diff options
| author | rjohnson <rjohnson> | 1998-03-26 14:56:55 (GMT) |
|---|---|---|
| committer | rjohnson <rjohnson> | 1998-03-26 14:56:55 (GMT) |
| commit | 72d823b9193f9ee2b0318563b49363cd08c11f24 (patch) | |
| tree | c168cc164a71f320db9dcdfe7518ba7bd0d2c8d9 /tests | |
| parent | 2b5738da524e944cda39e24c0a87b745a43bd8c3 (diff) | |
| download | tcl-72d823b9193f9ee2b0318563b49363cd08c11f24.zip tcl-72d823b9193f9ee2b0318563b49363cd08c11f24.tar.gz tcl-72d823b9193f9ee2b0318563b49363cd08c11f24.tar.bz2 | |
Initial revision
Diffstat (limited to 'tests')
98 files changed, 40308 insertions, 0 deletions
diff --git a/tests/README b/tests/README new file mode 100644 index 0000000..7dce2a2 --- /dev/null +++ b/tests/README @@ -0,0 +1,96 @@ +Tcl Test Suite +-------------- + +SCCS: @(#) README 1.6 96/04/17 10:51:11 + +This directory contains a set of validation tests for the Tcl +commands. Each of the files whose name ends in ".test" is +intended to fully exercise one or a few Tcl commands. The +commands tested by a given file are listed in the first line +of the file. + +You can run the tests in two ways: + (a) type "make test" in ../unix; this will run all of the tests. + (b) start up tcltest in this directory, then "source" the test + file (for example, type "source parse.test"). To run all + of the tests, type "source all". +In either case no output will be generated if all goes well, except +for a listing of the tests.. If there are errors then additional +messages will appear in the format described below. Note: don't +run the tests as superuser, since this will cause several of the tests +to fail. + +The rest of this file provides additional information on the +features of the testing environment. + +This approach to testing was designed and initially implemented +by Mary Ann May-Pumphrey of Sun Microsystems. Many thanks to +her for donating her work back to the public Tcl release. + +Definitions file: +----------------- + +The file "defs" defines a collection of procedures and variables +used to run the tests. It is read in automatically by each of the +.test files if needed, but once it has been read once it will not +be read again by the .test files. If you change defs while running +tests you'll have to "source" it by hand to load its new contents. + +Test output: +------------ + +Normally, output only appears when there are errors. However, if +the variable VERBOSE is set to 1 then tests will be run in "verbose" +mode and output will be generated for each test regardless of +whether it succeeded or failed. Test output consists of the +following information: + + - the test identifier (which can be used to locate the test code + in the .test file) + - a brief description of the test + - the contents of the test code + - the actual results produced by the tests + - a "PASSED" or "FAILED" message + - the expected results (if the test failed) + +You can set VERBOSE either interactively (after the defs file has been +read in), or you can change the default value in "defs". + +Selecting tests for execution: +------------------------------ + +Normally, all the tests in a file are run whenever the file is +"source"d. However, you can select a specific set of tests using +the global variable TESTS. This variable contains a pattern; any +test whose identifier matches TESTS will be run. For example, +the following interactive command causes all of the "for" tests in +groups 2 and 4 to be executed: + + set TESTS {for-[24]*} + +TESTS defaults to *, but you can change the default in "defs" if +you wish. + +Saving keystrokes: +------------------ + +A convenience procedure named "dotests" is included in file +"defs". It takes two arguments--the name of the test file (such +as "parse.test"), and a pattern selecting the tests you want to +execute. It sets TESTS to the second argument, calls "source" on +the file specified in the first argument, and restores TESTS to +its pre-call value at the end. + +Batch vs. interactive execution: +-------------------------------- + +The tests can be run in either batch or interactive mode. Batch +mode refers to using I/O redirection from a UNIX shell. For example, +the following command causes the tests in the file named "parse.test" +to be executed: + + tclTest < parse.test > parse.test.results + +Users who want to execute the tests in this fashion need to first +ensure that the file "defs" has proper values for the global +variables that control the testing environment (VERBOSE and TESTS). diff --git a/tests/all b/tests/all new file mode 100644 index 0000000..4023e55 --- /dev/null +++ b/tests/all @@ -0,0 +1,22 @@ +# This file contains a top-level script to run all of the Tcl +# tests. Execute it by invoking "source all" when running tclTest +# in this directory. +# +# SCCS: @(#) all 1.8 97/08/01 11:07:14 + +if {$tcl_platform(os) == "Win32s"} { + set files [glob *.tes] +} else { + set files [glob *.test] +} + +foreach i [lsort $files] { + if [string match l.*.test $i] { + # This is an SCCS lock file; ignore it. + continue + } + puts stdout $i + if [catch {source $i} msg] { + puts $msg + } +} diff --git a/tests/append.test b/tests/append.test new file mode 100644 index 0000000..f89ade5 --- /dev/null +++ b/tests/append.test @@ -0,0 +1,174 @@ +# Commands covered: append lappend +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) append.test 1.17 97/10/28 15:45:52 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {unset x} +test append-1.1 {append command} { + catch {unset x} + list [append x 1 2 abc "long string"] $x +} {{12abclong string} {12abclong string}} +test append-1.2 {append command} { + set x "" + list [append x first] [append x second] [append x third] $x +} {first firstsecond firstsecondthird firstsecondthird} +test append-1.3 {append command} { + set x "abcd" + append x +} abcd + +test append-2.1 {long appends} { + set x "" + for {set i 0} {$i < 1000} {set i [expr $i+1]} { + append x "foobar " + } + set y "foobar" + set y "$y $y $y $y $y $y $y $y $y $y" + set y "$y $y $y $y $y $y $y $y $y $y" + set y "$y $y $y $y $y $y $y $y $y $y " + expr {$x == $y} +} 1 + +test append-3.1 {append errors} { + list [catch {append} msg] $msg +} {1 {wrong # args: should be "append varName ?value value ...?"}} +test append-3.2 {append errors} { + set x "" + list [catch {append x(0) 44} msg] $msg +} {1 {can't set "x(0)": variable isn't array}} +test append-3.3 {append errors} { + catch {unset x} + list [catch {append x} msg] $msg +} {1 {can't read "x": no such variable}} + +test append-4.1 {lappend command} { + catch {unset x} + list [lappend x 1 2 abc "long string"] $x +} {{1 2 abc {long string}} {1 2 abc {long string}}} +test append-4.2 {lappend command} { + set x "" + list [lappend x first] [lappend x second] [lappend x third] $x +} {first {first second} {first second third} {first second third}} +test append-4.3 {lappend command} { + proc foo {} { + global x + set x old + unset x + lappend x new + } + set result [foo] + rename foo {} + set result +} {new} +test append-4.4 {lappend command} { + set x {} + lappend x \{\ abc +} {\{\ abc} +test append-4.5 {lappend command} { + set x {} + lappend x \{ abc +} {\{ abc} +test append-4.6 {lappend command} { + set x {1 2 3} + lappend x +} {1 2 3} +test append-4.7 {lappend command} { + set x "a\{" + lappend x abc +} "a\\\{ abc" +test append-4.8 {lappend command} { + set x "\\\{" + lappend x abc +} "\\{ abc" +test append-4.9 {lappend command} { + set x " \{" + list [catch {lappend x abc} msg] $msg +} {1 {unmatched open brace in list}} +test append-4.10 {lappend command} { + set x " \{" + list [catch {lappend x abc} msg] $msg +} {1 {unmatched open brace in list}} +test append-4.11 {lappend command} { + set x "\{\{\{" + list [catch {lappend x abc} msg] $msg +} {1 {unmatched open brace in list}} +test append-4.12 {lappend command} { + set x "x \{\{\{" + list [catch {lappend x abc} msg] $msg +} {1 {unmatched open brace in list}} +test append-4.13 {lappend command} { + set x "x\{\{\{" + lappend x abc +} "x\\\{\\\{\\\{ abc" +test append-4.14 {lappend command} { + set x " " + lappend x abc +} "abc" +test append-4.15 {lappend command} { + set x "\\ " + lappend x abc +} "{ } abc" +test append-4.16 {lappend command} { + set x "x " + lappend x abc +} "x abc" +test append-4.17 {lappend command} { + catch {unset x} + lappend x +} {} + +proc check {var size} { + set l [llength $var] + if {$l != $size} { + return "length mismatch: should have been $size, was $l" + } + for {set i 0} {$i < $size} {set i [expr $i+1]} { + set j [lindex $var $i] + if {$j != "item $i"} { + return "element $i should have been \"item $i\", was \"$j\"" + } + } + return ok +} +test append-5.1 {long lappends} { + set x "" + for {set i 0} {$i < 300} {set i [expr $i+1]} { + lappend x "item $i" + } + check $x 300 +} ok + +test append-6.1 {lappend errors} { + list [catch {lappend} msg] $msg +} {1 {wrong # args: should be "lappend varName ?value value ...?"}} +test append-6.2 {lappend errors} { + set x "" + list [catch {lappend x(0) 44} msg] $msg +} {1 {can't set "x(0)": variable isn't array}} + +test append-7.1 {lappend-created var and error in trace on that var} { + catch {rename foo ""} + catch {unset x} + trace variable x w foo + proc foo {} {global x; unset x} + catch {lappend x 1} + proc foo {args} {global x; unset x} + info exists x + set x + lappend x 1 + list [info exists x] [catch {set x} msg] $msg +} {0 1 {can't read "x": no such variable}} + +catch {unset x} +catch {rename foo ""} diff --git a/tests/assocd.test b/tests/assocd.test new file mode 100644 index 0000000..20e8223 --- /dev/null +++ b/tests/assocd.test @@ -0,0 +1,57 @@ +# This file tests the AssocData facility of Tcl +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1994 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# "@(#) assocd.test 1.5 95/08/02 17:11:37" + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {[string compare testsetassocdata [info commands testsetassocdata]] != 0} { + puts "This application hasn't been compiled with the tests for assocData," + puts "therefore I am skipping all of these tests." + return +} + +test assocd-1.1 {testing setting assoc data} { + testsetassocdata a 1 +} "" +test assocd-1.2 {testing setting assoc data} { + testsetassocdata a 2 +} "" +test assocd-1.3 {testing setting assoc data} { + testsetassocdata 123 456 +} "" +test assocd-1.4 {testing setting assoc data} { + testsetassocdata abc "abc d e f" +} "" + +test assocd-2.1 {testing getting assoc data} { + testgetassocdata a +} 2 +test assocd-2.2 {testing getting assoc data} { + testgetassocdata 123 +} 456 +test assocd-2.3 {testing getting assoc data} { + testgetassocdata abc +} {abc d e f} +test assocd-2.4 {testing getting assoc data} { + testgetassocdata xxx +} "" + +test assocd-3.1 {testing deleting assoc data} { + testdelassocdata a +} "" +test assocd-3.2 {testing deleting assoc data} { + testdelassocdata 123 +} "" +test assocd-3.3 {testing deleting assoc data} { + list [catch {testdelassocdata nonexistent} msg] $msg +} {0 {}} diff --git a/tests/async.test b/tests/async.test new file mode 100644 index 0000000..cfc572c --- /dev/null +++ b/tests/async.test @@ -0,0 +1,131 @@ +# Commands covered: none +# +# This file contains a collection of tests for Tcl_AsyncCreate and related +# library procedures. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) async.test 1.5 96/04/05 15:29:38 + +if {[info commands testasync] == {}} { + puts "This application hasn't been compiled with the \"testasync\"" + puts "command, so I can't test Tcl_AsyncCreate et al." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +proc async1 {result code} { + global aresult acode + set aresult $result + set acode $code + return "new result" +} +proc async2 {result code} { + global aresult acode + set aresult $result + set acode $code + return -code error "xyzzy" +} +proc async3 {result code} { + global aresult + set aresult "test pattern" + return -code $code $result +} + +set handler1 [testasync create async1] +set handler2 [testasync create async2] +set handler3 [testasync create async3] +test async-1.1 {basic async handlers} { + set aresult xxx + set acode yyy + list [catch {testasync mark $handler1 "original" 0} msg] $msg \ + $acode $aresult +} {0 {new result} 0 original} +test async-1.2 {basic async handlers} { + set aresult xxx + set acode yyy + list [catch {testasync mark $handler1 "original" 1} msg] $msg \ + $acode $aresult +} {0 {new result} 1 original} +test async-1.3 {basic async handlers} { + set aresult xxx + set acode yyy + list [catch {testasync mark $handler2 "old" 0} msg] $msg \ + $acode $aresult +} {1 xyzzy 0 old} +test async-1.4 {basic async handlers} { + set aresult xxx + set acode yyy + list [catch {testasync mark $handler2 "old" 3} msg] $msg \ + $acode $aresult +} {1 xyzzy 3 old} +test async-1.5 {basic async handlers} { + set aresult xxx + list [catch {testasync mark $handler3 "foobar" 0} msg] $msg $aresult +} {0 foobar {test pattern}} +test async-1.6 {basic async handlers} { + set aresult xxx + list [catch {testasync mark $handler3 "foobar" 1} msg] $msg $aresult +} {1 foobar {test pattern}} + +proc mult1 {result code} { + global x + lappend x mult1 + return -code 7 mult1 +} +set hm1 [testasync create mult1] +proc mult2 {result code} { + global x + lappend x mult2 + return -code 9 mult2 +} +set hm2 [testasync create mult2] +proc mult3 {result code} { + global x hm1 hm2 + lappend x [catch {testasync mark $hm2 serial2 0}] + lappend x [catch {testasync mark $hm1 serial1 0}] + lappend x mult3 + return -code 11 mult3 +} +set hm3 [testasync create mult3] + +test async-2.1 {multiple handlers} { + set x {} + list [catch {testasync mark $hm3 "foobar" 5} msg] $msg $x +} {9 mult2 {0 0 mult3 mult1 mult2}} + +proc del1 {result code} { + global x hm1 hm2 hm3 hm4 + lappend x [catch {testasync mark $hm3 serial2 0}] + lappend x [catch {testasync mark $hm1 serial1 0}] + lappend x [catch {testasync mark $hm4 serial1 0}] + testasync delete $hm1 + testasync delete $hm2 + testasync delete $hm3 + lappend x del1 + return -code 13 del1 +} +proc del2 {result code} { + global x + lappend x del2 + return -code 3 del2 +} +testasync delete $handler1 +testasync delete $hm2 +testasync delete $hm3 +set hm2 [testasync create del1] +set hm3 [testasync create mult2] +set hm4 [testasync create del2] + +test async-3.1 {deleting handlers} { + set x {} + list [catch {testasync mark $hm2 "foobar" 5} msg] $msg $x +} {3 del2 {0 0 0 del1 del2}} + +testasync delete diff --git a/tests/basic.test b/tests/basic.test new file mode 100644 index 0000000..502e3e5 --- /dev/null +++ b/tests/basic.test @@ -0,0 +1,399 @@ +# This file contains tests for the tclBasic.c source file. Tests appear in +# the same order as the C code that they test. The set of tests is +# currently incomplete since it currently includes only new tests for +# code changed for the addition of Tcl namespaces. Other variable- +# related tests appear in several other test files including +# assocd.test, cmdInfo.test, eval.test, expr.test, interp.test, +# and trace.test. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) basic.test 1.19 97/10/31 16:02:26 +# + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {namespace delete test_ns_basic} +catch {interp delete test_interp} +catch {rename p ""} +catch {rename q ""} +catch {rename cmd ""} +catch {unset x} + +test basic-1.1 {Tcl_CreateInterp, creates interp's global namespace} { + catch {interp delete test_interp} + interp create test_interp + interp eval test_interp { + namespace eval test_ns_basic { + proc p {} { + return [namespace current] + } + } + } + list [interp eval test_interp {test_ns_basic::p}] \ + [interp delete test_interp] +} {::test_ns_basic {}} + +test basic-2.1 {DeleteInterpProc, destroys interp's global namespace} { + catch {interp delete test_interp} + interp create test_interp + interp eval test_interp { + namespace eval test_ns_basic { + namespace export p + proc p {} { + return [namespace current] + } + } + namespace eval test_ns_2 { + namespace import ::test_ns_basic::p + variable v 27 + proc q {} { + variable v + return "[p] $v" + } + } + } + list [interp eval test_interp {test_ns_2::q}] \ + [interp eval test_interp {namespace delete ::}] \ + [catch {interp eval test_interp {set a 123}} msg] $msg \ + [interp delete test_interp] +} {{::test_ns_basic 27} {} 1 {invalid command name "set"} {}} + +test basic-3.1 {HiddenCmdsDeleteProc, invalidate cached refs to deleted hidden cmd} { + catch {interp delete test_interp} + interp create test_interp + interp eval test_interp { + proc p {} { + return 27 + } + } + interp alias {} localP test_interp p + list [interp eval test_interp {p}] \ + [localP] \ + [test_interp hide p] \ + [catch {localP} msg] $msg \ + [interp delete test_interp] \ + [catch {localP} msg] $msg +} {27 27 {} 1 {invalid command name "p"} {} 1 {invalid command name "localP"}} + +# NB: More tests about hide/expose are found in interp.test + +test basic-4.1 {Tcl_HideCommand, names of hidden cmds can't have namespace qualifiers} { + catch {interp delete test_interp} + interp create test_interp + interp eval test_interp { + namespace eval test_ns_basic { + proc p {} { + return [namespace current] + } + } + } + list [catch {test_interp hide test_ns_basic::p x} msg] $msg \ + [catch {test_interp hide x test_ns_basic::p} msg1] $msg1 \ + [interp delete test_interp] +} {1 {can only hide global namespace commands (use rename then hide)} 1 {cannot use namespace qualifiers as hidden commandtoken (rename)} {}} + +test basic-4.2 {Tcl_HideCommand, a hidden cmd remembers its containing namespace} { + catch {namespace delete test_ns_basic} + catch {rename cmd ""} + proc cmd {} { ;# note that this is global + return [namespace current] + } + namespace eval test_ns_basic { + proc hideCmd {} { + interp hide {} cmd + } + proc exposeCmd {} { + interp expose {} cmd + } + proc callCmd {} { + cmd + } + } + list [test_ns_basic::callCmd] \ + [test_ns_basic::hideCmd] \ + [catch {cmd} msg] $msg \ + [test_ns_basic::exposeCmd] \ + [test_ns_basic::callCmd] \ + [namespace delete test_ns_basic] +} {:: {} 1 {invalid command name "cmd"} {} :: {}} + +test basic-5.1 {Tcl_ExposeCommand, a command stays in the global namespace and can not go to another namespace} { + catch {namespace delete test_ns_basic} + catch {rename cmd ""} + proc cmd {} { ;# note that this is global + return [namespace current] + } + namespace eval test_ns_basic { + proc hideCmd {} { + interp hide {} cmd + } + proc exposeCmdFailing {} { + interp expose {} cmd ::test_ns_basic::newCmd + } + proc exposeCmdWorkAround {} { + interp expose {} cmd; + rename cmd ::test_ns_basic::newCmd; + } + proc callCmd {} { + cmd + } + } + list [test_ns_basic::callCmd] \ + [test_ns_basic::hideCmd] \ + [catch {test_ns_basic::exposeCmdFailing} msg] $msg \ + [test_ns_basic::exposeCmdWorkAround] \ + [test_ns_basic::newCmd] \ + [namespace delete test_ns_basic] +} {:: {} 1 {can not expose to a namespace (use expose to toplevel, then rename)} {} ::test_ns_basic {}} +test basic-5.2 {Tcl_ExposeCommand, invalidate cached refs to cmd now being exposed} { + catch {rename p ""} + catch {rename cmd ""} + proc p {} { + cmd + } + proc cmd {} { + return 42 + } + list [p] \ + [interp hide {} cmd] \ + [proc cmd {} {return Hello}] \ + [cmd] \ + [rename cmd ""] \ + [interp expose {} cmd] \ + [p] +} {42 {} {} Hello {} {} 42} + +if {[info commands testcreatecommand] != {}} { + test basic-6.1 {Tcl_CreateCommand, new cmd goes into a namespace specified in its name, if any} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [testcreatecommand create] \ + [test_ns_basic::createdcommand] \ + [testcreatecommand delete] + } {{} {CreatedCommandProc in ::test_ns_basic} {}} + test basic-6.2 {Tcl_CreateCommand, namespace code ignore single ":"s in middle or end of names} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename value:at: ""} + list [testcreatecommand create2] \ + [value:at:] \ + [testcreatecommand delete2] + } {{} {CreatedCommandProc2 in ::} {}} +} +test basic-6.3 {Tcl_CreateObjCommand, new cmd goes into a namespace specified in its name, if any} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_basic {} + proc test_ns_basic::cmd {} { ;# proc requires that ns already exist + return [namespace current] + } + list [test_ns_basic::cmd] \ + [namespace delete test_ns_basic] +} {::test_ns_basic {}} + +test basic-7.1 {TclRenameCommand, name of existing cmd can have namespace qualifiers} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename cmd ""} + namespace eval test_ns_basic { + proc p {} { + return "p in [namespace current]" + } + } + list [test_ns_basic::p] \ + [rename test_ns_basic::p test_ns_basic::q] \ + [test_ns_basic::q] +} {{p in ::test_ns_basic} {} {p in ::test_ns_basic}} +test basic-7.2 {TclRenameCommand, existing cmd must be found} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {rename test_ns_basic::p test_ns_basic::q} msg] $msg +} {1 {can't rename "test_ns_basic::p": command doesn't exist}} +test basic-7.3 {TclRenameCommand, delete cmd if new name is empty} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_basic { + proc p {} { + return "p in [namespace current]" + } + } + list [info commands test_ns_basic::*] \ + [rename test_ns_basic::p ""] \ + [info commands test_ns_basic::*] +} {::test_ns_basic::p {} {}} +test basic-7.4 {TclRenameCommand, bad new name} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_basic { + proc p {} { + return "p in [namespace current]" + } + } + rename test_ns_basic::p :::george::martha +} {} +test basic-7.5 {TclRenameCommand, new name must not already exist} { + namespace eval test_ns_basic { + proc q {} { + return 42 + } + } + list [catch {rename test_ns_basic::q :::george::martha} msg] $msg +} {1 {can't rename to ":::george::martha": command already exists}} +test basic-7.6 {TclRenameCommand, check for command shadowing by newly renamed cmd} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename p ""} + catch {rename q ""} + proc p {} { + return "p in [namespace current]" + } + proc q {} { + return "q in [namespace current]" + } + namespace eval test_ns_basic { + proc callP {} { + p + } + } + list [test_ns_basic::callP] \ + [rename q test_ns_basic::p] \ + [test_ns_basic::callP] +} {{p in ::} {} {q in ::test_ns_basic}} + +test basic-8.1 {Tcl_GetCommandInfo, names for commands created inside namespaces} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename p ""} + catch {rename q ""} + catch {unset x} + set x [namespace eval test_ns_basic::test_ns_basic2 { + # the following creates a cmd in the global namespace + testcmdtoken create p + }] + list [testcmdtoken name $x] \ + [rename ::p q] \ + [testcmdtoken name $x] +} {{p ::p} {} {q ::q}} +test basic-8.2 {Tcl_GetCommandInfo, names for commands created outside namespaces} { + catch {rename q ""} + set x [testcmdtoken create test_ns_basic::test_ns_basic2::p] + list [testcmdtoken name $x] \ + [rename test_ns_basic::test_ns_basic2::p q] \ + [testcmdtoken name $x] +} {{p ::test_ns_basic::test_ns_basic2::p} {} {q ::q}} + +test basic-9.1 {Tcl_GetCommandFullName} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_basic1 { + namespace export cmd* + proc cmd1 {} {} + proc cmd2 {} {} + } + namespace eval test_ns_basic2 { + namespace export * + namespace import ::test_ns_basic1::* + proc p {} {} + } + namespace eval test_ns_basic3 { + namespace import ::test_ns_basic2::* + proc q {} {} + list [namespace which -command foreach] \ + [namespace which -command q] \ + [namespace which -command p] \ + [namespace which -command cmd1] \ + [namespace which -command ::test_ns_basic2::cmd2] + } +} {::foreach ::test_ns_basic3::q ::test_ns_basic3::p ::test_ns_basic3::cmd1 ::test_ns_basic2::cmd2} + +test basic-10.1 {Tcl_DeleteCommandFromToken, invalidate all compiled code if cmd has compile proc} { + catch {interp delete test_interp} + catch {unset x} + interp create test_interp + interp eval test_interp { + proc useSet {} { + return [set a 123] + } + } + set x [interp eval test_interp {useSet}] + interp eval test_interp { + rename set "" + proc set {args} { + return "set called with $args" + } + } + list $x \ + [interp eval test_interp {useSet}] \ + [interp delete test_interp] +} {123 {set called with a 123} {}} +test basic-10.2 {Tcl_DeleteCommandFromToken, deleting commands changes command epoch} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename p ""} + proc p {} { + return "global p" + } + namespace eval test_ns_basic { + proc p {} { + return "namespace p" + } + proc callP {} { + p + } + } + list [test_ns_basic::callP] \ + [rename test_ns_basic::p ""] \ + [test_ns_basic::callP] +} {{namespace p} {} {global p}} +test basic-10.3 {Tcl_DeleteCommandFromToken, delete imported cmds that refer to a deleted cmd} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename p ""} + namespace eval test_ns_basic { + namespace export p + proc p {} {return 42} + } + namespace eval test_ns_basic2 { + namespace import ::test_ns_basic::* + proc callP {} { + p + } + } + list [test_ns_basic2::callP] \ + [info commands test_ns_basic2::*] \ + [rename test_ns_basic::p ""] \ + [catch {test_ns_basic2::callP} msg] $msg \ + [info commands test_ns_basic2::*] +} {42 {::test_ns_basic2::callP ::test_ns_basic2::p} {} 1 {invalid command name "p"} ::test_ns_basic2::callP} + +test basic-11.1 {TclObjInvoke, lookup of "unknown" command} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {interp delete test_interp} + interp create test_interp + interp eval test_interp { + proc unknown {args} { + return "global unknown" + } + namespace eval test_ns_basic { + proc unknown {args} { + return "namespace unknown" + } + } + } + list [interp alias test_interp newAlias test_interp doesntExist] \ + [catch {interp eval test_interp {newAlias}} msg] $msg \ + [interp delete test_interp] +} {newAlias 0 {global unknown} {}} + +test basic-12.1 {Tcl_CreateTrace, correct command and argc/argv arguments of trace proc} { + testcmdtrace tracetest {set stuff [info tclversion]} +} {{info tclversion} {info tclversion} {set stuff [info tclversion]} {set stuff 8.0}} +test basic-12.2 {Tcl_CreateTrace, correct command and argc/argv arguments of trace proc} { + testcmdtrace deletetest {set stuff [info tclversion]} +} 8.0 + +catch {eval namespace delete [namespace children :: test_ns_*]} +catch {namespace delete george} +catch {interp delete test_interp} +catch {rename p ""} +catch {rename q ""} +catch {rename cmd ""} +catch {rename value:at: ""} +catch {unset x} +set x 0 +unset x diff --git a/tests/binary.test b/tests/binary.test new file mode 100644 index 0000000..dcc5cf6 --- /dev/null +++ b/tests/binary.test @@ -0,0 +1,1443 @@ +# This file tests the tclBinary.c file and the "binary" Tcl command. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1997 by Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) binary.test 1.13 97/09/11 18:50:30 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test binary-1.1 {Tcl_BinaryObjCmd: bad args} { + list [catch {binary} msg] $msg +} {1 {wrong # args: should be "binary option ?arg arg ...?"}} +test binary-1.2 {Tcl_BinaryObjCmd: bad args} { + list [catch {binary foo} msg] $msg +} {1 {bad option "foo": must be format, or scan}} + +test binary-1.3 {Tcl_BinaryObjCmd: format error} { + list [catch {binary f} msg] $msg +} {1 {wrong # args: should be "binary format formatString ?arg arg ...?"}} +test binary-1.4 {Tcl_BinaryObjCmd: format} { + binary format "" +} {} + + + +test binary-2.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format a } msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-2.2 {Tcl_BinaryObjCmd: format} { + binary format a0 foo +} {} +test binary-2.3 {Tcl_BinaryObjCmd: format} { + binary format a f +} {f} +test binary-2.4 {Tcl_BinaryObjCmd: format} { + binary format a foo +} {f} +test binary-2.5 {Tcl_BinaryObjCmd: format} { + binary format a3 foo +} {foo} +test binary-2.6 {Tcl_BinaryObjCmd: format} { + binary format a5 foo +} foo\x00\x00 +test binary-2.7 {Tcl_BinaryObjCmd: format} { + binary format a*a3 foobarbaz blat +} foobarbazbla +test binary-2.8 {Tcl_BinaryObjCmd: format} { + binary format a*X3a2 foobar x +} foox\x00r + +test binary-3.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format A} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-3.2 {Tcl_BinaryObjCmd: format} { + binary format A0 f +} {} +test binary-3.3 {Tcl_BinaryObjCmd: format} { + binary format A f +} {f} +test binary-3.4 {Tcl_BinaryObjCmd: format} { + binary format A foo +} {f} +test binary-3.5 {Tcl_BinaryObjCmd: format} { + binary format A3 foo +} {foo} +test binary-3.6 {Tcl_BinaryObjCmd: format} { + binary format A5 foo +} {foo } +test binary-3.7 {Tcl_BinaryObjCmd: format} { + binary format A*A3 foobarbaz blat +} foobarbazbla +test binary-3.8 {Tcl_BinaryObjCmd: format} { + binary format A*X3A2 foobar x +} {foox r} + +test binary-4.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format B} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-4.2 {Tcl_BinaryObjCmd: format} { + binary format B0 1 +} {} +test binary-4.3 {Tcl_BinaryObjCmd: format} { + binary format B 1 +} \x80 +test binary-4.4 {Tcl_BinaryObjCmd: format} { + binary format B* 010011 +} \x4c +test binary-4.5 {Tcl_BinaryObjCmd: format} { + binary format B8 01001101 +} \x4d +test binary-4.6 {Tcl_BinaryObjCmd: format} { + binary format A2X2B9 oo 01001101 +} \x4d\x00 +test binary-4.7 {Tcl_BinaryObjCmd: format} { + binary format B9 010011011010 +} \x4d\x80 +test binary-4.8 {Tcl_BinaryObjCmd: format} { + binary format B2B3 10 010 +} \x80\x40 +test binary-4.9 {Tcl_BinaryObjCmd: format} { + list [catch {binary format B1B5 1 foo} msg] $msg +} {1 {expected binary string but got "foo" instead}} + +test binary-5.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format b} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-5.2 {Tcl_BinaryObjCmd: format} { + binary format b0 1 +} {} +test binary-5.3 {Tcl_BinaryObjCmd: format} { + binary format b 1 +} \x01 +test binary-5.4 {Tcl_BinaryObjCmd: format} { + binary format b* 010011 +} 2 +test binary-5.5 {Tcl_BinaryObjCmd: format} { + binary format b8 01001101 +} \xb2 +test binary-5.6 {Tcl_BinaryObjCmd: format} { + binary format A2X2b9 oo 01001101 +} \xb2\x00 +test binary-5.7 {Tcl_BinaryObjCmd: format} { + binary format b9 010011011010 +} \xb2\x01 +test binary-5.8 {Tcl_BinaryObjCmd: format} { + binary format b17 1 +} \x01\00\00 +test binary-5.9 {Tcl_BinaryObjCmd: format} { + binary format b2b3 10 010 +} \x01\x02 +test binary-5.10 {Tcl_BinaryObjCmd: format} { + list [catch {binary format b1b5 1 foo} msg] $msg +} {1 {expected binary string but got "foo" instead}} + +test binary-6.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format h} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-6.2 {Tcl_BinaryObjCmd: format} { + binary format h0 1 +} {} +test binary-6.3 {Tcl_BinaryObjCmd: format} { + binary format h 1 +} \x01 +test binary-6.4 {Tcl_BinaryObjCmd: format} { + binary format h c +} \x0c +test binary-6.5 {Tcl_BinaryObjCmd: format} { + binary format h* baadf00d +} \xab\xda\x0f\xd0 +test binary-6.6 {Tcl_BinaryObjCmd: format} { + binary format h4 c410 +} \x4c\x01 +test binary-6.7 {Tcl_BinaryObjCmd: format} { + binary format h6 c4102 +} \x4c\x01\x02 +test binary-6.8 {Tcl_BinaryObjCmd: format} { + binary format h5 c41020304 +} \x4c\x01\x02 +test binary-6.9 {Tcl_BinaryObjCmd: format} { + binary format a3X3h5 foo 2 +} \x02\x00\x00 +test binary-6.10 {Tcl_BinaryObjCmd: format} { + binary format h2h3 23 456 +} \x32\x54\x06 +test binary-6.11 {Tcl_BinaryObjCmd: format} { + list [catch {binary format h2 foo} msg] $msg +} {1 {expected hexadecimal string but got "foo" instead}} + +test binary-7.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format H} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-7.2 {Tcl_BinaryObjCmd: format} { + binary format H0 1 +} {} +test binary-7.3 {Tcl_BinaryObjCmd: format} { + binary format H 1 +} \x10 +test binary-7.4 {Tcl_BinaryObjCmd: format} { + binary format H c +} \xc0 +test binary-7.5 {Tcl_BinaryObjCmd: format} { + binary format H* baadf00d +} \xba\xad\xf0\x0d +test binary-7.6 {Tcl_BinaryObjCmd: format} { + binary format H4 c410 +} \xc4\x10 +test binary-7.7 {Tcl_BinaryObjCmd: format} { + binary format H6 c4102 +} \xc4\x10\x20 +test binary-7.8 {Tcl_BinaryObjCmd: format} { + binary format H5 c41023304 +} \xc4\x10\x20 +test binary-7.9 {Tcl_BinaryObjCmd: format} { + binary format a3X3H5 foo 2 +} \x20\x00\x00 +test binary-7.10 {Tcl_BinaryObjCmd: format} { + binary format H2H3 23 456 +} \x23\x45\x60 +test binary-7.11 {Tcl_BinaryObjCmd: format} { + list [catch {binary format H2 foo} msg] $msg +} {1 {expected hexadecimal string but got "foo" instead}} + +test binary-8.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format c} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-8.2 {Tcl_BinaryObjCmd: format} { + list [catch {binary format c blat} msg] $msg +} {1 {expected integer but got "blat"}} +test binary-8.3 {Tcl_BinaryObjCmd: format} { + binary format c0 0x50 +} {} +test binary-8.4 {Tcl_BinaryObjCmd: format} { + binary format c 0x50 +} P +test binary-8.5 {Tcl_BinaryObjCmd: format} { + binary format c 0x5052 +} R +test binary-8.6 {Tcl_BinaryObjCmd: format} { + binary format c2 {0x50 0x52} +} PR +test binary-8.7 {Tcl_BinaryObjCmd: format} { + binary format c2 {0x50 0x52 0x53} +} PR +test binary-8.8 {Tcl_BinaryObjCmd: format} { + binary format c* {0x50 0x52} +} PR +test binary-8.9 {Tcl_BinaryObjCmd: format} { + list [catch {binary format c2 {0x50}} msg] $msg +} {1 {number of elements in list does not match count}} +test binary-8.10 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + list [catch {binary format c $a} msg] $msg +} [list 1 "expected integer but got \"0x50 0x51\""] +test binary-8.11 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + binary format c1 $a +} P + +test binary-9.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format s} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-9.2 {Tcl_BinaryObjCmd: format} { + list [catch {binary format s blat} msg] $msg +} {1 {expected integer but got "blat"}} +test binary-9.3 {Tcl_BinaryObjCmd: format} { + binary format s0 0x50 +} {} +test binary-9.4 {Tcl_BinaryObjCmd: format} { + binary format s 0x50 +} P\x00 +test binary-9.5 {Tcl_BinaryObjCmd: format} { + binary format s 0x5052 +} RP +test binary-9.6 {Tcl_BinaryObjCmd: format} { + binary format s 0x505251 0x53 +} QR +test binary-9.7 {Tcl_BinaryObjCmd: format} { + binary format s2 {0x50 0x52} +} P\x00R\x00 +test binary-9.8 {Tcl_BinaryObjCmd: format} { + binary format s* {0x5051 0x52} +} QPR\x00 +test binary-9.9 {Tcl_BinaryObjCmd: format} { + binary format s2 {0x50 0x52 0x53} 0x54 +} P\x00R\x00 +test binary-9.10 {Tcl_BinaryObjCmd: format} { + list [catch {binary format s2 {0x50}} msg] $msg +} {1 {number of elements in list does not match count}} +test binary-9.11 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + list [catch {binary format s $a} msg] $msg +} [list 1 "expected integer but got \"0x50 0x51\""] +test binary-9.12 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + binary format s1 $a +} P\x00 + +test binary-10.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format S} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-10.2 {Tcl_BinaryObjCmd: format} { + list [catch {binary format S blat} msg] $msg +} {1 {expected integer but got "blat"}} +test binary-10.3 {Tcl_BinaryObjCmd: format} { + binary format S0 0x50 +} {} +test binary-10.4 {Tcl_BinaryObjCmd: format} { + binary format S 0x50 +} \x00P +test binary-10.5 {Tcl_BinaryObjCmd: format} { + binary format S 0x5052 +} PR +test binary-10.6 {Tcl_BinaryObjCmd: format} { + binary format S 0x505251 0x53 +} RQ +test binary-10.7 {Tcl_BinaryObjCmd: format} { + binary format S2 {0x50 0x52} +} \x00P\x00R +test binary-10.8 {Tcl_BinaryObjCmd: format} { + binary format S* {0x5051 0x52} +} PQ\x00R +test binary-10.9 {Tcl_BinaryObjCmd: format} { + binary format S2 {0x50 0x52 0x53} 0x54 +} \x00P\x00R +test binary-10.10 {Tcl_BinaryObjCmd: format} { + list [catch {binary format S2 {0x50}} msg] $msg +} {1 {number of elements in list does not match count}} +test binary-10.11 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + list [catch {binary format S $a} msg] $msg +} [list 1 "expected integer but got \"0x50 0x51\""] +test binary-10.12 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + binary format S1 $a +} \x00P + +test binary-11.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format i} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-11.2 {Tcl_BinaryObjCmd: format} { + list [catch {binary format i blat} msg] $msg +} {1 {expected integer but got "blat"}} +test binary-11.3 {Tcl_BinaryObjCmd: format} { + binary format i0 0x50 +} {} +test binary-11.4 {Tcl_BinaryObjCmd: format} { + binary format i 0x50 +} P\x00\x00\x00 +test binary-11.5 {Tcl_BinaryObjCmd: format} { + binary format i 0x5052 +} RP\x00\x00 +test binary-11.6 {Tcl_BinaryObjCmd: format} { + binary format i 0x505251 0x53 +} QRP\x00 +test binary-11.7 {Tcl_BinaryObjCmd: format} { + binary format i1 {0x505251 0x53} +} QRP\x00 +test binary-11.8 {Tcl_BinaryObjCmd: format} { + binary format i 0x53525150 +} PQRS +test binary-11.9 {Tcl_BinaryObjCmd: format} { + binary format i2 {0x50 0x52} +} P\x00\x00\x00R\x00\x00\x00 +test binary-11.10 {Tcl_BinaryObjCmd: format} { + binary format i* {0x50515253 0x52} +} SRQPR\x00\x00\x00 +test binary-11.11 {Tcl_BinaryObjCmd: format} { + list [catch {binary format i2 {0x50}} msg] $msg +} {1 {number of elements in list does not match count}} +test binary-11.12 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + list [catch {binary format i $a} msg] $msg +} [list 1 "expected integer but got \"0x50 0x51\""] +test binary-11.13 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + binary format i1 $a +} P\x00\x00\x00 + +test binary-12.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format I} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-12.2 {Tcl_BinaryObjCmd: format} { + list [catch {binary format I blat} msg] $msg +} {1 {expected integer but got "blat"}} +test binary-12.3 {Tcl_BinaryObjCmd: format} { + binary format I0 0x50 +} {} +test binary-12.4 {Tcl_BinaryObjCmd: format} { + binary format I 0x50 +} \x00\x00\x00P +test binary-12.5 {Tcl_BinaryObjCmd: format} { + binary format I 0x5052 +} \x00\x00PR +test binary-12.6 {Tcl_BinaryObjCmd: format} { + binary format I 0x505251 0x53 +} \x00PRQ +test binary-12.7 {Tcl_BinaryObjCmd: format} { + binary format I1 {0x505251 0x53} +} \x00PRQ +test binary-12.8 {Tcl_BinaryObjCmd: format} { + binary format I 0x53525150 +} SRQP +test binary-12.9 {Tcl_BinaryObjCmd: format} { + binary format I2 {0x50 0x52} +} \x00\x00\x00P\x00\x00\x00R +test binary-12.10 {Tcl_BinaryObjCmd: format} { + binary format I* {0x50515253 0x52} +} PQRS\x00\x00\x00R +test binary-12.11 {Tcl_BinaryObjCmd: format} { + list [catch {binary format i2 {0x50}} msg] $msg +} {1 {number of elements in list does not match count}} +test binary-12.12 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + list [catch {binary format I $a} msg] $msg +} [list 1 "expected integer but got \"0x50 0x51\""] +test binary-12.13 {Tcl_BinaryObjCmd: format} { + set a {0x50 0x51} + binary format I1 $a +} \x00\x00\x00P + +test binary-13.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format f} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-13.2 {Tcl_BinaryObjCmd: format} { + list [catch {binary format f blat} msg] $msg +} {1 {expected floating-point number but got "blat"}} +test binary-13.3 {Tcl_BinaryObjCmd: format} { + binary format f0 1.6 +} {} +test binary-13.4 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + binary format f 1.6 +} \x3f\xcc\xcc\xcd +test binary-13.5 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + binary format f 1.6 +} \xcd\xcc\xcc\x3f +test binary-13.6 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + binary format f* {1.6 3.4} +} \x3f\xcc\xcc\xcd\x40\x59\x99\x9a +test binary-13.7 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + binary format f* {1.6 3.4} +} \xcd\xcc\xcc\x3f\x9a\x99\x59\x40 +test binary-13.8 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + binary format f2 {1.6 3.4} +} \x3f\xcc\xcc\xcd\x40\x59\x99\x9a +test binary-13.9 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + binary format f2 {1.6 3.4} +} \xcd\xcc\xcc\x3f\x9a\x99\x59\x40 +test binary-13.10 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + binary format f2 {1.6 3.4 5.6} +} \x3f\xcc\xcc\xcd\x40\x59\x99\x9a +test binary-13.11 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + binary format f2 {1.6 3.4 5.6} +} \xcd\xcc\xcc\x3f\x9a\x99\x59\x40 +test binary-13.12 {Tcl_BinaryObjCmd: float overflow} {nonPortable macOrUnix} { + binary format f -3.402825e+38 +} \xff\x7f\xff\xff +test binary-13.13 {Tcl_BinaryObjCmd: float overflow} {nonPortable pcOnly} { + binary format f -3.402825e+38 +} \xff\xff\x7f\xff +test binary-13.14 {Tcl_BinaryObjCmd: float underflow} {nonPortable macOrUnix} { + binary format f -3.402825e-100 +} \x80\x00\x00\x00 +test binary-13.15 {Tcl_BinaryObjCmd: float underflow} {nonPortable pcOnly} { + binary format f -3.402825e-100 +} \x00\x00\x00\x80 +test binary-13.16 {Tcl_BinaryObjCmd: format} { + list [catch {binary format f2 {1.6}} msg] $msg +} {1 {number of elements in list does not match count}} +test binary-13.17 {Tcl_BinaryObjCmd: format} { + set a {1.6 3.4} + list [catch {binary format f $a} msg] $msg +} [list 1 "expected floating-point number but got \"1.6 3.4\""] +test binary-13.18 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + set a {1.6 3.4} + binary format f1 $a +} \x3f\xcc\xcc\xcd +test binary-13.19 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + set a {1.6 3.4} + binary format f1 $a +} \xcd\xcc\xcc\x3f + +test binary-14.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format d} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-14.2 {Tcl_BinaryObjCmd: format} { + list [catch {binary format d blat} msg] $msg +} {1 {expected floating-point number but got "blat"}} +test binary-14.3 {Tcl_BinaryObjCmd: format} { + binary format d0 1.6 +} {} +test binary-14.4 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + binary format d 1.6 +} \x3f\xf9\x99\x99\x99\x99\x99\x9a +test binary-14.5 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + binary format d 1.6 +} \x9a\x99\x99\x99\x99\x99\xf9\x3f +test binary-14.6 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + binary format d* {1.6 3.4} +} \x3f\xf9\x99\x99\x99\x99\x99\x9a\x40\x0b\x33\x33\x33\x33\x33\x33 +test binary-14.7 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + binary format d* {1.6 3.4} +} \x9a\x99\x99\x99\x99\x99\xf9\x3f\x33\x33\x33\x33\x33\x33\x0b\x40 +test binary-14.8 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + binary format d2 {1.6 3.4} +} \x3f\xf9\x99\x99\x99\x99\x99\x9a\x40\x0b\x33\x33\x33\x33\x33\x33 +test binary-14.9 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + binary format d2 {1.6 3.4} +} \x9a\x99\x99\x99\x99\x99\xf9\x3f\x33\x33\x33\x33\x33\x33\x0b\x40 +test binary-14.10 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + binary format d2 {1.6 3.4 5.6} +} \x3f\xf9\x99\x99\x99\x99\x99\x9a\x40\x0b\x33\x33\x33\x33\x33\x33 +test binary-14.11 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + binary format d2 {1.6 3.4 5.6} +} \x9a\x99\x99\x99\x99\x99\xf9\x3f\x33\x33\x33\x33\x33\x33\x0b\x40 +test binary-14.12 {Tcl_BinaryObjCmd: float overflow} {nonPortable unixOnly} { + binary format d NaN +} \x7f\xff\xff\xff\xff\xff\xff\xff +test binary-14.13 {Tcl_BinaryObjCmd: float overflow} {nonPortable macOnly} { + binary format d NaN +} \x7f\xf8\x02\xa0\x00\x00\x00\x00 +test binary-14.14 {Tcl_BinaryObjCmd: format} { + list [catch {binary format d2 {1.6}} msg] $msg +} {1 {number of elements in list does not match count}} +test binary-14.15 {Tcl_BinaryObjCmd: format} { + set a {1.6 3.4} + list [catch {binary format d $a} msg] $msg +} [list 1 "expected floating-point number but got \"1.6 3.4\""] +test binary-14.16 {Tcl_BinaryObjCmd: format} {nonPortable macOrUnix} { + set a {1.6 3.4} + binary format d1 $a +} \x3f\xf9\x99\x99\x99\x99\x99\x9a +test binary-14.17 {Tcl_BinaryObjCmd: format} {nonPortable pcOnly} { + set a {1.6 3.4} + binary format d1 $a +} \x9a\x99\x99\x99\x99\x99\xf9\x3f + +test binary-15.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format ax*a "y" "z"} msg] $msg +} {1 {cannot use "*" in format string with "x"}} +test binary-15.2 {Tcl_BinaryObjCmd: format} { + binary format axa "y" "z" +} y\x00z +test binary-15.3 {Tcl_BinaryObjCmd: format} { + binary format ax3a "y" "z" +} y\x00\x00\x00z +test binary-15.4 {Tcl_BinaryObjCmd: format} { + binary format a*X3x3a* "foo" "z" +} \x00\x00\x00z + +test binary-16.1 {Tcl_BinaryObjCmd: format} { + binary format a*X*a "foo" "z" +} zoo +test binary-16.2 {Tcl_BinaryObjCmd: format} { + binary format aX3a "y" "z" +} z +test binary-16.3 {Tcl_BinaryObjCmd: format} { + binary format a*Xa* "foo" "zy" +} fozy +test binary-16.4 {Tcl_BinaryObjCmd: format} { + binary format a*X3a "foobar" "z" +} foozar +test binary-16.5 {Tcl_BinaryObjCmd: format} { + binary format a*X3aX2a "foobar" "z" "b" +} fobzar + +test binary-17.1 {Tcl_BinaryObjCmd: format} { + binary format @1 +} \x00 +test binary-17.2 {Tcl_BinaryObjCmd: format} { + binary format @5a2 "ab" +} \x00\x00\x00\x00\x00\x61\x62 +test binary-17.3 {Tcl_BinaryObjCmd: format} { + binary format {a* @0 a2 @* a*} "foobar" "ab" "blat" +} abobarblat + +test binary-18.1 {Tcl_BinaryObjCmd: format} { + list [catch {binary format u0a3 abc abd} msg] $msg +} {1 {bad field specifier "u"}} + + +test binary-19.1 {Tcl_BinaryObjCmd: errors} { + list [catch {binary s} msg] $msg +} {1 {wrong # args: should be "binary scan value formatString ?varName varName ...?"}} +test binary-19.2 {Tcl_BinaryObjCmd: errors} { + list [catch {binary scan foo} msg] $msg +} {1 {wrong # args: should be "binary scan value formatString ?varName varName ...?"}} +test binary-19.3 {Tcl_BinaryObjCmd: scan} { + binary scan {} {} +} 0 + +test binary-20.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc a} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-20.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan abc a arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-20.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 abc + list [binary scan abc a0 arg1] $arg1 +} {1 {}} +test binary-20.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc a* arg1] $arg1 +} {1 abc} +test binary-20.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc a5 arg1] [info exist arg1] +} {0 0} +test binary-20.6 {Tcl_BinaryObjCmd: scan} { + set arg1 foo + list [binary scan abc a2 arg1] $arg1 +} {1 ab} +test binary-20.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + list [binary scan abcdef a2a2 arg1 arg2] $arg1 $arg2 +} {2 ab cd} +test binary-20.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc a2 arg1(a)] $arg1(a) +} {1 ab} +test binary-20.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc a arg1(a)] $arg1(a) +} {1 a} + +test binary-21.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc A} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-21.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan abc A arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-21.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 abc + list [binary scan abc A0 arg1] $arg1 +} {1 {}} +test binary-21.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc A* arg1] $arg1 +} {1 abc} +test binary-21.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc A5 arg1] [info exist arg1] +} {0 0} +test binary-21.6 {Tcl_BinaryObjCmd: scan} { + set arg1 foo + list [binary scan abc A2 arg1] $arg1 +} {1 ab} +test binary-21.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + list [binary scan abcdef A2A2 arg1 arg2] $arg1 $arg2 +} {2 ab cd} +test binary-21.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc A2 arg1(a)] $arg1(a) +} {1 ab} +test binary-21.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc A2 arg1(a)] $arg1(a) +} {1 ab} +test binary-21.10 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc A arg1(a)] $arg1(a) +} {1 a} +test binary-21.11 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan "abc def \x00 " A* arg1] $arg1 +} {1 {abc def}} +test binary-21.12 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan "abc def \x00ghi " A* arg1] $arg1 +} [list 1 "abc def \x00ghi"] + +test binary-22.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc b} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-22.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 b* arg1] $arg1 +} {1 0100101011001010} +test binary-22.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x82\x53 b arg1] $arg1 +} {1 0} +test binary-22.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x82\x53 b1 arg1] $arg1 +} {1 0} +test binary-22.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x82\x53 b0 arg1] $arg1 +} {1 {}} +test binary-22.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 b5 arg1] $arg1 +} {1 01001} +test binary-22.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 b8 arg1] $arg1 +} {1 01001010} +test binary-22.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 b14 arg1] $arg1 +} {1 01001010110010} +test binary-22.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 b14 arg1] $arg1 +} {0 foo} +test binary-22.10 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53 b1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-22.11 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x07\x87\x05 b5b* arg1 arg2] $arg1 $arg2 +} {2 11100 1110000110100000} + + +test binary-23.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc B} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-23.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 B* arg1] $arg1 +} {1 0101001001010011} +test binary-23.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x82\x53 B arg1] $arg1 +} {1 1} +test binary-23.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x82\x53 B1 arg1] $arg1 +} {1 1} +test binary-23.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 B0 arg1] $arg1 +} {1 {}} +test binary-23.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 B5 arg1] $arg1 +} {1 01010} +test binary-23.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 B8 arg1] $arg1 +} {1 01010010} +test binary-23.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 B14 arg1] $arg1 +} {1 01010010010100} +test binary-23.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 B14 arg1] $arg1 +} {0 foo} +test binary-23.10 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53 B1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-23.11 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x70\x87\x05 B5B* arg1 arg2] $arg1 $arg2 +} {2 01110 1000011100000101} + +test binary-24.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc h} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-24.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 h* arg1] $arg1 +} {1 253a} +test binary-24.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \xc2\xa3 h arg1] $arg1 +} {1 2} +test binary-24.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x82\x53 h1 arg1] $arg1 +} {1 2} +test binary-24.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 h0 arg1] $arg1 +} {1 {}} +test binary-24.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \xf2\x53 h2 arg1] $arg1 +} {1 2f} +test binary-24.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 h3 arg1] $arg1 +} {1 253} +test binary-24.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 h3 arg1] $arg1 +} {0 foo} +test binary-24.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53 h1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-24.10 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x70\x87\x05 h2h* arg1 arg2] $arg1 $arg2 +} {2 07 7850} + +test binary-25.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc H} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-25.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 H* arg1] $arg1 +} {1 52a3} +test binary-25.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \xc2\xa3 H arg1] $arg1 +} {1 c} +test binary-25.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x82\x53 H1 arg1] $arg1 +} {1 8} +test binary-25.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 H0 arg1] $arg1 +} {1 {}} +test binary-25.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \xf2\x53 H2 arg1] $arg1 +} {1 f2} +test binary-25.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\x53 H3 arg1] $arg1 +} {1 525} +test binary-25.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 H3 arg1] $arg1 +} {0 foo} +test binary-25.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53 H1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-25.10 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x70\x87\x05 H2H* arg1 arg2] $arg1 $arg2 +} {2 70 8705} + +test binary-26.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc c} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-26.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 c* arg1] $arg1 +} {1 {82 -93}} +test binary-26.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 c arg1] $arg1 +} {1 82} +test binary-26.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 c1 arg1] $arg1 +} {1 82} +test binary-26.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 c0 arg1] $arg1 +} {1 {}} +test binary-26.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 c2 arg1] $arg1 +} {1 {82 -93}} +test binary-26.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \xff c arg1] $arg1 +} {1 -1} +test binary-26.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 c3 arg1] $arg1 +} {0 foo} +test binary-26.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53 c1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-26.10 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x70\x87\x05 c2c* arg1 arg2] $arg1 $arg2 +} {2 {112 -121} 5} + +test binary-27.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc s} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-27.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54 s* arg1] $arg1 +} {1 {-23726 21587}} +test binary-27.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54 s arg1] $arg1 +} {1 -23726} +test binary-27.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 s1 arg1] $arg1 +} {1 -23726} +test binary-27.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 s0 arg1] $arg1 +} {1 {}} +test binary-27.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54 s2 arg1] $arg1 +} {1 {-23726 21587}} +test binary-27.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 s1 arg1] $arg1 +} {0 foo} +test binary-27.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53 s1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-27.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x52\xa3\x53\x54\x05 s2c* arg1 arg2] $arg1 $arg2 +} {2 {-23726 21587} 5} + +test binary-28.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc S} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-28.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54 S* arg1] $arg1 +} {1 {21155 21332}} +test binary-28.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54 S arg1] $arg1 +} {1 21155} +test binary-28.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 S1 arg1] $arg1 +} {1 21155} +test binary-28.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3 S0 arg1] $arg1 +} {1 {}} +test binary-28.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54 S2 arg1] $arg1 +} {1 {21155 21332}} +test binary-28.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 S1 arg1] $arg1 +} {0 foo} +test binary-28.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53 S1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-28.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x52\xa3\x53\x54\x05 S2c* arg1 arg2] $arg1 $arg2 +} {2 {21155 21332} 5} + +test binary-29.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc i} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-29.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54\x01\x02\x03\x04 i* arg1] $arg1 +} {1 {1414767442 67305985}} +test binary-29.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54\x01\x02\x03\x04 i arg1] $arg1 +} {1 1414767442} +test binary-29.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54 i1 arg1] $arg1 +} {1 1414767442} +test binary-29.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53 i0 arg1] $arg1 +} {1 {}} +test binary-29.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54\x01\x02\x03\x04 i2 arg1] $arg1 +} {1 {1414767442 67305985}} +test binary-29.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 i1 arg1] $arg1 +} {0 foo} +test binary-29.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53\x53\x54 i1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-29.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x52\xa3\x53\x54\x01\x02\x03\x04\x05 i2c* arg1 arg2] $arg1 $arg2 +} {2 {1414767442 67305985} 5} + +test binary-30.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc I} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-30.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54\x01\x02\x03\x04 I* arg1] $arg1 +} {1 {1386435412 16909060}} +test binary-30.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54\x01\x02\x03\x04 I arg1] $arg1 +} {1 1386435412} +test binary-30.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54 I1 arg1] $arg1 +} {1 1386435412} +test binary-30.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53 I0 arg1] $arg1 +} {1 {}} +test binary-30.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan \x52\xa3\x53\x54\x01\x02\x03\x04 I2 arg1] $arg1 +} {1 {1386435412 16909060}} +test binary-30.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 I1 arg1] $arg1 +} {0 foo} +test binary-30.8 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x52\x53\x53\x54 I1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-30.9 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x52\xa3\x53\x54\x01\x02\x03\x04\x05 I2c* arg1 arg2] $arg1 $arg2 +} {2 {1386435412 16909060} 5} + +test binary-31.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc f} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-31.2 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xcc\xcc\xcd\x40\x59\x99\x9a f* arg1] $arg1 +} {1 {1.60000002384 3.40000009537}} +test binary-31.3 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \xcd\xcc\xcc\x3f\x9a\x99\x59\x40 f* arg1] $arg1 +} {1 {1.60000002384 3.40000009537}} +test binary-31.4 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xcc\xcc\xcd\x40\x59\x99\x9a f arg1] $arg1 +} {1 1.60000002384} +test binary-31.5 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \xcd\xcc\xcc\x3f\x9a\x99\x59\x40 f arg1] $arg1 +} {1 1.60000002384} +test binary-31.6 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xcc\xcc\xcd f1 arg1] $arg1 +} {1 1.60000002384} +test binary-31.7 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \xcd\xcc\xcc\x3f f1 arg1] $arg1 +} {1 1.60000002384} +test binary-31.8 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xcc\xcc\xcd f0 arg1] $arg1 +} {1 {}} +test binary-31.9 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \xcd\xcc\xcc\x3f f0 arg1] $arg1 +} {1 {}} +test binary-31.10 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xcc\xcc\xcd\x40\x59\x99\x9a f2 arg1] $arg1 +} {1 {1.60000002384 3.40000009537}} +test binary-31.11 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \xcd\xcc\xcc\x3f\x9a\x99\x59\x40 f2 arg1] $arg1 +} {1 {1.60000002384 3.40000009537}} +test binary-31.12 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 f1 arg1] $arg1 +} {0 foo} +test binary-31.13 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x3f\xcc\xcc\xcd f1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-31.14 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x3f\xcc\xcc\xcd\x40\x59\x99\x9a\x05 f2c* arg1 arg2] $arg1 $arg2 +} {2 {1.60000002384 3.40000009537} 5} +test binary-31.15 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \xcd\xcc\xcc\x3f\x9a\x99\x59\x40\x05 f2c* arg1 arg2] $arg1 $arg2 +} {2 {1.60000002384 3.40000009537} 5} + +test binary-32.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abc d} msg] $msg +} {1 {not enough arguments for all format specifiers}} +test binary-32.2 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xf9\x99\x99\x99\x99\x99\x9a\x40\x0b\x33\x33\x33\x33\x33\x33 d* arg1] $arg1 +} {1 {1.6 3.4}} +test binary-32.3 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \x9a\x99\x99\x99\x99\x99\xf9\x3f\x33\x33\x33\x33\x33\x33\x0b\x40 d* arg1] $arg1 +} {1 {1.6 3.4}} +test binary-32.4 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xf9\x99\x99\x99\x99\x99\x9a\x40\x0b\x33\x33\x33\x33\x33\x33 d arg1] $arg1 +} {1 1.6} +test binary-32.5 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \x9a\x99\x99\x99\x99\x99\xf9\x3f\x33\x33\x33\x33\x33\x33\x0b\x40 d arg1] $arg1 +} {1 1.6} +test binary-32.6 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xf9\x99\x99\x99\x99\x99\x9a d1 arg1] $arg1 +} {1 1.6} +test binary-32.7 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \x9a\x99\x99\x99\x99\x99\xf9\x3f d1 arg1] $arg1 +} {1 1.6} +test binary-32.8 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xf9\x99\x99\x99\x99\x99\x9a d0 arg1] $arg1 +} {1 {}} +test binary-32.9 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \x9a\x99\x99\x99\x99\x99\xf9\x3f d0 arg1] $arg1 +} {1 {}} +test binary-32.10 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1} + list [binary scan \x3f\xf9\x99\x99\x99\x99\x99\x9a\x40\x0b\x33\x33\x33\x33\x33\x33 d2 arg1] $arg1 +} {1 {1.6 3.4}} +test binary-32.11 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1} + list [binary scan \x9a\x99\x99\x99\x99\x99\xf9\x3f\x33\x33\x33\x33\x33\x33\x0b\x40 d2 arg1] $arg1 +} {1 {1.6 3.4}} +test binary-32.12 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 foo + list [binary scan \x52 d1 arg1] $arg1 +} {0 foo} +test binary-32.13 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + set arg1 1 + list [catch {binary scan \x3f\xf9\x99\x99\x99\x99\x99\x9a d1 arg1(a)} msg] $msg +} {1 {can't set "arg1(a)": variable isn't array}} +test binary-32.14 {Tcl_BinaryObjCmd: scan} {nonPortable macOrUnix} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x3f\xf9\x99\x99\x99\x99\x99\x9a\x40\x0b\x33\x33\x33\x33\x33\x33\x05 d2c* arg1 arg2] $arg1 $arg2 +} {2 {1.6 3.4} 5} +test binary-32.15 {Tcl_BinaryObjCmd: scan} {nonPortable pcOnly} { + catch {unset arg1 arg2} + set arg1 foo + set arg2 bar + list [binary scan \x9a\x99\x99\x99\x99\x99\xf9\x3f\x33\x33\x33\x33\x33\x33\x0b\x40\x05 d2c* arg1 arg2] $arg1 $arg2 +} {2 {1.6 3.4} 5} + +test binary-33.1 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + list [binary scan abcdefg a2xa3 arg1 arg2] $arg1 $arg2 +} {2 ab def} +test binary-33.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + set arg2 foo + list [binary scan abcdefg a3x*a3 arg1 arg2] $arg1 $arg2 +} {1 abc foo} +test binary-33.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + set arg2 foo + list [binary scan abcdefg a3x20a3 arg1 arg2] $arg1 $arg2 +} {1 abc foo} +test binary-33.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + set arg2 foo + list [binary scan abc a3x20a3 arg1 arg2] $arg1 $arg2 +} {1 abc foo} +test binary-33.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef x1a1 arg1] $arg1 +} {1 b} +test binary-33.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef x5a1 arg1] $arg1 +} {1 f} +test binary-33.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef x0a1 arg1] $arg1 +} {1 a} + +test binary-34.1 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + list [binary scan abcdefg a2Xa3 arg1 arg2] $arg1 $arg2 +} {2 ab bcd} +test binary-34.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + set arg2 foo + list [binary scan abcdefg a3X*a3 arg1 arg2] $arg1 $arg2 +} {2 abc abc} +test binary-34.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + set arg2 foo + list [binary scan abcdefg a3X20a3 arg1 arg2] $arg1 $arg2 +} {2 abc abc} +test binary-34.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abc X20a3 arg1] $arg1 +} {1 abc} +test binary-34.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef x*X1a1 arg1] $arg1 +} {1 f} +test binary-34.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef x*X5a1 arg1] $arg1 +} {1 b} +test binary-34.7 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef x3X0a1 arg1] $arg1 +} {1 d} + +test binary-35.1 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + list [catch {binary scan abcdefg a2@a3 arg1 arg2} msg] $msg +} {1 {missing count for "@" field specifier}} +test binary-35.2 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + set arg2 foo + list [binary scan abcdefg a3@*a3 arg1 arg2] $arg1 $arg2 +} {1 abc foo} +test binary-35.3 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + catch {unset arg2} + set arg2 foo + list [binary scan abcdefg a3@20a3 arg1 arg2] $arg1 $arg2 +} {1 abc foo} +test binary-35.4 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef @2a3 arg1] $arg1 +} {1 cde} +test binary-35.5 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef x*@1a1 arg1] $arg1 +} {1 b} +test binary-35.6 {Tcl_BinaryObjCmd: scan} { + catch {unset arg1} + list [binary scan abcdef x*@0a1 arg1] $arg1 +} {1 a} + +test binary-36.1 {Tcl_BinaryObjCmd: scan} { + list [catch {binary scan abcdef u0a3} msg] $msg +} {1 {bad field specifier "u"}} + +# GetFormatSpec is pretty thoroughly tested above, but there are a few +# cases we should text explicitly + +test binary-37.1 {GetFormatSpec: whitespace} { + binary format "a3 a5 a3" foo barblat baz +} foobarblbaz +test binary-37.2 {GetFormatSpec: whitespace} { + binary format " " foo +} {} +test binary-37.3 {GetFormatSpec: whitespace} { + binary format " a3" foo +} foo +test binary-37.4 {GetFormatSpec: whitespace} { + binary format "" foo +} {} +test binary-37.5 {GetFormatSpec: whitespace} { + binary format "" foo +} {} +test binary-37.6 {GetFormatSpec: whitespace} { + binary format " a3 " foo +} foo +test binary-37.7 {GetFormatSpec: numbers} { + list [catch {binary scan abcdef "x-1" foo} msg] $msg +} {1 {bad field specifier "-"}} +test binary-37.8 {GetFormatSpec: numbers} { + catch {unset arg1} + set arg1 foo + list [binary scan abcdef "a0x3" arg1] $arg1 +} {1 {}} +test binary-37.9 {GetFormatSpec: numbers} { + # test format of neg numbers + # bug report/fix provided by Harald Kirsch + set x [binary format f* {1 -1 2 -2 0}] + binary scan $x f* bla + set bla +} {1.0 -1.0 2.0 -2.0 0.0} + +test binary-38.1 {FormatNumber: word alignment} { + set x [binary format c1s1 1 1] +} \x01\x01\x00 +test binary-38.2 {FormatNumber: word alignment} { + set x [binary format c1S1 1 1] +} \x01\x00\x01 +test binary-38.3 {FormatNumber: word alignment} { + set x [binary format c1i1 1 1] +} \x01\x01\x00\x00\x00 +test binary-38.4 {FormatNumber: word alignment} { + set x [binary format c1I1 1 1] +} \x01\x00\x00\x00\x01 +test binary-38.5 {FormatNumber: word alignment} {nonPortable macOrUnix} { + set x [binary format c1d1 1 1.6] +} \x01\x3f\xf9\x99\x99\x99\x99\x99\x9a +test binary-38.6 {FormatNumber: word alignment} {nonPortable pcOnly} { + set x [binary format c1d1 1 1.6] +} \x01\x9a\x99\x99\x99\x99\x99\xf9\x3f +test binary-38.7 {FormatNumber: word alignment} {nonPortable macOrUnix} { + set x [binary format c1f1 1 1.6] +} \x01\x3f\xcc\xcc\xcd +test binary-38.8 {FormatNumber: word alignment} {nonPortable pcOnly} { + set x [binary format c1f1 1 1.6] +} \x01\xcd\xcc\xcc\x3f + +test binary-39.1 {ScanNumber: sign extension} { + catch {unset arg1} + list [binary scan \x52\xa3 c2 arg1] $arg1 +} {1 {82 -93}} +test binary-39.2 {ScanNumber: sign extension} { + catch {unset arg1} + list [binary scan \x01\x02\x01\x81\x82\x01\x81\x82 s4 arg1] $arg1 +} {1 {513 -32511 386 -32127}} +test binary-39.3 {ScanNumber: sign extension} { + catch {unset arg1} + list [binary scan \x01\x02\x01\x81\x82\x01\x81\x82 S4 arg1] $arg1 +} {1 {258 385 -32255 -32382}} +test binary-39.4 {ScanNumber: sign extension} { + catch {unset arg1} + list [binary scan \x01\x01\x01\x02\x81\x01\x01\x01\x01\x82\x01\x01\x01\x01\x82\x01\x01\x01\x01\x81 i5 arg1] $arg1 +} {1 {33620225 16843137 16876033 25297153 -2130640639}} +test binary-39.5 {ScanNumber: sign extension} { + catch {unset arg1} + list [binary scan \x01\x01\x01\x02\x81\x01\x01\x01\x01\x82\x01\x01\x01\x01\x82\x01\x01\x01\x01\x81 I5 arg1] $arg1 +} {1 {16843010 -2130640639 25297153 16876033 16843137}} + +test binary-40.1 {ScanNumber: floating point overflow} {nonPortable unixOnly} { + catch {unset arg1} + list [binary scan \xff\xff\xff\xff f1 arg1] $arg1 +} {1 -NaN} +test binary-40.2 {ScanNumber: floating point overflow} {nonPortable macOnly} { + catch {unset arg1} + list [binary scan \xff\xff\xff\xff f1 arg1] $arg1 +} {1 -NAN(255)} +test binary-40.3 {ScanNumber: floating point overflow} {nonPortable pcOnly} { + catch {unset arg1} + set result [binary scan \xff\xff\xff\xff f1 arg1] + if {([string compare $arg1 -1.\#QNAN] == 0) + || ([string compare $arg1 -NAN] == 0)} { + lappend result success + } else { + lappend result failure + } +} {1 success} +test binary-40.4 {ScanNumber: floating point overflow} {nonPortable unixOnly} { + catch {unset arg1} + list [binary scan \xff\xff\xff\xff\xff\xff\xff\xff d1 arg1] $arg1 +} {1 -NaN} +test binary-40.5 {ScanNumber: floating point overflow} {nonPortable macOnly} { + catch {unset arg1} + list [binary scan \xff\xff\xff\xff\xff\xff\xff\xff d1 arg1] $arg1 +} {1 -NAN(255)} +test binary-40.6 {ScanNumber: floating point overflow} {nonPortable pcOnly} { + catch {unset arg1} + set result [binary scan \xff\xff\xff\xff\xff\xff\xff\xff d1 arg1] + if {([string compare $arg1 -1.\#QNAN] == 0) + || ([string compare $arg1 -NAN] == 0)} { + lappend result success + } else { + lappend result failure + } +} {1 success} + +test binary-41.1 {ScanNumber: word alignment} { + catch {unset arg1; unset arg2} + list [binary scan \x01\x01\x00 c1s1 arg1 arg2] $arg1 $arg2 +} {2 1 1} +test binary-41.2 {ScanNumber: word alignment} { + catch {unset arg1; unset arg2} + list [binary scan \x01\x00\x01 c1S1 arg1 arg2] $arg1 $arg2 +} {2 1 1} +test binary-41.3 {ScanNumber: word alignment} { + catch {unset arg1; unset arg2} + list [binary scan \x01\x01\x00\x00\x00 c1i1 arg1 arg2] $arg1 $arg2 +} {2 1 1} +test binary-41.4 {ScanNumber: word alignment} { + catch {unset arg1; unset arg2} + list [binary scan \x01\x00\x00\x00\x01 c1I1 arg1 arg2] $arg1 $arg2 +} {2 1 1} +test binary-41.5 {ScanNumber: word alignment} {nonPortable macOrUnix} { + catch {unset arg1; unset arg2} + list [binary scan \x01\x3f\xcc\xcc\xcd c1f1 arg1 arg2] $arg1 $arg2 +} {2 1 1.60000002384} +test binary-41.6 {ScanNumber: word alignment} {nonPortable pcOnly} { + catch {unset arg1; unset arg2} + list [binary scan \x01\xcd\xcc\xcc\x3f c1f1 arg1 arg2] $arg1 $arg2 +} {2 1 1.60000002384} +test binary-41.7 {ScanNumber: word alignment} {nonPortable macOrUnix} { + catch {unset arg1; unset arg2} + list [binary scan \x01\x3f\xf9\x99\x99\x99\x99\x99\x9a c1d1 arg1 arg2] $arg1 $arg2 +} {2 1 1.6} +test binary-41.8 {ScanNumber: word alignment} {nonPortable pcOnly} { + catch {unset arg1; unset arg2} + list [binary scan \x01\x9a\x99\x99\x99\x99\x99\xf9\x3f c1d1 arg1 arg2] $arg1 $arg2 +} {2 1 1.6} diff --git a/tests/case.test b/tests/case.test new file mode 100644 index 0000000..9224372 --- /dev/null +++ b/tests/case.test @@ -0,0 +1,83 @@ +# Commands covered: case +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) case.test 1.13 96/02/16 08:55:41 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test case-1.1 {simple pattern} { + case a in a {format 1} b {format 2} c {format 3} default {format 4} +} 1 +test case-1.2 {simple pattern} { + case b a {format 1} b {format 2} c {format 3} default {format 4} +} 2 +test case-1.3 {simple pattern} { + case x in a {format 1} b {format 2} c {format 3} default {format 4} +} 4 +test case-1.4 {simple pattern} { + case x a {format 1} b {format 2} c {format 3} +} {} +test case-1.5 {simple pattern matches many times} { + case b a {format 1} b {format 2} b {format 3} b {format 4} +} 2 +test case-1.6 {fancier pattern} { + case cx a {format 1} *c {format 2} *x {format 3} default {format 4} +} 3 +test case-1.7 {list of patterns} { + case abc in {a b c} {format 1} {def abc ghi} {format 2} +} 2 + +test case-2.1 {error in executed command} { + list [catch {case a in a {error "Just a test"} default {format 1}} msg] \ + $msg $errorInfo +} {1 {Just a test} {Just a test + while executing +"error "Just a test"" + ("a" arm line 1) + invoked from within +"case a in a {error "Just a test"} default {format 1}"}} +test case-2.2 {error: not enough args} { + list [catch {case} msg] $msg +} {1 {wrong # args: should be "case string ?in? patList body ... ?default body?"}} +test case-2.3 {error: pattern with no body} { + list [catch {case a b} msg] $msg +} {1 {extra case pattern with no body}} +test case-2.4 {error: pattern with no body} { + list [catch {case a in b {format 1} c} msg] $msg +} {1 {extra case pattern with no body}} +test case-2.5 {error in default command} { + list [catch {case foo in a {error case1} default {error case2} \ + b {error case 3}} msg] $msg $errorInfo +} {1 case2 {case2 + while executing +"error case2" + ("default" arm line 1) + invoked from within +"case foo in a {error case1} default {error case2} b {error case 3}"}} + +test case-3.1 {single-argument form for pattern/command pairs} { + case b in { + a {format 1} + b {format 2} + default {format 6} + } +} {2} +test case-3.2 {single-argument form for pattern/command pairs} { + case b { + a {format 1} + b {format 2} + default {format 6} + } +} {2} +test case-3.3 {single-argument form for pattern/command pairs} { + list [catch {case z in {a 2 b}} msg] $msg +} {1 {extra case pattern with no body}} diff --git a/tests/clock.test b/tests/clock.test new file mode 100644 index 0000000..95f73ac --- /dev/null +++ b/tests/clock.test @@ -0,0 +1,175 @@ +# Commands covered: clock +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1995-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) clock.test 1.17 97/11/24 15:05:38 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test clock-1.1 {clock tests} { + list [catch {clock} msg] $msg +} {1 {wrong # args: should be "clock option ?arg ...?"}} +test clock-1.2 {clock tests} { + list [catch {clock foo} msg] $msg +} {1 {bad option "foo": must be clicks, format, scan, or seconds}} + +# clock clicks +test clock-2.1 {clock clicks tests} { + expr [clock clicks]+1 + concat {} +} {} +test clock-2.2 {clock clicks tests} { + list [catch {clock clicks foo} msg] $msg +} {1 {wrong # args: should be "clock clicks"}} +test clock-2.3 {clock clicks tests} { + set start [clock clicks] + after 10 + set end [clock clicks] + expr "$end > $start" +} {1} + +# clock format +test clock-3.1 {clock format tests} {unixOnly} { + set clockval 657687766 + clock format $clockval -format {%a %b %d %I:%M:%S %p %Y} -gmt true +} {Sun Nov 04 03:02:46 AM 1990} +test clock-3.2 {clock format tests} { + list [catch {clock format} msg] $msg +} {1 {wrong # args: should be "clock format clockval ?-format string? ?-gmt boolean?"}} +test clock-3.3 {clock format tests} { + list [catch {clock format foo} msg] $msg +} {1 {expected integer but got "foo"}} +test clock-3.4 {clock format tests} {unixOrPc} { + set clockval 657687766 + clock format $clockval -format "%a %b %d %I:%M:%S %p %Y" -gmt true +} "Sun Nov 04 03:02:46 AM 1990" +test clock-3.5 {clock format tests} { + list [catch {clock format a b c d e g} msg] $msg +} {1 {wrong # args: should be "clock format clockval ?-format string? ?-gmt boolean?"}} +test clock-3.6 {clock format tests} {unixOrPc nonPortable} { + set clockval -1 + clock format $clockval -format "%a %b %d %I:%M:%S %p %Y" -gmt true +} "Wed Dec 31 11:59:59 PM 1969" +test clock-3.7 {clock format tests} { + list [catch {clock format 123 -bad arg} msg] $msg +} {1 {bad switch "-bad": must be -format, or -gmt}} +test clock-3.8 {clock format tests} { + clock format 123 -format "x" +} x +test clock-3.9 {clock format tests} { + clock format 123 -format "" +} "" + +# clock scan +test clock-4.1 {clock scan tests} { + list [catch {clock scan} msg] $msg +} {1 {wrong # args: should be "clock scan dateString ?-base clockValue? ?-gmt boolean?"}} +test clock-4.2 {clock scan tests} { + list [catch {clock scan "bad-string"} msg] $msg +} {1 {unable to convert date-time string "bad-string"}} +test clock-4.3 {clock scan tests} { + clock format [clock scan "14 Feb 92" -gmt true] \ + -format {%m/%d/%y %I:%M:%S %p} -gmt true +} {02/14/92 12:00:00 AM} +test clock-4.4 {clock scan tests} { + clock format [clock scan "Feb 14, 1992 12:20 PM" -gmt true] \ + -format {%m/%d/%y %I:%M:%S %p} -gmt true +} {02/14/92 12:20:00 PM} +test clock-4.5 {clock scan tests} { + clock format \ + [clock scan "Feb 14, 1992 12:20 PM" -base 319363200 -gmt true] \ + -format {%m/%d/%y %I:%M:%S %p} -gmt true +} {02/14/92 12:20:00 PM} +test clock-4.6 {clock scan tests} { + set time [clock scan "Oct 23,1992 15:00"] + clock format $time -format {%b %d,%Y %H:%M} +} {Oct 23,1992 15:00} +test clock-4.7 {clock scan tests} { + set time [clock scan "Oct 23,1992 15:00 GMT"] + clock format $time -format {%b %d,%Y %H:%M GMT} -gmt true +} {Oct 23,1992 15:00 GMT} +test clock-4.8 {clock scan tests} { + set time [clock scan "Oct 23,1992 15:00" -gmt true] + clock format $time -format {%b %d,%Y %H:%M GMT} -gmt true +} {Oct 23,1992 15:00 GMT} +test clock-4.9 {clock scan tests} { + list [catch {clock scan "Jan 12" -bad arg} msg] $msg +} {1 {bad switch "-bad": must be -base, or -gmt}} +# The following two two tests test the two year date policy +test clock-4.10 {clock scan tests} { + set time [clock scan "1/1/71" -gmt true] + clock format $time -format {%b %d,%Y %H:%M GMT} -gmt true +} {Jan 01,1971 00:00 GMT} +test clock-4.11 {clock scan tests} { + set time [clock scan "1/1/37" -gmt true] + clock format $time -format {%b %d,%Y %H:%M GMT} -gmt true +} {Jan 01,2037 00:00 GMT} + +# clock seconds +test clock-5.1 {clock seconds tests} { + expr [clock seconds]+1 + concat {} +} {} +test clock-5.2 {clock seconds tests} { + list [catch {clock seconds foo} msg] $msg +} {1 {wrong # args: should be "clock seconds"}} +test clock-5.3 {clock seconds tests} { + set start [clock seconds] + after 2000 + set end [clock seconds] + expr "$end > $start" +} {1} + +# The following dates check certain roll over dates +set day [expr 24 * 60 * 60] +test clock-6.1 {clock roll over dates} { + set time [clock scan "12/31/1998" -gmt true] + clock format [expr $time + $day] -format {%b %d,%Y %H:%M GMT} -gmt true +} {Jan 01,1999 00:00 GMT} +test clock-6.2 {clock roll over dates} { + set time [clock scan "12/31/1999" -gmt true] + clock format [expr $time + $day] -format {%b %d,%Y %H:%M GMT} -gmt true +} {Jan 01,2000 00:00 GMT} +test clock-6.3 {clock roll over dates} { + set time [clock scan "2/28/2000" -gmt true] + clock format [expr $time + $day] -format {%b %d,%Y %H:%M GMT} -gmt true +} {Feb 29,2000 00:00 GMT} +test clock-6.4 {clock roll over dates} { + set time [clock scan "2/29/2000" -gmt true] + clock format [expr $time + $day] -format {%b %d,%Y %H:%M GMT} -gmt true +} {Mar 01,2000 00:00 GMT} +test clock-6.5 {clock roll over dates} { + set time [clock scan "January 1, 2000" -gmt true] + clock format $time -format %A -gmt true +} {Saturday} +test clock-6.6 {clock roll over dates} { + set time [clock scan "January 1, 2000" -gmt true] + clock format $time -format %j -gmt true +} {001} +test clock-6.7 {clock roll over dates} { + set time [clock scan "February 29, 2000" -gmt true] + clock format $time -format %A -gmt true +} {Tuesday} +test clock-6.8 {clock roll over dates} { + set time [clock scan "February 29, 2000" -gmt true] + clock format $time -format %j -gmt true +} {060} +test clock-6.9 {clock roll over dates} { + set time [clock scan "March 1, 2000" -gmt true] + clock format $time -format %A -gmt true +} {Wednesday} +test clock-6.10 {clock roll over dates} { + set time [clock scan "March 1, 2000" -gmt true] + clock format $time -format %j -gmt true +} {061} +test clock-6.11 {clock roll over dates} { + set time [clock scan "March 1, 2001" -gmt true] + clock format $time -format %j -gmt true +} {060} diff --git a/tests/cmdAH.test b/tests/cmdAH.test new file mode 100644 index 0000000..351008e --- /dev/null +++ b/tests/cmdAH.test @@ -0,0 +1,1256 @@ +# The file tests the tclCmdAH.c file. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996-1997 by Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) cmdAH.test 1.35 97/07/22 14:07:43 + +if {[string compare test [info procs test]] == 1} then {source defs} + +global env +set platform [testgetplatform] + +test cmdAH-1.1 {Tcl_FileObjCmd} { + list [catch file msg] $msg +} {1 {wrong # args: should be "file option ?arg ...?"}} +test cmdAH-1.2 {Tcl_FileObjCmd} { + list [catch {file x} msg] $msg +} {1 {bad option "x": must be atime, attributes, copy, delete, dirname, executable, exists, extension, isdirectory, isfile, join, lstat, mtime, mkdir, nativename, owned, pathtype, readable, readlink, rename, rootname, size, split, stat, tail, type, volumes, or writable}} +test cmdAH-1.3 {Tcl_FileObjCmd} { + list [catch {file atime} msg] $msg +} {1 {wrong # args: should be "file atime name ?arg ...?"}} + + +#volume + +test cmdAH-2.1 {Tcl_FileObjCmd: volumes} { + list [catch {file volumes x} msg] $msg +} {1 {wrong # args: should be "file volumes"}} +test cmdAH-2.2 {Tcl_FileObjCmd: volumes} { + set volumeList [file volumes] + if { [llength $volumeList] == 0 } { + set result 0 + } else { + set result 1 + } +} {1} +test cmdAH-2.3 {Tcl_FileObjCmd: volumes} {macOrUnix} { + set volumeList [file volumes] + catch [list glob -nocomplain [lindex $volumeList 0]*] +} {0} +test cmdAH-2.4 {Tcl_FileObjCmd: volumes} {pcOnly} { + set volumeList [file volumes] + list [catch {lsearch $volumeList "c:/"} element] [expr $element != -1] [catch {list glob -nocomplain [lindex $volumeList $element]*}] +} {0 1 0} + +# attributes + +test cmdAH-3.1 {Tcl_FileObjCmd - file attrs} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file}] [file delete -force foo.file] +} {0 {}} + +# dirname + +test cmdAH-4.1 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname a b} msg] $msg +} {1 {wrong # args: should be "file dirname name"}} +test cmdAH-4.2 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + file dirname /a/b +} /a +test cmdAH-4.3 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + file dirname {} +} . +test cmdAH-4.4 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + file dirname {} +} : +test cmdAH-4.5 {Tcl_FileObjCmd: dirname} { + testsetplatform win + file dirname {} +} . +test cmdAH-4.6 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + file dirname .def +} . +test cmdAH-4.7 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + file dirname a +} : +test cmdAH-4.8 {Tcl_FileObjCmd: dirname} { + testsetplatform win + file dirname a +} . +test cmdAH-4.9 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + file dirname a/b/c.d +} a/b +test cmdAH-4.10 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + file dirname a/b.c/d +} a/b.c +test cmdAH-4.11 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + file dirname /. +} / +test cmdAH-4.12 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname /} msg] $msg +} {0 /} +test cmdAH-4.13 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname /foo} msg] $msg +} {0 /} +test cmdAH-4.14 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname //foo} msg] $msg +} {0 /} +test cmdAH-4.15 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname //foo/bar} msg] $msg +} {0 /foo} +test cmdAH-4.16 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname {//foo\/bar/baz}} msg] $msg +} {0 {/foo\/bar}} +test cmdAH-4.17 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname {//foo\/bar/baz/blat}} msg] $msg +} {0 {/foo\/bar/baz}} +test cmdAH-4.18 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname /foo//} msg] $msg +} {0 /} +test cmdAH-4.19 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname ./a} msg] $msg +} {0 .} +test cmdAH-4.20 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname a/.a} msg] $msg +} {0 a} +test cmdAH-4.21 {Tcl_FileObjCmd: dirname} { + testsetplatform windows + list [catch {file dirname c:foo} msg] $msg +} {0 c:} +test cmdAH-4.22 {Tcl_FileObjCmd: dirname} { + testsetplatform windows + list [catch {file dirname c:} msg] $msg +} {0 c:} +test cmdAH-4.23 {Tcl_FileObjCmd: dirname} { + testsetplatform windows + list [catch {file dirname c:/} msg] $msg +} {0 c:/} +test cmdAH-4.24 {Tcl_FileObjCmd: dirname} { + testsetplatform windows + list [catch {file dirname {c:\foo}} msg] $msg +} {0 c:/} +test cmdAH-4.25 {Tcl_FileObjCmd: dirname} { + testsetplatform windows + list [catch {file dirname {//foo/bar/baz}} msg] $msg +} {0 //foo/bar} +test cmdAH-4.26 {Tcl_FileObjCmd: dirname} { + testsetplatform windows + list [catch {file dirname {//foo/bar}} msg] $msg +} {0 //foo/bar} +test cmdAH-4.27 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname :} msg] $msg +} {0 :} +test cmdAH-4.28 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname :Foo} msg] $msg +} {0 :} +test cmdAH-4.29 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname Foo:} msg] $msg +} {0 Foo:} +test cmdAH-4.30 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname Foo:bar} msg] $msg +} {0 Foo:} +test cmdAH-4.31 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname :Foo:bar} msg] $msg +} {0 :Foo} +test cmdAH-4.32 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname ::} msg] $msg +} {0 :} +test cmdAH-4.33 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname :::} msg] $msg +} {0 ::} +test cmdAH-4.34 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname /foo/bar/} msg] $msg +} {0 foo:} +test cmdAH-4.35 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname /foo/bar} msg] $msg +} {0 foo:} +test cmdAH-4.36 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname /foo} msg] $msg +} {0 foo:} +test cmdAH-4.37 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname foo} msg] $msg +} {0 :} +test cmdAH-4.38 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname ~/foo} msg] $msg +} {0 ~} +test cmdAH-4.39 {Tcl_FileObjCmd: dirname} { + testsetplatform unix + list [catch {file dirname ~bar/foo} msg] $msg +} {0 ~bar} +test cmdAH-4.40 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname ~bar/foo} msg] $msg +} {0 ~bar:} +test cmdAH-4.41 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname ~/foo} msg] $msg +} {0 ~:} +test cmdAH-4.42 {Tcl_FileObjCmd: dirname} { + testsetplatform mac + list [catch {file dirname ~:baz} msg] $msg +} {0 ~:} +test cmdAH-4.43 {Tcl_FileObjCmd: dirname} { + global env + set temp $env(HOME) + set env(HOME) "/home/test" + testsetplatform unix + set result [list [catch {file dirname ~} msg] $msg] + set env(HOME) $temp + set result +} {0 /home} +test cmdAH-4.44 {Tcl_FileObjCmd: dirname} { + global env + set temp $env(HOME) + set env(HOME) "~" + testsetplatform unix + set result [list [catch {file dirname ~} msg] $msg] + set env(HOME) $temp + set result +} {0 ~} +test cmdAH-4.45 {Tcl_FileObjCmd: dirname} { + global env + set temp $env(HOME) + set env(HOME) "/home/test" + testsetplatform windows + set result [list [catch {file dirname ~} msg] $msg] + set env(HOME) $temp + set result +} {0 /home} +test cmdAH-4.46 {Tcl_FileObjCmd: dirname} { + global env + set temp $env(HOME) + set env(HOME) "/home/test" + testsetplatform mac + set result [list [catch {file dirname ~} msg] $msg] + set env(HOME) $temp + set result +} {0 home:} + +# tail + +test cmdAH-5.1 {Tcl_FileObjCmd: tail} { + testsetplatform unix + list [catch {file tail a b} msg] $msg +} {1 {wrong # args: should be "file tail name"}} +test cmdAH-5.2 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail /a/b +} b +test cmdAH-5.3 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail {} +} {} +test cmdAH-5.4 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail {} +} {} +test cmdAH-5.5 {Tcl_FileObjCmd: tail} { + testsetplatform win + file tail {} +} {} +test cmdAH-5.6 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail .def +} .def +test cmdAH-5.7 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail a +} a +test cmdAH-5.8 {Tcl_FileObjCmd: tail} { + testsetplatform win + file tail a +} a +test cmdAH-5.9 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file ta a/b/c.d +} c.d +test cmdAH-5.10 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail a/b.c/d +} d +test cmdAH-5.11 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail /. +} . +test cmdAH-5.12 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail / +} {} +test cmdAH-5.13 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail /foo +} foo +test cmdAH-5.14 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail //foo +} foo +test cmdAH-5.15 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail //foo/bar +} bar +test cmdAH-5.16 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail {//foo\/bar/baz} +} baz +test cmdAH-5.17 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail {//foo\/bar/baz/blat} +} blat +test cmdAH-5.18 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail /foo// +} foo +test cmdAH-5.19 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail ./a +} a +test cmdAH-5.20 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail a/.a +} .a +test cmdAH-5.21 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail c:foo +} foo +test cmdAH-5.22 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail c: +} {} +test cmdAH-5.23 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail c:/ +} {} +test cmdAH-5.24 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail {c:\foo} +} foo +test cmdAH-5.25 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail {//foo/bar/baz} +} baz +test cmdAH-5.26 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail {//foo/bar} +} {} +test cmdAH-5.27 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail : +} : +test cmdAH-5.28 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail :Foo +} Foo +test cmdAH-5.29 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail Foo: +} {} +test cmdAH-5.30 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail Foo:bar +} bar +test cmdAH-5.31 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail :Foo:bar +} bar +test cmdAH-5.32 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail :: +} :: +test cmdAH-5.33 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail ::: +} :: +test cmdAH-5.34 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail /foo/bar/ +} bar +test cmdAH-5.35 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail /foo/bar +} bar +test cmdAH-5.36 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail /foo +} {} +test cmdAH-5.37 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail foo +} foo +test cmdAH-5.38 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail ~:foo +} foo +test cmdAH-5.39 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail ~bar:foo +} foo +test cmdAH-5.40 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail ~bar/foo +} foo +test cmdAH-5.41 {Tcl_FileObjCmd: tail} { + testsetplatform mac + file tail ~/foo +} foo +test cmdAH-5.42 {Tcl_FileObjCmd: tail} { + global env + set temp $env(HOME) + set env(HOME) "/home/test" + testsetplatform unix + set result [file tail ~] + set env(HOME) $temp + set result +} test +test cmdAH-5.43 {Tcl_FileObjCmd: tail} { + global env + set temp $env(HOME) + set env(HOME) "~" + testsetplatform unix + set result [file tail ~] + set env(HOME) $temp + set result +} {} +test cmdAH-5.44 {Tcl_FileObjCmd: tail} { + global env + set temp $env(HOME) + set env(HOME) "/home/test" + testsetplatform windows + set result [file tail ~] + set env(HOME) $temp + set result +} test +test cmdAH-5.45 {Tcl_FileObjCmd: tail} { + global env + set temp $env(HOME) + set env(HOME) "/home/test" + testsetplatform mac + set result [file tail ~] + set env(HOME) $temp + set result +} test +test cmdAH-5.46 {Tcl_FileObjCmd: tail} { + testsetplatform unix + file tail {f.oo\bar/baz.bat} +} baz.bat +test cmdAH-5.47 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail c:foo +} foo +test cmdAH-5.48 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail c: +} {} +test cmdAH-5.49 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail c:/foo +} foo +test cmdAH-5.50 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail {c:/foo\bar} +} bar +test cmdAH-5.51 {Tcl_FileObjCmd: tail} { + testsetplatform windows + file tail {foo\bar} +} bar + +# rootname + +test cmdAH-6.1 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + list [catch {file rootname a b} msg] $msg +} {1 {wrong # args: should be "file rootname name"}} +test cmdAH-6.2 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file rootname {} +} {} +test cmdAH-6.3 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file ro foo +} foo +test cmdAH-6.4 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file rootname foo. +} foo +test cmdAH-6.5 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file rootname .foo +} {} +test cmdAH-6.6 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file rootname abc.def +} abc +test cmdAH-6.7 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file rootname abc.def.ghi +} abc.def +test cmdAH-6.8 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file rootname a/b/c.d +} a/b/c +test cmdAH-6.9 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file rootname a/b.c/d +} a/b.c/d +test cmdAH-6.10 {Tcl_FileObjCmd: rootname} { + testsetplatform unix + file rootname a/b.c/ +} a/b.c/ +test cmdAH-6.11 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file ro foo +} foo +test cmdAH-6.12 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname {} +} {} +test cmdAH-6.13 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname foo. +} foo +test cmdAH-6.14 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname .foo +} {} +test cmdAH-6.15 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname abc.def +} abc +test cmdAH-6.16 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname abc.def.ghi +} abc.def +test cmdAH-6.17 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname a:b:c.d +} a:b:c +test cmdAH-6.18 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname a:b.c:d +} a:b.c:d +test cmdAH-6.19 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname a/b/c.d +} a/b/c +test cmdAH-6.20 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname a/b.c/d +} a/b.c/d +test cmdAH-6.21 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname /a.b +} /a +test cmdAH-6.22 {Tcl_FileObjCmd: rootname} { + testsetplatform mac + file rootname foo.c: +} foo.c: +test cmdAH-6.23 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname {} +} {} +test cmdAH-6.24 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file ro foo +} foo +test cmdAH-6.25 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname foo. +} foo +test cmdAH-6.26 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname .foo +} {} +test cmdAH-6.27 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname abc.def +} abc +test cmdAH-6.28 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname abc.def.ghi +} abc.def +test cmdAH-6.29 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname a/b/c.d +} a/b/c +test cmdAH-6.30 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname a/b.c/d +} a/b.c/d +test cmdAH-6.31 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname a\\b.c\\ +} a\\b.c\\ +test cmdAH-6.32 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname a\\b\\c.d +} a\\b\\c +test cmdAH-6.33 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname a\\b.c\\d +} a\\b.c\\d +test cmdAH-6.34 {Tcl_FileObjCmd: rootname} { + testsetplatform windows + file rootname a\\b.c\\ +} a\\b.c\\ +set num 35 +foreach outer { {} a .a a. a.a } { + foreach inner { {} a .a a. a.a } { + set thing [format %s/%s $outer $inner] +; test cmdAH-6.$num {Tcl_FileObjCmd: rootname and extension options} { + testsetplatform unix + format %s%s [file rootname $thing] [file ext $thing] + } $thing + set num [expr $num+1] + } +} + +# extension + +test cmdAH-7.1 {Tcl_FileObjCmd: extension} { + testsetplatform unix + list [catch {file extension a b} msg] $msg +} {1 {wrong # args: should be "file extension name"}} +test cmdAH-7.2 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file extension {} +} {} +test cmdAH-7.3 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file ext foo +} {} +test cmdAH-7.4 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file extension foo. +} . +test cmdAH-7.5 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file extension .foo +} .foo +test cmdAH-7.6 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file extension abc.def +} .def +test cmdAH-7.7 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file extension abc.def.ghi +} .ghi +test cmdAH-7.8 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file extension a/b/c.d +} .d +test cmdAH-7.9 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file extension a/b.c/d +} {} +test cmdAH-7.10 {Tcl_FileObjCmd: extension} { + testsetplatform unix + file extension a/b.c/ +} {} +test cmdAH-7.11 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file ext foo +} {} +test cmdAH-7.12 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension {} +} {} +test cmdAH-7.13 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension foo. +} . +test cmdAH-7.14 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension .foo +} .foo +test cmdAH-7.15 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension abc.def +} .def +test cmdAH-7.16 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension abc.def.ghi +} .ghi +test cmdAH-7.17 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension a:b:c.d +} .d +test cmdAH-7.18 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension a:b.c:d +} {} +test cmdAH-7.19 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension a/b/c.d +} .d +test cmdAH-7.20 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension a/b.c/d +} {} +test cmdAH-7.21 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension /a.b +} .b +test cmdAH-7.22 {Tcl_FileObjCmd: extension} { + testsetplatform mac + file extension foo.c: +} {} +test cmdAH-7.23 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension {} +} {} +test cmdAH-7.24 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file ext foo +} {} +test cmdAH-7.25 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension foo. +} . +test cmdAH-7.26 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension .foo +} .foo +test cmdAH-7.27 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension abc.def +} .def +test cmdAH-7.28 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension abc.def.ghi +} .ghi +test cmdAH-7.29 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension a/b/c.d +} .d +test cmdAH-7.30 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension a/b.c/d +} {} +test cmdAH-7.31 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension a\\b.c\\ +} {} +test cmdAH-7.32 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension a\\b\\c.d +} .d +test cmdAH-7.33 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension a\\b.c\\d +} {} +test cmdAH-7.34 {Tcl_FileObjCmd: extension} { + testsetplatform windows + file extension a\\b.c\\ +} {} +set num 35 +foreach value {a..b a...b a.c..b ..b} result {..b ...b ..b ..b} { + foreach p {unix mac windows} { +; test cmdAH-7.$num {Tcl_FileObjCmd: extension} " + testsetplatform $p + file extension $value + " $result + incr num + } +} + +# pathtype + +test cmdAH-8.1 {Tcl_FileObjCmd: pathtype} { + testsetplatform unix + list [catch {file pathtype a b} msg] $msg +} {1 {wrong # args: should be "file pathtype name"}} +test cmdAH-8.2 {Tcl_FileObjCmd: pathtype} { + testsetplatform unix + file pathtype /a +} absolute +test cmdAH-8.3 {Tcl_FileObjCmd: pathtype} { + testsetplatform unix + file p a +} relative +test cmdAH-8.4 {Tcl_FileObjCmd: pathtype} { + testsetplatform windows + file pathtype c:a +} volumerelative + +# split + +test cmdAH-9.1 {Tcl_FileObjCmd: split} { + testsetplatform unix + list [catch {file split a b} msg] $msg +} {1 {wrong # args: should be "file split name"}} +test cmdAH-9.2 {Tcl_FileObjCmd: split} { + testsetplatform unix + file split a +} a +test cmdAH-9.3 {Tcl_FileObjCmd: split} { + testsetplatform unix + file split a/b +} {a b} + +# join + +test cmdAH-10.1 {Tcl_FileObjCmd: join} { + testsetplatform unix + file join a +} a +test cmdAH-10.2 {Tcl_FileObjCmd: join} { + testsetplatform unix + file join a b +} a/b +test cmdAH-10.3 {Tcl_FileObjCmd: join} { + testsetplatform unix + file join a b c d +} a/b/c/d + +# error handling of Tcl_TranslateFileName + +test cmdAH-11.1 {Tcl_FileObjCmd} { + testsetplatform unix + list [catch {file atime ~_bad_user} msg] $msg +} {1 {user "_bad_user" doesn't exist}} + +testsetplatform $platform +makeFile abcde gorp.file +makeDirectory dir.file + +# readable + +test cmdAH-12.1 {Tcl_FileObjCmd: readable} { + list [catch {file readable a b} msg] $msg +} {1 {wrong # args: should be "file readable name"}} +testchmod 444 gorp.file +test cmdAH-12.2 {Tcl_FileObjCmd: readable} { + file readable gorp.file +} 1 +testchmod 333 gorp.file +test cmdAH-12.3 {Tcl_FileObjCmd: readable} {unixOnly && !root} { + file reada gorp.file +} 0 + +# writable + +test cmdAH-13.1 {Tcl_FileObjCmd: writable} { + list [catch {file writable a b} msg] $msg +} {1 {wrong # args: should be "file writable name"}} +testchmod 555 gorp.file +test cmdAH-13.2 {Tcl_FileObjCmd: writable} {!root} { + file writable gorp.file +} 0 +testchmod 222 gorp.file +test cmdAH-13.3 {Tcl_FileObjCmd: writable} { + file writable gorp.file +} 1 + +# executable + +file delete -force dir.file gorp.file +file mkdir dir.file +makeFile abcde gorp.file + +test cmdAH-14.1 {Tcl_FileObjCmd: executable} { + list [catch {file executable a b} msg] $msg +} {1 {wrong # args: should be "file executable name"}} +test cmdAH-14.2 {Tcl_FileObjCmd: executable} { + file executable gorp.file +} 0 +test cmdAH-14.3 {Tcl_FileObjCmd: executable} {unix} { + # Only on unix will setting the execute bit on a regular file + # cause that file to be executable. + + testchmod 775 gorp.file + file exe gorp.file +} 1 + +test cmdAH-14.4 {Tcl_FileObjCmd: executable} {mac} { + # On mac, the only executable files are of type APPL. + + set x [file exe gorp.file] + file attrib gorp.file -type APPL + lappend x [file exe gorp.file] +} {0 1} +test cmdAH-14.5 {Tcl_FileObjCmd: executable} {pc} { + # On pc, must be a .exe, .com, etc. + + set x [file exe gorp.file] + makeFile foo gorp.exe + lappend x [file exe gorp.exe] + file delete gorp.exe + set x +} {0 1} +test cmdAH-14.6 {Tcl_FileObjCmd: executable} { + # Directories are always executable. + + file exe dir.file +} 1 + +file delete -force dir.file +file delete gorp.file +file delete link.file +# exists + +test cmdAH-15.1 {Tcl_FileObjCmd: exists} { + list [catch {file exists a b} msg] $msg +} {1 {wrong # args: should be "file exists name"}} +test cmdAH-15.2 {Tcl_FileObjCmd: exists} {file exists gorp.file} 0 +test cmdAH-15.3 {Tcl_FileObjCmd: exists} { + file exists [file join dir.file gorp.file] +} 0 +catch { + makeFile abcde gorp.file + makeDirectory dir.file + makeFile 12345 [file join dir.file gorp.file] +} +test cmdAH-15.4 {Tcl_FileObjCmd: exists} { + file exists gorp.file +} 1 +test cmdAH-15.5 {Tcl_FileObjCmd: exists} { + file exists [file join dir.file gorp.file] +} 1 + +# nativename +test cmdAH-15.6 {Tcl_FileObjCmd: nativename} { + testsetplatform unix + list [catch {file nativename a/b} msg] $msg [testsetplatform $platform] +} {0 a/b {}} +test cmdAH-15.7 {Tcl_FileObjCmd: nativename} { + testsetplatform windows + list [catch {file nativename a/b} msg] $msg [testsetplatform $platform] +} {0 {a\b} {}} +test cmdAH-15.8 {Tcl_FileObjCmd: nativename} { + testsetplatform mac + list [catch {file nativename a/b} msg] $msg [testsetplatform $platform] +} {0 :a:b {}} + +test cmdAH-15.9 {Tcl_FileObjCmd: ~ : exists} { + file exists ~nOsUcHuSeR +} 0 +test cmdAH-15.10 {Tcl_FileObjCmd: ~ : nativename} { + # should probably be 0 in fact... + catch {file nativename ~nOsUcHuSeR} +} 1 + +# The test below has to be done in /tmp rather than the current +# directory in order to guarantee (?) a local file system: some +# NFS file systems won't do the stuff below correctly. + +if {$tcl_platform(platform) == "unix"} { + file delete /tmp/tcl.foo.dir/file + removeDirectory /tmp/tcl.foo.dir + makeDirectory /tmp/tcl.foo.dir + makeFile 12345 /tmp/tcl.foo.dir/file + exec chmod 000 /tmp/tcl.foo.dir + if {$user != "root"} { + test cmdAH-15.9 {Tcl_FileObjCmd: exists} { + file exists /tmp/tcl.foo.dir/file + } 0 + } + exec chmod 775 /tmp/tcl.foo.dir + file delete /tmp/tcl.foo.dir/file + removeDirectory /tmp/tcl.foo.dir +} + +# Stat related commands + +testsetplatform $platform +file delete gorp.file +makeFile "Test string" gorp.file +catch {exec chmod 765 gorp.file} + +# atime + +test cmdAH-16.1 {Tcl_FileObjCmd: atime} { + list [catch {file atime a b} msg] $msg +} {1 {wrong # args: should be "file atime name"}} +test cmdAH-16.2 {Tcl_FileObjCmd: atime} { + catch {unset stat} + file stat gorp.file stat + list [expr {[file mtime gorp.file] == $stat(mtime)}] \ + [expr {[file atime gorp.file] == $stat(atime)}] +} {1 1} +test cmdAH-16.3 {Tcl_FileObjCmd: atime} { + string tolower [list [catch {file atime _bogus_} msg] \ + $msg $errorCode] +} {1 {couldn't stat "_bogus_": no such file or directory} {posix enoent {no such file or directory}}} + +# isdirectory + +test cmdAH-17.1 {Tcl_FileObjCmd: isdirectory} { + list [catch {file isdirectory a b} msg] $msg +} {1 {wrong # args: should be "file isdirectory name"}} +test cmdAH-17.2 {Tcl_FileObjCmd: isdirectory} { + file isdirectory gorp.file +} 0 +test cmdAH-17.3 {Tcl_FileObjCmd: isdirectory} { + file isd dir.file +} 1 + +# isfile + +test cmdAH-18.1 {Tcl_FileObjCmd: isfile} { + list [catch {file isfile a b} msg] $msg +} {1 {wrong # args: should be "file isfile name"}} +test cmdAH-18.2 {Tcl_FileObjCmd: isfile} {file isfile gorp.file} 1 +test cmdAH-18.3 {Tcl_FileObjCmd: isfile} {file isfile dir.file} 0 + +# lstat and readlink: don't run these tests everywhere, since not all +# sites will have symbolic links + +catch {exec ln -s gorp.file link.file} +test cmdAH-19.1 {Tcl_FileObjCmd: lstat} { + list [catch {file lstat a} msg] $msg +} {1 {wrong # args: should be "file lstat name varName"}} +test cmdAH-19.2 {Tcl_FileObjCmd: lstat} { + list [catch {file lstat a b c} msg] $msg +} {1 {wrong # args: should be "file lstat name varName"}} +test cmdAH-19.3 {Tcl_FileObjCmd: lstat} {unixOnly nonPortable} { + catch {unset stat} + file lstat link.file stat + lsort [array names stat] +} {atime ctime dev gid ino mode mtime nlink size type uid} +test cmdAH-19.4 {Tcl_FileObjCmd: lstat} {unixOnly nonPortable} { + catch {unset stat} + file lstat link.file stat + list $stat(nlink) [expr $stat(mode)&0777] $stat(type) +} {1 511 link} +test cmdAH-19.5 {Tcl_FileObjCmd: lstat errors} {nonPortable} { + string tolower [list [catch {file lstat _bogus_ stat} msg] \ + $msg $errorCode] +} {1 {couldn't lstat "_bogus_": no such file or directory} {posix enoent {no such file or directory}}} +test cmdAH-19.6 {Tcl_FileObjCmd: lstat errors} { + catch {unset x} + set x 44 + list [catch {file lstat gorp.file x} msg] $msg $errorCode +} {1 {can't set "x(dev)": variable isn't array} NONE} +catch {unset stat} + +# mtime + +test cmdAH-20.1 {Tcl_FileObjCmd: mtime} { + list [catch {file mtime a b} msg] $msg +} {1 {wrong # args: should be "file mtime name"}} +test cmdAH-20.2 {Tcl_FileObjCmd: mtime} { + set old [file mtime gorp.file] + after 2000 + set f [open gorp.file w] + puts $f "More text" + close $f + set new [file mtime gorp.file] + expr {($new > $old) && ($new <= ($old+5))} +} {1} +test cmdAH-20.3 {Tcl_FileObjCmd: mtime} { + catch {unset stat} + file stat gorp.file stat + list [expr {[file mtime gorp.file] == $stat(mtime)}] \ + [expr {[file atime gorp.file] == $stat(atime)}] +} {1 1} +test cmdAH-20.4 {Tcl_FileObjCmd: mtime} { + string tolower [list [catch {file mtime _bogus_} msg] $msg \ + $errorCode] +} {1 {couldn't stat "_bogus_": no such file or directory} {posix enoent {no such file or directory}}} +test cmdAH-20.5 {Tcl_FileObjCmd: mtime} { + # Under Unix, use a file in /tmp to avoid clock skew due to NFS. + # On other platforms, just use a file in the local directory. + + if {$tcl_platform(platform) == "unix"} { + set name /tmp/tcl.test + } else { + set name tf + } + + # Borland file times were off by timezone. Make sure that a new file's + # time is correct. 10 seconds variance is allowed used due to slow + # networks or clock skew on a network drive. + + file delete -force $name + close [open $name w] + set a [expr abs([clock seconds]-[file mtime $name])<10] + file delete $name + set a +} {1} + + +# owned + +test cmdAH-21.1 {Tcl_FileObjCmd: owned} { + list [catch {file owned a b} msg] $msg +} {1 {wrong # args: should be "file owned name"}} +test cmdAH-21.2 {Tcl_FileObjCmd: owned} { + file owned gorp.file +} 1 +test cmdAH-21.3 {Tcl_FileObjCmd: owned} {unixOnly && !root} { + file owned / +} 0 + +# readlink + +test cmdAH-22.1 {Tcl_FileObjCmd: readlink} { + list [catch {file readlink a b} msg] $msg +} {1 {wrong # args: should be "file readlink name"}} +test cmdAH-22.2 {Tcl_FileObjCmd: readlink} {unixOnly nonPortable} { + file readlink link.file +} gorp.file +test cmdAH-22.3 {Tcl_FileObjCmd: readlink errors} {unixOnly nonPortable} { + list [catch {file readlink _bogus_} msg] [string tolower $msg] \ + [string tolower $errorCode] +} {1 {couldn't readlink "_bogus_": no such file or directory} {posix enoent {no such file or directory}}} +test cmdAH-22.4 {Tcl_FileObjCmd: readlink errors} {macOnly nonPortable} { + list [catch {file readlink _bogus_} msg] [string tolower $msg] \ + [string tolower $errorCode] +} {1 {couldn't readlink "_bogus_": no such file or directory} {posix enoent {no such file or directory}}} +test cmdAH-22.5 {Tcl_FileObjCmd: readlink errors} {pcOnly nonPortable} { + list [catch {file readlink _bogus_} msg] [string tolower $msg] \ + [string tolower $errorCode] +} {1 {couldn't readlink "_bogus_": invalid argument} {posix einval {invalid argument}}} + +# size + +test cmdAH-23.1 {Tcl_FileObjCmd: size} { + list [catch {file size a b} msg] $msg +} {1 {wrong # args: should be "file size name"}} +test cmdAH-23.2 {Tcl_FileObjCmd: size} { + set oldsize [file size gorp.file] + set f [open gorp.file a] + fconfigure $f -translation lf -eofchar {} + puts $f "More text" + close $f + expr {[file size gorp.file] - $oldsize} +} {10} +test cmdAH-23.3 {Tcl_FileObjCmd: size} { + string tolower [list [catch {file size _bogus_} msg] $msg \ + $errorCode] +} {1 {couldn't stat "_bogus_": no such file or directory} {posix enoent {no such file or directory}}} + +# stat + +testsetplatform $platform +makeFile "Test string" gorp.file +catch {exec chmod 765 gorp.file} + +test cmdAH-24.1 {Tcl_FileObjCmd: stat} { + list [catch {file stat _bogus_} msg] $msg $errorCode +} {1 {wrong # args: should be "file stat name varName"} NONE} +test cmdAH-24.2 {Tcl_FileObjCmd: stat} { + list [catch {file stat _bogus_ a b} msg] $msg $errorCode +} {1 {wrong # args: should be "file stat name varName"} NONE} +test cmdAH-24.3 {Tcl_FileObjCmd: stat} { + catch {unset stat} + file stat gorp.file stat + lsort [array names stat] +} {atime ctime dev gid ino mode mtime nlink size type uid} +test cmdAH-24.4 {Tcl_FileObjCmd: stat} { + catch {unset stat} + file stat gorp.file stat + list $stat(nlink) $stat(size) $stat(type) +} {1 12 file} +test cmdAH-24.5 {Tcl_FileObjCmd: stat} {unix} { + catch {unset stat} + file stat gorp.file stat + expr $stat(mode)&0777 +} {501} +test cmdAH-24.6 {Tcl_FileObjCmd: stat} { + string tolower [list [catch {file stat _bogus_ stat} msg] \ + $msg $errorCode] +} {1 {couldn't stat "_bogus_": no such file or directory} {posix enoent {no such file or directory}}} +test cmdAH-24.7 {Tcl_FileObjCmd: stat} { + catch {unset x} + set x 44 + list [catch {file stat gorp.file x} msg] $msg $errorCode +} {1 {can't set "x(dev)": variable isn't array} NONE} +catch {unset stat} + +# type + +file delete link.file + +test cmdAH-25.1 {Tcl_FileObjCmd: type} { + list [catch {file size a b} msg] $msg +} {1 {wrong # args: should be "file size name"}} +test cmdAH-25.2 {Tcl_FileObjCmd: type} { + file type dir.file +} directory +test cmdAH-25.3 {Tcl_FileObjCmd: type} { + file type gorp.file +} file +test cmdAH-25.4 {Tcl_FileObjCmd: type} {unixOnly nonPortable} { + exec ln -s a/b/c link.file + set result [file type link.file] + file delete link.file + set result +} link +test cmdAH-25.5 {Tcl_FileObjCmd: type} { + string tolower [list [catch {file type _bogus_} msg] $msg $errorCode] +} {1 {couldn't stat "_bogus_": no such file or directory} {posix enoent {no such file or directory}}} + +# Error conditions + +test cmdAH-26.1 {error conditions} { + list [catch {file gorp x} msg] $msg +} {1 {bad option "gorp": must be atime, attributes, copy, delete, dirname, executable, exists, extension, isdirectory, isfile, join, lstat, mtime, mkdir, nativename, owned, pathtype, readable, readlink, rename, rootname, size, split, stat, tail, type, volumes, or writable}} +test cmdAH-26.2 {error conditions} { + list [catch {file ex x} msg] $msg +} {1 {ambiguous option "ex": must be atime, attributes, copy, delete, dirname, executable, exists, extension, isdirectory, isfile, join, lstat, mtime, mkdir, nativename, owned, pathtype, readable, readlink, rename, rootname, size, split, stat, tail, type, volumes, or writable}} +test cmdAH-26.3 {error conditions} { + list [catch {file is x} msg] $msg +} {1 {ambiguous option "is": must be atime, attributes, copy, delete, dirname, executable, exists, extension, isdirectory, isfile, join, lstat, mtime, mkdir, nativename, owned, pathtype, readable, readlink, rename, rootname, size, split, stat, tail, type, volumes, or writable}} +test cmdAH-26.4 {error conditions} { + list [catch {file z x} msg] $msg +} {1 {bad option "z": must be atime, attributes, copy, delete, dirname, executable, exists, extension, isdirectory, isfile, join, lstat, mtime, mkdir, nativename, owned, pathtype, readable, readlink, rename, rootname, size, split, stat, tail, type, volumes, or writable}} +test cmdAH-26.5 {error conditions} { + list [catch {file read x} msg] $msg +} {1 {ambiguous option "read": must be atime, attributes, copy, delete, dirname, executable, exists, extension, isdirectory, isfile, join, lstat, mtime, mkdir, nativename, owned, pathtype, readable, readlink, rename, rootname, size, split, stat, tail, type, volumes, or writable}} +test cmdAH-26.6 {error conditions} { + list [catch {file s x} msg] $msg +} {1 {ambiguous option "s": must be atime, attributes, copy, delete, dirname, executable, exists, extension, isdirectory, isfile, join, lstat, mtime, mkdir, nativename, owned, pathtype, readable, readlink, rename, rootname, size, split, stat, tail, type, volumes, or writable}} +test cmdAH-26.7 {error conditions} { + list [catch {file t x} msg] $msg +} {1 {ambiguous option "t": must be atime, attributes, copy, delete, dirname, executable, exists, extension, isdirectory, isfile, join, lstat, mtime, mkdir, nativename, owned, pathtype, readable, readlink, rename, rootname, size, split, stat, tail, type, volumes, or writable}} +test cmdAH-26.8 {error conditions} { + list [catch {file dirname ~woohgy} msg] $msg +} {1 {user "woohgy" doesn't exist}} + +testsetplatform $platform +catch {unset platform} + +catch {exec chmod 777 dir.file} +file delete -force dir.file +file delete gorp.file +file delete link.file + +concat "" diff --git a/tests/cmdIL.test b/tests/cmdIL.test new file mode 100644 index 0000000..5b56105 --- /dev/null +++ b/tests/cmdIL.test @@ -0,0 +1,253 @@ +# This file contains a collection of tests for the procedures in the +# file tclCmdIL.c. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) cmdIL.test 1.18 97/09/18 11:42:12 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test cmdIL-1.1 {Tcl_LsortObjCmd procedure} { + list [catch {lsort} msg] $msg +} {1 {wrong # args: should be "lsort ?options? list"}} +test cmdIL-1.2 {Tcl_LsortObjCmd procedure} { + list [catch {lsort -foo {1 3 2 5}} msg] $msg +} {1 {bad option "-foo": must be -ascii, -command, -decreasing, -dictionary, -increasing, -index, -integer, or -real}} +test cmdIL-1.3 {Tcl_LsortObjCmd procedure, default options} { + lsort {d e c b a \{ d35 d300} +} {a b c d d300 d35 e \{} +test cmdIL-1.4 {Tcl_LsortObjCmd procedure, -ascii option} { + lsort -integer -ascii {d e c b a d35 d300} +} {a b c d d300 d35 e} +test cmdIL-1.5 {Tcl_LsortObjCmd procedure, -command option} { + list [catch {lsort -command {1 3 2 5}} msg] $msg +} {1 {"-command" option must be followed by comparison command}} +test cmdIL-1.6 {Tcl_LsortObjCmd procedure, -command option} { + proc cmp {a b} { + expr {[string match x* $b] - [string match x* $a]} + } + lsort -command cmp {x1 abc x2 def x3 x4} +} {x1 x2 x3 x4 abc def} +test cmdIL-1.7 {Tcl_LsortObjCmd procedure, -decreasing option} { + lsort -decreasing {d e c b a d35 d300} +} {e d35 d300 d c b a} +test cmdIL-1.8 {Tcl_LsortObjCmd procedure, -dictionary option} { + lsort -dictionary {d e c b a d35 d300} +} {a b c d d35 d300 e} +test cmdIL-1.9 {Tcl_LsortObjCmd procedure, -increasing option} { + lsort -decreasing -increasing {d e c b a d35 d300} +} {a b c d d300 d35 e} +test cmdIL-1.10 {Tcl_LsortObjCmd procedure, -index option} { + list [catch {lsort -index {1 3 2 5}} msg] $msg +} {1 {"-index" option must be followed by list index}} +test cmdIL-1.11 {Tcl_LsortObjCmd procedure, -index option} { + list [catch {lsort -index foo {1 3 2 5}} msg] $msg +} {1 {bad index "foo": must be integer or "end"}} +test cmdIL-1.12 {Tcl_LsortObjCmd procedure, -index option} { + lsort -index end -integer {{2 25} {10 20 50 100} {3 16 42} 1} +} {1 {2 25} {3 16 42} {10 20 50 100}} +test cmdIL-1.13 {Tcl_LsortObjCmd procedure, -index option} { + lsort -index 1 -integer {{1 25 100} {3 16 42} {10 20 50}} +} {{3 16 42} {10 20 50} {1 25 100}} +test cmdIL-1.14 {Tcl_LsortObjCmd procedure, -integer option} { + lsort -integer {24 6 300 18} +} {6 18 24 300} +test cmdIL-1.15 {Tcl_LsortObjCmd procedure, -integer option} { + list [catch {lsort -integer {1 3 2.4}} msg] $msg +} {1 {expected integer but got "2.4"}} +test cmdIL-1.16 {Tcl_LsortObjCmd procedure, -real option} { + lsort -real {24.2 6e3 150e-1} +} {150e-1 24.2 6e3} +test cmdIL-1.17 {Tcl_LsortObjCmd procedure, bogus list} { + list [catch {lsort "1 2 3 \{ 4"} msg] $msg +} {1 {unmatched open brace in list}} +test cmdIL-1.18 {Tcl_LsortObjCmd procedure, empty list} { + lsort {} +} {} + +# Can't think of any good tests for the MergeSort and MergeLists +# procedures, except a bunch of random lists to sort. + +test cmdIL-2.1 {MergeSort and MergeLists procedures} { + set result {} + set r 1435753299 + proc rand {} { + global r + set r [expr (16807 * $r) % (0x7fffffff)] + } + for {set i 0} {$i < 150} {incr i} { + set x {} + for {set j 0} {$j < $i} {incr j} { + lappend x [expr [rand] & 0xfff] + } + set y [lsort -integer $x] + set old -1 + foreach el $y { + if {$el < $old} { + append result "list {$x} sorted to {$y}, element $el out of order\n" + break + } + set old $el + } + } + set result +} {} + +test cmdIL-3.1 {SortCompare procedure, skip comparisons after error} { + set x 0 + proc cmp {a b} { + global x + incr x + error "error #$x" + } + list [catch {lsort -integer -command cmp {48 6 28 190 16 2 3 6 1}} msg] \ + $msg $x +} {1 {error #1} 1} +test cmdIL-3.2 {SortCompare procedure, -index option} { + list [catch {lsort -integer -index 2 "\\\{ {30 40 50}"} msg] $msg +} {1 {unmatched open brace in list}} +test cmdIL-3.3 {SortCompare procedure, -index option} { + list [catch {lsort -integer -index 2 {{20 10} {15 30 40}}} msg] $msg +} {1 {element 2 missing from sublist "20 10"}} +test cmdIL-3.4 {SortCompare procedure, -index option} { + list [catch {lsort -integer -index 2 "{a b c} \\\{"} msg] $msg +} {1 {unmatched open brace in list}} +test cmdIL-3.5 {SortCompare procedure, -index option} { + list [catch {lsort -integer -index 2 {{20 10 13} {15}}} msg] $msg +} {1 {element 2 missing from sublist "15"}} +test cmdIL-3.6 {SortCompare procedure, -index option} { + lsort -integer -index 2 {{1 15 30} {2 5 25} {3 25 20}} +} {{3 25 20} {2 5 25} {1 15 30}} +test cmdIL-3.7 {SortCompare procedure, -ascii option} { + lsort -ascii {d e c b a d35 d300 100 20} +} {100 20 a b c d d300 d35 e} +test cmdIL-3.8 {SortCompare procedure, -dictionary option} { + lsort -dictionary {d e c b a d35 d300 100 20} +} {20 100 a b c d d35 d300 e} +test cmdIL-3.9 {SortCompare procedure, -integer option} { + list [catch {lsort -integer {x 3}} msg] $msg +} {1 {expected integer but got "x"}} +test cmdIL-3.10 {SortCompare procedure, -integer option} { + list [catch {lsort -integer {3 q}} msg] $msg +} {1 {expected integer but got "q"}} +test cmdIL-3.11 {SortCompare procedure, -integer option} { + lsort -integer {35 21 0x20 30 023 100 8} +} {8 023 21 30 0x20 35 100} +test cmdIL-3.12 {SortCompare procedure, -real option} { + list [catch {lsort -real {6...4 3}} msg] $msg +} {1 {expected floating-point number but got "6...4"}} +test cmdIL-3.13 {SortCompare procedure, -real option} { + list [catch {lsort -real {3 1x7}} msg] $msg +} {1 {expected floating-point number but got "1x7"}} +test cmdIL-3.14 {SortCompare procedure, -real option} { + lsort -real {24 2.5e01 16.7 85e-1 10.004} +} {85e-1 10.004 16.7 24 2.5e01} +test cmdIL-3.15 {SortCompare procedure, -command option} { + proc cmp {a b} { + error "comparison error" + } + list [catch {lsort -command cmp {48 6}} msg] $msg $errorInfo +} {1 {comparison error} {comparison error + while executing +"error "comparison error"" + (procedure "cmp" line 2) + invoked from within +"cmp 48 6" + (-compare command) + invoked from within +"lsort -command cmp {48 6}"}} +test cmdIL-3.16 {SortCompare procedure, -command option, long command} { + proc cmp {dummy a b} { + string compare $a $b + } + lsort -command {cmp {this argument is very very long in order to make the dstring overflow its statically allocated space}} {{this first element is also long in order to help expand the dstring} {the second element, last but not least, is quite long also, in order to make absolutely sure that space is allocated dynamically for the dstring}} +} {{the second element, last but not least, is quite long also, in order to make absolutely sure that space is allocated dynamically for the dstring} {this first element is also long in order to help expand the dstring}} +test cmdIL-3.17 {SortCompare procedure, -command option, non-integer result} { + proc cmp {a b} { + return foow + } + list [catch {lsort -command cmp {48 6}} msg] $msg +} {1 {-compare command returned non-numeric result}} +test cmdIL-3.18 {SortCompare procedure, -command option} { + proc cmp {a b} { + expr $b - $a + } + lsort -command cmp {48 6 18 22 21 35 36} +} {48 36 35 22 21 18 6} +test cmdIL-3.19 {SortCompare procedure, -decreasing option} { + lsort -decreasing -integer {35 21 0x20 30 023 100 8} +} {100 35 0x20 30 21 023 8} + +test cmdIL-4.1 {DictionaryCompare procedure, numerics, leading zeros} { + lsort -dictionary {a003b a03b} +} {a03b a003b} +test cmdIL-4.2 {DictionaryCompare procedure, numerics, leading zeros} { + lsort -dictionary {a3b a03b} +} {a3b a03b} +test cmdIL-4.3 {DictionaryCompare procedure, numerics, leading zeros} { + lsort -dictionary {a3b A03b} +} {A03b a3b} +test cmdIL-4.4 {DictionaryCompare procedure, numerics, leading zeros} { + lsort -dictionary {a3b a03B} +} {a3b a03B} +test cmdIL-4.5 {DictionaryCompare procedure, numerics, leading zeros} { + lsort -dictionary {00000 000} +} {000 00000} +test cmdIL-4.6 {DictionaryCompare procedure, numerics, different lengths} { + lsort -dictionary {a321b a03210b} +} {a321b a03210b} +test cmdIL-4.7 {DictionaryCompare procedure, numerics, different lengths} { + lsort -dictionary {a03210b a321b} +} {a321b a03210b} +test cmdIL-4.8 {DictionaryCompare procedure, numerics} { + lsort -dictionary {48 6a 18b 22a 21aa 35 36} +} {6a 18b 21aa 22a 35 36 48} +test cmdIL-4.9 {DictionaryCompare procedure, numerics} { + lsort -dictionary {a123x a123b} +} {a123b a123x} +test cmdIL-4.10 {DictionaryCompare procedure, numerics} { + lsort -dictionary {a123b a123x} +} {a123b a123x} +test cmdIL-4.11 {DictionaryCompare procedure, numerics} { + lsort -dictionary {a1b aab} +} {a1b aab} +test cmdIL-4.12 {DictionaryCompare procedure, numerics} { + lsort -dictionary {a1b a!b} +} {a!b a1b} +test cmdIL-4.13 {DictionaryCompare procedure, numerics} { + lsort -dictionary {a1b2c a1b1c} +} {a1b1c a1b2c} +test cmdIL-4.14 {DictionaryCompare procedure, numerics} { + lsort -dictionary {a1b2c a1b3c} +} {a1b2c a1b3c} +test cmdIL-4.15 {DictionaryCompare procedure, long numbers} { + lsort -dictionary {a7654884321988762b a7654884321988761b} +} {a7654884321988761b a7654884321988762b} +test cmdIL-4.16 {DictionaryCompare procedure, long numbers} { + lsort -dictionary {a8765488432198876b a7654884321988761b} +} {a7654884321988761b a8765488432198876b} +test cmdIL-4.17 {DictionaryCompare procedure, case} { + lsort -dictionary {aBCd abcc} +} {abcc aBCd} +test cmdIL-4.18 {DictionaryCompare procedure, case} { + lsort -dictionary {aBCd abce} +} {aBCd abce} +test cmdIL-4.19 {DictionaryCompare procedure, case} { + lsort -dictionary {abcd ABcc} +} {ABcc abcd} +test cmdIL-4.20 {DictionaryCompare procedure, case} { + lsort -dictionary {abcd ABce} +} {abcd ABce} +test cmdIL-4.21 {DictionaryCompare procedure, case} { + lsort -dictionary {abCD ABcd} +} {ABcd abCD} +test cmdIL-4.22 {DictionaryCompare procedure, case} { + lsort -dictionary {ABcd aBCd} +} {ABcd aBCd} +test cmdIL-4.23 {DictionaryCompare procedure, case} { + lsort -dictionary {ABcd AbCd} +} {ABcd AbCd} diff --git a/tests/cmdInfo.test b/tests/cmdInfo.test new file mode 100644 index 0000000..14267ac --- /dev/null +++ b/tests/cmdInfo.test @@ -0,0 +1,98 @@ +# Commands covered: none +# +# This file contains a collection of tests for Tcl_GetCommandInfo, +# Tcl_SetCommandInfo, Tcl_CreateCommand, Tcl_DeleteCommand, and +# Tcl_NameOfCommand. Sourcing this file into Tcl runs the tests +# and generates output for errors. No output means no errors were +# found. +# +# Copyright (c) 1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) cmdInfo.test 1.10 97/06/20 14:51:12 + +if {[info commands testcmdinfo] == {}} { + puts "This application hasn't been compiled with the \"testcmdinfo\"" + puts "command, so I can't test Tcl_GetCommandInfo etc." