Code reorganisation: moving all eval functions from tclParse.c to tclBasic.c

2 files changed, 905 insertions, 907 deletions

diff --git a/generic/tclBasic.c b/generic/tclBasic.c
index edb8bb6..fc5e49e 100644
--- a/generic/tclBasic.c
+++ b/generic/tclBasic.c
@@ -3,7 +3,7 @@
  *
  *	Contains the basic facilities for TCL command interpretation,
  *	including interpreter creation and deletion, command creation
- *	and deletion, and command parsing and execution.
+ *	and deletion, and command/script execution. 
  *
  * Copyright (c) 1987-1994 The Regents of the University of California.
  * Copyright (c) 1994-1997 Sun Microsystems, Inc.
@@ -13,7 +13,7 @@
  * See the file "license.terms" for information on usage and redistribution
  * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
  *
- * RCS: @(#) $Id: tclBasic.c,v 1.37 2001/11/16 20:01:04 msofer Exp $
+ * RCS: @(#) $Id: tclBasic.c,v 1.38 2001/11/19 17:30:27 msofer Exp $
  */
 
 #include "tclInt.h"
@@ -2723,6 +2723,907 @@ Tcl_ListMathFuncs(interp, pattern)
 /*
  *----------------------------------------------------------------------
  *
+ * TclEvalObjvInternal --
+ *
+ *	This procedure evaluates a Tcl command that has already been
+ *	parsed into words, with one Tcl_Obj holding each word.
+ *
+ * Results:
+ *	The return value is a standard Tcl completion code such as
+ *	TCL_OK or TCL_ERROR.  A result or error message is left in
+ *	interp's result.  If an error occurs, this procedure does
+ *	NOT add any information to the errorInfo variable.
+ *
+ * Side effects:
+ *	Depends on the command.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+TclEvalObjvInternal(interp, objc, objv, command, length, flags)
+    Tcl_Interp *interp;		/* Interpreter in which to evaluate the
+				 * command.  Also used for error
+				 * reporting. */
+    int objc;			/* Number of words in command. */
+    Tcl_Obj *CONST objv[];	/* An array of pointers to objects that are
+				 * the words that make up the command. */
+    char *command;		/* Points to the beginning of the string
+				 * representation of the command; this
+				 * is used for traces.  If the string
+				 * representation of the command is
+				 * unknown, an empty string should be
+				 * supplied. If it is NULL, no traces will
+				 * be called. */
+    int length;			/* Number of bytes in command; if -1, all
+				 * characters up to the first null byte are
+				 * used. */
+    int flags;			/* Collection of OR-ed bits that control
+				 * the evaluation of the script.  Only
+				 * TCL_EVAL_GLOBAL is currently
+				 * supported. */
+
+{
+    Command *cmdPtr;
+    Interp *iPtr = (Interp *) interp;
+    Tcl_Obj **newObjv;
+    int i, code;
+    Trace *tracePtr, *nextPtr;
+    char **argv, *commandCopy;
+    CallFrame *savedVarFramePtr;	/* Saves old copy of iPtr->varFramePtr
+					 * in case TCL_EVAL_GLOBAL was set. */
+
+    Tcl_ResetResult(interp);
+    if (objc == 0) {
+	return TCL_OK;
+    }
+
+    /*
+     * If the interpreter was deleted, return an error.
+     */
+    
+    if (iPtr->flags & DELETED) {
+	Tcl_AppendToObj(Tcl_GetObjResult(interp),
+		"attempt to call eval in deleted interpreter", -1);
+	Tcl_SetErrorCode(interp, "CORE", "IDELETE",
+		"attempt to call eval in deleted interpreter",
+		(char *) NULL);
+	return TCL_ERROR;
+    }
+
+    /*
+     * Check depth of nested calls to Tcl_Eval:  if this gets too large,
+     * it's probably because of an infinite loop somewhere.
+     */
+
+    if (iPtr->numLevels >= iPtr->maxNestingDepth) {
+	iPtr->result =  "too many nested calls to Tcl_Eval (infinite loop?)";
+	return TCL_ERROR;
+    }
+    iPtr->numLevels++;
+
+    /*
+     * On the Mac, we will never reach the default recursion limit before
+     * blowing the stack. So we need to do a check here.
+     */
+    
+    if (TclpCheckStackSpace() == 0) {
+	/*NOTREACHED*/
+	iPtr->numLevels--;
+	iPtr->result =  "too many nested calls to Tcl_Eval (infinite loop?)";
+	return TCL_ERROR;
+    }
+    
+    /*
+     * Find the procedure to execute this command. If there isn't one,
+     * then see if there is a command "unknown".  If so, create a new
+     * word array with "unknown" as the first word and the original
+     * command words as arguments.  Then call ourselves recursively
+     * to execute it.
+     */
+    
+    cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, objv[0]);
+    if (cmdPtr == NULL) {
+	newObjv = (Tcl_Obj **) ckalloc((unsigned)
+		((objc + 1) * sizeof (Tcl_Obj *)));
+	for (i = objc-1; i >= 0; i--) {
+	    newObjv[i+1] = objv[i];
+	}
+	newObjv[0] = Tcl_NewStringObj("::unknown", -1);
+	Tcl_IncrRefCount(newObjv[0]);
+	cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, newObjv[0]);
+	if (cmdPtr == NULL) {
+	    Tcl_AppendStringsToObj(Tcl_GetObjResult(interp),
+		    "invalid command name \"", Tcl_GetString(objv[0]), "\"",
+		    (char *) NULL);
+	    code = TCL_ERROR;
+	} else {
+	    code = TclEvalObjvInternal(interp, objc+1, newObjv, command, length, 0);
+	}
+	Tcl_DecrRefCount(newObjv[0]);
+	ckfree((char *) newObjv);
+	goto done;
+    }
+    
+    /*
+     * Call trace procedures if needed.
+     */
+
+    if (command != NULL) {
+	argv = NULL;
+	commandCopy = command;
+
+	for (tracePtr = iPtr->tracePtr; tracePtr != NULL; tracePtr = nextPtr) {
+	    nextPtr = tracePtr->nextPtr;
+	    if (iPtr->numLevels > tracePtr->level) {
+		continue;
+	    }
+
+	    /*
+	     * This is a bit messy because we have to emulate the old trace
+	     * interface, which uses strings for everything.
+	     */
+	    
+	    if (argv == NULL) {
+		argv = (char **) ckalloc((unsigned) (objc + 1) * sizeof(char *));
+		for (i = 0; i < objc; i++) {
+		    argv[i] = Tcl_GetString(objv[i]);
+		}
+		argv[objc] = 0;
+		
+		if (length < 0) {
+		    length = strlen(command);
+		} else if ((size_t)length < strlen(command)) {
+		    commandCopy = (char *) ckalloc((unsigned) (length + 1));
+		    strncpy(commandCopy, command, (size_t) length);
+		    commandCopy[length] = 0;
+		}
+	    }
+	    (*tracePtr->proc)(tracePtr->clientData, interp, iPtr->numLevels,
+			  commandCopy, cmdPtr->proc, cmdPtr->clientData,
+			  objc, argv);
+	}
+	if (argv != NULL) {
+	    ckfree((char *) argv);
+	}
+	if (commandCopy != command) {
+	    ckfree((char *) commandCopy);
+	}
+    }
+    
+    /*
+     * Finally, invoke the command's Tcl_ObjCmdProc.
+     */
+    
+    iPtr->cmdCount++;
+    savedVarFramePtr = iPtr->varFramePtr;
+    if (flags & TCL_EVAL_GLOBAL) {
+	iPtr->varFramePtr = NULL;
+    }
+    code = (*cmdPtr->objProc)(cmdPtr->objClientData, interp, objc, objv);
+    iPtr->varFramePtr = savedVarFramePtr;
+    if (Tcl_AsyncReady()) {
+	code = Tcl_AsyncInvoke(interp, code);
+    }
+
+    /*
+     * If the interpreter has a non-empty string result, the result
+     * object is either empty or stale because some procedure set
+     * interp->result directly. If so, move the string result to the
+     * result object, then reset the string result.
