Fix problems in for.test

1 files changed, 62 insertions, 74 deletions

diff --git a/generic/tclCompile.c b/generic/tclCompile.c
index a150fc2..dcd74f1 100644
--- a/generic/tclCompile.c
+++ b/generic/tclCompile.c
@@ -1755,7 +1755,6 @@ CompileExpanded(
     int wordIdx = 0;
     DefineLineInformation;
 
-
     StartExpanding(envPtr);
     if (cmdObj) {
 	CompileCmdLiteral(interp, cmdObj, envPtr);
@@ -1787,19 +1786,17 @@ CompileExpanded(
     }
 
     /*
-     * The stack depth during argument expansion can only be
-     * managed at runtime, as the number of elements in the
-     * expanded lists is not known at compile time. We adjust here
-     * the stack depth estimate so that it is correct after the
-     * command with expanded arguments returns.
+     * The stack depth during argument expansion can only be managed at
+     * runtime, as the number of elements in the expanded lists is not known
+     * at compile time. We adjust here the stack depth estimate so that it is
+     * correct after the command with expanded arguments returns.
      *
-     * The end effect of this command's invocation is that all the
-     * words of the command are popped from the stack, and the
-     * result is pushed: the stack top changes by (1-wordIdx).
+     * The end effect of this command's invocation is that all the words of
+     * the command are popped from the stack, and the result is pushed: the
+     * stack top changes by (1-wordIdx).
      *
-     * Note that the estimates are not correct while the command
-     * is being prepared and run, INST_EXPAND_STKTOP is not
-     * stack-neutral in general.
+     * Note that the estimates are not correct while the command is being
+     * prepared and run, INST_EXPAND_STKTOP is not stack-neutral in general.
      */
 
     TclEmitInvoke(envPtr, INST_INVOKE_EXPANDED, wordIdx);
@@ -1816,8 +1813,8 @@ CompileCmdCompileProc(
     DefineLineInformation;
 
     /*
-     * Emit of the INST_START_CMD instruction is controlled by
-     * the value of envPtr->atCmdStart:
+     * Emit of the INST_START_CMD instruction is controlled by the value of
+     * envPtr->atCmdStart:
      *
      * atCmdStart == 2	: We are not using the INST_START_CMD instruction.
      * atCmdStart == 1	: INST_START_CMD was the last instruction emitted.
@@ -1848,9 +1845,10 @@ CompileCmdCompileProc(
     if (TCL_OK == TclAttemptCompileProc(interp, parsePtr, 1, cmdPtr, envPtr)) {
 	if (incrOffset >= 0) {
 	    /*
-	     * We successfully compiled a command.  Increment the number
-	     * of commands that start at the currently active INST_START_CMD.
+	     * We successfully compiled a command.  Increment the number of
+	     * commands that start at the currently active INST_START_CMD.
 	     */
+
 	    unsigned char *incrPtr = envPtr->codeStart + incrOffset;
 	    unsigned char *startPtr = incrPtr - 5;
 
@@ -1866,9 +1864,9 @@ CompileCmdCompileProc(
     envPtr->codeNext -= unwind; /* Unwind INST_START_CMD */
 
     /*
-     * Throw out any line information generated by the failed
-     * compile attempt.
+     * Throw out any line information generated by the failed compile attempt.
      */
+
     while (mapPtr->nuloc - 1 > eclIndex) {
 	mapPtr->nuloc--;
 	ckfree(mapPtr->loc[mapPtr->nuloc].line);
@@ -1876,11 +1874,11 @@ CompileCmdCompileProc(
     }
 
     /*
-     * Reset the index of next command.
-     * Toss out any from failed nested partial compiles.
+     * Reset the index of next command.  Toss out any from failed nested
+     * partial compiles.
      */
-    envPtr->numCommands = mapPtr->nuloc;
 
+    envPtr->numCommands = mapPtr->nuloc;
     return TCL_ERROR;
 }
 
@@ -1912,11 +1910,10 @@ CompileCommandTokens(
 	    parsePtr->commandStart - envPtr->source, startCodeOffset);
 