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +test cmdinfo-1.1 {command procedure and clientData} { + testcmdinfo create x1 + testcmdinfo get x1 +} {CmdProc1 original CmdDelProc1 original :: stringProc} +test cmdinfo-1.2 {command procedure and clientData} { + testcmdinfo create x1 + x1 +} {CmdProc1 original} +test cmdinfo-1.3 {command procedure and clientData} { + testcmdinfo create x1 + testcmdinfo modify x1 + testcmdinfo get x1 +} {CmdProc2 new_command_data CmdDelProc2 new_delete_data :: stringProc} +test cmdinfo-1.4 {command procedure and clientData} { + testcmdinfo create x1 + testcmdinfo modify x1 + x1 +} {CmdProc2 new_command_data} + +test cmdinfo-2.1 {command deletion callbacks} { + testcmdinfo create x1 + testcmdinfo delete x1 +} {CmdDelProc1 original} +test cmdinfo-2.2 {command deletion callbacks} { + testcmdinfo create x1 + testcmdinfo modify x1 + testcmdinfo delete x1 +} {CmdDelProc2 new_delete_data} + +test cmdinfo-3.1 {Tcl_Get/SetCommandInfo return values} { + testcmdinfo get non_existent +} {??} +test cmdinfo-3.2 {Tcl_Get/SetCommandInfo return values} { + testcmdinfo create x1 + testcmdinfo modify x1 +} 1 +test cmdinfo-3.3 {Tcl_Get/SetCommandInfo return values} { + testcmdinfo modify non_existent +} 0 + +test cmdinfo-4.1 {Tcl_GetCommandName/Tcl_GetCommandFullName procedures} { + set x [testcmdtoken create x1] + rename x1 newName + set y [testcmdtoken name $x] + rename newName x1 + eval lappend y [testcmdtoken name $x] +} {newName ::newName x1 ::x1} + +catch {rename newTestCmd {}} +catch {rename newTestCmd2 {}} + +test cmdinfo-5.1 {Names for commands created when inside namespaces} { + # create namespace cmdInfoNs1 + namespace eval cmdInfoNs1 {} ;# creates namespace cmdInfoNs1 + # create namespace cmdInfoNs1::cmdInfoNs2 and execute a script in it + set x [namespace eval cmdInfoNs1::cmdInfoNs2 { + # the following creates a cmd in the global namespace + testcmdtoken create testCmd + }] + set y [testcmdtoken name $x] + rename ::testCmd newTestCmd + eval lappend y [testcmdtoken name $x] +} {testCmd ::testCmd newTestCmd ::newTestCmd} + +test cmdinfo-6.1 {Names for commands created when outside namespaces} { + set x [testcmdtoken create cmdInfoNs1::cmdInfoNs2::testCmd] + set y [testcmdtoken name $x] + rename cmdInfoNs1::cmdInfoNs2::testCmd newTestCmd2 + eval lappend y [testcmdtoken name $x] +} {testCmd ::cmdInfoNs1::cmdInfoNs2::testCmd newTestCmd2 ::newTestCmd2} + +catch {namespace delete cmdInfoNs1::cmdInfoNs2 cmdInfoNs1} +catch {rename x1 ""} +concat {} diff --git a/tests/compile.test b/tests/compile.test new file mode 100644 index 0000000..9e30fb3 --- /dev/null +++ b/tests/compile.test @@ -0,0 +1,128 @@ +# This file contains tests for the file tclCompile.c. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1997 by Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) compile.test 1.7 97/08/12 13:34:13 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# The following tests are very incomplete, although the rest of the +# test suite covers this file fairly well. + +catch {rename p ""} +catch {namespace delete test_ns_compile} +catch {unset x} +catch {unset y} +catch {unset a} + +test compile-1.1 {TclCompileString: look up cmds in proc ns, not current ns} { + catch {namespace delete test_ns_compile} + catch {unset x} + set x 123 + namespace eval test_ns_compile { + proc set {args} { + global x + lappend x test_ns_compile::set + } + proc p {} { + set 0 + } + } + list [test_ns_compile::p] [set x] +} {{123 test_ns_compile::set} {123 test_ns_compile::set}} +test compile-1.2 {TclCompileString, error result is reset if TclGetLong determines word isn't an integer} { + proc p {x} {info commands 3m} + list [catch {p} msg] $msg +} {1 {no value given for parameter "x" to "p"}} + +test compile-2.1 {TclCompileDollarVar: global scalar name with ::s} { + catch {unset x} + set x 123 + list $::x [expr {[lsearch -exact [info globals] x] != 0}] +} {123 1} +test compile-2.2 {TclCompileDollarVar: global scalar name with ::s} { + catch {unset y} + proc p {} { + set ::y 789 + return $::y + } + list [p] $::y [expr {[lsearch -exact [info globals] y] != 0}] +} {789 789 1} +test compile-2.3 {TclCompileDollarVar: global array name with ::s} { + catch {unset a} + set ::a(1) 2 + list $::a(1) [set ::a($::a(1)) 3] $::a(2) [expr {[lsearch -exact [info globals] a] != 0}] +} {2 3 3 1} +test compile-2.4 {TclCompileDollarVar: global scalar name with ::s} { + catch {unset a} + proc p {} { + set ::a(1) 1 + return $::a($::a(1)) + } + list [p] $::a(1) [expr {[lsearch -exact [info globals] a] != 0}] +} {1 1 1} + +test compile-3.1 {TclCompileSetCmd: global scalar names with ::s} { + catch {unset x} + catch {unset y} + set x 123 + proc p {} { + set ::y 789 + return $::y + } + list $::x [expr {[lsearch -exact [info globals] x] != 0}] \ + [p] $::y [expr {[lsearch -exact [info globals] y] != 0}] +} {123 1 789 789 1} +test compile-3.2 {TclCompileSetCmd: global array names with ::s} { + catch {unset a} + set ::a(1) 2 + proc p {} { + set ::a(1) 1 + return $::a($::a(1)) + } + list $::a(1) [p] [set ::a($::a(1)) 3] $::a(1) [expr {[lsearch -exact [info globals] a] != 0}] +} {2 1 3 3 1} +test compile-3.3 {TclCompileSetCmd: namespace var names with ::s} { + catch {namespace delete test_ns_compile} + catch {unset x} + namespace eval test_ns_compile { + variable v hello + variable arr + set ::x $::test_ns_compile::v + set ::test_ns_compile::arr(1) 123 + } + list $::x $::test_ns_compile::arr(1) +} {hello 123} + +test compile-4.1 {CollectArgInfo: binary data} { + list [catch "string length \000foo" msg] $msg +} {0 4} +test compile-4.2 {CollectArgInfo: binary data} { + list [catch "string length foo\000" msg] $msg +} {0 4} +test compile-4.3 {CollectArgInfo: handle "]" at end of command properly} { + set x ] +} {]} + +test compile-5.1 {UpdateStringOfByteCode: called for duplicate of compiled empty object} { + proc p {} { + set x {} + eval $x + append x { } + eval $x + } + p +} {} + +catch {rename p ""} +catch {namespace delete test_ns_compile} +catch {unset x} +catch {unset y} +catch {unset a} diff --git a/tests/concat.test b/tests/concat.test new file mode 100644 index 0000000..d0222e9 --- /dev/null +++ b/tests/concat.test @@ -0,0 +1,46 @@ +# Commands covered: concat +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) concat.test 1.10 96/12/20 18:53:31 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test concat-1.1 {simple concatenation} { + concat a b c d e f g +} {a b c d e f g} +test concat-1.2 {merging lists together} { + concat a {b c d} {e f g h} +} {a b c d e f g h} +test concat-1.3 {merge lists, retain sub-lists} { + concat a {b {c d}} {{e f}} g h +} {a b {c d} {e f} g h} +test concat-1.4 {special characters} { + concat a\{ {b \{c d} \{d +} "a{ b \\{c d {d" + +test concat-2.1 {error: one empty argument} { + concat {} +} {} + +test concat-3.1 {error: no arguments} { + list [catch concat msg] $msg +} {0 {}} + +test concat-4.1 {pruning off extra white space} { + concat {} {a b c} +} {a b c} +test concat-4.2 {pruning off extra white space} { + concat x y " a b c \n\t " " " " def " +} {x y a b c def} +test concat-4.3 {pruning off extra white space sets length correctly} { + llength [concat { {{a}} }] +} 1 diff --git a/tests/dcall.test b/tests/dcall.test new file mode 100644 index 0000000..c7ad1c6 --- /dev/null +++ b/tests/dcall.test @@ -0,0 +1,40 @@ +# Commands covered: none +# +# This file contains a collection of tests for Tcl_CallWhenDeleted. +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) dcall.test 1.6 96/02/16 08:55:44 + +if {[info commands testdcall] == {}} { + puts "This application hasn't been compiled with the \"testdcall\"" + puts "command, so I can't test Tcl_CallWhenDeleted." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +test dcall-1.1 {deletion callbacks} { + lsort -increasing [testdcall 1 2 3] +} {1 2 3} +test dcall-1.2 {deletion callbacks} { + testdcall +} {} +test dcall-1.3 {deletion callbacks} { + lsort -increasing [testdcall 20 21 22 -22] +} {20 21} +test dcall-1.4 {deletion callbacks} { + lsort -increasing [testdcall 20 21 22 -20] +} {21 22} +test dcall-1.5 {deletion callbacks} { + lsort -increasing [testdcall 20 21 22 -21] +} {20 22} +test dcall-1.6 {deletion callbacks} { + lsort -increasing [testdcall 20 21 22 -21 -22 -20] +} {} diff --git a/tests/defs b/tests/defs new file mode 100644 index 0000000..61f90ec --- /dev/null +++ b/tests/defs @@ -0,0 +1,447 @@ +# This file contains support code for the Tcl test suite. It is +# normally sourced by the individual files in the test suite before +# they run their tests. This improved approach to testing was designed +# and initially implemented by Mary Ann May-Pumphrey of Sun Microsystems. +# +# Copyright (c) 1990-1994 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) defs 1.60 97/08/13 18:10:19 + +if ![info exists VERBOSE] { + set VERBOSE 0 +} +if ![info exists TESTS] { + set TESTS {} +} + +# If tests are being run as root, issue a warning message and set a +# variable to prevent some tests from running at all. + +set user {} +if {$tcl_platform(platform) == "unix"} { + catch {set user [exec whoami]} + if {$user == ""} { + catch {regexp {^[^(]*\(([^)]*)\)} [exec id] dummy user} + } + if {$user == ""} {set user root} + if {$user == "root"} { + puts stdout "Warning: you're executing as root. I'll have to" + puts stdout "skip some of the tests, since they'll fail as root." + set testConfig(root) 1 + } +} + +# Some of the tests don't work on some system configurations due to +# differences in word length, file system configuration, etc. In order +# to prevent false alarms, these tests are generally only run in the +# master development directory for Tcl. The presence of a file +# "doAllTests" in this directory is used to indicate that the non-portable +# tests should be run. + +# If there is no "memory" command (because memory debugging isn't +# enabled), generate a dummy command that does nothing. + +if {[info commands memory] == ""} { + proc memory args {} +} + +# Check configuration information that will determine which tests +# to run. To do this, create an array testConfig. Each element +# has a 0 or 1 value, and the following elements are defined: +# unixOnly - 1 means this is a UNIX platform, so it's OK +# to run tests that only work under UNIX. +# macOnly - 1 means this is a Mac platform, so it's OK +# to run tests that only work on Macs. +# pcOnly - 1 means this is a PC platform, so it's OK to +# run tests that only work on PCs. +# unixOrPc - 1 means this is a UNIX or PC platform. +# macOrPc - 1 means this is a Mac or PC platform. +# macOrUnix - 1 means this is a Mac or UNIX platform. +# nonPortable - 1 means this the tests are being running in +# the master Tcl/Tk development environment; +# Some tests are inherently non-portable because +# they depend on things like word length, file system +# configuration, window manager, etc. These tests +# are only run in the main Tcl development directory +# where the configuration is well known. The presence +# of the file "doAllTests" in this directory indicates +# that it is safe to run non-portable tests. +# knownBug - The test is known to fail and the bug is not yet +# fixed. The test will be run only if the file +# "doBuggyTests" exists (intended for Tcl dev. group +# internal use only). +# tempNotPc - The inverse of pcOnly. This flag is used to +# temporarily disable a test. +# tempNotMac - The inverse of macOnly. This flag is used to +# temporarily disable a test. +# nonBlockFiles - 1 means this platform supports setting files into +# nonblocking mode. +# asyncPipeClose- 1 means this platform supports async flush and +# async close on a pipe. +# unixExecs - 1 means this machine has commands such as 'cat', +# 'echo' etc available. +# notIfCompiled - 1 means this that it is safe to run tests that +# might fail if the bytecode compiler is used. This +# element is set 1 if the file "doAllTests" exists in +# this directory. Normally, this element is 0 so that +# tests that fail with the bytecode compiler are +# skipped. As of 11/2/96 these are the history tests +# since they depend on accurate source location +# information. + +catch {unset testConfig} +if {$tcl_platform(platform) == "unix"} { + set testConfig(unixOnly) 1 + set testConfig(tempNotPc) 1 + set testConfig(tempNotMac) 1 +} else { + set testConfig(unixOnly) 0 +} +if {$tcl_platform(platform) == "macintosh"} { + set testConfig(tempNotPc) 1 + set testConfig(macOnly) 1 +} else { + set testConfig(macOnly) 0 +} +if {$tcl_platform(platform) == "windows"} { + set testConfig(tempNotMac) 1 + set testConfig(pcOnly) 1 +} else { + set testConfig(pcOnly) 0 +} +set testConfig(unixOrPc) [expr $testConfig(unixOnly) || $testConfig(pcOnly)] +set testConfig(macOrPc) [expr $testConfig(macOnly) || $testConfig(pcOnly)] +set testConfig(macOrUnix) [expr $testConfig(macOnly) || $testConfig(unixOnly)] +set testConfig(nonPortable) [expr [file exists doAllTests] || [file exists doAllTe]] +set testConfig(knownBug) [expr [file exists doBuggyTests] || [file exists doBuggyT]] +set testConfig(notIfCompiled) [file exists doAllCompilerTests] + +set testConfig(unix) $testConfig(unixOnly) +set testConfig(mac) $testConfig(macOnly) +set testConfig(pc) $testConfig(pcOnly) + +set testConfig(nt) [expr {$tcl_platform(os) == "Windows NT"}] +set testConfig(95) [expr {$tcl_platform(os) == "Windows 95"}] +set testConfig(win32s) [expr {$tcl_platform(os) == "Win32s"}] + +# The following config switches are used to mark tests that crash on +# certain platforms, so that they can be reactivated again when the +# underlying problem is fixed. + +set testConfig(pcCrash) $testConfig(macOrUnix) +set testConfig(macCrash) $testConfig(unixOrPc) +set testConfig(unixCrash) $testConfig(macOrPc) + +if {[catch {set f [open defs r]}]} { + set testConfig(nonBlockFiles) 1 +} else { + if {[expr [catch {fconfigure $f -blocking off}]] == 0} { + set testConfig(nonBlockFiles) 1 + } else { + set testConfig(nonBlockFiles) 0 + } + close $f +} + +trace variable testConfig r safeFetch + +proc safeFetch {n1 n2 op} { + global testConfig + + if {($n2 != {}) && ([info exists testConfig($n2)] == 0)} { + set testConfig($n2) 0 + } +} + +# Test for SCO Unix - cannot run async flushing tests because a potential +# problem with select is apparently interfering. (Mark Diekhans). + +if {$tcl_platform(platform) == "unix"} { + if {[catch {exec uname -X | fgrep {Release = 3.2v}}] == 0} { + set testConfig(asyncPipeClose) 0 + } else { + set testConfig(asyncPipeClose) 1 + } +} else { + set testConfig(asyncPipeClose) 1 +} + +# Test to see if execed commands such as cat, echo, rm and so forth are +# present on this machine. + +set testConfig(unixExecs) 1 +if {$tcl_platform(platform) == "macintosh"} { + set testConfig(unixExecs) 0 +} +if {($testConfig(unixExecs) == 1) && ($tcl_platform(platform) == "windows")} { + if {[catch {exec cat defs}] == 1} { + set testConfig(unixExecs) 0 + } + if {($testConfig(unixExecs) == 1) && ([catch {exec echo hello}] == 1)} { + set testConfig(unixExecs) 0 + } + if {($testConfig(unixExecs) == 1) && \ + ([catch {exec sh -c echo hello}] == 1)} { + set testConfig(unixExecs) 0 + } + if {($testConfig(unixExecs) == 1) && ([catch {exec wc defs}] == 1)} { + set testConfig(unixExecs) 0 + } + if {$testConfig(unixExecs) == 1} { + exec echo hello > removeMe + if {[catch {exec rm removeMe}] == 1} { + set testConfig(unixExecs) 0 + } + } + if {($testConfig(unixExecs) == 1) && ([catch {exec sleep 1}] == 1)} { + set testConfig(unixExecs) 0 + } + if {($testConfig(unixExecs) == 1) && \ + ([catch {exec fgrep unixExecs defs}] == 1)} { + set testConfig(unixExecs) 0 + } + if {($testConfig(unixExecs) == 1) && ([catch {exec ps}] == 1)} { + set testConfig(unixExecs) 0 + } + if {($testConfig(unixExecs) == 1) && \ + ([catch {exec echo abc > removeMe}] == 0) && \ + ([catch {exec chmod 644 removeMe}] == 1) && \ + ([catch {exec rm removeMe}] == 0)} { + set testConfig(unixExecs) 0 + } else { + catch {exec rm -f removeMe} + } + if {($testConfig(unixExecs) == 1) && \ + ([catch {exec mkdir removeMe}] == 1)} { + set testConfig(unixExecs) 0 + } else { + catch {exec rm -r removeMe} + } + if {$testConfig(unixExecs) == 0} { + puts stdout "Warning: Unix-style executables are not available, so" + puts stdout "some tests will be skipped." + } +} + +proc print_verbose {name description constraints script code answer} { + puts stdout "\n" + if {[string length $constraints]} { + puts stdout "==== $name $description\t--- ($constraints) ---" + } else { + puts stdout "==== $name $description" + } + puts stdout "==== Contents of test case:" + puts stdout "$script" + if {$code != 0} { + if {$code == 1} { + puts stdout "==== Test generated error:" + puts stdout $answer + } elseif {$code == 2} { + puts stdout "==== Test generated return exception; result was:" + puts stdout $answer + } elseif {$code == 3} { + puts stdout "==== Test generated break exception" + } elseif {$code == 4} { + puts stdout "==== Test generated continue exception" + } else { + puts stdout "==== Test generated exception $code; message was:" + puts stdout $answer + } + } else { + puts stdout "==== Result was:" + puts stdout "$answer" + } +} + +# test -- +# This procedure runs a test and prints an error message if the +# test fails. If VERBOSE has been set, it also prints a message +# even if the test succeeds. The test will be skipped if it +# doesn't match the TESTS variable, or if one of the elements +# of "constraints" turns out not to be true. +# +# Arguments: +# name - Name of test, in the form foo-1.2. +# description - Short textual description of the test, to +# help humans understand what it does. +# constraints - A list of one or more keywords, each of +# which must be the name of an element in +# the array "testConfig". If any of these +# elements is zero, the test is skipped. +# This argument may be omitted. +# script - Script to run to carry out the test. It must +# return a result that can be checked for +# correctness. +# answer - Expected result from script. + +proc test {name description script answer args} { + global VERBOSE TESTS testConfig + if {[string compare $TESTS ""] != 0} then { + set ok 0 + foreach test $TESTS { + if [string match $test $name] then { + set ok 1 + break + } + } + if !$ok then return + } + set i [llength $args] + if {$i == 0} { + set constraints {} + } elseif {$i == 1} { + # "constraints" argument exists; shuffle arguments down, then + # make sure that the constraints are satisfied. + + set constraints $script + set script $answer + set answer [lindex $args 0] + set doTest 0 + if {[string match {*[$\[]*} $constraints] != 0} { + # full expression, e.g. {$foo > [info tclversion]} + + catch {set doTest [uplevel #0 expr [list $constraints]]} msg + } elseif {[regexp {[^.a-zA-Z0-9 ]+} $constraints] != 0} { + # something like {a || b} should be turned into + # $testConfig(a) || $testConfig(b). + + regsub -all {[.a-zA-Z0-9]+} $constraints {$testConfig(&)} c + catch {set doTest [eval expr $c]} + } else { + # just simple constraints such as {unixOnly fonts}. + + set doTest 1 + foreach constraint $constraints { + if {![info exists testConfig($constraint)] + || !$testConfig($constraint)} { + set doTest 0 + break + } + } + } + if {$doTest == 0} { + if $VERBOSE then { + puts stdout "++++ $name SKIPPED: $constraints" + } + return + } + } else { + error "wrong # args: must be \"test name description ?constraints? script answer\"" + } + memory tag $name + set code [catch {uplevel $script} result] + if {$code != 0} { + print_verbose $name $description $constraints $script \ + $code $result + } elseif {[string compare $result $answer] == 0} then { + if $VERBOSE then { + if {$VERBOSE > 0} { + print_verbose $name $description $constraints $script \ + $code $result + } + if {$VERBOSE != -2} { + puts stdout "++++ $name PASSED" + } + } + } else { + print_verbose $name $description $constraints $script \ + $code $result + puts stdout "---- Result should have been:" + puts stdout "$answer" + puts stdout "---- $name FAILED" + } +} + +proc dotests {file args} { + global TESTS + set savedTests $TESTS + set TESTS $args + source $file + set TESTS $savedTests +} + +proc normalizeMsg {msg} { + regsub "\n$" [string tolower $msg] "" msg + regsub -all "\n\n" $msg "\n" msg + regsub -all "\n\}" $msg "\}" msg + return $msg +} + +proc makeFile {contents name} { + set fd [open $name w] + fconfigure $fd -translation lf + if {[string index $contents [expr [string length $contents] - 1]] == "\n"} { + puts -nonewline $fd $contents + } else { + puts $fd $contents + } + close $fd +} + +proc removeFile {name} { + file delete $name +} + +proc makeDirectory {name} { + file mkdir $name +} + +proc removeDirectory {name} { + file delete -force $name +} + +proc viewFile {name} { + global tcl_platform testConfig + if {($tcl_platform(platform) == "macintosh") || \ + ($testConfig(unixExecs) == 0)} { + set f [open $name] + set data [read -nonewline $f] + close $f + return $data + } else { + exec cat $name + } +} + +# Locate tcltest executable + +set tcltest [info nameofexecutable] + +if {$tcltest == "{}"} { + set tcltest {} + puts "Unable to find tcltest executable, multiple process tests will fail." +} + +if {$tcl_platform(os) != "Win32s"} { + # Don't even try running another copy of tcltest under win32s, or you + # get an error dialog about multiple instances. + + catch { + file delete -force tmp + set f [open tmp w] + puts $f { + exit + } + close $f + set f [open "|[list $tcltest tmp]" r] + close $f + set testConfig(stdio) 1 + } +} + +if {($tcl_platform(platform) == "windows") && ($testConfig(stdio) == 0)} { + puts "(will skip tests that redirect stdio of exec'd 32-bit applications)" +} + +catch {socket} msg +set testConfig(socket) [expr {$msg != "sockets are not available on this system"}] + +if {$testConfig(socket) == 0} { + puts "(will skip tests that use sockets)" +} + + diff --git a/tests/dstring.test b/tests/dstring.test new file mode 100644 index 0000000..93a84d4 --- /dev/null +++ b/tests/dstring.test @@ -0,0 +1,248 @@ +# Commands covered: none +# +# This file contains a collection of tests for Tcl's dynamic string +# library procedures. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) dstring.test 1.10 96/10/08 17:40:02 + +if {[info commands testdstring] == {}} { + puts "This application hasn't been compiled with the \"testdstring\"" + puts "command, so I can't test Tcl_DStringAppend et al." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +test dstring-1.1 {appending and retrieving} { + testdstring free + testdstring append "abc" -1 + list [testdstring get] [testdstring length] +} {abc 3} +test dstring-1.2 {appending and retrieving} { + testdstring free + testdstring append "abc" -1 + testdstring append " xyzzy" 3 + testdstring append " 12345" -1 + list [testdstring get] [testdstring length] +} {{abc xy 12345} 12} +test dstring-1.3 {appending and retrieving} { + testdstring free + foreach l {a b c d e f g h i j k l m n o p} { + testdstring append $l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l\n -1 + } + list [testdstring get] [testdstring length] +} {{aaaaaaaaaaaaaaaaaaaaa +bbbbbbbbbbbbbbbbbbbbb +ccccccccccccccccccccc +ddddddddddddddddddddd +eeeeeeeeeeeeeeeeeeeee +fffffffffffffffffffff +ggggggggggggggggggggg +hhhhhhhhhhhhhhhhhhhhh +iiiiiiiiiiiiiiiiiiiii +jjjjjjjjjjjjjjjjjjjjj +kkkkkkkkkkkkkkkkkkkkk +lllllllllllllllllllll +mmmmmmmmmmmmmmmmmmmmm +nnnnnnnnnnnnnnnnnnnnn +ooooooooooooooooooooo +ppppppppppppppppppppp +} 352} + +test dstring-2.1 {appending list elements} { + testdstring free + testdstring element "abc" + testdstring element "d e f" + list [testdstring get] [testdstring length] +} {{abc {d e f}} 11} +test dstring-2.2 {appending list elements} { + testdstring free + testdstring element "x" + testdstring element "\{" + testdstring element "ab\}" + testdstring get +} {x \{ ab\}} +test dstring-2.3 {appending list elements} { + testdstring free + foreach l {a b c d e f g h i j k l m n o p} { + testdstring element $l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l + } + testdstring get +} {aaaaaaaaaaaaaaaaaaaaa bbbbbbbbbbbbbbbbbbbbb ccccccccccccccccccccc ddddddddddddddddddddd eeeeeeeeeeeeeeeeeeeee fffffffffffffffffffff ggggggggggggggggggggg hhhhhhhhhhhhhhhhhhhhh iiiiiiiiiiiiiiiiiiiii jjjjjjjjjjjjjjjjjjjjj kkkkkkkkkkkkkkkkkkkkk lllllllllllllllllllll mmmmmmmmmmmmmmmmmmmmm nnnnnnnnnnnnnnnnnnnnn ooooooooooooooooooooo ppppppppppppppppppppp} +test dstring-2.4 {appending list elements} { + testdstring free + testdstring append "a\{" -1 + testdstring element abc + testdstring append " \{" -1 + testdstring element xyzzy + testdstring get +} "a{ abc {xyzzy" +test dstring-2.5 {appending list elements} { + testdstring free + testdstring append " \{" -1 + testdstring element abc + testdstring get +} " {abc" +test dstring-2.6 {appending list elements} { + testdstring free + testdstring append " " -1 + testdstring element abc + testdstring get +} { abc} +test dstring-2.7 {appending list elements} { + testdstring free + testdstring append "\\ " -1 + testdstring element abc + testdstring get +} "\\ abc" +test dstring-2.8 {appending list elements} { + testdstring free + testdstring append "x " -1 + testdstring element abc + testdstring get +} {x abc} + +test dstring-3.1 {nested sublists} { + testdstring free + testdstring start + testdstring element foo + testdstring element bar + testdstring end + testdstring element another + testdstring get +} {{foo bar} another} +test dstring-3.2 {nested sublists} { + testdstring free + testdstring start + testdstring start + testdstring element abc + testdstring element def + testdstring end + testdstring end + testdstring element ghi + testdstring get +} {{{abc def}} ghi} +test dstring-3.3 {nested sublists} { + testdstring free + testdstring start + testdstring start + testdstring start + testdstring element foo + testdstring element foo2 + testdstring end + testdstring end + testdstring element foo3 + testdstring end + testdstring element foo4 + testdstring get +} {{{{foo foo2}} foo3} foo4} +test dstring-3.4 {nested sublists} { + testdstring free + testdstring element before + testdstring start + testdstring element during + testdstring element more + testdstring end + testdstring element last + testdstring get +} {before {during more} last} +test dstring-3.5 {nested sublists} { + testdstring free + testdstring element "\{" + testdstring start + testdstring element first + testdstring element second + testdstring end + testdstring get +} {\{ {first second}} + +test dstring-4.1 {truncation} { + testdstring free + testdstring append "abcdefg" -1 + testdstring trunc 3 + list [testdstring get] [testdstring length] +} {abc 3} +test dstring-4.2 {truncation} { + testdstring free + testdstring append "xyzzy" -1 + testdstring trunc 0 + list [testdstring get] [testdstring length] +} {{} 0} + +test dstring-5.1 {copying to result} { + testdstring free + testdstring append xyz -1 + testdstring result +} xyz +test dstring-5.2 {copying to result} { + testdstring free + catch {unset a} + foreach l {a b c d e f g h i j k l m n o p} { + testdstring append $l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l\n -1 + } + set a [testdstring result] + testdstring append abc -1 + list $a [testdstring get] +} {{aaaaaaaaaaaaaaaaaaaaa +bbbbbbbbbbbbbbbbbbbbb +ccccccccccccccccccccc +ddddddddddddddddddddd +eeeeeeeeeeeeeeeeeeeee +fffffffffffffffffffff +ggggggggggggggggggggg +hhhhhhhhhhhhhhhhhhhhh +iiiiiiiiiiiiiiiiiiiii +jjjjjjjjjjjjjjjjjjjjj +kkkkkkkkkkkkkkkkkkkkk +lllllllllllllllllllll +mmmmmmmmmmmmmmmmmmmmm +nnnnnnnnnnnnnnnnnnnnn +ooooooooooooooooooooo +ppppppppppppppppppppp +} abc} + +test dstring-6.1 {Tcl_DStringGetResult} { + testdstring free + list [testdstring gresult staticsmall] [testdstring get] +} {{} short} +test dstring-6.2 {Tcl_DStringGetResult} { + testdstring free + foreach l {a b c d e f g h i j k l m n o p} { + testdstring append $l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l$l\n -1 + } + list [testdstring gresult staticsmall] [testdstring get] +} {{} short} +test dstring-6.3 {Tcl_DStringGetResult} { + set result {} + lappend result [testdstring gresult staticlarge] + testdstring append x 1 + lappend result [testdstring get] +} {{} {first0 first1 first2 first3 first4 first5 first6 first7 first8 first9 +second0 second1 second2 second3 second4 second5 second6 second7 second8 second9 +third0 third1 third2 third3 third4 third5 third6 third7 third8 third9 +fourth0 fourth1 fourth2 fourth3 fourth4 fourth5 fourth6 fourth7 fourth8 fourth9 +fifth0 fifth1 fifth2 fifth3 fifth4 fifth5 fifth6 fifth7 fifth8 fifth9 +sixth0 sixth1 sixth2 sixth3 sixth4 sixth5 sixth6 sixth7 sixth8 sixth9 +seventh0 seventh1 seventh2 seventh3 seventh4 seventh5 seventh6 seventh7 seventh8 seventh9 +x}} +test dstring-6.4 {Tcl_DStringGetResult} { + set result {} + lappend result [testdstring gresult free] + testdstring append y 1 + lappend result [testdstring get] +} {{} {This is a malloc-ed stringy}} +test dstring-6.5 {Tcl_DStringGetResult} { + set result {} + lappend result [testdstring gresult special] + testdstring append z 1 + lappend result [testdstring get] +} {{} {This is a specially-allocated stringz}} + +testdstring free diff --git a/tests/env.test b/tests/env.test new file mode 100644 index 0000000..1bfc8dd --- /dev/null +++ b/tests/env.test @@ -0,0 +1,152 @@ +# Commands covered: none (tests environment variable implementation) +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) env.test 1.14 97/10/31 17:00:03 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# +# These tests will run on any platform (and indeed crashed +# on the Mac). So put them before you test for the existance +# of exec. +# +test env-1.1 {propagation of env values to child interpreters} { + catch {interp delete child} + catch {unset env(test)} + interp create child + set env(test) garbage + set return [child eval {set env(test)}] + interp delete child + unset env(test) + set return +} {garbage} +# +# This one crashed on Solaris under Tcl8.0, so we only +# want to make sure it runs. +# +test env-1.2 {lappend to env value} { + catch {unset env(test)} + set env(test) aaaaaaaaaaaaaaaa + append env(test) bbbbbbbbbbbbbb + unset env(test) +} {} +if {[info commands exec] == ""} { + puts "exec not implemented for this machine" + return +} + +if {$tcl_platform(os) == "Win32s"} { + puts "Cannot run multiple copies of tcl at the same time under Win32s" + return +} + +set f [open printenv w] +puts $f { + proc lrem {listname name} { + upvar $listname list + set i [lsearch $list $name] + if {$i >= 0} { + set list [lreplace $list $i $i] + } + return $list + } + + set names [lsort [array names env]] + if {$tcl_platform(platform) == "windows"} { + lrem names HOME + lrem names COMSPEC + lrem names ComSpec + lrem names "" + } + foreach name {TCL_LIBRARY PATH LD_LIBRARY_PATH} { + lrem names $name + } + foreach p $names { + puts "$p=$env($p)" + } +} +close $f + +proc getenv {} { + global printenv tcltest + catch {exec $tcltest printenv} out + if {$out == "child process exited abnormally"} { + set out {} + } + return $out +} + +# Save the current environment variables at the start of the test. + +foreach name [array names env] { + set env2($name) $env($name) + unset env($name) +} + +# Added the following lines so that child tcltest can actually find its +# library if the initial tcltest is run from a non-standard place. +# ('saved' env vars) +foreach name {TCL_LIBRARY PATH LD_LIBRARY_PATH} { + if {[info exists env2($name)]} { + set env($name) $env2($name); + } +} + +test env-2.1 {adding environment variables} { + getenv +} {} + +set env(NAME1) "test string" +test env-2.2 {adding environment variables} { + getenv +} {NAME1=test string} + +set env(NAME2) "more" +test env-2.3 {adding environment variables} { + getenv +} {NAME1=test string +NAME2=more} + +set env(XYZZY) "garbage" +test env-2.4 {adding environment variables} { + getenv +} {NAME1=test string +NAME2=more +XYZZY=garbage} + +set env(NAME2) "new value" +test env-3.1 {changing environment variables} { + getenv +} {NAME1=test string +NAME2=new value +XYZZY=garbage} + +unset env(NAME2) +test env-4.1 {unsetting environment variables} { + getenv +} {NAME1=test string +XYZZY=garbage} +unset env(NAME1) +test env-4.2 {unsetting environment variables} { + getenv +} {XYZZY=garbage} + +# Restore the environment variables at the end of the test. + +foreach name [array names env] { + unset env($name) +} +foreach name [array names env2] { + set env($name) $env2($name) +} + +file delete printenv diff --git a/tests/error.test b/tests/error.test new file mode 100644 index 0000000..1421e9b --- /dev/null +++ b/tests/error.test @@ -0,0 +1,175 @@ +# Commands covered: error, catch +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) error.test 1.22 97/08/12 17:02:43 + +if {[string compare test [info procs test]] == 1} then {source defs} + +proc foo {} { + global errorInfo + set a [catch {format [error glorp2]} b] + error {Human-generated} +} + +proc foo2 {} { + global errorInfo + set a [catch {format [error glorp2]} b] + error {Human-generated} $errorInfo +} + +# Catch errors occurring in commands and errors from "error" command + +test error-1.1 {simple errors from commands} { + catch {format [string compare]} b +} 1 + +test error-1.2 {simple errors from commands} { + catch {format [string compare]} b + set b +} {wrong # args: should be "string compare string1 string2"} + +test error-1.3 {simple errors from commands} { + catch {format [string compare]} b + set errorInfo +} {wrong # args: should be "string compare string1 string2" + while executing +"string compare"} + +test error-1.4 {simple errors from commands} { + catch {error glorp} b +} 1 + +test error-1.5 {simple errors from commands} { + catch {error glorp} b + set b +} glorp + +test error-1.6 {simple errors from commands} { + catch {catch a b c} b +} 1 + +test error-1.7 {simple errors from commands} { + catch {catch a b c} b + set b +} {wrong # args: should be "catch command ?varName?"} + +test error-1.8 {simple errors from commands} {nonPortable} { + # This test is non-portable: it generates a memory fault on + # machines like DEC Alphas (infinite recursion overflows + # stack?) + + proc p {} { + uplevel 1 catch p error + } + p +} 0 + +# Check errors nested in procedures. Also check the optional argument +# to "error" to generate a new error trace. + +test error-2.1 {errors in nested procedures} { + catch foo b +} 1 + +test error-2.2 {errors in nested procedures} { + catch foo b + set b +} {Human-generated} + +test error-2.3 {errors in nested procedures} { + catch foo b + set errorInfo +} {Human-generated + while executing +"error {Human-generated}" + (procedure "foo" line 4) + invoked from within +"foo"} + +test error-2.4 {errors in nested procedures} { + catch foo2 b +} 1 + +test error-2.5 {errors in nested procedures} { + catch foo2 b + set b +} {Human-generated} + +test error-2.6 {errors in nested procedures} { + catch foo2 b + set errorInfo +} {glorp2 + while executing +"error glorp2" + (procedure "foo2" line 3) + invoked from within +"foo2"} + +# Error conditions related to "catch". + +test error-3.1 {errors in catch command} { + list [catch {catch} msg] $msg +} {1 {wrong # args: should be "catch command ?varName?"}} +test error-3.2 {errors in catch command} { + list [catch {catch a b c} msg] $msg +} {1 {wrong # args: should be "catch command ?varName?"}} +test error-3.3 {errors in catch command} { + catch {unset a} + set a(0) 22 + list [catch {catch {format 44} a} msg] $msg +} {1 {couldn't save command result in variable}} +catch {unset a} + +# More tests related to errorInfo and errorCode + +test error-4.1 {errorInfo and errorCode variables} { + list [catch {error msg1 msg2 msg3} msg] $msg $errorInfo $errorCode +} {1 msg1 msg2 msg3} +test error-4.2 {errorInfo and errorCode variables} { + list [catch {error msg1 {} msg3} msg] $msg $errorInfo $errorCode +} {1 msg1 {msg1 + while executing +"error msg1 {} msg3"} msg3} +test error-4.3 {errorInfo and errorCode variables} { + list [catch {error msg1 {}} msg] $msg $errorInfo $errorCode +} {1 msg1 {msg1 + while executing +"error msg1 {}"} NONE} +test error-4.4 {errorInfo and errorCode variables} { + set errorCode bogus + list [catch {error msg1} msg] $msg $errorInfo $errorCode +} {1 msg1 {msg1 + while executing +"error msg1"} NONE} +test error-4.5 {errorInfo and errorCode variables} { + set errorCode bogus + list [catch {error msg1 msg2 {}} msg] $msg $errorInfo $errorCode +} {1 msg1 msg2 {}} + +# Errors in error command itself + +test error-5.1 {errors in error command} { + list [catch {error} msg] $msg +} {1 {wrong # args: should be "error message ?errorInfo? ?errorCode?"}} +test error-5.2 {errors in error command} { + list [catch {error a b c d} msg] $msg +} {1 {wrong # args: should be "error message ?errorInfo? ?errorCode?"}} + +# Make sure that catch resets error information + +test error-6.1 {catch must reset error state} { + catch {error outer [catch {error inner inner.errorInfo inner.errorCode}]} + list $errorCode $errorInfo +} {NONE 1} + +catch {rename p ""} +return "" diff --git a/tests/eval.test b/tests/eval.test new file mode 100644 index 0000000..07f610c --- /dev/null +++ b/tests/eval.test @@ -0,0 +1,55 @@ +# Commands covered: eval +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) eval.test 1.10 97/07/02 16:40:56 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test eval-1.1 {single argument} { + eval {format 22} +} 22 +test eval-1.2 {multiple arguments} { + set a {$b} + set b xyzzy + eval format $a +} xyzzy +test eval-1.3 {single argument} { + eval concat a b c d e f g +} {a b c d e f g} + +test eval-2.1 {error: not enough arguments} {catch eval} 1 +test eval-2.2 {error: not enough arguments} { + catch eval msg + set msg +} {wrong # args: should be "eval arg ?arg ...?"} +test eval-2.3 {error in eval'ed command} { + catch {eval {error "test error"}} +} 1 +test eval-2.4 {error in eval'ed command} { + catch {eval {error "test error"}} msg + set msg +} {test error} +test eval-2.5 {error in eval'ed command: setting errorInfo} { + catch {eval { + set a 1 + error "test error" + }} msg + set errorInfo +} "test error + while executing +\"error \"test error\"\" + (\"eval\" body line 3) + invoked from within +\"eval { + set a 1 + error \"test error\" + }\"" diff --git a/tests/event.test b/tests/event.test new file mode 100644 index 0000000..027f7e0 --- /dev/null +++ b/tests/event.test @@ -0,0 +1,567 @@ +# This file contains a collection of tests for the procedures in the file +# tclEvent.c, which includes the "update", and "vwait" Tcl +# commands. Sourcing this file into Tcl runs the tests and generates +# output for errors. No output means no errors were found. +# +# Copyright (c) 1995-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# "@(#) event.test 1.35 97/08/11 11:58:38" + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {[catch {testfilehandler create 0 off off}] == 0 } { + test event-1.1 {Tcl_CreateFileHandler, reading} { + testfilehandler close + testfilehandler create 0 readable off + testfilehandler clear 0 + testfilehandler oneevent + set result "" + lappend result [testfilehandler counts 0] + testfilehandler fillpartial 0 + testfilehandler oneevent + lappend result [testfilehandler counts 0] + testfilehandler oneevent + lappend result [testfilehandler counts 0] + testfilehandler close + set result + } {{0 0} {1 0} {2 0}} + test event-1.2 {Tcl_CreateFileHandler, writing} {nonPortable} { + # This test is non-portable because on some systems (e.g. + # SunOS 4.1.3) pipes seem to be writable always. + testfilehandler close + testfilehandler create 0 off writable + testfilehandler clear 0 + testfilehandler oneevent + set result "" + lappend result [testfilehandler counts 0] + testfilehandler fillpartial 0 + testfilehandler oneevent + lappend result [testfilehandler counts 0] + testfilehandler fill 0 + testfilehandler oneevent + lappend result [testfilehandler counts 0] + testfilehandler close + set result + } {{0 1} {0 2} {0 2}} + test event-1.3 {Tcl_DeleteFileHandler} {nonPortable} { + testfilehandler close + testfilehandler create 2 disabled disabled + testfilehandler create 1 readable writable + testfilehandler create 0 disabled disabled + testfilehandler fillpartial 1 + set result "" + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler create 1 off off + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler close + set result + } {{0 1} {1 1} {1 2} {0 0}} + + test event-2.1 {Tcl_DeleteFileHandler} {nonPortable} { + testfilehandler close + testfilehandler create 2 disabled disabled + testfilehandler create 1 readable writable + testfilehandler fillpartial 1 + set result "" + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler create 1 off off + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler close + set result + } {{0 1} {1 1} {1 2} {0 0}} + test event-2.2 {Tcl_DeleteFileHandler, fd reused & events still pending} {nonPortable} { + testfilehandler close + testfilehandler create 0 readable writable + testfilehandler fillpartial 0 + set result "" + testfilehandler oneevent + lappend result [testfilehandler counts 0] + testfilehandler close + testfilehandler create 0 readable writable + testfilehandler oneevent + lappend result [testfilehandler counts 0] + testfilehandler close + set result + } {{0 1} {0 0}} + + test event-3.1 {FileHandlerCheckProc, TCL_FILE_EVENTS off } { + testfilehandler close + testfilehandler create 1 readable writable + testfilehandler fillpartial 1 + testfilehandler windowevent + set result [testfilehandler counts 1] + testfilehandler close + set result + } {0 0} + + test event-4.1 {FileHandlerEventProc, race between event and disabling} {nonPortable} { + update + testfilehandler close + testfilehandler create 2 disabled disabled + testfilehandler create 1 readable writable + testfilehandler fillpartial 1 + set result "" + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler create 1 disabled disabled + testfilehandler oneevent + lappend result [testfilehandler counts 1] + testfilehandler close + set result + } {{0 1} {1 1} {1 2} {0 0}} + test event-4.2 {FileHandlerEventProc, TCL_FILE_EVENTS off} {nonPortable} { + update + testfilehandler close + testfilehandler create 1 readable writable + testfilehandler create 2 readable writable + testfilehandler fillpartial 1 + testfilehandler fillpartial 2 + testfilehandler oneevent + set result "" + lappend result [testfilehandler counts 1] [testfilehandler counts 2] + testfilehandler windowevent + lappend result [testfilehandler counts 1] [testfilehandler counts 2] + testfilehandler close + set result + } {{0 0} {0 1} {0 0} {0 1}} + testfilehandler close + update +} + +test event-5.1 {Tcl_BackgroundError, HandleBgErrors procedures} { + catch {rename bgerror {}} + proc bgerror msg { + global errorInfo errorCode x + lappend x [list $msg $errorInfo $errorCode] + } + after idle {error "a simple error"} + after idle {open non_existent} + after idle {set errorInfo foobar; set errorCode xyzzy} + set x {} + update idletasks + rename bgerror {} + set x +} {{{a simple error} {a simple error + while executing +"error "a simple error"" + ("after" script)} NONE} {{couldn't open "non_existent": no such file or directory} {couldn't open "non_existent": no such file or directory + while executing +"open non_existent" + ("after" script)} {POSIX ENOENT {no such file or directory}}}} +test event-5.2 {Tcl_BackgroundError, HandleBgErrors procedures} { + catch {rename bgerror {}} + proc bgerror msg { + global x + lappend x $msg + return -code break + } + after idle {error "a simple error"} + after idle {open non_existent} + set x {} + update idletasks + rename bgerror {} + set x +} {{a simple error}} + +test event-6.1 {BgErrorDeleteProc procedure} { + catch {interp delete foo} + interp create foo + foo eval { + proc bgerror args { + global errorInfo + set f [open err.out r+] + seek $f 0 end + puts $f "$args $errorInfo" + close $f + } + after 100 {error "first error"} + after 100 {error "second error"} + } + makeFile Unmodified err.out + after 100 {interp delete foo} + after 200 + update + set f [open err.out r] + set result [read $f] + close $f + removeFile err.out + set result +} {Unmodified +} + +test event-7.1 {bgerror / regular} { + set errRes {} + proc bgerror {err} { + global errRes; + set errRes $err; + } + after 0 {error err1} + vwait errRes; + set errRes; +} err1 + +test event-7.2 {bgerror / accumulation} { + set errRes {} + proc bgerror {err} { + global errRes; + lappend errRes $err; + } + after 0 {error err1} + after 0 {error err2} + after 0 {error err3} + update + set errRes; +} {err1 err2 err3} + +test event-7.3 {bgerror / accumulation / break} { + set errRes {} + proc bgerror {err} { + global errRes; + lappend errRes $err; + return -code break "skip!"; + } + after 0 {error err1} + after 0 {error err2} + after 0 {error err3} + update + set errRes; +} err1 + +test event-7.4 {tkerror is nothing special anymore to tcl} { + set errRes {} + # we don't just rename bgerror to empty because it could then + # be autoloaded... + proc bgerror {err} { + global errRes; + lappend errRes "bg:$err"; + } + proc tkerror {err} { + global errRes; + lappend errRes "tk:$err"; + } + after 0 {error err1} + update + rename tkerror {} + set errRes +} bg:err1 + +# someday : add a test checking that +# when there is no bgerror, an error msg goes to stderr +# ideally one would use sub interp and transfer a fake stderr +# to it, unfortunatly the current interp tcl API does not allow +# that. the other option would be to use fork a test but it +# then becomes more a file/exec test than a bgerror test. + +# end of bgerror tests +catch {rename bgerror {}} + + +if {[info commands testexithandler] != ""} { + test event-8.1 {Tcl_CreateExitHandler procedure} {stdio} { + set child [open |[list [info nameofexecutable]] r+] + puts $child "testexithandler create 41; testexithandler create 4" + puts $child "testexithandler create 6; exit" + flush $child + set result [read $child] + close $child + set result + } {even 6 +even 4 +odd 41 +} + + test event-9.1 {Tcl_DeleteExitHandler procedure} {stdio} { + set child [open |[list [info nameofexecutable]] r+] + puts $child "testexithandler create 41; testexithandler create 4" + puts $child "testexithandler create 6; testexithandler delete 41" + puts $child "testexithandler create 16; exit" + flush $child + set result [read $child] + close $child + set result + } {even 16 +even 6 +even 4 +} + test event-9.2 {Tcl_DeleteExitHandler procedure} {stdio} { + set child [open |[list [info nameofexecutable]] r+] + puts $child "testexithandler create 41; testexithandler create 4" + puts $child "testexithandler create 6; testexithandler delete 4" + puts $child "testexithandler create 16; exit" + flush $child + set result [read $child] + close $child + set result + } {even 16 +even 6 +odd 41 +} + test event-9.3 {Tcl_DeleteExitHandler procedure} {stdio} { + set child [open |[list [info nameofexecutable]] r+] + puts $child "testexithandler create 41; testexithandler create 4" + puts $child "testexithandler create 6; testexithandler delete 6" + puts $child "testexithandler create 16; exit" + flush $child + set result [read $child] + close $child + set result + } {even 16 +even 4 +odd 41 +} + test event-9.4 {Tcl_DeleteExitHandler procedure} {stdio} { + set child [open |[list [info nameofexecutable]] r+] + puts $child "testexithandler create 41; testexithandler delete 41" + puts $child "testexithandler create 16; exit" + flush $child + set result [read $child] + close $child + set result + } {even 16 +} +} + +test event-10.1 {Tcl_Exit procedure} {stdio} { + set child [open |[list [info nameofexecutable]] r+] + puts $child "exit 3" + list [catch {close $child} msg] $msg [lindex $errorCode 0] \ + [lindex $errorCode 2] +} {1 {child process exited abnormally} CHILDSTATUS 3} + +test event-11.1 {Tcl_VwaitCmd procedure} { + list [catch {vwait} msg] $msg +} {1 {wrong # args: should be "vwait name"}} +test event-11.2 {Tcl_VwaitCmd procedure} { + list [catch {vwait a b} msg] $msg +} {1 {wrong # args: should be "vwait name"}} +test event-11.3 {Tcl_VwaitCmd procedure} { + catch {unset x} + set x 1 + list [catch {vwait x(1)} msg] $msg +} {1 {can't trace "x(1)": variable isn't array}} +test event-11.4 {Tcl_VwaitCmd procedure} { + foreach i [after info] { + after cancel $i + } + after 10; update; # On Mac make sure update won't take long + after 100 {set x x-done} + after 200 {set y y-done} + after 300 {set z z-done} + after idle {set q q-done} + set x before + set y before + set z before + set q before + list [vwait y] $x $y $z $q +} {{} x-done y-done before q-done} + +foreach i [after info] { + after cancel $i +} + +test event-11.5 {Tcl_VwaitCmd procedure: round robin scheduling, 2 sources} {socket} { + set f1 [open test1 w] + proc accept {s args} { + puts $s foobar + close $s + } + set s1 [socket -server accept 5000] + set s2 [socket 127.0.0.1 5000] + close $s1 + set x 0 + set y 0 + set z 0 + fileevent $s2 readable { incr z } + vwait z + fileevent $f1 writable { incr x; if { $y == 3 } { set z done } } + fileevent $s2 readable { incr y; if { $x == 3 } { set z done } } + vwait z + close $f1 + close $s2 + file delete test1 test2 + list $x $y $z +} {3 3 done} +test event-11.6 {Tcl_VwaitCmd procedure: round robin scheduling, same source} { + file delete test1 test2 + set f1 [open test1 w] + set f2 [open test2 w] + set x 0 + set y 0 + set z 0 + update + fileevent $f1 writable { incr x; if { $y == 3 } { set z done } } + fileevent $f2 writable { incr y; if { $x == 3 } { set z done } } + vwait z + close $f1 + close $f2 + file delete test1 test2 + list $x $y $z +} {3 3 done} + + +test event-12.1 {Tcl_UpdateCmd procedure} { + list [catch {update a b} msg] $msg +} {1 {wrong # args: should be "update ?idletasks?"}} +test event-12.2 {Tcl_UpdateCmd procedure} { + list [catch {update bogus} msg] $msg +} {1 {bad option "bogus": must be idletasks}} +test event-12.3 {Tcl_UpdateCmd procedure} { + foreach i [after info] { + after cancel $i + } + after 500 {set x after} + after idle {set y after} + after idle {set z "after, y = $y"} + set x before + set y before + set z before + update idletasks + list $x $y $z +} {before after {after, y = after}} +test event-12.4 {Tcl_UpdateCmd procedure} { + foreach i [after info] { + after cancel $i + } + after 10; update; # On Mac make sure update won't take long + after 200 {set x x-done} + after 600 {set y y-done} + after idle {set z z-done} + set x before + set y before + set z before + after 300 + update + list $x $y $z +} {x-done before z-done} + +if {[info commands testfilehandler] != ""} { + test event-13.1 {Tcl_WaitForFile procedure, readable} unixOnly { + foreach i [after info] { + after cancel $i + } + after 100 set x timeout + testfilehandler close + testfilehandler create 1 off off + set x "no timeout" + set result [testfilehandler wait 1 readable 0] + update + testfilehandler close + list $result $x + } {{} {no timeout}} + test event-13.2 {Tcl_WaitForFile procedure, readable} unixOnly { + foreach i [after info] { + after cancel $i + } + after 100 set x timeout + testfilehandler close + testfilehandler create 1 off off + set x "no timeout" + set result [testfilehandler wait 1 readable 100] + update + testfilehandler close + list $result $x + } {{} timeout} + test event-13.3 {Tcl_WaitForFile procedure, readable} unixOnly { + foreach i [after info] { + after cancel $i + } + after 100 set x timeout + testfilehandler close + testfilehandler create 1 off off + testfilehandler fillpartial 1 + set x "no timeout" + set result [testfilehandler wait 1 readable 100] + update + testfilehandler close + list $result $x + } {readable {no timeout}} + test event-13.4 {Tcl_WaitForFile procedure, writable} {unixOnly nonPortable} { + foreach i [after info] { + after cancel $i + } + after 100 set x timeout + testfilehandler close + testfilehandler create 1 off off + testfilehandler fill 1 + set x "no timeout" + set result [testfilehandler wait 1 writable 0] + update + testfilehandler close + list $result $x + } {{} {no timeout}} + test event-13.5 {Tcl_WaitForFile procedure, writable} {unixOnly nonPortable} { + foreach i [after info] { + after cancel $i + } + after 100 set x timeout + testfilehandler close + testfilehandler create 1 off off + testfilehandler fill 1 + set x "no timeout" + set result [testfilehandler wait 1 writable 100] + update + testfilehandler close + list $result $x + } {{} timeout} + test event-13.6 {Tcl_WaitForFile procedure, writable} unixOnly { + foreach i [after info] { + after cancel $i + } + after 100 set x timeout + testfilehandler close + testfilehandler create 1 off off + set x "no timeout" + set result [testfilehandler wait 1 writable 100] + update + testfilehandler close + list $result $x + } {writable {no timeout}} + test event-13.7 {Tcl_WaitForFile procedure, don't call other event handlers} unixOnly { + foreach i [after info] { + after cancel $i + } + after 100 lappend x timeout + after idle lappend x idle + testfilehandler close + testfilehandler create 1 off off + set x "" + set result [list [testfilehandler wait 1 readable 200] $x] + update + testfilehandler close + lappend result $x + } {{} {} {timeout idle}} +} + +if {[info commands testfilewait] != ""} { + test event-13.8 {Tcl_WaitForFile procedure, waiting indefinitely} unixOnly { + set f [open "|sleep 2" r] + set result "" + lappend result [testfilewait $f readable 100] + lappend result [testfilewait $f readable -1] + close $f + set result + } {{} readable} +} + +foreach i [after info] { + after cancel $i +} diff --git a/tests/exec.test b/tests/exec.test new file mode 100644 index 0000000..169885a --- /dev/null +++ b/tests/exec.test @@ -0,0 +1,557 @@ +# Commands covered: exec +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1994 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) exec.test 1.58 97/08/01 11:10:00 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# If exec is not defined just return with no error +# Some platforms like the Macintosh do not have the exec command +if {[info commands exec] == ""} { + puts "exec not implemented for this machine" + return +} +if {$testConfig(stdio) == 0} { + return +} + +set f [open echo w] +puts $f { + puts -nonewline [lindex $argv 0] + foreach str [lrange $argv 1 end] { + puts -nonewline " $str" + } + puts {} +} +close $f + +set f [open cat w] +puts $f { + if {$argv == {}} { + set argv - + } + foreach name $argv { + if {$name == "-"} { + set f stdin + } elseif {[catch {open $name r} f] != 0} { + puts stderr $f + continue + } + while {[eof $f] == 0} { + puts -nonewline [read $f] + } + if {$f != "stdin"} { + close $f + } + } +} +close $f + +set f [open wc w] +puts $f { + set data [read stdin] + set lines [regsub -all "\n" $data {} dummy] + set words [regsub -all "\[^ \t\n]+" $data {} dummy] + set chars [string length $data] + puts [format "%8.d%8.d%8.d" $lines $words $chars] +} +close $f + +set f [open sh w] +puts $f { + if {[lindex $argv 0] != "-c"} { + error "sh: unexpected arguments $argv" + } + set cmd [lindex $argv 1] + lappend cmd ";" + + set newcmd {} + + foreach arg $cmd { + if {$arg == ";"} { + eval exec >@stdout 2>@stderr [list [info nameofexecutable]] $newcmd + set newcmd {} + continue + } + if {$arg == "1>&2"} { + set arg >@stderr + } + lappend newcmd $arg + } +} +close $f + +set f [open sleep w] +puts $f { + after [expr $argv*1000] +} +close $f + +set f [open exit w] +puts $f { + exit $argv +} +close $f + +# Basic operations. + +test exec-1.1 {basic exec operation} { + exec $tcltest echo a b c +} "a b c" +test exec-1.2 {pipelining} { + exec $tcltest echo a b c d | $tcltest cat | $tcltest cat +} "a b c d" +test exec-1.3 {pipelining} { + set a [exec $tcltest echo a b c d | $tcltest cat | $tcltest wc] + list [scan $a "%d %d %d" b c d] $b $c +} {3 1 4} +set arg {12345678901234567890123456789012345678901234567890} +set arg "$arg$arg$arg$arg$arg$arg" +test exec-1.4 {long command lines} { + exec $tcltest echo $arg +} $arg +set arg {} + +# I/O redirection: input from Tcl command. + +test exec-2.1 {redirecting input from immediate source} { + exec $tcltest cat << "Sample text" +} {Sample text} +test exec-2.2 {redirecting input from immediate source} { + exec << "Sample text" $tcltest cat | $tcltest cat +} {Sample text} +test exec-2.3 {redirecting input from immediate source} { + exec $tcltest cat << "Sample text" | $tcltest cat +} {Sample text} +test exec-2.4 {redirecting input from immediate source} { + exec $tcltest cat | $tcltest cat << "Sample text" +} {Sample text} +test exec-2.5 {redirecting input from immediate source} { + exec $tcltest cat "<<Joined to arrows" +} {Joined to arrows} + +# I/O redirection: output to file. + +file delete gorp.file +test exec-3.1 {redirecting output to file} { + exec $tcltest echo "Some simple words" > gorp.file + exec $tcltest cat gorp.file +} "Some simple words" +test exec-3.2 {redirecting output to file} { + exec $tcltest echo "More simple words" | >gorp.file $tcltest cat | $tcltest cat + exec $tcltest cat gorp.file +} "More simple words" +test exec-3.3 {redirecting output to file} { + exec > gorp.file $tcltest echo "Different simple words" | $tcltest cat | $tcltest cat + exec $tcltest cat gorp.file +} "Different simple words" +test exec-3.4 {redirecting output to file} { + exec $tcltest echo "Some simple words" >gorp.file + exec $tcltest cat gorp.file +} "Some simple words" +test exec-3.5 {redirecting output to file} { + exec $tcltest echo "First line" >gorp.file + exec $tcltest echo "Second line" >> gorp.file + exec $tcltest cat gorp.file +} "First line\nSecond line" +test exec-3.6 {redirecting output to file} { + exec $tcltest echo "First line" >gorp.file + exec $tcltest echo "Second line" >>gorp.file + exec $tcltest cat gorp.file +} "First line\nSecond line" +test exec-3.7 {redirecting output to file} { + set f [open gorp.file w] + puts $f "Line 1" + flush $f + exec $tcltest echo "More text" >@ $f + exec $tcltest echo >@$f "Even more" + puts $f "Line 3" + close $f + exec $tcltest cat gorp.file +} "Line 1\nMore text\nEven more\nLine 3" + +# I/O redirection: output and stderr to file. + +file delete gorp.file +test exec-4.1 {redirecting output and stderr to file} { + exec $tcltest echo "test output" >& gorp.file + exec $tcltest cat gorp.file +} "test output" +test exec-4.2 {redirecting output and stderr to file} { + list [exec $tcltest sh -c "echo foo bar 1>&2" >&gorp.file] \ + [exec $tcltest cat gorp.file] +} {{} {foo bar}} +test exec-4.3 {redirecting output and stderr to file} { + exec $tcltest echo "first line" > gorp.file + list [exec $tcltest sh -c "echo foo bar 1>&2" >>&gorp.file] \ + [exec $tcltest cat gorp.file] +} "{} {first line\nfoo bar}" +test exec-4.4 {redirecting output and stderr to file} { + set f [open gorp.file w] + puts $f "Line 1" + flush $f + exec $tcltest echo "More text" >&@ $f + exec $tcltest echo >&@$f "Even more" + puts $f "Line 3" + close $f + exec $tcltest cat gorp.file +} "Line 1\nMore text\nEven more\nLine 3" +test exec-4.5 {redirecting output and stderr to file} { + set f [open gorp.file w] + puts $f "Line 1" + flush $f + exec >&@ $f $tcltest sh -c "echo foo bar 1>&2" + exec >&@$f $tcltest sh -c "echo xyzzy 1>&2" + puts $f "Line 3" + close $f + exec $tcltest cat gorp.file +} "Line 1\nfoo bar\nxyzzy\nLine 3" + +# I/O redirection: input from file. + +exec $tcltest echo "Just a few thoughts" > gorp.file +test exec-5.1 {redirecting input from file} { + exec $tcltest cat < gorp.file +} {Just a few thoughts} +test exec-5.2 {redirecting input from file} { + exec $tcltest cat | $tcltest cat < gorp.file +} {Just a few thoughts} +test exec-5.3 {redirecting input from file} { + exec $tcltest cat < gorp.file | $tcltest cat +} {Just a few thoughts} +test exec-5.4 {redirecting input from file} { + exec < gorp.file $tcltest cat | $tcltest cat +} {Just a few thoughts} +test exec-5.5 {redirecting input from file} { + exec $tcltest cat <gorp.file +} {Just a few thoughts} +test exec-5.6 {redirecting input from file} { + set f [open gorp.file r] + set result [exec $tcltest cat <@ $f] + close $f + set result +} {Just a few thoughts} +test exec-5.7 {redirecting input from file} { + set f [open gorp.file r] + set result [exec <@$f $tcltest cat] + close $f + set result +} {Just a few thoughts} + +# I/O redirection: standard error through a pipeline. + +test exec-6.1 {redirecting stderr through a pipeline} { + exec $tcltest sh -c "echo foo bar" |& $tcltest cat +} "foo bar" +test exec-6.2 {redirecting stderr through a pipeline} { + exec $tcltest sh -c "echo foo bar 1>&2" |& $tcltest cat +} "foo bar" +test exec-6.3 {redirecting stderr through a pipeline} { + exec $tcltest sh -c "echo foo bar 1>&2" \ + |& $tcltest sh -c "echo second msg 1>&2 ; cat" |& $tcltest cat +} "second msg\nfoo bar" + +# I/O redirection: combinations. + +catch {exec rm -f gorp.file2} +test exec-7.1 {multiple I/O redirections} { + exec << "command input" > gorp.file2 $tcltest cat < gorp.file + exec $tcltest cat gorp.file2 +} {Just a few thoughts} +test exec-7.2 {multiple I/O redirections} { + exec < gorp.file << "command input" $tcltest cat +} {command input} + +# Long input to command and output from command. + +set a "0123456789 xxxxxxxxx abcdefghi ABCDEFGHIJK\n" +set a [concat $a $a $a $a] +set a [concat $a $a $a $a] +set a [concat $a $a $a $a] +set a [concat $a $a $a $a] +test exec-8.1 {long input and output} { + exec $tcltest cat << $a +} $a + +# Commands that return errors. + +test exec-9.1 {commands returning errors} { + set x [catch {exec gorp456} msg] + list $x [string tolower $msg] [string tolower $errorCode] +} {1 {couldn't execute "gorp456": no such file or directory} {posix enoent {no such file or directory}}} +test exec-9.2 {commands returning errors} { + string tolower [list [catch {exec $tcltest echo foo | foo123} msg] $msg $errorCode] +} {1 {couldn't execute "foo123": no such file or directory} {posix enoent {no such file or directory}}} +test exec-9.3 {commands returning errors} { + list [catch {exec $tcltest sleep 1 | $tcltest exit 43 | $tcltest sleep 1} msg] $msg +} {1 {child process exited abnormally}} +test exec-9.4 {commands returning errors} { + list [catch {exec $tcltest exit 43 | $tcltest echo "foo bar"} msg] $msg +} {1 {foo bar +child process exited abnormally}} +test exec-9.5 {commands returning errors} { + list [catch {exec gorp456 | $tcltest echo a b c} msg] [string tolower $msg] +} {1 {couldn't execute "gorp456": no such file or directory}} +test exec-9.6 {commands returning errors} { + list [catch {exec $tcltest sh -c "echo error msg 1>&2"} msg] $msg +} {1 {error msg}} +test exec-9.7 {commands returning errors} { + list [catch {exec $tcltest sh -c "echo error msg 1>&2" \ + | $tcltest sh -c "echo error msg 1>&2"} msg] $msg +} {1 {error msg +error msg}} + +# Errors in executing the Tcl command, as opposed to errors in the +# processes that are invoked. + +test exec-10.1 {errors in exec invocation} { + list [catch {exec} msg] $msg +} {1 {wrong # args: should be "exec ?switches? arg ?arg ...?"}} +test exec-10.2 {errors in exec invocation} { + list [catch {exec | cat} msg] $msg +} {1 {illegal use of | or |& in command}} +test exec-10.3 {errors in exec invocation} { + list [catch {exec cat |} msg] $msg +} {1 {illegal use of | or |& in command}} +test exec-10.4 {errors in exec invocation} { + list [catch {exec cat | | cat} msg] $msg +} {1 {illegal use of | or |& in command}} +test exec-10.5 {errors in exec invocation} { + list [catch {exec cat | |& cat} msg] $msg +} {1 {illegal use of | or |& in command}} +test exec-10.6 {errors in exec invocation} { + list [catch {exec cat |&} msg] $msg +} {1 {illegal use of | or |& in command}} +test exec-10.7 {errors in exec invocation} { + list [catch {exec cat <} msg] $msg +} {1 {can't specify "<" as last word in command}} +test exec-10.8 {errors in exec invocation} { + list [catch {exec cat >} msg] $msg +} {1 {can't specify ">" as last word in command}} +test exec-10.9 {errors in exec invocation} { + list [catch {exec cat <<} msg] $msg +} {1 {can't specify "<<" as last word in command}} +test exec-10.10 {errors in exec invocation} { + list [catch {exec cat >>} msg] $msg +} {1 {can't specify ">>" as last word in command}} +test exec-10.11 {errors in exec invocation} { + list [catch {exec cat >&} msg] $msg +} {1 {can't specify ">&" as last word in command}} +test exec-10.12 {errors in exec invocation} { + list [catch {exec cat >>&} msg] $msg +} {1 {can't specify ">>&" as last word in command}} +test exec-10.13 {errors in exec invocation} { + list [catch {exec cat >@} msg] $msg +} {1 {can't specify ">@" as last word in command}} +test exec-10.14 {errors in exec invocation} { + list [catch {exec cat <@} msg] $msg +} {1 {can't specify "<@" as last word in command}} +test exec-10.15 {errors in exec invocation} { + list [catch {exec cat < a/b/c} msg] [string tolower $msg] +} {1 {couldn't read file "a/b/c": no such file or directory}} +test exec-10.16 {errors in exec invocation} { + list [catch {exec cat << foo > a/b/c} msg] [string tolower $msg] +} {1 {couldn't write file "a/b/c": no such file or directory}} +test exec-10.17 {errors in exec invocation} { + list [catch {exec cat << foo > a/b/c} msg] [string tolower $msg] +} {1 {couldn't write file "a/b/c": no such file or directory}} +set f [open gorp.file w] +test exec-10.18 {errors in exec invocation} { + list [catch {exec cat <@ $f} msg] $msg +} "1 {channel \"$f\" wasn't opened for reading}" +close $f +set f [open gorp.file r] +test exec-10.19 {errors in exec invocation} { + list [catch {exec cat >@ $f} msg] $msg +} "1 {channel \"$f\" wasn't opened for writing}" +close $f +test exec-10.20 {errors in exec invocation} { + list [catch {exec ~non_existent_user/foo/bar} msg] $msg +} {1 {user "non_existent_user" doesn't exist}} +test exec-10.21 {errors in exec invocation} { + list [catch {exec $tcltest true | ~xyzzy_bad_user/x | false} msg] $msg +} {1 {user "xyzzy_bad_user" doesn't exist}} + +# Commands in background. + +test exec-11.1 {commands in background} { + set x [lindex [time {exec $tcltest sleep 2 &}] 0] + expr $x<1000000 +} 1 +test exec-11.2 {commands in background} { + list [catch {exec $tcltest echo a &b} msg] $msg +} {0 {a &b}} +test exec-11.3 {commands in background} { + llength [exec $tcltest sleep 1 &] +} 1 +test exec-11.4 {commands in background} { + llength [exec $tcltest sleep 1 | $tcltest sleep 1 | $tcltest sleep 1 &] +} 3 +test exec-11.5 {commands in background} { + set f [open gorp.file w] + puts $f { catch { exec [info nameofexecutable] echo foo & } } + close $f + string compare "foo" [exec $tcltest gorp.file] +} 0 + +# Make sure that background commands are properly reaped when +# they eventually die. + +exec $tcltest sleep 3 +test exec-12.1 {reaping background processes} {unixOnly nonPortable} { + for {set i 0} {$i < 20} {incr i} { + exec echo foo > /dev/null & + } + exec sleep 1 + catch {exec ps | fgrep "echo foo" | fgrep -v fgrep | wc} msg + lindex $msg 0 +} 0 +test exec-12.2 {reaping background processes} {unixOnly nonPortable} { + exec sleep 2 | sleep 2 | sleep 2 & + catch {exec ps | fgrep -i "sleep" | fgrep -i -v fgrep | wc} msg + set x [lindex $msg 0] + exec sleep 3 + catch {exec ps | fgrep -i "sleep" | fgrep -i -v fgrep | wc} msg + list $x [lindex $msg 0] +} {3 0} +test exec-12.3 {reaping background processes} {unixOnly nonPortable} { + exec sleep 1000 & + exec sleep 1000 & + set x [exec ps | fgrep "sleep" | fgrep -v fgrep] + set pids {} + foreach i [split $x \n] { + lappend pids [lindex $i 0] + } + foreach i $pids { + catch {exec kill -STOP $i} + } + catch {exec ps | fgrep "sleep" | fgrep -v fgrep | wc} msg + set x [lindex $msg 0] + + foreach i $pids { + catch {exec kill -KILL $i} + } + catch {exec ps | fgrep "sleep" | fgrep -v fgrep | wc} msg + list $x [lindex $msg 0] +} {2 0} + +# Make sure "errorCode" is set correctly. + +test exec-13.1 {setting errorCode variable} { + list [catch {exec $tcltest cat < a/b/c} msg] [string tolower $errorCode] +} {1 {posix enoent {no such file or directory}}} +test exec-13.2 {setting errorCode variable} { + list [catch {exec $tcltest cat > a/b/c} msg] [string tolower $errorCode] +} {1 {posix enoent {no such file or directory}}} +test exec-13.3 {setting errorCode variable} { + set x [catch {exec _weird_cmd_} msg] + list $x [string tolower $msg] [lindex $errorCode 0] \ + [string tolower [lrange $errorCode 2 end]] +} {1 {couldn't execute "_weird_cmd_": no such file or directory} POSIX {{no such file or directory}}} + +# Switches before the first argument + +test exec-14.1 {-keepnewline switch} { + exec -keepnewline $tcltest echo foo +} "foo\n" +test exec-14.2 {-keepnewline switch} { + list [catch {exec -keepnewline} msg] $msg +} {1 {wrong # args: should be "exec ?switches? arg ?arg ...?"}} +test exec-14.3 {unknown switch} { + list [catch {exec -gorp} msg] $msg +} {1 {bad switch "-gorp": must be -keepnewline or --}} +test exec-14.4 {-- switch} { + list [catch {exec -- -gorp} msg] [string tolower $msg] +} {1 {couldn't execute "-gorp": no such file or directory}} + +# Redirecting standard error separately from standard output + +test exec-15.1 {standard error redirection} { + exec $tcltest echo "First line" > gorp.file + list [exec $tcltest sh -c "echo foo bar 1>&2" 2> gorp.file] \ + [exec $tcltest cat gorp.file] +} {{} {foo bar}} +test exec-15.2 {standard error redirection} { + list [exec $tcltest sh -c "echo foo bar 1>&2" \ + | $tcltest echo biz baz >gorp.file 2> gorp.file2] \ + [exec $tcltest cat gorp.file] \ + [exec $tcltest cat gorp.file2] +} {{} {biz baz} {foo bar}} +test exec-15.3 {standard error redirection} { + list [exec $tcltest sh -c "echo foo bar 1>&2" \ + | $tcltest echo biz baz 2>gorp.file > gorp.file2] \ + [exec $tcltest cat gorp.file] \ + [exec $tcltest cat gorp.file2] +} {{} {foo bar} {biz baz}} +test exec-15.4 {standard error redirection} { + set f [open gorp.file w] + puts $f "Line 1" + flush $f + exec $tcltest sh -c "echo foo bar 1>&2" 2>@ $f + puts $f "Line 3" + close $f + exec $tcltest cat gorp.file +} {Line 1 +foo bar +Line 3} +test exec-15.5 {standard error redirection} { + exec $tcltest echo "First line" > gorp.file + exec $tcltest sh -c "echo foo bar 1>&2" 2>> gorp.file + exec $tcltest cat gorp.file +} {First line +foo bar} +test exec-15.6 {standard error redirection} { + exec $tcltest sh -c "echo foo bar 1>&2" > gorp.file2 2> gorp.file \ + >& gorp.file 2> gorp.file2 | $tcltest echo biz baz + list [exec $tcltest cat gorp.file] [exec $tcltest cat gorp.file2] +} {{biz baz} {foo bar}} + +test exec-16.1 {flush output before exec} { + set f [open gorp.file w] + puts $f "First line" + exec $tcltest echo "Second line" >@ $f + puts $f "Third line" + close $f + exec $tcltest cat gorp.file +} {First line +Second line +Third line} +test exec-16.2 {flush output before exec} {} { + set f [open gorp.file w] + puts $f "First line" + exec $tcltest << {puts stderr {Second line}} >&@ $f > gorp.file2 + puts $f "Third line" + close $f + exec $tcltest cat gorp.file +} {First line +Second line +Third line} + +test exec-17.1 { inheriting standard I/O } { + set f [open script w] + puts $f {close stdout + set f [open gorp.file w] + catch {exec [info nameofexecutable] echo foobar &} + exec [info nameofexecutable] sleep 2 + close $f + } + close $f + catch {exec $tcltest script} result + set f [open gorp.file r] + lappend result [read $f] + close $f + set result +} {{foobar +}} + +file delete script gorp.file gorp.file2 +file delete echo cat wc sh sleep exit diff --git a/tests/execute.test b/tests/execute.test new file mode 100644 index 0000000..81fde45 --- /dev/null +++ b/tests/execute.test @@ -0,0 +1,114 @@ +# This file contains tests for the tclExecute.c source file. Tests appear +# in the same order as the C code that they test. The set of tests is +# currently incomplete since it currently includes only new tests for +# code changed for the addition of Tcl namespaces. Other execution- +# related tests appear in several other test files including +# namespace.test, basic.test, eval.test, for.test, etc. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) execute.test 1.5 97/08/12 11:16:31 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {eval namespace delete [namespace children :: test_ns_*]} +catch {rename foo ""} +catch {unset x} +catch {unset y} +catch {unset msg} + +test execute-1.1 {Tcl_GetCommandFromObj, convert to tclCmdNameType} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {unset x} + catch {unset y} + namespace eval test_ns_1 { + namespace export cmd1 + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + } + namespace eval test_ns_1::test_ns_2 { + namespace import ::test_ns_1::* + } + set x "test_ns_1::" + set y "test_ns_2::" + list [namespace which -command ${x}${y}cmd1] \ + [catch {namespace which -command ${x}${y}cmd2} msg] $msg \ + [catch {namespace which -command ${x}${y}:cmd2} msg] $msg +} {::test_ns_1::test_ns_2::cmd1 0 {} 0 {}} +test execute-1.2 {Tcl_GetCommandFromObj, check if cached tclCmdNameType is invalid} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename foo ""} + catch {unset l} + proc foo {} { + return "global foo" + } + namespace eval test_ns_1 { + proc whichFoo {} { + return [namespace which -command foo] + } + } + set l "" + lappend l [test_ns_1::whichFoo] + namespace eval test_ns_1 { + proc foo {} { + return "namespace foo" + } + } + lappend l [test_ns_1::whichFoo] + set l +} {::foo ::test_ns_1::foo} +test execute-1.3 {Tcl_GetCommandFromObj, command never found} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename foo ""} + namespace eval test_ns_1 { + proc foo {} { + return "namespace foo" + } + } + namespace eval test_ns_1 { + proc foo {} { + return "namespace foo" + } + } + list [namespace eval test_ns_1 {namespace which -command foo}] \ + [rename test_ns_1::foo ""] \ + [catch {namespace eval test_ns_1 {namespace which -command foo}} msg] $msg +} {::test_ns_1::foo {} 0 {}} + +test execute-2.1 {SetCmdNameFromAny, set cmd name to empty heap string if NULL} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {unset l} + proc {} {} {return {}} + {} + set l {} + lindex {} 0 + {} +} {} + +test execute-3.1 {UpdateStringOfCmdName: called for duplicate of empty cmdName object} { + proc {} {} {} + proc { } {} {} + proc p {} { + set x {} + $x + append x { } + $x + } + p +} {} + +catch {eval namespace delete [namespace children :: test_ns_*]} +catch {rename foo ""} +catch {rename p ""} +catch {rename {} ""} +catch {rename { } ""} +catch {unset x} +catch {unset y} +catch {unset msg} +concat {} diff --git a/tests/expr-old.test b/tests/expr-old.test new file mode 100644 index 0000000..8fb8ad9 --- /dev/null +++ b/tests/expr-old.test @@ -0,0 +1,920 @@ +# Commands covered: expr +# +# This file contains the original set of tests for Tcl's expr command. +# Since the expr command is now compiled, a new set of tests covering +# the new implementation is in the file "expr.test". Sourcing this file +# into Tcl runs the tests and generates output for errors. +# No output means no errors were found. +# +# Copyright (c) 1991-1994 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) expr-old.test 1.63 97/10/31 17:23:24 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {([catch {expr T1()} msg] == 1) && ($msg == {unknown math function "T1"})} { + set gotT1 0 + puts "This application hasn't been compiled with the \"T1\" and" + puts "\"T2\" math functions, so I'll skip some of the expr tests." +} else { + set gotT1 1 +} + +# First, test all of the integer operators individually. + +test expr-old-1.1 {integer operators} {expr -4} -4 +test expr-old-1.2 {integer operators} {expr -(1+4)} -5 +test expr-old-1.3 {integer operators} {expr ~3} -4 +test expr-old-1.4 {integer operators} {expr !2} 0 +test expr-old-1.5 {integer operators} {expr !0} 1 +test expr-old-1.6 {integer operators} {expr 4*6} 24 +test expr-old-1.7 {integer operators} {expr 36/12} 3 +test expr-old-1.8 {integer operators} {expr 27/4} 6 +test expr-old-1.9 {integer operators} {expr 27%4} 3 +test expr-old-1.10 {integer operators} {expr 2+2} 4 +test expr-old-1.11 {integer operators} {expr 2-6} -4 +test expr-old-1.12 {integer operators} {expr 1<<3} 8 +test expr-old-1.13 {integer operators} {expr 0xff>>2} 63 +test expr-old-1.14 {integer operators} {expr -1>>2} -1 +test expr-old-1.15 {integer operators} {expr 3>2} 1 +test expr-old-1.16 {integer operators} {expr 2>2} 0 +test expr-old-1.17 {integer operators} {expr 1>2} 0 +test expr-old-1.18 {integer operators} {expr 3<2} 0 +test expr-old-1.19 {integer operators} {expr 2<2} 0 +test expr-old-1.20 {integer operators} {expr 1<2} 1 +test expr-old-1.21 {integer operators} {expr 3>=2} 1 +test expr-old-1.22 {integer operators} {expr 2>=2} 1 +test expr-old-1.23 {integer operators} {expr 1>=2} 0 +test expr-old-1.24 {integer operators} {expr 3<=2} 0 +test expr-old-1.25 {integer operators} {expr 2<=2} 1 +test expr-old-1.26 {integer operators} {expr 1<=2} 1 +test expr-old-1.27 {integer operators} {expr 3==2} 0 +test expr-old-1.28 {integer operators} {expr 2==2} 1 +test expr-old-1.29 {integer operators} {expr 3!=2} 1 +test expr-old-1.30 {integer operators} {expr 2!=2} 0 +test expr-old-1.31 {integer operators} {expr 7&0x13} 3 +test expr-old-1.32 {integer operators} {expr 7^0x13} 20 +test expr-old-1.33 {integer operators} {expr 7|0x13} 23 +test expr-old-1.34 {integer operators} {expr 0&&1} 0 +test expr-old-1.35 {integer operators} {expr 0&&0} 0 +test expr-old-1.36 {integer operators} {expr 1&&3} 1 +test expr-old-1.37 {integer operators} {expr 0||1} 1 +test expr-old-1.38 {integer operators} {expr 3||0} 1 +test expr-old-1.39 {integer operators} {expr 0||0} 0 +test expr-old-1.40 {integer operators} {expr 3>2?44:66} 44 +test expr-old-1.41 {integer operators} {expr 2>3?44:66} 66 +test expr-old-1.42 {integer operators} {expr 36/5} 7 +test expr-old-1.43 {integer operators} {expr 36%5} 1 +test expr-old-1.44 {integer operators} {expr -36/5} -8 +test expr-old-1.45 {integer operators} {expr -36%5} 4 +test expr-old-1.46 {integer operators} {expr 36/-5} -8 +test expr-old-1.47 {integer operators} {expr 36%-5} -4 +test expr-old-1.48 {integer operators} {expr -36/-5} 7 +test expr-old-1.49 {integer operators} {expr -36%-5} -1 +test expr-old-1.50 {integer operators} {expr +36} 36 +test expr-old-1.51 {integer operators} {expr +--++36} 36 +test expr-old-1.52 {integer operators} {expr +36%+5} 1 +test expr-old-1.53 {integer operators} { + catch {unset x} + set x yes + list [expr {1 && $x}] [expr {$x && 1}] \ + [expr {0 || $x}] [expr {$x || 0}] +} {1 1 1 1} + +# Check the floating-point operators individually, along with +# automatic conversion to integers where needed. + +test expr-old-2.1 {floating-point operators} {expr -4.2} -4.2 +test expr-old-2.2 {floating-point operators} {expr -(1.1+4.2)} -5.3 +test expr-old-2.3 {floating-point operators} {expr +5.7} 5.7 +test expr-old-2.4 {floating-point operators} {expr +--+-62.0} -62.0 +test expr-old-2.5 {floating-point operators} {expr !2.1} 0 +test expr-old-2.6 {floating-point operators} {expr !0.0} 1 +test expr-old-2.7 {floating-point operators} {expr 4.2*6.3} 26.46 +test expr-old-2.8 {floating-point operators} {expr 36.0/12.0} 3.0 +test expr-old-2.9 {floating-point operators} {expr 27/4.0} 6.75 +test expr-old-2.10 {floating-point operators} {expr 2.3+2.1} 4.4 +test expr-old-2.11 {floating-point operators} {expr 2.3-6.5} -4.2 +test expr-old-2.12 {floating-point operators} {expr 3.1>2.1} 1 +test expr-old-2.13 {floating-point operators} {expr {2.1 > 2.1}} 0 +test expr-old-2.14 {floating-point operators} {expr 1.23>2.34e+1} 0 +test expr-old-2.15 {floating-point operators} {expr 3.45<2.34} 0 +test expr-old-2.16 {floating-point operators} {expr 0.002e3<--200e-2} 0 +test expr-old-2.17 {floating-point operators} {expr 1.1<2.1} 1 +test expr-old-2.18 {floating-point operators} {expr 3.1>=2.2} 1 +test expr-old-2.19 {floating-point operators} {expr 2.345>=2.345} 1 +test expr-old-2.20 {floating-point operators} {expr 1.1>=2.2} 0 +test expr-old-2.21 {floating-point operators} {expr 3.0<=2.0} 0 +test expr-old-2.22 {floating-point operators} {expr 2.2<=2.2} 1 +test expr-old-2.23 {floating-point operators} {expr 2.2<=2.2001} 1 +test expr-old-2.24 {floating-point operators} {expr 3.2==2.2} 0 +test expr-old-2.25 {floating-point operators} {expr 2.2==2.2} 1 +test expr-old-2.26 {floating-point operators} {expr 3.2!=2.2} 1 +test expr-old-2.27 {floating-point operators} {expr 2.2!=2.2} 0 +test expr-old-2.28 {floating-point operators} {expr 0.0&&0.0} 0 +test expr-old-2.29 {floating-point operators} {expr 0.0&&1.3} 0 +test expr-old-2.30 {floating-point operators} {expr 1.3&&0.0} 0 +test expr-old-2.31 {floating-point operators} {expr 1.3&&3.3} 1 +test expr-old-2.32 {floating-point operators} {expr 0.0||0.0} 0 +test expr-old-2.33 {floating-point operators} {expr 0.0||1.3} 1 +test expr-old-2.34 {floating-point operators} {expr 1.3||0.0} 1 +test expr-old-2.35 {floating-point operators} {expr 3.3||0.0} 1 +test expr-old-2.36 {floating-point operators} {expr 3.3>2.3?44.3:66.3} 44.3 +test expr-old-2.37 {floating-point operators} {expr 2.3>3.3?44.3:66.3} 66.3 +test expr-old-2.38 {floating-point operators} { + list [catch {expr 028.1 + 09.2} msg] $msg +} {0 37.3} + +# Operators that aren't legal on floating-point numbers + +test expr-old-3.1 {illegal floating-point operations} { + list [catch {expr ~4.0} msg] $msg +} {1 {can't use floating-point value as operand of "~"}} +test expr-old-3.2 {illegal floating-point operations} { + list [catch {expr 27%4.0} msg] $msg +} {1 {can't use floating-point value as operand of "%"}} +test expr-old-3.3 {illegal floating-point operations} { + list [catch {expr 27.0%4} msg] $msg +} {1 {can't use floating-point value as operand of "%"}} +test expr-old-3.4 {illegal floating-point operations} { + list [catch {expr 1.0<<3} msg] $msg +} {1 {can't use floating-point value as operand of "<<"}} +test expr-old-3.5 {illegal floating-point operations} { + list [catch {expr 3<<1.0} msg] $msg +} {1 {can't use floating-point value as operand of "<<"}} +test expr-old-3.6 {illegal floating-point operations} { + list [catch {expr 24.0>>3} msg] $msg +} {1 {can't use floating-point value as operand of ">>"}} +test expr-old-3.7 {illegal floating-point operations} { + list [catch {expr 24>>3.0} msg] $msg +} {1 {can't use floating-point value as operand of ">>"}} +test expr-old-3.8 {illegal floating-point operations} { + list [catch {expr 24&3.0} msg] $msg +} {1 {can't use floating-point value as operand of "&"}} +test expr-old-3.9 {illegal floating-point operations} { + list [catch {expr 24.0|3} msg] $msg +} {1 {can't use floating-point value as operand of "|"}} +test expr-old-3.10 {illegal floating-point operations} { + list [catch {expr 24.0^3} msg] $msg +} {1 {can't use floating-point value as operand of "^"}} + +# Check the string operators individually. + +test expr-old-4.1 {string operators} {expr {"abc" > "def"}} 0 +test expr-old-4.2 {string operators} {expr {"def" > "def"}} 0 +test expr-old-4.3 {string operators} {expr {"g" > "def"}} 1 +test expr-old-4.4 {string operators} {expr {"abc" < "abd"}} 1 +test expr-old-4.5 {string operators} {expr {"abd" < "abd"}} 0 +test expr-old-4.6 {string operators} {expr {"abe" < "abd"}} 0 +test expr-old-4.7 {string operators} {expr {"abc" >= "def"}} 0 +test expr-old-4.8 {string operators} {expr {"def" >= "def"}} 1 +test expr-old-4.9 {string operators} {expr {"g" >= "def"}} 1 +test expr-old-4.10 {string operators} {expr {"abc" <= "abd"}} 1 +test expr-old-4.11 {string operators} {expr {"abd" <= "abd"}} 1 +test expr-old-4.12 {string operators} {expr {"abe" <= "abd"}} 0 +test expr-old-4.13 {string operators} {expr {"abc" == "abd"}} 0 +test expr-old-4.14 {string operators} {expr {"abd" == "abd"}} 1 +test expr-old-4.15 {string operators} {expr {"abc" != "abd"}} 1 +test expr-old-4.16 {string operators} {expr {"abd" != "abd"}} 0 +test expr-old-4.17 {string operators} {expr {"0y" < "0x12"}} 0 +test expr-old-4.18 {string operators} {expr {"." < " "}} 0 + +# The following tests are non-portable because on some systems "+" +# and "-" can be parsed as numbers. + +test expr-old-4.19 {string operators} {nonPortable} {expr {"0" == "+"}} 0 +test expr-old-4.20 {string operators} {nonPortable} {expr {"0" == "-"}} 0 +test expr-old-4.21 {string operators} {expr {1?"foo":"bar"}} foo +test expr-old-4.22 {string operators} {expr {0?"foo":"bar"}} bar + +# Operators that aren't legal on string operands. + +test expr-old-5.1 {illegal string operations} { + list [catch {expr {-"a"}} msg] $msg +} {1 {can't use non-numeric string as operand of "-"}} +test expr-old-5.2 {illegal string operations} { + list [catch {expr {+"a"}} msg] $msg +} {1 {can't use non-numeric string as operand of "+"}} +test expr-old-5.3 {illegal string operations} { + list [catch {expr {~"a"}} msg] $msg +} {1 {can't use non-numeric string as operand of "~"}} +test expr-old-5.4 {illegal string operations} { + list [catch {expr {!"a"}} msg] $msg +} {1 {can't use non-numeric string as operand of "!"}} +test expr-old-5.5 {illegal string operations} { + list [catch {expr {"a"*"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "*"}} +test expr-old-5.6 {illegal string operations} { + list [catch {expr {"a"/"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "/"}} +test expr-old-5.7 {illegal string operations} { + list [catch {expr {"a"%"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "%"}} +test expr-old-5.8 {illegal string operations} { + list [catch {expr {"a"+"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "+"}} +test expr-old-5.9 {illegal string operations} { + list [catch {expr {"a"-"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "-"}} +test expr-old-5.10 {illegal string operations} { + list [catch {expr {"a"<<"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "<<"}} +test expr-old-5.11 {illegal string operations} { + list [catch {expr {"a">>"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of ">>"}} +test expr-old-5.12 {illegal string operations} { + list [catch {expr {"a"&"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "&"}} +test expr-old-5.13 {illegal string operations} { + list [catch {expr {"a"^"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "^"}} +test expr-old-5.14 {illegal string operations} { + list [catch {expr {"a"|"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "|"}} +test expr-old-5.15 {illegal string operations} { + list [catch {expr {"a"&&"b"}} msg] $msg +} {1 {expected boolean value but got "a"}} +test expr-old-5.16 {illegal string operations} { + list [catch {expr {"a"||"b"}} msg] $msg +} {1 {expected boolean value but got "a"}} +test expr-old-5.17 {illegal string operations} { + list [catch {expr {"a"?4:2}} msg] $msg +} {1 {expected boolean value but got "a"}} + +# Check precedence pairwise. + +test expr-old-6.1 {precedence checks} {expr -~3} 4 +test expr-old-6.2 {precedence checks} {expr -!3} 0 +test expr-old-6.3 {precedence checks} {expr -~0} 1 + +test expr-old-7.1 {precedence checks} {expr 2*4/6} 1 +test expr-old-7.2 {precedence checks} {expr 24/6*3} 12 +test expr-old-7.3 {precedence checks} {expr 24/6/2} 2 + +test expr-old-8.1 {precedence checks} {expr -2+4} 2 +test expr-old-8.2 {precedence checks} {expr -2-4} -6 +test expr-old-8.3 {precedence checks} {expr +2-4} -2 + +test expr-old-9.1 {precedence checks} {expr 2*3+4} 10 +test expr-old-9.2 {precedence checks} {expr 8/2+4} 8 +test expr-old-9.3 {precedence checks} {expr 8%3+4} 6 +test expr-old-9.4 {precedence checks} {expr 2*3-1} 5 +test expr-old-9.5 {precedence checks} {expr 8/2-1} 3 +test expr-old-9.6 {precedence checks} {expr 8%3-1} 1 + +test expr-old-10.1 {precedence checks} {expr 6-3-2} 1 + +test expr-old-11.1 {precedence checks} {expr 7+1>>2} 2 +test expr-old-11.2 {precedence checks} {expr 7+1<<2} 32 +test expr-old-11.3 {precedence checks} {expr 7>>3-2} 3 +test expr-old-11.4 {precedence checks} {expr 7<<3-2} 14 + +test expr-old-12.1 {precedence checks} {expr 6>>1>4} 0 +test expr-old-12.2 {precedence checks} {expr 6>>1<2} 0 +test expr-old-12.3 {precedence checks} {expr 6>>1>=3} 1 +test expr-old-12.4 {precedence checks} {expr 6>>1<=2} 0 +test expr-old-12.5 {precedence checks} {expr 6<<1>5} 1 +test expr-old-12.6 {precedence checks} {expr 6<<1<5} 0 +test expr-old-12.7 {precedence checks} {expr 5<=6<<1} 1 +test expr-old-12.8 {precedence checks} {expr 5>=6<<1} 0 + +test expr-old-13.1 {precedence checks} {expr 2<3<4} 1 +test expr-old-13.2 {precedence checks} {expr 0<4>2} 0 +test expr-old-13.3 {precedence checks} {expr 4>2<1} 0 +test expr-old-13.4 {precedence checks} {expr 4>3>2} 0 +test expr-old-13.5 {precedence checks} {expr 4>3>=2} 0 +test expr-old-13.6 {precedence checks} {expr 4>=3>2} 0 +test expr-old-13.7 {precedence checks} {expr 4>=3>=2} 0 +test expr-old-13.8 {precedence checks} {expr 0<=4>=2} 0 +test expr-old-13.9 {precedence checks} {expr 4>=2<=0} 0 +test expr-old-13.10 {precedence checks} {expr 2<=3<=4} 1 + +test expr-old-14.1 {precedence checks} {expr 1==4>3} 1 +test expr-old-14.2 {precedence checks} {expr 0!=4>3} 1 +test expr-old-14.3 {precedence checks} {expr 1==3<4} 1 +test expr-old-14.4 {precedence checks} {expr 0!=3<4} 1 +test expr-old-14.5 {precedence checks} {expr 1==4>=3} 1 +test expr-old-14.6 {precedence checks} {expr 0!=4>=3} 1 +test expr-old-14.7 {precedence checks} {expr 1==3<=4} 1 +test expr-old-14.8 {precedence checks} {expr 0!=3<=4} 1 + +test expr-old-15.1 {precedence checks} {expr 1==3==3} 0 +test expr-old-15.2 {precedence checks} {expr 3==3!=2} 1 +test expr-old-15.3 {precedence checks} {expr 2!=3==3} 0 +test expr-old-15.4 {precedence checks} {expr 2!=1!=1} 0 + +test expr-old-16.1 {precedence checks} {expr 2&3==2} 0 +test expr-old-16.2 {precedence checks} {expr 1&3!=3} 0 + +test expr-old-17.1 {precedence checks} {expr 7&3^0x10} 19 +test expr-old-17.2 {precedence checks} {expr 7^0x10&3} 7 + +test expr-old-18.1 {precedence checks} {expr 7^0x10|3} 23 +test expr-old-18.2 {precedence checks} {expr 7|0x10^3} 23 + +test expr-old-19.1 {precedence checks} {expr 7|3&&1} 1 +test expr-old-19.2 {precedence checks} {expr 1&&3|7} 1 +test expr-old-19.3 {precedence checks} {expr 0&&1||1} 1 +test expr-old-19.4 {precedence checks} {expr 1||1&&0} 1 + +test expr-old-20.1 {precedence checks} {expr 1||0?3:4} 3 +test expr-old-20.2 {precedence checks} {expr 1?0:4||1} 0 +test expr-old-20.3 {precedence checks} {expr 1?2:0?3:4} 2 +test expr-old-20.4 {precedence checks} {expr 0?2:0?3:4} 4 +test expr-old-20.5 {precedence checks} {expr 1?2?3:4:0} 3 +test expr-old-20.6 {precedence checks} {expr 0?2?3:4:0} 0 + +# Parentheses. + +test expr-old-21.1 {parenthesization} {expr (2+4)*6} 36 +test expr-old-21.2 {parenthesization} {expr (1?0:4)||1} 1 +test expr-old-21.3 {parenthesization} {expr +(3-4)} -1 + +# Embedded commands and variable names. + +set a 16 +test expr-old-22.1 {embedded variables} {expr {2*$a}} 32 +test expr-old-22.2 {embedded variables} { + set x -5 + set y 10 + expr {$x + $y} +} {5} +test expr-old-22.3 {embedded variables} { + set x " -5" + set y " +10" + expr {$x + $y} +} {5} +test expr-old-22.4 {embedded commands and variables} {expr {[set a] - 14}} 2 +test expr-old-22.5 {embedded commands and variables} { + list [catch {expr {12 - [bad_command_name]}} msg] $msg +} {1 {invalid command name "bad_command_name"}} + +# Double-quotes and things inside them. + +test expr-old-23.1 {double quotes} {expr {"abc"}} abc +test expr-old-23.2 {double quotes} { + set a 189 + expr {"$a.bc"} +} 189.bc +test expr-old-23.3 {double quotes} { + set b2 xyx + expr {"$b2$b2$b2.[set b2].[set b2]"} +} xyxxyxxyx.xyx.xyx +test expr-old-23.4 {double quotes} {expr {"11\}\}22"}} 11}}22 +test expr-old-23.5 {double quotes} {expr {"\*bc"}} {*bc} +test expr-old-23.6 {double quotes} { + catch {unset bogus__} + list [catch {expr {"$bogus__"}} msg] $msg +} {1 {can't read "bogus__": no such variable}} +test expr-old-23.7 {double quotes} { + list [catch {expr {"a[error Testing]bc"}} msg] $msg +} {1 Testing} +test expr-old-23.8 {double quotes} { + list [catch {expr {"12398712938788234-1298379" != ""}} msg] $msg +} {0 1} + +# Numbers in various bases. + +test expr-old-24.1 {numbers in different bases} {expr 0x20} 32 +test expr-old-24.2 {numbers in different bases} {expr 015} 13 + +# Conversions between various data types. + +test expr-old-25.1 {type conversions} {expr 2+2.5} 4.5 +test expr-old-25.2 {type conversions} {expr 2.5+2} 4.5 +test expr-old-25.3 {type conversions} {expr 2-2.5} -0.5 +test expr-old-25.4 {type conversions} {expr 2/2.5} 0.8 +test expr-old-25.5 {type conversions} {expr 2>2.5} 0 +test expr-old-25.6 {type conversions} {expr 2.5>2} 1 +test expr-old-25.7 {type conversions} {expr 2<2.5} 1 +test expr-old-25.8 {type conversions} {expr 2>=2.5} 0 +test expr-old-25.9 {type conversions} {expr 2<=2.5} 1 +test expr-old-25.10 {type conversions} {expr 2==2.5} 0 +test expr-old-25.11 {type conversions} {expr 2!=2.5} 1 +test expr-old-25.12 {type conversions} {expr 2>"ab"} 0 +test expr-old-25.13 {type conversions} {expr {2>" "}} 1 +test expr-old-25.14 {type conversions} {expr {"24.1a" > 24.1}} 1 +test expr-old-25.15 {type conversions} {expr {24.1 > "24.1a"}} 0 +test expr-old-25.16 {type conversions} {expr 2+2.5} 4.5 +test expr-old-25.17 {type conversions} {expr 2+2.5} 4.5 +test expr-old-25.18 {type conversions} {expr 2.0e2} 200.0 +test expr-old-25.19 {type conversions} {expr 2.0e15} 2e+15 +test expr-old-25.20 {type conversions} {expr 10.0} 10.0 + +# Various error conditions. + +test expr-old-26.1 {error conditions} { + list [catch {expr 2+"a"} msg] $msg +} {1 {can't use non-numeric string as operand of "+"}} +test expr-old-26.2 {error conditions} { + list [catch {expr 2+4*} msg] $msg +} {1 {syntax error in expression "2+4*"}} +test expr-old-26.3 {error conditions} { + list [catch {expr 2+4*(} msg] $msg +} {1 {syntax error in expression "2+4*("}} +catch {unset _non_existent_} +test expr-old-26.4 {error conditions} { + list [catch {expr 2+$_non_existent_} msg] $msg +} {1 {can't read "_non_existent_": no such variable}} +set a xx +test expr-old-26.5 {error conditions} { + list [catch {expr {2+$a}} msg] $msg +} {1 {can't use non-numeric string as operand of "+"}} +test expr-old-26.6 {error conditions} { + list [catch {expr {2+[set a]}} msg] $msg +} {1 {can't use non-numeric string as operand of "+"}} +test expr-old-26.7 {error conditions} { + list [catch {expr {2+(4}} msg] $msg +} {1 {syntax error in expression "2+(4"}} +test expr-old-26.8 {error conditions} { + list [catch {expr 2/0} msg] $msg $errorCode +} {1 {divide by zero} {ARITH DIVZERO {divide by zero}}} +test expr-old-26.9 {error conditions} { + list [catch {expr 2%0} msg] $msg $errorCode +} {1 {divide by zero} {ARITH DIVZERO {divide by zero}}} +test expr-old-26.10 {error conditions} { + list [catch {expr 2.0/0.0} msg] $msg $errorCode +} {1 {divide by zero} {ARITH DIVZERO {divide by zero}}} +test expr-old-26.11 {error conditions} { + list [catch {expr 2#} msg] $msg +} {1 {syntax error in expression "2#"}} +test expr-old-26.12 {error conditions} { + list [catch {expr a.b} msg] $msg +} {1 {syntax error in expression "a.b"}} +test expr-old-26.13 {error conditions} { + list [catch {expr {"a"/"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "/"}} +test expr-old-26.14 {error conditions} { + list [catch {expr 2:3} msg] $msg +} {1 {syntax error in expression "2:3"}} +test expr-old-26.15 {error conditions} { + list [catch {expr a@b} msg] $msg +} {1 {syntax error in expression "a@b"}} +test expr-old-26.16 {error conditions} { + list [catch {expr a[b} msg] $msg +} {1 {missing close-bracket or close-brace}} +test expr-old-26.17 {error conditions} { + list [catch {expr a`b} msg] $msg +} {1 {syntax error in expression "a`b"}} +test expr-old-26.18 {error conditions} { + list [catch {expr \"a\"\{b} msg] $msg +} {1 {missing close-brace}} +test expr-old-26.19 {error conditions} { + list [catch {expr a} msg] $msg +} {1 {syntax error in expression "a"}} +test expr-old-26.20 {error conditions} { + list [catch expr msg] $msg +} {1 {wrong # args: should be "expr arg ?arg ...?"}} + +# Cancelled evaluation. + +test expr-old-27.1 {cancelled evaluation} { + set a 1 + expr {0&&[set a 2]} + set a +} 1 +test expr-old-27.2 {cancelled evaluation} { + set a 1 + expr {1||[set a 2]} + set a +} 1 +test expr-old-27.3 {cancelled evaluation} { + set a 1 + expr {0?[set a 2]:1} + set a +} 1 +test expr-old-27.4 {cancelled evaluation} { + set a 1 + expr {1?2:[set a 2]} + set a +} 1 +catch {unset x} +test expr-old-27.5 {cancelled evaluation} { + list [catch {expr {[info exists x] && $x}} msg] $msg +} {0 0} +test expr-old-27.6 {cancelled evaluation} { + list [catch {expr {0 && [concat $x]}} msg] $msg +} {0 0} +test expr-old-27.7 {cancelled evaluation} { + set one 1 + list [catch {expr {1 || 1/$one}} msg] $msg +} {0 1} +test expr-old-27.8 {cancelled evaluation} { + list [catch {expr {1 || -"string"}} msg] $msg +} {0 1} +test expr-old-27.9 {cancelled evaluation} { + list [catch {expr {1 || ("string" * ("x" && "y"))}} msg] $msg +} {0 1} +test expr-old-27.10 {cancelled evaluation} { + set x -1.0 + list [catch {expr {($x > 0) ? round(log($x)) : 0}} msg] $msg +} {0 0} +test expr-old-27.11 {cancelled evaluation} { + list [catch {expr {0 && foo}} msg] $msg +} {1 {syntax error in expression "0 && foo"}} +test expr-old-27.12 {cancelled evaluation} { + list [catch {expr {0 ? 1 : foo}} msg] $msg +} {1 {syntax error in expression "0 ? 1 : foo"}} + +# Tcl_ExprBool as used in "if" statements + +test expr-old-28.1 {Tcl_ExprBoolean usage} { + set a 1 + if {2} {set a 2} + set a +} 2 +test expr-old-28.2 {Tcl_ExprBoolean usage} { + set a 1 + if {0} {set a 2} + set a +} 1 +test expr-old-28.3 {Tcl_ExprBoolean usage} { + set a 1 + if {1.2} {set a 2} + set a +} 2 +test expr-old-28.4 {Tcl_ExprBoolean usage} { + set a 1 + if {-1.1} {set a 2} + set a +} 2 +test expr-old-28.5 {Tcl_ExprBoolean usage} { + set a 1 + if {0.0} {set a 2} + set a +} 1 +test expr-old-28.6 {Tcl_ExprBoolean usage} { + set a 1 + if {"YES"} {set a 2} + set a +} 2 +test expr-old-28.7 {Tcl_ExprBoolean usage} { + set a 1 + if {"no"} {set a 2} + set a +} 1 +test expr-old-28.8 {Tcl_ExprBoolean usage} { + set a 1 + if {"true"} {set a 2} + set a +} 2 +test expr-old-28.9 {Tcl_ExprBoolean usage} { + set a 1 + if {"fAlse"} {set a 2} + set a +} 1 +test expr-old-28.10 {Tcl_ExprBoolean usage} { + set a 1 + if {"on"} {set a 2} + set a +} 2 +test expr-old-28.11 {Tcl_ExprBoolean usage} { + set a 1 + if {"Off"} {set a 2} + set a +} 1 +test expr-old-28.12 {Tcl_ExprBool usage} { + list [catch {if {"abc"} {}} msg] $msg +} {1 {expected boolean value but got "abc"}} +test expr-old-28.13 {Tcl_ExprBool usage} { + list [catch {if {"ogle"} {}} msg] $msg +} {1 {expected boolean value but got "ogle"}} +test expr-old-28.14 {Tcl_ExprBool usage} { + list [catch {if {"o"} {}} msg] $msg +} {1 {expected boolean value but got "o"}} + +# Operands enclosed in braces + +test expr-old-29.1 {braces} {expr {{abc}}} abc +test expr-old-29.2 {braces} {expr {{00010}}} 8 +test expr-old-29.3 {braces} {expr {{3.1200000}}} 3.12 +test expr-old-29.4 {braces} {expr {{a{b}{1 {2 3}}c}}} "a{b}{1 {2 3}}c" +test expr-old-29.5 {braces} { + list [catch {expr "\{abc"} msg] $msg +} {1 {missing close-brace}} + +# Very long values + +test expr-old-30.1 {long values} { + set a "0000 1111 2222 3333 4444" + set a "$a | $a | $a | $a | $a" + set a "$a || $a || $a || $a || $a" + expr {$a} +} {0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 || 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 || 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 || 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 || 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444 | 0000 1111 2222 3333 4444} +test expr-old-30.2 {long values} { + set a "000000000000000000000000000000" + set a "$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a${a}5" + expr $a +} 5 + +# Expressions spanning multiple arguments + +test expr-old-31.1 {multiple arguments to expr command} { + expr 4 + ( 6 *12) -3 +} 73 +test expr-old-31.2 {multiple arguments to expr command} { + list [catch {expr 2 + (3 + 4} msg] $msg +} {1 {syntax error in expression "2 + (3 + 4"}} +test expr-old-31.3 {multiple arguments to expr command} { + list [catch {expr 2 + 3 +} msg] $msg +} {1 {syntax error in expression "2 + 3 +"}} +test expr-old-31.4 {multiple arguments to expr command} { + list [catch {expr 2 + 3 )} msg] $msg +} {1 {syntax error in expression "2 + 3 )"}} + +# Math functions + +test expr-old-32.1 {math functions in expressions} { + format %.6g [expr acos(0.5)] +} {1.0472} +test expr-old-32.2 {math functions in expressions} { + format %.6g [expr asin(0.5)] +} {0.523599} +test expr-old-32.3 {math functions in expressions} { + format %.6g [expr atan(1.0)] +} {0.785398} +test expr-old-32.4 {math functions in expressions} { + format %.6g [expr atan2(2.0, 2.0)] +} {0.785398} +test expr-old-32.5 {math functions in expressions} { + format %.6g [expr ceil(1.999)] +} {2} +test expr-old-32.6 {math functions in expressions} { + format %.6g [expr cos(.1)] +} {0.995004} +test expr-old-32.7 {math functions in expressions} { + format %.6g [expr cosh(.1)] +} {1.005} +test expr-old-32.8 {math functions in expressions} { + format %.6g [expr exp(1.0)] +} {2.71828} +test expr-old-32.9 {math functions in expressions} { + format %.6g [expr floor(2.000)] +} {2} +test expr-old-32.10 {math functions in expressions} { + format %.6g [expr floor(2.001)] +} {2} +test expr-old-32.11 {math functions in expressions} { + format %.6g [expr fmod(7.3, 3.2)] +} {0.9} +test expr-old-32.12 {math functions in expressions} { + format %.6g [expr hypot(3.0, 4.0)] +} {5} +test expr-old-32.13 {math functions in expressions} { + format %.6g [expr log(2.8)] +} {1.02962} +test expr-old-32.14 {math functions in expressions} { + format %.6g [expr log10(2.8)] +} {0.447158} +test expr-old-32.15 {math functions in expressions} { + format %.6g [expr pow(2.1, 3.1)] +} {9.97424} +test expr-old-32.16 {math functions in expressions} { + format %.6g [expr sin(.1)] +} {0.0998334} +test expr-old-32.17 {math functions in expressions} { + format %.6g [expr sinh(.1)] +} {0.100167} +test expr-old-32.18 {math functions in expressions} { + format %.6g [expr sqrt(2.0)] +} {1.41421} +test expr-old-32.19 {math functions in expressions} { + format %.6g [expr tan(0.8)] +} {1.02964} +test expr-old-32.20 {math functions in expressions} { + format %.6g [expr tanh(0.8)] +} {0.664037} +test expr-old-32.21 {math functions in expressions} { + format %.6g [expr abs(-1.8)] +} {1.8} +test expr-old-32.22 {math functions in expressions} { + expr abs(10.0) +} {10.0} +test expr-old-32.23 {math functions in expressions} { + format %.6g [expr abs(-4)] +} {4} +test expr-old-32.24 {math functions in expressions} { + format %.6g [expr abs(66)] +} {66} + +# The following test is different for 32-bit versus 64-bit architectures. + +if {0x80000000 > 0} { + test expr-old-32.25 {math functions in expressions} {nonPortable} { + list [catch {expr abs(0x8000000000000000)} msg] $msg + } {1 {integer value too large to represent}} +} else { + test expr-old-32.25 {math functions in expressions} {nonPortable} { + list [catch {expr abs(0x80000000)} msg] $msg + } {1 {integer value too large to represent}} +} + +test expr-old-32.26 {math functions in expressions} { + expr double(1) +} {1.0} +test expr-old-32.27 {math functions in expressions} { + expr double(1.1) +} {1.1} +test expr-old-32.28 {math functions in expressions} { + expr int(1) +} {1} +test expr-old-32.29 {math functions in expressions} { + expr int(1.4) +} {1} +test expr-old-32.30 {math functions in expressions} { + expr int(1.6) +} {1} +test expr-old-32.31 {math functions in expressions} { + expr int(-1.4) +} {-1} +test expr-old-32.32 {math functions in expressions} { + expr int(-1.6) +} {-1} +test expr-old-32.33 {math functions in expressions} { + list [catch {expr int(1e60)} msg] $msg +} {1 {integer value too large to represent}} +test expr-old-32.34 {math functions in expressions} { + list [catch {expr int(-1e60)} msg] $msg +} {1 {integer value too large to represent}} +test expr-old-32.35 {math functions in expressions} { + expr round(1.49) +} {1} +test expr-old-32.36 {math functions in expressions} { + expr round(1.51) +} {2} +test expr-old-32.37 {math functions in expressions} { + expr round(-1.49) +} {-1} +test expr-old-32.38 {math functions in expressions} { + expr round(-1.51) +} {-2} +test expr-old-32.39 {math functions in expressions} { + list [catch {expr round(1e60)} msg] $msg +} {1 {integer value too large to represent}} +test expr-old-32.40 {math functions in expressions} { + list [catch {expr round(-1e60)} msg] $msg +} {1 {integer value too large to represent}} +test expr-old-32.41 {math functions in expressions} { + list [catch {expr pow(1.0 + 3.0 - 2, .8 * 5)} msg] $msg +} {0 16.0} +test expr-old-32.42 {math functions in expressions} { + list [catch {expr hypot(5*.8,3)} msg] $msg +} {0 5.0} +if $gotT1 { + test expr-old-32.43 {math functions in expressions} { + expr 2*T1() + } 246 + test expr-old-32.44 {math functions in expressions} { + expr T2()*3 + } 1035 +} +test expr-old-32.45 {math functions in expressions} { + expr (0 <= rand()) && (rand() < 1) +} {1} +test expr-old-32.46 {math functions in expressions} { + list [catch {expr rand(24)} msg] $msg +} {1 {syntax error in expression "rand(24)"}} +test expr-old-32.47 {math functions in expressions} { + list [catch {expr srand()} msg] $msg +} {1 {syntax error in expression "srand()"}} +test expr-old-32.48 {math functions in expressions} { + list [catch {expr srand(3.79)} msg] $msg +} {1 {can't use floating-point value as argument to srand}} +test expr-old-32.49 {math functions in expressions} { + list [catch {expr srand("")} msg] $msg +} {1 {can't use non-numeric string as argument to srand}} +test expr-old-32.50 {math functions in expressions} { + set result [expr round(srand(12345) * 1000)] + for {set i 0} {$i < 10} {incr i} { + lappend result [expr round(rand() * 1000)] + } + set result +} {97 834 948 36 12 51 766 585 914 784 333} +test expr-old-32.51 {math functions in expressions} { + list [catch {expr {srand([lindex "6ty" 0])}} msg] $msg +} {1 {can't use non-numeric string as argument to srand}} + +test expr-old-33.1 {conversions and fancy args to math functions} { + expr hypot ( 3 , 4 ) +} 5.0 +test expr-old-33.2 {conversions and fancy args to math functions} { + expr hypot ( (2.0+1.0) , 4 ) +} 5.0 +test expr-old-33.3 {conversions and fancy args to math functions} { + expr hypot ( 3 , (3.0 + 1.0) ) +} 5.0 +test expr-old-33.4 {conversions and fancy args to math functions} { + format %.6g [expr cos(acos(0.1))] +} 0.1 + +test expr-old-34.1 {errors in math functions} { + list [catch {expr func_2(1.0)} msg] $msg +} {1 {unknown math function "func_2"}} +test expr-old-34.2 {errors in math functions} { + list [catch {expr func|(1.0)} msg] $msg +} {1 {syntax error in expression "func|(1.0)"}} +test expr-old-34.3 {errors in math functions} { + list [catch {expr {hypot("a b", 2.0)}} msg] $msg +} {1 {argument to math function didn't have numeric value}} +test expr-old-34.4 {errors in math functions} { + list [catch {expr hypot(1.0 2.0)} msg] $msg +} {1 {syntax error in expression "hypot(1.0 2.0)"}} +test expr-old-34.5 {errors in math functions} { + list [catch {expr hypot(1.0, 2.0} msg] $msg +} {1 {syntax error in expression "hypot(1.0, 2.0"}} +test expr-old-34.6 {errors in math functions} { + list [catch {expr hypot(1.0 ,} msg] $msg +} {1 {syntax error in expression "hypot(1.0 ,"}} +test expr-old-34.7 {errors in math functions} { + list [catch {expr hypot(1.0)} msg] $msg +} {1 {too few arguments for math function}} +test expr-old-34.8 {errors in math functions} { + list [catch {expr hypot(1.0, 2.0, 3.0)} msg] $msg +} {1 {too many arguments for math function}} +test expr-old-34.9 {errors in math functions} { + list [catch {expr acos(-2.0)} msg] $msg $errorCode +} {1 {domain error: argument not in valid range} {ARITH DOMAIN {domain error: argument not in valid range}}} +test expr-old-34.10 {errors in math functions} {nonPortable} { + list [catch {expr pow(-3, 1000001)} msg] $msg $errorCode +} {1 {floating-point value too large to represent} {ARITH OVERFLOW {floating-point value too large to represent}}} +test expr-old-34.11 {errors in math functions} { + list [catch {expr pow(3, 1000001)} msg] $msg $errorCode +} {1 {floating-point value too large to represent} {ARITH OVERFLOW {floating-point value too large to represent}}} +test expr-old-34.12 {errors in math functions} { + list [catch {expr -14.0*exp(100000)} msg] $msg $errorCode +} {1 {floating-point value too large to represent} {ARITH OVERFLOW {floating-point value too large to represent}}} +test expr-old-34.13 {errors in math functions} { + list [catch {expr int(1.0e30)} msg] $msg $errorCode +} {1 {integer value too large to represent} {ARITH IOVERFLOW {integer value too large to represent}}} +test expr-old-34.14 {errors in math functions} { + list [catch {expr int(-1.0e30)} msg] $msg $errorCode +} {1 {integer value too large to represent} {ARITH IOVERFLOW {integer value too large to represent}}} +test expr-old-34.15 {errors in math functions} { + list [catch {expr round(1.0e30)} msg] $msg $errorCode +} {1 {integer value too large to represent} {ARITH IOVERFLOW {integer value too large to represent}}} +test expr-old-34.16 {errors in math functions} { + list [catch {expr round(-1.0e30)} msg] $msg $errorCode +} {1 {integer value too large to represent} {ARITH IOVERFLOW {integer value too large to represent}}} +if $gotT1 { + test expr-old-34.17 {errors in math functions} { + list [catch {expr T1(4)} msg] $msg + } {1 {syntax error in expression "T1(4)"}} +} + +test expr-old-36.1 {ExprLooksLikeInt procedure} { + list [catch {expr 0289} msg] $msg +} {1 {syntax error in expression "0289"}} +test expr-old-36.2 {ExprLooksLikeInt procedure} { + set x 0289 + list [catch {expr {$x+1}} msg] $msg +} {1 {can't use non-numeric string as operand of "+"}} +test expr-old-36.3 {ExprLooksLikeInt procedure} { + list [catch {expr 0289.1} msg] $msg +} {0 289.1} +test expr-old-36.4 {ExprLooksLikeInt procedure} { + set x 0289.1 + list [catch {expr {$x+1}} msg] $msg +} {0 290.1} +test expr-old-36.5 {ExprLooksLikeInt procedure} { + set x { +22} + list [catch {expr {$x+1}} msg] $msg +} {0 23} +test expr-old-36.6 {ExprLooksLikeInt procedure} { + set x { -22} + list [catch {expr {$x+1}} msg] $msg +} {0 -21} +test expr-old-36.7 {ExprLooksLikeInt procedure} {nonPortable unixOnly} { + list [catch {expr nan} msg] $msg +} {1 {domain error: argument not in valid range}} +test expr-old-36.8 {ExprLooksLikeInt procedure} { + list [catch {expr 78e1} msg] $msg +} {0 780.0} +test expr-old-36.9 {ExprLooksLikeInt procedure} { + list [catch {expr 24E1} msg] $msg +} {0 240.0} +test expr-old-36.10 {ExprLooksLikeInt procedure} {nonPortable unixOnly} { + list [catch {expr 78e} msg] $msg +} {1 {syntax error in expression "78e"}} + +test expr-old-37.1 {Check that Tcl_ExprLong doesn't modify interpreter result if no error} { + testexprlong +} {This is a result: 5} + +test expr-old-38.1 {Verify Tcl_ExprString's basic operation} { + list [testexprstring "1+4"] [testexprstring "2*3+4.2"] \ + [catch {testexprstring "1+"} msg] $msg +} {5 10.2 1 {syntax error in expression "1+"}} + + +# Special test for Pentium arithmetic bug of 1994: + +if {(4195835.0 - (4195835.0/3145727.0)*3145727.0) == 256.0} { + puts "Warning: this machine contains a defective Pentium processor" + puts "that performs arithmetic incorrectly. I recommend that you" + puts "call Intel customer service immediately at 1-800-628-8686" + puts "to request a replacement processor." +} diff --git a/tests/expr.test b/tests/expr.test new file mode 100644 index 0000000..3c4779f --- /dev/null +++ b/tests/expr.test @@ -0,0 +1,670 @@ +# Commands covered: expr +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) expr.test 1.39 97/11/03 16:04:47 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {([catch {expr T1()} msg] == 1) && ($msg == {unknown math function "T1"})} { + set gotT1 0 + puts "This application hasn't been compiled with the \"T1\" and" + puts "\"T2\" math functions, so I'll skip some of the expr tests." +} else { + set gotT1 1 +} + +# procedures used below + +proc put_hello_char {c} { + global a + append a [format %c $c] + return $c +} +proc hello_world {} { + global a + set a "" + set L1 [set l0 [set h_1 [set q 0]]] + for {put_hello_char [expr [put_hello_char [expr [set h 7]*10+2]]+29]} {$l0?[put_hello_char $l0] + :!$h_1} {put_hello_char $ll;expr {$L1==2?[set ll [expr 32+0-0+[set bar 0]]]:0}} {expr {[incr L1]==[expr 1+([string length "abc"]-[string length "abc"])] + ?[set ll [set l0 [expr 54<<1]]]:$ll==108&&$L1<3? + [incr ll [expr 1|1<<1]; set ll $ll; set ll $ll; set ll $ll; set ll $ll; set l0 [expr ([string length "abc"]-[string length "abc"])+([string length "abc"]-[string length "abc"])-([string length "abc"]-[string length "abc"])+([string length "abc"]-[string length "abc"])]; set l0; set l0 $l0; set l0; set l0]:$L1==4&&$ll==32?[set ll [expr 19+$h1+([string length "abc"]-[string length "abc"])-([string length "abc"]-[string length "abc"])+([string length "abc"]-[string length "abc"])-([string length "abc"]-[string length "abc"])+[set foo [expr ([string length "abc"]-[string length "abc"])+([string length "abc"]-[string length "abc"])+([string length "abc"]-[string length "abc"])]]]] + :[set q [expr $q-$h1+([string length "abc"]-[string length "abc"])-([string length "abc"]-[string length "abc"])]]};expr {$L1==5?[incr ll -8; set ll $ll; set ll]:$q&&$h1&&1};expr {$L1==4+2 + ?[incr ll 3]:[expr ([string length "abc"]-[string length "abc"])+1]};expr {$ll==($h<<4)+2+0&&$L1!=6?[incr ll -6]:[set h1 [expr 100+([string length "abc"]-[string length "abc"])-([string length "abc"]-[string length "abc"])]]} + expr {$L1!=1<<3?[incr q [expr ([string length "abc"]-[string length "abc"])-1]]:[set h_1 [set ll $h1]]} + } + set a +} + +proc 12days {a b c} { + global xxx + expr {1<$a?[expr {$a<3?[12days -79 -13 [string range $c [12days -87 \ + [expr 1-$b] [string range $c [12days -86 0 [string range $c 1 end]] \ + end]] end]]:1};expr {$a<$b?[12days [expr $a+1] $b $c]:3};expr {[12days \ + -94 [expr $a-27] $c]&&$a==2?$b<13?[12days 2 [expr $b+1] "%s %d %d\n"]:9 + :16}]:$a<0?$a<-72?[12days $b $a "@n'+,#'/*\{\}w+/w#cdnr/+,\{\}r/*de\}+,/*\{*+,/w\{%+,/w#q#n+,/#\{l+,/n\{n+,/+#n+,/#;#q#n+,/+k#;*+,/'r :'d*'3,\}\{w+K w'K:'+\}e#';dq#'l q#'+d'K#!/+k#;q#'r\}eKK#\}w'r\}eKK\{nl\]'/#;#q#n')\{)#\}w')\{)\{nl\]'/+#n';d\}rw' i;# )\{nl\]!/n\{n#'; r\{#w'r nc\{nl\]'/#\{l,+'K \{rw' iK\{;\[\{nl\]'/w#q#n'wk nw' iwk\{KK\{nl\]!/w\{%'l##w#' i; :\{nl\]'/*\{q#'ld;r'\}\{nlwb!/*de\}'c ;;\{nl'-\{\}rw\]'/+,\}##'*\}#nc,',#nw\]'/+kd'+e\}+;#'rdq#w! nr'/ ') \}+\}\{rl#'\{n' ')# \}'+\}##(!!/"] + :$a<-50?[string compare [format %c $b] [string index $c 0]]==0?[append \ + xxx [string index $c 31];scan [string index $c 31] %c x;set x] + :[12days -65 $b [string range $c 1 end]]:[12days [expr ([string compare \ + [string index $c 0] "/"]==0)+$a] $b [string range $c 1 end]]:0<$a + ?[12days 2 2 "%s"]:[string compare [string index $c 0] "/"]==0|| + [12days 0 [12days -61 [scan [string index $c 0] %c x; set x] \ + "!ek;dc i@bK'(q)-\[w\]*%n+r3#l,\{\}:\nuwloca-O;m .vpbks,fxntdCeghiry"] \ + [string range $c 1 end]]} +} +proc do_twelve_days {} { + global xxx + set xxx "" + 12days 1 1 1 + string length $xxx +} + +# start of tests + +catch {unset a b i x} + +test expr-1.1 {TclCompileExprCmd: no expression} { + list [catch {expr } msg] $msg +} {1 {wrong # args: should be "expr arg ?arg ...?"}} +test expr-1.2 {TclCompileExprCmd: one expression word} { + expr -25 +} -25 +test expr-1.3 {TclCompileExprCmd: two expression words} { + expr -8.2 -6 +} -14.2 +test expr-1.4 {TclCompileExprCmd: five expression words} { + expr 20 - 5 +10 -7 +} 18 +test expr-1.5 {TclCompileExprCmd: quoted expression word} { + expr "0005" +} 5 +test expr-1.6 {TclCompileExprCmd: quoted expression word} { + catch {expr "0005"zxy} msg + set msg +} {quoted string doesn't terminate properly} +test expr-1.7 {TclCompileExprCmd: expression word in braces} { + expr {-0005} +} -5 +test expr-1.8 {TclCompileExprCmd: expression word in braces} { + expr {{-0x1234}} +} -4660 +test expr-1.9 {TclCompileExprCmd: expression word in braces} { + catch {expr {-0005}foo} msg + set msg +} {argument word in braces doesn't terminate properly} +test expr-1.10 {TclCompileExprCmd: other expression word in braces} { + expr 4*[llength "6 2"] +} 8 +test expr-1.11 {TclCompileExprCmd: expression word terminated by ;} { + expr 4*[llength "6 2"]; +} 8 +test expr-1.12 {TclCompileExprCmd: inlined expr (in "catch") inside other catch} { + set a xxx + catch { + # Might not be a number + set a [expr 10*$a] + } +} 1 +test expr-1.13 {TclCompileExprCmd: second level of substitutions in expr not in braces with single var reference} { + set a xxx + set x 27; set bool {$x}; if $bool {set a foo} + set a +} foo +test expr-1.14 {TclCompileExprCmd: second level of substitutions in expr with comparison as top-level operator} { + set a xxx + set x 2; set b {$x}; set a [expr $b == 2] + set a +} 1 + +test expr-2.1 {TclCompileExpr: are builtin functions registered?} { + expr double(5*[llength "6 2"]) +} 10.0 +test expr-2.2 {TclCompileExpr: error in expr} { + catch {expr 2**3} msg + set msg +} {syntax error in expression "2**3"} +test expr-2.3 {TclCompileExpr: junk after legal expr} { + catch {expr 7*[llength "a b"]foo} msg + set msg +} {syntax error in expression "7*2foo"} +test expr-2.4 {TclCompileExpr: numeric expr string rep == formatted int rep} { + expr {0001} +} 1 + +test expr-3.1 {CompileCondExpr: just lor expr} {expr 3||0} 1 +test expr-3.2 {CompileCondExpr: error in lor expr} { + catch {expr x||3} msg + set msg +} {syntax error in expression "x||3"} +test expr-3.3 {CompileCondExpr: test true arm} {expr 3>2?44:66} 44 +test expr-3.4 {CompileCondExpr: error compiling true arm} { + catch {expr 3>2?2**3:66} msg + set msg +} {syntax error in expression "3>2?2**3:66"} +test expr-3.5 {CompileCondExpr: test false arm} {expr 2>3?44:66} 66 +test expr-3.6 {CompileCondExpr: error compiling false arm} { + catch {expr 2>3?44:2**3} msg + set msg +} {syntax error in expression "2>3?44:2**3"} +test expr-3.7 {CompileCondExpr: long arms & nested cond exprs} {unixOnly nonPortable} { + puts "Note: doing test expr-3.7 which can take several minutes to run" + hello_world +} {Hello world} +catch {unset xxx} +test expr-3.8 {CompileCondExpr: long arms & nested cond exprs} {unixOnly nonPortable} { + puts "Note: doing test expr-3.8 which can take several minutes to run" + do_twelve_days +} 2358 +catch {unset xxx} + +test expr-4.1 {CompileLorExpr: just land expr} {expr 1.3&&3.3} 1 +test expr-4.2 {CompileLorExpr: error in land expr} { + catch {expr x&&3} msg + set msg +} {syntax error in expression "x&&3"} +test expr-4.3 {CompileLorExpr: simple lor exprs} {expr 0||1.0} 1 +test expr-4.4 {CompileLorExpr: simple lor exprs} {expr 3.0||0.0} 1 +test expr-4.5 {CompileLorExpr: simple lor exprs} {expr 0||0||1} 1 +test expr-4.6 {CompileLorExpr: error compiling lor arm} { + catch {expr 2**3||4.0} msg + set msg +} {syntax error in expression "2**3||4.0"} +test expr-4.7 {CompileLorExpr: error compiling lor arm} { + catch {expr 1.3||2**3} msg + set msg +} {syntax error in expression "1.3||2**3"} +test expr-4.8 {CompileLorExpr: error compiling lor arms} { + list [catch {expr {"a"||"b"}} msg] $msg +} {1 {expected boolean value but got "a"}} +test expr-4.9 {CompileLorExpr: long lor arm} { + set a "abcdefghijkl" + set i 7 + expr {[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]] || [string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]] || [string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]] || [string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]&&[string compare [format %c $i] [string index $a $i]]} +} 1 + +test expr-5.1 {CompileLandExpr: just bitor expr} {expr 7|0x13} 23 +test expr-5.2 {CompileLandExpr: error in bitor expr} { + catch {expr x|3} msg + set msg +} {syntax error in expression "x|3"} +test expr-5.3 {CompileLandExpr: simple land exprs} {expr 0&&1.0} 0 +test expr-5.4 {CompileLandExpr: simple land exprs} {expr 0&&0} 0 +test expr-5.5 {CompileLandExpr: simple land exprs} {expr 3.0&&1.2} 1 +test expr-5.6 {CompileLandExpr: simple land exprs} {expr 1&&1&&2} 1 +test expr-5.7 {CompileLandExpr: error compiling land arm} { + catch {expr 2**3&&4.0} msg + set msg +} {syntax error in expression "2**3&&4.0"} +test expr-5.8 {CompileLandExpr: error compiling land arm} { + catch {expr 1.3&&2**3} msg + set msg +} {syntax error in expression "1.3&&2**3"} +test expr-5.9 {CompileLandExpr: error compiling land arm} { + list [catch {expr {"a"&&"b"}} msg] $msg +} {1 {expected boolean value but got "a"}} +test expr-5.10 {CompileLandExpr: long land arms} { + set a "abcdefghijkl" + set i 7 + expr {[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]] && [string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]] && [string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]] && [string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]^[string compare [format %c 103] [string index $a $i]]^[string compare [format %c 105] [string index $a $i]]} +} 1 + +test expr-6.1 {CompileBitXorExpr: just bitand expr} {expr 7&0x13} 3 +test expr-6.2 {CompileBitXorExpr: error in bitand expr} { + catch {expr x|3} msg + set msg +} {syntax error in expression "x|3"} +test expr-6.3 {CompileBitXorExpr: simple bitxor exprs} {expr 7^0x13} 20 +test expr-6.4 {CompileBitXorExpr: simple bitxor exprs} {expr 3^0x10} 19 +test expr-6.5 {CompileBitXorExpr: simple bitxor exprs} {expr 0^7} 7 +test expr-6.6 {CompileBitXorExpr: simple bitxor exprs} {expr -1^7} -8 +test expr-6.7 {CompileBitXorExpr: error compiling bitxor arm} { + catch {expr 2**3|6} msg + set msg +} {syntax error in expression "2**3|6"} +test expr-6.8 {CompileBitXorExpr: error compiling bitxor arm} { + catch {expr 2^x} msg + set msg +} {syntax error in expression "2^x"} +test expr-6.9 {CompileBitXorExpr: runtime error in bitxor arm} { + list [catch {expr {24.0^3}} msg] $msg +} {1 {can't use floating-point value as operand of "^"}} +test expr-6.10 {CompileBitXorExpr: runtime error in bitxor arm} { + list [catch {expr {"a"^"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "^"}} + +test expr-7.1 {CompileBitAndExpr: just equality expr} {expr 3==2} 0 +test expr-7.2 {CompileBitAndExpr: just equality expr} {expr 2.0==2} 1 +test expr-7.3 {CompileBitAndExpr: just equality expr} {expr 3.2!=2.2} 1 +test expr-7.4 {CompileBitAndExpr: just equality expr} {expr {"abc" == "abd"}} 0 +test expr-7.5 {CompileBitAndExpr: error in equality expr} { + catch {expr x==3} msg + set msg +} {syntax error in expression "x==3"} +test expr-7.6 {CompileBitAndExpr: simple bitand exprs} {expr 7&0x13} 3 +test expr-7.7 {CompileBitAndExpr: simple bitand exprs} {expr 0xf2&0x53} 82 +test expr-7.8 {CompileBitAndExpr: simple bitand exprs} {expr 3&6} 2 +test expr-7.9 {CompileBitAndExpr: simple bitand exprs} {expr -1&-7} -7 +test expr-7.10 {CompileBitAndExpr: error compiling bitand arm} { + catch {expr 2**3&6} msg + set msg +} {syntax error in expression "2**3&6"} +test expr-7.11 {CompileBitAndExpr: error compiling bitand arm} { + catch {expr 2&x} msg + set msg +} {syntax error in expression "2&x"} +test expr-7.12 {CompileBitAndExpr: runtime error in bitand arm} { + list [catch {expr {24.0&3}} msg] $msg +} {1 {can't use floating-point value as operand of "&"}} +test expr-7.13 {CompileBitAndExpr: runtime error in bitand arm} { + list [catch {expr {"a"&"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "&"}} + +test expr-8.1 {CompileEqualityExpr: just relational expr} {expr 3>=2} 1 +test expr-8.2 {CompileEqualityExpr: just relational expr} {expr 2<=2.1} 1 +test expr-8.3 {CompileEqualityExpr: just relational expr} {expr 3.2>"2.2"} 1 +test expr-8.4 {CompileEqualityExpr: just relational expr} {expr {"0y"<"0x12"}} 0 +test expr-8.5 {CompileEqualityExpr: error in relational expr} { + catch {expr x>3} msg + set msg +} {syntax error in expression "x>3"} +test expr-8.6 {CompileEqualityExpr: simple equality exprs} {expr 7==0x13} 0 +test expr-8.7 {CompileEqualityExpr: simple equality exprs} {expr -0xf2!=0x53} 1 +test expr-8.8 {CompileEqualityExpr: simple equality exprs} {expr {"12398712938788234-1298379" != ""}} 1 +test expr-8.9 {CompileEqualityExpr: simple equality exprs} {expr -1!="abc"} 1 +test expr-8.10 {CompileEqualityExpr: error compiling equality arm} { + catch {expr 2**3==6} msg + set msg +} {syntax error in expression "2**3==6"} +test expr-8.11 {CompileEqualityExpr: error compiling equality arm} { + catch {expr 2!=x} msg + set msg +} {syntax error in expression "2!