCurrentFileInfo64 (unzFile file,
-                                          unz_file_info64 * pfile_info,
-                                          char * szFileName, uLong fileNameBufferSize,
-                                          void *extraField, uLong extraFieldBufferSize,
-                                          char* szComment,  uLong commentBufferSize)
-{
+extern int ZEXPORT unzGetCurrentFileInfo64(unzFile file,
+                                           unz_file_info64 * pfile_info,
+                                           char * szFileName, uLong fileNameBufferSize,
+                                           void *extraField, uLong extraFieldBufferSize,
+                                           char* szComment,  uLong commentBufferSize) {
     return unz64local_GetCurrentFileInfoInternal(file,pfile_info,NULL,
-                                                szFileName,fileNameBufferSize,
-                                                extraField,extraFieldBufferSize,
-                                                szComment,commentBufferSize);
+                                                 szFileName,fileNameBufferSize,
+                                                 extraField,extraFieldBufferSize,
+                                                 szComment,commentBufferSize);
 }
 
-extern int ZEXPORT unzGetCurrentFileInfo (unzFile file,
-                                          unz_file_info * pfile_info,
-                                          char * szFileName, uLong fileNameBufferSize,
-                                          void *extraField, uLong extraFieldBufferSize,
-                                          char* szComment,  uLong commentBufferSize)
-{
+extern int ZEXPORT unzGetCurrentFileInfo(unzFile file,
+                                         unz_file_info * pfile_info,
+                                         char * szFileName, uLong fileNameBufferSize,
+                                         void *extraField, uLong extraFieldBufferSize,
+                                         char* szComment,  uLong commentBufferSize) {
     int err;
     unz_file_info64 file_info64;
     err = unz64local_GetCurrentFileInfoInternal(file,&file_info64,NULL,
@@ -1162,7 +1045,7 @@ extern int ZEXPORT unzGetCurrentFileInfo (unzFile file,
         pfile_info->internal_fa = file_info64.internal_fa;
         pfile_info->external_fa = file_info64.external_fa;
 
-        pfile_info->tmu_date = file_info64.tmu_date,
+        pfile_info->tmu_date = file_info64.tmu_date;
 
 
         pfile_info->compressed_size = (uLong)file_info64.compressed_size;
@@ -1175,8 +1058,7 @@ extern int ZEXPORT unzGetCurrentFileInfo (unzFile file,
   Set the current file of the zipfile to the first file.
   return UNZ_OK if there is no problem
 */
-extern int ZEXPORT unzGoToFirstFile (unzFile file)
-{
+extern int ZEXPORT unzGoToFirstFile(unzFile file) {
     int err=UNZ_OK;
     unz64_s* s;
     if (file==NULL)
@@ -1196,8 +1078,7 @@ extern int ZEXPORT unzGoToFirstFile (unzFile file)
   return UNZ_OK if there is no problem
   return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
 */
-extern int ZEXPORT unzGoToNextFile (unzFile  file)
-{
+extern int ZEXPORT unzGoToNextFile(unzFile file) {
     unz64_s* s;
     int err;
 
@@ -1229,8 +1110,7 @@ extern int ZEXPORT unzGoToNextFile (unzFile  file)
   UNZ_OK if the file is found. It becomes the current file.
   UNZ_END_OF_LIST_OF_FILE if the file is not found
 */
-extern int ZEXPORT unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity)
-{
+extern int ZEXPORT unzLocateFile(unzFile file, const char *szFileName, int iCaseSensitivity) {
     unz64_s* s;
     int err;
 
@@ -1305,8 +1185,7 @@ typedef struct unz_file_pos_s
 } unz_file_pos;
 */
 
-extern int ZEXPORT unzGetFilePos64(unzFile file, unz64_file_pos*  file_pos)
-{
+extern int ZEXPORT unzGetFilePos64(unzFile file, unz64_file_pos* file_pos) {
     unz64_s* s;
 
     if (file==NULL || file_pos==NULL)
@@ -1321,10 +1200,7 @@ extern int ZEXPORT unzGetFilePos64(unzFile file, unz64_file_pos*  file_pos)
     return UNZ_OK;
 }
 
-extern int ZEXPORT unzGetFilePos(
-    unzFile file,
-    unz_file_pos* file_pos)
-{
+extern int ZEXPORT unzGetFilePos(unzFile file, unz_file_pos* file_pos) {
     unz64_file_pos file_pos64;
     int err = unzGetFilePos64(file,&file_pos64);
     if (err==UNZ_OK)
@@ -1335,8 +1211,7 @@ extern int ZEXPORT unzGetFilePos(
     return err;
 }
 
-extern int ZEXPORT unzGoToFilePos64(unzFile file, const unz64_file_pos* file_pos)
-{
+extern int ZEXPORT unzGoToFilePos64(unzFile file, const unz64_file_pos* file_pos) {
     unz64_s* s;
     int err;
 
@@ -1357,10 +1232,7 @@ extern int ZEXPORT unzGoToFilePos64(unzFile file, const unz64_file_pos* file_pos
     return err;
 }
 
-extern int ZEXPORT unzGoToFilePos(
-    unzFile file,
-    unz_file_pos* file_pos)
-{
+extern int ZEXPORT unzGoToFilePos(unzFile file, unz_file_pos* file_pos) {
     unz64_file_pos file_pos64;
     if (file_pos == NULL)
         return UNZ_PARAMERROR;
@@ -1382,10 +1254,9 @@ extern int ZEXPORT unzGoToFilePos(
   store in *piSizeVar the size of extra info in local header
         (filename and size of extra field data)
 */
-local int unz64local_CheckCurrentFileCoherencyHeader (unz64_s* s, uInt* piSizeVar,
-                                                    ZPOS64_T * poffset_local_extrafield,
-                                                    uInt  * psize_local_extrafield)
-{
+local int unz64local_CheckCurrentFileCoherencyHeader(unz64_s* s, uInt* piSizeVar,
+                                                     ZPOS64_T * poffset_local_extrafield,
+                                                     uInt  * psize_local_extrafield) {
     uLong uMagic,uData,uFlags;
     uLong size_filename;
     uLong size_extra_field;
@@ -1469,9 +1340,8 @@ local int unz64local_CheckCurrentFileCoherencyHeader (unz64_s* s, uInt* piSizeVa
   Open for reading data the current file in the zipfile.
   If there is no error and the file is opened, the return value is UNZ_OK.
 */
-extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method,
-                                            int* level, int raw, const char* password)
-{
+extern int ZEXPORT unzOpenCurrentFile3(unzFile file, int* method,
+                                       int* level, int raw, const char* password) {
     int err=UNZ_OK;
     uInt iSizeVar;
     unz64_s* s;
@@ -1509,7 +1379,7 @@ extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method,
 
     if (pfile_in_zip_read_info->read_buffer==NULL)
     {
-        TRYFREE(pfile_in_zip_read_info);
+        free(pfile_in_zip_read_info);
         return UNZ_INTERNALERROR;
     }
 
@@ -1566,8 +1436,8 @@ extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method,
         pfile_in_zip_read_info->stream_initialised=Z_BZIP2ED;
       else
       {
-        TRYFREE(pfile_in_zip_read_info->read_buffer);
-        TRYFREE(pfile_in_zip_read_info);
+        free(pfile_in_zip_read_info->read_buffer);
+        free(pfile_in_zip_read_info);
         return err;
       }
 #else
@@ -1587,8 +1457,8 @@ extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method,
         pfile_in_zip_read_info->stream_initialised=Z_DEFLATED;
       else
       {
-        TRYFREE(pfile_in_zip_read_info->read_buffer);
-        TRYFREE(pfile_in_zip_read_info);
+        free(pfile_in_zip_read_info->read_buffer);
+        free(pfile_in_zip_read_info);
         return err;
       }
         /* windowBits is passed < 0 to tell that there is no zlib header.
@@ -1640,25 +1510,21 @@ extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method,
     return UNZ_OK;
 }
 
-extern int ZEXPORT unzOpenCurrentFile (unzFile file)
-{
+extern int ZEXPORT unzOpenCurrentFile(unzFile file) {
     return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL);
 }
 
-extern int ZEXPORT unzOpenCurrentFilePassword (unzFile file, const char*  password)
-{
+extern int ZEXPORT unzOpenCurrentFilePassword(unzFile file, const char* password) {
     return unzOpenCurrentFile3(file, NULL, NULL, 0, password);
 }
 
-extern int ZEXPORT unzOpenCurrentFile2 (unzFile file, int* method, int* level, int raw)
-{
+extern int ZEXPORT unzOpenCurrentFile2(unzFile file, int* method, int* level, int raw) {
     return unzOpenCurrentFile3(file, method, level, raw, NULL);
 }
 
 /** Addition for GDAL : START */
 
-extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64( unzFile file)
-{
+extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64(unzFile file) {
     unz64_s* s;
     file_in_zip64_read_info_s* pfile_in_zip_read_info;
     s=(unz64_s*)file;
@@ -1678,13 +1544,12 @@ extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64( unzFile file)
   buf contain buffer where data must be copied
   len the size of buf.
 
-  return the number of byte copied if somes bytes are copied
+  return the number of byte copied if some bytes are copied
   return 0 if the end of file was reached
   return <0 with error code if there is an error
     (UNZ_ERRNO for IO error, or zLib error for uncompress error)
 */
-extern int ZEXPORT unzReadCurrentFile  (unzFile file, voidp buf, unsigned len)
-{
+extern int ZEXPORT unzReadCurrentFile(unzFile file, voidp buf, unsigned len) {
     int err=UNZ_OK;
     uInt iRead = 0;
     unz64_s* s;
@@ -1891,8 +1756,7 @@ extern int ZEXPORT unzReadCurrentFile  (unzFile file, voidp buf, unsigned len)
 /*
   Give the current position in uncompressed data
 */
-extern z_off_t ZEXPORT unztell (unzFile file)
-{
+extern z_off_t ZEXPORT unztell(unzFile file) {
     unz64_s* s;
     file_in_zip64_read_info_s* pfile_in_zip_read_info;
     if (file==NULL)
@@ -1906,8 +1770,7 @@ extern z_off_t ZEXPORT unztell (unzFile file)
     return (z_off_t)pfile_in_zip_read_info->stream.total_out;
 }
 
-extern ZPOS64_T ZEXPORT unztell64 (unzFile file)
-{
+extern ZPOS64_T ZEXPORT unztell64(unzFile file) {
 
     unz64_s* s;
     file_in_zip64_read_info_s* pfile_in_zip_read_info;
@@ -1926,8 +1789,7 @@ extern ZPOS64_T ZEXPORT unztell64 (unzFile file)
 /*
   return 1 if the end of file was reached, 0 elsewhere
 */
-extern int ZEXPORT unzeof (unzFile file)
-{
+extern int ZEXPORT unzeof(unzFile file) {
     unz64_s* s;
     file_in_zip64_read_info_s* pfile_in_zip_read_info;
     if (file==NULL)
@@ -1958,8 +1820,7 @@ more info in the local-header version than in the central-header)
   the return value is the number of bytes copied in buf, or (if <0)
     the error code
 */
-extern int ZEXPORT unzGetLocalExtrafield (unzFile file, voidp buf, unsigned len)
-{
+extern int ZEXPORT unzGetLocalExtrafield(unzFile file, voidp buf, unsigned len) {
     unz64_s* s;
     file_in_zip64_read_info_s* pfile_in_zip_read_info;
     uInt read_now;
@@ -2006,8 +1867,7 @@ extern int ZEXPORT unzGetLocalExtrafield (unzFile file, voidp buf, unsigned len)
   Close the file in zip opened with unzOpenCurrentFile
   Return UNZ_CRCERROR if all the file was read but the CRC is not good
 */
-extern int ZEXPORT unzCloseCurrentFile (unzFile file)
-{
+extern int ZEXPORT unzCloseCurrentFile(unzFile file) {
     int err=UNZ_OK;
 
     unz64_s* s;
@@ -2029,7 +1889,7 @@ extern int ZEXPORT unzCloseCurrentFile (unzFile file)
     }
 
 
-    TRYFREE(pfile_in_zip_read_info->read_buffer);
+    free(pfile_in_zip_read_info->read_buffer);
     pfile_in_zip_read_info->read_buffer = NULL;
     if (pfile_in_zip_read_info->stream_initialised == Z_DEFLATED)
         inflateEnd(&pfile_in_zip_read_info->stream);
@@ -2040,7 +1900,7 @@ extern int ZEXPORT unzCloseCurrentFile (unzFile file)
 
 
     pfile_in_zip_read_info->stream_initialised = 0;
-    TRYFREE(pfile_in_zip_read_info);
+    free(pfile_in_zip_read_info);
 
     s->pfile_in_zip_read=NULL;
 
@@ -2053,8 +1913,7 @@ extern int ZEXPORT unzCloseCurrentFile (unzFile file)
   uSizeBuf is the size of the szComment buffer.
   return the number of byte copied or an error code <0
 */
-extern int ZEXPORT unzGetGlobalComment (unzFile file, char * szComment, uLong uSizeBuf)
-{
+extern int ZEXPORT unzGetGlobalComment(unzFile file, char * szComment, uLong uSizeBuf) {
     unz64_s* s;
     uLong uReadThis ;
     if (file==NULL)
@@ -2081,8 +1940,7 @@ extern int ZEXPORT unzGetGlobalComment (unzFile file, char * szComment, uLong uS
 }
 
 /* Additions by RX '2004 */
-extern ZPOS64_T ZEXPORT unzGetOffset64(unzFile file)
-{
+extern ZPOS64_T ZEXPORT unzGetOffset64(unzFile file) {
     unz64_s* s;
 
     if (file==NULL)
@@ -2096,8 +1954,7 @@ extern ZPOS64_T ZEXPORT unzGetOffset64(unzFile file)
     return s->pos_in_central_dir;
 }
 
-extern uLong ZEXPORT unzGetOffset (unzFile file)
-{
+extern uLong ZEXPORT unzGetOffset(unzFile file) {
     ZPOS64_T offset64;
 
     if (file==NULL)
@@ -2106,8 +1963,7 @@ extern uLong ZEXPORT unzGetOffset (unzFile file)
     return (uLong)offset64;
 }
 
-extern int ZEXPORT unzSetOffset64(unzFile file, ZPOS64_T pos)
-{
+extern int ZEXPORT unzSetOffset64(unzFile file, ZPOS64_T pos) {
     unz64_s* s;
     int err;
 
@@ -2124,7 +1980,6 @@ extern int ZEXPORT unzSetOffset64(unzFile file, ZPOS64_T pos)
     return err;
 }
 
-extern int ZEXPORT unzSetOffset (unzFile file, uLong pos)
-{
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos) {
     return unzSetOffset64(file,pos);
 }
diff --git a/compat/zlib/contrib/minizip/unzip.h b/compat/zlib/contrib/minizip/unzip.h
index 6f95e94..1410584 100644
--- a/compat/zlib/contrib/minizip/unzip.h
+++ b/compat/zlib/contrib/minizip/unzip.h
@@ -150,21 +150,21 @@ typedef struct unz_file_info_s
     tm_unz tmu_date;
 } unz_file_info;
 
-extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
-                                                 const char* fileName2,
-                                                 int iCaseSensitivity));
+extern int ZEXPORT unzStringFileNameCompare(const char* fileName1,
+                                            const char* fileName2,
+                                            int iCaseSensitivity);
 /*
-   Compare two filename (fileName1,fileName2).
-   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
-   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+   Compare two filenames (fileName1,fileName2).
+   If iCaseSensitivity = 1, comparison is case sensitive (like strcmp)
+   If iCaseSensitivity = 2, comparison is not case sensitive (like strcmpi
                                 or strcasecmp)
-   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+   If iCaseSensitivity = 0, case sensitivity is default of your operating system
     (like 1 on Unix, 2 on Windows)
 */
 
 
-extern unzFile ZEXPORT unzOpen OF((const char *path));
-extern unzFile ZEXPORT unzOpen64 OF((const void *path));
+extern unzFile ZEXPORT unzOpen(const char *path);
+extern unzFile ZEXPORT unzOpen64(const void *path);
 /*
   Open a Zip file. path contain the full pathname (by example,
      on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer
@@ -181,41 +181,41 @@ extern unzFile ZEXPORT unzOpen64 OF((const void *path));
 */
 
 
-extern unzFile ZEXPORT unzOpen2 OF((const char *path,
-                                    zlib_filefunc_def* pzlib_filefunc_def));
+extern unzFile ZEXPORT unzOpen2(const char *path,
+                                zlib_filefunc_def* pzlib_filefunc_def);
 /*
    Open a Zip file, like unzOpen, but provide a set of file low level API
       for read/write the zip file (see ioapi.h)
 */
 
-extern unzFile ZEXPORT unzOpen2_64 OF((const void *path,
-                                    zlib_filefunc64_def* pzlib_filefunc_def));
+extern unzFile ZEXPORT unzOpen2_64(const void *path,
+                                   zlib_filefunc64_def* pzlib_filefunc_def);
 /*
    Open a Zip file, like unz64Open, but provide a set of file low level API
       for read/write the zip file (see ioapi.h)
 */
 
-extern int ZEXPORT unzClose OF((unzFile file));
+extern int ZEXPORT unzClose(unzFile file);
 /*
   Close a ZipFile opened with unzOpen.
   If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
     these files MUST be closed with unzCloseCurrentFile before call unzClose.
   return UNZ_OK if there is no problem. */
 
-extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
-                                        unz_global_info *pglobal_info));
+extern int ZEXPORT unzGetGlobalInfo(unzFile file,
+                                    unz_global_info *pglobal_info);
 
-extern int ZEXPORT unzGetGlobalInfo64 OF((unzFile file,
-                                        unz_global_info64 *pglobal_info));
+extern int ZEXPORT unzGetGlobalInfo64(unzFile file,
+                                      unz_global_info64 *pglobal_info);
 /*
   Write info about the ZipFile in the *pglobal_info structure.
   No preparation of the structure is needed
   return UNZ_OK if there is no problem. */
 
 
-extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
-                                           char *szComment,
-                                           uLong uSizeBuf));
+extern int ZEXPORT unzGetGlobalComment(unzFile file,
+                                       char *szComment,
+                                       uLong uSizeBuf);
 /*
   Get the global comment string of the ZipFile, in the szComment buffer.
   uSizeBuf is the size of the szComment buffer.
@@ -226,22 +226,22 @@ extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
 /***************************************************************************/
 /* Unzip package allow you browse the directory of the zipfile */
 
-extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+extern int ZEXPORT unzGoToFirstFile(unzFile file);
 /*
   Set the current file of the zipfile to the first file.
   return UNZ_OK if there is no problem
 */
 
-extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+extern int ZEXPORT unzGoToNextFile(unzFile file);
 /*
   Set the current file of the zipfile to the next file.
   return UNZ_OK if there is no problem
   return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
 */
 
-extern int ZEXPORT unzLocateFile OF((unzFile file,
-                     const char *szFileName,
-                     int iCaseSensitivity));
+extern int ZEXPORT unzLocateFile(unzFile file,
+                                 const char *szFileName,
+                                 int iCaseSensitivity);
 /*
   Try locate the file szFileName in the zipfile.
   For the iCaseSensitivity signification, see unzStringFileNameCompare
@@ -285,26 +285,26 @@ extern int ZEXPORT unzGoToFilePos64(
 
 /* ****************************************** */
 
-extern int ZEXPORT unzGetCurrentFileInfo64 OF((unzFile file,
-                         unz_file_info64 *pfile_info,
-                         char *szFileName,
-                         uLong fileNameBufferSize,
-                         void *extraField,
-                         uLong extraFieldBufferSize,
-                         char *szComment,
-                         uLong commentBufferSize));
-
-extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
-                         unz_file_info *pfile_info,
-                         char *szFileName,
-                         uLong fileNameBufferSize,
-                         void *extraField,
-                         uLong extraFieldBufferSize,
-                         char *szComment,
-                         uLong commentBufferSize));
+extern int ZEXPORT unzGetCurrentFileInfo64(unzFile file,
+                                           unz_file_info64 *pfile_info,
+                                           char *szFileName,
+                                           uLong fileNameBufferSize,
+                                           void *extraField,
+                                           uLong extraFieldBufferSize,
+                                           char *szComment,
+                                           uLong commentBufferSize);
+
+extern int ZEXPORT unzGetCurrentFileInfo(unzFile file,
+                                         unz_file_info *pfile_info,
+                                         char *szFileName,
+                                         uLong fileNameBufferSize,
+                                         void *extraField,
+                                         uLong extraFieldBufferSize,
+                                         char *szComment,
+                                         uLong commentBufferSize);
 /*
   Get Info about the current file
-  if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+  if pfile_info!=NULL, the *pfile_info structure will contain some info about
         the current file
   if szFileName!=NULL, the filemane string will be copied in szFileName
             (fileNameBufferSize is the size of the buffer)
@@ -318,7 +318,7 @@ extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
 
 /** Addition for GDAL : START */
 
-extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64 OF((unzFile file));
+extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64(unzFile file);
 
 /** Addition for GDAL : END */
 
@@ -328,24 +328,24 @@ extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64 OF((unzFile file));
    from it, and close it (you can close it before reading all the file)
    */
 
-extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+extern int ZEXPORT unzOpenCurrentFile(unzFile file);
 /*
   Open for reading data the current file in the zipfile.
   If there is no error, the return value is UNZ_OK.
 */
 
-extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file,
-                                                  const char* password));
+extern int ZEXPORT unzOpenCurrentFilePassword(unzFile file,
+                                              const char* password);
 /*
   Open for reading data the current file in the zipfile.
   password is a crypting password
   If there is no error, the return value is UNZ_OK.
 */
 
-extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
-                                           int* method,
-                                           int* level,
-                                           int raw));
+extern int ZEXPORT unzOpenCurrentFile2(unzFile file,
+                                       int* method,
+                                       int* level,
+                                       int raw);
 /*
   Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
     if raw==1
@@ -355,11 +355,11 @@ extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
          but you CANNOT set method parameter as NULL
 */
 
-extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
-                                           int* method,
-                                           int* level,
-                                           int raw,
-                                           const char* password));
+extern int ZEXPORT unzOpenCurrentFile3(unzFile file,
+                                       int* method,
+                                       int* level,
+                                       int raw,
+                                       const char* password);
 /*
   Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
     if raw==1
@@ -370,41 +370,41 @@ extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
 */
 
 
-extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+extern int ZEXPORT unzCloseCurrentFile(unzFile file);
 /*
   Close the file in zip opened with unzOpenCurrentFile
   Return UNZ_CRCERROR if all the file was read but the CRC is not good
 */
 
-extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
-                      voidp buf,
-                      unsigned len));
+extern int ZEXPORT unzReadCurrentFile(unzFile file,
+                                      voidp buf,
+                                      unsigned len);
 /*
   Read bytes from the current file (opened by unzOpenCurrentFile)
   buf contain buffer where data must be copied
   len the size of buf.
 
-  return the number of byte copied if somes bytes are copied
+  return the number of byte copied if some bytes are copied
   return 0 if the end of file was reached
   return <0 with error code if there is an error
     (UNZ_ERRNO for IO error, or zLib error for uncompress error)
 */
 
-extern z_off_t ZEXPORT unztell OF((unzFile file));
+extern z_off_t ZEXPORT unztell(unzFile file);
 
-extern ZPOS64_T ZEXPORT unztell64 OF((unzFile file));
+extern ZPOS64_T ZEXPORT unztell64(unzFile file);
 /*
   Give the current position in uncompressed data
 */
 
-extern int ZEXPORT unzeof OF((unzFile file));
+extern int ZEXPORT unzeof(unzFile file);
 /*
   return 1 if the end of file was reached, 0 elsewhere
 */
 
-extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
-                                             voidp buf,
-                                             unsigned len));
+extern int ZEXPORT unzGetLocalExtrafield(unzFile file,
+                                         voidp buf,
+                                         unsigned len);
 /*
   Read extra field from the current file (opened by unzOpenCurrentFile)
   This is the local-header version of the extra field (sometimes, there is
diff --git a/compat/zlib/contrib/minizip/zip.c b/compat/zlib/contrib/minizip/zip.c
index 66d693f..3d3d4ca 100644
--- a/compat/zlib/contrib/minizip/zip.c
+++ b/compat/zlib/contrib/minizip/zip.c
@@ -14,7 +14,7 @@
    Oct-2009 - Mathias Svensson - Added Zip64 Support when creating new file archives
    Oct-2009 - Mathias Svensson - Did some code cleanup and refactoring to get better overview of some functions.
    Oct-2009 - Mathias Svensson - Added zipRemoveExtraInfoBlock to strip extra field data from its ZIP64 data
-                                 It is used when recreting zip archive with RAW when deleting items from a zip.
+                                 It is used when recreating zip archive with RAW when deleting items from a zip.
                                  ZIP64 data is automatically added to items that needs it, and existing ZIP64 data need to be removed.
    Oct-2009 - Mathias Svensson - Added support for BZIP2 as compression mode (bzip2 lib is required)
    Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer
@@ -25,14 +25,13 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include <stdint.h>
 #include <time.h>
 #include "zlib.h"
 #include "zip.h"
 
 #ifdef STDC
 #  include <stddef.h>
-#  include <string.h>
-#  include <stdlib.h>
 #endif
 #ifdef NO_ERRNO_H
     extern int errno;
@@ -47,7 +46,7 @@
 /* compile with -Dlocal if your debugger can't find static symbols */
 
 #ifndef VERSIONMADEBY
-# define VERSIONMADEBY   (0x0) /* platform depedent */
+# define VERSIONMADEBY   (0x0) /* platform dependent */
 #endif
 
 #ifndef Z_BUFSIZE
@@ -61,9 +60,6 @@
 #ifndef ALLOC
 # define ALLOC(size) (malloc(size))
 #endif
-#ifndef TRYFREE
-# define TRYFREE(p) {if (p) free(p);}
-#endif
 
 /*
 #define SIZECENTRALDIRITEM (0x2e)
@@ -138,20 +134,20 @@ typedef struct
     uInt pos_in_buffered_data;  /* last written byte in buffered_data */
 
     ZPOS64_T pos_local_header;     /* offset of the local header of the file
-                                     currenty writing */
+                                     currently writing */
     char* central_header;       /* central header data for the current file */
     uLong size_centralExtra;
     uLong size_centralheader;   /* size of the central header for cur file */
     uLong size_centralExtraFree; /* Extra bytes allocated to the centralheader but that are not used */
     uLong flag;                 /* flag of the file currently writing */
 
-    int  method;                /* compression method of file currenty wr.*/
+    int  method;                /* compression method of file currently wr.*/
     int  raw;                   /* 1 for directly writing raw data */
     Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/
     uLong dosDate;
     uLong crc32;
     int  encrypt;
-    int  zip64;               /* Add ZIP64 extened information in the extra field */
+    int  zip64;               /* Add ZIP64 extended information in the extra field */
     ZPOS64_T pos_zip64extrainfo;
     ZPOS64_T totalCompressedData;
     ZPOS64_T totalUncompressedData;
@@ -165,10 +161,10 @@ typedef struct
 typedef struct
 {
     zlib_filefunc64_32_def z_filefunc;
-    voidpf filestream;        /* io structore of the zipfile */
+    voidpf filestream;        /* io structure of the zipfile */
     linkedlist_data central_dir;/* datablock with central dir in construction*/
     int  in_opened_file_inzip;  /* 1 if a file in the zip is currently writ.*/
-    curfile64_info ci;            /* info on the file curretly writing */
+    curfile64_info ci;            /* info on the file currently writing */
 
     ZPOS64_T begin_pos;            /* position of the beginning of the zipfile */
     ZPOS64_T add_position_when_writing_offset;
@@ -186,8 +182,7 @@ typedef struct
 #include "crypt.h"
 #endif
 
-local linkedlist_datablock_internal* allocate_new_datablock()
-{
+local linkedlist_datablock_internal* allocate_new_datablock(void) {
     linkedlist_datablock_internal* ldi;
     ldi = (linkedlist_datablock_internal*)
                  ALLOC(sizeof(linkedlist_datablock_internal));
@@ -200,30 +195,26 @@ local linkedlist_datablock_internal* allocate_new_datablock()
     return ldi;
 }
 
-local void free_datablock(linkedlist_datablock_internal* ldi)
-{
+local void free_datablock(linkedlist_datablock_internal* ldi) {
     while (ldi!=NULL)
     {
         linkedlist_datablock_internal* ldinext = ldi->next_datablock;
-        TRYFREE(ldi);
+        free(ldi);
         ldi = ldinext;
     }
 }
 
-local void init_linkedlist(linkedlist_data* ll)
-{
+local void init_linkedlist(linkedlist_data* ll) {
     ll->first_block = ll->last_block = NULL;
 }
 
-local void free_linkedlist(linkedlist_data* ll)
-{
+local void free_linkedlist(linkedlist_data* ll) {
     free_datablock(ll->first_block);
     ll->first_block = ll->last_block = NULL;
 }
 
 
-local int add_data_in_datablock(linkedlist_data* ll, const void* buf, uLong len)
-{
+local int add_data_in_datablock(linkedlist_data* ll, const void* buf, uLong len) {
     linkedlist_datablock_internal* ldi;
     const unsigned char* from_copy;
 
@@ -238,7 +229,7 @@ local int add_data_in_datablock(linkedlist_data* ll, const void* buf, uLong len)
     }
 
     ldi = ll->last_block;
-    from_copy = (unsigned char*)buf;
+    from_copy = (const unsigned char*)buf;
 
     while (len>0)
     {
@@ -283,9 +274,7 @@ local int add_data_in_datablock(linkedlist_data* ll, const void* buf, uLong len)
    nbByte == 1, 2 ,4 or 8 (byte, short or long, ZPOS64_T)
 */
 
-local int zip64local_putValue OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte));
-local int zip64local_putValue (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte)
-{
+local int zip64local_putValue(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte) {
     unsigned char buf[8];
     int n;
     for (n = 0; n < nbByte; n++)
@@ -307,9 +296,7 @@ local int zip64local_putValue (const zlib_filefunc64_32_def* pzlib_filefunc_def,
         return ZIP_OK;
 }
 
-local void zip64local_putValue_inmemory OF((void* dest, ZPOS64_T x, int nbByte));
-local void zip64local_putValue_inmemory (void* dest, ZPOS64_T x, int nbByte)
-{
+local void zip64local_putValue_inmemory (void* dest, ZPOS64_T x, int nbByte) {
     unsigned char* buf=(unsigned char*)dest;
     int n;
     for (n = 0; n < nbByte; n++) {
@@ -329,8 +316,7 @@ local void zip64local_putValue_inmemory (void* dest, ZPOS64_T x, int nbByte)
 /****************************************************************************/
 
 
-local uLong zip64local_TmzDateToDosDate(const tm_zip* ptm)
-{
+local uLong zip64local_TmzDateToDosDate(const tm_zip* ptm) {
     uLong year = (uLong)ptm->tm_year;
     if (year>=1980)
         year-=1980;
@@ -344,10 +330,7 @@ local uLong zip64local_TmzDateToDosDate(const tm_zip* ptm)
 
 /****************************************************************************/
 
-local int zip64local_getByte OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi));
-
-local int zip64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def,voidpf filestream,int* pi)
-{
+local int zip64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int* pi) {
     unsigned char c;
     int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1);
     if (err==1)
@@ -368,10 +351,7 @@ local int zip64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def,vo
 /* ===========================================================================
    Reads a long in LSB order from the given gz_stream. Sets
 */
-local int zip64local_getShort OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX));
-
-local int zip64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX)
-{
+local int zip64local_getShort(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX) {
     uLong x ;
     int i = 0;
     int err;
@@ -390,10 +370,7 @@ local int zip64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def,
     return err;
 }
 
-local int zip64local_getLong OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX));
-
-local int zip64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX)
-{
+local int zip64local_getLong(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX) {
     uLong x ;
     int i = 0;
     int err;
@@ -420,11 +397,8 @@ local int zip64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def,
     return err;
 }
 
-local int zip64local_getLong64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX));
-
 
-local int zip64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX)
-{
+local int zip64local_getLong64(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX) {
   ZPOS64_T x;
   int i = 0;
   int err;
@@ -475,10 +449,7 @@ local int zip64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def
   Locate the Central directory of a zipfile (at the end, just before
     the global comment)
 */
-local ZPOS64_T zip64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream));
-
-local ZPOS64_T zip64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)
-{
+local ZPOS64_T zip64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) {
   unsigned char* buf;
   ZPOS64_T uSizeFile;
   ZPOS64_T uBackRead;
@@ -529,7 +500,7 @@ local ZPOS64_T zip64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_f
     if (uPosFound!=0)
       break;
   }
-  TRYFREE(buf);
+  free(buf);
   return uPosFound;
 }
 
@@ -537,10 +508,7 @@ local ZPOS64_T zip64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_f
 Locate the End of Zip64 Central directory locator and from there find the CD of a zipfile (at the end, just before
 the global comment)
 */
-local ZPOS64_T zip64local_SearchCentralDir64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream));
-
-local ZPOS64_T zip64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)
-{
+local ZPOS64_T zip64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) {
   unsigned char* buf;
   ZPOS64_T uSizeFile;
   ZPOS64_T uBackRead;
@@ -595,7 +563,7 @@ local ZPOS64_T zip64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib
         break;
   }
 
-  TRYFREE(buf);
+  free(buf);
   if (uPosFound == 0)
     return 0;
 
@@ -637,8 +605,7 @@ local ZPOS64_T zip64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib
   return relativeOffset;
 }
 
-local int LoadCentralDirectoryRecord(zip64_internal* pziinit)
-{
+local int LoadCentralDirectoryRecord(zip64_internal* pziinit) {
   int err=ZIP_OK;
   ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
 