+     */
+    
+    if (*(iPtr->result) != 0) {
+	(void) Tcl_GetObjResult(interp);
+    }
+
+    done:
+    iPtr->numLevels--;
+    return code;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_EvalObjv --
+ *
+ *	This procedure evaluates a Tcl command that has already been
+ *	parsed into words, with one Tcl_Obj holding each word.
+ *
+ * Results:
+ *	The return value is a standard Tcl completion code such as
+ *	TCL_OK or TCL_ERROR.  A result or error message is left in
+ *	interp's result.
+ *
+ * Side effects:
+ *	Depends on the command.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+Tcl_EvalObjv(interp, objc, objv, flags)
+    Tcl_Interp *interp;		/* Interpreter in which to evaluate the
+				 * command.  Also used for error
+				 * reporting. */
+    int objc;			/* Number of words in command. */
+    Tcl_Obj *CONST objv[];	/* An array of pointers to objects that are
+				 * the words that make up the command. */
+    int flags;			/* Collection of OR-ed bits that control
+				 * the evaluation of the script.  Only
+				 * TCL_EVAL_GLOBAL is currently
+				 * supported. */
+{
+    Interp *iPtr = (Interp *)interp;
+    Trace *tracePtr;
+    Tcl_DString cmdBuf;
+    char *cmdString = "";
+    int cmdLen = 0;
+    int code = TCL_OK;
+
+    for (tracePtr = iPtr->tracePtr; tracePtr; tracePtr = tracePtr->nextPtr) {
+	/*
+	 * EvalObjv will increment numLevels so use "<" rather than "<="
+	 */
+	if (iPtr->numLevels < tracePtr->level) {
+	    int i;
+	    /*
+	     * The command will be needed for an execution trace or stack trace
+	     * generate a command string.
+	     */
+	cmdtraced:
+	    Tcl_DStringInit(&cmdBuf);
+	    for (i = 0; i < objc; i++) {
+		Tcl_DStringAppendElement(&cmdBuf, Tcl_GetString(objv[i]));
+	    }
+	    cmdString = Tcl_DStringValue(&cmdBuf);
+	    cmdLen = Tcl_DStringLength(&cmdBuf);
+	    break;
+	}
+    }
+
+    /*
+     * Execute the command if we have not done so already
+     */
+    switch (code) {
+	case TCL_OK:
+	    code = TclEvalObjvInternal(interp, objc, objv, cmdString, cmdLen, flags);
+	    if (code == TCL_ERROR && cmdLen == 0)
+		goto cmdtraced;
+	    break;
+	case TCL_ERROR:
+	    Tcl_LogCommandInfo(interp, cmdString, cmdString, cmdLen);
+	    break;
+	default:
+	    /*NOTREACHED*/
+	    break;
+    }
+
+    if (cmdLen != 0) {
+	Tcl_DStringFree(&cmdBuf);
+    }
+    return code;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_LogCommandInfo --
+ *
+ *	This procedure is invoked after an error occurs in an interpreter.
+ *	It adds information to the "errorInfo" variable to describe the
+ *	command that was being executed when the error occurred.
+ *
+ * Results:
+ *	None.
+ *
+ * Side effects:
+ *	Information about the command is added to errorInfo and the
+ *	line number stored internally in the interpreter is set.  If this
+ *	is the first call to this procedure or Tcl_AddObjErrorInfo since
+ *	an error occurred, then old information in errorInfo is
+ *	deleted.
+ *
+ *----------------------------------------------------------------------
+ */
+
+void
+Tcl_LogCommandInfo(interp, script, command, length)
+    Tcl_Interp *interp;		/* Interpreter in which to log information. */
+    char *script;		/* First character in script containing
+				 * command (must be <= command). */
+    char *command;		/* First character in command that
+				 * generated the error. */
+    int length;			/* Number of bytes in command (-1 means
+				 * use all bytes up to first null byte). */
+{
+    char buffer[200];
+    register char *p;
+    char *ellipsis = "";
+    Interp *iPtr = (Interp *) interp;
+
+    if (iPtr->flags & ERR_ALREADY_LOGGED) {
+	/*
+	 * Someone else has already logged error information for this
+	 * command; we shouldn't add anything more.
+	 */
+
+	return;
+    }
+
+    /*
+     * Compute the line number where the error occurred.
+     */
+
+    iPtr->errorLine = 1;
+    for (p = script; p != command; p++) {
+	if (*p == '\n') {
+	    iPtr->errorLine++;
+	}
+    }
+
+    /*
+     * Create an error message to add to errorInfo, including up to a
+     * maximum number of characters of the command.
+     */
+
+    if (length < 0) {
+	length = strlen(command);
+    }
+    if (length > 150) {
+	length = 150;
+	ellipsis = "...";
+    }
+    if (!(iPtr->flags & ERR_IN_PROGRESS)) {
+	sprintf(buffer, "\n    while executing\n\"%.*s%s\"",
+		length, command, ellipsis);
+    } else {
+	sprintf(buffer, "\n    invoked from within\n\"%.*s%s\"",
+		length, command, ellipsis);
+    }
+    Tcl_AddObjErrorInfo(interp, buffer, -1);
+    iPtr->flags &= ~ERR_ALREADY_LOGGED;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_EvalTokensStandard --
+ *
+ *	Given an array of tokens parsed from a Tcl command (e.g., the
+ *	tokens that make up a word or the index for an array variable)
+ *	this procedure evaluates the tokens and concatenates their
+ *	values to form a single result value.
+ * 
+ * Results:
+ *	The return value is a standard Tcl completion code such as
+ *	TCL_OK or TCL_ERROR.  A result or error message is left in
+ *	interp's result.
+ *
+ * Side effects:
+ *	Depends on the array of tokens being evaled.
+  *
+ *----------------------------------------------------------------------
+ */
+
+int
+Tcl_EvalTokensStandard(interp, tokenPtr, count)
+    Tcl_Interp *interp;		/* Interpreter in which to lookup
+				 * variables, execute nested commands,
+				 * and report errors. */
+    Tcl_Token *tokenPtr;	/* Pointer to first in an array of tokens
+				 * to evaluate and concatenate. */
+    int count;			/* Number of tokens to consider at tokenPtr.
+				 * Must be at least 1. */
+{
+    Tcl_Obj *resultPtr, *indexPtr, *valuePtr, *newPtr;
+    char buffer[TCL_UTF_MAX];
+#ifdef TCL_MEM_DEBUG
+#   define  MAX_VAR_CHARS 5
+#else
+#   define  MAX_VAR_CHARS 30
+#endif
+    char nameBuffer[MAX_VAR_CHARS+1];
+    char *varName, *index;
+    char *p = NULL;		/* Initialized to avoid compiler warning. */
+    int length, code;
+
+    /*
+     * The only tricky thing about this procedure is that it attempts to
+     * avoid object creation and string copying whenever possible.  For
+     * example, if the value is just a nested command, then use the
+     * command's result object directly.
+     */
+
+    code = TCL_OK;
+    resultPtr = NULL;
+    Tcl_ResetResult(interp);
+    for ( ; count > 0; count--, tokenPtr++) {
+	valuePtr = NULL;
+
+	/*
+	 * The switch statement below computes the next value to be
+	 * concat to the result, as either a range of text or an
+	 * object.