=x"} + + +test expr-9.1 {CompileRelationalExpr: just shift expr} {expr 3<<2} 12 +test expr-9.2 {CompileRelationalExpr: just shift expr} {expr 0xff>>2} 63 +test expr-9.3 {CompileRelationalExpr: just shift expr} {expr -1>>2} -1 +test expr-9.4 {CompileRelationalExpr: just shift expr} {expr {1<<3}} 8 + +# The following test is different for 32-bit versus 64-bit +# architectures because LONG_MIN is different + +if {0x80000000 > 0} { + test expr-9.5 {CompileRelationalExpr: shift expr producing LONG_MIN} {nonPortable} { + expr {1<<63} + } -9223372036854775808 +} else { + test expr-9.5 {CompileRelationalExpr: shift expr producing LONG_MIN} {nonPortable} { + expr {1<<31} + } -2147483648 +} +test expr-9.6 {CompileRelationalExpr: error in shift expr} { + catch {expr x>>3} msg + set msg +} {syntax error in expression "x>>3"} +test expr-9.7 {CompileRelationalExpr: simple relational exprs} {expr 0xff>=+0x3} 1 +test expr-9.8 {CompileRelationalExpr: simple relational exprs} {expr -0xf2<0x3} 1 +test expr-9.9 {CompileRelationalExpr: error compiling relational arm} { + catch {expr 2**3>6} msg + set msg +} {syntax error in expression "2**3>6"} +test expr-9.10 {CompileRelationalExpr: error compiling relational arm} { + catch {expr 2<x} msg + set msg +} {syntax error in expression "2<x"} + +test expr-10.1 {CompileShiftExpr: just add expr} {expr 4+-2} 2 +test expr-10.2 {CompileShiftExpr: just add expr} {expr 0xff-2} 253 +test expr-10.3 {CompileShiftExpr: just add expr} {expr -1--2} 1 +test expr-10.4 {CompileShiftExpr: just add expr} {expr 1-0123} -82 +test expr-10.5 {CompileShiftExpr: error in add expr} { + catch {expr x+3} msg + set msg +} {syntax error in expression "x+3"} +test expr-10.6 {CompileShiftExpr: simple shift exprs} {expr 0xff>>0x3} 31 +test expr-10.7 {CompileShiftExpr: simple shift exprs} {expr -0xf2<<0x3} -1936 +test expr-10.8 {CompileShiftExpr: error compiling shift arm} { + catch {expr 2**3>>6} msg + set msg +} {syntax error in expression "2**3>>6"} +test expr-10.9 {CompileShiftExpr: error compiling shift arm} { + catch {expr 2<<x} msg + set msg +} {syntax error in expression "2<<x"} +test expr-10.10 {CompileShiftExpr: runtime error} { + list [catch {expr {24.0>>43}} msg] $msg +} {1 {can't use floating-point value as operand of ">>"}} +test expr-10.11 {CompileShiftExpr: runtime error} { + list [catch {expr {"a"<<"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "<<"}} + +test expr-11.1 {CompileAddExpr: just multiply expr} {expr 4*-2} -8 +test expr-11.2 {CompileAddExpr: just multiply expr} {expr 0xff%2} 1 +test expr-11.3 {CompileAddExpr: just multiply expr} {expr -1/2} -1 +test expr-11.4 {CompileAddExpr: just multiply expr} {expr 7891%0123} 6 +test expr-11.5 {CompileAddExpr: error in multiply expr} { + catch {expr x*3} msg + set msg +} {syntax error in expression "x*3"} +test expr-11.6 {CompileAddExpr: simple add exprs} {expr 0xff++0x3} 258 +test expr-11.7 {CompileAddExpr: simple add exprs} {expr -0xf2--0x3} -239 +test expr-11.8 {CompileAddExpr: error compiling add arm} { + catch {expr 2**3+6} msg + set msg +} {syntax error in expression "2**3+6"} +test expr-11.9 {CompileAddExpr: error compiling add arm} { + catch {expr 2-x} msg + set msg +} {syntax error in expression "2-x"} +test expr-11.10 {CompileAddExpr: runtime error} { + list [catch {expr {24.0+"xx"}} msg] $msg +} {1 {can't use non-numeric string as operand of "+"}} +test expr-11.11 {CompileAddExpr: runtime error} { + list [catch {expr {"a"-"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "-"}} +test expr-11.12 {CompileAddExpr: runtime error} { + list [catch {expr {3/0}} msg] $msg +} {1 {divide by zero}} +test expr-11.13 {CompileAddExpr: runtime error} { + list [catch {expr {2.3/0.0}} msg] $msg +} {1 {divide by zero}} + +test expr-12.1 {CompileMultiplyExpr: just unary expr} {expr ~4} -5 +test expr-12.2 {CompileMultiplyExpr: just unary expr} {expr --5} 5 +test expr-12.3 {CompileMultiplyExpr: just unary expr} {expr !27} 0 +test expr-12.4 {CompileMultiplyExpr: just unary expr} {expr ~0xff00ff} -16711936 +test expr-12.5 {CompileMultiplyExpr: error in unary expr} { + catch {expr ~x} msg + set msg +} {syntax error in expression "~x"} +test expr-12.6 {CompileMultiplyExpr: simple multiply exprs} {expr 0xff*0x3} 765 +test expr-12.7 {CompileMultiplyExpr: simple multiply exprs} {expr -0xf2%-0x3} -2 +test expr-12.8 {CompileMultiplyExpr: error compiling multiply arm} { + catch {expr 2*3%%6} msg + set msg +} {syntax error in expression "2*3%%6"} +test expr-12.9 {CompileMultiplyExpr: error compiling multiply arm} { + catch {expr 2*x} msg + set msg +} {syntax error in expression "2*x"} +test expr-12.10 {CompileMultiplyExpr: runtime error} { + list [catch {expr {24.0*"xx"}} msg] $msg +} {1 {can't use non-numeric string as operand of "*"}} +test expr-12.11 {CompileMultiplyExpr: runtime error} { + list [catch {expr {"a"/"b"}} msg] $msg +} {1 {can't use non-numeric string as operand of "/"}} + +test expr-13.1 {CompileUnaryExpr: unary exprs} {expr -0xff} -255 +test expr-13.2 {CompileUnaryExpr: unary exprs} {expr +000123} 83 +test expr-13.3 {CompileUnaryExpr: unary exprs} {expr +--++36} 36 +test expr-13.4 {CompileUnaryExpr: unary exprs} {expr !2} 0 +test expr-13.5 {CompileUnaryExpr: unary exprs} {expr +--+-62.0} -62.0 +test expr-13.6 {CompileUnaryExpr: unary exprs} {expr !0.0} 1 +test expr-13.7 {CompileUnaryExpr: unary exprs} {expr !0xef} 0 +test expr-13.8 {CompileUnaryExpr: error compiling unary expr} { + catch {expr ~x} msg + set msg +} {syntax error in expression "~x"} +test expr-13.9 {CompileUnaryExpr: error compiling unary expr} { + catch {expr !1.x} msg + set msg +} {syntax error in expression "!1.x"} +test expr-13.10 {CompileUnaryExpr: runtime error} { + list [catch {expr {~"xx"}} msg] $msg +} {1 {can't use non-numeric string as operand of "~"}} +test expr-13.11 {CompileUnaryExpr: runtime error} { + list [catch {expr ~4.0} msg] $msg +} {1 {can't use floating-point value as operand of "~"}} +test expr-13.12 {CompileUnaryExpr: just primary expr} {expr 0x123} 291 +test expr-13.13 {CompileUnaryExpr: just primary expr} { + set a 27 + expr $a +} 27 +test expr-13.14 {CompileUnaryExpr: just primary expr} { + expr double(27) +} 27.0 +test expr-13.15 {CompileUnaryExpr: just primary expr} {expr "123"} 123 +test expr-13.16 {CompileUnaryExpr: error in primary expr} { + catch {expr [set]} msg + set msg +} {wrong # args: should be "set varName ?newValue?"} +test expr-14.1 {CompilePrimaryExpr: literal primary} {expr 1} 1 +test expr-14.2 {CompilePrimaryExpr: literal primary} {expr 123} 123 +test expr-14.3 {CompilePrimaryExpr: literal primary} {expr 0xff} 255 +test expr-14.4 {CompilePrimaryExpr: literal primary} {expr 00010} 8 +test expr-14.5 {CompilePrimaryExpr: literal primary} {expr 62.0} 62.0 +test expr-14.6 {CompilePrimaryExpr: literal primary} { + expr 3.1400000 +} 3.14 +test expr-14.7 {CompilePrimaryExpr: literal primary} {expr {{abcde}<{abcdef}}} 1 +test expr-14.8 {CompilePrimaryExpr: literal primary} {expr {{abc\ +def} < {abcdef}}} 1 +test expr-14.9 {CompilePrimaryExpr: literal primary} {expr {{abc\tde} > {abc\tdef}}} 0 +test expr-14.10 {CompilePrimaryExpr: literal primary} {expr {{123}}} 123 +test expr-14.11 {CompilePrimaryExpr: var reference primary} { + set i 789 + list [expr {$i}] [expr $i] +} {789 789} +test expr-14.12 {CompilePrimaryExpr: var reference primary} { + set i {789} ;# test expr's aggressive conversion to numeric semantics + list [expr {$i}] [expr $i] +} {789 789} +test expr-14.13 {CompilePrimaryExpr: var reference primary} { + catch {unset a} + set a(foo) foo + set a(bar) bar + set a(123) 123 + set result "" + lappend result [expr $a(123)] [expr {$a(bar)<$a(foo)}] + catch {unset a} + set result +} {123 1} +test expr-14.14 {CompilePrimaryExpr: var reference primary} { + set i 123 ;# test "$var.0" floating point conversion hack + list [expr $i] [expr $i.0] [expr $i.0/12.0] +} {123 123.0 10.25} +test expr-14.15 {CompilePrimaryExpr: var reference primary} { + set i 123 + catch {expr $i.2} msg + set msg +} 123.2 +test expr-14.16 {CompilePrimaryExpr: error compiling var reference primary} { + catch {expr {$a(foo}} msg + set errorInfo +} {missing ) + (parsing index for array "a") + while compiling +"expr {$a(foo}"} +test expr-14.17 {CompilePrimaryExpr: string primary that looks like var ref} { + expr $ +} $ +test expr-14.18 {CompilePrimaryExpr: quoted string primary} { + expr "21" +} 21 +test expr-14.19 {CompilePrimaryExpr: quoted string primary} { + set i 123 + set x 456 + expr "$i+$x" +} 579 +test expr-14.20 {CompilePrimaryExpr: quoted string primary} { + set i 3 + set x 6 + expr 2+"$i.$x" +} 5.6 +test expr-14.21 {CompilePrimaryExpr: error in quoted string primary} { + catch {expr "[set]"} msg + set msg +} {wrong # args: should be "set varName ?newValue?"} +test expr-14.22 {CompilePrimaryExpr: subcommand primary} { + expr {[set i 123; set i]} +} 123 +test expr-14.23 {CompilePrimaryExpr: error in subcommand primary} { + catch {expr {[set]}} msg + set errorInfo +} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + while compiling +"expr {[set]}"} +test expr-14.24 {CompilePrimaryExpr: error in subcommand primary} { + catch {expr {[set i}} msg + set errorInfo +} {missing close-bracket or close-brace + while compiling +"set i" + while compiling +"expr {[set i}"} +test expr-14.25 {CompilePrimaryExpr: math function primary} { + format %.6g [expr exp(1.0)] +} 2.71828 +test expr-14.26 {CompilePrimaryExpr: math function primary} { + format %.6g [expr pow(2.0+0.1,3.0+0.1)] +} 9.97424 +test expr-14.27 {CompilePrimaryExpr: error in math function primary} { + catch {expr sinh::(2.0)} msg + set errorInfo +} {syntax error in expression "sinh::(2.0)" + while executing +"expr sinh::(2.0)"} +test expr-14.28 {CompilePrimaryExpr: subexpression primary} { + expr 2+(3*4) +} 14 +test expr-14.29 {CompilePrimaryExpr: error in subexpression primary} { + catch {expr 2+(3*[set])} msg + set errorInfo +} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + while compiling +"expr 2+(3*[set])"} +test expr-14.30 {CompilePrimaryExpr: missing paren in subexpression primary} { + catch {expr 2+(3*(4+5)} msg + set errorInfo +} {syntax error in expression "2+(3*(4+5)" + while executing +"expr 2+(3*(4+5)"} +test expr-14.31 {CompilePrimaryExpr: just var ref in subexpression primary} { + set i "5+10" + list "[expr $i] == 15" "[expr ($i)] == 15" "[eval expr ($i)] == 15" +} {{15 == 15} {15 == 15} {15 == 15}} +test expr-14.32 {CompilePrimaryExpr: unexpected token} { + catch {expr @} msg + set errorInfo +} {syntax error in expression "@" + while executing +"expr @"} + +test expr-15.1 {CompileMathFuncCall: missing parenthesis} { + catch {expr sinh2.0)} msg + set errorInfo +} {syntax error in expression "sinh2.0)" + while executing +"expr sinh2.0)"} +test expr-15.2 {CompileMathFuncCall: unknown math function} { + catch {expr whazzathuh(1)} msg + set errorInfo +} {unknown math function "whazzathuh" + while executing +"expr whazzathuh(1)"} +test expr-15.3 {CompileMathFuncCall: too many arguments} { + catch {expr sin(1,2,3)} msg + set errorInfo +} {too many arguments for math function + while executing +"expr sin(1,2,3)"} +test expr-15.4 {CompileMathFuncCall: ')' found before last required arg} { + catch {expr sin()} msg + set errorInfo +} {syntax error in expression "sin()" + while executing +"expr sin()"} +test expr-15.5 {CompileMathFuncCall: too few arguments} { + catch {expr pow(1)} msg + set errorInfo +} {too few arguments for math function + while executing +"expr pow(1)"} +test expr-15.6 {CompileMathFuncCall: missing ')'} { + catch {expr sin(1} msg + set errorInfo +} {syntax error in expression "sin(1" + while executing +"expr sin(1"} +if $gotT1 { + test expr-15.7 {CompileMathFuncCall: call registered math function} { + expr 2*T1() + } 246 + test expr-15.8 {CompileMathFuncCall: call registered math function} { + expr T2()*3 + } 1035 + + test expr-15.9 {CompileMathFuncCall: call registered math function} { + expr T3(21, 37) + } 37 + test expr-15.10 {CompileMathFuncCall: call registered math function} { + expr T3(21.2, 37) + } 37.0 + test expr-15.11 {CompileMathFuncCall: call registered math function} { + expr T3(-21.2, -17.5) + } -17.5 +} + +test expr-16.1 {GetToken: checks whether integer token starting with "0x" (e.g., "0x$") is invalid} { + catch {unset a} + set a(VALUE) ff15 + set i 123 + if {[expr 0x$a(VALUE)] & 16} { + set i {} + } + set i +} {} +test expr-16.2 {GetToken: check for string literal in braces} { + expr {{1}} +} {1} + +# Check "expr" and computed command names. + +test expr-17.1 {expr and computed command names} { + set i 0 + set z expr + $z 1+2 +} 3 + +# Check correct conversion of operands to numbers: If the string looks like +# an integer, convert to integer. Otherwise, if the string looks like a +# double, convert to double. + +test expr-18.1 {expr and conversion of operands to numbers} { + set x [lindex 11 0] + catch {expr int($x)} + expr {$x} +} 11 + +# Check "expr" and interpreter result object resetting before appending +# an error msg during evaluation of exprs not in {}s + +test expr-19.1 {expr and interpreter result object resetting} { + proc p {} { + set t 10.0 + set x 2.0 + set dx 0.2 + set f {$dx-$x/10} + set g {-$x/5} + set center 1.0 + set x [expr $x-$center] + set dx [expr $dx+$g] + set x [expr $x+$f+$center] + set x [expr $x+$f+$center] + set y [expr round($x)] + } + p +} 3 + +unset a diff --git a/tests/fCmd.test b/tests/fCmd.test new file mode 100644 index 0000000..ae2b8b0 --- /dev/null +++ b/tests/fCmd.test @@ -0,0 +1,2102 @@ +# This file tests the tclFCmd.c file. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) fCmd.test 1.33 97/11/03 15:58:08 +# + +if {[string compare test [info procs test]] == 1} then {source defs} + +set platform [testgetplatform] + +if {$user == "root"} { + puts "Skipping fCmd tests. They depend on not being able to write to" + puts "certain directories. It would be too dangerous to run them as root." + return +} + +if {"[info commands testchmod]" != "testchmod"} { + puts "Skipping fCmd tests. This application does not seem to have the" + puts "testchmod command that is needed to run these tests." + return +} + +proc createfile {file {string a}} { + set f [open $file w] + puts -nonewline $f $string + close $f + return $string +} + +# +# checkcontent -- +# +# Ensures that file "file" contains only the string "matchString" +# returns 0 if the file does not exist, or has a different content +# +proc checkcontent {file matchString} { + if {[catch { + set f [open $file] + set fileString [read $f] + close $f + }]} { + return 0 + } + return [string match $matchString $fileString] +} + +proc openup {path} { + testchmod 777 $path + if {[file isdirectory $path]} { + catch { + foreach p [glob [file join $path *]] { + openup $p + } + } + } +} + +proc cleanup {args} { + foreach p ". $args" { + set x "" + catch { + set x [glob [file join $p tf*] [file join $p td*]] + } + foreach file $x { + if {[catch {file delete -force -- $file}]} { + openup $file + file delete -force -- $file + } + } + } +} + +proc contents {file} { + set f [open $file r] + set r [read $f] + close $f + set r +} + +set testConfig(NT) 0 +set testConfig(95) 0 + +switch $tcl_platform(os) { + "Windows NT" {set testConfig(NT) 1} + "Windows 95" {set testConfig(95) 1} +} + +set testConfig(fileSharing) 0 +set testConfig(notFileSharing) 1 + +if {$tcl_platform(platform) == "macintosh"} { + catch {file delete -force foo.dir} + file mkdir foo.dir + if {[catch {file attributes foo.dir -readonly 1}] == 0} { + set testConfig(fileSharing) 1 + set testConfig(notFileSharing) 0 + } + file delete -force foo.dir +} + +set testConfig(xdev) 0 + +if {$tcl_platform(platform) == "unix"} { + if {[catch {set m1 [exec df .]; set m2 [exec df /tmp]}] == 0} { + set m1 [string range $m1 0 [expr [string first " " $m1]-1]] + set m2 [string range $m2 0 [expr [string first " " $m2]-1]] + if {$m1 != "" && $m2 != "" && $m1 != $m2 && [file exists $m1] && [file exists $m2]} { + set testConfig(xdev) 1 + } + } +} + +set root [lindex [file split [pwd]] 0] + +# A really long file name +# length of long is 1216 chars, which should be greater than any static +# buffer or allowable filename. + +set long "abcdefghihjllmnopqrstuvwxyz01234567890" +append long $long +append long $long +append long $long +append long $long +append long $long + +test fCmd-1.1 {TclFileRenameCmd} { + cleanup + createfile tf1 + file rename tf1 tf2 + glob tf* +} {tf2} + +test fCmd-2.1 {TclFileCopyCmd} { + cleanup + createfile tf1 + file copy tf1 tf2 + lsort [glob tf*] +} {tf1 tf2} + +test fCmd-3.1 {FileCopyRename: FileForceOption fails} { + list [catch {file rename -xyz} msg] $msg +} {1 {bad option "-xyz": should be -force or --}} +test fCmd-3.2 {FileCopyRename: not enough args} { + list [catch {file rename xyz} msg] $msg +} {1 {wrong # args: should be "file rename ?options? source ?source ...? target"}} +test fCmd-3.3 {FileCopyRename: Tcl_TranslateFileName fails} { + list [catch {file rename xyz ~nonexistantuser} msg] $msg +} {1 {user "nonexistantuser" doesn't exist}} +test fCmd-3.4 {FileCopyRename: Tcl_TranslateFileName passes} { + cleanup + list [catch {file copy tf1 ~} msg] $msg +} {1 {error copying "tf1": no such file or directory}} +test fCmd-3.5 {FileCopyRename: target doesn't exist: stat(target) != 0} { + cleanup + list [catch {file rename tf1 tf2 tf3} msg] $msg +} {1 {error renaming: target "tf3" is not a directory}} +test fCmd-3.6 {FileCopyRename: target tf3 is not a directory: !S_ISDIR(target)} { + cleanup + createfile tf3 + list [catch {file rename tf1 tf2 tf3} msg] $msg +} {1 {error renaming: target "tf3" is not a directory}} +test fCmd-3.7 {FileCopyRename: target exists & is directory} { + cleanup + file mkdir td1 + createfile tf1 tf1 + file rename tf1 td1 + contents [file join td1 tf1] +} {tf1} +test fCmd-3.8 {FileCopyRename: too many arguments: argc - i > 2} { + cleanup + list [catch {file rename tf1 tf2 tf3} msg] $msg +} {1 {error renaming: target "tf3" is not a directory}} +test fCmd-3.9 {FileCopyRename: too many arguments: argc - i > 2} { + cleanup + list [catch {file copy -force -- tf1 tf2 tf3} msg] $msg +} {1 {error copying: target "tf3" is not a directory}} +test fCmd-3.10 {FileCopyRename: just 2 arguments} { + cleanup + createfile tf1 tf1 + file rename tf1 tf2 + contents tf2 +} {tf1} +test fCmd-3.11 {FileCopyRename: just 2 arguments} { + cleanup + createfile tf1 tf1 + file rename -force -force -- tf1 tf2 + contents tf2 +} {tf1} +test fCmd-3.12 {FileCopyRename: move each source: 1 source} { + cleanup + createfile tf1 tf1 + file mkdir td1 + file rename tf1 td1 + contents [file join td1 tf1] +} {tf1} +test fCmd-3.13 {FileCopyRename: move each source: multiple sources} { + cleanup + createfile tf1 tf1 + createfile tf2 tf2 + createfile tf3 tf3 + createfile tf4 tf4 + file mkdir td1 + file rename tf1 tf2 tf3 tf4 td1 + list [contents [file join td1 tf1]] [contents [file join td1 tf2]] \ + [contents [file join td1 tf3]] [contents [file join td1 tf4]] +} {tf1 tf2 tf3 tf4} +test fCmd-3.14 {FileCopyRename: FileBasename fails} { + cleanup + file mkdir td1 + list [catch {file rename ~nonexistantuser td1} msg] $msg +} {1 {user "nonexistantuser" doesn't exist}} +test fCmd-3.15 {FileCopyRename: source[0] == '\0'} {unixOrPc} { + cleanup + file mkdir td1 + list [catch {file rename / td1} msg] $msg +} {1 {error renaming "/" to "td1": file already exists}} +test fCmd-3.16 {FileCopyRename: break on first error} { + cleanup + createfile tf1 + createfile tf2 + createfile tf3 + createfile tf4 + file mkdir td1 + createfile [file join td1 tf3] + list [catch {file rename tf1 tf2 tf3 tf4 td1} msg] $msg +} [subst {1 {error renaming "tf3" to "[file join td1 tf3]": file already exists}}] + +test fCmd-4.1 {TclFileMakeDirsCmd: make each dir: 1 dir} { + cleanup + file mkdir td1 + glob td* +} {td1} +test fCmd-4.2 {TclFileMakeDirsCmd: make each dir: multiple dirs} { + cleanup + file mkdir td1 td2 td3 + lsort [glob td*] +} {td1 td2 td3} +test fCmd-4.3 {TclFileMakeDirsCmd: stops on first error} { + cleanup + createfile tf1 + catch {file mkdir td1 td2 tf1 td3 td4} + glob td1 td2 tf1 td3 td4 +} {td1 td2 tf1} +test fCmd-4.4 {TclFileMakeDirsCmd: Tcl_TranslateFileName fails} { + cleanup + list [catch {file mkdir ~nonexistantuser} msg] $msg +} {1 {user "nonexistantuser" doesn't exist}} +test fCmd-4.5 {TclFileMakeDirsCmd: Tcl_SplitPath returns 0: *name == '\0'} { + cleanup + list [catch {file mkdir ""} msg] $msg +} {1 {can't create directory "": no such file or directory}} +test fCmd-4.6 {TclFileMakeDirsCmd: one level deep} { + cleanup + file mkdir td1 + glob td1 +} {td1} +test fCmd-4.7 {TclFileMakeDirsCmd: multi levels deep} { + cleanup + file mkdir [file join td1 td2 td3 td4] + glob td1 [file join td1 td2] +} "td1 [file join td1 td2]" +test fCmd-4.8 {TclFileMakeDirsCmd: already exist: lstat(target) == 0} { + cleanup + file mkdir td1 + set x [file exist td1] + file mkdir td1 + list $x [file exist td1] +} {1 1} +test fCmd-4.9 {TclFileMakeDirsCmd: exists, not dir} { + cleanup + createfile tf1 + list [catch {file mkdir tf1} msg] $msg +} [subst {1 {can't create directory "[file join tf1]": file already exists}}] +test fCmd-4.10 {TclFileMakeDirsCmd: exists, is dir} { + cleanup + file mkdir td1 + set x [file exist td1] + file mkdir td1 + list $x [file exist td1] +} {1 1} +test fCmd-4.11 {TclFileMakeDirsCmd: doesn't exist: errno != ENOENT} {unixOnly} { + cleanup + file mkdir td1/td2/td3 + testchmod 000 td1/td2 + set msg [list [catch {file mkdir td1/td2/td3/td4} msg] $msg] + testchmod 755 td1/td2 + set msg +} {1 {can't create directory "td1/td2/td3": permission denied}} +test fCmd-4.12 {TclFileMakeDirsCmd: doesn't exist: errno != ENOENT} {macOnly} { + cleanup + list [catch {file mkdir nonexistantvolume:} msg] $msg +} {1 {can't create directory "nonexistantvolume:": invalid argument}} +test fCmd-4.13 {TclFileMakeDirsCmd: doesn't exist: errno == ENOENT} { + cleanup + set x [file exist td1] + file mkdir td1 + list $x [file exist td1] +} {0 1} +test fCmd-4.14 {TclFileMakeDirsCmd: TclpCreateDirectory fails} {unixOnly} { + cleanup + file delete -force foo + file mkdir foo + file attr foo -perm 040000 + set result [list [catch {file mkdir foo/tf1} msg] $msg] + file delete -force foo + set result +} {1 {can't create directory "foo/tf1": permission denied}} +test fCmd-4.15 {TclFileMakeDirsCmd: TclpCreateDirectory fails} {macOnly} { + list [catch {file mkdir ${root}:} msg] $msg +} [subst {1 {can't create directory "${root}:": no such file or directory}}] +test fCmd-4.16 {TclFileMakeDirsCmd: TclpCreateDirectory succeeds} { + cleanup + file mkdir tf1 + file exists tf1 +} {1} + +test fCmd-5.1 {TclFileDeleteCmd: FileForceOption fails} { + list [catch {file delete -xyz} msg] $msg +} {1 {bad option "-xyz": should be -force or --}} +test fCmd-5.2 {TclFileDeleteCmd: not enough args} { + list [catch {file delete -force -force} msg] $msg +} {1 {wrong # args: should be "file delete ?options? file ?file ...?"}} +test fCmd-5.3 {TclFileDeleteCmd: 1 file} { + cleanup + createfile tf1 + createfile tf2 + file mkdir td1 + file delete tf2 + glob tf* td* +} {tf1 td1} +test fCmd-5.4 {TclFileDeleteCmd: multiple files} { + cleanup + createfile tf1 + createfile tf2 + file mkdir td1 + set x [list [file exist tf1] [file exist tf2] [file exist td1]] + file delete tf1 td1 tf2 + lappend x [file exist tf1] [file exist tf2] [file exist tf3] +} {1 1 1 0 0 0} +test fCmd-5.5 {TclFileDeleteCmd: stop at first error} {unixOrPc} { + cleanup + createfile tf1 + createfile tf2 + file mkdir td1 + catch {file delete tf1 td1 $root tf2} + list [file exist tf1] [file exist tf2] [file exist td1] +} {0 1 0} +test fCmd-5.6 {TclFileDeleteCmd: Tcl_TranslateFileName fails} { + list [catch {file delete ~nonexistantuser} msg] $msg +} {1 {user "nonexistantuser" doesn't exist}} +test fCmd-5.7 {TclFileDeleteCmd: Tcl_TranslateFileName succeeds} { + catch {file delete ~/tf1} + createfile ~/tf1 + file delete ~/tf1 +} {} +test fCmd-5.8 {TclFileDeleteCmd: file doesn't exist: lstat(name) != 0} { + cleanup + set x [file exist tf1] + file delete tf1 + list $x [file exist tf1] +} {0 0} +test fCmd-5.9 {TclFileDeleteCmd: is directory} { + cleanup + file mkdir td1 + file delete td1 + file exist td1 +} {0} +test fCmd-5.10 {TclFileDeleteCmd: TclpRemoveDirectory fails} { + cleanup + file mkdir td1/td2 + list [catch {file delete td1} msg] $msg +} {1 {error deleting "td1": directory not empty}} + +test fCmd-6.1 {CopyRenameOneFile: bad source} { + # can't test this, because it's caught by FileCopyRename +} {} +test fCmd-6.2 {CopyRenameOneFile: bad target} { + # can't test this, because it's caught by FileCopyRename +} {} +test fCmd-6.3 {CopyRenameOneFile: lstat(source) != 0} { + cleanup + list [catch {file rename tf1 tf2} msg] $msg +} {1 {error renaming "tf1": no such file or directory}} +test fCmd-6.4 {CopyRenameOneFile: lstat(source) == 0} { + cleanup + createfile tf1 + file rename tf1 tf2 + glob tf* +} {tf2} +test fCmd-6.5 {CopyRenameOneFile: lstat(target) != 0} { + cleanup + createfile tf1 + file rename tf1 tf2 + glob tf* +} {tf2} +test fCmd-6.6 {CopyRenameOneFile: errno != ENOENT} {unixOnly} { + cleanup + file mkdir td1 + testchmod 000 td1 + createfile tf1 + set msg [list [catch {file rename tf1 td1} msg] $msg] + testchmod 755 td1 + set msg +} {1 {error renaming "tf1" to "td1/tf1": permission denied}} +test fCmd-6.7 {CopyRenameOneFile: errno != ENOENT} {95} { + cleanup + createfile tf1 + list [catch {file rename tf1 $long} msg] $msg +} [subst {1 {error renaming "tf1" to "$long": file name too long}}] +test fCmd-6.8 {CopyRenameOneFile: errno != ENOENT} {macOnly} { + cleanup + createfile tf1 + list [catch {file rename tf1 $long} msg] $msg +} [subst {1 {error renaming "tf1" to "$long": file name too long}}] +test fCmd-6.9 {CopyRenameOneFile: errno == ENOENT} {unixOnly} { + cleanup + createfile tf1 + file rename tf1 tf2 + glob tf* +} {tf2} +test fCmd-6.10 {CopyRenameOneFile: lstat(target) == 0} { + cleanup + createfile tf1 + createfile tf2 + list [catch {file rename tf1 tf2} msg] $msg +} {1 {error renaming "tf1" to "tf2": file already exists}} +test fCmd-6.11 {CopyRenameOneFile: force == 0} { + cleanup + createfile tf1 + createfile tf2 + list [catch {file rename tf1 tf2} msg] $msg +} {1 {error renaming "tf1" to "tf2": file already exists}} +test fCmd-6.12 {CopyRenameOneFile: force != 0} { + cleanup + createfile tf1 + createfile tf2 + file rename -force tf1 tf2 + glob tf* +} {tf2} +test fCmd-6.13 {CopyRenameOneFile: source is dir, target is file} { + cleanup + file mkdir td1 + file mkdir td2 + createfile [file join td2 td1] + list [catch {file rename -force td1 td2} msg] $msg +} [subst {1 {can't overwrite file "[file join td2 td1]" with directory "td1"}}] +test fCmd-6.14 {CopyRenameOneFile: source is file, target is dir} { + cleanup + createfile tf1 + file mkdir [file join td1 tf1] + list [catch {file rename -force tf1 td1} msg] $msg +} [subst {1 {can't overwrite directory "[file join td1 tf1]" with file "tf1"}}] +test fCmd-6.15 {CopyRenameOneFile: TclpRenameFile succeeds} { + cleanup + file mkdir [file join td1 td2] + file mkdir td2 + createfile [file join td2 tf1] + file rename -force td2 td1 + file exists [file join td1 td2 tf1] +} {1} +test fCmd-6.16 {CopyRenameOneFile: TclpCopyRenameOneFile fails} { + cleanup + file mkdir [file join td1 td2] + createfile [file join td1 td2 tf1] + file mkdir td2 + list [catch {file rename -force td2 td1} msg] $msg +} [subst {1 {error renaming "td2" to "[file join td1 td2]": file already exists}}] +test fCmd-6.17 {CopyRenameOneFile: errno == EINVAL} {!$testConfig(win32s) || ($root == "C:/")} { + # Don't run this test under Win32s on a drive mounted from an NT + # machine; it causes the NT machine to die. + + cleanup + list [catch {file rename -force $root tf1} msg] $msg +} [subst {1 {error renaming "$root" to "tf1": trying to rename a volume or move a directory into itself}}] +test fCmd-6.18 {CopyRenameOneFile: errno != EXDEV} { + cleanup + file mkdir [file join td1 td2] + createfile [file join td1 td2 tf1] + file mkdir td2 + list [catch {file rename -force td2 td1} msg] $msg +} [subst {1 {error renaming "td2" to "[file join td1 td2]": file already exists}}] +test fCmd-6.19 {CopyRenameOneFile: errno == EXDEV} {unixOnly} { + cleanup /tmp + createfile tf1 + file rename tf1 /tmp + glob tf* /tmp/tf1 +} {/tmp/tf1} +test fCmd-6.20 {CopyRenameOneFile: errno == EXDEV} {pcOnly} { + catch {file delete -force c:/tcl8975@ d:/tcl8975@} + file mkdir c:/tcl8975@ + if [catch {file rename c:/tcl8975@ d:/}] { + list d:/tcl8975@ + } else { + set msg [glob c:/tcl8975@ d:/tcl8975@] + file delete -force d:/tcl8975@ + set msg + } +} {d:/tcl8975@} +test fCmd-6.21 {CopyRenameOneFile: copy/rename: S_ISDIR(source)} {unixOnly} { + cleanup /tmp + file mkdir td1 + file rename td1 /tmp + glob td* /tmp/td* +} {/tmp/td1} +test fCmd-6.22 {CopyRenameOneFile: copy/rename: !S_ISDIR(source)} {unixOnly} { + cleanup /tmp + createfile tf1 + file rename tf1 /tmp + glob tf* /tmp/tf* +} {/tmp/tf1} +test fCmd-6.23 {CopyRenameOneFile: TclpCopyDirectory failed} {unixOnly xdev} { + cleanup /tmp + file mkdir td1/td2/td3 + exec chmod 000 td1 + set msg [list [catch {file rename td1 /tmp} msg] $msg] + exec chmod 755 td1 + set msg +} {1 {error renaming "td1": permission denied}} +test fCmd-6.24 {CopyRenameOneFile: error uses original name} {unixOnly} { + cleanup + file mkdir ~/td1/td2 + exec chmod 000 [file join [file dirname ~] [file tail ~] td1] + set msg [list [catch {file copy ~/td1 td1} msg] $msg] + exec chmod 755 [file join [file dirname ~] [file tail ~] td1] + file delete -force ~/td1 + set msg +} {1 {error copying "~/td1": permission denied}} +test fCmd-6.25 {CopyRenameOneFile: error uses original name} {unixOnly} { + cleanup + file mkdir td2 + file mkdir ~/td1 + exec chmod 000 [file join [file dirname ~] [file tail ~] td1] + set msg [list [catch {file copy td2 ~/td1} msg] $msg] + exec chmod 755 [file join [file dirname ~] [file tail ~] td1] + file delete -force ~/td1 + set msg +} {1 {error copying "td2" to "~/td1/td2": permission denied}} +test fCmd-6.26 {CopyRenameOneFile: doesn't use original name} {unixOnly} { + cleanup + file mkdir ~/td1/td2 + exec chmod 000 [file join [file dirname ~] [file tail ~] td1 td2] + set msg [list [catch {file copy ~/td1 td1} msg] $msg] + exec chmod 755 [file join [file dirname ~] [file tail ~] td1 td2] + file delete -force ~/td1 + set msg +} "1 {error copying \"~/td1\" to \"td1\": \"[file join [file dirname ~] [file tail ~] td1 td2]\": permission denied}" +test fCmd-6.27 {CopyRenameOneFile: TclpCopyDirectory failed} {unixOnly xdev} { + cleanup /tmp + file mkdir td1/td2/td3 + file mkdir /tmp/td1 + createfile /tmp/td1/tf1 + list [catch {file rename -force td1 /tmp} msg] $msg +} {1 {error renaming "td1" to "/tmp/td1": file already exists}} +test fCmd-6.28 {CopyRenameOneFile: TclpCopyDirectory failed} {unixOnly xdev} { + cleanup /tmp + file mkdir td1/td2/td3 + exec chmod 000 td1/td2/td3 + set msg [list [catch {file rename td1 /tmp} msg] $msg] + exec chmod 755 td1/td2/td3 + set msg +} {1 {error renaming "td1" to "/tmp/td1": "td1/td2/td3": permission denied}} +test fCmd-6.29 {CopyRenameOneFile: TclpCopyDirectory passed} {unixOnly xdev} { + cleanup /tmp + file mkdir td1/td2/td3 + file rename td1 /tmp + glob td* /tmp/td1/t* +} {/tmp/td1/td2} +test fCmd-6.30 {CopyRenameOneFile: TclpRemoveDirectory failed} {unixOnly} { + cleanup + file mkdir foo/bar + file attr foo -perm 040555 + set msg [list [catch {file rename foo/bar /tmp} msg] $msg] + set a1 {1 {can't unlink "foo/bar": permission denied}} + set result [expr {$msg == $a1}] + catch {file delete /tmp/bar} + catch {file attr foo -perm 040777} + catch {file delete -force foo} + set result +} {1} +test fCmd-6.31 {CopyRenameOneFile: TclpDeleteFile passed} {unixOnly xdev} { + catch {cleanup /tmp} + file mkdir /tmp/td1 + createfile /tmp/td1/tf1 + file rename /tmp/td1/tf1 tf1 + list [file exists /tmp/td1/tf1] [file exists tf1] +} {0 1} +test fCmd-6.32 {CopyRenameOneFile: copy} { + cleanup + list [catch {file copy tf1 tf2} msg] $msg +} {1 {error copying "tf1": no such file or directory}} +catch {cleanup /tmp} + +test fCmd-7.1 {FileForceOption: none} { + cleanup + file mkdir [file join tf1 tf2] + list [catch {file delete tf1} msg] $msg +} {1 {error deleting "tf1": directory not empty}} +test fCmd-7.2 {FileForceOption: -force} { + cleanup + file mkdir [file join tf1 tf2] + file delete -force tf1 +} {} +test fCmd-7.3 {FileForceOption: --} { + createfile -tf1 + file delete -- -tf1 +} {} +test fCmd-7.4 {FileForceOption: bad option} { + createfile -tf1 + set msg [list [catch {file delete -tf1} msg] $msg] + file delete -- -tf1 + set msg +} {1 {bad option "-tf1": should be -force or --}} +test fCmd-7.5 {FileForceOption: multiple times through loop} { + createfile -- + createfile -force + file delete -force -force -- -- -force + list [catch {glob -- -- -force} msg] $msg +} {1 {no files matched glob patterns "-- -force"}} + +test fCmd-8.1 {FileBasename: basename of ~user: argc == 1 && *path == ~} {unixOnly} { + file mkdir td1 + file attr td1 -perm 040000 + set result [list [catch {file rename ~$user td1} msg] $msg] + file delete -force td1 + set result +} "1 {error renaming \"~$user\" to \"td1/[file tail ~$user]\": permission denied}" + +test fCmd-9.1 {file rename: comprehensive: EACCES} {unixOnly} { + cleanup + file mkdir td1 + file mkdir td2 + file attr td2 -perm 040000 + set result [list [catch {file rename td1 td2/} msg] $msg] + file delete -force td2 + file delete -force td1 + set result +} {1 {error renaming "td1" to "td2/td1": permission denied}} +test fCmd-9.2 {file rename: comprehensive: source doesn't exist} { + cleanup + list [catch {file rename tf1 tf2} msg] $msg +} {1 {error renaming "tf1": no such file or directory}} +test fCmd-9.3 {file rename: comprehensive: file to new name} { + cleanup + createfile tf1 + createfile tf2 + testchmod 444 tf2 + file rename tf1 tf3 + file rename tf2 tf4 + list [lsort [glob tf*]] [file writable tf3] [file writable tf4] +} {{tf3 tf4} 1 0} +test fCmd-9.4 {file rename: comprehensive: dir to new name} {unixOrPc} { + cleanup + file mkdir td1 td2 + testchmod 555 td2 + file rename td1 td3 + file rename td2 td4 + list [lsort [glob td*]] [file writable td3] [file writable td4] +} {{td3 td4} 1 0} +test fCmd-9.5 {file rename: comprehensive: file to self} { + cleanup + createfile tf1 tf1 + createfile tf2 tf2 + testchmod 444 tf2 + file rename -force tf1 tf1 + file rename -force tf2 tf2 + list [contents tf1] [contents tf2] [file writable tf1] [file writable tf2] +} {tf1 tf2 1 0} +test fCmd-9.6 {file rename: comprehensive: dir to self} {unixOrPc} { + cleanup + file mkdir td1 + file mkdir td2 + testchmod 555 td2 + file rename -force td1 . + file rename -force td2 . + list [lsort [glob td*]] [file writable td1] [file writable td2] +} {{td1 td2} 1 0} +test fCmd-9.7 {file rename: comprehensive: file to existing file} { + cleanup + createfile tf1 + createfile tf2 + createfile tfs1 + createfile tfs2 + createfile tfs3 + createfile tfs4 + createfile tfd1 + createfile tfd2 + createfile tfd3 + createfile tfd4 + testchmod 444 tfs3 + testchmod 444 tfs4 + testchmod 444 tfd2 + testchmod 444 tfd4 + set msg [list [catch {file rename tf1 tf2} msg] $msg] + file rename -force tfs1 tfd1 + file rename -force tfs2 tfd2 + file rename -force tfs3 tfd3 + file rename -force tfs4 tfd4 + list [lsort [glob tf*]] $msg [file writable tfd1] [file writable tfd2] [file writable tfd3] [file writable tfd4] +} {{tf1 tf2 tfd1 tfd2 tfd3 tfd4} {1 {error renaming "tf1" to "tf2": file already exists}} 1 1 0 0} +test fCmd-9.8 {file rename: comprehensive: dir to empty dir} { + # Under unix, you can rename a read-only directory, but you can't + # move it into another directory. + + cleanup + file mkdir td1 + file mkdir [file join td2 td1] + file mkdir tds1 + file mkdir tds2 + file mkdir tds3 + file mkdir tds4 + file mkdir [file join tdd1 tds1] + file mkdir [file join tdd2 tds2] + file mkdir [file join tdd3 tds3] + file mkdir [file join tdd4 tds4] + if {$tcl_platform(platform) != "unix" && $tcl_platform(platform) != "macintosh"} { + testchmod 555 tds3 + testchmod 555 tds4 + } + if {$tcl_platform(platform) != "macintosh"} { + testchmod 555 [file join tdd2 tds2] + testchmod 555 [file join tdd4 tds4] + } + set msg [list [catch {file rename td1 td2} msg] $msg] + file rename -force tds1 tdd1 + file rename -force tds2 tdd2 + file rename -force tds3 tdd3 + file rename -force tds4 tdd4 + if {$tcl_platform(platform) != "unix" && $tcl_platform(platform) != "macintosh"} { + set w3 [file writable [file join tdd3 tds3]] + set w4 [file writable [file join tdd4 tds4]] + } else { + set w3 0 + set w4 0 + } + list [lsort [glob td*]] $msg [file writable [file join tdd1 tds1]] \ + [file writable [file join tdd2 tds2]] $w3 $w4 +} [subst {{td1 td2 tdd1 tdd2 tdd3 tdd4} {1 {error renaming "td1" to "[file join td2 td1]": file already exists}} 1 1 0 0}] +test fCmd-9.9 {file rename: comprehensive: dir to non-empty dir} { + cleanup + file mkdir tds1 + file mkdir tds2 + file mkdir [file join tdd1 tds1 xxx] + file mkdir [file join tdd2 tds2 xxx] + if {$tcl_platform(platform) != "unix" && $tcl_platform(platform) != "macintosh"} { + testchmod 555 tds2 + } + set a1 [list [catch {file rename -force tds1 tdd1} msg] $msg] + set a2 [list [catch {file rename -force tds2 tdd2} msg] $msg] + if {$tcl_platform(platform) != "unix" && $tcl_platform(platform) != "macintosh"} { + set w2 [file writable tds2] + } else { + set w2 0 + } + list [lsort [glob td*]] $a1 $a2 [file writable tds1] $w2 +} [subst {{tdd1 tdd2 tds1 tds2} {1 {error renaming "tds1" to "[file join tdd1 tds1]": file already exists}} {1 {error renaming "tds2" to "[file join tdd2 tds2]": file already exists}} 1 0}] +test fCmd-9.10 {file rename: comprehensive: file to new name and dir} { + cleanup + createfile tf1 + createfile tf2 + file mkdir td1 + testchmod 444 tf2 + file rename tf1 [file join td1 tf3] + file rename tf2 [file join td1 tf4] + list [catch {glob tf*}] [lsort [glob [file join td1 t*]]] \ + [file writable [file join td1 tf3]] [file writable [file join td1 tf4]] +} [subst {1 {[file join td1 tf3] [file join td1 tf4]} 1 0}] +test fCmd-9.11 {file rename: comprehensive: dir to new name and dir} { + cleanup + file mkdir td1 + file mkdir td2 + file mkdir td3 + if {$tcl_platform(platform) != "unix" && $tcl_platform(platform) != "macintosh"} { + testchmod 555 td2 + } + file rename td1 [file join td3 td3] + file rename td2 [file join td3 td4] + if {$tcl_platform(platform) != "unix" && $tcl_platform(platform) != "macintosh"} { + set w4 [file writable [file join td3 td4]] + } else { + set w4 0 + } + list [lsort [glob td*]] [lsort [glob [file join td3 t*]]] \ + [file writable [file join td3 td3]] $w4 +} [subst {td3 {[file join td3 td3] [file join td3 td4]} 1 0}] +test fCmd-9.12 {file rename: comprehensive: target exists} { + cleanup + file mkdir [file join td1 td2] [file join td2 td1] + if {$tcl_platform(platform) != "macintosh"} { + testchmod 555 [file join td2 td1] + } + file mkdir [file join td3 td4] [file join td4 td3] + file rename -force td3 td4 + set msg [list [file exists td3] [file exists [file join td4 td3 td4]] \ + [catch {file rename td1 td2} msg] $msg] + if {$tcl_platform(platform) != "macintosh"} { + testchmod 755 [file join td2 td1] + } + set msg +} [subst {0 1 1 {error renaming "td1" to "[file join td2 td1]": file already exists}}] +test fCmd-9.13 {file rename: comprehensive: can't overwrite target} { + cleanup + file mkdir [file join td1 td2] [file join td2 td1 td4] + list [catch {file rename -force td1 td2} msg] $msg +} [subst {1 {error renaming "td1" to "[file join td2 td1]": file already exists}}] +test fCmd-9.14 {file rename: comprehensive: dir into self} { + cleanup + file mkdir td1 + list [glob td*] [list [catch {file rename td1 td1} msg] $msg] +} [subst {td1 {1 {error renaming "td1" to "[file join td1 td1]": trying to rename a volume or move a directory into itself}}}] +test fCmd-9.15 {file rename: comprehensive: source and target incompatible} { + cleanup + file mkdir td1 + createfile tf1 + list [catch {file rename -force td1 tf1} msg] $msg +} {1 {can't overwrite file "tf1" with directory "td1"}} +test fCmd-9.16 {file rename: comprehensive: source and target incompatible} { + cleanup + file mkdir td1/tf1 + createfile tf1 + list [catch {file rename -force tf1 td1} msg] $msg +} [subst {1 {can't overwrite directory "[file join td1 tf1]" with file "tf1"}}] + +test fCmd-10.1 {file copy: comprehensive: source doesn't exist} { + cleanup + list [catch {file copy tf1 tf2} msg] $msg +} {1 {error copying "tf1": no such file or directory}} +test fCmd-10.2 {file copy: comprehensive: file to new name} { + cleanup + createfile tf1 tf1 + createfile tf2 tf2 + testchmod 444 tf2 + file copy tf1 tf3 + file copy tf2 tf4 + list [lsort [glob tf*]] [contents tf3] [contents tf4] [file writable tf3] [file writable tf4] +} {{tf1 tf2 tf3 tf4} tf1 tf2 1 0} +test fCmd-10.3 {file copy: comprehensive: dir to new name} {unixOrPc} { + cleanup + file mkdir [file join td1 tdx] + file mkdir [file join td2 tdy] + testchmod 555 td2 + file copy td1 td3 + file copy td2 td4 + set msg [list [lsort [glob td*]] [glob [file join td3 t*]] \ + [glob [file join td4 t*]] [file writable td3] [file writable td4]] + if {$tcl_platform(platform) != "macintosh"} { + testchmod 755 td2 + testchmod 755 td4 + } + set msg +} [subst {{td1 td2 td3 td4} [file join td3 tdx] [file join td4 tdy] 1 0}] +test fCmd-10.4 {file copy: comprehensive: file to existing file} { + cleanup + createfile tf1 + createfile tf2 + createfile tfs1 + createfile tfs2 + createfile tfs3 + createfile tfs4 + createfile tfd1 + createfile tfd2 + createfile tfd3 + createfile tfd4 + testchmod 444 tfs3 + testchmod 444 tfs4 + testchmod 444 tfd2 + testchmod 444 tfd4 + set msg [list [catch {file copy tf1 tf2} msg] $msg] + file copy -force tfs1 tfd1 + file copy -force tfs2 tfd2 + file copy -force tfs3 tfd3 + file copy -force tfs4 tfd4 + list [lsort [glob tf*]] $msg [file writable tfd1] [file writable tfd2] [file writable tfd3] [file writable tfd4] +} {{tf1 tf2 tfd1 tfd2 tfd3 tfd4 tfs1 tfs2 tfs3 tfs4} {1 {error copying "tf1" to "tf2": file already exists}} 1 1 0 0} +test fCmd-10.5 {file copy: comprehensive: dir to empty dir} { + cleanup + file mkdir td1 + file mkdir [file join td2 td1] + file mkdir tds1 + file mkdir tds2 + file mkdir tds3 + file mkdir tds4 + file mkdir [file join tdd1 tds1] + file mkdir [file join tdd2 tds2] + file mkdir [file join tdd3 tds3] + file mkdir [file join tdd4 tds4] + if {$tcl_platform(platform) != "macintosh"} { + testchmod 555 tds3 + testchmod 555 tds4 + testchmod 555 [file join tdd2 tds2] + testchmod 555 [file join tdd4 tds4] + } + set a1 [list [catch {file copy td1 td2} msg] $msg] + set a2 [list [catch {file copy -force tds1 tdd1} msg] $msg] + set a3 [catch {file copy -force tds2 tdd2}] + set a4 [catch {file copy -force tds3 tdd3}] + set a5 [catch {file copy -force tds4 tdd4}] + list [lsort [glob td*]] $a1 $a2 $a3 $a4 $a5 +} [subst {{td1 td2 tdd1 tdd2 tdd3 tdd4 tds1 tds2 tds3 tds4} {1 {error copying "td1" to "[file join td2 td1]": file already exists}} {1 {error copying "tds1" to "[file join tdd1 tds1]": file already exists}} 1 1 1}] +test fCmd-10.6 {file copy: comprehensive: dir to non-empty dir} {unixOrPc} { + cleanup + file mkdir tds1 + file mkdir tds2 + file mkdir [file join tdd1 tds1 xxx] + file mkdir [file join tdd2 tds2 xxx] + testchmod 555 tds2 + set a1 [list [catch {file copy -force tds1 tdd1} msg] $msg] + set a2 [list [catch {file copy -force tds2 tdd2} msg] $msg] + list [lsort [glob td*]] $a1 $a2 [file writable tds1] [file writable tds2] +} [subst {{tdd1 tdd2 tds1 tds2} {1 {error copying "tds1" to "[file join tdd1 tds1]": file already exists}} {1 {error copying "tds2" to "[file join tdd2 tds2]": file already exists}} 1 0}] +test fCmd-10.7 {file rename: comprehensive: file to new name and dir} { + cleanup + createfile tf1 + createfile tf2 + file mkdir td1 + testchmod 444 tf2 + file copy tf1 [file join td1 tf3] + file copy tf2 [file join td1 tf4] + list [lsort [glob tf*]] [lsort [glob [file join td1 t*]]] \ + [file writable [file join td1 tf3]] [file writable [file join td1 tf4]] +} [subst {{tf1 tf2} {[file join td1 tf3] [file join td1 tf4]} 1 0}] +test fCmd-10.8 {file rename: comprehensive: dir to new name and dir} {unixOrPc} { + cleanup + file mkdir td1 + file mkdir td2 + file mkdir td3 + testchmod 555 td2 + file copy td1 [file join td3 td3] + file copy td2 [file join td3 td4] + list [lsort [glob td*]] [lsort [glob [file join td3 t*]]] \ + [file writable [file join td3 td3]] [file writable [file join td3 td4]] +} [subst {{td1 td2 td3} {[file join td3 td3] [file join td3 td4]} 1 0}] +test fCmd-10.9 {file copy: comprehensive: source and target incompatible} { + cleanup + file mkdir td1 + createfile tf1 + list [catch {file copy -force td1 tf1} msg] $msg +} {1 {can't overwrite file "tf1" with directory "td1"}} +test fCmd-10.10 {file copy: comprehensive: source and target incompatible} { + cleanup + file mkdir [file join td1 tf1] + createfile tf1 + list [catch {file copy -force tf1 td1} msg] $msg +} [subst {1 {can't overwrite directory "[file join td1 tf1]" with file "tf1"}}] +cleanup + +# old tests + +test fCmd-11.1 {TclFileRenameCmd: -- option } { + catch {file delete -force -- -tfa1} + set s [createfile -tfa1] + file rename -- -tfa1 tfa2 + set result [expr [checkcontent tfa2 $s] && ![file exists -tfa1]] + file delete tfa2 + set result +} {1} + +test fCmd-11.2 {TclFileRenameCmd: bad option } { + catch {file delete -force -- tfa1} + set s [createfile tfa1] + set r1 [catch {file rename -x tfa1 tfa2}] + set result [expr $r1 && [checkcontent tfa1 $s] && ![file exists tfa2]] + file delete tfa1 + set result +} {1} + +test fCmd-11.3 {TclFileRenameCmd: bad \# args} { + catch {file rename -- } +} {1} + +test fCmd-11.4 {TclFileRenameCmd: target filename translation failing} { + global env + set temp $env(HOME) + unset env(HOME) + set result [catch {file rename tfa ~/foobar }] + set env(HOME) $temp + set result + } {1} + +test fCmd-11.5 {TclFileRenameCmd: more than one source and target is not a directory} { + catch {file delete -force -- tfa1 tfa2 tfa3} + createfile tfa1 + createfile tfa2 + createfile tfa3 + set result [catch {file rename tfa1 tfa2 tfa3}] + file delete tfa1 tfa2 tfa3 + set result +} {1} + +test fCmd-11.6 {TclFileRenameCmd: : single file into directory } { + catch {file delete -force -- tfa1 tfad} + set s [createfile tfa1] + file mkdir tfad + file rename tfa1 tfad + set result [expr [checkcontent tfad/tfa1 $s] && ![file exists tfa1]] + file delete -force tfad + set result +} {1} + +test fCmd-11.7 {TclFileRenameCmd: : multiple files into directory } { + catch {file delete -force -- tfa1 tfa2 tfad} + set s1 [createfile tfa1 ] + set s2 [createfile tfa2 ] + file mkdir tfad + file rename tfa1 tfa2 tfad + set r1 [checkcontent tfad/tfa1 $s1] + set r2 [checkcontent tfad/tfa2 $s2] + + set result [expr $r1 && $r2 && ![file exists tfa1] && ![file exists tfa2]] + + file delete -force tfad + set result +} {1} + +test fCmd-11.8 {TclFileRenameCmd: error renaming file to directory } { + catch {file delete -force -- tfa tfad} + set s [createfile tfa ] + file mkdir tfad + file mkdir tfad/tfa + set r1 [catch {file rename tfa tfad}] + set r2 [checkcontent tfa $s] + set r3 [file isdir tfad] + set result [expr $r1 && $r2 && $r3 ] + file delete -force tfa tfad + set result +} {1} + +# +# Coverage tests for renamefile() ; +# +test fCmd-12.1 {renamefile: source filename translation failing} { + global env + set temp $env(HOME) + unset env(HOME) + set result [catch {file rename ~/tfa1 tfa2}] + set env(HOME) $temp + set result +} {1} + +test fCmd-12.2 {renamefile: src filename translation failing} { + global env + set temp $env(HOME) + unset env(HOME) + set s [createfile tfa1] + file mkdir tfad + set result [catch {file rename tfa1 ~/tfa2 tfad}] + set env(HOME) $temp + file delete -force tfad + set result +} {1} + +test fCmd-12.3 {renamefile: stat failing on source} { + catch {file delete -force -- tfa1 tfa2} + set r1 [catch {file rename tfa1 tfa2}] + expr {$r1 && ![file exists tfa1] && ![file exists tfa2]} +} {1} + +test fCmd-12.4 {renamefile: error renaming file to directory } { + catch {file delete -force -- tfa tfad} + set s1 [createfile tfa ] + file mkdir tfad + file mkdir tfad/tfa + set r1 [catch {file rename tfa tfad}] + set r2 [checkcontent tfa $s1] + set r3 [file isdir tfad/tfa] + set result [expr $r1 && $r2 && $r3] + file delete -force tfa tfad + set result +} {1} + +test fCmd-12.5 {renamefile: error renaming directory to file } { + catch {file delete -force -- tfa tfad} + file mkdir tfa + file mkdir tfad + set s [createfile tfad/tfa] + set r1 [catch {file rename tfa tfad}] + set r2 [checkcontent tfad/tfa $s] + set r3 [file isdir tfad] + set r4 [file isdir tfa] + set result [expr $r1 && $r2 && $r3 && $r4 ] + file delete -force tfa tfad + set result +} {1} + +test fCmd-12.6 {renamefile: TclRenameFile succeeding } { + catch {file delete -force -- tfa1 tfa2} + set s [createfile tfa1] + file rename tfa1 tfa2 + set result [expr [checkcontent tfa2 $s] && ![file exists tfa1]] + file delete tfa2 + set result +} {1} + +test fCmd-12.7 {renamefile: renaming directory into offspring} { + catch {file delete -force -- tfad} + file mkdir tfad + file mkdir tfad/dir + set result [catch {file rename tfad tfad/dir}] + file delete -force tfad + set result +} {1} + +test fCmd-12.8 {renamefile: generic error } {unixOnly} { + catch {file delete -force -- tfa} + file mkdir tfa + file mkdir tfa/dir + exec chmod 555 tfa + set result [catch {file rename tfa/dir tfa2}] + exec chmod 777 tfa + file delete -force tfa + set result +} {1} + + +test fCmd-12.9 {renamefile: moving a file across volumes } {unixOnly} { + catch {file delete -force -- tfa /tmp/tfa} + set s [createfile tfa ] + file rename tfa /tmp + set result [expr [checkcontent /tmp/tfa $s] && ![file exists tfa]] + file delete /tmp/tfa + set result +} {1} + +test fCmd-12.10 {renamefile: moving a directory across volumes } {unixOnly} { + catch {file delete -force -- tfad /tmp/tfad} + file mkdir tfad + set s [createfile tfad/a ] + file rename tfad /tmp + set restul [expr [checkcontent /tmp/tfad/a $s] && ![file exists tfad]] + file delete -force /tmp/tfad + set result +} {1} + +# +# Coverage tests for TclCopyFilesCmd() +# +test fCmd-13.1 {TclCopyFilesCmd: -force option } { + catch {file delete -force -- tfa1} + set s [createfile tfa1] + file copy -force tfa1 tfa2 + set result [expr [checkcontent tfa2 $s] && [checkcontent tfa1 $s]] + file delete tfa1 tfa2 + set result +} {1} + +test fCmd-13.2 {TclCopyFilesCmd: -- option } { + catch {file delete -force -- tfa1} + set s [createfile -tfa1] + file copy -- -tfa1 tfa2 + set result [expr [checkcontent tfa2 $s] && [checkcontent -tfa1 $s]] + file delete -- -tfa1 tfa2 + set result +} {1} + +test fCmd-13.3 {TclCopyFilesCmd: bad option } { + catch {file delete -force -- tfa1} + set s [createfile tfa1] + set r1 [catch {file copy -x tfa1 tfa2}] + set result [expr $r1 && [checkcontent tfa1 $s] && ![file exists tfa2]] + file delete tfa1 + set result +} {1} + +test fCmd-13.4 {TclCopyFilesCmd: bad \# args} { + catch {file copy -- } +} {1} + +test fCmd-13.5 {TclCopyFilesCmd: target filename translation failing} { + global env + set temp $env(HOME) + unset env(HOME) + set result [catch {file copy tfa ~/foobar }] + set env(HOME) $temp + set result + } {1} + +test fCmd-13.6 {TclCopyFilesCmd: more than one source and target is not a directory} { + catch {file delete -force -- tfa1 tfa2 tfa3} + createfile tfa1 + createfile tfa2 + createfile tfa3 + set result [catch {file copy tfa1 tfa2 tfa3}] + file delete tfa1 tfa2 tfa3 + set result +} {1} + +test fCmd-13.7 {TclCopyFilesCmd: : single file into directory } { + catch {file delete -force -- tfa1 tfad} + set s [createfile tfa1] + file mkdir tfad + file copy tfa1 tfad + set result [expr [checkcontent tfad/tfa1 $s] && [checkcontent tfa1 $s]] + file delete -force tfad tfa1 + set result +} {1} + +test fCmd-13.8 {TclCopyFilesCmd: : multiple files into directory } { + catch {file delete -force -- tfa1 tfa2 tfad} + set s1 [createfile tfa1 ] + set s2 [createfile tfa2 ] + file mkdir tfad + file copy tfa1 tfa2 tfad + set r1 [checkcontent tfad/tfa1 $s1] + set r2 [checkcontent tfad/tfa2 $s2] + set r3 [checkcontent tfa1 $s1] + set r4 [checkcontent tfa2 $s2] + set result [expr $r1 && $r2 && $r3 && $r4 ] + + file delete -force tfad tfa1 tfa2 + set result +} {1} + +test fCmd-13.9 {TclCopyFilesCmd: error copying file to directory } { + catch {file delete -force -- tfa tfad} + set s [createfile tfa ] + file mkdir tfad + file mkdir tfad/tfa + set r1 [catch {file copy tfa tfad}] + set r2 [expr [checkcontent tfa $s] && [file isdir tfad/tfa]] + set r3 [file isdir tfad] + set result [expr $r1 && $r2 && $r3 ] + file delete -force tfa tfad + set result +} {1} + +# +# Coverage tests for copyfile() +# +test fCmd-14.1 {copyfile: source filename translation failing} { + global env + set temp $env(HOME) + unset env(HOME) + set result [catch {file copy ~/tfa1 tfa2}] + set env(HOME) $temp + set result +} {1} + +test fCmd-14.2 {copyfile: dst filename translation failing} { + global env + set temp $env(HOME) + unset env(HOME) + set s [createfile tfa1] + file mkdir tfad + set r1 [catch {file copy tfa1 ~/tfa2 tfad}] + set result [expr $r1 && [checkcontent tfad/tfa1 $s]] + set env(HOME) $temp + file delete -force tfa1 tfad + set result +} {1} + +test fCmd-14.3 {copyfile: stat failing on source} { + catch {file delete -force -- tfa1 tfa2} + set r1 [catch {file copy tfa1 tfa2}] + expr $r1 && ![file exists tfa1] && ![file exists tfa2] +} {1} + +test fCmd-14.4 {copyfile: error copying file to directory } { + catch {file delete -force -- tfa tfad} + set s1 [createfile tfa ] + file mkdir tfad + file mkdir tfad/tfa + set r1 [catch {file copy tfa tfad}] + set r2 [checkcontent tfa $s1] + set r3 [file isdir tfad] + set r4 [file isdir tfad/tfa] + set result [expr $r1 && $r2 && $r3 && $r4 ] + file delete -force tfa tfad + set result +} {1} + + test fCmd-14.5 {copyfile: error copying directory to file } { + catch {file delete -force -- tfa tfad} + file mkdir tfa + file mkdir tfad + set s [createfile tfad/tfa] + set r1 [catch {file copy tfa tfad}] + set r2 [checkcontent tfad/tfa $s] + set r3 [file isdir tfad] + set r4 [file isdir tfa] + set result [expr $r1 && $r2 && $r3 && $r4 ] + file delete -force tfa tfad + set result +} {1} + +test fCmd-14.6 {copyfile: copy file succeeding } { + catch {file delete -force -- tfa tfa2} + set s [createfile tfa] + file copy tfa tfa2 + set result [expr [checkcontent tfa $s] && [checkcontent tfa2 $s]] + file delete tfa tfa2 + set result +} {1} + +test fCmd-14.7 {copyfile: copy directory succeeding } { + catch {file delete -force -- tfa tfa2} + file mkdir tfa + set s [createfile tfa/file] + file copy tfa tfa2 + set result [expr [checkcontent tfa/file $s] && [checkcontent tfa2/file $s]] + file delete -force tfa tfa2 + set result +} {1} + +test fCmd-14.8 {copyfile: copy directory failing } {unixOnly} { + catch {file delete -force -- tfa} + file mkdir tfa/dir/a/b/c + exec chmod 000 tfa/dir + set r1 [catch {file copy tfa tfa2}] + exec chmod 777 tfa/dir + set result $r1 + file delete -force tfa tfa2 + set result +} {1} + +# +# Coverage tests for TclMkdirCmd() +# +test fCmd-15.1 {TclMakeDirsCmd: target filename translation failing} { + global env + set temp $env(HOME) + unset env(HOME) + set result [catch {file mkdir ~/tfa}] + set env(HOME) $temp + set result +} {1} +# +# Can Tcl_SplitPath return argc == 0? If so them we need a +# test for that code. +# +test fCmd-15.2 {TclMakeDirsCmd - one directory } { + catch {file delete -force -- tfa} + file mkdir tfa + set result [file isdirectory tfa] + file delete tfa + set result +} {1} + +test fCmd-15.3 {TclMakeDirsCmd: - two directories } { + catch {file delete -force -- tfa1 tfa2} + file mkdir tfa1 tfa2 + set result [expr [file isdirectory tfa1] && [file isdirectory tfa2]] + file delete tfa1 tfa2 + set result +} {1} + +test fCmd-15.4 {TclMakeDirsCmd - stat failing } {unixOnly} { + catch {file delete -force -- tfa} + file mkdir tfa + createfile tfa/file + exec chmod 000 tfa + set result [catch {file mkdir tfa/file}] + exec chmod 777 tfa + file delete -force tfa + set result +} {1} + +test fCmd-15.5 {TclMakeDirsCmd: - making a directory several levels deep } { + catch {file delete -force -- tfa} + file mkdir tfa/a/b/c + set result [file isdir tfa/a/b/c] + file delete -force tfa + set result +} {1} + + +test fCmd-15.6 {TclMakeDirsCmd: - trying to overwrite a file } { + catch {file delete -force -- tfa} + set s [createfile tfa] + set r1 [catch {file mkdir tfa}] + set r2 [file isdir tfa] + set r3 [file exists tfa] + set result [expr $r1 && !$r2 && $r3 && [checkcontent tfa $s]] + file delete tfa + set result +} {1} + +test fCmd-15.7 {TclMakeDirsCmd - making several directories } { + catch {file delete -force -- tfa1 tfa2} + file mkdir tfa1 tfa2/a/b/c + set result [expr [file isdir tfa1] && [file isdir tfa2/a/b/c]] + file delete -force tfa1 tfa2 + set result +} {1} + +test fCmd-15.8 {TclFileMakeDirsCmd: trying to create an existing dir} { + file mkdir tfa + file mkdir tfa + set result [file isdir tfa] + file delete tfa + set result +} {1} + + +# Coverage tests for TclDeleteFilesCommand() +test fCmd-16.1 { test the -- argument } { + catch {file delete -force -- tfa} + createfile tfa + file delete -- tfa + file exists tfa +} {0} + +test fCmd-16.2 { test the -force and -- arguments } { + catch {file delete -force -- tfa} + createfile tfa + file delete -force -- tfa + file exists tfa +} {0} + +test fCmd-16.3 { test bad option } { + catch {file delete -force -- tfa} + createfile tfa + set result [catch {file delete -dog tfa}] + file delete tfa + set result +} {1} + +test fCmd-16.4 { test not enough args } { + catch {file delete} +} {1} + +test fCmd-16.5 { test not enough args with options } { + catch {file delete --} +} {1} + +test fCmd-16.6 {delete: source filename translation failing} { + global env + set temp $env(HOME) + unset env(HOME) + set result [catch {file delete ~/tfa}] + set env(HOME) $temp + set result +} {1} + +test fCmd-16.7 {remove a non-empty directory without -force } { + catch {file delete -force -- tfa} + file mkdir tfa + createfile tfa/a + set result [catch {file delete tfa }] + file delete -force tfa + set result +} {1} + +test fCmd-16.8 {remove a normal file } { + catch {file delete -force -- tfa} + file mkdir tfa + createfile tfa/a + set result [catch {file delete tfa }] + file delete -force tfa + set result +} {1} + +test fCmd-16.9 {error while deleting file } {unixOnly} { + catch {file delete -force -- tfa} + file mkdir tfa + createfile tfa/a + exec chmod 555 tfa + set result [catch {file delete tfa/a }] + ####### + ####### If any directory in a tree that is being removed does not + ####### have write permission, the process will fail! + ####### This is also the case with "rm -rf" + ####### + exec chmod 777 tfa + file delete -force tfa + set result +} {1} + +test fCmd-16.10 {deleting multiple files } { + catch {file delete -force -- tfa1 tfa2} + createfile tfa1 + createfile tfa2 + file delete tfa1 tfa2 + expr ![file exists tfa1] && ![file exists tfa2] +} {1} + +test fCmd-16.11 { TclFileDeleteCmd: removing a nonexistant file} { + catch {file delete -force -- tfa} + file delete tfa + set result 1 +} {1} + +# More coverage tests for mkpath() + test fCmd-17.1 {mkdir stat failing on target but not ENOENT } {unixOnly} { + catch {file delete -force -- tfa1} + file mkdir tfa1 + exec chmod 555 tfa1 + set result [catch {file mkdir tfa1/tfa2}] + exec chmod 777 tfa1 + file delete -force tfa1 + set result +} {1} + +test fCmd-17.2 {mkdir several levels deep - relative } { + catch {file delete -force -- tfa} + file mkdir tfa/a/b + set result [file isdir tfa/a/b ] + file delete tfa/a/b tfa/a tfa + set result +} {1} + +test fCmd-17.3 {mkdir several levels deep - absolute } { + catch {file delete -force -- tfa} + set f [file join [pwd] tfa a ] + file mkdir $f + set result [file isdir $f ] + file delete $f [file join [pwd] tfa] + set result +} {1} + +# +# Functionality tests for TclFileRenameCmd() +# + +test fCmd-18.1 {TclFileRenameCmd: rename (first form) in the same directory} { + catch {file delete -force -- tfad} + file mkdir tfad/dir + cd tfad/dir + set s [createfile foo ] + file rename foo bar + file rename bar ./foo + file rename ./foo bar + file rename ./bar ./foo + file rename foo ../dir/bar + file rename ../dir/bar ./foo + file rename ../../tfad/dir/foo ../../tfad/dir/bar + file rename [file join [pwd] bar] foo + file rename foo [file join [pwd] bar] + set result [expr [checkcontent bar $s] && ![file exists foo]] + cd ../.. + file delete -force tfad + set result +} {1} + +test fCmd-18.2 {TclFileRenameCmd: single dir to nonexistant } { + catch {file delete -force -- tfa1 tfa2} + file mkdir tfa1 + file rename tfa1 tfa2 + set result [expr [file exists tfa2] && ![file exists tfa1]] + file delete tfa2 + set result +} {1} + +test fCmd-18.3 {TclFileRenameCmd: mixed dirs and files into directory } { + catch {file delete -force -- tfa1 tfad1 tfad2} + set s [createfile tfa1 ] + file mkdir tfad1 tfad2 + file rename tfa1 tfad1 tfad2 + set r1 [checkcontent tfad2/tfa1 $s] + set r2 [file isdir tfad2/tfad1] + set result [expr $r1 && $r2 && ![file exists tfa1] && ![file exists tfad1]] + file delete tfad2/tfa1 + file delete -force tfad2 + set result +} {1} + +test fCmd-18.4 {TclFileRenameCmd: attempt to replace non-dir with dir } { + catch {file delete -force -- tfa tfad} + set s [createfile tfa ] + file mkdir tfad + set r1 [catch {file rename tfad tfa}] + set r2 [checkcontent tfa $s] + set r3 [file isdir tfad] + set result [expr $r1 && $r2 && $r3 ] + file delete tfa tfad + set result +} {1} + +test fCmd-18.5 {TclFileRenameCmd: attempt to replace dir with non-dir } { + catch {file delete -force -- tfa tfad} + set s [createfile tfa ] + file mkdir tfad/tfa + set r1 [catch {file rename tfa tfad}] + set r2 [checkcontent tfa $s] + set r3 [file isdir tfad/tfa] + set result [expr $r1 && $r2 && $r3 ] + file delete -force tfa tfad + set result +} {1} + +# +# On Windows there is no easy way to determine if two files are the same +# +test fCmd-18.6 {TclFileRenameCmd: rename a file to itself} {macOrUnix} { + catch {file delete -force -- tfa} + set s [createfile tfa] + set r1 [catch {file rename tfa tfa}] + set result [expr $r1 && [checkcontent tfa $s]] + file delete tfa + set result +} {1} + +test fCmd-18.7 {TclFileRenameCmd: rename dir on top of another empty dir w/o -force} { + catch {file delete -force -- tfa tfad} + file mkdir tfa tfad/tfa + set r1 [catch {file rename tfa tfad}] + set result [expr $r1 && [file isdir tfa]] + file delete -force tfa tfad + set result +} {1} + +test fCmd-18.8 {TclFileRenameCmd: rename dir on top of another empty dir w/ -force} { + catch {file delete -force -- tfa tfad} + file mkdir tfa tfad/tfa + file rename -force tfa tfad + set result [expr ![file isdir tfa]] + file delete -force tfad + set result +} {1} + +test fCmd-18.9 {TclFileRenameCmd: rename dir on top of a non-empty dir w/o -force} { + catch {file delete -force -- tfa tfad} + file mkdir tfa tfad/tfa/file + set r1 [catch {file rename tfa tfad}] + set result [expr $r1 && [file isdir tfa] && [file isdir tfad/tfa/file]] + file delete -force tfa tfad + set result +} {1} + +test fCmd-18.10 {TclFileRenameCmd: rename dir on top of a non-empty dir w/ -force} { + catch {file delete -force -- tfa tfad} + file mkdir tfa tfad/tfa/file + set r1 [catch {file rename -force tfa tfad}] + set result [expr $r1 && [file isdir tfa] && [file isdir tfad/tfa/file]] + file delete -force tfa tfad + set result +} {1} + +test fCmd-18.11 {TclFileRenameCmd: rename a non-existant file} { + catch {file delete -force -- tfa1} + set r1 [catch {file rename tfa1 tfa2}] + set result [expr $r1 && ![file exists tfa1] && ![file exists tfa2]] +} {1} + +test fCmd-18.12 {TclFileRenameCmd : rename a symbolic link to file} {unixOnly} { + catch {file delete -force -- tfa1 tfa2 tfa3} + + set s [createfile tfa1] + exec ln -s tfa1 tfa2 + file rename tfa2 tfa3 + set t [file type tfa3] + set result [expr { $t == "link" }] + file delete tfa1 tfa3 + set result +} {1} + +test fCmd-18.13 {TclFileRenameCmd : rename a symbolic link to dir} {unixOnly} { + catch {file delete -force -- tfa1 tfa2 tfa3} + + file mkdir tfa1 + exec ln -s tfa1 tfa2 + file rename tfa2 tfa3 + set t [file type tfa3] + set result [expr { $t == "link" }] + file delete tfa1 tfa3 + set result +} {1} + +test fCmd-18.14 {TclFileRenameCmd : rename a path with sym link} {unixOnly} { + catch {file delete -force -- tfa1 tfa2 tfa3} + + file mkdir tfa1/a/b/c/d + file mkdir tfa2 + set f [file join [pwd] tfa1/a/b] + set f2 [file join [pwd] {tfa2/b alias}] + exec ln -s $f $f2 + file rename {tfa2/b alias/c} tfa3 + set r1 [file isdir tfa3] + set r2 [file exists tfa1/a/b/c] + set result [expr $r1 && !$r2] + file delete -force tfa1 tfa2 tfa3 + set result +} {1} + +test fCmd-18.15 {TclFileRenameCmd : rename a file to a symlink dir} {unixOnly} { + catch {file delete -force -- tfa1 tfa2 tfalink} + + file mkdir tfa1 + set s [createfile tfa2] + exec ln -s tfa1 tfalink + + file rename tfa2 tfalink + set result [checkcontent tfa1/tfa2 $s ] + file delete -force tfa1 tfalink + set result +} {1} + +test fCmd-18.16 {TclFileRenameCmd : rename a dangling symlink} {unixOnly} { + catch {file delete -force -- tfa1 tfalink} + + file mkdir tfa1 + exec ln -s tfa1 tfalink + file delete tfa1 + file rename tfalink tfa2 + set result [expr [string compare [file type tfa2] "link"] == 0] + file delete tfa2 + set result +} {1} + + +# +# Coverage tests for TclUnixRmdir +# +test fCmd-19.1 { remove empty directory } { + catch {file delete -force -- tfa} + file mkdir tfa + file delete tfa + file exists tfa +} {0} + +test fCmd-19.2 { rmdir error besides EEXIST} {unixOnly} { + catch {file delete -force -- tfa} + file mkdir tfa + file mkdir tfa/a + exec chmod 555 tfa + set result [catch {file delete tfa/a}] + exec chmod 777 tfa + file delete -force tfa + set result +} {1} + +test fCmd-19.3 { recursive remove } { + catch {file delete -force -- tfa} + file mkdir tfa + file mkdir tfa/a + file delete -force tfa + file exists tfa +} {0} + +# +# TclUnixDeleteFile and TraversalDelete are covered by tests from the +# TclDeleteFilesCmd suite +# +# + +# +# Coverage tests for TraverseUnixTree(), called from TclDeleteFilesCmd +# + +test fCmd-20.1 {TraverseUnixTree : failure opening a subdirectory directory } {unixOnly} { + catch {file delete -force -- tfa} + file mkdir tfa + file mkdir tfa/a + exec chmod 000 tfa/a + set result [catch {file delete -force tfa}] + exec chmod 777 tfa/a + file delete -force tfa + set result +} {1} + + +# +# Feature testing for TclCopyFilesCmd +# +test fCmd-21.1 {copy : single file to nonexistant } { + catch {file delete -force -- tfa1 tfa2} + set s [createfile tfa1] + file copy tfa1 tfa2 + set result [expr [checkcontent tfa2 $s] && [checkcontent tfa1 $s]] + file delete tfa1 tfa2 + set result +} {1} + +test fCmd-21.2 {copy : single dir to nonexistant } { + catch {file delete -force -- tfa1 tfa2} + file mkdir tfa1 + file copy tfa1 tfa2 + set result [expr [file isdir tfa2] && [file isdir tfa1]] + file delete tfa1 tfa2 + set result +} {1} + +test fCmd-21.3 {copy : single file into directory } { + catch {file delete -force -- tfa1 tfad} + set s [createfile tfa1] + file mkdir tfad + file copy tfa1 tfad + set result [expr [checkcontent tfad/tfa1 $s] && [checkcontent tfa1 $s]] + file delete -force tfa1 tfad + set result +} {1} + +test fCmd-21.4 {copy : more than one source and target is not a directory} { + catch {file delete -force -- tfa1 tfa2 tfa3} + createfile tfa1 + createfile tfa2 + createfile tfa3 + set result [catch {file copy tfa1 tfa2 tfa3}] + file delete tfa1 tfa2 tfa3 + set result +} {1} + +test fCmd-21.5 {copy : multiple files into directory } { + catch {file delete -force -- tfa1 tfa2 tfad} + set s1 [createfile tfa1 ] + set s2 [createfile tfa2 ] + file mkdir tfad + file copy tfa1 tfa2 tfad + set r1 [checkcontent tfad/tfa1 $s1] + set r2 [checkcontent tfad/tfa2 $s2] + set r3 [checkcontent tfa1 $s1] + set r4 [checkcontent tfa2 $s2] + set result [expr $r1 && $r2 && $r3 && $r4] + file delete -force tfa1 tfa2 tfad + set result +} {1} + +test fCmd-21.6 {copy : mixed dirs and files into directory } {notFileSharing} { + catch {file delete -force -- tfa1 tfad1 tfad2} + set s [createfile tfa1 ] + file mkdir tfad1 tfad2 + file copy tfa1 tfad1 tfad2 + set r1 [checkcontent [file join tfad2 tfa1] $s] + set r2 [file isdir [file join tfad2 tfad1]] + set r3 [checkcontent tfa1 $s] + set result [expr $r1 && $r2 && $r3 && [file isdir tfad1]] + file delete -force tfa1 tfad1 tfad2 + set result +} {1} + +test fCmd-21.7 {TclCopyFilesCmd : copy a dangling link } {unixOnly} { + file mkdir tfad1 + exec ln -s tfad1 tfalink + file delete tfad1 + file copy tfalink tfalink2 + set result [string match [file type tfalink2] link] + file delete tfalink tfalink2 + set result +} {1} + +test fCmd-21.8 {TclCopyFilesCmd : copy a link } {unixOnly} { + file mkdir tfad1 + exec ln -s tfad1 tfalink + file copy tfalink tfalink2 + set r1 [file type tfalink] + set r2 [file type tfalink2] + set r3 [file isdir tfad1] + set result [expr {("$r1" == "link" ) && ("$r2" == "link" ) && $r3}] + file delete tfad1 tfalink tfalink2 + set result +} {1} + +test fCmd-21.9 {TclCopyFilesCmd : copy dir with a link in it } {unixOnly} { + file mkdir tfad1 + exec ln -s "[pwd]/tfad1" tfad1/tfalink + file copy tfad1 tfad2 + set result [string match [file type tfad2/tfalink] link] + file delete -force tfad1 tfad2 + set result +} {1} + +test fCmd-21.10 {TclFileCopyCmd: copy dir on top of another empty dir w/o -force} { + catch {file delete -force -- tfa tfad} + file mkdir tfa [file join tfad tfa] + set r1 [catch {file copy tfa tfad}] + set result [expr $r1 && [file isdir tfa]] + file delete -force tfa tfad + set result +} {1} + +test fCmd-21.11 {TclFileCopyCmd: copy dir on top of a dir w/o -force} { + catch {file delete -force -- tfa tfad} + file mkdir tfa [file join tfad tfa file] + set r1 [catch {file copy tfa tfad}] + set result [expr $r1 && [file isdir tfa] && [file isdir [file join tfad tfa file]]] + file delete -force tfa tfad + set result +} {1} + +test fCmd-21.12 {TclFileCopyCmd: copy dir on top of a non-empty dir w/ -force} { + catch {file delete -force -- tfa tfad} + file mkdir tfa [file join tfad tfa file] + set r1 [catch {file copy -force tfa tfad}] + set result [expr $r1 && [file isdir tfa] && [file isdir [file join tfad tfa file]]] + file delete -force tfa tfad + set result +} {1} + +# +# Coverage testing for TclpRenameFile +# +test fCmd-22.1 { TclpRenameFile : rename and overwrite in a single dir } { + catch {file delete -force -- tfa1 tfa2} + set s [createfile tfa1] + set s2 [createfile tfa2 q] + + set r1 [catch {rename tfa1 tfa2}] + file rename -force tfa1 tfa2 + set result [expr $r1 && [checkcontent tfa2 $s]] + file delete [glob tfa1 tfa2] + set result +} {1} + +test fCmd-22.2 { TclpRenameFile : attempt to overwrite itself } {macOrUnix} { + catch {file delete -force -- tfa1} + set s [createfile tfa1] + file rename -force tfa1 tfa1 + set result [checkcontent tfa1 $s] + file delete tfa1 + set result +} {1} + +test fCmd-22.3 { TclpRenameFile : rename dir to existing dir } { + catch {file delete -force -- d1 tfad} + file mkdir d1 [file join tfad d1] + set r1 [catch {file rename d1 tfad}] + set result [expr $r1 && [file isdir d1] && [file isdir [file join tfad d1]]] + file delete -force d1 tfad + set result +} {1} + +test fCmd-22.4 { TclpRenameFile : rename dir to dir several levels deep } { + catch {file delete -force -- d1 tfad} + file mkdir d1 [file join tfad a b c] + file rename d1 [file join tfad a b c d1] + set result [expr ![file isdir d1] && [file isdir [file join tfad a b c d1]]] + file delete -force [glob d1 tfad] + set result +} {1} + + +# +# TclMacCopyFile needs to be redone. +# +test fCmd-22.5 { TclMacCopyFile : copy and overwrite in a single dir } { + catch {file delete -force -- tfa1 tfa2} + set s [createfile tfa1] + set s2 [createfile tfa2 q] + + set r1 [catch {file copy tfa1 tfa2}] + file copy -force tfa1 tfa2 + set result [expr $r1 && [checkcontent tfa2 $s] && [checkcontent tfa1 $s]] + file delete tfa1 tfa2 + set result +} {1} + +# +# TclMacMkdir - basic cases are covered elsewhere. +# Error cases are not covered. +# + +# +# TclMacRmdir +# Error cases are not covered. +# + +test fCmd-23.1 { TclMacRmdir : trying to remove a nonempty directory } { + catch {file delete -force -- tfad} + + file mkdir [file join tfad dir] + + set result [catch {file delete tfad}] + file delete -force tfad + set result +} {1} + +# +# TclMacDeleteFile +# Error cases are not covered. +# +test fCmd-24.1 { TclMacDeleteFile : deleting a normal file } { + catch {file delete -force -- tfa1} + + createfile tfa1 + file delete tfa1 + file exists tfa1 +} {0} + +# +# TclMacCopyDirectory +# Error cases are not covered. +# +test fCmd-25.1 { TclMacCopyDirectory : copying a normal directory} {notFileSharing} { + catch {file delete -force -- tfad1 tfad2} + + file mkdir [file join tfad1 a b c] + file copy tfad1 tfad2 + set result [expr [file isdir [file join tfad1 a b c]] && [file isdir [file join tfad2 a b c]]] + file delete -force tfad1 tfad2 + set result +} {1} + +test fCmd-25.2 { TclMacCopyDirectory : copying a short path normal directory} {notFileSharing} { + catch {file delete -force -- tfad1 tfad2} + + file mkdir tfad1 + file copy tfad1 tfad2 + set result [expr [file isdir tfad1] && [file isdir tfad2]] + file delete tfad1 tfad2 + set result +} {1} + +test fCmd-25.3 { TclMacCopyDirectory : copying dirs between different dirs} {notFileSharing} { + catch {file delete -force -- tfad1 tfad2} + + file mkdir [file join tfad1 x y z] + file mkdir [file join tfad2 dir] + file copy tfad1 [file join tfad2 dir] + set result [expr [file isdir [file join tfad1 x y z]] && [file isdir [file join tfad2 dir tfad1 x y z]]] + file delete -force tfad1 tfad2 + set result +} {1} + +# +# Functionality tests for TclDeleteFilesCmd +# + +test fCmd-26.1 { TclDeleteFilesCmd : delete symlink} {unixOnly} { + catch {file delete -force -- tfad1 tfad2} + + file mkdir tfad1 + exec ln -s tfad1 tfalink + file delete tfalink + + set r1 [file isdir tfad1] + set r2 [file exists tfalink] + + set result [expr $r1 && !$r2] + file delete tfad1 + set result +} {1} + +test fCmd-26.2 { TclDeleteFilesCmd : delete dir with symlink} {unixOnly} { + catch {file delete -force -- tfad1 tfad2} + + file mkdir tfad1 + file mkdir tfad2 + exec ln -s tfad1 [file join tfad2 link] + file delete -force tfad2 + + set r1 [file isdir tfad1] + set r2 [file exists tfad2] + + set result [expr $r1 && !$r2] + file delete tfad1 + set result +} {1} + +test fCmd-26.3 { TclDeleteFilesCmd : delete dangling symlink} {unixOnly} { + catch {file delete -force -- tfad1 tfad2} + + file mkdir tfad1 + exec ln -s tfad1 tfad2 + file delete tfad1 + file delete tfad2 + + set r1 [file exists tfad1] + set r2 [file exists tfad2] + + set result [expr !$r1 && !$r2] + set result +} {1} + +test fCmd-27.1 {TclFileAttrsCmd - wrong # args} { + list [catch {file attributes a b c d} msg] $msg +} {1 {wrong # args: must be "file attributes name ?option? ?value? ?option value? ..."}} +test fCmd-27.2 {TclFileAttrsCmd - Tcl_TranslateFileName fails} { + testsetplatform unix + list [catch {file attributes ~_bad_user} msg] $msg [testsetplatform $platform] +} {1 {user "_bad_user" doesn't exist} {}} +test fCmd-27.3 {TclFileAttrsCmd - all attributes} { + catch {file delete -force -- foo.tmp} + createfile foo.tmp + list [catch {file attributes foo.tmp} msg] [expr {[llength $msg] > 0}] [file delete -force -- foo.tmp] +} {0 1 {}} +test fCmd-27.4 {TclFileAttrsCmd - getting one option} { + catch {file delete -force -- foo.tmp} + createfile foo.tmp + set attrs [file attributes foo.tmp] + list [catch {eval file attributes foo.tmp [lindex $attrs 0]}] [file delete -force -- foo.tmp] +} {0 {}} + +set testConfig(tclGroup) 0 +if {($tcl_platform(platform) == "macintosh") \ + || ($tcl_platform(platform) == "windows")} { + set testConfig(tclGroup) 1 +} elseif {[catch {exec {groups}} groupList] == 0} { + if {[lsearch $groupList tcl] != -1} { + set testConfig(tclGroup) 1 + } +} + +test fCmd-27.5 {TclFileAttrsCmd - setting one option} {tclGroup} { + catch {file delete -force -- foo.tmp} + createfile foo.tmp + set attrs [file attributes foo.tmp] + list [catch {eval file attributes foo.tmp [lrange $attrs 0 1]} msg] $msg [file delete -force -- foo.tmp] +} {0 {} {}} +test fCmd-27.6 {TclFileAttrsCmd - setting more than one option} {tclGroup} { + catch {file delete -force -- foo.tmp} + createfile foo.tmp + set attrs [file attributes foo.tmp] + list [catch {eval file attributes foo.tmp [lrange $attrs 0 3]} msg] $msg [file delete -force -- foo.tmp] +} {0 {} {}} + +cleanup diff --git a/tests/fileName.test b/tests/fileName.test new file mode 100644 index 0000000..e0f7260 --- /dev/null +++ b/tests/fileName.test @@ -0,0 +1,1449 @@ +# This file tests the filename manipulation routines. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) fileName.test 1.31 97/08/19 18:45:07 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {[info commands testsetplatform] == {}} { + puts "This application hasn't been compiled with the \"testsetplatform\"" + puts "command, so I can't test the filename conversion procedures." + return +} + +global env +set platform [testgetplatform] + +test filename-1.1 {Tcl_GetPathType: unix} { + testsetplatform unix + file pathtype / +} absolute +test filename-1.2 {Tcl_GetPathType: unix} { + testsetplatform unix + file pathtype /foo +} absolute +test filename-1.3 {Tcl_GetPathType: unix} { + testsetplatform unix + file pathtype foo +} relative +test filename-1.4 {Tcl_GetPathType: unix} { + testsetplatform unix + file pathtype c:/foo +} relative +test filename-1.5 {Tcl_GetPathType: unix} { + testsetplatform unix + file pathtype ~ +} absolute +test filename-1.6 {Tcl_GetPathType: unix} { + testsetplatform unix + file pathtype ~/foo +} absolute +test filename-1.7 {Tcl_GetPathType: unix} { + testsetplatform unix + file pathtype ~foo +} absolute +test filename-1.8 {Tcl_GetPathType: unix} { + testsetplatform unix + file pathtype ./~foo +} relative + +test filename-2.1 {Tcl_GetPathType: mac, denerate names} { + testsetplatform mac + file pathtype / +} relative +test filename-2.2 {Tcl_GetPathType: mac, denerate names} { + testsetplatform mac + file pathtype /. +} relative +test filename-2.3 {Tcl_GetPathType: mac, denerate names} { + testsetplatform mac + file pathtype /.. +} relative +test filename-2.4 {Tcl_GetPathType: mac, denerate names} { + testsetplatform mac + file pathtype //.// +} relative +test filename-2.5 {Tcl_GetPathType: mac, denerate names} { + testsetplatform mac + file pathtype //.//../. +} relative +test filename-2.6 {Tcl_GetPathType: mac, tilde names} { + testsetplatform mac + file pathtype ~ +} absolute +test filename-2.7 {Tcl_GetPathType: mac, tilde names} { + testsetplatform mac + file pathtype ~: +} absolute +test filename-2.8 {Tcl_GetPathType: mac, tilde names} { + testsetplatform mac + file pathtype ~:foo +} absolute +test filename-2.9 {Tcl_GetPathType: mac, tilde names} { + testsetplatform mac + file pathtype ~/ +} absolute +test filename-2.10 {Tcl_GetPathType: mac, tilde names} { + testsetplatform mac + file pathtype ~/foo +} absolute +test filename-2.11 {Tcl_GetPathType: mac, unix-style names} { + testsetplatform mac + file pathtype /foo +} absolute +test filename-2.12 {Tcl_GetPathType: mac, unix-style names} { + testsetplatform mac + file pathtype /./foo +} absolute +test filename-2.13 {Tcl_GetPathType: mac, unix-style names} { + testsetplatform mac + file pathtype /..//./foo +} absolute +test filename-2.14 {Tcl_GetPathType: mac, unix-style names} { + testsetplatform mac + file pathtype /foo/bar +} absolute +test filename-2.15 {Tcl_GetPathType: mac, unix-style names} { + testsetplatform mac + file pathtype foo/bar +} relative +test filename-2.16 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype : +} relative +test filename-2.17 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype :foo +} relative +test filename-2.18 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype foo: +} absolute +test filename-2.19 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype foo:bar +} absolute +test filename-2.20 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype :foo:bar +} relative +test filename-2.21 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype ::foo:bar +} relative +test filename-2.22 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype ~foo +} absolute +test filename-2.23 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype :~foo +} relative +test filename-2.24 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype ~foo: +} absolute +test filename-2.25 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype foo/bar: +} absolute +test filename-2.26 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype /foo: +} absolute +test filename-2.27 {Tcl_GetPathType: mac, mac-style names} { + testsetplatform mac + file pathtype foo +} relative + +test filename-3.1 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype / +} volumerelative +test filename-3.2 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype \\ +} volumerelative +test filename-3.3 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype /foo +} volumerelative +test filename-3.4 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype \\foo +} volumerelative +test filename-3.5 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype c:/ +} absolute +test filename-3.6 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype c:\\ +} absolute +test filename-3.7 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype c:/foo +} absolute +test filename-3.8 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype c:\\foo +} absolute +test filename-3.9 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype c: +} volumerelative +test filename-3.10 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype c:foo +} volumerelative +test filename-3.11 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype foo +} relative +test filename-3.12 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype //foo/bar +} absolute +test filename-3.13 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype ~foo +} absolute +test filename-3.14 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype ~ +} absolute +test filename-3.15 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype ~/foo +} absolute +test filename-3.16 {Tcl_GetPathType: windows} { + testsetplatform windows + file pathtype ./~foo +} relative + +test filename-4.1 {Tcl_SplitPath: unix} { + testsetplatform unix + file split / +} {/} +test filename-4.2 {Tcl_SplitPath: unix} { + testsetplatform unix + file split /foo +} {/ foo} +test filename-4.3 {Tcl_SplitPath: unix} { + testsetplatform unix + file split /foo/bar +} {/ foo bar} +test filename-4.4 {Tcl_SplitPath: unix} { + testsetplatform unix + file split /foo/bar/baz +} {/ foo bar baz} +test filename-4.5 {Tcl_SplitPath: unix} { + testsetplatform unix + file split foo/bar +} {foo bar} +test filename-4.6 {Tcl_SplitPath: unix} { + testsetplatform unix + file split ./foo/bar +} {. foo bar} +test filename-4.7 {Tcl_SplitPath: unix} { + testsetplatform unix + file split /foo/../././foo/bar +} {/ foo .. . . foo bar} +test filename-4.8 {Tcl_SplitPath: unix} { + testsetplatform unix + file split ../foo/bar +} {.. foo bar} +test filename-4.9 {Tcl_SplitPath: unix} { + testsetplatform unix + file split {} +} {} +test filename-4.10 {Tcl_SplitPath: unix} { + testsetplatform unix + file split . +} {.} +test filename-4.11 {Tcl_SplitPath: unix} { + testsetplatform unix + file split ../ +} {..} +test filename-4.12 {Tcl_SplitPath: unix} { + testsetplatform unix + file split ../.. +} {.. ..} +test filename-4.13 {Tcl_SplitPath: unix} { + testsetplatform unix + file split //foo +} {/ foo} +test filename-4.14 {Tcl_SplitPath: unix} { + testsetplatform unix + file split foo//bar +} {foo bar} +test filename-4.15 {Tcl_SplitPath: unix} { + testsetplatform unix + file split ~foo +} {~foo} +test filename-4.16 {Tcl_SplitPath: unix} { + testsetplatform unix + file split ~foo/~bar +} {~foo ./~bar} +test filename-4.17 {Tcl_SplitPath: unix} { + testsetplatform unix + file split ~foo/~bar/~baz +} {~foo ./~bar ./~baz} +test filename-4.18 {Tcl_SplitPath: unix} { + testsetplatform unix + file split foo/bar~/baz +} {foo bar~ baz} + +test filename-5.1 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a:b +} {a: b} +test filename-5.2 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a:b:c +} {a: b c} +test filename-5.3 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a:b:c: +} {a: b c} +test filename-5.4 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a: +} {a:} +test filename-5.5 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a:: +} {a: ::} +test filename-5.6 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a::: +} {a: :: ::} +test filename-5.7 {Tcl_SplitPath: mac} { + testsetplatform mac + file split :a +} {a} +test filename-5.8 {Tcl_SplitPath: mac} { + testsetplatform mac + file split :a:: +} {a ::} +test filename-5.9 {Tcl_SplitPath: mac} { + testsetplatform mac + file split : +} {:} +test filename-5.10 {Tcl_SplitPath: mac} { + testsetplatform mac + file split :: +} {::} +test filename-5.11 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ::: +} {:: ::} +test filename-5.12 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a:::b +} {a: :: :: b} +test filename-5.13 {Tcl_SplitPath: mac} { + testsetplatform mac + file split /a:b +} {/a: b} +test filename-5.14 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~: +} {~:} +test filename-5.15 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~/: +} {~/:} +test filename-5.16 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~:foo +} {~: foo} +test filename-5.17 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~/foo +} {~: foo} +test filename-5.18 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~foo: +} {~foo:} +test filename-5.19 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a:~foo +} {a: :~foo} +test filename-5.20 {Tcl_SplitPath: mac} { + testsetplatform mac + file split / +} {:/} +test filename-5.21 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a:b/c +} {a: :b/c} +test filename-5.22 {Tcl_SplitPath: mac} { + testsetplatform mac + file split /foo +} {foo:} +test filename-5.23 {Tcl_SplitPath: mac} { + testsetplatform mac + file split /a/b +} {a: b} +test filename-5.24 {Tcl_SplitPath: mac} { + testsetplatform mac + file split /a/b/foo +} {a: b foo} +test filename-5.25 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a/b +} {a b} +test filename-5.26 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ./foo/bar +} {: foo bar} +test filename-5.27 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ../foo/bar +} {:: foo bar} +test filename-5.28 {Tcl_SplitPath: mac} { + testsetplatform mac + file split {} +} {} +test filename-5.29 {Tcl_SplitPath: mac} { + testsetplatform mac + file split . +} {:} +test filename-5.30 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ././ +} {: :} +test filename-5.31 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ././. +} {: : :} +test filename-5.32 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ../ +} {::} +test filename-5.33 {Tcl_SplitPath: mac} { + testsetplatform mac + file split .. +} {::} +test filename-5.34 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ../.. +} {:: ::} +test filename-5.35 {Tcl_SplitPath: mac} { + testsetplatform mac + file split //foo +} {foo:} +test filename-5.36 {Tcl_SplitPath: mac} { + testsetplatform mac + file split foo//bar +} {foo bar} +test filename-5.37 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~foo +} {~foo:} +test filename-5.38 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~ +} {~:} +test filename-5.39 {Tcl_SplitPath: mac} { + testsetplatform mac + file split foo +} {foo} +test filename-5.40 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~/ +} {~:} +test filename-5.41 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~foo/~bar +} {~foo: :~bar} +test filename-5.42 {Tcl_SplitPath: mac} { + testsetplatform mac + file split ~foo/~bar/~baz +} {~foo: :~bar :~baz} +test filename-5.43 {Tcl_SplitPath: mac} { + testsetplatform mac + file split foo/bar~/baz +} {foo bar~ baz} +test filename-5.44 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a/../b +} {a :: b} +test filename-5.45 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a/../../b +} {a :: :: b} +test filename-5.46 {Tcl_SplitPath: mac} { + testsetplatform mac + file split a/.././../b +} {a :: : :: b} +test filename-5.47 {Tcl_SplitPath: mac} { + testsetplatform mac + file split /../bar +} {bar:} +test filename-5.48 {Tcl_SplitPath: mac} { + testsetplatform mac + file split /./bar +} {bar:} +test filename-5.49 {Tcl_SplitPath: mac} { + testsetplatform mac + file split //.//.././bar +} {bar:} +test filename-5.50 {Tcl_SplitPath: mac} { + testsetplatform mac + file split /.. +} {:/..} +test filename-5.51 {Tcl_SplitPath: mac} { + testsetplatform mac + file split //.//.././ +} {://.//.././} + +test filename-6.1 {Tcl_SplitPath: win} { + testsetplatform win + file split / +} {/} +test filename-6.2 {Tcl_SplitPath: win} { + testsetplatform win + file split /foo +} {/ foo} +test filename-6.3 {Tcl_SplitPath: win} { + testsetplatform win + file split /foo/bar +} {/ foo bar} +test filename-6.4 {Tcl_SplitPath: win} { + testsetplatform win + file split /foo/bar/baz +} {/ foo bar baz} +test filename-6.5 {Tcl_SplitPath: win} { + testsetplatform win + file split foo/bar +} {foo bar} +test filename-6.6 {Tcl_SplitPath: win} { + testsetplatform win + file split ./foo/bar +} {. foo bar} +test filename-6.7 {Tcl_SplitPath: win} { + testsetplatform win + file split /foo/../././foo/bar +} {/ foo .. . . foo bar} +test filename-6.8 {Tcl_SplitPath: win} { + testsetplatform win + file split ../foo/bar +} {.. foo bar} +test filename-6.9 {Tcl_SplitPath: win} { + testsetplatform win + file split {} +} {} +test filename-6.10 {Tcl_SplitPath: win} { + testsetplatform win + file split . +} {.} +test filename-6.11 {Tcl_SplitPath: win} { + testsetplatform win + file split ../ +} {..} +test filename-6.12 {Tcl_SplitPath: win} { + testsetplatform win + file split ../.. +} {.. ..} +test filename-6.13 {Tcl_SplitPath: win} { + testsetplatform win + file split //foo +} {/ foo} +test filename-6.14 {Tcl_SplitPath: win} { + testsetplatform win + file split foo//bar +} {foo bar} +test filename-6.15 {Tcl_SplitPath: win} { + testsetplatform win + file split /\\/foo//bar +} {//foo/bar} +test filename-6.16 {Tcl_SplitPath: win} { + testsetplatform win + file split /\\/foo//bar +} {//foo/bar} +test filename-6.17 {Tcl_SplitPath: win} { + testsetplatform win + file split /\\/foo//bar +} {//foo/bar} +test filename-6.18 {Tcl_SplitPath: win} { + testsetplatform win + file split \\\\foo\\bar +} {//foo/bar} +test filename-6.19 {Tcl_SplitPath: win} { + testsetplatform win + file split \\\\foo\\bar/baz +} {//foo/bar baz} +test filename-6.20 {Tcl_SplitPath: win} { + testsetplatform win + file split c:/foo +} {c:/ foo} +test filename-6.21 {Tcl_SplitPath: win} { + testsetplatform win + file split c:foo +} {c: foo} +test filename-6.22 {Tcl_SplitPath: win} { + testsetplatform win + file split c: +} {c:} +test filename-6.23 {Tcl_SplitPath: win} { + testsetplatform win + file split c:\\ +} {c:/} +test filename-6.24 {Tcl_SplitPath: win} { + testsetplatform win + file split c:/ +} {c:/} +test filename-6.25 {Tcl_SplitPath: win} { + testsetplatform win + file split c:/./.. +} {c:/ . ..} +test filename-6.26 {Tcl_SplitPath: win} { + testsetplatform win + file split ~foo +} {~foo} +test filename-6.27 {Tcl_SplitPath: win} { + testsetplatform win + file split ~foo/~bar +} {~foo ./~bar} +test filename-6.28 {Tcl_SplitPath: win} { + testsetplatform win + file split ~foo/~bar/~baz +} {~foo ./~bar ./~baz} +test filename-6.29 {Tcl_SplitPath: win} { + testsetplatform win + file split foo/bar~/baz +} {foo bar~ baz} +test filename-6.30 {Tcl_SplitPath: win} { + testsetplatform win + file split c:~foo +} {c: ./~foo} + +test filename-7.1 {Tcl_JoinPath: unix} { + testsetplatform unix + file join / a +} {/a} +test filename-7.2 {Tcl_JoinPath: unix} { + testsetplatform unix + file join a b +} {a/b} +test filename-7.3 {Tcl_JoinPath: unix} { + testsetplatform unix + file join /a c /b d +} {/b/d} +test filename-7.4 {Tcl_JoinPath: unix} { + testsetplatform unix + file join / +} {/} +test filename-7.5 {Tcl_JoinPath: unix} { + testsetplatform unix + file join a +} {a} +test filename-7.6 {Tcl_JoinPath: unix} { + testsetplatform unix + file join {} +} {} +test filename-7.7 {Tcl_JoinPath: unix} { + testsetplatform unix + file join /a/ b +} {/a/b} +test filename-7.8 {Tcl_JoinPath: unix} { + testsetplatform unix + file join /a// b +} {/a/b} +test filename-7.9 {Tcl_JoinPath: unix} { + testsetplatform unix + file join /a/./../. b +} {/a/./.././b} +test filename-7.10 {Tcl_JoinPath: unix} { + testsetplatform unix + file join ~ a +} {~/a} +test filename-7.11 {Tcl_JoinPath: unix} { + testsetplatform unix + file join ~a ~b +} {~b} +test filename-7.12 {Tcl_JoinPath: unix} { + testsetplatform unix + file join ./~a b +} {./~a/b} +test filename-7.13 {Tcl_JoinPath: unix} { + testsetplatform unix + file join ./~a ~b +} {~b} +test filename-7.14 {Tcl_JoinPath: unix} { + testsetplatform unix + file join ./~a ./~b +} {./~a/~b} +test filename-7.15 {Tcl_JoinPath: unix} { + testsetplatform unix + file join a . b +} {a/./b} +test filename-7.16 {Tcl_JoinPath: unix} { + testsetplatform unix + file join a . ./~b +} {a/./~b} +test filename-7.17 {Tcl_JoinPath: unix} { + testsetplatform unix + file join //a b +} {/a/b} +test filename-7.18 {Tcl_JoinPath: unix} { + testsetplatform unix + file join /// a b +} {/a/b} + +test filename-8.1 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a b +} {:a:b} +test filename-8.2 {Tcl_JoinPath: mac} { + testsetplatform mac + file join :a b +} {:a:b} +test filename-8.3 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a b: +} {b:} +test filename-8.4 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a: :b +} {a:b} +test filename-8.5 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a: :b: +} {a:b} +test filename-8.6 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a :: b +} {:a::b} +test filename-8.7 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a :: :: b +} {:a:::b} +test filename-8.8 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a ::: b +} {:a:::b} +test filename-8.9 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a: b: +} {b:} +test filename-8.10 {Tcl_JoinPath: mac} { + testsetplatform mac + file join /a/b +} {a:b} +test filename-8.11 {Tcl_JoinPath: mac} { + testsetplatform mac + file join /a/b c/d +} {a:b:c:d} +test filename-8.12 {Tcl_JoinPath: mac} { + testsetplatform mac + file join /a/b :c:d +} {a:b:c:d} +test filename-8.13 {Tcl_JoinPath: mac} { + testsetplatform mac + file join ~ foo +} {~:foo} +test filename-8.14 {Tcl_JoinPath: mac} { + testsetplatform mac + file join :: :: +} {:::} +test filename-8.15 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a: :: +} {a::} +test filename-8.16 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a {} b +} {:a:b} +test filename-8.17 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a::: b +} {a:::b} +test filename-8.18 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a : : : +} {:a} +test filename-8.19 {Tcl_JoinPath: mac} { + testsetplatform mac + file join : +} {:} +test filename-8.20 {Tcl_JoinPath: mac} { + testsetplatform mac + file join : a +} {:a} +test filename-8.21 {Tcl_JoinPath: mac} { + testsetplatform mac + file join a: :b/c +} {a:b/c} +test filename-8.22 {Tcl_JoinPath: mac} { + testsetplatform mac + file join :a :b/c +} {:a:b/c} + +test filename-9.1 {Tcl_JoinPath: win} { + testsetplatform win + file join a b +} {a/b} +test filename-9.2 {Tcl_JoinPath: win} { + testsetplatform win + file join /a b +} {/a/b} +test filename-9.3 {Tcl_JoinPath: win} { + testsetplatform win + file join /a /b +} {/b} +test filename-9.4 {Tcl_JoinPath: win} { + testsetplatform win + file join c: foo +} {c:foo} +test filename-9.5 {Tcl_JoinPath: win} { + testsetplatform win + file join c:/ foo +} {c:/foo} +test filename-9.6 {Tcl_JoinPath: win} { + testsetplatform win + file join c:\\bar foo +} {c:/bar/foo} +test filename-9.7 {Tcl_JoinPath: win} { + testsetplatform win + file join /foo c:bar +} {c:bar} +test filename-9.8 {Tcl_JoinPath: win} { + testsetplatform win + file join ///host//share dir +} {//host/share/dir} +test filename-9.9 {Tcl_JoinPath: win} { + testsetplatform win + file join ~ foo +} {~/foo} +test filename-9.10 {Tcl_JoinPath: win} { + testsetplatform win + file join ~/~foo +} {~/~foo} +test filename-9.11 {Tcl_JoinPath: win} { + testsetplatform win + file join ~ ./~foo +} {~/~foo} +test filename-9.12 {Tcl_JoinPath: win} { + testsetplatform win + file join / ~foo +} {~foo} +test filename-9.13 {Tcl_JoinPath: win} { + testsetplatform win + file join ./a/ b c +} {./a/b/c} +test filename-9.14 {Tcl_JoinPath: win} { + testsetplatform win + file join ./~a/ b c +} {./~a/b/c} +test filename-9.15 {Tcl_JoinPath: win} { + testsetplatform win + file join // host share path +} {/host/share/path} +test filename-9.16 {Tcl_JoinPath: win} { + testsetplatform win + file join foo . bar +} {foo/./bar} +test filename-9.17 {Tcl_JoinPath: win} { + testsetplatform win + file join foo .. bar +} {foo/../bar} +test filename-9.18 {Tcl_JoinPath: win} { + testsetplatform win + file join foo/./bar +} {foo/./bar} + +test filename-10.1 {Tcl_TranslateFileName} { + testsetplatform unix + list [catch {testtranslatefilename foo} msg] $msg +} {0 foo} +test filename-10.2 {Tcl_TranslateFileName} { + testsetplatform windows + list [catch {testtranslatefilename {c:/foo}} msg] $msg +} {0 {c:\foo}} +test filename-10.3 {Tcl_TranslateFileName} { + testsetplatform windows + list [catch {testtranslatefilename {c:/\\foo/}} msg] $msg +} {0 {c:\foo}} +test filename-10.4 {Tcl_TranslateFileName} { + testsetplatform mac + list [catch {testtranslatefilename foo} msg] $msg +} {0 :foo} +test filename-10.5 {Tcl_TranslateFileName} { + testsetplatform mac + list [catch {testtranslatefilename :~foo} msg] $msg +} {0 :~foo} +test filename-10.6 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "/home/test" + testsetplatform unix + set result [list [catch {testtranslatefilename ~/foo} msg] $msg] + set env(HOME) $temp + set result +} {0 /home/test/foo} +test filename-10.7 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + unset env(HOME) + testsetplatform unix + set result [list [catch {testtranslatefilename ~/foo} msg] $msg] + set env(HOME) $temp + set result +} {1 {couldn't find HOME environment variable to expand path}} +test filename-10.8 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "/home/test" + testsetplatform unix + set result [list [catch {testtranslatefilename ~} msg] $msg] + set env(HOME) $temp + set result +} {0 /home/test} +test filename-10.9 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "/home/test/" + testsetplatform unix + set result [list [catch {testtranslatefilename ~} msg] $msg] + set env(HOME) $temp + set result +} {0 /home/test} +test filename-10.10 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "/home/test/" + testsetplatform unix + set result [list [catch {testtranslatefilename ~/foo} msg] $msg] + set env(HOME) $temp + set result +} {0 /home/test/foo} +test filename-10.11 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "Root:" + testsetplatform mac + set result [list [catch {testtranslatefilename ~/foo} msg] $msg] + set env(HOME) $temp + set result +} {0 Root:foo} +test filename-10.12 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "Root:home" + testsetplatform mac + set result [list [catch {testtranslatefilename ~/foo} msg] $msg] + set env(HOME) $temp + set result +} {0 Root:home:foo} +test filename-10.13 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "Root:home" + testsetplatform mac + set result [list [catch {testtranslatefilename ~::foo} msg] $msg] + set env(HOME) $temp + set result +} {0 Root:home::foo} +test filename-10.14 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "Root:home" + testsetplatform mac + set result [list [catch {testtranslatefilename ~} msg] $msg] + set env(HOME) $temp + set result +} {0 Root:home} +test filename-10.15 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "Root:home:" + testsetplatform mac + set result [list [catch {testtranslatefilename ~::foo} msg] $msg] + set env(HOME) $temp + set result +} {0 Root:home::foo} +test filename-10.16 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "Root:home::" + testsetplatform mac + set result [list [catch {testtranslatefilename ~::foo} msg] $msg] + set env(HOME) $temp + set result +} {0 Root:home:::foo} +test filename-10.17 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "\\home\\" + testsetplatform windows + set result [list [catch {testtranslatefilename ~/foo} msg] $msg] + set env(HOME) $temp + set result +} {0 {\home\foo}} +test filename-10.18 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "\\home\\" + testsetplatform windows + set result [list [catch {testtranslatefilename ~/foo\\bar} msg] $msg] + set env(HOME) $temp + set result +} {0 {\home\foo\bar}} +test filename-10.19 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "c:" + testsetplatform windows + set result [list [catch {testtranslatefilename ~/foo} msg] $msg] + set env(HOME) $temp + set result +} {0 c:foo} +test filename-10.20 {Tcl_TranslateFileName} { + list [catch {testtranslatefilename ~blorp/foo} msg] $msg +} {1 {user "blorp" doesn't exist}} +test filename-10.21 {Tcl_TranslateFileName} { + global env + set temp $env(HOME) + set env(HOME) "c:\\" + testsetplatform windows + set result [list [catch {testtranslatefilename ~/foo} msg] $msg] + set env(HOME) $temp + set result +} {0 {c:\foo}} +test filename-10.22 {Tcl_TranslateFileName} { + testsetplatform windows + list [catch {testtranslatefilename foo//bar} msg] $msg +} {0 {foo\bar}} + +testsetplatform $platform + +test filename-10.23 {Tcl_TranslateFileName} {nonPortable unixOnly} { + # this test fails if ~ouster is not /home/ouster + list [catch {testtranslatefilename ~ouster} msg] $msg +} {0 /home/ouster} +test filename-10.24 {Tcl_TranslateFileName} {nonPortable unixOnly} { + # this test fails if ~ouster is not /home/ouster + list [catch {testtranslatefilename ~ouster/foo} msg] $msg +} {0 /home/ouster/foo} + + +test filename-11.1 {Tcl_GlobCmd} { + list [catch {glob} msg] $msg +} {1 {wrong # args: should be "glob ?switches? name ?name ...?"}} +test filename-11.2 {Tcl_GlobCmd} { + list [catch {glob -gorp} msg] $msg +} {1 {bad switch "-gorp": must be -nocomplain or --}} +test filename-11.3 {Tcl_GlobCmd} { + list [catch {glob -nocomplai} msg] $msg +} {1 {bad switch "-nocomplai": must be -nocomplain or --}} +test filename-11.4 {Tcl_GlobCmd} { + list [catch {glob -nocomplain} msg] $msg +} {1 {wrong # args: should be "glob ?switches? name ?name ...?"}} +test filename-11.5 {Tcl_GlobCmd} { + list [catch {glob -nocomplain ~xyqrszzz} msg] $msg +} {0 {}} +test filename-11.6 {Tcl_GlobCmd} { + list [catch {glob ~xyqrszzz} msg] $msg +} {1 {user "xyqrszzz" doesn't exist}} +test filename-11.7 {Tcl_GlobCmd} { + list [catch {glob -- -nocomplain} msg] $msg +} {1 {no files matched glob patterns "-nocomplain"}} +test filename-11.8 {Tcl_GlobCmd} { + list [catch {glob -nocomplain -- -nocomplain} msg] $msg +} {0 {}} +test filename-11.9 {Tcl_GlobCmd} { + testsetplatform unix + list [catch {glob ~\\xyqrszzz/bar} msg] $msg +} {1 {globbing characters not supported in user names}} +test filename-11.10 {Tcl_GlobCmd} { + testsetplatform unix + list [catch {glob -nocomplain ~\\xyqrszzz/bar} msg] $msg +} {0 {}} +test filename-11.11 {Tcl_GlobCmd} { + testsetplatform unix + list [catch {glob ~xyqrszzz\\/\\bar} msg] $msg +} {1 {user "xyqrszzz" doesn't exist}} +test filename-11.12 {Tcl_GlobCmd} { + testsetplatform unix + set home $env(HOME) + unset env(HOME) + set x [list [catch {glob ~/*} msg] $msg] + set env(HOME) $home + set x +} {1 {couldn't find HOME environment variable to expand path}} + +testsetplatform $platform + +test filename-11.13 {Tcl_GlobCmd} { + list [catch {file join [lindex [glob ~] 0]} msg] $msg +} [list 0 [file join $env(HOME)]] + +set oldhome $env(HOME) +set env(HOME) [pwd] +file delete -force globTest +file mkdir globTest/a1/b1 +file mkdir globTest/a1/b2 +file mkdir globTest/a2/b3 +file mkdir globTest/a3 +close [open globTest/x1.c w] +close [open globTest/y1.c w] +close [open globTest/z1.c w] +close [open "globTest/weird name.c" w] +close [open globTest/a1/b1/x2.c w] +close [open globTest/a1/b2/y2.c w] + +# Cannot create a file with the following names under Win32s. We have to +# skip the tests that are checking the difference between a "." or "," in +# the file name vs. a "." or "," in the glob pattern. + +catch {close [open globTest/.1 w]} +catch {close [open globTest/x,z1.c w]} + +test filename-11.14 {Tcl_GlobCmd} { + list [catch {glob ~/globTest} msg] $msg +} [list 0 [list [file join $env(HOME) globTest]]] +test filename-11.15 {Tcl_GlobCmd} { + list [catch {glob ~\\/globTest} msg] $msg +} [list 0 [list [file join $env(HOME) globTest]]] +test filename-11.16 {Tcl_GlobCmd} { + list [catch {glob globTest} msg] $msg +} {0 globTest} + +test filename-12.1 {simple globbing} {unixOrPc} { + list [catch {glob {}} msg] $msg +} {0 .} +test filename-12.2 {simple globbing} {macOnly} { + list [catch {glob {}} msg] $msg +} {0 :} +test filename-12.3 {simple globbing} { + list [catch {glob -nocomplain \{a1,a2\}} msg] $msg +} {0 {}} + +if {$tcl_platform(platform) == "macintosh"} { + set globPreResult :globTest: +} else { + set globPreResult globTest/ +} +set x1 x1.c +set y1 y1.c +test filename-12.4 {simple globbing} {unixOrPc} { + lsort [glob globTest/x1.c globTest/y1.c globTest/foo] +} "$globPreResult$x1 $globPreResult$y1" +test filename-12.5 {simple globbing} { + list [catch {glob globTest\\/x1.c} msg] $msg +} "0 $globPreResult$x1" +test filename-12.6 {simple globbing} { + list [catch {glob globTest\\/\\x1.c} msg] $msg +} "0 $globPreResult$x1" + +test filename-13.1 {globbing with brace substitution} { + list [catch {glob globTest/\{\}} msg] $msg +} "0 $globPreResult" +test filename-13.2 {globbing with brace substitution} { + list [catch {glob globTest/\{} msg] $msg +} {1 {unmatched open-brace in file name}} +test filename-13.3 {globbing with brace substitution} { + list [catch {glob globTest/\{\\\}} msg] $msg +} {1 {unmatched open-brace in file name}} +test filename-13.4 {globbing with brace substitution} { + list [catch {glob globTest/\{\\} msg] $msg +} {1 {unmatched open-brace in file name}} +test filename-13.5 {globbing with brace substitution} { + list [catch {glob globTest/\}} msg] $msg +} {1 {unmatched close-brace in file name}} +test filename-13.6 {globbing with brace substitution} { + list [catch {glob globTest/\{\}x1.c} msg] $msg +} "0 $globPreResult$x1" +test filename-13.7 {globbing with brace substitution} { + list [catch {glob globTest/\{x\}1.c} msg] $msg +} "0 $globPreResult$x1" +test filename-13.8 {globbing with brace substitution} { + list [catch {glob globTest/\{x\{\}\}1.c} msg] $msg +} "0 $globPreResult$x1" +test filename-13.9 {globbing with brace substitution} {!win32s} { + list [lsort [catch {glob globTest/\{x,y\}1.c} msg]] $msg +} [list 0 [list $globPreResult$x1 $globPreResult$y1]] +test filename-13.10 {globbing with brace substitution} {!win32s} { + list [lsort [catch {glob globTest/\{x,,y\}1.c} msg]] $msg +} [list 0 [list $globPreResult$x1 $globPreResult$y1]] +test filename-13.11 {globbing with brace substitution} {unixOrPc && !win32s} { + list [lsort [catch {glob globTest/\{x,x\\,z,z\}1.c} msg]] $msg +} {0 {globTest/x1.c globTest/x,z1.c globTest/z1.c}} +test filename-13.12 {globbing with brace substitution} {macOnly} { + list [lsort [catch {glob globTest/\{x,x\\,z,z\}1.c} msg]] $msg +} {0 {:globTest:x1.c :globTest:x,z1.c :globTest:z1.c}} +test filename-13.13 {globbing with brace substitution} { + lsort [glob globTest/{a,b,x,y}1.c] +} [list $globPreResult$x1 $globPreResult$y1] +test filename-13.14 {globbing with brace substitution} {unixOrPc} { + lsort [glob {globTest/{x1,y2,weird name}.c}] +} {{globTest/weird name.c} globTest/x1.c} +test filename-13.15 {globbing with brace substitution} {macOnly} { + lsort [glob {globTest/{x1,y2,weird name}.c}] +} {{:globTest:weird name.c} :globTest:x1.c} +test filename-13.16 {globbing with brace substitution} {unixOrPc} { + lsort [glob globTest/{x1.c,a1/*}] +} {globTest/a1/b1 globTest/a1/b2 globTest/x1.c} +test filename-13.17 {globbing with brace substitution} {macOnly} { + lsort [glob globTest/{x1.c,a1/*}] +} {:globTest:a1:b1 :globTest:a1:b2 :globTest:x1.c} +test filename-13.18 {globbing with brace substitution} {unixOrPc} { + lsort [glob globTest/{x1.c,{a},a1/*}] +} {globTest/a1/b1 globTest/a1/b2 globTest/x1.c} +test filename-13.19 {globbing with brace substitution} {macOnly} { + lsort [glob globTest/{x1.c,{a},a1/*}] +} {:globTest:a1:b1 :globTest:a1:b2 :globTest:x1.c} +test filename-13.20 {globbing with brace substitution} {unixOrPc} { + lsort [glob globTest/{a,x}1/*/{x,y}*] +} {globTest/a1/b1/x2.c globTest/a1/b2/y2.c} +test filename-13.21 {globbing with brace substitution} {macOnly} { + lsort [glob globTest/{a,x}1/*/{x,y}*] +} {:globTest:a1:b1:x2.c :globTest:a1:b2:y2.c} +test filename-13.22 {globbing with brace substitution} { + list [catch {glob globTest/\{a,x\}1/*/\{} msg] $msg +} {1 {unmatched open-brace in file name}} + +test filename-14.1 {asterisks, question marks, and brackets} {unixOrPc && !win32s} { + lsort [glob g*/*.c] +} {{globTest/weird name.c} globTest/x,z1.c globTest/x1.c globTest/y1.c globTest/z1.c} +test filename-14.1 {asterisks, question marks, and brackets} {win32s} { + lsort [glob g*/*.c] +} {globtest/weirdn~1.c globtest/x1.c globtest/y1.c globtest/z1.c} +test filename-14.2 {asterisks, question marks, and brackets} {macOnly} { + lsort [glob g*/*.c] +} {{:globTest:weird name.c} :globTest:x,z1.c :globTest:x1.c :globTest:y1.c :globTest:z1.c} +test filename-14.3 {asterisks, question marks, and brackets} {unixOrPc} { + lsort [glob globTest/?1.c] +} {globTest/x1.c globTest/y1.c globTest/z1.c} +test filename-14.4 {asterisks, question marks, and brackets} {macOnly} { + lsort [glob globTest/?1.c] +} {:globTest:x1.c :globTest:y1.c :globTest:z1.c} +test filename-14.5 {asterisks, question marks, and brackets} {unixOrPc && !win32s} { + lsort [glob */*/*/*.c] +} {globTest/a1/b1/x2.c globTest/a1/b2/y2.c} +test filename-14.5 {asterisks, question marks, and brackets} {win32s} { + lsort [glob */*/*/*.c] +} {globtest/a1/b1/x2.c globtest/a1/b2/y2.c} +test filename-14.6 {asterisks, question marks, and brackets} {macOnly} { + lsort [glob */*/*/*.c] +} {:globTest:a1:b1:x2.c :globTest:a1:b2:y2.c} +test filename-14.7 {asterisks, question marks, and brackets} {unixOrPc && !win32s} { + lsort [glob globTest/*] +} {globTest/a1 globTest/a2 globTest/a3 {globTest/weird name.c} globTest/x,z1.c globTest/x1.c globTest/y1.c globTest/z1.c} +test filename-14.7 {asterisks, question marks, and brackets} {win32s} { + lsort [glob globTest/*] +} {globTest/a1 globTest/a2 globTest/a3 globTest/weirdn~1.c globTest/x1.c globTest/y1.c globTest/z1.c} +test filename-14.8 {asterisks, question marks, and brackets} {macOnly} { + lsort [glob globTest/*] +} {:globTest:.1 :globTest:a1 :globTest:a2 :globTest:a3 {:globTest:weird name.c} :globTest:x,z1.c :globTest:x1.c :globTest:y1.c :globTest:z1.c} +test filename-14.9 {asterisks, question marks, and brackets} {unixOrPc && !win32s} { + lsort [glob globTest/.*] +} {globTest/. globTest/.. globTest/.1} +test filename-14.9 {asterisks, question marks, and brackets} {win32s} { + lsort [glob globTest/.*] +} {globTest/. globTest/..} +test filename-14.10 {asterisks, question marks, and brackets} {macOnly} { + lsort [glob globTest/.*] +} {:globTest:.1} +test filename-14.11 {asterisks, question marks, and brackets} {unixOrPc} { + lsort [glob globTest/*/*] +} {globTest/a1/b1 globTest/a1/b2 globTest/a2/b3} +test filename-14.12 {asterisks, question marks, and brackets} {macOnly} { + lsort [glob globTest/*/*] +} {:globTest:a1:b1 :globTest:a1:b2 :globTest:a2:b3} +test filename-14.13 {asterisks, question marks, and brackets} {unixOrPc} { + lsort [glob {globTest/[xyab]1.*}] +} {globTest/x1.c globTest/y1.c} +test filename-14.14 {asterisks, question marks, and brackets} {macOnly} { + lsort [glob {globTest/[xyab]1.*}] +} {:globTest:x1.c :globTest:y1.c} +test filename-14.15 {asterisks, question marks, and brackets} {unixOrPc} { + lsort [glob globTest/*/] +} {globTest/a1/ globTest/a2/ globTest/a3/} +test filename-14.16 {asterisks, question marks, and brackets} {macOnly} { + lsort [glob globTest/*/] +} {:globTest:a1: :globTest:a2: :globTest:a3:} +test filename-14.17 {asterisks, question marks, and brackets} { + global env + set temp $env(HOME) + set env(HOME) [file join $env(HOME) globTest] + set result [list [catch {glob ~/z*} msg] $msg] + set env(HOME) $temp + set result +} [list 0 [list [file join $env(HOME) globTest z1.c]]] +test filename-14.18 {asterisks, question marks, and brackets} {unixOrPc && !win32s} { + list [catch {lsort [glob globTest/*.c goo/*]} msg] $msg +} {0 {{globTest/weird name.c} globTest/x,z1.c globTest/x1.c globTest/y1.c globTest/z1.c}} +test filename-14.18 {asterisks, question marks, and brackets} {win32s} { + list [catch {lsort [glob globTest/*.c goo/*]} msg] $msg +} {0 {globTest/weirdn~1.c globTest/x1.c globTest/y1.c globTest/z1.c}} +test filename-14.19 {asterisks, question marks, and brackets} {macOnly} { + list [catch {lsort [glob globTest/*.c goo/*]} msg] $msg +} {0 {{:globTest:weird name.c} :globTest:x,z1.c :globTest:x1.c :globTest:y1.c :globTest:z1.c}} +test filename-14.20 {asterisks, question marks, and brackets} { + list [catch {glob -nocomplain goo/*} msg] $msg +} {0 {}} +test filename-14.21 {asterisks, question marks, and brackets} { + list [catch {glob globTest/*/gorp} msg] $msg +} {1 {no files matched glob pattern "globTest/*/gorp"}} +test filename-14.22 {asterisks, question marks, and brackets} { + list [catch {glob goo/* x*z foo?q} msg] $msg +} {1 {no files matched glob patterns "goo/* x*z foo?q"}} +test filename-14.23 {slash globbing} {unixOrPc} { + glob / +} / +test filename-14.24 {slash globbing} {pcOnly} { + glob {\\} +} / + +# The following tests are only valid for Unix systems. + +if {$tcl_platform(platform) == "unix"} { + # On some systems, like AFS, "000" protection doesn't prevent + # access by owner, so the following test is not portable. + + exec chmod 000 globTest/a1 + test filename-15.1 {unix specific globbing} {nonPortable} { + string tolower [list [catch {glob globTest/a1/*} msg] $msg $errorCode] + } {1 {couldn't read directory "globtest/a1": permission denied} {posix eacces {permission denied}}} + test filename-15.2 {unix specific no complain: no errors} {nonPortable} { + glob -nocomplain globTest/a1/* + } {} + test filename-15.3 {unix specific no complain: no errors, good result} {nonPortable knownBug} { + # test fails because if an error occur , the interp's result + # is reset... + glob -nocomplain globTest/a2 globTest/a1/* globTest/a3 + } {globTest/a2 globTest/a3} + exec chmod 755 globTest/a1 + test filename-15.4 {unix specific no complain: no errors, good result} {nonPortable knownBug} { + # test fails because if an error occur , the interp's result + # is reset... (or you don't run at sunscript where the + # outser and demailly's users exists + glob -nocomplain ~ouster ~foo ~demailly + } {/home/ouster /home/demailly} + test filename-15.5 {unix specific globbing} {nonPortable} { + glob ~ouster/.csh* + } "/home/ouster/.cshrc" + close [open globTest/odd\\\[\]*?\{\}name w] + test filename-15.6 {unix specific globbing} { + global env + set temp $env(HOME) + set env(HOME) $env(HOME)/globTest/odd\\\[\]*?\{\}name + set result [list [catch {glob ~} msg] $msg] + set env(HOME) $temp + set result + } [list 0 [list [glob ~]/globTest/odd\\\[\]*?\{\}name]] + exec rm -f globTest/odd\\\[\]*?\{\}name +} + +# The following tests are only valid for Windows systems. + +if {$tcl_platform(platform) == "windows"} { + set temp [pwd] + cd c:/ + catch { + removeDirectory globTest + makeDirectory globTest + close [open globTest/x1.BAT w] + close [open globTest/y1.Bat w] + close [open globTest/z1.bat w] + } + + test filename-16.1 {windows specific globbing} {!win32s} { + lsort [glob globTest/*.bat] + } {globTest/x1.BAT globTest/y1.Bat globTest/z1.bat} + test filename-16.1 {windows specific globbing} {win32s} { + lsort [glob globTest/*.bat] + } {globTest/x1.bat globTest/y1.bat globTest/z1.bat} + test filename-16.2 {windows specific globbing} { + glob c: + } c: + test filename-16.3 {windows specific globbing} { + glob c:\\\\ + } c:/ + test filename-16.4 {windows specific globbing} { + glob c:/ + } c:/ + test filename-16.5 {windows specific globbing} {!win32s} { + glob c:*Test + } c:globTest + test filename-16.5 {windows specific globbing} {win32s} { + glob c:*Test + } c:globtest + test filename-16.6 {windows specific globbing} {!win32s} { + glob c:\\\\*Test + } c:/globTest + test filename-16.6 {windows specific globbing} {win32s} { + glob c:\\\\*Test + } c:/globtest + test filename-16.7 {windows specific globbing} {!win32s} { + glob c:/*Test + } c:/globTest + test filename-16.7 {windows specific globbing} {win32s} { + glob c:/*Test + } c:/globtest + test filename-16.8 {windows specific globbing} {!win32s} { + lsort [glob c:globTest/*.bat] + } {c:globTest/x1.BAT c:globTest/y1.Bat c:globTest/z1.bat} + test filename-16.8 {windows specific globbing} {win32s} { + lsort [glob c:globTest/*.bat] + } {c:globTest/x1.bat c:globTest/y1.bat c:globTest/z1.bat} + test filename-16.9 {windows specific globbing} {!win32s} { + lsort [glob c:/globTest/*.bat] + } {c:/globTest/x1.BAT c:/globTest/y1.Bat c:/globTest/z1.bat} + test filename-16.9 {windows specific globbing} {win32s} { + lsort [glob c:/globTest/*.bat] + } {c:/globTest/x1.bat c:/globTest/y1.bat c:/globTest/z1.bat} + test filename-16.10 {windows specific globbing} {!win32s} { + lsort [glob c:globTest\\\\*.bat] + } {c:globTest/x1.BAT c:globTest/y1.Bat c:globTest/z1.bat} + test filename-16.10 {windows specific globbing} {win32s} { + lsort [glob c:globTest\\\\*.bat] + } {c:globTest/x1.bat c:globTest/y1.bat c:globTest/z1.bat} + test filename-16.11 {windows specific globbing} {!win32s} { + lsort [glob c:\\\\globTest\\\\*.bat] + } {c:/globTest/x1.BAT c:/globTest/y1.Bat c:/globTest/z1.bat} + test filename-16.11 {windows specific globbing} {win32s} { + lsort [glob c:\\\\globTest\\\\*.bat] + } {c:/globTest/x1.bat c:/globTest/y1.bat c:/globTest/z1.bat} + + removeDirectory globTest + + if {($testConfig(nonPortable) != 0) && [catch {cd //gaspode/d}] == 0} { + removeDirectory globTest + makeDirectory globTest + + close [open globTest/x1.BAT w] + close [open globTest/y1.Bat w] + close [open globTest/z1.bat w] + + test filename-16.12 {windows specific globbing} { + glob //gaspode/d/*Test + } //gaspode/d/globTest + test filename-16.13 {windows specific globbing} { + glob {\\\\gaspode\\d\\*Test} + } //gaspode/d/globTest + + removeDirectory globTest + } + + cd $temp +} + +removeDirectory globTest +set env(HOME) $oldhome + +testsetplatform $platform +catch {unset oldhome platform temp result} +concat "" diff --git a/tests/for-old.test b/tests/for-old.test new file mode 100644 index 0000000..354f3d68 --- /dev/null +++ b/tests/for-old.test @@ -0,0 +1,66 @@ +# Commands covered: for, continue, break +# +# This file contains the original set of tests for Tcl's for command. +# Since the for command is now compiled, a new set of tests covering +# the new implementation is in the file "for.test". Sourcing this file +# into Tcl runs the tests and generates output for errors. +# No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) for-old.test 1.14 97/01/13 13:42:18 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Check "for" and its use of continue and break. + +catch {unset a i} +test for-old-1.1 {for tests} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} { + set a [concat $a $i] + } + set a +} {1 2 3 4 5} +test for-old-1.2 {for tests} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} { + if $i==4 continue + set a [concat $a $i] + } + set a +} {1 2 3 5} +test for-old-1.3 {for tests} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} { + if $i==4 break + set a [concat $a $i] + } + set a +} {1 2 3} +test for-old-1.4 {for tests} {catch {for 1 2 3} msg} 1 +test for-old-1.5 {for tests} { + catch {for 1 2 3} msg + set msg +} {wrong # args: should be "for start test next command"} +test for-old-1.6 {for tests} {catch {for 1 2 3 4 5} msg} 1 +test for-old-1.7 {for tests} { + catch {for 1 2 3 4 5} msg + set msg +} {wrong # args: should be "for start test next command"} +test for-old-1.8 {for tests} { + set a {xyz} + for {set i 1} {$i<6} {set i [expr $i+1]} {} + set a +} xyz +test for-old-1.9 {for tests} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]; if $i==4 break} { + set a [concat $a $i] + } + set a +} {1 2 3} diff --git a/tests/for.test b/tests/for.test new file mode 100644 index 0000000..aa918ec --- /dev/null +++ b/tests/for.test @@ -0,0 +1,592 @@ +# Commands covered: for, continue, break +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) for.test 1.10 97/07/02 16:40:59 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Basic "for" operation. + +test for-1.1 {TclCompileForCmd: missing initial command} { + list [catch {for} msg] $msg +} {1 {wrong # args: should be "for start test next command"}} +test for-1.2 {TclCompileForCmd: error in initial command} { + list [catch {for {set}} msg] $msg $errorInfo +} {1 {wrong # args: should be "for start test next command"} {wrong # args: should be "for start test next command" + while compiling +"for {set}"}} +catch {unset i} +test for-1.3 {TclCompileForCmd: missing test expression} { + catch {for {set i 0}} msg + set msg +} {wrong # args: should be "for start test next command"} +test for-1.4 {TclCompileForCmd: error in test expression} { + catch {for {set i 0} {$i<}} msg + set errorInfo +} {wrong # args: should be "for start test next command" + while compiling +"for {set i 0} {$i<}"} +test for-1.5 {TclCompileForCmd: test expression is enclosed in quotes} { + set i 0 + for {} "$i > 5" {incr i} {} +} {} +test for-1.6 {TclCompileForCmd: missing "next" command} { + catch {for {set i 0} {$i < 5}} msg + set msg +} {wrong # args: should be "for start test next command"} +test for-1.7 {TclCompileForCmd: missing command body} { + catch {for {set i 0} {$i < 5} {incr i}} msg + set msg +} {wrong # args: should be "for start test next command"} +test for-1.8 {TclCompileForCmd: error compiling command body} { + catch {for {set i 0} {$i < 5} {incr i} {set}} msg + set errorInfo +} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + ("for" body line 1) + while compiling +"for {set i 0} {$i < 5} {incr i} {set}"} +catch {unset a} +test for-1.9 {TclCompileForCmd: simple command body} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} { + if $i==4 break + set a [concat $a $i] + } + set a +} {1 2 3} +test for-1.10 {TclCompileForCmd: command body in quotes} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} "append a x" + set a +} {xxxxx} +test for-1.11 {TclCompileForCmd: computed command body} { + catch {unset x1} + catch {unset bb} + catch {unset x2} + set x1 {append a x1; } + set bb {break} + set x2 {; append a x2} + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} $x1$bb$x2 + set a +} {x1} +test for-1.12 {TclCompileForCmd: error in "next" command} { + catch {for {set i 0} {$i < 5} {set} {puts $i}} msg + set errorInfo +} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + ("for" loop-end command) + while compiling +"for {set i 0} {$i < 5} {set} {puts $i}"} +test for-1.13 {TclCompileForCmd: long command body} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} { + if $i==4 break + if $i>5 continue + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + set a [concat $a $i] + } + set a +} {1 2 3} +test for-1.14 {TclCompileForCmd: for command result} { + set a [for {set i 0} {$i < 5} {incr i} {}] + set a +} {} +test for-1.15 {TclCompileForCmd: for command result} { + set a [for {set i 0} {$i < 5} {incr i} {if $i==3 break}] + set a +} {} + +# Check "for" and "continue". + +test for-2.1 {TclCompileContinueCmd: arguments after "continue"} { + catch {continue foo} msg + set msg +} {wrong # args: should be "continue"} +test for-2.2 {TclCompileContinueCmd: continue result} { + catch continue +} 4 +test for-2.3 {continue tests} { + set a {} + for {set i 1} {$i <= 4} {set i [expr $i+1]} { + if {$i == 2} continue + set a [concat $a $i] + } + set a +} {1 3 4} +test for-2.4 {continue tests} { + set a {} + for {set i 1} {$i <= 4} {set i [expr $i+1]} { + if {$i != 2} continue + set a [concat $a $i] + } + set a +} {2} +test for-2.5 {continue tests, nested loops} { + set msg {} + for {set i 1} {$i <= 4} {incr i} { + for {set a 1} {$a <= 2} {incr a} { + if {$i>=2 && $a>=2} continue + set msg [concat $msg "$i.$a"] + } + } + set msg +} {1.1 1.2 2.1 3.1 4.1} +test for-2.6 {continue tests, long command body} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} { + if $i==2 continue + if $i==4 break + if $i>5 continue + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + set a [concat $a $i] + } + set a +} {1 3} + +# Check "for" and "break". + +test for-3.1 {TclCompileBreakCmd: arguments after "break"} { + catch {break foo} msg + set msg +} {wrong # args: should be "break"} +test for-3.2 {TclCompileBreakCmd: break result} { + catch break +} 3 +test for-3.3 {break tests} { + set a {} + for {set i 1} {$i <= 4} {incr i} { + if {$i == 3} break + set a [concat $a $i] + } + set a +} {1 2} +test for-3.4 {break tests, nested loops} { + set msg {} + for {set i 1} {$i <= 4} {incr i} { + for {set a 1} {$a <= 2} {incr a} { + if {$i>=2 && $a>=2} break + set msg [concat $msg "$i.