More small documentation improvements.

13 files changed, 31 insertions, 31 deletions

diff --git a/doc/binary.n b/doc/binary.n
index 53d8b5a..8133829 100644
--- a/doc/binary.n
+++ b/doc/binary.n
@@ -13,9 +13,9 @@
 binary \- Insert and extract fields from binary strings
 .SH SYNOPSIS
 .VS 8.6
-\fBbinary decode \fIformat\fR ?\fI-option value ...\fR? \fIdata\fR
+\fBbinary decode \fIformat\fR ?\fI\-option value ...\fR? \fIdata\fR
 .br
-\fBbinary encode \fIformat\fR ?\fI-option value ...\fR? \fIdata\fR
+\fBbinary encode \fIformat\fR ?\fI\-option value ...\fR? \fIdata\fR
 .br
 .VE 8.6
 \fBbinary format \fIformatString \fR?\fIarg arg ...\fR?
diff --git a/doc/clock.n b/doc/clock.n
index 56a139e..8708029 100644
--- a/doc/clock.n
+++ b/doc/clock.n
@@ -42,12 +42,12 @@ is system-dependent but should be the highest resolution clock available
 on the system such as a CPU cycle counter.  See \fBHIGH RESOLUTION TIMERS\fR for a full description.
 .RS
 .PP
-If the \fI\-option\fR argument is \fI\-milliseconds\fR, then the command
+If the \fI\-option\fR argument is \fB\-milliseconds\fR, then the command
 is synonymous with \fBclock milliseconds\fR (see below).  This
 usage is obsolete, and \fBclock milliseconds\fR is to be
 considered the preferred way of obtaining a count of milliseconds.
 .PP
-If the \fI\-option\fR argument is \fI\-microseconds\fR, then the command
+If the \fI\-option\fR argument is \fB\-microseconds\fR, then the command
 is synonymous with \fBclock microseconds\fR (see below).  This
 usage is obsolete, and \fBclock microseconds\fR is to be
 considered the preferred way of obtaining a count of microseconds.
@@ -116,7 +116,7 @@ On \fBclock format\fR, the default format is
 %a %b %d %H:%M:%S %z %Y
 .CE
 .PP
-On \fBclock scan\fR, the lack of a \fI\-format\fR option indicates that a
+On \fBclock scan\fR, the lack of a \fB\-format\fR option indicates that a
 .QW "free format scan"
 is requested; see \fBFREE FORM SCAN\fR for a description of what happens.
 .RE
@@ -904,7 +904,7 @@ or
 Note that only these three formats are accepted.
 The command does \fInot\fR accept the full range of point-in-time
 specifications specified in ISO8601.  Other formats can be recognized by
-giving an explicit \fI\-format\fR option to the \fBclock scan\fR command.
+giving an explicit \fB\-format\fR option to the \fBclock scan\fR command.
 .TP
 \fIrelative time\fR
 A specification relative to the current time.  The format is \fBnumber
diff --git a/doc/file.n b/doc/file.n
index 9205d3b..eef4647 100644
--- a/doc/file.n
+++ b/doc/file.n
@@ -104,7 +104,7 @@ within a single filesystem, \fIfile copy\fR will copy soft links (i.e.
 the links themselves are copied, not the things they point to).  Trying
 to overwrite a non-empty directory, overwrite a directory with a file,
 or overwrite a file with a directory will all result in errors even if
-\fI\-force\fR was specified.  Arguments are processed in the order
+\fB\-force\fR was specified.  Arguments are processed in the order
 specified, halting at the first error, if any.  A \fB\-\|\-\fR marks
 the end of switches; the argument following the \fB\-\|\-\fR will be
 treated as a \fIsource\fR even if it starts with a \fB\-\fR.
@@ -227,9 +227,9 @@ If the user wishes to make a link of a specific type only, (and signal an
 error if for some reason that is not possible), then the optional
 \fI\-linktype\fR argument should be given.  Accepted values for
 \fI\-linktype\fR are
-.QW \-symbolic
+.QW \fB\-symbolic\fR
 and
-.QW \-hard .
+.QW \fB\-hard\fR .
 .PP
 On Unix, symbolic links can be made to relative paths, and those paths
 must be relative to the actual \fIlinkName\fR's location (not to the
diff --git a/doc/http.n b/doc/http.n
index b05588e..631a141 100644
--- a/doc/http.n
+++ b/doc/http.n
@@ -16,9 +16,9 @@ http \- Client-side implementation of the HTTP/1.1 protocol
 \fBpackage require http ?2.7?\fR
 .\" See Also -useragent option documentation in body!
 .sp
-\fB::http::config ?\fI-option value\fR ...?
+\fB::http::config ?\fI\-option value\fR ...?
 .sp
-\fB::http::geturl \fIurl\fR ?\fI-option value\fR ...?
+\fB::http::geturl \fIurl\fR ?\fI\-option value\fR ...?
 .sp
 \fB::http::formatQuery\fR \fIkey value\fR ?\fIkey value\fR ...?
 .sp
diff --git a/doc/interp.n b/doc/interp.n
index 02421e1..b261779 100644
--- a/doc/interp.n
+++ b/doc/interp.n
@@ -194,11 +194,11 @@ given name already exists in this master.
 The initial recursion limit of the slave interpreter is set to the
 current recursion limit of its parent interpreter.
 .TP
-\fBinterp\fR \fBdebug \fIpath\fR ?\fI\-frame\fR ?\fIbool\fR??
+\fBinterp\fR \fBdebug \fIpath\fR ?\fB\-frame\fR ?\fIbool\fR??
 .
 Controls whether frame-level stack information is captured in the
 slave interpreter identified by \fIpath\fR.  If no arguments are
-given, option and current setting are returned.  If \fI\-frame\fR
+given, option and current setting are returned.  If \fB\-frame\fR
 is given, the debug setting is set to the given boolean if provided
 and the current setting is returned.
 This only effects the output of \fBinfo frame\fR, in that exact
diff --git a/doc/lsearch.n b/doc/lsearch.n
index a049b53..7835352 100644
--- a/doc/lsearch.n
+++ b/doc/lsearch.n
@@ -161,7 +161,7 @@ If this option is given, the index result from this command (or every
 index result when \fB\-all\fR is also specified) will be a complete
 path (suitable for use with \fBlindex\fR or \fBlset\fR) within the
 overall list to the term found.  This option has no effect unless the
-\fI\-index\fR is also specified, and is just a convenience short-cut.
+\fB\-index\fR is also specified, and is just a convenience short-cut.
 .SH EXAMPLES
 .PP
 Basic searching:
diff --git a/doc/lsort.n b/doc/lsort.n
index 8e85f5a..312048e 100644
--- a/doc/lsort.n
+++ b/doc/lsort.n
@@ -79,7 +79,7 @@ the values themselves.
 \fB\-index\0\fIindexList\fR
 .
 If this option is specified, each of the elements of \fIlist\fR must
-itself be a proper Tcl sublist (unless \fB-stride\fR is used).
+itself be a proper Tcl sublist (unless \fB\-stride\fR is used).
 Instead of sorting based on whole sublists, \fBlsort\fR will extract
 the \fIindexList\fR'th element from each sublist (as if the overall
 element and the \fIindexList\fR were passed to \fBlindex\fR) and sort
@@ -161,7 +161,7 @@ effect if combined with the \fB\-dictionary\fR, \fB\-integer\fR, or
 If this option is specified, then only the last set of duplicate
 elements found in the list will be retained.  Note that duplicates are
 determined relative to the comparison used in the sort.  Thus if 
-\fI\-index 0\fR is used, \fB{1 a}\fR and \fB{1 b}\fR would be
+\fB\-index 0\fR is used, \fB{1 a}\fR and \fB{1 b}\fR would be
 considered duplicates and only the second element, \fB{1 b}\fR, would
 be retained.
 .SH "NOTES"
diff --git a/doc/mathop.n b/doc/mathop.n
index 282b636..e359276 100644
--- a/doc/mathop.n
+++ b/doc/mathop.n
@@ -133,7 +133,7 @@ holds true:
 .RS
 .PP
 .CS
-(\fIx \fB/ \fIy\fR) \fB* \fIy \fB== \fIx \fB-\fR (\fIx \fB% \fIy\fR)
+(\fIx \fB/ \fIy\fR) \fB* \fIy \fB== \fIx \fB\-\fR (\fIx \fB% \fIy\fR)
 .CE
 .RE
 .TP
diff --git a/doc/packagens.n b/doc/packagens.n
index 1220b20..30617a3 100644
--- a/doc/packagens.n
+++ b/doc/packagens.n
@@ -9,7 +9,7 @@
 .SH NAME
 pkg::create \- Construct an appropriate 'package ifneeded' command for a given package specification
 .SH SYNOPSIS
-\fB::pkg::create \fI\-name packageName\fR \fI\-version packageVersion\fR ?\fI\-load filespec\fR? ... ?\fI\-source filespec\fR? ...
+\fB::pkg::create\fR \fB\-name \fIpackageName \fB\-version \fIpackageVersion\fR ?\fB\-load \fIfilespec\fR? ... ?\fB\-source \fIfilespec\fR? ...
 .BE
 