@@ -648,9 +615,9 @@ local int LoadCentralDirectoryRecord(zip64_internal* pziinit)
   uLong uL;
 
   uLong number_disk;          /* number of the current dist, used for
-                              spaning ZIP, unsupported, always 0*/
+                              spanning ZIP, unsupported, always 0*/
   uLong number_disk_with_CD;  /* number the the disk with central dir, used
-                              for spaning ZIP, unsupported, always 0*/
+                              for spanning ZIP, unsupported, always 0*/
   ZPOS64_T number_entry;
   ZPOS64_T number_entry_CD;      /* total number of entries in
                                 the central dir
@@ -830,7 +797,7 @@ local int LoadCentralDirectoryRecord(zip64_internal* pziinit)
 
       size_central_dir_to_read-=read_this;
     }
-    TRYFREE(buf_read);
+    free(buf_read);
   }
   pziinit->begin_pos = byte_before_the_zipfile;
   pziinit->number_entry = number_entry_CD;
@@ -846,8 +813,7 @@ local int LoadCentralDirectoryRecord(zip64_internal* pziinit)
 
 
 /************************************************************/
-extern zipFile ZEXPORT zipOpen3 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_32_def* pzlib_filefunc64_32_def)
-{
+extern zipFile ZEXPORT zipOpen3(const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_32_def* pzlib_filefunc64_32_def) {
     zip64_internal ziinit;
     zip64_internal* zi;
     int err=ZIP_OK;
@@ -905,9 +871,9 @@ extern zipFile ZEXPORT zipOpen3 (const void *pathname, int append, zipcharpc* gl
     if (err != ZIP_OK)
     {
 #    ifndef NO_ADDFILEINEXISTINGZIP
-        TRYFREE(ziinit.globalcomment);
+        free(ziinit.globalcomment);
 #    endif /* !NO_ADDFILEINEXISTINGZIP*/
-        TRYFREE(zi);
+        free(zi);
         return NULL;
     }
     else
@@ -917,8 +883,7 @@ extern zipFile ZEXPORT zipOpen3 (const void *pathname, int append, zipcharpc* gl
     }
 }
 
-extern zipFile ZEXPORT zipOpen2 (const char *pathname, int append, zipcharpc* globalcomment, zlib_filefunc_def* pzlib_filefunc32_def)
-{
+extern zipFile ZEXPORT zipOpen2(const char *pathname, int append, zipcharpc* globalcomment, zlib_filefunc_def* pzlib_filefunc32_def) {
     if (pzlib_filefunc32_def != NULL)
     {
         zlib_filefunc64_32_def zlib_filefunc64_32_def_fill;
@@ -929,8 +894,7 @@ extern zipFile ZEXPORT zipOpen2 (const char *pathname, int append, zipcharpc* gl
         return zipOpen3(pathname, append, globalcomment, NULL);
 }
 
-extern zipFile ZEXPORT zipOpen2_64 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_def* pzlib_filefunc_def)
-{
+extern zipFile ZEXPORT zipOpen2_64(const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_def* pzlib_filefunc_def) {
     if (pzlib_filefunc_def != NULL)
     {
         zlib_filefunc64_32_def zlib_filefunc64_32_def_fill;
@@ -945,18 +909,15 @@ extern zipFile ZEXPORT zipOpen2_64 (const void *pathname, int append, zipcharpc*
 
 
 
-extern zipFile ZEXPORT zipOpen (const char* pathname, int append)
-{
+extern zipFile ZEXPORT zipOpen(const char* pathname, int append) {
     return zipOpen3((const void*)pathname,append,NULL,NULL);
 }
 
-extern zipFile ZEXPORT zipOpen64 (const void* pathname, int append)
-{
+extern zipFile ZEXPORT zipOpen64(const void* pathname, int append) {
     return zipOpen3(pathname,append,NULL,NULL);
 }
 
-local int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_extrafield_local, const void* extrafield_local)
-{
+local int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_extrafield_local, const void* extrafield_local) {
   /* write the local header */
   int err;
   uInt size_filename = (uInt)strlen(filename);
@@ -1052,14 +1013,13 @@ local int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt s
  It is not done here because then we need to realloc a new buffer since parameters are 'const' and I want to minimize
  unnecessary allocations.
  */
-extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
-                                         const void* extrafield_local, uInt size_extrafield_local,
-                                         const void* extrafield_global, uInt size_extrafield_global,
-                                         const char* comment, int method, int level, int raw,
-                                         int windowBits,int memLevel, int strategy,
-                                         const char* password, uLong crcForCrypting,
-                                         uLong versionMadeBy, uLong flagBase, int zip64)
-{
+extern int ZEXPORT zipOpenNewFileInZip4_64(zipFile file, const char* filename, const zip_fileinfo* zipfi,
+                                           const void* extrafield_local, uInt size_extrafield_local,
+                                           const void* extrafield_global, uInt size_extrafield_global,
+                                           const char* comment, int method, int level, int raw,
+                                           int windowBits,int memLevel, int strategy,
+                                           const char* password, uLong crcForCrypting,
+                                           uLong versionMadeBy, uLong flagBase, int zip64) {
     zip64_internal* zi;
     uInt size_filename;
     uInt size_comment;
@@ -1262,35 +1222,33 @@ extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename,
     return err;
 }
 
-extern int ZEXPORT zipOpenNewFileInZip4 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
-                                         const void* extrafield_local, uInt size_extrafield_local,
-                                         const void* extrafield_global, uInt size_extrafield_global,
-                                         const char* comment, int method, int level, int raw,
-                                         int windowBits,int memLevel, int strategy,
-                                         const char* password, uLong crcForCrypting,
-                                         uLong versionMadeBy, uLong flagBase)
-{
-    return zipOpenNewFileInZip4_64 (file, filename, zipfi,
-                                 extrafield_local, size_extrafield_local,
-                                 extrafield_global, size_extrafield_global,
-                                 comment, method, level, raw,
-                                 windowBits, memLevel, strategy,
-                                 password, crcForCrypting, versionMadeBy, flagBase, 0);
+extern int ZEXPORT zipOpenNewFileInZip4(zipFile file, const char* filename, const zip_fileinfo* zipfi,
+                                        const void* extrafield_local, uInt size_extrafield_local,
+                                        const void* extrafield_global, uInt size_extrafield_global,
+                                        const char* comment, int method, int level, int raw,
+                                        int windowBits,int memLevel, int strategy,
+                                        const char* password, uLong crcForCrypting,
+                                        uLong versionMadeBy, uLong flagBase) {
+    return zipOpenNewFileInZip4_64(file, filename, zipfi,
+                                   extrafield_local, size_extrafield_local,
+                                   extrafield_global, size_extrafield_global,
+                                   comment, method, level, raw,
+                                   windowBits, memLevel, strategy,
+                                   password, crcForCrypting, versionMadeBy, flagBase, 0);
 }
 
-extern int ZEXPORT zipOpenNewFileInZip3 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
-                                         const void* extrafield_local, uInt size_extrafield_local,
-                                         const void* extrafield_global, uInt size_extrafield_global,
-                                         const char* comment, int method, int level, int raw,
-                                         int windowBits,int memLevel, int strategy,
-                                         const char* password, uLong crcForCrypting)
-{
-    return zipOpenNewFileInZip4_64 (file, filename, zipfi,
-                                 extrafield_local, size_extrafield_local,
-                                 extrafield_global, size_extrafield_global,
-                                 comment, method, level, raw,
-                                 windowBits, memLevel, strategy,
-                                 password, crcForCrypting, VERSIONMADEBY, 0, 0);
+extern int ZEXPORT zipOpenNewFileInZip3(zipFile file, const char* filename, const zip_fileinfo* zipfi,
+                                        const void* extrafield_local, uInt size_extrafield_local,
+                                        const void* extrafield_global, uInt size_extrafield_global,
+                                        const char* comment, int method, int level, int raw,
+                                        int windowBits,int memLevel, int strategy,
+                                        const char* password, uLong crcForCrypting) {
+    return zipOpenNewFileInZip4_64(file, filename, zipfi,
+                                   extrafield_local, size_extrafield_local,
+                                   extrafield_global, size_extrafield_global,
+                                   comment, method, level, raw,
+                                   windowBits, memLevel, strategy,
+                                   password, crcForCrypting, VERSIONMADEBY, 0, 0);
 }
 
 extern int ZEXPORT zipOpenNewFileInZip3_64(zipFile file, const char* filename, const zip_fileinfo* zipfi,
@@ -1298,70 +1256,64 @@ extern int ZEXPORT zipOpenNewFileInZip3_64(zipFile file, const char* filename, c
                                          const void* extrafield_global, uInt size_extrafield_global,
                                          const char* comment, int method, int level, int raw,
                                          int windowBits,int memLevel, int strategy,
-                                         const char* password, uLong crcForCrypting, int zip64)
-{
-    return zipOpenNewFileInZip4_64 (file, filename, zipfi,
-                                 extrafield_local, size_extrafield_local,
-                                 extrafield_global, size_extrafield_global,
-                                 comment, method, level, raw,
-                                 windowBits, memLevel, strategy,
-                                 password, crcForCrypting, VERSIONMADEBY, 0, zip64);
+                                         const char* password, uLong crcForCrypting, int zip64) {
+    return zipOpenNewFileInZip4_64(file, filename, zipfi,
+                                   extrafield_local, size_extrafield_local,
+                                   extrafield_global, size_extrafield_global,
+                                   comment, method, level, raw,
+                                   windowBits, memLevel, strategy,
+                                   password, crcForCrypting, VERSIONMADEBY, 0, zip64);
 }
 
 extern int ZEXPORT zipOpenNewFileInZip2(zipFile file, const char* filename, const zip_fileinfo* zipfi,
                                         const void* extrafield_local, uInt size_extrafield_local,
                                         const void* extrafield_global, uInt size_extrafield_global,
-                                        const char* comment, int method, int level, int raw)
-{
-    return zipOpenNewFileInZip4_64 (file, filename, zipfi,
-                                 extrafield_local, size_extrafield_local,
-                                 extrafield_global, size_extrafield_global,
-                                 comment, method, level, raw,
-                                 -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
-                                 NULL, 0, VERSIONMADEBY, 0, 0);
+                                        const char* comment, int method, int level, int raw) {
+    return zipOpenNewFileInZip4_64(file, filename, zipfi,
+                                   extrafield_local, size_extrafield_local,
+                                   extrafield_global, size_extrafield_global,
+                                   comment, method, level, raw,
+                                   -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+                                   NULL, 0, VERSIONMADEBY, 0, 0);
 }
 
 extern int ZEXPORT zipOpenNewFileInZip2_64(zipFile file, const char* filename, const zip_fileinfo* zipfi,
-                                        const void* extrafield_local, uInt size_extrafield_local,
-                                        const void* extrafield_global, uInt size_extrafield_global,
-                                        const char* comment, int method, int level, int raw, int zip64)
-{
-    return zipOpenNewFileInZip4_64 (file, filename, zipfi,
-                                 extrafield_local, size_extrafield_local,
-                                 extrafield_global, size_extrafield_global,
-                                 comment, method, level, raw,
-                                 -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
-                                 NULL, 0, VERSIONMADEBY, 0, zip64);
+                                           const void* extrafield_local, uInt size_extrafield_local,
+                                           const void* extrafield_global, uInt size_extrafield_global,
+                                           const char* comment, int method, int level, int raw, int zip64) {
+    return zipOpenNewFileInZip4_64(file, filename, zipfi,
+                                   extrafield_local, size_extrafield_local,
+                                   extrafield_global, size_extrafield_global,
+                                   comment, method, level, raw,
+                                   -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+                                   NULL, 0, VERSIONMADEBY, 0, zip64);
 }
 
-extern int ZEXPORT zipOpenNewFileInZip64 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
-                                        const void* extrafield_local, uInt size_extrafield_local,
-                                        const void*extrafield_global, uInt size_extrafield_global,
-                                        const char* comment, int method, int level, int zip64)
-{
-    return zipOpenNewFileInZip4_64 (file, filename, zipfi,
-                                 extrafield_local, size_extrafield_local,
-                                 extrafield_global, size_extrafield_global,
-                                 comment, method, level, 0,
-                                 -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
-                                 NULL, 0, VERSIONMADEBY, 0, zip64);
+extern int ZEXPORT zipOpenNewFileInZip64(zipFile file, const char* filename, const zip_fileinfo* zipfi,
+                                         const void* extrafield_local, uInt size_extrafield_local,
+                                         const void*extrafield_global, uInt size_extrafield_global,
+                                         const char* comment, int method, int level, int zip64) {
+    return zipOpenNewFileInZip4_64(file, filename, zipfi,
+                                   extrafield_local, size_extrafield_local,
+                                   extrafield_global, size_extrafield_global,
+                                   comment, method, level, 0,
+                                   -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+                                   NULL, 0, VERSIONMADEBY, 0, zip64);
 }
 
-extern int ZEXPORT zipOpenNewFileInZip (zipFile file, const char* filename, const zip_fileinfo* zipfi,
-                                        const void* extrafield_local, uInt size_extrafield_local,
-                                        const void*extrafield_global, uInt size_extrafield_global,
-                                        const char* comment, int method, int level)
-{
-    return zipOpenNewFileInZip4_64 (file, filename, zipfi,
-                                 extrafield_local, size_extrafield_local,
-                                 extrafield_global, size_extrafield_global,
-                                 comment, method, level, 0,
-                                 -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
-                                 NULL, 0, VERSIONMADEBY, 0, 0);
+extern int ZEXPORT zipOpenNewFileInZip(zipFile file, const char* filename, const zip_fileinfo* zipfi,
+                                       const void* extrafield_local, uInt size_extrafield_local,
+                                       const void*extrafield_global, uInt size_extrafield_global,
+                                       const char* comment, int method, int level) {
+    return zipOpenNewFileInZip4_64(file, filename, zipfi,
+                                   extrafield_local, size_extrafield_local,
+                                   extrafield_global, size_extrafield_global,
+                                   comment, method, level, 0,
+                                   -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+                                   NULL, 0, VERSIONMADEBY, 0, 0);
 }
 
-local int zip64FlushWriteBuffer(zip64_internal* zi)
-{
+local int zip64FlushWriteBuffer(zip64_internal* zi) {
     int err=ZIP_OK;
 
     if (zi->ci.encrypt != 0)
@@ -1399,8 +1351,7 @@ local int zip64FlushWriteBuffer(zip64_internal* zi)
     return err;
 }
 
-extern int ZEXPORT zipWriteInFileInZip (zipFile file,const void* buf,unsigned int len)
-{
+extern int ZEXPORT zipWriteInFileInZip(zipFile file, const void* buf, unsigned int len) {
     zip64_internal* zi;
     int err=ZIP_OK;
 
@@ -1450,7 +1401,7 @@ extern int ZEXPORT zipWriteInFileInZip (zipFile file,const void* buf,unsigned in
     else
 #endif
     {
-      zi->ci.stream.next_in = (Bytef*)buf;
+      zi->ci.stream.next_in = (Bytef*)(uintptr_t)buf;
       zi->ci.stream.avail_in = len;
 
       while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0))
@@ -1501,13 +1452,11 @@ extern int ZEXPORT zipWriteInFileInZip (zipFile file,const void* buf,unsigned in
     return err;
 }
 
-extern int ZEXPORT zipCloseFileInZipRaw (zipFile file, uLong uncompressed_size, uLong crc32)
-{
+extern int ZEXPORT zipCloseFileInZipRaw(zipFile file, uLong uncompressed_size, uLong crc32) {
     return zipCloseFileInZipRaw64 (file, uncompressed_size, crc32);
 }
 
-extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_size, uLong crc32)
-{
+extern int ZEXPORT zipCloseFileInZipRaw64(zipFile file, ZPOS64_T uncompressed_size, uLong crc32) {
     zip64_internal* zi;
     ZPOS64_T compressed_size;
     uLong invalidValue = 0xffffffff;
@@ -1742,13 +1691,11 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
     return err;
 }
 
-extern int ZEXPORT zipCloseFileInZip (zipFile file)
-{
+extern int ZEXPORT zipCloseFileInZip(zipFile file) {
     return zipCloseFileInZipRaw (file,0,0);
 }
 
-local int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T zip64eocd_pos_inzip)
-{
+local int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T zip64eocd_pos_inzip) {
   int err = ZIP_OK;
   ZPOS64_T pos = zip64eocd_pos_inzip - zi->add_position_when_writing_offset;
 
@@ -1769,8 +1716,7 @@ local int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T z
     return err;
 }
 
-local int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip)
-{
+local int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip) {
   int err = ZIP_OK;
 
   uLong Zip64DataSize = 44;
@@ -1808,8 +1754,8 @@ local int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_
   }
   return err;
 }
-local int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip)
-{
+
+local int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip) {
   int err = ZIP_OK;
 
   /*signature*/
@@ -1856,8 +1802,7 @@ local int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centr
    return err;
 }
 
-local int Write_GlobalComment(zip64_internal* zi, const char* global_comment)
-{
+local int Write_GlobalComment(zip64_internal* zi, const char* global_comment) {
   int err = ZIP_OK;
   uInt size_global_comment = 0;
 
@@ -1874,8 +1819,7 @@ local int Write_GlobalComment(zip64_internal* zi, const char* global_comment)
   return err;
 }
 
-extern int ZEXPORT zipClose (zipFile file, const char* global_comment)
-{
+extern int ZEXPORT zipClose(zipFile file, const char* global_comment) {
     zip64_internal* zi;
     int err = 0;
     uLong size_centraldir = 0;
@@ -1936,15 +1880,14 @@ extern int ZEXPORT zipClose (zipFile file, const char* global_comment)
             err = ZIP_ERRNO;
 
 #ifndef NO_ADDFILEINEXISTINGZIP
-    TRYFREE(zi->globalcomment);
+    free(zi->globalcomment);
 #endif
-    TRYFREE(zi);
+    free(zi);
 
     return err;
 }
 
-extern int ZEXPORT zipRemoveExtraInfoBlock (char* pData, int* dataLen, short sHeader)
-{
+extern int ZEXPORT zipRemoveExtraInfoBlock(char* pData, int* dataLen, short sHeader) {
   char* p = pData;
   int size = 0;
   char* pNewHeader;
@@ -1996,7 +1939,7 @@ extern int ZEXPORT zipRemoveExtraInfoBlock (char* pData, int* dataLen, short sHe
   else
     retVal = ZIP_ERRNO;
 
-  TRYFREE(pNewHeader);
+  free(pNewHeader);
 
   return retVal;
 }
diff --git a/compat/zlib/contrib/minizip/zip.h b/compat/zlib/contrib/minizip/zip.h
index 7e4509d..5fc0841 100644
--- a/compat/zlib/contrib/minizip/zip.h
+++ b/compat/zlib/contrib/minizip/zip.h
@@ -113,8 +113,8 @@ typedef const char* zipcharpc;
 #define APPEND_STATUS_CREATEAFTER   (1)
 #define APPEND_STATUS_ADDINZIP      (2)
 
-extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
-extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append));
+extern zipFile ZEXPORT zipOpen(const char *pathname, int append);
+extern zipFile ZEXPORT zipOpen64(const void *pathname, int append);
 /*
   Create a zipfile.
      pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
@@ -131,46 +131,46 @@ extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append));
 
 /* Note : there is no delete function into a zipfile.
    If you want delete file into a zipfile, you must open a zipfile, and create another
-   Of couse, you can use RAW reading and writing to copy the file you did not want delte
+   Of course, you can use RAW reading and writing to copy the file you did not want delete
 */
 
-extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
-                                   int append,
-                                   zipcharpc* globalcomment,
-                                   zlib_filefunc_def* pzlib_filefunc_def));
+extern zipFile ZEXPORT zipOpen2(const char *pathname,
+                                int append,
+                                zipcharpc* globalcomment,
+                                zlib_filefunc_def* pzlib_filefunc_def);
 
-extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname,
+extern zipFile ZEXPORT zipOpen2_64(const void *pathname,
                                    int append,
                                    zipcharpc* globalcomment,
-                                   zlib_filefunc64_def* pzlib_filefunc_def));
-
-extern zipFile ZEXPORT zipOpen3 OF((const void *pathname,
-                                    int append,
-                                    zipcharpc* globalcomment,
-                                    zlib_filefunc64_32_def* pzlib_filefunc64_32_def));
-
-extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
-                       const char* filename,
-                       const zip_fileinfo* zipfi,
-                       const void* extrafield_local,
-                       uInt size_extrafield_local,
-                       const void* extrafield_global,
-                       uInt size_extrafield_global,
-                       const char* comment,
-                       int method,
-                       int level));
-
-extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file,
-                       const char* filename,
-                       const zip_fileinfo* zipfi,
-                       const void* extrafield_local,
-                       uInt size_extrafield_local,
-                       const void* extrafield_global,
-                       uInt size_extrafield_global,
-                       const char* comment,
-                       int method,
-                       int level,
-                       int zip64));
+                                   zlib_filefunc64_def* pzlib_filefunc_def);
+
+extern zipFile ZEXPORT zipOpen3(const void *pathname,
+                                int append,
+                                zipcharpc* globalcomment,
+                                zlib_filefunc64_32_def* pzlib_filefunc64_32_def);
+
+extern int ZEXPORT zipOpenNewFileInZip(zipFile file,
+                                       const char* filename,
+                                       const zip_fileinfo* zipfi,
+                                       const void* extrafield_local,
+                                       uInt size_extrafield_local,
+                                       const void* extrafield_global,
+                                       uInt size_extrafield_global,
+                                       const char* comment,
+                                       int method,
+                                       int level);
+
+extern int ZEXPORT zipOpenNewFileInZip64(zipFile file,
+                                         const char* filename,
+                                         const zip_fileinfo* zipfi,
+                                         const void* extrafield_local,
+                                         uInt size_extrafield_local,
+                                         const void* extrafield_global,
+                                         uInt size_extrafield_global,
+                                         const char* comment,
+                                         int method,
+                                         int level,
+                                         int zip64);
 
 /*
   Open a file in the ZIP for writing.
@@ -189,70 +189,69 @@ extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file,
 */
 
 
-extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
-                                            const char* filename,
-                                            const zip_fileinfo* zipfi,
-                                            const void* extrafield_local,
-                                            uInt size_extrafield_local,
-                                            const void* extrafield_global,
-                                            uInt size_extrafield_global,
-                                            const char* comment,
-                                            int method,
-                                            int level,
-                                            int raw));
-
-
-extern int ZEXPORT zipOpenNewFileInZip2_64 OF((zipFile file,
-                                            const char* filename,
-                                            const zip_fileinfo* zipfi,
-                                            const void* extrafield_local,
-                                            uInt size_extrafield_local,
-                                            const void* extrafield_global,
-                                            uInt size_extrafield_global,
-                                            const char* comment,
-                                            int method,
-                                            int level,
-                                            int raw,
-                                            int zip64));
+extern int ZEXPORT zipOpenNewFileInZip2(zipFile file,
+                                        const char* filename,
+                                        const zip_fileinfo* zipfi,
+                                        const void* extrafield_local,
+                                        uInt size_extrafield_local,
+                                        const void* extrafield_global,
+                                        uInt size_extrafield_global,
+                                        const char* comment,
+                                        int method,
+                                        int level,
+                                        int raw);
+
+
+extern int ZEXPORT zipOpenNewFileInZip2_64(zipFile file,
+                                           const char* filename,
+                                           const zip_fileinfo* zipfi,
+                                           const void* extrafield_local,
+                                           uInt size_extrafield_local,
+                                           const void* extrafield_global,
+                                           uInt size_extrafield_global,
+                                           const char* comment,
+                                           int method,
+                                           int level,
+                                           int raw,
+                                           int zip64);
 /*
   Same than zipOpenNewFileInZip, except if raw=1, we write raw file
  */
 
-extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
-                                            const char* filename,
-                                            const zip_fileinfo* zipfi,
-                                            const void* extrafield_local,
-                                            uInt size_extrafield_local,
-                                            const void* extrafield_global,
-                                            uInt size_extrafield_global,
-                                            const char* comment,
-                                            int method,
-                                            int level,
-                                            int raw,
-                                            int windowBits,
-                                            int memLevel,
-                                            int strategy,
-                                            const char* password,
-                                            uLong crcForCrypting));
-
-extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file,
-                                            const char* filename,
-                                            const zip_fileinfo* zipfi,
-                                            const void* extrafield_local,
-                                            uInt size_extrafield_local,
-                                            const void* extrafield_global,
-                                            uInt size_extrafield_global,
-                                            const char* comment,
-                                            int method,
-                                            int level,
-                                            int raw,
-                                            int windowBits,
-                                            int memLevel,
-                                            int strategy,
-                                            const char* password,
-                                            uLong crcForCrypting,
-                                            int zip64
-                                            ));
+extern int ZEXPORT zipOpenNewFileInZip3(zipFile file,
+                                        const char* filename,
+                                        const zip_fileinfo* zipfi,
+                                        const void* extrafield_local,
+                                        uInt size_extrafield_local,
+                                        const void* extrafield_global,
+                                        uInt size_extrafield_global,
+                                        const char* comment,
+                                        int method,
+                                        int level,
+                                        int raw,
+                                        int windowBits,
+                                        int memLevel,
+                                        int strategy,
+                                        const char* password,
+                                        uLong crcForCrypting);
+
+extern int ZEXPORT zipOpenNewFileInZip3_64(zipFile file,
+                                           const char* filename,
+                                           const zip_fileinfo* zipfi,
+                                           const void* extrafield_local,
+                                           uInt size_extrafield_local,
+                                           const void* extrafield_global,
+                                           uInt size_extrafield_global,
+                                           const char* comment,
+                                           int method,
+                                           int level,
+                                           int raw,
+                                           int windowBits,
+                                           int memLevel,
+                                           int strategy,
+                                           const char* password,
+                                           uLong crcForCrypting,
+                                           int zip64);
 
 /*
   Same than zipOpenNewFileInZip2, except
@@ -261,47 +260,45 @@ extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file,
     crcForCrypting : crc of file to compress (needed for crypting)
  */
 
-extern int ZEXPORT zipOpenNewFileInZip4 OF((zipFile file,
-                                            const char* filename,
-                                            const zip_fileinfo* zipfi,
-                                            const void* extrafield_local,
-                                            uInt size_extrafield_local,
-                                            const void* extrafield_global,
-                                            uInt size_extrafield_global,
-                                            const char* comment,
-                                            int method,
-                                            int level,
-                                            int raw,
-                                            int windowBits,
-                                            int memLevel,
-                                            int strategy,
-                                            const char* password,
-                                            uLong crcForCrypting,
-                                            uLong versionMadeBy,
-                                            uLong flagBase
-                                            ));
-
-
-extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file,
-                                            const char* filename,
-                                            const zip_fileinfo* zipfi,
-                                            const void* extrafield_local,
-                                            uInt size_extrafield_local,
-                                            const void* extrafield_global,
-                                            uInt size_extrafield_global,
-                                            const char* comment,
-                                            int method,
-                                            int level,
-                                            int raw,
-                                            int windowBits,
-                                            int memLevel,
-                                            int strategy,
-                                            const char* password,
-                                            uLong crcForCrypting,
-                                            uLong versionMadeBy,
-                                            uLong flagBase,
-                                            int zip64
-                                            ));
+extern int ZEXPORT zipOpenNewFileInZip4(zipFile file,
+                                        const char* filename,
+                                        const zip_fileinfo* zipfi,
+                                        const void* extrafield_local,
+                                        uInt size_extrafield_local,
+                                        const void* extrafield_global,
+                                        uInt size_extrafield_global,
+                                        const char* comment,
+                                        int method,
+                                        int level,
+                                        int raw,
+                                        int windowBits,
+                                        int memLevel,
+                                        int strategy,
+                                        const char* password,
+                                        uLong crcForCrypting,
+                                        uLong versionMadeBy,
+                                        uLong flagBase);
+
+
+extern int ZEXPORT zipOpenNewFileInZip4_64(zipFile file,
+                                           const char* filename,
+                                           const zip_fileinfo* zipfi,
+                                           const void* extrafield_local,
+                                           uInt size_extrafield_local,
+                                           const void* extrafield_global,
+                                           uInt size_extrafield_global,
+                                           const char* comment,
+                                           int method,
+                                           int level,
+                                           int raw,
+                                           int windowBits,
+                                           int memLevel,
+                                           int strategy,
+                                           const char* password,
+                                           uLong crcForCrypting,
+                                           uLong versionMadeBy,
+                                           uLong flagBase,
+                                           int zip64);
 /*
   Same than zipOpenNewFileInZip4, except
     versionMadeBy : value for Version made by field
@@ -309,25 +306,25 @@ extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file,
  */
 
 
-extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
-                       const void* buf,
-                       unsigned len));
+extern int ZEXPORT zipWriteInFileInZip(zipFile file,
+                                       const void* buf,
+                                       unsigned len);
 /*
   Write data in the zipfile
 */
 
-extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+extern int ZEXPORT zipCloseFileInZip(zipFile file);
 /*
   Close the current file in the zipfile
 */
 
-extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
-                                            uLong uncompressed_size,
-                                            uLong crc32));
+extern int ZEXPORT zipCloseFileInZipRaw(zipFile file,
+                                        uLong uncompressed_size,
+                                        uLong crc32);
 
-extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file,
-                                            ZPOS64_T uncompressed_size,
-                                            uLong crc32));
+extern int ZEXPORT zipCloseFileInZipRaw64(zipFile file,
+                                          ZPOS64_T uncompressed_size,
+                                          uLong crc32);
 
 /*
   Close the current file in the zipfile, for file opened with
@@ -335,14 +332,14 @@ extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file,
   uncompressed_size and crc32 are value for the uncompressed size
 */
 
-extern int ZEXPORT zipClose OF((zipFile file,
-                const char* global_comment));
+extern int ZEXPORT zipClose(zipFile file,
+                            const char* global_comment);
 /*
   Close the zipfile
 */
 
 
-extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader));
+extern int ZEXPORT zipRemoveExtraInfoBlock(char* pData, int* dataLen, short sHeader);
 /*
   zipRemoveExtraInfoBlock -  Added by Mathias Svensson
 
diff --git a/compat/zlib/contrib/pascal/zlibpas.pas b/compat/zlib/contrib/pascal/zlibpas.pas
index bf3fff6..a2b24a5 100644
--- a/compat/zlib/contrib/pascal/zlibpas.pas
+++ b/compat/zlib/contrib/pascal/zlibpas.pas
@@ -10,7 +10,7 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.13';
+  ZLIB_VERSION = '1.3.0';
   ZLIB_VERNUM  = $12a0;
 
 type
diff --git a/compat/zlib/contrib/testzlib/testzlib.c b/compat/zlib/contrib/testzlib/testzlib.c
index 8626c92..c4b0148 100644
--- a/compat/zlib/contrib/testzlib/testzlib.c
+++ b/compat/zlib/contrib/testzlib/testzlib.c
@@ -169,7 +169,7 @@ int main(int argc, char *argv[])
         printf("error reading %s\n",argv[1]);
         return 1;
     }
-    else printf("file %s read, %u bytes\n",argv[1],lFileSize);
+    else printf("file %s read, %ld bytes\n",argv[1],lFileSize);
 
     if (argc>=3)
         BlockSizeCompress=atol(argv[2]);
diff --git a/compat/zlib/contrib/untgz/untgz.c b/compat/zlib/contrib/untgz/untgz.c
index 2c391e5..7857921 100644
--- a/compat/zlib/contrib/untgz/untgz.c
+++ b/compat/zlib/contrib/untgz/untgz.c
@@ -4,6 +4,22 @@
  * written by Pedro A. Aranda Gutierrez <paag@tid.es>
  * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
  * various fixes by Cosmin Truta <cosmint@cs.ubbcluj.ro>
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty.  In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
  */
 
 #include <stdio.h>
@@ -14,15 +30,10 @@
 
 #include "zlib.h"
 
-#ifdef unix
-#  include <unistd.h>
-#else
+#ifdef _WIN32
 #  include <direct.h>
 #  include <io.h>
-#endif
-
-#ifdef WIN32
-#include <windows.h>
+#  include <windows.h>
 #  ifndef F_OK
 #    define F_OK  0
 #  endif
@@ -33,6 +44,8 @@
 #    define strdup(str)         _strdup(str)
 #  endif
 #else
+#  include <sys/stat.h>
+#  include <unistd.h>
 #  include <utime.h>
 #endif
 
@@ -102,28 +115,14 @@ struct attr_item
 
 enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID };
 
-char *TGZfname          OF((const char *));
-void TGZnotfound        OF((const char *));
-
-int getoct              OF((char *, int));
-char *strtime           OF((time_t *));
-int setfiletime         OF((char *, time_t));
-void push_attr          OF((struct attr_item **, char *, int, time_t));
-void restore_attr       OF((struct attr_item **));
-
-int ExprMatch           OF((char *, char *));
-
-int makedir             OF((char *));
-int matchname           OF((int, int, char **, char *));
-
-void error              OF((const char *));
-int tar                 OF((gzFile, int, int, int, char **));
-
-void help               OF((int));
-int main                OF((int, char **));
-
 char *prog;
 
+void error(const char *msg)
+{
+  fprintf(stderr, "%s: %s\n", prog, msg);
+  exit(1);
+}
+
 const char *TGZsuffix[] = { "\0", ".tar", ".tar.gz", ".taz", ".tgz", NULL };
 
 /* return the file name of the TGZ archive */
@@ -205,7 +204,7 @@ char *strtime (time_t *t)
 
 int setfiletime (char *fname,time_t ftime)
 {
-#ifdef WIN32
+#ifdef _WIN32
   static int isWinNT = -1;
   SYSTEMTIME st;
   FILETIME locft, modft;
@@ -590,12 +589,6 @@ void help(int exitval)
   exit(exitval);
 }
 