$a"] + } + } + set msg +} {1.1 1.2 2.1 3.1 4.1} +test for-3.5 {break tests, long command body} { + set a {} + for {set i 1} {$i<6} {set i [expr $i+1]} { + if $i==2 continue + if $i==5 break + if $i>5 continue + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if $i==4 break + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + set a [concat $a $i] + } + set a +} {1 3} +# A simplified version of exmh's mail formatting routine to stress "for", +# "break", "while", and "if". +proc formatMail {} { + array set lines { + 0 {Return-path: george@tcl} \ + 1 {Return-path: <george@tcl>} \ + 2 {Received: from tcl by tcl.Somewhere.COM (SMI-8.6/SMI-SVR4)} \ + 3 { id LAA10027; Wed, 11 Sep 1996 11:14:53 -0700} \ + 4 {Message-id: <199609111814.LAA10027@tcl.Somewhere.COM>} \ + 5 {X-mailer: exmh version 1.6.9 8/22/96} \ + 6 {Mime-version: 1.0} \ + 7 {Content-type: text/plain; charset=iso-8859-1} \ + 8 {Content-transfer-encoding: quoted-printable} \ + 9 {Content-length: 2162} \ + 10 {To: fred} \ + 11 {Subject: tcl7.6} \ + 12 {Date: Wed, 11 Sep 1996 11:14:53 -0700} \ + 13 {From: George <george@tcl>} \ + 14 {The Tcl 7.6 and Tk 4.2 releases} \ + 15 {} \ + 16 {This page contains information about Tcl 7.6 and Tk4.2, which are the most recent} \ + 17 {releases of the Tcl scripting language and the Tk toolkit. The first beta versions of these} \ + 18 {releases were released on August 30, 1996. These releases contain only minor changes,} \ + 19 {so we hope to have only a single beta release and to go final in early October, 1996. } \ + 20 {} \ + 21 {} \ + 22 {What's new } \ + 23 {} \ + 24 {The most important changes in the releases are summarized below. See the README} \ + 25 {and changes files in the distributions for more complete information on what has} \ + 26 {changed, including both feature changes and bug fixes. } \ + 27 {} \ + 28 { There are new options to the file command for copying files (file copy),} \ + 29 { deleting files and directories (file delete), creating directories (file} \ + 30 { mkdir), and renaming files (file rename). } \ + 31 { The implementation of exec has been improved greatly for Windows 95 and} \ + 32 { Windows NT. } \ + 33 { There is a new memory allocator for the Macintosh version, which should be} \ + 34 { more efficient than the old one. } \ + 35 { Tk's grid geometry manager has been completely rewritten. The layout} \ + 36 { algorithm produces much better layouts than before, especially where rows or} \ + 37 { columns were stretchable. } \ + 38 { There are new commands for creating common dialog boxes:} \ + 39 { tk_chooseColor, tk_getOpenFile, tk_getSaveFile and} \ + 40 { tk_messageBox. These use native dialog boxes if they are available. } \ + 41 { There is a new virtual event mechanism for handling events in a more portable} \ + 42 { way. See the new command event. It also allows events (both physical and} \ + 43 { virtual) to be generated dynamically. } \ + 44 {} \ + 45 {Tcl 7.6 and Tk 4.2 are backwards-compatible with Tcl 7.5 and Tk 4.1 except for} \ + 46 {changes in the C APIs for custom channel drivers. Scripts written for earlier releases} \ + 47 {should work on these new releases as well. } \ + 48 {} \ + 49 {Obtaining The Releases} \ + 50 {} \ + 51 {Binary Releases} \ + 52 {} \ + 53 {Pre-compiled releases are available for the following platforms: } \ + 54 {} \ + 55 { Windows 3.1, Windows 95, and Windows NT: Fetch} \ + 56 { ftp://ftp.sunlabs.com/pub/tcl/win42b1.exe, then execute it. The file is a} \ + 57 { self-extracting executable. It will install the Tcl and Tk libraries, the wish and} \ + 58 { tclsh programs, and documentation. } \ + 59 { Macintosh (both 68K and PowerPC): Fetch} \ + 60 { ftp://ftp.sunlabs.com/pub/tcl/mactk4.2b1.sea.hqx. The file is in binhex format,} \ + 61 { which is understood by Fetch, StuffIt, and many other Mac utilities. The} \ + 62 { unpacked file is a self-installing executable: double-click on it and it will create a} \ + 63 { folder containing all that you need to run Tcl and Tk. } \ + 64 { UNIX (Solaris 2.* and SunOS, other systems soon to follow). Easy to install} \ + 65 { binary packages are now for sale at the Sun Labs Tcl/Tk Shop. Check it out!} \ + } + + set result "" + set NL " +" + set tag {level= type=text/plain part=0 sel Charset} + set ix [lsearch -regexp $tag text/enriched] + if {$ix < 0} { + set ranges {} + set quote 0 + } + set breakrange {6.42 78.0} + set F1 [lindex $breakrange 0] + set F2 [lindex $breakrange 1] + set breakrange [lrange $breakrange 2 end] + if {[string length $F1] == 0} { + set F1 -1 + set break 0 + } else { + set break 1 + } + + set xmailer 0 + set inheaders 1 + set last [array size lines] + set plen 2 + for {set L 1} {$L < $last} {incr L} { + set line $lines($L) + if {$inheaders} { + # Blank or empty line terminates headers + # Leading --- terminates headers + if {[regexp {^[ ]*$} $line] || [regexp {^--+} $line]} { + set inheaders 0 + } + if {[regexp -nocase {^x-mailer:} $line]} { + continue + } + } + if $inheaders { + set limit 55 + } else { + set limit 55 + + # Decide whether or not to break the body line + + if {$plen > 0} { + if {[string first {> } $line] == 0} { + # This is quoted text from previous message, don't reformat + append result $line $NL + if {$quote && !$inheaders} { + # Fix from <sarr@umich.edu> to handle text/enriched + if {$L > $L1 && $L < $L2 && $line != {}} { + # enriched requires two newlines for each one. + append result $NL + } elseif {$L > $L2} { + set L1 [lindex $ranges 0] + set L2 [lindex $ranges 1] + set ranges [lrange $ranges 2 end] + set quote [llength $L1] + } + } + continue + } + } + if {$F1 < 0} { + # Nothing left to format + append result $line $NL + continue + } elseif {$L < $F1} { + # Not yet to formatted block + append result $line $NL + continue + } elseif {$L > $F2} { + # Past formatted block + set F1 [lindex $breakrange 0] + set F2 [lindex $breakrange 1] + set breakrange [lrange $breakrange 2 end] + append result $line $NL + if {[string length $F1] == 0} { + set F1 -1 + } + continue + } + } + set climit [expr $limit-1] + set cutoff 50 + set continuation 0 + + while {[string length $line] > $limit} { + for {set c [expr $limit-1]} {$c >= $cutoff} {incr c -1} { + set char [string index $line $c] + if {$char == " " || $char == "\t"} { + break + } + if {$char == ">"} { ;# Hack for enriched formatting + break + } + } + if {$c < $cutoff} { + if {! $inheaders} { + set c [expr $limit-1] + } else { + set c [string length $line] + } + } + set newline [string range $line 0 $c] + if {! $continuation} { + append result $newline $NL + } else { + append result \ $newline $NL + } + incr c + set line [string trimright [string range $line $c end]] + if {$inheaders} { + set continuation 1 + set limit $climit + } + } + if {$continuation} { + if {[string length $line] != 0} { + append result \ $line $NL + } + } else { + append result $line $NL + if {$quote && !$inheaders} { + if {$L > $L1 && $L < $L2 && $line != {}} { + # enriched requires two newlines for each one. + append result "" $NL + } elseif {$L > $L2} { + set L1 [lindex $ranges 0] + set L2 [lindex $ranges 1] + set ranges [lrange $ranges 2 end] + set quote [llength $L1] + } + } + } + } + return $result +} +test for-3.6 {break tests} { + formatMail +} {Return-path: <george@tcl> +Received: from tcl by tcl.Somewhere.COM (SMI-8.6/SMI-SVR4) + id LAA10027; Wed, 11 Sep 1996 11:14:53 -0700 +Message-id: <199609111814.LAA10027@tcl.Somewhere.COM> +Mime-version: 1.0 +Content-type: text/plain; charset=iso-8859-1 +Content-transfer-encoding: quoted-printable +Content-length: 2162 +To: fred +Subject: tcl7.6 +Date: Wed, 11 Sep 1996 11:14:53 -0700 +From: George <george@tcl> +The Tcl 7.6 and Tk 4.2 releases + +This page contains information about Tcl 7.6 and Tk4.2, + which are the most recent +releases of the Tcl scripting language and the Tk toolk +it. The first beta versions of these +releases were released on August 30, 1996. These releas +es contain only minor changes, +so we hope to have only a single beta release and to +go final in early October, 1996. + + +What's new + +The most important changes in the releases are summariz +ed below. See the README +and changes files in the distributions for more complet +e information on what has +changed, including both feature changes and bug fixes. + + There are new options to the file command for +copying files (file copy), + deleting files and directories (file delete), +creating directories (file + mkdir), and renaming files (file rename). + The implementation of exec has been improved great +ly for Windows 95 and + Windows NT. + There is a new memory allocator for the Macintosh +version, which should be + more efficient than the old one. + Tk's grid geometry manager has been completely +rewritten. The layout + algorithm produces much better layouts than before +, especially where rows or + columns were stretchable. + There are new commands for creating common dialog +boxes: + tk_chooseColor, tk_getOpenFile, tk_getSaveFile and + tk_messageBox. These use native dialog boxes if +they are available. + There is a new virtual event mechanism for handlin +g events in a more portable + way. See the new command event. It also allows +events (both physical and + virtual) to be generated dynamically. + +Tcl 7.6 and Tk 4.2 are backwards-compatible with Tcl +7.5 and Tk 4.1 except for +changes in the C APIs for custom channel drivers. Scrip +ts written for earlier releases +should work on these new releases as well. + +Obtaining The Releases + +Binary Releases + +Pre-compiled releases are available for the following +platforms: + + Windows 3.1, Windows 95, and Windows NT: Fetch + ftp://ftp.sunlabs.com/pub/tcl/win42b1.exe, then +execute it. The file is a + self-extracting executable. It will install the +Tcl and Tk libraries, the wish and + tclsh programs, and documentation. + Macintosh (both 68K and PowerPC): Fetch + ftp://ftp.sunlabs.com/pub/tcl/mactk4.2b1.sea.hqx. +The file is in binhex format, + which is understood by Fetch, StuffIt, and many +other Mac utilities. The + unpacked file is a self-installing executable: +double-click on it and it will create a + folder containing all that you need to run Tcl +and Tk. + UNIX (Solaris 2.* and SunOS, other systems +soon to follow). Easy to install + binary packages are now for sale at the Sun Labs +Tcl/Tk Shop. Check it out! +} + +# Check that "break" resets the interpreter's result + +test for-4.1 {break must reset the interp result} { + catch { + set z GLOBTESTDIR/dir2/file2.c + if [string match GLOBTESTDIR/dir2/* $z] { + break + } + } j + set j +} {} + +# Check "for" and computed command names. + +test for-5.1 {for and computed command names} { + set j 0 + set z for + $z {set i 0} {$i<10} {incr i} {set j $i} + set j +} 9 diff --git a/tests/foreach.test b/tests/foreach.test new file mode 100644 index 0000000..f87dd39 --- /dev/null +++ b/tests/foreach.test @@ -0,0 +1,212 @@ +# Commands covered: foreach, continue, break +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) foreach.test 1.8 97/08/12 18:19:27 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {unset a} +catch {unset x} + +# Basic "foreach" operation. + +test foreach-1.1 {basic foreach tests} { + set a {} + foreach i {a b c d} { + set a [concat $a $i] + } + set a +} {a b c d} +test foreach-1.2 {basic foreach tests} { + set a {} + foreach i {a b {{c d} e} {123 {{x}}}} { + set a [concat $a $i] + } + set a +} {a b {c d} e 123 {{x}}} +test foreach-1.3 {basic foreach tests} {catch {foreach} msg} 1 +test foreach-1.4 {basic foreach tests} { + catch {foreach} msg + set msg +} {wrong # args: should be "foreach varList list ?varList list ...? command"} +test foreach-1.5 {basic foreach tests} {catch {foreach i} msg} 1 +test foreach-1.6 {basic foreach tests} { + catch {foreach i} msg + set msg +} {wrong # args: should be "foreach varList list ?varList list ...? command"} +test foreach-1.7 {basic foreach tests} {catch {foreach i j} msg} 1 +test foreach-1.8 {basic foreach tests} { + catch {foreach i j} msg + set msg +} {wrong # args: should be "foreach varList list ?varList list ...? command"} +test foreach-1.9 {basic foreach tests} {catch {foreach i j k l} msg} 1 +test foreach-1.10 {basic foreach tests} { + catch {foreach i j k l} msg + set msg +} {wrong # args: should be "foreach varList list ?varList list ...? command"} +test foreach-1.11 {basic foreach tests} { + set a {} + foreach i {} { + set a [concat $a $i] + } + set a +} {} +test foreach-1.12 {foreach errors} { + list [catch {foreach {{a}{b}} {1 2 3} {}} msg] $msg +} {1 {list element in braces followed by "{b}" instead of space}} +test foreach-1.13 {foreach errors} { + list [catch {foreach a {{1 2}3} {}} msg] $msg +} {1 {list element in braces followed by "3" instead of space}} +catch {unset a} +test foreach-1.14 {foreach errors} { + catch {unset a} + set a(0) 44 + list [catch {foreach a {1 2 3} {}} msg] $msg +} {1 {couldn't set loop variable: "a"}} +test foreach-1.15 {foreach errors} { + list [catch {foreach {} {} {}} msg] $msg +} {1 {foreach varlist is empty}} +catch {unset a} + +test foreach-2.1 {parallel foreach tests} { + set x {} + foreach {a b} {1 2 3 4} { + append x $b $a + } + set x +} {2143} +test foreach-2.2 {parallel foreach tests} { + set x {} + foreach {a b} {1 2 3 4 5} { + append x $b $a + } + set x +} {21435} +test foreach-2.3 {parallel foreach tests} { + set x {} + foreach a {1 2 3} b {4 5 6} { + append x $b $a + } + set x +} {415263} +test foreach-2.4 {parallel foreach tests} { + set x {} + foreach a {1 2 3} b {4 5 6 7 8} { + append x $b $a + } + set x +} {41526378} +test foreach-2.5 {parallel foreach tests} { + set x {} + foreach {a b} {a b A B aa bb} c {c C cc CC} { + append x $a $b $c + } + set x +} {abcABCaabbccCC} +test foreach-2.6 {parallel foreach tests} { + set x {} + foreach a {1 2 3} b {1 2 3} c {1 2 3} d {1 2 3} e {1 2 3} { + append x $a $b $c $d $e + } + set x +} {111112222233333} +test foreach-2.7 {parallel foreach tests} { + set x {} + foreach a {} b {1 2 3} c {1 2} d {1 2 3 4} e {{1 2}} { + append x $a $b $c $d $e + } + set x +} {1111 2222334} +test foreach-2.8 {foreach only sets vars if repeating loop} { + proc foo {} { + set rgb {65535 0 0} + foreach {r g b} [set rgb] {} + return "r=$r, g=$g, b=$b" + } + foo +} {r=65535, g=0, b=0} +test foreach-2.9 {foreach only supports local scalar variables} { + proc foo {} { + set x {} + foreach {a(3)} {1 2 3 4} {lappend x [set {a(3)}]} + set x + } + foo +} {1 2 3 4} + +test foreach-3.1 {compiled foreach backward jump works correctly} { + catch {unset x} + proc foo {arrayName} { + upvar 1 $arrayName a + set l {} + foreach member [array names a] { + lappend l [list $member [set a($member)]] + } + return $l + } + array set x {0 zero 1 one 2 two 3 three} + foo x +} {{0 zero} {1 one} {2 two} {3 three}} + +test foreach-4.1 {noncompiled foreach and shared variable or value list objects that are converted to another type} { + catch {unset x} + foreach {12.0} {a b c} { + set x 12.0 + set x [expr $x + 1] + } + set x +} 13.0 + +# Check "continue". + +test foreach-4.1 {continue tests} {catch continue} 4 +test foreach-4.2 {continue tests} { + set a {} + foreach i {a b c d} { + if {[string compare $i "b"] == 0} continue + set a [concat $a $i] + } + set a +} {a c d} +test foreach-4.3 {continue tests} { + set a {} + foreach i {a b c d} { + if {[string compare $i "b"] != 0} continue + set a [concat $a $i] + } + set a +} {b} +test foreach-4.4 {continue tests} {catch {continue foo} msg} 1 +test foreach-4.5 {continue tests} { + catch {continue foo} msg + set msg +} {wrong # args: should be "continue"} + +# Check "break". + +test foreach-5.1 {break tests} {catch break} 3 +test foreach-5.2 {break tests} { + set a {} + foreach i {a b c d} { + if {[string compare $i "c"] == 0} break + set a [concat $a $i] + } + set a +} {a b} +test foreach-5.3 {break tests} {catch {break foo} msg} 1 +test foreach-5.4 {break tests} { + catch {break foo} msg + set msg +} {wrong # args: should be "break"} + +catch {unset a} +catch {unset x} diff --git a/tests/format.test b/tests/format.test new file mode 100644 index 0000000..758825b --- /dev/null +++ b/tests/format.test @@ -0,0 +1,438 @@ +# Commands covered: format +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1994 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) format.test 1.29 97/09/03 15:51:02 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# The following code is needed because some versions of SCO Unix have +# a round-off error in sprintf which would cause some of the tests to +# fail. Someday I hope this code shouldn't be necessary (code added +# 9/9/91). + +set roundOffBug 0 +if {"[format %7.1e 68.514]" == "6.8e+01"} { + puts stdout "Note: this system has a sprintf round-off bug, some tests skipped\n" + set roundOffBug 1 +} + +test format-1.1 {integer formatting} { + format "%*d %d %d %d" 6 34 16923 -12 -1 +} { 34 16923 -12 -1} +test format-1.2 {integer formatting} {nonPortable} { + format "%4d %4d %4d %4d %d %#x %#X" 6 34 16923 -12 -1 14 12 +} { 6 34 16923 -12 -1 0xe 0XC} + +# %u output depends on word length, so this test is not portable. + +test format-1.3 {integer formatting} {nonPortable} { + format "%4u %4u %4u %4u %d %#o" 6 34 16923 -12 -1 0 +} { 6 34 16923 4294967284 -1 0} +test format-1.4 {integer formatting} { + format "%-4d %-4i %-4d %-4ld" 6 34 16923 -12 -1 +} {6 34 16923 -12 } +test format-1.5 {integer formatting} { + format "%04d %04d %04d %04i" 6 34 16923 -12 -1 +} {0006 0034 16923 -012} +test format-1.6 {integer formatting} { + format "%00*d" 6 34 +} {000034} + +# Printing negative numbers in hex or octal format depends on word +# length, so these tests are not portable. + +test format-1.7 {integer formatting} {nonPortable} { + format "%4x %4x %4x %4x" 6 34 16923 -12 -1 +} { 6 22 421b fffffff4} +test format-1.8 {integer formatting} {nonPortable} { + format "%#x %#X %#X %#x" 6 34 16923 -12 -1 +} {0x6 0X22 0X421B 0xfffffff4} +test format-1.9 {integer formatting} {nonPortable} { + format "%#20x %#20x %#20x %#20x" 6 34 16923 -12 -1 +} { 0x6 0x22 0x421b 0xfffffff4} +test format-1.10 {integer formatting} {nonPortable} { + format "%-#20x %-#20x %-#20x %-#20x" 6 34 16923 -12 -1 +} {0x6 0x22 0x421b 0xfffffff4 } +test format-1.11 {integer formatting} {nonPortable} { + format "%-#20o %#-20o %#-20o %#-20o" 6 34 16923 -12 -1 +} {06 042 041033 037777777764 } + +test format-2.1 {string formatting} { + format "%s %s %c %s" abcd {This is a very long test string.} 120 x +} {abcd This is a very long test string. x x} +test format-2.2 {string formatting} { + format "%20s %20s %20c %20s" abcd {This is a very long test string.} 120 x +} { abcd This is a very long test string. x x} +test format-2.3 {string formatting} { + format "%.10s %.10s %c %.10s" abcd {This is a very long test string.} 120 x +} {abcd This is a x x} +test format-2.4 {string formatting} { + format "%s %s %% %c %s" abcd {This is a very long test string.} 120 x +} {abcd This is a very long test string. % x x} + +test format-3.1 {e and f formats} { + format "%e %e %e %e" 34.2e12 68.514 -.125 -16000. .000053 +} {3.420000e+13 6.851400e+01 -1.250000e-01 -1.600000e+04} +test format-3.2 {e and f formats} { + format "%20e %20e %20e %20e" 34.2e12 68.514 -.125 -16000. .000053 +} { 3.420000e+13 6.851400e+01 -1.250000e-01 -1.600000e+04} +if {!$roundOffBug} { + test format-3.3 {e and f formats} { + format "%.1e %.1e %.1e %.1e" 34.2e12 68.514 -.126 -16000. .000053 + } {3.4e+13 6.9e+01 -1.3e-01 -1.6e+04} + test format-3.4 {e and f formats} { + format "%020e %020e %020e %020e" 34.2e12 68.514 -.126 -16000. .000053 + } {000000003.420000e+13 000000006.851400e+01 -00000001.260000e-01 -00000001.600000e+04} + test format-3.5 {e and f formats} { + format "%7.1e %7.1e %7.1e %7.1e" 34.2e12 68.514 -.126 -16000. .000053 + } {3.4e+13 6.9e+01 -1.3e-01 -1.6e+04} + test format-3.6 {e and f formats} { + format "%f %f %f %f" 34.2e12 68.514 -.125 -16000. .000053 + } {34200000000000.000000 68.514000 -0.125000 -16000.000000} +} +test format-3.7 {e and f formats} {nonPortable} { + format "%.4f %.4f %.4f %.4f %.4f" 34.2e12 68.514 -.125 -16000. .000053 +} {34200000000000.0000 68.5140 -0.1250 -16000.0000 0.0001} +test format-3.8 {e and f formats} { + format "%.4e %.5e %.6e" -9.99996 -9.99996 9.99996 +} {-1.0000e+01 -9.99996e+00 9.999960e+00} +test format-3.9 {e and f formats} { + format "%.4f %.5f %.6f" -9.99996 -9.99996 9.99996 +} {-10.0000 -9.99996 9.999960} +test format-3.10 {e and f formats} { + format "%20f %-20f %020f" -9.99996 -9.99996 9.99996 +} { -9.999960 -9.999960 0000000000009.999960} +test format-3.11 {e and f formats} { + format "%-020f %020f" -9.99996 -9.99996 9.99996 +} {-9.999960 -000000000009.999960} +test format-3.12 {e and f formats} { + format "%.0e %#.0e" -9.99996 -9.99996 9.99996 +} {-1e+01 -1.e+01} +test format-3.13 {e and f formats} { + format "%.0f %#.0f" -9.99996 -9.99996 9.99996 +} {-10 -10.} +test format-3.14 {e and f formats} { + format "%.4f %.5f %.6f" -9.99996 -9.99996 9.99996 +} {-10.0000 -9.99996 9.999960} +test format-3.15 {e and f formats} { + format "%3.0f %3.0f %3.0f %3.0f" 1.0 1.1 1.01 1.001 +} { 1 1 1 1} +test format-3.16 {e and f formats} { + format "%3.1f %3.1f %3.1f %3.1f" 0.0 0.1 0.01 0.001 +} {0.0 0.1 0.0 0.0} + +test format-4.1 {g-format} { + format "%.3g" 12341.0 +} {1.23e+04} +test format-4.2 {g-format} { + format "%.3G" 1234.12345 +} {1.23E+03} +test format-4.3 {g-format} { + format "%.3g" 123.412345 +} {123} +test format-4.4 {g-format} { + format "%.3g" 12.3412345 +} {12.3} +test format-4.5 {g-format} { + format "%.3g" 1.23412345 +} {1.23} +test format-4.6 {g-format} { + format "%.3g" 1.23412345 +} {1.23} +test format-4.7 {g-format} { + format "%.3g" .123412345 +} {0.123} +test format-4.8 {g-format} { + format "%.3g" .012341 +} {0.0123} +test format-4.9 {g-format} { + format "%.3g" .0012341 +} {0.00123} +test format-4.10 {g-format} { + format "%.3g" .00012341 +} {0.000123} +test format-4.11 {g-format} { + format "%.3g" .00001234 +} {1.23e-05} +test format-4.12 {g-format} { + format "%.4g" 9999.6 +} {1e+04} +test format-4.13 {g-format} { + format "%.4g" 999.96 +} {1000} +test format-4.14 {g-format} { + format "%.3g" 1.0 +} {1} +test format-4.15 {g-format} { + format "%.3g" .1 +} {0.1} +test format-4.16 {g-format} { + format "%.3g" .01 +} {0.01} +test format-4.17 {g-format} { + format "%.3g" .001 +} {0.001} +test format-4.18 {g-format} { + format "%.3g" .00001 +} {1e-05} +test format-4.19 {g-format} { + format "%#.3g" 1234.0 +} {1.23e+03} +test format-4.20 {g-format} { + format "%#.3G" 9999.5 +} {1.00E+04} + +test format-5.1 {floating-point zeroes} { + format "%e %f %g" 0.0 0.0 0.0 0.0 +} {0.000000e+00 0.000000 0} +test format-5.2 {floating-point zeroes} { + format "%.4e %.4f %.4g" 0.0 0.0 0.0 0.0 +} {0.0000e+00 0.0000 0} +test format-5.3 {floating-point zeroes} { + format "%#.4e %#.4f %#.4g" 0.0 0.0 0.0 0.0 +} {0.0000e+00 0.0000 0.000} +test format-5.4 {floating-point zeroes} { + format "%.0e %.0f %.0g" 0.0 0.0 0.0 0.0 +} {0e+00 0 0} +test format-5.5 {floating-point zeroes} { + format "%#.0e %#.0f %#.0g" 0.0 0.0 0.0 0.0 +} {0.e+00 0. 0.} +test format-5.6 {floating-point zeroes} { + format "%3.0f %3.0f %3.0f %3.0f" 0.0 0.0 0.0 0.0 +} { 0 0 0 0} +test format-5.7 {floating-point zeroes} { + format "%3.0f %3.0f %3.0f %3.0f" 1.0 1.1 1.01 1.001 +} { 1 1 1 1} +test format-5.8 {floating-point zeroes} { + format "%3.1f %3.1f %3.1f %3.1f" 0.0 0.1 0.01 0.001 +} {0.0 0.1 0.0 0.0} + +test format-6.1 {various syntax features} { + format "%*.*f" 12 3 12.345678901 +} { 12.346} +test format-6.2 {various syntax features} { + format "%0*.*f" 12 3 12.345678901 +} {00000012.346} +test format-6.3 {various syntax features} { + format "\*\t\\n" +} {* \n} + +test format-7.1 {error conditions} { + catch format +} 1 +test format-7.2 {error conditions} { + catch format msg + set msg +} {wrong # args: should be "format formatString ?arg arg ...?"} +test format-7.3 {error conditions} { + catch {format %*d} +} 1 +test format-7.4 {error conditions} { + catch {format %*d} msg + set msg +} {not enough arguments for all format specifiers} +test format-7.5 {error conditions} { + catch {format %*.*f 12} +} 1 +test format-7.6 {error conditions} { + catch {format %*.*f 12} msg + set msg +} {not enough arguments for all format specifiers} +test format-7.7 {error conditions} { + catch {format %*.*f 12 3} +} 1 +test format-7.8 {error conditions} { + catch {format %*.*f 12 3} msg + set msg +} {not enough arguments for all format specifiers} +test format-7.9 {error conditions} { + list [catch {format %*d x 3} msg] $msg +} {1 {expected integer but got "x"}} +test format-7.10 {error conditions} { + list [catch {format %*.*f 2 xyz 3} msg] $msg +} {1 {expected integer but got "xyz"}} +test format-7.11 {error conditions} { + catch {format %d 2a} +} 1 +test format-7.12 {error conditions} { + catch {format %d 2a} msg + set msg +} {expected integer but got "2a"} +test format-7.13 {error conditions} { + catch {format %c 2x} +} 1 +test format-7.14 {error conditions} { + catch {format %c 2x} msg + set msg +} {expected integer but got "2x"} +test format-7.15 {error conditions} { + catch {format %f 2.1z} +} 1 +test format-7.16 {error conditions} { + catch {format %f 2.1z} msg + set msg +} {expected floating-point number but got "2.1z"} +test format-7.17 {error conditions} { + catch {format ab%} +} 1 +test format-7.18 {error conditions} { + catch {format ab% 12} msg + set msg +} {format string ended in middle of field specifier} +test format-7.19 {error conditions} { + catch {format %q x} +} 1 +test format-7.20 {error conditions} { + catch {format %q x} msg + set msg +} {bad field specifier "q"} +test format-7.21 {error conditions} { + catch {format %d} +} 1 +test format-7.22 {error conditions} { + catch {format %d} msg + set msg +} {not enough arguments for all format specifiers} +test format-7.23 {error conditions} { + catch {format "%d %d" 24 xyz} msg + set msg +} {expected integer but got "xyz"} + +test format-8.1 {long result} { + set a {1234567890abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 1 2 3 4 5 6 7 8 9 0 a b c d e f g h i j k l m n o p q r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z} + format {1111 2222 3333 4444 5555 6666 7777 8888 9999 aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz AAAA BBBB CCCC DDDD EEEE FFFF GGGG %s %s} $a $a +} {1111 2222 3333 4444 5555 6666 7777 8888 9999 aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz AAAA BBBB CCCC DDDD EEEE FFFF GGGG 1234567890abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 1 2 3 4 5 6 7 8 9 0 a b c d e f g h i j k l m n o p q r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1234567890abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 1 2 3 4 5 6 7 8 9 0 a b c d e f g h i j k l m n o p q r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z} + +test format-9.1 {"h" format specifier} {nonPortable} { + format %hd 0xffff +} -1 +test format-9.2 {"h" format specifier} {nonPortable} { + format %hx 0x10fff +} fff +test format-9.3 {"h" format specifier} {nonPortable} { + format %hd 0x10000 +} 0 + +test format-10.1 {XPG3 %$n specifiers} { + format {%2$d %1$d} 4 5 +} {5 4} +test format-10.2 {XPG3 %$n specifiers} { + format {%2$d %1$d %1$d %3$d} 4 5 6 +} {5 4 4 6} +test format-10.3 {XPG3 %$n specifiers} { + list [catch {format {%2$d %3$d} 4 5} msg] $msg +} {1 {"%n$" argument index out of range}} +test format-10.4 {XPG3 %$n specifiers} { + list [catch {format {%2$d %0$d} 4 5 6} msg] $msg +} {1 {"%n$" argument index out of range}} +test format-10.5 {XPG3 %$n specifiers} { + list [catch {format {%d %1$d} 4 5 6} msg] $msg +} {1 {cannot mix "%" and "%n$" conversion specifiers}} +test format-10.6 {XPG3 %$n specifiers} { + list [catch {format {%2$d %d} 4 5 6} msg] $msg +} {1 {cannot mix "%" and "%n$" conversion specifiers}} +test format-10.7 {XPG3 %$n specifiers} { + list [catch {format {%2$d %3d} 4 5 6} msg] $msg +} {1 {cannot mix "%" and "%n$" conversion specifiers}} +test format-10.8 {XPG3 %$n specifiers} { + format {%2$*d %3$d} 1 10 4 +} { 4 4} +test format-10.9 {XPG3 %$n specifiers} { + format {%2$.*s %4$d} 1 5 abcdefghijklmnop 44 +} {abcde 44} +test format-10.10 {XPG3 %$n specifiers} { + list [catch {format {%2$*d} 4} msg] $msg +} {1 {"%n$" argument index out of range}} +test format-10.11 {XPG3 %$n specifiers} { + list [catch {format {%2$*d} 4 5} msg] $msg +} {1 {"%n$" argument index out of range}} +test format-10.12 {XPG3 %$n specifiers} { + list [catch {format {%2$*d} 4 5 6} msg] $msg +} {0 { 6}} + +test format-11.1 {negative width specifiers} { + format "%*d" -47 25 +} {25} +test format-12.1 {tcl_precision fuzzy comparison} { + catch {unset a} + catch {unset b} + catch {unset c} + catch {unset d} + set a 0.0000000000001 + set b 0.00000000000001 + set c 0.00000000000000001 + set d [expr $a + $b + $c] + format {%0.10f %0.12f %0.15f %0.17f} $d $d $d $d +} {0.0000000000 0.000000000000 0.000000000000110 0.00000000000011001} +test format-12.2 {tcl_precision fuzzy comparison} { + catch {unset a} + catch {unset b} + catch {unset c} + catch {unset d} + set a 0.000000000001 + set b 0.000000000000005 + set c 0.0000000000000008 + set d [expr $a + $b + $c] + format {%0.10f %0.12f %0.15f %0.17f} $d $d $d $d +} {0.0000000000 0.000000000001 0.000000000001006 0.00000000000100580} +test format-12.3 {tcl_precision fuzzy comparison} { + catch {unset a} + catch {unset b} + catch {unset c} + set a 0.00000000000099 + set b 0.000000000000011 + set c [expr $a + $b] + format {%0.10f %0.12f %0.15f %0.17f} $c $c $c $c +} {0.0000000000 0.000000000001 0.000000000001001 0.00000000000100100} +test format-12.4 {tcl_precision fuzzy comparison} { + catch {unset a} + catch {unset b} + catch {unset c} + set a 0.444444444444 + set b 0.33333333333333 + set c [expr $a + $b] + format {%0.10f %0.12f %0.15f %0.16f} $c $c $c $c +} {0.7777777778 0.777777777777 0.777777777777330 0.7777777777773300} +test format-12.5 {tcl_precision fuzzy comparison} { + catch {unset a} + catch {unset b} + catch {unset c} + set a 0.444444444444 + set b 0.99999999999999 + set c [expr $a + $b] + format {%0.10f %0.12f %0.15f} $c $c $c +} {1.4444444444 1.444444444444 1.444444444443990} +test format-13.1 {testing MAX_FLOAT_SIZE for 0 and 1} { + format {%s} "" +} {} +test format-13.2 {testing MAX_FLOAT_SIZE for 0 and 1} { + format {%s} "a" +} {a} + +set a "0123456789" +set b "" +for {set i 0} {$i < 290} {incr i} { + append b $a +} +for {set i 290} {$i < 400} {incr i} { + test format-14.[expr $i -290] {testing MAX_FLOAT_SIZE} { + format {%s} $b + } $b + append b "x" +} + + +catch {unset a} +catch {unset b} +catch {unset c} +catch {unset d} +return diff --git a/tests/get.test b/tests/get.test new file mode 100644 index 0000000..5155b95 --- /dev/null +++ b/tests/get.test @@ -0,0 +1,91 @@ +# Commands covered: none +# +# This file contains a collection of tests for the procedures in the +# file tclGet.c. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) get.test 1.7 97/10/31 17:23:00 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test get-1.1 {Tcl_GetInt procedure} { + set x 44 + incr x { 22} +} {66} +test get-1.2 {Tcl_GetInt procedure} { + set x 44 + incr x -3 +} {41} +test get-1.3 {Tcl_GetInt procedure} { + set x 44 + incr x +8 +} {52} +test get-1.4 {Tcl_GetInt procedure} { + set x 44 + list [catch {incr x foo} msg] $msg +} {1 {expected integer but got "foo"}} +test get-1.5 {Tcl_GetInt procedure} { + set x 44 + list [catch {incr x {16 }} msg] $msg +} {0 60} +test get-1.6 {Tcl_GetInt procedure} { + set x 44 + list [catch {incr x {16 x}} msg] $msg +} {1 {expected integer but got "16 x"}} + +# The following tests are non-portable because they depend on +# word size. 18446744073709551614 + +if {0x80000000 > 0} { + test get-1.7 {Tcl_GetInt procedure} {nonPortable unixOnly} { + set x 44 + list [catch {incr x 18446744073709551616} msg] $msg $errorCode + } {1 {integer value too large to represent} {ARITH IOVERFLOW {integer value too large to represent}}} + test get-1.8 {Tcl_GetInt procedure} {nonPortable} { + set x 0 + list [catch {incr x 18446744073709551614} msg] $msg + } {0 -2} + test get-1.9 {Tcl_GetInt procedure} {nonPortable} { + set x 0 + list [catch {incr x +18446744073709551614} msg] $msg + } {0 -2} + test get-1.10 {Tcl_GetInt procedure} {nonPortable} { + set x 0 + list [catch {incr x -18446744073709551614} msg] $msg + } {0 2} +} else { + test get-1.7 {Tcl_GetInt procedure} {nonPortable unixOnly} { + set x 44 + list [catch {incr x 4294967296} msg] $msg $errorCode + } {1 {integer value too large to represent} {ARITH IOVERFLOW {integer value too large to represent}}} + test get-1.8 {Tcl_GetInt procedure} {nonPortable} { + set x 0 + list [catch {incr x 4294967294} msg] $msg + } {0 -2} + test get-1.9 {Tcl_GetInt procedure} {nonPortable} { + set x 0 + list [catch {incr x +4294967294} msg] $msg + } {0 -2} + test get-1.10 {Tcl_GetInt procedure} {nonPortable} { + set x 0 + list [catch {incr x -4294967294} msg] $msg + } {0 2} +} + +test get-2.1 {Tcl_GetInt procedure} { + format %g 1.23 +} {1.23} +test get-2.2 {Tcl_GetInt procedure} { + format %g { 1.23 } +} {1.23} +test get-2.3 {Tcl_GetInt procedure} { + list [catch {format %g clip} msg] $msg +} {1 {expected floating-point number but got "clip"}} +test get-2.4 {Tcl_GetInt procedure} {nonPortable} { + list [catch {format %g .000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001} msg] $msg $errorCode +} {1 {floating-point value too small to represent} {ARITH UNDERFLOW {floating-point value too small to represent}}} diff --git a/tests/history.test b/tests/history.test new file mode 100644 index 0000000..498fb2e --- /dev/null +++ b/tests/history.test @@ -0,0 +1,211 @@ +# Commands covered: history +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) history.test 1.15 97/08/13 14:37:10 + +if {[catch {history}]} { + puts stdout "This version of Tcl was built without the history command;\n" + puts stdout "history tests will be skipped.\n" + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +set num [history nextid] +history keep 3 +history add {set a 12345} +history add {set b [format {A test %s} string]} +history add {Another test} + +# "history event" + +test history-1.1 {event option} {history event -1} \ + {set b [format {A test %s} string]} +test history-1.2 {event option} {history event $num} \ + {set a 12345} +test history-1.3 {event option} {history event [expr $num+2]} \ + {Another test} +test history-1.4 {event option} {history event set} \ + {set b [format {A test %s} string]} +test history-1.5 {event option} {history e "* a*"} \ + {set a 12345} +test history-1.6 {event option} {catch {history event *gorp} msg} 1 +test history-1.7 {event option} { + catch {history event *gorp} msg + set msg +} {no event matches "*gorp"} +test history-1.8 {event option} {history event} \ + {set b [format {A test %s} string]} +test history-1.9 {event option} {catch {history event 123 456} msg} 1 +test history-1.10 {event option} { + catch {history event 123 456} msg + set msg +} {wrong # args: should be "history event ?event?"} + +# "history redo" + +set a 0 +history redo -2 +test history-2.1 {redo option} {set a} 12345 +set b 0 +history redo +test history-2.2 {redo option} {set b} {A test string} +test history-2.3 {redo option} {catch {history redo -3 -4}} 1 +test history-2.4 {redo option} { + catch {history redo -3 -4} msg + set msg +} {wrong # args: should be "history redo ?event?"} + +# "history add" + +history add "set a 444" exec +test history-3.1 {add option} {set a} 444 +test history-3.2 {add option} {catch {history add "set a 444" execGorp}} 1 +test history-3.3 {add option} { + catch {history add "set a 444" execGorp} msg + set msg +} {bad argument "execGorp": should be "exec"} +test history-3.4 {add option} {catch {history add "set a 444" a} msg} 1 +test history-3.5 {add option} { + catch {history add "set a 444" a} msg + set msg +} {bad argument "a": should be "exec"} +history add "set a 555" e +test history-3.6 {add option} {set a} 555 +history add "set a 666" +test history-3.7 {add option} {set a} 555 +test history-3.8 {add option} {catch {history add "set a 666" e f} msg} 1 +test history-3.9 {add option} { + catch {history add "set a 666" e f} msg + set msg +} {wrong # args: should be "history add event ?exec?"} + +# "history change" + +history change "A test value" +test history-4.1 {change option} {history event [expr {[history n]-1}]} \ + "A test value" +history ch "Another test" -1 +test history-4.2 {change option} {history e} "Another test" +test history-4.3 {change option} {history event [expr {[history n]-1}]} \ + "A test value" +test history-4.4 {change option} {catch {history change Foo 4 10}} 1 +test history-4.5 {change option} { + catch {history change Foo 4 10} msg + set msg +} {wrong # args: should be "history change newValue ?event?"} +test history-4.6 {change option} { + catch {history change Foo [expr {[history n]-4}]} +} 1 +set num [expr {[history n]-4}] +test history-4.7 {change option} { + catch {history change Foo $num} msg + set msg +} "event \"$num\" is too far in the past" + +# "history info" + +set num [history n] +history add set\ a\ {b\nc\ d\ e} +history add {set b 1234} +history add set\ c\ {a\nb\nc} +test history-5.1 {info option} {history info} [format {%6d set a {b + c d e} +%6d set b 1234 +%6d set c {a + b + c}} $num [expr $num+1] [expr $num+2]] +test history-5.2 {info option} {history i 2} [format {%6d set b 1234 +%6d set c {a + b + c}} [expr $num+1] [expr $num+2]] +test history-5.3 {info option} {catch {history i 2 3}} 1 +test history-5.4 {info option} { + catch {history i 2 3} msg + set msg +} {wrong # args: should be "history info ?count?"} +test history-5.5 {info option} {history} [format {%6d set a {b + c d e} +%6d set b 1234 +%6d set c {a + b + c}} $num [expr $num+1] [expr $num+2]] + +# "history keep" + +history add "foo1" +history add "foo2" +history add "foo3" +history keep 2 +test history-6.1 {keep option} {history event [expr [history n]-1]} foo3 +test history-6.2 {keep option} {history event -1} foo2 +test history-6.3 {keep option} {catch {history event -3}} 1 +test history-6.4 {keep option} { + catch {history event -3} msg + set msg +} {event "-3" is too far in the past} +history k 5 +test history-6.5 {keep option} {history event -1} foo2 +test history-6.6 {keep option} {history event -2} {} +test history-6.7 {keep option} {history event -3} {} +test history-6.8 {keep option} {history event -4} {} +test history-6.9 {keep option} {catch {history event -5}} 1 +test history-6.10 {keep option} {catch {history keep 4 6}} 1 +test history-6.11 {keep option} { + catch {history keep 4 6} msg + set msg +} {wrong # args: should be "history keep ?count?"} +test history-6.12 {keep option} {catch {history keep}} 0 +test history-6.13 {keep option} { + history keep +} {5} +test history-6.14 {keep option} {catch {history keep -3}} 1 +test history-6.15 {keep option} { + catch {history keep -3} msg + set msg +} {illegal keep count "-3"} +test history-6.16 {keep option} { + catch {history keep butter} msg + set msg +} {illegal keep count "butter"} + +# "history nextid" + +set num [history n] +history add "Testing" +history add "Testing2" +test history-7.1 {nextid option} {history event} "Testing" +test history-7.2 {nextid option} {history next} [expr $num+2] +test history-7.3 {nextid option} {catch {history nextid garbage}} 1 +test history-7.4 {nextid option} { + catch {history nextid garbage} msg + set msg +} {wrong # args: should be "history nextid"} + +# "history clear" + +set num [history n] +history add "Testing" +history add "Testing2" +test history-8.1 {clear option} {catch {history clear junk}} 1 +test history-8.2 {clear option} {history clear} {} +history add "Testing" +test history-8.3 {clear option} {history} { 1 Testing} + +# miscellaneous + +test history-9.1 {miscellaneous} {catch {history gorp} msg} 1 +test history-9.2 {miscellaneous} { + catch {history gorp} msg + set msg +} {bad option "gorp": must be add, change, clear, event, info, keep, nextid, or redo} + diff --git a/tests/http.test b/tests/http.test new file mode 100644 index 0000000..2770e13 --- /dev/null +++ b/tests/http.test @@ -0,0 +1,409 @@ +# Commands covered: http::config, http::geturl, http::wait, http::reset +# +# This file contains a collection of tests for the http script library. +# Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# +# SCCS: @(#) http2.test 1.8 97/08/13 11:16:50 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {[catch {package require http 2.0}]} { + if {[info exist http2]} { + catch {puts stderr "Cannot load http 2.0 package"} + return + } else { + catch {puts stderr "Running http 2.0 tests in slave interp"} + set interp [interp create http2] + $interp eval [list set http2 "running"] + $interp eval [list source [info script]] + interp delete $interp + return + } +} + +############### The httpd_ procedures implement a stub http server. ######## +proc httpd_init {{port 8015}} { + socket -server httpdAccept $port +} +proc httpd_log {args} { + global httpLog + if {[info exists httpLog] && $httpLog} { + puts stderr "httpd: [join $args { }]" + } +} +array set httpdErrors { + 204 {No Content} + 400 {Bad Request} + 404 {Not Found} + 503 {Service Unavailable} + 504 {Service Temporarily Unavailable} + } + +proc httpdError {sock code args} { + global httpdErrors + puts $sock "$code $httpdErrors($code)" + httpd_log "error: [join $args { }]" +} +proc httpdAccept {newsock ipaddr port} { + global httpd + upvar #0 httpd$newsock data + + fconfigure $newsock -blocking 0 -translation {auto crlf} + httpd_log $newsock Connect $ipaddr $port + set data(ipaddr) $ipaddr + fileevent $newsock readable [list httpdRead $newsock] +} + +# read data from a client request + +proc httpdRead { sock } { + upvar #0 httpd$sock data + + set readCount [gets $sock line] + if {![info exists data(state)]} { + if [regexp {(POST|GET|HEAD) ([^?]+)\??([^ ]*) HTTP/1.0} \ + $line x data(proto) data(url) data(query)] { + set data(state) mime + httpd_log $sock Query $line + } else { + httpdError $sock 400 + httpd_log $sock Error "bad first line:$line" + httpdSockDone $sock + } + return + } + + # string compare $readCount 0 maps -1 to -1, 0 to 0, and > 0 to 1 + + set state [string compare $readCount 0],$data(state),$data(proto) + httpd_log $sock $state + switch -- $state { + -1,mime,HEAD - + -1,mime,GET - + -1,mime,POST { + # gets would block + return + } + 0,mime,HEAD - + 0,mime,GET - + 0,query,POST { httpdRespond $sock } + 0,mime,POST { set data(state) query } + 1,mime,HEAD - + 1,mime,POST - + 1,mime,GET { + if [regexp {([^:]+):[ ]*(.*)} $line dummy key value] { + set data(mime,[string tolower $key]) $value + } + } + 1,query,POST { + append data(query) $line + httpdRespond $sock + } + default { + if [eof $sock] { + httpd_log $sock Error "unexpected eof on <$data(url)> request" + } else { + httpd_log $sock Error "unhandled state <$state> fetching <$data(url)>" + } + httpdError $sock 404 + httpdSockDone $sock + } + } +} +proc httpdSockDone { sock } { +upvar #0 httpd$sock data + unset data + close $sock +} + +# Respond to the query. + +set bindata "This is binary data\x0d\x0amore\x0dmore\x0amore\x00null" +proc httpdRespond { sock } { + global httpd bindata port + upvar #0 httpd$sock data + + if {[string match *binary* $data(url)]} { + set html "$bindata[info hostname]:$port$data(url)" + set type application/octet-stream + } else { + set type text/html + + set html "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>$data(proto) $data(url)</h2> +" + if {[info exists data(query)] && [string length $data(query)]} { + append html "<h2>Query</h2>\n<dl>\n" + foreach {key value} [split $data(query) &=] { + append html "<dt>$key<dd>$value\n" + } + append html </dl>\n + } + append html </body></html> + } + + if {$data(proto) == "HEAD"} { + puts $sock "HTTP/1.0 200 OK" + } else { + puts $sock "HTTP/1.0 200 Data follows" + } + puts $sock "Date: [clock format [clock clicks]]" + puts $sock "Content-Type: $type" + puts $sock "Content-Length: [string length $html]" + puts $sock "" + if {$data(proto) != "HEAD"} { + fconfigure $sock -translation binary + puts -nonewline $sock $html + } + httpd_log $sock Done "" + httpdSockDone $sock +} +##################### end server ########################### + +set port 8010 +if [catch {httpd_init $port} listen] { + puts stderr "Cannot start http server, http test skipped" + unset port + return +} + +test http-1.1 {http::config} { + http::config +} {-accept */* -proxyfilter http::ProxyRequired -proxyhost {} -proxyport {} -useragent {Tcl http client package 2.0}} + +test http-1.2 {http::config} { + http::config -proxyfilter +} http::ProxyRequired + +test http-1.3 {http::config} { + catch {http::config -junk} +} 1 + +test http-1.4 {http::config} { + set savedconf [http::config] + http::config -proxyhost nowhere.come -proxyport 8080 -proxyfilter myFilter -useragent "Tcl Test Suite" + set x [http::config] + eval http::config $savedconf + set x +} {-accept */* -proxyfilter myFilter -proxyhost nowhere.come -proxyport 8080 -useragent {Tcl Test Suite}} + +test http-1.5 {http::config} { + catch {http::config -proxyhost {} -junk 8080} +} 1 + +test http-2.1 {http::reset} { + catch {http::reset http#1} +} 0 + +test http-3.1 {http::geturl} { + catch {http::geturl -bogus flag} +} 1 +test http-3.2 {http::geturl} { + catch {http::geturl http:junk} err + set err +} {Unsupported URL: http:junk} + +set url [info hostname]:$port +test http-3.3 {http::geturl} { + set token [http::geturl $url] + http::data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET /</h2> +</body></html>" + +set tail /a/b/c +set url [info hostname]:$port/a/b/c +set binurl [info hostname]:$port/binary + +test http-3.4 {http::geturl} { + set token [http::geturl $url] + http::data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET $tail</h2> +</body></html>" + +proc selfproxy {host} { + global port + return [list [info hostname] $port] +} +test http-3.5 {http::geturl} { + http::config -proxyfilter selfproxy + set token [http::geturl $url] + http::config -proxyfilter http::ProxyRequired + http::data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET http://$url</h2> +</body></html>" + +test http-3.6 {http::geturl} { + http::config -proxyfilter bogus + set token [http::geturl $url] + http::config -proxyfilter http::ProxyRequired + http::data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET $tail</h2> +</body></html>" + +test http-3.7 {http::geturl} { + set token [http::geturl $url -headers {Pragma no-cache}] + http::data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET $tail</h2> +</body></html>" + +test http-3.8 {http::geturl} { + set token [http::geturl $url -query Name=Value&Foo=Bar] + http::data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>POST $tail</h2> +<h2>Query</h2> +<dl> +<dt>Name<dd>Value +<dt>Foo<dd>Bar +</dl> +</body></html>" + +test http-3.9 {http::geturl} { + set token [http::geturl $url -validate 1] + http::code $token +} "HTTP/1.0 200 OK" + + +test http-4.1 {http::Event} { + set token [http::geturl $url] + upvar #0 $token data + array set meta $data(meta) + expr ($data(totalsize) == $meta(Content-Length)) +} 1 + +test http-4.2 {http::Event} { + set token [http::geturl $url] + upvar #0 $token data + array set meta $data(meta) + string compare $data(type) [string trim $meta(Content-Type)] +} 0 + +test http-4.3 {http::Event} { + set token [http::geturl $url] + http::code $token +} {HTTP/1.0 200 Data follows} + +test http-4.4 {http::Event} { + set out [open testfile w] + set token [http::geturl $url -channel $out] + close $out + set in [open testfile] + set x [read $in] + close $in + file delete testfile + set x +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET $tail</h2> +</body></html>" + +test http-4.5 {http::Event} { + set out [open testfile w] + set token [http::geturl $url -channel $out] + close $out + upvar #0 $token data + file delete testfile + expr $data(currentsize) == $data(totalsize) +} 1 + +test http-4.6 {http::Event} { + set out [open testfile w] + set token [http::geturl $binurl -channel $out] + close $out + set in [open testfile] + fconfigure $in -translation binary + set x [read $in] + close $in + file delete testfile + set x +} "$bindata$binurl" + +proc myProgress {token total current} { + global progress httpLog + if {[info exists httpLog] && $httpLog} { + puts "progress $total $current" + } + set progress [list $total $current] +} +if 0 { + # This test hangs on Windows95 because the client never gets EOF + set httpLog 1 + test http-4.6 {http::Event} { + set token [http::geturl $url -blocksize 50 -progress myProgress] + set progress + } {111 111} +} +test http-4.7 {http::Event} { + set token [http::geturl $url -progress myProgress] + set progress +} {111 111} +test http-4.8 {http::Event} { + set token [http::geturl $url] + http::status $token +} {ok} +test http-4.9 {http::Event} { + set token [http::geturl $url -progress myProgress] + http::code $token +} {HTTP/1.0 200 Data follows} +test http-4.10 {http::Event} { + set token [http::geturl $url -progress myProgress] + http::size $token +} {111} +test http-4.11 {http::Event} { + set token [http::geturl $url -timeout 1 -command {#}] + http::reset $token + http::status $token +} {reset} +test http-4.12 {http::Event} { + set token [http::geturl $url -timeout 1 -command {#}] + http::wait $token + http::status $token +} {timeout} + +test http-5.1 {http::formatQuery} { + http::formatQuery name1 value1 name2 "value two" +} {name1=value1&name2=value+two} + +test http-5.2 {http::formatQuery} { + http::formatQuery name1 ~bwelch name2 \xa1\xa2\xa2 +} {name1=%7ebwelch&name2=%a1%a2%a2} + +test http-5.3 {http::formatQuery} { + http::formatQuery lines "line1\nline2\nline3" +} {lines=line1%0d%0aline2%0d%0aline3} + +test http-6.1 {http::ProxyRequired} { + http::config -proxyhost [info hostname] -proxyport $port + set token [http::geturl $url] + http::wait $token + http::config -proxyhost {} -proxyport {} + upvar #0 $token data + set data(body) +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET http://$url</h2> +</body></html>" + +unset url +unset port +close $listen diff --git a/tests/httpold.test b/tests/httpold.test new file mode 100644 index 0000000..5e9ba0c --- /dev/null +++ b/tests/httpold.test @@ -0,0 +1,411 @@ +# Commands covered: http_config, http_get, http_wait, http_reset +# +# This file contains a collection of tests for the http script library. +# Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) http.test 1.12 97/07/29 17:04:12 + +if {[string compare test [info procs test]] == 1} then {source defs} + + +if {[catch {package require http 1.0}]} { + if {[info exist httpold]} { + catch {puts stderr "Cannot load http 1.0 package"} + return + } else { + catch {puts stderr "Running http 1.0 tests in slave interp"} + set interp [interp create httpold] + $interp eval [list set httpold "running"] + $interp eval [list source [info script]] + interp delete $interp + return + } +} + +############### The httpd_ procedures implement a stub http server. ######## +proc httpd_init {{port 8015}} { + socket -server httpdAccept $port +} +proc httpd_log {args} { + global httpLog + if {[info exists httpLog] && $httpLog} { + puts stderr "httpd: [join $args { }]" + } +} +array set httpdErrors { + 204 {No Content} + 400 {Bad Request} + 404 {Not Found} + 503 {Service Unavailable} + 504 {Service Temporarily Unavailable} + } + +proc httpdError {sock code args} { + global httpdErrors + puts $sock "$code $httpdErrors($code)" + httpd_log "error: [join $args { }]" +} +proc httpdAccept {newsock ipaddr port} { + global httpd + upvar #0 httpd$newsock data + + fconfigure $newsock -blocking 0 -translation {auto crlf} + httpd_log $newsock Connect $ipaddr $port + set data(ipaddr) $ipaddr + fileevent $newsock readable [list httpdRead $newsock] +} + +# read data from a client request + +proc httpdRead { sock } { + upvar #0 httpd$sock data + + set readCount [gets $sock line] + if {![info exists data(state)]} { + if [regexp {(POST|GET|HEAD) ([^?]+)\??([^ ]*) HTTP/1.0} \ + $line x data(proto) data(url) data(query)] { + set data(state) mime + httpd_log $sock Query $line + } else { + httpdError $sock 400 + httpd_log $sock Error "bad first line:$line" + httpdSockDone $sock + } + return + } + + # string compare $readCount 0 maps -1 to -1, 0 to 0, and > 0 to 1 + + set state [string compare $readCount 0],$data(state),$data(proto) + httpd_log $sock $state + switch -- $state { + -1,mime,HEAD - + -1,mime,GET - + -1,mime,POST { + # gets would block + return + } + 0,mime,HEAD - + 0,mime,GET - + 0,query,POST { httpdRespond $sock } + 0,mime,POST { set data(state) query } + 1,mime,HEAD - + 1,mime,POST - + 1,mime,GET { + if [regexp {([^:]+):[ ]*(.*)} $line dummy key value] { + set data(mime,[string tolower $key]) $value + } + } + 1,query,POST { + append data(query) $line + httpdRespond $sock + } + default { + if [eof $sock] { + httpd_log $sock Error "unexpected eof on <$data(url)> request" + } else { + httpd_log $sock Error "unhandled state <$state> fetching <$data(url)>" + } + httpdError $sock 404 + httpdSockDone $sock + } + } +} +proc httpdSockDone { sock } { +upvar #0 httpd$sock data + unset data + catch {close $sock} +} + +# Respond to the query. + +set bindata "This is binary data\x0d\x0amore\x0dmore\x0amore\x00null" +proc httpdRespond { sock } { + global httpd bindata port + upvar #0 httpd$sock data + + if {[string match *binary* $data(url)]} { + set html "$bindata[info hostname]:$port$data(url)" + set type application/octet-stream + } else { + set type text/html + + set html "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>$data(proto) $data(url)</h2> +" + if {[info exists data(query)] && [string length $data(query)]} { + append html "<h2>Query</h2>\n<dl>\n" + foreach {key value} [split $data(query) &=] { + append html "<dt>$key<dd>$value\n" + } + append html </dl>\n + } + append html </body></html> + } + + if {$data(proto) == "HEAD"} { + puts $sock "HTTP/1.0 200 OK" + } else { + puts $sock "HTTP/1.0 200 Data follows" + } + puts $sock "Date: [clock format [clock clicks]]" + puts $sock "Content-Type: $type" + puts $sock "Content-Length: [string length $html]" + puts $sock "" + if {$data(proto) != "HEAD"} { + fconfigure $sock -translation binary + puts -nonewline $sock $html + } + httpd_log $sock Done "" + httpdSockDone $sock +} +##################### end server ########################### + +set port 8010 +if [catch {httpd_init $port} listen] { + puts stderr "Cannot start http server, http test skipped" + unset port + return +} + +test http-1.1 {http_config} { + http_config +} {-accept */* -proxyfilter httpProxyRequired -proxyhost {} -proxyport {} -useragent {Tcl http client package 1.0}} + +test http-1.2 {http_config} { + http_config -proxyfilter +} httpProxyRequired + +test http-1.3 {http_config} { + catch {http_config -junk} +} 1 + +test http-1.4 {http_config} { + http_config -proxyhost nowhere.come -proxyport 8080 -proxyfilter myFilter -useragent "Tcl Test Suite" + set x [http_config] + http_config -proxyhost {} -proxyport {} -proxyfilter httpProxyRequired \ + -useragent "Tcl http client package 1.0" + set x +} {-accept */* -proxyfilter myFilter -proxyhost nowhere.come -proxyport 8080 -useragent {Tcl Test Suite}} + +test http-1.5 {http_config} { + catch {http_config -proxyhost {} -junk 8080} +} 1 + +test http-2.1 {http_reset} { + catch {http_reset http#1} +} 0 + +test http-3.1 {http_get} { + catch {http_get -bogus flag} +} 1 +test http-3.2 {http_get} { + catch {http_get http:junk} err + set err +} {Unsupported URL: http:junk} + +set url [info hostname]:$port +test http-3.3 {http_get} { + set token [http_get $url] + http_data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET /</h2> +</body></html>" + +set tail /a/b/c +set url [info hostname]:$port/a/b/c +set binurl [info hostname]:$port/binary + +test http-3.4 {http_get} { + set token [http_get $url] + http_data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET $tail</h2> +</body></html>" + +proc selfproxy {host} { + global port + return [list [info hostname] $port] +} +test http-3.5 {http_get} { + http_config -proxyfilter selfproxy + set token [http_get $url] + http_config -proxyfilter httpProxyRequired + http_data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET http://$url</h2> +</body></html>" + +test http-3.6 {http_get} { + http_config -proxyfilter bogus + set token [http_get $url] + http_config -proxyfilter httpProxyRequired + http_data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET $tail</h2> +</body></html>" + +test http-3.7 {http_get} { + set token [http_get $url -headers {Pragma no-cache}] + http_data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET $tail</h2> +</body></html>" + +test http-3.8 {http_get} { + set token [http_get $url -query Name=Value&Foo=Bar] + http_data $token +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>POST $tail</h2> +<h2>Query</h2> +<dl> +<dt>Name<dd>Value +<dt>Foo<dd>Bar +</dl> +</body></html>" + +test http-3.9 {http_get} { + set token [http_get $url -validate 1] + http_code $token +} "HTTP/1.0 200 OK" + + +test http-4.1 {httpEvent} { + set token [http_get $url] + upvar #0 $token data + array set meta $data(meta) + expr ($data(totalsize) == $meta(Content-Length)) +} 1 + +test http-4.2 {httpEvent} { + set token [http_get $url] + upvar #0 $token data + array set meta $data(meta) + string compare $data(type) [string trim $meta(Content-Type)] +} 0 + +test http-4.3 {httpEvent} { + set token [http_get $url] + http_code $token +} {HTTP/1.0 200 Data follows} + +test http-4.4 {httpEvent} { + set out [open testfile w] + set token [http_get $url -channel $out] + close $out + set in [open testfile] + set x [read $in] + close $in + file delete testfile + set x +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET $tail</h2> +</body></html>" + +test http-4.5 {httpEvent} { + set out [open testfile w] + set token [http_get $url -channel $out] + close $out + upvar #0 $token data + file delete testfile + expr $data(currentsize) == $data(totalsize) +} 1 + +test http-4.6 {httpEvent} { + set out [open testfile w] + set token [http_get $binurl -channel $out] + close $out + set in [open testfile] + fconfigure $in -translation binary + set x [read $in] + close $in + file delete testfile + set x +} "$bindata$binurl" + +proc myProgress {token total current} { + global progress httpLog + if {[info exists httpLog] && $httpLog} { + puts "progress $total $current" + } + set progress [list $total $current] +} +if 0 { + # This test hangs on Windows95 because the client never gets EOF + set httpLog 1 + test http-4.6 {httpEvent} { + set token [http_get $url -blocksize 50 -progress myProgress] + set progress + } {111 111} +} +test http-4.7 {httpEvent} { + set token [http_get $url -progress myProgress] + set progress +} {111 111} +test http-4.8 {httpEvent} { + set token [http_get $url] + http_status $token +} {ok} +test http-4.9 {httpEvent} { + set token [http_get $url -progress myProgress] + http_code $token +} {HTTP/1.0 200 Data follows} +test http-4.10 {httpEvent} { + set token [http_get $url -progress myProgress] + http_size $token +} {111} +test http-4.11 {httpEvent} { + set token [http_get $url -timeout 1 -command {#}] + http_reset $token + http_status $token +} {reset} +test http-4.12 {httpEvent} { + update + set token [http_get $url -timeout 1 -command {#}] + update + http_status $token +} {timeout} + +test http-5.1 {http_formatQuery} { + http_formatQuery name1 value1 name2 "value two" +} {name1=value1&name2=value+two} + +test http-5.2 {http_formatQuery} { + http_formatQuery name1 ~bwelch name2 \xa1\xa2\xa2 +} {name1=%7ebwelch&name2=%a1%a2%a2} + +test http-5.3 {http_formatQuery} { + http_formatQuery lines "line1\nline2\nline3" +} {lines=line1%0d%0aline2%0d%0aline3} + +test http-6.1 {httpProxyRequired} { + update + http_config -proxyhost [info hostname] -proxyport $port + set token [http_get $url] + http_wait $token + http_config -proxyhost {} -proxyport {} + upvar #0 $token data + set data(body) +} "<html><head><title>HTTP/1.0 TEST</title></head><body> +<h1>Hello, World!</h1> +<h2>GET http://$url</h2> +</body></html>" + +unset url +unset port +close $listen diff --git a/tests/if-old.test b/tests/if-old.test new file mode 100644 index 0000000..abade28 --- /dev/null +++ b/tests/if-old.test @@ -0,0 +1,156 @@ +# Commands covered: if +# +# This file contains the original set of tests for Tcl's if command. +# Since the if command is now compiled, a new set of tests covering +# the new implementation is in the file "if.test". Sourcing this file +# into Tcl runs the tests and generates output for errors. +# No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) if-old.test 1.10 96/10/22 11:33:06 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test if-old-1.1 {taking proper branch} { + set a {} + if 0 {set a 1} else {set a 2} + set a +} 2 +test if-old-1.2 {taking proper branch} { + set a {} + if 1 {set a 1} else {set a 2} + set a +} 1 +test if-old-1.3 {taking proper branch} { + set a {} + if 1<2 {set a 1} + set a +} 1 +test if-old-1.4 {taking proper branch} { + set a {} + if 1>2 {set a 1} + set a +} {} +test if-old-1.5 {taking proper branch} { + set a {} + if 0 {set a 1} else {} + set a +} {} +test if-old-1.5 {taking proper branch} { + set a {} + if 0 {set a 1} elseif 1 {set a 2} elseif 1 {set a 3} else {set a 4} + set a +} {2} +test if-old-1.6 {taking proper branch} { + set a {} + if 0 {set a 1} elseif 0 {set a 2} elseif 1 {set a 3} else {set a 4} + set a +} {3} +test if-old-1.7 {taking proper branch} { + set a {} + if 0 {set a 1} elseif 0 {set a 2} elseif 0 {set a 3} else {set a 4} + set a +} {4} +test if-old-1.8 {taking proper branch, multiline test expr} { + set a {} + if {($tcl_platform(platform) != "foobar1") && \ + ($tcl_platform(platform) != "foobar2")} {set a 3} else {set a 4} + set a +} {3} + + +test if-old-2.1 {optional then-else args} { + set a 44 + if 0 then {set a 1} elseif 0 then {set a 3} else {set a 2} + set a +} 2 +test if-old-2.2 {optional then-else args} { + set a 44 + if 1 then {set a 1} else {set a 2} + set a +} 1 +test if-old-2.3 {optional then-else args} { + set a 44 + if 0 {set a 1} else {set a 2} + set a +} 2 +test if-old-2.4 {optional then-else args} { + set a 44 + if 1 {set a 1} else {set a 2} + set a +} 1 +test if-old-2.5 {optional then-else args} { + set a 44 + if 0 then {set a 1} {set a 2} + set a +} 2 +test if-old-2.6 {optional then-else args} { + set a 44 + if 1 then {set a 1} {set a 2} + set a +} 1 +test if-old-2.7 {optional then-else args} { + set a 44 + if 0 then {set a 1} else {set a 2} + set a +} 2 +test if-old-2.8 {optional then-else args} { + set a 44 + if 0 then {set a 1} elseif 0 {set a 2} elseif 0 {set a 3} {set a 4} + set a +} 4 + +test if-old-3.1 {return value} { + if 1 then {set a 22; concat abc} +} abc +test if-old-3.2 {return value} { + if 0 then {set a 22; concat abc} elseif 1 {concat def} {concat ghi} +} def +test if-old-3.3 {return value} { + if 0 then {set a 22; concat abc} else {concat def} +} def +test if-old-3.4 {return value} { + if 0 then {set a 22; concat abc} +} {} +test if-old-3.5 {return value} { + if 0 then {set a 22; concat abc} elseif 0 {concat def} +} {} + +test if-old-4.1 {error conditions} { + list [catch {if} msg] $msg +} {1 {wrong # args: no expression after "if" argument}} +test if-old-4.2 {error conditions} { + list [catch {if {[error "error in condition"]} foo} msg] $msg +} {1 {error in condition}} +test if-old-4.3 {error conditions} { + list [catch {if 2} msg] $msg +} {1 {wrong # args: no script following "2" argument}} +test if-old-4.4 {error conditions} { + list [catch {if 2 then} msg] $msg +} {1 {wrong # args: no script following "then" argument}} +test if-old-4.5 {error conditions} { + list [catch {if 2 the} msg] $msg +} {1 {invalid command name "the"}} +test if-old-4.6 {error conditions} { + list [catch {if 2 then {[error "error in then clause"]}} msg] $msg +} {1 {error in then clause}} +test if-old-4.7 {error conditions} { + list [catch {if 0 then foo elseif} msg] $msg +} {1 {wrong # args: no expression after "elseif" argument}} +test if-old-4.8 {error conditions} { + list [catch {if 0 then foo elsei} msg] $msg +} {1 {invalid command name "elsei"}} +test if-old-4.9 {error conditions} { + list [catch {if 0 then foo elseif 0 bar else} msg] $msg +} {1 {wrong # args: no script following "else" argument}} +test if-old-4.10 {error conditions} { + list [catch {if 0 then foo elseif 0 bar els} msg] $msg +} {1 {invalid command name "els"}} +test if-old-4.11 {error conditions} { + list [catch {if 0 then foo elseif 0 bar else {[error "error in else clause"]}} msg] $msg +} {1 {error in else clause}} diff --git a/tests/if.test b/tests/if.test new file mode 100644 index 0000000..03b8bcd --- /dev/null +++ b/tests/if.test @@ -0,0 +1,505 @@ +# Commands covered: if +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) if.test 1.9 97/07/02 16:40:58 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Basic "if" operation. + +catch {unset a} +test if-1.1 {TclCompileIfCmd: missing if/elseif test} { + list [catch {if} msg] $msg +} {1 {wrong # args: no expression after "if" argument}} +test if-1.2 {TclCompileIfCmd: error in if/elseif test} { + list [catch {if {[error "error in condition"]} foo} msg] $msg +} {1 {error in condition}} +test if-1.3 {TclCompileIfCmd: error in if/elseif test} { + list [catch {if {1+}} msg] $msg $errorInfo +} {1 {syntax error in expression "1+"} {syntax error in expression "1+" + ("if" test expression) + while compiling +"if {1+}"}} +test if-1.4 {TclCompileIfCmd: if/elseif test in braces} { + set a {} + if {1<2} {set a 1} + set a +} {1} +test if-1.5 {TclCompileIfCmd: if/elseif test not in braces} { + set a {} + if 1<2 {set a 1} + set a +} {1} +test if-1.6 {TclCompileIfCmd: multiline test expr} { + set a {} + if {($tcl_platform(platform) != "foobar1") && \ + ($tcl_platform(platform) != "foobar2")} {set a 3} else {set a 4} + set a +} 3 +test if-1.7 {TclCompileIfCmd: "then" after if/elseif test} { + set a {} + if 4>3 then {set a 1} + set a +} {1} +test if-1.8 {TclCompileIfCmd: keyword other than "then" after if/elseif test} { + set a {} + catch {if 1<2 therefore {set a 1}} msg + set msg +} {invalid command name "therefore"} +test if-1.9 {TclCompileIfCmd: missing "then" body} { + set a {} + catch {if 1<2 then} msg + set msg +} {wrong # args: no script following "then" argument} +test if-1.10 {TclCompileIfCmd: error in "then" body} { + set a {} + list [catch {if {$a!="xxx"} then {set}} msg] $msg $errorInfo +} {1 {wrong # args: should be "set varName ?newValue?"} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + ("if" then script line 1) + while compiling +"if {$a!="xxx"} then {set}"}} +test if-1.11 {TclCompileIfCmd: error in "then" body} { + list [catch {if 2 then {[error "error in then clause"]}} msg] $msg +} {1 {error in then clause}} +test if-1.12 {TclCompileIfCmd: "then" body in quotes} { + set a {} + if 27>17 "append a x" + set a +} {x} +test if-1.13 {TclCompileIfCmd: computed "then" body} { + catch {unset x1} + catch {unset x2} + set a {} + set x1 {append a x1} + set x2 {; append a x2} + set a {} + if 1 $x1$x2 + set a +} {x1x2} +test if-1.14 {TclCompileIfCmd: taking proper branch} { + set a {} + if 1<2 {set a 1} + set a +} 1 +test if-1.15 {TclCompileIfCmd: taking proper branch} { + set a {} + if 1>2 {set a 1} + set a +} {} +test if-1.16 {TclCompileIfCmd: test jumpFalse instruction replacement after long "then" body} { + catch {unset i} + set a {} + if 1<2 { + set a 1 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 2 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 3 + } + set a +} 3 +test if-1.17 {TclCompileIfCmd: if/elseif test in quotes} { + set a {} + list [catch {if {"0 < 3"} {set a 1}} msg] $msg +} {1 {expected boolean value but got "0 < 3"}} + + +test if-2.1 {TclCompileIfCmd: "elseif" after if/elseif test} { + set a {} + if 3>4 {set a 1} elseif 1 {set a 2} + set a +} {2} +# Since "else" is optional, the "elwood" below is treated as a command. +# But then there shouldn't be any additional argument words for the "if". +test if-2.2 {TclCompileIfCmd: keyword other than "elseif"} { + set a {} + catch {if 1<2 {set a 1} elwood {set a 2}} msg + set msg +} {wrong # args: extra words after "else" clause in "if" command} +test if-2.3 {TclCompileIfCmd: missing expression after "elseif"} { + set a {} + catch {if 1<2 {set a 1} elseif} msg + set msg +} {wrong # args: no expression after "elseif" argument} +test if-2.4 {TclCompileIfCmd: error in expression after "elseif"} { + set a {} + list [catch {if 3>4 {set a 1} elseif {1>}} msg] $msg $errorInfo +} {1 {syntax error in expression "1>"} {syntax error in expression "1>" + ("if" test expression) + while compiling +"if 3>4 {set a 1} elseif {1>}"}} +test if-2.5 {TclCompileIfCmd: test jumpFalse instruction replacement after long "elseif" body} { + catch {unset i} + set a {} + if 1>2 { + set a 1 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 2 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 3 + } elseif 1<2 then { #; this if arm should be taken + set a 4 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 5 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 6 + } + set a +} 6 + +test if-3.1 {TclCompileIfCmd: "else" clause} { + set a {} + if 3>4 {set a 1} elseif {$a == "foo"} {set a 2} else {set a 3} + set a +} 3 +# Since "else" is optional, the "elsex" below is treated as a command. +# But then there shouldn't be any additional argument words for the "if". +test if-3.2 {TclCompileIfCmd: keyword other than "else"} { + set a {} + catch {if 1<2 then {set a 1} elsex {set a 2}} msg + set msg +} {wrong # args: extra words after "else" clause in "if" command} +test if-3.3 {TclCompileIfCmd: missing body after "else"} { + set a {} + catch {if 2<1 {set a 1} else} msg + set msg +} {wrong # args: no script following "else" argument} +test if-3.4 {TclCompileIfCmd: error compiling body after "else"} { + set a {} + catch {if 2<1 {set a 1} else {set}} msg + set errorInfo +} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + ("if" else script line 1) + while compiling +"if 2<1 {set a 1} else {set}"} +test if-3.5 {TclCompileIfCmd: extra arguments after "else" argument} { + set a {} + catch {if 2<1 {set a 1} else {set a 2} or something} msg + set msg +} {wrong # args: extra words after "else" clause in "if" command} +# The following test also checks whether contained loops and other +# commands are properly relocated because a short jump must be replaced +# by a "long distance" one. +test if-3.6 {TclCompileIfCmd: test jumpFalse instruction replacement after long "else" clause} { + catch {unset i} + set a {} + if 1>2 { + set a 1 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 2 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 3 + } elseif 1==2 then { #; this if arm should be taken + set a 4 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 5 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 6 + } else { + set a 7 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 8 + while {$a != "xxx"} { + break; + while {$i >= 0} { + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + if {[string compare $a "bar"] < 0} { + set i $i + set i [lindex $s $i] + } + set i [expr $i-1] + } + } + set a 9 + } + set a +} 9 + +test if-4.1 {TclCompileIfCmd: "if" command result} { + set a {} + set a [if 3<4 {set i 27}] + set a +} 27 +test if-4.2 {TclCompileIfCmd: "if" command result} { + set a {} + set a [if 3>4 {set i 27}] + set a +} {} +test if-4.3 {TclCompileIfCmd: "if" command result} { + set a {} + set a [if 0 {set i 1} elseif 1 {set i 2}] + set a +} 2 +test if-4.4 {TclCompileIfCmd: "if" command result} { + set a {} + set a [if 0 {set i 1} elseif 0 {set i 2} elseif 2>5 {set i 3} else {set i 4}] + set a +} 4 +test if-4.5 {TclCompileIfCmd: return value} { + if 0 then {set a 22; concat abc} elseif 1 {concat def} {concat ghi} +} def + +# Check "if" and computed command names. + +test if-5.1 {if and computed command names} { + set i 0 + set z if + $z 1 { + set i 1 + } + set i +} 1 diff --git a/tests/incr-old.test b/tests/incr-old.test new file mode 100644 index 0000000..8fbd89f --- /dev/null +++ b/tests/incr-old.test @@ -0,0 +1,89 @@ +# Commands covered: incr +# +# This file contains the original set of tests for Tcl's incr command. +# Since the incr command is now compiled, a new set of tests covering +# the new implementation is in the file "incr.test". Sourcing this file +# into Tcl runs the tests and generates output for errors. +# No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) incr-old.test 1.11 96/11/19 16:56:23 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {unset x} + +test incr-old-1.1 {basic incr operation} { + set x 23 + list [incr x] $x +} {24 24} +test incr-old-1.2 {basic incr operation} { + set x 106 + list [incr x -5] $x +} {101 101} +test incr-old-1.3 {basic incr operation} { + set x " -106" + list [incr x 1] $x +} {-105 -105} +test incr-old-1.3 {basic incr operation} { + set x " +106" + list [incr x 1] $x +} {107 107} + +test incr-old-2.1 {incr errors} { + list [catch incr msg] $msg +} {1 {wrong # args: should be "incr varName ?increment?"}} +test incr-old-2.2 {incr errors} { + list [catch {incr a b c} msg] $msg +} {1 {wrong # args: should be "incr varName ?increment?"}} +test incr-old-2.3 {incr errors} { + catch {unset x} + list [catch {incr x} msg] $msg $errorInfo +} {1 {can't read "x": no such variable} {can't read "x": no such variable + (reading value of variable to increment) + invoked from within +"incr x"}} +test incr-old-2.4 {incr errors} { + set x abc + list [catch {incr x} msg] $msg $errorInfo +} {1 {expected integer but got "abc"} {expected integer but got "abc" + while executing +"incr x"}} +test incr-old-2.5 {incr errors} { + set x 123 + list [catch {incr x 1a} msg] $msg $errorInfo +} {1 {expected integer but got "1a"} {expected integer but got "1a" + while executing +"incr x 1a"}} +test incr-old-2.6 {incr errors} { + proc readonly args {error "variable is read-only"} + set x 123 + trace var x w readonly + list [catch {incr x 1} msg] $msg $errorInfo +} {1 {can't set "x": variable is read-only} {can't set "x": variable is read-only + while executing +"incr x 1"}} +catch {unset x} +test incr-old-2.7 {incr errors} { + set x - + list [catch {incr x 1} msg] $msg +} {1 {expected integer but got "-"}} +test incr-old-2.8 {incr errors} { + set x { - } + list [catch {incr x 1} msg] $msg +} {1 {expected integer but got " - "}} +test incr-old-2.9 {incr errors} { + set x + + list [catch {incr x 1} msg] $msg +} {1 {expected integer but got "+"}} +test incr-old-2.10 {incr errors} { + set x {20 x} + list [catch {incr x 1} msg] $msg +} {1 {expected integer but got "20 x"}} + +concat {} diff --git a/tests/incr.test b/tests/incr.test new file mode 100644 index 0000000..e187d41 --- /dev/null +++ b/tests/incr.test @@ -0,0 +1,246 @@ +# Commands covered: incr +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) incr.test 1.9 97/07/02 16:41:32 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Basic "incr" operation. + +catch {unset x} +catch {unset i} + +test incr-1.1 {TclCompileIncrCmd: missing variable name} { + list [catch {incr} msg] $msg +} {1 {wrong # args: should be "incr varName ?increment?"}} +test incr-1.2 {TclCompileIncrCmd: simple variable name} { + set i 10 + list [incr i] $i +} {11 11} +test incr-1.3 {TclCompileIncrCmd: error compiling variable name} { + set i 10 + catch {incr "i"xxx} msg + set msg +} {extra characters after close-quote} +test incr-1.4 {TclCompileIncrCmd: simple variable name in quotes} { + set i 17 + list [incr "i"] $i +} {18 18} +test incr-1.5 {TclCompileIncrCmd: simple variable name in braces} { + catch {unset {a simple var}} + set {a simple var} 27 + list [incr {a simple var}] ${a simple var} +} {28 28} +test incr-1.6 {TclCompileIncrCmd: simple array variable name} { + catch {unset a} + set a(foo) 37 + list [incr a(foo)] $a(foo) +} {38 38} +test incr-1.7 {TclCompileIncrCmd: non-simple (computed) variable name} { + set x "i" + set i 77 + list [incr $x 2] $i +} {79 79} +test incr-1.8 {TclCompileIncrCmd: non-simple (computed) variable name} { + set x "i" + set i 77 + list [incr [set x] +2] $i +} {79 79} + +test incr-1.9 {TclCompileIncrCmd: increment given} { + set i 10 + list [incr i +07] $i +} {17 17} +test incr-1.10 {TclCompileIncrCmd: no increment given} { + set i 10 + list [incr i] $i +} {11 11} + +test incr-1.11 {TclCompileIncrCmd: simple global name} { + proc p {} { + global i + set i 54 + incr i + } + p +} {55} +test incr-1.12 {TclCompileIncrCmd: simple local name} { + proc p {} { + set foo 100 + incr foo + } + p +} {101} +test incr-1.13 {TclCompileIncrCmd: simple but new (unknown) local name} { + proc p {} { + incr bar + } + catch {p} msg + set msg +} {can't read "bar": no such variable} +test incr-1.14 {TclCompileIncrCmd: simple local name, >255 locals} { + proc 260locals {} { + # create 260 locals + set a0 0; set a1 0; set a2 0; set a3 0; set a4 0 + set a5 0; set a6 0; set a7 0; set a8 0; set a9 0 + set b0 0; set b1 0; set b2 0; set b3 0; set b4 0 + set b5 0; set b6 0; set b7 0; set b8 0; set b9 0 + set c0 0; set c1 0; set c2 0; set c3 0; set c4 0 + set c5 0; set c6 0; set c7 0; set c8 0; set c9 0 + set d0 0; set d1 0; set d2 0; set d3 0; set d4 0 + set d5 0; set d6 0; set d7 0; set d8 0; set d9 0 + set e0 0; set e1 0; set e2 0; set e3 0; set e4 0 + set e5 0; set e6 0; set e7 0; set e8 0; set e9 0 + set f0 0; set f1 0; set f2 0; set f3 0; set f4 0 + set f5 0; set f6 0; set f7 0; set f8 0; set f9 0 + set g0 0; set g1 0; set g2 0; set g3 0; set g4 0 + set g5 0; set g6 0; set g7 0; set g8 0; set g9 0 + set h0 0; set h1 0; set h2 0; set h3 0; set h4 0 + set h5 0; set h6 0; set h7 0; set h8 0; set h9 0 + set i0 0; set i1 0; set i2 0; set i3 0; set i4 0 + set i5 0; set i6 0; set i7 0; set i8 0; set i9 0 + set j0 0; set j1 0; set j2 0; set j3 0; set j4 0 + set j5 0; set j6 0; set j7 0; set j8 0; set j9 0 + set k0 0; set k1 0; set k2 0; set k3 0; set k4 0 + set k5 0; set k6 0; set k7 0; set k8 0; set k9 0 + set l0 0; set l1 0; set l2 0; set l3 0; set l4 0 + set l5 0; set l6 0; set l7 0; set l8 0; set l9 0 + set m0 0; set m1 0; set m2 0; set m3 0; set m4 0 + set m5 0; set m6 0; set m7 0; set m8 0; set m9 0 + set n0 0; set n1 0; set n2 0; set n3 0; set n4 0 + set n5 0; set n6 0; set n7 0; set n8 0; set n9 0 + set o0 0; set o1 0; set o2 0; set o3 0; set o4 0 + set o5 0; set o6 0; set o7 0; set o8 0; set o9 0 + set p0 0; set p1 0; set p2 0; set p3 0; set p4 0 + set p5 0; set p6 0; set p7 0; set p8 0; set p9 0 + set q0 0; set q1 0; set q2 0; set q3 0; set q4 0 + set q5 0; set q6 0; set q7 0; set q8 0; set q9 0 + set r0 0; set r1 0; set r2 0; set r3 0; set r4 0 + set r5 0; set r6 0; set r7 0; set r8 0; set r9 0 + set s0 0; set s1 0; set s2 0; set s3 0; set s4 0 + set s5 0; set s6 0; set s7 0; set s8 0; set s9 0 + set t0 0; set t1 0; set t2 0; set t3 0; set t4 0 + set t5 0; set t6 0; set t7 0; set t8 0; set t9 0 + set u0 0; set u1 0; set u2 0; set u3 0; set u4 0 + set u5 0; set u6 0; set u7 0; set u8 0; set u9 0 + set v0 0; set v1 0; set v2 0; set v3 0; set v4 0 + set v5 0; set v6 0; set v7 0; set v8 0; set v9 0 + set w0 0; set w1 0; set w2 0; set w3 0; set w4 0 + set w5 0; set w6 0; set w7 0; set w8 0; set w9 0 + set x0 0; set x1 0; set x2 0; set x3 0; set x4 0 + set x5 0; set x6 0; set x7 0; set x8 0; set x9 0 + set y0 0; set y1 0; set y2 0; set y3 0; set y4 0 + set y5 0; set y6 0; set y7 0; set y8 0; set y9 0 + set z0 0; set z1 0; set z2 0; set z3 0; set z4 0 + set z5 0; set z6 0; set z7 0; set z8 0; set z9 0 + # now increment the last one (local var index > 255) + incr z9 + } + 260locals +} {1} +test incr-1.15 {TclCompileIncrCmd: variable is array} { + catch {unset a} + set a(foo) 27 + set x [incr a(foo) 11] + catch {unset a} + set x +} 38 +test incr-1.16 {TclCompileIncrCmd: variable is array, elem substitutions} { + catch {unset a} + set i 5 + set a(foo5) 27 + set x [incr a(foo$i) 11] + catch {unset a} + set x +} 38 + +test incr-1.17 {TclCompileIncrCmd: increment given, simple int} { + set i 5 + incr i 123 +} 128 +test incr-1.18 {TclCompileIncrCmd: increment given, simple int} { + set i 5 + incr i -100 +} -95 +test incr-1.19 {TclCompileIncrCmd: increment given, but erroneous} { + set i 5 + catch {incr i [set]} msg + set errorInfo +} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + (increment expression) + while compiling +"incr i [set]"} +test incr-1.20 {TclCompileIncrCmd: increment given, in quotes} { + set i 25 + incr i "-100" +} -75 +test incr-1.21 {TclCompileIncrCmd: increment given, in braces} { + set i 24 + incr i {126} +} 150 +test incr-1.22 {TclCompileIncrCmd: increment given, large int} { + set i 5 + incr i 200000 +} 200005 +test incr-1.23 {TclCompileIncrCmd: increment given, formatted int != int} { + set i 25 + incr i 000012345 ;# an octal literal +} 5374 +test incr-1.24 {TclCompileIncrCmd: increment given, formatted int != int} { + set i 25 + catch {incr i 1a} msg + set msg +} {expected integer but got "1a"} + +test incr-1.25 {TclCompileIncrCmd: too many arguments} { + set i 10 + catch {incr i 10 20} msg + set msg +} {wrong # args: should be "incr varName ?increment?"} + + +test incr-1.26 {TclCompileIncrCmd: runtime error, bad variable name} { + list [catch {incr {"foo}} msg] $msg $errorInfo +} {1 {can't read ""foo": no such variable} {can't read ""foo": no such variable + (reading value of variable to increment) + invoked from within +"incr {"foo}"}} +test incr-1.27 {TclCompileIncrCmd: runtime error, bad variable name} { + list [catch {incr [set]} msg] $msg $errorInfo +} {1 {wrong # args: should be "set varName ?newValue?"} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + while compiling +"incr [set]"}} +test incr-1.28 {TclCompileIncrCmd: runtime error, readonly variable} { + proc readonly args {error "variable is read-only"} + set x 123 + trace var x w readonly + list [catch {incr x 1} msg] $msg $errorInfo +} {1 {can't set "x": variable is read-only} {can't set "x": variable is read-only + while executing +"incr x 1"}} +catch {unset x} +test incr-1.29 {TclCompileIncrCmd: runtime error, bad variable value} { + set x " - " + list [catch {incr x 1} msg] $msg +} {1 {expected integer but got " - "}} + +# Check "incr" and computed command names. + +test incr-2.1 {incr and computed command names} { + set i 5 + set z incr + $z i -1 + set i +} 4 diff --git a/tests/indexObj.test b/tests/indexObj.test new file mode 100644 index 0000000..9f30ee0 --- /dev/null +++ b/tests/indexObj.test @@ -0,0 +1,68 @@ +# This file is a Tcl script to test out the the procedures in file +# tkIndexObj.c, which implement indexed table lookups. The tests here +# are organized in the standard fashion for Tcl tests. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# @(#) indexObj.test 1.3 97/06/23 18:23:09 + +if {[info procs test] != "test"} { + source defs +} + +if {[info commands testindexobj] == {}} { + puts "This application hasn't been compiled with the \"testindexobj\"" + puts "command, so I can't test Tcl_GetIndexFromObj etc." + return +} + +test indexObj-1.1 {exact match} { + testindexobj 1 1 xyz abc def xyz alm +} {2} +test indexObj-1.2 {exact match} { + testindexobj 1 1 abc abc def xyz alm +} {0} +test indexObj-1.3 {exact match} { + testindexobj 1 1 alm abc def xyz alm +} {3} +test indexObj-1.4 {unique abbreviation} { + testindexobj 1 1 xy abc def xalb xyz alm +} {3} +test indexObj-1.5 {multiple abbreviations and exact match} { + testindexobj 1 1 x abc def xalb xyz alm x +} {5} +test indexObj-1.6 {forced exact match} { + testindexobj 1 0 xy abc def xalb xy alm +} {3} +test indexObj-1.7 {forced exact match} { + testindexobj 1 0 x abc def xalb xyz alm x +} {5} + +test indexObj-2.1 {no match} { + list [catch {testindexobj 1 1 dddd abc def xalb xyz alm x} msg] $msg +} {1 {bad token "dddd": must be abc, def, xalb, xyz, alm, or x}} +test indexObj-2.2 {no match} { + list [catch {testindexobj 1 1 dddd abc} msg] $msg +} {1 {bad token "dddd": must be abc}} +test indexObj-2.3 {no match: no abbreviations} { + list [catch {testindexobj 1 0 xy abc def xalb xyz alm} msg] $msg +} {1 {bad token "xy": must be abc, def, xalb, xyz, or alm}} +test indexObj-2.4 {ambiguous value} { + list [catch {testindexobj 1 1 d dumb daughter a c} msg] $msg +} {1 {ambiguous token "d": must be dumb, daughter, a, or c}} +test indexObj-2.5 {omit error message} { + list [catch {testindexobj 0 1 d x} msg] $msg +} {1 {}} + +test indexObj-3.1 {cache result to skip next lookup} { + testindexobj check 42 +} {42} + +test indexObj-4.1 {free old internal representation} { + set x {a b} + lindex $x 1 + testindexobj 1 1 $x abc def {a b} zzz +} {2} diff --git a/tests/info.test b/tests/info.test new file mode 100644 index 0000000..784dad1 --- /dev/null +++ b/tests/info.test @@ -0,0 +1,576 @@ +# Commands covered: info +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1994 The Regents of the University of California. +# Copyright (c) 1994-1995 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) info.test 1.39 97/08/01 11:10:24 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test info-1.1 {info args option} { + proc t1 {a bbb c} {return foo} + info args t1 +} {a bbb c} +test info-1.2 {info args option} { + proc t1 {{a default1} {bbb default2} {c default3} args} {return foo} + info a t1 +} {a bbb c args} +test info-1.3 {info args option} { + proc t1 "" {return foo} + info args t1 +} {} +test info-1.4 {info args option} { + catch {rename t1 {}} + list [catch {info args t1} msg] $msg +} {1 {"t1" isn't a procedure}} +test info-1.5 {info args option} { + list [catch {info args set} msg] $msg +} {1 {"set" isn't a procedure}} +test info-1.6 {info args option} { + proc t1 {a b} {set c 123; set d $c} + t1 1 2 + info args t1 +} {a b} + +test info-2.1 {info body option} { + proc t1 {} {body of t1} + info body t1 +} {body of t1} +test info-2.2 {info body option} { + list [catch {info body set} msg] $msg +} {1 {"set" isn't a procedure}} +test info-2.3 {info body option} { + list [catch {info args set 1} msg] $msg +} {1 {wrong # args: should be "info args procname"}} + +# "info cmdcount" is no longer accurate for compiled commands! The expected +# result for info-3.1 used to be "3" and is now "1" since the "set"s have +# been compiled away. +test info-3.1 {info cmdcount option} { + set x [info cmdcount] + set y 12345 + set z [info cm] + expr $z-$x +} 1 +test info-3.2 {info body option} { + list [catch {info cmdcount 1} msg] $msg +} {1 {wrong # args: should be "info cmdcount"}} + +test info-4.1 {info commands option} { + proc t1 {} {} + proc t2 {} {} + set x " [info commands] " + list [string match {* t1 *} $x] [string match {* t2 *} $x] \ + [string match {* set *} $x] [string match {* list *} $x] +} {1 1 1 1} +test info-4.2 {info commands option} { + proc t1 {} {} + rename t1 {} + set x [info comm] + string match {* t1 *} $x +} 0 +test info-4.3 {info commands option} { + proc _t1_ {} {} + proc _t2_ {} {} + info commands _t1_ +} _t1_ +test info-4.4 {info commands option} { + proc _t1_ {} {} + proc _t2_ {} {} + lsort [info commands _t*] +} {_t1_ _t2_} +catch {rename _t1_ {}} +catch {rename _t2_ {}} +test info-4.5 {info commands option} { + list [catch {info commands a b} msg] $msg +} {1 {wrong # args: should be "info commands ?pattern?"}} + +test info-5.1 {info complete option} { + info complete "" +} 1 +test info-5.2 {info complete option} { + info complete " \n" +} 1 +test info-5.3 {info complete option} { + info complete "abc def" +} 1 +test info-5.4 {info complete option} { + info complete "a b c d e f \t\n" +} 1 +test info-5.5 {info complete option} { + info complete {a b c"d} +} 1 +test info-5.6 {info complete option} { + info complete {a b "c d" e} +} 1 +test info-5.7 {info complete option} { + info complete {a b "c d"} +} 1 +test info-5.8 {info complete option} { + info complete {a b "c d"} +} 1 +test info-5.9 {info complete option} { + info complete {a b "c d} +} 0 +test info-5.10 {info complete option} { + info complete {a b "} +} 0 +test info-5.11 {info complete option} { + info complete {a b "cd"xyz} +} 1 +test info-5.12 {info complete option} { + info complete {a b "c $d() d"} +} 1 +test info-5.13 {info complete option} { + info complete {a b "c $dd("} +} 0 +test info-5.14 {info complete option} { + info complete {a b "c \"} +} 0 +test info-5.15 {info complete option} { + info complete {a b "c [d e f]"} +} 1 +test info-5.16 {info complete option} { + info complete {a b "c [d e f] g"} +} 1 +test info-5.17 {info complete option} { + info complete {a b "c [d e f"} +} 0 +test info-5.18 {info complete option} { + info complete {a {b c d} e} +} 1 +test info-5.19 {info complete option} { + info complete {a {b c d}} +} 1 +test info-5.20 {info complete option} { + info complete "a b\{c d" +} 1 +test info-5.21 {info complete option} { + info complete "a b \{c" +} 0 +test info-5.22 {info complete option} { + info complete "a b \{c{ }" +} 0 +test info-5.23 {info complete option} { + info complete "a b {c d e}xxx" +} 1 +test info-5.24 {info complete option} { + info complete "a b {c \\\{d e}xxx" +} 1 +test info-5.25 {info complete option} { + info complete {a b [ab cd ef]} +} 1 +test info-5.26 {info complete option} { + info complete {a b x[ab][cd][ef] gh} +} 1 +test info-5.27 {info complete option} { + info complete {a b x[ab][cd[ef] gh} +} 0 +test info-5.28 {info complete option} { + info complete {a b x[ gh} +} 0 +test info-5.29 {info complete option} { + info complete {[]]]} +} 1 +test info-5.30 {info complete option} { + info complete {abc x$yyy} +} 1 +test info-5.31 {info complete option} { + info complete "abc x\${abc\[\\d} xyz" +} 1 +test info-5.32 {info complete option} { + info complete "abc x\$\{ xyz" +} 0 +test info-5.33 {info complete option} { + info complete {word $a(xyz)} +} 1 +test info-5.34 {info complete option} { + info complete {word $a(} +} 0 +test info-5.35 {info complete option} { + info complete "set a \\\n" +} 0 +test info-5.36 {info complete option} { + info complete "set a \\n " +} 1 +test info-5.37 {info complete option} { + info complete "set a \\" +} 1 +test info-5.38 {info complete option} { + info complete "foo \\\n\{" +} 0 +test info-5.39 {info complete option} { + info complete " # \{" +} 1 +test info-5.40 {info complete option} { + info complete "foo bar;# \{" +} 1 +test info-5.41 {info complete option} { + info complete "a\nb\n# \{\n# \{\nc\n" +} 1 +test info-5.42 {info complete option} { + info complete "#Incomplete comment\\\n" +} 0 +test info-5.43 {info complete option} { + info complete "#Incomplete comment\\\nBut now it's complete.\n" +} 1 +test info-5.44 {info complete option} { + info complete "# Complete comment\\\\\n" +} 1 +test info-5.45 {info complete option} { + info complete "abc\\\n def" +} 1 +test info-5.46 {info complete option} { + info complete "abc\\\n " +} 1 +test info-5.47 {info complete option} { + info complete "abc\\\n" +} 0 + +test info-6.1 {info default option} { + proc t1 {a b {c d} {e "long default value"}} {} + info default t1 a value +} 0 +test info-6.2 {info default option} { + proc t1 {a b {c d} {e "long default value"}} {} + set value 12345 + info d t1 a value + set value +} {} +test info-6.3 {info default option} { + proc t1 {a b {c d} {e "long default value"}} {} + info default t1 c value +} 1 +test info-6.4 {info default option} { + proc t1 {a b {c d} {e "long default value"}} {} + set value 12345 + info default t1 c value + set value +} d +test info-6.5 {info default option} { + proc t1 {a b {c d} {e "long default value"}} {} + set value 12345 + set x [info default t1 e value] + list $x $value +} {1 {long default value}} +test info-6.6 {info default option} { + list [catch {info default a b} msg] $msg +} {1 {wrong # args: should be "info default procname arg varname"}} +test info-6.7 {info default option} { + list [catch {info default _nonexistent_ a b} msg] $msg +} {1 {"_nonexistent_" isn't a procedure}} +test info-6.8 {info default option} { + proc t1 {a b} {} + list [catch {info default t1 x value} msg] $msg +} {1 {procedure "t1" doesn't have an argument "x"}} +test info-6.9 {info default option} { + catch {unset a} + set a(0) 88 + proc t1 {a b} {} + list [catch {info default t1 a a} msg] $msg +} {1 {couldn't store default value in variable "a"}} +test info-6.10 {info default option} { + catch {unset a} + set a(0) 88 + proc t1 {{a 18} b} {} + list [catch {info default t1 a a} msg] $msg +} {1 {couldn't store default value in variable "a"}} +catch {unset a} + +test info-7.1 {info exists option} { + set value foo + info exists value +} 1 +catch {unset _nonexistent_} +test info-7.2 {info exists option} { + info exists _nonexistent_ +} 0 +test info-7.3 {info exists option} { + proc t1 {x} {return [info exists x]} + t1 2 +} 1 +test info-7.4 {info exists option} { + proc t1 {x} { + global _nonexistent_ + return [info exists _nonexistent_] + } + t1 2 +} 0 +test info-7.5 {info exists option} { + proc t1 {x} { + set y 47 + return [info exists y] + } + t1 2 +} 1 +test info-7.6 {info exists option} { + proc t1 {x} {return [info exists value]} + t1 2 +} 0 +test info-7.7 {info exists option} { + catch {unset x} + set x(2) 44 + list [info exists x] [info exists x(1)] [info exists x(2)] +} {1 0 1} +catch {unset x} +test info-7.8 {info exists option} { + list [catch {info exists} msg] $msg +} {1 {wrong # args: should be "info exists varName"}} +test info-7.9 {info exists option} { + list [catch {info exists 1 2} msg] $msg +} {1 {wrong # args: should be "info exists varName"}} + +test info-8.1 {info globals option} { + set x 1 + set y 2 + set value 23 + set a " [info globals] " + list [string match {* x *} $a] [string match {* y *} $a] \ + [string match {* value *} $a] [string match {* _foobar_ *} $a] +} {1 1 1 0} +test info-8.2 {info globals option} { + set _xxx1 1 + set _xxx2 2 + lsort [info g _xxx*] +} {_xxx1 _xxx2} +test info-8.3 {info globals option} { + list [catch {info globals 1 2} msg] $msg +} {1 {wrong # args: should be "info globals ?pattern?"}} + +test info-9.1 {info level option} { + info level +} 0 +test info-9.2 {info level option} { + proc t1 {a b} { + set x [info le] + set y [info level 1] + list $x $y + } + t1 146 testString +} {1 {t1 146 testString}} +test info-9.3 {info level option} { + proc t1 {a b} { + t2 [expr $a*2] $b + } + proc t2 {x y} { + list [info level] [info level 1] [info level 2] [info level -1] \ + [info level 0] + } + t1 146 {a {b c} {{{c}}}} +} {2 {t1 146 {a {b c} {{{c}}}}} {t2 292 {a {b c} {{{c}}}}} {t1 146 {a {b c} {{{c}}}}} {t2 292 {a {b c} {{{c}}}}}} +test info-9.4 {info level option} { + proc t1 {} { + set x [info level] + set y [info level 1] + list $x $y + } + t1 +} {1 t1} +test info-9.5 {info level option} { + list [catch {info level 1 2} msg] $msg +} {1 {wrong # args: should be "info level ?number?"}} +test info-9.6 {info level option} { + list [catch {info level 123a} msg] $msg +} {1 {expected integer but got "123a"}} +test info-9.7 {info level option} { + list [catch {info level 0} msg] $msg +} {1 {bad level "0"}} +test info-9.8 {info level option} { + proc t1 {} {info level -1} + list [catch {t1} msg] $msg +} {1 {bad level "-1"}} +test info-9.9 {info level option} { + proc t1 {x} {info level $x} + list [catch {t1 -3} msg] $msg +} {1 {bad level "-3"}} + +set savedLibrary $tcl_library +test info-10.1 {info library option} { + list [catch {info library x} msg] $msg +} {1 {wrong # args: should be "info library"}} +test info-10.2 {info library option} { + set tcl_library 12345 + info library +} {12345} +test info-10.3 {info library option} { + unset tcl_library + list [catch {info library} msg] $msg +} {1 {no library has been specified for Tcl}} +set tcl_library $savedLibrary + +test info-11.1 {info loaded option} { + list [catch {info loaded a b} msg] $msg +} {1 {wrong # args: should be "info loaded ?interp?"}} +test info-11.2 {info loaded option} { + list [catch {info loaded {}}] [catch {info loaded gorp} msg] $msg +} {0 1 {couldn't find slave interpreter named "gorp"}} + +test info-12.1 {info locals option} { + set a 22 + proc t1 {x y} { + set b 13 + set c testing + global a + return [info locals] + } + lsort [t1 23 24] +} {b c x y} +test info-12.2 {info locals option} { + proc t1 {x y} { + set xx1 2 + set xx2 3 + set y 4 + return [info loc x*] + } + lsort [t1 2 3] +} {x xx1 xx2} +test info-12.3 {info locals option} { + list [catch {info locals 1 2} msg] $msg +} {1 {wrong # args: should be "info locals ?pattern?"}} +test info-12.4 {info locals option} { + info locals +} {} +test info-12.5 {info locals option} { + proc t1 {} {return [info locals]} + t1 +} {} +test info-12.6 {info locals vs unset compiled locals} { + proc t1 {lst} { + foreach $lst $lst {} + unset lst + return [info locals] + } + lsort [t1 {a b c c d e f}] +} {a b c d e f} + +test info-13.1 {info nameofexecutable option} { + list [catch {info nameofexecutable foo} msg] $msg +} {1 {wrong # args: should be "info nameofexecutable"}} + +test info-14.1 {info patchlevel option} { + set a [info patchlevel] + regexp {[0-9]+\.[0-9]+([p[0-9]+)?} $a +} 1 +test info-14.2 {info patchlevel option} { + list [catch {info patchlevel a} msg] $msg +} {1 {wrong # args: should be "info patchlevel"}} +test info-14.3 {info patchlevel option} { + set t $tcl_patchLevel + unset tcl_patchLevel + set result [list [catch {info patchlevel} msg] $msg] + set tcl_patchLevel $t + set result +} {1 {can't read "tcl_patchLevel": no such variable}} + +test info-15.1 {info procs option} { + proc t1 {} {} + proc t2 {} {} + set x " [info procs] " + list [string match {* t1 *} $x] [string match {* t2 *} $x] \ + [string match {* _undefined_ *} $x] +} {1 1 0} +test info-15.2 {info procs option} { + proc _tt1 {} {} + proc _tt2 {} {} + lsort [info pr _tt*] +} {_tt1 _tt2} +catch {rename _tt1 {}} +catch {rename _tt2 {}} +test info-15.3 {info procs option} { + list [catch {info procs 2 3} msg] $msg +} {1 {wrong # args: should be "info procs ?pattern?"}} + +set self info.test +if {$tcl_platform(os) == "Win32s"} { + set self info~1.tes +} + +test info-16.1 {info script option} { + list [catch {info script x} msg] $msg +} {1 {wrong # args: should be "info script"}} +test info-16.2 {info script option} { + file tail [info sc] +} $self +removeFile gorp.info +makeFile "info script\n" gorp.info +test info-16.3 {info script option} { + list [source gorp.info] [file tail [info script]] +} [list gorp.info $self] +test info-16.4 {resetting "info script" after errors} { + catch {source ~_nobody_/foo} + file tail [info script] +} $self +test info-16.5 {resetting "info script" after errors} { + catch {source _nonexistent_} + file tail [info script] +} $self +removeFile gorp.info + +test info-17.1 {info sharedlibextension option} { + list [catch {info sharedlibextension foo} msg] $msg +} {1 {wrong # args: should be "info sharedlibextension"}} + +test info-18.1 {info tclversion option} { + set x [info tclversion] + scan $x "%d.%d%c" a b c +} 2 +test info-18.2 {info tclversion option} { + list [catch {info t 2} msg] $msg +} {1 {wrong # args: should be "info tclversion"}} +test info-18.3 {info tclversion option} { + set t $tcl_version + unset tcl_version + set result [list [catch {info tclversion} msg] $msg] + set tcl_version $t + set result +} {1 {can't read "tcl_version": no such variable}} + +test info-19.1 {info vars option} { + set a 1 + set b 2 + proc t1 {x y} { + global a b + set c 33 + return [info vars] + } + lsort [t1 18 19] +} {a b c x y} +test info-19.2 {info vars option} { + set xxx1 1 + set xxx2 2 + proc t1 {xxa y} { + global xxx1 xxx2 + set c 33 + return [info vars x*] + } + lsort [t1 18 19] +} {xxa xxx1 xxx2} +test info-19.3 {info vars option} { + lsort [info vars] +} [lsort [info globals]] +test info-19.4 {info vars option} { + list [catch {info vars a b} msg] $msg +} {1 {wrong # args: should be "info vars ?pattern?"}} + +test info-20.1 {miscellaneous error conditions} { + list [catch {info} msg] $msg +} {1 {wrong # args: should be "info option ?arg arg ...?"}} +test info-20.2 {miscellaneous error conditions} { + list [catch {info gorp} msg] $msg +} {1 {bad option "gorp": must be args, body, cmdcount, commands, complete, default, exists, globals, hostname, level, library, loaded, locals, nameofexecutable, patchlevel, procs, script, sharedlibextension, tclversion, or vars}} +test info-20.3 {miscellaneous error conditions} { + list [catch {info c} msg] $msg +} {1 {ambiguous option "c": must be args, body, cmdcount, commands, complete, default, exists, globals, hostname, level, library, loaded, locals, nameofexecutable, patchlevel, procs, script, sharedlibextension, tclversion, or vars}} +test info-20.4 {miscellaneous error conditions} { + list [catch {info l} msg] $msg +} {1 {ambiguous option "l": must be args, body, cmdcount, commands, complete, default, exists, globals, hostname, level, library, loaded, locals, nameofexecutable, patchlevel, procs, script, sharedlibextension, tclversion, or vars}} +test info-20.5 {miscellaneous error conditions} { + list [catch {info s} msg] $msg +} {1 {ambiguous option "s": must be args, body, cmdcount, commands, complete, default, exists, globals, hostname, level, library, loaded, locals, nameofexecutable, patchlevel, procs, script, sharedlibextension, tclversion, or vars}} diff --git a/tests/init.test b/tests/init.test new file mode 100644 index 0000000..2d6e068 --- /dev/null +++ b/tests/init.test @@ -0,0 +1,149 @@ +# Functionality covered: this file contains a collection of tests for the +# auto loading and namespaces. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) init.test 1.5 97/11/19 18:08:20 + + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Clear out any namespaces called test_ns_* +catch {eval namespace delete [namespace children :: test_ns_*]} + +# Six cases - white box testing + +test init-1.1 {auto_qualify - absolute cmd - namespace} { + auto_qualify ::foo::bar ::blue +} ::foo::bar + +test init-1.2 {auto_qualify - absolute cmd - global} { + auto_qualify ::global ::sub +} global + +test init-1.3 {auto_qualify - no colons cmd - global} { + auto_qualify nocolons :: +} nocolons + +test init-1.4 {auto_qualify - no colons cmd - namespace} { + auto_qualify nocolons ::sub +} {::sub::nocolons nocolons} + +test init-1.5 {auto_qualify - colons in cmd - global} { + auto_qualify foo::bar :: +} ::foo::bar + +test init-1.6 {auto_qualify - colons in cmd - namespace} { + auto_qualify foo::bar ::sub +} {::sub::foo::bar ::foo::bar} + +# Some additional tests + +test init-1.7 {auto_qualify - multiples colons 1} { + auto_qualify :::foo::::bar ::blue +} ::foo::bar + +test init-1.8 {auto_qualify - multiple colons 2} { + auto_qualify :::foo ::bar +} foo + + +# we use a sub interp and auto_reset and double the tests because there is 2 +# places where auto_loading occur (before loading the indexes files and after) + +set testInterp [interp create] +interp eval $testInterp [list set VERBOSE $VERBOSE] +interp eval $testInterp [list set TESTS $TESTS] + +interp eval $testInterp { + +if {[string compare test [info procs test]] == 1} then {source defs} + +auto_reset +catch {rename parray {}} + +test init-2.0 {load parray - stage 1} { + set ret [catch {namespace eval ::test {parray}} error] + rename parray {} ; # remove it, for the next test - that should not fail. + list $ret $error +} {1 {no value given for parameter "a" to "parray"}} + + +test init-2.1 {load parray - stage 2} { + set ret [catch {namespace eval ::test {parray}} error] + list $ret $error +} {1 {no value given for parameter "a" to "parray"}} + + +auto_reset +catch {rename ::safe::setLogCmd {}} +#unset auto_index(::safe::setLogCmd) +#unset auto_oldpath + +test init-2.2 {load ::safe::setLogCmd - stage 1} { + ::safe::setLogCmd + rename ::safe::setLogCmd {} ; # should not fail +} {} + +test init-2.3 {load ::safe::setLogCmd - stage 2} { + ::safe::setLogCmd + rename ::safe::setLogCmd {} ; # should not fail +} {} + +auto_reset +catch {rename ::safe::setLogCmd {}} + +test init-2.4 {load safe:::setLogCmd - stage 1} { + safe:::setLogCmd ; # intentionally 3 : + rename ::safe::setLogCmd {} ; # should not fail +} {} + +test init-2.5 {load safe:::setLogCmd - stage 2} { + safe:::setLogCmd ; # intentionally 3 : + rename ::safe::setLogCmd {} ; # should not fail +} {} + +auto_reset +catch {rename ::safe::setLogCmd {}} + +test init-2.6 {load setLogCmd from safe:: - stage 1} { + namespace eval safe setLogCmd + rename ::safe::setLogCmd {} ; # should not fail +} {} + +test init-2.7 {oad setLogCmd from safe:: - stage 2} { + namespace eval safe setLogCmd + rename ::safe::setLogCmd {} ; # should not fail +} {} + + +auto_reset +package require http 2.0 +catch {rename ::http::geturl {}} + +test init-2.8 {load http::geturl (package)} { + # 3 ':' on purpose + set ret [catch {namespace eval ::test {http:::geturl}} error] + # removing it, for the next test. should not fail. + rename ::http::geturl {} ; + list $ret $error +} {1 {no value given for parameter "url" to "http:::geturl"}} + + +test init-3.0 {random stuff in the auto_index, should still work} { + set auto_index(foo:::bar::blah) { + namespace eval foo {namespace eval bar {proc blah {} {return 1}}} + } + foo:::bar::blah +} 1 + +} + +interp delete $testInterp + diff --git a/tests/interp.test b/tests/interp.test new file mode 100644 index 0000000..919774f --- /dev/null +++ b/tests/interp.test @@ -0,0 +1,2258 @@ +# This file tests the multiple interpreter facility of Tcl +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) interp.test 1.64 97/09/04 16:02:23 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# The set of hidden commands is platform dependent: + +if {"$tcl_platform(platform)" == "macintosh"} { + set hidden_cmds {beep cd echo exit fconfigure file glob load ls open pwd socket source} +} else { + set hidden_cmds {cd exec exit fconfigure file glob load open pwd socket source} +} + +foreach i [interp slaves] { + interp delete $i +} + +proc equiv {x} {return $x} + +# Part 0: Check out options for interp command +test interp-1.1 {options for interp command} { + list [catch {interp} msg] $msg +} {1 {wrong # args: should be "interp cmd ?arg ...?"}} +test interp-1.2 {options for interp command} { + list [catch {interp frobox} msg] $msg +} {1 {bad option "frobox": must be alias, aliases, create, delete, eval, exists, expose, hide, hidden, issafe, invokehidden, marktrusted, slaves, share, target, or transfer}} +test interp-1.3 {options for interp command} { + interp delete +} "" +test interp-1.4 {options for interp command} { + list [catch {interp delete foo bar} msg] $msg +} {1 {interpreter named "foo" not found}} +test interp-1.5 {options for interp command} { + list [catch {interp exists foo bar} msg] $msg +} {1 {wrong # args: should be "interp exists ?path?"}} +# +# test interp-0.6 was removed +# +test interp-1.6 {options for interp command} { + list [catch {interp slaves foo bar zop} msg] $msg +} {1 {wrong # args: should be "interp slaves ?path?"}} +test interp-1.7 {options for interp command} { + list [catch {interp hello} msg] $msg +} {1 {bad option "hello": must be alias, aliases, create, delete, eval, exists, expose, hide, hidden, issafe, invokehidden, marktrusted, slaves, share, target, or transfer}} +test interp-1.8 {options for interp command} { + list [catch {interp -froboz} msg] $msg +} {1 {bad option "-froboz": must be alias, aliases, create, delete, eval, exists, expose, hide, hidden, issafe, invokehidden, marktrusted, slaves, share, target, or transfer}} +test interp-1.9 {options for interp command} { + list [catch {interp -froboz -safe} msg] $msg +} {1 {bad option "-froboz": must be alias, aliases, create, delete, eval, exists, expose, hide, hidden, issafe, invokehidden, marktrusted, slaves, share, target, or transfer}} +test interp-1.10 {options for interp command} { + list [catch {interp target} msg] $msg +} {1 {wrong # args: should be "interp target path alias"}} + +# Part 1: Basic interpreter creation tests: +test interp-2.1 {basic interpreter creation} { + interp create a +} a +test interp-2.2 {basic interpreter creation} { + catch {interp create} +} 0 +test interp-2.3 {basic interpreter creation} { + catch {interp create -safe} +} 0 +test interp-2.4 {basic interpreter creation} { + list [catch {interp create a} msg] $msg +} {1 {interpreter named "a" already exists, cannot create}} +test interp-2.5 {basic interpreter creation} { + interp create b -safe +} b +test interp-2.6 {basic interpreter creation} { + interp create d -safe +} d +test interp-2.7 {basic interpreter creation} { + list [catch {interp create -froboz} msg] $msg +} {1 {bad option "-froboz": should be -safe}} +test interp-2.8 {basic interpreter creation} { + interp create -- -froboz +} -froboz +test interp-2.9 {basic interpreter creation} { + interp create -safe -- -froboz1 +} -froboz1 +test interp-2.10 {basic interpreter creation} { + interp create {a x1} + interp create {a x2} + interp create {a x3} -safe +} {a x3} +test interp-2.11 {anonymous interps vs existing procs} { + set x [interp create] + regexp "interp(\[0-9]+)" $x dummy thenum + interp delete $x + incr thenum + proc interp$thenum {} {} + set x [interp create] + regexp "interp(\[0-9]+)" $x dummy anothernum + expr $anothernum - $thenum +} 1 +test interp-2.12 {anonymous interps vs existing procs} { + set x [interp create -safe] + regexp "interp(\[0-9]+)" $x dummy thenum + interp delete $x + incr thenum + proc interp$thenum {} {} + set x [interp create -safe] + regexp "interp(\[0-9]+)" $x dummy anothernum + expr $anothernum - $thenum +} 1 + +foreach i [interp slaves] { + interp delete $i +} + +# Part 2: Testing "interp slaves" and "interp exists" +test interp-3.1 {testing interp exists and interp slaves} { + interp slaves +} "" +test interp-3.2 {testing interp exists and interp slaves} { + interp create a + interp exists a +} 1 +test interp-3.3 {testing interp exists and interp slaves} { + interp exists nonexistent +} 0 +test interp-3.4 {testing interp exists and interp slaves} { + list [catch {interp slaves a b c} msg] $msg +} {1 {wrong # args: should be "interp slaves ?path?"}} +test interp-3.5 {testing interp exists and interp slaves} { + list [catch {interp exists a b c} msg] $msg +} {1 {wrong # args: should be "interp exists ?path?"}} +test interp-3.6 {testing interp exists and interp slaves} { + interp exists +} 1 +test interp-3.7 {testing interp exists and interp slaves} { + interp slaves +} a +test interp-3.8 {testing interp exists and interp slaves} { + list [catch {interp slaves a b c} msg] $msg +} {1 {wrong # args: should be "interp slaves ?path?"}} +test interp-3.9 {testing interp exists and interp slaves} { + interp create {a a2} -safe + interp slaves a +} {a2} +test interp-3.10 {testing interp exists and interp slaves} { + interp exists {a a2} +} 1 + +# Part 3: Testing "interp delete" +test interp-3.11 {testing interp delete} { + interp delete +} "" +test interp-4.1 {testing interp delete} { + catch {interp create a} + interp delete a +} "" +test interp-4.2 {testing interp delete} { + list [catch {interp delete nonexistent} msg] $msg +} {1 {interpreter named "nonexistent" not found}} +test interp-4.3 {testing interp delete} { + list [catch {interp delete x y z} msg] $msg +} {1 {interpreter named "x" not found}} +test interp-4.4 {testing interp delete} { + interp delete +} "" +test interp-4.5 {testing interp delete} { + interp create a + interp create {a x1} + interp delete {a x1} + interp slaves a +} "" +test interp-4.6 {testing interp delete} { + interp create c1 + interp create c2 + interp create c3 + interp delete c1 c2 c3 +} "" +test interp-4.7 {testing interp delete} { + interp create c1 + interp create c2 + list [catch {interp delete c1 c2 c3} msg] $msg +} {1 {interpreter named "c3" not found}} + +foreach i [interp slaves] { + interp delete $i +} + +# Part 4: Consistency checking - all nondeleted interpreters should be +# there: +test interp-5.1 {testing consistency} { + interp slaves +} "" +test interp-5.2 {testing consistency} { + interp exists a +} 0 +test interp-5.3 {testing consistency} { + interp exists nonexistent +} 0 + +# Recreate interpreter "a" +interp create a + +# Part 5: Testing eval in interpreter object command and with interp command +test interp-6.1 {testing eval} { + a eval expr 3 + 5 +} 8 +test interp-6.2 {testing eval} { + list [catch {a eval foo} msg] $msg +} {1 {invalid command name "foo"}} +test interp-6.3 {testing eval} { + a eval {proc foo {} {expr 3 + 5}} + a eval foo +} 8 +test interp-6.4 {testing eval} { + interp eval a foo +} 8 + +test interp-6.5 {testing eval} { + interp create {a x2} + interp eval {a x2} {proc frob {} {expr 4 * 9}} + interp eval {a x2} frob +} 36 +test interp-6.6 {testing eval} { + list [catch {interp eval {a x2} foo} msg] $msg +} {1 {invalid command name "foo"}} + +# UTILITY PROCEDURE RUNNING IN MASTER INTERPRETER: +proc in_master {args} { + return [list seen in master: $args] +} + +# Part 6: Testing basic alias creation +test interp-7.1 {testing basic alias creation} { + a alias foo in_master +} foo +test interp-7.2 {testing basic alias creation} { + a alias bar in_master a1 a2 a3 +} bar +# Test 6.3 has been deleted. +test interp-7.3 {testing basic alias creation} { + a alias foo +} in_master +test interp-7.4 {testing basic alias creation} { + a alias bar +} {in_master a1 a2 a3} +test interp-7.5 {testing basic alias creation} { + a aliases +} {foo bar} + +# Part 7: testing basic alias invocation +test interp-8.1 {testing basic alias invocation} { + catch {interp create a} + a alias foo in_master + a eval foo s1 s2 s3 +} {seen in master: {s1 s2 s3}} +test interp-8.2 {testing basic alias invocation} { + catch {interp create a} + a alias bar in_master a1 a2 a3 + a eval bar s1 s2 s3 +} {seen in master: {a1 a2 a3 s1 s2 s3}} + +# Part 8: Testing aliases for non-existent targets +test interp-9.1 {testing aliases for non-existent targets} { + catch {interp create a} + a alias zop nonexistent-command-in-master + list [catch {a eval zop} msg] $msg +} {1 {invalid command name "nonexistent-command-in-master"}} +test interp-9.2 {testing aliases for non-existent targets} { + catch {interp create a} + a alias zop nonexistent-command-in-master + proc nonexistent-command-in-master {} {return i_exist!