 .SH DESCRIPTION
@@ -22,13 +22,13 @@ command for a given package specification.  It can be used to construct a
 .SH OPTIONS
 The parameters supported are:
 .TP
-\fB\-name\fR\0\fIpackageName\fR
+\fB\-name \fIpackageName\fR
 This parameter specifies the name of the package.  It is required.
 .TP
-\fB\-version\fR\0\fIpackageVersion\fR
+\fB\-version \fIpackageVersion\fR
 This parameter specifies the version of the package.  It is required.
 .TP
-\fB\-load\fR\0\fIfilespec\fR
+\fB\-load \fIfilespec\fR
 This parameter specifies a binary library that must be loaded with the
 \fBload\fR command.  \fIfilespec\fR is a list with two elements.  The
 first element is the name of the file to load.  The second, optional
@@ -37,7 +37,7 @@ list of procedures is empty or omitted, \fB::pkg::create\fR will
 set up the library for direct loading (see \fBpkg_mkIndex\fR).  Any
 number of \fB\-load\fR parameters may be specified.
 .TP
-\fB\-source\fR\0\fIfilespec\fR
+\fB\-source \fIfilespec\fR
 This parameter is similar to the \fB\-load\fR parameter, except that it
 specifies a Tcl library that must be loaded with the
 \fBsource\fR command.  Any number of \fB\-source\fR parameters may be
diff --git a/doc/pkgMkIndex.n b/doc/pkgMkIndex.n
index 07370ef..2753208 100644
--- a/doc/pkgMkIndex.n
+++ b/doc/pkgMkIndex.n
@@ -153,7 +153,7 @@ commands for each version of each available package;  these commands
 invoke \fBpackage provide\fR commands to announce the
 availability of the package, and they setup auto-loader
 information to load the files of the package.
-If the \fI\-lazy\fR flag was provided when the \fBpkgIndex.tcl\fR
+If the \fB\-lazy\fR flag was provided when the \fBpkgIndex.tcl\fR
 was generated,
 a given file of a given version of a given package is not
 actually loaded until the first time one of its commands
@@ -168,7 +168,7 @@ commands or those which require special initialization, might select
 that their package files be loaded immediately upon \fBpackage require\fR
 instead of delaying the actual loading to the first use of one of the
 package's command. This is the default mode when generating the package
-index.  It can be overridden by specifying the \fI\-lazy\fR argument.
+index.  It can be overridden by specifying the \fB\-lazy\fR argument.
 .SH "COMPLEX CASES"
 Most complex cases of dependencies among scripts
 and binary files, and packages being split among scripts and
diff --git a/doc/socket.n b/doc/socket.n
index 9c9366d..e2c4759 100644
--- a/doc/socket.n
+++ b/doc/socket.n
@@ -169,8 +169,8 @@ identical to the address, the first element of the list.
 For server sockets this option returns a list of a multiple of three
 elements each group of which have the same meaning as described
 above. The list contains more than one group when the server socket
-was created without \fB-myaddr\fR or with the argument to
-\fB-myaddr\fR being a domain name that resolves multiple IP addresses
+was created without \fB\-myaddr\fR or with the argument to
+\fB\-myaddr\fR being a domain name that resolves multiple IP addresses
 that are local to the invoking host.
 