     /*
-     * TIP #280. Scan the words and compute the extended location
-     * information. The map first contain full per-word line
-     * information for use by the compiler. This is later replaced by
-     * a reduced form which signals non-literal words, stored in
-     * 'wlines'.
+     * TIP #280. Scan the words and compute the extended location information.
+     * The map first contain full per-word line information for use by the
+     * compiler. This is later replaced by a reduced form which signals
+     * non-literal words, stored in 'wlines'.
      */
 
     EnterCmdWordData(eclPtr, parsePtr->commandStart - envPtr->source,
@@ -1938,8 +1935,8 @@ CompileCommandTokens(
 	cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, cmdObj);
 	if (cmdPtr) {
 	    /*
-	     * Found a command.  Test the ways we can be told
-	     * not to attempt to compile it.
+	     * Found a command.  Test the ways we can be told not to attempt
+	     * to compile it.
 	     */
 	    if ((cmdPtr->compileProc == NULL)
 		    || (cmdPtr->nsPtr->flags & NS_SUPPRESS_COMPILATION)
@@ -1983,8 +1980,8 @@ CompileCommandTokens(
 	    (envPtr->codeNext-envPtr->codeStart) - startCodeOffset);
 
     /*
-     * TIP #280: Free full form of per-word line data and insert the
-     * reduced form now
+     * TIP #280: Free full form of per-word line data and insert the reduced
+     * form now
      */
 
     envPtr->line = cmdLine;
@@ -2069,20 +2066,20 @@ TclCompileScript(
 
 	if (parse.numWords == 0) {
 	    /*
-	     * The "command" parsed has no words.  In this case
-	     * we can skip the rest of the loop body.  With no words,
-	     * clearly CompileCommandTokens() has nothing to do.  Since
-	     * the parser aggressively sucks up leading comment and white
-	     * space, including newlines, parse.commandStart must be 
-	     * pointing at either the end of script, or a command-terminating
-	     * semi-colon.  In either case, the TclAdvance*() calls have
-	     * nothing to do.  Finally, when no words are parsed, no
-	     * tokens have been allocated at parse.tokenPtr so there's
-	     * also nothing for Tcl_FreeParse() to do.
+	     * The "command" parsed has no words.  In this case we can skip
+	     * the rest of the loop body.  With no words, clearly
+	     * CompileCommandTokens() has nothing to do.  Since the parser
+	     * aggressively sucks up leading comment and white space,
+	     * including newlines, parse.commandStart must be pointing at
+	     * either the end of script, or a command-terminating semi-colon.
+	     * In either case, the TclAdvance*() calls have nothing to do.
+	     * Finally, when no words are parsed, no tokens have been
+	     * allocated at parse.tokenPtr so there's also nothing for
+	     * Tcl_FreeParse() to do.
 	     *
 	     * The advantage of this shortcut is that CompileCommandTokens()
-	     * can be written with an assumption that parse.numWords > 0,
-	     * with the implication the CCT() always generates bytecode.
+	     * can be written with an assumption that parse.numWords > 0, with
+	     * the implication the CCT() always generates bytecode.
 	     */
 	    continue;
 	}
@@ -2101,23 +2098,25 @@ TclCompileScript(
 