} + a eval zop +} i_exist! + +if {[info command nonexistent-command-in-master] != ""} { + rename nonexistent-command-in-master {} +} + +# Part 9: Aliasing between interpreters +test interp-10.1 {testing aliasing between interpreters} { + catch {interp delete a} + catch {interp delete b} + interp create a + interp create b + interp alias a a_alias b b_alias 1 2 3 +} a_alias +test interp-10.2 {testing aliasing between interpreters} { + catch {interp delete a} + catch {interp delete b} + interp create a + interp create b + b eval {proc b_alias {args} {return [list got $args]}} + interp alias a a_alias b b_alias 1 2 3 + a eval a_alias a b c +} {got {1 2 3 a b c}} +test interp-10.3 {testing aliasing between interpreters} { + catch {interp delete a} + catch {interp delete b} + interp create a + interp create b + interp alias a a_alias b b_alias 1 2 3 + list [catch {a eval a_alias a b c} msg] $msg +} {1 {invalid command name "b_alias"}} +test interp-10.4 {testing aliasing between interpreters} { + catch {interp delete a} + interp create a + a alias a_alias puts + a aliases +} a_alias +test interp-10.5 {testing aliasing between interpreters} { + catch {interp delete a} + catch {interp delete b} + interp create a + interp create b + a alias a_alias puts + interp alias a a_del b b_del + interp delete b + a aliases +} a_alias +test interp-10.6 {testing aliasing between interpreters} { + catch {interp delete a} + catch {interp delete b} + interp create a + interp create b + interp alias a a_command b b_command a1 a2 a3 + b alias b_command in_master b1 b2 b3 + a eval a_command m1 m2 m3 +} {seen in master: {b1 b2 b3 a1 a2 a3 m1 m2 m3}} +test interp-10.7 {testing aliases between interpreters} { + catch {interp delete a} + interp create a + interp alias "" foo a zoppo + a eval {proc zoppo {x} {list $x $x $x}} + set x [foo 33] + a eval {rename zoppo {}} + interp alias "" foo a {} + equiv $x +} {33 33 33} + +# Part 10: Testing "interp target" +test interp-11.1 {testing interp target} { + list [catch {interp target} msg] $msg +} {1 {wrong # args: should be "interp target path alias"}} +test interp-11.2 {testing interp target} { + list [catch {interp target nosuchinterpreter foo} msg] $msg +} {1 {could not find interpreter "nosuchinterpreter"}} +test interp-11.3 {testing interp target} { + catch {interp delete a} + interp create a + a alias boo no_command + interp target a boo +} "" +test interp-11.4 {testing interp target} { + catch {interp delete x1} + interp create x1 + x1 eval interp create x2 + x1 eval x2 eval interp create x3 + catch {interp delete y1} + interp create y1 + y1 eval interp create y2 + y1 eval y2 eval interp create y3 + interp alias {x1 x2 x3} xcommand {y1 y2 y3} ycommand + interp target {x1 x2 x3} xcommand +} {y1 y2 y3} +test interp-11.5 {testing interp target} { + catch {interp delete x1} + interp create x1 + interp create {x1 x2} + interp create {x1 x2 x3} + catch {interp delete y1} + interp create y1 + interp create {y1 y2} + interp create {y1 y2 y3} + interp alias {x1 x2 x3} xcommand {y1 y2 y3} ycommand + list [catch {x1 eval {interp target {x2 x3} xcommand}} msg] $msg +} {1 {target interpreter for alias "xcommand" in path "x2 x3" is not my descendant}} +test interp-11.6 {testing interp target} { + foreach a [interp aliases] { + rename $a {} + } + list [catch {interp target {} foo} msg] $msg +} {1 {alias "foo" in path "" not found}} +test interp-11.7 {testing interp target} { + catch {interp delete a} + interp create a + list [catch {interp target a foo} msg] $msg +} {1 {alias "foo" in path "a" not found}} + +# Part 11: testing "interp issafe" +test interp-12.1 {testing interp issafe} { + interp issafe +} 0 +test interp-12.2 {testing interp issafe} { + catch {interp delete a} + interp create a + interp issafe a +} 0 +test interp-12.3 {testing interp issafe} { + catch {interp delete a} + interp create a + interp create {a x3} -safe + interp issafe {a x3} +} 1 +test interp-12.4 {testing interp issafe} { + catch {interp delete a} + interp create a + interp create {a x3} -safe + interp create {a x3 foo} + interp issafe {a x3 foo} +} 1 + +# Part 12: testing interpreter object command "issafe" sub-command +test interp-13.1 {testing foo issafe} { + catch {interp delete a} + interp create a + a issafe +} 0 +test interp-13.2 {testing foo issafe} { + catch {interp delete a} + interp create a + interp create {a x3} -safe + a eval x3 issafe +} 1 +test interp-13.3 {testing foo issafe} { + catch {interp delete a} + interp create a + interp create {a x3} -safe + interp create {a x3 foo} + a eval x3 eval foo issafe +} 1 + +# part 14: testing interp aliases +test interp-14.1 {testing interp aliases} { + interp aliases +} "" +test interp-14.2 {testing interp aliases} { + catch {interp delete a} + interp create a + a alias a1 puts + a alias a2 puts + a alias a3 puts + lsort [interp aliases a] +} {a1 a2 a3} +test interp-14.3 {testing interp aliases} { + catch {interp delete a} + interp create a + interp create {a x3} + interp alias {a x3} froboz "" puts + interp aliases {a x3} +} froboz + +# part 15: testing file sharing +test interp-15.1 {testing file sharing} { + catch {interp delete z} + interp create z + z eval close stdout + list [catch {z eval puts hello} msg] $msg +} {1 {can not find channel named "stdout"}} +catch {removeFile file-15.2} +test interp-15.2 {testing file sharing} { + catch {interp delete z} + interp create z + set f [open file-15.2 w] + interp share "" $f z + z eval puts $f hello + z eval close $f + close $f +} "" +catch {removeFile file-15.2} +test interp-15.3 {testing file sharing} { + catch {interp delete xsafe} + interp create xsafe -safe + list [catch {xsafe eval puts hello} msg] $msg +} {1 {can not find channel named "stdout"}} +catch {removeFile file-15.4} +test interp-15.4 {testing file sharing} { + catch {interp delete xsafe} + interp create xsafe -safe + set f [open file-15.4 w] + interp share "" $f xsafe + xsafe eval puts $f hello + xsafe eval close $f + close $f +} "" +catch {removeFile file-15.4} +test interp-15.5 {testing file sharing} { + catch {interp delete xsafe} + interp create xsafe -safe + interp share "" stdout xsafe + list [catch {xsafe eval gets stdout} msg] $msg +} {1 {channel "stdout" wasn't opened for reading}} +catch {removeFile file-15.6} +test interp-15.6 {testing file sharing} { + catch {interp delete xsafe} + interp create xsafe -safe + set f [open file-15.6 w] + interp share "" $f xsafe + set x [list [catch [list xsafe eval gets $f] msg] $msg] + xsafe eval close $f + close $f + string compare [string tolower $x] \ + [list 1 [format "channel \"%s\" wasn't opened for reading" $f]] +} 0 +catch {removeFile file-15.6} +catch {removeFile file-15.7} +test interp-15.7 {testing file transferring} { + catch {interp delete xsafe} + interp create xsafe -safe + set f [open file-15.7 w] + interp transfer "" $f xsafe + xsafe eval puts $f hello + xsafe eval close $f +} "" +catch {removeFile file-15.7} +catch {removeFile file-15.8} +test interp-15.8 {testing file transferring} { + catch {interp delete xsafe} + interp create xsafe -safe + set f [open file-15.8 w] + interp transfer "" $f xsafe + xsafe eval close $f + set x [list [catch {close $f} msg] $msg] + string compare [string tolower $x] \ + [list 1 [format "can not find channel named \"%s\"" $f]] +} 0 +catch {removeFile file-15.8} + +# +# Torture tests for interpreter deletion order +# +proc kill {} {interp delete xxx} + +test interp-15.9 {testing deletion order} { + catch {interp delete xxx} + interp create xxx + xxx alias kill kill + list [catch {xxx eval kill} msg] $msg +} {0 {}} +test interp-16.1 {testing deletion order} { + catch {interp delete xxx} + interp create xxx + interp create {xxx yyy} + interp alias {xxx yyy} kill "" kill + list [catch {interp eval {xxx yyy} kill} msg] $msg +} {0 {}} +test interp-16.2 {testing deletion order} { + catch {interp delete xxx} + interp create xxx + interp create {xxx yyy} + interp alias {xxx yyy} kill "" kill + list [catch {xxx eval yyy eval kill} msg] $msg +} {0 {}} +test interp-16.3 {testing deletion order} { + catch {interp delete xxx} + interp create xxx + interp create ddd + xxx alias kill kill + interp alias ddd kill xxx kill + set x [ddd eval kill] + interp delete ddd + set x +} "" +test interp-16.4 {testing deletion order} { + catch {interp delete xxx} + interp create xxx + interp create {xxx yyy} + interp alias {xxx yyy} kill "" kill + interp create ddd + interp alias ddd kill {xxx yyy} kill + set x [ddd eval kill] + interp delete ddd + set x +} "" +test interp-16.5 {testing deletion order, bgerror} { + catch {interp delete xxx} + interp create xxx + xxx eval {proc bgerror {args} {exit}} + xxx alias exit kill xxx + proc kill {i} {interp delete $i} + xxx eval after 100 expr a + b + after 200 + update + interp exists xxx +} 0 + +# +# Alias loop prevention testing. +# + +test interp-17.1 {alias loop prevention} { + list [catch {interp alias {} a {} a} msg] $msg +} {1 {cannot define or rename alias "a": would create a loop}} +test interp-17.2 {alias loop prevention} { + catch {interp delete x} + interp create x + x alias a loop + list [catch {interp alias {} loop x a} msg] $msg +} {1 {cannot define or rename alias "loop": would create a loop}} +test interp-17.3 {alias loop prevention} { + catch {interp delete x} + interp create x + interp alias x a x b + list [catch {interp alias x b x a} msg] $msg +} {1 {cannot define or rename alias "b": would create a loop}} +test interp-17.4 {alias loop prevention} { + catch {interp delete x} + interp create x + interp alias x b x a + list [catch {x eval rename b a} msg] $msg +} {1 {cannot define or rename alias "b": would create a loop}} +test interp-17.5 {alias loop prevention} { + catch {interp delete x} + interp create x + x alias z l1 + interp alias {} l2 x z + list [catch {rename l2 l1} msg] $msg +} {1 {cannot define or rename alias "l2": would create a loop}} + +# +# Test robustness of Tcl_DeleteInterp when applied to a slave interpreter. +# If there are bugs in the implementation these tests are likely to expose +# the bugs as a core dump. +# + +if {[info commands testinterpdelete] != ""} { + test interp-18.1 {testing Tcl_DeleteInterp vs slaves} { + list [catch {testinterpdelete} msg] $msg + } {1 {wrong # args: should be "testinterpdelete path"}} + test interp-18.2 {testing Tcl_DeleteInterp vs slaves} { + catch {interp delete a} + interp create a + testinterpdelete a + } "" + test interp-18.3 {testing Tcl_DeleteInterp vs slaves} { + catch {interp delete a} + interp create a + interp create {a b} + testinterpdelete {a b} + } "" + test interp-18.4 {testing Tcl_DeleteInterp vs slaves} { + catch {interp delete a} + interp create a + interp create {a b} + testinterpdelete a + } "" + test interp-18.5 {testing Tcl_DeleteInterp vs slaves} { + catch {interp delete a} + interp create a + interp create {a b} + interp alias {a b} dodel {} dodel + proc dodel {x} {testinterpdelete $x} + list [catch {interp eval {a b} {dodel {a b}}} msg] $msg + } {0 {}} + test interp-18.6 {testing Tcl_DeleteInterp vs slaves} { + catch {interp delete a} + interp create a + interp create {a b} + interp alias {a b} dodel {} dodel + proc dodel {x} {testinterpdelete $x} + list [catch {interp eval {a b} {dodel a}} msg] $msg + } {0 {}} + test interp-18.7 {eval in deleted interp} { + catch {interp delete a} + interp create a + a eval { + proc dodel {} { + delme + dosomething else + } + proc dosomething args { + puts "I should not have been called!!" + } + } + a alias delme dela + proc dela {} {interp delete a} + list [catch {a eval dodel} msg] $msg + } {1 {attempt to call eval in deleted interpreter}} + test interp-18.8 {eval in deleted interp} { + catch {interp delete a} + interp create a + a eval { + interp create b + b eval { + proc dodel {} { + dela + } + } + proc foo {} { + b eval dela + dosomething else + } + proc dosomething args { + puts "I should not have been called!!" + } + } + interp alias {a b} dela {} dela + proc dela {} {interp delete a} + list [catch {a eval foo} msg] $msg + } {1 {attempt to call eval in deleted interpreter}} +} + +# Test alias deletion + +test interp-19.1 {alias deletion} { + catch {interp delete a} + interp create a + interp alias a foo a bar + set s [interp alias a foo {}] + interp delete a + set s +} {} +test interp-19.2 {alias deletion} { + catch {interp delete a} + interp create a + catch {interp alias a foo {}} msg + interp delete a + set msg +} {alias "foo" not found} +test interp-19.3 {alias deletion} { + catch {interp delete a} + interp create a + interp alias a foo a bar + interp eval a {rename foo zop} + interp alias a foo a zop + catch {interp eval a foo} msg + interp delete a + set msg +} {invalid command name "zop"} +test interp-19.4 {alias deletion} { + catch {interp delete a} + interp create a + interp alias a foo a bar + interp eval a {rename foo zop} + catch {interp eval a foo} msg + interp delete a + set msg +} {invalid command name "foo"} +test interp-19.5 {alias deletion} { + catch {interp delete a} + interp create a + interp eval a {proc bar {} {return 1}} + interp alias a foo a bar + interp eval a {rename foo zop} + catch {interp eval a zop} msg + interp delete a + set msg +} 1 +test interp-19.6 {alias deletion} { + catch {interp delete a} + interp create a + interp alias a foo a bar + interp eval a {rename foo zop} + interp alias a foo a zop + set s [interp aliases a] + interp delete a + set s +} foo +test interp-19.7 {alias deletion, renaming} { + catch {interp delete a} + interp create a + interp alias a foo a bar + interp eval a rename foo blotz + interp alias a foo {} + set s [interp aliases a] + interp delete a + set s +} {} +test interp-19.8 {alias deletion, renaming} { + catch {interp delete a} + interp create a + interp alias a foo a bar + interp eval a rename foo blotz + set l "" + lappend l [interp aliases a] + interp alias a foo {} + lappend l [interp aliases a] + interp delete a + set l +} {foo {}} +test interp-19.9 {alias deletion, renaming} { + catch {interp delete a} + interp create a + interp alias a foo a bar + interp eval a rename foo blotz + interp eval a {proc foo {} {expr 34 * 34}} + interp alias a foo {} + set l [interp eval a foo] + interp delete a + set l +} 1156 + +test interp-20.1 {interp hide, interp expose and interp invokehidden} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + a eval {proc foo {} {}} + a hide foo + catch {a eval foo something} msg + interp delete a + set msg +} {invalid command name "foo"} +test interp-20.2 {interp hide, interp expose and interp invokehidden} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + a hide list + set l "" + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + a expose list + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + interp delete a + set l +} {1 {invalid command name "list"} 0 {1 2 3}} +test interp-20.3 {interp hide, interp expose and interp invokehidden} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + a hide list + set l "" + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + lappend l [catch {a invokehidden list 1 2 3} msg] + lappend l $msg + a expose list + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + interp delete a + set l +} {1 {invalid command name "list"} 0 {1 2 3} 0 {1 2 3}} +test interp-20.4 {interp hide, interp expose and interp invokehidden -- passing {}} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + a hide list + set l "" + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + lappend l [catch {a invokehidden list {"" 1 2 3}} msg] + lappend l $msg + a expose list + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + interp delete a + set l +} {1 {invalid command name "list"} 0 {{"" 1 2 3}} 0 {1 2 3}} +test interp-20.5 {interp hide, interp expose and interp invokehidden -- passing {}} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + a hide list + set l "" + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + lappend l [catch {a invokehidden list {{} 1 2 3}} msg] + lappend l $msg + a expose list + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + interp delete a + set l +} {1 {invalid command name "list"} 0 {{{} 1 2 3}} 0 {1 2 3}} +test interp-20.6 {interp invokehidden -- eval args} { + catch {interp delete a} + interp create a + a hide list + set l "" + set z 45 + lappend l [catch {a invokehidden list $z 1 2 3} msg] + lappend l $msg + a expose list + lappend l [catch {a eval list $z 1 2 3} msg] + lappend l $msg + interp delete a + set l +} {0 {45 1 2 3} 0 {45 1 2 3}} +test interp-20.7 {interp invokehidden vs variable eval} { + catch {interp delete a} + interp create a + a hide list + set z 45 + set l "" + lappend l [catch {a invokehidden list {$z a b c}} msg] + lappend l $msg + interp delete a + set l +} {0 {{$z a b c}}} +test interp-20.8 {interp invokehidden vs variable eval} { + catch {interp delete a} + interp create a + a hide list + a eval set z 89 + set z 45 + set l "" + lappend l [catch {a invokehidden list {$z a b c}} msg] + lappend l $msg + interp delete a + set l +} {0 {{$z a b c}}} +test interp-20.9 {interp invokehidden vs variable eval} { + catch {interp delete a} + interp create a + a hide list + a eval set z 89 + set z 45 + set l "" + lappend l [catch {a invokehidden list $z {$z a b c}} msg] + lappend l $msg + interp delete a + set l +} {0 {45 {$z a b c}}} +test interp-20.10 {interp hide, interp expose and interp invokehidden} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + a eval {proc foo {} {}} + interp hide a foo + catch {interp eval a foo something} msg + interp delete a + set msg +} {invalid command name "foo"} +test interp-20.11 {interp hide, interp expose and interp invokehidden} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + interp hide a list + set l "" + lappend l [catch {interp eval a {list 1 2 3}} msg] + lappend l $msg + interp expose a list + lappend l [catch {interp eval a {list 1 2 3}} msg] + lappend l $msg + interp delete a + set l +} {1 {invalid command name "list"} 0 {1 2 3}} +test interp-20.12 {interp hide, interp expose and interp invokehidden} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + interp hide a list + set l "" + lappend l [catch {interp eval a {list 1 2 3}} msg] + lappend l $msg + lappend l [catch {interp invokehidden a list 1 2 3} msg] + lappend l $msg + interp expose a list + lappend l [catch {interp eval a {list 1 2 3}} msg] + lappend l $msg + interp delete a + set l +} {1 {invalid command name "list"} 0 {1 2 3} 0 {1 2 3}} +test interp-20.13 {interp hide, interp expose, interp invokehidden -- passing {}} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + interp hide a list + set l "" + lappend l [catch {interp eval a {list 1 2 3}} msg] + lappend l $msg + lappend l [catch {interp invokehidden a list {"" 1 2 3}} msg] + lappend l $msg + interp expose a list + lappend l [catch {interp eval a {list 1 2 3}} msg] + lappend l $msg + interp delete a + set l +} {1 {invalid command name "list"} 0 {{"" 1 2 3}} 0 {1 2 3}} +test interp-20.14 {interp hide, interp expose, interp invokehidden -- passing {}} { + catch {interp delete a} + interp create a + a eval {proc unknown {x args} {error "invalid command name \"$x\""}} + interp hide a list + set l "" + lappend l [catch {interp eval a {list 1 2 3}} msg] + lappend l $msg + lappend l [catch {interp invokehidden a list {{} 1 2 3}} msg] + lappend l $msg + interp expose a list + lappend l [catch {a eval {list 1 2 3}} msg] + lappend l $msg + interp delete a + set l +} {1 {invalid command name "list"} 0 {{{} 1 2 3}} 0 {1 2 3}} +test interp-20.15 {interp invokehidden -- eval args} { + catch {interp delete a} + interp create a + interp hide a list + set l "" + set z 45 + lappend l [catch {interp invokehidden a list $z 1 2 3} msg] + lappend l $msg + a expose list + lappend l [catch {interp eval a list $z 1 2 3} msg] + lappend l $msg + interp delete a + set l +} {0 {45 1 2 3} 0 {45 1 2 3}} +test interp-20.16 {interp invokehidden vs variable eval} { + catch {interp delete a} + interp create a + interp hide a list + set z 45 + set l "" + lappend l [catch {interp invokehidden a list {$z a b c}} msg] + lappend l $msg + interp delete a + set l +} {0 {{$z a b c}}} +test interp-20.17 {interp invokehidden vs variable eval} { + catch {interp delete a} + interp create a + interp hide a list + a eval set z 89 + set z 45 + set l "" + lappend l [catch {interp invokehidden a list {$z a b c}} msg] + lappend l $msg + interp delete a + set l +} {0 {{$z a b c}}} +test interp-20.18 {interp invokehidden vs variable eval} { + catch {interp delete a} + interp create a + interp hide a list + a eval set z 89 + set z 45 + set l "" + lappend l [catch {interp invokehidden a list $z {$z a b c}} msg] + lappend l $msg + interp delete a + set l +} {0 {45 {$z a b c}}} +test interp-20.19 {interp invokehidden vs nested commands} { + catch {interp delete a} + interp create a + a hide list + set l [a invokehidden list {[list x y z] f g h} z] + interp delete a + set l +} {{[list x y z] f g h} z} +test interp-20.20 {interp invokehidden vs nested commands} { + catch {interp delete a} + interp create a + a hide list + set l [interp invokehidden a list {[list x y z] f g h} z] + interp delete a + set l +} {{[list x y z] f g h} z} +test interp-20.21 {interp hide vs safety} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [catch {a hide list} msg] + lappend l $msg + interp delete a + set l +} {0 {}} +test interp-20.22 {interp hide vs safety} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [catch {interp hide a list} msg] + lappend l $msg + interp delete a + set l +} {0 {}} +test interp-20.23 {interp hide vs safety} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [catch {a eval {interp hide {} list}} msg] + lappend l $msg + interp delete a + set l +} {1 {permission denied: safe interpreter cannot hide commands}} +test interp-20.24 {interp hide vs safety} { + catch {interp delete a} + interp create a -safe + interp create {a b} + set l "" + lappend l [catch {a eval {interp hide b list}} msg] + lappend l $msg + interp delete a + set l +} {1 {permission denied: safe interpreter cannot hide commands}} +test interp-20.25 {interp hide vs safety} { + catch {interp delete a} + interp create a -safe + interp create {a b} + set l "" + lappend l [catch {interp hide {a b} list} msg] + lappend l $msg + interp delete a + set l +} {0 {}} +test interp-20.26 {interp expoose vs safety} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [catch {a hide list} msg] + lappend l $msg + lappend l [catch {a expose list} msg] + lappend l $msg + interp delete a + set l +} {0 {} 0 {}} +test interp-20.27 {interp expose vs safety} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [catch {interp hide a list} msg] + lappend l $msg + lappend l [catch {interp expose a list} msg] + lappend l $msg + interp delete a + set l +} {0 {} 0 {}} +test interp-20.28 {interp expose vs safety} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [catch {a hide list} msg] + lappend l $msg + lappend l [catch {a eval {interp expose {} list}} msg] + lappend l $msg + interp delete a + set l +} {0 {} 1 {permission denied: safe interpreter cannot expose commands}} +test interp-20.29 {interp expose vs safety} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [catch {interp hide a list} msg] + lappend l $msg + lappend l [catch {a eval {interp expose {} list}} msg] + lappend l $msg + interp delete a + set l +} {0 {} 1 {permission denied: safe interpreter cannot expose commands}} +test interp-20.30 {interp expose vs safety} { + catch {interp delete a} + interp create a -safe + interp create {a b} + set l "" + lappend l [catch {interp hide {a b} list} msg] + lappend l $msg + lappend l [catch {a eval {interp expose b list}} msg] + lappend l $msg + interp delete a + set l +} {0 {} 1 {permission denied: safe interpreter cannot expose commands}} +test interp-20.31 {interp expose vs safety} { + catch {interp delete a} + interp create a -safe + interp create {a b} + set l "" + lappend l [catch {interp hide {a b} list} msg] + lappend l $msg + lappend l [catch {interp expose {a b} list} msg] + lappend l $msg + interp delete a + set l +} {0 {} 0 {}} +test interp-20.32 {interp invokehidden vs safety} { + catch {interp delete a} + interp create a -safe + interp hide a list + set l "" + lappend l [catch {a eval {interp invokehidden {} list a b c}} msg] + lappend l $msg + interp delete a + set l +} {1 {not allowed to invoke hidden commands from safe interpreter}} +test interp-20.33 {interp invokehidden vs safety} { + catch {interp delete a} + interp create a -safe + interp hide a list + set l "" + lappend l [catch {a eval {interp invokehidden {} list a b c}} msg] + lappend l $msg + lappend l [catch {a invokehidden list a b c} msg] + lappend l $msg + interp delete a + set l +} {1 {not allowed to invoke hidden commands from safe interpreter}\ +0 {a b c}} +test interp-20.34 {interp invokehidden vs safety} { + catch {interp delete a} + interp create a -safe + interp create {a b} + interp hide {a b} list + set l "" + lappend l [catch {a eval {interp invokehidden b list a b c}} msg] + lappend l $msg + lappend l [catch {interp invokehidden {a b} list a b c} msg] + lappend l $msg + interp delete a + set l +} {1 {not allowed to invoke hidden commands from safe interpreter}\ +0 {a b c}} +test interp-20.35 {invokehidden at local level} { + catch {interp delete a} + interp create a + a eval { + proc p1 {} { + set z 90 + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a h1 + } + set r [interp eval a p1] + interp delete a + set r +} 91 +test interp-20.36 {invokehidden at local level} { + catch {interp delete a} + interp create a + a eval { + set z 90 + proc p1 {} { + global z + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a h1 + } + set r [interp eval a p1] + interp delete a + set r +} 91 +test interp-20.37 {invokehidden at local level} { + catch {interp delete a} + interp create a + a eval { + proc p1 {} { + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a h1 + } + set r [interp eval a p1] + interp delete a + set r +} 91 +test interp-20.38 {invokehidden at global level} { + catch {interp delete a} + interp create a + a eval { + proc p1 {} { + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a -global h1 + } + set r [catch {interp eval a p1} msg] + interp delete a + list $r $msg +} {1 {can't read "z": no such variable}} +test interp-20.39 {invokehidden at global level} { + catch {interp delete a} + interp create a + a eval { + proc p1 {} { + global z + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a -global h1 + } + set r [catch {interp eval a p1} msg] + interp delete a + list $r $msg +} {0 91} +test interp-20.40 {safe, invokehidden at local level} { + catch {interp delete a} + interp create a -safe + a eval { + proc p1 {} { + set z 90 + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a h1 + } + set r [interp eval a p1] + interp delete a + set r +} 91 +test interp-20.41 {safe, invokehidden at local level} { + catch {interp delete a} + interp create a -safe + a eval { + set z 90 + proc p1 {} { + global z + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a h1 + } + set r [interp eval a p1] + interp delete a + set r +} 91 +test interp-20.42 {safe, invokehidden at local level} { + catch {interp delete a} + interp create a -safe + a eval { + proc p1 {} { + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a h1 + } + set r [interp eval a p1] + interp delete a + set r +} 91 +test interp-20.43 {invokehidden at global level} { + catch {interp delete a} + interp create a + a eval { + proc p1 {} { + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a -global h1 + } + set r [catch {interp eval a p1} msg] + interp delete a + list $r $msg +} {1 {can't read "z": no such variable}} +test interp-20.44 {invokehidden at global level} { + catch {interp delete a} + interp create a + a eval { + proc p1 {} { + global z + a1 + set z + } + proc h1 {} { + upvar z z + set z 91 + } + } + a hide h1 + a alias a1 a1 + proc a1 {} { + interp invokehidden a -global h1 + } + set r [catch {interp eval a p1} msg] + interp delete a + list $r $msg +} {0 91} +test interp-20.45 {interp hide vs namespaces} { + catch {interp delete a} + interp create a + a eval { + namespace eval foo {} + proc foo::x {} {} + } + set l [list [catch {interp hide a foo::x} msg] $msg] + interp delete a + set l +} {1 {cannot use namespace qualifiers as hidden commandtoken (rename)}} +test interp-20.46 {interp hide vs namespaces} { + catch {interp delete a} + interp create a + a eval { + namespace eval foo {} + proc foo::x {} {} + } + set l [list [catch {interp hide a foo::x x} msg] $msg] + interp delete a + set l +} {1 {can only hide global namespace commands (use rename then hide)}} +test interp-20.47 {interp hide vs namespaces} { + catch {interp delete a} + interp create a + a eval { + proc x {} {} + } + set l [list [catch {interp hide a x foo::x} msg] $msg] + interp delete a + set l +} {1 {cannot use namespace qualifiers as hidden commandtoken (rename)}} +test interp-20.48 {interp hide vs namespaces} { + catch {interp delete a} + interp create a + a eval { + namespace eval foo {} + proc foo::x {} {} + } + set l [list [catch {interp hide a foo::x bar::x} msg] $msg] + interp delete a + set l +} {1 {cannot use namespace qualifiers as hidden commandtoken (rename)}} + +test interp-21.1 {interp hidden} { + interp hidden {} +} "" +test interp-21.2 {interp hidden} { + interp hidden +} "" +test interp-21.3 {interp hidden vs interp hide, interp expose} { + set l "" + lappend l [interp hidden] + interp hide {} pwd + lappend l [interp hidden] + interp expose {} pwd + lappend l [interp hidden] + set l +} {{} pwd {}} +test interp-21.4 {interp hidden} { + catch {interp delete a} + interp create a + set l [interp hidden a] + interp delete a + set l +} "" +test interp-21.5 {interp hidden} { + catch {interp delete a} + interp create -safe a + set l [lsort [interp hidden a]] + interp delete a + set l +} $hidden_cmds +test interp-21.6 {interp hidden vs interp hide, interp expose} { + catch {interp delete a} + interp create a + set l "" + lappend l [interp hidden a] + interp hide a pwd + lappend l [interp hidden a] + interp expose a pwd + lappend l [interp hidden a] + interp delete a + set l +} {{} pwd {}} +test interp-21.7 {interp hidden} { + catch {interp delete a} + interp create a + set l [a hidden] + interp delete a + set l +} "" +test interp-21.8 {interp hidden} { + catch {interp delete a} + interp create a -safe + set l [lsort [a hidden]] + interp delete a + set l +} $hidden_cmds +test interp-21.9 {interp hidden vs interp hide, interp expose} { + catch {interp delete a} + interp create a + set l "" + lappend l [a hidden] + a hide pwd + lappend l [a hidden] + a expose pwd + lappend l [a hidden] + interp delete a + set l +} {{} pwd {}} + +test interp-22.1 {testing interp marktrusted} { + catch {interp delete a} + interp create a + set l "" + lappend l [a issafe] + lappend l [a marktrusted] + lappend l [a issafe] + interp delete a + set l +} {0 {} 0} +test interp-22.2 {testing interp marktrusted} { + catch {interp delete a} + interp create a + set l "" + lappend l [interp issafe a] + lappend l [interp marktrusted a] + lappend l [interp issafe a] + interp delete a + set l +} {0 {} 0} +test interp-22.3 {testing interp marktrusted} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [a issafe] + lappend l [a marktrusted] + lappend l [a issafe] + interp delete a + set l +} {1 {} 0} +test interp-22.4 {testing interp marktrusted} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [interp issafe a] + lappend l [interp marktrusted a] + lappend l [interp issafe a] + interp delete a + set l +} {1 {} 0} +test interp-22.5 {testing interp marktrusted} { + catch {interp delete a} + interp create a -safe + interp create {a b} + catch {a eval {interp marktrusted b}} msg + interp delete a + set msg +} {"interp marktrusted" can only be invoked from a trusted interpreter} +test interp-22.6 {testing interp marktrusted} { + catch {interp delete a} + interp create a -safe + interp create {a b} + catch {a eval {b marktrusted}} msg + interp delete a + set msg +} {"b marktrusted" can only be invoked from a trusted interpreter} +test interp-22.7 {testing interp marktrusted} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [interp issafe a] + interp marktrusted a + interp create {a b} + lappend l [interp issafe a] + lappend l [interp issafe {a b}] + interp delete a + set l +} {1 0 0} +test interp-22.8 {testing interp marktrusted} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [interp issafe a] + interp create {a b} + lappend l [interp issafe {a b}] + interp marktrusted a + interp create {a c} + lappend l [interp issafe a] + lappend l [interp issafe {a c}] + interp delete a + set l +} {1 1 0 0} +test interp-22.9 {testing interp marktrusted} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [interp issafe a] + interp create {a b} + lappend l [interp issafe {a b}] + interp marktrusted {a b} + lappend l [interp issafe a] + lappend l [interp issafe {a b}] + interp create {a b c} + lappend l [interp issafe {a b c}] + interp delete a + set l +} {1 1 1 0 0} + +test interp-23.1 {testing hiding vs aliases} { + catch {interp delete a} + interp create a + set l "" + lappend l [interp hidden a] + a alias bar bar + lappend l [interp aliases a] + lappend l [interp hidden a] + a hide bar + lappend l [interp aliases a] + lappend l [interp hidden a] + a alias bar {} + lappend l [interp aliases a] + lappend l [interp hidden a] + interp delete a + set l +} {{} bar {} bar bar {} {}} +test interp-23.2 {testing hiding vs aliases} {pc || unix} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [lsort [interp hidden a]] + a alias bar bar + lappend l [interp aliases a] + lappend l [lsort [interp hidden a]] + a hide bar + lappend l [interp aliases a] + lappend l [lsort [interp hidden a]] + a alias bar {} + lappend l [interp aliases a] + lappend l [lsort [interp hidden a]] + interp delete a + set l +} {{cd exec exit fconfigure file glob load open pwd socket source} bar {cd exec exit fconfigure file glob load open pwd socket source} bar {bar cd exec exit fconfigure file glob load open pwd socket source} {} {cd exec exit fconfigure file glob load open pwd socket source}} + +test interp-23.3 {testing hiding vs aliases} {macOnly} { + catch {interp delete a} + interp create a -safe + set l "" + lappend l [lsort [interp hidden a]] + a alias bar bar + lappend l [interp aliases a] + lappend l [lsort [interp hidden a]] + a hide bar + lappend l [interp aliases a] + lappend l [lsort [interp hidden a]] + a alias bar {} + lappend l [interp aliases a] + lappend l [lsort [interp hidden a]] + interp delete a + set l +} {{beep cd echo exit fconfigure file glob load ls open pwd socket source} bar {beep cd echo exit fconfigure file glob load ls open pwd socket source} bar {bar beep cd echo exit fconfigure file glob load ls open pwd socket source} {} {beep cd echo exit fconfigure file glob load ls open pwd socket source}} + +test interp-24.1 {result resetting on error} { + catch {interp delete a} + interp create a + proc foo args {error $args} + interp alias a foo {} foo + set l [interp eval a { + set l {} + lappend l [catch {foo 1 2 3} msg] + lappend l $msg + lappend l [catch {foo 3 4 5} msg] + lappend l $msg + set l + }] + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.2 {result resetting on error} { + catch {interp delete a} + interp create a -safe + proc foo args {error $args} + interp alias a foo {} foo + set l [interp eval a { + set l {} + lappend l [catch {foo 1 2 3} msg] + lappend l $msg + lappend l [catch {foo 3 4 5} msg] + lappend l $msg + set l + }] + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.3 {result resetting on error} { + catch {interp delete a} + interp create a + interp create {a b} + interp eval a { + proc foo args {error $args} + } + interp alias {a b} foo a foo + set l [interp eval {a b} { + set l {} + lappend l [catch {foo 1 2 3} msg] + lappend l $msg + lappend l [catch {foo 3 4 5} msg] + lappend l $msg + set l + }] + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.4 {result resetting on error} { + catch {interp delete a} + interp create a -safe + interp create {a b} + interp eval a { + proc foo args {error $args} + } + interp alias {a b} foo a foo + set l [interp eval {a b} { + set l {} + lappend l [catch {foo 1 2 3} msg] + lappend l $msg + lappend l [catch {foo 3 4 5} msg] + lappend l $msg + set l + }] + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.5 {result resetting on error} { + catch {interp delete a} + catch {interp delete b} + interp create a + interp create b + interp eval a { + proc foo args {error $args} + } + interp alias b foo a foo + set l [interp eval b { + set l {} + lappend l [catch {foo 1 2 3} msg] + lappend l $msg + lappend l [catch {foo 3 4 5} msg] + lappend l $msg + set l + }] + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.6 {result resetting on error} { + catch {interp delete a} + catch {interp delete b} + interp create a -safe + interp create b -safe + interp eval a { + proc foo args {error $args} + } + interp alias b foo a foo + set l [interp eval b { + set l {} + lappend l [catch {foo 1 2 3} msg] + lappend l $msg + lappend l [catch {foo 3 4 5} msg] + lappend l $msg + set l + }] + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.7 {result resetting on error} { + catch {interp delete a} + interp create a + interp eval a { + proc foo args {error $args} + } + set l {} + lappend l [catch {interp eval a foo 1 2 3} msg] + lappend l $msg + lappend l [catch {interp eval a foo 3 4 5} msg] + lappend l $msg + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.8 {result resetting on error} { + catch {interp delete a} + interp create a -safe + interp eval a { + proc foo args {error $args} + } + set l {} + lappend l [catch {interp eval a foo 1 2 3} msg] + lappend l $msg + lappend l [catch {interp eval a foo 3 4 5} msg] + lappend l $msg + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.9 {result resetting on error} { + catch {interp delete a} + interp create a + interp create {a b} + interp eval {a b} { + proc foo args {error $args} + } + interp eval a { + proc foo args { + eval interp eval b foo $args + } + } + set l {} + lappend l [catch {interp eval a foo 1 2 3} msg] + lappend l $msg + lappend l [catch {interp eval a foo 3 4 5} msg] + lappend l $msg + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.10 {result resetting on error} { + catch {interp delete a} + interp create a -safe + interp create {a b} + interp eval {a b} { + proc foo args {error $args} + } + interp eval a { + proc foo args { + eval interp eval b foo $args + } + } + set l {} + lappend l [catch {interp eval a foo 1 2 3} msg] + lappend l $msg + lappend l [catch {interp eval a foo 3 4 5} msg] + lappend l $msg + interp delete a + set l +} {1 {1 2 3} 1 {3 4 5}} +test interp-24.11 {result resetting on error} { + catch {interp delete a} + interp create a + interp create {a b} + interp eval {a b} { + proc foo args {error $args} + } + interp eval a { + proc foo args { + set l {} + lappend l [catch {eval interp eval b foo $args} msg] + lappend l $msg + lappend l [catch {eval interp eval b foo $args} msg] + lappend l $msg + set l + } + } + set l [interp eval a foo 1 2 3] + interp delete a + set l +} {1 {1 2 3} 1 {1 2 3}} +test interp-24.12 {result resetting on error} { + catch {interp delete a} + interp create a -safe + interp create {a b} + interp eval {a b} { + proc foo args {error $args} + } + interp eval a { + proc foo args { + set l {} + lappend l [catch {eval interp eval b foo $args} msg] + lappend l $msg + lappend l [catch {eval interp eval b foo $args} msg] + lappend l $msg + set l + } + } + set l [interp eval a foo 1 2 3] + interp delete a + set l +} {1 {1 2 3} 1 {1 2 3}} + +unset hidden_cmds + +test interp-25.1 {testing aliasing of string commands} { + catch {interp delete a} + interp create a + a alias exec foo ;# Relies on exec being a string command! + interp delete a +} "" + + +# Interps result transmission +test interp-26.1 {result code transmission 1} {knownBug} { + # This test currently fails ! (only ok/error are passed, not the other + # codes). Fixing the code is thus needed... -- dl + # (the only other acceptable result list would be + # {-1 0 1 0 3 4 5} because of the way return -code return(=2) works) + # test that all the possibles error codes from Tcl get passed + catch {interp delete a} + interp create a + interp eval a {proc ret {code} {return -code $code $code}} + set res {} + # use a for so if a return -code break 'escapes' we would notice + for {set code -1} {$code<=5} {incr code} { + lappend res [catch {interp eval a ret $code} msg] + } + interp delete a + set res +} {-1 0 1 2 3 4 5} + +test interp-26.2 {result code transmission 2} {knownBug} { + # This test currently fails ! (error is cleared) + # Code fixing is needed... -- dl + # (the only other acceptable result list would be + # {-1 0 1 0 3 4 5} because of the way return -code return(=2) works) + # test that all the possibles error codes from Tcl get passed + set interp [interp create]; + proc MyTestAlias {interp args} { + global aliasTrace; + lappend aliasTrace $args; + eval interp invokehidden [list $interp] $args + } + foreach c {return} { + interp hide $interp $c; + interp alias $interp $c {} MyTestAlias $interp $c; + } + interp eval $interp {proc ret {code} {return -code $code $code}} + set res {} + set aliasTrace {} + for {set code -1} {$code<=5} {incr code} { + lappend res [catch {interp eval $interp ret $code} msg] + } + interp delete $interp; + list $res +} {-1 0 1 2 3 4 5} + +test interp-26.3 {errorInfo transmission : regular interps} { + set interp [interp create]; + proc MyError {secret} { + return -code error "msg" + } + proc MyTestAlias {interp args} { + MyError "some secret" + } + interp alias $interp test {} MyTestAlias $interp; + set res [interp eval $interp {catch test;set errorInfo}] + interp delete $interp; + set res +} {msg + while executing +"MyError "some secret"" + (procedure "test" line 2) + invoked from within +"catch test"} + +test interp-26.4 {errorInfo transmission : safe interps} {knownBug} { + # this test fails because the errorInfo is fully transmitted + # whether the interp is safe or not. this is maybe a feature + # and not a bug. + set interp [interp create -safe]; + proc MyError {secret} { + return -code error "msg" + } + proc MyTestAlias {interp args} { + MyError "some secret" + } + interp alias $interp test {} MyTestAlias $interp; + set res [interp eval $interp {catch test;set errorInfo}] + interp delete $interp; + set res +} {msg + while executing +"catch test"} + +# Interps & Namespaces +test interp-27.1 {interp aliases & namespaces} { + set i [interp create]; + set aliasTrace {}; + proc tstAlias {args} { + global aliasTrace; + lappend aliasTrace [list [namespace current] $args]; + } + $i alias foo::bar tstAlias foo::bar; + $i eval foo::bar test + interp delete $i + set aliasTrace; +} {{:: {foo::bar test}}} + +test interp-27.2 {interp aliases & namespaces} { + set i [interp create]; + set aliasTrace {}; + proc tstAlias {args} { + global aliasTrace; + lappend aliasTrace [list [namespace current] $args]; + } + $i alias foo::bar tstAlias foo::bar; + $i eval namespace eval foo {bar test} + interp delete $i + set aliasTrace; +} {{:: {foo::bar test}}} + +test interp-27.3 {interp aliases & namespaces} { + set i [interp create]; + set aliasTrace {}; + proc tstAlias {args} { + global aliasTrace; + lappend aliasTrace [list [namespace current] $args]; + } + interp eval $i {namespace eval foo {proc bar {} {error "bar called"}}} + interp alias $i foo::bar {} tstAlias foo::bar; + interp eval $i {namespace eval foo {bar test}} + interp delete $i + set aliasTrace; +} {{:: {foo::bar test}}} + +test interp-27.4 {interp aliases & namespaces} { + set i [interp create]; + namespace eval foo2 { + variable aliasTrace {}; + proc bar {args} { + variable aliasTrace; + lappend aliasTrace [list [namespace current] $args]; + } + } + $i alias foo::bar foo2::bar foo::bar; + $i eval namespace eval foo {bar test} + set r $foo2::aliasTrace; + namespace delete foo2; + set r +} {{::foo2 {foo::bar test}}} + +# the following tests are commented out while we don't support +# hiding in namespaces + +# test interp-27.5 {interp hidden & namespaces} { +# set i [interp create]; +# interp eval $i { +# namespace eval foo { +# proc bar {args} { +# return "bar called ([namespace current]) ($args)" +# } +# } +# } +# set res [list [interp eval $i {namespace eval foo {bar test1}}]] +# interp hide $i foo::bar; +# lappend res [list [catch {interp eval $i {namespace eval foo {bar test2}}} msg] $msg] +# interp delete $i; +# set res; +#} {{bar called (::foo) (test1)} {1 {invalid command name "bar"}}} + +# test interp-27.6 {interp hidden & aliases & namespaces} { +# set i [interp create]; +# set v root-master; +# namespace eval foo { +# variable v foo-master; +# proc bar {interp args} { +# variable v; +# list "master bar called ($v) ([namespace current]) ($args)"\ +# [interp invokehidden $interp foo::bar $args]; +# } +# } +# interp eval $i { +# namespace eval foo { +# namespace export * +# variable v foo-slave; +# proc bar {args} { +# variable v; +# return "slave bar called ($v) ([namespace current]) ($args)" +# } +# } +# } +# set res [list [interp eval $i {namespace eval foo {bar test1}}]] +# $i hide foo::bar; +# $i alias foo::bar foo::bar $i; +# set res [concat $res [interp eval $i { +# set v root-slave; +# namespace eval test { +# variable v foo-test; +# namespace import ::foo::*; +# bar test2 +# } +# }]] +# namespace delete foo; +# interp delete $i; +# set res +# } {{slave bar called (foo-slave) (::foo) (test1)} {master bar called (foo-master) (::foo) (test2)} {slave bar called (foo-slave) (::foo) (test2)}} + + +# test interp-27.7 {interp hidden & aliases & imports & namespaces} { +# set i [interp create]; +# set v root-master; +# namespace eval mfoo { +# variable v foo-master; +# proc bar {interp args} { +# variable v; +# list "master bar called ($v) ([namespace current]) ($args)"\ +# [interp invokehidden $interp test::bar $args]; +# } +# } +# interp eval $i { +# namespace eval foo { +# namespace export * +# variable v foo-slave; +# proc bar {args} { +# variable v; +# return "slave bar called ($v) ([info level 0]) ([uplevel namespace current]) ([namespace current]) ($args)" +# } +# } +# set v root-slave; +# namespace eval test { +# variable v foo-test; +# namespace import ::foo::*; +# } +# } +# set res [list [interp eval $i {namespace eval test {bar test1}}]] +# $i hide test::bar; +# $i alias test::bar mfoo::bar $i; +# set res [concat $res [interp eval $i {test::bar test2}]]; +# namespace delete mfoo; +# interp delete $i; +# set res +# } {{slave bar called (foo-slave) (bar test1) (::test) (::foo) (test1)} {master bar called (foo-master) (::mfoo) (test2)} {slave bar called (foo-slave) (test::bar test2) (::) (::foo) (test2)}} + +#test interp-27.8 {hiding, namespaces and integrity} { +# namespace eval foo { +# variable v 3; +# proc bar {} {variable v; set v} +# # next command would currently generate an unknown command "bar" error. +# interp hide {} bar; +# } +# namespace delete foo; +# list [catch {interp invokehidden {} foo} msg] $msg; +#} {1 {invalid hidden command name "foo"}} + + +test interp-28.1 {getting fooled by slave's namespace ?} { + set i [interp create -safe]; + proc master {interp args} {interp hide $interp list} + $i alias master master $i; + set r [interp eval $i { + namespace eval foo { + proc list {args} { + return "dummy foo::list"; + } + master; + } + info commands list + }] + interp delete $i; + set r +} {} + +# Tests of recursionlimit +# We need testsetrecursionlimit so we need Tcltest package +if {[catch {package require Tcltest} msg]} { + puts "This application hasn't been compiled with Tcltest" + puts "skipping remining interp tests that relies on it." +} else { + # +test interp-29.1 {recursion limit} { + set i [interp create] + load {} Tcltest $i + set r [interp eval $i { + testsetrecursionlimit 50 + proc p {} {incr ::i; p} + set i 0 + catch p + set i + }] + interp delete $i + set r +} 49 + +test interp-29.2 {recursion limit inheritance} { + set i [interp create] + load {} Tcltest $i + set ii [interp eval $i { + testsetrecursionlimit 50 + interp create + }] + set r [interp eval [list $i $ii] { + proc p {} {incr ::i; p} + set i 0 + catch p + set i + }] + interp delete $i + set r +} 49 + +# # Deep recursion (into interps when the regular one fails): +# # still crashes... +# proc p {} { +# if {[catch p ret]} { +# catch { +# set i [interp create] +# interp eval $i [list proc p {} [info body p]] +# interp eval $i p +# } +# interp delete $i +# return ok +# } +# return $ret +# } +# p + +# more tests needed... + +# Interp & stack +#test interp-29.1 {interp and stack (info level)} { +#} {} + +} + + +foreach i [interp slaves] { + interp delete $i +} diff --git a/tests/io.test b/tests/io.test new file mode 100644 index 0000000..2b6670f --- /dev/null +++ b/tests/io.test @@ -0,0 +1,5143 @@ +# Functionality covered: operation of all IO commands, and all procedures +# defined in generic/tclIO.c. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1994 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) io.test 1.131 97/09/22 11:15:05 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {"[info commands testchannel]" != "testchannel"} { + puts "Skipping io tests. This application does not seem to have the" + puts "testchannel command that is needed to run these tests." + return +} + +removeFile test1 +removeFile pipe + +# set up a long data file for some of the following tests + +set f [open longfile w] +fconfigure $f -eofchar {} -translation lf +for { set i 0 } { $i < 100 } { incr i} { + puts $f "#123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef +\#123456789abcdef01 +\#" + } +close $f + +set f [open cat w] +puts $f { + if {$argv == {}} { + set argv - + } + foreach name $argv { + if {$name == "-"} { + set f stdin + } elseif {[catch {open $name r} f] != 0} { + puts stderr $f + continue + } + while {[eof $f] == 0} { + puts -nonewline stdout [read $f] + } + if {$f != "stdin"} { + close $f + } + } +} +close $f + +# These tests are disabled until we decide what to do with "unsupported0". +# +#test io-1.7 {unsupported0 command} { +# removeFile test1 +# set f1 [open iocmd.test] +# set f2 [open test1 w] +# unsupported0 $f1 $f2 +# close $f1 +# catch {close $f2} +# set s1 [file size [info script]] +# set s2 [file size test1] +# set x ok +# if {"$s1" != "$s2"} { +# set x broken +# } +# set x +#} ok +#test io-1.8 {unsupported0 command} { +# removeFile test1 +# set f1 [open [info script]] +# set f2 [open test1 w] +# unsupported0 $f1 $f2 40 +# close $f1 +# close $f2 +# file size test1 +#} 40 +#test io-1.9 {unsupported0 command} { +# removeFile test1 +# set f1 [open [info script]] +# set f2 [open test1 w] +# unsupported0 $f1 $f2 -1 +# close $f1 +# close $f2 +# set x ok +# set s1 [file size [info script]] +# set s2 [file size test1] +# if {$s1 != $s2} { +# set x broken +# } +# set x +#} ok +#test io-1.10 {unsupported0 command} {unixOrPc} { +# removeFile pipe +# removeFile test1 +# set f1 [open pipe w] +# puts $f1 {puts ready} +# puts $f1 {gets stdin} +# puts $f1 {set f1 [open [info script] r]} +# puts $f1 {puts [read $f1 100]} +# puts $f1 {close $f1} +# close $f1 +# set f1 [open "|[list $tcltest pipe]" r+] +# gets $f1 +# puts $f1 ready +# flush $f1 +# set f2 [open test1 w] +# set c [unsupported0 $f1 $f2 40] +# catch {close $f1} +# close $f2 +# set s1 [file size test1] +# set x ok +# if {$s1 != "40"} { +# set x broken +# } +# list $c $x +#} {40 ok} + +# Test standard handle management. The functions tested are +# Tcl_SetStdChannel and Tcl_GetStdChannel. Incidentally we are +# also testing channel table management. + +if {$tcl_platform(platform) == "macintosh"} { + set consoleFileNames [list console0 console1 console2] +} else { + set consoleFileNames [lsort [testchannel open]] +} +test io-1.1 {Tcl_SetStdChannel and Tcl_GetStdChannel} { + set l "" + lappend l [fconfigure stdin -buffering] + lappend l [fconfigure stdout -buffering] + lappend l [fconfigure stderr -buffering] + lappend l [lsort [testchannel open]] + set l +} [list line line none $consoleFileNames] +test io-1.2 {Tcl_SetStdChannel and Tcl_GetStdChannel} { + interp create x + set l "" + lappend l [x eval {fconfigure stdin -buffering}] + lappend l [x eval {fconfigure stdout -buffering}] + lappend l [x eval {fconfigure stderr -buffering}] + interp delete x + set l +} {line line none} +test io-1.3 {Tcl_SetStdChannel & Tcl_GetStdChannel} {stdio} { + set f [open test1 w] + puts $f { + close stdin + close stdout + close stderr + set f [open test1 r] + set f2 [open test2 w] + set f3 [open test3 w] + puts stdout [gets stdin] + puts stdout out + puts stderr err + close $f + close $f2 + close $f3 + } + close $f + set result [exec $tcltest test1] + set f [open test2 r] + set f2 [open test3 r] + lappend result [read $f] [read $f2] + close $f + close $f2 + set result +} {{ +out +} {err +}} +# This test relies on the fact that the smallest available fd is used first. +test io-1.4 {Tcl_SetStdChannel & Tcl_GetStdChannel} {unixOnly} { + set f [open test1 w] + puts $f { close stdin + close stdout + close stderr + set f [open test1 r] + set f2 [open test2 w] + set f3 [open test3 w] + puts stdout [gets stdin] + puts stdout $f2 + puts stderr $f3 + close $f + close $f2 + close $f3 + } + close $f + set result [exec $tcltest test1] + set f [open test2 r] + set f2 [open test3 r] + lappend result [read $f] [read $f2] + close $f + close $f2 + set result +} {{ close stdin +file1 +} {file2 +}} +catch {interp delete z} +test io-1.5 {Tcl_GetChannel: stdio name translation} { + interp create z + eof stdin + catch {z eval flush stdin} msg1 + catch {z eval close stdin} msg2 + catch {z eval flush stdin} msg3 + set result [list $msg1 $msg2 $msg3] + interp delete z + set result +} {{channel "stdin" wasn't opened for writing} {} {can not find channel named "stdin"}} +test io-1.6 {Tcl_GetChannel: stdio name translation} { + interp create z + eof stdout + catch {z eval flush stdout} msg1 + catch {z eval close stdout} msg2 + catch {z eval flush stdout} msg3 + set result [list $msg1 $msg2 $msg3] + interp delete z + set result +} {{} {} {can not find channel named "stdout"}} +test io-1.7 {Tcl_GetChannel: stdio name translation} { + interp create z + eof stderr + catch {z eval flush stderr} msg1 + catch {z eval close stderr} msg2 + catch {z eval flush stderr} msg3 + set result [list $msg1 $msg2 $msg3] + interp delete z + set result +} {{} {} {can not find channel named "stderr"}} +test io-1.8 {reuse of stdio special channels} {unixOnly} { + removeFile script + removeFile test1 + set f [open script w] + puts $f { + close stderr + set f [open test1 w] + puts stderr hello + close $f + set f [open test1 r] + puts [gets $f] + } + close $f + set f [open "|[list $tcltest script]" r] + set c [gets $f] + close $f + set c +} hello +test io-1.9 {reuse of stdio special channels} {stdio} { + removeFile script + removeFile test1 + set f [open script w] + puts $f { + set f [open test1 w] + puts $f hello + close $f + close stderr + set f [open "|[list [info nameofexecutable] cat test1]" r] + puts [gets $f] + } + close $f + set f [open "|[list $tcltest script]" r] + set c [gets $f] + close $f + set c +} hello + +# Must add test function for testing Tcl_CreateCloseHandler and +# Tcl_DeleteCloseHandler. + +# Test channel table management. The functions tested are +# GetChannelTable, DeleteChannelTable, Tcl_RegisterChannel, +# Tcl_UnregisterChannel, Tcl_GetChannel and Tcl_CreateChannel. +# +# These functions use "eof stdin" to ensure that the standard +# channels are added to the channel table of the interpreter. + +test io-2.1 {GetChannelTable, DeleteChannelTable on std handles} { + set l1 [testchannel refcount stdin] + eof stdin + interp create x + set l "" + lappend l [expr [testchannel refcount stdin] - $l1] + x eval {eof stdin} + lappend l [expr [testchannel refcount stdin] - $l1] + interp delete x + lappend l [expr [testchannel refcount stdin] - $l1] + set l +} {0 1 0} +test io-2.2 {GetChannelTable, DeleteChannelTable on std handles} { + set l1 [testchannel refcount stdout] + eof stdin + interp create x + set l "" + lappend l [expr [testchannel refcount stdout] - $l1] + x eval {eof stdout} + lappend l [expr [testchannel refcount stdout] - $l1] + interp delete x + lappend l [expr [testchannel refcount stdout] - $l1] + set l +} {0 1 0} +test io-2.3 {GetChannelTable, DeleteChannelTable on std handles} { + set l1 [testchannel refcount stderr] + eof stdin + interp create x + set l "" + lappend l [expr [testchannel refcount stderr] - $l1] + x eval {eof stderr} + lappend l [expr [testchannel refcount stderr] - $l1] + interp delete x + lappend l [expr [testchannel refcount stderr] - $l1] + set l +} {0 1 0} +test io-2.4 {Tcl_RegisterChannel, Tcl_UnregisterChannel} { + removeFile test1 + set l "" + set f [open test1 w] + lappend l [lindex [testchannel info $f] 15] + close $f + if {[catch {lindex [testchannel info $f] 15} msg]} { + lappend l $msg + } else { + lappend l "very broken: $f found after being closed" + } + string compare [string tolower $l] \ + [list 1 [format "can not find channel named \"%s\"" $f]] +} 0 +test io-2.5 {Tcl_RegisterChannel, Tcl_UnregisterChannel} { + removeFile test1 + set l "" + set f [open test1 w] + lappend l [lindex [testchannel info $f] 15] + interp create x + interp share "" $f x + lappend l [lindex [testchannel info $f] 15] + x eval close $f + lappend l [lindex [testchannel info $f] 15] + interp delete x + lappend l [lindex [testchannel info $f] 15] + close $f + if {[catch {lindex [testchannel info $f] 15} msg]} { + lappend l $msg + } else { + lappend l "very broken: $f found after being closed" + } + string compare [string tolower $l] \ + [list 1 2 1 1 [format "can not find channel named \"%s\"" $f]] +} 0 +test io-2.6 {Tcl_RegisterChannel, Tcl_UnregisterChannel} { + removeFile test1 + set l "" + set f [open test1 w] + lappend l [lindex [testchannel info $f] 15] + interp create x + interp share "" $f x + lappend l [lindex [testchannel info $f] 15] + interp delete x + lappend l [lindex [testchannel info $f] 15] + close $f + if {[catch {lindex [testchannel info $f] 15} msg]} { + lappend l $msg + } else { + lappend l "very broken: $f found after being closed" + } + string compare [string tolower $l] \ + [list 1 2 1 [format "can not find channel named \"%s\"" $f]] +} 0 +test io-2.7 {Tcl_GetChannel->Tcl_GetStdChannel, standard handles} { + eof stdin +} 0 +test io-2.8 {testing Tcl_GetChannel, user opened handle} { + removeFile test1 + set f [open test1 w] + set x [eof $f] + close $f + set x +} 0 +test io-2.9 {Tcl_GetChannel, channel not found} { + list [catch {eof file34} msg] $msg +} {1 {can not find channel named "file34"}} +test io-2.10 {Tcl_CreateChannel, insertion into channel table} { + removeFile test1 + set f [open test1 w] + set l "" + lappend l [eof $f] + close $f + if {[catch {lindex [testchannel info $f] 15} msg]} { + lappend l $msg + } else { + lappend l "very broken: $f found after being closed" + } + string compare [string tolower $l] \ + [list 0 [format "can not find channel named \"%s\"" $f]] +} 0 + +# Test management of attributes associated with a channel, such as +# its default translation, its name and type, etc. The functions +# tested in this group are Tcl_GetChannelName, +# Tcl_GetChannelType and Tcl_GetChannelFile. Tcl_GetChannelInstanceData +# not tested because files do not use the instance data. + +test io-3.1 {Tcl_GetChannelName} { + removeFile test1 + set f [open test1 w] + set n [testchannel name $f] + close $f + string compare $n $f +} 0 +test io-3.2 {Tcl_GetChannelType} { + removeFile test1 + set f [open test1 w] + set t [testchannel type $f] + close $f + string compare $t file +} 0 +test io-3.3 {Tcl_GetChannelFile, input} { + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + puts $f "1234567890\n098765432" + close $f + set f [open test1 r] + gets $f + set l "" + lappend l [testchannel inputbuffered $f] + lappend l [tell $f] + close $f + set l +} {10 11} +test io-3.4 {Tcl_GetChannelFile, output} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello + set l "" + lappend l [testchannel outputbuffered $f] + lappend l [tell $f] + flush $f + lappend l [testchannel outputbuffered $f] + lappend l [tell $f] + close $f + removeFile test1 + set l +} {6 6 0 6} + +# Test flushing. The functions tested here are FlushChannel. + +test io-4.1 {FlushChannel, no output buffered} { + removeFile test1 + set f [open test1 w] + flush $f + set s [file size test1] + close $f + set s +} 0 +test io-4.2 {FlushChannel, some output buffered} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + set l "" + puts $f hello + lappend l [file size test1] + flush $f + lappend l [file size test1] + close $f + lappend l [file size test1] + set l +} {0 6 6} +test io-4.3 {FlushChannel, implicit flush on close} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + set l "" + puts $f hello + lappend l [file size test1] + close $f + lappend l [file size test1] + set l +} {0 6} +test io-4.4 {FlushChannel, implicit flush when buffer fills} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + fconfigure $f -buffersize 60 + set l "" + lappend l [file size test1] + for {set i 0} {$i < 12} {incr i} { + puts $f hello + } + lappend l [file size test1] + flush $f + lappend l [file size test1] + close $f + set l +} {0 60 72} +test io-4.5 {FlushChannel, implicit flush when buffer fills and on close} {unixOrPc} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -buffersize 60 -eofchar {} + set l "" + lappend l [file size test1] + for {set i 0} {$i < 12} {incr i} { + puts $f hello + } + lappend l [file size test1] + close $f + lappend l [file size test1] + set l +} {0 60 72} +test io-4.6 {FlushChannel, async flushing, async close} {stdio && asyncPipeClose} { + removeFile pipe + removeFile output + set f [open pipe w] + puts $f { + set f [open output w] + fconfigure $f -translation lf -buffering none -eofchar {} + while {![eof stdin]} { + after 20 + puts -nonewline $f [read stdin 1024] + } + close $f + } + close $f + set x 01234567890123456789012345678901 + for {set i 0} {$i < 11} {incr i} { + set x "$x$x" + } + set f [open output w] + close $f + set f [open "|[list $tcltest pipe]" w] + fconfigure $f -blocking off + puts -nonewline $f $x + close $f + set counter 0 + while {([file size output] < 65536) && ($counter < 1000)} { + incr counter + after 20 + update + } + if {$counter == 1000} { + set result probably_broken + } else { + set result ok + } +} ok + +# Tests closing a channel. The functions tested are CloseChannel and Tcl_Close. + +test io-5.1 {CloseChannel called when all references are dropped} { + removeFile test1 + set f [open test1 w] + interp create x + interp share "" $f x + set l "" + lappend l [testchannel refcount $f] + x eval close $f + interp delete x + lappend l [testchannel refcount $f] + close $f + set l +} {2 1} +test io-5.2 {CloseChannel called when all references are dropped} { + removeFile test1 + set f [open test1 w] + interp create x + interp share "" $f x + puts -nonewline $f abc + close $f + x eval puts $f def + x eval close $f + interp delete x + set f [open test1 r] + set l [gets $f] + close $f + set l +} abcdef +test io-5.3 {CloseChannel, not called before output queue is empty} {unixOrPc asyncPipeClose nonPortable tempNotPc} { + removeFile pipe + removeFile output + set f [open pipe w] + puts $f { + + # Need to not have eof char appended on close, because the other + # side of the pipe already closed, so that writing would cause an + # error "invalid file". + + fconfigure stdout -eofchar {} + fconfigure stderr -eofchar {} + + set f [open output w] + fconfigure $f -translation lf -buffering none + for {set x 0} {$x < 20} {incr x} { + after 20 + puts -nonewline $f [read stdin 1024] + } + close $f + } + close $f + set x 01234567890123456789012345678901 + for {set i 0} {$i < 11} {incr i} { + set x "$x$x" + } + set f [open output w] + close $f + set f [open "|[list $tcltest pipe]" r+] + fconfigure $f -blocking off -eofchar {} + + # Under windows, the first 24576 bytes of $x are copied to $f, and + # then the writing fails. + + puts -nonewline $f $x + close $f + set counter 0 + while {([file size output] < 20480) && ($counter < 1000)} { + incr counter + after 20 + update + } + if {$counter == 1000} { + set result probably_broken + } else { + set result ok + } +} ok +test io-5.4 {Tcl_Close} { + removeFile test1 + set l "" + lappend l [lsort [testchannel open]] + set f [open test1 w] + lappend l [lsort [testchannel open]] + close $f + lappend l [lsort [testchannel open]] + set x [list $consoleFileNames \ + [lsort [eval list $consoleFileNames $f]] \ + $consoleFileNames] + string compare $l $x +} 0 +test io-5.5 {Tcl_Close vs standard handles} {unixOnly} { + removeFile script + set f [open script w] + puts $f { + close stdin + puts [testchannel open] + } + close $f + set f [open "|[list $tcltest script]" r] + set l [gets $f] + close $f + set l +} {file1 file2} + +# Test output on channels. The functions tested are Tcl_Write +# and Tcl_Flush. + +test io-6.1 {Tcl_Write, channel not writable} { + list [catch {puts stdin hello} msg] $msg +} {1 {channel "stdin" wasn't opened for writing}} +test io-6.2 {Tcl_Write, empty string} { + removeFile test1 + set f [open test1 w] + fconfigure $f -eofchar {} + puts -nonewline $f "" + close $f + file size test1 +} 0 +test io-6.3 {Tcl_Write, nonempty string} { + removeFile test1 + set f [open test1 w] + fconfigure $f -eofchar {} + puts -nonewline $f hello + close $f + file size test1 +} 5 +test io-6.4 {Tcl_Write, buffering in full buffering mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -buffering full -eofchar {} + puts $f hello + set l "" + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + flush $f + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + close $f + set l +} {6 0 0 6} +test io-6.5 {Tcl_Write, buffering in line buffering mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -buffering line -eofchar {} + puts -nonewline $f hello + set l "" + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + puts $f hello + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + close $f + set l +} {5 0 0 11} +test io-6.6 {Tcl_Write, buffering in no buffering mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -buffering none -eofchar {} + puts -nonewline $f hello + set l "" + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + puts $f hello + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + close $f + set l +} {0 5 0 11} +test io-6.7 {Tcl_Flush, full buffering} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -buffering full -eofchar {} + puts -nonewline $f hello + set l "" + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + puts $f hello + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + flush $f + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + close $f + set l +} {5 0 11 0 0 11} +test io-6.8 {Tcl_Flush, full buffering} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -buffering line + puts -nonewline $f hello + set l "" + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + flush $f + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + puts $f hello + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + flush $f + lappend l [testchannel outputbuffered $f] + lappend l [file size test1] + close $f + set l +} {5 0 0 5 0 11 0 11} +test io-6.9 {Tcl_Flush, channel not writable} { + list [catch {flush stdin} msg] $msg +} {1 {channel "stdin" wasn't opened for writing}} +test io-6.10 {Tcl_Write, looping and buffering} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + set f2 [open longfile r] + for {set x 0} {$x < 10} {incr x} { + puts $f1 [gets $f2] + } + close $f2 + close $f1 + file size test1 +} 387 +test io-6.11 {Tcl_Write, no newline, implicit flush} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -eofchar {} + set f2 [open longfile r] + for {set x 0} {$x < 10} {incr x} { + puts -nonewline $f1 [gets $f2] + } + close $f1 + close $f2 + file size test1 +} 377 +test io-6.12 {Tcl_Write on a pipe} {stdio} { + removeFile test1 + removeFile pipe + set f1 [open pipe w] + puts $f1 { + set f1 [open longfile r] + for {set x 0} {$x < 10} {incr x} { + puts [gets $f1] + } + } + close $f1 + set f1 [open "|[list $tcltest pipe]" r] + set f2 [open longfile r] + set y ok + for {set x 0} {$x < 10} {incr x} { + set l1 [gets $f1] + set l2 [gets $f2] + if {"$l1" != "$l2"} { + set y broken + } + } + close $f1 + close $f2 + set y +} ok +test io-6.13 {Tcl_Write to a pipe, line buffered} {stdio} { + removeFile test1 + removeFile pipe + set f1 [open pipe w] + puts $f1 { + puts [gets stdin] + puts [gets stdin] + } + close $f1 + set y ok + set f1 [open "|[list $tcltest pipe]" r+] + fconfigure $f1 -buffering line + set f2 [open longfile r] + set line [gets $f2] + puts $f1 $line + set backline [gets $f1] + if {"$line" != "$backline"} { + set y broken + } + set line [gets $f2] + puts $f1 $line + set backline [gets $f1] + if {"$line" != "$backline"} { + set y broken + } + close $f1 + close $f2 + set y +} ok +test io-6.14 {Tcl_Write, buffering and implicit flush at close} { + removeFile test3 + set f [open test3 w] + puts -nonewline $f "Text1" + puts -nonewline $f " Text 2" + puts $f " Text 3" + close $f + set f [open test3 r] + set x [gets $f] + close $f + set x +} {Text1 Text 2 Text 3} +test io-6.15 {Tcl_Flush, channel not open for writing} { + removeFile test1 + set fd [open test1 w] + close $fd + set fd [open test1 r] + set x [list [catch {flush $fd} msg] $msg] + close $fd + string compare $x \ + [list 1 "channel \"$fd\" wasn't opened for writing"] +} 0 +test io-6.16 {Tcl_Flush on pipe opened only for reading} {stdio} { + set fd [open "|[list $tcltest cat longfile]" r] + set x [list [catch {flush $fd} msg] $msg] + catch {close $fd} + string compare $x \ + [list 1 "channel \"$fd\" wasn't opened for writing"] +} 0 +test io-6.17 {Tcl_Write buffers, then Tcl_Flush flushes} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf + puts $f1 hello + puts $f1 hello + puts $f1 hello + flush $f1 + set x [file size test1] + close $f1 + set x +} 18 +test io-6.18 {Tcl_Write and Tcl_Flush intermixed} { + removeFile test1 + set x "" + set f1 [open test1 w] + fconfigure $f1 -translation lf + puts $f1 hello + puts $f1 hello + puts $f1 hello + flush $f1 + lappend x [file size test1] + puts $f1 hello + flush $f1 + lappend x [file size test1] + puts $f1 hello + flush $f1 + lappend x [file size test1] + close $f1 + set x +} {18 24 30} +test io-6.19 {Explicit and implicit flushes} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + set x "" + puts $f1 hello + puts $f1 hello + puts $f1 hello + flush $f1 + lappend x [file size test1] + puts $f1 hello + flush $f1 + lappend x [file size test1] + puts $f1 hello + close $f1 + lappend x [file size test1] + set x +} {18 24 30} +test io-6.20 {Implicit flush when buffer is full} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + set line "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789" + for {set x 0} {$x < 100} {incr x} { + puts $f1 $line + } + set z "" + lappend z [file size test1] + for {set x 0} {$x < 100} {incr x} { + puts $f1 $line + } + lappend z [file size test1] + close $f1 + lappend z [file size test1] + set z +} {4096 12288 12600} +test io-6.21 {Tcl_Flush to pipe} {stdio} { + removeFile pipe + set f1 [open pipe w] + puts $f1 {set x [read stdin 6]} + puts $f1 {set cnt [string length $x]} + puts $f1 {puts "read $cnt characters"} + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + puts $f1 hello + flush $f1 + set x [gets $f1] + catch {close $f1} + set x +} "read 6 characters" +test io-6.22 {Tcl_Flush called at other end of pipe} {stdio} { + removeFile pipe + set f1 [open pipe w] + puts $f1 { + fconfigure stdout -buffering full + puts hello + puts hello + flush stdout + gets stdin + puts bye + flush stdout + } + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + set x "" + lappend x [gets $f1] + lappend x [gets $f1] + puts $f1 hello + flush $f1 + lappend x [gets $f1] + close $f1 + set x +} {hello hello bye} +test io-6.23 {Tcl_Flush and line buffering at end of pipe} {stdio} { + removeFile pipe + set f1 [open pipe w] + puts $f1 { + puts hello + puts hello + gets stdin + puts bye + } + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + set x "" + lappend x [gets $f1] + lappend x [gets $f1] + puts $f1 hello + flush $f1 + lappend x [gets $f1] + close $f1 + set x +} {hello hello bye} +test io-6.24 {Tcl_Write and Tcl_Flush move end of file} { + set f [open test3 w] + puts $f "Line 1" + puts $f "Line 2" + set f2 [open test3] + set x {} + lappend x [read -nonewline $f2] + close $f2 + flush $f + set f2 [open test3] + lappend x [read -nonewline $f2] + close $f2 + close $f + set x +} {{} {Line 1 +Line 2}} +test io-6.25 {Implicit flush with Tcl_Flush to command pipelines} {stdio} { + removeFile test3 + set f [open "|[list $tcltest cat | $tcltest cat > test3]" w] + puts $f "Line 1" + puts $f "Line 2" + close $f + after 100 + set f [open test3 r] + set x [read $f] + close $f + set x +} {Line 1 +Line 2 +} +test io-6.26 {Tcl_Flush, Tcl_Write on bidirectional pipelines} {unixOrPc && unixExecs && tempNotPc} { + set f [open "|[list cat -u]" r+] + puts $f "Line1" + flush $f + set x [gets $f] + close $f + set x +} {Line1} +test io-6.27 {Tcl_Flush on closed pipeline} {stdio && tempNotPc} { + removeFile pipe + set f [open pipe w] + puts $f {exit} + close $f + set f [open "|[list $tcltest pipe]" r+] + gets $f + puts $f output + after 50 + # + # The flush below will get a SIGPIPE. This is an expected part of + # test and indicates that the test operates correctly. If you run + # this test under a debugger, the signal will by intercepted unless + # you disable the debugger's signal interception. + # + if {[catch {flush $f} msg]} { + set x [list 1 $msg $errorCode] + catch {close $f} + } else { + if {[catch {close $f} msg]} { + set x [list 1 $msg $errorCode] + } else { + set x {this was supposed to fail and did not} + } + } + regsub {".*":} $x {"":} x + string tolower $x +} {1 {error flushing "": broken pipe} {posix epipe {broken pipe}}} +test io-6.28 {Tcl_Write, lf mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + puts $f hello\nthere\nand\nhere + flush $f + set s [file size test1] + close $f + set s +} 21 +test io-6.29 {Tcl_Write, cr mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr -eofchar {} + puts $f hello\nthere\nand\nhere + close $f + file size test1 +} 21 +test io-6.30 {Tcl_Write, crlf mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf -eofchar {} + puts $f hello\nthere\nand\nhere + close $f + file size test1 +} 25 +test io-6.31 {Tcl_Write, background flush} {stdio} { + removeFile pipe + removeFile output + set f [open pipe w] + puts $f {set f [open output w]} + puts $f {fconfigure $f -translation lf} + set x [list while {![eof stdin]}] + set x "$x {" + puts $f $x + puts $f { puts -nonewline $f [read stdin 4096]} + puts $f { flush $f} + puts $f "}" + puts $f {close $f} + close $f + set x 01234567890123456789012345678901 + for {set i 0} {$i < 11} {incr i} { + set x "$x$x" + } + set f [open output w] + close $f + set f [open "|[list $tcltest pipe]" r+] + fconfigure $f -blocking off + puts -nonewline $f $x + close $f + set counter 0 + while {([file size output] < 65536) && ($counter < 1000)} { + incr counter + after 5 + update + } + if {$counter == 1000} { + set result probably_broken + } else { + set result ok + } +} ok +test io-6.32 {Tcl_Write, background flush to slow reader} {stdio && asyncPipeClose} { + removeFile pipe + removeFile output + set f [open pipe w] + puts $f {set f [open output w]} + puts $f {fconfigure $f -translation lf} + set x [list while {![eof stdin]}] + set x "$x {" + puts $f $x + puts $f { after 20} + puts $f { puts -nonewline $f [read stdin 1024]} + puts $f { flush $f} + puts $f "}" + puts $f {close $f} + close $f + set x 01234567890123456789012345678901 + for {set i 0} {$i < 11} {incr i} { + set x "$x$x" + } + set f [open output w] + close $f + set f [open "|[list $tcltest pipe]" r+] + fconfigure $f -blocking off + puts -nonewline $f $x + close $f + set counter 0 + while {([file size output] < 65536) && ($counter < 1000)} { + incr counter + after 20 + update + } + if {$counter == 1000} { + set result probably_broken + } else { + set result ok + } +} ok +test io-6.33 {Tcl_Flush, implicit flush on exit} {stdio} { + set f [open script w] + puts $f { + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello + puts $f bye + puts $f strange + } + close $f + exec $tcltest script + set f [open test1 r] + set r [read $f] + close $f + set r +} {hello +bye +strange +} + +test io-6.34 {Tcl_Close, async flush on close, using sockets} {socket tempNotMac} { + set c 0 + set x running + set l abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz + proc writelots {s l} { + for {set i 0} {$i < 2000} {incr i} { + puts $s $l + } + } + proc accept {s a p} { + global x + fileevent $s readable [list readit $s] + fconfigure $s -blocking off + set x accepted + } + proc readit {s} { + global c x + set l [gets $s] + + if {[eof $s]} { + close $s + set x done + } elseif {([string length $l] > 0) || ![fblocked $s]} { + incr c + } + } + set ss [socket -server accept 2828] + set cs [socket [info hostname] 2828] + vwait x + fconfigure $cs -blocking off + writelots $cs $l + close $cs + close $ss + vwait x + set c +} 2000 +test io-6.35 {Tcl_Close vs fileevent vs multiple interpreters} {socket} { + catch {interp delete x} + catch {interp delete y} + interp create x + interp create y + set s [socket -server accept 2828] + proc accept {s a p} { + puts $s hello + close $s + } + set c [socket [info hostname] 2828] + interp share {} $c x + interp share {} $c y + close $c + x eval { + proc readit {s} { + gets $s + if {[eof $s]} { + close $s + } + } + } + y eval { + proc readit {s} { + gets $s + if {[eof $s]} { + close $s + } + } + } + x eval "fileevent $c readable \{readit $c\}" + y eval "fileevent $c readable \{readit $c\}" + y eval [list close $c] + update + close $s + interp delete x + interp delete y +} "" + +# Test end of line translations. Procedures tested are Tcl_Write, Tcl_Read. + +test io-7.1 {Tcl_Write lf, Tcl_Read lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation lf + set x [read $f] + close $f + set x +} "hello\nthere\nand\nhere\n" +test io-7.2 {Tcl_Write lf, Tcl_Read cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation cr + set x [read $f] + close $f + set x +} "hello\nthere\nand\nhere\n" +test io-7.3 {Tcl_Write lf, Tcl_Read crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation crlf + set x [read $f] + close $f + set x +} "hello\nthere\nand\nhere\n" +test io-7.4 {Tcl_Write cr, Tcl_Read cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation cr + set x [read $f] + close $f + set x +} "hello\nthere\nand\nhere\n" +test io-7.5 {Tcl_Write cr, Tcl_Read lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation lf + set x [read $f] + close $f + set x +} "hello\rthere\rand\rhere\r" +test io-7.6 {Tcl_Write cr, Tcl_Read crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation crlf + set x [read $f] + close $f + set x +} "hello\rthere\rand\rhere\r" +test io-7.7 {Tcl_Write crlf, Tcl_Read crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation crlf + set x [read $f] + close $f + set x +} "hello\nthere\nand\nhere\n" +test io-7.8 {Tcl_Write crlf, Tcl_Read lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation lf + set x [read $f] + close $f + set x +} "hello\r\nthere\r\nand\r\nhere\r\n" +test io-7.9 {Tcl_Write crlf, Tcl_Read cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation cr + set x [read $f] + close $f + set x +} "hello\n\nthere\n\nand\n\nhere\n\n" +test io-7.10 {Tcl_Write lf, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + set c [read $f] + set x [fconfigure $f -translation] + close $f + list $c $x +} {{hello +there +and +here +} auto} +test io-7.11 {Tcl_Write cr, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + set c [read $f] + set x [fconfigure $f -translation] + close $f + list $c $x +} {{hello +there +and +here +} auto} +test io-7.12 {Tcl_Write crlf, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + set c [read $f] + set x [fconfigure $f -translation] + close $f + list $c $x +} {{hello +there +and +here +} auto} + +test io-7.13 {Tcl_Write crlf on block boundary, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set line "123456789ABCDE" ;# 14 char plus crlf + puts -nonewline $f x ;# shift crlf across block boundary + for {set i 0} {$i < 700} {incr i} { + puts $f $line + } + close $f + set f [open test1 r] + fconfigure $f -translation auto + set c [read $f] + close $f + string length $c +} [expr 700*15+1] + +test io-7.14 {Tcl_Write crlf on block boundary, Tcl_Read crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set line "123456789ABCDE" ;# 14 char plus crlf + puts -nonewline $f x ;# shift crlf across block boundary + for {set i 0} {$i < 700} {incr i} { + puts $f $line + } + close $f + set f [open test1 r] + fconfigure $f -translation crlf + set c [read $f] + close $f + string length $c +} [expr 700*15+1] + +test io-7.15 {Tcl_Write mixed, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\rhere + close $f + set f [open test1 r] + fconfigure $f -translation auto + set c [read $f] + close $f + set c +} {hello +there +and +here +} +test io-7.16 {Tcl_Write ^Z at end, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f hello\nthere\nand\rhere\n\x1a + close $f + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + set c [read $f] + close $f + set c +} {hello +there +and +here +} +test io-7.17 {Tcl_Write, implicit ^Z at end, Tcl_Read auto} {pcOnly} { + removeFile test1 + set f [open test1 w] + fconfigure $f -eofchar \x1a -translation lf + puts $f hello\nthere\nand\rhere + close $f + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + set c [read $f] + close $f + set c +} {hello +there +and +here +} +test io-7.18 {Tcl_Write, ^Z in middle, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set s [format "abc\ndef\n%cghi\nqrs" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1 {} 1} +test io-7.19 {Tcl_Write, ^Z no newline in middle, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set s [format "abc\ndef\n%cghi\nqrs" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1 {} 1} +test io-7.20 {Tcl_Write, ^Z in middle ignored, Tcl_Read lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + set s [format "abc\ndef\n%cghi\nqrs" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation lf -eofchar {} + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} "abc def 0 \x1aghi 0 qrs 0 {} 1" +test io-7.21 {Tcl_Write, ^Z in middle ignored, Tcl_Read cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + set s [format "abc\ndef\n%cghi\nqrs" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation cr -eofchar {} + set l "" + set x [gets $f] + lappend l [string compare $x "abc\ndef\n\x1aghi\nqrs"] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {0 1 {} 1} +test io-7.22 {Tcl_Write, ^Z in middle ignored, Tcl_Read crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + set s [format "abc\ndef\n%cghi\nqrs" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation crlf -eofchar {} + set l "" + set x [gets $f] + lappend l [string compare $x "abc\ndef\n\x1aghi\nqrs"] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {0 1 {} 1} +test io-7.23 {Tcl_Write lf, ^Z in middle, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set c [format abc\ndef\n%cqrs\ntuv 26] + puts $f $c + close $f + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set c [string length [read $f]] + set e [eof $f] + close $f + list $c $e +} {8 1} +test io-7.24 {Tcl_Write lf, ^Z in middle, Tcl_Read lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set c [format abc\ndef\n%cqrs\ntuv 26] + puts $f $c + close $f + set f [open test1 r] + fconfigure $f -translation lf -eofchar \x1a + set c [string length [read $f]] + set e [eof $f] + close $f + list $c $e +} {8 1} +test io-7.25 {Tcl_Write cr, ^Z in middle, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + set c [format abc\ndef\n%cqrs\ntuv 26] + puts $f $c + close $f + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set c [string length [read $f]] + set e [eof $f] + close $f + list $c $e +} {8 1} +test io-7.26 {Tcl_Write cr, ^Z in middle, Tcl_Read cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + set c [format abc\ndef\n%cqrs\ntuv 26] + puts $f $c + close $f + set f [open test1 r] + fconfigure $f -translation cr -eofchar \x1a + set c [string length [read $f]] + set e [eof $f] + close $f + list $c $e +} {8 1} +test io-7.27 {Tcl_Write crlf, ^Z in middle, Tcl_Read auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set c [format abc\ndef\n%cqrs\ntuv 26] + puts $f $c + close $f + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set c [string length [read $f]] + set e [eof $f] + close $f + list $c $e +} {8 1} +test io-7.28 {Tcl_Write crlf, ^Z in middle, Tcl_Read crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set c [format abc\ndef\n%cqrs\ntuv 26] + puts $f $c + close $f + set f [open test1 r] + fconfigure $f -translation crlf -eofchar \x1a + set c [string length [read $f]] + set e [eof $f] + close $f + list $c $e +} {8 1} + +# Test end of line translations. Functions tested are Tcl_Write and Tcl_Gets. + +test io-8.1 {Tcl_Write lf, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + set l "" + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + close $f + set l +} {hello 6 auto there 12 auto} +test io-8.2 {Tcl_Write cr, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + set l "" + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + close $f + set l +} {hello 6 auto there 12 auto} +test io-8.3 {Tcl_Write crlf, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + set l "" + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + close $f + set l +} {hello 7 auto there 14 auto} +test io-8.4 {Tcl_Write lf, Tcl_Gets lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation lf + set l "" + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + close $f + set l +} {hello 6 lf there 12 lf} +test io-8.5 {Tcl_Write lf, Tcl_Gets cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation cr + set l "" + lappend l [string length [gets $f]] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + close $f + set l +} {20 21 cr 1 {} 21 cr 1} +test io-8.6 {Tcl_Write lf, Tcl_Gets crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation crlf + set l "" + lappend l [string length [gets $f]] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + close $f + set l +} {20 21 crlf 1 {} 21 crlf 1} +test io-8.7 {Tcl_Write cr, Tcl_Gets cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation cr + set l "" + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + close $f + set l +} {hello 6 cr 0 there 12 cr 0} +test io-8.8 {Tcl_Write cr, Tcl_Gets lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation lf + set l "" + lappend l [string length [gets $f]] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + close $f + set l +} {21 21 lf 1 {} 21 lf 1} +test io-8.9 {Tcl_Write cr, Tcl_Gets crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation crlf + set l "" + lappend l [string length [gets $f]] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + close $f + set l +} {21 21 crlf 1 {} 21 crlf 1} +test io-8.10 {Tcl_Write crlf, Tcl_Gets crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation crlf + set l "" + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + close $f + set l +} {hello 7 crlf 0 there 14 crlf 0} +test io-8.11 {Tcl_Write crlf, Tcl_Gets cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation cr + set l "" + lappend l [gets $f] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + lappend l [string length [gets $f]] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + close $f + set l +} {hello 6 cr 0 6 13 cr 0} +test io-8.12 {Tcl_Write crlf, Tcl_Gets lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + puts $f hello\nthere\nand\nhere + close $f + set f [open test1 r] + fconfigure $f -translation lf + set l "" + lappend l [string length [gets $f]] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + lappend l [string length [gets $f]] + lappend l [tell $f] + lappend l [fconfigure $f -translation] + lappend l [eof $f] + close $f + set l +} {6 7 lf 0 6 14 lf 0} +test io-8.13 {binary mode is synonym of lf mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation binary + set x [fconfigure $f -translation] + close $f + set x +} lf +# +# Test io-9.14 has been removed because "auto" output translation mode is +# not supoprted. +# +test io-8.14 {Tcl_Write mixed, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts $f hello\nthere\rand\r\nhere + close $f + set f [open test1 r] + fconfigure $f -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {hello there and here 0 {} 1} +test io-8.15 {Tcl_Write mixed, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f hello\nthere\rand\r\nhere\r + close $f + set f [open test1 r] + fconfigure $f -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {hello there and here 0 {} 1} +test io-8.16 {Tcl_Write mixed, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f hello\nthere\rand\r\nhere\n + close $f + set f [open test1 r] + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {hello there and here 0 {} 1} +test io-8.17 {Tcl_Write mixed, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f hello\nthere\rand\r\nhere\r\n + close $f + set f [open test1 r] + fconfigure $f -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {hello there and here 0 {} 1} +test io-8.18 {Tcl_Write ^Z at end, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set s [format "hello\nthere\nand\rhere\n\%c" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {hello there and here 0 {} 1} +test io-8.19 {Tcl_Write, implicit ^Z at end, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -eofchar \x1a -translation lf + puts $f hello\nthere\nand\rhere + close $f + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {hello there and here 0 {} 1} +test io-8.20 {Tcl_Write, ^Z in middle, Tcl_Gets auto, eofChar} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -eofchar \x1a + fconfigure $f -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1} +test io-8.21 {Tcl_Write, no newline ^Z in middle, Tcl_Gets auto, eofChar} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1} +test io-8.22 {Tcl_Write, ^Z in middle ignored, Tcl_Gets lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation lf -eofchar {} + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} "abc def 0 \x1aqrs 0 tuv 0 {} 1" +test io-8.23 {Tcl_Write, ^Z in middle ignored, Tcl_Gets cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr -eofchar {} + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation cr -eofchar {} + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} "abc def 0 \x1aqrs 0 tuv 0 {} 1" +test io-8.24 {Tcl_Write, ^Z in middle ignored, Tcl_Gets crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf -eofchar {} + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation crlf -eofchar {} + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} "abc def 0 \x1aqrs 0 tuv 0 {} 1" +test io-8.25 {Tcl_Write lf, ^Z in middle, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1} +test io-8.26 {Tcl_Write lf, ^Z in middle, Tcl_Gets lf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation lf -eofchar \x1a + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1} +test io-8.27 {Tcl_Write cr, ^Z in middle, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr -eofchar {} + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1} +test io-8.28 {Tcl_Write cr, ^Z in middle, Tcl_Gets cr} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr -eofchar {} + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation cr -eofchar \x1a + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1} +test io-8.29 {Tcl_Write crlf, ^Z in middle, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf -eofchar {} + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1} +test io-8.30 {Tcl_Write crlf, ^Z in middle, Tcl_Gets crlf} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf -eofchar {} + set s [format "abc\ndef\n%cqrs\ntuv" 26] + puts $f $s + close $f + set f [open test1 r] + fconfigure $f -translation crlf -eofchar \x1a + set l "" + lappend l [gets $f] + lappend l [gets $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {abc def 0 {} 1} +test io-8.31 {Tcl_Write crlf on block boundary, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set line "123456789ABCDE" ;# 14 char plus crlf + puts -nonewline $f x ;# shift crlf across block boundary + for {set i 0} {$i < 700} {incr i} { + puts $f $line + } + close $f + set f [open test1 r] + fconfigure $f -translation auto + set c "" + while {[gets $f line] >= 0} { + append c $line\n + } + close $f + string length $c +} [expr 700*15+1] +test io-8.32 {Tcl_Write crlf on block boundary, Tcl_Gets auto} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set line "123456789ABCDE" ;# 14 char plus crlf + puts -nonewline $f x ;# shift crlf across block boundary + for {set i 0} {$i < 256} {incr i} { + puts $f $line + } + close $f + set f [open test1 r] + fconfigure $f -translation auto + set c "" + while {[gets $f line] >= 0} { + append c $line\n + } + close $f + string length $c +} [expr 256*15+1] + + +# Test Tcl_Read and buffering. + +test io-9.1 {Tcl_Read, channel not readable} { + list [catch {read stdout} msg] $msg +} {1 {channel "stdout" wasn't opened for reading}} +test io-9.2 {Tcl_Read, zero byte count} { + read stdin 0 +} "" +test io-9.3 {Tcl_Read, negative byte count} { + set f [open longfile r] + set l [list [catch {read $f -1} msg] $msg] + close $f + set l +} {1 {bad argument "-1": should be "nonewline"}} +test io-9.4 {Tcl_Read, positive byte count} { + set f [open longfile r] + set x [read $f 1024] + set s [string length $x] + unset x + close $f + set s +} 1024 +test io-9.5 {Tcl_Read, multiple buffers} { + set f [open longfile r] + fconfigure $f -buffersize 100 + set x [read $f 1024] + set s [string length $x] + unset x + close $f + set s +} 1024 +test io-9.6 {Tcl_Read, very large read} { + set f1 [open longfile r] + set z [read $f1 1000000] + close $f1 + set l [string length $z] + set x ok + set z [file size longfile] + if {$z != $l} { + set x broken + } + set x +} ok +test io-9.7 {Tcl_Read, nonblocking, file} {nonBlockFiles} { + set f1 [open longfile r] + fconfigure $f1 -blocking off + set z [read $f1 20] + close $f1 + set l [string length $z] + set x ok + if {$l != 20} { + set x broken + } + set x +} ok +test io-9.8 {Tcl_Read, nonblocking, file} {nonBlockFiles} { + set f1 [open longfile r] + fconfigure $f1 -blocking off + set z [read $f1 1000000] + close $f1 + set x ok + set l [string length $z]] + set z [file size longfile]] + if {$z != $l} { + set x broken + } + set x +} ok +test io-9.9 {Tcl_Read, read to end of file} { + set f1 [open longfile r] + set z [read $f1] + close $f1 + set l [string length $z] + set x ok + set z [file size longfile] + if {$z != $l} { + set x broken + } + set x +} ok +test io-9.10 {Tcl_Read from a pipe} {stdio} { + removeFile pipe + set f1 [open pipe w] + puts $f1 {puts [gets stdin]} + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + puts $f1 hello + flush $f1 + set x [read $f1] + close $f1 + set x +} "hello\n" +test io-9.11 {Tcl_Read from a pipe} {stdio} { + removeFile pipe + set f1 [open pipe w] + puts $f1 {puts [gets stdin]} + puts $f1 {puts [gets stdin]} + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + puts $f1 hello + flush $f1 + set x "" + lappend x [read $f1 6] + puts $f1 hello + flush $f1 + lappend x [read $f1] + close $f1 + set x +} {{hello +} {hello +}} +test io-9.12 {Tcl_Read, -nonewline} { + removeFile test1 + set f1 [open test1 w] + puts $f1 hello + puts $f1 bye + close $f1 + set f1 [open test1 r] + set c [read -nonewline $f1] + close $f1 + set c +} {hello +bye} +test io-9.13 {Tcl_Read, -nonewline} { + removeFile test1 + set f1 [open test1 w] + puts $f1 hello + puts $f1 bye + close $f1 + set f1 [open test1 r] + set c [read -nonewline $f1] + close $f1 + list [string length $c] $c +} {9 {hello +bye}} +test io-9.14 {Tcl_Read, reading in small chunks} { + removeFile test1 + set f [open test1 w] + puts $f "Two lines: this one" + puts $f "and this one" + close $f + set f [open test1] + set x [list [read $f 1] [read $f 2] [read $f]] + close $f + set x +} {T wo { lines: this one +and this one +}} +test io-9.15 {Tcl_Read, asking for more input than available} { + removeFile test1 + set f [open test1 w] + puts $f "Two lines: this one" + puts $f "and this one" + close $f + set f [open test1] + set x [read $f 100] + close $f + set x +} {Two lines: this one +and this one +} +test io-9.16 {Tcl_Read, read to end of file with -nonewline} { + removeFile test1 + set f [open test1 w] + puts $f "Two lines: this one" + puts $f "and this one" + close $f + set f [open test1] + set x [read -nonewline $f] + close $f + set x +} {Two lines: this one +and this one} + +# Test Tcl_Gets. + +test io-10.1 {Tcl_Gets, reading what was written} { + removeFile test1 + set f1 [open test1 w] + set y "first line" + puts $f1 $y + close $f1 + set f1 [open test1 r] + set x [gets $f1] + set z ok + if {"$x" != "$y"} { + set z broken + } + close $f1 + set z +} ok +test io-10.2 {Tcl_Gets into variable} { + set f1 [open longfile r] + set c [gets $f1 x] + set l [string length x] + set z ok + if {$l != $l} { + set z broken + } + close $f1 + set z +} ok +test io-10.3 {Tcl_Gets from pipe} {stdio} { + removeFile pipe + set f1 [open pipe w] + puts $f1 {puts [gets stdin]} + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + puts $f1 hello + flush $f1 + set x [gets $f1] + close $f1 + set z ok + if {"$x" != "hello"} { + set z broken + } + set z +} ok +test io-10.4 {Tcl_Gets with long line} { + removeFile test3 + set f [open test3 w] + puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" + puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" + puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" + puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" + puts $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" + close $f + set f [open test3] + set x [gets $f] + close $f + set x +} {abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ} +test io-10.5 {Tcl_Gets with long line} { + set f [open test3] + set x [gets $f y] + close $f + list $x $y +} {260 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ} +test io-10.6 {Tcl_Gets and end of file} { + removeFile test3 + set f [open test3 w] + puts -nonewline $f "Test1\nTest2" + close $f + set f [open test3] + set x {} + set y {} + lappend x [gets $f y] $y + set y {} + lappend x [gets $f y] $y + set y {} + lappend x [gets $f y] $y + close $f + set x +} {5 Test1 5 Test2 -1 {}} +test io-10.7 {Tcl_Gets and bad variable} { + set f [open test3 w] + puts $f "Line 1" + puts $f "Line 2" + close $f + catch {unset x} + set x 24 + set f [open test3 r] + set result [list [catch {gets $f x(0)} msg] $msg] + close $f + set result +} {1 {can't set "x(0)": variable isn't array}} +test io-10.8 {Tcl_Gets, exercising double buffering} { + set f [open test3 w] + fconfigure $f -translation lf -eofchar {} + set x "" + for {set y 0} {$y < 99} {incr y} {set x "a$x"} + for {set y 0} {$y < 100} {incr y} {puts $f $x} + close $f + set f [open test3 r] + fconfigure $f -translation lf + for {set y 0} {$y < 100} {incr y} {gets $f} + close $f + set y +} 100 +test io-10.9 {Tcl_Gets, exercising double buffering} { + set f [open test3 w] + fconfigure $f -translation lf -eofchar {} + set x "" + for {set y 0} {$y < 99} {incr y} {set x "a$x"} + for {set y 0} {$y < 200} {incr y} {puts $f $x} + close $f + set f [open test3 r] + fconfigure $f -translation lf + for {set y 0} {$y < 200} {incr y} {gets $f} + close $f + set y +} 200 +test io-10.10 {Tcl_Gets, exercising double buffering} { + set f [open test3 w] + fconfigure $f -translation lf -eofchar {} + set x "" + for {set y 0} {$y < 99} {incr y} {set x "a$x"} + for {set y 0} {$y < 300} {incr y} {puts $f $x} + close $f + set f [open test3 r] + fconfigure $f -translation lf + for {set y 0} {$y < 300} {incr y} {gets $f} + close $f + set y +} 300 + +# Test Tcl_Seek and Tcl_Tell. + +test io-11.1 {Tcl_Seek to current position at start of file} { + set f1 [open longfile r] + seek $f1 0 current + set c [tell $f1] + close $f1 + set c +} 0 +test io-11.2 {Tcl_Seek to offset from start} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + puts $f1 "abcdefghijklmnopqrstuvwxyz" + puts $f1 "abcdefghijklmnopqrstuvwxyz" + close $f1 + set f1 [open test1 r] + seek $f1 10 start + set c [tell $f1] + close $f1 + set c +} 10 +test io-11.3 {Tcl_Seek to end of file} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + puts $f1 "abcdefghijklmnopqrstuvwxyz" + puts $f1 "abcdefghijklmnopqrstuvwxyz" + close $f1 + set f1 [open test1 r] + seek $f1 0 end + set c [tell $f1] + close $f1 + set c +} 54 +test io-11.4 {Tcl_Seek to offset from end of file} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + puts $f1 "abcdefghijklmnopqrstuvwxyz" + puts $f1 "abcdefghijklmnopqrstuvwxyz" + close $f1 + set f1 [open test1 r] + seek $f1 -10 end + set c [tell $f1] + close $f1 + set c +} 44 +test io-11.5 {Tcl_Seek to offset from current position} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + puts $f1 "abcdefghijklmnopqrstuvwxyz" + puts $f1 "abcdefghijklmnopqrstuvwxyz" + close $f1 + set f1 [open test1 r] + seek $f1 10 current + seek $f1 10 current + set c [tell $f1] + close $f1 + set c +} 20 +test io-11.6 {Tcl_Seek to offset from end of file} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + puts $f1 "abcdefghijklmnopqrstuvwxyz" + puts $f1 "abcdefghijklmnopqrstuvwxyz" + close $f1 + set f1 [open test1 r] + seek $f1 -10 end + set c [tell $f1] + set r [read $f1] + close $f1 + list $c $r +} {44 {rstuvwxyz +}} +test io-11.7 {Tcl_Seek to offset from end of file, then to current position} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + puts $f1 "abcdefghijklmnopqrstuvwxyz" + puts $f1 "abcdefghijklmnopqrstuvwxyz" + close $f1 + set f1 [open test1 r] + seek $f1 -10 end + set c1 [tell $f1] + set r1 [read $f1 5] + seek $f1 0 current + set c2 [tell $f1] + close $f1 + list $c1 $r1 $c2 +} {44 rstuv 49} +test io-11.8 {Tcl_Seek on pipes: not supported} {stdio} { + set f1 [open "|[list $tcltest]" r+] + set x [list [catch {seek $f1 0 current} msg] $msg] + close $f1 + regsub {".*":} $x {"":} x + string tolower $x +} {1 {error during seek on "": invalid argument}} +test io-11.9 {Tcl_Seek, testing buffered input flushing} { + removeFile test3 + set f [open test3 w] + fconfigure $f -eofchar {} + puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" + close $f + set f [open test3 RDWR] + set x [read $f 1] + seek $f 3 + lappend x [read $f 1] + seek $f 0 start + lappend x [read $f 1] + seek $f 10 current + lappend x [read $f 1] + seek $f -2 end + lappend x [read $f 1] + seek $f 50 end + lappend x [read $f 1] + seek $f 1 + lappend x [read $f 1] + close $f + set x +} {a d a l Y {} b} +test io-11.10 {Tcl_Seek testing flushing of buffered input} { + set f [open test3 w] + fconfigure $f -translation lf + puts $f xyz\n123 + close $f + set f [open test3 r+] + fconfigure $f -translation lf + set x [gets $f] + seek $f 0 current + puts $f 456 + close $f + list $x [viewFile test3] +} "xyz {xyz +456}" +test io-11.11 {Tcl_Seek testing flushing of buffered output} { + set f [open test3 w] + puts $f xyz\n123 + close $f + set f [open test3 w+] + puts $f xyzzy + seek $f 2 + set x [gets $f] + close $f + list $x [viewFile test3] +} "zzy xyzzy" +test io-11.12 {Tcl_Seek testing combination of write, seek back and read} { + set f [open test3 w] + fconfigure $f -translation lf -eofchar {} + puts $f xyz\n123 + close $f + set f [open test3 a+] + fconfigure $f -translation lf -eofchar {} + puts $f xyzzy + flush $f + set x [tell $f] + seek $f -4 cur + set y [gets $f] + close $f + list $x [viewFile test3] $y +} {14 {xyz +123 +xyzzy} zzy} +test io-11.13 {Tcl_Tell at start of file} { + removeFile test1 + set f1 [open test1 w] + set p [tell $f1] + close $f1 + set p +} 0 +test io-11.14 {Tcl_Tell after seek to end of file} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + puts $f1 "abcdefghijklmnopqrstuvwxyz" + puts $f1 "abcdefghijklmnopqrstuvwxyz" + close $f1 + set f1 [open test1 r] + seek $f1 0 end + set c1 [tell $f1] + close $f1 + set c1 +} 54 +test io-11.15 {Tcl_Tell combined with seeking} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + puts $f1 "abcdefghijklmnopqrstuvwxyz" + puts $f1 "abcdefghijklmnopqrstuvwxyz" + close $f1 + set f1 [open test1 r] + seek $f1 10 start + set c1 [tell $f1] + seek $f1 10 current + set c2 [tell $f1] + close $f1 + list $c1 $c2 +} {10 20} +test io-11.16 {Tcl_tell on pipe: always -1} {stdio} { + set f1 [open "|[list $tcltest]" r+] + set c [tell $f1] + close $f1 + set c +} -1 +test io-11.17 {Tcl_Tell on pipe: always -1} {stdio} { + set f1 [open "|[list $tcltest]" r+] + puts $f1 {puts hello} + flush $f1 + set c [tell $f1] + gets $f1 + close $f1 + set c +} -1 +test io-11.18 {Tcl_Tell combined with seeking and reading} { + removeFile test2 + set f [open test2 w] + fconfigure $f -translation lf -eofchar {} + puts -nonewline $f "line1\nline2\nline3\nline4\nline5\n" + close $f + set f [open test2] + fconfigure $f -translation lf + set x [tell $f] + read $f 3 + lappend x [tell $f] + seek $f 2 + lappend x [tell $f] + seek $f 10 current + lappend x [tell $f] + seek $f 0 end + lappend x [tell $f] + close $f + set x +} {0 3 2 12 30} +test io-11.19 {Tcl_Tell combined with opening in append mode} { + set f [open test3 w] + fconfigure $f -translation lf -eofchar {} + puts $f "abcdefghijklmnopqrstuvwxyz" + puts $f "abcdefghijklmnopqrstuvwxyz" + close $f + set f [open test3 a] + set c [tell $f] + close $f + set c +} 54 +test io-11.20 {Tcl_Tell combined with writing} { + set f [open test3 w] + set l "" + seek $f 29 start + lappend l [tell $f] + puts -nonewline $f a + seek $f 39 start + lappend l [tell $f] + puts -nonewline $f a + lappend l [tell $f] + seek $f 407 end + lappend l [tell $f] + close $f + set l +} {29 39 40 447} + +# Test Tcl_Eof + +test io-12.1 {Tcl_Eof} { + removeFile test1 + set f [open test1 w] + puts $f hello + puts $f hello + close $f + set f [open test1] + set x [eof $f] + lappend x [eof $f] + gets $f + lappend x [eof $f] + gets $f + lappend x [eof $f] + gets $f + lappend x [eof $f] + lappend x [eof $f] + close $f + set x +} {0 0 0 0 1 1} +test io-12.2 {Tcl_Eof with pipe} {stdio} { + removeFile pipe + set f1 [open pipe w] + puts $f1 {gets stdin} + puts $f1 {puts hello} + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + puts $f1 hello + set x [eof $f1] + flush $f1 + lappend x [eof $f1] + gets $f1 + lappend x [eof $f1] + gets $f1 + lappend x [eof $f1] + close $f1 + set x +} {0 0 0 1} +test io-12.3 {Tcl_Eof with pipe} {stdio} { + removeFile pipe + set f1 [open pipe w] + puts $f1 {gets stdin} + puts $f1 {puts hello} + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + puts $f1 hello + set x [eof $f1] + flush $f1 + lappend x [eof $f1] + gets $f1 + lappend x [eof $f1] + gets $f1 + lappend x [eof $f1] + gets $f1 + lappend x [eof $f1] + gets $f1 + lappend x [eof $f1] + close $f1 + set x +} {0 0 0 1 1 1} +test io-12.4 {Tcl_Eof, eof detection on nonblocking file} {nonBlockFiles} { + removeFile test1 + set f [open test1 w] + close $f + set f [open test1 r] + fconfigure $f -blocking off + set l "" + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {{} 1} +test io-12.5 {Tcl_Eof, eof detection on nonblocking pipe} {stdio} { + removeFile pipe + set f [open pipe w] + puts $f { + exit + } + close $f + set f [open "|[list $tcltest pipe]" r] + set l "" + lappend l [gets $f] + lappend l [eof $f] + close $f + set l +} {{} 1} +test io-12.6 {Tcl_Eof, eof char, lf write, auto read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar \x1a + puts $f abc\ndef + close $f + set s [file size test1] + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $s $l $e +} {9 8 1} +test io-12.7 {Tcl_Eof, eof char, lf write, lf read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar \x1a + puts $f abc\ndef + close $f + set s [file size test1] + set f [open test1 r] + fconfigure $f -translation lf -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $s $l $e +} {9 8 1} +test io-12.8 {Tcl_Eof, eof char, cr write, auto read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr -eofchar \x1a + puts $f abc\ndef + close $f + set s [file size test1] + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $s $l $e +} {9 8 1} +test io-12.9 {Tcl_Eof, eof char, cr write, cr read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr -eofchar \x1a + puts $f abc\ndef + close $f + set s [file size test1] + set f [open test1 r] + fconfigure $f -translation cr -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $s $l $e +} {9 8 1} +test io-12.10 {Tcl_Eof, eof char, crlf write, auto read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf -eofchar \x1a + puts $f abc\ndef + close $f + set s [file size test1] + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $s $l $e +} {11 8 1} +test io-12.11 {Tcl_Eof, eof char, crlf write, crlf read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf -eofchar \x1a + puts $f abc\ndef + close $f + set s [file size test1] + set f [open test1 r] + fconfigure $f -translation crlf -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $s $l $e +} {11 8 1} +test io-12.12 {Tcl_Eof, eof char in middle, lf write, auto read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + set i [format abc\ndef\n%cqrs\nuvw 26] + puts $f $i + close $f + set c [file size test1] + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $c $l $e +} {17 8 1} +test io-12.13 {Tcl_Eof, eof char in middle, lf write, lf read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + set i [format abc\ndef\n%cqrs\nuvw 26] + puts $f $i + close $f + set c [file size test1] + set f [open test1 r] + fconfigure $f -translation lf -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $c $l $e +} {17 8 1} +test io-12.14 {Tcl_Eof, eof char in middle, cr write, auto read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr -eofchar {} + set i [format abc\ndef\n%cqrs\nuvw 26] + puts $f $i + close $f + set c [file size test1] + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $c $l $e +} {17 8 1} +test io-12.15 {Tcl_Eof, eof char in middle, cr write, cr read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr -eofchar {} + set i [format abc\ndef\n%cqrs\nuvw 26] + puts $f $i + close $f + set c [file size test1] + set f [open test1 r] + fconfigure $f -translation cr -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $c $l $e +} {17 8 1} +test io-12.16 {Tcl_Eof, eof char in middle, crlf write, auto read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf -eofchar {} + set i [format abc\ndef\n%cqrs\nuvw 26] + puts $f $i + close $f + set c [file size test1] + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $c $l $e +} {21 8 1} +test io-12.17 {Tcl_Eof, eof char in middle, crlf write, crlf read} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf -eofchar {} + set i [format abc\ndef\n%cqrs\nuvw 26] + puts $f $i + close $f + set c [file size test1] + set f [open test1 r] + fconfigure $f -translation crlf -eofchar \x1a + set l [string length [read $f]] + set e [eof $f] + close $f + list $c $l $e +} {21 8 1} + +# Test Tcl_InputBlocked + +test io-13.1 {Tcl_InputBlocked on nonblocking pipe} {unixOrPc tempNotPc} { + set f1 [open "|[list $tcltest]" r+] + puts $f1 {puts hello_from_pipe} + flush $f1 + gets $f1 + fconfigure $f1 -blocking off -buffering full + puts $f1 {puts hello} + set x "" + lappend x [gets $f1] + lappend x [fblocked $f1] + flush $f1 + after 200 + lappend x [gets $f1] + lappend x [fblocked $f1] + lappend x [gets $f1] + lappend x [fblocked $f1] + close $f1 + set x +} {{} 1 hello 0 {} 1} +test io-13.2 {Tcl_InputBlocked on blocking pipe} {unixOrPc tempNotPc} { + set f1 [open "|[list $tcltest]" r+] + fconfigure $f1 -buffering line + puts $f1 {puts hello_from_pipe} + set x "" + lappend x [gets $f1] + lappend x [fblocked $f1] + puts $f1 {exit} + lappend x [gets $f1] + lappend x [fblocked $f1] + lappend x [eof $f1] + close $f1 + set x +} {hello_from_pipe 0 {} 0 1} +test io-13.3 {Tcl_InputBlocked vs files, short read} { + removeFile test1 + set f [open test1 w] + puts $f abcdefghijklmnop + close $f + set f [open test1 r] + set l "" + lappend l [fblocked $f] + lappend l [read $f 3] + lappend l [fblocked $f] + lappend l [read -nonewline $f] + lappend l [fblocked $f] + lappend l [eof $f] + close $f + set l +} {0 abc 0 defghijklmnop 0 1} +test io-13.4 {Tcl_InputBlocked vs files, event driven read} { + proc in {f} { + global l x + lappend l [read $f 3] + if {[eof $f]} {lappend l eof; close $f; set x done} + } + removeFile test1 + set f [open test1 w] + puts $f abcdefghijklmnop + close $f + set f [open test1 r] + set l "" + fileevent $f readable [list in $f] + vwait x + set l +} {abc def ghi jkl mno {p +} eof} +test io-13.5 {Tcl_InputBlocked vs files, short read, nonblocking} {nonBlockFiles} { + removeFile test1 + set f [open test1 w] + puts $f abcdefghijklmnop + close $f + set f [open test1 r] + fconfigure $f -blocking off + set l "" + lappend l [fblocked $f] + lappend l [read $f 3] + lappend l [fblocked $f] + lappend l [read -nonewline $f] + lappend l [fblocked $f] + lappend l [eof $f] + close $f + set l +} {0 abc 0 defghijklmnop 0 1} +test io-13.6 {Tcl_InputBlocked vs files, event driven read} {nonBlockFiles} { + proc in {f} { + global l x + lappend l [read $f 3] + if {[eof $f]} {lappend l eof; close $f; set x done} + } + removeFile test1 + set f [open test1 w] + puts $f abcdefghijklmnop + close $f + set f [open test1 r] + fconfigure $f -blocking off + set l "" + fileevent $f readable [list in $f] + vwait x + set l +} {abc def ghi jkl mno {p +} eof} + +# Test Tcl_InputBuffered + +test io-14.1 {Tcl_InputBuffered} { + set f [open longfile r] + fconfigure $f -buffersize 4096 + read $f 3 + set l "" + lappend l [testchannel inputbuffered $f] + lappend l [tell $f] + close $f + set l +} {4093 3} +test io-14.2 {Tcl_InputBuffered, test input flushing on seek} { + set f [open longfile r] + fconfigure $f -buffersize 4096 + read $f 3 + set l "" + lappend l [testchannel inputbuffered $f] + lappend l [tell $f] + seek $f 0 current + lappend l [testchannel inputbuffered $f] + lappend l [tell $f] + close $f + set l +} {4093 3 0 3} + +# Test Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize + +test io-15.1 {Tcl_GetChannelBufferSize, default buffer size} { + set f [open longfile r] + set s [fconfigure $f -buffersize] + close $f + set s +} 4096 +test io-15.2 {Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize} { + set f [open longfile r] + set l "" + lappend l [fconfigure $f -buffersize] + fconfigure $f -buffersize 10000 + lappend l [fconfigure $f -buffersize] + fconfigure $f -buffersize 1 + lappend l [fconfigure $f -buffersize] + fconfigure $f -buffersize -1 + lappend l [fconfigure $f -buffersize] + fconfigure $f -buffersize 0 + lappend l [fconfigure $f -buffersize] + fconfigure $f -buffersize 100000 + lappend l [fconfigure $f -buffersize] + fconfigure $f -buffersize 10000000 + lappend l [fconfigure $f -buffersize] + close $f + set l +} {4096 10000 4096 4096 4096 100000 4096} + +# Test Tcl_SetChannelOption, Tcl_GetChannelOption + +test io-16.1 {Tcl_GetChannelOption} { + removeFile test1 + set f1 [open test1 w] + set x [fconfigure $f1 -blocking] + close $f1 + set x +} 1 +# +# Test 17.2 was removed. +# +test io-16.2 {Tcl_GetChannelOption} { + removeFile test1 + set f1 [open test1 w] + set x [fconfigure $f1 -buffering] + close $f1 + set x +} full +test io-16.3 {Tcl_GetChannelOption} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -buffering line + set x [fconfigure $f1 -buffering] + close $f1 + set x +} line +test io-16.4 {Tcl_GetChannelOption, Tcl_SetChannelOption} { + removeFile test1 + set f1 [open test1 w] + set l "" + lappend l [fconfigure $f1 -buffering] + fconfigure $f1 -buffering line + lappend l [fconfigure $f1 -buffering] + fconfigure $f1 -buffering none + lappend l [fconfigure $f1 -buffering] + fconfigure $f1 -buffering line + lappend l [fconfigure $f1 -buffering] + fconfigure $f1 -buffering full + lappend l [fconfigure $f1 -buffering] + close $f1 + set l +} {full line none line full} +test io-16.5 {Tcl_GetChannelOption, invariance} { + removeFile test1 + set f1 [open test1 w] + set l "" + lappend l [fconfigure $f1 -buffering] + lappend l [list [catch {fconfigure $f1 -buffering green} msg] $msg] + lappend l [fconfigure $f1 -buffering] + close $f1 + set l +} {full {1 {bad value for -buffering: must be one of full, line, or none}} full} +test io-16.6 {Tcl_SetChannelOption, multiple options} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -buffering line + puts $f1 hello + puts $f1 bye + set x [file size test1] + close $f1 + set x +} 10 +test io-16.7 {Tcl_SetChannelOption, buffering, translation} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf + puts $f1 hello + puts $f1 bye + set x "" + fconfigure $f1 -buffering line + lappend x [file size test1] + puts $f1 really_bye + lappend x [file size test1] + close $f1 + set x +} {0 21} +test io-16.8 {Tcl_SetChannelOption, different buffering options} { + removeFile test1 + set f1 [open test1 w] + set l "" + fconfigure $f1 -translation lf -buffering none -eofchar {} + puts -nonewline $f1 hello + lappend l [file size test1] + puts -nonewline $f1 hello + lappend l [file size test1] + fconfigure $f1 -buffering full + puts -nonewline $f1 hello + lappend l [file size test1] + fconfigure $f1 -buffering none + lappend l [file size test1] + puts -nonewline $f1 hello + lappend l [file size test1] + close $f1 + lappend l [file size test1] + set l +} {5 10 10 10 20 20} +test io-16.9 {Tcl_SetChannelOption, blocking mode} {nonBlockFiles} { + removeFile test1 + set f1 [open test1 w] + close $f1 + set f1 [open test1 r] + set x "" + lappend x [fconfigure $f1 -blocking] + fconfigure $f1 -blocking off + lappend x [fconfigure $f1 -blocking] + lappend x [gets $f1] + lappend x [read $f1 1000] + lappend x [fblocked $f1] + lappend x [eof $f1] + close $f1 + set x +} {1 0 {} {} 0 1} +test io-16.10 {Tcl_SetChannelOption, blocking mode} {unixOrPc tempNotPc} { + removeFile pipe + set f1 [open pipe w] + puts $f1 {gets stdin} + puts $f1 {after 100} + puts $f1 {puts hi} + puts $f1 {gets stdin} + close $f1 + set x "" + set f1 [open "|[list $tcltest pipe]" r+] + fconfigure $f1 -blocking off -buffering line + lappend x [fconfigure $f1 -blocking] + lappend x [gets $f1] + lappend x [fblocked $f1] + puts $f1 hello + lappend x [gets $f1] + lappend x [fblocked $f1] + puts $f1 bye + lappend x [gets $f1] + lappend x [fblocked $f1] + fconfigure $f1 -blocking on + lappend x [fconfigure $f1 -blocking] + lappend x [gets $f1] + lappend x [fblocked $f1] + lappend x [eof $f1] + lappend x [gets $f1] + lappend x [eof $f1] + close $f1 + set x +} {0 {} 1 {} 1 {} 1 1 hi 0 0 {} 1} +test io-16.11 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} { + removeFile test1 + set f [open test1 w] + fconfigure $f -buffersize -10 + set x [fconfigure $f -buffersize] + close $f + set x +} 4096 +test io-16.12 {Tcl_SetChannelOption, Tcl_GetChannelOption buffer size} { + removeFile test1 + set f [open test1 w] + fconfigure $f -buffersize 10000000 + set x [fconfigure $f -buffersize] + close $f + set x +} 4096 +test io-16.13 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} { + removeFile test1 + set f [open test1 w] + fconfigure $f -buffersize 40000 + set x [fconfigure $f -buffersize] + close $f + set x +} 40000 +test io-16.14 {Tcl_SetChannelOption, setting read mode independently} \ + {socket} { + proc accept {s a p} {close $s} + set s1 [socket -server accept 0] + set port [lindex [fconfigure $s1 -sockname] 2] + set s2 [socket localhost $port] + update + fconfigure $s2 -translation {auto lf} + set modes [fconfigure $s2 -translation] + close $s1 + close $s2 + set modes +} {auto lf} +test io-16.15 {Tcl_SetChannelOption, setting read mode independently} \ + {socket} { + proc accept {s a p} {close $s} + set s1 [socket -server accept 0] + set port [lindex [fconfigure $s1 -sockname] 2] + set s2 [socket localhost $port] + update + fconfigure $s2 -translation {auto crlf} + set modes [fconfigure $s2 -translation] + close $s1 + close $s2 + set modes +} {auto crlf} +test io-16.16 {Tcl_SetChannelOption, setting read mode independently} \ + {socket} { + proc accept {s a p} {close $s} + set s1 [socket -server accept 0] + set port [lindex [fconfigure $s1 -sockname] 2] + set s2 [socket localhost $port] + update + fconfigure $s2 -translation {auto cr} + set modes [fconfigure $s2 -translation] + close $s1 + close $s2 + set modes +} {auto cr} +test io-16.17 {Tcl_SetChannelOption, setting read mode independently} \ + {socket} { + proc accept {s a p} {close $s} + set s1 [socket -server accept 0] + set port [lindex [fconfigure $s1 -sockname] 2] + set s2 [socket localhost $port] + update + fconfigure $s2 -translation {auto auto} + set modes [fconfigure $s2 -translation] + close $s1 + close $s2 + set modes +} {auto crlf} + +test io-17.1 {POSIX open access modes: RDWR} { + removeFile test3 + set f [open test3 w] + puts $f xyzzy + close $f + set f [open test3 RDWR] + puts -nonewline $f "ab" + seek $f 0 current + set x [gets $f] + close $f + set f [open test3 r] + lappend x [gets $f] + close $f + set x +} {zzy abzzy} +test io-17.2 {POSIX open access modes: CREAT} {unixOnly} { + removeFile test3 + set f [open test3 {WRONLY CREAT} 0600] + file stat test3 stats + set x [format "0%o" [expr $stats(mode)&0777]] + puts $f "line 1" + close $f + set f [open test3 r] + lappend x [gets $f] + close $f + set x +} {0600 {line 1}} +test io-17.3 {POSIX open access modes: CREAT} {$testConfig(unix) && ([exec umask] == 2)} { + # This test only works if your umask is 2, like ouster's. + removeFile test3 + set f [open test3 {WRONLY CREAT}] + close $f + file stat test3 stats + format "0%o" [expr $stats(mode)&0777] +} 0664 +test io-17.4 {POSIX open access modes: CREAT} { + removeFile test3 + set f [open test3 w] + fconfigure $f -eofchar {} + puts $f xyzzy + close $f + set f [open test3 {WRONLY CREAT}] + fconfigure $f -eofchar {} + puts -nonewline $f "ab" + close $f + set f [open test3 r] + set x [gets $f] + close $f + set x +} abzzy +test io-17.5 {POSIX open access modes: APPEND} { + removeFile test3 + set f [open test3 w] + fconfigure $f -translation lf -eofchar {} + puts $f xyzzy + close $f + set f [open test3 {WRONLY APPEND}] + fconfigure $f -translation lf + puts $f "new line" + seek $f 0 + puts $f "abc" + close $f + set f [open test3 r] + fconfigure $f -translation lf + set x "" + seek $f 6 current + lappend x [gets $f] + lappend x [gets $f] + close $f + set x +} {{new line} abc} +test io-17.6 {POSIX open access modes: EXCL} { + removeFile test3 + set f [open test3 w] + puts $f xyzzy + close $f + set msg [list [catch {open test3 {WRONLY CREAT EXCL}} msg] $msg] + regsub " already " $msg " " msg + string tolower $msg +} {1 {couldn't open "test3": file exists}} +test io-17.7 {POSIX open access modes: EXCL} { + removeFile test3 + set f [open test3 {WRONLY CREAT EXCL}] + fconfigure $f -eofchar {} + puts $f "A test line" + close $f + viewFile test3 +} {A test line} +test io-17.8 {POSIX open access modes: TRUNC} { + removeFile test3 + set f [open test3 w] + puts $f xyzzy + close $f + set f [open test3 {WRONLY TRUNC}] + puts $f abc + close $f + set f [open test3 r] + set x [gets $f] + close $f + set x +} abc +test io-17.9 {POSIX open access modes: NONBLOCK} {nonPortable macOrUnix} { + removeFile test3 + set f [open test3 {WRONLY NONBLOCK CREAT}] + puts $f "NONBLOCK test" + close $f + set f [open test3 r] + set x [gets $f] + close $f + set x +} {NONBLOCK test} +test io-17.10 {POSIX open access modes: RDONLY} { + set f [open test1 w] + puts $f "two lines: this one" + puts $f "and this" + close $f + set f [open test1 RDONLY] + set x [list [gets $f] [catch {puts $f Test} msg] $msg] + close $f + string compare [string tolower $x] \ + [list {two lines: this one} 1 \ + [format "channel \"%s\" wasn't opened for writing" $f]] +} 0 +test io-17.11 {POSIX open access modes: RDONLY} { + removeFile test3 + string tolower [list [catch {open test3 RDONLY} msg] $msg] +} {1 {couldn't open "test3": no such file or directory}} +test io-17.12 {POSIX open access modes: WRONLY} { + removeFile test3 + string tolower [list [catch {open test3 WRONLY} msg] $msg] +} {1 {couldn't open "test3": no such file or directory}} +test io-17.13 {POSIX open access modes: WRONLY} { + makeFile xyzzy test3 + set f [open test3 WRONLY] + fconfigure $f -eofchar {} + puts -nonewline $f "ab" + seek $f 0 current + set x [list [catch {gets $f} msg] $msg] + close $f + lappend x [viewFile test3] + string compare [string tolower $x] \ + [list 1 "channel \"$f\" wasn't opened for reading" abzzy] +} 0 +test io-17.14 {POSIX open access modes: RDWR} { + removeFile test3 + string tolower [list [catch {open test3 RDWR} msg] $msg] +} {1 {couldn't open "test3": no such file or directory}} +test io-17.15 {POSIX open access modes: RDWR} { + makeFile xyzzy test3 + set f [open test3 RDWR] + puts -nonewline $f "ab" + seek $f 0 current + set x [gets $f] + close $f + lappend x [viewFile test3] +} {zzy abzzy} +if {![file exists ~/_test_] && [file writable ~]} { + test io-17.16 {tilde substitution in open} { + set f [open ~/_test_ w] + puts $f "Some text" + close $f + set x [file exists [file join $env(HOME) _test_]] + removeFile [file join $env(HOME) _test_] + set x + } 1 +} +test io-17.17 {tilde substitution in open} { + set home $env(HOME) + unset env(HOME) + set x [list [catch {open ~/foo} msg] $msg] + set env(HOME) $home + set x +} {1 {couldn't find HOME environment variable to expand path}} + +test io-18.1 {Tcl_FileeventCmd: errors} { + list [catch {fileevent foo} msg] $msg +} {1 {wrong # args: must be "fileevent channelId event ?script?}} +test io-18.2 {Tcl_FileeventCmd: errors} { + list [catch {fileevent foo bar baz q} msg] $msg +} {1 {wrong # args: must be "fileevent channelId event ?script?