+	 */
+
+	switch (tokenPtr->type) {
+	    case TCL_TOKEN_TEXT:
+		p = tokenPtr->start;
+		length = tokenPtr->size;
+		break;
+
+	    case TCL_TOKEN_BS:
+		length = Tcl_UtfBackslash(tokenPtr->start, (int *) NULL,
+			buffer);
+		p = buffer;
+		break;
+
+	    case TCL_TOKEN_COMMAND:
+		code = Tcl_EvalEx(interp, tokenPtr->start+1, tokenPtr->size-2,
+			0);
+		if (code != TCL_OK) {
+		    goto done;
+		}
+		valuePtr = Tcl_GetObjResult(interp);
+		break;
+
+	    case TCL_TOKEN_VARIABLE:
+		if (tokenPtr->numComponents == 1) {
+		    indexPtr = NULL;
+		    index = NULL;
+		} else {
+		    code = Tcl_EvalTokensStandard(interp, tokenPtr+2,
+			    tokenPtr->numComponents - 1);
+		    if (code != TCL_OK) {
+			goto done;
+		    }
+		    indexPtr = Tcl_GetObjResult(interp);
+		    Tcl_IncrRefCount(indexPtr);
+		    index = Tcl_GetString(indexPtr);
+		}
+
+		/*
+		 * We have to make a copy of the variable name in order
+		 * to have a null-terminated string.  We can't make a
+		 * temporary modification to the script to null-terminate
+		 * the name, because a trace callback might potentially
+		 * reuse the script and be affected by the null character.
+		 */
+
+		if (tokenPtr[1].size <= MAX_VAR_CHARS) {
+		    varName = nameBuffer;
+		} else {
+		    varName = ckalloc((unsigned) (tokenPtr[1].size + 1));
+		}
+		strncpy(varName, tokenPtr[1].start, (size_t) tokenPtr[1].size);
+		varName[tokenPtr[1].size] = 0;
+		valuePtr = Tcl_GetVar2Ex(interp, varName, index,
+			TCL_LEAVE_ERR_MSG);
+		if (varName != nameBuffer) {
+		    ckfree(varName);
+		}
+		if (indexPtr != NULL) {
+		    Tcl_DecrRefCount(indexPtr);
+		}
+		if (valuePtr == NULL) {
+		    code = TCL_ERROR;
+		    goto done;
+		}
+		count -= tokenPtr->numComponents;
+		tokenPtr += tokenPtr->numComponents;
+		break;
+
+	    default:
+		panic("unexpected token type in Tcl_EvalTokensStandard");
+	}
+
+	/*
+	 * If valuePtr isn't NULL, the next piece of text comes from that
+	 * object; otherwise, take length bytes starting at p.
+	 */
+
+	if (resultPtr == NULL) {
+	    if (valuePtr != NULL) {
+		resultPtr = valuePtr;
+	    } else {
+		resultPtr = Tcl_NewStringObj(p, length);
+	    }
+	    Tcl_IncrRefCount(resultPtr);
+	} else {
+	    if (Tcl_IsShared(resultPtr)) {
+		newPtr = Tcl_DuplicateObj(resultPtr);
+		Tcl_DecrRefCount(resultPtr);
+		resultPtr = newPtr;
+		Tcl_IncrRefCount(resultPtr);
+	    }
+	    if (valuePtr != NULL) {
+		p = Tcl_GetStringFromObj(valuePtr, &length);
+	    }
+	    Tcl_AppendToObj(resultPtr, p, length);
+	}
+    }
+    if (resultPtr != NULL) {
+	Tcl_SetObjResult(interp, resultPtr);
+	Tcl_DecrRefCount(resultPtr);
+    } else {
+	code = TCL_ERROR;
+    }
+
+    done:
+    return code;
+}
+
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_EvalTokens --
+ *
+ *	Given an array of tokens parsed from a Tcl command (e.g., the
+ *	tokens that make up a word or the index for an array variable)
+ *	this procedure evaluates the tokens and concatenates their
+ *	values to form a single result value.
+ *
+ * Results:
+ *	The return value is a pointer to a newly allocated Tcl_Obj
+ *	containing the value of the array of tokens.  The reference
+ *	count of the returned object has been incremented.  If an error
+ *	occurs in evaluating the tokens then a NULL value is returned
+ *	and an error message is left in interp's result.
+ *
+ * Side effects:
+ *	A new object is allocated to hold the result.
+ *
+ *----------------------------------------------------------------------
+ *
+ * This uses a non-standard return convention; its use is now deprecated.
+ * It is a wrapper for the new function Tcl_EvalTokensStandard, and is not 
+ * used in the core any longer. It is only kept for backward compatibility.
+ */
+
+Tcl_Obj *
+Tcl_EvalTokens(interp, tokenPtr, count)
+    Tcl_Interp *interp;		/* Interpreter in which to lookup
+				 * variables, execute nested commands,
+				 * and report errors. */
+    Tcl_Token *tokenPtr;	/* Pointer to first in an array of tokens
+				 * to evaluate and concatenate. */
+    int count;			/* Number of tokens to consider at tokenPtr.
+				 * Must be at least 1. */
+{
+    int code;
+    Tcl_Obj *resPtr;
+    
+    code = Tcl_EvalTokensStandard(interp, tokenPtr, count);
+    if (code == TCL_OK) {
+	resPtr = Tcl_GetObjResult(interp);
+	Tcl_IncrRefCount(resPtr);
+	Tcl_ResetResult(interp);
+	return resPtr;
+    } else {
+	return NULL;
+    }
+}
+
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_EvalEx --
+ *
+ *	This procedure evaluates a Tcl script without using the compiler
+ *	or byte-code interpreter.  It just parses the script, creates
+ *	values for each word of each command, then calls EvalObjv
+ *	to execute each command.
+ *
+ * Results:
+ *	The return value is a standard Tcl completion code such as
+ *	TCL_OK or TCL_ERROR.  A result or error message is left in
+ *	interp's result.
+ *
+ * Side effects:
+ *	Depends on the script.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+Tcl_EvalEx(interp, script, numBytes, flags)
+    Tcl_Interp *interp;		/* Interpreter in which to evaluate the
+				 * script.  Also used for error reporting. */
+    char *script;		/* First character of script to evaluate. */
+    int numBytes;		/* Number of bytes in script.  If < 0, the
+				 * script consists of all bytes up to the
+				 * first null character. */
+    int flags;			/* Collection of OR-ed bits that control
+				 * the evaluation of the script.  Only
+				 * TCL_EVAL_GLOBAL is currently
+				 * supported. */
+{
+    Interp *iPtr = (Interp *) interp;
+    char *p, *next;
+    Tcl_Parse parse;
+#define NUM_STATIC_OBJS 20
+    Tcl_Obj *staticObjArray[NUM_STATIC_OBJS], **objv;
+    Tcl_Token *tokenPtr;
+    int i, code, commandLength, bytesLeft, nested;
+    CallFrame *savedVarFramePtr;	/* Saves old copy of iPtr->varFramePtr
+					 * in case TCL_EVAL_GLOBAL was set. */
+
+    /*
+     * The variables below keep track of how much state has been
+     * allocated while evaluating the script, so that it can be freed
+     * properly if an error occurs.
+     */
+
+    int gotParse = 0, objectsUsed = 0;
+
+    if (numBytes < 0) {
+	numBytes = strlen(script);
+    }
+    Tcl_ResetResult(interp);
+
+    savedVarFramePtr = iPtr->varFramePtr;
+    if (flags & TCL_EVAL_GLOBAL) {
+	iPtr->varFramePtr = NULL;
+    }
+
+    /*
+     * Each iteration through the following loop parses the next
+     * command from the script and then executes it.
+     */
+
+    objv = staticObjArray;
+    p = script;
+    bytesLeft = numBytes;
+    if (iPtr->evalFlags & TCL_BRACKET_TERM) {
+	nested = 1;
+    } else {
+	nested = 0;
+    }
+    iPtr->evalFlags = 0;
+    do {
+	if (Tcl_ParseCommand(interp, p, bytesLeft, nested, &parse)
+	        != TCL_OK) {
+	    code = TCL_ERROR;
+	    goto error;
+	}
+	gotParse = 1; 
+	if (parse.numWords > 0) {
+	    /*
+	     * Generate an array of objects for the words of the command.