 .TP
diff --git a/doc/tcltest.n b/doc/tcltest.n
index 5977013..731bed7 100644
--- a/doc/tcltest.n
+++ b/doc/tcltest.n
@@ -32,7 +32,7 @@ tcltest \- Test harness support code and utilities
 
 \fBtcltest::configure\fR
 \fBtcltest::configure \fI\-option\fR
-\fBtcltest::configure \fI\-option value\fR ?\fI-option value ...\fR?
+\fBtcltest::configure \fI\-option value\fR ?\fI\-option value ...\fR?
 \fBtcltest::customMatch \fImode command\fR
 \fBtcltest::testConstraint \fIconstraint\fR ?\fIvalue\fR?
 \fBtcltest::outputChannel \fR?\fIchannelID\fR?
@@ -90,7 +90,7 @@ of how to use the commands of \fBtcltest\fR to produce test suites
 for your Tcl-enabled code.
 .SH COMMANDS
 .TP
-\fBtest\fR \fIname description\fR ?\fI-option value ...\fR?
+\fBtest\fR \fIname description\fR ?\fI\-option value ...\fR?
 .
 Defines and possibly runs a test with the name \fIname\fR and
 description \fIdescription\fR.  The name and description of a test
diff --git a/doc/unset.n b/doc/unset.n
index b86407a..64b334d 100644
--- a/doc/unset.n
+++ b/doc/unset.n
@@ -13,7 +13,7 @@
 .SH NAME
 unset \- Delete variables
 .SH SYNOPSIS
-\fBunset \fR?\fI\-nocomplain\fR? ?\fI\-\-\fR? ?\fIname name name ...\fR?
+\fBunset \fR?\fB\-nocomplain\fR? ?\fB\-\-\fR? ?\fIname name name ...\fR?
 .BE
 .SH DESCRIPTION
 .PP
@@ -25,9 +25,9 @@ element is removed without affecting the rest of the array.
 If a \fIname\fR consists of an array name with no parenthesized
 index, then the entire array is deleted.
 The \fBunset\fR command returns an empty string as result.
-If \fI\-nocomplain\fR is specified as the first argument, any possible
+If \fB\-nocomplain\fR is specified as the first argument, any possible
 errors are suppressed.  The option may not be abbreviated, in order to
-disambiguate it from possible variable names.  The option \fI\-\-\fR
+disambiguate it from possible variable names.  The option \fB\-\-\fR
 indicates the end of the options, and should be used if you wish to
 remove a variable with the same name as any of the options.
 If an error occurs during variable deletion, any variables after the named one