-void error(const char *msg)
-{
-  fprintf(stderr, "%s: %s\n", prog, msg);
-  exit(1);
-}
-
 
 /* ============================================================ */
 
@@ -608,7 +601,7 @@ int main(int argc,char **argv)
     int         action = TGZ_EXTRACT;
     int         arg = 1;
     char        *TGZfile;
-    gzFile      *f;
+    gzFile      f;
 
     prog = strrchr(argv[0],'\\');
     if (prog == NULL)
diff --git a/compat/zlib/contrib/vstudio/readme.txt b/compat/zlib/contrib/vstudio/readme.txt
index 17e693f..05ba487 100644
--- a/compat/zlib/contrib/vstudio/readme.txt
+++ b/compat/zlib/contrib/vstudio/readme.txt
@@ -1,4 +1,4 @@
-Building instructions for the DLL versions of Zlib 1.2.13

+Building instructions for the DLL versions of Zlib 1.3.0

 ========================================================

 

 This directory contains projects that build zlib and minizip using

diff --git a/compat/zlib/contrib/vstudio/vc10/zlib.rc b/compat/zlib/contrib/vstudio/vc10/zlib.rc
index 8760274..29af8e1 100644
--- a/compat/zlib/contrib/vstudio/vc10/zlib.rc
+++ b/compat/zlib/contrib/vstudio/vc10/zlib.rc
@@ -2,8 +2,8 @@
 

 #define IDR_VERSION1  1

 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE

-  FILEVERSION	 1, 2, 13, 0

-  PRODUCTVERSION 1, 2, 13, 0

+  FILEVERSION	 1, 3, 0, 0

+  PRODUCTVERSION 1, 3, 0, 0

   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK

   FILEFLAGS	0

   FILEOS	VOS_DOS_WINDOWS32

@@ -17,12 +17,12 @@ BEGIN
 

     BEGIN

       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"

-      VALUE "FileVersion",	"1.2.13\0"

+      VALUE "FileVersion",	"1.3.0\0"

       VALUE "InternalName",	"zlib\0"

       VALUE "OriginalFilename",	"zlibwapi.dll\0"

       VALUE "ProductName",	"ZLib.DLL\0"

       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"

-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"

+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"

     END

   END

   BLOCK "VarFileInfo"

diff --git a/compat/zlib/contrib/vstudio/vc10/zlibvc.def b/compat/zlib/contrib/vstudio/vc10/zlibvc.def
index ba09bc1..f28aa6c 100644
--- a/compat/zlib/contrib/vstudio/vc10/zlibvc.def
+++ b/compat/zlib/contrib/vstudio/vc10/zlibvc.def
@@ -1,7 +1,7 @@
 LIBRARY

 ; zlib data compression and ZIP file I/O library

 

-VERSION		1.2

+VERSION		1.3

 

 EXPORTS

         adler32                                  @1

diff --git a/compat/zlib/contrib/vstudio/vc11/zlib.rc b/compat/zlib/contrib/vstudio/vc11/zlib.rc
index 8760274..29af8e1 100644
--- a/compat/zlib/contrib/vstudio/vc11/zlib.rc
+++ b/compat/zlib/contrib/vstudio/vc11/zlib.rc
@@ -2,8 +2,8 @@
 

 #define IDR_VERSION1  1

 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE

-  FILEVERSION	 1, 2, 13, 0

-  PRODUCTVERSION 1, 2, 13, 0

+  FILEVERSION	 1, 3, 0, 0

+  PRODUCTVERSION 1, 3, 0, 0

   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK

   FILEFLAGS	0

   FILEOS	VOS_DOS_WINDOWS32

@@ -17,12 +17,12 @@ BEGIN
 

     BEGIN

       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"

-      VALUE "FileVersion",	"1.2.13\0"

+      VALUE "FileVersion",	"1.3.0\0"

       VALUE "InternalName",	"zlib\0"

       VALUE "OriginalFilename",	"zlibwapi.dll\0"

       VALUE "ProductName",	"ZLib.DLL\0"

       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"

-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"

+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"

     END

   END

   BLOCK "VarFileInfo"

diff --git a/compat/zlib/contrib/vstudio/vc11/zlibvc.def b/compat/zlib/contrib/vstudio/vc11/zlibvc.def
index ba09bc1..f28aa6c 100644
--- a/compat/zlib/contrib/vstudio/vc11/zlibvc.def
+++ b/compat/zlib/contrib/vstudio/vc11/zlibvc.def
@@ -1,7 +1,7 @@
 LIBRARY

 ; zlib data compression and ZIP file I/O library

 

-VERSION		1.2

+VERSION		1.3

 

 EXPORTS

         adler32                                  @1

diff --git a/compat/zlib/contrib/vstudio/vc12/zlib.rc b/compat/zlib/contrib/vstudio/vc12/zlib.rc
index cdd7985..57fb31a 100644
--- a/compat/zlib/contrib/vstudio/vc12/zlib.rc
+++ b/compat/zlib/contrib/vstudio/vc12/zlib.rc
@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 13, 0
-  PRODUCTVERSION 1, 2, 13, 0
+  FILEVERSION	 1, 3, 0, 0
+  PRODUCTVERSION 1, 3, 0, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.13\0"
+      VALUE "FileVersion",	"1.3.0\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"
diff --git a/compat/zlib/contrib/vstudio/vc12/zlibvc.def b/compat/zlib/contrib/vstudio/vc12/zlibvc.def
index ba09bc1..f28aa6c 100644
--- a/compat/zlib/contrib/vstudio/vc12/zlibvc.def
+++ b/compat/zlib/contrib/vstudio/vc12/zlibvc.def
@@ -1,7 +1,7 @@
 LIBRARY

 ; zlib data compression and ZIP file I/O library

 

-VERSION		1.2

+VERSION		1.3

 

 EXPORTS

         adler32                                  @1

diff --git a/compat/zlib/contrib/vstudio/vc14/zlib.rc b/compat/zlib/contrib/vstudio/vc14/zlib.rc
index cdd7985..57fb31a 100644
--- a/compat/zlib/contrib/vstudio/vc14/zlib.rc
+++ b/compat/zlib/contrib/vstudio/vc14/zlib.rc
@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 13, 0
-  PRODUCTVERSION 1, 2, 13, 0
+  FILEVERSION	 1, 3, 0, 0
+  PRODUCTVERSION 1, 3, 0, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.13\0"
+      VALUE "FileVersion",	"1.3.0\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"
diff --git a/compat/zlib/contrib/vstudio/vc14/zlibvc.def b/compat/zlib/contrib/vstudio/vc14/zlibvc.def
index ba09bc1..f28aa6c 100644
--- a/compat/zlib/contrib/vstudio/vc14/zlibvc.def
+++ b/compat/zlib/contrib/vstudio/vc14/zlibvc.def
@@ -1,7 +1,7 @@
 LIBRARY

 ; zlib data compression and ZIP file I/O library

 

-VERSION		1.2

+VERSION		1.3

 

 EXPORTS

         adler32                                  @1

diff --git a/compat/zlib/contrib/vstudio/vc9/zlib.rc b/compat/zlib/contrib/vstudio/vc9/zlib.rc
index 8760274..29af8e1 100644
--- a/compat/zlib/contrib/vstudio/vc9/zlib.rc
+++ b/compat/zlib/contrib/vstudio/vc9/zlib.rc
@@ -2,8 +2,8 @@
 

 #define IDR_VERSION1  1

 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE

-  FILEVERSION	 1, 2, 13, 0

-  PRODUCTVERSION 1, 2, 13, 0

+  FILEVERSION	 1, 3, 0, 0

+  PRODUCTVERSION 1, 3, 0, 0

   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK

   FILEFLAGS	0

   FILEOS	VOS_DOS_WINDOWS32

@@ -17,12 +17,12 @@ BEGIN
 

     BEGIN

       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"

-      VALUE "FileVersion",	"1.2.13\0"

+      VALUE "FileVersion",	"1.3.0\0"

       VALUE "InternalName",	"zlib\0"

       VALUE "OriginalFilename",	"zlibwapi.dll\0"

       VALUE "ProductName",	"ZLib.DLL\0"

       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"

-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"

+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"

     END

   END

   BLOCK "VarFileInfo"

diff --git a/compat/zlib/contrib/vstudio/vc9/zlibvc.def b/compat/zlib/contrib/vstudio/vc9/zlibvc.def
index ba09bc1..f28aa6c 100644
--- a/compat/zlib/contrib/vstudio/vc9/zlibvc.def
+++ b/compat/zlib/contrib/vstudio/vc9/zlibvc.def
@@ -1,7 +1,7 @@
 LIBRARY

 ; zlib data compression and ZIP file I/O library

 

-VERSION		1.2

+VERSION		1.3

 

 EXPORTS

         adler32                                  @1

diff --git a/compat/zlib/crc32.c b/compat/zlib/crc32.c
index f8357b0..6c38f5c 100644
--- a/compat/zlib/crc32.c
+++ b/compat/zlib/crc32.c
@@ -103,19 +103,6 @@
 #  define ARMCRC32
 #endif
 
-/* Local functions. */
-local z_crc_t multmodp OF((z_crc_t a, z_crc_t b));
-local z_crc_t x2nmodp OF((z_off64_t n, unsigned k));
-
-#if defined(W) && (!defined(ARMCRC32) || defined(DYNAMIC_CRC_TABLE))
-    local z_word_t byte_swap OF((z_word_t word));
-#endif
-
-#if defined(W) && !defined(ARMCRC32)
-    local z_crc_t crc_word OF((z_word_t data));
-    local z_word_t crc_word_big OF((z_word_t data));
-#endif
-
 #if defined(W) && (!defined(ARMCRC32) || defined(DYNAMIC_CRC_TABLE))
 /*
   Swap the bytes in a z_word_t to convert between little and big endian. Any
@@ -123,9 +110,7 @@ local z_crc_t x2nmodp OF((z_off64_t n, unsigned k));
   instruction, if one is available. This assumes that word_t is either 32 bits
   or 64 bits.
  */
-local z_word_t byte_swap(word)
-    z_word_t word;
-{
+local z_word_t byte_swap(z_word_t word) {
 #  if W == 8
     return
         (word & 0xff00000000000000) >> 56 |
@@ -146,24 +131,77 @@ local z_word_t byte_swap(word)
 }
 #endif
 
+#ifdef DYNAMIC_CRC_TABLE
+/* =========================================================================
+ * Table of powers of x for combining CRC-32s, filled in by make_crc_table()
+ * below.
+ */
+   local z_crc_t FAR x2n_table[32];
+#else
+/* =========================================================================
+ * Tables for byte-wise and braided CRC-32 calculations, and a table of powers
+ * of x for combining CRC-32s, all made by make_crc_table().
+ */
+#  include "crc32.h"
+#endif
+
 /* CRC polynomial. */
 #define POLY 0xedb88320         /* p(x) reflected, with x^32 implied */
 
-#ifdef DYNAMIC_CRC_TABLE
+/*
+  Return a(x) multiplied by b(x) modulo p(x), where p(x) is the CRC polynomial,
+  reflected. For speed, this requires that a not be zero.
+ */
+local z_crc_t multmodp(z_crc_t a, z_crc_t b) {
+    z_crc_t m, p;
+
+    m = (z_crc_t)1 << 31;
+    p = 0;
+    for (;;) {
+        if (a & m) {
+            p ^= b;
+            if ((a & (m - 1)) == 0)
+                break;
+        }
+        m >>= 1;
+        b = b & 1 ? (b >> 1) ^ POLY : b >> 1;
+    }
+    return p;
+}
 
+/*
+  Return x^(n * 2^k) modulo p(x). Requires that x2n_table[] has been
+  initialized.
+ */
+local z_crc_t x2nmodp(z_off64_t n, unsigned k) {
+    z_crc_t p;
+
+    p = (z_crc_t)1 << 31;           /* x^0 == 1 */
+    while (n) {
+        if (n & 1)
+            p = multmodp(x2n_table[k & 31], p);
+        n >>= 1;
+        k++;
+    }
+    return p;
+}
+
+#ifdef DYNAMIC_CRC_TABLE
+/* =========================================================================
+ * Build the tables for byte-wise and braided CRC-32 calculations, and a table
+ * of powers of x for combining CRC-32s.
+ */
 local z_crc_t FAR crc_table[256];
-local z_crc_t FAR x2n_table[32];
-local void make_crc_table OF((void));
 #ifdef W
    local z_word_t FAR crc_big_table[256];
    local z_crc_t FAR crc_braid_table[W][256];
    local z_word_t FAR crc_braid_big_table[W][256];
-   local void braid OF((z_crc_t [][256], z_word_t [][256], int, int));
+   local void braid(z_crc_t [][256], z_word_t [][256], int, int);
 #endif
 #ifdef MAKECRCH
-   local void write_table OF((FILE *, const z_crc_t FAR *, int));
-   local void write_table32hi OF((FILE *, const z_word_t FAR *, int));
-   local void write_table64 OF((FILE *, const z_word_t FAR *, int));
+   local void write_table(FILE *, const z_crc_t FAR *, int);
+   local void write_table32hi(FILE *, const z_word_t FAR *, int);
+   local void write_table64(FILE *, const z_word_t FAR *, int);
 #endif /* MAKECRCH */
 
 /*
@@ -176,7 +214,6 @@ local void make_crc_table OF((void));
 
 /* Definition of once functionality. */
 typedef struct once_s once_t;
-local void once OF((once_t *, void (*)(void)));
 
 /* Check for the availability of atomics. */
 #if defined(__STDC__) && __STDC_VERSION__ >= 201112L && \
@@ -196,10 +233,7 @@ struct once_s {
   invoke once() at the same time. The state must be a once_t initialized with
   ONCE_INIT.
  */
-local void once(state, init)
-    once_t *state;
-    void (*init)(void);
-{
+local void once(once_t *state, void (*init)(void)) {
     if (!atomic_load(&state->done)) {
         if (atomic_flag_test_and_set(&state->begun))
             while (!atomic_load(&state->done))
@@ -222,10 +256,7 @@ struct once_s {
 
 /* Test and set. Alas, not atomic, but tries to minimize the period of
    vulnerability. */
-local int test_and_set OF((int volatile *));
-local int test_and_set(flag)
-    int volatile *flag;
-{
+local int test_and_set(int volatile *flag) {
     int was;
 
     was = *flag;
@@ -234,10 +265,7 @@ local int test_and_set(flag)
 }
 
 /* Run the provided init() function once. This is not thread-safe. */
-local void once(state, init)
-    once_t *state;
-    void (*init)(void);
-{
+local void once(once_t *state, void (*init)(void)) {
     if (!state->done) {
         if (test_and_set(&state->begun))
             while (!state->done)
@@ -279,8 +307,7 @@ local once_t made = ONCE_INIT;
   combinations of CRC register values and incoming bytes.
  */
 
-local void make_crc_table()
-{
+local void make_crc_table(void) {
     unsigned i, j, n;
     z_crc_t p;
 
@@ -447,11 +474,7 @@ local void make_crc_table()
    Write the 32-bit values in table[0..k-1] to out, five per line in
    hexadecimal separated by commas.
  */
-local void write_table(out, table, k)
-    FILE *out;
-    const z_crc_t FAR *table;
-    int k;
-{
+local void write_table(FILE *out, const z_crc_t FAR *table, int k) {
     int n;
 
     for (n = 0; n < k; n++)
@@ -464,11 +487,7 @@ local void write_table(out, table, k)
    Write the high 32-bits of each value in table[0..k-1] to out, five per line
    in hexadecimal separated by commas.
  */
-local void write_table32hi(out, table, k)
-FILE *out;
-const z_word_t FAR *table;
-int k;
-{
+local void write_table32hi(FILE *out, const z_word_t FAR *table, int k) {
     int n;
 
     for (n = 0; n < k; n++)
@@ -484,11 +503,7 @@ int k;
   bits. If not, then the type cast and format string can be adjusted
   accordingly.
  */
-local void write_table64(out, table, k)
-    FILE *out;
-    const z_word_t FAR *table;
-    int k;
-{
+local void write_table64(FILE *out, const z_word_t FAR *table, int k) {
     int n;
 
     for (n = 0; n < k; n++)
@@ -498,8 +513,7 @@ local void write_table64(out, table, k)
 }
 
 /* Actually do the deed. */
-int main()
-{
+int main(void) {
     make_crc_table();
     return 0;
 }
@@ -511,12 +525,7 @@ int main()
   Generate the little and big-endian braid tables for the given n and z_word_t
   size w. Each array must have room for w blocks of 256 elements.
  */
-local void braid(ltl, big, n, w)
-    z_crc_t ltl[][256];
-    z_word_t big[][256];
-    int n;
-    int w;
-{
+local void braid(z_crc_t ltl[][256], z_word_t big[][256], int n, int w) {
     int k;
     z_crc_t i, p, q;
     for (k = 0; k < w; k++) {
@@ -531,69 +540,13 @@ local void braid(ltl, big, n, w)
 }
 #endif
 
-#else /* !DYNAMIC_CRC_TABLE */
-/* ========================================================================
- * Tables for byte-wise and braided CRC-32 calculations, and a table of powers
- * of x for combining CRC-32s, all made by make_crc_table().
- */
-#include "crc32.h"
 #endif /* DYNAMIC_CRC_TABLE */
 
-/* ========================================================================
- * Routines used for CRC calculation. Some are also required for the table
- * generation above.
- */
-
-/*
-  Return a(x) multiplied by b(x) modulo p(x), where p(x) is the CRC polynomial,
-  reflected. For speed, this requires that a not be zero.
- */
-local z_crc_t multmodp(a, b)
-    z_crc_t a;
-    z_crc_t b;
-{
-    z_crc_t m, p;
-
-    m = (z_crc_t)1 << 31;
-    p = 0;
-    for (;;) {
-        if (a & m) {
-            p ^= b;
-            if ((a & (m - 1)) == 0)
-                break;
-        }
-        m >>= 1;
-        b = b & 1 ? (b >> 1) ^ POLY : b >> 1;
-    }
-    return p;
-}
-
-/*
-  Return x^(n * 2^k) modulo p(x). Requires that x2n_table[] has been
-  initialized.
- */
-local z_crc_t x2nmodp(n, k)
-    z_off64_t n;
-    unsigned k;
-{
-    z_crc_t p;
-
-    p = (z_crc_t)1 << 31;           /* x^0 == 1 */
-    while (n) {
-        if (n & 1)
-            p = multmodp(x2n_table[k & 31], p);
-        n >>= 1;
-        k++;
-    }
-    return p;
-}
-
 /* =========================================================================
  * This function can be used by asm versions of crc32(), and to force the
  * generation of the CRC tables in a threaded application.
  */
-const z_crc_t FAR * ZEXPORT get_crc_table()
-{
+const z_crc_t FAR * ZEXPORT get_crc_table(void) {
 #ifdef DYNAMIC_CRC_TABLE
     once(&made, make_crc_table);
 #endif /* DYNAMIC_CRC_TABLE */
@@ -619,11 +572,8 @@ const z_crc_t FAR * ZEXPORT get_crc_table()
 #define Z_BATCH_ZEROS 0xa10d3d0c    /* computed from Z_BATCH = 3990 */
 #define Z_BATCH_MIN 800             /* fewest words in a final batch */
 
-unsigned long ZEXPORT crc32_z(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    z_size_t len;
-{
+unsigned long ZEXPORT crc32_z(unsigned long crc, const unsigned char FAR *buf,
+                              z_size_t len) {
     z_crc_t val;
     z_word_t crc1, crc2;
     const z_word_t *word;
@@ -723,18 +673,14 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
   least-significant byte of the word as the first byte of data, without any pre
   or post conditioning. This is used to combine the CRCs of each braid.
  */
-local z_crc_t crc_word(data)
-    z_word_t data;
-{
+local z_crc_t crc_word(z_word_t data) {
     int k;
     for (k = 0; k < W; k++)
         data = (data >> 8) ^ crc_table[data & 0xff];
     return (z_crc_t)data;
 }
 
-local z_word_t crc_word_big(data)
-    z_word_t data;
-{
+local z_word_t crc_word_big(z_word_t data) {
     int k;
     for (k = 0; k < W; k++)
         data = (data << 8) ^
@@ -745,11 +691,8 @@ local z_word_t crc_word_big(data)
 #endif
 
 /* ========================================================================= */
-unsigned long ZEXPORT crc32_z(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    z_size_t len;
-{
+unsigned long ZEXPORT crc32_z(unsigned long crc, const unsigned char FAR *buf,
+                              z_size_t len) {
     /* Return initial CRC, if requested. */
     if (buf == Z_NULL) return 0;
 
@@ -781,8 +724,8 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
         words = (z_word_t const *)buf;
 
         /* Do endian check at execution time instead of compile time, since ARM
-           processors can change the endianess at execution time. If the
-           compiler knows what the endianess will be, it can optimize out the
+           processors can change the endianness at execution time. If the
+           compiler knows what the endianness will be, it can optimize out the
            check and the unused branch. */
         endian = 1;
         if (*(unsigned char *)&endian) {
@@ -1069,20 +1012,13 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
 #endif
 
 /* ========================================================================= */
-unsigned long ZEXPORT crc32(crc, buf, len)
-    unsigned long crc;
-    const unsigned char FAR *buf;
-    uInt len;
-{
+unsigned long ZEXPORT crc32(unsigned long crc, const unsigned char FAR *buf,
+                            uInt len) {
     return crc32_z(crc, buf, len);
 }
 
 /* ========================================================================= */
-uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off64_t len2;
-{
+uLong ZEXPORT crc32_combine64(uLong crc1, uLong crc2, z_off64_t len2) {
 #ifdef DYNAMIC_CRC_TABLE
     once(&made, make_crc_table);
 #endif /* DYNAMIC_CRC_TABLE */
@@ -1090,18 +1026,12 @@ uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
 }
 
 /* ========================================================================= */
-uLong ZEXPORT crc32_combine(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off_t len2;
-{
+uLong ZEXPORT crc32_combine(uLong crc1, uLong crc2, z_off_t len2) {
     return crc32_combine64(crc1, crc2, (z_off64_t)len2);
 }
 
 /* ========================================================================= */
-uLong ZEXPORT crc32_combine_gen64(len2)
-    z_off64_t len2;
-{
+uLong ZEXPORT crc32_combine_gen64(z_off64_t len2) {
 #ifdef DYNAMIC_CRC_TABLE
     once(&made, make_crc_table);
 #endif /* DYNAMIC_CRC_TABLE */
@@ -1109,17 +1039,11 @@ uLong ZEXPORT crc32_combine_gen64(len2)
 }
 
 /* ========================================================================= */
-uLong ZEXPORT crc32_combine_gen(len2)
-    z_off_t len2;
-{
+uLong ZEXPORT crc32_combine_gen(z_off_t len2) {
     return crc32_combine_gen64((z_off64_t)len2);
 }
 
 /* ========================================================================= */
-uLong ZEXPORT crc32_combine_op(crc1, crc2, op)
-    uLong crc1;
-    uLong crc2;
-    uLong op;
-{
+uLong ZEXPORT crc32_combine_op(uLong crc1, uLong crc2, uLong op) {
     return multmodp(op, crc1) ^ (crc2 & 0xffffffff);
 }
diff --git a/compat/zlib/deflate.c b/compat/zlib/deflate.c
index 4a689db..bd01175 100644
--- a/compat/zlib/deflate.c
+++ b/compat/zlib/deflate.c
@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2023 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.13 Copyright 1995-2022 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.3 Copyright 1995-2023 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -60,9 +60,6 @@ const char deflate_copyright[] =
   copyright string in the executable of your product.
  */
 
-/* ===========================================================================
- *  Function prototypes.
- */
 typedef enum {
     need_more,      /* block not completed, need more input or more output */
     block_done,     /* block flush performed */
@@ -70,29 +67,16 @@ typedef enum {
     finish_done     /* finish done, accept no more input or output */
 } block_state;
 
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+typedef block_state (*compress_func)(deflate_state *s, int flush);
 /* Compression function. Returns the block state after the call. */
 
-local int deflateStateCheck      OF((z_streamp strm));
-local void slide_hash     OF((deflate_state *s));
-local void fill_window    OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast   OF((deflate_state *s, int flush));
+local block_state deflate_stored(deflate_state *s, int flush);
+local block_state deflate_fast(deflate_state *s, int flush);
 #ifndef FASTEST
-local block_state deflate_slow   OF((deflate_state *s, int flush));
-#endif
-local block_state deflate_rle    OF((deflate_state *s, int flush));
-local block_state deflate_huff   OF((deflate_state *s, int flush));
-local void lm_init        OF((deflate_state *s));
-local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_streamp strm));
-local unsigned read_buf   OF((z_streamp strm, Bytef *buf, unsigned size));
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
-
-#ifdef ZLIB_DEBUG
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
+local block_state deflate_slow(deflate_state *s, int flush);
 #endif
+local block_state deflate_rle(deflate_state *s, int flush);
+local block_state deflate_huff(deflate_state *s, int flush);
 
 /* ===========================================================================
  * Local data
@@ -195,9 +179,12 @@ local const config configuration_table[10] = {
  * bit values at the expense of memory usage). We slide even when level == 0 to
  * keep the hash table consistent if we switch back to level > 0 later.
  */
-local void slide_hash(s)
-    deflate_state *s;
-{
+#if defined(__has_feature)
+#  if __has_feature(memory_sanitizer)
+     __attribute__((no_sanitize("memory")))
+#  endif
+#endif
+local void slide_hash(deflate_state *s) {
     unsigned n, m;
     Posf *p;
     uInt wsize = s->w_size;
@@ -221,30 +208,177 @@ local void slide_hash(s)
 #endif
 }
 
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read.  All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+local unsigned read_buf(z_streamp strm, Bytef *buf, unsigned size) {
+    unsigned len = strm->avail_in;
+
+    if (len > size) len = size;
+    if (len == 0) return 0;
+
+    strm->avail_in  -= len;
+
+    zmemcpy(buf, strm->next_in, len);
+    if (strm->state->wrap == 1) {
+        strm->adler = adler32(strm->adler, buf, len);
+    }
+#ifdef GZIP
+    else if (strm->state->wrap == 2) {
+        strm->adler = crc32(strm->adler, buf, len);
+    }
+#endif
+    strm->next_in  += len;
+    strm->total_in += len;
+
+    return len;
+}
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ *    At least one byte has been read, or avail_in == 0; reads are
+ *    performed for at least two bytes (required for the zip translate_eol
+ *    option -- not supported here).
+ */
+local void fill_window(deflate_state *s) {
+    unsigned n;
+    unsigned more;    /* Amount of free space at the end of the window. */
+    uInt wsize = s->w_size;
+
+    Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
+
+    do {
+        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+        /* Deal with !@#$% 64K limit: */
+        if (sizeof(int) <= 2) {
+            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+                more = wsize;
+
+            } else if (more == (unsigned)(-1)) {
+                /* Very unlikely, but possible on 16 bit machine if
+                 * strstart == 0 && lookahead == 1 (input done a byte at time)
+                 */
+                more--;
+            }
+        }
+
+        /* If the window is almost full and there is insufficient lookahead,
+         * move the upper half to the lower one to make room in the upper half.
+         */
+        if (s->strstart >= wsize + MAX_DIST(s)) {
+
+            zmemcpy(s->window, s->window + wsize, (unsigned)wsize - more);
+            s->match_start -= wsize;
+            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
+            s->block_start -= (long) wsize;
+            if (s->insert > s->strstart)
+                s->insert = s->strstart;
+            slide_hash(s);
+            more += wsize;
+        }
+        if (s->strm->avail_in == 0) break;
+
+        /* If there was no sliding:
+         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+         *    more == window_size - lookahead - strstart
+         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+         * => more >= window_size - 2*WSIZE + 2
+         * In the BIG_MEM or MMAP case (not yet supported),
+         *   window_size == input_size + MIN_LOOKAHEAD  &&
+         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+         * Otherwise, window_size == 2*WSIZE so more >= 2.
+         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+         */
+        Assert(more >= 2, "more < 2");
+
+        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+        s->lookahead += n;
+
+        /* Initialize the hash value now that we have some input: */
+        if (s->lookahead + s->insert >= MIN_MATCH) {
+            uInt str = s->strstart - s->insert;
+            s->ins_h = s->window[str];
+            UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
+#if MIN_MATCH != 3
+            Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+            while (s->insert) {
+                UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+                s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+                s->head[s->ins_h] = (Pos)str;
+                str++;
+                s->insert--;
+                if (s->lookahead + s->insert < MIN_MATCH)
+                    break;
+            }
+        }
+        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+         * but this is not important since only literal bytes will be emitted.
+         */
+
+    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+
+    /* If the WIN_INIT bytes after the end of the current data have never been
+     * written, then zero those bytes in order to avoid memory check reports of
+     * the use of uninitialized (or uninitialised as Julian writes) bytes by
+     * the longest match routines.  Update the high water mark for the next
+     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
+     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
+     */
+    if (s->high_water < s->window_size) {
+        ulg curr = s->strstart + (ulg)(s->lookahead);
+        ulg init;
+
+        if (s->high_water < curr) {
+            /* Previous high water mark below current data -- zero WIN_INIT
+             * bytes or up to end of window, whichever is less.
+             */
+            init = s->window_size - curr;
+            if (init > WIN_INIT)
+                init = WIN_INIT;
+            zmemzero(s->window + curr, (unsigned)init);
+            s->high_water = curr + init;
+        }
+        else if (s->high_water < (ulg)curr + WIN_INIT) {
+            /* High water mark at or above current data, but below current data
+             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
+             * to end of window, whichever is less.
+             */
+            init = (ulg)curr + WIN_INIT - s->high_water;
+            if (init > s->window_size - s->high_water)
+                init = s->window_size - s->high_water;
+            zmemzero(s->window + s->high_water, (unsigned)init);
+            s->high_water += init;
+        }
+    }
+
+    Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
+           "not enough room for search");
+}
+
 /* ========================================================================= */
-int ZEXPORT deflateInit_(strm, level, version, stream_size)
-    z_streamp strm;
-    int level;
-    const char *version;
-    int stream_size;
-{
+int ZEXPORT deflateInit_(z_streamp strm, int level, const char *version,
+                         int stream_size) {
     return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
                          Z_DEFAULT_STRATEGY, version, stream_size);
     /* To do: ignore strm->next_in if we use it as window */
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
-                  version, stream_size)
-    z_streamp strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    const char *version;
-    int stream_size;
-{
+int ZEXPORT deflateInit2_(z_streamp strm, int level, int method,
+                          int windowBits, int memLevel, int strategy,
+                          const char *version, int stream_size) {
     deflate_state *s;
     int wrap = 1;
     static const char my_version[] = ZLIB_VERSION;
@@ -386,9 +520,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 /* =========================================================================
  * Check for a valid deflate stream state. Return 0 if ok, 1 if not.
  */
-local int deflateStateCheck(strm)
-    z_streamp strm;
-{
+local int deflateStateCheck(z_streamp strm) {
     deflate_state *s;
     if (strm == Z_NULL ||
         strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
@@ -409,11 +541,8 @@ local int deflateStateCheck(strm)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateSetDictionary(strm, dictionary, dictLength)
-    z_streamp strm;
-    const Bytef *dictionary;
-    uInt  dictLength;
-{
+int ZEXPORT deflateSetDictionary(z_streamp strm, const Bytef *dictionary,
+                                 uInt  dictLength) {
     deflate_state *s;
     uInt str, n;
     int wrap;
@@ -478,11 +607,8 @@ int ZEXPORT deflateSetDictionary(strm, dictionary, dictLength)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateGetDictionary(strm, dictionary, dictLength)
-    z_streamp strm;
-    Bytef *dictionary;
-    uInt  *dictLength;
-{
+int ZEXPORT deflateGetDictionary(z_streamp strm, Bytef *dictionary,
+                                 uInt *dictLength) {
     deflate_state *s;
     uInt len;
 
@@ -500,9 +626,7 @@ int ZEXPORT deflateGetDictionary(strm, dictionary, dictLength)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateResetKeep(strm)
-    z_streamp strm;
-{
+int ZEXPORT deflateResetKeep(z_streamp strm) {
     deflate_state *s;
 
     if (deflateStateCheck(strm)) {
@@ -537,10 +661,32 @@ int ZEXPORT deflateResetKeep(strm)
     return Z_OK;
 }
 
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+local void lm_init(deflate_state *s) {
+    s->window_size = (ulg)2L*s->w_size;
+
+    CLEAR_HASH(s);
+
+    /* Set the default configuration parameters:
+     */
+    s->max_lazy_match   = configuration_table[s->level].max_lazy;
+    s->good_match       = configuration_table[s->level].good_length;
+    s->nice_match       = configuration_table[s->level].nice_length;
+    s->max_chain_length = configuration_table[s->level].max_chain;
+
+    s->strstart = 0;
+    s->block_start = 0L;
+    s->lookahead = 0;
+    s->insert = 0;
+    s->match_length = s->prev_length = MIN_MATCH-1;
+    s->match_available = 0;
+    s->ins_h = 0;
+}
+
 /* ========================================================================= */
-int ZEXPORT deflateReset(strm)
-    z_streamp strm;
-{
+int ZEXPORT deflateReset(z_streamp strm) {
     int ret;
 
     ret = deflateResetKeep(strm);
@@ -550,10 +696,7 @@ int ZEXPORT deflateReset(strm)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateSetHeader(strm, head)
-    z_streamp strm;
-    gz_headerp head;
-{
+int ZEXPORT deflateSetHeader(z_streamp strm, gz_headerp head) {
     if (deflateStateCheck(strm) || strm->state->wrap != 2)
         return Z_STREAM_ERROR;
     strm->state->gzhead = head;
@@ -561,11 +704,7 @@ int ZEXPORT deflateSetHeader(strm, head)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflatePending(strm, pending, bits)
-    unsigned *pending;
-    int *bits;
-    z_streamp strm;
-{
+int ZEXPORT deflatePending(z_streamp strm, unsigned *pending, int *bits) {
     if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     if (pending != Z_NULL)
         *pending = strm->state->pending;
@@ -575,11 +714,7 @@ int ZEXPORT deflatePending(strm, pending, bits)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflatePrime(strm, bits, value)
-    z_streamp strm;
-    int bits;
-    int value;
-{
+int ZEXPORT deflatePrime(z_streamp strm, int bits, int value) {
     deflate_state *s;
     int put;
 