+	     */
+    
+	    if (parse.numWords <= NUM_STATIC_OBJS) {
+		objv = staticObjArray;
+	    } else {
+		objv = (Tcl_Obj **) ckalloc((unsigned)
+		    (parse.numWords * sizeof (Tcl_Obj *)));
+	    }
+	    for (objectsUsed = 0, tokenPtr = parse.tokenPtr;
+		    objectsUsed < parse.numWords;
+		    objectsUsed++, tokenPtr += (tokenPtr->numComponents + 1)) {
+		code = Tcl_EvalTokensStandard(interp, tokenPtr+1, 
+		            tokenPtr->numComponents);
+		if (code == TCL_OK) {
+		    objv[objectsUsed] = Tcl_GetObjResult(interp);
+		    Tcl_IncrRefCount(objv[objectsUsed]);
+		} else {
+		    goto error;
+		}
+	    }
+    
+	    /*
+	     * Execute the command and free the objects for its words.
+	     */
+    
+	    code = TclEvalObjvInternal(interp, objectsUsed, objv, p, bytesLeft, 0);
+	    if (code != TCL_OK) {
+		goto error;
+	    }
+	    for (i = 0; i < objectsUsed; i++) {
+		Tcl_DecrRefCount(objv[i]);
+	    }
+	    objectsUsed = 0;
+	    if (objv != staticObjArray) {
+		ckfree((char *) objv);
+		objv = staticObjArray;
+	    }
+	}
+
+	/*
+	 * Advance to the next command in the script.
+	 */
+
+	next = parse.commandStart + parse.commandSize;
+	bytesLeft -= next - p;
+	p = next;
+	Tcl_FreeParse(&parse);
+	gotParse = 0;
+	if ((nested != 0) && (p > script) && (p[-1] == ']')) {
+	    /*
+	     * We get here in the special case where the TCL_BRACKET_TERM
+	     * flag was set in the interpreter and we reached a close
+	     * bracket in the script.  Return immediately.
+	     */
+
+	    iPtr->termOffset = (p - 1) - script;
+	    iPtr->varFramePtr = savedVarFramePtr;
+	    return TCL_OK;
+	}
+    } while (bytesLeft > 0);
+    iPtr->termOffset = p - script;
+    iPtr->varFramePtr = savedVarFramePtr;
+    return TCL_OK;
+
+    error:
+    /*
+     * Generate various pieces of error information, such as the line
+     * number where the error occurred and information to add to the
+     * errorInfo variable.  Then free resources that had been allocated
+     * to the command.
+     */
+
+    if ((code == TCL_ERROR) && !(iPtr->flags & ERR_ALREADY_LOGGED)) { 
+	commandLength = parse.commandSize;
+	if ((parse.commandStart + commandLength) != (script + numBytes)) {
+	    /*
+	     * The command where the error occurred didn't end at the end
+	     * of the script (i.e. it ended at a terminator character such
+	     * as ";".  Reduce the length by one so that the error message
+	     * doesn't include the terminator character.
+	     */
+	    
+	    commandLength -= 1;
+	}
+	Tcl_LogCommandInfo(interp, script, parse.commandStart, commandLength);
+    }
+    
+    for (i = 0; i < objectsUsed; i++) {
+	Tcl_DecrRefCount(objv[i]);
+    }
+    if (gotParse) {
+	next = parse.commandStart + parse.commandSize;
+	bytesLeft -= next - p;
+	p = next;
+	Tcl_FreeParse(&parse);
+
+	if ((nested != 0) && (p > script)) {
+	    char *nextCmd = NULL;	/* pointer to start of next command */
+
+	    /*
+	     * We get here in the special case where the TCL_BRACKET_TERM
+	     * flag was set in the interpreter.
+	     *
+	     * At this point, we want to find the end of the script
+	     * (either end of script or the closing ']').
+	     */
+
+	    while ((p[-1] != ']') && bytesLeft) {
+		if (Tcl_ParseCommand(NULL, p, bytesLeft, nested, &parse)
+			!= TCL_OK) {
+		    /*
+		     * We were looking for the ']' to close the script.
+		     * But if we find a syntax error, it is ok to quit
+		     * early since in that case we no longer need to know
+		     * where the ']' is (if there was one).  We reset the
+		     * pointer to the start of the command that after the
+		     * one causing the return.  -- hobbs
+		     */
+
+		    p = (nextCmd == NULL) ? parse.commandStart : nextCmd;
+		    break;
+		}
+
+		if (nextCmd == NULL) {
+		    nextCmd = parse.commandStart;
+		}
+
+		/*
+		 * Advance to the next command in the script.
+		 */
+
+		next = parse.commandStart + parse.commandSize;
+		bytesLeft -= next - p;
+		p = next;
+		Tcl_FreeParse(&parse);
+	    }
+	    iPtr->termOffset = (p - 1) - script;
+	} else {
+	    iPtr->termOffset = p - script;
+	}    
+    }
+    if (objv != staticObjArray) {
+	ckfree((char *) objv);
+    }
+    iPtr->varFramePtr = savedVarFramePtr;
+    return code;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_Eval --
+ *
+ *	Execute a Tcl command in a string.  This procedure executes the
+ *	script directly, rather than compiling it to bytecodes.  Before
+ *	the arrival of the bytecode compiler in Tcl 8.0 Tcl_Eval was
+ *	the main procedure used for executing Tcl commands, but nowadays
+ *	it isn't used much.
+ *
+ * Results:
+ *	The return value is one of the return codes defined in tcl.h
+ *	(such as TCL_OK), and interp's result contains a value
+ *	to supplement the return code. The value of the result
+ *	will persist only until the next call to Tcl_Eval or Tcl_EvalObj:
+ *	you must copy it or lose it!
+ *
+ * Side effects:
+ *	Can be almost arbitrary, depending on the commands in the script.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+Tcl_Eval(interp, string)
+    Tcl_Interp *interp;		/* Token for command interpreter (returned
+				 * by previous call to Tcl_CreateInterp). */
+    char *string;		/* Pointer to TCL command to execute. */
+{
+    int code;
+
+    code = Tcl_EvalEx(interp, string, -1, 0);
+
+    /*
+     * For backwards compatibility with old C code that predates the
+     * object system in Tcl 8.0, we have to mirror the object result
+     * back into the string result (some callers may expect it there).
+     */
+
+    Tcl_SetResult(interp, TclGetString(Tcl_GetObjResult(interp)),
+	    TCL_VOLATILE);
+    return code;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_EvalObj, Tcl_GlobalEvalObj --
+ *
+ *	These functions are deprecated but we keep them around for backwards
+ *	compatibility reasons.
+ *
+ * Results:
+ *	See the functions they call.
+ *
+ * Side effects:
+ *	See the functions they call.
+ *
+ *----------------------------------------------------------------------
+ */
+
+#undef Tcl_EvalObj
+int
+Tcl_EvalObj(interp, objPtr)
+    Tcl_Interp * interp;
+    Tcl_Obj * objPtr;
+{
+    return Tcl_EvalObjEx(interp, objPtr, 0);
+}
+
+#undef Tcl_GlobalEvalObj
+int
+Tcl_GlobalEvalObj(interp, objPtr)
+    Tcl_Interp * interp;
+    Tcl_Obj * objPtr;
+{
+    return Tcl_EvalObjEx(interp, objPtr, TCL_EVAL_GLOBAL);
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
  * Tcl_EvalObjEx --
  *
  *	Execute Tcl commands stored in a Tcl object. These commands are
diff --git a/generic/tclParse.c b/generic/tclParse.c
index f19e4e4..ae53606 100644
--- a/generic/tclParse.c
+++ b/generic/tclParse.c
@@ -4,9 +4,7 @@
  *	This file contains procedures that parse Tcl scripts.  They
  *	do so in a general-purpose fashion that can be used for many
  *	different purposes, including compilation, direct execution,
- *	code analysis, etc.  This file also includes a few additional
- *	procedures such as Tcl_EvalObjv, Tcl_Eval, and Tcl_EvalEx, which
- *	allow scripts to be evaluated directly, without compiling.