}} +test io-18.3 {Tcl_FileeventCmd: errors} { + list [catch {fileevent gorp readable} msg] $msg +} {1 {can not find channel named "gorp"}} +test io-18.4 {Tcl_FileeventCmd: errors} { + list [catch {fileevent gorp writable} msg] $msg +} {1 {can not find channel named "gorp"}} +test io-18.5 {Tcl_FileeventCmd: errors} { + list [catch {fileevent gorp who-knows} msg] $msg +} {1 {bad event name "who-knows": must be readable or writable}} + +# +# Test fileevent on a file +# + +set f [open foo w+] + +test io-19.1 {Tcl_FileeventCmd: creating, deleting, querying} { + list [fileevent $f readable] [fileevent $f writable] +} {{} {}} +test io-19.2 {Tcl_FileeventCmd: replacing} { + set result {} + fileevent $f r "first script" + lappend result [fileevent $f readable] + fileevent $f r "new script" + lappend result [fileevent $f readable] + fileevent $f r "yet another" + lappend result [fileevent $f readable] + fileevent $f r "" + lappend result [fileevent $f readable] +} {{first script} {new script} {yet another} {}} + +# +# Test fileevent on a pipe +# + +if {($tcl_platform(platform) != "macintosh") && \ + ($testConfig(unixExecs) == 1)} { + +catch {set f2 [open "|[list cat -u]" r+]} +catch {set f3 [open "|[list cat -u]" r+]} + +test io-20.1 {Tcl_FileeventCmd: creating, deleting, querying} { + set result {} + fileevent $f readable "script 1" + lappend result [fileevent $f readable] [fileevent $f writable] + fileevent $f writable "write script" + lappend result [fileevent $f readable] [fileevent $f writable] + fileevent $f readable {} + lappend result [fileevent $f readable] [fileevent $f writable] + fileevent $f writable {} + lappend result [fileevent $f readable] [fileevent $f writable] +} {{script 1} {} {script 1} {write script} {} {write script} {} {}} +test io-20.2 {Tcl_FileeventCmd: deleting when many present} { + set result {} + lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r] + fileevent $f r "read f" + fileevent $f2 r "read f2" + fileevent $f3 r "read f3" + lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r] + fileevent $f2 r {} + lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r] + fileevent $f3 r {} + lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r] + fileevent $f r {} + lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r] +} {{} {} {} {read f} {read f2} {read f3} {read f} {} {read f3} {read f} {} {} {} {} {}} + +test io-21.1 {FileEventProc procedure: normal read event} { + fileevent $f2 readable { + set x [gets $f2]; fileevent $f2 readable {} + } + puts $f2 text; flush $f2 + set x initial + vwait x + set x +} {text} +test io-21.2 {FileEventProc procedure: error in read event} { + proc bgerror args { + global x + set x $args + } + fileevent $f2 readable {error bogus} + puts $f2 text; flush $f2 + set x initial + vwait x + rename bgerror {} + list $x [fileevent $f2 readable] +} {bogus {}} +test io-21.3 {FileEventProc procedure: normal write event} { + fileevent $f2 writable { + lappend x "triggered" + incr count -1 + if {$count <= 0} { + fileevent $f2 writable {} + } + } + set x initial + set count 3 + vwait x + vwait x + vwait x + set x +} {initial triggered triggered triggered} +test io-21.4 {FileEventProc procedure: eror in write event} { + proc bgerror args { + global x + set x $args + } + fileevent $f2 writable {error bad-write} + set x initial + vwait x + rename bgerror {} + list $x [fileevent $f2 writable] +} {bad-write {}} +test io-21.5 {FileEventProc procedure: end of file} {unixOrPc} { + set f4 [open "|[list $tcltest cat << foo]" r] + fileevent $f4 readable { + if {[gets $f4 line] < 0} { + lappend x eof + fileevent $f4 readable {} + } else { + lappend x $line + } + } + set x initial + vwait x + vwait x + close $f4 + set x +} {initial foo eof} + +catch {close $f2} +catch {close $f3} + +} + # Closes if {($platform(platform) != "macintosh") && \ + # ($testConfig(unixExecs) == 1)} clause + +close $f +makeFile "foo bar" foo +test io-22.1 {DeleteFileEvent, cleanup on close} { + set f [open foo r] + fileevent $f readable { + lappend x "binding triggered: \"[gets $f]\"" + fileevent $f readable {} + } + close $f + set x initial + after 100 { set y done } + vwait y + set x +} {initial} +test io-22.2 {DeleteFileEvent, cleanup on close} { + set f [open foo r] + set f2 [open foo r] + fileevent $f readable { + lappend x "f triggered: \"[gets $f]\"" + fileevent $f readable {} + } + fileevent $f2 readable { + lappend x "f2 triggered: \"[gets $f2]\"" + fileevent $f2 readable {} + } + close $f + set x initial + vwait x + close $f2 + set x +} {initial {f2 triggered: "foo bar"}} +test io-22.3 {DeleteFileEvent, cleanup on close} { + set f [open foo r] + set f2 [open foo r] + set f3 [open foo r] + fileevent $f readable {f script} + fileevent $f2 readable {f2 script} + fileevent $f3 readable {f3 script} + set x {} + close $f2 + lappend x [catch {fileevent $f readable} msg] $msg \ + [catch {fileevent $f2 readable}] \ + [catch {fileevent $f3 readable} msg] $msg + close $f3 + lappend x [catch {fileevent $f readable} msg] $msg \ + [catch {fileevent $f2 readable}] \ + [catch {fileevent $f3 readable}] + close $f + lappend x [catch {fileevent $f readable}] \ + [catch {fileevent $f2 readable}] \ + [catch {fileevent $f3 readable}] +} {0 {f script} 1 0 {f3 script} 0 {f script} 1 1 1 1 1} + +# Execute these tests only if the "testfevent" command is present. + +if {[info commands testfevent] == "testfevent"} { + +test io-23.1 {Tcl event loop vs multiple interpreters} { + testfevent create + testfevent cmd { + set f [open foo r] + set x "no event" + fileevent $f readable { + set x "f triggered: [gets $f]" + fileevent $f readable {} + } + } + after 1 ;# We must delay because Windows takes a little time to notice + update + testfevent cmd {close $f} + list [testfevent cmd {set x}] [testfevent cmd {info commands after}] +} {{f triggered: foo bar} after} +test io-23.2 {Tcl event loop vs multiple interpreters} { + testfevent create + testfevent cmd { + set x 0 + after 100 {set x triggered} + vwait x + set x + } +} {triggered} +test io-23.3 {Tcl event loop vs multiple interpreters} { + testfevent create + testfevent cmd { + set x 0 + after 10 {lappend x timer} + after 30 + set result $x + update idletasks + lappend result $x + update + lappend result $x + } +} {0 0 {0 timer}} + +test io-24.1 {fileevent vs multiple interpreters} { + set f [open foo r] + set f2 [open foo r] + set f3 [open foo r] + fileevent $f readable {script 1} + testfevent create + testfevent share $f2 + testfevent cmd "fileevent $f2 readable {script 2}" + fileevent $f3 readable {sript 3} + set x {} + lappend x [fileevent $f2 readable] + testfevent delete + lappend x [fileevent $f readable] [fileevent $f2 readable] \ + [fileevent $f3 readable] + close $f + close $f2 + close $f3 + set x +} {{} {script 1} {} {sript 3}} +test io-24.2 {deleting fileevent on interpreter delete} { + set f [open foo r] + set f2 [open foo r] + set f3 [open foo r] + set f4 [open foo r] + fileevent $f readable {script 1} + testfevent create + testfevent share $f2 + testfevent share $f3 + testfevent cmd "fileevent $f2 readable {script 2} + fileevent $f3 readable {script 3}" + fileevent $f4 readable {script 4} + testfevent delete + set x [list [fileevent $f readable] [fileevent $f2 readable] \ + [fileevent $f3 readable] [fileevent $f4 readable]] + close $f + close $f2 + close $f3 + close $f4 + set x +} {{script 1} {} {} {script 4}} +test io-24.3 {deleting fileevent on interpreter delete} { + set f [open foo r] + set f2 [open foo r] + set f3 [open foo r] + set f4 [open foo r] + testfevent create + testfevent share $f3 + testfevent share $f4 + fileevent $f readable {script 1} + fileevent $f2 readable {script 2} + testfevent cmd "fileevent $f3 readable {script 3} + fileevent $f4 readable {script 4}" + testfevent delete + set x [list [fileevent $f readable] [fileevent $f2 readable] \ + [fileevent $f3 readable] [fileevent $f4 readable]] + close $f + close $f2 + close $f3 + close $f4 + set x +} {{script 1} {script 2} {} {}} +test io-24.4 {file events on shared files and multiple interpreters} { + set f [open foo r] + set f2 [open foo r] + testfevent create + testfevent share $f + testfevent cmd "fileevent $f readable {script 1}" + fileevent $f readable {script 2} + fileevent $f2 readable {script 3} + set x [list [fileevent $f2 readable] \ + [testfevent cmd "fileevent $f readable"] \ + [fileevent $f readable]] + testfevent delete + close $f + close $f2 + set x +} {{script 3} {script 1} {script 2}} +test io-24.5 {file events on shared files, deleting file events} { + set f [open foo r] + testfevent create + testfevent share $f + testfevent cmd "fileevent $f readable {script 1}" + fileevent $f readable {script 2} + testfevent cmd "fileevent $f readable {}" + set x [list [testfevent cmd "fileevent $f readable"] \ + [fileevent $f readable]] + testfevent delete + close $f + set x +} {{} {script 2}} +test io-24.6 {file events on shared files, deleting file events} { + set f [open foo r] + testfevent create + testfevent share $f + testfevent cmd "fileevent $f readable {script 1}" + fileevent $f readable {script 2} + fileevent $f readable {} + set x [list [testfevent cmd "fileevent $f readable"] \ + [fileevent $f readable]] + testfevent delete + close $f + set x +} {{script 1} {}} + +} + +# The above curly closes the test for presence of the "testfevent" command. + +test io-25.1 {testing readability conditions} { + set f [open bar w] + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + close $f + set f [open bar r] + fileevent $f readable [list consume $f] + proc consume {f} { + global x l + lappend l called + if {[eof $f]} { + close $f + set x done + } else { + gets $f + } + } + set l "" + set x not_done + vwait x + list $x $l +} {done {called called called called called called called}} +test io-25.2 {testing readability conditions} {nonBlockFiles} { + set f [open bar w] + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + close $f + set f [open bar r] + fileevent $f readable [list consume $f] + fconfigure $f -blocking off + proc consume {f} { + global x l + lappend l called + if {[eof $f]} { + close $f + set x done + } else { + gets $f + } + } + set l "" + set x not_done + vwait x + list $x $l +} {done {called called called called called called called}} +test io-25.3 {testing readability conditions} {unixOnly nonBlockFiles} { + set f [open bar w] + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + puts $f abcdefg + close $f + set f [open my_script w] + puts $f { + proc copy_slowly {f} { + while {![eof $f]} { + puts [gets $f] + after 200 + } + close $f + } + } + close $f + set f [open "|[list $tcltest]" r+] + fileevent $f readable [list consume $f] + fconfigure $f -buffering line + fconfigure $f -blocking off + proc consume {f} { + global x l + if {[eof $f]} { + set x done + } else { + gets $f + lappend l [fblocked $f] + gets $f + lappend l [fblocked $f] + } + } + set l "" + set x not_done + puts $f {source my_script} + puts $f {set f [open bar r]} + puts $f {copy_slowly $f} + puts $f {exit} + vwait x + close $f + list $x $l +} {done {0 1 0 1 0 1 0 1 0 1 0 1 0 0}} +test io-25.4 {lf write, testing readability, ^Z termination, auto read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set c [format "abc\ndef\n%c" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.5 {lf write, testing readability, ^Z in middle, auto read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set c [format "abc\ndef\n%cfoo\nbar\n" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.6 {cr write, testing readability, ^Z termination, auto read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + set c [format "abc\ndef\n%c" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.7 {cr write, testing readability, ^Z in middle, auto read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + set c [format "abc\ndef\n%cfoo\nbar\n" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.8 {crlf write, testing readability, ^Z termination, auto read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set c [format "abc\ndef\n%c" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -translation auto -eofchar \x1a + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.9 {crlf write, testing readability, ^Z in middle, auto read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set c [format "abc\ndef\n%cfoo\nbar\n" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation auto + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.10 {lf write, testing readability, ^Z in middle, lf read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set c [format "abc\ndef\n%cfoo\nbar\n" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation lf + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.11 {lf write, testing readability, ^Z termination, lf read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + set c [format "abc\ndef\n%c" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -translation lf -eofchar \x1a + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.12 {cr write, testing readability, ^Z in middle, cr read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + set c [format "abc\ndef\n%cfoo\nbar\n" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation cr + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.13 {cr write, testing readability, ^Z termination, cr read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation cr + set c [format "abc\ndef\n%c" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -translation cr -eofchar \x1a + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.14 {crlf write, testing readability, ^Z in middle, crlf read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set c [format "abc\ndef\n%cfoo\nbar\n" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -eofchar \x1a -translation crlf + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} +test io-25.15 {crlf write, testing readability, ^Z termi, crlf read mode} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation crlf + set c [format "abc\ndef\n%c" 26] + puts -nonewline $f $c + close $f + proc consume {f} { + global c x l + if {[eof $f]} { + set x done + close $f + } else { + lappend l [gets $f] + incr c + } + } + set c 0 + set l "" + set f [open test1 r] + fconfigure $f -translation crlf -eofchar \x1a + fileevent $f readable [list consume $f] + vwait x + list $c $l +} {3 {abc def {}}} + +test io-26.1 {testing crlf reading, leftover cr disgorgment} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f "a\rb\rc\r\n" + close $f + set f [open test1 r] + set l "" + lappend l [file size test1] + fconfigure $f -translation crlf + lappend l [read $f 1] + lappend l [tell $f] + lappend l [read $f 1] + lappend l [tell $f] + lappend l [read $f 1] + lappend l [tell $f] + lappend l [read $f 1] + lappend l [tell $f] + lappend l [read $f 1] + lappend l [tell $f] + lappend l [read $f 1] + lappend l [tell $f] + lappend l [eof $f] + lappend l [read $f 1] + lappend l [eof $f] + close $f + set l +} "7 a 1 [list \r] 2 b 3 [list \r] 4 c 5 { +} 7 0 {} 1" +test io-26.2 {testing crlf reading, leftover cr disgorgment} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f "a\rb\rc\r\n" + close $f + set f [open test1 r] + set l "" + lappend l [file size test1] + fconfigure $f -translation crlf + lappend l [read $f 2] + lappend l [tell $f] + lappend l [read $f 2] + lappend l [tell $f] + lappend l [read $f 2] + lappend l [tell $f] + lappend l [eof $f] + lappend l [read $f 2] + lappend l [tell $f] + lappend l [eof $f] + close $f + set l +} "7 [list a\r] 2 [list b\r] 4 [list c\n] 7 0 {} 7 1" +test io-26.3 {testing crlf reading, leftover cr disgorgment} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f "a\rb\rc\r\n" + close $f + set f [open test1 r] + set l "" + lappend l [file size test1] + fconfigure $f -translation crlf + lappend l [read $f 3] + lappend l [tell $f] + lappend l [read $f 3] + lappend l [tell $f] + lappend l [eof $f] + lappend l [read $f 3] + lappend l [tell $f] + lappend l [eof $f] + close $f + set l +} "7 [list a\rb] 3 [list \rc\n] 7 0 {} 7 1" +test io-26.4 {testing crlf reading, leftover cr disgorgment} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f "a\rb\rc\r\n" + close $f + set f [open test1 r] + set l "" + lappend l [file size test1] + fconfigure $f -translation crlf + lappend l [read $f 3] + lappend l [tell $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [eof $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [eof $f] + close $f + set l +} "7 [list a\rb] 3 [list \rc] 7 0 {} 7 1" +test io-26.5 {testing crlf reading, leftover cr disgorgment} { + removeFile test1 + set f [open test1 w] + fconfigure $f -translation lf + puts -nonewline $f "a\rb\rc\r\n" + close $f + set f [open test1 r] + set l "" + lappend l [file size test1] + fconfigure $f -translation crlf + lappend l [set x [gets $f]] + lappend l [tell $f] + lappend l [gets $f] + lappend l [tell $f] + lappend l [eof $f] + close $f + set l +} [list 7 a\rb\rc 7 {} 7 1] + +test io-27.1 {testing handler deletion} { + removeFile test1 + set f [open test1 w] + close $f + set f [open test1 r] + testchannelevent $f add readable [list delhandler $f] + proc delhandler {f} { + global z + set z called + testchannelevent $f delete 0 + } + set z not_called + update + close $f + set z +} called +test io-27.2 {testing handler deletion with multiple handlers} { + removeFile test1 + set f [open test1 w] + close $f + set f [open test1 r] + testchannelevent $f add readable [list delhandler $f 1] + testchannelevent $f add readable [list delhandler $f 0] + proc delhandler {f i} { + global z + lappend z "called delhandler $f $i" + testchannelevent $f delete 0 + } + set z "" + update + close $f + string compare [string tolower $z] \ + [list [list called delhandler $f 0] [list called delhandler $f 1]] +} 0 +test io-27.3 {testing handler deletion with multiple handlers} { + removeFile test1 + set f [open test1 w] + close $f + set f [open test1 r] + testchannelevent $f add readable [list notcalled $f 1] + testchannelevent $f add readable [list delhandler $f 0] + set z "" + proc notcalled {f i} { + global z + lappend z "notcalled was called!! $f $i" + } + proc delhandler {f i} { + global z + testchannelevent $f delete 1 + lappend z "delhandler $f $i called" + testchannelevent $f delete 0 + lappend z "delhandler $f $i deleted myself" + } + set z "" + update + close $f + string compare [string tolower $z] \ + [list [list delhandler $f 0 called] \ + [list delhandler $f 0 deleted myself]] +} 0 +test io-27.4 {testing handler deletion vs reentrant calls} { + removeFile test1 + set f [open test1 w] + close $f + set f [open test1 r] + testchannelevent $f add readable [list delrecursive $f] + proc delrecursive {f} { + global z u + if {"$u" == "recursive"} { + testchannelevent $f delete 0 + lappend z "delrecursive deleting recursive" + } else { + lappend z "delrecursive calling recursive" + set u recursive + update + } + } + set u toplevel + set z "" + update + close $f + string compare [string tolower $z] \ + {{delrecursive calling recursive} {delrecursive deleting recursive}} +} 0 +test io-27.5 {testing handler deletion vs reentrant calls} { + removeFile test1 + set f [open test1 w] + close $f + set f [open test1 r] + testchannelevent $f add readable [list notcalled $f] + testchannelevent $f add readable [list del $f] + proc notcalled {f} { + global z + lappend z "notcalled was called!! $f" + } + proc del {f} { + global z u + if {"$u" == "recursive"} { + testchannelevent $f delete 1 + testchannelevent $f delete 0 + lappend z "del deleted notcalled" + lappend z "del deleted myself" + } else { + set u recursive + lappend z "del calling recursive" + update + lappend z "del after update" + } + } + set z "" + set u toplevel + update + close $f + string compare [string tolower $z] \ + [list {del calling recursive} {del deleted notcalled} \ + {del deleted myself} {del after update}] +} 0 +test io-27.6 {testing handler deletion vs reentrant calls} { + removeFile test1 + set f [open test1 w] + close $f + set f [open test1 r] + testchannelevent $f add readable [list second $f] + testchannelevent $f add readable [list first $f] + proc first {f} { + global u z + if {"$u" == "toplevel"} { + lappend z "first called" + set u first + update + lappend z "first after update" + } else { + lappend z "first called not toplevel" + } + } + proc second {f} { + global u z + if {"$u" == "first"} { + lappend z "second called, first time" + set u second + testchannelevent $f delete 0 + } elseif {"$u" == "second"} { + lappend z "second called, second time" + testchannelevent $f delete 0 + } else { + lappend z "second called, cannot happen!" + testchannelevent $f removeall + } + } + set z "" + set u toplevel + update + close $f + string compare [string tolower $z] \ + [list {first called} {first called not toplevel} \ + {second called, first time} {second called, second time} \ + {first after update}] +} 0 + +test io-28.1 {Test old socket deletion on Macintosh} {socket} { + set x 0 + set result "" + proc accept {s a p} { + global x wait + fconfigure $s -blocking off + puts $s "sock[incr x]" + close $s + set wait done + } + set ss [socket -server accept 2831] + set wait "" + set cs [socket [info hostname] 2831] + vwait wait + lappend result [gets $cs] + close $cs + + set wait "" + set cs [socket [info hostname] 2831] + vwait wait + lappend result [gets $cs] + close $cs + + set wait "" + set cs [socket [info hostname] 2831] + vwait wait + lappend result [gets $cs] + close $cs + + set wait "" + set cs [socket [info hostname] 2831] + vwait wait + lappend result [gets $cs] + close $cs + close $ss + set result +} {sock1 sock2 sock3 sock4} + +test io-29.1 {TclCopyChannel} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + fcopy $f1 $f2 -command { # } + catch { fcopy $f1 $f2 } msg + close $f1 + close $f2 + string compare $msg "channel \"$f1\" is busy" +} {0} +test io-29.2 {TclCopyChannel} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + set f3 [open [info script]] + fcopy $f1 $f2 -command { # } + catch { fcopy $f3 $f2 } msg + close $f1 + close $f2 + close $f3 + string compare $msg "channel \"$f2\" is busy" +} {0} +test io-29.3 {TclCopyChannel} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + fconfigure $f1 -translation lf -blocking 0 + fconfigure $f2 -translation cr -blocking 0 + set s0 [fcopy $f1 $f2] + set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]] + close $f1 + close $f2 + set s1 [file size [info script]] + set s2 [file size test1] + if {("$s1" == "$s2") && ($s0 == $s1)} { + lappend result ok + } + set result +} {0 0 ok} +test io-29.4 {TclCopyChannel} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + fconfigure $f1 -translation lf -blocking 0 + fconfigure $f2 -translation cr -blocking 0 + fcopy $f1 $f2 -size 40 + set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]] + close $f1 + close $f2 + lappend result [file size test1] +} {0 0 40} +test io-29.5 {TclCopyChannel} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + fconfigure $f1 -translation lf -blocking 0 + fconfigure $f2 -translation lf -blocking 0 + fcopy $f1 $f2 -size -1 + set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]] + close $f1 + close $f2 + set s1 [file size [info script]] + set s2 [file size test1] + if {"$s1" == "$s2"} { + lappend result ok + } + set result +} {0 0 ok} +test io-29.6 {TclCopyChannel} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + fconfigure $f1 -translation lf -blocking 0 + fconfigure $f2 -translation lf -blocking 0 + set s0 [fcopy $f1 $f2 -size [expr [file size [info script]] + 5]] + set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]] + close $f1 + close $f2 + set s1 [file size [info script]] + set s2 [file size test1] + if {("$s1" == "$s2") && ($s0 == $s1)} { + lappend result ok + } + set result +} {0 0 ok} +test io-29.7 {TclCopyChannel} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + fconfigure $f1 -translation lf -blocking 0 + fconfigure $f2 -translation lf -blocking 0 + fcopy $f1 $f2 + set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]] + set s1 [file size [info script]] + set s2 [file size test1] + close $f1 + close $f2 + if {"$s1" == "$s2"} { + lappend result ok + } + set result +} {0 0 ok} +test io-29.8 {TclCopyChannel} {stdio} { + removeFile test1 + removeFile pipe + set f1 [open pipe w] + fconfigure $f1 -translation lf + puts $f1 { + puts ready + gets stdin + set f1 [open [info script] r] + fconfigure $f1 -translation lf + puts [read $f1 100] + close $f1 + } + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + fconfigure $f1 -translation lf + gets $f1 + puts $f1 ready + flush $f1 + set f2 [open test1 w] + fconfigure $f2 -translation lf + set s0 [fcopy $f1 $f2 -size 40] + catch {close $f1} + close $f2 + list $s0 [file size test1] +} {40 40} + +test io-30.1 {CopyData} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + fconfigure $f1 -translation lf -blocking 0 + fconfigure $f2 -translation cr -blocking 0 + fcopy $f1 $f2 -size 0 + set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]] + close $f1 + close $f2 + lappend result [file size test1] +} {0 0 0} +test io-30.2 {CopyData} { + removeFile test1 + set f1 [open [info script]] + set f2 [open test1 w] + fconfigure $f1 -translation lf -blocking 0 + fconfigure $f2 -translation cr -blocking 0 + fcopy $f1 $f2 -command {set s0} + set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]] + vwait s0 + close $f1 + close $f2 + set s1 [file size [info script]] + set s2 [file size test1] + if {("$s1" == "$s2") && ($s0 == $s1)} { + lappend result ok + } + set result +} {0 0 ok} +test io-30.3 {CopyData: background read underflow} {unixOnly} { + removeFile test1 + removeFile pipe + set f1 [open pipe w] + puts $f1 { + puts ready + flush stdout ;# Don't assume line buffered! + fcopy stdin stdout -command { set x } + vwait x + set f [open test1 w] + fconfigure $f -translation lf + puts $f "done" + close $f + } + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + set result [gets $f1] + puts $f1 line1 + flush $f1 + lappend result [gets $f1] + puts $f1 line2 + flush $f1 + lappend result [gets $f1] + close $f1 + after 500 + set f [open test1] + lappend result [read $f] + close $f + set result +} "ready line1 line2 {done\n}" +test io-30.4 {CopyData: background write overflow} {unixOnly} { + set big aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\n + for {set x 0} {$x < 12} {incr x} { + append big $big + } + removeFile test1 + removeFile pipe + set f1 [open pipe w] + puts $f1 { + puts ready + fcopy stdin stdout -command { set x } + vwait x + set f [open test1 w] + fconfigure $f -translation lf + puts $f "done" + close $f + } + close $f1 + set f1 [open "|[list $tcltest pipe]" r+] + set result [gets $f1] + fconfigure $f1 -blocking 0 + puts $f1 $big + flush $f1 + after 500 + set result "" + fileevent $f1 read { + append result [read $f1 1024] + if {[string length $result] >= [string length $big]} { + set x done + } + } + vwait x + close $f1 + set big {} + set x +} done + +proc FcopyTestAccept {sock args} { + after 1000 "close $sock" +} +proc FcopyTestDone {bytes {error {}}} { + global fcopyTestDone + if {[string length $error]} { + set fcopyTestDone 1 + } else { + set fcopyTestDone 0 + } +} +if [catch {socket -server FcopyTestAccept 2828} listen] { + puts stderr "Skipping fcopy error test" +} else { + test io-30.5 {CopyData: error during fcopy} { + set in [open [info script]] ;# 126 K + set out [socket localhost 2828] + catch {unset fcopyTestDone} + close $listen ;# This means the socket open never really succeeds + fcopy $in $out -command FcopyTestDone + if ![info exists fcopyTestDone] { + vwait fcopyTestDone ;# The error occurs here in the b.g. + } + close $in + close $out + set fcopyTestDone ;# 1 for error condition + } 1 +} +test io-30.6 {CopyData: error during fcopy} {stdio} { + removeFile pipe + removeFile test1 + catch {unset fcopyTestDone} + set f1 [open pipe w] + puts $f1 "exit 1" + close $f1 + set in [open "|[list $tcltest pipe]" r+] + set out [open test1 w] + fcopy $in $out -command [list FcopyTestDone] + if ![info exists fcopyTestDone] { + vwait fcopyTestDone + } + catch {close $in} + close $out + set fcopyTestDone ;# 0 for plain end of file +} {0} + +test io-31.1 {Recursive channel events} {socket} { + # This test checks to see if file events are delivered during recursive + # event loops when there is buffered data on the channel. + + proc accept {s a p} { + global as + fconfigure $s -translation lf + puts $s "line 1\nline2\nline3" + flush $s + set as $s + } + proc readit {s next} { + global result x + lappend result $next + if {$next == 1} { + fileevent $s readable [list readit $s 2] + vwait x + } + incr x + } + set ss [socket -server accept 2828] + + # We need to delay on some systems until the creation of the + # server socket completes. + + set done 0 + for {set i 0} {$i < 10} {incr i} { + if {![catch {set cs [socket [info hostname] 2828]}]} { + set done 1 + break + } + after 100 + } + if {$done == 0} { + close $ss + error "failed to connect to server" + } + set result {} + set x 0 + vwait as + fconfigure $cs -translation lf + lappend result [gets $cs] + fconfigure $cs -blocking off + fileevent $cs readable [list readit $cs 1] + set a [after 2000 { set x failure }] + vwait x + after cancel $a + close $as + close $ss + close $cs + list $result $x +} {{{line 1} 1 2} 2} +test io-31.2 {Testing for busy-wait in recursive channel events} {socket} { + set s [socket -server accept 3939] + proc accept {s a p} { + global counter + + set counter 0 + fconfigure $s -blocking off -buffering line -translation lf + fileevent $s readable "doit $s" + } + proc doit {s} { + global counter + + incr counter + set l [gets $s] + if {"$l" == ""} { + fileevent $s readable "doit1 $s" + after 1000 newline + } + } + proc doit1 {s} { + global counter + + incr counter + set l [gets $s] + close $s + } + proc producer {} { + global writer + + set writer [socket localhost 3939] + fconfigure $writer -buffering line + puts -nonewline $writer hello + flush $writer + } + proc newline {} { + global writer done + + puts $writer hello + flush $writer + set done 1 + } + producer + vwait done + close $writer + close $s + set counter +} 1 +test io-32.1 {ChannelEventScriptInvoker: deletion} { + proc eventScript {fd} { + close $fd + error "planned error" + set ::x whoops + } + proc bgerror {args} { + set ::x got_error + } + set f [open fooBar w] + fileevent $f writable [list eventScript $f] + set x not_done + vwait x + set x +} {got_error} + +test io-33.1 {ChannelTimerProc} { + set f [open fooBar w] + puts $f "this is a test" + close $f + set f [open fooBar r] + testchannelevent $f add readable { + read $f 1 + incr x + } + set x 0 + vwait x + vwait x + set result $x + testchannelevent $f set 0 none + after idle {set y done} + vwait y + lappend result $y +} {2 done} + +removeFile fooBar +removeFile longfile +removeFile script +removeFile output +removeFile test1 +removeFile pipe +removeFile my_script +removeFile foo +removeFile bar +removeFile test2 +removeFile test3 + +file delete cat + +set x "" +unset x diff --git a/tests/ioCmd.test b/tests/ioCmd.test new file mode 100644 index 0000000..fd39263 --- /dev/null +++ b/tests/ioCmd.test @@ -0,0 +1,512 @@ +# Commands covered: open, close, gets, read, puts, seek, tell, eof, flush, +# fblocked, fconfigure, open, channel, fcopy +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1994 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# "@(#) ioCmd.test 1.49 97/10/31 17:23:22" + +if {[string compare test [info procs test]] == 1} then {source defs} + +removeFile test1 +removeFile pipe + +set executable [list [info nameofexecutable]] + +test iocmd-1.1 {puts command} { + list [catch {puts} msg] $msg +} {1 {wrong # args: should be "puts ?-nonewline? ?channelId? string"}} +test iocmd-1.2 {puts command} { + list [catch {puts a b c d e f g} msg] $msg +} {1 {wrong # args: should be "puts ?-nonewline? ?channelId? string"}} +test iocmd-1.3 {puts command} { + list [catch {puts froboz -nonewline kablooie} msg] $msg +} {1 {bad argument "kablooie": should be "nonewline"}} +test iocmd-1.4 {puts command} { + list [catch {puts froboz hello} msg] $msg +} {1 {can not find channel named "froboz"}} +test iocmd-1.5 {puts command} { + list [catch {puts stdin hello} msg] $msg +} {1 {channel "stdin" wasn't opened for writing}} +test iocmd-1.6 {puts command} { + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + puts -nonewline $f foobar + close $f + file size test1 +} 6 +test iocmd-1.7 {puts command} { + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + puts $f foobar + close $f + file size test1 +} 7 +test iocmd-1.8 {puts command} { + set f [open test1 w] + fconfigure $f -translation lf -eofchar {} + puts -nonewline $f [binary format a4a5 foo bar] + close $f + file size test1 +} 9 + + +test iocmd-2.1 {flush command} { + list [catch {flush} msg] $msg +} {1 {wrong # args: should be "flush channelId"}} +test iocmd-2.2 {flush command} { + list [catch {flush a b c d e} msg] $msg +} {1 {wrong # args: should be "flush channelId"}} +test iocmd-2.3 {flush command} { + list [catch {flush foo} msg] $msg +} {1 {can not find channel named "foo"}} +test iocmd-2.4 {flush command} { + list [catch {flush stdin} msg] $msg +} {1 {channel "stdin" wasn't opened for writing}} + +test iocmd-3.1 {gets command} { + list [catch {gets} msg] $msg +} {1 {wrong # args: should be "gets channelId ?varName?"}} +test iocmd-3.2 {gets command} { + list [catch {gets a b c d e f g} msg] $msg +} {1 {wrong # args: should be "gets channelId ?varName?"}} +test iocmd-3.3 {gets command} { + list [catch {gets aaa} msg] $msg +} {1 {can not find channel named "aaa"}} +test iocmd-3.4 {gets command} { + list [catch {gets stdout} msg] $msg +} {1 {channel "stdout" wasn't opened for reading}} +test iocmd-3.5 {gets command} { + set f [open test1 w] + puts $f [binary format a4a5 foo bar] + close $f + set f [open test1 r] + set result [gets $f] + close $f + set x foo\x00 + set x "${x}bar\x00\x00" + string compare $x $result +} 0 + +test iocmd-4.1 {read command} { + list [catch {read} msg] $msg +} {1 {wrong # args: should be "read channelId ?numBytes?" or "read ?-nonewline? channelId"}} +test iocmd-4.2 {read command} { + list [catch {read a b c d e f g h} msg] $msg +} {1 {wrong # args: should be "read channelId ?numBytes?" or "read ?-nonewline? channelId"}} +test iocmd-4.3 {read command} { + list [catch {read aaa} msg] $msg +} {1 {can not find channel named "aaa"}} +test iocmd-4.4 {read command} { + list [catch {read -nonewline} msg] $msg +} {1 {wrong # args: should be "read channelId ?numBytes?" or "read ?-nonewline? channelId"}} +test iocmd-4.5 {read command} { + list [catch {read -nonew file4} msg] $msg $errorCode +} {1 {can not find channel named "-nonew"} NONE} +test iocmd-4.6 {read command} { + list [catch {read stdout} msg] $msg +} {1 {channel "stdout" wasn't opened for reading}} +test iocmd-4.7 {read command} { + list [catch {read -nonewline stdout} msg] $msg +} {1 {channel "stdout" wasn't opened for reading}} +test iocmd-4.8 {read command with incorrect combination of arguments} { + removeFile test1 + set f [open test1 w] + puts $f "Two lines: this one" + puts $f "and this one" + close $f + set f [open test1] + set x [list [catch {read -nonewline $f 20 z} msg] $msg $errorCode] + close $f + set x +} {1 {wrong # args: should be "read channelId ?numBytes?" or "read ?-nonewline? channelId"} NONE} +test iocmd-4.9 {read command} { + list [catch {read stdin foo} msg] $msg $errorCode +} {1 {bad argument "foo": should be "nonewline"} NONE} +test iocmd-4.10 {read command} { + list [catch {read file107} msg] $msg $errorCode +} {1 {can not find channel named "file107"} NONE} +test iocmd-4.11 {read command} { + set f [open test3 w] + set x [list [catch {read $f} msg] $msg $errorCode] + close $f + string compare [string tolower $x] \ + [list 1 [format "channel \"%s\" wasn't opened for reading" $f] none] +} 0 +test iocmd-4.12 {read command} { + set f [open test1] + set x [list [catch {read $f 12z} msg] $msg $errorCode] + close $f + set x +} {1 {expected integer but got "12z"} NONE} + +test iocmd-5.1 {seek command} { + list [catch {seek} msg] $msg +} {1 {wrong # args: should be "seek channelId offset ?origin?"}} +test iocmd-5.2 {seek command} { + list [catch {seek a b c d e f g} msg] $msg +} {1 {wrong # args: should be "seek channelId offset ?origin?"}} +test iocmd-5.3 {seek command} { + list [catch {seek stdin gugu} msg] $msg +} {1 {expected integer but got "gugu"}} +test iocmd-5.4 {seek command} { + list [catch {seek stdin 100 gugu} msg] $msg +} {1 {bad origin "gugu": should be start, current, or end}} + +test iocmd-6.1 {tell command} { + list [catch {tell} msg] $msg +} {1 {wrong # args: should be "tell channelId"}} +test iocmd-6.2 {tell command} { + list [catch {tell a b c d e} msg] $msg +} {1 {wrong # args: should be "tell channelId"}} +test iocmd-6.3 {tell command} { + list [catch {tell aaa} msg] $msg +} {1 {can not find channel named "aaa"}} + +test iocmd-7.1 {close command} { + list [catch {close} msg] $msg +} {1 {wrong # args: should be "close channelId"}} +test iocmd-7.2 {close command} { + list [catch {close a b c d e} msg] $msg +} {1 {wrong # args: should be "close channelId"}} +test iocmd-7.3 {close command} { + list [catch {close aaa} msg] $msg +} {1 {can not find channel named "aaa"}} + +test iocmd-8.1 {fconfigure command} { + list [catch {fconfigure} msg] $msg +} {1 {wrong # args: should be "fconfigure channelId ?optionName? ?value? ?optionName value?..."}} +test iocmd-8.2 {fconfigure command} { + list [catch {fconfigure a b c d e f} msg] $msg +} {1 {wrong # args: should be "fconfigure channelId ?optionName? ?value? ?optionName value?..."}} +test iocmd-8.3 {fconfigure command} { + list [catch {fconfigure a b} msg] $msg +} {1 {can not find channel named "a"}} +test iocmd-8.4 {fconfigure command} { + removeFile test1 + set f1 [open test1 w] + set x [list [catch {fconfigure $f1 froboz} msg] $msg] + close $f1 + set x +} {1 {bad option "froboz": should be one of -blocking, -buffering, -buffersize, -eofchar, or -translation}} +test iocmd-8.5 {fconfigure command} { + list [catch {fconfigure stdin -buffering froboz} msg] $msg +} {1 {bad value for -buffering: must be one of full, line, or none}} +test iocmd-8.6 {fconfigure command} { + list [catch {fconfigure stdin -translation froboz} msg] $msg +} {1 {bad value for -translation: must be one of auto, binary, cr, lf, crlf, or platform}} +test iocmd-8.7 {fconfigure command} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -eofchar {} + set x [fconfigure $f1] + close $f1 + set x +} {-blocking 1 -buffering full -buffersize 4096 -eofchar {} -translation lf} +test iocmd-8.8 {fconfigure command} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation lf -buffering line -buffersize 3030 \ + -eofchar {} + set x "" + lappend x [fconfigure $f1 -buffering] + lappend x [fconfigure $f1] + close $f1 + set x +} {line {-blocking 1 -buffering line -buffersize 3030 -eofchar {} -translation lf}} +test iocmd-8.9 {fconfigure command} { + removeFile test1 + set f1 [open test1 w] + fconfigure $f1 -translation binary -buffering none -buffersize 4040 \ + -eofchar {} + set x [fconfigure $f1] + close $f1 + set x +} {-blocking 1 -buffering none -buffersize 4040 -eofchar {} -translation lf} +test iocmd-8.10 {fconfigure command} { + list [catch {fconfigure a b} msg] $msg +} {1 {can not find channel named "a"}} +test iocmd-8.11 {fconfigure command} { + list [catch {fconfigure stdout -froboz blarfo} msg] $msg +} {1 {bad option "-froboz": should be one of -blocking, -buffering, -buffersize, -eofchar, or -translation}} +test iocmd-8.12 {fconfigure command} { + list [catch {fconfigure stdout -b blarfo} msg] $msg +} {1 {bad option "-b": should be one of -blocking, -buffering, -buffersize, -eofchar, or -translation}} +test iocmd-8.13 {fconfigure command} { + list [catch {fconfigure stdout -buffer blarfo} msg] $msg +} {1 {bad option "-buffer": should be one of -blocking, -buffering, -buffersize, -eofchar, or -translation}} +test iocmd-8.14 {fconfigure command} { + fconfigure stdin -buffers +} 4096 +proc iocmdSSETUP {} { + uplevel { + set srv [socket -server iocmdSRV 0]; + set port [lindex [fconfigure $srv -sockname] 2]; + proc iocmdSRV {sock ip port} {close $sock} + set cli [socket localhost $port]; + } +} +proc iocmdSSHTDWN {} { + uplevel { + close $cli; + close $srv; + unset cli srv port + rename iocmdSRV {} + } +} + +test iocmd-8.15 {fconfigure command / tcp channel} {socket} { + iocmdSSETUP + set r [list [catch {fconfigure $cli -blah} msg] $msg]; + iocmdSSHTDWN + set r; +} {1 {bad option "-blah": should be one of -blocking, -buffering, -buffersize, -eofchar, -translation, -peername, or -sockname}} +test iocmd-8.16 {fconfigure command / tcp channel} {socket} { + iocmdSSETUP + set r [expr [lindex [fconfigure $cli -peername] 2]==$port]; + iocmdSSHTDWN + set r +} 1 +test iocmd-8.17 {fconfigure command / tcp channel} {nonPortable} { + # It is possible that you don't get the connection reset by peer + # error but rather a valid answer. depends of the tcp implementation + iocmdSSETUP + update; + puts $cli "blah"; flush $cli; # that flush could/should fail too + update; + set r [catch {fconfigure $cli -peername} msg] + iocmdSSHTDWN + regsub -all {can([^:])+: } $r {} r; + set r +} 1 +test iocmd-8.18 {fconfigure command / unix tty channel} {nonPortable unixOnly} { + # might fail if /dev/ttya is unavailable + set tty [open /dev/ttya] + set r [list [catch {fconfigure $tty -blah blih} msg] $msg]; + close $tty; + set r; +} {1 {bad option "-blah": should be one of -blocking, -buffering, -buffersize, -eofchar, -translation, or -mode}} +test iocmd-8.19 {fconfigure command / win tty channel} {pcOnly && !win32s} { + # None of the com port functions are implemented on Win32s. + # Also, might fail if com1 is unavailable + set tty [open com1] + set r [list [catch {fconfigure $tty -blah blih} msg] $msg]; + close $tty; + set r; +} {1 {bad option "-blah": should be one of -blocking, -buffering, -buffersize, -eofchar, -translation, or -mode}} + +test iocmd-9.1 {eof command} { + list [catch {eof} msg] $msg $errorCode +} {1 {wrong # args: should be "eof channelId"} NONE} +test iocmd-9.2 {eof command} { + list [catch {eof a b} msg] $msg $errorCode +} {1 {wrong # args: should be "eof channelId"} NONE} +test iocmd-9.3 {eof command} { + catch {close file100} + list [catch {eof file100} msg] $msg $errorCode +} {1 {can not find channel named "file100"} NONE} + +test iocmd-10.1 {fblocked command} { + list [catch {fblocked} msg] $msg +} {1 {wrong # args: should be "fblocked channelId"}} +test iocmd-10.2 {fblocked command} { + list [catch {fblocked a b c d e f g} msg] $msg +} {1 {wrong # args: should be "fblocked channelId"}} +test iocmd-10.3 {fblocked command} { + list [catch {fblocked file1000} msg] $msg +} {1 {can not find channel named "file1000"}} +test iocmd-10.4 {fblocked command} { + list [catch {fblocked stdout} msg] $msg +} {1 {channel "stdout" wasn't opened for reading}} +test iocmd-10.5 {fblocked command} { + fblocked stdin +} 0 + +removeFile test5 +test iocmd-11.1 {I/O to command pipelines} {unixOrPc unixExecs} { + set f [open test4 w] + close $f + list [catch {open "| cat < test4 > test5" w} msg] $msg $errorCode +} {1 {can't write input to command: standard input was redirected} NONE} +test iocmd-11.2 {I/O to command pipelines} {unixOrPc unixExecs} { + list [catch {open "| echo > test5" r} msg] $msg $errorCode +} {1 {can't read output from command: standard output was redirected} NONE} +test iocmd-11.3 {I/O to command pipelines} {unixOrPc unixExecs} { + list [catch {open "| echo > test5" r+} msg] $msg $errorCode +} {1 {can't read output from command: standard output was redirected} NONE} + +test iocmd-12.1 {POSIX open access modes: RDONLY} { + removeFile test1 + set f [open test1 w] + puts $f "Two lines: this one" + puts $f "and this one" + close $f + set f [open test1 RDONLY] + set x [list [gets $f] [catch {puts $f Test} msg] $msg] + close $f + string compare $x \ + "{Two lines: this one} 1 [list [format "channel \"%s\" wasn't opened for writing" $f]]" +} 0 +test iocmd-12.2 {POSIX open access modes: RDONLY} { + removeFile test3 + string tolower [list [catch {open test3 RDONLY} msg] $msg] +} {1 {couldn't open "test3": no such file or directory}} +test iocmd-12.3 {POSIX open access modes: WRONLY} { + removeFile test3 + string tolower [list [catch {open test3 WRONLY} msg] $msg] +} {1 {couldn't open "test3": no such file or directory}} +# +# Test 13.4 relies on assigning the same channel name twice. +# +test iocmd-12.4 {POSIX open access modes: WRONLY} {unixOnly} { + removeFile test3 + set f [open test3 w] + fconfigure $f -eofchar {} + puts $f xyzzy + close $f + set f [open test3 WRONLY] + fconfigure $f -eofchar {} + puts -nonewline $f "ab" + seek $f 0 current + set x [list [catch {gets $f} msg] $msg] + close $f + set f [open test3 r] + fconfigure $f -eofchar {} + lappend x [gets $f] + close $f + set y [list 1 [format "channel \"%s\" wasn't opened for reading" $f] abzzy] + string compare $x $y +} 0 +test iocmd-12.5 {POSIX open access modes: RDWR} { + removeFile test3 + string tolower [list [catch {open test3 RDWR} msg] $msg] +} {1 {couldn't open "test3": no such file or directory}} +test iocmd-12.6 {POSIX open access modes: errors} { + concat [catch {open test3 "FOO \{BAR BAZ"} msg] $msg\n$errorInfo +} "1 unmatched open brace in list +unmatched open brace in list + while processing open access modes \"FOO {BAR BAZ\" + invoked from within +\"open test3 \"FOO \\{BAR BAZ\"\"" +test iocmd-12.7 {POSIX open access modes: errors} { + list [catch {open test3 {FOO BAR BAZ}} msg] $msg +} {1 {invalid access mode "FOO": must be RDONLY, WRONLY, RDWR, APPEND, CREAT EXCL, NOCTTY, NONBLOCK, or TRUNC}} +test iocmd-12.8 {POSIX open access modes: errors} { + list [catch {open test3 {TRUNC CREAT}} msg] $msg +} {1 {access mode must include either RDONLY, WRONLY, or RDWR}} + +test iocmd-13.1 {errors in open command} { + list [catch {open} msg] $msg +} {1 {wrong # args: should be "open fileName ?access? ?permissions?"}} +test iocmd-13.2 {errors in open command} { + list [catch {open a b c d} msg] $msg +} {1 {wrong # args: should be "open fileName ?access? ?permissions?"}} +test iocmd-13.3 {errors in open command} { + list [catch {open test1 x} msg] $msg +} {1 {illegal access mode "x"}} +test iocmd-13.4 {errors in open command} { + list [catch {open test1 rw} msg] $msg +} {1 {illegal access mode "rw"}} +test iocmd-13.5 {errors in open command} { + list [catch {open test1 r+1} msg] $msg +} {1 {illegal access mode "r+1"}} +test iocmd-13.6 {errors in open command} { + string tolower [list [catch {open _non_existent_} msg] $msg $errorCode] +} {1 {couldn't open "_non_existent_": no such file or directory} {posix enoent {no such file or directory}}} + +test iocmd-14.1 {file id parsing errors} { + list [catch {eof gorp} msg] $msg $errorCode +} {1 {can not find channel named "gorp"} NONE} +test iocmd-14.2 {file id parsing errors} { + list [catch {eof filex} msg] $msg +} {1 {can not find channel named "filex"}} +test iocmd-14.3 {file id parsing errors} { + list [catch {eof file12a} msg] $msg +} {1 {can not find channel named "file12a"}} +test iocmd-14.4 {file id parsing errors} { + list [catch {eof file123} msg] $msg +} {1 {can not find channel named "file123"}} +test iocmd-14.5 {file id parsing errors} { + list [catch {eof stdout} msg] $msg +} {0 0} +test iocmd-14.6 {file id parsing errors} { + list [catch {eof stdin} msg] $msg +} {0 0} +test iocmd-14.7 {file id parsing errors} { + list [catch {eof stdout} msg] $msg +} {0 0} +test iocmd-14.8 {file id parsing errors} { + list [catch {eof stderr} msg] $msg +} {0 0} +test iocmd-14.9 {file id parsing errors} { + list [catch {eof stderr1} msg] $msg +} {1 {can not find channel named "stderr1"}} +set f [open test1 w] +close $f +set expect "1 {can not find channel named \"$f\"}" +test iocmd-14.10 {file id parsing errors} { + list [catch {eof $f} msg] $msg +} $expect + +test iocmd-15.1 {Tcl_FcopyObjCmd} { + list [catch {fcopy} msg] $msg +} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}} +test iocmd-15.2 {Tcl_FcopyObjCmd} { + list [catch {fcopy 1} msg] $msg +} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}} +test iocmd-15.3 {Tcl_FcopyObjCmd} { + list [catch {fcopy 1 2 3 4 5 6 7} msg] $msg +} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}} +test iocmd-15.4 {Tcl_FcopyObjCmd} { + list [catch {fcopy 1 2 3} msg] $msg +} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}} +test iocmd-15.5 {Tcl_FcopyObjCmd} { + list [catch {fcopy 1 2 3 4 5} msg] $msg +} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}} +set f [open test1 w] +close $f +set rfile [open test1 r] +set wfile [open test2 w] +test iocmd-15.6 {Tcl_FcopyObjCmd} { + list [catch {fcopy foo $wfile} msg] $msg +} {1 {can not find channel named "foo"}} +test iocmd-15.7 {Tcl_FcopyObjCmd} { + list [catch {fcopy $rfile foo} msg] $msg +} {1 {can not find channel named "foo"}} +test iocmd-15.8 {Tcl_FcopyObjCmd} { + list [catch {fcopy $wfile $wfile} msg] $msg +} "1 {channel \"$wfile\" wasn't opened for reading}" +test iocmd-15.9 {Tcl_FcopyObjCmd} { + list [catch {fcopy $rfile $rfile} msg] $msg +} "1 {channel \"$rfile\" wasn't opened for writing}" +test iocmd-15.10 {Tcl_FcopyObjCmd} { + list [catch {fcopy $rfile $wfile foo bar} msg] $msg +} {1 {bad switch "foo": must be -size, or -command}} +test iocmd-15.11 {Tcl_FcopyObjCmd} { + list [catch {fcopy $rfile $wfile -size foo} msg] $msg +} {1 {expected integer but got "foo"}} +test iocmd-15.12 {Tcl_FcopyObjCmd} { + list [catch {fcopy $rfile $wfile -command bar -size foo} msg] $msg +} {1 {expected integer but got "foo"}} + +close $rfile +close $wfile + +removeFile test1 +removeFile test2 +removeFile test3 +removeFile test4 +# delay long enough for background processes to finish +after 500 +removeFile test5 +removeFile pipe +removeFile output +set x "" +set x diff --git a/tests/join.test b/tests/join.test new file mode 100644 index 0000000..62af644 --- /dev/null +++ b/tests/join.test @@ -0,0 +1,48 @@ +# Commands covered: join +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) join.test 1.7 97/10/06 13:04:59 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test join-1.1 {basic join commands} { + join {a b c} xyz +} axyzbxyzc +test join-1.2 {basic join commands} { + join {a b c} {} +} abc +test join-1.3 {basic join commands} { + join {} xyz +} {} +test join-1.4 {basic join commands} { + join {12 34 56} +} {12 34 56} + +test join-2.1 {join errors} { + list [catch join msg] $msg $errorCode +} {1 {wrong # args: should be "join list ?joinString?"} NONE} +test join-2.2 {join errors} { + list [catch {join a b c} msg] $msg $errorCode +} {1 {wrong # args: should be "join list ?joinString?"} NONE} +test join-2.3 {join errors} { + list [catch {join "a \{ c" 111} msg] $msg $errorCode +} {1 {unmatched open brace in list} NONE} + +test join-3.1 {joinString is binary ok} { + string length [join {a b c} a\0b] +} 9 + +test join-3.2 {join is binary ok} { + string length [join "a\0b a\0b a\0b"] +} 11 + + diff --git a/tests/lindex.test b/tests/lindex.test new file mode 100644 index 0000000..fa2c1c6 --- /dev/null +++ b/tests/lindex.test @@ -0,0 +1,74 @@ +# Commands covered: lindex +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) lindex.test 1.7 97/02/27 16:53:56 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test lindex-1.1 {basic tests} { + lindex {a b c} 0} a +test lindex-1.2 {basic tests} { + lindex {a {b c d} x} 1} {b c d} +test lindex-1.3 {basic tests} { + lindex {a b\ c\ d x} 1} {b c d} +test lindex-1.4 {basic tests} { + lindex {a b c} 3} {} +test lindex-1.5 {basic tests} { + list [catch {lindex {a b c} -1} msg] $msg +} {0 {}} +test lindex-1.6 {basic tests} { + lindex {a b c d} end +} d +test lindex-1.7 {basic tests} { + lindex {a b c d} 100 +} {} +test lindex-1.8 {basic tests} { + lindex {a} e +} a +test lindex-1.9 {basic tests} { + lindex {} end +} {} +test lindex-1.10 {basic tests} { + lindex {a b c d} 3 +} d + +test lindex-2.1 {error conditions} { + list [catch {lindex msg} msg] $msg +} {1 {wrong # args: should be "lindex list index"}} +test lindex-2.2 {error conditions} { + list [catch {lindex 1 2 3 4} msg] $msg +} {1 {wrong # args: should be "lindex list index"}} +test lindex-2.3 {error conditions} { + list [catch {lindex 1 2a2} msg] $msg +} {1 {bad index "2a2": must be integer or "end"}} +test lindex-2.4 {error conditions} { + list [catch {lindex "a \{" 2} msg] $msg +} {1 {unmatched open brace in list}} +test lindex-2.5 {error conditions} { + list [catch {lindex {a {b c}d e} 2} msg] $msg +} {1 {list element in braces followed by "d" instead of space}} +test lindex-2.6 {error conditions} { + list [catch {lindex {a "b c"def ghi} 2} msg] $msg +} {1 {list element in quotes followed by "def" instead of space}} + +test lindex-3.1 {quoted elements} { + lindex {a "b c" d} 1 +} {b c} +test lindex-3.2 {quoted elements} { + lindex {"{}" b c} 0 +} {{}} +test lindex-3.3 {quoted elements} { + lindex {ab "c d \" x" y} 1 +} {c d " x} +test lindex-3.4 {quoted elements} { + lindex {a b {c d "e} {f g"}} 2 +} {c d "e} diff --git a/tests/link.test b/tests/link.test new file mode 100644 index 0000000..25eefb1 --- /dev/null +++ b/tests/link.test @@ -0,0 +1,234 @@ +# Commands covered: none +# +# This file contains a collection of tests for Tcl_LinkVar and related +# library procedures. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) link.test 1.12 97/01/21 21:16:04 + +if {[info commands testlink] == {}} { + puts "This application hasn't been compiled with the \"testlink\"" + puts "command, so I can't test Tcl_LinkVar et al." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +foreach i {int real bool string} { + catch {unset $i} +} +test link-1.1 {reading C variables from Tcl} { + testlink delete + testlink set 43 1.23 4 - + testlink create 1 1 1 1 + list $int $real $bool $string +} {43 1.23 1 NULL} +test link-1.2 {reading C variables from Tcl} { + testlink delete + testlink create 1 1 1 1 + testlink set -3 2 0 "A long string with spaces" + list $int $real $bool $string $int $real $bool $string +} {-3 2.0 0 {A long string with spaces} -3 2.0 0 {A long string with spaces}} + +test link-2.1 {writing C variables from Tcl} { + testlink delete + testlink set 43 1.21 4 - + testlink create 1 1 1 1 + set int "00721" + set real -10.5 + set bool true + set string abcdef + concat [testlink get] $int $real $bool $string +} {465 -10.5 1 abcdef 00721 -10.5 true abcdef} +test link-2.2 {writing bad values into variables} { + testlink delete + testlink set 43 1.23 4 - + testlink create 1 1 1 1 + list [catch {set int 09a} msg] $msg $int +} {1 {can't set "int": variable must have integer value} 43} +test link-2.3 {writing bad values into variables} { + testlink delete + testlink set 43 1.23 4 - + testlink create 1 1 1 1 + list [catch {set real 1.x3} msg] $msg $real +} {1 {can't set "real": variable must have real value} 1.23} +test link-2.4 {writing bad values into variables} { + testlink delete + testlink set 43 1.23 4 - + testlink create 1 1 1 1 + list [catch {set bool gorp} msg] $msg $bool +} {1 {can't set "bool": variable must have boolean value} 1} + +test link-3.1 {read-only variables} { + testlink delete + testlink set 43 1.23 4 - + testlink create 0 1 1 0 + list [catch {set int 4} msg] $msg $int \ + [catch {set real 10.6} msg] $msg $real \ + [catch {set bool no} msg] $msg $bool \ + [catch {set string "new value"} msg] $msg $string +} {1 {can't set "int": linked variable is read-only} 43 0 10.6 10.6 0 no no 1 {can't set "string": linked variable is read-only} NULL} +test link-3.2 {read-only variables} { + testlink delete + testlink set 43 1.23 4 - + testlink create 1 0 0 1 + list [catch {set int 4} msg] $msg $int \ + [catch {set real 10.6} msg] $msg $real \ + [catch {set bool no} msg] $msg $bool \ + [catch {set string "new value"} msg] $msg $string +} {0 4 4 1 {can't set "real": linked variable is read-only} 1.23 1 {can't set "bool": linked variable is read-only} 1 0 {new value} {new value}} + +test link-4.1 {unsetting linked variables} { + testlink delete + testlink set -6 -2.5 0 stringValue + testlink create 1 1 1 1 + unset int real bool string + list [catch {set int} msg] $msg [catch {set real} msg] $msg \ + [catch {set bool} msg] $msg [catch {set string} msg] $msg +} {0 -6 0 -2.5 0 0 0 stringValue} +test link-4.2 {unsetting linked variables} { + testlink delete + testlink set -6 -2.1 0 stringValue + testlink create 1 1 1 1 + unset int real bool string + set int 102 + set real 16 + set bool true + set string newValue + testlink get +} {102 16.0 1 newValue} + +test link-5.1 {unlinking variables} { + testlink delete + testlink set -6 -2.25 0 stringValue + testlink delete + set int xx1 + set real qrst + set bool bogus + set string 12345 + testlink get +} {-6 -2.25 0 stringValue} +test link-5.2 {unlinking variables} { + testlink delete + testlink set -6 -2.25 0 stringValue + testlink create 1 1 1 1 + testlink delete + testlink set 25 14.7 7 - + list $int $real $bool $string +} {-6 -2.25 0 stringValue} + +test link-6.1 {errors in setting up link} { + testlink delete + catch {unset int} + set int(44) 1 + list [catch {testlink create 1 1 1 1} msg] $msg +} {1 {can't set "int": variable is array}} +catch {unset int} + +test link-7.1 {access to linked variables via upvar} { + proc x {} { + upvar int y + unset y + } + testlink delete + testlink create 1 0 0 0 + testlink set 14 {} {} {} + x + list [catch {set int} msg] $msg +} {0 14} +test link-7.2 {access to linked variables via upvar} { + proc x {} { + upvar int y + return [set y] + } + testlink delete + testlink create 1 0 0 0 + testlink set 0 {} {} {} + set int + testlink set 23 {} {} {} + x + list [x] $int +} {23 23} +test link-7.3 {access to linked variables via upvar} { + proc x {} { + upvar int y + set y 44 + } + testlink delete + testlink create 0 0 0 0 + testlink set 11 {} {} {} + list [catch x msg] $msg $int +} {1 {can't set "y": linked variable is read-only} 11} +test link-7.4 {access to linked variables via upvar} { + proc x {} { + upvar int y + set y abc + } + testlink delete + testlink create 1 1 1 1 + testlink set -4 {} {} {} + list [catch x msg] $msg $int +} {1 {can't set "y": variable must have integer value} -4} +test link-7.5 {access to linked variables via upvar} { + proc x {} { + upvar real y + set y abc + } + testlink delete + testlink create 1 1 1 1 + testlink set -4 16.75 {} {} + list [catch x msg] $msg $real +} {1 {can't set "y": variable must have real value} 16.75} +test link-7.6 {access to linked variables via upvar} { + proc x {} { + upvar bool y + set y abc + } + testlink delete + testlink create 1 1 1 1 + testlink set -4 16.3 1 {} + list [catch x msg] $msg $bool +} {1 {can't set "y": variable must have boolean value} 1} + +test link-8.1 {Tcl_UpdateLinkedVar procedure} { + proc x args { + global x int real bool string + lappend x $args $int $real $bool $string + } + set x {} + testlink create 1 1 1 1 + testlink set 14 -2.0 0 xyzzy + trace var int w x + testlink update 32 4.0 3 abcd + trace vdelete int w x + set x +} {{int {} w} 32 -2.0 0 xyzzy} +test link-8.2 {Tcl_UpdateLinkedVar procedure} { + proc x args { + global x int real bool string + lappend x $args $int $real $bool $string + } + set x {} + testlink create 1 1 1 1 + testlink set 14 -2.0 0 xyzzy + testlink delete + trace var int w x + testlink update 32 4.0 6 abcd + trace vdelete int w x + set x +} {} +test link-8.3 {Tcl_UpdateLinkedVar procedure, read-only variable} { + testlink create 0 0 0 0 + list [catch {testlink update 47 {} {} {}} msg] $msg $int +} {0 {} 47} + +testlink delete +foreach i {int real bool string} { + catch {unset $i} +} diff --git a/tests/linsert.test b/tests/linsert.test new file mode 100644 index 0000000..86a47f5 --- /dev/null +++ b/tests/linsert.test @@ -0,0 +1,105 @@ +# Commands covered: linsert +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) linsert.test 1.14 97/11/18 13:54:18 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {unset lis} +catch {rename p ""} + +test linsert-1.1 {linsert command} { + linsert {1 2 3 4 5} 0 a +} {a 1 2 3 4 5} +test linsert-1.2 {linsert command} { + linsert {1 2 3 4 5} 1 a +} {1 a 2 3 4 5} +test linsert-1.3 {linsert command} { + linsert {1 2 3 4 5} 2 a +} {1 2 a 3 4 5} +test linsert-1.4 {linsert command} { + linsert {1 2 3 4 5} 3 a +} {1 2 3 a 4 5} +test linsert-1.5 {linsert command} { + linsert {1 2 3 4 5} 4 a +} {1 2 3 4 a 5} +test linsert-1.6 {linsert command} { + linsert {1 2 3 4 5} 5 a +} {1 2 3 4 5 a} +test linsert-1.7 {linsert command} { + linsert {1 2 3 4 5} 2 one two \{three \$four +} {1 2 one two \{three {$four} 3 4 5} +test linsert-1.8 {linsert command} { + linsert {\{one \$two \{three \ four \ five} 2 a b c +} {\{one {$two} a b c \{three { four} { five}} +test linsert-1.9 {linsert command} { + linsert {{1 2} {3 4} {5 6} {7 8}} 2 {x y} {a b} +} {{1 2} {3 4} {x y} {a b} {5 6} {7 8}} +test linsert-1.10 {linsert command} { + linsert {} 2 a b c +} {a b c} +test linsert-1.11 {linsert command} { + linsert {} 2 {} +} {{}} +test linsert-1.12 {linsert command} { + linsert {a b "c c" d e} 3 1 +} {a b {c c} 1 d e} +test linsert-1.13 {linsert command} { + linsert { a b c d} 0 1 2 +} {1 2 a b c d} +test linsert-1.14 {linsert command} { + linsert {a b c {d e f}} 4 1 2 +} {a b c {d e f} 1 2} +test linsert-1.15 {linsert command} { + linsert {a b c \{\ abc} 4 q r +} {a b c \{\ q r abc} +test linsert-1.16 {linsert command} { + linsert {a b c \{ abc} 4 q r +} {a b c \{ q r abc} +test linsert-1.17 {linsert command} { + linsert {a b c} end q r +} {a b c q r} +test linsert-1.18 {linsert command} { + linsert {a} end q r +} {a q r} +test linsert-1.19 {linsert command} { + linsert {} end q r +} {q r} + +test linsert-2.1 {linsert errors} { + list [catch linsert msg] $msg +} {1 {wrong # args: should be "linsert list index element ?element ...?"}} +test linsert-2.2 {linsert errors} { + list [catch {linsert a b} msg] $msg +} {1 {wrong # args: should be "linsert list index element ?element ...?"}} +test linsert-2.3 {linsert errors} { + list [catch {linsert a 12x 2} msg] $msg +} {1 {bad index "12x": must be integer or "end"}} +test linsert-2.4 {linsert errors} { + list [catch {linsert \{ 12 2} msg] $msg +} {1 {unmatched open brace in list}} + +test linsert-3.1 {linsert won't modify shared argument objects} { + proc p {} { + linsert "a b c" 1 "x y" + return "a b c" + } + p +} "a b c" +test linsert-3.2 {linsert won't modify shared argument objects} { + catch {unset lis} + set lis [format "a \"%s\" c" "b"] + linsert $lis 0 [string length $lis] +} "7 a b c" + +catch {unset lis} +catch {rename p ""} diff --git a/tests/list.test b/tests/list.test new file mode 100644 index 0000000..6c59f20 --- /dev/null +++ b/tests/list.test @@ -0,0 +1,107 @@ +# Commands covered: list +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) list.test 1.22 97/06/23 18:19:17 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# First, a bunch of individual tests + +test list-1.1 {basic tests} {list a b c} {a b c} +test list-1.2 {basic tests} {list {a b} c} {{a b} c} +test list-1.3 {basic tests} {list \{a b c} {\{a b c} +test list-1.4 {basic tests} "list a{}} b{} c}" "a\\{\\}\\} b{} c\\}" +test list-1.5 {basic tests} {list a\[ b\] } "{a\[} b\\]" +test list-1.6 {basic tests} {list c\ d\t } "{c } {d\t}" +test list-1.7 {basic tests} {list e\n f\$ } "{e\n} {f\$}" +test list-1.8 {basic tests} {list g\; h\\} {{g;} h\\} +test list-1.9 {basic tests} "list a\\\[} b\\\]} " "a\\\[\\\} b\\\]\\\}" +test list-1.10 {basic tests} "list c\\\} d\\t} " "c\\} d\\t\\}" +test list-1.11 {basic tests} "list e\\n} f\\$} " "e\\n\\} f\\$\\}" +test list-1.12 {basic tests} "list g\\;} h\\\\} " "g\\;\\} {h\\}}" +test list-1.13 {basic tests} {list a {{}} b} {a {{}} b} +test list-1.14 {basic tests} {list a b xy\\} "a b xy\\\\" +test list-1.15 {basic tests} "list a b\} e\\" "a b\\} e\\\\" +test list-1.16 {basic tests} "list a b\}\\\$ e\\\$\\" "a b\\}\\\$ e\\\$\\\\" +test list-1.17 {basic tests} {list a\f \{\f} "{a\f} \\\{\\f" +test list-1.18 {basic tests} {list a\r \{\r} "{a\r} \\\{\\r" +test list-1.19 {basic tests} {list a\v \{\v} "{a\v} \\\{\\v" +test list-1.20 {basic tests} {list \"\}\{} "\\\"\\}\\{" +test list-1.21 {basic tests} {list a b c\\\nd} "a b c\\\\\\nd" +test list-1.22 {basic tests} {list "{ab}\\"} \\{ab\\}\\\\ +test list-1.23 {basic tests} {list \{} "\\{" +test list-1.24 {basic tests} {list} {} + +# For the next round of tests create a list and then pick it apart +# with "index" to make sure that we get back exactly what went in. + +test list-2.1 {placeholder} { +} {} +set num 1 +proc lcheck {a b c} { + global num d + set d [list $a $b $c] +; test list-2.$num {what goes in must come out} {lindex $d 0} $a + set num [expr $num+1] +; test list-2.$num {what goes in must come out} {lindex $d 1} $b + set num [expr $num+1] +; test list-2.$num {what goes in must come out} {lindex $d 2} $c + set num [expr $num+1] +} +lcheck a b c +lcheck "a b" c\td e\nf +lcheck {{a b}} {} { } +lcheck \$ \$ab ab\$ +lcheck \; \;ab ab\; +lcheck \[ \[ab ab\[ +lcheck \\ \\ab ab\\ +lcheck {"} {"ab} {ab"} +lcheck {a b} { ab} {ab } +lcheck a{ a{b \{ab +lcheck a} a}b }ab +lcheck a\\} {a \}b} {a \{c} +lcheck xyz \\ 1\\\n2 +lcheck "{ab}\\" "{ab}xy" abc + +concat {} + +# Check that tclListObj.c's SetListFromAny handles possible overlarge +# string rep lengths in the source object. + +proc slowsort list { + set result {} + set last [expr [llength $list] - 1] + while {$last > 0} { + set minIndex [expr [llength $list] - 1] + set min [lindex $list $last] + set i [expr $minIndex-1] + while {$i >= 0} { + if {[string compare [lindex $list $i] $min] < 0} { + set minIndex $i + set min [lindex $list $i] + } + set i [expr $i-1] + } + set result [concat $result [list $min]] + if {$minIndex == 0} { + set list [lrange $list 1 end] + } else { + set list [concat [lrange $list 0 [expr $minIndex-1]] \ + [lrange $list [expr $minIndex+1] end]] + } + set last [expr $last-1] + } + return [concat $result $list] +} +test list-3.1 {SetListFromAny and lrange/concat results} { + slowsort {fred julie alex carol bill annie} +} {alex annie bill carol fred julie} diff --git a/tests/listObj.test b/tests/listObj.test new file mode 100644 index 0000000..00eb7c6 --- /dev/null +++ b/tests/listObj.test @@ -0,0 +1,176 @@ +# Functionality covered: operation of the procedures in tclListObj.c that +# implement the Tcl type manager for the list object type. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) listObj.test 1.9 97/06/10 15:28:11 + +if {[info commands testobj] == {}} { + puts "This application hasn't been compiled with the \"testobj\"" + puts "command, so I can't test the Tcl type and object support." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {unset x} +test listobj-1.1 {Tcl_GetListObjType} { + set t [testobj types] + set first [string first "list" $t] + set result [expr {$first != -1}] +} {1} + +test listobj-2.1 {Tcl_ListObjForObjArray, use in lappend} { + catch {unset x} + list [lappend x 1 abc def] [lappend x 1 ghi jkl] $x +} {{1 abc def} {1 abc def 1 ghi jkl} {1 abc def 1 ghi jkl}} +test listobj-2.2 {Tcl_ListObjForObjArray, use in ObjInterpProc} { + proc return_args {args} { + return $args + } + list [return_args] [return_args x] [return_args x y] +} {{} x {x y}} + +test listobj-3.1 {Tcl_ListObjAppend, list conversion} { + catch {unset x} + list [lappend x 1 2 abc "long string"] $x +} {{1 2 abc {long string}} {1 2 abc {long string}}} +test listobj-3.2 {Tcl_ListObjAppend, list conversion} { + set x "" + list [lappend x first second] [lappend x third fourth] $x +} {{first second} {first second third fourth} {first second third fourth}} +test listobj-3.3 {Tcl_ListObjAppend, list conversion} { + set x "abc def" + list [lappend x first second] $x +} {{abc def first second} {abc def first second}} +test listobj-3.4 {Tcl_ListObjAppend, error in conversion} { + set x " \{" + list [catch {lappend x abc def} msg] $msg +} {1 {unmatched open brace in list}} +test listobj-3.5 {Tcl_ListObjAppend, force internal rep array to grow} { + set x "" + list [lappend x 1 1] [lappend x 2 2] [lappend x 3 3] [lappend x 4 4] \ + [lappend x 5 5] [lappend x 6 6] [lappend x 7 7] [lappend x 8 8] $x +} {{1 1} {1 1 2 2} {1 1 2 2 3 3} {1 1 2 2 3 3 4 4} {1 1 2 2 3 3 4 4 5 5} {1 1 2 2 3 3 4 4 5 5 6 6} {1 1 2 2 3 3 4 4 5 5 6 6 7 7} {1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8} {1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8}} + +test listobj-4.1 {Tcl_ListObjAppendElement, list conversion} { + catch {unset x} + list [lappend x 1] $x +} {1 1} +test listobj-4.2 {Tcl_ListObjAppendElement, list conversion} { + set x "" + list [lappend x first] [lappend x second] $x +} {first {first second} {first second}} +test listobj-4.3 {Tcl_ListObjAppendElement, list conversion} { + set x "abc def" + list [lappend x first] $x +} {{abc def first} {abc def first}} +test listobj-4.4 {Tcl_ListObjAppendElement, error in conversion} { + set x " \{" + list [catch {lappend x abc} msg] $msg +} {1 {unmatched open brace in list}} +test listobj-4.5 {Tcl_ListObjAppendElement, force internal rep array to grow} { + set x "" + list [lappend x 1] [lappend x 2] [lappend x 3] [lappend x 4] \ + [lappend x 5] [lappend x 6] [lappend x 7] [lappend x 8] $x +} {1 {1 2} {1 2 3} {1 2 3 4} {1 2 3 4 5} {1 2 3 4 5 6} {1 2 3 4 5 6 7} {1 2 3 4 5 6 7 8} {1 2 3 4 5 6 7 8}} + +test listobj-5.1 {Tcl_ListObjIndex, basic tests} { + lindex {a b c} 0 +} a +test listobj-5.2 {Tcl_ListObjIndex, basic tests} { + lindex a 0 +} a +test listobj-5.3 {Tcl_ListObjIndex, basic tests} { + lindex {a {b c d} x} 1 +} {b c d} +test listobj-5.4 {Tcl_ListObjIndex, basic tests} { + lindex {a b c} 3 +} {} +test listobj-5.5 {Tcl_ListObjIndex, basic tests} { + lindex {a b c} 100 +} {} +test listobj-5.6 {Tcl_ListObjIndex, basic tests} { + lindex a 100 +} {} +test listobj-5.7 {Tcl_ListObjIndex, basic tests} { + lindex {} -1 +} {} +test listobj-5.8 {Tcl_ListObjIndex, error in conversion} { + set x " \{" + list [catch {lindex $x 0} msg] $msg +} {1 {unmatched open brace in list}} + +test listobj-6.1 {Tcl_ListObjLength} { + llength {a b c d} +} 4 +test listobj-6.2 {Tcl_ListObjLength} { + llength {a b c {a b {c d}} d} +} 5 +test listobj-6.3 {Tcl_ListObjLength} { + llength {} +} 0 +test listobj-6.4 {Tcl_ListObjLength, convert from non-list} { + llength 123 +} 1 +test listobj-6.5 {Tcl_ListObjLength, error converting from non-list} { + list [catch {llength "a b c \{"} msg] $msg +} {1 {unmatched open brace in list}} +test listobj-6.6 {Tcl_ListObjLength, error converting from non-list} { + list [catch {llength "a {b}c"} msg] $msg +} {1 {list element in braces followed by "c" instead of space}} + +test listobj-7.1 {Tcl_ListObjReplace, conversion from non-list} { + lreplace 123 0 0 x +} {x} +test listobj-7.2 {Tcl_ListObjReplace, error converting from non-list} { + list [catch {lreplace "a b c \{" 1 1 x} msg] $msg +} {1 {unmatched open brace in list}} +test listobj-7.3 {Tcl_ListObjReplace, error converting from non-list} { + list [catch {lreplace "a {b}c" 1 2 x} msg] $msg +} {1 {list element in braces followed by "c" instead of space}} +test listobj-7.4 {Tcl_ListObjReplace, negative first element index} { + lreplace {1 2 3 4 5} -1 1 a +} {a 3 4 5} +test listobj-7.5 {Tcl_ListObjReplace, last element index >= num elems} { + lreplace {1 2 3 4 5} 3 7 a b c +} {1 2 3 a b c} +test listobj-7.6 {Tcl_ListObjReplace, first element index > last index} { + lreplace {1 2 3 4 5} 3 1 a b c +} {1 2 3 a b c 4 5} +test listobj-7.7 {Tcl_ListObjReplace, no new elements} { + lreplace {1 2 3 4 5} 1 1 +} {1 3 4 5} +test listobj-7.8 {Tcl_ListObjReplace, shrink array in place} { + lreplace {1 2 3 4 5 6 7} 4 5 +} {1 2 3 4 7} +test listobj-7.9 {Tcl_ListObjReplace, grow array in place} { + lreplace {1 2 3 4 5 6 7} 1 3 a b c d e +} {1 a b c d e 5 6 7} +test listobj-7.10 {Tcl_ListObjReplace, replace tail of array} { + lreplace {1 2 3 4 5 6 7} 3 6 a +} {1 2 3 a} +test listobj-7.11 {Tcl_ListObjReplace, must grow internal array} { + lreplace {1 2 3 4 5} 2 3 a b c d e f g h i j k l +} {1 2 a b c d e f g h i j k l 5} +test listobj-7.12 {Tcl_ListObjReplace, grow array, insert at start} { + lreplace {1 2 3 4 5} -1 -1 a b c d e f g h i j k l +} {a b c d e f g h i j k l 1 2 3 4 5} +test listobj-7.13 {Tcl_ListObjReplace, grow array, insert at end} { + lreplace {1 2 3 4 5} 4 1 a b c d e f g h i j k l +} {1 2 3 4 a b c d e f g h i j k l 5} + +test listobj-8.1 {SetListFromAny} { + lindex {0 foo\x00help 2} 1 +} "foo\x00help" + +test listobj-9.1 {UpdateStringOfList} { + string length [list foo\x00help] +} 8 diff --git a/tests/llength.test b/tests/llength.test new file mode 100644 index 0000000..badfd17 --- /dev/null +++ b/tests/llength.test @@ -0,0 +1,35 @@ +# Commands covered: llength +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) llength.test 1.4 96/02/16 08:56:11 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test llength-1.1 {length of list} { + llength {a b c d} +} 4 +test llength-1.2 {length of list} { + llength {a b c {a b {c d}} d} +} 5 +test llength-1.3 {length of list} { + llength {} +} 0 + +test llength-2.1 {error conditions} { + list [catch {llength} msg] $msg +} {1 {wrong # args: should be "llength list"}} +test llength-2.2 {error conditions} { + list [catch {llength 123 2} msg] $msg +} {1 {wrong # args: should be "llength list"}} +test llength-2.3 {error conditions} { + list [catch {llength "a b c \{"} msg] $msg +} {1 {unmatched open brace in list}} diff --git a/tests/load.test b/tests/load.test new file mode 100644 index 0000000..5c33677 --- /dev/null +++ b/tests/load.test @@ -0,0 +1,160 @@ +# Commands covered: load +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1995 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) load.test 1.19 96/11/30 16:05:18 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Figure out what extension is used for shared libraries on this +# platform. + +if {$tcl_platform(platform) == "macintosh"} { + puts "can't run dynamic library tests on macintosh machines" + return +} +set ext [info sharedlibextension] +set testDir [file join [file dirname [info nameofexecutable]] dltest] +if ![file readable [file join $testDir pkga$ext]] { + puts "libraries in $testDir haven't been compiled: skipping tests" + return +} + +if [string match *pkga* [set alreadyLoaded [info loaded {}]]] { + puts "load tests have already been run once: skipping (can't rerun)" + return +} + +set alreadyTotalLoaded [info loaded] + +test load-1.1 {basic errors} { + list [catch {load} msg] $msg +} {1 {wrong # args: should be "load fileName ?packageName? ?interp?"}} +test load-1.2 {basic errors} { + list [catch {load a b c d} msg] $msg +} {1 {wrong # args: should be "load fileName ?packageName? ?interp?"}} +test load-1.3 {basic errors} { + list [catch {load a b foobar} msg] $msg +} {1 {couldn't find slave interpreter named "foobar"}} +test load-1.4 {basic errors} { + list [catch {load {}} msg] $msg +} {1 {must specify either file name or package name}} +test load-1.5 {basic errors} { + list [catch {load {} {}} msg] $msg +} {1 {must specify either file name or package name}} +test load-1.6 {basic errors} { + list [catch {load {} Unknown} msg] $msg +} {1 {package "Unknown" isn't loaded statically}} + +test load-2.1 {basic loading, with guess for package name} { + load [file join $testDir pkga$ext] + list [pkga_eq abc def] [info commands pkga_*] +} {0 {pkga_eq pkga_quote}} +interp create -safe child +test load-2.2 {loading into a safe interpreter, with package name conversion} { + load [file join $testDir pkgb$ext] pKgB child + list [child eval pkgb_sub 44 13] [catch {child eval pkgb_unsafe} msg] $msg \ + [catch {pkgb_sub 12 10} msg2] $msg2 +} {31 1 {invalid command name "pkgb_unsafe"} 1 {invalid command name "pkgb_sub"}} +test load-2.3 {loading with no _Init procedure} { + list [catch {load [file join $testDir pkgc$ext] foo} msg] $msg +} {1 {couldn't find procedure Foo_Init}} +test load-2.4 {loading with no _SafeInit procedure} { + list [catch {load [file join $testDir pkga$ext] {} child} msg] $msg +} {1 {can't use package in a safe interpreter: no Pkga_SafeInit procedure}} + +test load-3.1 {error in _Init procedure, same interpreter} { + list [catch {load [file join $testDir pkge$ext] pkge} msg] $msg $errorInfo $errorCode +} {1 {couldn't open "non_existent": no such file or directory} {couldn't open "non_existent": no such file or directory + while executing +"open non_existent" + invoked from within +"load [file join $testDir pkge$ext] pkge"} {POSIX ENOENT {no such file or directory}}} +test load-3.2 {error in _Init procedure, slave interpreter} { + catch {interp delete x} + interp create x + set errorCode foo + set errorInfo bar + set result [list [catch {load [file join $testDir pkge$ext] pkge x} msg] \ + $msg $errorInfo $errorCode] + interp delete x + set result +} {1 {couldn't open "non_existent": no such file or directory} {couldn't open "non_existent": no such file or directory + while executing +"open non_existent" + invoked from within +"load [file join $testDir pkge$ext] pkge x"} {POSIX ENOENT {no such file or directory}}} + +test load-4.1 {reloading package into same interpreter} { + list [catch {load [file join $testDir pkga$ext] pkga} msg] $msg +} {0 {}} +test load-4.2 {reloading package into same interpreter} { + list [catch {load [file join $testDir pkga$ext] pkgb} msg] $msg +} "1 {file \"[file join $testDir pkga$ext\"] is already loaded for package \"Pkga\"}" + +test load-5.1 {file name not specified and no static package: pick default} { + catch {interp delete x} + interp create x + load [file join $testDir pkga$ext] pkga + load {} pkga x + set result [info loaded x] + interp delete x + set result +} "{[file join $testDir pkga$ext] Pkga}" + +# On some platforms, like SunOS 4.1.3, these tests can't be run because +# they cause the process to exit. + +test load-6.1 {errors loading file} {nonPortable} { + catch {load foo foo} +} {1} + +if {[info command teststaticpkg] != ""} { + test load-7.1 {Tcl_StaticPackage procedure} { + set x "not loaded" + teststaticpkg Test 1 0 + load {} Test + load {} Test child + list [set x] [child eval set x] + } {loaded loaded} + test load-7.2 {Tcl_StaticPackage procedure} { + set x "not loaded" + teststaticpkg Another 0 0 + load {} Another + child eval {set x "not loaded"} + list [catch {load {} Another child} msg] $msg [child eval set x] [set x] + } {1 {can't use package in a safe interpreter: no Another_SafeInit procedure} {not loaded} loaded} + test load-7.3 {Tcl_StaticPackage procedure} { + set x "not loaded" + teststaticpkg More 0 1 + load {} More + set x + } {not loaded} + test load-7.4 {Tcl_StaticPackage procedure, redundant calls} { + teststaticpkg Double 0 1 + teststaticpkg Double 0 1 + info loaded + } "{{} Double} {{} More} {{} Another} {{} Test} {[file join $testDir pkge$ext] Pkge} {[file join $testDir pkgb$ext] Pkgb} {[file join $testDir pkga$ext] Pkga} $alreadyTotalLoaded" + + test load-8.1 {TclGetLoadedPackages procedure} { + info loaded + } "{{} Double} {{} More} {{} Another} {{} Test} {[file join $testDir pkge$ext] Pkge} {[file join $testDir pkgb$ext] Pkgb} {[file join $testDir pkga$ext] Pkga} $alreadyTotalLoaded" + test load-8.2 {TclGetLoadedPackages procedure} { + list [catch {info loaded gorp} msg] $msg + } {1 {couldn't find slave interpreter named "gorp"}} + test load-8.3 {TclGetLoadedPackages procedure} { + list [info loaded {}] [info loaded child] + } "{{{} Double} {{} More} {{} Another} {{} Test} {[file join $testDir pkga$ext] Pkga} $alreadyLoaded} {{{} Test} {[file join $testDir pkgb$ext] Pkgb}}" + test load-8.4 {TclGetLoadedPackages procedure} { + load [file join $testDir pkgb$ext] pkgb + list [info loaded {}] [lsort [info commands pkgb_*]] + } "{{[file join $testDir pkgb$ext] Pkgb} {{} Double} {{} More} {{} Another} {{} Test} {[file join $testDir pkga$ext] Pkga} $alreadyLoaded} {pkgb_sub pkgb_unsafe}" + interp delete child +} diff --git a/tests/lrange.test b/tests/lrange.test new file mode 100644 index 0000000..32fbbaa --- /dev/null +++ b/tests/lrange.test @@ -0,0 +1,83 @@ +# Commands covered: lrange +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) lrange.test 1.12 97/06/23 18:19:25 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test lrange-1.1 {range of list elements} { + lrange {a b c d} 1 2 +} {b c} +test lrange-1.2 {range of list elements} { + lrange {a {bcd e {f g {}}} l14 l15 d} 1 1 +} {{bcd e {f g {}}}} +test lrange-1.3 {range of list elements} { + lrange {a {bcd e {f g {}}} l14 l15 d} 3 end +} {l15 d} +test lrange-1.4 {range of list elements} { + lrange {a {bcd e {f g {}}} l14 l15 d} 4 10000 +} {d} +test lrange-1.5 {range of list elements} { + lrange {a {bcd e {f g {}}} l14 l15 d} 4 3 +} {} +test lrange-1.6 {range of list elements} { + lrange {a {bcd e {f g {}}} l14 l15 d} 10 11 +} {} +test lrange-1.7 {range of list elements} { + lrange {a b c d e} -1 2 +} {a b c} +test lrange-1.8 {range of list elements} { + lrange {a b c d e} -2 -1 +} {} +test lrange-1.9 {range of list elements} { + lrange {a b c d e} -2 e +} {a b c d e} +test lrange-1.10 {range of list elements} { + lrange "a b\{c d" 1 2 +} "b\\{c d" +test lrange-1.11 {range of list elements} { + lrange "a b c d" end end +} d +test lrange-1.12 {range of list elements} { + lrange "a b c d" end 100000 +} d +test lrange-1.13 {range of list elements} { + lrange "a b c d" e 3 +} d +test lrange-1.14 {range of list elements} { + lrange "a b c d" end 2 +} {} +test lrange-1.15 {range of list elements} { + concat \"[lrange {a b \{\ } 0 2]" +} {"a b \{\ "} +test lrange-1.16 {list element quoting} { + lrange {[append a .b]} 0 end +} {{[append} a .b\]} + +test lrange-2.1 {error conditions} { + list [catch {lrange a b} msg] $msg +} {1 {wrong # args: should be "lrange list first last"}} +test lrange-2.2 {error conditions} { + list [catch {lrange a b 6 7} msg] $msg +} {1 {wrong # args: should be "lrange list first last"}} +test lrange-2.3 {error conditions} { + list [catch {lrange a b 6} msg] $msg +} {1 {bad index "b": must be integer or "end"}} +test lrange-2.4 {error conditions} { + list [catch {lrange a 0 enigma} msg] $msg +} {1 {bad index "enigma": must be integer or "end"}} +test lrange-2.5 {error conditions} { + list [catch {lrange "a \{b c" 3 4} msg] $msg +} {1 {unmatched open brace in list}} +test lrange-2.6 {error conditions} { + list [catch {lrange "a b c \{ d e" 1 4} msg] $msg +} {1 {unmatched open brace in list}} diff --git a/tests/lreplace.test b/tests/lreplace.test new file mode 100644 index 0000000..44e8ee1 --- /dev/null +++ b/tests/lreplace.test @@ -0,0 +1,131 @@ +# Commands covered: lreplace +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) lreplace.test 1.16 97/10/29 16:32:39 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test lreplace-1.1 {lreplace command} { + lreplace {1 2 3 4 5} 0 0 a +} {a 2 3 4 5} +test lreplace-1.2 {lreplace command} { + lreplace {1 2 3 4 5} 1 1 a +} {1 a 3 4 5} +test lreplace-1.3 {lreplace command} { + lreplace {1 2 3 4 5} 2 2 a +} {1 2 a 4 5} +test lreplace-1.4 {lreplace command} { + lreplace {1 2 3 4 5} 3 3 a +} {1 2 3 a 5} +test lreplace-1.5 {lreplace command} { + lreplace {1 2 3 4 5} 4 4 a +} {1 2 3 4 a} +test lreplace-1.6 {lreplace command} { + lreplace {1 2 3 4 5} 4 5 a +} {1 2 3 4 a} +test lreplace-1.7 {lreplace command} { + lreplace {1 2 3 4 5} -1 -1 a +} {a 1 2 3 4 5} +test lreplace-1.8 {lreplace command} { + lreplace {1 2 3 4 5} 2 end a b c d +} {1 2 a b c d} +test lreplace-1.9 {lreplace command} { + lreplace {1 2 3 4 5} 0 3 +} {5} +test lreplace-1.10 {lreplace command} { + lreplace {1 2 3 4 5} 0 4 +} {} +test lreplace-1.11 {lreplace command} { + lreplace {1 2 3 4 5} 0 1 +} {3 4 5} +test lreplace-1.12 {lreplace command} { + lreplace {1 2 3 4 5} 2 3 +} {1 2 5} +test lreplace-1.13 {lreplace command} { + lreplace {1 2 3 4 5} 3 end +} {1 2 3} +test lreplace-1.14 {lreplace command} { + lreplace {1 2 3 4 5} -1 4 a b c +} {a b c} +test lreplace-1.15 {lreplace command} { + lreplace {a b "c c" d e f} 3 3 +} {a b {c c} e f} +test lreplace-1.16 {lreplace command} { + lreplace { 1 2 3 4 5} 0 0 a +} {a 2 3 4 5} +test lreplace-1.17 {lreplace command} { + lreplace {1 2 3 4 "5 6"} 4 4 a +} {1 2 3 4 a} +test lreplace-1.18 {lreplace command} { + lreplace {1 2 3 4 {5 6}} 4 4 a +} {1 2 3 4 a} +test lreplace-1.19 {lreplace command} { + lreplace {1 2 3 4} 2 end x y z +} {1 2 x y z} +test lreplace-1.20 {lreplace command} { + lreplace {1 2 3 4} end end a +} {1 2 3 a} +test lreplace-1.21 {lreplace command} { + lreplace {1 2 3 4} end 3 a +} {1 2 3 a} +test lreplace-1.22 {lreplace command} { + lreplace {1 2 3 4} end end +} {1 2 3} +test lreplace-1.23 {lreplace command} { + lreplace {1 2 3 4} 2 -1 xy +} {1 2 xy 3 4} +test lreplace-1.24 {lreplace command} { + lreplace {1 2 3 4} end -1 z +} {1 2 3 z 4} +test lreplace-1.25 {lreplace command} { + concat \"[lreplace {\}\ hello} end end]\" +} {"\}\ "} +test lreplace-1.26 {lreplace command} { + catch {unset foo} + set foo {a b} + list [set foo [lreplace $foo end end]] \ + [set foo [lreplace $foo end end]] \ + [set foo [lreplace $foo end end]] +} {a {} {}} + + +test lreplace-2.1 {lreplace errors} { + list [catch lreplace msg] $msg +} {1 {wrong # args: should be "lreplace list first last ?element element ...?"}} +test lreplace-2.2 {lreplace errors} { + list [catch {lreplace a b} msg] $msg +} {1 {wrong # args: should be "lreplace list first last ?element element ...?"}} +test lreplace-2.3 {lreplace errors} { + list [catch {lreplace x a 10} msg] $msg +} {1 {bad index "a": must be integer or "end"}} +test lreplace-2.4 {lreplace errors} { + list [catch {lreplace x 10 x} msg] $msg +} {1 {bad index "x": must be integer or "end"}} +test lreplace-2.5 {lreplace errors} { + list [catch {lreplace x 10 1x} msg] $msg +} {1 {bad index "1x": must be integer or "end"}} +test lreplace-2.6 {lreplace errors} { + list [catch {lreplace x 3 2} msg] $msg +} {1 {list doesn't contain element 3}} +test lreplace-2.7 {lreplace errors} { + list [catch {lreplace x 1 1} msg] $msg +} {1 {list doesn't contain element 1}} + +test lreplace-3.1 {lreplace won't modify shared argument objects} { + proc p {} { + lreplace "a b c" 1 1 "x y" + return "a b c" + } + p +} "a b c" + +catch {unset foo} diff --git a/tests/lsearch.test b/tests/lsearch.test new file mode 100644 index 0000000..4eda84b --- /dev/null +++ b/tests/lsearch.test @@ -0,0 +1,86 @@ +# Commands covered: lsearch +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) lsearch.test 1.7 97/04/30 13:23:53 + +if {[string compare test [info procs test]] == 1} then {source defs} + +set x {abcd bbcd 123 234 345} +test lsearch-1.1 {lsearch command} { + lsearch $x 123 +} 2 +test lsearch-1.2 {lsearch command} { + lsearch $x 3456 +} -1 +test lsearch-1.3 {lsearch command} { + lsearch $x *5 +} 4 +test lsearch-1.4 {lsearch command} { + lsearch $x *bc* +} 0 + +test lsearch-2.1 {search modes} { + lsearch -exact {xyz bbcc *bc*} *bc* +} 2 +test lsearch-2.2 {search modes} { + lsearch -exact {b.x ^bc xy bcx} ^bc +} 1 +test lsearch-2.3 {search modes} { + lsearch -exact {foo bar cat} ba +} -1 +test lsearch-2.4 {search modes} { + lsearch -exact {foo bar cat} bart +} -1 +test lsearch-2.5 {search modes} { + lsearch -exact {foo bar cat} bar +} 1 +test lsearch-2.6 {search modes} { + list [catch {lsearch -regexp {xyz bbcc *bc*} *bc*} msg] $msg +} {1 {couldn't compile regular expression pattern: ?+* follows nothing}} +test lsearch-2.7 {search modes} { + lsearch -regexp {b.x ^bc xy bcx} ^bc +} 3 +test lsearch-2.8 {search modes} { + lsearch -glob {xyz bbcc *bc*} *bc* +} 1 +test lsearch-2.9 {search modes} { + lsearch -glob {b.x ^bc xy bcx} ^bc +} 1 +test lsearch-2.10 {search modes} { + list [catch {lsearch -glib {b.x bx xy bcx} b.x} msg] $msg +} {1 {bad search mode "-glib": must be -exact, -glob, or -regexp}} + +test lsearch-3.1 {lsearch errors} { + list [catch lsearch msg] $msg +} {1 {wrong # args: should be "lsearch ?mode? list pattern"}} +test lsearch-3.2 {lsearch errors} { + list [catch {lsearch a} msg] $msg +} {1 {wrong # args: should be "lsearch ?mode? list pattern"}} +test lsearch-3.3 {lsearch errors} { + list [catch {lsearch a b c} msg] $msg +} {1 {bad search mode "a": must be -exact, -glob, or -regexp}} +test lsearch-3.4 {lsearch errors} { + list [catch {lsearch a b c d} msg] $msg +} {1 {wrong # args: should be "lsearch ?mode? list pattern"}} +test lsearch-3.5 {lsearch errors} { + list [catch {lsearch "\{" b} msg] $msg +} {1 {unmatched open brace in list}} + +test lsearch-4.1 {binary data} { + lsearch -exact [list foo one\000two bar] bar +} 2 +test lsearch-4.2 {binary data} { + set x one + append x \x00 + append x two + lsearch -exact [list foo one\000two bar] $x +} 1 diff --git a/tests/macFCmd.test b/tests/macFCmd.test new file mode 100644 index 0000000..a06004c --- /dev/null +++ b/tests/macFCmd.test @@ -0,0 +1,168 @@ +# This file tests the tclfCmd.c file. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) macFCmd.test 1.3 97/06/23 18:24:10 +# + +if {$tcl_platform(platform) != "macintosh"} { + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {file delete -force foo.dir} +file mkdir foo.dir +if {[catch {file attributes foo.dir -readonly 1}]} { + set testConfig(fileSharing) 0 + set testConfig(notFileSharing) 1 +} else { + set testConfig(fileSharing) 1 + set testConfig(notFileSharing) 0 +} +file delete -force foo.dir + +test macFCmd-1.1 {GetFileFinderAttributes - no file} { + catch {file delete -force foo.file} + list [catch {file attributes foo.file -creator} msg] $msg +} {1 {couldn't get attributes for file ":foo.file": no such file or directory}} +test macFCmd-1.2 {GetFileFinderAttributes - creator} { + catch {file delete -force foo.file} + catch {close [open foo.file w]} + list [catch {file attributes foo.file -creator} msg] $msg [file delete -force foo.file] +} {0 {MPW } {}} +test macFCmd-1.3 {GetFileFinderAttributes - type} { + catch {file delete -force foo.file} + catch {close [open foo.file w]} + list [catch {file attributes foo.file -type} msg] $msg [file delete -force foo.file] +} {0 TEXT {}} +test macFCmd-1.4 {GetFileFinderAttributes - not hidden} { + catch {file delete -force foo.file} + catch {close [open foo.file w]} + list [catch {file attributes foo.file -hidden} msg] $msg [file delete -force foo.file] +} {0 0 {}} +test macFCmd-1.5 {GetFileFinderAttributes - hidden} { + catch {file delete -force foo.file} + catch {close [open foo.file w]} + file attributes foo.file -hidden 1 + list [catch {file attributes foo.file -hidden} msg] $msg [file delete -force foo.file] +} {0 1 {}} +test macFCmd-1.6 {GetFileFinderAttributes - folder creator} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -creator} msg] $msg [file delete -force foo.dir] +} {0 Fldr {}} +test macFCmd-1.7 {GetFileFinderAttributes - folder type} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -type} msg] $msg [file delete -force foo.dir] +} {0 Fldr {}} +test macFCmd-1.8 {GetFileFinderAttributes - folder hidden} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -hidden} msg] $msg [file delete -force foo.dir] +} {0 0 {}} + +test macFCmd-2.1 {GetFileReadOnly - bad file} { + catch {file delete -force foo.file} + list [catch {file attributes foo.file -readonly} msg] $msg +} {1 {couldn't get attributes for file ":foo.file": no such file or directory}} +test macFCmd-2.2 {GetFileReadOnly - file not read only} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file -readonly} msg] $msg [file delete -force foo.file] +} {0 0 {}} +test macFCmd-2.3 {GetFileReadOnly - file read only} { + catch {file delete -force foo.file} + close [open foo.file w] + file attributes foo.file -readonly 1 + list [catch {file attributes foo.file -readonly} msg] $msg [file delete -force foo.file] +} {0 1 {}} +test macFCmd-2.4 {GetFileReadOnly - directory not read only} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -readonly} msg] $msg [file delete -force foo.dir] +} {0 0 {}} +test macFCmd-2.5 {GetFileReadOnly - directory read only} {fileSharing} { + catch {file delete -force foo.dir} + file mkdir foo.dir + file attributes foo.dir -readonly 1 + list [catch {file attributes foo.dir -readonly} msg] $msg [file delete -force foo.dir] +} {0 1 {}} + +test macFCmd-3.1 {SetFileFinderAttributes - bad file} { + catch {file delete -force foo.file} + list [catch {file attributes foo.file -creator FOOO} msg] $msg +} {1 {couldn't set attributes for file ":foo.file": no such file or directory}} +test macFCmd-3.2 {SetFileFinderAttributes - creator} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file -creator FOOO} msg] $msg [file attributes foo.file -creator] [file delete -force foo.file] +} {0 {} FOOO {}} +test macFCmd-3.3 {SetFileFinderAttributes - bad creator} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file -creator 0} msg] $msg [file delete -force foo.file] +} {1 {expected Macintosh OS type but got "0"} {}} +test macFCmd-3.4 {SetFileFinderAttributes - hidden} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file -hidden 1} msg] $msg [file attributes foo.file -hidden] [file delete -force foo.file] +} {0 {} 1 {}} +test macFCmd-3.5 {SetFileFinderAttributes - type} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file -type FOOO} msg] $msg [file attributes foo.file -type] [file delete -force foo.file] +} {0 {} FOOO {}} +test macFCmd-3.6 {SetFileFinderAttributes - bad type} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file -type 0} msg] $msg [file delete -force foo.file] +} {1 {expected Macintosh OS type but got "0"} {}} +test macFCmd-3.7 {SetFileFinderAttributes - directory} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -creator FOOO} msg] $msg [file delete -force foo.dir] +} {1 {cannot set -creator: ":foo.dir" is a directory} {}} + +test macFCmd-4.1 {SetFileReadOnly - bad file} { + catch {file delete -force foo.file} + list [catch {file attributes foo.file -readonly 1} msg] $msg +} {1 {couldn't set attributes for file ":foo.file": no such file or directory}} +test macFCmd-4.2 {SetFileReadOnly - file not readonly} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file -readonly 0} msg] $msg [file attributes foo.file -readonly] [file delete -force foo.file] +} {0 {} 0 {}} +test macFCmd-4.3 {SetFileReadOnly - file readonly} { + catch {file delete -force foo.file} + close [open foo.file w] + list [catch {file attributes foo.file -readonly 1} msg] $msg [file attributes foo.file -readonly] [file delete -force foo.file] +} {0 {} 1 {}} +test macFCmd-4.4 {SetFileReadOnly - directory not readonly} {fileSharing} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -readonly 0} msg] $msg [file attributes foo.dir -readonly] [file delete -force foo.dir] +} {0 {} 0 {}} +test macFCmd-4.5 {SetFileReadOnly - directory not readonly} {notFileSharing} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -readonly 0} msg] $msg [file delete -force foo.dir] +} {1 {cannot set a directory to read-only when File Sharing is turned off} {}} +test macFCmd-4.6 {SetFileReadOnly - directory readonly} {fileSharing} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -readonly 1} msg] $msg [file attributes foo.dir -readonly] [file delete -force foo.dir] +} {0 {} 1 {}} +test macFCmd-4.7 {SetFileReadOnly - directory readonly} {notFileSharing} { + catch {file delete -force foo.dir} + file mkdir foo.dir + list [catch {file attributes foo.dir -readonly 1} msg] $msg [file delete -force foo.dir] +} {1 {cannot set a directory to read-only when File Sharing is turned off} {}} diff --git a/tests/misc.test b/tests/misc.test new file mode 100644 index 0000000..b2168c1 --- /dev/null +++ b/tests/misc.test @@ -0,0 +1,51 @@ +# Commands covered: various +# +# This file contains a collection of miscellaneous Tcl tests that +# don't fit naturally in any of the other test files. Many of these +# tests are pathological cases that caused bugs in earlier Tcl +# releases. +# +# Copyright (c) 1992-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) misc.test 1.12 97/07/02 16:41:34 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test misc-1.1 {error in variable ref. in command in array reference} { + proc tstProc {} { + global a + + set tst $a([winfo name $zz]) + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + } + set msg {} + list [catch tstProc msg] $msg +} {1 {can't read "zz": no such variable}} +test misc-1.2 {error in variable ref. in command in array reference} { + proc tstProc {} " + global a + + set tst \$a(\[winfo name \$\{zz) + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + # this is a bogus comment + " + set msg {} + list [catch tstProc msg] $msg $errorInfo +} {1 {missing close-bracket or close-brace} missing\ close-bracket\ or\ close-brace\n\ \ \ \ while\ compiling\n\"set\ tst\ \$a(\[winfo\ name\ \$\{zz)\"\n\ \ \ \ (compiling\ body\ of\ proc\ \"tstProc\",\ line\ 4)\n\ \ \ \ invoked\ from\ within\n\"tstProc\"} diff --git a/tests/namespace-old.test b/tests/namespace-old.test new file mode 100644 index 0000000..f743722 --- /dev/null +++ b/tests/namespace-old.test @@ -0,0 +1,844 @@ +# Functionality covered: this file contains slightly modified versions of +# the original tests written by Mike McLennan of Lucent Technologies for +# the procedures in tclNamesp.c that implement Tcl's basic support for +# namespaces. Other namespace-related tests appear in namespace.test +# and variable.test. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# Copyright (c) 1997 Lucent Technologies +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) namespace-old.test 1.5 97/06/20 14:51:17 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Clear out any namespaces called test_ns_* +catch {eval namespace delete [namespace children :: test_ns_*]} + +test namespace-old-1.1 {usage for "namespace" command} { + list [catch {namespace} msg] $msg +} {1 {wrong # args: should be "namespace subcommand ?arg ...?"}} + +test namespace-old-1.2 {global namespace's name is "::" or {}} { + list [namespace current] [namespace eval {} {namespace current}] +} {:: ::} + +test namespace-old-1.3 {usage for "namespace eval"} { + list [catch {namespace eval} msg] $msg +} {1 {wrong # args: should be "namespace eval name arg ?arg...?"}} + +test namespace-old-1.4 {create new namespaces} { + list [lsort [namespace children :: test_ns_simple*]] \ + [namespace eval test_ns_simple {}] \ + [namespace eval test_ns_simple2 {}] \ + [lsort [namespace children :: test_ns_simple*]] +} {{} {} {} {::test_ns_simple ::test_ns_simple2}} + +test namespace-old-1.5 {access a new namespace} { + namespace eval test_ns_simple { namespace current } +} {::test_ns_simple} + +test namespace-old-1.6 {usage for "namespace eval"} { + list [catch {namespace eval} msg] $msg +} {1 {wrong # args: should be "namespace eval name arg ?arg...?"}} + +test namespace-old-1.7 {usage for "namespace eval"} { + list [catch {namespace eval test_ns_xyzzy} msg] $msg +} {1 {wrong # args: should be "namespace eval name arg ?arg...?"}} + +test namespace-old-1.8 {command "namespace eval" concatenates args} { + namespace eval test_ns_simple namespace current +} {::test_ns_simple} + +test namespace-old-1.9 {add elements to a namespace} { + namespace eval test_ns_simple { + variable test_ns_x 0 + proc test {test_ns_x} { + return "test: $test_ns_x" + } + } +} {} + +test namespace-old-1.10 {commands in a namespace} { + namespace eval test_ns_simple { info commands [namespace current]::*} +} {::test_ns_simple::test} + +test namespace-old-1.11 {variables in a namespace} { + namespace eval test_ns_simple { info vars [namespace current]::* } +} {::test_ns_simple::test_ns_x} + +test namespace-old-1.12 {global vars are separate from locals vars} { + list [test_ns_simple::test 123] [set test_ns_simple::test_ns_x] +} {{test: 123} 0} + +test namespace-old-1.13 {add to an existing namespace} { + namespace eval test_ns_simple { + variable test_ns_y 123 + proc _backdoor {cmd} { + eval $cmd + } + } +} "" + +test namespace-old-1.14 {commands in a namespace} { + lsort [namespace eval test_ns_simple {info commands [namespace current]::*}] +} {::test_ns_simple::_backdoor ::test_ns_simple::test} + +test namespace-old-1.15 {variables in a namespace} { + lsort [namespace eval test_ns_simple {info vars [namespace current]::*}] +} {::test_ns_simple::test_ns_x ::test_ns_simple::test_ns_y} +test namespace-old-1.16 {variables in a namespace} { + lsort [info vars test_ns_simple::*] +} {::test_ns_simple::test_ns_x ::test_ns_simple::test_ns_y} + +test namespace-old-1.17 {commands in a namespace are hidden} { + list [catch "_backdoor {return yes!}" msg] $msg +} {1 {invalid command name "_backdoor"}} +test namespace-old-1.18 {using namespace qualifiers} { + list [catch "test_ns_simple::_backdoor {return yes!}" msg] $msg +} {0 yes!} +test namespace-old-1.19 {using absolute namespace qualifiers} { + list [catch "::test_ns_simple::_backdoor {return yes!}" msg] $msg +} {0 yes!} + +test namespace-old-1.20 {variables in a namespace are hidden} { + list [catch "set test_ns_x" msg] $msg [catch "set test_ns_y" msg] $msg +} {1 {can't read "test_ns_x": no such variable} 1 {can't read "test_ns_y": no such variable}} +test namespace-old-1.21 {using namespace qualifiers} { + list [catch "set test_ns_simple::test_ns_x" msg] $msg \ + [catch "set test_ns_simple::test_ns_y" msg] $msg +} {0 0 0 123} +test namespace-old-1.22 {using absolute namespace qualifiers} { + list [catch "set ::test_ns_simple::test_ns_x" msg] $msg \ + [catch "set ::test_ns_simple::test_ns_y" msg] $msg +} {0 0 0 123} +test namespace-old-1.23 {variables can be accessed within a namespace} { + test_ns_simple::_backdoor { + variable test_ns_x + variable test_ns_y + return "$test_ns_x $test_ns_y" + } +} {0 123} + +test namespace-old-1.24 {setting global variables} { + test_ns_simple::_backdoor {variable test_ns_x; set test_ns_x "new val"} + namespace eval test_ns_simple {set test_ns_x} +} {new val} + +test namespace-old-1.25 {qualified variables don't need a global declaration} { + namespace eval test_ns_another { variable test_ns_x 456 } + set cmd {set ::test_ns_another::test_ns_x} + list [catch {test_ns_simple::_backdoor "$cmd some-value"} msg] $msg \ + [eval $cmd] +} {0 some-value some-value} + +test namespace-old-1.26 {namespace qualifiers are okay after $'s} { + namespace eval test_ns_simple { set test_ns_x 12; set test_ns_y 34 } + set cmd {list $::test_ns_simple::test_ns_x $::test_ns_simple::test_ns_y} + list [test_ns_simple::_backdoor $cmd] [eval $cmd] +} {{12 34} {12 34}} + +test namespace-old-1.27 {can create commands with null names} { + proc test_ns_simple:: {args} {return $args} +} {} + +# ----------------------------------------------------------------------- +# TEST: using "info" in namespace contexts +# ----------------------------------------------------------------------- +test namespace-old-2.1 {querying: info commands} { + lsort [test_ns_simple::_backdoor {info commands [namespace current]::*}] +} {::test_ns_simple:: ::test_ns_simple::_backdoor ::test_ns_simple::test} + +test namespace-old-2.2 {querying: info procs} { + lsort [test_ns_simple::_backdoor {info procs}] +} {{} _backdoor test} + +test namespace-old-2.3 {querying: info vars} { + lsort [info vars test_ns_simple::*] +} {::test_ns_simple::test_ns_x ::test_ns_simple::test_ns_y} + +test namespace-old-2.4 {querying: info vars} { + lsort [test_ns_simple::_backdoor {info vars [namespace current]::*}] +} {::test_ns_simple::test_ns_x ::test_ns_simple::test_ns_y} + +test namespace-old-2.5 {querying: info locals} { + lsort [test_ns_simple::_backdoor {info locals}] +} {cmd} + +test namespace-old-2.6 {querying: info exists} { + test_ns_simple::_backdoor {info exists test_ns_x} +} {0} + +test namespace-old-2.7 {querying: info exists} { + test_ns_simple::_backdoor {info exists cmd} +} {1} + +test namespace-old-2.8 {querying: info args} { + info args test_ns_simple::_backdoor +} {cmd} + +test namespace-old-2.9 {querying: info body} { + string trim [info body test_ns_simple::test] +} {return "test: $test_ns_x"} + +# ----------------------------------------------------------------------- +# TEST: namespace qualifiers, namespace tail +# ----------------------------------------------------------------------- +test namespace-old-3.1 {usage for "namespace qualifiers"} { + list [catch "namespace qualifiers" msg] $msg +} {1 {wrong # args: should be "namespace qualifiers string"}} + +test namespace-old-3.2 {querying: namespace qualifiers} { + list [namespace qualifiers ""] \ + [namespace qualifiers ::] \ + [namespace qualifiers x] \ + [namespace qualifiers ::x] \ + [namespace qualifiers foo::x] \ + [namespace qualifiers ::foo::bar::xyz] +} {{} {} {} {} foo ::foo::bar} + +test namespace-old-3.3 {usage for "namespace tail"} { + list [catch "namespace tail" msg] $msg +} {1 {wrong # args: should be "namespace tail string"}} + +test namespace-old-3.4 {querying: namespace tail} { + list [namespace tail ""] \ + [namespace tail ::] \ + [namespace tail x] \ + [namespace tail ::x] \ + [namespace tail foo::x] \ + [namespace tail ::foo::bar::xyz] +} {{} {} x x x xyz} + +# ----------------------------------------------------------------------- +# TEST: delete commands and namespaces +# ----------------------------------------------------------------------- +test namespace-old-4.1 {define test namespaces} { + namespace eval test_ns_delete { + namespace eval ns1 { + variable var1 1 + proc cmd1 {} {return "cmd1"} + } + namespace eval ns2 { + variable var2 2 + proc cmd2 {} {return "cmd2"} + } + namespace eval another {} + lsort [namespace children] + } +} {::test_ns_delete::another ::test_ns_delete::ns1 ::test_ns_delete::ns2} + +test namespace-old-4.2 {it's okay to invoke "namespace delete" with no args} { + list [catch {namespace delete} msg] $msg +} {0 {}} + +test namespace-old-4.3 {command "namespace delete" doesn't support patterns} { + set cmd { + namespace eval test_ns_delete {namespace delete ns*} + } + list [catch $cmd msg] $msg +} {1 {unknown namespace "ns*" in namespace delete command}} + +test namespace-old-4.4 {command "namespace delete" handles multiple args} { + set cmd { + namespace eval test_ns_delete { + eval namespace delete \ + [namespace children [namespace current] ns?] + } + } + list [catch $cmd msg] $msg [namespace children test_ns_delete] +} {0 {} ::test_ns_delete::another} + +# ----------------------------------------------------------------------- +# TEST: namespace hierarchy +# ----------------------------------------------------------------------- +test namespace-old-5.1 {define nested namespaces} { + set test_ns_var_global "var in ::" + proc test_ns_cmd_global {} {return "cmd in ::"} + + namespace eval test_ns_hier1 { + set test_ns_var_hier1 "particular to hier1" + proc test_ns_cmd_hier1 {} {return "particular to hier1"} + + set test_ns_level 1 + proc test_ns_show {} {return "[namespace current]: 1"} + + namespace eval test_ns_hier2 { + set test_ns_var_hier2 "particular to hier2" + proc test_ns_cmd_hier2 {} {return "particular to hier2"} + + set test_ns_level 2 + proc test_ns_show {} {return "[namespace current]: 2"} + + namespace eval test_ns_hier3a {} + namespace eval test_ns_hier3b {} + } + + namespace eval test_ns_hier2a {} + namespace eval test_ns_hier2b {} + } +} {} + +test namespace-old-5.2 {namespaces can be nested} { + list [namespace eval test_ns_hier1 {namespace current}] \ + [namespace eval test_ns_hier1 { + namespace eval test_ns_hier2 {namespace current} + }] +} {::test_ns_hier1 ::test_ns_hier1::test_ns_hier2} + +test namespace-old-5.3 {namespace qualifiers work in namespace command} { + list [namespace eval ::test_ns_hier1 {namespace current}] \ + [namespace eval test_ns_hier1::test_ns_hier2 {namespace current}] \ + [namespace eval ::test_ns_hier1::test_ns_hier2 {namespace current}] +} {::test_ns_hier1 ::test_ns_hier1::test_ns_hier2 ::test_ns_hier1::test_ns_hier2} + +test namespace-old-5.4 {nested namespaces can access global namespace} { + list [namespace eval test_ns_hier1 {set test_ns_var_global}] \ + [namespace eval test_ns_hier1 {test_ns_cmd_global}] \ + [namespace eval test_ns_hier1::test_ns_hier2 {set test_ns_var_global}] \ + [namespace eval test_ns_hier1::test_ns_hier2 {test_ns_cmd_global}] +} {{var in ::} {cmd in ::} {var in ::} {cmd in ::}} + +test namespace-old-5.5 {variables in different namespaces don't conflict} { + list [set test_ns_hier1::test_ns_level] \ + [set test_ns_hier1::test_ns_hier2::test_ns_level] +} {1 2} + +test namespace-old-5.6 {commands in different namespaces don't conflict} { + list [test_ns_hier1::test_ns_show] \ + [test_ns_hier1::test_ns_hier2::test_ns_show] +} {{::test_ns_hier1: 1} {::test_ns_hier1::test_ns_hier2: 2}} + +test namespace-old-5.7 {nested namespaces don't see variables in parent} { + set cmd { + namespace eval test_ns_hier1::test_ns_hier2 {set test_ns_var_hier1} + } + list [catch $cmd msg] $msg +} {1 {can't read "test_ns_var_hier1": no such variable}} + +test namespace-old-5.8 {nested namespaces don't see commands in parent} { + set cmd { + namespace eval test_ns_hier1::test_ns_hier2 {test_ns_cmd_hier1} + } + list [catch $cmd msg] $msg +} {1 {invalid command name "test_ns_cmd_hier1"}} + +test namespace-old-5.9 {usage for "namespace children"} { + list [catch {namespace children test_ns_hier1 y z} msg] $msg +} {1 {wrong # args: should be "namespace children ?name? ?pattern?"}} + +test namespace-old-5.10 {command "namespace children" must get valid namespace} { + list [catch {namespace children xyzzy} msg] $msg +} {1 {unknown namespace "xyzzy" in namespace children command}} + +test namespace-old-5.11 {querying namespace children} { + lsort [namespace children :: test_ns_hier*] +} {::test_ns_hier1} + +test namespace-old-5.12 {querying namespace children} { + lsort [namespace children test_ns_hier1] +} {::test_ns_hier1::test_ns_hier2 ::test_ns_hier1::test_ns_hier2a ::test_ns_hier1::test_ns_hier2b} + +test namespace-old-5.13 {querying namespace children} { + lsort [namespace eval test_ns_hier1 {namespace children}] +} {::test_ns_hier1::test_ns_hier2 ::test_ns_hier1::test_ns_hier2a ::test_ns_hier1::test_ns_hier2b} + +test namespace-old-5.14 {querying namespace children} { + lsort [namespace children test_ns_hier1::test_ns_hier2] +} {::test_ns_hier1::test_ns_hier2::test_ns_hier3a ::test_ns_hier1::test_ns_hier2::test_ns_hier3b} + +test namespace-old-5.15 {querying namespace children} { + lsort [namespace eval test_ns_hier1::test_ns_hier2 {namespace children}] +} {::test_ns_hier1::test_ns_hier2::test_ns_hier3a ::test_ns_hier1::test_ns_hier2::test_ns_hier3b} + +test namespace-old-5.16 {querying namespace children with patterns} { + lsort [namespace children test_ns_hier1::test_ns_hier2 test_ns_*] +} {::test_ns_hier1::test_ns_hier2::test_ns_hier3a ::test_ns_hier1::test_ns_hier2::test_ns_hier3b} + +test namespace-old-5.17 {querying namespace children with patterns} { + lsort [namespace children test_ns_hier1::test_ns_hier2 *b] +} {::test_ns_hier1::test_ns_hier2::test_ns_hier3b} + +test namespace-old-5.18 {usage for "namespace parent"} { + list [catch {namespace parent x y} msg] $msg +} {1 {wrong # args: should be "namespace parent ?name?"}} + +test namespace-old-5.19 {command "namespace parent" must get valid namespace} { + list [catch {namespace parent xyzzy} msg] $msg +} {1 {unknown namespace "xyzzy" in namespace parent command}} + +test namespace-old-5.20 {querying namespace parent} { + list [namespace eval :: {namespace parent}] \ + [namespace eval test_ns_hier1 {namespace parent}] \ + [namespace eval test_ns_hier1::test_ns_hier2 {namespace parent}] \ + [namespace eval test_ns_hier1::test_ns_hier2::test_ns_hier3a {namespace parent}] \ +} {{} :: ::test_ns_hier1 ::test_ns_hier1::test_ns_hier2} + +test namespace-old-5.21 {querying namespace parent for explicit namespace} { + list [namespace parent ::] \ + [namespace parent test_ns_hier1] \ + [namespace parent test_ns_hier1::test_ns_hier2] \ + [namespace parent test_ns_hier1::test_ns_hier2::test_ns_hier3a] +} {{} :: ::test_ns_hier1 ::test_ns_hier1::test_ns_hier2} + +# ----------------------------------------------------------------------- +# TEST: name resolution and caching +# ----------------------------------------------------------------------- +test namespace-old-6.1 {relative ns names only looked up in current ns} { + namespace eval test_ns_cache1 {} + namespace eval test_ns_cache2 {} + namespace eval test_ns_cache2::test_ns_cache3 {} + set trigger { + namespace eval test_ns_cache2 {namespace current} + } + set trigger2 { + namespace eval test_ns_cache2::test_ns_cache3 {namespace current} + } + list [namespace eval test_ns_cache1 $trigger] \ + [namespace eval test_ns_cache1 $trigger2] +} {::test_ns_cache1::test_ns_cache2 ::test_ns_cache1::test_ns_cache2::test_ns_cache3} + +test namespace-old-6.2 {relative ns names only looked up in current ns} { + namespace eval test_ns_cache1::test_ns_cache2 {} + list [namespace eval test_ns_cache1 $trigger] \ + [namespace eval test_ns_cache1 $trigger2] +} {::test_ns_cache1::test_ns_cache2 ::test_ns_cache1::test_ns_cache2::test_ns_cache3} + +test namespace-old-6.3 {relative ns names only looked up in current ns} { + namespace eval test_ns_cache1::test_ns_cache2::test_ns_cache3 {} + list [namespace eval test_ns_cache1 $trigger] \ + [namespace eval test_ns_cache1 $trigger2] +} {::test_ns_cache1::test_ns_cache2 ::test_ns_cache1::test_ns_cache2::test_ns_cache3} + +test namespace-old-6.4 {relative ns names only looked up in current ns} { + namespace delete test_ns_cache1::test_ns_cache2 + list [namespace eval test_ns_cache1 $trigger] \ + [namespace eval test_ns_cache1 $trigger2] +} {::test_ns_cache1::test_ns_cache2 ::test_ns_cache1::test_ns_cache2::test_ns_cache3} + +test namespace-old-6.5 {define test commands} { + proc test_ns_cache_cmd {} { + return "global version" + } + namespace eval test_ns_cache1 { + proc trigger {} { + test_ns_cache_cmd + } + } + test_ns_cache1::trigger +} {global version} + +test namespace-old-6.6 {one-level check for command shadowing} { + proc test_ns_cache1::test_ns_cache_cmd {} { + return "cache1 version" + } + test_ns_cache1::trigger +} {cache1 version} + +test namespace-old-6.7 {renaming commands changes command epoch} { + namespace eval test_ns_cache1 { + rename test_ns_cache_cmd test_ns_new + } + test_ns_cache1::trigger +} {global version} + +test namespace-old-6.8 {renaming back handles shadowing} { + namespace eval test_ns_cache1 { + rename test_ns_new test_ns_cache_cmd + } + test_ns_cache1::trigger +} {cache1 version} + +test namespace-old-6.9 {deleting commands changes command epoch} { + namespace eval test_ns_cache1 { + rename test_ns_cache_cmd "" + } + test_ns_cache1::trigger +} {global version} + +test namespace-old-6.10 {define test namespaces} { + namespace eval test_ns_cache2 { + proc test_ns_cache_cmd {} { + return "global cache2 version" + } + } + namespace eval test_ns_cache1 { + proc trigger {} { + test_ns_cache2::test_ns_cache_cmd + } + } + namespace eval test_ns_cache1::test_ns_cache2 { + proc trigger {} { + test_ns_cache_cmd + } + } + list [test_ns_cache1::trigger] [test_ns_cache1::test_ns_cache2::trigger] +} {{global cache2 version} {global version}} + +test namespace-old-6.11 {commands affect all parent namespaces} { + proc test_ns_cache1::test_ns_cache2::test_ns_cache_cmd {} { + return "cache2 version" + } + list [test_ns_cache1::trigger] [test_ns_cache1::test_ns_cache2::trigger] +} {{cache2 version} {cache2 version}} + +test namespace-old-6.12 {define test variables} { + variable test_ns_cache_var "global version" + set trigger {set test_ns_cache_var} + namespace eval test_ns_cache1 $trigger +} {global version} + +test namespace-old-6.13 {one-level check for variable shadowing} { + namespace eval test_ns_cache1 { + variable test_ns_cache_var "cache1 version" + } + namespace eval test_ns_cache1 $trigger +} {cache1 version} + +test namespace-old-6.14 {deleting variables changes variable epoch} { + namespace eval test_ns_cache1 { + unset test_ns_cache_var + } + namespace eval test_ns_cache1 $trigger +} {global version} + +test namespace-old-6.15 {define test namespaces} { + namespace eval test_ns_cache2 { + variable test_ns_cache_var "global cache2 version" + } + set trigger2 {set test_ns_cache2::test_ns_cache_var} + list [namespace eval test_ns_cache1 $trigger2] \ + [namespace eval test_ns_cache1::test_ns_cache2 $trigger] +} {{global cache2 version} {global version}} + +test namespace-old-6.16 {public variables affect all parent namespaces} { + variable test_ns_cache1::test_ns_cache2::test_ns_cache_var "cache2 version" + list [namespace eval test_ns_cache1 $trigger2] \ + [namespace eval test_ns_cache1::test_ns_cache2 $trigger] +} {{cache2 version} {cache2 version}} + +test namespace-old-6.17 {usage for "namespace which"} { + list [catch "namespace which -baz" msg] $msg +} {1 {wrong # args: should be "namespace which ?-command? ?-variable? name"}} +test namespace-old-6.18 {usage for "namespace which"} { + list [catch "namespace which -command" msg] $msg +} {1 {wrong # args: should be "namespace which ?-command? ?-variable? name"}} + +test namespace-old-6.19 {querying: namespace which -command} { + proc test_ns_cache1::test_ns_cache_cmd {} { + return "cache1 version" + } + list [namespace eval :: {namespace which test_ns_cache_cmd}] \ + [namespace eval test_ns_cache1 {namespace which test_ns_cache_cmd}] \ + [namespace eval :: {namespace which -command test_ns_cache_cmd}] \ + [namespace eval test_ns_cache1 {namespace which -command test_ns_cache_cmd}] +} {::test_ns_cache_cmd ::test_ns_cache1::test_ns_cache_cmd ::test_ns_cache_cmd ::test_ns_cache1::test_ns_cache_cmd} + +test namespace-old-6.20 {command "namespace which" may not find commands} { + namespace eval test_ns_cache1 {namespace which -command xyzzy} +} {} + +test namespace-old-6.21 {querying: namespace which -variable} { + namespace eval test_ns_cache1::test_ns_cache2 { + namespace which -variable test_ns_cache_var + } +} {::test_ns_cache1::test_ns_cache2::test_ns_cache_var} + +test namespace-old-6.22 {command "namespace which" may not find variables} { + namespace eval test_ns_cache1 {namespace which -variable xyzzy} +} {} + +# ----------------------------------------------------------------------- +# TEST: uplevel/upvar across namespace boundaries +# ----------------------------------------------------------------------- +test namespace-old-7.1 {define test namespace} { + namespace eval test_ns_uplevel { + variable x 0 + variable y 1 + + proc show_vars {num} { + return [uplevel $num {info vars}] + } + proc test_uplevel {num} { + set a 0 + set b 1 + namespace eval ::test_ns_uplevel " return \[show_vars $num\] " + } + } +} {} +test namespace-old-7.2 {uplevel can access namespace call frame} { + list [expr {[lsearch -exact [test_ns_uplevel::test_uplevel 1] x]>=0}] \ + [expr {[lsearch -exact [test_ns_uplevel::test_uplevel 1] y]>=0}] +} {1 1} +test namespace-old-7.3 {uplevel can go beyond namespace call frame} { + lsort [test_ns_uplevel::test_uplevel 2] +} {a b num} +test namespace-old-7.4 {uplevel can go up to global context} { + expr {[test_ns_uplevel::test_uplevel 3] == [info globals]} +} {1} + +test namespace-old-7.5 {absolute call frame references work too} { + list [expr {[lsearch -exact [test_ns_uplevel::test_uplevel #2] x]>=0}] \ + [expr {[lsearch -exact [test_ns_uplevel::test_uplevel #2] y]>=0}] +} {1 1} +test namespace-old-7.6 {absolute call frame references work too} { + lsort [test_ns_uplevel::test_uplevel #1] +} {a b num} +test namespace-old-7.7 {absolute call frame references work too} { + expr {[test_ns_uplevel::test_uplevel #0] == [info globals]} +} {1} + +test namespace-old-7.8 {namespaces are included in the call stack} { + namespace eval test_ns_upvar { + variable scope "test_ns_upvar" + + proc show_val {var num} { + upvar $num $var x + return $x + } + proc test_upvar {num} { + set scope "test_ns_upvar::test_upvar" + namespace eval ::test_ns_upvar " return \[show_val scope $num\] " + } + } +} {} +test namespace-old-7.9 {upvar can access namespace call frame} { + test_ns_upvar::test_upvar 1 +} {test_ns_upvar} +test namespace-old-7.10 {upvar can go beyond namespace call frame} { + test_ns_upvar::test_upvar 2 +} {test_ns_upvar::test_upvar} +test namespace-old-7.11 {absolute call frame references work too} { + test_ns_upvar::test_upvar #2 +} {test_ns_upvar} +test namespace-old-7.12 {absolute call frame references work too} { + test_ns_upvar::test_upvar #1 +} {test_ns_upvar::test_upvar} + +# ----------------------------------------------------------------------- +# TEST: variable traces across namespace boundaries +# ----------------------------------------------------------------------- +test namespace-old-8.1 {traces work across namespace boundaries} { + namespace eval test_ns_trace { + namespace eval foo { + variable x "" + } + + variable status "" + proc monitor {name1 name2 op} { + variable status + lappend status "$op: $name1" + } + trace variable foo::x rwu [namespace code monitor] + } + set test_ns_trace::foo::x "yes!" + set test_ns_trace::foo::x + unset test_ns_trace::foo::x + + namespace eval test_ns_trace { set status } +} {{w: test_ns_trace::foo::x} {r: test_ns_trace::foo::x} {u: test_ns_trace::foo::x}} + +# ----------------------------------------------------------------------- +# TEST: imported commands +# ----------------------------------------------------------------------- +test namespace-old-9.1 {empty "namespace export" list} { + list [catch "namespace export" msg] $msg +} {0 {}} +test namespace-old-9.2 {usage for "namespace export" command} { + list [catch "namespace export test_ns_trace::zzz" msg] $msg +} {1 {invalid export pattern "test_ns_trace::zzz": pattern can't specify a namespace}} + +test namespace-old-9.3 {define test namespaces for import} { + namespace eval test_ns_export { + namespace export cmd1 cmd2 cmd3 + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + proc cmd3 {args} {return "cmd3: $args"} + proc cmd4 {args} {return "cmd4: $args"} + proc cmd5 {args} {return "cmd5: $args"} + proc cmd6 {args} {return "cmd6: $args"} + } + lsort [info commands test_ns_export::*] +} {::test_ns_export::cmd1 ::test_ns_export::cmd2 ::test_ns_export::cmd3 ::test_ns_export::cmd4 ::test_ns_export::cmd5 ::test_ns_export::cmd6} + +test namespace-old-9.4 {check export status} { + set x "" + namespace eval test_ns_import { + namespace export cmd1 cmd2 + namespace import ::test_ns_export::* + } + foreach cmd [lsort [info commands test_ns_import::*]] { + lappend x $cmd + } + set x +} {::test_ns_import::cmd1 ::test_ns_import::cmd2 ::test_ns_import::cmd3} + +test namespace-old-9.5 {empty import list in "namespace import" command} { + namespace import +} {} + +test namespace-old-9.6 {empty import list for "namespace import" command} { + namespace import +} {} + +test namespace-old-9.7 {empty forget list for "namespace forget" command} { + namespace forget +} {} + +catch {rename cmd1 {}} +catch {rename cmd2 {}} +catch {rename ncmd {}} +catch {rename ncmd1 {}} +catch {rename ncmd2 {}} +test namespace-old-9.8 {only exported commands are imported} { + namespace import test_ns_import::cmd* + set x [lsort [info commands cmd*]] +} {cmd1 cmd2} + +test namespace-old-9.9 {imported commands work just the same as original} { + list [cmd1 test 1 2 3] [test_ns_import::cmd1 test 4 5 6] +} {{cmd1: test 1 2 3} {cmd1: test 4 5 6}} + +test namespace-old-9.10 {commands can be imported from many namespaces} { + namespace eval test_ns_import2 { + namespace export ncmd ncmd1 ncmd2 + proc ncmd {args} {return "ncmd: $args"} + proc ncmd1 {args} {return "ncmd1: $args"} + proc ncmd2 {args} {return "ncmd2: $args"} + proc ncmd3 {args} {return "ncmd3: $args"} + } + namespace import test_ns_import2::* + lsort [concat [info commands cmd*] [info commands ncmd*]] +} {cmd1 cmd2 ncmd ncmd1 ncmd2} + +test namespace-old-9.11 {imported commands can be removed by deleting them} { + rename cmd1 "" + lsort [concat [info commands cmd*] [info commands ncmd*]] +} {cmd2 ncmd ncmd1 ncmd2} + +test namespace-old-9.12 {command "namespace forget" checks for valid namespaces} { + list [catch {namespace forget xyzzy::*} msg] $msg +} {1 {unknown namespace in namespace forget pattern "xyzzy::*"}} + +test namespace-old-9.13 {command "namespace forget" ignores patterns that don't match} { + list [catch {namespace forget test_ns_import::xy*zzy} msg] $msg \ + [lsort [info commands cmd?]] +} {0 {} cmd2} + +test namespace-old-9.14 {imported commands can be removed} { + namespace forget test_ns_import::cmd? + list [lsort [info commands cmd?]] \ + [catch {cmd1 another test} msg] $msg +} {{} 1 {invalid command name "cmd1"}} + +test namespace-old-9.15 {existing commands can't be overwritten} { + proc cmd1 {x y} { + return [expr $x+$y] + } + list [catch {namespace import test_ns_import::cmd?} msg] $msg \ + [cmd1 3 5] +} {1 {can't import command "cmd1": already exists} 8} + +test namespace-old-9.16 {use "-force" option to override existing commands} { + list [cmd1 3 5] \ + [namespace import -force test_ns_import::cmd?] \ + [cmd1 3 5] +} {8 {} {cmd1: 3 5}} + +test namespace-old-9.17 {commands can be imported into many namespaces} { + namespace eval test_ns_import_use { + namespace import ::test_ns_import::* ::test_ns_import2::ncmd? + lsort [concat [info commands ::test_ns_import_use::cmd*] \ + [info commands ::test_ns_import_use::ncmd*]] + } +} {::test_ns_import_use::cmd1 ::test_ns_import_use::cmd2 ::test_ns_import_use::ncmd1 ::test_ns_import_use::ncmd2} + +test namespace-old-9.18 {when command is deleted, imported commands go away} { + namespace eval test_ns_import { rename cmd1 "" } + list [info commands cmd1] \ + [namespace eval test_ns_import_use {info commands cmd1}] +} {{} {}} + +test namespace-old-9.19 {when namesp is deleted, all imported commands go away} { + namespace delete test_ns_import test_ns_import2 + list [info commands cmd*] \ + [info commands ncmd*] \ + [namespace eval test_ns_import_use {info commands cmd*}] \ + [namespace eval test_ns_import_use {info commands ncmd*}] \ +} {{} {} {} {}} + +# ----------------------------------------------------------------------- +# TEST: scoped values +# ----------------------------------------------------------------------- +test namespace-old-10.1 {define namespace for scope test} { + namespace eval test_ns_inscope { + variable x "x-value" + proc show {args} { + return "show: $args" + } + proc do {args} { + return [eval $args] + } + list [set x] [show test] + } +} {x-value {show: test}} + +test namespace-old-10.2 {command "namespace code" requires one argument} { + list [catch {namespace code} msg] $msg +} {1 {wrong # args: should be "namespace code arg"}} + +test namespace-old-10.3 {command "namespace code" requires one argument} { + list [catch {namespace code first "second arg" third} msg] $msg +} {1 {wrong # args: should be "namespace code arg"}} + +test namespace-old-10.4 {command "namespace code" gets current namesp context} { + namespace eval test_ns_inscope { + namespace code {"1 2 3" "4 5" 6} + } +} {namespace inscope ::test_ns_inscope {"1 2 3" "4 5" 6}} + +test namespace-old-10.5 {with one arg, first "scope" sticks} { + set sval [namespace eval test_ns_inscope {namespace code {one two}}] + namespace code $sval +} {namespace inscope ::test_ns_inscope {one two}} + +test namespace-old-10.6 {with many args, each "scope" adds new args} { + set sval [namespace eval test_ns_inscope {namespace code {one two}}] + namespace code "$sval three" +} {namespace inscope ::test_ns_inscope {one two} three} + +test namespace-old-10.7 {scoped commands work with eval} { + set cref [namespace eval test_ns_inscope {namespace code show}] + list [eval $cref "a" "b c" "d e f"] +} {{show: a b c d e f}} + +test namespace-old-10.8 {scoped commands execute in namespace context} { + set cref [namespace eval test_ns_inscope { + namespace code {set x "some new value"} + }] + list [set test_ns_inscope::x] [eval $cref] [set test_ns_inscope::x] +} {x-value {some new value} {some new value}} + +foreach cmd [info commands test_ns_*] { + rename $cmd "" +} +catch {rename cmd {}} +catch {rename cmd1 {}} +catch {rename cmd2 {}} +catch {rename ncmd {}} +catch {rename ncmd1 {}} +catch {rename ncmd2 {}} +catch {unset cref} +catch {unset trigger} +catch {unset trigger2} +catch {unset sval} +catch {unset msg} +catch {unset x} +catch {unset test_ns_var_global} +catch {unset cmd} +eval namespace delete [namespace children :: test_ns_*] diff --git a/tests/namespace.test b/tests/namespace.test new file mode 100644 index 0000000..e876391 --- /dev/null +++ b/tests/namespace.test @@ -0,0 +1,1080 @@ +# Functionality covered: this file contains a collection of tests for the +# procedures in tclNamesp.c that implement Tcl's basic support for +# namespaces. Other namespace-related tests appear in variable.test. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) namespace.test 1.15 97/07/30 15:26:42 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Clear out any namespaces called test_ns_* +catch {eval namespace delete [namespace children :: test_ns_*]} + +test namespace-1.1 {TclInitNamespaces, GetNamespaceFromObj, NamespaceChildrenCmd} { + namespace children :: test_ns_* +} {} + +catch {unset l} +test namespace-2.1 {Tcl_GetCurrentNamespace} { + list [namespace current] [namespace eval {} {namespace current}] \ + [namespace eval {} {namespace current}] +} {:: :: ::} +test namespace-2.2 {Tcl_GetCurrentNamespace} { + set l {} + lappend l [namespace current] + namespace eval test_ns_1 { + lappend l [namespace current] + namespace eval foo { + lappend l [namespace current] + } + } + lappend l [namespace current] + set l +} {:: ::test_ns_1 ::test_ns_1::foo ::} + +test namespace-3.1 {Tcl_GetGlobalNamespace} { + namespace eval test_ns_1 {namespace eval foo {namespace eval bar {} } } + # namespace children uses Tcl_GetGlobalNamespace + namespace eval test_ns_1 {namespace children foo b*} +} {::test_ns_1::foo::bar} + +test namespace-4.1 {Tcl_PushCallFrame with isProcCallFrame=1} { + namespace eval test_ns_1 { + variable v 123 + proc p {} { + variable v + return $v + } + } + test_ns_1::p ;# does Tcl_PushCallFrame to push p's namespace +} {123} +test namespace-4.2 {Tcl_PushCallFrame with isProcCallFrame=0} { + namespace eval test_ns_1::baz {} ;# does Tcl_PushCallFrame to create baz + proc test_ns_1::baz::p {} { + variable v + set v 789 + set v} + test_ns_1::baz::p +} {789} + +test namespace-5.1 {Tcl_PopCallFrame, no vars} { + namespace eval test_ns_1::blodge {} ;# pushes then pops frame +} {} +test namespace-5.2 {Tcl_PopCallFrame, local vars must be deleted} { + proc test_ns_1::r {} { + set a 123 + } + test_ns_1::r ;# pushes then pop's r's frame +} {123} + +test namespace-6.1 {Tcl_CreateNamespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [lsort [namespace children :: test_ns_*]] \ + [namespace eval test_ns_1 {namespace current}] \ + [namespace eval test_ns_2 {namespace current}] \ + [namespace eval ::test_ns_3 {namespace current}] \ + [namespace eval ::test_ns_4 \ + {namespace eval foo {namespace current}}] \ + [namespace eval ::test_ns_5 \ + {namespace eval ::test_ns_6 {namespace current}}] \ + [lsort [namespace children :: test_ns_*]] +} {{} ::test_ns_1 ::test_ns_2 ::test_ns_3 ::test_ns_4::foo ::test_ns_6 {::test_ns_1 ::test_ns_2 ::test_ns_3 ::test_ns_4 ::test_ns_5 ::test_ns_6}} +test namespace-6.2 {Tcl_CreateNamespace, odd number of :'s in name is okay} { + list [namespace eval :::test_ns_1::::foo {namespace current}] \ + [namespace eval test_ns_2:::::foo {namespace current}] +} {::test_ns_1::foo ::test_ns_2::foo} +test namespace-6.3 {Tcl_CreateNamespace, trailing ::s in ns name are ignored} { + list [catch {namespace eval test_ns_7::: {namespace current}} msg] $msg +} {0 ::test_ns_7} +test namespace-6.4 {Tcl_CreateNamespace, trailing ::s in ns name are ignored} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1:: { + namespace eval test_ns_2:: {} + namespace eval test_ns_3:: {} + } + namespace children ::test_ns_1 +} {::test_ns_1::test_ns_2 ::test_ns_1::test_ns_3} +test namespace-6.5 {Tcl_CreateNamespace, relative ns names now only looked up in current ns} { + set trigger { + namespace eval test_ns_2 {namespace current} + } + set l {} + lappend l [namespace eval test_ns_1 $trigger] + namespace eval test_ns_1::test_ns_2 {} + lappend l [namespace eval test_ns_1 $trigger] +} {::test_ns_1::test_ns_2 ::test_ns_1::test_ns_2} + +test namespace-7.1 {Tcl_DeleteNamespace, active call frames in ns} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 { + proc p {} { + namespace delete [namespace current] + return [namespace current] + } + } + list [test_ns_1::p] [catch {test_ns_1::p} msg] $msg +} {::test_ns_1 1 {invalid command name "test_ns_1::p"}} +test namespace-7.2 {Tcl_DeleteNamespace, no active call frames in ns} { + namespace eval test_ns_2 { + proc p {} { + return [namespace current] + } + } + list [test_ns_2::p] [namespace delete test_ns_2] +} {::test_ns_2 {}} + +test namespace-8.1 {TclTeardownNamespace, delete global namespace} { + catch {interp delete test_interp} + interp create test_interp + interp eval test_interp { + namespace eval test_ns_1 { + namespace export p + proc p {} { + return [namespace current] + } + } + namespace eval test_ns_2 { + namespace import ::test_ns_1::p + variable v 27 + proc q {} { + variable v + return "[p] $v" + } + } + set x [test_ns_2::q] + catch {set xxxx} + } + list [interp eval test_interp {test_ns_2::q}] \ + [interp eval test_interp {namespace delete ::}] \ + [catch {interp eval test_interp {set a 123}} msg] $msg \ + [interp delete test_interp] +} {{::test_ns_1 27} {} 1 {invalid command name "set"} {}} +test namespace-8.2 {TclTeardownNamespace, remove deleted ns from parent} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1::test_ns_2::test_ns_3a {proc p {} {}} + namespace eval test_ns_1::test_ns_2::test_ns_3b {proc q {} {}} + list [namespace children test_ns_1] \ + [namespace delete test_ns_1::test_ns_2] \ + [namespace children test_ns_1] +} {::test_ns_1::test_ns_2 {} {}} +test namespace-8.3 {TclTeardownNamespace, delete child namespaces} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1::test_ns_2::test_ns_3a {proc p {} {}} + namespace eval test_ns_1::test_ns_2::test_ns_3b {proc q {} {}} + list [namespace children test_ns_1] \ + [namespace delete test_ns_1::test_ns_2] \ + [namespace children test_ns_1] \ + [catch {namespace children test_ns_1::test_ns_2} msg] $msg \ + [info commands test_ns_1::test_ns_2::test_ns_3a::*] +} {::test_ns_1::test_ns_2 {} {} 1 {unknown namespace "test_ns_1::test_ns_2" in namespace children command} {}} +test namespace-8.4 {TclTeardownNamespace, cmds imported from deleted ns go away} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_export { + namespace export cmd1 cmd2 + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + } + namespace eval test_ns_import { + namespace import ::test_ns_export::* + proc p {} {return foo} + } + list [info commands test_ns_import::*] \ + [namespace delete test_ns_export] \ + [info commands test_ns_import::*] +} {{::test_ns_import::p ::test_ns_import::cmd1 ::test_ns_import::cmd2} {} ::test_ns_import::p} + +test namespace-9.1 {Tcl_Import, empty import pattern} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace eval test_ns_import {namespace import {}}} msg] $msg +} {1 {empty import pattern}} +test namespace-9.2 {Tcl_Import, unknown namespace in import pattern} { + list [catch {namespace eval test_ns_import {namespace import fred::x}} msg] $msg +} {1 {unknown namespace in import pattern "fred::x"}} +test namespace-9.3 {Tcl_Import, import ns == export ns} { + list [catch {namespace eval test_ns_import {namespace import ::test_ns_import::puts}} msg] $msg +} {1 {import pattern "::test_ns_import::puts" tries to import from namespace "test_ns_import" into itself}} +test namespace-9.4 {Tcl_Import, simple import} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_export { + namespace export cmd1 + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + } + namespace eval test_ns_import { + namespace import ::test_ns_export::* + proc p {} {return [cmd1 123]} + } + test_ns_import::p +} {cmd1: 123} +test namespace-9.5 {Tcl_Import, can't redefine cmd unless allowOverwrite!=0} { + list [catch {namespace eval test_ns_import {namespace import ::test_ns_export::*}} msg] $msg +} {1 {can't import command "cmd1": already exists}} +test namespace-9.6 {Tcl_Import, cmd redefinition ok if allowOverwrite!