@@ -602,11 +737,7 @@ int ZEXPORT deflatePrime(strm, bits, value)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateParams(strm, level, strategy)
-    z_streamp strm;
-    int level;
-    int strategy;
-{
+int ZEXPORT deflateParams(z_streamp strm, int level, int strategy) {
     deflate_state *s;
     compress_func func;
 
@@ -651,13 +782,8 @@ int ZEXPORT deflateParams(strm, level, strategy)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
-    z_streamp strm;
-    int good_length;
-    int max_lazy;
-    int nice_length;
-    int max_chain;
-{
+int ZEXPORT deflateTune(z_streamp strm, int good_length, int max_lazy,
+                        int nice_length, int max_chain) {
     deflate_state *s;
 
     if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -693,10 +819,7 @@ int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
  *
  * Shifts are used to approximate divisions, for speed.
  */
-uLong ZEXPORT deflateBound(strm, sourceLen)
-    z_streamp strm;
-    uLong sourceLen;
-{
+uLong ZEXPORT deflateBound(z_streamp strm, uLong sourceLen) {
     deflate_state *s;
     uLong fixedlen, storelen, wraplen;
 
@@ -752,7 +875,8 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
 
     /* if not default parameters, return one of the conservative bounds */
     if (s->w_bits != 15 || s->hash_bits != 8 + 7)
-        return (s->w_bits <= s->hash_bits ? fixedlen : storelen) + wraplen;
+        return (s->w_bits <= s->hash_bits && s->level ? fixedlen : storelen) +
+               wraplen;
 
     /* default settings: return tight bound for that case -- ~0.03% overhead
        plus a small constant */
@@ -765,10 +889,7 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
  * IN assertion: the stream state is correct and there is enough room in
  * pending_buf.
  */
-local void putShortMSB(s, b)
-    deflate_state *s;
-    uInt b;
-{
+local void putShortMSB(deflate_state *s, uInt b) {
     put_byte(s, (Byte)(b >> 8));
     put_byte(s, (Byte)(b & 0xff));
 }
@@ -779,9 +900,7 @@ local void putShortMSB(s, b)
  * applications may wish to modify it to avoid allocating a large
  * strm->next_out buffer and copying into it. (See also read_buf()).
  */
-local void flush_pending(strm)
-    z_streamp strm;
-{
+local void flush_pending(z_streamp strm) {
     unsigned len;
     deflate_state *s = strm->state;
 
@@ -812,10 +931,7 @@ local void flush_pending(strm)
     } while (0)
 
 /* ========================================================================= */
-int ZEXPORT deflate(strm, flush)
-    z_streamp strm;
-    int flush;
-{
+int ZEXPORT deflate(z_streamp strm, int flush) {
     int old_flush; /* value of flush param for previous deflate call */
     deflate_state *s;
 
@@ -1127,9 +1243,7 @@ int ZEXPORT deflate(strm, flush)
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateEnd(strm)
-    z_streamp strm;
-{
+int ZEXPORT deflateEnd(z_streamp strm) {
     int status;
 
     if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -1153,11 +1267,10 @@ int ZEXPORT deflateEnd(strm)
  * To simplify the source, this is not supported for 16-bit MSDOS (which
  * doesn't have enough memory anyway to duplicate compression states).
  */
-int ZEXPORT deflateCopy(dest, source)
-    z_streamp dest;
-    z_streamp source;
-{
+int ZEXPORT deflateCopy(z_streamp dest, z_streamp source) {
 #ifdef MAXSEG_64K
+    (void)dest;
+    (void)source;
     return Z_STREAM_ERROR;
 #else
     deflate_state *ds;
@@ -1205,66 +1318,6 @@ int ZEXPORT deflateCopy(dest, source)
 #endif /* MAXSEG_64K */
 }
 
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.  All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local unsigned read_buf(strm, buf, size)
-    z_streamp strm;
-    Bytef *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    zmemcpy(buf, strm->next_in, len);
-    if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, buf, len);
-    }
-#ifdef GZIP
-    else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, buf, len);
-    }
-#endif
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init(s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->insert = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-}
-
 #ifndef FASTEST
 /* ===========================================================================
  * Set match_start to the longest match starting at the given string and
@@ -1275,10 +1328,7 @@ local void lm_init(s)
  *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
  * OUT assertion: the match length is not greater than s->lookahead.
  */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
+local uInt longest_match(deflate_state *s, IPos cur_match) {
     unsigned chain_length = s->max_chain_length;/* max hash chain length */
     register Bytef *scan = s->window + s->strstart; /* current string */
     register Bytef *match;                      /* matched string */
@@ -1426,10 +1476,7 @@ local uInt longest_match(s, cur_match)
 /* ---------------------------------------------------------------------------
  * Optimized version for FASTEST only
  */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
+local uInt longest_match(deflate_state *s, IPos cur_match) {
     register Bytef *scan = s->window + s->strstart; /* current string */
     register Bytef *match;                       /* matched string */
     register int len;                           /* length of current match */
@@ -1490,11 +1537,7 @@ local uInt longest_match(s, cur_match)
 /* ===========================================================================
  * Check that the match at match_start is indeed a match.
  */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
+local void check_match(deflate_state *s, IPos start, IPos match, int length) {
     /* check that the match is indeed a match */
     if (zmemcmp(s->window + match,
                 s->window + start, length) != EQUAL) {
@@ -1515,137 +1558,6 @@ local void check_match(s, start, match, length)
 #endif /* ZLIB_DEBUG */
 
 /* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    unsigned n;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (sizeof(int) <= 2) {
-            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-                more = wsize;
-
-            } else if (more == (unsigned)(-1)) {
-                /* Very unlikely, but possible on 16 bit machine if
-                 * strstart == 0 && lookahead == 1 (input done a byte at time)
-                 */
-                more--;
-            }
-        }
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        if (s->strstart >= wsize + MAX_DIST(s)) {
-
-            zmemcpy(s->window, s->window + wsize, (unsigned)wsize - more);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-            s->block_start -= (long) wsize;
-            if (s->insert > s->strstart)
-                s->insert = s->strstart;
-            slide_hash(s);
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) break;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead + s->insert >= MIN_MATCH) {
-            uInt str = s->strstart - s->insert;
-            s->ins_h = s->window[str];
-            UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-            while (s->insert) {
-                UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
-#ifndef FASTEST
-                s->prev[str & s->w_mask] = s->head[s->ins_h];
-#endif
-                s->head[s->ins_h] = (Pos)str;
-                str++;
-                s->insert--;
-                if (s->lookahead + s->insert < MIN_MATCH)
-                    break;
-            }
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-
-    /* If the WIN_INIT bytes after the end of the current data have never been
-     * written, then zero those bytes in order to avoid memory check reports of
-     * the use of uninitialized (or uninitialised as Julian writes) bytes by
-     * the longest match routines.  Update the high water mark for the next
-     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
-     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
-     */
-    if (s->high_water < s->window_size) {
-        ulg curr = s->strstart + (ulg)(s->lookahead);
-        ulg init;
-
-        if (s->high_water < curr) {
-            /* Previous high water mark below current data -- zero WIN_INIT
-             * bytes or up to end of window, whichever is less.
-             */
-            init = s->window_size - curr;
-            if (init > WIN_INIT)
-                init = WIN_INIT;
-            zmemzero(s->window + curr, (unsigned)init);
-            s->high_water = curr + init;
-        }
-        else if (s->high_water < (ulg)curr + WIN_INIT) {
-            /* High water mark at or above current data, but below current data
-             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
-             * to end of window, whichever is less.
-             */
-            init = (ulg)curr + WIN_INIT - s->high_water;
-            if (init > s->window_size - s->high_water)
-                init = s->window_size - s->high_water;
-            zmemzero(s->window + s->high_water, (unsigned)init);
-            s->high_water += init;
-        }
-    }
-
-    Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
-           "not enough room for search");
-}
-
-/* ===========================================================================
  * Flush the current block, with given end-of-file flag.
  * IN assertion: strstart is set to the end of the current match.
  */
@@ -1687,10 +1599,7 @@ local void fill_window(s)
  * copied. It is most efficient with large input and output buffers, which
  * maximizes the opportunities to have a single copy from next_in to next_out.
  */
-local block_state deflate_stored(s, flush)
-    deflate_state *s;
-    int flush;
-{
+local block_state deflate_stored(deflate_state *s, int flush) {
     /* Smallest worthy block size when not flushing or finishing. By default
      * this is 32K. This can be as small as 507 bytes for memLevel == 1. For
      * large input and output buffers, the stored block size will be larger.
@@ -1874,10 +1783,7 @@ local block_state deflate_stored(s, flush)
  * new strings in the dictionary only for unmatched strings or for short
  * matches. It is used only for the fast compression options.
  */
-local block_state deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
+local block_state deflate_fast(deflate_state *s, int flush) {
     IPos hash_head;       /* head of the hash chain */
     int bflush;           /* set if current block must be flushed */
 
@@ -1976,10 +1882,7 @@ local block_state deflate_fast(s, flush)
  * evaluation for matches: a match is finally adopted only if there is
  * no better match at the next window position.
  */
-local block_state deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
+local block_state deflate_slow(deflate_state *s, int flush) {
     IPos hash_head;          /* head of hash chain */
     int bflush;              /* set if current block must be flushed */
 
@@ -2107,10 +2010,7 @@ local block_state deflate_slow(s, flush)
  * one.  Do not maintain a hash table.  (It will be regenerated if this run of
  * deflate switches away from Z_RLE.)
  */
-local block_state deflate_rle(s, flush)
-    deflate_state *s;
-    int flush;
-{
+local block_state deflate_rle(deflate_state *s, int flush) {
     int bflush;             /* set if current block must be flushed */
     uInt prev;              /* byte at distance one to match */
     Bytef *scan, *strend;   /* scan goes up to strend for length of run */
@@ -2181,10 +2081,7 @@ local block_state deflate_rle(s, flush)
  * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
  * (It will be regenerated if this run of deflate switches away from Huffman.)
  */
-local block_state deflate_huff(s, flush)
-    deflate_state *s;
-    int flush;
-{
+local block_state deflate_huff(deflate_state *s, int flush) {
     int bflush;             /* set if current block must be flushed */
 
     for (;;) {
diff --git a/compat/zlib/deflate.h b/compat/zlib/deflate.h
index 1a06cd5..8696791 100644
--- a/compat/zlib/deflate.h
+++ b/compat/zlib/deflate.h
@@ -291,14 +291,14 @@ typedef struct internal_state {
    memory checker errors from longest match routines */
 
         /* in trees.c */
-void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
-int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_init(deflate_state *s);
+int ZLIB_INTERNAL _tr_tally(deflate_state *s, unsigned dist, unsigned lc);
+void ZLIB_INTERNAL _tr_flush_block(deflate_state *s, charf *buf,
+                                   ulg stored_len, int last);
+void ZLIB_INTERNAL _tr_flush_bits(deflate_state *s);
+void ZLIB_INTERNAL _tr_align(deflate_state *s);
+void ZLIB_INTERNAL _tr_stored_block(deflate_state *s, charf *buf,
+                                    ulg stored_len, int last);
 
 #define d_code(dist) \
    ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
diff --git a/compat/zlib/examples/fitblk.c b/compat/zlib/examples/fitblk.c
index 68f5680..723dc00 100644
--- a/compat/zlib/examples/fitblk.c
+++ b/compat/zlib/examples/fitblk.c
@@ -198,7 +198,7 @@ int main(int argc, char **argv)
     if (ret == Z_MEM_ERROR)
         quit("out of memory");
 
-    /* set up for next reocmpression */
+    /* set up for next recompression */
     ret = inflateReset(&inf);
     assert(ret != Z_STREAM_ERROR);
     ret = deflateReset(&def);
diff --git a/compat/zlib/examples/zlib_how.html b/compat/zlib/examples/zlib_how.html
index 444ff1c..43271b9 100644
--- a/compat/zlib/examples/zlib_how.html
+++ b/compat/zlib/examples/zlib_how.html
@@ -1,10 +1,10 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
-  "http://www.w3.org/TR/REC-html40/loose.dtd">
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
+  "http://www.w3.org/TR/html4/loose.dtd">
 <html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>zlib Usage Example</title>
-<!--  Copyright (c) 2004, 2005 Mark Adler.  -->
+<!--  Copyright (c) 2004-2023 Mark Adler.  -->
 </head>
 <body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#00A000">
 <h2 align="center"> zlib Usage Example </h2>
@@ -17,7 +17,7 @@ from an input file to an output file using <tt>deflate()</tt> and <tt>inflate()<
 annotations are interspersed between lines of the code.  So please read between the lines.
 We hope this helps explain some of the intricacies of <em>zlib</em>.
 <p>
-Without further adieu, here is the program <a href="zpipe.c"><tt>zpipe.c</tt></a>:
+Without further ado, here is the program <a href="zpipe.c"><tt>zpipe.c</tt></a>:
 <pre><b>
 /* zpipe.c: example of proper use of zlib's inflate() and deflate()
    Not copyrighted -- provided to the public domain
@@ -155,13 +155,11 @@ before we fall out of the loop at the bottom.
 </b></pre>
 We start off by reading data from the input file.  The number of bytes read is put directly
 into <tt>avail_in</tt>, and a pointer to those bytes is put into <tt>next_in</tt>.  We also
-check to see if end-of-file on the input has been reached.  If we are at the end of file, then <tt>flush</tt> is set to the
+check to see if end-of-file on the input has been reached using feof().
+If we are at the end of file, then <tt>flush</tt> is set to the
 <em>zlib</em> constant <tt>Z_FINISH</tt>, which is later passed to <tt>deflate()</tt> to
-indicate that this is the last chunk of input data to compress.  We need to use <tt>feof()</tt>
-to check for end-of-file as opposed to seeing if fewer than <tt>CHUNK</tt> bytes have been read.  The
-reason is that if the input file length is an exact multiple of <tt>CHUNK</tt>, we will miss
-the fact that we got to the end-of-file, and not know to tell <tt>deflate()</tt> to finish
-up the compressed stream.  If we are not yet at the end of the input, then the <em>zlib</em>
+indicate that this is the last chunk of input data to compress.
+If we are not yet at the end of the input, then the <em>zlib</em>
 constant <tt>Z_NO_FLUSH</tt> will be passed to <tt>deflate</tt> to indicate that we are still
 in the middle of the uncompressed data.
 <p>
@@ -540,6 +538,12 @@ int main(int argc, char **argv)
 }
 </b></pre>
 <hr>
-<i>Copyright (c) 2004, 2005 by Mark Adler<br>Last modified 11 December 2005</i>
+<i>Last modified 24 January 2023<br>
+Copyright &#169; 2004-2023 Mark Adler</i><br>
+<a rel="license" href="http://creativecommons.org/licenses/by-nd/4.0/">
+<img alt="Creative Commons License" style="border-width:0"
+src="https://i.creativecommons.org/l/by-nd/4.0/88x31.png"></a>
+<a rel="license" href="http://creativecommons.org/licenses/by-nd/4.0/">
+Creative Commons Attribution-NoDerivatives 4.0 International License</a>.
 </body>
 </html>
diff --git a/compat/zlib/examples/zran.c b/compat/zlib/examples/zran.c
index 879c47c..32c9368 100644
--- a/compat/zlib/examples/zran.c
+++ b/compat/zlib/examples/zran.c
@@ -1,114 +1,102 @@
-/* zran.c -- example of zlib/gzip stream indexing and random access
- * Copyright (C) 2005, 2012, 2018 Mark Adler
+/* zran.c -- example of deflate stream indexing and random access
+ * Copyright (C) 2005, 2012, 2018, 2023 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
- * Version 1.2  14 Oct 2018  Mark Adler */
+ * Version 1.4  13 Apr 2023  Mark Adler */
 
 /* Version History:
  1.0  29 May 2005  First version
  1.1  29 Sep 2012  Fix memory reallocation error
  1.2  14 Oct 2018  Handle gzip streams with multiple members
                    Add a header file to facilitate usage in applications
+ 1.3  18 Feb 2023  Permit raw deflate streams as well as zlib and gzip
+                   Permit crossing gzip member boundaries when extracting
+                   Support a size_t size when extracting (was an int)
+                   Do a binary search over the index for an access point
+                   Expose the access point type to enable save and load
+ 1.4  13 Apr 2023  Add a NOPRIME define to not use inflatePrime()
  */
 
-/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
-   for random access of a compressed file.  A file containing a zlib or gzip
-   stream is provided on the command line.  The compressed stream is decoded in
-   its entirety, and an index built with access points about every SPAN bytes
-   in the uncompressed output.  The compressed file is left open, and can then
-   be read randomly, having to decompress on the average SPAN/2 uncompressed
-   bytes before getting to the desired block of data.
-
-   An access point can be created at the start of any deflate block, by saving
-   the starting file offset and bit of that block, and the 32K bytes of
-   uncompressed data that precede that block.  Also the uncompressed offset of
-   that block is saved to provide a reference for locating a desired starting
-   point in the uncompressed stream.  deflate_index_build() works by
-   decompressing the input zlib or gzip stream a block at a time, and at the
-   end of each block deciding if enough uncompressed data has gone by to
-   justify the creation of a new access point.  If so, that point is saved in a
-   data structure that grows as needed to accommodate the points.
-
-   To use the index, an offset in the uncompressed data is provided, for which
-   the latest access point at or preceding that offset is located in the index.
-   The input file is positioned to the specified location in the index, and if
-   necessary the first few bits of the compressed data is read from the file.
-   inflate is initialized with those bits and the 32K of uncompressed data, and
-   the decompression then proceeds until the desired offset in the file is
-   reached.  Then the decompression continues to read the desired uncompressed
-   data from the file.
-
-   Another approach would be to generate the index on demand.  In that case,
-   requests for random access reads from the compressed data would try to use
-   the index, but if a read far enough past the end of the index is required,
-   then further index entries would be generated and added.
-
-   There is some fair bit of overhead to starting inflation for the random
-   access, mainly copying the 32K byte dictionary.  So if small pieces of the
-   file are being accessed, it would make sense to implement a cache to hold
-   some lookahead and avoid many calls to deflate_index_extract() for small
-   lengths.
-
-   Another way to build an index would be to use inflateCopy().  That would
-   not be constrained to have access points at block boundaries, but requires
-   more memory per access point, and also cannot be saved to file due to the
-   use of pointers in the state.  The approach here allows for storage of the
-   index in a file.
- */
+// Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
+// for random access of a compressed file. A file containing a raw deflate
+// stream is provided on the command line. The compressed stream is decoded in
+// its entirety, and an index built with access points about every SPAN bytes
+// in the uncompressed output. The compressed file is left open, and can then
+// be read randomly, having to decompress on the average SPAN/2 uncompressed
+// bytes before getting to the desired block of data.
+//
+// An access point can be created at the start of any deflate block, by saving
+// the starting file offset and bit of that block, and the 32K bytes of
+// uncompressed data that precede that block. Also the uncompressed offset of
+// that block is saved to provide a reference for locating a desired starting
+// point in the uncompressed stream. deflate_index_build() decompresses the
+// input raw deflate stream a block at a time, and at the end of each block
+// decides if enough uncompressed data has gone by to justify the creation of a
+// new access point. If so, that point is saved in a data structure that grows
+// as needed to accommodate the points.
+//
+// To use the index, an offset in the uncompressed data is provided, for which
+// the latest access point at or preceding that offset is located in the index.
+// The input file is positioned to the specified location in the index, and if
+// necessary the first few bits of the compressed data is read from the file.
+// inflate is initialized with those bits and the 32K of uncompressed data, and
+// decompression then proceeds until the desired offset in the file is reached.
+// Then decompression continues to read the requested uncompressed data from
+// the file.
+//
+// There is some fair bit of overhead to starting inflation for the random
+// access, mainly copying the 32K byte dictionary. If small pieces of the file
+// are being accessed, it would make sense to implement a cache to hold some
+// lookahead to avoid many calls to deflate_index_extract() for small lengths.
+//
+// Another way to build an index would be to use inflateCopy(). That would not
+// be constrained to have access points at block boundaries, but would require
+// more memory per access point, and could not be saved to a file due to the
+// use of pointers in the state. The approach here allows for storage of the
+// index in a file.
 
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include <limits.h>
 #include "zlib.h"
 #include "zran.h"
 
-#define WINSIZE 32768U      /* sliding window size */
-#define CHUNK 16384         /* file input buffer size */
-
-/* Access point entry. */
-struct point {
-    off_t out;          /* corresponding offset in uncompressed data */
-    off_t in;           /* offset in input file of first full byte */
-    int bits;           /* number of bits (1-7) from byte at in-1, or 0 */
-    unsigned char window[WINSIZE];  /* preceding 32K of uncompressed data */
-};
+#define WINSIZE 32768U      // sliding window size
+#define CHUNK 16384         // file input buffer size
 
-/* See comments in zran.h. */
-void deflate_index_free(struct deflate_index *index)
-{
+// See comments in zran.h.
+void deflate_index_free(struct deflate_index *index) {
     if (index != NULL) {
         free(index->list);
         free(index);
     }
 }
 
-/* Add an entry to the access point list. If out of memory, deallocate the
-   existing list and return NULL. index->gzip is the allocated size of the
-   index in point entries, until it is time for deflate_index_build() to
-   return, at which point gzip is set to indicate a gzip file or not.
- */
-static struct deflate_index *addpoint(struct deflate_index *index, int bits,
-                                      off_t in, off_t out, unsigned left,
-                                      unsigned char *window)
-{
-    struct point *next;
-
-    /* if list is empty, create it (start with eight points) */
+// Add an access point to the list. If out of memory, deallocate the existing
+// list and return NULL. index->mode is temporarily the allocated number of
+// access points, until it is time for deflate_index_build() to return. Then
+// index->mode is set to the mode of inflation.
+static struct deflate_index *add_point(struct deflate_index *index, int bits,
+                                       off_t in, off_t out, unsigned left,
+                                       unsigned char *window) {
     if (index == NULL) {
+        // The list is empty. Create it, starting with eight access points.
         index = malloc(sizeof(struct deflate_index));
-        if (index == NULL) return NULL;
-        index->list = malloc(sizeof(struct point) << 3);
+        if (index == NULL)
+            return NULL;
+        index->have = 0;
+        index->mode = 8;
+        index->list = malloc(sizeof(point_t) * index->mode);
         if (index->list == NULL) {
             free(index);
             return NULL;
         }
-        index->gzip = 8;
-        index->have = 0;
     }
 
-    /* if list is full, make it bigger */
-    else if (index->have == index->gzip) {
-        index->gzip <<= 1;
-        next = realloc(index->list, sizeof(struct point) * index->gzip);
+    else if (index->have == index->mode) {
+        // The list is full. Make it bigger.
+        index->mode <<= 1;
+        point_t *next = realloc(index->list, sizeof(point_t) * index->mode);
         if (next == NULL) {
             deflate_index_free(index);
             return NULL;
@@ -116,318 +104,379 @@ static struct deflate_index *addpoint(struct deflate_index *index, int bits,
         index->list = next;
     }
 
-    /* fill in entry and increment how many we have */
-    next = (struct point *)(index->list) + index->have;
-    next->bits = bits;
-    next->in = in;
+    // Fill in the access point and increment how many we have.
+    point_t *next = (point_t *)(index->list) + index->have++;
+    if (index->have < 0) {
+        // Overflowed the int!
+        deflate_index_free(index);
+        return NULL;
+    }
     next->out = out;
+    next->in = in;
+    next->bits = bits;
     if (left)
         memcpy(next->window, window + WINSIZE - left, left);
     if (left < WINSIZE)
         memcpy(next->window + left, window, WINSIZE - left);
-    index->have++;
 
-    /* return list, possibly reallocated */
+    // Return the index, which may have been newly allocated or destroyed.
     return index;
 }
 
-/* See comments in zran.h. */
-int deflate_index_build(FILE *in, off_t span, struct deflate_index **built)
-{
-    int ret;
-    int gzip = 0;               /* true if reading a gzip file */
-    off_t totin, totout;        /* our own total counters to avoid 4GB limit */
-    off_t last;                 /* totout value of last access point */
-    struct deflate_index *index;    /* access points being generated */
-    z_stream strm;
-    unsigned char input[CHUNK];
-    unsigned char window[WINSIZE];
-
-    /* initialize inflate */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    ret = inflateInit2(&strm, 47);      /* automatic zlib or gzip decoding */
-    if (ret != Z_OK)
-        return ret;
-
-    /* inflate the input, maintain a sliding window, and build an index -- this
-       also validates the integrity of the compressed data using the check
-       information in the gzip or zlib stream */
-    totin = totout = last = 0;
-    index = NULL;               /* will be allocated by first addpoint() */
-    strm.avail_out = 0;
+// Decompression modes. These are the inflateInit2() windowBits parameter.
+#define RAW -15
+#define ZLIB 15
+#define GZIP 31
+
+// See comments in zran.h.
+int deflate_index_build(FILE *in, off_t span, struct deflate_index **built) {
+    // Set up inflation state.
+    z_stream strm = {0};        // inflate engine (gets fired up later)
+    unsigned char buf[CHUNK];   // input buffer
+    unsigned char win[WINSIZE] = {0};   // output sliding window
+    off_t totin = 0;            // total bytes read from input
+    off_t totout = 0;           // total bytes uncompressed
+    int mode = 0;               // mode: RAW, ZLIB, or GZIP (0 => not set yet)
+
+    // Decompress from in, generating access points along the way.
+    int ret;                    // the return value from zlib, or Z_ERRNO
+    off_t last;                 // last access point uncompressed offset
+    struct deflate_index *index = NULL;     // list of access points
     do {
-        /* get some compressed data from input file */
-        strm.avail_in = fread(input, 1, CHUNK, in);
-        if (ferror(in)) {
-            ret = Z_ERRNO;
-            goto deflate_index_build_error;
-        }
+        // Assure available input, at least until reaching EOF.
         if (strm.avail_in == 0) {
-            ret = Z_DATA_ERROR;
-            goto deflate_index_build_error;
-        }
-        strm.next_in = input;
-
-        /* check for a gzip stream */
-        if (totin == 0 && strm.avail_in >= 3 &&
-            input[0] == 31 && input[1] == 139 && input[2] == 8)
-            gzip = 1;
-
-        /* process all of that, or until end of stream */
-        do {
-            /* reset sliding window if necessary */
-            if (strm.avail_out == 0) {
-                strm.avail_out = WINSIZE;
-                strm.next_out = window;
-            }
-
-            /* inflate until out of input, output, or at end of block --
-               update the total input and output counters */
+            strm.avail_in = fread(buf, 1, sizeof(buf), in);
             totin += strm.avail_in;
-            totout += strm.avail_out;
-            ret = inflate(&strm, Z_BLOCK);      /* return at end of block */
-            totin -= strm.avail_in;
-            totout -= strm.avail_out;
-            if (ret == Z_NEED_DICT)
-                ret = Z_DATA_ERROR;
-            if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
-                goto deflate_index_build_error;
-            if (ret == Z_STREAM_END) {
-                if (gzip &&
-                    (strm.avail_in || ungetc(getc(in), in) != EOF)) {
-                    ret = inflateReset(&strm);
-                    if (ret != Z_OK)
-                        goto deflate_index_build_error;
-                    continue;
-                }
+            strm.next_in = buf;
+            if (strm.avail_in < sizeof(buf) && ferror(in)) {
+                ret = Z_ERRNO;
                 break;
             }
 
-            /* if at end of block, consider adding an index entry (note that if
-               data_type indicates an end-of-block, then all of the
-               uncompressed data from that block has been delivered, and none
-               of the compressed data after that block has been consumed,
-               except for up to seven bits) -- the totout == 0 provides an
-               entry point after the zlib or gzip header, and assures that the
-               index always has at least one access point; we avoid creating an
-               access point after the last block by checking bit 6 of data_type
-             */
-            if ((strm.data_type & 128) && !(strm.data_type & 64) &&
-                (totout == 0 || totout - last > span)) {
-                index = addpoint(index, strm.data_type & 7, totin,
-                                 totout, strm.avail_out, window);
-                if (index == NULL) {
-                    ret = Z_MEM_ERROR;
-                    goto deflate_index_build_error;
-                }
-                last = totout;
+            if (mode == 0) {
+                // At the start of the input -- determine the type. Assume raw
+                // if it is neither zlib nor gzip. This could in theory result
+                // in a false positive for zlib, but in practice the fill bits
+                // after a stored block are always zeros, so a raw stream won't
+                // start with an 8 in the low nybble.
+                mode = strm.avail_in == 0 ? RAW :       // empty -- will fail
+                       (strm.next_in[0] & 0xf) == 8 ? ZLIB :
+                       strm.next_in[0] == 0x1f ? GZIP :
+                       /* else */ RAW;
+                ret = inflateInit2(&strm, mode);
+                if (ret != Z_OK)
+                    break;
             }
-        } while (strm.avail_in != 0);
-    } while (ret != Z_STREAM_END);
+        }
+
+        // Assure available output. This rotates the output through, for use as
+        // a sliding window on the uncompressed data.
+        if (strm.avail_out == 0) {
+            strm.avail_out = sizeof(win);
+            strm.next_out = win;
+        }
 
-    /* clean up and return index (release unused entries in list) */
-    (void)inflateEnd(&strm);
-    index->list = realloc(index->list, sizeof(struct point) * index->have);
-    index->gzip = gzip;
+        if (mode == RAW && index == NULL)
+            // We skip the inflate() call at the start of raw deflate data in
+            // order generate an access point there. Set data_type to imitate
+            // the end of a header.
+            strm.data_type = 0x80;
+        else {
+            // Inflate and update the number of uncompressed bytes.
+            unsigned before = strm.avail_out;
+            ret = inflate(&strm, Z_BLOCK);
+            totout += before - strm.avail_out;
+        }
+
+        if ((strm.data_type & 0xc0) == 0x80 &&
+            (index == NULL || totout - last >= span)) {
+            // We are at the end of a header or a non-last deflate block, so we
+            // can add an access point here. Furthermore, we are either at the
+            // very start for the first access point, or there has been span or
+            // more uncompressed bytes since the last access point, so we want
+            // to add an access point here.
+            index = add_point(index, strm.data_type & 7, totin - strm.avail_in,
+                              totout, strm.avail_out, win);
+            if (index == NULL) {
+                ret = Z_MEM_ERROR;
+                break;
+            }
+            last = totout;
+        }
+
+        if (ret == Z_STREAM_END && mode == GZIP &&
+            (strm.avail_in || ungetc(getc(in), in) != EOF))
+            // There is more input after the end of a gzip member. Reset the
+            // inflate state to read another gzip member. On success, this will
+            // set ret to Z_OK to continue decompressing.
+            ret = inflateReset2(&strm, GZIP);
+
+        // Keep going until Z_STREAM_END or error. If the compressed data ends
+        // prematurely without a file read error, Z_BUF_ERROR is returned.
+    } while (ret == Z_OK);
+    inflateEnd(&strm);
+
+    if (ret != Z_STREAM_END) {
+        // An error was encountered. Discard the index and return a negative
+        // error code.
+        deflate_index_free(index);
+        return ret == Z_NEED_DICT ? Z_DATA_ERROR : ret;
+    }
+
+    // Shrink the index to only the occupied access points and return it.
+    index->mode = mode;
     index->length = totout;
+    point_t *list = realloc(index->list, sizeof(point_t) * index->have);
+    if (list == NULL) {
+        // Seems like a realloc() to make something smaller should always work,
+        // but just in case.
+        deflate_index_free(index);
+        return Z_MEM_ERROR;
+    }
+    index->list = list;
     *built = index;
     return index->have;
+}
 
-    /* return error */
-  deflate_index_build_error:
-    (void)inflateEnd(&strm);
-    deflate_index_free(index);
-    return ret;
+#ifdef NOPRIME
+// Support zlib versions before 1.2.3 (July 2005), or incomplete zlib clones
+// that do not have inflatePrime().
+
+#  define INFLATEPRIME inflatePreface
+
+// Append the low bits bits of value to in[] at bit position *have, updating
+// *have. value must be zero above its low bits bits. bits must be positive.
+// This assumes that any bits above the *have bits in the last byte are zeros.
+// That assumption is preserved on return, as any bits above *have + bits in
+// the last byte written will be set to zeros.
+static inline void append_bits(unsigned value, int bits,
+                               unsigned char *in, int *have) {
+    in += *have >> 3;           // where the first bits from value will go
+    int k = *have & 7;          // the number of bits already there
+    *have += bits;
+    if (k)
+        *in |= value << k;      // write value above the low k bits
+    else
+        *in = value;
+    k = 8 - k;                  // the number of bits just appended
+    while (bits > k) {
+        value >>= k;            // drop the bits appended
+        bits -= k;
+        k = 8;                  // now at a byte boundary
+        *++in = value;
+    }
 }
 