+ *	code analysis, etc.  
  *
  * Copyright (c) 1997 Sun Microsystems, Inc.
  * Copyright (c) 1998-2000 Ajuba Solutions.
@@ -14,7 +12,7 @@
  * See the file "license.terms" for information on usage and redistribution
  * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
  *
- * RCS: @(#) $Id: tclParse.c,v 1.17 2001/11/16 20:01:04 msofer Exp $
+ * RCS: @(#) $Id: tclParse.c,v 1.18 2001/11/19 17:30:27 msofer Exp $
  */
 
 #include "tclInt.h"
@@ -752,907 +750,6 @@ TclExpandTokenArray(parsePtr)
 /*
  *----------------------------------------------------------------------
  *
- * TclEvalObjvInternal --
- *
- *	This procedure evaluates a Tcl command that has already been
- *	parsed into words, with one Tcl_Obj holding each word.
- *
- * Results:
- *	The return value is a standard Tcl completion code such as
- *	TCL_OK or TCL_ERROR.  A result or error message is left in
- *	interp's result.  If an error occurs, this procedure does
- *	NOT add any information to the errorInfo variable.
- *
- * Side effects:
- *	Depends on the command.
- *
- *----------------------------------------------------------------------
- */
-
-int
-TclEvalObjvInternal(interp, objc, objv, command, length, flags)
-    Tcl_Interp *interp;		/* Interpreter in which to evaluate the
-				 * command.  Also used for error
-				 * reporting. */
-    int objc;			/* Number of words in command. */
-    Tcl_Obj *CONST objv[];	/* An array of pointers to objects that are
-				 * the words that make up the command. */
-    char *command;		/* Points to the beginning of the string
-				 * representation of the command; this
-				 * is used for traces.  If the string
-				 * representation of the command is
-				 * unknown, an empty string should be
-				 * supplied. If it is NULL, no traces will
-				 * be called. */
-    int length;			/* Number of bytes in command; if -1, all
-				 * characters up to the first null byte are
-				 * used. */
-    int flags;			/* Collection of OR-ed bits that control
-				 * the evaluation of the script.  Only
-				 * TCL_EVAL_GLOBAL is currently
-				 * supported. */
-
-{
-    Command *cmdPtr;
-    Interp *iPtr = (Interp *) interp;
-    Tcl_Obj **newObjv;
-    int i, code;
-    Trace *tracePtr, *nextPtr;
-    char **argv, *commandCopy;
-    CallFrame *savedVarFramePtr;	/* Saves old copy of iPtr->varFramePtr
-					 * in case TCL_EVAL_GLOBAL was set. */
-
-    Tcl_ResetResult(interp);
-    if (objc == 0) {
-	return TCL_OK;
-    }
-
-    /*
-     * If the interpreter was deleted, return an error.
-     */
-    
-    if (iPtr->flags & DELETED) {
-	Tcl_AppendToObj(Tcl_GetObjResult(interp),
-		"attempt to call eval in deleted interpreter", -1);
-	Tcl_SetErrorCode(interp, "CORE", "IDELETE",
-		"attempt to call eval in deleted interpreter",
-		(char *) NULL);
-	return TCL_ERROR;
-    }
-
-    /*
-     * Check depth of nested calls to Tcl_Eval:  if this gets too large,
-     * it's probably because of an infinite loop somewhere.
-     */
-
-    if (iPtr->numLevels >= iPtr->maxNestingDepth) {
-	iPtr->result =  "too many nested calls to Tcl_Eval (infinite loop?)";
-	return TCL_ERROR;
-    }
-    iPtr->numLevels++;
-
-    /*
-     * On the Mac, we will never reach the default recursion limit before
-     * blowing the stack. So we need to do a check here.
-     */
-    
-    if (TclpCheckStackSpace() == 0) {
-	/*NOTREACHED*/
-	iPtr->numLevels--;
-	iPtr->result =  "too many nested calls to Tcl_Eval (infinite loop?)";
-	return TCL_ERROR;
-    }
-    
-    /*
-     * Find the procedure to execute this command. If there isn't one,
-     * then see if there is a command "unknown".  If so, create a new
-     * word array with "unknown" as the first word and the original
-     * command words as arguments.  Then call ourselves recursively
-     * to execute it.
-     */
-    
-    cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, objv[0]);
-    if (cmdPtr == NULL) {
-	newObjv = (Tcl_Obj **) ckalloc((unsigned)
-		((objc + 1) * sizeof (Tcl_Obj *)));
-	for (i = objc-1; i >= 0; i--) {
-	    newObjv[i+1] = objv[i];
-	}
-	newObjv[0] = Tcl_NewStringObj("::unknown", -1);
-	Tcl_IncrRefCount(newObjv[0]);
-	cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, newObjv[0]);
-	if (cmdPtr == NULL) {
-	    Tcl_AppendStringsToObj(Tcl_GetObjResult(interp),
-		    "invalid command name \"", Tcl_GetString(objv[0]), "\"",
-		    (char *) NULL);
-	    code = TCL_ERROR;
-	} else {
-	    code = TclEvalObjvInternal(interp, objc+1, newObjv, command, length, 0);
-	}
-	Tcl_DecrRefCount(newObjv[0]);
-	ckfree((char *) newObjv);
-	goto done;
-    }
-    
-    /*
-     * Call trace procedures if needed.
-     */
-
-    if (command != NULL) {
-	argv = NULL;
-	commandCopy = command;
-
-	for (tracePtr = iPtr->tracePtr; tracePtr != NULL; tracePtr = nextPtr) {
-	    nextPtr = tracePtr->nextPtr;
-	    if (iPtr->numLevels > tracePtr->level) {
-		continue;
-	    }
-
-	    /*
-	     * This is a bit messy because we have to emulate the old trace
-	     * interface, which uses strings for everything.
-	     */
-	    
-	    if (argv == NULL) {
-		argv = (char **) ckalloc((unsigned) (objc + 1) * sizeof(char *));
-		for (i = 0; i < objc; i++) {
-		    argv[i] = Tcl_GetString(objv[i]);
-		}
-		argv[objc] = 0;
-		
-		if (length < 0) {
-		    length = strlen(command);
-		} else if ((size_t)length < strlen(command)) {
-		    commandCopy = (char *) ckalloc((unsigned) (length + 1));
-		    strncpy(commandCopy, command, (size_t) length);
-		    commandCopy[length] = 0;
-		}
-	    }
-	    (*tracePtr->proc)(tracePtr->clientData, interp, iPtr->numLevels,
-			  commandCopy, cmdPtr->proc, cmdPtr->clientData,
-			  objc, argv);
-	}
-	if (argv != NULL) {
-	    ckfree((char *) argv);
-	}
-	if (commandCopy != command) {
-	    ckfree((char *) commandCopy);
-	}
-    }
-    
-    /*
-     * Finally, invoke the command's Tcl_ObjCmdProc.
-     */
-    
-    iPtr->cmdCount++;
-    savedVarFramePtr = iPtr->varFramePtr;
-    if (flags & TCL_EVAL_GLOBAL) {
-	iPtr->varFramePtr = NULL;
-    }
-    code = (*cmdPtr->objProc)(cmdPtr->objClientData, interp, objc, objv);
-    iPtr->varFramePtr = savedVarFramePtr;
-    if (Tcl_AsyncReady()) {
-	code = Tcl_AsyncInvoke(interp, code);
-    }
-
-    /*
-     * If the interpreter has a non-empty string result, the result
-     * object is either empty or stale because some procedure set
-     * interp->result directly. If so, move the string result to the
-     * result object, then reset the string result.