     if (lastCmdIdx == -1) {
 	/*
-	 * Compiling the script yielded no bytecode.  The script must be
-	 * all whitespace, comments, and empty commands.  Such scripts
-	 * are defined to successfully produce the empty string result,
-	 * so we emit the simple bytecode that makes that happen.
+	 * Compiling the script yielded no bytecode.  The script must be all
+	 * whitespace, comments, and empty commands.  Such scripts are defined
+	 * to successfully produce the empty string result, so we emit the
+	 * simple bytecode that makes that happen.
 	 */
+
 	PushStringLiteral(envPtr, "");
     } else {
 	/*
 	 * We compiled at least one command to bytecode.  The routine
 	 * CompileCommandTokens() follows the bytecode of each compiled
-	 * command with an INST_POP, so that stack balance is maintained
-	 * when several commands are in sequence.  (The result of each
-	 * command is thrown away before moving on to the next command).
-	 * For the last command compiled, we need to undo that INST_POP
-	 * so that the result of the last command becomes the result of
-	 * the script.  The code here removes that trailing INST_POP.
+	 * command with an INST_POP, so that stack balance is maintained when
+	 * several commands are in sequence.  (The result of each command is
+	 * thrown away before moving on to the next command).  For the last
+	 * command compiled, we need to undo that INST_POP so that the result
+	 * of the last command becomes the result of the script.  The code
+	 * here removes that trailing INST_POP.
 	 */
+
 	envPtr->cmdMapPtr[lastCmdIdx].numCodeBytes--;
 	envPtr->codeNext--;
 	envPtr->currStackDepth++;
@@ -3353,9 +3352,9 @@ TclAddLoopContinueFixup(
  *
  * TclCleanupStackForBreakContinue --
  *
- *	Ditch the extra elements from the auxiliary stack and the main
- *	stack. How to do this exactly depends on whether there are any
- *	elements on the auxiliary stack to pop.
+ *	Ditch the extra elements from the auxiliary stack and the main stack.
+ *	How to do this exactly depends on whether there are any elements on
+ *	the auxiliary stack to pop.
  *
  * ---------------------------------------------------------------------
  */
@@ -3369,23 +3368,16 @@ TclCleanupStackForBreakContinue(
     int toPop = envPtr->expandCount - auxPtr->expandTarget;
 
     if (toPop > 0) {
-	while (toPop > 0) {
+	while (toPop --> 0) {
 	    TclEmitOpcode(INST_EXPAND_DROP, envPtr);
-	    toPop--;
 	}
 	TclAdjustStackDepth(auxPtr->expandTargetDepth - envPtr->currStackDepth,
 		envPtr);
-	toPop = auxPtr->expandTargetDepth - auxPtr->stackDepth;
-	while (toPop > 0) {
-	    TclEmitOpcode(INST_POP, envPtr);
-	    toPop--;
-	}
-    } else {
-	toPop = envPtr->currStackDepth - auxPtr->stackDepth;
-	while (toPop > 0) {
-	    TclEmitOpcode(INST_POP, envPtr);
-	    toPop--;
-	}
+	envPtr->currStackDepth = auxPtr->expandTargetDepth;
+    }
+    toPop = envPtr->currStackDepth - auxPtr->stackDepth;
+    while (toPop --> 0) {
+	TclEmitOpcode(INST_POP, envPtr);
     }
     envPtr->currStackDepth = savedStackDepth;
 }
@@ -4062,11 +4054,9 @@ TclEmitInvoke(
 
 	if (auxBreakPtr != NULL) {
 	    TclAdjustStackDepth(-1, envPtr);
-	    exceptAux->stackDepth = auxBreakPtr->stackDepth;
-	    exceptAux->expandTarget = auxBreakPtr->expandTarget;
 
 	    ExceptionRangeTarget(envPtr, loopRange, breakOffset);
-	    TclCleanupStackForBreakContinue(envPtr, exceptAux);
+	    TclCleanupStackForBreakContinue(envPtr, auxBreakPtr);
 	    TclAddLoopBreakFixup(envPtr, auxBreakPtr);
 
 	    envPtr->currStackDepth = savedStackDepth;
@@ -4075,11 +4065,9 @@ TclEmitInvoke(
 
 	if (auxContinuePtr != NULL) {
 	    TclAdjustStackDepth(-1, envPtr);
-	    exceptAux->stackDepth = auxContinuePtr->stackDepth;
-	    exceptAux->expandTarget = auxContinuePtr->expandTarget;
 
 	    ExceptionRangeTarget(envPtr, loopRange, continueOffset);
-	    TclCleanupStackForBreakContinue(envPtr, exceptAux);
+	    TclCleanupStackForBreakContinue(envPtr, auxContinuePtr);
 	    TclAddLoopContinueFixup(envPtr, auxContinuePtr);
 
 	    envPtr->currStackDepth = savedStackDepth;