-/* See comments in zran.h. */
-int deflate_index_extract(FILE *in, struct deflate_index *index, off_t offset,
-                          unsigned char *buf, int len)
-{
-    int ret, skip;
-    z_stream strm;
-    struct point *here;
-    unsigned char input[CHUNK];
-    unsigned char discard[WINSIZE];
+// Insert enough bits in the form of empty deflate blocks in front of the the
+// low bits bits of value, in order to bring the sequence to a byte boundary.
+// Then feed that to inflate(). This does what inflatePrime() does, except that
+// a negative value of bits is not supported. bits must be in 0..16. If the
+// arguments are invalid, Z_STREAM_ERROR is returned. Otherwise the return
+// value from inflate() is returned.
+static int inflatePreface(z_stream *strm, int bits, int value) {
+    // Check input.
+    if (strm == Z_NULL || bits < 0 || bits > 16)
+        return Z_STREAM_ERROR;
+    if (bits == 0)
+        return Z_OK;
+    value &= (2 << (bits - 1)) - 1;
+
+    // An empty dynamic block with an odd number of bits (95). The high bit of
+    // the last byte is unused.
+    static const unsigned char dyn[] = {
+        4, 0xe0, 0x81, 8, 0, 0, 0, 0, 0x20, 0xa8, 0xab, 0x1f
+    };
+    const int dynlen = 95;          // number of bits in the block
+
+    // Build an input buffer for inflate that is a multiple of eight bits in
+    // length, and that ends with the low bits bits of value.
+    unsigned char in[(dynlen + 3 * 10 + 16 + 7) / 8];
+    int have = 0;
+    if (bits & 1) {
+        // Insert an empty dynamic block to get to an odd number of bits, so
+        // when bits bits from value are appended, we are at an even number of
+        // bits.
+        memcpy(in, dyn, sizeof(dyn));
+        have = dynlen;
+    }
+    while ((have + bits) & 7)
+        // Insert empty fixed blocks until appending bits bits would put us on
+        // a byte boundary. This will insert at most three fixed blocks.
+        append_bits(2, 10, in, &have);
+
+    // Append the bits bits from value, which takes us to a byte boundary.
+    append_bits(value, bits, in, &have);
+
+    // Deliver the input to inflate(). There is no output space provided, but
+    // inflate() can't get stuck waiting on output not ingesting all of the
+    // provided input. The reason is that there will be at most 16 bits of
+    // input from value after the empty deflate blocks (which themselves
+    // generate no output). At least ten bits are needed to generate the first
+    // output byte from a fixed block. The last two bytes of the buffer have to
+    // be ingested in order to get ten bits, which is the most that value can
+    // occupy.
+    strm->avail_in = have >> 3;
+    strm->next_in = in;
+    strm->avail_out = 0;
+    strm->next_out = in;                // not used, but can't be NULL
+    return inflate(strm, Z_NO_FLUSH);
+}
+
+#else
+#  define INFLATEPRIME inflatePrime
+#endif
+
+// See comments in zran.h.
+ptrdiff_t deflate_index_extract(FILE *in, struct deflate_index *index,
+                                off_t offset, unsigned char *buf, size_t len) {
+    // Do a quick sanity check on the index.
+    if (index == NULL || index->have < 1 || index->list[0].out != 0)
+        return Z_STREAM_ERROR;
 
-    /* proceed only if something reasonable to do */
-    if (len < 0)
+    // If nothing to extract, return zero bytes extracted.
+    if (len == 0 || offset < 0 || offset >= index->length)
         return 0;
 
-    /* find where in stream to start */
-    here = index->list;
-    ret = index->have;
-    while (--ret && here[1].out <= offset)
-        here++;
-
-    /* initialize file and inflate state to start there */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    ret = inflateInit2(&strm, -15);         /* raw inflate */
+    // Find the access point closest to but not after offset.
+    int lo = -1, hi = index->have;
+    point_t *point = index->list;
+    while (hi - lo > 1) {
+        int mid = (lo + hi) >> 1;
+        if (offset < point[mid].out)
+            hi = mid;
+        else
+            lo = mid;
+    }
+    point += lo;
+
+    // Initialize the input file and prime the inflate engine to start there.
+    int ret = fseeko(in, point->in - (point->bits ? 1 : 0), SEEK_SET);
+    if (ret == -1)
+        return Z_ERRNO;
+    int ch = 0;
+    if (point->bits && (ch = getc(in)) == EOF)
+        return ferror(in) ? Z_ERRNO : Z_BUF_ERROR;
+    z_stream strm = {0};
+    ret = inflateInit2(&strm, RAW);
     if (ret != Z_OK)
         return ret;
-    ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET);
-    if (ret == -1)
-        goto deflate_index_extract_ret;
-    if (here->bits) {
-        ret = getc(in);
-        if (ret == -1) {
-            ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR;
-            goto deflate_index_extract_ret;
-        }
-        (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits));
-    }
-    (void)inflateSetDictionary(&strm, here->window, WINSIZE);
+    if (point->bits)
+        INFLATEPRIME(&strm, point->bits, ch >> (8 - point->bits));
+    inflateSetDictionary(&strm, point->window, WINSIZE);
 
-    /* skip uncompressed bytes until offset reached, then satisfy request */
-    offset -= here->out;
-    strm.avail_in = 0;
-    skip = 1;                               /* while skipping to offset */
+    // Skip uncompressed bytes until offset reached, then satisfy request.
+    unsigned char input[CHUNK];
+    unsigned char discard[WINSIZE];
+    offset -= point->out;       // number of bytes to skip to get to offset
+    size_t left = len;          // number of bytes left to read after offset
     do {
-        /* define where to put uncompressed data, and how much */
-        if (offset > WINSIZE) {             /* skip WINSIZE bytes */
-            strm.avail_out = WINSIZE;
-            strm.next_out = discard;
-            offset -= WINSIZE;
-        }
-        else if (offset > 0) {              /* last skip */
-            strm.avail_out = (unsigned)offset;
+        if (offset) {
+            // Discard up to offset uncompressed bytes.
+            strm.avail_out = offset < WINSIZE ? (unsigned)offset : WINSIZE;
             strm.next_out = discard;
-            offset = 0;
         }
-        else if (skip) {                    /* at offset now */
-            strm.avail_out = len;
-            strm.next_out = buf;
-            skip = 0;                       /* only do this once */
+        else {
+            // Uncompress up to left bytes into buf.
+            strm.avail_out = left < UINT_MAX ? (unsigned)left : UINT_MAX;
+            strm.next_out = buf + len - left;
         }
 
-        /* uncompress until avail_out filled, or end of stream */
-        do {
-            if (strm.avail_in == 0) {
-                strm.avail_in = fread(input, 1, CHUNK, in);
-                if (ferror(in)) {
-                    ret = Z_ERRNO;
-                    goto deflate_index_extract_ret;
-                }
-                if (strm.avail_in == 0) {
-                    ret = Z_DATA_ERROR;
-                    goto deflate_index_extract_ret;
-                }
-                strm.next_in = input;
+        // Uncompress, setting got to the number of bytes uncompressed.
+        if (strm.avail_in == 0) {
+            // Assure available input.
+            strm.avail_in = fread(input, 1, CHUNK, in);
+            if (strm.avail_in < CHUNK && ferror(in)) {
+                ret = Z_ERRNO;
+                break;
+            }
+            strm.next_in = input;
+        }
+        unsigned got = strm.avail_out;
+        ret = inflate(&strm, Z_NO_FLUSH);
+        got -= strm.avail_out;
+
+        // Update the appropriate count.
+        if (offset)
+            offset -= got;
+        else
+            left -= got;
+
+        // If we're at the end of a gzip member and there's more to read,
+        // continue to the next gzip member.
+        if (ret == Z_STREAM_END && index->mode == GZIP) {
+            // Discard the gzip trailer.
+            unsigned drop = 8;              // length of gzip trailer
+            if (strm.avail_in >= drop) {
+                strm.avail_in -= drop;
+                strm.next_in += drop;
+            }
+            else {
+                // Read and discard the remainder of the gzip trailer.
+                drop -= strm.avail_in;
+                strm.avail_in = 0;
+                do {
+                    if (getc(in) == EOF)
+                        // The input does not have a complete trailer.
+                        return ferror(in) ? Z_ERRNO : Z_BUF_ERROR;
+                } while (--drop);
             }
-            ret = inflate(&strm, Z_NO_FLUSH);       /* normal inflate */
-            if (ret == Z_NEED_DICT)
-                ret = Z_DATA_ERROR;
-            if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
-                goto deflate_index_extract_ret;
-            if (ret == Z_STREAM_END) {
-                /* the raw deflate stream has ended */
-                if (index->gzip == 0)
-                    /* this is a zlib stream that has ended -- done */
-                    break;
-
-                /* near the end of a gzip member, which might be followed by
-                   another gzip member -- skip the gzip trailer and see if
-                   there is more input after it */
-                if (strm.avail_in < 8) {
-                    fseeko(in, 8 - strm.avail_in, SEEK_CUR);
-                    strm.avail_in = 0;
-                }
-                else {
-                    strm.avail_in -= 8;
-                    strm.next_in += 8;
-                }
-                if (strm.avail_in == 0 && ungetc(getc(in), in) == EOF)
-                    /* the input ended after the gzip trailer -- done */
-                    break;
 
-                /* there is more input, so another gzip member should follow --
-                   validate and skip the gzip header */
-                ret = inflateReset2(&strm, 31);
-                if (ret != Z_OK)
-                    goto deflate_index_extract_ret;
+            if (strm.avail_in || ungetc(getc(in), in) != EOF) {
+                // There's more after the gzip trailer. Use inflate to skip the
+                // gzip header and resume the raw inflate there.
+                inflateReset2(&strm, GZIP);
                 do {
                     if (strm.avail_in == 0) {
                         strm.avail_in = fread(input, 1, CHUNK, in);
-                        if (ferror(in)) {
+                        if (strm.avail_in < CHUNK && ferror(in)) {
                             ret = Z_ERRNO;
-                            goto deflate_index_extract_ret;
-                        }
-                        if (strm.avail_in == 0) {
-                            ret = Z_DATA_ERROR;
-                            goto deflate_index_extract_ret;
+                            break;
                         }
                         strm.next_in = input;
                     }
-                    ret = inflate(&strm, Z_BLOCK);
-                    if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
-                        goto deflate_index_extract_ret;
-                } while ((strm.data_type & 128) == 0);
-
-                /* set up to continue decompression of the raw deflate stream
-                   that follows the gzip header */
-                ret = inflateReset2(&strm, -15);
+                    strm.avail_out = WINSIZE;
+                    strm.next_out = discard;
+                    ret = inflate(&strm, Z_BLOCK);  // stop at end of header
+                } while (ret == Z_OK && (strm.data_type & 0x80) == 0);
                 if (ret != Z_OK)
-                    goto deflate_index_extract_ret;
+                    break;
+                inflateReset2(&strm, RAW);
             }
+        }
 
-            /* continue to process the available input before reading more */
-        } while (strm.avail_out != 0);
-
-        if (ret == Z_STREAM_END)
-            /* reached the end of the compressed data -- return the data that
-               was available, possibly less than requested */
-            break;
-
-        /* do until offset reached and requested data read */
-    } while (skip);
-
-    /* compute the number of uncompressed bytes read after the offset */
-    ret = skip ? 0 : len - strm.avail_out;
+        // Continue until we have the requested data, the deflate data has
+        // ended, or an error is encountered.
+    } while (ret == Z_OK && left);
+    inflateEnd(&strm);
 
-    /* clean up and return the bytes read, or the negative error */
-  deflate_index_extract_ret:
-    (void)inflateEnd(&strm);
-    return ret;
+    // Return the number of uncompressed bytes read into buf, or the error.
+    return ret == Z_OK || ret == Z_STREAM_END ? len - left : ret;
 }
 
 #ifdef TEST
 
-#define SPAN 1048576L       /* desired distance between access points */
-#define LEN 16384           /* number of bytes to extract */
-
-/* Demonstrate the use of deflate_index_build() and deflate_index_extract() by
-   processing the file provided on the command line, and extracting LEN bytes
-   from 2/3rds of the way through the uncompressed output, writing that to
-   stdout. An offset can be provided as the second argument, in which case the
-   data is extracted from there instead. */
-int main(int argc, char **argv)
-{
-    int len;
-    off_t offset = -1;
-    FILE *in;
-    struct deflate_index *index = NULL;
-    unsigned char buf[LEN];
+#define SPAN 1048576L       // desired distance between access points
+#define LEN 16384           // number of bytes to extract
 
-    /* open input file */
+// Demonstrate the use of deflate_index_build() and deflate_index_extract() by
+// processing the file provided on the command line, and extracting LEN bytes
+// from 2/3rds of the way through the uncompressed output, writing that to
+// stdout. An offset can be provided as the second argument, in which case the
+// data is extracted from there instead.
+int main(int argc, char **argv) {
+    // Open the input file.
     if (argc < 2 || argc > 3) {
-        fprintf(stderr, "usage: zran file.gz [offset]\n");
+        fprintf(stderr, "usage: zran file.raw [offset]\n");
         return 1;
     }
-    in = fopen(argv[1], "rb");
+    FILE *in = fopen(argv[1], "rb");
     if (in == NULL) {
         fprintf(stderr, "zran: could not open %s for reading\n", argv[1]);
         return 1;
     }
 
-    /* get optional offset */
+    // Get optional offset.
+    off_t offset = -1;
     if (argc == 3) {
         char *end;
         offset = strtoll(argv[2], &end, 10);
@@ -437,14 +486,18 @@ int main(int argc, char **argv)
         }
     }
 
-    /* build index */
-    len = deflate_index_build(in, SPAN, &index);
+    // Build index.
+    struct deflate_index *index = NULL;
+    int len = deflate_index_build(in, SPAN, &index);
     if (len < 0) {
         fclose(in);
         switch (len) {
         case Z_MEM_ERROR:
             fprintf(stderr, "zran: out of memory\n");
             break;
+        case Z_BUF_ERROR:
+            fprintf(stderr, "zran: %s ended prematurely\n", argv[1]);
+            break;
         case Z_DATA_ERROR:
             fprintf(stderr, "zran: compressed data error in %s\n", argv[1]);
             break;
@@ -458,19 +511,20 @@ int main(int argc, char **argv)
     }
     fprintf(stderr, "zran: built index with %d access points\n", len);
 
-    /* use index by reading some bytes from an arbitrary offset */
+    // Use index by reading some bytes from an arbitrary offset.
+    unsigned char buf[LEN];
     if (offset == -1)
-        offset = (index->length << 1) / 3;
-    len = deflate_index_extract(in, index, offset, buf, LEN);
-    if (len < 0)
+        offset = ((index->length + 1) << 1) / 3;
+    ptrdiff_t got = deflate_index_extract(in, index, offset, buf, LEN);
+    if (got < 0)
         fprintf(stderr, "zran: extraction failed: %s error\n",
-                len == Z_MEM_ERROR ? "out of memory" : "input corrupted");
+                got == Z_MEM_ERROR ? "out of memory" : "input corrupted");
     else {
-        fwrite(buf, 1, len, stdout);
-        fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset);
+        fwrite(buf, 1, got, stdout);
+        fprintf(stderr, "zran: extracted %ld bytes at %lld\n", got, offset);
     }
 
-    /* clean up and exit */
+    // Clean up and exit.
     deflate_index_free(index);
     fclose(in);
     return 0;
diff --git a/compat/zlib/examples/zran.h b/compat/zlib/examples/zran.h
index 2314125..ebf780d 100644
--- a/compat/zlib/examples/zran.h
+++ b/compat/zlib/examples/zran.h
@@ -1,40 +1,51 @@
-/* zran.h -- example of zlib/gzip stream indexing and random access
- * Copyright (C) 2005, 2012, 2018 Mark Adler
+/* zran.h -- example of deflated stream indexing and random access
+ * Copyright (C) 2005, 2012, 2018, 2023 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
- * Version 1.2  14 Oct 2018  Mark Adler */
+ * Version 1.3  18 Feb 2023  Mark Adler */
 
 #include <stdio.h>
 #include "zlib.h"
 
-/* Access point list. */
+// Access point.
+typedef struct point {
+    off_t out;          // offset in uncompressed data
+    off_t in;           // offset in compressed file of first full byte
+    int bits;           // 0, or number of bits (1-7) from byte at in-1
+    unsigned char window[32768];    // preceding 32K of uncompressed data
+} point_t;
+
+// Access point list.
 struct deflate_index {
-    int have;           /* number of list entries */
-    int gzip;           /* 1 if the index is of a gzip file, 0 if it is of a
-                           zlib stream */
-    off_t length;       /* total length of uncompressed data */
-    void *list;         /* allocated list of entries */
+    int have;           // number of access points in list
+    int mode;           // -15 for raw, 15 for zlib, or 31 for gzip
+    off_t length;       // total length of uncompressed data
+    point_t *list;      // allocated list of access points
 };
 
-/* Make one entire pass through a zlib or gzip compressed stream and build an
-   index, with access points about every span bytes of uncompressed output.
-   gzip files with multiple members are indexed in their entirety. span should
-   be chosen to balance the speed of random access against the memory
-   requirements of the list, about 32K bytes per access point. The return value
-   is the number of access points on success (>= 1), Z_MEM_ERROR for out of
-   memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a file
-   read error. On success, *built points to the resulting index. */
+// Make one pass through a zlib, gzip, or raw deflate compressed stream and
+// build an index, with access points about every span bytes of uncompressed
+// output. gzip files with multiple members are fully indexed. span should be
+// chosen to balance the speed of random access against the memory requirements
+// of the list, which is about 32K bytes per access point. The return value is
+// the number of access points on success (>= 1), Z_MEM_ERROR for out of
+// memory, Z_BUF_ERROR for a premature end of input, Z_DATA_ERROR for a format
+// or verification error in the input file, or Z_ERRNO for a file read error.
+// On success, *built points to the resulting index.
 int deflate_index_build(FILE *in, off_t span, struct deflate_index **built);
 
-/* Deallocate an index built by deflate_index_build() */
-void deflate_index_free(struct deflate_index *index);
+// Use the index to read len bytes from offset into buf. Return the number of
+// bytes read or a negative error code. If data is requested past the end of
+// the uncompressed data, then deflate_index_extract() will return a value less
+// than len, indicating how much was actually read into buf. If given a valid
+// index, this function should not return an error unless the file was modified
+// somehow since the index was generated, given that deflate_index_build() had
+// validated all of the input. If nevertheless there is a failure, Z_BUF_ERROR
+// is returned if the compressed data ends prematurely, Z_DATA_ERROR if the
+// deflate compressed data is not valid, Z_MEM_ERROR if out of memory,
+// Z_STREAM_ERROR if the index is not valid, or Z_ERRNO if there is an error
+// reading or seeking on the input file.
+ptrdiff_t deflate_index_extract(FILE *in, struct deflate_index *index,
+                                off_t offset, unsigned char *buf, size_t len);
 
-/* Use the index to read len bytes from offset into buf. Return bytes read or
-   negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past
-   the end of the uncompressed data, then deflate_index_extract() will return a
-   value less than len, indicating how much was actually read into buf. This
-   function should not return a data error unless the file was modified since
-   the index was generated, since deflate_index_build() validated all of the
-   input. deflate_index_extract() will return Z_ERRNO if there is an error on
-   reading or seeking the input file. */
-int deflate_index_extract(FILE *in, struct deflate_index *index, off_t offset,
-                          unsigned char *buf, int len);
+// Deallocate an index built by deflate_index_build().
+void deflate_index_free(struct deflate_index *index);
diff --git a/compat/zlib/gzclose.c b/compat/zlib/gzclose.c
index caeb99a..48d6a86 100644
--- a/compat/zlib/gzclose.c
+++ b/compat/zlib/gzclose.c
@@ -8,9 +8,7 @@
 /* gzclose() is in a separate file so that it is linked in only if it is used.
    That way the other gzclose functions can be used instead to avoid linking in
    unneeded compression or decompression routines. */
-int ZEXPORT gzclose(file)
-    gzFile file;
-{
+int ZEXPORT gzclose(gzFile file) {
 #ifndef NO_GZCOMPRESS
     gz_statep state;
 
diff --git a/compat/zlib/gzguts.h b/compat/zlib/gzguts.h
index 57faf37..f937504 100644
--- a/compat/zlib/gzguts.h
+++ b/compat/zlib/gzguts.h
@@ -7,9 +7,8 @@
 #  ifndef _LARGEFILE_SOURCE
 #    define _LARGEFILE_SOURCE 1
 #  endif
-#  ifdef _FILE_OFFSET_BITS
-#    undef _FILE_OFFSET_BITS
-#  endif
+#  undef _FILE_OFFSET_BITS
+#  undef _TIME_BITS
 #endif
 
 #ifdef HAVE_HIDDEN
@@ -119,8 +118,8 @@
 
 /* gz* functions always use library allocation functions */
 #ifndef STDC
-  extern voidp  malloc OF((uInt size));
-  extern void   free   OF((voidpf ptr));
+  extern voidp  malloc(uInt size);
+  extern void   free(voidpf ptr);
 #endif
 
 /* get errno and strerror definition */
@@ -138,10 +137,10 @@
 
 /* provide prototypes for these when building zlib without LFS */
 #if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
-    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+    ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *);
+    ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int);
+    ZEXTERN z_off64_t ZEXPORT gztell64(gzFile);
+    ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile);
 #endif
 
 /* default memLevel */
@@ -203,9 +202,9 @@ typedef struct {
 typedef gz_state FAR *gz_statep;
 
 /* shared functions */
-void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
+void ZLIB_INTERNAL gz_error(gz_statep, int, const char *);
 #if defined UNDER_CE
-char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
+char ZLIB_INTERNAL *gz_strwinerror(DWORD error);
 #endif
 
 /* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
@@ -214,6 +213,6 @@ char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
 #ifdef INT_MAX
 #  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
 #else
-unsigned ZLIB_INTERNAL gz_intmax OF((void));
+unsigned ZLIB_INTERNAL gz_intmax(void);
 #  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
 #endif
diff --git a/compat/zlib/gzlib.c b/compat/zlib/gzlib.c
index 55da46a..29fc448 100644
--- a/compat/zlib/gzlib.c
+++ b/compat/zlib/gzlib.c
@@ -15,10 +15,6 @@
 #endif
 #endif
 
-/* Local functions */
-local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const void *, int, const char *));
-
 #if defined UNDER_CE
 
 /* Map the Windows error number in ERROR to a locale-dependent error message
@@ -30,9 +26,7 @@ local gzFile gz_open OF((const void *, int, const char *));
 
    The gz_strwinerror function does not change the current setting of
    GetLastError. */
-char ZLIB_INTERNAL *gz_strwinerror(error)
-     DWORD error;
-{
+char ZLIB_INTERNAL *gz_strwinerror(DWORD error) {
     static char buf[1024];
 
     wchar_t *msgbuf;
@@ -72,9 +66,7 @@ char ZLIB_INTERNAL *gz_strwinerror(error)
 #endif /* UNDER_CE */
 
 /* Reset gzip file state */
-local void gz_reset(state)
-    gz_statep state;
-{
+local void gz_reset(gz_statep state) {
     state->x.have = 0;              /* no output data available */
     if (state->mode == GZ_READ) {   /* for reading ... */
         state->eof = 0;             /* not at end of file */
@@ -90,11 +82,7 @@ local void gz_reset(state)
 }
 
 /* Open a gzip file either by name or file descriptor. */
-local gzFile gz_open(path, fd, mode)
-    const void *path;
-    int fd;
-    const char *mode;
-{
+local gzFile gz_open(const void *path, int fd, const char *mode) {
     gz_statep state;
     z_size_t len;
     int oflag;
@@ -269,26 +257,17 @@ local gzFile gz_open(path, fd, mode)
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzopen(path, mode)
-    const char *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen(const char *path, const char *mode) {
     return gz_open(path, -1, mode);
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzopen64(path, mode)
-    const char *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen64(const char *path, const char *mode) {
     return gz_open(path, -1, mode);
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzdopen(fd, mode)
-    int fd;
-    const char *mode;
-{
+gzFile ZEXPORT gzdopen(int fd, const char *mode) {
     char *path;         /* identifier for error messages */
     gzFile gz;
 
@@ -306,19 +285,13 @@ gzFile ZEXPORT gzdopen(fd, mode)
 
 /* -- see zlib.h -- */
 #ifdef WIDECHAR
-gzFile ZEXPORT gzopen_w(path, mode)
-    const wchar_t *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen_w(const wchar_t *path, const char *mode) {
     return gz_open(path, -2, mode);
 }
 #endif
 
 /* -- see zlib.h -- */
-int ZEXPORT gzbuffer(file, size)
-    gzFile file;
-    unsigned size;
-{
+int ZEXPORT gzbuffer(gzFile file, unsigned size) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -335,16 +308,14 @@ int ZEXPORT gzbuffer(file, size)
     /* check and set requested size */
     if ((size << 1) < size)
         return -1;              /* need to be able to double it */
-    if (size < 2)
-        size = 2;               /* need two bytes to check magic header */
+    if (size < 8)
+        size = 8;               /* needed to behave well with flushing */
     state->want = size;
     return 0;
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzrewind(file)
-    gzFile file;
-{
+int ZEXPORT gzrewind(gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -365,11 +336,7 @@ int ZEXPORT gzrewind(file)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gzseek64(file, offset, whence)
-    gzFile file;
-    z_off64_t offset;
-    int whence;
-{
+z_off64_t ZEXPORT gzseek64(gzFile file, z_off64_t offset, int whence) {
     unsigned n;
     z_off64_t ret;
     gz_statep state;
@@ -442,11 +409,7 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gzseek(file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
+z_off_t ZEXPORT gzseek(gzFile file, z_off_t offset, int whence) {
     z_off64_t ret;
 
     ret = gzseek64(file, (z_off64_t)offset, whence);
@@ -454,9 +417,7 @@ z_off_t ZEXPORT gzseek(file, offset, whence)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gztell64(file)
-    gzFile file;
-{
+z_off64_t ZEXPORT gztell64(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -471,9 +432,7 @@ z_off64_t ZEXPORT gztell64(file)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gztell(file)
-    gzFile file;
-{
+z_off_t ZEXPORT gztell(gzFile file) {
     z_off64_t ret;
 
     ret = gztell64(file);
@@ -481,9 +440,7 @@ z_off_t ZEXPORT gztell(file)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gzoffset64(file)
-    gzFile file;
-{
+z_off64_t ZEXPORT gzoffset64(gzFile file) {
     z_off64_t offset;
     gz_statep state;
 
@@ -504,9 +461,7 @@ z_off64_t ZEXPORT gzoffset64(file)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gzoffset(file)
-    gzFile file;
-{
+z_off_t ZEXPORT gzoffset(gzFile file) {
     z_off64_t ret;
 
     ret = gzoffset64(file);
@@ -514,9 +469,7 @@ z_off_t ZEXPORT gzoffset(file)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzeof(file)
-    gzFile file;
-{
+int ZEXPORT gzeof(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -531,10 +484,7 @@ int ZEXPORT gzeof(file)
 }
 
 /* -- see zlib.h -- */
-const char * ZEXPORT gzerror(file, errnum)
-    gzFile file;
-    int *errnum;
-{
+const char * ZEXPORT gzerror(gzFile file, int *errnum) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -552,9 +502,7 @@ const char * ZEXPORT gzerror(file, errnum)
 }
 
 /* -- see zlib.h -- */
-void ZEXPORT gzclearerr(file)
-    gzFile file;
-{
+void ZEXPORT gzclearerr(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -578,11 +526,7 @@ void ZEXPORT gzclearerr(file)
    memory).  Simply save the error message as a static string.  If there is an
    allocation failure constructing the error message, then convert the error to
    out of memory. */
-void ZLIB_INTERNAL gz_error(state, err, msg)
-    gz_statep state;
-    int err;
-    const char *msg;
-{
+void ZLIB_INTERNAL gz_error(gz_statep state, int err, const char *msg) {
     /* free previously allocated message and clear */
     if (state->msg != NULL) {
         if (state->err != Z_MEM_ERROR)
@@ -624,8 +568,7 @@ void ZLIB_INTERNAL gz_error(state, err, msg)
    available) -- we need to do this to cover cases where 2's complement not
    used, since C standard permits 1's complement and sign-bit representations,
    otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZLIB_INTERNAL gz_intmax()
-{
+unsigned ZLIB_INTERNAL gz_intmax(void) {
     unsigned p, q;
 
     p = 1;
diff --git a/compat/zlib/gzread.c b/compat/zlib/gzread.c
index dd77381..4168cbc 100644
--- a/compat/zlib/gzread.c
+++ b/compat/zlib/gzread.c
@@ -5,25 +5,12 @@
 
 #include "gzguts.h"
 
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_look OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_fetch OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-local z_size_t gz_read OF((gz_statep, voidp, z_size_t));
-
 /* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
    state->fd, and update state->eof, state->err, and state->msg as appropriate.
    This function needs to loop on read(), since read() is not guaranteed to
    read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
-    gz_statep state;
-    unsigned char *buf;
-    unsigned len;
-    unsigned *have;
-{
+local int gz_load(gz_statep state, unsigned char *buf, unsigned len,
+                  unsigned *have) {
     int ret;
     unsigned get, max = ((unsigned)-1 >> 2) + 1;
 
@@ -53,9 +40,7 @@ local int gz_load(state, buf, len, have)
    If strm->avail_in != 0, then the current data is moved to the beginning of
    the input buffer, and then the remainder of the buffer is loaded with the
    available data from the input file. */
-local int gz_avail(state)
-    gz_statep state;
-{
+local int gz_avail(gz_statep state) {
     unsigned got;
     z_streamp strm = &(state->strm);
 
@@ -88,9 +73,7 @@ local int gz_avail(state)
    case, all further file reads will be directly to either the output buffer or
    a user buffer.  If decompressing, the inflate state will be initialized.
    gz_look() will return 0 on success or -1 on failure. */
-local int gz_look(state)
-    gz_statep state;
-{
+local int gz_look(gz_statep state) {
     z_streamp strm = &(state->strm);
 
     /* allocate read buffers and inflate memory */
@@ -170,9 +153,7 @@ local int gz_look(state)
    data.  If the gzip stream completes, state->how is reset to LOOK to look for
    the next gzip stream or raw data, once state->x.have is depleted.  Returns 0
    on success, -1 on failure. */
-local int gz_decomp(state)
-    gz_statep state;
-{
+local int gz_decomp(gz_statep state) {
     int ret = Z_OK;
     unsigned had;
     z_streamp strm = &(state->strm);
@@ -224,9 +205,7 @@ local int gz_decomp(state)
    looked for to determine whether to copy or decompress.  Returns -1 on error,
    otherwise 0.  gz_fetch() will leave state->how as COPY or GZIP unless the
    end of the input file has been reached and all data has been processed.  */
-local int gz_fetch(state)
-    gz_statep state;
-{
+local int gz_fetch(gz_statep state) {
     z_streamp strm = &(state->strm);
 
     do {
@@ -254,10 +233,7 @@ local int gz_fetch(state)
 }
 
 /* Skip len uncompressed bytes of output.  Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
+local int gz_skip(gz_statep state, z_off64_t len) {
     unsigned n;
 
     /* skip over len bytes or reach end-of-file, whichever comes first */
@@ -289,11 +265,7 @@ local int gz_skip(state, len)
    input.  Return the number of bytes read.  If zero is returned, either the
    end of file was reached, or there was an error.  state->err must be
    consulted in that case to determine which. */
-local z_size_t gz_read(state, buf, len)
-    gz_statep state;
-    voidp buf;
-    z_size_t len;
-{
+local z_size_t gz_read(gz_statep state, voidp buf, z_size_t len) {
     z_size_t got;
     unsigned n;
 
@@ -370,11 +342,7 @@ local z_size_t gz_read(state, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
+int ZEXPORT gzread(gzFile file, voidp buf, unsigned len) {
     gz_statep state;
 
     /* get internal structure */
@@ -406,12 +374,7 @@ int ZEXPORT gzread(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-z_size_t ZEXPORT gzfread(buf, size, nitems, file)
-    voidp buf;
-    z_size_t size;
-    z_size_t nitems;
-    gzFile file;
-{
+z_size_t ZEXPORT gzfread(voidp buf, z_size_t size, z_size_t nitems, gzFile file) {
     z_size_t len;
     gz_statep state;
 
@@ -442,9 +405,7 @@ z_size_t ZEXPORT gzfread(buf, size, nitems, file)
 #else
 #  undef gzgetc
 #endif
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
+int ZEXPORT gzgetc(gzFile file) {
     unsigned char buf[1];
     gz_statep state;
 
@@ -469,17 +430,12 @@ int ZEXPORT gzgetc(file)
     return gz_read(state, buf, 1) < 1 ? -1 : buf[0];
 }
 
-int ZEXPORT gzgetc_(file)
-gzFile file;
-{
+int ZEXPORT gzgetc_(gzFile file) {
     return gzgetc(file);
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
-    int c;
-    gzFile file;
-{
+int ZEXPORT gzungetc(int c, gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -487,6 +443,10 @@ int ZEXPORT gzungetc(c, file)
         return -1;
     state = (gz_statep)file;
 
+    /* in case this was just opened, set up the input buffer */
+    if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
+        (void)gz_look(state);
+
     /* check that we're reading and that there's no (serious) error */
     if (state->mode != GZ_READ ||
         (state->err != Z_OK && state->err != Z_BUF_ERROR))
@@ -536,11 +496,7 @@ int ZEXPORT gzungetc(c, file)
 }
 