-     */
-    
-    if (*(iPtr->result) != 0) {
-	(void) Tcl_GetObjResult(interp);
-    }
-
-    done:
-    iPtr->numLevels--;
-    return code;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_EvalObjv --
- *
- *	This procedure evaluates a Tcl command that has already been
- *	parsed into words, with one Tcl_Obj holding each word.
- *
- * Results:
- *	The return value is a standard Tcl completion code such as
- *	TCL_OK or TCL_ERROR.  A result or error message is left in
- *	interp's result.
- *
- * Side effects:
- *	Depends on the command.
- *
- *----------------------------------------------------------------------
- */
-
-int
-Tcl_EvalObjv(interp, objc, objv, flags)
-    Tcl_Interp *interp;		/* Interpreter in which to evaluate the
-				 * command.  Also used for error
-				 * reporting. */
-    int objc;			/* Number of words in command. */
-    Tcl_Obj *CONST objv[];	/* An array of pointers to objects that are
-				 * the words that make up the command. */
-    int flags;			/* Collection of OR-ed bits that control
-				 * the evaluation of the script.  Only
-				 * TCL_EVAL_GLOBAL is currently
-				 * supported. */
-{
-    Interp *iPtr = (Interp *)interp;
-    Trace *tracePtr;
-    Tcl_DString cmdBuf;
-    char *cmdString = "";
-    int cmdLen = 0;
-    int code = TCL_OK;
-
-    for (tracePtr = iPtr->tracePtr; tracePtr; tracePtr = tracePtr->nextPtr) {
-	/*
-	 * EvalObjv will increment numLevels so use "<" rather than "<="
-	 */
-	if (iPtr->numLevels < tracePtr->level) {
-	    int i;
-	    /*
-	     * The command will be needed for an execution trace or stack trace
-	     * generate a command string.
-	     */
-	cmdtraced:
-	    Tcl_DStringInit(&cmdBuf);
-	    for (i = 0; i < objc; i++) {
-		Tcl_DStringAppendElement(&cmdBuf, Tcl_GetString(objv[i]));
-	    }
-	    cmdString = Tcl_DStringValue(&cmdBuf);
-	    cmdLen = Tcl_DStringLength(&cmdBuf);
-	    break;
-	}
-    }
-
-    /*
-     * Execute the command if we have not done so already
-     */
-    switch (code) {
-	case TCL_OK:
-	    code = TclEvalObjvInternal(interp, objc, objv, cmdString, cmdLen, flags);
-	    if (code == TCL_ERROR && cmdLen == 0)
-		goto cmdtraced;
-	    break;
-	case TCL_ERROR:
-	    Tcl_LogCommandInfo(interp, cmdString, cmdString, cmdLen);
-	    break;
-	default:
-	    /*NOTREACHED*/
-	    break;
-    }
-
-    if (cmdLen != 0) {
-	Tcl_DStringFree(&cmdBuf);
-    }
-    return code;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_LogCommandInfo --
- *
- *	This procedure is invoked after an error occurs in an interpreter.
- *	It adds information to the "errorInfo" variable to describe the
- *	command that was being executed when the error occurred.
- *
- * Results:
- *	None.
- *
- * Side effects:
- *	Information about the command is added to errorInfo and the
- *	line number stored internally in the interpreter is set.  If this
- *	is the first call to this procedure or Tcl_AddObjErrorInfo since
- *	an error occurred, then old information in errorInfo is
- *	deleted.
- *
- *----------------------------------------------------------------------
- */
-
-void
-Tcl_LogCommandInfo(interp, script, command, length)
-    Tcl_Interp *interp;		/* Interpreter in which to log information. */
-    char *script;		/* First character in script containing
-				 * command (must be <= command). */
-    char *command;		/* First character in command that
-				 * generated the error. */
-    int length;			/* Number of bytes in command (-1 means
-				 * use all bytes up to first null byte). */
-{
-    char buffer[200];
-    register char *p;
-    char *ellipsis = "";
-    Interp *iPtr = (Interp *) interp;
-
-    if (iPtr->flags & ERR_ALREADY_LOGGED) {
-	/*
-	 * Someone else has already logged error information for this
-	 * command; we shouldn't add anything more.
-	 */
-
-	return;
-    }
-
-    /*
-     * Compute the line number where the error occurred.
-     */
-
-    iPtr->errorLine = 1;
-    for (p = script; p != command; p++) {
-	if (*p == '\n') {
-	    iPtr->errorLine++;
-	}
-    }
-
-    /*
-     * Create an error message to add to errorInfo, including up to a
-     * maximum number of characters of the command.
-     */
-
-    if (length < 0) {
-	length = strlen(command);
-    }
-    if (length > 150) {
-	length = 150;
-	ellipsis = "...";
-    }
-    if (!(iPtr->flags & ERR_IN_PROGRESS)) {
-	sprintf(buffer, "\n    while executing\n\"%.*s%s\"",
-		length, command, ellipsis);
-    } else {
-	sprintf(buffer, "\n    invoked from within\n\"%.*s%s\"",
-		length, command, ellipsis);
-    }
-    Tcl_AddObjErrorInfo(interp, buffer, -1);
-    iPtr->flags &= ~ERR_ALREADY_LOGGED;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_EvalTokensStandard --
- *
- *	Given an array of tokens parsed from a Tcl command (e.g., the
- *	tokens that make up a word or the index for an array variable)
- *	this procedure evaluates the tokens and concatenates their
- *	values to form a single result value.
- * 
- * Results:
- *	The return value is a standard Tcl completion code such as
- *	TCL_OK or TCL_ERROR.  A result or error message is left in
- *	interp's result.
- *
- * Side effects:
- *	Depends on the array of tokens being evaled.
-  *
- *----------------------------------------------------------------------
- */
-
-int
-Tcl_EvalTokensStandard(interp, tokenPtr, count)
-    Tcl_Interp *interp;		/* Interpreter in which to lookup
-				 * variables, execute nested commands,
-				 * and report errors. */
-    Tcl_Token *tokenPtr;	/* Pointer to first in an array of tokens
-				 * to evaluate and concatenate. */
-    int count;			/* Number of tokens to consider at tokenPtr.
-				 * Must be at least 1. */
-{
-    Tcl_Obj *resultPtr, *indexPtr, *valuePtr, *newPtr;
-    char buffer[TCL_UTF_MAX];
-#ifdef TCL_MEM_DEBUG
-#   define  MAX_VAR_CHARS 5
-#else
-#   define  MAX_VAR_CHARS 30
-#endif
-    char nameBuffer[MAX_VAR_CHARS+1];
-    char *varName, *index;
-    char *p = NULL;		/* Initialized to avoid compiler warning. */
-    int length, code;
-
-    /*
-     * The only tricky thing about this procedure is that it attempts to
-     * avoid object creation and string copying whenever possible.  For
-     * example, if the value is just a nested command, then use the
-     * command's result object directly.
-     */
-
-    code = TCL_OK;
-    resultPtr = NULL;
-    Tcl_ResetResult(interp);
-    for ( ; count > 0; count--, tokenPtr++) {
-	valuePtr = NULL;
-
-	/*
-	 * The switch statement below computes the next value to be
-	 * concat to the result, as either a range of text or an
-	 * object.
