* doc/CrtChannel.3:

	* doc/Interp.3:
	* doc/Limit.3:
	* doc/binary.n:
	* doc/dict.n:
	* doc/tm.n:
	* doc/upvar.n: fixed *roff errors uncovered by running 'make html'.

	* tools/tcltk-man2html.tcl: added faked support for bullet point
	lists, i.e. *nroff ".IP \(bu" syntax.

7 files changed, 26 insertions, 26 deletions

diff --git a/doc/CrtChannel.3 b/doc/CrtChannel.3
index 8fce08c..779b755 100644
--- a/doc/CrtChannel.3
+++ b/doc/CrtChannel.3
@@ -5,7 +5,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\"
-'\" RCS: @(#) $Id: CrtChannel.3,v 1.23 2004/11/02 09:23:38 dkf Exp $
+'\" RCS: @(#) $Id: CrtChannel.3,v 1.24 2004/11/12 09:01:25 das Exp $
 .so man.macros
 .TH Tcl_CreateChannel 3 8.3 Tcl "Tcl Library Procedures"
 .BS
@@ -35,7 +35,7 @@ int
 Tcl_ThreadId
 \fBTcl_GetChannelThread\fR(\fIchannel\fR)
 .VE 8.4
-.SP
+.sp
 int
 \fBTcl_GetChannelMode\fR(\fIchannel\fR)
 .sp
diff --git a/doc/Interp.3 b/doc/Interp.3
index 14ac854..a67c9f1 100644
--- a/doc/Interp.3
+++ b/doc/Interp.3
@@ -5,7 +5,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: Interp.3,v 1.6 2004/10/07 14:52:43 dkf Exp $
+'\" RCS: @(#) $Id: Interp.3,v 1.7 2004/11/12 09:01:25 das Exp $
 '\" 
 .so man.macros
 .TH Tcl_Interp 3 7.5 Tcl "Tcl Library Procedures"
@@ -34,8 +34,8 @@ on the interpreter.  Interpreter structures contain many fields
 that are used by Tcl, but only three that may be accessed by
 clients:  \fIresult\fR, \fIfreeProc\fR, and \fIerrorLine\fR.
 .PP
-\fBNote that access to the \fIresult\fP and \fIfreeProc\fP fields is
-deprecated.\fR  Use \fBTcl_SetResult\fR and \fBTcl_GetResult\fR instead.
+\fBNote that access to the \fIresult\fB and \fIfreeProc\fB fields is\fR
+\fBdeprecated.\fR  Use \fBTcl_SetResult\fR and \fBTcl_GetResult\fR instead.
 .PP
 The \fIresult\fR and \fIfreeProc\fR fields are used to return
 results or error messages from commands.
diff --git a/doc/Limit.3 b/doc/Limit.3
index 389c406..002b422 100644
--- a/doc/Limit.3
+++ b/doc/Limit.3
@@ -4,7 +4,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: Limit.3,v 1.6 2004/10/07 16:05:14 dkf Exp $
+'\" RCS: @(#) $Id: Limit.3,v 1.7 2004/11/12 09:01:25 das Exp $
 '\" 
 .so man.macros
 .TH Tcl_LimitCheck 3 8.5 Tcl "Tcl Library Procedures"
@@ -148,7 +148,7 @@ call \fBTcl_LimitTypeSet\fR, and to disable a limit call
 The level of a command limit may be set using
 \fBTcl_LimitSetCommands\fR, and retrieved using
 \fBTcl_LimitGetCommands\fR.  Similarly for a time limit with
-\fRTcl_LimitSetTime\fR and \fBTcl_LimitGetTime\fR respectively, but
+\fBTcl_LimitSetTime\fR and \fBTcl_LimitGetTime\fR respectively, but
 with that API the time limit is copied from and to the Tcl_Time
 structure that the \fItimeLimitPtr\fR argument points to.
 .PP
diff --git a/doc/binary.n b/doc/binary.n
index ca75b6a..a4f7008 100644
--- a/doc/binary.n
+++ b/doc/binary.n
@@ -4,7 +4,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: binary.n,v 1.22 2004/10/27 14:24:37 dkf Exp $
+'\" RCS: @(#) $Id: binary.n,v 1.23 2004/11/12 09:01:25 das Exp $
 '\" 
 .so man.macros
 .TH binary n 8.0 Tcl "Tcl Built-In Commands"
@@ -82,7 +82,7 @@ formatted.  For example,
 .CE
 will return a string equivalent to \fBalpha\\000\\000bravoc\fR and
 .CS
-\fBbinary format a* [encoding convertto utf-8 \\u20ac]
+\fBbinary format a* [encoding convertto utf-8 \\u20ac]\fR
 .CE
 will return a string equivalent to \fB\\342\\202\\254\fR (which is the
 UTF-8 byte sequence for a Euro-currency character).
diff --git a/doc/dict.n b/doc/dict.n
index 98cb491..f0d4ea9 100644
--- a/doc/dict.n
+++ b/doc/dict.n
@@ -4,7 +4,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\"
-'\" RCS: @(#) $Id: dict.n,v 1.10 2004/10/31 15:38:35 dkf Exp $
+'\" RCS: @(#) $Id: dict.n,v 1.11 2004/11/12 09:01:25 das Exp $
 '\"
 .so man.macros
 .TH dict n 8.5 Tcl "Tcl Built-In Commands"
@@ -268,8 +268,8 @@ foreach c {abcdefghijklmnopqrstuvwxyz} {
 