 /* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
+char * ZEXPORT gzgets(gzFile file, char *buf, int len) {
     unsigned left, n;
     char *str;
     unsigned char *eol;
@@ -600,9 +556,7 @@ char * ZEXPORT gzgets(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
-    gzFile file;
-{
+int ZEXPORT gzdirect(gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -620,9 +574,7 @@ int ZEXPORT gzdirect(file)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
-    gzFile file;
-{
+int ZEXPORT gzclose_r(gzFile file) {
     int ret, err;
     gz_statep state;
 
diff --git a/compat/zlib/gzwrite.c b/compat/zlib/gzwrite.c
index eb8a0e5..435b462 100644
--- a/compat/zlib/gzwrite.c
+++ b/compat/zlib/gzwrite.c
@@ -5,18 +5,10 @@
 
 #include "gzguts.h"
 
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-local z_size_t gz_write OF((gz_statep, voidpc, z_size_t));
-
 /* Initialize state for writing a gzip file.  Mark initialization by setting
    state->size to non-zero.  Return -1 on a memory allocation failure, or 0 on
    success. */
-local int gz_init(state)
-    gz_statep state;
-{
+local int gz_init(gz_statep state) {
     int ret;
     z_streamp strm = &(state->strm);
 
@@ -70,10 +62,7 @@ local int gz_init(state)
    deflate() flush value.  If flush is Z_FINISH, then the deflate() state is
    reset to start a new gzip stream.  If gz->direct is true, then simply write
    to the output file without compressing, and ignore flush. */
-local int gz_comp(state, flush)
-    gz_statep state;
-    int flush;
-{
+local int gz_comp(gz_statep state, int flush) {
     int ret, writ;
     unsigned have, put, max = ((unsigned)-1 >> 2) + 1;
     z_streamp strm = &(state->strm);
@@ -151,10 +140,7 @@ local int gz_comp(state, flush)
 
 /* Compress len zeros to output.  Return -1 on a write error or memory
    allocation failure by gz_comp(), or 0 on success. */
-local int gz_zero(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
+local int gz_zero(gz_statep state, z_off64_t len) {
     int first;
     unsigned n;
     z_streamp strm = &(state->strm);
@@ -184,11 +170,7 @@ local int gz_zero(state, len)
 
 /* Write len bytes from buf to file.  Return the number of bytes written.  If
    the returned value is less than len, then there was an error. */
-local z_size_t gz_write(state, buf, len)
-    gz_statep state;
-    voidpc buf;
-    z_size_t len;
-{
+local z_size_t gz_write(gz_statep state, voidpc buf, z_size_t len) {
     z_size_t put = len;
 
     /* if len is zero, avoid unnecessary operations */
@@ -252,11 +234,7 @@ local z_size_t gz_write(state, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
-    gzFile file;
-    voidpc buf;
-    unsigned len;
-{
+int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len) {
     gz_statep state;
 
     /* get internal structure */
@@ -280,12 +258,8 @@ int ZEXPORT gzwrite(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-z_size_t ZEXPORT gzfwrite(buf, size, nitems, file)
-    voidpc buf;
-    z_size_t size;
-    z_size_t nitems;
-    gzFile file;
-{
+z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size, z_size_t nitems,
+                          gzFile file) {
     z_size_t len;
     gz_statep state;
 
@@ -310,10 +284,7 @@ z_size_t ZEXPORT gzfwrite(buf, size, nitems, file)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
-    gzFile file;
-    int c;
-{
+int ZEXPORT gzputc(gzFile file, int c) {
     unsigned have;
     unsigned char buf[1];
     gz_statep state;
@@ -358,10 +329,7 @@ int ZEXPORT gzputc(file, c)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzputs(file, s)
-    gzFile file;
-    const char *s;
-{
+int ZEXPORT gzputs(gzFile file, const char *s) {
     z_size_t len, put;
     gz_statep state;
 
@@ -388,8 +356,7 @@ int ZEXPORT gzputs(file, s)
 #include <stdarg.h>
 
 /* -- see zlib.h -- */
-int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
-{
+int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va) {
     int len;
     unsigned left;
     char *next;
@@ -460,8 +427,7 @@ int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
     return len;
 }
 
-int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
-{
+int ZEXPORTVA gzprintf(gzFile file, const char *format, ...) {
     va_list va;
     int ret;
 
@@ -474,13 +440,10 @@ int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
 #else /* !STDC && !Z_HAVE_STDARG_H */
 
 /* -- see zlib.h -- */
-int ZEXPORTVA gzprintf(file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
-    gzFile file;
-    const char *format;
-    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
+int ZEXPORTVA gzprintf(gzFile file, const char *format, int a1, int a2, int a3,
+                       int a4, int a5, int a6, int a7, int a8, int a9, int a10,
+                       int a11, int a12, int a13, int a14, int a15, int a16,
+                       int a17, int a18, int a19, int a20) {
     unsigned len, left;
     char *next;
     gz_statep state;
@@ -562,10 +525,7 @@ int ZEXPORTVA gzprintf(file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
 #endif
 
 /* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
-    gzFile file;
-    int flush;
-{
+int ZEXPORT gzflush(gzFile file, int flush) {
     gz_statep state;
 
     /* get internal structure */
@@ -594,11 +554,7 @@ int ZEXPORT gzflush(file, flush)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
-    gzFile file;
-    int level;
-    int strategy;
-{
+int ZEXPORT gzsetparams(gzFile file, int level, int strategy) {
     gz_statep state;
     z_streamp strm;
 
@@ -609,7 +565,7 @@ int ZEXPORT gzsetparams(file, level, strategy)
     strm = &(state->strm);
 
     /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
+    if (state->mode != GZ_WRITE || state->err != Z_OK || state->direct)
         return Z_STREAM_ERROR;
 
     /* if no change is requested, then do nothing */
@@ -636,9 +592,7 @@ int ZEXPORT gzsetparams(file, level, strategy)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
-    gzFile file;
-{
+int ZEXPORT gzclose_w(gzFile file) {
     int ret = Z_OK;
     gz_statep state;
 
diff --git a/compat/zlib/infback.c b/compat/zlib/infback.c
index babeaf1..e7b25b3 100644
--- a/compat/zlib/infback.c
+++ b/compat/zlib/infback.c
@@ -15,9 +15,6 @@
 #include "inflate.h"
 #include "inffast.h"
 
-/* function prototypes */
-local void fixedtables OF((struct inflate_state FAR *state));
-
 /*
    strm provides memory allocation functions in zalloc and zfree, or
    Z_NULL to use the library memory allocation functions.
@@ -25,13 +22,9 @@ local void fixedtables OF((struct inflate_state FAR *state));
    windowBits is in the range 8..15, and window is a user-supplied
    window and output buffer that is 2**windowBits bytes.
  */
-int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
-z_streamp strm;
-int windowBits;
-unsigned char FAR *window;
-const char *version;
-int stream_size;
-{
+int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits,
+                             unsigned char FAR *window, const char *version,
+                             int stream_size) {
     struct inflate_state FAR *state;
 
     if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
@@ -80,9 +73,7 @@ int stream_size;
    used for threaded applications, since the rewriting of the tables and virgin
    may not be thread-safe.
  */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
+local void fixedtables(struct inflate_state FAR *state) {
 #ifdef BUILDFIXED
     static int virgin = 1;
     static code *lenfix, *distfix;
@@ -248,13 +239,8 @@ struct inflate_state FAR *state;
    inflateBack() can also return Z_STREAM_ERROR if the input parameters
    are not correct, i.e. strm is Z_NULL or the state was not initialized.
  */
-int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
-z_streamp strm;
-in_func in;
-void FAR *in_desc;
-out_func out;
-void FAR *out_desc;
-{
+int ZEXPORT inflateBack(z_streamp strm, in_func in, void FAR *in_desc,
+                        out_func out, void FAR *out_desc) {
     struct inflate_state FAR *state;
     z_const unsigned char FAR *next;    /* next input */
     unsigned char FAR *put;     /* next output */
@@ -632,9 +618,7 @@ void FAR *out_desc;
     return ret;
 }
 
-int ZEXPORT inflateBackEnd(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateBackEnd(z_streamp strm) {
     if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
         return Z_STREAM_ERROR;
     ZFREE(strm, strm->state);
diff --git a/compat/zlib/inffast.c b/compat/zlib/inffast.c
index 1fec7f3..9354676 100644
--- a/compat/zlib/inffast.c
+++ b/compat/zlib/inffast.c
@@ -47,10 +47,7 @@
       requires strm->avail_out >= 258 for each loop to avoid checking for
       output space.
  */
-void ZLIB_INTERNAL inflate_fast(strm, start)
-z_streamp strm;
-unsigned start;         /* inflate()'s starting value for strm->avail_out */
-{
+void ZLIB_INTERNAL inflate_fast(z_streamp strm, unsigned start) {
     struct inflate_state FAR *state;
     z_const unsigned char FAR *in;      /* local strm->next_in */
     z_const unsigned char FAR *last;    /* have enough input while in < last */
diff --git a/compat/zlib/inffast.h b/compat/zlib/inffast.h
index e5c1aa4..49c6d15 100644
--- a/compat/zlib/inffast.h
+++ b/compat/zlib/inffast.h
@@ -8,4 +8,4 @@
    subject to change. Applications should only use zlib.h.
  */
 
-void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
+void ZLIB_INTERNAL inflate_fast(z_streamp strm, unsigned start);
diff --git a/compat/zlib/inflate.c b/compat/zlib/inflate.c
index 8acbef4..b0757a9 100644
--- a/compat/zlib/inflate.c
+++ b/compat/zlib/inflate.c
@@ -91,20 +91,7 @@
 #  endif
 #endif
 
-/* function prototypes */
-local int inflateStateCheck OF((z_streamp strm));
-local void fixedtables OF((struct inflate_state FAR *state));
-local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
-                           unsigned copy));
-#ifdef BUILDFIXED
-   void makefixed OF((void));
-#endif
-local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
-                              unsigned len));
-
-local int inflateStateCheck(strm)
-z_streamp strm;
-{
+local int inflateStateCheck(z_streamp strm) {
     struct inflate_state FAR *state;
     if (strm == Z_NULL ||
         strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
@@ -116,9 +103,7 @@ z_streamp strm;
     return 0;
 }
 
-int ZEXPORT inflateResetKeep(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateResetKeep(z_streamp strm) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -142,9 +127,7 @@ z_streamp strm;
     return Z_OK;
 }
 
-int ZEXPORT inflateReset(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateReset(z_streamp strm) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -155,10 +138,7 @@ z_streamp strm;
     return inflateResetKeep(strm);
 }
 
-int ZEXPORT inflateReset2(strm, windowBits)
-z_streamp strm;
-int windowBits;
-{
+int ZEXPORT inflateReset2(z_streamp strm, int windowBits) {
     int wrap;
     struct inflate_state FAR *state;
 
@@ -195,12 +175,8 @@ int windowBits;
     return inflateReset(strm);
 }
 
-int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
-z_streamp strm;
-int windowBits;
-const char *version;
-int stream_size;
-{
+int ZEXPORT inflateInit2_(z_streamp strm, int windowBits,
+                          const char *version, int stream_size) {
     int ret;
     struct inflate_state FAR *state;
 
@@ -239,22 +215,17 @@ int stream_size;
     return ret;
 }
 
-int ZEXPORT inflateInit_(strm, version, stream_size)
-z_streamp strm;
-const char *version;
-int stream_size;
-{
+int ZEXPORT inflateInit_(z_streamp strm, const char *version,
+                         int stream_size) {
     return inflateInit2_(strm, DEF_WBITS, version, stream_size);
 }
 
-int ZEXPORT inflatePrime(strm, bits, value)
-z_streamp strm;
-int bits;
-int value;
-{
+int ZEXPORT inflatePrime(z_streamp strm, int bits, int value) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    if (bits == 0)
+        return Z_OK;
     state = (struct inflate_state FAR *)strm->state;
     if (bits < 0) {
         state->hold = 0;
@@ -278,9 +249,7 @@ int value;
    used for threaded applications, since the rewriting of the tables and virgin
    may not be thread-safe.
  */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
+local void fixedtables(struct inflate_state FAR *state) {
 #ifdef BUILDFIXED
     static int virgin = 1;
     static code *lenfix, *distfix;
@@ -342,7 +311,7 @@ struct inflate_state FAR *state;
 
     a.out > inffixed.h
  */
-void makefixed()
+void makefixed(void)
 {
     unsigned low, size;
     struct inflate_state state;
@@ -396,11 +365,7 @@ void makefixed()
    output will fall in the output data, making match copies simpler and faster.
    The advantage may be dependent on the size of the processor's data caches.
  */
-local int updatewindow(strm, end, copy)
-z_streamp strm;
-const Bytef *end;
-unsigned copy;
-{
+local int updatewindow(z_streamp strm, const Bytef *end, unsigned copy) {
     struct inflate_state FAR *state;
     unsigned dist;
 
@@ -622,10 +587,7 @@ unsigned copy;
    will return Z_BUF_ERROR if it has not reached the end of the stream.
  */
 
-int ZEXPORT inflate(strm, flush)
-z_streamp strm;
-int flush;
-{
+int ZEXPORT inflate(z_streamp strm, int flush) {
     struct inflate_state FAR *state;
     z_const unsigned char FAR *next;    /* next input */
     unsigned char FAR *put;     /* next output */
@@ -1301,9 +1263,7 @@ int flush;
     return ret;
 }
 
-int ZEXPORT inflateEnd(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateEnd(z_streamp strm) {
     struct inflate_state FAR *state;
     if (inflateStateCheck(strm))
         return Z_STREAM_ERROR;
@@ -1315,11 +1275,8 @@ z_streamp strm;
     return Z_OK;
 }
 
-int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
-z_streamp strm;
-Bytef *dictionary;
-uInt *dictLength;
-{
+int ZEXPORT inflateGetDictionary(z_streamp strm, Bytef *dictionary,
+                                 uInt *dictLength) {
     struct inflate_state FAR *state;
 
     /* check state */
@@ -1338,11 +1295,8 @@ uInt *dictLength;
     return Z_OK;
 }
 
-int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
-z_streamp strm;
-const Bytef *dictionary;
-uInt dictLength;
-{
+int ZEXPORT inflateSetDictionary(z_streamp strm, const Bytef *dictionary,
+                                 uInt dictLength) {
     struct inflate_state FAR *state;
     unsigned long dictid;
     int ret;
@@ -1373,10 +1327,7 @@ uInt dictLength;
     return Z_OK;
 }
 
-int ZEXPORT inflateGetHeader(strm, head)
-z_streamp strm;
-gz_headerp head;
-{
+int ZEXPORT inflateGetHeader(z_streamp strm, gz_headerp head) {
     struct inflate_state FAR *state;
 
     /* check state */
@@ -1401,11 +1352,8 @@ gz_headerp head;
    called again with more data and the *have state.  *have is initialized to
    zero for the first call.
  */
-local unsigned syncsearch(have, buf, len)
-unsigned FAR *have;
-const unsigned char FAR *buf;
-unsigned len;
-{
+local unsigned syncsearch(unsigned FAR *have, const unsigned char FAR *buf,
+                          unsigned len) {
     unsigned got;
     unsigned next;
 
@@ -1424,9 +1372,7 @@ unsigned len;
     return next;
 }
 
-int ZEXPORT inflateSync(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateSync(z_streamp strm) {
     unsigned len;               /* number of bytes to look at or looked at */
     int flags;                  /* temporary to save header status */
     unsigned long in, out;      /* temporary to save total_in and total_out */
@@ -1482,9 +1428,7 @@ z_streamp strm;
    block. When decompressing, PPP checks that at the end of input packet,
    inflate is waiting for these length bytes.
  */
-int ZEXPORT inflateSyncPoint(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateSyncPoint(z_streamp strm) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -1492,10 +1436,7 @@ z_streamp strm;
     return state->mode == STORED && state->bits == 0;
 }
 
-int ZEXPORT inflateCopy(dest, source)
-z_streamp dest;
-z_streamp source;
-{
+int ZEXPORT inflateCopy(z_streamp dest, z_streamp source) {
     struct inflate_state FAR *state;
     struct inflate_state FAR *copy;
     unsigned char FAR *window;
@@ -1539,10 +1480,7 @@ z_streamp source;
     return Z_OK;
 }
 
-int ZEXPORT inflateUndermine(strm, subvert)
-z_streamp strm;
-int subvert;
-{
+int ZEXPORT inflateUndermine(z_streamp strm, int subvert) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -1557,10 +1495,7 @@ int subvert;
 #endif
 }
 
-int ZEXPORT inflateValidate(strm, check)
-z_streamp strm;
-int check;
-{
+int ZEXPORT inflateValidate(z_streamp strm, int check) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -1572,9 +1507,7 @@ int check;
     return Z_OK;
 }
 
-long ZEXPORT inflateMark(strm)
-z_streamp strm;
-{
+long ZEXPORT inflateMark(z_streamp strm) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm))
@@ -1585,9 +1518,7 @@ z_streamp strm;
             (state->mode == MATCH ? state->was - state->length : 0));
 }
 
-unsigned long ZEXPORT inflateCodesUsed(strm)
-z_streamp strm;
-{
+unsigned long ZEXPORT inflateCodesUsed(z_streamp strm) {
     struct inflate_state FAR *state;
     if (inflateStateCheck(strm)) return (unsigned long)-1;
     state = (struct inflate_state FAR *)strm->state;
diff --git a/compat/zlib/inftrees.c b/compat/zlib/inftrees.c
index 57d2793..8a208c2 100644
--- a/compat/zlib/inftrees.c
+++ b/compat/zlib/inftrees.c
@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2022 Mark Adler
+ * Copyright (C) 1995-2023 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.13 Copyright 1995-2022 Mark Adler ";
+   " inflate 1.3 Copyright 1995-2023 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -29,14 +29,9 @@ const char inflate_copyright[] =
    table index bits.  It will differ if the request is greater than the
    longest code or if it is less than the shortest code.
  */
-int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
-{
+int ZLIB_INTERNAL inflate_table(codetype type, unsigned short FAR *lens,
+                                unsigned codes, code FAR * FAR *table,
+                                unsigned FAR *bits, unsigned short FAR *work) {
     unsigned len;               /* a code's length in bits */
     unsigned sym;               /* index of code symbols */
     unsigned min, max;          /* minimum and maximum code lengths */
@@ -62,7 +57,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 194, 65};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 198, 203};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
diff --git a/compat/zlib/inftrees.h b/compat/zlib/inftrees.h
index f536653..a10712d 100644
--- a/compat/zlib/inftrees.h
+++ b/compat/zlib/inftrees.h
@@ -57,6 +57,6 @@ typedef enum {
     DISTS
 } codetype;
 
-int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
-                             unsigned codes, code FAR * FAR *table,
-                             unsigned FAR *bits, unsigned short FAR *work));
+int ZLIB_INTERNAL inflate_table(codetype type, unsigned short FAR *lens,
+                                unsigned codes, code FAR * FAR *table,
+                                unsigned FAR *bits, unsigned short FAR *work);
diff --git a/compat/zlib/os400/README400 b/compat/zlib/os400/README400
index c06fa84..6dd41aa 100644
--- a/compat/zlib/os400/README400
+++ b/compat/zlib/os400/README400
@@ -1,4 +1,4 @@
-        ZLIB version 1.2.13 for OS/400 installation instructions
+        ZLIB version 1.3.0 for OS/400 installation instructions
 
 1) Download and unpack the zlib tarball to some IFS directory.
    (i.e.: /path/to/the/zlib/ifs/source/directory)
diff --git a/compat/zlib/os400/zlib.inc b/compat/zlib/os400/zlib.inc
index c273c86..0d9e2f2 100644
--- a/compat/zlib/os400/zlib.inc
+++ b/compat/zlib/os400/zlib.inc
@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.13
+      *  Version 1.3.0
       *
       *
       *  WARNING:
@@ -22,12 +22,12 @@
       *
       *  Versioning information.
       *
-     D ZLIB_VERSION    C                   '1.2.13'
+     D ZLIB_VERSION    C                   '1.3.0'
      D ZLIB_VERNUM     C                   X'12a0'
      D ZLIB_VER_MAJOR  C                   1
-     D ZLIB_VER_MINOR  C                   2
+     D ZLIB_VER_MINOR  C                   3
      D ZLIB_VER_REVISION...
-     D                 C                   13
+     D                 C                   0
      D ZLIB_VER_SUBREVISION...
      D                 C                   0
       *
diff --git a/compat/zlib/qnx/package.qpg b/compat/zlib/qnx/package.qpg
index ba2f1a2..d882af2 100644
--- a/compat/zlib/qnx/package.qpg
+++ b/compat/zlib/qnx/package.qpg
@@ -25,10 +25,10 @@
       <QPG:Files>
          <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
          <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.13" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.13"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.13"/>
-         <QPG:Add file="../libz.so.1.2.13" install="/opt/lib/" component="slib"/>
+         <QPG:Add file="../libz.so.1.3.0" install="/opt/lib/" user="root:bin" permission="644"/>
+         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.3.0"/>
+         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.3.0"/>
+         <QPG:Add file="../libz.so.1.3.0" install="/opt/lib/" component="slib"/>
       </QPG:Files>
 
       <QPG:PackageFilter>
@@ -63,7 +63,7 @@
             </QPM:ProductDescription>
 
             <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.13</QPM:ReleaseVersion>
+               <QPM:ReleaseVersion>1.3.0</QPM:ReleaseVersion>
                <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
                <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
                <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
diff --git a/compat/zlib/test/example.c b/compat/zlib/test/example.c
index 1470bc8..582a17a 100644
--- a/compat/zlib/test/example.c
+++ b/compat/zlib/test/example.c
@@ -34,37 +34,14 @@ static z_const char hello[] = "hello, hello!";
 static const char dictionary[] = "hello";
 static uLong dictId;    /* Adler32 value of the dictionary */
 
-void test_deflate       OF((Byte *compr, uLong comprLen));
-void test_inflate       OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_large_deflate OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_large_inflate OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_flush         OF((Byte *compr, uLong *comprLen));
-void test_sync          OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_dict_deflate  OF((Byte *compr, uLong comprLen));
-void test_dict_inflate  OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-int  main               OF((int argc, char *argv[]));
-
-
 #ifdef Z_SOLO
 
-void *myalloc OF((void *, unsigned, unsigned));
-void myfree OF((void *, void *));
-
-void *myalloc(q, n, m)
-    void *q;
-    unsigned n, m;
-{
+void *myalloc(void *q, unsigned n, unsigned m) {
     (void)q;
     return calloc(n, m);
 }
 
-void myfree(void *q, void *p)
-{
+void myfree(void *q, void *p) {
     (void)q;
     free(p);
 }
@@ -77,18 +54,11 @@ static free_func zfree = myfree;
 static alloc_func zalloc = (alloc_func)0;
 static free_func zfree = (free_func)0;
 
-void test_compress      OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_gzio          OF((const char *fname,
-                            Byte *uncompr, uLong uncomprLen));
-
 /* ===========================================================================
  * Test compress() and uncompress()
  */
-void test_compress(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
+void test_compress(Byte *compr, uLong comprLen, Byte *uncompr,
+                   uLong uncomprLen) {
     int err;
     uLong len = (uLong)strlen(hello)+1;
 
@@ -111,11 +81,7 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
 /* ===========================================================================
  * Test read/write of .gz files
  */
-void test_gzio(fname, uncompr, uncomprLen)
-    const char *fname; /* compressed file name */
-    Byte *uncompr;
-    uLong uncomprLen;
-{
+void test_gzio(const char *fname, Byte *uncompr, uLong uncomprLen) {
 #ifdef NO_GZCOMPRESS
     fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
 #else
@@ -197,10 +163,7 @@ void test_gzio(fname, uncompr, uncomprLen)
 /* ===========================================================================
  * Test deflate() with small buffers
  */
-void test_deflate(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
+void test_deflate(Byte *compr, uLong comprLen) {
     z_stream c_stream; /* compression stream */
     int err;
     uLong len = (uLong)strlen(hello)+1;
@@ -235,10 +198,8 @@ void test_deflate(compr, comprLen)
 /* ===========================================================================
  * Test inflate() with small buffers
  */
-void test_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
+void test_inflate(Byte *compr, uLong comprLen, Byte *uncompr,
+                  uLong uncomprLen) {
     int err;
     z_stream d_stream; /* decompression stream */
 
@@ -276,10 +237,8 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
 /* ===========================================================================
  * Test deflate() with large buffers and dynamic change of compression level
  */
-void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
+void test_large_deflate(Byte *compr, uLong comprLen, Byte *uncompr,
+                        uLong uncomprLen) {
     z_stream c_stream; /* compression stream */
     int err;
 
@@ -308,7 +267,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     /* Feed in already compressed data and switch to no compression: */
     deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
     c_stream.next_in = compr;
-    c_stream.avail_in = (uInt)comprLen/2;
+    c_stream.avail_in = (uInt)uncomprLen/2;
     err = deflate(&c_stream, Z_NO_FLUSH);
     CHECK_ERR(err, "deflate");
 
@@ -331,10 +290,8 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
 /* ===========================================================================
  * Test inflate() with large buffers
  */
-void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
+void test_large_inflate(Byte *compr, uLong comprLen, Byte *uncompr,
+                        uLong uncomprLen) {
     int err;
     z_stream d_stream; /* decompression stream */
 
@@ -361,7 +318,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
     err = inflateEnd(&d_stream);
     CHECK_ERR(err, "inflateEnd");
 
-    if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
+    if (d_stream.total_out != 2*uncomprLen + uncomprLen/2) {
         fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
         exit(1);
     } else {
@@ -372,10 +329,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
 /* ===========================================================================
  * Test deflate() with full flush
  */
-void test_flush(compr, comprLen)
-    Byte *compr;
-    uLong *comprLen;
-{
+void test_flush(Byte *compr, uLong *comprLen) {
     z_stream c_stream; /* compression stream */
     int err;
     uInt len = (uInt)strlen(hello)+1;
@@ -410,10 +364,7 @@ void test_flush(compr, comprLen)
 /* ===========================================================================
  * Test inflateSync()
  */
-void test_sync(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
+void test_sync(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen) {
     int err;
     z_stream d_stream; /* decompression stream */
 
@@ -453,10 +404,7 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
 /* ===========================================================================
  * Test deflate() with preset dictionary
  */
-void test_dict_deflate(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
+void test_dict_deflate(Byte *compr, uLong comprLen) {
     z_stream c_stream; /* compression stream */
     int err;
 
@@ -490,10 +438,8 @@ void test_dict_deflate(compr, comprLen)
 /* ===========================================================================
  * Test inflate() with a preset dictionary
  */
-void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
+void test_dict_inflate(Byte *compr, uLong comprLen, Byte *uncompr,
+                       uLong uncomprLen) {
     int err;
     z_stream d_stream; /* decompression stream */
 
@@ -541,13 +487,10 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
  * Usage:  example [output.gz  [input.gz]]
  */
 
-int main(argc, argv)
-    int argc;
-    char *argv[];
-{
+int main(int argc, char *argv[]) {
     Byte *compr, *uncompr;
-    uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
-    uLong uncomprLen = comprLen;
+    uLong uncomprLen = 20000;
+    uLong comprLen = 3 * uncomprLen;
     static const char* myVersion = ZLIB_VERSION;
 
     if (zlibVersion()[0] != myVersion[0]) {
@@ -590,7 +533,7 @@ int main(argc, argv)
 
     test_flush(compr, &comprLen);
     test_sync(compr, comprLen, uncompr, uncomprLen);
-    comprLen = uncomprLen;
+    comprLen = 3 * uncomprLen;
 
     test_dict_deflate(compr, comprLen);
     test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
diff --git a/compat/zlib/test/infcover.c b/compat/zlib/test/infcover.c
index 2be0164..8912c40 100644
--- a/compat/zlib/test/infcover.c
+++ b/compat/zlib/test/infcover.c
@@ -373,7 +373,7 @@ local void cover_support(void)
     mem_setup(&strm);
     strm.avail_in = 0;
     strm.next_in = Z_NULL;
-    ret = inflateInit_(&strm, ZLIB_VERSION - 1, (int)sizeof(z_stream));
+    ret = inflateInit_(&strm, "!", (int)sizeof(z_stream));
                                                 assert(ret == Z_VERSION_ERROR);
     mem_done(&strm, "wrong version");
 
@@ -462,7 +462,8 @@ local unsigned pull(void *desc, unsigned char **buf)
 
 local int push(void *desc, unsigned char *buf, unsigned len)
 {
-    buf += len;
+    (void)buf;
+    (void)len;
     return desc != Z_NULL;      /* force error if desc not null */
 }
 
diff --git a/compat/zlib/test/minigzip.c b/compat/zlib/test/minigzip.c
index a649d2b..8a21ddf 100644
--- a/compat/zlib/test/minigzip.c
+++ b/compat/zlib/test/minigzip.c
@@ -59,7 +59,7 @@
 
 #if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
 #ifndef WIN32 /* unlink already in stdio.h for WIN32 */
-  extern int unlink OF((const char *));
+  extern int unlink(const char *);
 #endif
 #endif
 
@@ -149,20 +149,12 @@ static void pwinerror (s)
 #  include <unistd.h>       /* for unlink() */
 #endif
 
-void *myalloc OF((void *, unsigned, unsigned));
-void myfree OF((void *, void *));
-
-void *myalloc(q, n, m)
-    void *q;
-    unsigned n, m;
-{
+void *myalloc(void *q, unsigned n, unsigned m) {
     (void)q;
     return calloc(n, m);
 }
 
-void myfree(q, p)
-    void *q, *p;
-{
+void myfree(void *q, void *p) {
     (void)q;
     free(p);
 }
@@ -175,29 +167,7 @@ typedef struct gzFile_s {
     z_stream strm;
 } *gzFile;
 
-gzFile gzopen OF((const char *, const char *));
-gzFile gzdopen OF((int, const char *));
-gzFile gz_open OF((const char *, int, const char *));
-
-gzFile gzopen(path, mode)
-const char *path;
-const char *mode;
-{
-    return gz_open(path, -1, mode);
-}
-
-gzFile gzdopen(fd, mode)
-int fd;
-const char *mode;
-{
-    return gz_open(NULL, fd, mode);
-}
-
-gzFile gz_open(path, fd, mode)
-    const char *path;
-    int fd;
-    const char *mode;
-{
+gzFile gz_open(const char *path, int fd, const char *mode) {
     gzFile gz;
     int ret;
 
@@ -231,13 +201,15 @@ gzFile gz_open(path, fd, mode)
     return gz;
 }
 
-int gzwrite OF((gzFile, const void *, unsigned));
+gzFile gzopen(const char *path, const char *mode) {
+    return gz_open(path, -1, mode);
+}
 
-int gzwrite(gz, buf, len)
-    gzFile gz;
-    const void *buf;
-    unsigned len;
-{
+gzFile gzdopen(int fd, const char *mode) {
+    return gz_open(NULL, fd, mode);
+}
+
+int gzwrite(gzFile gz, const void *buf, unsigned len) {
     z_stream *strm;
     unsigned char out[BUFLEN];
 
@@ -255,13 +227,7 @@ int gzwrite(gz, buf, len)
     return len;
 }
 
-int gzread OF((gzFile, void *, unsigned));
-
-int gzread(gz, buf, len)
-    gzFile gz;
-    void *buf;
-    unsigned len;
-{
+int gzread(gzFile gz, void *buf, unsigned len) {
     int ret;
     unsigned got;
     unsigned char in[1];
@@ -292,11 +258,7 @@ int gzread(gz, buf, len)
     return len - strm->avail_out;
 }
 
-int gzclose OF((gzFile));
-
-int gzclose(gz)
-    gzFile gz;
-{
+int gzclose(gzFile gz) {
     z_stream *strm;
     unsigned char out[BUFLEN];
 
@@ -321,12 +283,7 @@ int gzclose(gz)
     return Z_OK;
 }
 
-const char *gzerror OF((gzFile, int *));
-
-const char *gzerror(gz, err)
-    gzFile gz;
-    int *err;
-{
+const char *gzerror(gzFile gz, int *err) {
     *err = gz->err;
     return gz->msg;
 }
@@ -335,67 +292,20 @@ const char *gzerror(gz, err)
 
 static char *prog;
 
-void error            OF((const char *msg));
-void gz_compress      OF((FILE   *in, gzFile out));
-#ifdef USE_MMAP
-int  gz_compress_mmap OF((FILE   *in, gzFile out));
-#endif
-void gz_uncompress    OF((gzFile in, FILE   *out));
-void file_compress    OF((char  *file, char *mode));
-void file_uncompress  OF((char  *file));
-int  main             OF((int argc, char *argv[]));
-
 /* ===========================================================================
  * Display error message and exit
  */
-void error(msg)
-    const char *msg;
-{
+void error(const char *msg) {
     fprintf(stderr, "%s: %s\n", prog, msg);
     exit(1);
 }
 
-/* ===========================================================================
- * Compress input to output then close both files.
- */
-
-void gz_compress(in, out)
-    FILE   *in;
-    gzFile out;
-{
-    local char buf[BUFLEN];
-    int len;
-    int err;
-
-#ifdef USE_MMAP
-    /* Try first compressing with mmap. If mmap fails (minigzip used in a
-     * pipe), use the normal fread loop.
-     */
-    if (gz_compress_mmap(in, out) == Z_OK) return;
-#endif
-    for (;;) {
-        len = (int)fread(buf, 1, sizeof(buf), in);
-        if (ferror(in)) {
-            perror("fread");
-            exit(1);
-        }
-        if (len == 0) break;
-
-        if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
-    }
-    fclose(in);
-    if (gzclose(out) != Z_OK) error("failed gzclose");
-}
-
 #ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
 
 /* Try compressing the input file at once using mmap. Return Z_OK if
  * if success, Z_ERRNO otherwise.
  */
-int gz_compress_mmap(in, out)
-    FILE   *in;
-    gzFile out;
-{
+int gz_compress_mmap(FILE *in, gzFile out) {
     int len;
     int err;
     int ifd = fileno(in);
@@ -425,12 +335,38 @@ int gz_compress_mmap(in, out)
 #endif /* USE_MMAP */
 