-	 */
-
-	switch (tokenPtr->type) {
-	    case TCL_TOKEN_TEXT:
-		p = tokenPtr->start;
-		length = tokenPtr->size;
-		break;
-
-	    case TCL_TOKEN_BS:
-		length = Tcl_UtfBackslash(tokenPtr->start, (int *) NULL,
-			buffer);
-		p = buffer;
-		break;
-
-	    case TCL_TOKEN_COMMAND:
-		code = Tcl_EvalEx(interp, tokenPtr->start+1, tokenPtr->size-2,
-			0);
-		if (code != TCL_OK) {
-		    goto done;
-		}
-		valuePtr = Tcl_GetObjResult(interp);
-		break;
-
-	    case TCL_TOKEN_VARIABLE:
-		if (tokenPtr->numComponents == 1) {
-		    indexPtr = NULL;
-		    index = NULL;
-		} else {
-		    code = Tcl_EvalTokensStandard(interp, tokenPtr+2,
-			    tokenPtr->numComponents - 1);
-		    if (code != TCL_OK) {
-			goto done;
-		    }
-		    indexPtr = Tcl_GetObjResult(interp);
-		    Tcl_IncrRefCount(indexPtr);
-		    index = Tcl_GetString(indexPtr);
-		}
-
-		/*
-		 * We have to make a copy of the variable name in order
-		 * to have a null-terminated string.  We can't make a
-		 * temporary modification to the script to null-terminate
-		 * the name, because a trace callback might potentially
-		 * reuse the script and be affected by the null character.
-		 */
-
-		if (tokenPtr[1].size <= MAX_VAR_CHARS) {
-		    varName = nameBuffer;
-		} else {
-		    varName = ckalloc((unsigned) (tokenPtr[1].size + 1));
-		}
-		strncpy(varName, tokenPtr[1].start, (size_t) tokenPtr[1].size);
-		varName[tokenPtr[1].size] = 0;
-		valuePtr = Tcl_GetVar2Ex(interp, varName, index,
-			TCL_LEAVE_ERR_MSG);
-		if (varName != nameBuffer) {
-		    ckfree(varName);
-		}
-		if (indexPtr != NULL) {
-		    Tcl_DecrRefCount(indexPtr);
-		}
-		if (valuePtr == NULL) {
-		    code = TCL_ERROR;
-		    goto done;
-		}
-		count -= tokenPtr->numComponents;
-		tokenPtr += tokenPtr->numComponents;
-		break;
-
-	    default:
-		panic("unexpected token type in Tcl_EvalTokensStandard");
-	}
-
-	/*
-	 * If valuePtr isn't NULL, the next piece of text comes from that
-	 * object; otherwise, take length bytes starting at p.
-	 */
-
-	if (resultPtr == NULL) {
-	    if (valuePtr != NULL) {
-		resultPtr = valuePtr;
-	    } else {
-		resultPtr = Tcl_NewStringObj(p, length);
-	    }
-	    Tcl_IncrRefCount(resultPtr);
-	} else {
-	    if (Tcl_IsShared(resultPtr)) {
-		newPtr = Tcl_DuplicateObj(resultPtr);
-		Tcl_DecrRefCount(resultPtr);
-		resultPtr = newPtr;
-		Tcl_IncrRefCount(resultPtr);
-	    }
-	    if (valuePtr != NULL) {
-		p = Tcl_GetStringFromObj(valuePtr, &length);
-	    }
-	    Tcl_AppendToObj(resultPtr, p, length);
-	}
-    }
-    if (resultPtr != NULL) {
-	Tcl_SetObjResult(interp, resultPtr);
-	Tcl_DecrRefCount(resultPtr);
-    } else {
-	code = TCL_ERROR;
-    }
-
-    done:
-    return code;
-}
-
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_EvalTokens --
- *
- *	Given an array of tokens parsed from a Tcl command (e.g., the
- *	tokens that make up a word or the index for an array variable)
- *	this procedure evaluates the tokens and concatenates their
- *	values to form a single result value.
- *
- * Results:
- *	The return value is a pointer to a newly allocated Tcl_Obj
- *	containing the value of the array of tokens.  The reference
- *	count of the returned object has been incremented.  If an error
- *	occurs in evaluating the tokens then a NULL value is returned
- *	and an error message is left in interp's result.
- *
- * Side effects:
- *	A new object is allocated to hold the result.
- *
- *----------------------------------------------------------------------
- *
- * This uses a non-standard return convention; its use is now deprecated.
- * It is a wrapper for the new function Tcl_EvalTokensStandard, and is not 
- * used in the core any longer. It is only kept for backward compatibility.
- */
-
-Tcl_Obj *
-Tcl_EvalTokens(interp, tokenPtr, count)
-    Tcl_Interp *interp;		/* Interpreter in which to lookup
-				 * variables, execute nested commands,
-				 * and report errors. */
-    Tcl_Token *tokenPtr;	/* Pointer to first in an array of tokens
-				 * to evaluate and concatenate. */
-    int count;			/* Number of tokens to consider at tokenPtr.
-				 * Must be at least 1. */
-{
-    int code;
-    Tcl_Obj *resPtr;
-    
-    code = Tcl_EvalTokensStandard(interp, tokenPtr, count);
-    if (code == TCL_OK) {
-	resPtr = Tcl_GetObjResult(interp);
-	Tcl_IncrRefCount(resPtr);
-	Tcl_ResetResult(interp);
-	return resPtr;
-    } else {
-	return NULL;
-    }
-}
-
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_EvalEx --
- *
- *	This procedure evaluates a Tcl script without using the compiler
- *	or byte-code interpreter.  It just parses the script, creates
- *	values for each word of each command, then calls EvalObjv
- *	to execute each command.
- *
- * Results:
- *	The return value is a standard Tcl completion code such as
- *	TCL_OK or TCL_ERROR.  A result or error message is left in
- *	interp's result.
- *
- * Side effects:
- *	Depends on the script.
- *
- *----------------------------------------------------------------------
- */
-
-int
-Tcl_EvalEx(interp, script, numBytes, flags)
-    Tcl_Interp *interp;		/* Interpreter in which to evaluate the
-				 * script.  Also used for error reporting. */
-    char *script;		/* First character of script to evaluate. */
-    int numBytes;		/* Number of bytes in script.  If < 0, the
-				 * script consists of all bytes up to the
-				 * first null character. */
-    int flags;			/* Collection of OR-ed bits that control
-				 * the evaluation of the script.  Only
-				 * TCL_EVAL_GLOBAL is currently
-				 * supported. */
-{
-    Interp *iPtr = (Interp *) interp;
-    char *p, *next;
-    Tcl_Parse parse;
-#define NUM_STATIC_OBJS 20
-    Tcl_Obj *staticObjArray[NUM_STATIC_OBJS], **objv;
-    Tcl_Token *tokenPtr;
-    int i, code, commandLength, bytesLeft, nested;
-    CallFrame *savedVarFramePtr;	/* Saves old copy of iPtr->varFramePtr
-					 * in case TCL_EVAL_GLOBAL was set. */
-
-    /*
-     * The variables below keep track of how much state has been
-     * allocated while evaluating the script, so that it can be freed
-     * properly if an error occurs.
-     */
-
-    int gotParse = 0, objectsUsed = 0;
-
-    if (numBytes < 0) {
-	numBytes = strlen(script);
-    }
-    Tcl_ResetResult(interp);
-
-    savedVarFramePtr = iPtr->varFramePtr;
-    if (flags & TCL_EVAL_GLOBAL) {
-	iPtr->varFramePtr = NULL;
-    }
-
-    /*
-     * Each iteration through the following loop parses the next
-     * command from the script and then executes it.
-     */
-
-    objv = staticObjArray;
-    p = script;
-    bytesLeft = numBytes;
-    if (iPtr->evalFlags & TCL_BRACKET_TERM) {
-	nested = 1;
-    } else {
-	nested = 0;
-    }
-    iPtr->evalFlags = 0;
-    do {
-	if (Tcl_ParseCommand(interp, p, bytesLeft, nested, &parse)
-	        != TCL_OK) {
-	    code = TCL_ERROR;
-	    goto error;
-	}
-	gotParse = 1; 
-	if (parse.numWords > 0) {
-	    /*
-	     * Generate an array of objects for the words of the command.