=0} { + namespace eval test_ns_import { + namespace import -force ::test_ns_export::* + cmd1 555 + } +} {cmd1: 555} + +test namespace-10.1 {Tcl_ForgetImport, check for valid namespaces} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace forget xyzzy::*} msg] $msg +} {1 {unknown namespace in namespace forget pattern "xyzzy::*"}} +test namespace-10.2 {Tcl_ForgetImport, ignores patterns that don't match} { + namespace eval test_ns_export { + namespace export cmd1 + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + } + namespace eval test_ns_import { + namespace forget ::test_ns_export::wombat + } +} {} +test namespace-10.3 {Tcl_ForgetImport, deletes matching imported cmds} { + namespace eval test_ns_import { + namespace import ::test_ns_export::* + proc p {} {return [cmd1 123]} + set l {} + lappend l [info commands ::test_ns_import::*] + namespace forget ::test_ns_export::cmd1 + lappend l [info commands ::test_ns_import::*] + lappend l [catch {cmd1 777} msg] $msg + } +} {{::test_ns_import::p ::test_ns_import::cmd1} ::test_ns_import::p 1 {invalid command name "cmd1"}} + +test namespace-11.1 {TclGetOriginalCommand, check if not imported cmd} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_export { + namespace export cmd1 + proc cmd1 {args} {return "cmd1: $args"} + } + list [namespace origin set] [namespace origin test_ns_export::cmd1] +} {::set ::test_ns_export::cmd1} +test namespace-11.2 {TclGetOriginalCommand, directly imported cmd} { + namespace eval test_ns_import1 { + namespace import ::test_ns_export::* + namespace export * + proc p {} {namespace origin cmd1} + } + list [test_ns_import1::p] [namespace origin test_ns_import1::cmd1] +} {::test_ns_export::cmd1 ::test_ns_export::cmd1} +test namespace-11.3 {TclGetOriginalCommand, indirectly imported cmd} { + namespace eval test_ns_import2 { + namespace import ::test_ns_import1::* + proc q {} {return [cmd1 123]} + } + list [test_ns_import2::q] [namespace origin test_ns_import2::cmd1] +} {{cmd1: 123} ::test_ns_export::cmd1} + +test namespace-12.1 {InvokeImportedCmd} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_export { + namespace export cmd1 + proc cmd1 {args} {namespace current} + } + namespace eval test_ns_import { + namespace import ::test_ns_export::* + } + list [test_ns_import::cmd1] +} {::test_ns_export} + +test namespace-13.1 {DeleteImportedCmd, deletes imported cmds} { + namespace eval test_ns_import { + set l {} + lappend l [info commands ::test_ns_import::*] + namespace forget ::test_ns_export::cmd1 + lappend l [info commands ::test_ns_import::*] + } +} {::test_ns_import::cmd1 {}} + +test namespace-14.1 {TclGetNamespaceForQualName, absolute names} { + catch {eval namespace delete [namespace children :: test_ns_*]} + variable v 10 + namespace eval test_ns_1::test_ns_2 { + variable v 20 + } + namespace eval test_ns_2 { + variable v 30 + } + namespace eval test_ns_1 { + list $::v $::test_ns_2::v $::test_ns_1::test_ns_2::v \ + [namespace children :: test_ns_*] + } +} {10 30 20 {::test_ns_1 ::test_ns_2}} +test namespace-14.2 {TclGetNamespaceForQualName, invalid absolute names} { + namespace eval test_ns_1 { + list [catch {set ::test_ns_777::v} msg] $msg \ + [catch {namespace children test_ns_777} msg] $msg + } +} {1 {can't read "::test_ns_777::v": no such variable} 1 {unknown namespace "test_ns_777" in namespace children command}} +test namespace-14.3 {TclGetNamespaceForQualName, relative names} { + namespace eval test_ns_1 { + list $v $test_ns_2::v + } +} {10 20} +test namespace-14.4 {TclGetNamespaceForQualName, relative ns names looked up only in current ns} { + namespace eval test_ns_1::test_ns_2 { + namespace eval foo {} + } + namespace eval test_ns_1 { + list [namespace children test_ns_2] \ + [catch {namespace children test_ns_1} msg] $msg + } +} {::test_ns_1::test_ns_2::foo 1 {unknown namespace "test_ns_1" in namespace children command}} +test namespace-14.5 {TclGetNamespaceForQualName, relative ns names looked up only in current ns} { + namespace eval ::test_ns_2 { + namespace eval bar {} + } + namespace eval test_ns_1 { + set l [list [catch {namespace delete test_ns_2::bar} msg] $msg] + } + set l +} {1 {unknown namespace "test_ns_2::bar" in namespace delete command}} +test namespace-14.6 {TclGetNamespaceForQualName, relative ns names looked up only in current ns} { + namespace eval test_ns_1::test_ns_2 { + namespace eval foo {} + } + namespace eval test_ns_1 { + list [namespace children test_ns_2] \ + [catch {namespace children test_ns_1} msg] $msg + } +} {::test_ns_1::test_ns_2::foo 1 {unknown namespace "test_ns_1" in namespace children command}} +test namespace-14.7 {TclGetNamespaceForQualName, ignore extra :s if ns} { + namespace children test_ns_1::: +} {::test_ns_1::test_ns_2} +test namespace-14.8 {TclGetNamespaceForQualName, ignore extra :s if ns} { + namespace children :::test_ns_1:::::test_ns_2::: +} {::test_ns_1::test_ns_2::foo} +test namespace-14.9 {TclGetNamespaceForQualName, extra ::s are significant for vars} { + set l {} + lappend l [catch {set test_ns_1::test_ns_2::} msg] $msg + namespace eval test_ns_1::test_ns_2 {variable {} 2525} + lappend l [set test_ns_1::test_ns_2::] +} {1 {can't read "test_ns_1::test_ns_2::": no such variable} 2525} +test namespace-14.10 {TclGetNamespaceForQualName, extra ::s are significant for vars} { + catch {unset test_ns_1::test_ns_2::} + set l {} + lappend l [catch {set test_ns_1::test_ns_2::} msg] $msg + set test_ns_1::test_ns_2:: 314159 + lappend l [set test_ns_1::test_ns_2::] +} {1 {can't read "test_ns_1::test_ns_2::": no such variable} 314159} +test namespace-14.11 {TclGetNamespaceForQualName, extra ::s are significant for commands} { + catch {rename test_ns_1::test_ns_2:: {}} + set l {} + lappend l [catch {test_ns_1::test_ns_2:: hello} msg] $msg + proc test_ns_1::test_ns_2:: {args} {return "\{\}: $args"} + lappend l [test_ns_1::test_ns_2:: hello] +} {1 {invalid command name "test_ns_1::test_ns_2::"} {{}: hello}} +test namespace-14.12 {TclGetNamespaceForQualName, extra ::s are significant for vars} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 { + variable {} + set test_ns_1::(x) y + } + set test_ns_1::(x) +} y +test namespace-14.13 {TclGetNamespaceForQualName, namespace other than global ns can't have empty name} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace eval test_ns_1 {proc {} {} {}; namespace eval {} {}; {}}} msg] $msg +} {1 {can't create namespace "": only global namespace can have empty name}} + +test namespace-15.1 {Tcl_FindNamespace, absolute name found} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_delete { + namespace eval test_ns_delete2 {} + proc cmd {args} {namespace current} + } + list [namespace delete ::test_ns_delete::test_ns_delete2] \ + [namespace children ::test_ns_delete] +} {{} {}} +test namespace-15.2 {Tcl_FindNamespace, absolute name not found} { + list [catch {namespace delete ::test_ns_delete::test_ns_delete2} msg] $msg +} {1 {unknown namespace "::test_ns_delete::test_ns_delete2" in namespace delete command}} +test namespace-15.3 {Tcl_FindNamespace, relative name found} { + namespace eval test_ns_delete { + namespace eval test_ns_delete2 {} + namespace eval test_ns_delete3 {} + list [namespace delete test_ns_delete2] \ + [namespace children [namespace current]] + } +} {{} ::test_ns_delete::test_ns_delete3} +test namespace-15.4 {Tcl_FindNamespace, relative name not found} { + namespace eval test_ns_delete2 {} + namespace eval test_ns_delete { + list [catch {namespace delete test_ns_delete2} msg] $msg + } +} {1 {unknown namespace "test_ns_delete2" in namespace delete command}} + +test namespace-16.1 {Tcl_FindCommand, absolute name found} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 { + proc cmd {args} {return "[namespace current]::cmd: $args"} + variable v "::test_ns_1::cmd" + eval $v one + } +} {::test_ns_1::cmd: one} +test namespace-16.2 {Tcl_FindCommand, absolute name found} { + eval $test_ns_1::v two +} {::test_ns_1::cmd: two} +test namespace-16.3 {Tcl_FindCommand, absolute name not found} { + namespace eval test_ns_1 { + variable v2 "::test_ns_1::ladidah" + list [catch {eval $v2} msg] $msg + } +} {1 {invalid command name "::test_ns_1::ladidah"}} + +# save the "unknown" proc, which is redefined by the following two tests +catch {rename unknown unknown.old} +proc unknown {args} { + return "unknown: $args" +} +test namespace-16.4 {Tcl_FindCommand, absolute name and TCL_GLOBAL_ONLY} { + ::test_ns_1::foobar x y z +} {unknown: ::test_ns_1::foobar x y z} +test namespace-16.5 {Tcl_FindCommand, absolute name and TCL_GLOBAL_ONLY} { + ::foobar 1 2 3 4 5 +} {unknown: ::foobar 1 2 3 4 5} +test namespace-16.6 {Tcl_FindCommand, relative name and TCL_GLOBAL_ONLY} { + test_ns_1::foobar x y z +} {unknown: test_ns_1::foobar x y z} +test namespace-16.7 {Tcl_FindCommand, relative name and TCL_GLOBAL_ONLY} { + foobar 1 2 3 4 5 +} {unknown: foobar 1 2 3 4 5} +# restore the "unknown" proc saved previously +catch {rename unknown {}} +catch {rename unknown.old unknown} + +test namespace-16.8 {Tcl_FindCommand, relative name found} { + namespace eval test_ns_1 { + cmd a b c + } +} {::test_ns_1::cmd: a b c} +test namespace-16.9 {Tcl_FindCommand, relative name found} { + catch {rename cmd2 {}} + proc cmd2 {args} {return "[namespace current]::cmd2: $args"} + namespace eval test_ns_1 { + cmd2 a b c + } +} {::::cmd2: a b c} +test namespace-16.10 {Tcl_FindCommand, relative name found, only look in current then global ns} { + namespace eval test_ns_1 { + proc cmd2 {args} { + return "[namespace current]::cmd2 in test_ns_1: $args" + } + namespace eval test_ns_12 { + cmd2 a b c + } + } +} {::::cmd2: a b c} +test namespace-16.11 {Tcl_FindCommand, relative name not found} { + namespace eval test_ns_1 { + list [catch {cmd3 a b c} msg] $msg + } +} {1 {invalid command name "cmd3"}} + +catch {unset x} +test namespace-17.1 {Tcl_FindNamespaceVar, absolute name found} { + catch {eval namespace delete [namespace children :: test_ns_*]} + set x 314159 + namespace eval test_ns_1 { + set ::x + } +} {314159} +test namespace-17.2 {Tcl_FindNamespaceVar, absolute name found} { + namespace eval test_ns_1 { + variable x 777 + set ::test_ns_1::x + } +} {777} +test namespace-17.3 {Tcl_FindNamespaceVar, absolute name found} { + namespace eval test_ns_1 { + namespace eval test_ns_2 { + variable x 1111 + } + set ::test_ns_1::test_ns_2::x + } +} {1111} +test namespace-17.4 {Tcl_FindNamespaceVar, absolute name not found} { + namespace eval test_ns_1 { + namespace eval test_ns_2 { + variable x 1111 + } + list [catch {set ::test_ns_1::test_ns_2::y} msg] $msg + } +} {1 {can't read "::test_ns_1::test_ns_2::y": no such variable}} +test namespace-17.5 {Tcl_FindNamespaceVar, absolute name and TCL_GLOBAL_ONLY} { + namespace eval test_ns_1 { + namespace eval test_ns_3 { + variable ::test_ns_1::test_ns_2::x 2222 + } + } + set ::test_ns_1::test_ns_2::x +} {2222} +test namespace-17.6 {Tcl_FindNamespaceVar, relative name found} { + namespace eval test_ns_1 { + set x + } +} {777} +test namespace-17.7 {Tcl_FindNamespaceVar, relative name found} { + namespace eval test_ns_1 { + unset x + set x ;# must be global x now + } +} {314159} +test namespace-17.8 {Tcl_FindNamespaceVar, relative name not found} { + namespace eval test_ns_1 { + list [catch {set wuzzat} msg] $msg + } +} {1 {can't read "wuzzat": no such variable}} +test namespace-17.9 {Tcl_FindNamespaceVar, relative name and TCL_GLOBAL_ONLY} { + namespace eval test_ns_1 { + variable a hello + } + set test_ns_1::a +} {hello} +catch {unset x} + +catch {unset l} +catch {rename foo {}} +test namespace-18.1 {TclResetShadowedCmdRefs, one-level check for command shadowing} { + catch {eval namespace delete [namespace children :: test_ns_*]} + proc foo {} {return "global foo"} + namespace eval test_ns_1 { + proc trigger {} { + return [foo] + } + } + set l "" + lappend l [test_ns_1::trigger] + namespace eval test_ns_1 { + # force invalidation of cached ref to "foo" in proc trigger + proc foo {} {return "foo in test_ns_1"} + } + lappend l [test_ns_1::trigger] + set l +} {{global foo} {foo in test_ns_1}} +test namespace-18.2 {TclResetShadowedCmdRefs, multilevel check for command shadowing} { + namespace eval test_ns_2 { + proc foo {} {return "foo in ::test_ns_2"} + } + namespace eval test_ns_1 { + namespace eval test_ns_2 {} + proc trigger {} { + return [test_ns_2::foo] + } + } + set l "" + lappend l [test_ns_1::trigger] + namespace eval test_ns_1 { + namespace eval test_ns_2 { + # force invalidation of cached ref to "foo" in proc trigger + proc foo {} {return "foo in ::test_ns_1::test_ns_2"} + } + } + lappend l [test_ns_1::trigger] + set l +} {{foo in ::test_ns_2} {foo in ::test_ns_1::test_ns_2}} +catch {unset l} +catch {rename foo {}} + +test namespace-19.1 {GetNamespaceFromObj, global name found} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1::test_ns_2 {} + namespace children ::test_ns_1 +} {::test_ns_1::test_ns_2} +test namespace-19.2 {GetNamespaceFromObj, relative name found} { + namespace eval test_ns_1 { + namespace children test_ns_2 + } +} {} +test namespace-19.3 {GetNamespaceFromObj, name not found} { + namespace eval test_ns_1 { + list [catch {namespace children test_ns_99} msg] $msg + } +} {1 {unknown namespace "test_ns_99" in namespace children command}} +test namespace-19.4 {GetNamespaceFromObj, invalidation of cached ns refs} { + namespace eval test_ns_1 { + proc foo {} { + return [namespace children test_ns_2] + } + list [catch {namespace children test_ns_99} msg] $msg + } + set l {} + lappend l [test_ns_1::foo] + namespace delete test_ns_1::test_ns_2 + namespace eval test_ns_1::test_ns_2::test_ns_3 {} + lappend l [test_ns_1::foo] + set l +} {{} ::test_ns_1::test_ns_2::test_ns_3} + +test namespace-20.1 {Tcl_NamespaceObjCmd, bad subcommand} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace} msg] $msg +} {1 {wrong # args: should be "namespace subcommand ?arg ...?"}} +test namespace-20.2 {Tcl_NamespaceObjCmd, bad subcommand} { + list [catch {namespace wombat {}} msg] $msg +} {1 {bad option "wombat": must be children, code, current, delete, eval, export, forget, import, inscope, origin, parent, qualifiers, tail, or which}} +test namespace-20.3 {Tcl_NamespaceObjCmd, abbreviations are okay} { + namespace ch :: test_ns_* +} {} + +test namespace-21.1 {NamespaceChildrenCmd, no args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1::test_ns_2 {} + expr {[string first ::test_ns_1 [namespace children]] != -1} +} {1} +test namespace-21.2 {NamespaceChildrenCmd, no args} { + namespace eval test_ns_1 { + namespace children + } +} {::test_ns_1::test_ns_2} +test namespace-21.3 {NamespaceChildrenCmd, ns name given} { + namespace children ::test_ns_1 +} {::test_ns_1::test_ns_2} +test namespace-21.4 {NamespaceChildrenCmd, ns name given} { + namespace eval test_ns_1 { + namespace children test_ns_2 + } +} {} +test namespace-21.5 {NamespaceChildrenCmd, too many args} { + namespace eval test_ns_1 { + list [catch {namespace children test_ns_2 xxx yyy} msg] $msg + } +} {1 {wrong # args: should be "namespace children ?name? ?pattern?"}} +test namespace-21.6 {NamespaceChildrenCmd, glob-style pattern given} { + namespace eval test_ns_1::test_ns_foo {} + namespace children test_ns_1 *f* +} {::test_ns_1::test_ns_foo} +test namespace-21.7 {NamespaceChildrenCmd, glob-style pattern given} { + namespace eval test_ns_1::test_ns_foo {} + namespace children test_ns_1 test* +} {::test_ns_1::test_ns_2 ::test_ns_1::test_ns_foo} + +test namespace-22.1 {NamespaceCodeCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace code} msg] $msg \ + [catch {namespace code xxx yyy} msg] $msg +} {1 {wrong # args: should be "namespace code arg"} 1 {wrong # args: should be "namespace code arg"}} +test namespace-22.2 {NamespaceCodeCmd, arg is already scoped value} { + namespace eval test_ns_1 { + proc cmd {} {return "test_ns_1::cmd"} + } + namespace code {namespace inscope ::test_ns_1 cmd} +} {namespace inscope ::test_ns_1 cmd} +test namespace-22.3 {NamespaceCodeCmd, arg is already scoped value} { + namespace code {namespace inscope ::test_ns_1 cmd} +} {namespace inscope ::test_ns_1 cmd} +test namespace-22.4 {NamespaceCodeCmd, in :: namespace} { + namespace code unknown +} {namespace inscope :: unknown} +test namespace-22.5 {NamespaceCodeCmd, in other namespace} { + namespace eval test_ns_1 { + namespace code cmd + } +} {namespace inscope ::test_ns_1 cmd} + +test namespace-23.1 {NamespaceCurrentCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace current xxx} msg] $msg \ + [catch {namespace current xxx yyy} msg] $msg +} {1 {wrong # args: should be "namespace current"} 1 {wrong # args: should be "namespace current"}} +test namespace-23.2 {NamespaceCurrentCmd, at global level} { + namespace current +} {::} +test namespace-23.3 {NamespaceCurrentCmd, in nested ns} { + namespace eval test_ns_1::test_ns_2 { + namespace current + } +} {::test_ns_1::test_ns_2} + +test namespace-24.1 {NamespaceDeleteCmd, no args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace delete +} {} +test namespace-24.2 {NamespaceDeleteCmd, one arg} { + namespace eval test_ns_1::test_ns_2 {} + namespace delete ::test_ns_1 +} {} +test namespace-24.3 {NamespaceDeleteCmd, two args} { + namespace eval test_ns_1::test_ns_2 {} + list [namespace delete ::test_ns_1::test_ns_2] [namespace delete ::test_ns_1] +} {{} {}} +test namespace-24.4 {NamespaceDeleteCmd, unknown ns} { + list [catch {namespace delete ::test_ns_foo} msg] $msg +} {1 {unknown namespace "::test_ns_foo" in namespace delete command}} + +test namespace-25.1 {NamespaceEvalCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace eval} msg] $msg +} {1 {wrong # args: should be "namespace eval name arg ?arg...?"}} +test namespace-25.2 {NamespaceEvalCmd, bad args} { + list [catch {namespace test_ns_1} msg] $msg +} {1 {bad option "test_ns_1": must be children, code, current, delete, eval, export, forget, import, inscope, origin, parent, qualifiers, tail, or which}} +catch {unset v} +test namespace-25.3 {NamespaceEvalCmd, new namespace} { + set v 123 + namespace eval test_ns_1 { + variable v 314159 + proc p {} { + variable v + return $v + } + } + test_ns_1::p +} {314159} +test namespace-25.4 {NamespaceEvalCmd, existing namespace} { + namespace eval test_ns_1 { + proc q {} {return [expr {[p]+1}]} + } + test_ns_1::q +} {314160} +test namespace-25.5 {NamespaceEvalCmd, multiple args} { + namespace eval test_ns_1 "set" "v" +} {314159} +test namespace-25.6 {NamespaceEvalCmd, error in eval'd script} { + list [catch {namespace eval test_ns_1 {xxxx}} msg] $msg $errorInfo +} {1 {invalid command name "xxxx"} {invalid command name "xxxx" + while executing +"xxxx" + (in namespace eval "::test_ns_1" script line 1) + invoked from within +"namespace eval test_ns_1 {xxxx}"}} +catch {unset v} + +test namespace-26.1 {NamespaceExportCmd, no args and new ns} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace export +} {} +test namespace-26.2 {NamespaceExportCmd, just -clear arg} { + namespace export -clear +} {} +test namespace-26.3 {NamespaceExportCmd, pattern can't specify a namespace} { + namespace eval test_ns_1 { + list [catch {namespace export ::zzz} msg] $msg + } +} {1 {invalid export pattern "::zzz": pattern can't specify a namespace}} +test namespace-26.4 {NamespaceExportCmd, one pattern} { + namespace eval test_ns_1 { + namespace export cmd1 + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + proc cmd3 {args} {return "cmd3: $args"} + proc cmd4 {args} {return "cmd4: $args"} + } + namespace eval test_ns_2 { + namespace import ::test_ns_1::* + } + list [info commands test_ns_2::*] [test_ns_2::cmd1 hello] +} {::test_ns_2::cmd1 {cmd1: hello}} +test namespace-26.5 {NamespaceExportCmd, sequence of patterns, patterns accumulate} { + namespace eval test_ns_1 { + namespace export cmd1 cmd3 + } + namespace eval test_ns_2 { + namespace import -force ::test_ns_1::* + } + list [info commands test_ns_2::*] [test_ns_2::cmd3 hello] +} {{::test_ns_2::cmd1 ::test_ns_2::cmd3} {cmd3: hello}} +test namespace-26.6 {NamespaceExportCmd, no patterns means return export list} { + namespace eval test_ns_1 { + namespace export + } +} {cmd1 cmd1 cmd3} +test namespace-26.7 {NamespaceExportCmd, -clear resets export list} { + namespace eval test_ns_1 { + namespace export -clear cmd4 + } + namespace eval test_ns_2 { + namespace import ::test_ns_1::* + } + list [info commands test_ns_2::*] [test_ns_2::cmd4 hello] +} {{::test_ns_2::cmd4 ::test_ns_2::cmd1 ::test_ns_2::cmd3} {cmd4: hello}} + +test namespace-27.1 {NamespaceForgetCmd, no args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace forget +} {} +test namespace-27.2 {NamespaceForgetCmd, args must be valid namespaces} { + list [catch {namespace forget ::test_ns_1::xxx} msg] $msg +} {1 {unknown namespace in namespace forget pattern "::test_ns_1::xxx"}} +test namespace-27.3 {NamespaceForgetCmd, arg is forgotten} { + namespace eval test_ns_1 { + namespace export cmd* + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + } + namespace eval test_ns_2 { + namespace import ::test_ns_1::* + namespace forget ::test_ns_1::cmd1 + } + info commands ::test_ns_2::* +} {::test_ns_2::cmd2} + +test namespace-28.1 {NamespaceImportCmd, no args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace import +} {} +test namespace-28.2 {NamespaceImportCmd, no args and just "-force"} { + namespace import -force +} {} +test namespace-28.3 {NamespaceImportCmd, arg is imported} { + namespace eval test_ns_1 { + namespace export cmd2 + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + } + namespace eval test_ns_2 { + namespace import ::test_ns_1::* + namespace forget ::test_ns_1::cmd1 + } + info commands test_ns_2::* +} {::test_ns_2::cmd2} + +test namespace-29.1 {NamespaceInscopeCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace inscope} msg] $msg +} {1 {wrong # args: should be "namespace inscope name arg ?arg...?"}} +test namespace-29.2 {NamespaceInscopeCmd, bad args} { + list [catch {namespace inscope ::} msg] $msg +} {1 {wrong # args: should be "namespace inscope name arg ?arg...?"}} +test namespace-29.3 {NamespaceInscopeCmd, specified ns must exist} { + list [catch {namespace inscope test_ns_1 {set v}} msg] $msg +} {1 {unknown namespace "test_ns_1" in inscope namespace command}} +test namespace-29.4 {NamespaceInscopeCmd, simple case} { + namespace eval test_ns_1 { + variable v 747 + proc cmd {args} { + variable v + return "[namespace current]::cmd: v=$v, args=$args" + } + } + namespace inscope test_ns_1 cmd +} {::test_ns_1::cmd: v=747, args=} +test namespace-29.5 {NamespaceInscopeCmd, has lappend semantics} { + list [namespace inscope test_ns_1 cmd x y z] \ + [namespace eval test_ns_1 [concat cmd [list x y z]]] +} {{::test_ns_1::cmd: v=747, args=x y z} {::test_ns_1::cmd: v=747, args=x y z}} + +test namespace-30.1 {NamespaceOriginCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace origin} msg] $msg +} {1 {wrong # args: should be "namespace origin name"}} +test namespace-30.2 {NamespaceOriginCmd, bad args} { + list [catch {namespace origin x y} msg] $msg +} {1 {wrong # args: should be "namespace origin name"}} +test namespace-30.3 {NamespaceOriginCmd, command not found} { + list [catch {namespace origin fred} msg] $msg +} {1 {invalid command name "fred"}} +test namespace-30.4 {NamespaceOriginCmd, command isn't imported} { + namespace origin set +} {::set} +test namespace-30.5 {NamespaceOriginCmd, imported command} { + namespace eval test_ns_1 { + namespace export cmd* + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + } + namespace eval test_ns_2 { + namespace export * + namespace import ::test_ns_1::* + proc p {} {} + } + namespace eval test_ns_3 { + namespace import ::test_ns_2::* + list [namespace origin foreach] \ + [namespace origin p] \ + [namespace origin cmd1] \ + [namespace origin ::test_ns_2::cmd2] + } +} {::foreach ::test_ns_2::p ::test_ns_1::cmd1 ::test_ns_1::cmd2} + +test namespace-31.1 {NamespaceParentCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace parent a b} msg] $msg +} {1 {wrong # args: should be "namespace parent ?name?"}} +test namespace-31.2 {NamespaceParentCmd, no args} { + namespace parent +} {} +test namespace-31.3 {NamespaceParentCmd, namespace specified} { + namespace eval test_ns_1 { + namespace eval test_ns_2 { + namespace eval test_ns_3 {} + } + } + list [namespace parent ::] \ + [namespace parent test_ns_1::test_ns_2] \ + [namespace eval test_ns_1::test_ns_2::test_ns_3 {namespace parent ::test_ns_1::test_ns_2}] +} {{} ::test_ns_1 ::test_ns_1} +test namespace-31.4 {NamespaceParentCmd, bad namespace specified} { + list [catch {namespace parent test_ns_1::test_ns_foo} msg] $msg +} {1 {unknown namespace "test_ns_1::test_ns_foo" in namespace parent command}} + +test namespace-32.1 {NamespaceQualifiersCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace qualifiers} msg] $msg +} {1 {wrong # args: should be "namespace qualifiers string"}} +test namespace-32.2 {NamespaceQualifiersCmd, bad args} { + list [catch {namespace qualifiers x y} msg] $msg +} {1 {wrong # args: should be "namespace qualifiers string"}} +test namespace-32.3 {NamespaceQualifiersCmd, simple name} { + namespace qualifiers foo +} {} +test namespace-32.4 {NamespaceQualifiersCmd, leading ::} { + namespace qualifiers ::x::y::z +} {::x::y} +test namespace-32.5 {NamespaceQualifiersCmd, no leading ::} { + namespace qualifiers a::b +} {a} +test namespace-32.6 {NamespaceQualifiersCmd, :: argument} { + namespace qualifiers :: +} {} +test namespace-32.7 {NamespaceQualifiersCmd, odd number of :s} { + namespace qualifiers ::::: +} {} +test namespace-32.8 {NamespaceQualifiersCmd, odd number of :s} { + namespace qualifiers foo::: +} {foo} + +test namespace-33.1 {NamespaceTailCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace tail} msg] $msg +} {1 {wrong # args: should be "namespace tail string"}} +test namespace-33.2 {NamespaceTailCmd, bad args} { + list [catch {namespace tail x y} msg] $msg +} {1 {wrong # args: should be "namespace tail string"}} +test namespace-33.3 {NamespaceTailCmd, simple name} { + namespace tail foo +} {foo} +test namespace-33.4 {NamespaceTailCmd, leading ::} { + namespace tail ::x::y::z +} {z} +test namespace-33.5 {NamespaceTailCmd, no leading ::} { + namespace tail a::b +} {b} +test namespace-33.6 {NamespaceTailCmd, :: argument} { + namespace tail :: +} {} +test namespace-33.7 {NamespaceTailCmd, odd number of :s} { + namespace tail ::::: +} {} +test namespace-33.8 {NamespaceTailCmd, odd number of :s} { + namespace tail foo::: +} {} + +test namespace-34.1 {NamespaceWhichCmd, bad args} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {namespace which} msg] $msg +} {1 {wrong # args: should be "namespace which ?-command? ?-variable? name"}} +test namespace-34.2 {NamespaceWhichCmd, bad args} { + list [catch {namespace which -fred} msg] $msg +} {1 {wrong # args: should be "namespace which ?-command? ?-variable? name"}} +test namespace-34.3 {NamespaceWhichCmd, bad args} { + list [catch {namespace which -command} msg] $msg +} {1 {wrong # args: should be "namespace which ?-command? ?-variable? name"}} +test namespace-34.4 {NamespaceWhichCmd, bad args} { + list [catch {namespace which a b} msg] $msg +} {1 {wrong # args: should be "namespace which ?-command? ?-variable? name"}} +test namespace-34.5 {NamespaceWhichCmd, command lookup} { + namespace eval test_ns_1 { + namespace export cmd* + variable v1 111 + proc cmd1 {args} {return "cmd1: $args"} + proc cmd2 {args} {return "cmd2: $args"} + } + namespace eval test_ns_2 { + namespace export * + namespace import ::test_ns_1::* + variable v2 222 + proc p {} {} + } + namespace eval test_ns_3 { + namespace import ::test_ns_2::* + variable v3 333 + list [namespace which -command foreach] \ + [namespace which -command p] \ + [namespace which -command cmd1] \ + [namespace which -command ::test_ns_2::cmd2] \ + [catch {namespace which -command ::test_ns_2::noSuchCmd} msg] $msg + } +} {::foreach ::test_ns_3::p ::test_ns_3::cmd1 ::test_ns_2::cmd2 0 {}} +test namespace-34.6 {NamespaceWhichCmd, -command is default} { + namespace eval test_ns_3 { + list [namespace which foreach] \ + [namespace which p] \ + [namespace which cmd1] \ + [namespace which ::test_ns_2::cmd2] + } +} {::foreach ::test_ns_3::p ::test_ns_3::cmd1 ::test_ns_2::cmd2} +test namespace-34.7 {NamespaceWhichCmd, variable lookup} { + namespace eval test_ns_3 { + list [namespace which -variable env] \ + [namespace which -variable v3] \ + [namespace which -variable ::test_ns_2::v2] \ + [catch {namespace which -variable ::test_ns_2::noSuchVar} msg] $msg + } +} {::env ::test_ns_3::v3 ::test_ns_2::v2 0 {}} + +test namespace-35.1 {FreeNsNameInternalRep, resulting ref count > 0} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 { + proc p {} { + namespace delete [namespace current] + return [namespace current] + } + } + test_ns_1::p +} {::test_ns_1} +test namespace-35.2 {FreeNsNameInternalRep, resulting ref count == 0} { + namespace eval test_ns_1 { + proc q {} { + return [namespace current] + } + } + list [test_ns_1::q] \ + [namespace delete test_ns_1] \ + [catch {test_ns_1::q} msg] $msg +} {::test_ns_1 {} 1 {invalid command name "test_ns_1::q"}} + +catch {unset x} +catch {unset y} +test namespace-36.1 {DupNsNameInternalRep} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 {} + set x "::test_ns_1" + list [namespace parent $x] [set y $x] [namespace parent $y] +} {:: ::test_ns_1 ::} +catch {unset x} +catch {unset y} + +test namespace-37.1 {SetNsNameFromAny, ns name found} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1::test_ns_2 {} + namespace eval test_ns_1 { + namespace children ::test_ns_1 + } +} {::test_ns_1::test_ns_2} +test namespace-37.2 {SetNsNameFromAny, ns name not found} { + namespace eval test_ns_1 { + list [catch {namespace children ::test_ns_1::test_ns_foo} msg] $msg + } +} {1 {unknown namespace "::test_ns_1::test_ns_foo" in namespace children command}} + +test namespace-38.1 {UpdateStringOfNsName} { + catch {eval namespace delete [namespace children :: test_ns_*]} + ;# Tcl_NamespaceObjCmd calls UpdateStringOfNsName to get subcmd name + list [namespace eval {} {namespace current}] \ + [namespace eval {} {namespace current}] +} {:: ::} + +catch {rename cmd1 {}} +catch {unset l} +catch {unset msg} +catch {unset trigger} +eval namespace delete [namespace children :: test_ns_*] diff --git a/tests/obj.test b/tests/obj.test new file mode 100644 index 0000000..08f230b --- /dev/null +++ b/tests/obj.test @@ -0,0 +1,496 @@ +# Functionality covered: this file contains a collection of tests for the +# procedures in tclObj.c that implement Tcl's basic type support and the +# type managers for the types boolean, double, and integer. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# @(#) obj.test 1.12 97/10/31 17:23:23 + +if {[info commands testobj] == {}} { + puts "This application hasn't been compiled with the \"testobj\"" + puts "command, so I can't test the Tcl type and object support." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +test obj-1.1 {Tcl_AppendAllObjTypes, and InitTypeTable, Tcl_RegisterObjType} { + set r 1 + foreach {t} {list boolean cmdName bytecode string int double} { + set first [string first $t [testobj types]] + set r [expr {$r && ($first != -1)}] + } + set result $r +} {1} + +test obj-2.1 {Tcl_GetObjType error} { + list [testintobj set 1 0] [catch {testobj convert 1 foo} msg] $msg +} {0 1 {no type foo found}} +test obj-2.2 {Tcl_GetObjType and Tcl_ConvertToType} { + set result "" + lappend result [testobj freeallvars] + lappend result [testintobj set 1 12] + lappend result [testobj convert 1 double] + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 12 12 double 3} + +test obj-3.1 {Tcl_ConvertToType error} { + list [testdoubleobj set 1 12.34] [catch {testobj convert 1 int} msg] $msg +} {12.34 1 {expected integer but got "12.34"}} +test obj-3.2 {Tcl_ConvertToType error, "empty string" object} { + list [testobj newobj 1] [catch {testobj convert 1 int} msg] $msg +} {{} 1 {expected integer but got ""}} + +test obj-4.1 {Tcl_NewObj and AllocateFreeObjects} { + set result "" + lappend result [testobj freeallvars] + lappend result [testobj newobj 1] + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} {} string 2} + +test obj-5.1 {Tcl_FreeObj} { + set result "" + lappend result [testintobj set 1 12345] + lappend result [testobj freeallvars] + lappend result [catch {testintobj get 1} msg] + lappend result $msg +} {12345 {} 1 {variable 1 is unset (NULL)}} + +test obj-6.1 {Tcl_DuplicateObj, object has internal rep} { + set result "" + lappend result [testobj freeallvars] + lappend result [testintobj set 1 47] + lappend result [testobj duplicate 1 2] + lappend result [testintobj get 2] + lappend result [testobj refcount 1] + lappend result [testobj refcount 2] +} {{} 47 47 47 2 3} +test obj-6.2 {Tcl_DuplicateObj, "empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testobj newobj 1] + lappend result [testobj duplicate 1 2] + lappend result [testintobj get 2] + lappend result [testobj refcount 1] + lappend result [testobj refcount 2] +} {{} {} {} {} 2 3} + +test obj-7.1 {Tcl_GetStringFromObj, return existing string rep} { + set result "" + lappend result [testintobj set 1 47] + lappend result [testintobj get 1] +} {47 47} +test obj-7.2 {Tcl_GetStringFromObj, "empty string" object} { + set result "" + lappend result [testobj newobj 1] + lappend result [teststringobj append 1 abc -1] + lappend result [teststringobj get 1] +} {{} abc abc} +test obj-7.3 {Tcl_GetStringFromObj, returns string internal rep (DString)} { + set result "" + lappend result [teststringobj set 1 xyz] + lappend result [teststringobj append 1 abc -1] + lappend result [teststringobj get 1] +} {xyz xyzabc xyzabc} +test obj-7.4 {Tcl_GetStringFromObj, recompute string rep from internal rep} { + set result "" + lappend result [testintobj set 1 77] + lappend result [testintobj mult10 1] + lappend result [teststringobj get 1] +} {77 770 770} + +test obj-8.1 {Tcl_NewBooleanObj} { + set result "" + lappend result [testobj freeallvars] + lappend result [testbooleanobj set 1 0] + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 0 boolean 2} + +test obj-9.1 {Tcl_SetBooleanObj, existing "empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testobj newobj 1] + lappend result [testbooleanobj set 1 0] ;# makes existing obj boolean + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} {} 0 boolean 2} +test obj-9.2 {Tcl_SetBooleanObj, existing non-"empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testintobj set 1 98765] + lappend result [testbooleanobj set 1 1] ;# makes existing obj boolean + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 98765 1 boolean 2} + +test obj-10.1 {Tcl_GetBooleanFromObj, existing boolean object} { + set result "" + lappend result [testbooleanobj set 1 1] + lappend result [testbooleanobj not 1] ;# gets existing boolean rep +} {1 0} +test obj-10.2 {Tcl_GetBooleanFromObj, convert to boolean} { + set result "" + lappend result [testintobj set 1 47] + lappend result [testbooleanobj not 1] ;# must convert to bool + lappend result [testobj type 1] +} {47 0 boolean} +test obj-10.3 {Tcl_GetBooleanFromObj, error converting to boolean} { + set result "" + lappend result [teststringobj set 1 abc] + lappend result [catch {testbooleanobj not 1} msg] + lappend result $msg +} {abc 1 {expected boolean value but got "abc"}} +test obj-10.4 {Tcl_GetBooleanFromObj, error converting from "empty string"} { + set result "" + lappend result [testobj newobj 1] + lappend result [catch {testbooleanobj not 1} msg] + lappend result $msg +} {{} 1 {expected boolean value but got ""}} + +test obj-11.1 {DupBooleanInternalRep} { + set result "" + lappend result [testbooleanobj set 1 1] + lappend result [testobj duplicate 1 2] ;# uses DupBooleanInternalRep + lappend result [testbooleanobj get 2] +} {1 1 1} + +test obj-12.1 {SetBooleanFromAny, int to boolean special case} { + set result "" + lappend result [testintobj set 1 1234] + lappend result [testbooleanobj not 1] ;# converts with SetBooleanFromAny + lappend result [testobj type 1] +} {1234 0 boolean} +test obj-12.2 {SetBooleanFromAny, double to boolean special case} { + set result "" + lappend result [testdoubleobj set 1 3.14159] + lappend result [testbooleanobj not 1] ;# converts with SetBooleanFromAny + lappend result [testobj type 1] +} {3.14159 0 boolean} +test obj-12.3 {SetBooleanFromAny, special case strings representing booleans} { + set result "" + foreach s {yes no true false on off} { + teststringobj set 1 $s + lappend result [testbooleanobj not 1] + } + lappend result [testobj type 1] +} {0 1 0 1 0 1 boolean} +test obj-12.4 {SetBooleanFromAny, recompute string rep then parse it} { + set result "" + lappend result [testintobj set 1 456] + lappend result [testintobj div10 1] + lappend result [testbooleanobj not 1] ;# converts with SetBooleanFromAny + lappend result [testobj type 1] +} {456 45 0 boolean} +test obj-12.5 {SetBooleanFromAny, error parsing string} { + set result "" + lappend result [teststringobj set 1 abc] + lappend result [catch {testbooleanobj not 1} msg] + lappend result $msg +} {abc 1 {expected boolean value but got "abc"}} +test obj-12.6 {SetBooleanFromAny, error parsing string} { + set result "" + lappend result [teststringobj set 1 x1.0] + lappend result [catch {testbooleanobj not 1} msg] + lappend result $msg +} {x1.0 1 {expected boolean value but got "x1.0"}} +test obj-12.7 {SetBooleanFromAny, error converting from "empty string"} { + set result "" + lappend result [testobj newobj 1] + lappend result [catch {testbooleanobj not 1} msg] + lappend result $msg +} {{} 1 {expected boolean value but got ""}} + +test obj-13.1 {UpdateStringOfBoolean} { + set result "" + lappend result [testbooleanobj set 1 0] + lappend result [testbooleanobj not 1] + lappend result [testbooleanobj get 1] ;# must update string rep +} {0 1 1} + +test obj-14.1 {Tcl_NewDoubleObj} { + set result "" + lappend result [testobj freeallvars] + lappend result [testdoubleobj set 1 3.1459] + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 3.1459 double 2} + +test obj-15.1 {Tcl_SetDoubleObj, existing "empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testobj newobj 1] + lappend result [testdoubleobj set 1 0.123] ;# makes existing obj boolean + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} {} 0.123 double 2} +test obj-15.2 {Tcl_SetDoubleObj, existing non-"empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testintobj set 1 98765] + lappend result [testdoubleobj set 1 27.56] ;# makes existing obj double + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 98765 27.56 double 2} + +test obj-16.1 {Tcl_GetDoubleFromObj, existing double object} { + set result "" + lappend result [testdoubleobj set 1 16.1] + lappend result [testdoubleobj mult10 1] ;# gets existing double rep +} {16.1 161.0} +test obj-16.2 {Tcl_GetDoubleFromObj, convert to double} { + set result "" + lappend result [testintobj set 1 477] + lappend result [testdoubleobj div10 1] ;# must convert to bool + lappend result [testobj type 1] +} {477 47.7 double} +test obj-16.3 {Tcl_GetDoubleFromObj, error converting to double} { + set result "" + lappend result [teststringobj set 1 abc] + lappend result [catch {testdoubleobj mult10 1} msg] + lappend result $msg +} {abc 1 {expected floating-point number but got "abc"}} +test obj-16.4 {Tcl_GetDoubleFromObj, error converting from "empty string"} { + set result "" + lappend result [testobj newobj 1] + lappend result [catch {testdoubleobj div10 1} msg] + lappend result $msg +} {{} 1 {expected floating-point number but got ""}} + +test obj-17.1 {DupDoubleInternalRep} { + set result "" + lappend result [testdoubleobj set 1 17.1] + lappend result [testobj duplicate 1 2] ;# uses DupDoubleInternalRep + lappend result [testdoubleobj get 2] +} {17.1 17.1 17.1} + +test obj-18.1 {SetDoubleFromAny, int to double special case} { + set result "" + lappend result [testintobj set 1 1234] + lappend result [testdoubleobj mult10 1] ;# converts with SetDoubleFromAny + lappend result [testobj type 1] +} {1234 12340.0 double} +test obj-18.2 {SetDoubleFromAny, boolean to double special case} { + set result "" + lappend result [testbooleanobj set 1 1] + lappend result [testdoubleobj mult10 1] ;# converts with SetDoubleFromAny + lappend result [testobj type 1] +} {1 10.0 double} +test obj-18.3 {SetDoubleFromAny, recompute string rep then parse it} { + set result "" + lappend result [testintobj set 1 456] + lappend result [testintobj div10 1] + lappend result [testdoubleobj mult10 1] ;# converts with SetDoubleFromAny + lappend result [testobj type 1] +} {456 45 450.0 double} +test obj-18.4 {SetDoubleFromAny, error parsing string} { + set result "" + lappend result [teststringobj set 1 abc] + lappend result [catch {testdoubleobj mult10 1} msg] + lappend result $msg +} {abc 1 {expected floating-point number but got "abc"}} +test obj-18.5 {SetDoubleFromAny, error parsing string} { + set result "" + lappend result [teststringobj set 1 x1.0] + lappend result [catch {testdoubleobj mult10 1} msg] + lappend result $msg +} {x1.0 1 {expected floating-point number but got "x1.0"}} +test obj-18.6 {SetDoubleFromAny, error converting from "empty string"} { + set result "" + lappend result [testobj newobj 1] + lappend result [catch {testdoubleobj div10 1} msg] + lappend result $msg +} {{} 1 {expected floating-point number but got ""}} + +test obj-19.1 {UpdateStringOfDouble} { + set result "" + lappend result [testdoubleobj set 1 3.14159] + lappend result [testdoubleobj mult10 1] + lappend result [testdoubleobj get 1] ;# must update string rep +} {3.14159 31.4159 31.4159} + +test obj-20.1 {Tcl_NewIntObj} { + set result "" + lappend result [testobj freeallvars] + lappend result [testintobj set 1 55] + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 55 int 2} + +test obj-21.1 {Tcl_SetIntObj, existing "empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testobj newobj 1] + lappend result [testintobj set 1 77] ;# makes existing obj int + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} {} 77 int 2} +test obj-21.2 {Tcl_SetIntObj, existing non-"empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testdoubleobj set 1 12.34] + lappend result [testintobj set 1 77] ;# makes existing obj int + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 12.34 77 int 2} + +test obj-22.1 {Tcl_GetIntFromObj, existing int object} { + set result "" + lappend result [testintobj set 1 22] + lappend result [testintobj mult10 1] ;# gets existing int rep +} {22 220} +test obj-22.2 {Tcl_GetIntFromObj, convert to int} { + set result "" + lappend result [testintobj set 1 477] + lappend result [testintobj div10 1] ;# must convert to bool + lappend result [testobj type 1] +} {477 47 int} +test obj-22.3 {Tcl_GetIntFromObj, error converting to int} { + set result "" + lappend result [teststringobj set 1 abc] + lappend result [catch {testintobj mult10 1} msg] + lappend result $msg +} {abc 1 {expected integer but got "abc"}} +test obj-22.4 {Tcl_GetIntFromObj, error converting from "empty string"} { + set result "" + lappend result [testobj newobj 1] + lappend result [catch {testintobj div10 1} msg] + lappend result $msg +} {{} 1 {expected integer but got ""}} +test obj-22.5 {Tcl_GetIntFromObj, integer too large to represent as non-long error} {nonPortable} { + set result "" + lappend result [testobj newobj 1] + lappend result [testintobj inttoobigtest 1] +} {{} 1} + +test obj-23.1 {DupIntInternalRep} { + set result "" + lappend result [testintobj set 1 23] + lappend result [testobj duplicate 1 2] ;# uses DupIntInternalRep + lappend result [testintobj get 2] +} {23 23 23} + +test obj-24.1 {SetIntFromAny, int to int special case} { + set result "" + lappend result [testintobj set 1 1234] + lappend result [testintobj mult10 1] ;# converts with SetIntFromAny + lappend result [testobj type 1] +} {1234 12340 int} +test obj-24.2 {SetIntFromAny, boolean to int special case} { + set result "" + lappend result [testbooleanobj set 1 1] + lappend result [testintobj mult10 1] ;# converts with SetIntFromAny + lappend result [testobj type 1] +} {1 10 int} +test obj-24.3 {SetIntFromAny, recompute string rep then parse it} { + set result "" + lappend result [testintobj set 1 456] + lappend result [testintobj div10 1] + lappend result [testintobj mult10 1] ;# converts with SetIntFromAny + lappend result [testobj type 1] +} {456 45 450 int} +test obj-24.4 {SetIntFromAny, error parsing string} { + set result "" + lappend result [teststringobj set 1 abc] + lappend result [catch {testintobj mult10 1} msg] + lappend result $msg +} {abc 1 {expected integer but got "abc"}} +test obj-24.5 {SetIntFromAny, error parsing string} { + set result "" + lappend result [teststringobj set 1 x17] + lappend result [catch {testintobj mult10 1} msg] + lappend result $msg +} {x17 1 {expected integer but got "x17"}} +test obj-24.6 {SetIntFromAny, integer too large} {nonPortable} { + set result "" + lappend result [teststringobj set 1 123456789012345678901] + lappend result [catch {testintobj mult10 1} msg] + lappend result $msg +} {123456789012345678901 1 {integer value too large to represent}} +test obj-24.7 {SetIntFromAny, error converting from "empty string"} { + set result "" + lappend result [testobj newobj 1] + lappend result [catch {testintobj div10 1} msg] + lappend result $msg +} {{} 1 {expected integer but got ""}} + +test obj-25.1 {UpdateStringOfInt} { + set result "" + lappend result [testintobj set 1 512] + lappend result [testintobj mult10 1] + lappend result [testintobj get 1] ;# must update string rep +} {512 5120 5120} + +test obj-26.1 {Tcl_NewLongObj} { + set result "" + lappend result [testobj freeallvars] + testintobj setmaxlong 1 + lappend result [testintobj ismaxlong 1] + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 1 int 1} + +test obj-27.1 {Tcl_SetLongObj, existing "empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testobj newobj 1] + lappend result [testintobj setlong 1 77] ;# makes existing obj long int + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} {} 77 int 2} +test obj-27.2 {Tcl_SetLongObj, existing non-"empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testdoubleobj set 1 12.34] + lappend result [testintobj setlong 1 77] ;# makes existing obj long int + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 12.34 77 int 2} + +test obj-28.1 {Tcl_GetLongFromObj, existing long integer object} { + set result "" + lappend result [testintobj setlong 1 22] + lappend result [testintobj mult10 1] ;# gets existing long int rep +} {22 220} +test obj-28.2 {Tcl_GetLongFromObj, convert to long} { + set result "" + lappend result [testintobj setlong 1 477] + lappend result [testintobj div10 1] ;# must convert to bool + lappend result [testobj type 1] +} {477 47 int} +test obj-28.3 {Tcl_GetLongFromObj, error converting to long integer} { + set result "" + lappend result [teststringobj set 1 abc] + lappend result [catch {testintobj ismaxlong 1} msg] ;# cvts to long int + lappend result $msg +} {abc 1 {expected integer but got "abc"}} +test obj-28.4 {Tcl_GetLongFromObj, error converting from "empty string"} { + set result "" + lappend result [testobj newobj 1] + lappend result [catch {testintobj ismaxlong 1} msg] ;# cvts to long int + lappend result $msg +} {{} 1 {expected integer but got ""}} + +test obj-29.1 {Ref counting and object deletion, simple types} { + set result "" + lappend result [testobj freeallvars] + lappend result [testintobj set 1 1024] + lappend result [testobj assign 1 2] ;# vars 1 and 2 share the int obj + lappend result [testobj type 2] + lappend result [testobj refcount 1] + lappend result [testobj refcount 2] + lappend result [testbooleanobj set 2 0] ;# must copy on write, now 2 objs + lappend result [testobj type 2] + lappend result [testobj refcount 1] + lappend result [testobj refcount 2] +} {{} 1024 1024 int 4 4 0 boolean 3 2} + +testobj freeallvars diff --git a/tests/opt.test b/tests/opt.test new file mode 100644 index 0000000..0b35b76 --- /dev/null +++ b/tests/opt.test @@ -0,0 +1,255 @@ +# Package covered: opt0.1/optparse.tcl +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) opt.test 1.2 97/08/20 15:57:18 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# the package we are going to test +package require opt 0.1 + +# we are using implementation specifics to test the package + + +#### functions tests ##### + +set n $::tcl::OptDescN + +test opt-1.1 {OptKeyRegister / check that auto allocation is skipping existing keys} { + list [::tcl::OptKeyRegister {} $n] [::tcl::OptKeyRegister {} [expr $n+1]] [::tcl::OptKeyRegister {}] +} "$n [expr $n+1] [expr $n+2]" + +test opt-2.1 {OptKeyDelete} { + list [::tcl::OptKeyRegister {} testkey] [::tcl::OptKeyDelete testkey] \ + [catch {::tcl::OptKeyDelete testkey} msg] $msg; +} {testkey {} 1 {can't unset "OptDesc(testkey)": no such element in array}} + + +test opt-3.1 {OptParse / temp key is removed} { + set n $::tcl::OptDescN + set prev [array names ::tcl::OptDesc] + ::tcl::OptKeyRegister {} $n + list [info exists ::tcl::OptDesc($n)]\ + [::tcl::OptKeyDelete $n]\ + [::tcl::OptParse {{-foo}} {}]\ + [info exists ::tcl::OptDesc($n)]\ + [expr {"[lsort $prev]"=="[lsort [array names ::tcl::OptDesc]]"}] +} {1 {} {} 0 1} + + +test opt-3.2 {OptParse / temp key is removed even on errors} { + set n $::tcl::OptDescN + catch {::tcl::OptKeyDelete $n} + list [catch {::tcl::OptParse {{-foo}} {-blah}}] \ + [info exists ::tcl::OptDesc($n)] +} {1 0} + +test opt-4.1 {OptProc} { + ::tcl::OptProc optTest {} {} + optTest ; + ::tcl::OptKeyDelete optTest +} {} + + +test opt-5.1 {OptProcArgGiven} { + ::tcl::OptProc optTest {{-foo}} { + if {[::tcl::OptProcArgGiven "-foo"]} { + return 1 + } else { + return 0 + } + } + list [optTest] [optTest -f] [optTest -F] [optTest -fOO] +} {0 1 1 1} + +test opt-6.1 {OptKeyParse} { + ::tcl::OptKeyRegister {} test; + list [catch {::tcl::OptKeyParse test {-help}} msg] $msg +} {1 {Usage information: + Var/FlagName Type Value Help + ------------ ---- ----- ---- + ( -help gives this help )}} + + +test opt-7.1 {OptCheckType} { + list \ + [::tcl::OptCheckType 23 int] \ + [::tcl::OptCheckType 23 float] \ + [::tcl::OptCheckType true boolean] \ + [::tcl::OptCheckType "-blah" any] \ + [::tcl::OptCheckType {a b c} list] \ + [::tcl::OptCheckType maYbe choice {yes maYbe no}] \ + [catch {::tcl::OptCheckType "-blah" string}] \ + [catch {::tcl::OptCheckType 6 boolean}] \ + [catch {::tcl::OptCheckType x float}] \ + [catch {::tcl::OptCheckType "a \{ c" list}] \ + [catch {::tcl::OptCheckType 2.3 int}] \ + [catch {::tcl::OptCheckType foo choice {x y Foo z}}] +} {23 23.0 1 -blah {a b c} maYbe 1 1 1 1 1 1} + + +test opt-8.1 {List utilities} { + ::tcl::Lempty {} +} 1 +test opt-8.2 {List utilities} { + ::tcl::Lempty {a b c} +} 0 +test opt-8.3 {List utilities} { + ::tcl::Lget {a {b c d} e} {1 2} +} d + +test opt-8.4 {List utilities} { + set l {a {b c d e} f} + ::tcl::Lvarset l {1 2} D + set l +} {a {b c D e} f} + +test opt-8.5 {List utilities} { + set l {a b c} + ::tcl::Lvarset1 l 6 X + set l +} {a b c {} {} {} X} + +test opt-8.6 {List utilities} { + set l {a {b c 7 e} f} + ::tcl::Lvarincr l {1 2} + set l +} {a {b c 8 e} f} + +test opt-8.7 {List utilities} { + set l {a {b c 7 e} f} + ::tcl::Lvarincr l {1 2} -9 + set l +} {a {b c -2 e} f} + +test opt-8.8 {List utilities} { + set l {{b c 7 e} f} + ::tcl::Lfirst $l +} {b c 7 e} + + +test opt-8.9 {List utilities} { + set l {a {b c 7 e} f} + ::tcl::Lrest $l +} {{b c 7 e} f} + +test opt-8.10 {List utilities} { + set l {a {b c 7 e} f} + ::tcl::Lvarpop l + set l +} {{b c 7 e} f} + +test opt-8.11 {List utilities} { + catch {unset x} + set l {a {b c 7 e} f} + list [::tcl::Lassign $l u v w x] \ + $u $v $w [info exists x] +} {3 a {b c 7 e} f 0} + +test opt-9.1 {Misc utilities} { + catch {unset v} + ::tcl::SetMax v 3 + ::tcl::SetMax v 7 + ::tcl::SetMax v 6 + set v +} 7 + +test opt-9.2 {Misc utilities} { + catch {unset v} + ::tcl::SetMin v 3 + ::tcl::SetMin v -7 + ::tcl::SetMin v 1 + set v +} -7 + +#### behaviour tests ##### + +test opt-10.1 {ambigous flags} { + ::tcl::OptProc optTest {{-fla} {-other} {-flag2xyz} {-flag3xyz}} {} + catch {optTest -fL} msg + set msg +} {ambigous option "-fL", choose from: + -fla boolflag (false) + -flag2xyz boolflag (false) + -flag3xyz boolflag (false) } + +test opt-10.2 {non ambigous flags} { + ::tcl::OptProc optTest {{-flag1xyz} {-other} {-flag2xyz} {-flag3xyz}} { + return $flag2xyz + } + optTest -fLaG2 +} 1 + +test opt-10.3 {non ambigous flags because of exact match} { + ::tcl::OptProc optTest {{-flag1x} {-other} {-flag1} {-flag1xy}} { + return $flag1 + } + optTest -flAg1 +} 1 + +test opt-10.4 {ambigous flags, not exact match} { + ::tcl::OptProc optTest {{-flag1xy} {-other} {-flag1} {-flag1xyz}} { + return $flag1 + } + catch {optTest -fLag1X} msg + set msg +} {ambigous option "-fLag1X", choose from: + -flag1xy boolflag (false) + -flag1xyz boolflag (false) } + + + +# medium size overall test example: (defined once) +::tcl::OptProc optTest { + {cmd -choice {print save delete} "sub command to choose"} + {-allowBoing -boolean true} + {arg2 -string "this is help"} + {?arg3? 7 "optional number"} + {-moreflags} +} { + list $cmd $allowBoing $arg2 $arg3 $moreflags +} + +test opt-10.5 {medium size overall test} { + list [catch {optTest} msg] $msg +} {1 {no value given for parameter "cmd" (use -help for full usage) : + cmd choice (print save delete) sub command to choose}} + + +test opt-10.6 {medium size overall test} { + list [catch {optTest -help} msg] $msg +} {1 {Usage information: + Var/FlagName Type Value Help + ------------ ---- ----- ---- + ( -help gives this help ) + cmd choice (print save delete) sub command to choose + -allowBoing boolean (true) + arg2 string () this is help + ?arg3? int (7) optional number + -moreflags boolflag (false) }} + +test opt-10.7 {medium size overall test} { + optTest save tst +} {save 1 tst 7 0} + +test opt-10.8 {medium size overall test} { + optTest save -allowBoing false -- 8 +} {save 0 8 7 0} + +test opt-10.9 {medium size overall test} { + optTest save tst -m -- +} {save 1 tst 7 1} + +test opt-10.10 {medium size overall test} { + list [catch {optTest save tst foo} msg] [lindex [split $msg "\n"] 0] +} {1 {too many arguments (unexpected argument(s): foo), usage:}} + diff --git a/tests/osa.test b/tests/osa.test new file mode 100644 index 0000000..0e94838 --- /dev/null +++ b/tests/osa.test @@ -0,0 +1,36 @@ +# Commands covered: AppleScript +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) osa.test 1.4 97/06/23 18:24:24 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# This command only runs on the Macintosh, only run the test if we +# can load the command +if {$tcl_platform(platform) != "macintosh"} { + puts "skipping: Mac only tests..." + return +} +if {[info commands AppleScript] == ""} { + puts "couldn't find AppleScript command..." + return +} + +test osa-1.1 {Tcl_OSAComponentCmd} { + list [catch AppleScript msg] $msg +} {1 {wrong # args: should be "AppleScript option ?arg ...?"}} +test osa-1.2 {Tcl_OSAComponentCmd} { + list [catch {AppleScript x} msg] $msg +} {1 {bad option "x": should be compile, decompile, delete, execute, info, load, run or store}} + +test osa-1.3 {TclOSACompileCmd} { + list [catch {AppleScript compile} msg] $msg +} {1 {wrong # args: should be "AppleScript compile ?options? code"}} diff --git a/tests/parse.test b/tests/parse.test new file mode 100644 index 0000000..514ed2a --- /dev/null +++ b/tests/parse.test @@ -0,0 +1,556 @@ +# Commands covered: set (plus basic command syntax). Also tests +# the procedures in the file tclParse.c. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) parse.test 1.42 97/08/04 11:05:53 + +if {[string compare test [info procs test]] == 1} then {source defs} + +proc fourArgs {a b c d} { + global arg1 arg2 arg3 arg4 + set arg1 $a + set arg2 $b + set arg3 $c + set arg4 $d +} + +proc getArgs args { + global argv + set argv $args +} + +# Basic argument parsing. + +test parse-1.1 {basic argument parsing} { + set arg1 {} + fourArgs a b c d + list $arg1 $arg2 $arg3 $arg4 +} {a b c d} +test parse-1.2 {basic argument parsing} { + set arg1 {} + eval "fourArgs 123\v4\f56\r7890" + list $arg1 $arg2 $arg3 $arg4 +} {123 4 56 7890} + +# Quotes. + +test parse-2.1 {quotes and variable-substitution} { + getArgs "a b c" d + set argv +} {{a b c} d} +test parse-2.2 {quotes and variable-substitution} { + set a 101 + getArgs "a$a b c" + set argv +} {{a101 b c}} +test parse-2.3 {quotes and variable-substitution} { + set argv "xy[format xabc]" + set argv +} {xyxabc} +test parse-2.4 {quotes and variable-substitution} { + set argv "xy\t" + set argv +} xy\t +test parse-2.5 {quotes and variable-substitution} { + set argv "a b c +d e f" + set argv +} a\ b\tc\nd\ e\ f +test parse-2.6 {quotes and variable-substitution} { + set argv a"bcd"e + set argv +} {a"bcd"e} + +# Braces. + +test parse-3.1 {braces} { + getArgs {a b c} d + set argv +} "{a b c} d" +test parse-3.2 {braces} { + set a 101 + set argv {a$a b c} + set b [string index $argv 1] + set b +} {$} +test parse-3.3 {braces} { + set argv {a[format xyz] b} + string length $argv +} 15 +test parse-3.4 {braces} { + set argv {a\nb\}} + string length $argv +} 6 +test parse-3.5 {braces} { + set argv {{{{}}}} + set argv +} "{{{}}}" +test parse-3.6 {braces} { + set argv a{{}}b + set argv +} "a{{}}b" +test parse-3.7 {braces} { + set a [format "last]"] + set a +} {last]} + +# Command substitution. + +test parse-4.1 {command substitution} { + set a [format xyz] + set a +} xyz +test parse-4.2 {command substitution} { + set a a[format xyz]b[format q] + set a +} axyzbq +test parse-4.3 {command substitution} { + set a a[ +set b 22; +format %s $b + +]b + set a +} a22b +test parse-4.4 {command substitution} { + set a 7.7 + if [catch {expr int($a)}] {set a foo} + set a +} 7.7 + +# Variable substitution. + +test parse-5.1 {variable substitution} { + set a 123 + set b $a + set b +} 123 +test parse-5.2 {variable substitution} { + set a 345 + set b x$a.b + set b +} x345.b +test parse-5.3 {variable substitution} { + set _123z xx + set b $_123z^ + set b +} xx^ +test parse-5.4 {variable substitution} { + set a 78 + set b a${a}b + set b +} a78b +test parse-5.5 {variable substitution} {catch {$_non_existent_} msg} 1 +test parse-5.6 {variable substitution} { + catch {$_non_existent_} msg + set msg +} {can't read "_non_existent_": no such variable} +test parse-5.7 {array variable substitution} { + catch {unset a} + set a(xyz) 123 + set b $a(xyz)foo + set b +} 123foo +test parse-5.8 {array variable substitution} { + catch {unset a} + set "a(x y z)" 123 + set b $a(x y z)foo + set b +} 123foo +test parse-5.9 {array variable substitution} { + catch {unset a}; catch {unset qqq} + set "a(x y z)" qqq + set $a([format x]\ y [format z]) foo + set qqq +} foo +test parse-5.10 {array variable substitution} { + catch {unset a} + list [catch {set b $a(22)} msg] $msg +} {1 {can't read "a(22)": no such variable}} +test parse-5.11 {array variable substitution} { + set b a$! + set b +} {a$!} +test parse-5.12 {array variable substitution} { + set b a$() + set b +} {a$()} +catch {unset a} +test parse-5.13 {array variable substitution} { + catch {unset a} + set long {This is a very long variable, long enough to cause storage \ + allocation to occur in Tcl_ParseVar. If that storage isn't getting \ + freed up correctly, then a core leak will occur when this test is \ + run. This text is probably beginning to sound like drivel, but I've \ + run out of things to say and I need more characters still.} + set a($long) 777 + set b $a($long) + list $b [array names a] +} {777 {{This is a very long variable, long enough to cause storage \ + allocation to occur in Tcl_ParseVar. If that storage isn't getting \ + freed up correctly, then a core leak will occur when this test is \ + run. This text is probably beginning to sound like drivel, but I've \ + run out of things to say and I need more characters still.}}} +test parse-5.14 {array variable substitution} { + catch {unset a}; catch {unset b}; catch {unset a1} + set a1(22) foo + set a(foo) bar + set b $a($a1(22)) + set b +} bar +catch {unset a}; catch {unset a1} + +# Backslash substitution. + +set errNum 1 +proc bsCheck {char num} { + global errNum +; test parse-6.$errNum {backslash substitution} { + scan $char %c value + set value + } $num + set errNum [expr $errNum+1] +} + +bsCheck \b 8 +bsCheck \e 101 +bsCheck \f 12 +bsCheck \n 10 +bsCheck \r 13 +bsCheck \t 9 +bsCheck \v 11 +bsCheck \{ 123 +bsCheck \} 125 +bsCheck \[ 91 +bsCheck \] 93 +bsCheck \$ 36 +bsCheck \ 32 +bsCheck \; 59 +bsCheck \\ 92 +bsCheck \Ca 67 +bsCheck \Ma 77 +bsCheck \CMa 67 +bsCheck \8a 8 +bsCheck \14 12 +bsCheck \141 97 +bsCheck \340 224 +bsCheck b\0 98 +bsCheck \x 120 +bsCheck \xa 10 +bsCheck \x41 65 +bsCheck \x541 65 + +test parse-6.1 {backslash substitution} { + set a "\a\c\n\]\}" + string length $a +} 5 +test parse-6.2 {backslash substitution} { + set a {\a\c\n\]\}} + string length $a +} 10 +test parse-6.3 {backslash substitution} { + set a "abc\ +def" + set a +} {abc def} +test parse-6.4 {backslash substitution} { + set a {abc\ +def} + set a +} {abc def} +test parse-6.5 {backslash substitution} { + set msg {} + set a xxx + set error [catch {if {24 < \ + 35} {set a 22} {set \ + a 33}} msg] + list $error $msg $a +} {0 22 22} +test parse-6.6 {backslash substitution} { + eval "concat abc\\" +} "abc\\" +test parse-6.7 {backslash substitution} { + eval "concat \\\na" +} "a" +test parse-6.8 {backslash substitution} { + eval "concat x\\\n a" +} "x a" +test parse-6.9 {backslash substitution} { + eval "concat \\x" +} "x" +test parse-6.10 {backslash substitution} { + eval "list a b\\\nc d" +} {a b c d} +test parse-6.11 {backslash substitution} { + eval "list a \"b c\"\\\nd e" +} {a {b c} d e} + +# Semi-colon. + +test parse-7.1 {semi-colons} { + set b 0 + getArgs a;set b 2 + set argv +} a +test parse-7.2 {semi-colons} { + set b 0 + getArgs a;set b 2 + set b +} 2 +test parse-7.3 {semi-colons} { + getArgs a b ; set b 1 + set argv +} {a b} +test parse-7.4 {semi-colons} { + getArgs a b ; set b 1 + set b +} 1 + +# The following checks are to ensure that the interpreter's result +# gets re-initialized by Tcl_Eval in all the right places. + +test parse-8.1 {result initialization} {concat abc} abc +test parse-8.2 {result initialization} {concat abc; proc foo {} {}} {} +test parse-8.3 {result initialization} {concat abc; proc foo {} $a} {} +test parse-8.4 {result initialization} {proc foo {} [concat abc]} {} +test parse-8.5 {result initialization} {concat abc; } abc +test parse-8.6 {result initialization} { + eval { + concat abc +}} abc +test parse-8.7 {result initialization} {} {} +test parse-8.8 {result initialization} {concat abc; ; ;} abc + +# Syntax errors. + +test parse-9.1 {syntax errors} {catch "set a \{bcd" msg} 1 +test parse-9.2 {syntax errors} { + catch "set a \{bcd" msg + set msg +} {missing close-brace} +test parse-9.3 {syntax errors} {catch {set a "bcd} msg} 1 +test parse-9.4 {syntax errors} { + catch {set a "bcd} msg + set msg +} {quoted string doesn't terminate properly} +test parse-9.5 {syntax errors} {catch {set a "bcd"xy} msg} 1 +test parse-9.6 {syntax errors} { + catch {set a "bcd"xy} msg + set msg +} {quoted string doesn't terminate properly} +test parse-9.7 {syntax errors} {catch "set a {bcd}xy" msg} 1 +test parse-9.8 {syntax errors} { + catch "set a {bcd}xy" msg + set msg +} {argument word in braces doesn't terminate properly} +test parse-9.9 {syntax errors} {catch {set a [format abc} msg} 1 +test parse-9.10 {syntax errors} { + catch {set a [format abc} msg + set msg +} {missing close-bracket or close-brace} +test parse-9.11 {syntax errors} {catch gorp-a-lot msg} 1 +test parse-9.12 {syntax errors} { + catch gorp-a-lot msg + set msg +} {invalid command name "gorp-a-lot"} +test parse-9.13 {syntax errors} { + set a [concat {a}\ + {b}] + set a +} {a b} +test parse-9.14 {syntax errors} { + list [catch {eval \$x[format "%01000d" 0](} msg] $msg $errorInfo +} {1 {missing )} {missing ) + (parsing index for array "x000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000") + while compiling +"$x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ..." + ("eval" body line 1) + invoked from within +"eval \$x[format "%01000d" 0]("}} +test parse-9.15 {syntax errors, missplaced braces} { + catch { + proc misplaced_end_brace {} { + set what foo + set when [expr ${what}size - [set off$what]}] + } msg + set msg +} {wrong # args: should be "proc name args body"} +test parse-9.16 {syntax errors, missplaced braces} { + catch { + set a { + set what foo + set when [expr ${what}size - [set off$what]}] + } msg + set msg +} {argument word in braces doesn't terminate properly} + +# Long values (stressing storage management) + +set a {1111 2222 3333 4444 5555 6666 7777 8888 9999 aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz AAAA BBBB CCCC DDDD EEEE FFFF GGGG HHHH} + +test parse-10.1 {long values} { + string length $a +} 214 +test parse-10.2 {long values} { + llength $a +} 43 +test parse-10.3 {long values} { + set b "1111 2222 3333 4444 5555 6666 7777 8888 9999 aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz AAAA BBBB CCCC DDDD EEEE FFFF GGGG HHHH" + set b +} $a +test parse-10.4 {long values} { + set b "$a" + set b +} $a +test parse-10.5 {long values} { + set b [set a] + set b +} $a +test parse-10.6 {long values} { + set b [concat 1111 2222 3333 4444 5555 6666 7777 8888 9999 aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz AAAA BBBB CCCC DDDD EEEE FFFF GGGG HHHH] + string length $b +} 214 +test parse-10.7 {long values} { + set b [concat 1111 2222 3333 4444 5555 6666 7777 8888 9999 aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz AAAA BBBB CCCC DDDD EEEE FFFF GGGG HHHH] + llength $b +} 43 +test parse-10.8 {long values} { + set b +} $a +test parse-10.9 {long values} { + set a [concat 0000 1111 2222 3333 4444 5555 6666 7777 8888 9999 aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz AAAA BBBB CCCC DDDD EEEE FFFF GGGG HHHH IIII JJJJ KKKK LLLL MMMM NNNN OOOO PPPP QQQQ RRRR SSSS TTTT UUUU VVVV WWWW XXXX YYYY ZZZZ] + llength $a +} 62 +set i 0 +foreach j [concat 0000 1111 2222 3333 4444 5555 6666 7777 8888 9999 aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz AAAA BBBB CCCC DDDD EEEE FFFF GGGG HHHH IIII JJJJ KKKK LLLL MMMM NNNN OOOO PPPP QQQQ RRRR SSSS TTTT UUUU VVVV WWWW XXXX YYYY ZZZZ] { + set test [string index 0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ $i] + set test $test$test$test$test + set i [expr $i+1] + test parse-10.10 {long values} { + set j + } $test +} +test parse-10.11 {test buffer overflow in backslashes in braces} { + expr {"a" == {xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101\101}} +} 0 + +test parse-11.1 {comments} { + set a old + eval { # set a new} + set a +} {old} +test parse-11.2 {comments} { + set a old + eval " # set a new\nset a new" + set a +} {new} +test parse-11.3 {comments} { + set a old + eval " # set a new\\\nset a new" + set a +} {old} +test parse-11.4 {comments} { + set a old + eval " # set a new\\\\\nset a new" + set a +} {new} + +test parse-12.1 {comments at the end of a bracketed script} { + set x "[ +expr 1+1 +# skip this! +]" +} {2} + +if {[info command testwordend] == "testwordend"} { + test parse-13.1 {TclWordEnd procedure} { + testwordend " \n abc" + } {c} + test parse-13.2 {TclWordEnd procedure} { + testwordend " \\\n" + } {} + test parse-13.3 {TclWordEnd procedure} { + testwordend " \\\n " + } { } + test parse-13.4 {TclWordEnd procedure} { + testwordend {"abc"} + } {"} + test parse-13.5 {TclWordEnd procedure} { + testwordend {{xyz}} + } \} + test parse-13.6 {TclWordEnd procedure} { + testwordend {{a{}b{}\}} xyz} + } "\} xyz" + test parse-13.7 {TclWordEnd procedure} { + testwordend {abc[this is a]def ghi} + } {f ghi} + test parse-13.8 {TclWordEnd procedure} { + testwordend "puts\\\n\n " + } "s\\\n\n " + test parse-13.9 {TclWordEnd procedure} { + testwordend "puts\\\n " + } "s\\\n " + test parse-13.10 {TclWordEnd procedure} { + testwordend "puts\\\n xyz" + } "s\\\n xyz" + test parse-13.11 {TclWordEnd procedure} { + testwordend {a$x.$y(a long index) foo} + } ") foo" + test parse-13.12 {TclWordEnd procedure} { + testwordend {abc; def} + } {; def} + test parse-13.13 {TclWordEnd procedure} { + testwordend {abc def} + } {c def} + test parse-13.14 {TclWordEnd procedure} { + testwordend {abc def} + } {c def} + test parse-13.15 {TclWordEnd procedure} { + testwordend "abc\ndef" + } "c\ndef" + test parse-13.16 {TclWordEnd procedure} { + testwordend "abc" + } {c} + test parse-13.17 {TclWordEnd procedure} { + testwordend "a\000bc" + } {c} + test parse-13.18 {TclWordEnd procedure} { + testwordend \[a\000\] + } {]} + test parse-13.19 {TclWordEnd procedure} { + testwordend \"a\000\" + } {"} + test parse-13.20 {TclWordEnd procedure} { + testwordend a{\000}b + } {b} + test parse-13.21 {TclWordEnd procedure} { + testwordend " \000b" + } {b} +} + +test parse-14.1 {TclScriptEnd procedure} { + info complete {puts [ + expr 1+1 + #this is a comment ]} +} {0} +test parse-14.2 {TclScriptEnd procedure} { + info complete "abc\\\n" +} {0} +test parse-14.3 {TclScriptEnd procedure} { + info complete "abc\\\\\n" +} {1} +test parse-14.4 {TclScriptEnd procedure} { + info complete "xyz \[abc \{abc\]" +} {0} +test parse-14.5 {TclScriptEnd procedure} { + info complete "xyz \[abc" +} {0} diff --git a/tests/pid.test b/tests/pid.test new file mode 100644 index 0000000..1f6e039 --- /dev/null +++ b/tests/pid.test @@ -0,0 +1,52 @@ +# Commands covered: pid +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1995 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) pid.test 1.12 96/04/12 11:14:43 + +# If pid is not defined just return with no error +# Some platforms may not have the pid command implemented +if {[info commands pid] == ""} { + puts "pid is not implemented for this machine" + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {removeFile test1} + +test pid-1.1 {pid command} { + regexp {(^[0-9]+$)|(^0x[0-9a-fA-F]+$)} [pid] +} 1 +test pid-1.2 {pid command} {unixOrPc unixExecs} { + set f [open {| echo foo | cat >test1} w] + set pids [pid $f] + close $f + catch {removeFile test1} + list [llength $pids] [regexp {^[0-9]+$} [lindex $pids 0]] \ + [regexp {^[0-9]+$} [lindex $pids 1]] \ + [expr {[lindex $pids 0] == [lindex $pids 1]}] +} {2 1 1 0} +test pid-1.3 {pid command} { + set f [open test1 w] + set pids [pid $f] + close $f + set pids +} {} +test pid-1.4 {pid command} { + list [catch {pid a b} msg] $msg +} {1 {wrong # args: should be "pid ?channelId?"}} +test pid-1.5 {pid command} { + list [catch {pid gorp} msg] $msg +} {1 {can not find channel named "gorp"}} + +catch {removeFile test1} +concat {} diff --git a/tests/pkg.test b/tests/pkg.test new file mode 100644 index 0000000..e6a99c6 --- /dev/null +++ b/tests/pkg.test @@ -0,0 +1,563 @@ +# Commands covered: pkg +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) pkg.test 1.12 97/08/14 01:33:54 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Do all this in a slave interp to avoid garbaging the +# package list +set i [interp create] +interp eval $i [list set VERBOSE $VERBOSE] +interp eval $i [list set TESTS $TESTS] +interp eval $i { + +if {[string compare test [info procs test]] == 1} then {source defs} + +eval package forget [package names] +set oldPkgUnknown [package unknown] +package unknown {} +set oldPath $auto_path +set auto_path "" + +test pkg-1.1 {Tcl_PkgProvide procedure} { + package forget t + package provide t 2.3 +} {} +test pkg-1.2 {Tcl_PkgProvide procedure} { + package forget t + package provide t 2.3 + list [catch {package provide t 2.2} msg] $msg +} {1 {conflicting versions provided for package "t": 2.3, then 2.2}} +test pkg-1.3 {Tcl_PkgProvide procedure} { + package forget t + package provide t 2.3 + list [catch {package provide t 2.4} msg] $msg +} {1 {conflicting versions provided for package "t": 2.3, then 2.4}} +test pkg-1.4 {Tcl_PkgProvide procedure} { + package forget t + package provide t 2.3 + list [catch {package provide t 3.3} msg] $msg +} {1 {conflicting versions provided for package "t": 2.3, then 3.3}} +test pkg-1.5 {Tcl_PkgProvide procedure} { + package forget t + package provide t 2.3 + package provide t 2.3 +} {} + +test pkg-2.1 {Tcl_PkgRequire procedure, picking best version} { + package forget t + foreach i {1.4 3.4 2.3 2.4 2.2} { + package ifneeded t $i "set x $i; package provide t $i" + } + set x xxx + package require t + set x +} {3.4} +test pkg-2.2 {Tcl_PkgRequire procedure, picking best version} { + package forget t + foreach i {1.4 3.4 2.3 2.4 2.2 3.5 3.2} { + package ifneeded t $i "set x $i; package provide t $i" + } + set x xxx + package require t + set x +} {3.5} +test pkg-2.3 {Tcl_PkgRequire procedure, picking best version} { + package forget t + foreach i {3.5 2.1 2.3} { + package ifneeded t $i "set x $i; package provide t $i" + } + set x xxx + package require t 2.2 + set x +} {2.3} +test pkg-2.4 {Tcl_PkgRequire procedure, picking best version} { + package forget t + foreach i {1.4 3.4 2.3 2.4 2.2} { + package ifneeded t $i "set x $i; package provide t $i" + } + set x xxx + package require -exact t 2.3 + set x +} {2.3} +test pkg-2.5 {Tcl_PkgRequire procedure, picking best version} { + package forget t + foreach i {1.4 3.4 2.3 2.4 2.2} { + package ifneeded t $i "set x $i; package provide t $i" + } + set x xxx + package require t 2.1 + set x +} {2.4} +test pkg-2.6 {Tcl_PkgRequire procedure, can't find suitable version} { + package forget t + package unknown {} + foreach i {1.4 3.4 2.3 2.4 2.2} { + package ifneeded t $i "set x $i" + } + list [catch {package require t 2.5} msg] $msg +} {1 {can't find package t 2.5}} +test pkg-2.7 {Tcl_PkgRequire procedure, can't find suitable version} { + package forget t + package unknown {} + foreach i {1.4 3.4 2.3 2.4 2.2} { + package ifneeded t $i "set x $i" + } + list [catch {package require t 4.1} msg] $msg +} {1 {can't find package t 4.1}} +test pkg-2.8 {Tcl_PkgRequire procedure, can't find suitable version} { + package forget t + package unknown {} + foreach i {1.4 3.4 2.3 2.4 2.2} { + package ifneeded t $i "set x $i" + } + list [catch {package require -exact t 1.3} msg] $msg +} {1 {can't find package t 1.3}} +test pkg-2.9 {Tcl_PkgRequire procedure, can't find suitable version} { + package forget t + package unknown {} + list [catch {package require t} msg] $msg +} {1 {can't find package t}} +test pkg-2.10 {Tcl_PkgRequire procedure, error in ifneeded script} { + package forget t + package ifneeded t 2.1 {package provide t 2.1; error "ifneeded test"} + list [catch {package require t 2.1} msg] $msg $errorInfo +} {1 {ifneeded test} {ifneeded test + while executing +"error "ifneeded test"" + ("package ifneeded" script) + invoked from within +"package require t 2.1"}} +test pkg-2.11 {Tcl_PkgRequire procedure, ifneeded script doesn't provide package} { + package forget t + package ifneeded t 2.1 "set x invoked" + set x xxx + list [catch {package require t 2.1} msg] $msg $x +} {1 {can't find package t 2.1} invoked} +test pkg-2.12 {Tcl_PkgRequire procedure, self-deleting script} { + package forget t + package ifneeded t 1.2 "package forget t; set x 1.2; package provide t 1.2" + set x xxx + package require t 1.2 + set x +} {1.2} +test pkg-2.13 {Tcl_PkgRequire procedure, "package unknown" support} { + proc pkgUnknown args { + global x + set x $args + package provide [lindex $args 0] [lindex $args 1] + } + package forget t + foreach i {1.4 3.4 2.3 2.4 2.2} { + package ifneeded t $i "set x $i" + } + package unknown pkgUnknown + set x xxx + package require -exact t 1.5 + package unknown {} + set x +} {t 1.5 -exact} +test pkg-2.14 {Tcl_PkgRequire procedure, "package unknown" support} { + proc pkgUnknown args { + package ifneeded t 1.2 "set x loaded; package provide t 1.2" + } + package forget t + package unknown pkgUnknown + set x xxx + set result [list [package require t] $x] + package unknown {} + set result +} {1.2 loaded} +test pkg-2.15 {Tcl_PkgRequire procedure, "package unknown" support} { + proc pkgUnknown args { + global x + set x $args + package provide [lindex $args 0] 2.0 + } + package forget {a b} + package unknown pkgUnknown + set x xxx + package require {a b} + package unknown {} + set x +} {{a b} {}} +test pkg-2.16 {Tcl_PkgRequire procedure, "package unknown" error} { + proc pkgUnknown args { + error "testing package unknown" + } + package forget t + package unknown pkgUnknown + set result [list [catch {package require t} msg] $msg $errorInfo] + package unknown {} + set result +} {1 {testing package unknown} {testing package unknown + while executing +"error "testing package unknown"" + (procedure "pkgUnknown" line 2) + invoked from within +"pkgUnknown t {}" + ("package unknown" script) + invoked from within +"package require t"}} +test pkg-2.17 {Tcl_PkgRequire procedure, "package unknown" doesn't load package} { + proc pkgUnknown args { + global x + set x $args + } + package forget t + foreach i {1.4 3.4 2.3 2.4 2.2} { + package ifneeded t $i "set x $i" + } + package unknown pkgUnknown + set x xxx + set result [list [catch {package require -exact t 1.5} msg] $msg $x] + package unknown {} + set result +} {1 {can't find package t 1.5} {t 1.5 -exact}} +test pkg-2.18 {Tcl_PkgRequire procedure, version checks} { + package forget t + package provide t 2.3 + package require t +} {2.3} +test pkg-2.19 {Tcl_PkgRequire procedure, version checks} { + package forget t + package provide t 2.3 + package require t 2.1 +} {2.3} +test pkg-2.20 {Tcl_PkgRequire procedure, version checks} { + package forget t + package provide t 2.3 + package require t 2.3 +} {2.3} +test pkg-2.21 {Tcl_PkgRequire procedure, version checks} { + package forget t + package provide t 2.3 + list [catch {package require t 2.4} msg] $msg +} {1 {version conflict for package "t": have 2.3, need 2.4}} +test pkg-2.22 {Tcl_PkgRequire procedure, version checks} { + package forget t + package provide t 2.3 + list [catch {package require t 1.2} msg] $msg +} {1 {version conflict for package "t": have 2.3, need 1.2}} +test pkg-2.23 {Tcl_PkgRequire procedure, version checks} { + package forget t + package provide t 2.3 + package require -exact t 2.3 +} {2.3} +test pkg-2.24 {Tcl_PkgRequire procedure, version checks} { + package forget t + package provide t 2.3 + list [catch {package require -exact t 2.2} msg] $msg +} {1 {version conflict for package "t": have 2.3, need 2.2}} + +test pkg-3.1 {Tcl_PackageCmd procedure} { + list [catch {package} msg] $msg +} {1 {wrong # args: should be "package option ?arg arg ...?"}} +test pkg-3.2 {Tcl_PackageCmd procedure, "forget" option} { + foreach i [package names] { + package forget $i + } + package names +} {} +test pkg-3.3 {Tcl_PackageCmd procedure, "forget" option} { + foreach i [package names] { + package forget $i + } + package forget foo +} {} +test pkg-3.4 {Tcl_PackageCmd procedure, "forget" option} { + foreach i [package names] { + package forget $i + } + package ifneeded t 1.1 {first script} + package ifneeded t 2.3 {second script} + package ifneeded x 1.4 {x's script} + set result {} + lappend result [lsort [package names]] [package versions t] + package forget t + lappend result [lsort [package names]] [package versions t] +} {{t x} {1.1 2.3} x {}} +test pkg-3.5 {Tcl_PackageCmd procedure, "forget" option} { + foreach i [package names] { + package forget $i + } + package ifneeded a 1.1 {first script} + package ifneeded b 2.3 {second script} + package ifneeded c 1.4 {third script} + package forget + set result [list [lsort [package names]]] + package forget a c + lappend result [lsort [package names]] +} {{a b c} b} +test pkg-3.6 {Tcl_PackageCmd procedure, "ifneeded" option} { + list [catch {package ifneeded a} msg] $msg +} {1 {wrong # args: should be "package ifneeded package version ?script?"}} +test pkg-3.7 {Tcl_PackageCmd procedure, "ifneeded" option} { + list [catch {package ifneeded a b c d} msg] $msg +} {1 {wrong # args: should be "package ifneeded package version ?script?"}} +test pkg-3.8 {Tcl_PackageCmd procedure, "ifneeded" option} { + list [catch {package ifneeded t xyz} msg] $msg +} {1 {expected version number but got "xyz"}} +test pkg-3.9 {Tcl_PackageCmd procedure, "ifneeded" option} { + foreach i [package names] { + package forget $i + } + list [package ifneeded foo 1.1] [package names] +} {{} {}} +test pkg-3.10 {Tcl_PackageCmd procedure, "ifneeded" option} { + package forget t + package ifneeded t 1.4 "script for t 1.4" + list [package names] [package ifneeded t 1.4] [package versions t] +} {t {script for t 1.4} 1.4} +test pkg-3.11 {Tcl_PackageCmd procedure, "ifneeded" option} { + package forget t + package ifneeded t 1.4 "script for t 1.4" + list [package ifneeded t 1.5] [package names] [package versions t] +} {{} t 1.4} +test pkg-3.12 {Tcl_PackageCmd procedure, "ifneeded" option} { + package forget t + package ifneeded t 1.4 "script for t 1.4" + package ifneeded t 1.4 "second script for t 1.4" + list [package ifneeded t 1.4] [package names] [package versions t] +} {{second script for t 1.4} t 1.4} +test pkg-3.13 {Tcl_PackageCmd procedure, "ifneeded" option} { + package forget t + package ifneeded t 1.4 "script for t 1.4" + package ifneeded t 1.2 "second script" + package ifneeded t 3.1 "last script" + list [package ifneeded t 1.2] [package versions t] +} {{second script} {1.4 1.2 3.1}} +test pkg-3.14 {Tcl_PackageCmd procedure, "names" option} { + list [catch {package names a} msg] $msg +} {1 {wrong # args: should be "package names"}} +test pkg-3.15 {Tcl_PackageCmd procedure, "names" option} { + foreach i [package names] { + package forget $i + } + package names +} {} +test pkg-3.16 {Tcl_PackageCmd procedure, "names" option} { + foreach i [package names] { + package forget $i + } + package ifneeded x 1.2 {dummy} + package provide x 1.3 + package provide y 2.4 + catch {package require z 47.16} + lsort [package names] +} {x y} +test pkg-3.17 {Tcl_PackageCmd procedure, "provide" option} { + list [catch {package provide} msg] $msg +} {1 {wrong # args: should be "package provide package ?version?"}} +test pkg-3.18 {Tcl_PackageCmd procedure, "provide" option} { + list [catch {package provide a b c} msg] $msg +} {1 {wrong # args: should be "package provide package ?version?"}} +test pkg-3.19 {Tcl_PackageCmd procedure, "provide" option} { + package forget t + package provide t +} {} +test pkg-3.20 {Tcl_PackageCmd procedure, "provide" option} { + package forget t + package provide t 2.3 + package provide t +} {2.3} +test pkg-3.21 {Tcl_PackageCmd procedure, "provide" option} { + package forget t + list [catch {package provide t a.b} msg] $msg +} {1 {expected version number but got "a.b"}} +test pkg-3.22 {Tcl_PackageCmd procedure, "require" option} { + list [catch {package require} msg] $msg +} {1 {wrong # args: should be "package require ?-exact? package ?version?"}} +test pkg-3.23 {Tcl_PackageCmd procedure, "require" option} { + list [catch {package require a b c} msg] $msg +} {1 {wrong # args: should be "package require ?-exact? package ?version?"}} +test pkg-3.24 {Tcl_PackageCmd procedure, "require" option} { + list [catch {package require -exact a b c} msg] $msg +} {1 {wrong # args: should be "package require ?-exact? package ?version?"}} +test pkg-3.25 {Tcl_PackageCmd procedure, "require" option} { + list [catch {package require -bs a b} msg] $msg +} {1 {wrong # args: should be "package require ?-exact? package ?version?"}} +test pkg-3.26 {Tcl_PackageCmd procedure, "require" option} { + list [catch {package require x a.b} msg] $msg +} {1 {expected version number but got "a.b"}} +test pkg-3.27 {Tcl_PackageCmd procedure, "require" option} { + list [catch {package require -exact x a.b} msg] $msg +} {1 {expected version number but got "a.b"}} +test pkg-3.28 {Tcl_PackageCmd procedure, "require" option} { + list [catch {package require -exact x} msg] $msg +} {1 {wrong # args: should be "package require ?-exact? package ?version?"}} +test pkg-3.29 {Tcl_PackageCmd procedure, "require" option} { + list [catch {package require -exact} msg] $msg +} {1 {wrong # args: should be "package require ?-exact? package ?version?"}} +test pkg-3.30 {Tcl_PackageCmd procedure, "require" option} { + package forget t + package provide t 2.3 + package require t 2.1 +} {2.3} +test pkg-3.31 {Tcl_PackageCmd procedure, "require" option} { + package forget t + list [catch {package require t} msg] $msg +} {1 {can't find package t}} +test pkg-3.32 {Tcl_PackageCmd procedure, "require" option} { + package forget t + package ifneeded t 2.3 "error {synthetic error}" + list [catch {package require t 2.3} msg] $msg +} {1 {synthetic error}} +test pkg-3.33 {Tcl_PackageCmd procedure, "unknown" option} { + list [catch {package unknown a b} msg] $msg +} {1 {wrong # args: should be "package unknown ?command?"}} +test pkg-3.34 {Tcl_PackageCmd procedure, "unknown" option} { + package unknown "test script" + package unknown +} {test script} +test pkg-3.35 {Tcl_PackageCmd procedure, "unknown" option} { + package unknown "test script" + package unknown {} + package unknown +} {} +test pkg-3.36 {Tcl_PackageCmd procedure, "vcompare" option} { + list [catch {package vcompare a} msg] $msg +} {1 {wrong # args: should be "package vcompare version1 version2"}} +test pkg-3.37 {Tcl_PackageCmd procedure, "vcompare" option} { + list [catch {package vcompare a b c} msg] $msg +} {1 {wrong # args: should be "package vcompare version1 version2"}} +test pkg-3.38 {Tcl_PackageCmd procedure, "vcompare" option} { + list [catch {package vcompare x.y 3.4} msg] $msg +} {1 {expected version number but got "x.y"}} +test pkg-3.39 {Tcl_PackageCmd procedure, "vcompare" option} { + list [catch {package vcompare 2.1 a.b} msg] $msg +} {1 {expected version number but got "a.b"}} +test pkg-3.40 {Tcl_PackageCmd procedure, "vcompare" option} { + package vc 2.1 2.3 +} {-1} +test pkg-3.41 {Tcl_PackageCmd procedure, "vcompare" option} { + package vc 2.2.4 2.2.4 +} {0} +test pkg-3.42 {Tcl_PackageCmd procedure, "versions" option} { + list [catch {package versions} msg] $msg +} {1 {wrong # args: should be "package versions package"}} +test pkg-3.43 {Tcl_PackageCmd procedure, "versions" option} { + list [catch {package versions a b} msg] $msg +} {1 {wrong # args: should be "package versions package"}} +test pkg-3.44 {Tcl_PackageCmd procedure, "versions" option} { + package forget t + package versions t +} {} +test pkg-3.45 {Tcl_PackageCmd procedure, "versions" option} { + package forget t + package provide t 2.3 + package versions t +} {} +test pkg-3.46 {Tcl_PackageCmd procedure, "versions" option} { + package forget t + package ifneeded t 2.3 x + package ifneeded t 2.4 y + package versions t +} {2.3 2.4} +test pkg-3.47 {Tcl_PackageCmd procedure, "vsatisfies" option} { + list [catch {package vsatisfies a} msg] $msg +} {1 {wrong # args: should be "package vsatisfies version1 version2"}} +test pkg-3.48 {Tcl_PackageCmd procedure, "vsatisfies" option} { + list [catch {package vsatisfies a b c} msg] $msg +} {1 {wrong # args: should be "package vsatisfies version1 version2"}} +test pkg-3.49 {Tcl_PackageCmd procedure, "vsatisfies" option} { + list [catch {package vsatisfies x.y 3.4} msg] $msg +} {1 {expected version number but got "x.y"}} +test pkg-3.50 {Tcl_PackageCmd procedure, "vsatisfies" option} { + list [catch {package vcompare 2.1 a.b} msg] $msg +} {1 {expected version number but got "a.b"}} +test pkg-3.51 {Tcl_PackageCmd procedure, "vsatisfies" option} { + package vs 2.3 2.1 +} {1} +test pkg-3.52 {Tcl_PackageCmd procedure, "vsatisfies" option} { + package vs 2.3 1.2 +} {0} +test pkg-3.53 {Tcl_PackageCmd procedure, "versions" option} { + list [catch {package foo} msg] $msg +} {1 {bad option "foo": should be forget, ifneeded, names, provide, require, unknown, vcompare, versions, or vsatisfies}} + +# No tests for FindPackage; can't think up anything detectable +# errors. + +test pkg-4.1 {TclFreePackageInfo procedure} { + interp create foo + foo eval { + package ifneeded t 2.3 x + package ifneeded t 2.4 y + package ifneeded x 3.1 z + package provide q 4.3 + package unknown "will this get freed?" + } + interp delete foo +} {} +test pkg-4.2 {TclFreePackageInfo procedure} { + interp create foo + foo eval { + package ifneeded t 2.3 x + package ifneeded t 2.4 y + package ifneeded x 3.1 z + package provide q 4.3 + } + foo alias z kill + proc kill {} { + interp delete foo + } + list [catch {foo eval package require x 3.1} msg] $msg +} {1 {can't find package x 3.1}} + +test pkg-5.1 {CheckVersion procedure} { + list [catch {package vcompare 1 2.1} msg] $msg +} {0 -1} +test pkg-5.2 {CheckVersion procedure} { + list [catch {package vcompare .1 2.1} msg] $msg +} {1 {expected version number but got ".1"}} +test pkg-5.3 {CheckVersion procedure} { + list [catch {package vcompare 111.2a.3 2.1} msg] $msg +} {1 {expected version number but got "111.2a.3"}} +test pkg-5.4 {CheckVersion procedure} { + list [catch {package vcompare 1.2.3. 2.1} msg] $msg +} {1 {expected version number but got "1.2.3."}} + +test pkg-6.1 {ComparePkgVersions procedure} { + package vcompare 1.23 1.22 +} {1} +test pkg-6.2 {ComparePkgVersions procedure} { + package vcompare 1.22.1.2.3 1.22.1.2.3 +} {0} +test pkg-6.3 {ComparePkgVersions procedure} { + package vcompare 1.21 1.22 +} {-1} +test pkg-6.4 {ComparePkgVersions procedure} { + package vcompare 1.21 1.21.2 +} {-1} +test pkg-6.5 {ComparePkgVersions procedure} { + package vcompare 1.21.1 1.21 +} {1} +test pkg-6.6 {ComparePkgVersions procedure} { + package vsatisfies 1.21.1 1.21 +} {1} +test pkg-6.7 {ComparePkgVersions procedure} { + package vsatisfies 2.22.3 1.21 +} {0} +test pkg-6.8 {ComparePkgVersions procedure} { + package vsatisfies 1 1 +} {1} +test pkg-6.9 {ComparePkgVersions procedure} { + package vsatisfies 2 1 +} {0} + +set auto_path $oldPath +package unknown $oldPkgUnknown +concat + +} +interp delete $i diff --git a/tests/proc-old.test b/tests/proc-old.test new file mode 100644 index 0000000..c770edb --- /dev/null +++ b/tests/proc-old.test @@ -0,0 +1,505 @@ +# Commands covered: proc, return, global +# +# This file, proc-old.test, includes the original set of tests for Tcl's +# proc, return, and global commands. There is now a new file proc.test +# that contains tests for the tclProc.c source file. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) proc-old.test 1.31 97/07/02 16:41:36 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {rename t1 ""} +catch {rename foo ""} + +proc tproc {} {return a; return b} +test proc-old-1.1 {simple procedure call and return} {tproc} a +proc tproc x { + set x [expr $x+1] + return $x +} +test proc-old-1.2 {simple procedure call and return} {tproc 2} 3 +test proc-old-1.3 {simple procedure call and return} { + proc tproc {} {return foo} +} {} +test proc-old-1.4 {simple procedure call and return} { + proc tproc {} {return} + tproc +} {} +proc tproc1 {a} {incr a; return $a} +proc tproc2 {a b} {incr a; return $a} +test proc-old-1.5 {simple procedure call and return (2 procs with same body but different parameters)} { + list [tproc1 123] [tproc2 456 789] +} {124 457} +test proc-old-1.6 {simple procedure call and return (shared proc body string)} { + set x {} + proc tproc {} {} ;# body is shared with x + list [tproc] [append x foo] +} {{} foo} + +test proc-old-2.1 {local and global variables} { + proc tproc x { + set x [expr $x+1] + return $x + } + set x 42 + list [tproc 6] $x +} {7 42} +test proc-old-2.2 {local and global variables} { + proc tproc x { + set y [expr $x+1] + return $y + } + set y 18 + list [tproc 6] $y +} {7 18} +test proc-old-2.3 {local and global variables} { + proc tproc x { + global y + set y [expr $x+1] + return $y + } + set y 189 + list [tproc 6] $y +} {7 7} +test proc-old-2.4 {local and global variables} { + proc tproc x { + global y + return [expr $x+$y] + } + set y 189 + list [tproc 6] $y +} {195 189} +catch {unset _undefined_} +test proc-old-2.5 {local and global variables} { + proc tproc x { + global _undefined_ + return $_undefined_ + } + list [catch {tproc xxx} msg] $msg +} {1 {can't read "_undefined_": no such variable}} +test proc-old-2.6 {local and global variables} { + set a 114 + set b 115 + global a b + list $a $b +} {114 115} + +proc do {cmd} {eval $cmd} +test proc-old-3.1 {local and global arrays} { + catch {unset a} + set a(0) 22 + list [catch {do {global a; set a(0)}} msg] $msg +} {0 22} +test proc-old-3.2 {local and global arrays} { + catch {unset a} + set a(x) 22 + list [catch {do {global a; set a(x) newValue}} msg] $msg $a(x) +} {0 newValue newValue} +test proc-old-3.3 {local and global arrays} { + catch {unset a} + set a(x) 22 + set a(y) 33 + list [catch {do {global a; unset a(y)}; array names a} msg] $msg +} {0 x} +test proc-old-3.4 {local and global arrays} { + catch {unset a} + set a(x) 22 + set a(y) 33 + list [catch {do {global a; unset a; info exists a}} msg] $msg \ + [info exists a] +} {0 0 0} +test proc-old-3.5 {local and global arrays} { + catch {unset a} + set a(x) 22 + set a(y) 33 + list [catch {do {global a; unset a(y); array names a}} msg] $msg +} {0 x} +catch {unset a} +test proc-old-3.6 {local and global arrays} { + catch {unset a} + set a(x) 22 + set a(y) 33 + do {global a; do {global a; unset a}; set a(z) 22} + list [catch {array names a} msg] $msg +} {0 z} +test proc-old-3.7 {local and global arrays} { + proc t1 {args} {global info; set info 1} + catch {unset a} + set info {} + do {global a; trace var a(1) w t1} + set a(1) 44 + set info +} 1 +test proc-old-3.8 {local and global arrays} { + proc t1 {args} {global info; set info 1} + catch {unset a} + trace var a(1) w t1 + set info {} + do {global a; trace vdelete a(1) w t1} + set a(1) 44 + set info +} {} +test proc-old-3.9 {local and global arrays} { + proc t1 {args} {global info; set info 1} + catch {unset a} + trace var a(1) w t1 + do {global a; trace vinfo a(1)} +} {{w t1}} +catch {unset a} + +test proc-old-3.1 {arguments and defaults} { + proc tproc {x y z} { + return [list $x $y $z] + } + tproc 11 12 13 +} {11 12 13} +test proc-old-3.2 {arguments and defaults} { + proc tproc {x y z} { + return [list $x $y $z] + } + list [catch {tproc 11 12} msg] $msg +} {1 {no value given for parameter "z" to "tproc"}} +test proc-old-3.3 {arguments and defaults} { + proc tproc {x y z} { + return [list $x $y $z] + } + list [catch {tproc 11 12 13 14} msg] $msg +} {1 {called "tproc" with too many arguments}} +test proc-old-3.4 {arguments and defaults} { + proc tproc {x {y y-default} {z z-default}} { + return [list $x $y $z] + } + tproc 11 12 13 +} {11 12 13} +test proc-old-3.5 {arguments and defaults} { + proc tproc {x {y y-default} {z z-default}} { + return [list $x $y $z] + } + tproc 11 12 +} {11 12 z-default} +test proc-old-3.6 {arguments and defaults} { + proc tproc {x {y y-default} {z z-default}} { + return [list $x $y $z] + } + tproc 11 +} {11 y-default z-default} +test proc-old-3.7 {arguments and defaults} { + proc tproc {x {y y-default} {z z-default}} { + return [list $x $y $z] + } + list [catch {tproc} msg] $msg +} {1 {no value given for parameter "x" to "tproc"}} +test proc-old-3.8 {arguments and defaults} { + list [catch { + proc tproc {x {y y-default} z} { + return [list $x $y $z] + } + tproc 2 3 + } msg] $msg +} {1 {no value given for parameter "z" to "tproc"}} +test proc-old-3.9 {arguments and defaults} { + proc tproc {x {y y-default} args} { + return [list $x $y $args] + } + tproc 2 3 4 5 +} {2 3 {4 5}} +test proc-old-3.10 {arguments and defaults} { + proc tproc {x {y y-default} args} { + return [list $x $y $args] + } + tproc 2 3 +} {2 3 {}} +test proc-old-3.11 {arguments and defaults} { + proc tproc {x {y y-default} args} { + return [list $x $y $args] + } + tproc 2 +} {2 y-default {}} +test proc-old-3.12 {arguments and defaults} { + proc tproc {x {y y-default} args} { + return [list $x $y $args] + } + list [catch {tproc} msg] $msg +} {1 {no value given for parameter "x" to "tproc"}} + +test proc-old-4.1 {variable numbers of arguments} { + proc tproc args {return $args} + tproc +} {} +test proc-old-4.2 {variable numbers of arguments} { + proc tproc args {return $args} + tproc 1 2 3 4 5 6 7 8 +} {1 2 3 4 5 6 7 8} +test proc-old-4.3 {variable numbers of arguments} { + proc tproc args {return $args} + tproc 1 {2 3} {4 {5 6} {{{7}}}} 8 +} {1 {2 3} {4 {5 6} {{{7}}}} 8} +test proc-old-4.4 {variable numbers of arguments} { + proc tproc {x y args} {return $args} + tproc 1 2 3 4 5 6 7 +} {3 4 5 6 7} +test proc-old-4.5 {variable numbers of arguments} { + proc tproc {x y args} {return $args} + tproc 1 2 +} {} +test proc-old-4.6 {variable numbers of arguments} { + proc tproc {x missing args} {return $args} + list [catch {tproc 1} msg] $msg +} {1 {no value given for parameter "missing" to "tproc"}} + +test proc-old-5.1 {error conditions} { + list [catch {proc} msg] $msg +} {1 {wrong # args: should be "proc name args body"}} +test proc-old-5.2 {error conditions} { + list [catch {proc tproc b} msg] $msg +} {1 {wrong # args: should be "proc name args body"}} +test proc-old-5.3 {error conditions} { + list [catch {proc tproc b c d e} msg] $msg +} {1 {wrong # args: should be "proc name args body"}} +test proc-old-5.4 {error conditions} { + list [catch {proc tproc \{xyz {return foo}} msg] $msg +} {1 {unmatched open brace in list}} +test proc-old-5.5 {error conditions} { + list [catch {proc tproc {{} y} {return foo}} msg] $msg +} {1 {procedure "tproc" has argument with no name}} +test proc-old-5.6 {error conditions} { + list [catch {proc tproc {{} y} {return foo}} msg] $msg +} {1 {procedure "tproc" has argument with no name}} +test proc-old-5.7 {error conditions} { + list [catch {proc tproc {{x 1 2} y} {return foo}} msg] $msg +} {1 {too many fields in argument specifier "x 1 2"}} +test proc-old-5.8 {error conditions} { + catch {return} +} 2 +test proc-old-5.9 {error conditions} { + list [catch {global} msg] $msg +} {1 {wrong # args: should be "global varName ?varName ...?"}} +proc tproc {} { + set a 22 + global a +} +test proc-old-5.10 {error conditions} { + list [catch {tproc} msg] $msg +} {1 {variable "a" already exists}} +test proc-old-5.11 {error conditions} { + catch {rename tproc {}} + catch { + proc tproc {x {} z} {return foo} + } + list [catch {tproc 1} msg] $msg +} {1 {invalid command name "tproc"}} +test proc-old-5.12 {error conditions} { + proc tproc {} { + set a 22 + error "error in procedure" + return + } + list [catch tproc msg] $msg +} {1 {error in procedure}} +test proc-old-5.13 {error conditions} { + proc tproc {} { + set a 22 + error "error in procedure" + return + } + catch tproc msg + set errorInfo +} {error in procedure + while executing +"error "error in procedure"" + (procedure "tproc" line 3) + invoked from within +"tproc"} +test proc-old-5.14 {error conditions} { + proc tproc {} { + set a 22 + break + return + } + catch tproc msg + set errorInfo +} {invoked "break" outside of a loop + while executing +"tproc"} +test proc-old-5.15 {error conditions} { + proc tproc {} { + set a 22 + continue + return + } + catch tproc msg + set errorInfo +} {invoked "continue" outside of a loop + while executing +"tproc"} +test proc-old-5.16 {error conditions} { + proc foo args { + global fooMsg + set fooMsg "foo was called: $args" + } + proc tproc {} { + set x 44 + trace var x u foo + while {$x < 100} { + error "Nested error" + } + } + set fooMsg "foo not called" + list [catch tproc msg] $msg $errorInfo $fooMsg +} {1 {Nested error} {Nested error + while executing +"error "Nested error"" + (procedure "tproc" line 5) + invoked from within +"tproc"} {foo was called: x {} u}} + +# The tests below will really only be useful when run under Purify or +# some other system that can detect accesses to freed memory... + +test proc-old-6.1 {procedure that redefines itself} { + proc tproc {} { + proc tproc {} { + return 44 + } + return 45 + } + tproc +} 45 +test proc-old-6.2 {procedure that deletes itself} { + proc tproc {} { + rename tproc {} + return 45 + } + tproc +} 45 + +proc tproc code { + return -code $code abc +} +test proc-old-7.1 {return with special completion code} { + list [catch {tproc ok} msg] $msg +} {0 abc} +test proc-old-7.2 {return with special completion code} { + list [catch {tproc error} msg] $msg $errorInfo $errorCode +} {1 abc {abc + while executing +"tproc error"} NONE} +test proc-old-7.3 {return with special completion code} { + list [catch {tproc return} msg] $msg +} {2 abc} +test proc-old-7.4 {return with special completion code} { + list [catch {tproc break} msg] $msg +} {3 abc} +test proc-old-7.5 {return with special completion code} { + list [catch {tproc continue} msg] $msg +} {4 abc} +test proc-old-7.6 {return with special completion code} { + list [catch {tproc -14} msg] $msg +} {-14 abc} +test proc-old-7.7 {return with special completion code} { + list [catch {tproc gorp} msg] $msg +} {1 {bad completion code "gorp": must be ok, error, return, break, continue, or an integer}} +test proc-old-7.8 {return with special completion code} { + list [catch {tproc 10b} msg] $msg +} {1 {bad completion code "10b": must be ok, error, return, break, continue, or an integer}} +test proc-old-7.9 {return with special completion code} { + proc tproc2 {} { + tproc return + } + list [catch tproc2 msg] $msg +} {0 abc} +test proc-old-7.10 {return with special completion code} { + proc tproc2 {} { + return -code error + } + list [catch tproc2 msg] $msg +} {1 {}} +test proc-old-7.11 {return with special completion code} { + proc tproc2 {} { + global errorCode errorInfo + catch {open _bad_file_name r} msg + return -code error -errorinfo $errorInfo -errorcode $errorCode $msg + } + normalizeMsg [list [catch tproc2 msg] $msg $errorInfo $errorCode] +} {1 {couldn't open "_bad_file_name": no such file or directory} {couldn't open "_bad_file_name": no such file or directory + while executing +"open _bad_file_name r" + invoked from within +"tproc2"} {posix enoent {no such file or directory}}} +test proc-old-7.12 {return with special completion code} { + proc tproc2 {} { + global errorCode errorInfo + catch {open _bad_file_name r} msg + return -code error -errorcode $errorCode $msg + } + normalizeMsg [list [catch tproc2 msg] $msg $errorInfo $errorCode] +} {1 {couldn't open "_bad_file_name": no such file or directory} {couldn't open "_bad_file_name": no such file or directory + while executing +"tproc2"} {posix enoent {no such file or directory}}} +test proc-old-7.13 {return with special completion code} { + proc tproc2 {} { + global errorCode errorInfo + catch {open _bad_file_name r} msg + return -code error -errorinfo $errorInfo $msg + } + normalizeMsg [list [catch tproc2 msg] $msg $errorInfo $errorCode] +} {1 {couldn't open "_bad_file_name": no such file or directory} {couldn't open "_bad_file_name": no such file or directory + while executing +"open _bad_file_name r" + invoked from within +"tproc2"} none} +test proc-old-7.14 {return with special completion code} { + proc tproc2 {} { + global errorCode errorInfo + catch {open _bad_file_name r} msg + return -code error $msg + } + normalizeMsg [list [catch tproc2 msg] $msg $errorInfo $errorCode] +} {1 {couldn't open "_bad_file_name": no such file or directory} {couldn't open "_bad_file_name": no such file or directory + while executing +"tproc2"} none} +test proc-old-7.14 {return with special completion code} { + list [catch {return -badOption foo message} msg] $msg +} {1 {bad option "-badOption": must be -code, -errorcode, or -errorinfo}} + +test proc-old-8.1 {unset and undefined local arrays} { + proc t1 {} { + foreach v {xxx, yyy} { + catch {unset $v} + } + set yyy(foo) bar + } + t1 +} bar + +test proc-old-9.1 {empty command name} { + catch {rename {} ""} + proc t1 {args} { + return + } + set v [t1] + catch {$v} +} 1 + +test proc-old-10.1 {ByteCode epoch change during recursive proc execution} { + proc t1 x { + set y 20 + rename expr expr.old + rename expr.old expr + if $x then {t1 0} ;# recursive call after foo's code is invalidated + return 20 + } + t1 1 +} 20 + +catch {rename t1 ""} +catch {rename foo ""} diff --git a/tests/proc.test b/tests/proc.test new file mode 100644 index 0000000..eeace97 --- /dev/null +++ b/tests/proc.test @@ -0,0 +1,163 @@ +# This file contains tests for the tclProc.c source file. Tests appear in +# the same order as the C code that they test. The set of tests is +# currently incomplete since it includes only new tests, in particular +# tests for code changed for the addition of Tcl namespaces. Other +# procedure-related tests appear in other test files such as proc-old.test. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) proc.test 1.11 97/08/12 13:31:43 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {eval namespace delete [namespace children :: test_ns_*]} +catch {rename p ""} +catch {rename {} ""} +catch {unset msg} + +test proc-1.1 {Tcl_ProcObjCmd, put proc in namespace specified in name, if any} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 { + namespace eval baz {} + } + proc test_ns_1::baz::p {} { + return "p in [namespace current]" + } + list [test_ns_1::baz::p] \ + [namespace eval test_ns_1 {baz::p}] \ + [info commands test_ns_1::baz::*] +} {{p in ::test_ns_1::baz} {p in ::test_ns_1::baz} ::test_ns_1::baz::p} +test proc-1.2 {Tcl_ProcObjCmd, namespace specified in proc name must exist} { + catch {eval namespace delete [namespace children :: test_ns_*]} + list [catch {proc test_ns_1::baz::p {} {}} msg] $msg +} {1 {can't create procedure "test_ns_1::baz::p": unknown namespace}} +test proc-1.3 {Tcl_ProcObjCmd, empty proc name} { + catch {eval namespace delete [namespace children :: test_ns_*]} + proc :: {} { + return "empty called" + } + list [::] \ + [info body {}] +} {{empty called} { + return "empty called" + }} +test proc-1.4 {Tcl_ProcObjCmd, simple proc name and proc defined in namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 { + namespace eval baz { + proc p {} { + return "p in [namespace current]" + } + } + } + list [test_ns_1::baz::p] \ + [info commands test_ns_1::baz::*] +} {{p in ::test_ns_1::baz} ::test_ns_1::baz::p} +test proc-1.5 {Tcl_ProcObjCmd, qualified proc name and proc defined in namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1::baz {} + namespace eval test_ns_1 { + proc baz::p {} { + return "p in [namespace current]" + } + } + list [test_ns_1::baz::p] \ + [info commands test_ns_1::baz::*] \ + [namespace eval test_ns_1::baz {namespace which p}] +} {{p in ::test_ns_1::baz} ::test_ns_1::baz::p ::test_ns_1::baz::p} +test proc-1.6 {Tcl_ProcObjCmd, namespace code ignores single ":"s in middle or end of command names} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 { + proc q: {} {return "q:"} + proc value:at: {} {return "value:at:"} + } + list [namespace eval test_ns_1 {q:}] \ + [namespace eval test_ns_1 {value:at:}] \ + [test_ns_1::q:] \ + [test_ns_1::value:at:] \ + [lsort [info commands test_ns_1::*]] \ + [namespace eval test_ns_1 {namespace which q:}] \ + [namespace eval test_ns_1 {namespace which value:at:}] +} {q: value:at: q: value:at: {::test_ns_1::q: ::test_ns_1::value:at:} ::test_ns_1::q: ::test_ns_1::value:at:} +test proc-1.7 {Tcl_ProcObjCmd, check that formal parameter names are not array elements} { + catch {rename p ""} + list [catch {proc p {a(1) a(2)} { + set z [expr $a(1)+$a(2)] + puts "$z=z, $a(1)=$a(1)" + }} msg] $msg +} {1 {procedure "p" has formal parameter "a(1)" that is an array element}} + +test proc-2.1 {TclFindProc, simple proc name and proc not in namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename p ""} + proc p {} {return "p in [namespace current]"} + info body p +} {return "p in [namespace current]"} +test proc-2.2 {TclFindProc, simple proc name and proc defined in namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1 { + namespace eval baz { + proc p {} {return "p in [namespace current]"} + } + } + namespace eval test_ns_1::baz {info body p} +} {return "p in [namespace current]"} +test proc-2.3 {TclFindProc, qualified proc name and proc defined in namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1::baz {} + namespace eval test_ns_1 { + proc baz::p {} {return "p in [namespace current]"} + } + namespace eval test_ns_1 {info body baz::p} +} {return "p in [namespace current]"} +test proc-2.4 {TclFindProc, global proc and executing in namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename p ""} + proc p {} {return "global p"} + namespace eval test_ns_1::baz {info body p} +} {return "global p"} + +test proc-3.1 {TclObjInterpProc, proc defined and executing in same namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + proc p {} {return "p in [namespace current]"} + p +} {p in ::} +test proc-3.2 {TclObjInterpProc, proc defined and executing in same namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + namespace eval test_ns_1::baz { + proc p {} {return "p in [namespace current]"} + p + } +} {p in ::test_ns_1::baz} +test proc-3.3 {TclObjInterpProc, proc defined and executing in different namespaces} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename p ""} + proc p {} {return "p in [namespace current]"} + namespace eval test_ns_1::baz { + p + } +} {p in ::} +test proc-3.4 {TclObjInterpProc, procs execute in the namespace in which they were defined unless renamed into new namespace} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename p ""} + namespace eval test_ns_1::baz { + proc p {} {return "p in [namespace current]"} + rename ::test_ns_1::baz::p ::p + list [p] [namespace which p] + } +} {{p in ::} ::p} +test proc-3.5 {TclObjInterpProc, any old result is reset before appending error msg about missing arguments} { + proc p {x} {info commands 3m} + list [catch {p} msg] $msg +} {1 {no value given for parameter "x" to "p"}} + +catch {eval namespace delete [namespace children :: test_ns_*]} +catch {rename p ""} +catch {rename {} ""} +catch {unset msg} diff --git a/tests/pwd.test b/tests/pwd.test new file mode 100644 index 0000000..e283799 --- /dev/null +++ b/tests/pwd.test @@ -0,0 +1,22 @@ +# Commands covered: pwd +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) pwd.test 1.2 97/08/13 23:06:41 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test pwd-1.1 {simple pwd} { + catch pwd +} 0 +test pwd-1.2 {simple pwd} { + expr [string length pwd]>0 +} 1 diff --git a/tests/regexp.test b/tests/regexp.test new file mode 100644 index 0000000..5fb785b --- /dev/null +++ b/tests/regexp.test @@ -0,0 +1,318 @@ +# Commands covered: regexp, regsub +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) regexp.test 1.21 96/12/23 13:59:48 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {unset foo} +test regexp-1.1 {basic regexp operation} { + regexp ab*c abbbc +} 1 +test regexp-1.2 {basic regexp operation} { + regexp ab*c ac +} 1 +test regexp-1.3 {basic regexp operation} { + regexp ab*c ab +} 0 +test regexp-1.4 {basic regexp operation} { + regexp -- -gorp abc-gorpxxx +} 1 +test regexp-1.5 {basic regexp operation} { + regexp {^([^ ]*)[ ]*([^ ]*)} "" a +} 1 + +test regexp-2.1 {getting substrings back from regexp} { + set foo {} + list [regexp ab*c abbbbc foo] $foo +} {1 abbbbc} +test regexp-2.2 {getting substrings back from regexp} { + set foo {} + set f2 {} + list [regexp a(b*)c abbbbc foo f2] $foo $f2 +} {1 abbbbc bbbb} +test regexp-2.3 {getting substrings back from regexp} { + set foo {} + set f2 {} + list [regexp a(b*)(c) abbbbc foo f2] $foo $f2 +} {1 abbbbc bbbb} +test regexp-2.4 {getting substrings back from regexp} { + set foo {} + set f2 {} + set f3 {} + list [regexp a(b*)(c) abbbbc foo f2 f3] $foo $f2 $f3 +} {1 abbbbc bbbb c} +test regexp-2.5 {getting substrings back from regexp} { + set foo {}; set f1 {}; set f2 {}; set f3 {}; set f4 {}; set f5 {}; + set f6 {}; set f7 {}; set f8 {}; set f9 {}; set fa {}; set fb {}; + list [regexp (1*)(2*)(3*)(4*)(5*)(6*)(7*)(8*)(9*)(a*)(b*) \ + 12223345556789999aabbb \ + foo f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb] $foo $f1 $f2 $f3 $f4 $f5 \ + $f6 $f7 $f8 $f9 $fa $fb +} {1 12223345556789999aabbb 1 222 33 4 555 6 7 8 9999 aa bbb} +test regexp-2.6 {getting substrings back from regexp} { + set foo 2; set f2 2; set f3 2; set f4 2 + list [regexp (a)(b)? xay foo f2 f3 f4] $foo $f2 $f3 $f4 +} {1 a a {} {}} +test regexp-2.7 {getting substrings back from regexp} { + set foo 1; set f2 1; set f3 1; set f4 1 + list [regexp (a)(b)?(c) xacy foo f2 f3 f4] $foo $f2 $f3 $f4 +} {1 ac a {} c} + + +test regexp-3.1 {-indices option to regexp} { + set foo {} + list [regexp -indices ab*c abbbbc foo] $foo +} {1 {0 5}} +test regexp-3.2 {-indices option to regexp} { + set foo {} + set f2 {} + list [regexp -indices a(b*)c abbbbc foo f2] $foo $f2 +} {1 {0 5} {1 4}} +test regexp-3.3 {-indices option to regexp} { + set foo {} + set f2 {} + list [regexp -indices a(b*)(c) abbbbc foo f2] $foo $f2 +} {1 {0 5} {1 4}} +test regexp-3.4 {-indices option to regexp} { + set foo {} + set f2 {} + set f3 {} + list [regexp -indices a(b*)(c) abbbbc foo f2 f3] $foo $f2 $f3 +} {1 {0 5} {1 4} {5 5}} +test regexp-3.5 {-indices option to regexp} { + set foo {}; set f1 {}; set f2 {}; set f3 {}; set f4 {}; set f5 {}; + set f6 {}; set f7 {}; set f8 {}; set f9 {} + list [regexp -indices (1*)(2*)(3*)(4*)(5*)(6*)(7*)(8*)(9*) \ + 12223345556789999 \ + foo f1 f2 f3 f4 f5 f6 f7 f8 f9] $foo $f1 $f2 $f3 $f4 $f5 \ + $f6 $f7 $f8 $f9 +} {1 {0 16} {0 0} {1 3} {4 5} {6 6} {7 9} {10 10} {11 11} {12 12} {13 16}} +test regexp-3.6 {getting substrings back from regexp} { + set foo 2; set f2 2; set f3 2; set f4 2 + list [regexp -indices (a)(b)? xay foo f2 f3 f4] $foo $f2 $f3 $f4 +} {1 {1 1} {1 1} {-1 -1} {-1 -1}} +test regexp-3.7 {getting substrings back from regexp} { + set foo 1; set f2 1; set f3 1; set f4 1 + list [regexp -indices (a)(b)?(c) xacy foo f2 f3 f4] $foo $f2 $f3 $f4 +} {1 {1 2} {1 1} {-1 -1} {2 2}} + +test regexp-4.1 {-nocase option to regexp} { + regexp -nocase foo abcFOo +} 1 +test regexp-4.2 {-nocase option to regexp} { + set f1 22 + set f2 33 + set f3 44 + list [regexp -nocase {a(b*)([xy]*)z} aBbbxYXxxZ22 f1 f2 f3] $f1 $f2 $f3 +} {1 aBbbxYXxxZ Bbb xYXxx} +test regexp-4.3 {-nocase option to regexp} { + regexp -nocase FOo abcFOo +} 1 +set x abcdefghijklmnopqrstuvwxyz1234567890 +set x $x$x$x$x$x$x$x$x$x$x$x$x +test regexp-4.4 {case conversion in regsub} { + list [regexp -nocase $x $x foo] $foo +} "1 $x" +unset x + +test regexp-5.1 {exercise cache of compiled expressions} { + regexp .*a b + regexp .*b c + regexp .*c d + regexp .*d e + regexp .*e f + regexp .*a bbba +} 1 +test regexp-5.2 {exercise cache of compiled expressions} { + regexp .*a b + regexp .*b c + regexp .*c d + regexp .*d e + regexp .*e f + regexp .*b xxxb +} 1 +test regexp-5.3 {exercise cache of compiled expressions} { + regexp .*a b + regexp .*b c + regexp .*c d + regexp .*d e + regexp .*e f + regexp .*c yyyc +} 1 +test regexp-5.4 {exercise cache of compiled expressions} { + regexp .*a b + regexp .*b c + regexp .*c d + regexp .*d e + regexp .*e f + regexp .*d 1d +} 1 +test regexp-5.5 {exercise cache of compiled expressions} { + regexp .*a b + regexp .*b c + regexp .*c d + regexp .*d e + regexp .*e f + regexp .*e xe +} 1 + +test regexp-6.1 {regexp errors} { + list [catch {regexp a} msg] $msg +} {1 {wrong # args: should be "regexp ?switches? exp string ?matchVar? ?subMatchVar subMatchVar ...?"}} +test regexp-6.2 {regexp errors} { + list [catch {regexp -nocase a} msg] $msg +} {1 {wrong # args: should be "regexp ?switches? exp string ?matchVar? ?subMatchVar subMatchVar ...?"}} +test regexp-6.3 {regexp errors} { + list [catch {regexp -gorp a} msg] $msg +} {1 {bad switch "-gorp": must be -indices, -nocase, or --}} +test regexp-6.4 {regexp errors} { + list [catch {regexp a( b} msg] $msg +} {1 {couldn't compile regular expression pattern: unmatched ()}} +test regexp-6.5 {regexp errors} { + list [catch {regexp a( b} msg] $msg +} {1 {couldn't compile regular expression pattern: unmatched ()}} +test regexp-6.6 {regexp errors} { + list [catch {regexp a a f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1} msg] $msg +} {0 1} +test regexp-6.7 {regexp errors} { + list [catch {regexp (x)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.)(.) xyzzy} msg] $msg +} {1 {couldn't compile regular expression pattern: too many ()}} +test regexp-6.8 {regexp errors} { + set f1 44 + list [catch {regexp abc abc f1(f2)} msg] $msg +} {1 {couldn't set variable "f1(f2)"}} + +test regexp-7.1 {basic regsub operation} { + list [regsub aa+ xaxaaaxaa 111&222 foo] $foo +} {1 xax111aaa222xaa} +test regexp-7.2 {basic regsub operation} { + list [regsub aa+ aaaxaa &111 foo] $foo +} {1 aaa111xaa} +test regexp-7.3 {basic regsub operation} { + list [regsub aa+ xaxaaa 111& foo] $foo +} {1 xax111aaa} +test regexp-7.4 {basic regsub operation} { + list [regsub aa+ aaa 11&2&333 foo] $foo +} {1 11aaa2aaa333} +test regexp-7.5 {basic regsub operation} { + list [regsub aa+ xaxaaaxaa &2&333 foo] $foo +} {1 xaxaaa2aaa333xaa} +test regexp-7.6 {basic regsub operation} { + list [regsub aa+ xaxaaaxaa 1&22& foo] $foo +} {1 xax1aaa22aaaxaa} +test regexp-7.7 {basic regsub operation} { + list [regsub a(a+) xaxaaaxaa {1\122\1} foo] $foo +} {1 xax1aa22aaxaa} +test regexp-7.8 {basic regsub operation} { + list [regsub a(a+) xaxaaaxaa {1\\\122\1} foo] $foo +} "1 {xax1\\aa22aaxaa}" +test regexp-7.9 {basic regsub operation} { + list [regsub a(a+) xaxaaaxaa {1\\122\1} foo] $foo +} "1 {xax1\\122aaxaa}" +test regexp-7.10 {basic regsub operation} { + list [regsub a(a+) xaxaaaxaa {1\\&\1} foo] $foo +} "1 {xax1\\aaaaaxaa}" +test regexp-7.11 {basic regsub operation} { + list [regsub a(a+) xaxaaaxaa {1\&\1} foo] $foo +} {1 xax1&aaxaa} +test regexp-7.12 {basic regsub operation} { + list [regsub a(a+) xaxaaaxaa {\1\1\1\1&&} foo] $foo +} {1 xaxaaaaaaaaaaaaaaxaa} +test regexp-7.13 {basic regsub operation} { + set foo xxx + list [regsub abc xyz 111 foo] $foo +} {0 xyz} +test regexp-7.14 {basic regsub operation} { + set foo xxx + list [regsub ^ xyz "111 " foo] $foo +} {1 {111 xyz}} +test regexp-7.15 {basic regsub operation} { + set foo xxx + list [regsub -- -foo abc-foodef "111 " foo] $foo +} {1 {abc111 def}} +test regexp-7.16 {basic regsub operation} { + set foo xxx + list [regsub x "" y foo] $foo +} {0 {}} + +test regexp-8.1 {case conversion in regsub} { + list [regsub -nocase a(a+) xaAAaAAay & foo] $foo +} {1 xaAAaAAay} +test regexp-8.2 {case conversion in regsub} { + list [regsub -nocase a(a+) xaAAaAAay & foo] $foo +} {1 xaAAaAAay} +test regexp-8.3 {case conversion in regsub} { + set foo 123 + list [regsub a(a+) xaAAaAAay & foo] $foo +} {0 xaAAaAAay} +test regexp-8.4 {case conversion in regsub} { + set foo 123 + list [regsub -nocase a CaDE b foo] $foo +} {1 CbDE} +test regexp-8.5 {case conversion in regsub} { + set foo 123 + list [regsub -nocase XYZ CxYzD b foo] $foo +} {1 CbD} +test regexp-8.6 {case conversion in regsub} { + set x abcdefghijklmnopqrstuvwxyz1234567890 + set x $x$x$x$x$x$x$x$x$x$x$x$x + set foo 123 + list [regsub -nocase $x $x b foo] $foo +} {1 b} + +test regexp-9.1 {-all option to regsub} { + set foo 86 + list [regsub -all x+ axxxbxxcxdx |&| foo] $foo +} {4 a|xxx|b|xx|c|x|d|x|} +test regexp-9.2 {-all option to regsub} { + set foo 86 + list [regsub -nocase -all x+ aXxXbxxcXdx |&| foo] $foo +} {4 a|XxX|b|xx|c|X|d|x|} +test regexp-9.3 {-all option to regsub} { + set foo 86 + list [regsub x+ axxxbxxcxdx |&| foo] $foo +} {1 a|xxx|bxxcxdx} +test regexp-9.4 {-all option to regsub} { + set foo 86 + list [regsub -all bc axxxbxxcxdx |&| foo] $foo +} {0 axxxbxxcxdx} +test regexp-9.5 {-all option to regsub} { + set foo xxx + list [regsub -all node "node node more" yy foo] $foo +} {2 {yy yy more}} +test regexp-9.6 {-all option to regsub} { + set foo xxx + list [regsub -all ^ xxx 123 foo] $foo +} {1 123xxx} + +test regexp-10.1 {regsub errors} { + list [catch {regsub a b c} msg] $msg +} {1 {wrong # args: should be "regsub ?switches? exp string subSpec varName"}} +test regexp-10.2 {regsub errors} { + list [catch {regsub -nocase a b c} msg] $msg +} {1 {wrong # args: should be "regsub ?switches? exp string subSpec varName"}} +test regexp-10.3 {regsub errors} { + list [catch {regsub -nocase -all a b c} msg] $msg +} {1 {wrong # args: should be "regsub ?switches? exp string subSpec varName"}} +test regexp-10.4 {regsub errors} { + list [catch {regsub a b c d e f} msg] $msg +} {1 {wrong # args: should be "regsub ?switches? exp string subSpec varName"}} +test regexp-10.5 {regsub errors} { + list [catch {regsub -gorp a b c} msg] $msg +} {1 {bad switch "-gorp": must be -all, -nocase, or --}} +test regexp-10.6 {regsub errors} { + list [catch {regsub -nocase a( b c d} msg] $msg +} {1 {couldn't compile regular expression pattern: unmatched ()}} +test regexp-10.7 {regsub errors} { + list [catch {regsub -nocase aaa aaa xxx f1(f2)} msg] $msg +} {1 {couldn't set variable "f1(f2)"}} diff --git a/tests/registry.test b/tests/registry.test new file mode 100644 index 0000000..605c84b --- /dev/null +++ b/tests/registry.test @@ -0,0 +1,512 @@ +# registry.test -- +# +# This file contains a collection of tests for the registry command. +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# In order for these tests to run, the registry package must be on the +# auto_path or the registry package must have been loaded already. +# +# Copyright (c) 1997 by Sun Microsystems, Inc. All rights reserved. +# +# SCCS: @(#) registry.test 1.5 97/08/01 11:14:25 + +if {$tcl_platform(platform) != "windows"} { + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +if [catch {package require registry}] { + puts "Unable to find the registry package. Skipping registry tests." + return +} + +if {$testConfig(win32s)} { + puts "Skipping registry tests under Win32s" + return +} + +switch $tcl_platform(os) { + "Windows NT" {set testConfig(NT) 1} + "Windows 95" {set testConfig(95) 1} +} + +set hostname [info hostname] + +test registry-1.1 {argument parsing for registry command} { + list [catch {registry} msg] $msg +} {1 {wrong # args: should be "registry option ?arg arg ...?"}} +test registry-1.2 {argument parsing for registry command} { + list [catch {registry foo} msg] $msg +} {1 {bad option "foo": must be delete, get, keys, set, type, or values}} + +test registry-1.3 {argument parsing for registry command} { + list [catch {registry d} msg] $msg +} {1 {wrong # args: should be "registry delete keyName ?valueName?"}} +test registry-1.4 {argument parsing for registry command} { + list [catch {registry delete} msg] $msg +} {1 {wrong # args: should be "registry delete keyName ?valueName?"}} +test registry-1.5 {argument parsing for registry command} { + list [catch {registry delete foo bar baz} msg] $msg +} {1 {wrong # args: should be "registry delete keyName ?valueName?"}} + +test registry-1.6 {argument parsing for registry command} { + list [catch {registry g} msg] $msg +} {1 {wrong # args: should be "registry get keyName valueName"}} +test registry-1.7 {argument parsing for registry command} { + list [catch {registry get} msg] $msg +} {1 {wrong # args: should be "registry get keyName valueName"}} +test registry-1.8 {argument parsing for registry command} { + list [catch {registry get foo} msg] $msg +} {1 {wrong # args: should be "registry get keyName valueName"}} +test registry-1.9 {argument parsing for registry command} { + list [catch {registry get foo bar baz} msg] $msg +} {1 {wrong # args: should be "registry get keyName valueName"}} + +test registry-1.10 {argument parsing for registry command} { + list [catch {registry k} msg] $msg +} {1 {wrong # args: should be "registry keys keyName ?pattern?"}} +test registry-1.11 {argument parsing for registry command} { + list [catch {registry keys} msg] $msg +} {1 {wrong # args: should be "registry keys keyName ?pattern?"}} +test registry-1.12 {argument parsing for registry command} { + list [catch {registry keys foo bar baz} msg] $msg +} {1 {wrong # args: should be "registry keys keyName ?pattern?"}} + +test registry-1.13 {argument parsing for registry command} { + list [catch {registry s} msg] $msg +} {1 {wrong # args: should be "registry set keyName ?valueName data ?type??"}} +test registry-1.14 {argument parsing for registry command} { + list [catch {registry set} msg] $msg +} {1 {wrong # args: should be "registry set keyName ?valueName data ?type??"}} +test registry-1.15 {argument parsing for registry command} { + list [catch {registry set foo bar} msg] $msg +} {1 {wrong # args: should be "registry set keyName ?valueName data ?type??"}} +test registry-1.16 {argument parsing for registry command} { + list [catch {registry set foo bar baz blat gorp} msg] $msg +} {1 {wrong # args: should be "registry set keyName ?valueName data ?type??"}} + +test registry-1.17 {argument parsing for registry command} { + list [catch {registry t} msg] $msg +} {1 {wrong # args: should be "registry type keyName valueName"}} +test registry-1.18 {argument parsing for registry command} { + list [catch {registry type} msg] $msg +} {1 {wrong # args: should be "registry type keyName valueName"}} +test registry-1.19 {argument parsing for registry command} { + list [catch {registry type foo} msg] $msg +} {1 {wrong # args: should be "registry type keyName valueName"}} +test registry-1.20 {argument parsing for registry command} { + list [catch {registry type foo bar baz} msg] $msg +} {1 {wrong # args: should be "registry type keyName valueName"}} + +test registry-1.21 {argument parsing for registry command} { + list [catch {registry v} msg] $msg +} {1 {wrong # args: should be "registry values keyName ?pattern?"}} +test registry-1.22 {argument parsing for registry command} { + list [catch {registry values} msg] $msg +} {1 {wrong # args: should be "registry values keyName ?pattern?"}} +test registry-1.23 {argument parsing for registry command} { + list [catch {registry values foo bar baz} msg] $msg +} {1 {wrong # args: should be "registry values keyName ?pattern?"}} + +test registry-2.1 {DeleteKey: bad key} { + list [catch {registry delete foo} msg] $msg +} {1 {bad root name "foo": must be HKEY_LOCAL_MACHINE, HKEY_USERS, HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, or HKEY_CURRENT_CONFIG}} +test registry-2.2 {DeleteKey: bad key} { + list [catch {registry delete HKEY_CLASSES_ROOT} msg] $msg +} {1 {bad key: cannot delete root keys}} +test registry-2.3 {DeleteKey: bad key} { + list [catch {registry delete HKEY_CLASSES_ROOT\\} msg] $msg +} {1 {bad key: cannot delete root keys}} +test registry-2.4 {DeleteKey: subkey at root level} { + registry set HKEY_CLASSES_ROOT\\TclFoobar + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry keys HKEY_CLASSES_ROOT TclFoobar +} {} +test registry-2.5 {DeleteKey: subkey below root level} { + registry set HKEY_CLASSES_ROOT\\TclFoobar\\test + registry delete HKEY_CLASSES_ROOT\\TclFoobar\\test + set result [registry keys HKEY_CLASSES_ROOT TclFoobar\\test] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {} +test registry-2.6 {DeleteKey: recursive delete} { + registry set HKEY_CLASSES_ROOT\\TclFoobar\\test1 + registry set HKEY_CLASSES_ROOT\\TclFoobar\\test2\\test3 + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result [registry keys HKEY_CLASSES_ROOT TclFoobar] + set result +} {} +test registry-2.7 {DeleteKey: trailing backslashes} { + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz + list [catch {registry delete HKEY_CLASSES_ROOT\\TclFoobar\\} msg] $msg +} {1 {unable to delete key: The configuration registry key is invalid.