 /* ===========================================================================
+ * Compress input to output then close both files.
+ */
+
+void gz_compress(FILE *in, gzFile out) {
+    local char buf[BUFLEN];
+    int len;
+    int err;
+
+#ifdef USE_MMAP
+    /* Try first compressing with mmap. If mmap fails (minigzip used in a
+     * pipe), use the normal fread loop.
+     */
+    if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
+    for (;;) {
+        len = (int)fread(buf, 1, sizeof(buf), in);
+        if (ferror(in)) {
+            perror("fread");
+            exit(1);
+        }
+        if (len == 0) break;
+
+        if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
+    }
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+}
+
+/* ===========================================================================
  * Uncompress input to output then close both files.
  */
-void gz_uncompress(in, out)
-    gzFile in;
-    FILE   *out;
-{
+void gz_uncompress(gzFile in, FILE *out) {
     local char buf[BUFLEN];
     int len;
     int err;
@@ -454,10 +390,7 @@ void gz_uncompress(in, out)
  * Compress the given file: create a corresponding .gz file and remove the
  * original.
  */
-void file_compress(file, mode)
-    char  *file;
-    char  *mode;
-{
+void file_compress(char *file, char *mode) {
     local char outfile[MAX_NAME_LEN];
     FILE  *in;
     gzFile out;
@@ -493,9 +426,7 @@ void file_compress(file, mode)
 /* ===========================================================================
  * Uncompress the given file and remove the original.
  */
-void file_uncompress(file)
-    char  *file;
-{
+void file_uncompress(char *file) {
     local char buf[MAX_NAME_LEN];
     char *infile, *outfile;
     FILE  *out;
@@ -553,10 +484,7 @@ void file_uncompress(file)
  *   -1 to -9 : compression level
  */
 
-int main(argc, argv)
-    int argc;
-    char *argv[];
-{
+int main(int argc, char *argv[]) {
     int copyout = 0;
     int uncompr = 0;
     gzFile file;
diff --git a/compat/zlib/treebuild.xml b/compat/zlib/treebuild.xml
index 0017a45..1d1b007 100644
--- a/compat/zlib/treebuild.xml
+++ b/compat/zlib/treebuild.xml
@@ -1,6 +1,6 @@
 <?xml version="1.0" ?>
-<package name="zlib" version="1.2.13">
-    <library name="zlib" dlversion="1.2.13" dlname="z">
+<package name="zlib" version="1.3">
+    <library name="zlib" dlversion="1.3" dlname="z">
 	<property name="description"> zip compression library </property>
 	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
 
diff --git a/compat/zlib/trees.c b/compat/zlib/trees.c
index 5f305c4..8dbdc40 100644
--- a/compat/zlib/trees.c
+++ b/compat/zlib/trees.c
@@ -122,39 +122,116 @@ struct static_tree_desc_s {
     int     max_length;          /* max bit length for the codes */
 };
 
-local const static_tree_desc  static_l_desc =
+#ifdef NO_INIT_GLOBAL_POINTERS
+#  define TCONST
+#else
+#  define TCONST const
+#endif
+
+local TCONST static_tree_desc static_l_desc =
 {static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
 
-local const static_tree_desc  static_d_desc =
+local TCONST static_tree_desc static_d_desc =
 {static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
 
-local const static_tree_desc  static_bl_desc =
+local TCONST static_tree_desc static_bl_desc =
 {(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
 
 /* ===========================================================================
- * Local (static) routines in this file.
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+#define put_short(s, w) { \
+    put_byte(s, (uch)((w) & 0xff)); \
+    put_byte(s, (uch)((ush)(w) >> 8)); \
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
  */
+local unsigned bi_reverse(unsigned code, int len) {
+    register unsigned res = 0;
+    do {
+        res |= code & 1;
+        code >>= 1, res <<= 1;
+    } while (--len > 0);
+    return res >> 1;
+}
 
-local void tr_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, const ct_data *ltree,
-                              const ct_data *dtree));
-local int  detect_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned code, int len));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+local void bi_flush(deflate_state *s) {
+    if (s->bi_valid == 16) {
+        put_short(s, s->bi_buf);
+        s->bi_buf = 0;
+        s->bi_valid = 0;
+    } else if (s->bi_valid >= 8) {
+        put_byte(s, (Byte)s->bi_buf);
+        s->bi_buf >>= 8;
+        s->bi_valid -= 8;
+    }
+}
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+local void bi_windup(deflate_state *s) {
+    if (s->bi_valid > 8) {
+        put_short(s, s->bi_buf);
+    } else if (s->bi_valid > 0) {
+        put_byte(s, (Byte)s->bi_buf);
+    }
+    s->bi_buf = 0;
+    s->bi_valid = 0;
+#ifdef ZLIB_DEBUG
+    s->bits_sent = (s->bits_sent + 7) & ~7;
+#endif
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ *     zero code length.
+ */
+local void gen_codes(ct_data *tree, int max_code, ushf *bl_count) {
+    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+    unsigned code = 0;         /* running code value */
+    int bits;                  /* bit index */
+    int n;                     /* code index */
+
+    /* The distribution counts are first used to generate the code values
+     * without bit reversal.
+     */
+    for (bits = 1; bits <= MAX_BITS; bits++) {
+        code = (code + bl_count[bits - 1]) << 1;
+        next_code[bits] = (ush)code;
+    }
+    /* Check that the bit counts in bl_count are consistent. The last code
+     * must be all ones.
+     */
+    Assert (code + bl_count[MAX_BITS] - 1 == (1 << MAX_BITS) - 1,
+            "inconsistent bit counts");
+    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+    for (n = 0;  n <= max_code; n++) {
+        int len = tree[n].Len;
+        if (len == 0) continue;
+        /* Now reverse the bits */
+        tree[n].Code = (ush)bi_reverse(next_code[len]++, len);
+
+        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
+            n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len] - 1));
+    }
+}
 
 #ifdef GEN_TREES_H
-local void gen_trees_header OF((void));
+local void gen_trees_header(void);
 #endif
 
 #ifndef ZLIB_DEBUG
@@ -168,26 +245,11 @@ local void gen_trees_header OF((void));
 #endif
 
 /* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
  * Send a value on a given number of bits.
  * IN assertion: length <= 16 and value fits in length bits.
  */
 #ifdef ZLIB_DEBUG
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
+local void send_bits(deflate_state *s, int value, int length) {
     Tracevv((stderr," l %2d v %4x ", length, value));
     Assert(length > 0 && length <= 15, "invalid length");
     s->bits_sent += (ulg)length;
@@ -229,8 +291,7 @@ local void send_bits(s, value, length)
 /* ===========================================================================
  * Initialize the various 'constant' tables.
  */
-local void tr_static_init()
-{
+local void tr_static_init(void) {
 #if defined(GEN_TREES_H) || !defined(STDC)
     static int static_init_done = 0;
     int n;        /* iterates over tree elements */
@@ -323,8 +384,7 @@ local void tr_static_init()
       ((i) == (last)? "\n};\n\n" :    \
        ((i) % (width) == (width) - 1 ? ",\n" : ", "))
 
-void gen_trees_header()
-{
+void gen_trees_header(void) {
     FILE *header = fopen("trees.h", "w");
     int i;
 
@@ -374,11 +434,25 @@ void gen_trees_header()
 #endif /* GEN_TREES_H */
 
 /* ===========================================================================
+ * Initialize a new block.
+ */
+local void init_block(deflate_state *s) {
+    int n; /* iterates over tree elements */
+
+    /* Initialize the trees. */
+    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
+    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
+    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
+
+    s->dyn_ltree[END_BLOCK].Freq = 1;
+    s->opt_len = s->static_len = 0L;
+    s->sym_next = s->matches = 0;
+}
+
+/* ===========================================================================
  * Initialize the tree data structures for a new zlib stream.
  */
-void ZLIB_INTERNAL _tr_init(s)
-    deflate_state *s;
-{
+void ZLIB_INTERNAL _tr_init(deflate_state *s) {
     tr_static_init();
 
     s->l_desc.dyn_tree = s->dyn_ltree;
@@ -401,24 +475,6 @@ void ZLIB_INTERNAL _tr_init(s)
     init_block(s);
 }
 
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->sym_next = s->matches = 0;
-}
-
 #define SMALLEST 1
 /* Index within the heap array of least frequent node in the Huffman tree */
 
@@ -448,11 +504,7 @@ local void init_block(s)
  * when the heap property is re-established (each father smaller than its
  * two sons).
  */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
+local void pqdownheap(deflate_state *s, ct_data *tree, int k) {
     int v = s->heap[k];
     int j = k << 1;  /* left son of k */
     while (j <= s->heap_len) {
@@ -483,10 +535,7 @@ local void pqdownheap(s, tree, k)
  *     The length opt_len is updated; static_len is also updated if stree is
  *     not null.
  */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
+local void gen_bitlen(deflate_state *s, tree_desc *desc) {
     ct_data *tree        = desc->dyn_tree;
     int max_code         = desc->max_code;
     const ct_data *stree = desc->stat_desc->static_tree;
@@ -561,48 +610,9 @@ local void gen_bitlen(s, desc)
     }
 }
 
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes(tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    unsigned code = 0;         /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        code = (code + bl_count[bits - 1]) << 1;
-        next_code[bits] = (ush)code;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS] - 1 == (1 << MAX_BITS) - 1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = (ush)bi_reverse(next_code[len]++, len);
-
-        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-            n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len] - 1));
-    }
-}
+#ifdef DUMP_BL_TREE
+#  include <stdio.h>
+#endif
 
 /* ===========================================================================
  * Construct one Huffman tree and assigns the code bit strings and lengths.
@@ -612,10 +622,7 @@ local void gen_codes(tree, max_code, bl_count)
  *     and corresponding code. The length opt_len is updated; static_len is
  *     also updated if stree is not null. The field max_code is set.
  */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
+local void build_tree(deflate_state *s, tree_desc *desc) {
     ct_data *tree         = desc->dyn_tree;
     const ct_data *stree  = desc->stat_desc->static_tree;
     int elems             = desc->stat_desc->elems;
@@ -700,11 +707,7 @@ local void build_tree(s, desc)
  * Scan a literal or distance tree to determine the frequencies of the codes
  * in the bit length tree.
  */
-local void scan_tree(s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
+local void scan_tree(deflate_state *s, ct_data *tree, int max_code) {
     int n;                     /* iterates over all tree elements */
     int prevlen = -1;          /* last emitted length */
     int curlen;                /* length of current code */
@@ -745,11 +748,7 @@ local void scan_tree(s, tree, max_code)
  * Send a literal or distance tree in compressed form, using the codes in
  * bl_tree.
  */
-local void send_tree(s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
+local void send_tree(deflate_state *s, ct_data *tree, int max_code) {
     int n;                     /* iterates over all tree elements */
     int prevlen = -1;          /* last emitted length */
     int curlen;                /* length of current code */
@@ -796,9 +795,7 @@ local void send_tree(s, tree, max_code)
  * Construct the Huffman tree for the bit lengths and return the index in
  * bl_order of the last bit length code to send.
  */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
+local int build_bl_tree(deflate_state *s) {
     int max_blindex;  /* index of last bit length code of non zero freq */
 
     /* Determine the bit length frequencies for literal and distance trees */
@@ -831,10 +828,8 @@ local int build_bl_tree(s)
  * lengths of the bit length codes, the literal tree and the distance tree.
  * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
  */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
+local void send_all_trees(deflate_state *s, int lcodes, int dcodes,
+                          int blcodes) {
     int rank;                    /* index in bl_order */
 
     Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
@@ -860,12 +855,8 @@ local void send_all_trees(s, lcodes, dcodes, blcodes)
 /* ===========================================================================
  * Send a stored block
  */
-void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int last;         /* one if this is the last block for a file */
-{
+void ZLIB_INTERNAL _tr_stored_block(deflate_state *s, charf *buf,
+                                    ulg stored_len, int last) {
     send_bits(s, (STORED_BLOCK<<1) + last, 3);  /* send block type */
     bi_windup(s);        /* align on byte boundary */
     put_short(s, (ush)stored_len);
@@ -884,9 +875,7 @@ void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
 /* ===========================================================================
  * Flush the bits in the bit buffer to pending output (leaves at most 7 bits)
  */
-void ZLIB_INTERNAL _tr_flush_bits(s)
-    deflate_state *s;
-{
+void ZLIB_INTERNAL _tr_flush_bits(deflate_state *s) {
     bi_flush(s);
 }
 
@@ -894,9 +883,7 @@ void ZLIB_INTERNAL _tr_flush_bits(s)
  * Send one empty static block to give enough lookahead for inflate.
  * This takes 10 bits, of which 7 may remain in the bit buffer.
  */
-void ZLIB_INTERNAL _tr_align(s)
-    deflate_state *s;
-{
+void ZLIB_INTERNAL _tr_align(deflate_state *s) {
     send_bits(s, STATIC_TREES<<1, 3);
     send_code(s, END_BLOCK, static_ltree);
 #ifdef ZLIB_DEBUG
@@ -906,15 +893,98 @@ void ZLIB_INTERNAL _tr_align(s)
 }
 
 /* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+local void compress_block(deflate_state *s, const ct_data *ltree,
+                          const ct_data *dtree) {
+    unsigned dist;      /* distance of matched string */
+    int lc;             /* match length or unmatched char (if dist == 0) */
+    unsigned sx = 0;    /* running index in sym_buf */
+    unsigned code;      /* the code to send */
+    int extra;          /* number of extra bits to send */
+
+    if (s->sym_next != 0) do {
+        dist = s->sym_buf[sx++] & 0xff;
+        dist += (unsigned)(s->sym_buf[sx++] & 0xff) << 8;
+        lc = s->sym_buf[sx++];
+        if (dist == 0) {
+            send_code(s, lc, ltree); /* send a literal byte */
+            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
+        } else {
+            /* Here, lc is the match length - MIN_MATCH */
+            code = _length_code[lc];
+            send_code(s, code + LITERALS + 1, ltree);   /* send length code */
+            extra = extra_lbits[code];
+            if (extra != 0) {
+                lc -= base_length[code];
+                send_bits(s, lc, extra);       /* send the extra length bits */
+            }
+            dist--; /* dist is now the match distance - 1 */
+            code = d_code(dist);
+            Assert (code < D_CODES, "bad d_code");
+
+            send_code(s, code, dtree);       /* send the distance code */
+            extra = extra_dbits[code];
+            if (extra != 0) {
+                dist -= (unsigned)base_dist[code];
+                send_bits(s, dist, extra);   /* send the extra distance bits */
+            }
+        } /* literal or match pair ? */
+
+        /* Check that the overlay between pending_buf and sym_buf is ok: */
+        Assert(s->pending < s->lit_bufsize + sx, "pendingBuf overflow");
+
+    } while (sx < s->sym_next);
+
+    send_code(s, END_BLOCK, ltree);
+}
+
+/* ===========================================================================
+ * Check if the data type is TEXT or BINARY, using the following algorithm:
+ * - TEXT if the two conditions below are satisfied:
+ *    a) There are no non-portable control characters belonging to the
+ *       "block list" (0..6, 14..25, 28..31).
+ *    b) There is at least one printable character belonging to the
+ *       "allow list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
+ * - BINARY otherwise.
+ * - The following partially-portable control characters form a
+ *   "gray list" that is ignored in this detection algorithm:
+ *   (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
+ * IN assertion: the fields Freq of dyn_ltree are set.
+ */
+local int detect_data_type(deflate_state *s) {
+    /* block_mask is the bit mask of block-listed bytes
+     * set bits 0..6, 14..25, and 28..31
+     * 0xf3ffc07f = binary 11110011111111111100000001111111
+     */
+    unsigned long block_mask = 0xf3ffc07fUL;
+    int n;
+
+    /* Check for non-textual ("block-listed") bytes. */
+    for (n = 0; n <= 31; n++, block_mask >>= 1)
+        if ((block_mask & 1) && (s->dyn_ltree[n].Freq != 0))
+            return Z_BINARY;
+
+    /* Check for textual ("allow-listed") bytes. */
+    if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
+            || s->dyn_ltree[13].Freq != 0)
+        return Z_TEXT;
+    for (n = 32; n < LITERALS; n++)
+        if (s->dyn_ltree[n].Freq != 0)
+            return Z_TEXT;
+
+    /* There are no "block-listed" or "allow-listed" bytes:
+     * this stream either is empty or has tolerated ("gray-listed") bytes only.
+     */
+    return Z_BINARY;
+}
+
+/* ===========================================================================
  * Determine the best encoding for the current block: dynamic trees, static
  * trees or store, and write out the encoded block.
  */
-void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int last;         /* one if this is the last block for a file */
-{
+void ZLIB_INTERNAL _tr_flush_block(deflate_state *s, charf *buf,
+                                   ulg stored_len, int last) {
     ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
     int max_blindex = 0;  /* index of last bit length code of non zero freq */
 
@@ -1011,11 +1081,7 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
  * Save the match info and tally the frequency counts. Return true if
  * the current block must be flushed.
  */
-int ZLIB_INTERNAL _tr_tally(s, dist, lc)
-    deflate_state *s;
-    unsigned dist;  /* distance of matched string */
-    unsigned lc;    /* match length - MIN_MATCH or unmatched char (dist==0) */
-{
+int ZLIB_INTERNAL _tr_tally(deflate_state *s, unsigned dist, unsigned lc) {
     s->sym_buf[s->sym_next++] = (uch)dist;
     s->sym_buf[s->sym_next++] = (uch)(dist >> 8);
     s->sym_buf[s->sym_next++] = (uch)lc;
@@ -1035,147 +1101,3 @@ int ZLIB_INTERNAL _tr_tally(s, dist, lc)
     }
     return (s->sym_next == s->sym_end);
 }
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    const ct_data *ltree; /* literal tree */
-    const ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned sx = 0;    /* running index in sym_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->sym_next != 0) do {
-        dist = s->sym_buf[sx++] & 0xff;
-        dist += (unsigned)(s->sym_buf[sx++] & 0xff) << 8;
-        lc = s->sym_buf[sx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = _length_code[lc];
-            send_code(s, code + LITERALS + 1, ltree);   /* send length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= (unsigned)base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and sym_buf is ok: */
-        Assert(s->pending < s->lit_bufsize + sx, "pendingBuf overflow");
-
-    } while (sx < s->sym_next);
-
-    send_code(s, END_BLOCK, ltree);
-}
-
-/* ===========================================================================
- * Check if the data type is TEXT or BINARY, using the following algorithm:
- * - TEXT if the two conditions below are satisfied:
- *    a) There are no non-portable control characters belonging to the
- *       "block list" (0..6, 14..25, 28..31).
- *    b) There is at least one printable character belonging to the
- *       "allow list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
- * - BINARY otherwise.
- * - The following partially-portable control characters form a
- *   "gray list" that is ignored in this detection algorithm:
- *   (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
- * IN assertion: the fields Freq of dyn_ltree are set.
- */
-local int detect_data_type(s)
-    deflate_state *s;
-{
-    /* block_mask is the bit mask of block-listed bytes
-     * set bits 0..6, 14..25, and 28..31
-     * 0xf3ffc07f = binary 11110011111111111100000001111111
-     */
-    unsigned long block_mask = 0xf3ffc07fUL;
-    int n;
-
-    /* Check for non-textual ("block-listed") bytes. */
-    for (n = 0; n <= 31; n++, block_mask >>= 1)
-        if ((block_mask & 1) && (s->dyn_ltree[n].Freq != 0))
-            return Z_BINARY;
-
-    /* Check for textual ("allow-listed") bytes. */
-    if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
-            || s->dyn_ltree[13].Freq != 0)
-        return Z_TEXT;
-    for (n = 32; n < LITERALS; n++)
-        if (s->dyn_ltree[n].Freq != 0)
-            return Z_TEXT;
-
-    /* There are no "block-listed" or "allow-listed" bytes:
-     * this stream either is empty or has tolerated ("gray-listed") bytes only.
-     */
-    return Z_BINARY;
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
-    unsigned code; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= code & 1;
-        code >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef ZLIB_DEBUG
-    s->bits_sent = (s->bits_sent + 7) & ~7;
-#endif
-}
diff --git a/compat/zlib/uncompr.c b/compat/zlib/uncompr.c
index f9532f4..5e25666 100644
--- a/compat/zlib/uncompr.c
+++ b/compat/zlib/uncompr.c
@@ -24,12 +24,8 @@
    Z_DATA_ERROR if the input data was corrupted, including if the input data is
    an incomplete zlib stream.
 */
-int ZEXPORT uncompress2(dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong *sourceLen;
-{
+int ZEXPORT uncompress2(Bytef *dest, uLongf *destLen, const Bytef *source,
+                        uLong *sourceLen) {
     z_stream stream;
     int err;
     const uInt max = (uInt)-1;
@@ -83,11 +79,7 @@ int ZEXPORT uncompress2(dest, destLen, source, sourceLen)
            err;
 }
 
-int ZEXPORT uncompress(dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
+int ZEXPORT uncompress(Bytef *dest, uLongf *destLen, const Bytef *source,
+                       uLong sourceLen) {
     return uncompress2(dest, destLen, source, &sourceLen);
 }
diff --git a/compat/zlib/win32/README-WIN32.txt b/compat/zlib/win32/README-WIN32.txt
index 050197d..384c988 100644
--- a/compat/zlib/win32/README-WIN32.txt
+++ b/compat/zlib/win32/README-WIN32.txt
@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.13 is a general purpose data compression library.  All the code is
+zlib 1.3.0 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -22,7 +22,7 @@ before asking for help.
 
 Manifest:
 
-The package zlib-1.2.13-win32-x86.zip will contain the following files:
+The package zlib-1.3.0-win32-x86.zip will contain the following files:
 
   README-WIN32.txt This document
   ChangeLog        Changes since previous zlib packages
diff --git a/compat/zlib/win32/README.txt b/compat/zlib/win32/README.txt
index bd3d18d..55449b8 100644
--- a/compat/zlib/win32/README.txt
+++ b/compat/zlib/win32/README.txt
@@ -6,7 +6,7 @@ What's here
 

 Source

 ======

-  zlib version 1.2.11

+  zlib version 1.3.0

   available at http://www.gzip.org/zlib/

 

 

diff --git a/compat/zlib/win32/zlib1.dll b/compat/zlib/win32/zlib1.dll
index 8a24ded..0ea471e 100755
--- a/compat/zlib/win32/zlib1.dll
+++ b/compat/zlib/win32/zlib1.dll
diff --git a/compat/zlib/win64-arm/zlib1.dll b/compat/zlib/win64-arm/zlib1.dll
index 32d70b4..ddd6209 100755
--- a/compat/zlib/win64-arm/zlib1.dll
+++ b/compat/zlib/win64-arm/zlib1.dll
diff --git a/compat/zlib/win64/zlib1.dll b/compat/zlib/win64/zlib1.dll
index 35ed527..d25d995 100755
--- a/compat/zlib/win64/zlib1.dll
+++ b/compat/zlib/win64/zlib1.dll
diff --git a/compat/zlib/zconf.h b/compat/zlib/zconf.h
index bf977d3..fb76ffe 100644
--- a/compat/zlib/zconf.h
+++ b/compat/zlib/zconf.h
@@ -241,7 +241,11 @@
 #endif
 
 #ifdef Z_SOLO
-   typedef unsigned long z_size_t;
+#  ifdef _WIN64
+     typedef unsigned long long z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
 #else
 #  define z_longlong long long
 #  if defined(NO_SIZE_T)
@@ -520,7 +524,7 @@ typedef uLong FAR uLongf;
 #if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#  if defined(_WIN32) && !defined(__GNUC__)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t
diff --git a/compat/zlib/zconf.h.cmakein b/compat/zlib/zconf.h.cmakein
index 247ba24..310c439 100644
--- a/compat/zlib/zconf.h.cmakein
+++ b/compat/zlib/zconf.h.cmakein
@@ -243,7 +243,11 @@
 #endif
 
 #ifdef Z_SOLO
-   typedef unsigned long z_size_t;
+#  ifdef _WIN64
+     typedef unsigned long long z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
 #else
 #  define z_longlong long long
 #  if defined(NO_SIZE_T)
@@ -522,7 +526,7 @@ typedef uLong FAR uLongf;
 #if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#  if defined(_WIN32) && !defined(__GNUC__)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t
diff --git a/compat/zlib/zconf.h.in b/compat/zlib/zconf.h.in
index bf977d3..fb76ffe 100644
--- a/compat/zlib/zconf.h.in
+++ b/compat/zlib/zconf.h.in
@@ -241,7 +241,11 @@
 #endif
 
 #ifdef Z_SOLO
-   typedef unsigned long z_size_t;
+#  ifdef _WIN64
+     typedef unsigned long long z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
 #else
 #  define z_longlong long long
 #  if defined(NO_SIZE_T)
@@ -520,7 +524,7 @@ typedef uLong FAR uLongf;
 #if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#  if defined(_WIN32) && !defined(__GNUC__)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t
diff --git a/compat/zlib/zlib.3 b/compat/zlib/zlib.3
index 6f6e914..4dd2896 100644
--- a/compat/zlib/zlib.3
+++ b/compat/zlib/zlib.3
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "13 Oct 2022"
+.TH ZLIB 3 "18 Aug 2023"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -105,9 +105,9 @@ before asking for help.
 Send questions and/or comments to zlib@gzip.org,
 or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
 .SH AUTHORS AND LICENSE
-Version 1.2.13
+Version 1.3
 .LP
-Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+Copyright (C) 1995-2023 Jean-loup Gailly and Mark Adler
 .LP
 This software is provided 'as-is', without any express or implied
 warranty.  In no event will the authors be held liable for any damages
diff --git a/compat/zlib/zlib.3.pdf b/compat/zlib/zlib.3.pdf
index 8132d84..da12d37 100644
--- a/compat/zlib/zlib.3.pdf
+++ b/compat/zlib/zlib.3.pdf
diff --git a/compat/zlib/zlib.h b/compat/zlib/zlib.h
index 953cb50..6b7244f 100644
--- a/compat/zlib/zlib.h
+++ b/compat/zlib/zlib.h
@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.13, October 13th, 2022
+  version 1.3, August 18th, 2023
 
-  Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2023 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -37,11 +37,11 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.13"
-#define ZLIB_VERNUM 0x12d0
+#define ZLIB_VERSION "1.3"
+#define ZLIB_VERNUM 0x1300
 #define ZLIB_VER_MAJOR 1
-#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 13
+#define ZLIB_VER_MINOR 3
+#define ZLIB_VER_REVISION 0
 #define ZLIB_VER_SUBREVISION 0
 
 /*
@@ -78,8 +78,8 @@ extern "C" {
   even in the case of corrupted input.
 */
 
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+typedef voidpf (*alloc_func)(voidpf opaque, uInt items, uInt size);
+typedef void   (*free_func)(voidpf opaque, voidpf address);
 
 struct internal_state;
 
@@ -217,7 +217,7 @@ typedef gz_header FAR *gz_headerp;
 
                         /* basic functions */
 
-ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+ZEXTERN const char * ZEXPORT zlibVersion(void);
 /* The application can compare zlibVersion and ZLIB_VERSION for consistency.
    If the first character differs, the library code actually used is not
    compatible with the zlib.h header file used by the application.  This check
@@ -225,12 +225,12 @@ ZEXTERN const char * ZEXPORT zlibVersion OF((void));
  */
 
 /*
-ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+ZEXTERN int ZEXPORT deflateInit(z_streamp strm, int level);
 
      Initializes the internal stream state for compression.  The fields
    zalloc, zfree and opaque must be initialized before by the caller.  If
    zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
-   allocation functions.
+   allocation functions.  total_in, total_out, adler, and msg are initialized.
 
      The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
    1 gives best speed, 9 gives best compression, 0 gives no compression at all
@@ -247,7 +247,7 @@ ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
 */
 
 
-ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+ZEXTERN int ZEXPORT deflate(z_streamp strm, int flush);
 /*
     deflate compresses as much data as possible, and stops when the input
   buffer becomes empty or the output buffer becomes full.  It may introduce
@@ -320,8 +320,8 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   with the same value of the flush parameter and more output space (updated
   avail_out), until the flush is complete (deflate returns with non-zero
   avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
-  avail_out is greater than six to avoid repeated flush markers due to
-  avail_out == 0 on return.
+  avail_out is greater than six when the flush marker begins, in order to avoid
+  repeated flush markers upon calling deflate() again when avail_out == 0.
 
     If the parameter flush is set to Z_FINISH, pending input is processed,
   pending output is flushed and deflate returns with Z_STREAM_END if there was
@@ -360,7 +360,7 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 */
 
 
-ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+ZEXTERN int ZEXPORT deflateEnd(z_streamp strm);
 /*
      All dynamically allocated data structures for this stream are freed.
    This function discards any unprocessed input and does not flush any pending
@@ -375,7 +375,7 @@ ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
 
 
 /*
-ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateInit(z_streamp strm);
 
      Initializes the internal stream state for decompression.  The fields
    next_in, avail_in, zalloc, zfree and opaque must be initialized before by
@@ -383,7 +383,8 @@ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
    read or consumed.  The allocation of a sliding window will be deferred to
    the first call of inflate (if the decompression does not complete on the
    first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
-   them to use default allocation functions.
+   them to use default allocation functions.  total_in, total_out, adler, and
+   msg are initialized.
 
      inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
@@ -397,7 +398,7 @@ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 */
 
 
-ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+ZEXTERN int ZEXPORT inflate(z_streamp strm, int flush);
 /*
     inflate decompresses as much data as possible, and stops when the input
   buffer becomes empty or the output buffer becomes full.  It may introduce
@@ -517,7 +518,7 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
 */
 
 
-ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateEnd(z_streamp strm);
 /*
      All dynamically allocated data structures for this stream are freed.
    This function discards any unprocessed input and does not flush any pending
@@ -535,12 +536,12 @@ ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
 */
 
 /*
-ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
-                                     int  level,
-                                     int  method,
-                                     int  windowBits,
-                                     int  memLevel,
-                                     int  strategy));
+ZEXTERN int ZEXPORT deflateInit2(z_streamp strm,
+                                 int level,
+                                 int method,
+                                 int windowBits,
+                                 int memLevel,
+                                 int strategy);
 
      This is another version of deflateInit with more compression options.  The
    fields zalloc, zfree and opaque must be initialized before by the caller.
@@ -607,9 +608,9 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
    compression: this will be done by deflate().
 */
 
-ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
-                                             const Bytef *dictionary,
-                                             uInt  dictLength));
+ZEXTERN int ZEXPORT deflateSetDictionary(z_streamp strm,
+                                         const Bytef *dictionary,
+                                         uInt  dictLength);
 /*
      Initializes the compression dictionary from the given byte sequence
    without producing any compressed output.  When using the zlib format, this
@@ -651,9 +652,9 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
    not perform any compression: this will be done by deflate().
 */
 
-ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
-                                             Bytef *dictionary,
-                                             uInt  *dictLength));
+ZEXTERN int ZEXPORT deflateGetDictionary(z_streamp strm,
+                                         Bytef *dictionary,
+                                         uInt  *dictLength);
 /*
      Returns the sliding dictionary being maintained by deflate.  dictLength is
    set to the number of bytes in the dictionary, and that many bytes are copied
@@ -673,8 +674,8 @@ ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
    stream state is inconsistent.
 */
 
-ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
-                                    z_streamp source));
+ZEXTERN int ZEXPORT deflateCopy(z_streamp dest,
+                                z_streamp source);
 /*
      Sets the destination stream as a complete copy of the source stream.
 
@@ -691,20 +692,20 @@ ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
    destination.
 */
 
-ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+ZEXTERN int ZEXPORT deflateReset(z_streamp strm);
 /*
      This function is equivalent to deflateEnd followed by deflateInit, but
    does not free and reallocate the internal compression state.  The stream
    will leave the compression level and any other attributes that may have been
-   set unchanged.
+   set unchanged.  total_in, total_out, adler, and msg are initialized.
 
      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent (such as zalloc or state being Z_NULL).
 */
 
-ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
-                                      int level,
-                                      int strategy));
+ZEXTERN int ZEXPORT deflateParams(z_streamp strm,
+                                  int level,
+                                  int strategy);
 /*
      Dynamically update the compression level and compression strategy.  The
    interpretation of level and strategy is as in deflateInit2().  This can be
@@ -729,7 +730,7 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
    Then no more input data should be provided before the deflateParams() call.
    If this is done, the old level and strategy will be applied to the data
    compressed before deflateParams(), and the new level and strategy will be
-   applied to the the data compressed after deflateParams().
+   applied to the data compressed after deflateParams().
 
      deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
    state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
@@ -740,11 +741,11 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
    retried with more output space.
 */
 
-ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
-                                    int good_length,
-                                    int max_lazy,
-                                    int nice_length,
-                                    int max_chain));
+ZEXTERN int ZEXPORT deflateTune(z_streamp strm,
+                                int good_length,
+                                int max_lazy,
+                                int nice_length,
+                                int max_chain);
 /*
      Fine tune deflate's internal compression parameters.  This should only be
    used by someone who understands the algorithm used by zlib's deflate for
@@ -757,8 +758,8 @@ ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
    returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
  */
 
-ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
-                                       uLong sourceLen));
+ZEXTERN uLong ZEXPORT deflateBound(z_streamp strm,
+                                   uLong sourceLen);
 /*
      deflateBound() returns an upper bound on the compressed size after
    deflation of sourceLen bytes.  It must be called after deflateInit() or
@@ -772,9 +773,9 @@ ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
    than Z_FINISH or Z_NO_FLUSH are used.
 */
 
-ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
-                                       unsigned *pending,
-                                       int *bits));
+ZEXTERN int ZEXPORT deflatePending(z_streamp strm,
+                                   unsigned *pending,
+                                   int *bits);
 /*
      deflatePending() returns the number of bytes and bits of output that have
    been generated, but not yet provided in the available output.  The bytes not
@@ -787,9 +788,9 @@ ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
    stream state was inconsistent.
  */
 
-ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
-                                     int bits,
-                                     int value));
+ZEXTERN int ZEXPORT deflatePrime(z_streamp strm,
+                                 int bits,
+                                 int value);
 /*
      deflatePrime() inserts bits in the deflate output stream.  The intent
    is that this function is used to start off the deflate output with the bits
@@ -804,8 +805,8 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
    source stream state was inconsistent.
 */
 
-ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
-                                         gz_headerp head));
+ZEXTERN int ZEXPORT deflateSetHeader(z_streamp strm,
+                                     gz_headerp head);
 /*
      deflateSetHeader() provides gzip header information for when a gzip
    stream is requested by deflateInit2().  deflateSetHeader() may be called
@@ -821,16 +822,17 @@ ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
    gzip file" and give up.
 