-	     */
-    
-	    if (parse.numWords <= NUM_STATIC_OBJS) {
-		objv = staticObjArray;
-	    } else {
-		objv = (Tcl_Obj **) ckalloc((unsigned)
-		    (parse.numWords * sizeof (Tcl_Obj *)));
-	    }
-	    for (objectsUsed = 0, tokenPtr = parse.tokenPtr;
-		    objectsUsed < parse.numWords;
-		    objectsUsed++, tokenPtr += (tokenPtr->numComponents + 1)) {
-		code = Tcl_EvalTokensStandard(interp, tokenPtr+1, 
-		            tokenPtr->numComponents);
-		if (code == TCL_OK) {
-		    objv[objectsUsed] = Tcl_GetObjResult(interp);
-		    Tcl_IncrRefCount(objv[objectsUsed]);
-		} else {
-		    goto error;
-		}
-	    }
-    
-	    /*
-	     * Execute the command and free the objects for its words.
-	     */
-    
-	    code = TclEvalObjvInternal(interp, objectsUsed, objv, p, bytesLeft, 0);
-	    if (code != TCL_OK) {
-		goto error;
-	    }
-	    for (i = 0; i < objectsUsed; i++) {
-		Tcl_DecrRefCount(objv[i]);
-	    }
-	    objectsUsed = 0;
-	    if (objv != staticObjArray) {
-		ckfree((char *) objv);
-		objv = staticObjArray;
-	    }
-	}
-
-	/*
-	 * Advance to the next command in the script.
-	 */
-
-	next = parse.commandStart + parse.commandSize;
-	bytesLeft -= next - p;
-	p = next;
-	Tcl_FreeParse(&parse);
-	gotParse = 0;
-	if ((nested != 0) && (p > script) && (p[-1] == ']')) {
-	    /*
-	     * We get here in the special case where the TCL_BRACKET_TERM
-	     * flag was set in the interpreter and we reached a close
-	     * bracket in the script.  Return immediately.
-	     */
-
-	    iPtr->termOffset = (p - 1) - script;
-	    iPtr->varFramePtr = savedVarFramePtr;
-	    return TCL_OK;
-	}
-    } while (bytesLeft > 0);
-    iPtr->termOffset = p - script;
-    iPtr->varFramePtr = savedVarFramePtr;
-    return TCL_OK;
-
-    error:
-    /*
-     * Generate various pieces of error information, such as the line
-     * number where the error occurred and information to add to the
-     * errorInfo variable.  Then free resources that had been allocated
-     * to the command.
-     */
-
-    if ((code == TCL_ERROR) && !(iPtr->flags & ERR_ALREADY_LOGGED)) { 
-	commandLength = parse.commandSize;
-	if ((parse.commandStart + commandLength) != (script + numBytes)) {
-	    /*
-	     * The command where the error occurred didn't end at the end
-	     * of the script (i.e. it ended at a terminator character such
-	     * as ";".  Reduce the length by one so that the error message
-	     * doesn't include the terminator character.
-	     */
-	    
-	    commandLength -= 1;
-	}
-	Tcl_LogCommandInfo(interp, script, parse.commandStart, commandLength);
-    }
-    
-    for (i = 0; i < objectsUsed; i++) {
-	Tcl_DecrRefCount(objv[i]);
-    }
-    if (gotParse) {
-	next = parse.commandStart + parse.commandSize;
-	bytesLeft -= next - p;
-	p = next;
-	Tcl_FreeParse(&parse);
-
-	if ((nested != 0) && (p > script)) {
-	    char *nextCmd = NULL;	/* pointer to start of next command */
-
-	    /*
-	     * We get here in the special case where the TCL_BRACKET_TERM
-	     * flag was set in the interpreter.
-	     *
-	     * At this point, we want to find the end of the script
-	     * (either end of script or the closing ']').
-	     */
-
-	    while ((p[-1] != ']') && bytesLeft) {
-		if (Tcl_ParseCommand(NULL, p, bytesLeft, nested, &parse)
-			!= TCL_OK) {
-		    /*
-		     * We were looking for the ']' to close the script.
-		     * But if we find a syntax error, it is ok to quit
-		     * early since in that case we no longer need to know
-		     * where the ']' is (if there was one).  We reset the
-		     * pointer to the start of the command that after the
-		     * one causing the return.  -- hobbs
-		     */
-
-		    p = (nextCmd == NULL) ? parse.commandStart : nextCmd;
-		    break;
-		}
-
-		if (nextCmd == NULL) {
-		    nextCmd = parse.commandStart;
-		}
-
-		/*
-		 * Advance to the next command in the script.
-		 */
-
-		next = parse.commandStart + parse.commandSize;
-		bytesLeft -= next - p;
-		p = next;
-		Tcl_FreeParse(&parse);
-	    }
-	    iPtr->termOffset = (p - 1) - script;
-	} else {
-	    iPtr->termOffset = p - script;
-	}    
-    }
-    if (objv != staticObjArray) {
-	ckfree((char *) objv);
-    }
-    iPtr->varFramePtr = savedVarFramePtr;
-    return code;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_Eval --
- *
- *	Execute a Tcl command in a string.  This procedure executes the
- *	script directly, rather than compiling it to bytecodes.  Before
- *	the arrival of the bytecode compiler in Tcl 8.0 Tcl_Eval was
- *	the main procedure used for executing Tcl commands, but nowadays
- *	it isn't used much.
- *
- * Results:
- *	The return value is one of the return codes defined in tcl.h
- *	(such as TCL_OK), and interp's result contains a value
- *	to supplement the return code. The value of the result
- *	will persist only until the next call to Tcl_Eval or Tcl_EvalObj:
- *	you must copy it or lose it!
- *
- * Side effects:
- *	Can be almost arbitrary, depending on the commands in the script.
- *
- *----------------------------------------------------------------------
- */
-
-int
-Tcl_Eval(interp, string)
-    Tcl_Interp *interp;		/* Token for command interpreter (returned
-				 * by previous call to Tcl_CreateInterp). */
-    char *string;		/* Pointer to TCL command to execute. */
-{
-    int code;
-
-    code = Tcl_EvalEx(interp, string, -1, 0);
-
-    /*
-     * For backwards compatibility with old C code that predates the
-     * object system in Tcl 8.0, we have to mirror the object result
-     * back into the string result (some callers may expect it there).
-     */
-
-    Tcl_SetResult(interp, TclGetString(Tcl_GetObjResult(interp)),
-	    TCL_VOLATILE);
-    return code;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_EvalObj, Tcl_GlobalEvalObj --
- *
- *	These functions are deprecated but we keep them around for backwards
- *	compatibility reasons.
- *
- * Results:
- *	See the functions they call.
- *
- * Side effects:
- *	See the functions they call.
- *
- *----------------------------------------------------------------------
- */
-
-#undef Tcl_EvalObj
-int
-Tcl_EvalObj(interp, objPtr)
-    Tcl_Interp * interp;
-    Tcl_Obj * objPtr;
-{
-    return Tcl_EvalObjEx(interp, objPtr, 0);
-}
-
-#undef Tcl_GlobalEvalObj
-int
-Tcl_GlobalEvalObj(interp, objPtr)
-    Tcl_Interp * interp;
-    Tcl_Obj * objPtr;
-{
-    return Tcl_EvalObjEx(interp, objPtr, TCL_EVAL_GLOBAL);
-}
-
-/*
- *----------------------------------------------------------------------
- *
  * Tcl_ParseVarName --
  *
  *	Given a string starting with a $ sign, parse off a variable