 # English locales can luckily share the "C" locale
 \fBdict set\fR capital en [\fBdict get\fR $capital C]
-\fBdict set\fR capital en_US [\fRdict get\fR $capital C]
-\fBdict set\fR capital en_GB [\fRdict get\fR $capital C]
+\fBdict set\fR capital en_US [\fBdict get\fR $capital C]
+\fBdict set\fR capital en_GB [\fBdict get\fR $capital C]
 
 # ... and so on for other supported languages ...
 
diff --git a/doc/tm.n b/doc/tm.n
index d8a35cc..aa33fc4 100644
--- a/doc/tm.n
+++ b/doc/tm.n
@@ -4,7 +4,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: tm.n,v 1.4 2004/10/22 22:33:48 dkf Exp $
+'\" RCS: @(#) $Id: tm.n,v 1.5 2004/11/12 09:01:25 das Exp $
 '\" 
 .so man.macros
 .TH tm n 8.5 Tcl "Tcl Built-In Commands"
@@ -25,7 +25,7 @@ tm \- Facilities for locating and loading of Tcl Modules
 This document describes the facilities for locating and loading Tcl
 Modules. The following commands are supported:
 .TP
-\fB::tcl::tm::path\fR \fBadd\fR \fIpath\fR...\fR
+\fB::tcl::tm::path\fR \fBadd\fR \fIpath\fR...
 The paths are added at the head to the list of module paths, in order
 of appearance. This means that the last argument ends up as the new
 head of the list.
@@ -46,15 +46,15 @@ reverse order of addition. In other words, the paths added last are
 looked at first.
 .RE
 .TP
-\fB::tcl::tm::path\fR \fBremove\fR \fIpath\fR...\fR
+\fB::tcl::tm::path\fR \fBremove\fR \fIpath\fR...
 Removes the paths from the list of module paths. The command silently
 ignores all paths which are not on the list.
 .TP
-\fB::tcl::tm::path\fR \fBlist\fR\fR
+\fB::tcl::tm::path\fR \fBlist\fR
 Returns a list containing all registered module paths, in the order
 that they are searched for modules.
 .TP
-\fB::tcl::tm::roots\fR \fIpath\fR...\fR
+\fB::tcl::tm::roots\fR \fIpath\fR...
 Similar to \fBpath add\fR, and layered on top of it. This command
 takes a list of paths, extends each with "\fBtcl\fIX\fB/site-tcl\fR",
 and "\fBtcl\fIX\fB/\fIX\fB.\fIy\fR", for major version \fIX\fR of the
diff --git a/doc/upvar.n b/doc/upvar.n
index 8cc28a6..145adf9 100644
--- a/doc/upvar.n
+++ b/doc/upvar.n
@@ -5,7 +5,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: upvar.n,v 1.8 2004/10/27 14:43:54 dkf Exp $
+'\" RCS: @(#) $Id: upvar.n,v 1.9 2004/11/12 09:01:25 das Exp $
 '\" 
 .so man.macros
 .TH upvar n "" Tcl "Tcl Built-In Commands"
@@ -46,12 +46,12 @@ procedure calling and also makes it easier to build new control constructs
 as Tcl procedures.
 For example, consider the following procedure:
 .CS
-\fBproc add2 name {
+proc \fBadd2\fR name {
    \fBupvar\fR $name x
    set x [expr $x+2]
-}\fR
+}
 .CE
-\fBAdd2\fR is invoked with an argument giving the name of a variable,
+\fBadd2\fR is invoked with an argument giving the name of a variable,
 and it adds two to the value of that variable.
 Although \fBadd2\fR could have been implemented using \fBuplevel\fR
 instead of \fBupvar\fR, \fBupvar\fR makes it simpler for \fBadd2\fR
@@ -84,17 +84,17 @@ the trace procedure will be passed the name of \fImyVar\fR, rather
 than the name of \fIotherVar\fR.  Thus, the output of the following code
 will be \fBlocalVar\fR rather than \fBoriginalVar\fR:
 .CS
-\fBproc traceproc { name index op } {
+proc \fBtraceproc\fR { name index op } {
    puts $name
 }
-proc setByUpvar { name value } {
+proc \fBsetByUpvar\fR { name value } {
    \fBupvar\fR $name localVar
    set localVar $value
 }
 set originalVar 1
-trace variable originalVar w traceproc
-setByUpvar originalVar 2
-}\fR
+trace variable originalVar w \fBtraceproc\fR
+\fBsetByUpvar\fR originalVar 2
+}
 .CE
 .PP
 If \fIotherVar\fR refers to an element of an array, then variable