      If deflateSetHeader is not used, the default gzip header has text false,
-   the time set to zero, and os set to 255, with no extra, name, or comment
-   fields.  The gzip header is returned to the default state by deflateReset().
+   the time set to zero, and os set to the current operating system, with no
+   extra, name, or comment fields.  The gzip header is returned to the default
+   state by deflateReset().
 
      deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent.
 */
 
 /*
-ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
-                                     int  windowBits));
+ZEXTERN int ZEXPORT inflateInit2(z_streamp strm,
+                                 int windowBits);
 
      This is another version of inflateInit with an extra parameter.  The
    fields next_in, avail_in, zalloc, zfree and opaque must be initialized
@@ -883,9 +885,9 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
    deferred until inflate() is called.
 */
 
-ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
-                                             const Bytef *dictionary,
-                                             uInt  dictLength));
+ZEXTERN int ZEXPORT inflateSetDictionary(z_streamp strm,
+                                         const Bytef *dictionary,
+                                         uInt  dictLength);
 /*
      Initializes the decompression dictionary from the given uncompressed byte
    sequence.  This function must be called immediately after a call of inflate,
@@ -906,9 +908,9 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
    inflate().
 */
 
-ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
-                                             Bytef *dictionary,
-                                             uInt  *dictLength));
+ZEXTERN int ZEXPORT inflateGetDictionary(z_streamp strm,
+                                         Bytef *dictionary,
+                                         uInt  *dictLength);
 /*
      Returns the sliding dictionary being maintained by inflate.  dictLength is
    set to the number of bytes in the dictionary, and that many bytes are copied
@@ -921,7 +923,7 @@ ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
    stream state is inconsistent.
 */
 
-ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateSync(z_streamp strm);
 /*
      Skips invalid compressed data until a possible full flush point (see above
    for the description of deflate with Z_FULL_FLUSH) can be found, or until all
@@ -940,8 +942,8 @@ ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
    input each time, until success or end of the input data.
 */
 
-ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
-                                    z_streamp source));
+ZEXTERN int ZEXPORT inflateCopy(z_streamp dest,
+                                z_streamp source);
 /*
      Sets the destination stream as a complete copy of the source stream.
 
@@ -956,18 +958,19 @@ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
    destination.
 */
 
-ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateReset(z_streamp strm);
 /*
      This function is equivalent to inflateEnd followed by inflateInit,
    but does not free and reallocate the internal decompression state.  The
    stream will keep attributes that may have been set by inflateInit2.
+   total_in, total_out, adler, and msg are initialized.
 
      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent (such as zalloc or state being Z_NULL).
 */
 
-ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
-                                      int windowBits));
+ZEXTERN int ZEXPORT inflateReset2(z_streamp strm,
+                                  int windowBits);
 /*
      This function is the same as inflateReset, but it also permits changing
    the wrap and window size requests.  The windowBits parameter is interpreted
@@ -980,9 +983,9 @@ ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
    the windowBits parameter is invalid.
 */
 
-ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
-                                     int bits,
-                                     int value));
+ZEXTERN int ZEXPORT inflatePrime(z_streamp strm,
+                                 int bits,
+                                 int value);
 /*
      This function inserts bits in the inflate input stream.  The intent is
    that this function is used to start inflating at a bit position in the
@@ -1001,7 +1004,7 @@ ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
    stream state was inconsistent.
 */
 
-ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+ZEXTERN long ZEXPORT inflateMark(z_streamp strm);
 /*
      This function returns two values, one in the lower 16 bits of the return
    value, and the other in the remaining upper bits, obtained by shifting the
@@ -1029,8 +1032,8 @@ ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
    source stream state was inconsistent.
 */
 
-ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
-                                         gz_headerp head));
+ZEXTERN int ZEXPORT inflateGetHeader(z_streamp strm,
+                                     gz_headerp head);
 /*
      inflateGetHeader() requests that gzip header information be stored in the
    provided gz_header structure.  inflateGetHeader() may be called after
@@ -1070,8 +1073,8 @@ ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
 */
 
 /*
-ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
-                                        unsigned char FAR *window));
+ZEXTERN int ZEXPORT inflateBackInit(z_streamp strm, int windowBits,
+                                    unsigned char FAR *window);
 
      Initialize the internal stream state for decompression using inflateBack()
    calls.  The fields zalloc, zfree and opaque in strm must be initialized
@@ -1091,13 +1094,13 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
    the version of the header file.
 */
 
-typedef unsigned (*in_func) OF((void FAR *,
-                                z_const unsigned char FAR * FAR *));
-typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+typedef unsigned (*in_func)(void FAR *,
+                            z_const unsigned char FAR * FAR *);
+typedef int (*out_func)(void FAR *, unsigned char FAR *, unsigned);
 
-ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
-                                    in_func in, void FAR *in_desc,
-                                    out_func out, void FAR *out_desc));
+ZEXTERN int ZEXPORT inflateBack(z_streamp strm,
+                                in_func in, void FAR *in_desc,
+                                out_func out, void FAR *out_desc);
 /*
      inflateBack() does a raw inflate with a single call using a call-back
    interface for input and output.  This is potentially more efficient than
@@ -1165,7 +1168,7 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
    cannot return Z_OK.
 */
 
-ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateBackEnd(z_streamp strm);
 /*
      All memory allocated by inflateBackInit() is freed.
 
@@ -1173,7 +1176,7 @@ ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
    state was inconsistent.
 */
 
-ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+ZEXTERN uLong ZEXPORT zlibCompileFlags(void);
 /* Return flags indicating compile-time options.
 
     Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
@@ -1226,8 +1229,8 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
    you need special options.
 */
 
-ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
-                                 const Bytef *source, uLong sourceLen));
+ZEXTERN int ZEXPORT compress(Bytef *dest,   uLongf *destLen,
+                             const Bytef *source, uLong sourceLen);
 /*
      Compresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer.  Upon entry, destLen is the total size
@@ -1241,9 +1244,9 @@ ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
    buffer.
 */
 
-ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
-                                  const Bytef *source, uLong sourceLen,
-                                  int level));
+ZEXTERN int ZEXPORT compress2(Bytef *dest,   uLongf *destLen,
+                              const Bytef *source, uLong sourceLen,
+                              int level);
 /*
      Compresses the source buffer into the destination buffer.  The level
    parameter has the same meaning as in deflateInit.  sourceLen is the byte
@@ -1257,15 +1260,15 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
    Z_STREAM_ERROR if the level parameter is invalid.
 */
 
-ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+ZEXTERN uLong ZEXPORT compressBound(uLong sourceLen);
 /*
      compressBound() returns an upper bound on the compressed size after
    compress() or compress2() on sourceLen bytes.  It would be used before a
    compress() or compress2() call to allocate the destination buffer.
 */
 
-ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
-                                   const Bytef *source, uLong sourceLen));
+ZEXTERN int ZEXPORT uncompress(Bytef *dest,   uLongf *destLen,
+                               const Bytef *source, uLong sourceLen);
 /*
      Decompresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer.  Upon entry, destLen is the total size
@@ -1282,8 +1285,8 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
    buffer with the uncompressed data up to that point.
 */
 
-ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
-                                    const Bytef *source, uLong *sourceLen));
+ZEXTERN int ZEXPORT uncompress2(Bytef *dest,   uLongf *destLen,
+                                const Bytef *source, uLong *sourceLen);
 /*
      Same as uncompress, except that sourceLen is a pointer, where the
    length of the source is *sourceLen.  On return, *sourceLen is the number of
@@ -1302,7 +1305,7 @@ ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
 typedef struct gzFile_s *gzFile;    /* semi-opaque gzip file descriptor */
 
 /*
-ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+ZEXTERN gzFile ZEXPORT gzopen(const char *path, const char *mode);
 
      Open the gzip (.gz) file at path for reading and decompressing, or
    compressing and writing.  The mode parameter is as in fopen ("rb" or "wb")
@@ -1339,7 +1342,7 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
    file could not be opened.
 */
 
-ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+ZEXTERN gzFile ZEXPORT gzdopen(int fd, const char *mode);
 /*
      Associate a gzFile with the file descriptor fd.  File descriptors are
    obtained from calls like open, dup, creat, pipe or fileno (if the file has
@@ -1362,7 +1365,7 @@ ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
    will not detect if fd is invalid (unless fd is -1).
 */
 
-ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+ZEXTERN int ZEXPORT gzbuffer(gzFile file, unsigned size);
 /*
      Set the internal buffer size used by this library's functions for file to
    size.  The default buffer size is 8192 bytes.  This function must be called
@@ -1378,7 +1381,7 @@ ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
    too late.
 */
 
-ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+ZEXTERN int ZEXPORT gzsetparams(gzFile file, int level, int strategy);
 /*
      Dynamically update the compression level and strategy for file.  See the
    description of deflateInit2 for the meaning of these parameters. Previously
@@ -1389,7 +1392,7 @@ ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
    or Z_MEM_ERROR if there is a memory allocation error.
 */
 
-ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+ZEXTERN int ZEXPORT gzread(gzFile file, voidp buf, unsigned len);
 /*
      Read and decompress up to len uncompressed bytes from file into buf.  If
    the input file is not in gzip format, gzread copies the given number of
@@ -1419,8 +1422,8 @@ ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
    Z_STREAM_ERROR.
 */
 
-ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
-                                     gzFile file));
+ZEXTERN z_size_t ZEXPORT gzfread(voidp buf, z_size_t size, z_size_t nitems,
+                                 gzFile file);
 /*
      Read and decompress up to nitems items of size size from file into buf,
    otherwise operating as gzread() does.  This duplicates the interface of
@@ -1445,14 +1448,14 @@ ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
    file, resetting and retrying on end-of-file, when size is not 1.
 */
 
-ZEXTERN int ZEXPORT gzwrite OF((gzFile file, voidpc buf, unsigned len));
+ZEXTERN int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len);
 /*
      Compress and write the len uncompressed bytes at buf to file. gzwrite
    returns the number of uncompressed bytes written or 0 in case of error.
 */
 
-ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
-                                      z_size_t nitems, gzFile file));
+ZEXTERN z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size,
+                                  z_size_t nitems, gzFile file);
 /*
      Compress and write nitems items of size size from buf to file, duplicating
    the interface of stdio's fwrite(), with size_t request and return types.  If
@@ -1465,7 +1468,7 @@ ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
    is returned, and the error state is set to Z_STREAM_ERROR.
 */
 
-ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA gzprintf(gzFile file, const char *format, ...);
 /*
      Convert, format, compress, and write the arguments (...) to file under
    control of the string format, as in fprintf.  gzprintf returns the number of
@@ -1480,7 +1483,7 @@ ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
    This can be determined using zlibCompileFlags().
 */
 
-ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+ZEXTERN int ZEXPORT gzputs(gzFile file, const char *s);
 /*
      Compress and write the given null-terminated string s to file, excluding
    the terminating null character.
@@ -1488,7 +1491,7 @@ ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
      gzputs returns the number of characters written, or -1 in case of error.
 */
 
-ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+ZEXTERN char * ZEXPORT gzgets(gzFile file, char *buf, int len);
 /*
      Read and decompress bytes from file into buf, until len-1 characters are
    read, or until a newline character is read and transferred to buf, or an
@@ -1502,13 +1505,13 @@ ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
    buf are indeterminate.
 */
 
-ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+ZEXTERN int ZEXPORT gzputc(gzFile file, int c);
 /*
      Compress and write c, converted to an unsigned char, into file.  gzputc
    returns the value that was written, or -1 in case of error.
 */
 
-ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+ZEXTERN int ZEXPORT gzgetc(gzFile file);
 /*
      Read and decompress one byte from file.  gzgetc returns this byte or -1
    in case of end of file or error.  This is implemented as a macro for speed.
@@ -1517,7 +1520,7 @@ ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
    points to has been clobbered or not.
 */
 
-ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+ZEXTERN int ZEXPORT gzungetc(int c, gzFile file);
 /*
      Push c back onto the stream for file to be read as the first character on
    the next read.  At least one character of push-back is always allowed.
@@ -1529,7 +1532,7 @@ ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
    gzseek() or gzrewind().
 */
 
-ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+ZEXTERN int ZEXPORT gzflush(gzFile file, int flush);
 /*
      Flush all pending output to file.  The parameter flush is as in the
    deflate() function.  The return value is the zlib error number (see function
@@ -1545,8 +1548,8 @@ ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
 */
 
 /*
-ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
-                                   z_off_t offset, int whence));
+ZEXTERN z_off_t ZEXPORT gzseek(gzFile file,
+                               z_off_t offset, int whence);
 
      Set the starting position to offset relative to whence for the next gzread
    or gzwrite on file.  The offset represents a number of bytes in the
@@ -1564,7 +1567,7 @@ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
    would be before the current position.
 */
 
-ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+ZEXTERN int ZEXPORT    gzrewind(gzFile file);
 /*
      Rewind file. This function is supported only for reading.
 
@@ -1572,7 +1575,7 @@ ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
 */
 
 /*
-ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+ZEXTERN z_off_t ZEXPORT    gztell(gzFile file);
 
      Return the starting position for the next gzread or gzwrite on file.
    This position represents a number of bytes in the uncompressed data stream,
@@ -1583,7 +1586,7 @@ ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
 */
 
 /*
-ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+ZEXTERN z_off_t ZEXPORT gzoffset(gzFile file);
 
      Return the current compressed (actual) read or write offset of file.  This
    offset includes the count of bytes that precede the gzip stream, for example
@@ -1592,7 +1595,7 @@ ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
    be used for a progress indicator.  On error, gzoffset() returns -1.
 */
 
-ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+ZEXTERN int ZEXPORT gzeof(gzFile file);
 /*
      Return true (1) if the end-of-file indicator for file has been set while
    reading, false (0) otherwise.  Note that the end-of-file indicator is set
@@ -1607,7 +1610,7 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file));
    has grown since the previous end of file was detected.
 */
 
-ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+ZEXTERN int ZEXPORT gzdirect(gzFile file);
 /*
      Return true (1) if file is being copied directly while reading, or false
    (0) if file is a gzip stream being decompressed.
@@ -1628,7 +1631,7 @@ ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
    gzip file reading and decompression, which may not be desired.)
 */
 
-ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+ZEXTERN int ZEXPORT    gzclose(gzFile file);
 /*
      Flush all pending output for file, if necessary, close file and
    deallocate the (de)compression state.  Note that once file is closed, you
@@ -1641,8 +1644,8 @@ ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
    last read ended in the middle of a gzip stream, or Z_OK on success.
 */
 
-ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
-ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_r(gzFile file);
+ZEXTERN int ZEXPORT gzclose_w(gzFile file);
 /*
      Same as gzclose(), but gzclose_r() is only for use when reading, and
    gzclose_w() is only for use when writing or appending.  The advantage to
@@ -1653,7 +1656,7 @@ ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
    zlib library.
 */
 
-ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+ZEXTERN const char * ZEXPORT gzerror(gzFile file, int *errnum);
 /*
      Return the error message for the last error which occurred on file.
    errnum is set to zlib error number.  If an error occurred in the file system
@@ -1669,7 +1672,7 @@ ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
    functions above that do not distinguish those cases in their return values.
 */
 
-ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+ZEXTERN void ZEXPORT gzclearerr(gzFile file);
 /*
      Clear the error and end-of-file flags for file.  This is analogous to the
    clearerr() function in stdio.  This is useful for continuing to read a gzip
@@ -1686,7 +1689,7 @@ ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
    library.
 */
 
-ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+ZEXTERN uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len);
 /*
      Update a running Adler-32 checksum with the bytes buf[0..len-1] and
    return the updated checksum. An Adler-32 value is in the range of a 32-bit
@@ -1706,15 +1709,15 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
      if (adler != original_adler) error();
 */
 
-ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
-                                    z_size_t len));
+ZEXTERN uLong ZEXPORT adler32_z(uLong adler, const Bytef *buf,
+                                z_size_t len);
 /*
      Same as adler32(), but with a size_t length.
 */
 
 /*
-ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
-                                          z_off_t len2));
+ZEXTERN uLong ZEXPORT adler32_combine(uLong adler1, uLong adler2,
+                                      z_off_t len2);
 
      Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
    and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
@@ -1724,7 +1727,7 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
    negative, the result has no meaning or utility.
 */
 
-ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+ZEXTERN uLong ZEXPORT crc32(uLong crc, const Bytef *buf, uInt len);
 /*
      Update a running CRC-32 with the bytes buf[0..len-1] and return the
    updated CRC-32. A CRC-32 value is in the range of a 32-bit unsigned integer.
@@ -1742,14 +1745,14 @@ ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
      if (crc != original_crc) error();
 */
 
-ZEXTERN uLong ZEXPORT crc32_z OF((uLong crc, const Bytef *buf,
-                                  z_size_t len));
+ZEXTERN uLong ZEXPORT crc32_z(uLong crc, const Bytef *buf,
+                              z_size_t len);
 /*
      Same as crc32(), but with a size_t length.
 */
 
 /*
-ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+ZEXTERN uLong ZEXPORT crc32_combine(uLong crc1, uLong crc2, z_off_t len2);
 
      Combine two CRC-32 check values into one.  For two sequences of bytes,
    seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
@@ -1759,13 +1762,13 @@ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
 */
 
 /*
-ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t len2));
+ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t len2);
 
      Return the operator corresponding to length len2, to be used with
    crc32_combine_op().
 */
 
-ZEXTERN uLong ZEXPORT crc32_combine_op OF((uLong crc1, uLong crc2, uLong op));
+ZEXTERN uLong ZEXPORT crc32_combine_op(uLong crc1, uLong crc2, uLong op);
 /*
      Give the same result as crc32_combine(), using op in place of len2. op is
    is generated from len2 by crc32_combine_gen(). This will be faster than
@@ -1778,20 +1781,20 @@ ZEXTERN uLong ZEXPORT crc32_combine_op OF((uLong crc1, uLong crc2, uLong op));
 /* deflateInit and inflateInit are macros to allow checking the zlib version
  * and the compiler's view of z_stream:
  */
-ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
-                                     const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
-                                     const char *version, int stream_size));
-ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-                                      int windowBits, int memLevel,
-                                      int strategy, const char *version,
-                                      int stream_size));
-ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
-                                      const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
-                                         unsigned char FAR *window,
-                                         const char *version,
-                                         int stream_size));
+ZEXTERN int ZEXPORT deflateInit_(z_streamp strm, int level,
+                                 const char *version, int stream_size);
+ZEXTERN int ZEXPORT inflateInit_(z_streamp strm,
+                                 const char *version, int stream_size);
+ZEXTERN int ZEXPORT deflateInit2_(z_streamp strm, int  level, int  method,
+                                  int windowBits, int memLevel,
+                                  int strategy, const char *version,
+                                  int stream_size);
+ZEXTERN int ZEXPORT inflateInit2_(z_streamp strm, int  windowBits,
+                                  const char *version, int stream_size);
+ZEXTERN int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits,
+                                     unsigned char FAR *window,
+                                     const char *version,
+                                     int stream_size);
 #ifdef Z_PREFIX_SET
 #  define z_deflateInit(strm, level) \
           deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
@@ -1836,7 +1839,7 @@ struct gzFile_s {
     unsigned char *next;
     z_off64_t pos;
 };
-ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
+ZEXTERN int ZEXPORT gzgetc_(gzFile file);       /* backward compatibility */
 #ifdef Z_PREFIX_SET
 #  undef z_gzgetc
 #  define z_gzgetc(g) \
@@ -1853,13 +1856,13 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
  * without large file support, _LFS64_LARGEFILE must also be true
  */
 #ifdef Z_LARGE64
-   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
-   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
-   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
-   ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off64_t));
+   ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *);
+   ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int);
+   ZEXTERN z_off64_t ZEXPORT gztell64(gzFile);
+   ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile);
+   ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off64_t);
+   ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off64_t);
+   ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off64_t);
 #endif
 
 #if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
@@ -1881,50 +1884,50 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
 #    define crc32_combine_gen crc32_combine_gen64
 #  endif
 #  ifndef Z_LARGE64
-     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
-     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
-     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
-     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
-     ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off_t));
+     ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *);
+     ZEXTERN z_off_t ZEXPORT gzseek64(gzFile, z_off_t, int);
+     ZEXTERN z_off_t ZEXPORT gztell64(gzFile);
+     ZEXTERN z_off_t ZEXPORT gzoffset64(gzFile);
+     ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off_t);
+     ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off_t);
+     ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off_t);
 #  endif
 #else
-   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
-   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
-   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
-   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
-   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
-   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
-   ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t));
+   ZEXTERN gzFile ZEXPORT gzopen(const char *, const char *);
+   ZEXTERN z_off_t ZEXPORT gzseek(gzFile, z_off_t, int);
+   ZEXTERN z_off_t ZEXPORT gztell(gzFile);
+   ZEXTERN z_off_t ZEXPORT gzoffset(gzFile);
+   ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t);
+   ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t);
+   ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t);
 #endif
 
 #else /* Z_SOLO */
 
-   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
-   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
-   ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t));
+   ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t);
+   ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t);
+   ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t);
 
 #endif /* !Z_SOLO */
 
 /* undocumented functions */
-ZEXTERN const char   * ZEXPORT zError           OF((int));
-ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
-ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
-ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
-ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
-ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF((z_streamp));
-ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
-ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
+ZEXTERN const char   * ZEXPORT zError(int);
+ZEXTERN int            ZEXPORT inflateSyncPoint(z_streamp);
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table(void);
+ZEXTERN int            ZEXPORT inflateUndermine(z_streamp, int);
+ZEXTERN int            ZEXPORT inflateValidate(z_streamp, int);
+ZEXTERN unsigned long  ZEXPORT inflateCodesUsed(z_streamp);
+ZEXTERN int            ZEXPORT inflateResetKeep(z_streamp);
+ZEXTERN int            ZEXPORT deflateResetKeep(z_streamp);
 #if defined(_WIN32) && !defined(Z_SOLO)
-ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
-                                            const char *mode));
+ZEXTERN gzFile         ZEXPORT gzopen_w(const wchar_t *path,
+                                        const char *mode);
 #endif
 #if defined(STDC) || defined(Z_HAVE_STDARG_H)
 #  ifndef Z_SOLO
-ZEXTERN int            ZEXPORTVA gzvprintf Z_ARG((gzFile file,
-                                                  const char *format,
-                                                  va_list va));
+ZEXTERN int            ZEXPORTVA gzvprintf(gzFile file,
+                                           const char *format,
+                                           va_list va);
 #  endif
 #endif
 
diff --git a/compat/zlib/zlib2ansi b/compat/zlib/zlib2ansi
deleted file mode 100755
index 23b2a1d..0000000
--- a/compat/zlib/zlib2ansi
+++ /dev/null
@@ -1,152 +0,0 @@
-#!/usr/bin/perl
-
-# Transform K&R C function definitions into ANSI equivalent.
-#
-# Author: Paul Marquess
-# Version: 1.0
-# Date: 3 October 2006
-
-# TODO
-#
-# Assumes no function pointer parameters. unless they are typedefed.
-# Assumes no literal strings that look like function definitions
-# Assumes functions start at the beginning of a line
-
-use strict;
-use warnings;
-
-local $/;
-$_ = <>;
-
-my $sp = qr{ \s* (?: /\* .*? \*/ )? \s* }x; # assume no nested comments
-
-my $d1    = qr{ $sp (?: [\w\*\s]+ $sp)* $sp \w+ $sp [\[\]\s]* $sp }x ;
-my $decl  = qr{ $sp (?: \w+ $sp )+ $d1 }xo ;
-my $dList = qr{ $sp $decl (?: $sp , $d1 )* $sp ; $sp }xo ;
-
-
-while (s/^
-            (                  # Start $1
-                (              #   Start $2
-                    .*?        #     Minimal eat content
-                    ( ^ \w [\w\s\*]+ )    #     $3 -- function name
-                    \s*        #     optional whitespace
-                )              # $2 - Matched up to before parameter list
-
-                \( \s*         # Literal "(" + optional whitespace
-                ( [^\)]+ )     # $4 - one or more anythings except ")"
-                \s* \)         # optional whitespace surrounding a Literal ")"
-
-                ( (?: $dList )+ ) # $5
-
-                $sp ^ {        # literal "{" at start of line
-            )                  # Remember to $1
-        //xsom
-      )
-{
-    my $all = $1 ;
-    my $prefix = $2;
-    my $param_list = $4 ;
-    my $params = $5;
-
-    StripComments($params);
-    StripComments($param_list);
-    $param_list =~ s/^\s+//;
-    $param_list =~ s/\s+$//;
-
-    my $i = 0 ;
-    my %pList = map { $_ => $i++ }
-                split /\s*,\s*/, $param_list;
-    my $pMatch = '(\b' . join('|', keys %pList) . '\b)\W*$' ;
-
-    my @params = split /\s*;\s*/, $params;
-    my @outParams = ();
-    foreach my $p (@params)
-    {
-        if ($p =~ /,/)
-        {
-            my @bits = split /\s*,\s*/, $p;
-            my $first = shift @bits;
-            $first =~ s/^\s*//;
-            push @outParams, $first;
-            $first =~ /^(\w+\s*)/;
-            my $type = $1 ;
-            push @outParams, map { $type . $_ } @bits;
-        }
-        else
-        {
-            $p =~ s/^\s+//;
-            push @outParams, $p;
-        }
-    }
-
-
-    my %tmp = map { /$pMatch/;  $_ => $pList{$1}  }
-              @outParams ;
-
-    @outParams = map  { "    $_" }
-                 sort { $tmp{$a} <=> $tmp{$b} }
-                 @outParams ;
-
-    print $prefix ;
-    print "(\n" . join(",\n", @outParams) . ")\n";
-    print "{" ;
-
-}
-
-# Output any trailing code.
-print ;
-exit 0;
-
-
-sub StripComments
-{
-
-  no warnings;
-
-  # Strip C & C++ comments
-  # From the perlfaq
-  $_[0] =~
-
-    s{
-       /\*         ##  Start of /* ... */ comment
-       [^*]*\*+    ##  Non-* followed by 1-or-more *'s
-       (
-         [^/*][^*]*\*+
-       )*          ##  0-or-more things which don't start with /
-                   ##    but do end with '*'
-       /           ##  End of /* ... */ comment
-
-     |         ##     OR  C++ Comment
-       //          ## Start of C++ comment //
-       [^\n]*      ## followed by 0-or-more non end of line characters
-
-     |         ##     OR  various things which aren't comments:
-
-       (
-         "           ##  Start of " ... " string
-         (
-           \\.           ##  Escaped char
-         |               ##    OR
-           [^"\\]        ##  Non "\
-         )*
-         "           ##  End of " ... " string
-
-       |         ##     OR
-
-         '           ##  Start of ' ... ' string
-         (
-           \\.           ##  Escaped char
-         |               ##    OR
-           [^'\\]        ##  Non '\
-         )*
-         '           ##  End of ' ... ' string
-
-       |         ##     OR
-
-         .           ##  Anything other char
-         [^/"'\\]*   ##  Chars which doesn't start a comment, string or escape
-       )
-     }{$2}gxs;
-
-}
diff --git a/compat/zlib/zutil.c b/compat/zlib/zutil.c
index 9543ae8..b1c5d2d 100644
--- a/compat/zlib/zutil.c
+++ b/compat/zlib/zutil.c
@@ -24,13 +24,11 @@ z_const char * const z_errmsg[10] = {
 };
 
 
-const char * ZEXPORT zlibVersion()
-{
+const char * ZEXPORT zlibVersion(void) {
     return ZLIB_VERSION;
 }
 
-uLong ZEXPORT zlibCompileFlags()
-{
+uLong ZEXPORT zlibCompileFlags(void) {
     uLong flags;
 
     flags = 0;
@@ -121,9 +119,7 @@ uLong ZEXPORT zlibCompileFlags()
 #  endif
 int ZLIB_INTERNAL z_verbose = verbose;
 
-void ZLIB_INTERNAL z_error(m)
-    char *m;
-{
+void ZLIB_INTERNAL z_error(char *m) {
     fprintf(stderr, "%s\n", m);
     exit(1);
 }
@@ -132,9 +128,7 @@ void ZLIB_INTERNAL z_error(m)
 /* exported to allow conversion of error code to string for compress() and
  * uncompress()
  */
-const char * ZEXPORT zError(err)
-    int err;
-{
+const char * ZEXPORT zError(int err) {
     return ERR_MSG(err);
 }
 
@@ -148,22 +142,14 @@ const char * ZEXPORT zError(err)
 
 #ifndef HAVE_MEMCPY
 
-void ZLIB_INTERNAL zmemcpy(dest, source, len)
-    Bytef* dest;
-    const Bytef* source;
-    uInt  len;
-{
+void ZLIB_INTERNAL zmemcpy(Bytef* dest, const Bytef* source, uInt len) {
     if (len == 0) return;
     do {
         *dest++ = *source++; /* ??? to be unrolled */
     } while (--len != 0);
 }
 
-int ZLIB_INTERNAL zmemcmp(s1, s2, len)
-    const Bytef* s1;
-    const Bytef* s2;
-    uInt  len;
-{
+int ZLIB_INTERNAL zmemcmp(const Bytef* s1, const Bytef* s2, uInt len) {
     uInt j;
 
     for (j = 0; j < len; j++) {
@@ -172,10 +158,7 @@ int ZLIB_INTERNAL zmemcmp(s1, s2, len)
     return 0;
 }
 
-void ZLIB_INTERNAL zmemzero(dest, len)
-    Bytef* dest;
-    uInt  len;
-{
+void ZLIB_INTERNAL zmemzero(Bytef* dest, uInt len) {
     if (len == 0) return;
     do {
         *dest++ = 0;  /* ??? to be unrolled */
@@ -216,8 +199,7 @@ local ptr_table table[MAX_PTR];
  * a protected system like OS/2. Use Microsoft C instead.
  */
 
-voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size)
-{
+voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size) {
     voidpf buf;
     ulg bsize = (ulg)items*size;
 
@@ -242,8 +224,7 @@ voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size)
     return buf;
 }
 
-void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
-{
+void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr) {
     int n;
 
     (void)opaque;
@@ -279,14 +260,12 @@ void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
 #  define _hfree   hfree
 #endif
 
-voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, uInt items, uInt size)
-{
+voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, uInt items, uInt size) {
     (void)opaque;
     return _halloc((long)items, size);
 }
 
-void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
-{
+void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr) {
     (void)opaque;
     _hfree(ptr);
 }
@@ -299,25 +278,18 @@ void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
 #ifndef MY_ZCALLOC /* Any system without a special alloc function */
 
 #ifndef STDC
-extern voidp  malloc OF((uInt size));
-extern voidp  calloc OF((uInt items, uInt size));
-extern void   free   OF((voidpf ptr));
+extern voidp malloc(uInt size);
+extern voidp calloc(uInt items, uInt size);
+extern void free(voidpf ptr);
 #endif
 
-voidpf ZLIB_INTERNAL zcalloc(opaque, items, size)
-    voidpf opaque;
-    unsigned items;
-    unsigned size;
-{
+voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size) {
     (void)opaque;
     return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
                               (voidpf)calloc(items, size);
 }
 
-void ZLIB_INTERNAL zcfree(opaque, ptr)
-    voidpf opaque;
-    voidpf ptr;
-{
+void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr) {
     (void)opaque;
     free(ptr);
 }
diff --git a/compat/zlib/zutil.h b/compat/zlib/zutil.h
index 0bc7f4e..902a304 100644
--- a/compat/zlib/zutil.h
+++ b/compat/zlib/zutil.h
@@ -191,9 +191,9 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 /* provide prototypes for these when building zlib without LFS */
 #if !defined(_WIN32) && \
     (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
-    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
-    ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off_t));
+    ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off_t);
+    ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off_t);
+    ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off_t);
 #endif
 
         /* common defaults */
@@ -232,16 +232,16 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #    define zmemzero(dest, len) memset(dest, 0, len)
 #  endif
 #else
-   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
-   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
-   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
+   void ZLIB_INTERNAL zmemcpy(Bytef* dest, const Bytef* source, uInt len);
+   int ZLIB_INTERNAL zmemcmp(const Bytef* s1, const Bytef* s2, uInt len);
+   void ZLIB_INTERNAL zmemzero(Bytef* dest, uInt len);
 #endif
 
 /* Diagnostic functions */
 #ifdef ZLIB_DEBUG
 #  include <stdio.h>
    extern int ZLIB_INTERNAL z_verbose;
-   extern void ZLIB_INTERNAL z_error OF((char *m));
+   extern void ZLIB_INTERNAL z_error(char *m);
 #  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
 #  define Trace(x) {if (z_verbose>=0) fprintf x ;}
 #  define Tracev(x) {if (z_verbose>0) fprintf x ;}
@@ -258,9 +258,9 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #endif
 
 #ifndef Z_SOLO
-   voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
-                                    unsigned size));
-   void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));
+   voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items,
+                                unsigned size);
+   void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr);
 #endif
 
 #define ZALLOC(strm, items, size) \