}} +test registry-2.8 {DeleteKey: failure} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry delete HKEY_CLASSES_ROOT\\TclFoobar +} {} + + +test registry-3.1 {DeleteValue} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz test1 blort + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz test2 blat + registry delete HKEY_CLASSES_ROOT\\TclFoobar\\baz test1 + set result [registry values HKEY_CLASSES_ROOT\\TclFoobar\\baz] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} test2 +test registry-3.2 {DeleteValue: bad key} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + list [catch {registry delete HKEY_CLASSES_ROOT\\TclFoobar test} msg] $msg +} {1 {unable to open key: The system cannot find the file specified.}} +test registry-3.3 {DeleteValue: bad value} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz test2 blort + set result [list [catch {registry delete HKEY_CLASSES_ROOT\\TclFoobar test1} msg] $msg] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {1 {unable to delete value "test1" from key "HKEY_CLASSES_ROOT\TclFoobar": The system cannot find the file specified.}} + + +test registry-4.1 {GetKeyNames: bad key} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + list [catch {registry keys HKEY_CLASSES_ROOT\\TclFoobar} msg] $msg +} {1 {unable to open key: The system cannot find the file specified.}} +test registry-4.2 {GetKeyNames} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz + set result [registry keys HKEY_CLASSES_ROOT\\TclFoobar] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {baz} +test registry-4.3 {GetKeyNames: remote key} {nonPortable} { + registry set \\\\$hostname\\HKEY_CLASSES_ROOT\\TclFoobar\\baz + set result [registry keys \\\\gaspode\\HKEY_CLASSES_ROOT\\TclFoobar] + registry delete \\\\$hostname\\HKEY_CLASSES_ROOT\\TclFoobar + set result +} {baz} +test registry-4.4 {GetKeyNames: empty key} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar + set result [registry keys HKEY_CLASSES_ROOT\\TclFoobar] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {} +test registry-4.5 {GetKeyNames: patterns} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz + registry set HKEY_CLASSES_ROOT\\TclFoobar\\blat + registry set HKEY_CLASSES_ROOT\\TclFoobar\\foo + set result [lsort [registry keys HKEY_CLASSES_ROOT\\TclFoobar b*]] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {baz blat} +test registry-4.6 {GetKeyNames: names with spaces} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz\ bar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\blat + registry set HKEY_CLASSES_ROOT\\TclFoobar\\foo + set result [lsort [registry keys HKEY_CLASSES_ROOT\\TclFoobar b*]] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {{baz bar} blat} + +test registry-5.1 {GetType} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + list [catch {registry type HKEY_CLASSES_ROOT\\TclFoobar val1} msg] $msg +} {1 {unable to open key: The system cannot find the file specified.}} +test registry-5.2 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar + list [catch {registry type HKEY_CLASSES_ROOT\\TclFoobar val1} msg] $msg +} {1 {unable to get type of value "val1" from key "HKEY_CLASSES_ROOT\TclFoobar": The system cannot find the file specified.}} +test registry-5.3 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar none + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} none +test registry-5.4 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} sz +test registry-5.5 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar sz + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} sz +test registry-5.6 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar expand_sz + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} expand_sz +test registry-5.7 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 binary + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} binary +test registry-5.8 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 dword + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} dword +test registry-5.9 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 dword_big_endian + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} dword_big_endian +test registry-5.10 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 link + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} link +test registry-5.11 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar multi_sz + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} multi_sz +test registry-5.12 {GetType} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 resource_list + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} resource_list +test registry-5.13 {GetType: unknown types} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 24 + set result [registry type HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} 24 + +test registry-6.1 {GetValue} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + list [catch {registry get HKEY_CLASSES_ROOT\\TclFoobar val1} msg] $msg +} {1 {unable to open key: The system cannot find the file specified.}} +test registry-6.2 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar + list [catch {registry get HKEY_CLASSES_ROOT\\TclFoobar val1} msg] $msg +} {1 {unable to get value "val1" from key "HKEY_CLASSES_ROOT\TclFoobar": The system cannot find the file specified.}} +test registry-6.3 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar none + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} foobar +test registry-6.4 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} foobar +test registry-6.5 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar sz + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} foobar +test registry-6.6 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar expand_sz + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} foobar +test registry-6.7 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 binary + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} 1 +test registry-6.8 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 0x20 dword + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} 32 +test registry-6.9 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 0x20 dword_big_endian + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} 32 +test registry-6.10 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 link + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} 1 +test registry-6.11 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 foobar multi_sz + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} foobar +test registry-6.12 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 {foo\ bar baz} multi_sz + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {{foo bar} baz} +test registry-6.13 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 {} multi_sz + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {} +test registry-6.14 {GetValue: truncation of multivalues with null elements} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 {a {} b} multi_sz + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} a +test registry-6.15 {GetValue} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 resource_list + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} 1 +test registry-6.16 {GetValue: unknown types} { + registry set HKEY_CLASSES_ROOT\\TclFoobar val1 1 24 + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar val1] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} 1 + +test registry-7.1 {GetValueNames: bad key} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + list [catch {registry values HKEY_CLASSES_ROOT\\TclFoobar} msg] $msg +} {1 {unable to open key: The system cannot find the file specified.}} +test registry-7.2 {GetValueNames} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar baz foobar + set result [registry values HKEY_CLASSES_ROOT\\TclFoobar] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} baz +test registry-7.3 {GetValueNames} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar baz foobar1 + registry set HKEY_CLASSES_ROOT\\TclFoobar blat foobar2 + registry set HKEY_CLASSES_ROOT\\TclFoobar {} foobar3 + set result [lsort [registry values HKEY_CLASSES_ROOT\\TclFoobar]] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {{} baz blat} +test registry-7.4 {GetValueNames: remote key} {nonPortable} { + registry set \\\\$hostname\\HKEY_CLASSES_ROOT\\TclFoobar baz blat + set result [registry values \\\\gaspode\\HKEY_CLASSES_ROOT\\TclFoobar] + registry delete \\\\$hostname\\HKEY_CLASSES_ROOT\\TclFoobar + set result +} baz +test registry-7.5 {GetValueNames: empty key} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar + set result [registry values HKEY_CLASSES_ROOT\\TclFoobar] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {} +test registry-7.6 {GetValueNames: patterns} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar baz foobar1 + registry set HKEY_CLASSES_ROOT\\TclFoobar blat foobar2 + registry set HKEY_CLASSES_ROOT\\TclFoobar foo foobar3 + set result [lsort [registry values HKEY_CLASSES_ROOT\\TclFoobar b*]] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {baz blat} +test registry-7.7 {GetValueNames: names with spaces} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar baz\ bar foobar1 + registry set HKEY_CLASSES_ROOT\\TclFoobar blat foobar2 + registry set HKEY_CLASSES_ROOT\\TclFoobar foo foobar3 + set result [lsort [registry values HKEY_CLASSES_ROOT\\TclFoobar b*]] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {{baz bar} blat} + +test registry-8.1 {OpenSubKey} {nonPortable} { + list [catch {registry keys {\\petrouchka\HKEY_LOCAL_MACHINE}} msg] $msg +} {1 {unable to open key: Access is denied.}} +test registry-8.2 {OpenSubKey} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar + set result [registry keys HKEY_CLASSES_ROOT TclFoobar] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} TclFoobar +test registry-8.3 {OpenSubKey} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + list [catch {registry keys HKEY_CLASSES_ROOT\\TclFoobar} msg] $msg +} {1 {unable to open key: The system cannot find the file specified.}} + +test registry-9.1 {ParseKeyName: bad keys} { + list [catch {registry values \\} msg] $msg +} "1 {bad key \"\\\": must start with a valid root}" +test registry-9.2 {ParseKeyName: bad keys} { + list [catch {registry values \\foobar} msg] $msg +} {1 {bad key "\foobar": must start with a valid root}} +test registry-9.3 {ParseKeyName: bad keys} { + list [catch {registry values \\\\} msg] $msg +} {1 {ambiguous root name "": must be HKEY_LOCAL_MACHINE, HKEY_USERS, HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, or HKEY_CURRENT_CONFIG}} +test registry-9.4 {ParseKeyName: bad keys} { + list [catch {registry values \\\\\\} msg] $msg +} {1 {ambiguous root name "": must be HKEY_LOCAL_MACHINE, HKEY_USERS, HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, or HKEY_CURRENT_CONFIG}} +test registry-9.5 {ParseKeyName: bad keys} { + list [catch {registry values \\\\\\HKEY_CLASSES_ROOT} msg] $msg +} {1 {unable to open key: The network address is invalid.}} +test registry-9.6 {ParseKeyName: bad keys} { + list [catch {registry values \\\\gaspode} msg] $msg +} {1 {ambiguous root name "": must be HKEY_LOCAL_MACHINE, HKEY_USERS, HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, or HKEY_CURRENT_CONFIG}} +test registry-9.7 {ParseKeyName: bad keys} { + list [catch {registry values foobar} msg] $msg +} {1 {bad root name "foobar": must be HKEY_LOCAL_MACHINE, HKEY_USERS, HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, or HKEY_CURRENT_CONFIG}} +test registry-9.8 {ParseKeyName: null keys} { + list [catch {registry delete HKEY_CLASSES_ROOT\\} msg] $msg +} {1 {bad key: cannot delete root keys}} +test registry-9.9 {ParseKeyName: null keys} { + list [catch {registry keys HKEY_CLASSES_ROOT\\TclFoobar\\baz} msg] $msg +} {1 {unable to open key: The system cannot find the file specified.}} + +test registry-10.1 {RecursiveDeleteKey} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\test1 + registry set HKEY_CLASSES_ROOT\\TclFoobar\\test2\\test3 + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result [registry keys HKEY_CLASSES_ROOT TclFoobar] + set result +} {} +test registry-10.2 {RecursiveDeleteKey} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\test1 + registry set HKEY_CLASSES_ROOT\\TclFoobar\\test2\\test3 + set result [registry delete HKEY_CLASSES_ROOT\\TclFoobar\\test2\\test4] + registry delete HKEY_CLASSES_ROOT\\TclFoobar + set result +} {} + +test registry-11.1 {SetValue: recursive creation} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz blat foobar + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar\\baz blat] +} foobar +test registry-11.2 {SetValue: modification} { + registry delete HKEY_CLASSES_ROOT\\TclFoobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz blat foobar + registry set HKEY_CLASSES_ROOT\\TclFoobar\\baz blat frob + set result [registry get HKEY_CLASSES_ROOT\\TclFoobar\\baz blat] +} frob +test registry-11.3 {SetValue: failure} {nonPortable} { + list [catch {registry set {\\petrouchka\HKEY_CLASSES_ROOT\TclFoobar} bar foobar} msg] $msg +} {1 {unable to open key: Access is denied.}} + + +unset hostname diff --git a/tests/rename.test b/tests/rename.test new file mode 100644 index 0000000..05f5938 --- /dev/null +++ b/tests/rename.test @@ -0,0 +1,172 @@ +# Commands covered: rename +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) rename.test 1.20 97/06/24 17:26:23 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Must eliminate the "unknown" command while the test is running, +# especially if the test is being run in a program with its +# own special-purpose unknown command. + +catch {rename unknown unknown.old} + +catch {rename r2 {}} +proc r1 {} {return "procedure r1"} +rename r1 r2 +test rename-1.1 {simple renaming} { + r2 +} {procedure r1} +test rename-1.2 {simple renaming} { + list [catch r1 msg] $msg +} {1 {invalid command name "r1"}} +rename r2 {} +test rename-1.3 {simple renaming} { + list [catch r2 msg] $msg +} {1 {invalid command name "r2"}} + +# The test below is tricky because it renames a built-in command. +# It's possible that the test procedure uses this command, so must +# restore the command before calling test again. + +rename list l.new +set a [catch list msg1] +set b [l.new a b c] +rename l.new list +set c [catch l.new msg2] +set d [list 111 222] +test rename-2.1 {renaming built-in command} { + list $a $msg1 $b $c $msg2 $d +} {1 {invalid command name "list"} {a b c} 1 {invalid command name "l.new"} {111 222}} + +test rename-3.1 {error conditions} { + list [catch {rename r1} msg] $msg $errorCode +} {1 {wrong # args: should be "rename oldName newName"} NONE} +test rename-3.2 {error conditions} { + list [catch {rename r1 r2 r3} msg] $msg $errorCode +} {1 {wrong # args: should be "rename oldName newName"} NONE} +test rename-3.3 {error conditions} { + proc r1 {} {} + proc r2 {} {} + list [catch {rename r1 r2} msg] $msg +} {1 {can't rename to "r2": command already exists}} +test rename-3.4 {error conditions} { + catch {rename r1 {}} + catch {rename r2 {}} + list [catch {rename r1 r2} msg] $msg +} {1 {can't rename "r1": command doesn't exist}} +test rename-3.5 {error conditions} { + catch {rename _non_existent_command {}} + list [catch {rename _non_existent_command {}} msg] $msg +} {1 {can't delete "_non_existent_command": command doesn't exist}} + +catch {rename unknown {}} +catch {rename unknown.old unknown} + +if {[info command testdel] == "testdel"} { + test rename-4.1 {reentrancy issues with command deletion and renaming} { + set x {} + testdel {} foo {lappend x deleted; rename bar {}; lappend x [info command bar]} + rename foo bar + lappend x | + rename bar {} + set x + } {| deleted {}} + test rename-4.2 {reentrancy issues with command deletion and renaming} { + set x {} + testdel {} foo {lappend x deleted; rename foo bar} + rename foo {} + set x + } {deleted} + test rename-4.3 {reentrancy issues with command deletion and renaming} { + set x {} + testdel {} foo {lappend x deleted; testdel {} foo {lappend x deleted2}} + rename foo {} + lappend x | + rename foo {} + set x + } {deleted | deleted2} + test rename-4.4 {reentrancy issues with command deletion and renaming} { + set x {} + testdel {} foo {lappend x deleted; rename foo bar} + rename foo {} + lappend x | [info command bar] + } {deleted | {}} + test rename-4.5 {reentrancy issues with command deletion and renaming} { + set env(value) before + interp create foo + testdel foo cmd {set env(value) deleted} + interp delete foo + set env(value) + } {deleted} + test rename-4.6 {reentrancy issues with command deletion and renaming} { + proc kill args { + interp delete foo + } + set env(value) before + interp create foo + foo alias kill kill + testdel foo cmd {set env(value) deleted; kill} + list [catch {foo eval {rename cmd {}}} msg] $msg $env(value) + } {0 {} deleted} + test rename-4.7 {reentrancy issues with command deletion and renaming} { + proc kill args { + interp delete foo + } + set env(value) before + interp create foo + foo alias kill kill + testdel foo cmd {set env(value) deleted; kill} + list [catch {interp delete foo} msg] $msg $env(value) + } {0 {} deleted} +} + +# Save the unknown procedure which is modified by the following test. + +catch {rename unknown unknown.old} + +test rename-5.1 {repeated rename deletion and redefinition of same command} { + set SAVED_UNKNOWN "proc unknown " + append SAVED_UNKNOWN "\{[info args unknown.old]\} " + append SAVED_UNKNOWN "\{[info body unknown.old]\}" + + for {set i 0} {$i < 10} {incr i} { + eval $SAVED_UNKNOWN + tcl_wordBreakBefore "" 0 + rename tcl_wordBreakBefore {} + rename unknown {} + } +} {} + +catch {rename unknown {}} +catch {rename unknown.old unknown} + + +test rename-6.1 {old code invalidated (epoch incremented) when cmd with compile proc is renamed } { + proc x {} { + set a 123 + set b [incr a] + } + x + rename incr incr.old + proc incr {} {puts "new incr called!"} + catch {x} msg + set msg +} {called "incr" with too many arguments} + +catch {rename incr {}} +catch {rename incr.old incr} + +# Make the file return an empty string (cleaner.). + +set x "" + diff --git a/tests/resource.test b/tests/resource.test new file mode 100644 index 0000000..e815ef8 --- /dev/null +++ b/tests/resource.test @@ -0,0 +1,341 @@ +# Commands covered: resource +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) resource.test 1.8 97/11/06 12:36:32 + +# Only run this test on Macintosh systems +if {$tcl_platform(platform) != "macintosh"} { + return +} +if {[string compare test [info procs test]] == 1} then {source defs} + +test resource-1.1 {resource tests} { + list [catch {resource} msg] $msg +} {1 {wrong # args: should be "resource option ?arg ...?"}} +test resource-1.2 {resource tests} { + list [catch {resource _bad_} msg] $msg +} {1 {bad option "_bad_": must be close, delete, files, list, open, read, types, or write}} + +# resource open & close tests +test resource-2.1 {resource open & close tests} { + list [catch {resource open} msg] $msg +} {1 {wrong # args: should be "resource open fileName ?permissions?"}} +test resource-2.2 {resource open & close tests} { + list [catch {resource open resource.test r extraArg} msg] $msg +} {1 {wrong # args: should be "resource open fileName ?permissions?"}} +test resource-2.3 {resource open & close tests} { + list [catch {resource open resource.test bad_perms} msg] $msg +} {1 {illegal access mode "bad_perms"}} +test resource-2.4 {resource open & close tests} { + list [catch {resource open _bad_file_} msg] $msg +} {1 {file does not exist}} +test resource-2.5 {resource open & close tests} { + testWriteTextResource -rsrc fileRsrcName -file rsrc.file {error "don't source me"} + set id [resource open rsrc.file] + resource close $id + file delete rsrc.file +} {} +test resource-2.6 {resource open & close tests} { + catch {file delete rsrc.file} + testWriteTextResource -rsrc fileRsrcName -file rsrc.file {error "don't source me"} + set id [resource open rsrc.file] + set result [string compare [resource open rsrc.file] $id] + resource close $id + file delete rsrc.file + set result +} {0} +test resource-2.7 {resource open & close tests} { + list [catch {resource close} msg] $msg +} {1 {wrong # args: should be "resource close resourceRef"}} +test resource-2.8 {resource open & close tests} { + list [catch {resource close foo bar} msg] $msg +} {1 {wrong # args: should be "resource close resourceRef"}} +test resource-2.9 {resource open & close tests} { + list [catch {resource close _bad_resource_} msg] $msg +} {1 {invalid resource file reference "_bad_resource_"}} +test resource-2.10 {resource open & close tests} { + set result [catch {resource close System} mssg] + lappend result $mssg +} {1 {can't close "System" resource file}} +test resource-2.11 {resource open & close tests} { + set result [catch {resource close application} mssg] + lappend result $mssg +} {1 {can't close "application" resource file}} + +# Tests for listing resources +test resource-3.1 {resource list tests} { + list [catch {resource list} msg] $msg +} {1 {wrong # args: should be "resource list resourceType ?resourceRef?"}} +test resource-3.2 {resource list tests} { + list [catch {resource list _bad_type_} msg] $msg +} {1 {expected Macintosh OS type but got "_bad_type_"}} +test resource-3.3 {resource list tests} { + list [catch {resource list TEXT _bad_ref_} msg] $msg +} {1 {invalid resource file reference "_bad_ref_"}} +test resource-3.4 {resource list tests} { + list [catch {resource list TEXT _bad_ref_ extraArg} msg] $msg +} {1 {wrong # args: should be "resource list resourceType ?resourceRef?"}} +test resource-3.5 {resource list tests} { + catch {file delete rsrc.file} + testWriteTextResource -rsrc fileRsrcName -file rsrc.file {error "don't source me"} + set id [resource open rsrc.file] + catch "resource list TEXT $id" result + resource close $id + set result +} {fileRsrcName} +test resource-3.6 {resource list tests} { + # There should not be any resource of this type + resource list XXXX +} {} +test resource-3.7 {resource list tests} { + set resourceList [resource list STR#] + if {[lsearch $resourceList {Tcl Environment Variables}] == -1} { + set result {couldn't find resource that should exist} + } else { + set result ok + } +} {ok} + +# Tests for reading resources +test resource-4.1 {resource read tests} { + list [catch {resource read} msg] $msg +} {1 {wrong # args: should be "resource read resourceType resourceId ?resourceRef?"}} +test resource-4.2 {resource read tests} { + list [catch {resource read TEXT} msg] $msg +} {1 {wrong # args: should be "resource read resourceType resourceId ?resourceRef?"}} +test resource-4.3 {resource read tests} { + list [catch {resource read STR# {_non_existant_resource_}} msg] $msg +} {1 {could not load resource}} +test resource-4.4 {resource read tests} { + # The following resource should exist and load OK without error + catch {resource read STR# {Tcl Environment Variables}} +} {0} + +# Tests for getting resource types +test resource-5.1 {resource types tests} { + list [catch {resource types _bad_ref_} msg] $msg +} {1 {invalid resource file reference "_bad_ref_"}} +test resource-5.2 {resource types tests} { + list [catch {resource types _bad_ref_ extraArg} msg] $msg +} {1 {wrong # args: should be "resource types ?resourceRef?"}} +test resource-5.3 {resource types tests} { + # This should never cause an error + catch {resource types} +} {0} +test resource-5.4 {resource types tests} { + testWriteTextResource -rsrc fileRsrcName -file rsrc.file {error "don't source me"} + set id [resource open rsrc.file] + set result [resource types $id] + resource close $id + set result +} {TEXT} + +# resource write tests +test resource-6.1 {resource write tests} { + list [catch {resource write} msg] $msg +} {1 {wrong # args: should be "resource write ?-id resourceId? ?-name resourceName? ?-file resourceRef? ?-force? resourceType data"}} +test resource-6.2 {resource write tests} { + list [catch {resource write _bad_type_ data} msg] $msg +} {1 {expected Macintosh OS type but got "_bad_type_"}} +test resource-6.3 {resource write tests} { + catch {file delete rsrc2.file} + set id [resource open rsrc2.file w] + resource close $id + set id [resource open rsrc2.file r] + set result [catch {resource write -file $id -name Hello TEXT foo} errMsg] + lappend result [string compare $errMsg "cannot write to resource file \"$id\", it was opened read only"] + lappend result [lsearch [resource list TEXT $id] Hello] + resource close $id + file delete rsrc2.file + set result +} {1 0 -1} +test resource-6.4 {resource write tests} { + catch {file delete rsrc2.file} + set id [resource open rsrc2.file w] + resource write -file $id -name Hello TEXT {set x "our test data"} + source -rsrc Hello rsrc2.file + resource close $id + file delete rsrc2.file + set x +} {our test data} +test resource-6.5 {resource write tests} { + catch {file delete rsrc2.file} + set id [resource open rsrc2.file w] + resource write -file $id -id 256 TEXT {HAHAHAHAHAHAHA} + set result [catch {resource write -file $id -id 256 TEXT {HOHOHOHOHOHO}} mssg] + resource close $id + file delete rsrc2.file + lappend result $mssg +} {1 {the resource 256 already exists, use "-force" to overwrite it.}} +test resource-6.6 {resource write tests} { + catch {file delete rsrc2.file} + testWriteTextResource -rsrc fileRsrcName -rsrcid 256 -file rsrc2.file -protected {error "don't tread on me"} + set id [resource open rsrc2.file w] + set result [catch {resource write -id 256 -force -file $id TEXT {NAHNAHNANAHNAH}} mssg] + resource close $id + file delete rsrc2.file + lappend result $mssg +} {1 {could not write resource id 256 of type TEXT, it was protected.}} +test resource-6.7 {resource write tests} { + catch {file delete rsrc2.file} + set id [resource open rsrc2.file w] + resource write -file $id -id 256 -name FOO TEXT {set x [list "our first test data"]} + resource write -file $id -id 256 -name BAR -force TEXT {set x [list "our second test data"]} + source -rsrcid 256 rsrc2.file + lappend x [resource list TEXT $id] + resource close $id + file delete rsrc2.file + set x +} {{our second test data} BAR} + +#Tests for listing open resource files +test resource-7.1 {resource file tests} { + catch {resource files foo bar} mssg + set mssg +} {wrong # args: should be "resource files ?resourceId?"} +test resource-7.2 {resource file tests} { + catch {file delete rsrc2.file} + set rsrcFiles [resource files] + set id [resource open rsrc2.file w] + set result [string compare $rsrcFiles [lrange [resource files] 1 end]] + lappend result [string compare $id [lrange [resource files] 0 0]] + resource close $id + file delete rsrc2.file + set result +} {0 0} +test resource-7.3 {resource file tests} { + set result 0 + foreach file [resource files] { + if {[catch {resource types $file}] != 0} { + set result 1 + } + } + set result +} {0} +test resource-7.4 {resource file tests} { + catch {resource files __NO_SUCH_RESOURCE__} mssg + set mssg +} {invalid resource file reference "__NO_SUCH_RESOURCE__"} +test resource-7.5 {resource file tests} { + set sys [resource files System] + string compare $sys [file join $env(SYS_FOLDER) System] +} {0} +test resource-7.6 {resource file tests} { + set app [resource files application] + string compare $app [info nameofexecutable] +} {0} + +#Tests for the resource delete command +test resource-8.1 {resource delete tests} { + list [catch {resource delete} msg] $msg +} {1 {wrong # args: should be "resource delete ?-id resourceId? ?-name resourceName? ?-file resourceRef? resourceType"}} +test resource-8.2 {resource delete tests} { + list [catch {resource delete TEXT} msg] $msg +} {1 {you must specify either "-id" or "-name" or both to "resource delete"}} +test resource-8.3 {resource delete tests} { + set result [catch {resource delete -file ffffff -id 128 TEXT} mssg] + lappend result $mssg +} {1 {invalid resource file reference "ffffff"}} +test resource-8.4 {resource delete tests} { + catch {file delete rsrc2.file} + testWriteTextResource -rsrc fileRsrcName -rsrcid 128 -file rsrc2.file {Some stuff} + set id [resource open rsrc2.file r] + set result [catch {resource delete -id 128 -file $id TEXT} mssg] + resource close $id + file delete rsrc2.file + lappend result [string compare $mssg "cannot delete from resource file \"$id\", it was opened read only"] +} {1 0} +test resource-8.5 {resource delete tests} { + catch {file delete rsrc2.file} + testWriteTextResource -rsrc fileRsrcName -rsrcid 128 -file rsrc2.file {Some stuff} + set id [resource open rsrc2.file w] + set result [catch {resource delete -id 128 -file $id _bad_type_} mssg] + resource close $id + file delete rsrc2.file + lappend result $mssg +} {1 {expected Macintosh OS type but got "_bad_type_"}} +test resource-8.5 {resource delete tests} { + catch {file delete rsrc2.file} + set id [resource open rsrc2.file w] + set result [catch {resource delete -id 128 -file $id TEXT} mssg] + resource close $id + file delete rsrc2.file + lappend result $mssg +} {1 {resource not found}} +test resource-8.6 {resource delete tests} { + catch {file delete rsrc2.file} + set id [resource open rsrc2.file w] + set result [catch {resource delete -name foo -file $id TEXT} mssg] + resource close $id + file delete rsrc2.file + lappend result $mssg +} {1 {resource not found}} +test resource-8.7 {resource delete tests} { + catch {file delete rsrc2.file} + set id [resource open rsrc2.file w] + resource write -file $id -name foo -id 128 TEXT {some stuff} + resource write -file $id -name bar -id 129 TEXT {some stuff} + set result [catch {resource delete -name foo -id 129 -file $id TEXT} mssg] + resource close $id + file delete rsrc2.file + lappend result $mssg +} {1 {"-id" and "-name" values do not point to the same resource}} +test resource-8.8 {resource delete tests} { + catch {file delete rsrc2.file} + testWriteTextResource -rsrc fileRsrcName -rsrcid 256 -file rsrc2.file -protected {error "don't tread on me"} + set id [resource open rsrc2.file w] + set result [catch {resource delete -id 256 -file $id TEXT } mssg] + resource close $id + file delete rsrc2.file + lappend result $mssg +} {1 {resource cannot be deleted: it is protected.}} +test resource-8.9 {resource delete tests} { + catch {file delete rsrc2.file} + testWriteTextResource -rsrc fileRsrcName -rsrcid 128 -file rsrc2.file {Some stuff} + set id [resource open rsrc2.file w] + set result [resource list TEXT $id] + resource delete -id 128 -file $id TEXT + lappend result [resource list TEXT $id] + resource close $id + file delete rsrc2.file + set result +} {fileRsrcName {}} + +# Tests for the Mac version of the source command +catch {file delete rsrc.file} +testWriteTextResource -rsrc fileRsrcName -rsrcid 128 \ + -file rsrc.file {set rsrc_foo 1} +test resource-9.1 {source command} { + catch {unset rsrc_foo} + source -rsrc fileRsrcName rsrc.file + list [catch {set rsrc_foo} msg] $msg +} {0 1} +test resource-9.2 {source command} { + catch {unset rsrc_foo} + list [catch {source -rsrc no_resource rsrc.file} msg] $msg +} {1 {The resource "no_resource" could not be loaded from rsrc.file.}} +test resource-9.3 {source command} { + catch {unset rsrc_foo} + source -rsrcid 128 rsrc.file + list [catch {set rsrc_foo} msg] $msg +} {0 1} +test resource-9.4 {source command} { + catch {unset rsrc_foo} + list [catch {source -rsrcid bad_int rsrc.file} msg] $msg +} {1 {expected integer but got "bad_int"}} +test resource-9.5 {source command} { + catch {unset rsrc_foo} + list [catch {source -rsrcid 100 rsrc.file} msg] $msg +} {1 {The resource "ID=100" could not be loaded from rsrc.file.}} + +# Clean up and return +catch {file delete rsrc.file} +return diff --git a/tests/safe.test b/tests/safe.test new file mode 100644 index 0000000..c23f06a --- /dev/null +++ b/tests/safe.test @@ -0,0 +1,433 @@ +# safe.test -- +# +# This file contains a collection of tests for safe Tcl, packages loading, +# and using safe interpreters. Sourcing this file into tcl runs the tests +# and generates output for errors. No output means no errors were found. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) safe.test 1.34 97/11/19 14:59:13 + +if {[string compare test [info procs test]] == 1} then {source defs} + +foreach i [interp slaves] { + interp delete $i +} + +# Force actual loading of the safe package +# because we use un exported (and thus un-autoindexed) APIs +# in this test result arguments: +catch {safe::interpConfigure} + +proc equiv {x} {return $x} + +test safe-1.1 {safe::interpConfigure syntax} { + list [catch {safe::interpConfigure} msg] $msg; +} {1 {no value given for parameter "slave" (use -help for full usage) : + slave name () name of the slave}} + +test safe-1.2 {safe::interpCreate syntax} { + list [catch {safe::interpCreate -help} msg] $msg; +} {1 {Usage information: + Var/FlagName Type Value Help + ------------ ---- ----- ---- + ( -help gives this help ) + ?slave? name () name of the slave (optional) + -accessPath list () access path for the slave + -noStatics boolflag (false) prevent loading of statically linked pkgs + -statics boolean (true) loading of statically linked pkgs + -nestedLoadOk boolflag (false) allow nested loading + -nested boolean (false) nested loading + -deleteHook script () delete hook}} + +test safe-1.3 {safe::interpInit syntax} { + list [catch {safe::interpInit -noStatics} msg] $msg; +} {1 {bad value "-noStatics" for parameter + slave name () name of the slave}} + + +test safe-2.1 {creating interpreters, should have no aliases} { + interp aliases +} "" +test safe-2.2 {creating interpreters, should have no aliases} { + catch {safe::interpDelete a} + interp create a + set l [a aliases] + safe::interpDelete a + set l +} "" +test safe-2.3 {creating safe interpreters, should have no aliases} { + catch {safe::interpDelete a} + interp create a -safe + set l [a aliases] + interp delete a + set l +} "" + +test safe-3.1 {calling safe::interpInit is safe} { + catch {safe::interpDelete a} + interp create a -safe + safe::interpInit a + catch {interp eval a exec ls} msg + safe::interpDelete a + set msg +} {invalid command name "exec"} +test safe-3.2 {calling safe::interpCreate on trusted interp} { + catch {safe::interpDelete a} + safe::interpCreate a + set l [lsort [a aliases]] + safe::interpDelete a + set l +} {exit file load source} +test safe-3.3 {calling safe::interpCreate on trusted interp} { + catch {safe::interpDelete a} + safe::interpCreate a + set x [interp eval a {source [file join $tcl_library init.tcl]}] + safe::interpDelete a + set x +} "" +test safe-3.4 {calling safe::interpCreate on trusted interp} { + catch {safe::interpDelete a} + safe::interpCreate a + catch {set x \ + [interp eval a {source [file join $tcl_library init.tcl]}]} msg + safe::interpDelete a + list $x $msg +} {{} {}} + +test safe-4.1 {safe::interpDelete} { + catch {safe::interpDelete a} + interp create a + safe::interpDelete a +} "" +test safe-4.2 {safe::interpDelete, indirectly} { + catch {safe::interpDelete a} + interp create a + a alias exit safe::interpDelete a + a eval exit +} "" +test safe-4.3 {safe::interpDelete, state array (not a public api)} { + catch {safe::interpDelete a} + namespace eval safe {set [InterpStateName a](foo) 33} + # not an error anymore to call it if interp is already + # deleted, to make trhings smooth if it's called twice... + catch {safe::interpDelete a} m1 + catch {namespace eval safe {set [InterpStateName a](foo)}} m2 + list $m1 $m2 +} "{}\ + {can't read \"[safe::InterpStateName a]\": no such variable}" + + +test safe-4.4 {safe::interpDelete, state array, indirectly (not a public api)} { + catch {safe::interpDelete a} + safe::interpCreate a + namespace eval safe {set [InterpStateName a](foo) 33} + a eval exit + catch {namespace eval safe {set [InterpStateName a](foo)}} msg +} 1 + +test safe-4.5 {safe::interpDelete} { + catch {safe::interpDelete a} + safe::interpCreate a + catch {safe::interpCreate a} msg + set msg +} {interpreter named "a" already exists, cannot create} +test safe-4.6 {safe::interpDelete, indirectly} { + catch {safe::interpDelete a} + safe::interpCreate a + a eval exit +} "" + +# The following test checks whether the definition of tcl_endOfWord can be +# obtained from auto_loading. + +test safe-5.1 {test auto-loading in safe interpreters} { + catch {safe::interpDelete a} + safe::interpCreate a + set r [catch {interp eval a {tcl_endOfWord "" 0}} msg] + safe::interpDelete a + list $r $msg +} {0 -1} + +# test safe interps 'information leak' +proc SI {} { + global I + set I [interp create -safe]; +} +proc DI {} { + global I; + interp delete $I; +} +test safe-6.1 {test safe interpreters knowledge of the world} { + SI; set r [lsort [$I eval {info globals}]]; DI; set r +} {tcl_interactive tcl_patchLevel tcl_platform tcl_version} +test safe-6.2 {test safe interpreters knowledge of the world} { + SI; set r [$I eval {info script}]; DI; set r +} {} +test safe-6.3 {test safe interpreters knowledge of the world} { + SI; set r [lsort [$I eval {array names tcl_platform}]]; DI; set r +} {byteOrder platform} + +# more test should be added to check that hostname, nameofexecutable, +# aren't leaking infos, but they still do... + +# high level general test +test safe-7.1 {tests that everything works at high level} { + set i [safe::interpCreate]; + # no error shall occur: + # (because the default access_path shall include 1st level sub dirs + # so package require in a slave works like in the master) + set v [interp eval $i {package require http 1}] + # no error shall occur: + interp eval $i {http_config}; + safe::interpDelete $i + set v +} 1.0 + +test safe-7.2 {tests specific path and interpFind/AddToAccessPath} { + set i [safe::interpCreate -nostat -nested 1 -accessPath [list [info library]]]; + # should not add anything (p0) + set token1 [safe::interpAddToAccessPath $i [info library]] + # should add as p1 + set token2 [safe::interpAddToAccessPath $i "/dummy/unixlike/test/path"]; + # an error shall occur (http is not anymore in the secure 0-level + # provided deep path) + list $token1 $token2 \ + [catch {interp eval $i {package require http 1}} msg] $msg \ + [safe::interpConfigure $i]\ + [safe::interpDelete $i] +} "{\$p(:0:)} {\$p(:1:)} 1 {can't find package http 1} {-accessPath {[list $tcl_library /dummy/unixlike/test/path]} -statics 0 -nested 1 -deleteHook {}} {}" + + +# test source control on file name +test safe-8.1 {safe source control on file} { + set i "a"; + catch {safe::interpDelete $i} + safe::interpCreate $i; + list [catch {$i eval {source}} msg] \ + $msg \ + [safe::interpDelete $i] ; +} {1 {wrong # args: should be "source fileName"} {}} + +# test source control on file name +test safe-8.2 {safe source control on file} { + set i "a"; + catch {safe::interpDelete $i} + safe::interpCreate $i; + list [catch {$i eval {source}} msg] \ + $msg \ + [safe::interpDelete $i] ; +} {1 {wrong # args: should be "source fileName"} {}} + +test safe-8.3 {safe source control on file} { + set i "a"; + catch {safe::interpDelete $i} + safe::interpCreate $i; + set log {}; + proc safe-test-log {str} {global log; lappend log $str} + set prevlog [safe::setLogCmd]; + safe::setLogCmd safe-test-log; + list [catch {$i eval {source .}} msg] \ + $msg \ + $log \ + [safe::setLogCmd $prevlog; unset log] \ + [safe::interpDelete $i] ; +} {1 {permission denied} {{ERROR for slave a : ".": is a directory}} {} {}} + + +test safe-8.4 {safe source control on file} { + set i "a"; + catch {safe::interpDelete $i} + safe::interpCreate $i; + set log {}; + proc safe-test-log {str} {global log; lappend log $str} + set prevlog [safe::setLogCmd]; + safe::setLogCmd safe-test-log; + list [catch {$i eval {source /abc/def}} msg] \ + $msg \ + $log \ + [safe::setLogCmd $prevlog; unset log] \ + [safe::interpDelete $i] ; +} {1 {permission denied} {{ERROR for slave a : "/abc/def": not in access_path}} {} {}} + + +test safe-8.5 {safe source control on file} { + set i "a"; + catch {safe::interpDelete $i} + safe::interpCreate $i; + set log {}; + proc safe-test-log {str} {global log; lappend log $str} + set prevlog [safe::setLogCmd]; + safe::setLogCmd safe-test-log; + list [catch {$i eval {source [file join [info lib] blah]}} msg] \ + $msg \ + $log \ + [safe::setLogCmd $prevlog; unset log] \ + [safe::interpDelete $i] ; +} "1 {blah: must be a *.tcl or tclIndex} {{ERROR for slave a : [file join [info library] blah]:blah: must be a *.tcl or tclIndex}} {} {}" + + +test safe-8.6 {safe source control on file} { + set i "a"; + catch {safe::interpDelete $i} + safe::interpCreate $i; + set log {}; + proc safe-test-log {str} {global log; lappend log $str} + set prevlog [safe::setLogCmd]; + safe::setLogCmd safe-test-log; + list [catch {$i eval {source [file join [info lib] blah.tcl]}} msg] \ + $msg \ + $log \ + [safe::setLogCmd $prevlog; unset log] \ + [safe::interpDelete $i] ; +} "1 {no such file or directory} {{ERROR for slave a : [file join [info library] blah.tcl]:no such file or directory}} {} {}" + + +test safe-8.7 {safe source control on file} { + set i "a"; + catch {safe::interpDelete $i} + safe::interpCreate $i; + set log {}; + proc safe-test-log {str} {global log; lappend log $str} + set prevlog [safe::setLogCmd]; + safe::setLogCmd safe-test-log; + list [catch {$i eval {source [file join [info lib] xxxxxxxxxxx.tcl]}}\ + msg] \ + $msg \ + $log \ + [safe::setLogCmd $prevlog; unset log] \ + [safe::interpDelete $i] ; +} "1 {xxxxxxxxxxx.tcl: filename too long} {{ERROR for slave a : [file join [info library] xxxxxxxxxxx.tcl]:xxxxxxxxxxx.tcl: filename too long}} {} {}" + +test safe-8.8 {safe source forbids -rsrc} { + set i "a"; + catch {safe::interpDelete $i} + safe::interpCreate $i; + list [catch {$i eval {source -rsrc Init}} msg] \ + $msg \ + [safe::interpDelete $i] ; +} {1 {wrong # args: should be "source fileName"} {}} + + +test safe-9.1 {safe interps' deleteHook} { + set i "a"; + catch {safe::interpDelete $i} + set res {} + proc testDelHook {args} { + global res; + # the interp still exists at that point + interp eval a {set delete 1} + # mark that we've been here (successfully) + set res $args; + } + safe::interpCreate $i -deleteHook "testDelHook arg1 arg2"; + list [interp eval $i exit] $res +} {{} {arg1 arg2 a}} + +test safe-9.2 {safe interps' error in deleteHook} { + set i "a"; + catch {safe::interpDelete $i} + set res {} + proc testDelHook {args} { + global res; + # the interp still exists at that point + interp eval a {set delete 1} + # mark that we've been here (successfully) + set res $args; + # create an exception + error "being catched"; + } + set log {}; + proc safe-test-log {str} {global log; lappend log $str} + safe::interpCreate $i -deleteHook "testDelHook arg1 arg2"; + set prevlog [safe::setLogCmd]; + safe::setLogCmd safe-test-log; + list [safe::interpDelete $i] $res \ + $log \ + [safe::setLogCmd $prevlog; unset log]; +} {{} {arg1 arg2 a} {{NOTICE for slave a : About to delete} {ERROR for slave a : Delete hook error (being catched)} {NOTICE for slave a : Deleted}} {}} + + +test safe-9.3 {dual specification of statics} { + list [catch {safe::interpCreate -stat true -nostat} msg] $msg +} {1 {conflicting values given for -statics and -noStatics}} + +test safe-9.4 {dual specification of statics} { + # no error shall occur + safe::interpDelete [safe::interpCreate -stat false -nostat] +} {} + +test safe-9.5 {dual specification of nested} { + list [catch {safe::interpCreate -nested 0 -nestedload} msg] $msg +} {1 {conflicting values given for -nested and -nestedLoadOk}} + +test safe-9.6 {interpConfigure widget like behaviour} { + # this test shall work, don't try to "fix it" unless + # you *really* know what you are doing (ie you are me :p) -- dl + list [set i [safe::interpCreate \ + -noStatics \ + -nestedLoadOk \ + -deleteHook {foo bar}]; + safe::interpConfigure $i -accessPath /foo/bar ; + safe::interpConfigure $i]\ + [safe::interpConfigure $i -aCCess]\ + [safe::interpConfigure $i -nested]\ + [safe::interpConfigure $i -statics]\ + [safe::interpConfigure $i -DEL]\ + [safe::interpConfigure $i -accessPath /blah -statics 1; + safe::interpConfigure $i]\ + [safe::interpConfigure $i -deleteHook toto -nosta -nested 0; + safe::interpConfigure $i] +} {{-accessPath /foo/bar -statics 0 -nested 1 -deleteHook {foo bar}} {-accessPath /foo/bar} {-nested 1} {-statics 0} {-deleteHook {foo bar}} {-accessPath /blah -statics 1 -nested 1 -deleteHook {foo bar}} {-accessPath /blah -statics 0 -nested 0 -deleteHook toto}} + + +# testing that nested and statics do what is advertised +# (we use a static package : Tcltest) + +if {[catch {package require Tcltest} msg]} { + puts "This application hasn't been compiled with Tcltest" + puts "skipping remining safe test that relies on it." +} else { + + # we use the Tcltest package , which has no Safe_Init + +test safe-10.1 {testing statics loading} { + set i [safe::interpCreate] + list \ + [catch {interp eval $i {load {} Tcltest}} msg] \ + $msg \ + [safe::interpDelete $i]; +} {1 {can't use package in a safe interpreter: no Tcltest_SafeInit procedure} {}} + +test safe-10.2 {testing statics loading / -nostatics} { + set i [safe::interpCreate -nostatics] + list \ + [catch {interp eval $i {load {} Tcltest}} msg] \ + $msg \ + [safe::interpDelete $i]; +} {1 {permission denied (static package)} {}} + + + +test safe-10.3 {testing nested statics loading / no nested by default} { + set i [safe::interpCreate] + list \ + [catch {interp eval $i {interp create x; load {} Tcltest x}} msg] \ + $msg \ + [safe::interpDelete $i]; +} {1 {permission denied (nested load)} {}} + + +test safe-10.4 {testing nested statics loading / -nestedloadok} { + set i [safe::interpCreate -nestedloadok] + list \ + [catch {interp eval $i {interp create x; load {} Tcltest x}} msg] \ + $msg \ + [safe::interpDelete $i]; +} {1 {can't use package in a safe interpreter: no Tcltest_SafeInit procedure} {}} + + +} diff --git a/tests/scan.test b/tests/scan.test new file mode 100644 index 0000000..50bf876 --- /dev/null +++ b/tests/scan.test @@ -0,0 +1,246 @@ +# Commands covered: scan +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1994 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) scan.test 1.26 97/08/06 08:56:08 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test scan-1.1 {integer scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "-20 1476 \n33 0" "%d %d %d %d" a b c d] $a $b $c $d +} {4 -20 1476 33 0} +test scan-1.2 {integer scanning} { + set a {}; set b {}; set c {} + list [scan "-45 16 7890 +10" "%2d %*d %10d %d" a b c] $a $b $c +} {3 -4 16 7890} +test scan-1.3 {integer scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "-45 16 +10 987" "%ld %d %ld %d" a b c d] $a $b $c $d +} {4 -45 16 10 987} +test scan-1.4 {integer scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "14 1ab 62 10" "%d %x %lo %x" a b c d] $a $b $c $d +} {4 14 427 50 16} +test scan-1.5 {integer scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "12345670 1234567890ab cdefg" "%o %o %x %lx" a b c d] \ + $a $b $c $d +} {4 2739128 342391 561323 52719} +test scan-1.6 {integer scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "ab123-24642" "%2x %3x %3o %2o" a b c d] $a $b $c $d +} {4 171 291 -20 52} +test scan-1.7 {integer scanning} { + set a {}; set b {} + list [scan "1234567 234 567 " "%*3x %x %*o %4o" a b] $a $b +} {2 17767 375} +test scan-1.8 {integer scanning} { + set a {}; set b {} + list [scan "a 1234" "%d %d" a b] $a $b +} {0 {} {}} +test scan-1.9 {integer scanning} { + set a {}; set b {}; set c {}; set d {}; + list [scan "12345678" "%2d %2d %2ld %2d" a b c d] $a $b $c $d +} {4 12 34 56 78} +test scan-1.10 {integer scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "1 2 " "%hd %d %d %d" a b c d] $a $b $c $d +} {2 1 2 {} {}} +# +# The behavior for scaning intergers larger than MAX_INT is +# not defined by the ANSI spec. Some implementations wrap the +# input (-16) some return MAX_INT. +# +test scan-1.11 {integer scanning} {nonPortable} { + set a {}; set b {}; + list [scan "4294967280 4294967280" "%u %d" a b] $a $b +} {2 4294967280 -16} + +test scan-2.1 {floating-point scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "2.1 -3.0e8 .99962 a" "%f%g%e%f" a b c d] $a $b $c $d +} {3 2.1 -300000000.0 0.99962 {}} +test scan-2.2 {floating-point scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "-1.2345 +8.2 9" "%3e %3lf %f %f" a b c d] $a $b $c $d +} {4 -1.0 234.0 5.0 8.2} +test scan-2.3 {floating-point scanning} { + set a {}; set b {}; set c {} + list [scan "1e00004 332E-4 3e+4" "%Lf %*2e %f %f" a b c] $a $c +} {3 10000.0 30000.0} +# +# Some libc implementations consider 3.e- bad input. The ANSI +# spec states that digits must follow the - sign. +# +test scan-2.4 {floating-point scanning} {nonPortable} { + set a {}; set b {}; set c {} + list [scan "1. 47.6 2.e2 3.e-" "%f %*f %f %f" a b c] $a $b $c +} {3 1.0 200.0 3.0} +test scan-2.5 {floating-point scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "4.6 99999.7 876.43e-1 118" "%f %f %f %e" a b c d] $a $b $c $d +} {4 4.6 99999.7 87.643 118.0} +test scan-2.6 {floating-point scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "1.2345 697.0e-3 124 .00005" "%f %e %f %e" a b c d] $a $b $c $d +} {4 1.2345 0.697 124.0 5e-05} +test scan-2.7 {floating-point scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "4.6abc" "%f %f %f %f" a b c d] $a $b $c $d +} {1 4.6 {} {} {}} +test scan-2.8 {floating-point scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "4.6 5.2" "%f %f %f %f" a b c d] $a $b $c $d +} {2 4.6 5.2 {} {}} + +test scan-3.1 {string and character scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "abc defghijk dum " "%s %3s %20s %s" a b c d] $a $b $c $d +} {4 abc def ghijk dum} +test scan-3.2 {string and character scanning} { + set a {}; set b {}; set c {}; set d {} + list [scan "a bcdef" "%c%c%1s %s" a b c d] $a $b $c $d +} {4 97 32 b cdef} +test scan-3.3 {string and character scanning} { + set a {}; set b {}; set c {} + list [scan "123456 test " "%*c%*s %s %s %s" a b c] $a $b $c +} {1 test {} {}} +test scan-3.4 {string and character scanning} { + set a {}; set b {}; set c {}; set d + list [scan "ababcd01234 f 123450" {%4[abcd] %4[abcd] %[^abcdef] %[^0]} a b c d] $a $b $c $d +} {4 abab cd {01234 } {f 12345}} +test scan-3.5 {string and character scanning} { + set a {}; set b {}; set c {} + list [scan "aaaaaabc aaabcdefg + + XYZQR" {%*4[a] %s %*4[a]%s%*4[ +]%c} a b c] $a $b $c +} {3 aabc bcdefg 43} + +test scan-4.1 {error conditions} { + catch {scan a} +} 1 +test scan-4.2 {error conditions} { + catch {scan a} msg + set msg +} {wrong # args: should be "scan string format ?varName varName ...?"} +test scan-4.3 {error conditions} { + catch {scan "1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21" "%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d" a1 a2 a3 a4 a5 a6 a7 a8 a9 a10 a11 a12 a13 a14 a15 a16 a17 a18 a19 a20 a21} +} 1 +test scan-4.4 {error conditions} { + catch {scan "1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21" "%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d" a1 a2 a3 a4 a5 a6 a7 a8 a9 a10 a11 a12 a13 a14 a15 a16 a17 a18 a19 a20 a21} msg + set msg +} {too many fields to scan} +test scan-4.5 {error conditions} { + list [catch {scan a %D} msg] $msg +} {1 {bad scan conversion character "D"}} +test scan-4.6 {error conditions} { + list [catch {scan a %O} msg] $msg +} {1 {bad scan conversion character "O"}} +test scan-4.7 {error conditions} { + list [catch {scan a %X} msg] $msg +} {1 {bad scan conversion character "X"}} +test scan-4.8 {error conditions} { + list [catch {scan a %F} msg] $msg +} {1 {bad scan conversion character "F"}} +test scan-4.9 {error conditions} { + list [catch {scan a %E} msg] $msg +} {1 {bad scan conversion character "E"}} +test scan-4.10 {error conditions} { + list [catch {scan a "%d %d" a} msg] $msg +} {1 {different numbers of variable names and field specifiers}} +test scan-4.11 {error conditions} { + list [catch {scan a "%d %d" a b c} msg] $msg +} {1 {different numbers of variable names and field specifiers}} +test scan-4.12 {error conditions} { + set a {}; set b {}; set c {}; set d {} + list [expr {[scan " a" " a %d %d %d %d" a b c d] <= 0}] $a $b $c $d +} {1 {} {} {} {}} +test scan-4.13 {error conditions} { + set a {}; set b {}; set c {}; set d {} + list [scan "1 2" "%d %d %d %d" a b c d] $a $b $c $d +} {2 1 2 {} {}} +test scan-4.14 {error conditions} { + catch {unset a} + set a(0) 44 + list [catch {scan 44 %d a} msg] $msg +} {1 {couldn't set variable "a"}} +test scan-4.15 {error conditions} { + catch {unset a} + set a(0) 44 + list [catch {scan 44 %c a} msg] $msg +} {1 {couldn't set variable "a"}} +test scan-4.16 {error conditions} { + catch {unset a} + set a(0) 44 + list [catch {scan 44 %s a} msg] $msg +} {1 {couldn't set variable "a"}} +test scan-4.17 {error conditions} { + catch {unset a} + set a(0) 44 + list [catch {scan 44 %f a} msg] $msg +} {1 {couldn't set variable "a"}} +test scan-4.18 {error conditions} { + catch {unset a} + set a(0) 44 + list [catch {scan 44 %f a} msg] $msg +} {1 {couldn't set variable "a"}} +catch {unset a} +test scan-4.19 {error conditions} { + list [catch {scan 44 %2c a} msg] $msg +} {1 {field width may not be specified in %c conversion}} +test scan-4.20 {error conditions} { + list [catch {scan abc {%[}} msg] $msg +} {1 {unmatched [ in format string}} + +test scan-5.1 {lots of arguments} { + scan "10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200" "%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d" a1 a2 a3 a4 a5 a6 a7 a8 a9 a10 a11 a12 a13 a14 a15 a16 a17 a18 a19 a20 +} 20 +test scan-5.2 {lots of arguments} { + scan "10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200" "%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d" a1 a2 a3 a4 a5 a6 a7 a8 a9 a10 a11 a12 a13 a14 a15 a16 a17 a18 a19 a20 + set a20 +} 200 + +test scan-6.1 {miscellaneous tests} { + set a {} + list [scan ab16c ab%dc a] $a +} {1 16} +test scan-6.2 {miscellaneous tests} { + set a {} + list [scan ax16c ab%dc a] $a +} {0 {}} +test scan-6.3 {miscellaneous tests} { + set a {} + list [catch {scan ab%c114 ab%%c%d a} msg] $msg $a +} {0 1 114} +test scan-6.4 {miscellaneous tests} { + set a {} + list [catch {scan ab%c14 ab%%c%d a} msg] $msg $a +} {0 1 14} + +test scan-7.1 {alignment in results array (TCL_ALIGN)} { + scan "123 13.6" "%s %f" a b + set b +} 13.6 +test scan-7.2 {alignment in results array (TCL_ALIGN)} { + scan "1234567 13.6" "%s %f" a b + set b +} 13.6 +test scan-7.3 {alignment in results array (TCL_ALIGN)} { + scan "12345678901 13.6" "%s %f" a b + set b +} 13.6 +test scan-7.4 {alignment in results array (TCL_ALIGN)} { + scan "123456789012345 13.6" "%s %f" a b + set b +} 13.6 +test scan-7.5 {alignment in results array (TCL_ALIGN)} { + scan "1234567890123456789 13.6" "%s %f" a b + set b +} 13.6 diff --git a/tests/set-old.test b/tests/set-old.test new file mode 100644 index 0000000..a101e7b --- /dev/null +++ b/tests/set-old.test @@ -0,0 +1,771 @@ +# Commands covered: set, unset, array +# +# This file includes the original set of tests for Tcl's set command. +# Since the set command is now compiled, a new set of tests covering +# the new implementation is in the file "set.test". Sourcing this file +# into Tcl runs the tests and generates output for errors. +# No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) set-old.test 1.22 97/10/29 14:05:07 + +if {[string compare test [info procs test]] == 1} then {source defs} + +proc ignore args {} + +# Simple variable operations. + +catch {unset a} +test set-old-1.1 {basic variable setting and unsetting} { + set a 22 +} 22 +test set-old-1.2 {basic variable setting and unsetting} { + set a 123 + set a +} 123 +test set-old-1.3 {basic variable setting and unsetting} { + set a xxx + format %s $a +} xxx +test set-old-1.4 {basic variable setting and unsetting} { + set a 44 + unset a + list [catch {set a} msg] $msg +} {1 {can't read "a": no such variable}} + +# Basic array operations. + +catch {unset a} +set a(xyz) 2 +set a(44) 3 +set {a(a long name)} test +test set-old-2.1 {basic array operations} { + lsort [array names a] +} {44 {a long name} xyz} +test set-old-2.2 {basic array operations} { + set a(44) +} 3 +test set-old-2.3 {basic array operations} { + set a(xyz) +} 2 +test set-old-2.4 {basic array operations} { + set "a(a long name)" +} test +test set-old-2.5 {basic array operations} { + list [catch {set a(other)} msg] $msg +} {1 {can't read "a(other)": no such element in array}} +test set-old-2.6 {basic array operations} { + list [catch {set a} msg] $msg +} {1 {can't read "a": variable is array}} +test set-old-2.7 {basic array operations} { + format %s $a(44) +} 3 +test set-old-2.8 {basic array operations} { + format %s $a(a long name) +} test +unset a(44) +test set-old-2.9 {basic array operations} { + lsort [array names a] +} {{a long name} xyz} +test set-old-2.10 {basic array operations} { + catch {unset b} + list [catch {set b(123)} msg] $msg +} {1 {can't read "b(123)": no such variable}} +test set-old-2.11 {basic array operations} { + catch {unset b} + set b 44 + list [catch {set b(123)} msg] $msg +} {1 {can't read "b(123)": variable isn't array}} +test set-old-2.12 {basic array operations} { + list [catch {set a 14} msg] $msg +} {1 {can't set "a": variable is array}} +unset a +test set-old-2.13 {basic array operations} { + list [catch {set a(xyz)} msg] $msg +} {1 {can't read "a(xyz)": no such variable}} + +# Test the set commands, and exercise the corner cases of the code +# that parses array references into two parts. + +test set-old-3.1 {set command} { + list [catch {set} msg] $msg +} {1 {wrong # args: should be "set varName ?newValue?"}} +test set-old-3.2 {set command} { + list [catch {set x y z} msg] $msg +} {1 {wrong # args: should be "set varName ?newValue?"}} +test set-old-3.3 {set command} { + catch {unset a} + list [catch {set a} msg] $msg +} {1 {can't read "a": no such variable}} +test set-old-3.4 {set command} { + catch {unset a} + set a(14) 83 + list [catch {set a 22} msg] $msg +} {1 {can't set "a": variable is array}} + +# Test the corner-cases of parsing array names, using set and unset. + +test set-old-4.1 {parsing array names} { + catch {unset a} + set a(()) 44 + list [catch {array names a} msg] $msg +} {0 ()} +test set-old-4.2 {parsing array names} { + catch {unset a a(abcd} + set a(abcd 33 + info exists a(abcd +} 1 +test set-old-4.3 {parsing array names} { + catch {unset a a(abcd} + set a(abcd 33 + list [catch {array names a} msg] $msg +} {0 {}} +test set-old-4.4 {parsing array names} { + catch {unset a abcd)} + set abcd) 33 + info exists abcd) +} 1 +test set-old-4.5 {parsing array names} { + set a(bcd yyy + catch {unset a} + list [catch {set a(bcd} msg] $msg +} {0 yyy} +test set-old-4.6 {parsing array names} { + catch {unset a} + set a 44 + list [catch {set a(bcd test} msg] $msg +} {0 test} + +# Errors in reading variables + +test set-old-5.1 {errors in reading variables} { + catch {unset a} + list [catch {set a} msg] $msg +} {1 {can't read "a": no such variable}} +test set-old-5.2 {errors in reading variables} { + catch {unset a} + set a 44 + list [catch {set a(18)} msg] $msg +} {1 {can't read "a(18)": variable isn't array}} +test set-old-5.3 {errors in reading variables} { + catch {unset a} + set a(6) 44 + list [catch {set a(18)} msg] $msg +} {1 {can't read "a(18)": no such element in array}} +test set-old-5.4 {errors in reading variables} { + catch {unset a} + set a(6) 44 + list [catch {set a} msg] $msg +} {1 {can't read "a": variable is array}} + +# Errors and other special cases in writing variables + +test set-old-6.1 {creating array during write} { + catch {unset a} + trace var a rwu ignore + list [catch {set a(14) 186} msg] $msg [array names a] +} {0 186 14} +test set-old-6.2 {errors in writing variables} { + catch {unset a} + set a xxx + list [catch {set a(14) 186} msg] $msg +} {1 {can't set "a(14)": variable isn't array}} +test set-old-6.3 {errors in writing variables} { + catch {unset a} + set a(100) yyy + list [catch {set a 2} msg] $msg +} {1 {can't set "a": variable is array}} +test set-old-6.4 {expanding variable size} { + catch {unset a} + list [set a short] [set a "longer name"] [set a "even longer name"] \ + [set a "a much much truly longer name"] +} {short {longer name} {even longer name} {a much much truly longer name}} + +# Unset command, Tcl_UnsetVar procedures + +test set-old-7.1 {unset command} { + catch {unset a}; catch {unset b}; catch {unset c}; catch {unset d} + set a 44 + set b 55 + set c 66 + set d 77 + unset a b c + list [catch {set a(0) 0}] [catch {set b(0) 0}] [catch {set c(0) 0}] \ + [catch {set d(0) 0}] +} {0 0 0 1} +test set-old-7.2 {unset command} { + list [catch {unset} msg] $msg +} {1 {wrong # args: should be "unset varName ?varName ...?"}} +test set-old-7.3 {unset command} { + catch {unset a} + list [catch {unset a} msg] $msg +} {1 {can't unset "a": no such variable}} +test set-old-7.4 {unset command} { + catch {unset a} + set a 44 + list [catch {unset a(14)} msg] $msg +} {1 {can't unset "a(14)": variable isn't array}} +test set-old-7.5 {unset command} { + catch {unset a} + set a(0) xx + list [catch {unset a(14)} msg] $msg +} {1 {can't unset "a(14)": no such element in array}} +test set-old-7.6 {unset command} { + catch {unset a}; catch {unset b}; catch {unset c} + set a foo + set c gorp + list [catch {unset a a a(14)} msg] $msg [info exists c] +} {1 {can't unset "a": no such variable} 1} +test set-old-7.7 {unsetting globals from within procedures} { + set y 0 + proc p1 {} { + global y + set z [p2] + return [list $z [catch {set y} msg] $msg] + } + proc p2 {} {global y; unset y; list [catch {set y} msg] $msg} + p1 +} {{1 {can't read "y": no such variable}} 1 {can't read "y": no such variable}} +test set-old-7.8 {unsetting globals from within procedures} { + set y 0 + proc p1 {} { + global y + p2 + return [list [catch {set y 44} msg] $msg] + } + proc p2 {} {global y; unset y} + concat [p1] [list [catch {set y} msg] $msg] +} {0 44 0 44} +test set-old-7.9 {unsetting globals from within procedures} { + set y 0 + proc p1 {} { + global y + unset y + return [list [catch {set y 55} msg] $msg] + } + concat [p1] [list [catch {set y} msg] $msg] +} {0 55 0 55} +test set-old-7.10 {unset command} { + catch {unset a} + set a(14) 22 + unset a(14) + list [catch {set a(14)} msg] $msg [catch {array names a} msg2] $msg2 +} {1 {can't read "a(14)": no such element in array} 0 {}} +test set-old-7.11 {unset command} { + catch {unset a} + set a(14) 22 + unset a + list [catch {set a(14)} msg] $msg [catch {array names a} msg2] $msg2 +} {1 {can't read "a(14)": no such variable} 0 {}} + +# Array command. + +test set-old-8.1 {array command} { + list [catch {array} msg] $msg +} {1 {wrong # args: should be "array option arrayName ?arg ...?"}} +test set-old-8.2 {array command} { + list [catch {array a} msg] $msg +} {1 {wrong # args: should be "array option arrayName ?arg ...?"}} +test set-old-8.3 {array command} { + catch {unset a} + list [catch {array anymore a b} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.4 {array command} { + catch {unset a} + set a 44 + list [catch {array anymore a b} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.5 {array command} { + proc foo {} { + set a 44 + upvar 0 a x + list [catch {array anymore x b} msg] $msg + } + foo +} {1 {"x" isn't an array}} +test set-old-8.6 {array command} { + catch {unset a} + set a(22) 3 + list [catch {array gorp a} msg] $msg +} {1 {bad option "gorp": must be anymore, donesearch, exists, get, names, nextelement, set, size, or startsearch}} +test set-old-8.7 {array command, anymore option} { + catch {unset a} + list [catch {array anymore a x} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.8 {array command, anymore option, array doesn't exist yet but has compiler-allocated procedure slot} { + proc foo {x} { + if {$x==1} { + return [array anymore a x] + } + set a(x) 123 + } + list [catch {foo 1} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.9 {array command, donesearch option} { + catch {unset a} + list [catch {array donesearch a x} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.10 {array command, donesearch option, array doesn't exist yet but has compiler-allocated procedure slot} { + proc foo {x} { + if {$x==1} { + return [array donesearch a x] + } + set a(x) 123 + } + list [catch {foo 1} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.11 {array command, exists option} { + list [catch {array exists a b} msg] $msg +} {1 {wrong # args: should be "array exists arrayName"}} +test set-old-8.12 {array command, exists option} { + catch {unset a} + array exists a +} {0} +test set-old-8.13 {array command, exists option} { + catch {unset a} + set a(0) 1 + array exists a +} {1} +test set-old-8.14 {array command, exists option, array doesn't exist yet but has compiler-allocated procedure slot} { + proc foo {x} { + if {$x==1} { + return [array exists a] + } + set a(x) 123 + } + list [catch {foo 1} msg] $msg +} {0 0} +test set-old-8.15 {array command, get option} { + list [catch {array get} msg] $msg +} {1 {wrong # args: should be "array option arrayName ?arg ...?"}} +test set-old-8.16 {array command, get option} { + list [catch {array get a b c} msg] $msg +} {1 {wrong # args: should be "array get arrayName ?pattern?"}} +test set-old-8.17 {array command, get option} { + catch {unset a} + array get a +} {} +test set-old-8.18 {array command, get option} { + catch {unset a} + set a(22) 3 + set {a(long name)} {} + array get a +} {22 3 {long name} {}} +test set-old-8.19 {array command, get option (unset variable)} { + catch {unset a} + set a(x) 3 + trace var a(y) w ignore + array get a +} {x 3} +test set-old-8.20 {array command, get option, with pattern} { + catch {unset a} + set a(x1) 3 + set a(x2) 4 + set a(x3) 5 + set a(b1) 24 + set a(b2) 25 + array get a x* +} {x1 3 x2 4 x3 5} +test set-old-8.21 {array command, get option, array doesn't exist yet but has compiler-allocated procedure slot} { + proc foo {x} { + if {$x==1} { + return [array get a] + } + set a(x) 123 + } + list [catch {foo 1} msg] $msg +} {0 {}} +test set-old-8.22 {array command, names option} { + catch {unset a} + set a(22) 3 + list [catch {array names a 4 5} msg] $msg +} {1 {wrong # args: should be "array names arrayName ?pattern?"}} +test set-old-8.19 {array command, names option} { + catch {unset a} + array names a +} {} +test set-old-8.23 {array command, names option} { + catch {unset a} + set a(22) 3; set a(Textual_name) 44; set "a(name with spaces)" xxx + list [catch {lsort [array names a]} msg] $msg +} {0 {22 Textual_name {name with spaces}}} +test set-old-8.24 {array command, names option} { + catch {unset a} + set a(22) 3; set a(33) 44; + trace var a(xxx) w ignore + list [catch {lsort [array names a]} msg] $msg +} {0 {22 33}} +test set-old-8.25 {array command, names option} { + catch {unset a} + set a(22) 3; set a(33) 44; + trace var a(xxx) w ignore + set a(xxx) value + list [catch {lsort [array names a]} msg] $msg +} {0 {22 33 xxx}} +test set-old-8.26 {array command, names option} { + catch {unset a} + set a(axy) 3 + set a(bxy) 44 + set a(no) yes + set a(xxx) value + list [lsort [array names a *xy]] [lsort [array names a]] +} {{axy bxy} {axy bxy no xxx}} +test set-old-8.27 {array command, names option, array doesn't exist yet but has compiler-allocated procedure slot} { + proc foo {x} { + if {$x==1} { + return [array names a] + } + set a(x) 123 + } + list [catch {foo 1} msg] $msg +} {0 {}} +test set-old-8.28 {array command, nextelement option} { + list [catch {array nextelement a} msg] $msg +} {1 {wrong # args: should be "array nextelement arrayName searchId"}} +test set-old-8.29 {array command, nextelement option} { + catch {unset a} + list [catch {array nextelement a b} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.30 {array command, nextelement option, array doesn't exist yet but has compiler-allocated procedure slot} { + proc foo {x} { + if {$x==1} { + return [array nextelement a b] + } + set a(x) 123 + } + list [catch {foo 1} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.31 {array command, set option} { + list [catch {array set a} msg] $msg +} {1 {wrong # args: should be "array set arrayName list"}} +test set-old-8.32 {array command, set option} { + list [catch {array set a 1 2} msg] $msg +} {1 {wrong # args: should be "array set arrayName list"}} +test set-old-8.33 {array command, set option} { + list [catch {array set a "a \{ c"} msg] $msg +} {1 {unmatched open brace in list}} +test set-old-8.34 {array command, set option} { + catch {unset a} + set a 44 + list [catch {array set a {a b c d}} msg] $msg +} {1 {can't set "a(a)": variable isn't array}} +test set-old-8.35 {array command, set option} { + catch {unset a} + set a(xx) yy + array set a {b c d e} + array get a +} {d e xx yy b c} +test set-old-8.36 {array command, set option, array doesn't exist yet but has compiler-allocated procedure slot} { + proc foo {x} { + if {$x==1} { + return [array set a {x 0}] + } + set a(x) + } + list [catch {foo 1} msg] $msg +} {0 {}} +test set-old-8.37 {array command, set option} { + catch {unset aVaRnAmE} + array set aVaRnAmE {} + list [info exists aVaRnAmE] [catch {set aVaRnAmE} msg] $msg +} {1 1 {can't read "aVaRnAmE": variable is array}} +test set-old-8.38 {array command, size option} { + catch {unset a} + array size a +} {0} +test set-old-8.39 {array command, size option} { + list [catch {array size a 4} msg] $msg +} {1 {wrong # args: should be "array size arrayName"}} +test set-old-8.40 {array command, size option} { + catch {unset a} + array size a +} {0} +test set-old-8.41 {array command, size option} { + catch {unset a} + set a(22) 3; set a(Textual_name) 44; set "a(name with spaces)" xxx + list [catch {array size a} msg] $msg +} {0 3} +test set-old-8.42 {array command, size option} { + catch {unset a} + set a(22) 3; set a(xx) 44; set a(y) xxx + unset a(22) a(y) a(xx) + list [catch {array size a} msg] $msg +} {0 0} +test set-old-8.43 {array command, size option} { + catch {unset a} + set a(22) 3; + trace var a(33) rwu ignore + list [catch {array size a} msg] $msg +} {0 1} +test set-old-8.44 {array command, size option, array doesn't exist yet but has compiler-allocated procedure slot} { + proc foo {x} { + if {$x==1} { + return [array size a] + } + set a(x) 123 + } + list [catch {foo 1} msg] $msg +} {0 0} +test set-old-8.45 {array command, startsearch option} { + list [catch {array startsearch a b} msg] $msg +} {1 {wrong # args: should be "array startsearch arrayName"}} +test set-old-8.46 {array command, startsearch option} { + catch {unset a} + list [catch {array startsearch a} msg] $msg +} {1 {"a" isn't an array}} +test set-old-8.47 {array command, startsearch option, array doesn't exist yet but has compiler-allocated procedure slot} { + catch {rename p ""} + proc p {x} { + if {$x==1} { + return [array startsearch a] + } + set a(x) 123 + } + list [catch {p 1} msg] $msg +} {1 {"a" isn't an array}} + +test set-old-9.1 {ids for array enumeration} { + catch {unset a} + set a(a) 1 + list [array st a] [array st a] [array done a s-1-a; array st a] \ + [array done a s-2-a; array d a s-3-a; array start a] +} {s-1-a s-2-a s-3-a s-1-a} +test set-old-9.2 {array enumeration} { + catch {unset a} + set a(a) 1 + set a(b) 1 + set a(c) 1 + set x [array startsearch a] + list [array nextelement a $x] [array ne a $x] [array next a $x] \ + [array next a $x] [array next a $x] +} {a b c {} {}} +test set-old-9.3 {array enumeration} { + catch {unset a} + set a(a) 1 + set a(b) 1 + set a(c) 1 + set x [array startsearch a] + set y [array startsearch a] + set z [array startsearch a] + list [array nextelement a $x] [array ne a $x] \ + [array next a $y] [array next a $z] [array next a $y] \ + [array next a $z] [array next a $y] [array next a $z] \ + [array next a $y] [array next a $z] [array next a $x] \ + [array next a $x] +} {a b a a b b c c {} {} c {}} +test set-old-9.4 {array enumeration: stopping searches} { + catch {unset a} + set a(a) 1 + set a(b) 1 + set a(c) 1 + set x [array startsearch a] + set y [array startsearch a] + set z [array startsearch a] + list [array next a $x] [array next a $x] [array next a $y] \ + [array done a $z; array next a $x] \ + [array done a $x; array next a $y] [array next a $y] +} {a b a c b c} +test set-old-9.5 {array enumeration: stopping searches} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + array done a $x + list [catch {array next a $x} msg] $msg +} {1 {couldn't find search "s-1-a"}} +test set-old-9.6 {array enumeration: searches automatically stopped} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + set y [array startsearch a] + set a(b) 1 + list [catch {array next a $x} msg] $msg \ + [catch {array next a $y} msg2] $msg2 +} {1 {couldn't find search "s-1-a"} 1 {couldn't find search "s-2-a"}} +test set-old-9.7 {array enumeration: searches automatically stopped} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + set y [array startsearch a] + set a(a) 2 + list [catch {array next a $x} msg] $msg \ + [catch {array next a $y} msg2] $msg2 +} {0 a 0 a} +test set-old-9.8 {array enumeration: searches automatically stopped} { + catch {unset a} + set a(a) 1 + set a(c) 2 + set x [array startsearch a] + set y [array startsearch a] + catch {unset a(c)} + list [catch {array next a $x} msg] $msg \ + [catch {array next a $y} msg2] $msg2 +} {1 {couldn't find search "s-1-a"} 1 {couldn't find search "s-2-a"}} +test set-old-9.9 {array enumeration: searches automatically stopped} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + set y [array startsearch a] + catch {unset a(c)} + list [catch {array next a $x} msg] $msg \ + [catch {array next a $y} msg2] $msg2 +} {0 a 0 a} +test set-old-9.10 {array enumeration: searches automatically stopped} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + set y [array startsearch a] + trace var a(b) r {} + list [catch {array next a $x} msg] $msg \ + [catch {array next a $y} msg2] $msg2 +} {1 {couldn't find search "s-1-a"} 1 {couldn't find search "s-2-a"}} +test set-old-9.11 {array enumeration: searches automatically stopped} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + set y [array startsearch a] + trace var a(a) r {} + list [catch {array next a $x} msg] $msg \ + [catch {array next a $y} msg2] $msg2 +} {0 a 0 a} +test set-old-9.12 {array enumeration with traced undefined elements} { + catch {unset a} + set a(a) 1 + trace var a(b) r {} + set x [array startsearch a] + list [array next a $x] [array next a $x] +} {a {}} + +test set-old-10.1 {array enumeration errors} { + list [catch {array start} msg] $msg +} {1 {wrong # args: should be "array option arrayName ?arg ...?"}} +test set-old-10.2 {array enumeration errors} { + list [catch {array start a b} msg] $msg +} {1 {wrong # args: should be "array startsearch arrayName"}} +test set-old-10.3 {array enumeration errors} { + catch {unset a} + list [catch {array start a} msg] $msg +} {1 {"a" isn't an array}} +test set-old-10.4 {array enumeration errors} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + list [catch {array next a} msg] $msg +} {1 {wrong # args: should be "array nextelement arrayName searchId"}} +test set-old-10.5 {array enumeration errors} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + list [catch {array next a b c} msg] $msg +} {1 {wrong # args: should be "array nextelement arrayName searchId"}} +test set-old-10.6 {array enumeration errors} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + list [catch {array next a a-1-a} msg] $msg +} {1 {illegal search identifier "a-1-a"}} +test set-old-10.7 {array enumeration errors} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + list [catch {array next a sx1-a} msg] $msg +} {1 {illegal search identifier "sx1-a"}} +test set-old-10.8 {array enumeration errors} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + list [catch {array next a s--a} msg] $msg +} {1 {illegal search identifier "s--a"}} +test set-old-10.9 {array enumeration errors} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + list [catch {array next a s-1-b} msg] $msg +} {1 {search identifier "s-1-b" isn't for variable "a"}} +test set-old-10.10 {array enumeration errors} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + list [catch {array next a s-1ba} msg] $msg +} {1 {illegal search identifier "s-1ba"}} +test set-old-10.11 {array enumeration errors} { + catch {unset a} + set a(a) 1 + set x [array startsearch a] + list [catch {array next a s-2-a} msg] $msg +} {1 {couldn't find search "s-2-a"}} +test set-old-10.12 {array enumeration errors} { + list [catch {array done a} msg] $msg +} {1 {wrong # args: should be "array donesearch arrayName searchId"}} +test set-old-10.13 {array enumeration errors} { + list [catch {array done a b c} msg] $msg +} {1 {wrong # args: should be "array donesearch arrayName searchId"}} +test set-old-10.14 {array enumeration errors} { + list [catch {array done a b} msg] $msg +} {1 {illegal search identifier "b"}} +test set-old-10.15 {array enumeration errors} { + list [catch {array anymore a} msg] $msg +} {1 {wrong # args: should be "array anymore arrayName searchId"}} +test set-old-10.16 {array enumeration errors} { + list [catch {array any a b c} msg] $msg +} {1 {wrong # args: should be "array anymore arrayName searchId"}} +test set-old-10.17 {array enumeration errors} { + catch {unset a} + set a(0) 44 + list [catch {array any a bogus} msg] $msg +} {1 {illegal search identifier "bogus"}} + +# Array enumeration with "anymore" option + +test set-old-11.1 {array anymore option} { + catch {unset a} + set a(a) 1 + set a(b) 2 + set a(c) 3 + array startsearch a + list [array anymore a s-1-a] [array next a s-1-a] \ + [array anymore a s-1-a] [array next a s-1-a] \ + [array anymore a s-1-a] [array next a s-1-a] \ + [array anymore a s-1-a] [array next a s-1-a] +} {1 a 1 b 1 c 0 {}} +test set-old-11.2 {array anymore option} { + catch {unset a} + set a(a) 1 + set a(b) 2 + set a(c) 3 + array startsearch a + list [array next a s-1-a] [array next a s-1-a] \ + [array anymore a s-1-a] [array next a s-1-a] \ + [array next a s-1-a] [array anymore a s-1-a] +} {a b 1 c {} 0} + +# Special check to see that the value of a variable is handled correctly +# if it is returned as the result of a procedure (must not free the variable +# string while deleting the call frame). Errors will only be detected if +# a memory consistency checker such as Purify is being used. + +test set-old-12.1 {cleanup on procedure return} { + proc foo {} { + set x 12345 + } + foo +} 12345 +test set-old-12.2 {cleanup on procedure return} { + proc foo {} { + set x(1) 23456 + } + foo +} 23456 + +# Must delete variables when done, since these arrays get used as +# scalars by other tests. + +catch {unset a} +catch {unset b} +catch {unset c} +catch {unset aVaRnAmE} +return "" diff --git a/tests/set.test b/tests/set.test new file mode 100644 index 0000000..4d0f352 --- /dev/null +++ b/tests/set.test @@ -0,0 +1,233 @@ +# Commands covered: set +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) set.test 1.6 97/06/23 18:18:54 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {unset x} +catch {unset i} + +test set-1.1 {TclCompileSetCmd: missing variable name} { + list [catch {set} msg] $msg +} {1 {wrong # args: should be "set varName ?newValue?"}} +test set-1.2 {TclCompileSetCmd: simple variable name} { + set i 10 + list [set i] $i +} {10 10} +test set-1.3 {TclCompileSetCmd: error compiling variable name} { + set i 10 + catch {set "i"xxx} msg + set msg +} {quoted string doesn't terminate properly} +test set-1.4 {TclCompileSetCmd: simple variable name in quotes} { + set i 17 + list [set "i"] $i +} {17 17} +test set-1.5 {TclCompileSetCmd: simple variable name in braces} { + catch {unset {a simple var}} + set {a simple var} 27 + list [set {a simple var}] ${a simple var} +} {27 27} +test set-1.6 {TclCompileSetCmd: simple array variable name} { + catch {unset a} + set a(foo) 37 + list [set a(foo)] $a(foo) +} {37 37} +test set-1.7 {TclCompileSetCmd: non-simple (computed) variable name} { + set x "i" + set i 77 + list [set $x] $i +} {77 77} +test set-1.8 {TclCompileSetCmd: non-simple (computed) variable name} { + set x "i" + set i 77 + list [set [set x] 2] $i +} {2 2} + +test set-1.9 {TclCompileSetCmd: 3rd arg => assignment} { + set i "abcdef" + list [set i] $i +} {abcdef abcdef} +test set-1.10 {TclCompileSetCmd: only two args => just getting value} { + set i {one two} + set i +} {one two} + +test set-1.11 {TclCompileSetCmd: simple global name} { + proc p {} { + global i + set i 54 + set i + } + p +} {54} +test set-1.12 {TclCompileSetCmd: simple local name} { + proc p {bar} { + set foo $bar + set foo + } + p 999 +} {999} +test set-1.13 {TclCompileSetCmd: simple but new (unknown) local name} { + proc p {} { + set bar + } + catch {p} msg + set msg +} {can't read "bar": no such variable} +test set-1.14 {TclCompileSetCmd: simple local name, >255 locals} { + proc 260locals {} { + # create 260 locals (the last ones with index > 255) + set a0 0; set a1 0; set a2 0; set a3 0; set a4 0 + set a5 0; set a6 0; set a7 0; set a8 0; set a9 0 + set b0 0; set b1 0; set b2 0; set b3 0; set b4 0 + set b5 0; set b6 0; set b7 0; set b8 0; set b9 0 + set c0 0; set c1 0; set c2 0; set c3 0; set c4 0 + set c5 0; set c6 0; set c7 0; set c8 0; set c9 0 + set d0 0; set d1 0; set d2 0; set d3 0; set d4 0 + set d5 0; set d6 0; set d7 0; set d8 0; set d9 0 + set e0 0; set e1 0; set e2 0; set e3 0; set e4 0 + set e5 0; set e6 0; set e7 0; set e8 0; set e9 0 + set f0 0; set f1 0; set f2 0; set f3 0; set f4 0 + set f5 0; set f6 0; set f7 0; set f8 0; set f9 0 + set g0 0; set g1 0; set g2 0; set g3 0; set g4 0 + set g5 0; set g6 0; set g7 0; set g8 0; set g9 0 + set h0 0; set h1 0; set h2 0; set h3 0; set h4 0 + set h5 0; set h6 0; set h7 0; set h8 0; set h9 0 + set i0 0; set i1 0; set i2 0; set i3 0; set i4 0 + set i5 0; set i6 0; set i7 0; set i8 0; set i9 0 + set j0 0; set j1 0; set j2 0; set j3 0; set j4 0 + set j5 0; set j6 0; set j7 0; set j8 0; set j9 0 + set k0 0; set k1 0; set k2 0; set k3 0; set k4 0 + set k5 0; set k6 0; set k7 0; set k8 0; set k9 0 + set l0 0; set l1 0; set l2 0; set l3 0; set l4 0 + set l5 0; set l6 0; set l7 0; set l8 0; set l9 0 + set m0 0; set m1 0; set m2 0; set m3 0; set m4 0 + set m5 0; set m6 0; set m7 0; set m8 0; set m9 0 + set n0 0; set n1 0; set n2 0; set n3 0; set n4 0 + set n5 0; set n6 0; set n7 0; set n8 0; set n9 0 + set o0 0; set o1 0; set o2 0; set o3 0; set o4 0 + set o5 0; set o6 0; set o7 0; set o8 0; set o9 0 + set p0 0; set p1 0; set p2 0; set p3 0; set p4 0 + set p5 0; set p6 0; set p7 0; set p8 0; set p9 0 + set q0 0; set q1 0; set q2 0; set q3 0; set q4 0 + set q5 0; set q6 0; set q7 0; set q8 0; set q9 0 + set r0 0; set r1 0; set r2 0; set r3 0; set r4 0 + set r5 0; set r6 0; set r7 0; set r8 0; set r9 0 + set s0 0; set s1 0; set s2 0; set s3 0; set s4 0 + set s5 0; set s6 0; set s7 0; set s8 0; set s9 0 + set t0 0; set t1 0; set t2 0; set t3 0; set t4 0 + set t5 0; set t6 0; set t7 0; set t8 0; set t9 0 + set u0 0; set u1 0; set u2 0; set u3 0; set u4 0 + set u5 0; set u6 0; set u7 0; set u8 0; set u9 0 + set v0 0; set v1 0; set v2 0; set v3 0; set v4 0 + set v5 0; set v6 0; set v7 0; set v8 0; set v9 0 + set w0 0; set w1 0; set w2 0; set w3 0; set w4 0 + set w5 0; set w6 0; set w7 0; set w8 0; set w9 0 + set x0 0; set x1 0; set x2 0; set x3 0; set x4 0 + set x5 0; set x6 0; set x7 0; set x8 0; set x9 0 + set y0 0; set y1 0; set y2 0; set y3 0; set y4 0 + set y5 0; set y6 0; set y7 0; set y8 0; set y9 0 + set z0 0; set z1 0; set z2 0; set z3 0; set z4 0 + set z5 0; set z6 0; set z7 0; set z8 0; set z9 1234 + } + 260locals +} {1234} +test set-1.15 {TclCompileSetCmd: variable is array} { + catch {unset a} + set x 27 + set x [set a(foo) 11] + catch {unset a} + set x +} 11 +test set-1.16 {TclCompileSetCmd: variable is array, elem substitutions} { + catch {unset a} + set i 5 + set x 789 + set a(foo5) 27 + set x [set a(foo$i)] + catch {unset a} + set x +} 27 + +test set-1.17 {TclCompileSetCmd: doing assignment, simple int} { + set i 5 + set i 123 +} 123 +test set-1.18 {TclCompileSetCmd: doing assignment, simple int} { + set i 5 + set i -100 +} -100 +test set-1.19 {TclCompileSetCmd: doing assignment, simple but not int} { + set i 5 + set i 0x12MNOP + set i +} {0x12MNOP} +test set-1.20 {TclCompileSetCmd: doing assignment, in quotes} { + set i 25 + set i "-100" +} -100 +test set-1.21 {TclCompileSetCmd: doing assignment, in braces} { + set i 24 + set i {126} +} 126 +test set-1.22 {TclCompileSetCmd: doing assignment, large int} { + set i 5 + set i 200000 +} 200000 +test set-1.23 {TclCompileSetCmd: doing assignment, formatted int != int} { + set i 25 + set i 000012345 ;# an octal literal == 5349 decimal + list $i [incr i] +} {000012345 5350} + +test set-1.24 {TclCompileSetCmd: too many arguments} { + set i 10 + catch {set i 20 30} msg + set msg +} {wrong # args: should be "set varName ?newValue?"} + +test set-2.1 {set command: runtime error, bad variable name} { + list [catch {set {"foo}} msg] $msg $errorInfo +} {1 {can't read ""foo": no such variable} {can't read ""foo": no such variable + while executing +"set {"foo}"}} +test set-2.2 {set command: runtime error, not array variable} { + catch {unset b} + set b 44 + list [catch {set b(123)} msg] $msg +} {1 {can't read "b(123)": variable isn't array}} +test set-2.3 {set command: runtime error, errors in reading variables} { + catch {unset a} + set a(6) 44 + list [catch {set a(18)} msg] $msg +} {1 {can't read "a(18)": no such element in array}} +test set-2.4 {set command: runtime error, readonly variable} { + proc readonly args {error "variable is read-only"} + set x 123 + trace var x w readonly + list [catch {set x 1} msg] $msg $errorInfo +} {1 {can't set "x": variable is read-only} {can't set "x": variable is read-only + while executing +"set x 1"}} +test set-2.5 {set command: runtime error, basic array operations} { + list [catch {set a(other)} msg] $msg +} {1 {can't read "a(other)": no such element in array}} +test set-2.6 {set command: runtime error, basic array operations} { + list [catch {set a} msg] $msg +} {1 {can't read "a": variable is array}} + +catch {unset a} +catch {unset b} +catch {unset i} +catch {unset x} +return "" diff --git a/tests/socket.test b/tests/socket.test new file mode 100644 index 0000000..b2719de --- /dev/null +++ b/tests/socket.test @@ -0,0 +1,1344 @@ +# Commands tested in this file: socket. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# Running socket tests with a remote server: +# ------------------------------------------ +# +# Some tests in socket.test depend on the existence of a remote server to +# which they connect. The remote server must be an instance of tcltest and it +# must run the script found in the file "remote.tcl" in this directory. You +# can start the remote server on any machine reachable from the machine on +# which you want to run the socket tests, by issuing: +# +# tcltest remote.tcl -port 2048 # Or choose another port number. +# +# If the machine you are running the remote server on has several IP +# interfaces, you can choose which interface the server listens on for +# connections by specifying the -address command line flag, so: +# +# tcltest remote.tcl -address your.machine.com +# +# These options can also be set by environment variables. On Unix, you can +# type these commands to the shell from which the remote server is started: +# +# shell% setenv serverPort 2048 +# shell% setenv serverAddress your.machine.com +# +# and subsequently you can start the remote server with: +# +# tcltest remote.tcl +# +# to have it listen on port 2048 on the interface your.machine.com. +# +# When the server starts, it prints out a detailed message containing its +# configuration information, and it will block until killed with a Ctrl-C. +# Once the remote server exists, you can run the tests in socket.test with +# the server by setting two Tcl variables: +# +# % set remoteServerIP <name or address of machine on which server runs> +# % set remoteServerPort 2048 +# +# These variables are also settable from the environment. On Unix, you can: +# +# shell% setenv remoteServerIP machine.where.server.runs +# shell% senetv remoteServerPort 2048 +# +# The preamble of the socket.test file checks to see if the variables are set +# either in Tcl or in the environment; if they are, it attempts to connect to +# the server. If the connection is successful, the tests using the remote +# server will be performed; otherwise, it will attempt to start the remote +# server (via exec) on platforms that support this, on the local host, +# listening at port 2048. If all fails, a message is printed and the tests +# using the remote server are not performed. +# +# SCCS: @(#) socket.test 1.83 97/09/15 16:29:47 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {$testConfig(socket) == 0} { + return +} + +# +# If remoteServerIP or remoteServerPort are not set, check in the +# environment variables for externally set values. +# + +if {![info exists remoteServerIP]} { + if {[info exists env(remoteServerIP)]} { + set remoteServerIP $env(remoteServerIP) + } +} +if {![info exists remoteServerPort]} { + if {[info exists env(remoteServerIP)]} { + set remoteServerPort $env(remoteServerPort) + } else { + if {[info exists remoteServerIP]} { + set remoteServerPort 2048 + } + } +} + +# +# Check if we're supposed to do tests against the remote server +# + +set doTestsWithRemoteServer 1 +if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} { + set remoteServerIP localhost +} +if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} { + set remoteServerPort 2048 +} + +# Attempt to connect to a remote server if one is already running. If it +# is not running or for some other reason the connect fails, attempt to +# start the remote server on the local host listening on port 2048. This +# is only done on platforms that support exec (i.e. not on the Mac). On +# platforms that do not support exec, the remote server must be started +# by the user before running the tests. + +set remoteProcChan "" +set commandSocket "" +if {$doTestsWithRemoteServer} { + catch {close $commandSocket} + if {[catch {set commandSocket [socket $remoteServerIP \ + $remoteServerPort]}] != 0} { + if {[info commands exec] == ""} { + set noRemoteTestReason "can't exec" + set doTestsWithRemoteServer 0 + } elseif {$testConfig(win32s)} { + set noRemoteTestReason "\ncan't run multiple instances of tcltest under win32s." + set doTestsWithRemoteServer 0 + } else { + set remoteServerIP localhost + if {[catch {set remoteProcChan \ + [open "|[list $tcltest remote.tcl \ + -serverIsSilent \ + -port $remoteServerPort \ + -address $remoteServerIP]" \ + w+]} \ + msg] == 0} { + after 1000 + if {[catch {set commandSocket [socket $remoteServerIP \ + $remoteServerPort]} msg] == 0} { + fconfigure $commandSocket -translation crlf -buffering line + } else { + set noRemoteTestReason $msg + set doTestsWithRemoteServer 0 + } + } else { + set noRemoteTestReason "$msg $tcltest" + set doTestsWithRemoteServer 0 + } + } + } else { + fconfigure $commandSocket -translation crlf -buffering line + } +} + +if {$doTestsWithRemoteServer == 0} { + puts "Skipping tests with remote server. See tests/socket.test for" + puts "information on how to run remote server." + if {[info exists VERBOSE] && ($VERBOSE != 0)} { + puts "Reason for not doing remote tests: $noRemoteTestReason" + } +} + +# +# If we do the tests, define a command to send a command to the +# remote server. +# + +if {$doTestsWithRemoteServer == 1} { + proc sendCommand {c} { + global commandSocket + + if {[eof $commandSocket]} { + error "remote server disappeared" + } + + if {[catch {puts $commandSocket $c} msg]} { + error "remote server disappaered: $msg" + } + if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} { + error "remote server disappeared: $msg" + } + + set resp "" + while {1} { + set line [gets $commandSocket] + if {[eof $commandSocket]} { + error "remote server disappaered" + } + if {[string compare $line "--Marker--Marker--Marker--"] == 0} { + if {[string compare [lindex $resp 0] error] == 0} { + error [lindex $resp 1] + } else { + return [lindex $resp 1] + } + } else { + append resp $line "\n" + } + } + } +} + +test socket-1.1 {arg parsing for socket command} { + list [catch {socket -server} msg] $msg +} {1 {no argument given for -server option}} +test socket-1.2 {arg parsing for socket command} { + list [catch {socket -server foo} msg] $msg +} {1 {wrong # args: should be either: +socket ?-myaddr addr? ?-myport myport? ?-async? host port +socket -server command ?-myaddr addr? port}} +test socket-1.3 {arg parsing for socket command} { + list [catch {socket -myaddr} msg] $msg +} {1 {no argument given for -myaddr option}} +test socket-1.4 {arg parsing for socket command} { + list [catch {socket -myaddr 127.0.0.1} msg] $msg +} {1 {wrong # args: should be either: +socket ?-myaddr addr? ?-myport myport? ?-async? host port +socket -server command ?-myaddr addr? port}} +test socket-1.5 {arg parsing for socket command} { + list [catch {socket -myport} msg] $msg +} {1 {no argument given for -myport option}} +test socket-1.6 {arg parsing for socket command} { + list [catch {socket -myport xxxx} msg] $msg +} {1 {expected integer but got "xxxx"}} +test socket-1.7 {arg parsing for socket command} { + list [catch {socket -myport 2522} msg] $msg +} {1 {wrong # args: should be either: +socket ?-myaddr addr? ?-myport myport? ?-async? host port +socket -server command ?-myaddr addr? port}} +test socket-1.8 {arg parsing for socket command} { + list [catch {socket -froboz} msg] $msg +} {1 {bad option "-froboz", must be -async, -myaddr, -myport, or -server}} +test socket-1.9 {arg parsing for socket command} { + list [catch {socket -server foo -myport 2521 3333} msg] $msg +} {1 {Option -myport is not valid for servers}} +test socket-1.10 {arg parsing for socket command} { + list [catch {socket host 2528 -junk} msg] $msg +} {1 {wrong # args: should be either: +socket ?-myaddr addr? ?-myport myport? ?-async? host port +socket -server command ?-myaddr addr? port}} +test socket-1.11 {arg parsing for socket command} { + list [catch {socket -server callback 2520 --} msg] $msg +} {1 {wrong # args: should be either: +socket ?-myaddr addr? ?-myport myport? ?-async? host port +socket -server command ?-myaddr addr? port}} +test socket-1.12 {arg parsing for socket command} { + list [catch {socket foo badport} msg] $msg +} {1 {expected integer but got "badport"}} + +test socket-2.1 {tcp connection} {stdio} { + removeFile script + set f [open script w] + puts $f { + set timer [after 2000 "set x timed_out"] + set f [socket -server accept 2828] + proc accept {file addr port} { + global x + set x done + close $file + } + puts ready + vwait x + after cancel $timer + close $f + puts $x + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f x + if {[catch {socket localhost 2828} msg]} { + set x $msg + } else { + lappend x [gets $f] + close $msg + } + lappend x [gets $f] + close $f + set x +} {ready done {}} + +if [info exists port] { + incr port +} else { + set port [expr 2048 + [pid]%1024] +} +test socket-2.2 {tcp connection with client port specified} {stdio} { + removeFile script + set f [open script w] + puts $f { + set timer [after 2000 "set x done"] + set f [socket -server accept 2828] + proc accept {file addr port} { + global x + puts "[gets $file] $port" + close $file + set x done + } + puts ready + vwait x + after cancel $timer + close $f + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f x + global port + if {[catch {socket -myport $port localhost 2828} sock]} { + set x $sock + close [socket localhost 2828] + puts stderr $sock + } else { + puts $sock hello + flush $sock + lappend x [gets $f] + close $sock + } + close $f + set x +} [list ready "hello $port"] +test socket-2.3 {tcp connection with client interface specified} {stdio} { + removeFile script + set f [open script w] + puts $f { + set timer [after 2000 "set x done"] + set f [socket -server accept 2828] + proc accept {file addr port} { + global x + puts "[gets $file] $addr" + close $file + set x done + } + puts ready + vwait x + after cancel $timer + close $f + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f x + if {[catch {socket -myaddr localhost localhost 2828} sock]} { + set x $sock + } else { + puts $sock hello + flush $sock + lappend x [gets $f] + close $sock + } + close $f + set x +} {ready {hello 127.0.0.1}} +test socket-2.4 {tcp connection with server interface specified} {stdio} { + removeFile script + set f [open script w] + puts $f { + set timer [after 2000 "set x done"] + set f [socket -server accept -myaddr [info hostname] 2828] + proc accept {file addr port} { + global x + puts "[gets $file]" + close $file + set x done + } + puts ready + vwait x + after cancel $timer + close $f + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f x + if {[catch {socket [info hostname] 2828} sock]} { + set x $sock + } else { + puts $sock hello + flush $sock + lappend x [gets $f] + close $sock + } + close $f + set x +} {ready hello} +test socket-2.5 {tcp connection with redundant server port} {stdio} { + removeFile script + set f [open script w] + puts $f { + set timer [after 2000 "set x done"] + set f [socket -server accept 2828] + proc accept {file addr port} { + global x + puts "[gets $file]" + close $file + set x done + } + puts ready + vwait x + after cancel $timer + close $f + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f x + if {[catch {socket localhost 2828} sock]} { + set x $sock + } else { + puts $sock hello + flush $sock + lappend x [gets $f] + close $sock + } + close $f + set x +} {ready hello} +test socket-2.6 {tcp connection} {} { + set status ok + if {![catch {set sock [socket localhost 2828]}]} { + if {![catch {gets $sock}]} { + set status broken + } + close $sock + } + set status +} ok +test socket-2.7 {echo server, one line} {stdio} { + removeFile script + set f [open script w] + puts $f { + set timer [after 2000 "set x done"] + set f [socket -server accept 2828] + proc accept {s a p} { + fileevent $s readable [list echo $s] + fconfigure $s -translation lf -buffering line + } + proc echo {s} { + set l [gets $s] + if {[eof $s]} { + global x + close $s + set x done + } else { + puts $s $l + } + } + puts ready + vwait x + after cancel $timer + close $f + puts done + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f + set s [socket localhost 2828] + fconfigure $s -buffering line -translation lf + puts $s "hello abcdefghijklmnop" + set x [gets $s] + close $s + set y [gets $f] + close $f + list $x $y +} {{hello abcdefghijklmnop} done} +test socket-2.8 {echo server, loop 50 times, single connection} {stdio} { + removeFile script + set f [open script w] + puts $f { + set f [socket -server accept 2828] + proc accept {s a p} { + fileevent $s readable [list echo $s] + fconfigure $s -buffering line + } + proc echo {s} { + global i + set l [gets $s] + if {[eof $s]} { + global x + close $s + set x done + } else { + incr i + puts $s $l + } + } + set i 0 + puts ready + set timer [after 20000 "set x done"] + vwait x + after cancel $timer + close $f + puts "done $i" + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f + set s [socket localhost 2828] + fconfigure $s -buffering line + for {set x 0} {$x < 50} {incr x} { + puts $s "hello abcdefghijklmnop" + gets $s + } + close $s + set x [gets $f] + close $f + set x +} {done 50} +test socket-2.9 {socket conflict} {stdio} { + set s [socket -server accept 2828] + removeFile script + set f [open script w] + puts $f {set f [socket -server accept 2828]} + close $f + set f [open "|[list $tcltest script]" r] + gets $f + after 100 + set x [list [catch {close $f} msg] $msg] + close $s + set x +} {1 {couldn't open socket: address already in use + while executing +"socket -server accept 2828" + (file "script" line 1)}} +test socket-2.10 {close on accept, accepted socket lives} { + set done 0 + set timer [after 20000 "set done timed_out"] + set ss [socket -server accept 2830] + proc accept {s a p} { + global ss + close $ss + fileevent $s readable "readit $s" + fconfigure $s -trans lf + } + proc readit {s} { + global done + gets $s + close $s + set done 1 + } + set cs [socket [info hostname] 2830] + puts $cs hello + close $cs + vwait done + after cancel $timer + set done +} 1 + +test socket-3.1 {socket conflict} {stdio} { + removeFile script + set f [open script w] + puts $f { + set f [socket -server accept 2828] + puts ready + gets stdin + close $f + } + close $f + set f [open "|[list $tcltest script]" r+] + gets $f + set x [list [catch {socket -server accept 2828} msg] \ + $msg] + puts $f bye + close $f + set x +} {1 {couldn't open socket: address already in use}} +test socket-3.2 {server with several clients} {stdio} { + removeFile script + set f [open script w] + puts $f { + set t1 [after 30000 "set x timed_out"] + set t2 [after 31000 "set x timed_out"] + set t3 [after 32000 "set x timed_out"] + set counter 0 + set s [socket -server accept 2828] + proc accept {s a p} { + fileevent $s readable [list echo $s] + fconfigure $s -buffering line + } + proc echo {s} { + global x + set l [gets $s] + if {[eof $s]} { + close $s + set x done + } else { + puts $s $l + } + } + puts ready + vwait x + after cancel $t1 + vwait x + after cancel $t2 + vwait x + after cancel $t3 + close $s + puts $x + } + close $f + set f [open "|[list $tcltest script]" r+] + set x [gets $f] + set s1 [socket localhost 2828] + fconfigure $s1 -buffering line + set s2 [socket localhost 2828] + fconfigure $s2 -buffering line + set s3 [socket localhost 2828] + fconfigure $s3 -buffering line + for {set i 0} {$i < 100} {incr i} { + puts $s1 hello,s1 + gets $s1 + puts $s2 hello,s2 + gets $s2 + puts $s3 hello,s3 + gets $s3 + } + close $s1 + close $s2 + close $s3 + lappend x [gets $f] + close $f + set x +} {ready done} + +test socket-4.1 {server with several clients} {stdio} { + removeFile script + set f [open script w] + puts $f { + gets stdin + set s [socket localhost 2828] + fconfigure $s -buffering line + for {set i 0} {$i < 100} {incr i} { + puts $s hello + gets $s + } + close $s + puts bye + gets stdin + } + close $f + set p1 [open "|[list $tcltest script]" r+] + fconfigure $p1 -buffering line + set p2 [open "|[list $tcltest script]" r+] + fconfigure $p2 -buffering line + set p3 [open "|[list $tcltest script]" r+] + fconfigure $p3 -buffering line + proc accept {s a p} { + fconfigure $s -buffering line + fileevent $s readable [list echo $s] + } + proc echo {s} { + global x + set l [gets $s] + if {[eof $s]} { + close $s + set x done + } else { + puts $s $l + } + } + set t1 [after 30000 "set x timed_out"] + set t2 [after 31000 "set x timed_out"] + set t3 [after 32000 "set x timed_out"] + set s [socket -server accept 2828] + puts $p1 open + puts $p2 open + puts $p3 open + vwait x + vwait x + vwait x + after cancel $t1 + after cancel $t2 + after cancel $t3 + close $s + set l "" + lappend l [list p1 [gets $p1] $x] + lappend l [list p2 [gets $p2] $x] + lappend l [list p3 [gets $p3] $x] + puts $p1 bye + puts $p2 bye + puts $p3 bye + close $p1 + close $p2 + close $p3 + set l +} {{p1 bye done} {p2 bye done} {p3 bye done}} +test socket-4.2 {byte order problems, socket numbers, htons} { + set x ok + if {[catch {socket -server dodo 0x3000} msg]} { + set x $msg + } else { + close $msg + } + set x +} ok + +test socket-5.1 {byte order problems, socket numbers, htons} {unixOnly} { + # + # THIS TEST WILL FAIL if you are running as superuser. + # + set x {couldn't open socket: not owner} + if {![catch {socket -server dodo 0x1} msg]} { + set x {htons problem, should be disallowed, are you running as SU?} + close $msg + } + set x +} {couldn't open socket: not owner} +test socket-5.2 {byte order problems, socket numbers, htons} { + set x {couldn't open socket: port number too high} + if {![catch {socket -server dodo 0x10000} msg]} { + set x {port resolution problem, should be disallowed} + close $msg + } + set x +} {couldn't open socket: port number too high} +test socket-5.3 {byte order problems, socket numbers, htons} {unixOnly} { + # + # THIS TEST WILL FAIL if you are running as superuser. + # + set x {couldn't open socket: not owner} + if {![catch {socket -server dodo 21} msg]} { + set x {htons problem, should be disallowed, are you running as SU?} + close $msg + } + set x +} {couldn't open socket: not owner} + +test socket-6.1 {accept callback error} {stdio} { + removeFile script + set f [open script w] + puts $f { + gets stdin + socket localhost 2848 + } + close $f + set f [open "|[list $tcltest script]" r+] + proc bgerror args { + global x + set x $args + } + proc accept {s a p} {expr 10 / 0} + set s [socket -server accept 2848] + puts $f hello + close $f + set timer [after 10000 "set x timed_out"] + vwait x + after cancel $timer + close $s + rename bgerror {} + set x +} {{divide by zero}} + +test socket-7.1 {testing socket specific options} {stdio} { + removeFile script + set f [open script w] + puts $f { + socket -server accept 2820 + proc accept args { + global x + set x done + } + puts ready + set timer [after 10000 "set x timed_out"] + vwait x + after cancel $timer + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f + set s [socket localhost 2820] + set p [fconfigure $s -peername] + close $s + close $f + set l "" + lappend l [string compare [lindex $p 0] 127.0.0.1] + lappend l [string compare [lindex $p 2] 2820] + lappend l [llength $p] +} {0 0 3} +test socket-7.2 {testing socket specific options} {stdio} { + removeFile script + set f [open script w] + puts $f { + socket -server accept 2821 + proc accept args { + global x + set x done + } + puts ready + set timer [after 10000 "set x timed_out"] + vwait x + after cancel $timer + } + close $f + set f [open "|[list $tcltest script]" r] + gets $f + set s [socket localhost 2821] + set p [fconfigure $s -sockname] + close $s + close $f + set l "" + lappend l [llength $p] + lappend l [lindex $p 0] + lappend l [expr [lindex $p 2] == 2821] +} {3 127.0.0.1 0} +test socket-7.3 {testing socket specific options} { + set s [socket -server accept 2822] + set l [fconfigure $s] + close $s + update + llength $l +} 10 +test socket-7.4 {testing socket specific options} { + set s [socket -server accept 2823] + proc accept {s a p} { + global x + set x [fconfigure $s -sockname] + close $s + } + set s1 [socket [info hostname] 2823] + set timer [after 10000 "set x timed_out"] + vwait x + after cancel $timer + close $s + close $s1 + set l "" + lappend l [lindex $x 2] [llength $x] +} {2823 3} +test socket-7.5 {testing socket specific options} {unixOrPc} { + set s [socket -server accept 2829] + proc accept {s a p} { + global x + set x [fconfigure $s -sockname] + close $s + } + set s1 [socket localhost 2829] + set timer [after 10000 "set x timed_out"] + vwait x + after cancel $timer + close $s + close $s1 + set l "" + lappend l [lindex $x 0] [lindex $x 2] [llength $x] +} {127.0.0.1 2829 3} + +test socket-8.1 {testing -async flag on sockets} { + # NOTE: This test may fail on some Solaris 2.4 systems. If it does, + # check that you have these patches installed (using showrev -p): + # + # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03, + # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01, + # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03, + # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01, + # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01, + # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03 + # + # If after installing these patches you are still experiencing a + # problem, please email jyl@eng.sun.com. We have not observed this + # failure on Solaris 2.5, so another option (instead of installing + # these patches) is to upgrade to Solaris 2.5. + set s [socket -server accept 2830] + proc accept {s a p} { + global x + puts $s bye + close $s + set x done + } + set s1 [socket -async [info hostname] 2830] + vwait x + set z [gets $s1] + close $s + close $s1 + set z +} bye + +test socket-9.1 {testing spurious events} { + set len 0 + set spurious 0 + set done 0 + proc readlittle {s} { + global spurious done len + set l [read $s 1] + if {[string length $l] == 0} { + if {![eof $s]} { + incr spurious + } else { + close $s + set done 1 + } + } else { + incr len [string length $l] + } + } + proc accept {s a p} { + fconfigure $s -buffering none -blocking off + fileevent $s readable [list readlittle $s] + } + set s [socket -server accept 2831] + set c [socket [info hostname] 2831] + puts -nonewline $c 01234567890123456789012345678901234567890123456789 + close $c + set timer [after 10000 "set done timed_out"] + vwait done + after cancel $timer + close $s + list $spurious $len +} {0 50} +test socket-9.2 {testing async write, fileevents, flush on close} {} { + set firstblock "" + for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"} + set secondblock "" + for {set i 0} {$i < 16} {incr i} { + set secondblock "b$secondblock$secondblock" + } + set l [socket -server accept 2832] + proc accept {s a p} { + fconfigure $s -blocking 0 -translation lf -buffersize 16384 \ + -buffering line + fileevent $s readable "readable $s" + } + proc readable {s} { + set l [gets $s] + fileevent $s readable {} + after 1000 respond $s + } + proc respond {s} { + global firstblock + puts -nonewline $s $firstblock + after 1000 writedata $s + } + proc writedata {s} { + global secondblock + puts -nonewline $s $secondblock + close $s + } + set s [socket [info hostname] 2832] + fconfigure $s -blocking 0 -trans lf -buffering line + set count 0 + puts $s hello + proc readit {s} { + global count done + set l [read $s] + incr count [string length $l] + if {[eof $s]} { + close $s + set done 1 + } + } + fileevent $s readable "readit $s" + set timer [after 10000 "set done timed_out"] + vwait done + after cancel $timer + close $l + set count +} 65566 +test socket-9.3 {testing EOF stickyness} { + proc count_to_eof {s} { + global count done timer + set l [gets $s] + if {[eof $s]} { + incr count + if {$count > 9} { + close $s + set done true + set count {eof is sticky} + after cancel $timer + } + } + } + proc timerproc {} { + global done count c + set done true + set count {timer went off, eof is not sticky} + close $c + } + set count 0 + set done false + proc write_then_close {s} { + puts $s bye + close $s + } + proc accept {s a p} { + fconfigure $s -buffering line -translation lf + fileevent $s writable "write_then_close $s" + } + set s [socket -server accept 2833] + set c [socket [info hostname] 2833] + fconfigure $c -blocking off -buffering line -translation lf + fileevent $c readable "count_to_eof $c" + set timer [after 1000 timerproc] + vwait done + close $s + set count +} {eof is sticky} + +removeFile script + +# +# The rest of the tests are run only if we are doing testing against +# a remote server. +# + +if {$doTestsWithRemoteServer == 0} { + return +} + +test socket-10.1 {tcp connection} { + sendCommand { + set socket9_1_test_server [socket -server accept 2834] + proc accept {s a p} { + puts $s done + close $s + } + } + set s [socket $remoteServerIP 2834] + set r [gets $s] + close $s + sendCommand {close $socket9_1_test_server} + set r +} done +test socket-10.2 {client specifies its port} { + if {[info exists port]} { + incr port + } else { + set port [expr 2048 + [pid]%1024] + } + sendCommand { + set socket9_2_test_server [socket -server accept 2835] + proc accept {s a p} { + puts $s $p + close $s + } + } + set s [socket -myport $port $remoteServerIP 2835] + set r [gets $s] + close $s + sendCommand {close $socket9_2_test_server} + if {$r == $port} { + set result ok + } else { + set result broken + } + set result +} ok +# +# Tests io-10.3, io-10.4 have been removed. +# +test socket-10.3 {trying to connect, no server} { + set status ok + if {![catch {set s [socket $remoteServerIp 2836]}]} { + if {![catch {gets $s}]} { + set status broken + } + close $s + } + set status +} ok +test socket-10.4 {remote echo, one line} { + sendCommand { + set socket10_6_test_server [socket -server accept 2836] + proc accept {s a p} { + fileevent $s readable [list echo $s] + fconfigure $s -buffering line -translation crlf + } + proc echo {s} { + set l [gets $s] + if {[eof $s]} { + close $s + } else { + puts $s $l + } + } + } + set f [socket $remoteServerIP 2836] + fconfigure $f -translation crlf -buffering line + puts $f hello + set r [gets $f] + close $f + sendCommand {close $socket10_6_test_server} + set r +} hello +test socket-10.5 {remote echo, 50 lines} { + sendCommand { + set socket10_7_test_server [socket -server accept 2836] + proc accept {s a p} { + fileevent $s readable [list echo $s] + fconfigure $s -buffering line -translation crlf + } + proc echo {s} { + set l [gets $s] + if {[eof $s]} { + close $s + } else { + puts $s $l + } + } + } + set f [socket $remoteServerIP 2836] + fconfigure $f -translation crlf -buffering line + for {set cnt 0} {$cnt < 50} {incr cnt} { + puts $f "hello, $cnt" + if {[string compare [gets $f] "hello, $cnt"] != 0} { + break + } + } + close $f + sendCommand {close $socket10_7_test_server} + set cnt +} 50 +# Macintosh sockets can have more than one server per port +if {$tcl_platform(platform) == "macintosh"} { + set conflictResult {0 2836} +} else { + set conflictResult {1 {couldn't open socket: address already in use}} +} +test socket-10.6 {socket conflict} { + set s1 [socket -server accept 2836] + if {[catch {set s2 [socket -server accept 2836]} msg]} { + set result [list 1 $msg] + } else { + set result [list 0 [lindex [fconfigure $s2 -sockname] 2]] + close $s2 + } + close $s1 + set result +} $conflictResult +test socket-10.7 {server with several clients} { + sendCommand { + set socket10_9_test_server [socket -server accept 2836] + proc accept {s a p} { + fconfigure $s -buffering line + fileevent $s readable [list echo $s] + } + proc echo {s} { + set l [gets $s] + if {[eof $s]} { + close $s + } else { + puts $s $l + } + } + } + set s1 [socket $remoteServerIP 2836] + fconfigure $s1 -buffering line + set s2 [socket $remoteServerIP 2836] + fconfigure $s2 -buffering line + set s3 [socket $remoteServerIP 2836] + fconfigure $s3 -buffering line + for {set i 0} {$i < 100} {incr i} { + puts $s1 hello,s1 + gets $s1 + puts $s2 hello,s2 + gets $s2 + puts $s3 hello,s3 + gets $s3 + } + close $s1 + close $s2 + close $s3 + sendCommand {close $socket10_9_test_server} + set i +} 100 +test socket-10.8 {client with several servers} { + sendCommand { + set s1 [socket -server "accept 4003" 4003] + set s2 [socket -server "accept 4004" 4004] + set s3 [socket -server "accept 4005" 4005] + proc accept {mp s a p} { + puts $s $mp + close $s + } + } + set s1 [socket $remoteServerIP 4003] + set s2 [socket $remoteServerIP 4004] + set s3 [socket $remoteServerIP 4005] + set l "" + lappend l [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \ + [gets $s3] [gets $s3] [eof $s3] + close $s1 + close $s2 + close $s3 + sendCommand { + close $s1 + close $s2 + close $s3 + } + set l +} {4003 {} 1 4004 {} 1 4005 {} 1} +test socket-10.9 {accept callback error} { + set s [socket -server accept 2836] + proc accept {s a p} {expr 10 / 0} + proc bgerror args { + global x + set x $args + } + if {[catch {sendCommand { + set peername [fconfigure $callerSocket -peername] + set s [socket [lindex $peername 0] 2836] + close $s + }} msg]} { + close $s + error $msg + } + set timer [after 10000 "set x timed_out"] + vwait x + after cancel $timer + close $s + rename bgerror {} + set x +} {{divide by zero}} +test socket-10.10 {testing socket specific options} { + sendCommand { + set socket10_12_test_server [socket -server accept 2836] + proc accept {s a p} {close $s} + } + set s [socket $remoteServerIP 2836] + set p [fconfigure $s -peername] + set n [fconfigure $s -sockname] + set l "" + lappend l [lindex $p 2] [llength $p] [llength $p] + close $s + sendCommand {close $socket10_12_test_server} + set l +} {2836 3 3} +test socket-10.11 {testing spurious events} { + sendCommand { + set socket10_13_test_server [socket -server accept 2836] + proc accept {s a p} { + fconfigure $s -translation "auto lf" + after 100 writesome $s + } + proc writesome {s} { + for {set i 0} {$i < 100} {incr i} { + puts $s "line $i from remote server" + } + close $s + } + } + set len 0 + set spurious 0 + set done 0 + proc readlittle {s} { + global spurious done len + set l [read $s 1] + if {[string length $l] == 0} { + if {![eof $s]} { + incr spurious + } else { + close $s + set done 1 + } + } else { + incr len [string length $l] + } + } + set c [socket $remoteServerIP 2836] + fileevent $c readable "readlittle $c" + set timer [after 10000 "set done timed_out"] + vwait done + after cancel $timer + sendCommand {close $socket10_13_test_server} + list $spurious $len +} {0 2690} +test socket-10.12 {testing EOF stickyness} { + set counter 0 + set done 0 + proc count_up {s} { + global counter done after_id + set l [gets $s] + if {[eof $s]} { + incr counter + if {$counter > 9} { + set done {EOF is sticky} + after cancel $after_id + close $s + } + } + } + proc timed_out {} { + global c done + set done {timed_out, EOF is not sticky} + close $c + } + sendCommand { + set socket10_14_test_server [socket -server accept 2836] + proc accept {s a p} { + after 100 close $s + } + } + set c [socket $remoteServerIP 2836] + fileevent $c readable "count_up $c" + set after_id [after 1000 timed_out] + vwait done + sendCommand {close $socket10_14_test_server} + set done +} {EOF is sticky} +test socket-10.13 {testing async write, async flush, async close} { + proc readit {s} { + global count done + set l [read $s] + incr count [string length $l] + if {[eof $s]} { + close $s + set done 1 + } + } + sendCommand { + set firstblock "" + for {set i 0} {$i < 5} {incr i} { + set firstblock "a$firstblock$firstblock" + } + set secondblock "" + for {set i 0} {$i < 16} {incr i} { + set secondblock "b$secondblock$secondblock" + } + set l [socket -server accept 2845] + proc accept {s a p} { + fconfigure $s -blocking 0 -translation lf -buffersize 16384 \ + -buffering line + fileevent $s readable "readable $s" + } + proc readable {s} { + set l [gets $s] + fileevent $s readable {} + after 1000 respond $s + } + proc respond {s} { + global firstblock + puts -nonewline $s $firstblock + after 1000 writedata $s + } + proc writedata {s} { + global secondblock + puts -nonewline $s $secondblock + close $s + } + } + set s [socket $remoteServerIP 2845] + fconfigure $s -blocking 0 -trans lf -buffering line + set count 0 + puts $s hello + fileevent $s readable "readit $s" + set timer [after 10000 "set done timed_out"] + vwait done + after cancel $timer + sendCommand {close $l} + set count +} 65566 + +if {[string match sock* $commandSocket] == 1} { + puts $commandSocket exit + flush $commandSocket +} +catch {close $commandSocket} +catch {close $remoteProcChan} + +set x "" +unset x diff --git a/tests/source.test b/tests/source.test new file mode 100644 index 0000000..9a7e230 --- /dev/null +++ b/tests/source.test @@ -0,0 +1,187 @@ +# Commands covered: source +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) source.test 1.26 97/09/24 16:33:37 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test source-1.1 {source command} { + set x "old x value" + set y "old y value" + set z "old z value" + makeFile { + set x 22 + set y 33 + set z 44 + } source.file + source source.file + list $x $y $z +} {22 33 44} +test source-1.2 {source command} { + makeFile {list result} source.file + source source.file +} result + +# The mac version of source returns a different result for +# the next two tests. + +if {$tcl_platform(platform) == "macintosh"} { + set retMsg1 {1 {wrong # args: should be "source fileName" or "source -rsrc name ?fileName?" or "source -rsrcid id ?fileName?"}} + set retMsg2 {1 {bad argument: should be "source fileName" or "source -rsrc name ?fileName?" or "source -rsrcid id ?fileName?"}} +} else { + set retMsg1 {1 {wrong # args: should be "source fileName"}} + set retMsg2 {1 {wrong # args: should be "source fileName"}} +} +test source-2.1 {source error conditions} { + list [catch {source} msg] $msg +} $retMsg1 +test source-2.2 {source error conditions} { + list [catch {source a b} msg] $msg +} $retMsg2 +test source-2.3 {source error conditions} { + makeFile { + set x 146 + error "error in sourced file" + set y $x + } source.file + list [catch {source source.file} msg] $msg $errorInfo +} {1 {error in sourced file} {error in sourced file + while executing +"error "error in sourced file"" + (file "source.file" line 3) + invoked from within +"source source.file"}} +test source-2.4 {source error conditions} { + makeFile {break} source.file + catch {source source.file} +} 3 +test source-2.5 {source error conditions} { + makeFile {continue} source.file + catch {source source.file} +} 4 +test source-2.6 {source error conditions} { + normalizeMsg [list [catch {source _non_existent_} msg] $msg $errorCode] +} {1 {couldn't read file "_non_existent_": no such file or directory} {posix enoent {no such file or directory}}} + +test source-3.1 {return in middle of source file} { + makeFile { + set x new-x + return allDone + set y new-y + } source.file + set x old-x + set y old-y + set z [source source.file] + list $x $y $z +} {new-x old-y allDone} +test source-3.2 {return with special code etc.} { + makeFile { + set x new-x + return -code break "Silly result" + set y new-y + } source.file + list [catch {source source.file} msg] $msg +} {3 {Silly result}} +test source-3.3 {return with special code etc.} { + makeFile { + set x new-x + return -code error "Simulated error" + set y new-y + } source.file + list [catch {source source.file} msg] $msg $errorInfo $errorCode +} {1 {Simulated error} {Simulated error + while executing +"source source.file"} NONE} +test source-3.4 {return with special code etc.} { + makeFile { + set x new-x + return -code error -errorinfo "Simulated errorInfo stuff" + set y new-y + } source.file + list [catch {source source.file} msg] $msg $errorInfo $errorCode +} {1 {} {Simulated errorInfo stuff + invoked from within +"source source.file"} NONE} +test source-3.5 {return with special code etc.} { + makeFile { + set x new-x + return -code error -errorinfo "Simulated errorInfo stuff" \ + -errorcode {a b c} + set y new-y + } source.file + list [catch {source source.file} msg] $msg $errorInfo $errorCode +} {1 {} {Simulated errorInfo stuff + invoked from within +"source source.file"} {a b c}} + +# Test for the Macintosh specfic features of the source command +test source-4.1 {source error conditions} {macOnly} { + list [catch {source -rsrc _no_exist_} msg] $msg +} [list 1 "The resource \"_no_exist_\" could not be loaded from application."] +test source-4.2 {source error conditions} {macOnly} { + list [catch {source -rsrcid bad_id} msg] $msg +} [list 1 "expected integer but got \"bad_id\""] +test source-4.3 {source error conditions} {macOnly} { + list [catch {source -rsrc rsrcName fileName extra} msg] $msg +} $retMsg1 +test source-4.4 {source error conditions} {macOnly} { + list [catch {source non_switch rsrcName} msg] $msg +} $retMsg2 +test source-4.5 {source error conditions} {macOnly} { + list [catch {source -bad_switch argument} msg] $msg +} $retMsg2 +test source-5.1 {source resource files} {macOnly} { + list [catch {source -rsrc rsrcName bad_file} msg] $msg +} [list 1 "Error finding the file: \"bad_file\"."] +test source-5.2 {source resource files} {macOnly} { + makeFile {return} source.file + list [catch {source -rsrc rsrcName source.file} msg] $msg +} [list 1 "Error reading the file: \"source.file\"."] +test source-5.3 {source resource files} {macOnly} { + testWriteTextResource -rsrc rsrcName -file rsrc.file {set msg2 ok; return} + set result [catch {source -rsrc rsrcName rsrc.file} msg] + removeFile rsrc.file + list $msg2 $result $msg +} [list ok 0 {}] +test source-5.4 {source resource files} {macOnly} { + catch {unset msg2} + testWriteTextResource -rsrc fileRsrcName -file rsrc.file {set msg2 ok; return} + source -rsrc fileRsrcName rsrc.file + set result [catch {source -rsrc fileRsrcName} msg] + removeFile rsrc.file + list $msg2 $result $msg +} [list ok 1 {The resource "fileRsrcName" could not be loaded from application.}] +test source-5.5 {source resource files} {macOnly} { + testWriteTextResource -rsrcid 200 -file rsrc.file {set msg2 hello; set msg3 bye} + set result [catch {source -rsrcid 200 rsrc.file} msg] + removeFile rsrc.file + list $msg2 $result $msg +} [list hello 0 bye] +test source-5.6 {source resource files} {macOnly} { + testWriteTextResource -rsrcid 200 -file rsrc.file {set msg2 hello; error bad; set msg3 bye} + set result [catch {source -rsrcid 200 rsrc.file} msg] + removeFile rsrc.file + list $msg2 $result $msg +} [list hello 1 bad] + +test source-6.1 {source is binary ok} { + set x {} + makeFile [list set x "a b\0c"] source.file + source source.file + string length $x +} 5 + +catch {removeFile source.file} + +# Generate null final value + +concat {} diff --git a/tests/split.test b/tests/split.test new file mode 100644 index 0000000..a57c714 --- /dev/null +++ b/tests/split.test @@ -0,0 +1,65 @@ +# Commands covered: split +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) split.test 1.10 97/07/07 16:30:07 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test split-1.1 {basic split commands} { + split "a\n b\t\r c\n " +} {a {} b {} {} c {} {}} +test split-1.2 {basic split commands} { + split "word 1xyzword 2zword 3" xyz +} {{word 1} {} {} {word 2} {word 3}} +test split-1.3 {basic split commands} { + split "12345" {} +} {1 2 3 4 5} +test split-1.4 {basic split commands} { + split "a\}b\[c\{\]\$" +} "a\\}b\\\[c\\{\\\]\\\$" +test split-1.5 {basic split commands} { + split {} {} +} {} +test split-1.6 {basic split commands} { + split {} +} {} +test split-1.7 {basic split commands} { + split { } +} {{} {} {} {}} +test split-1.8 {basic split commands} { + proc foo {} { + set x {} + foreach f [split {]\n} {}] { + append x $f + } + return $x + } + foo +} {]\n} +test split-1.9 {basic split commands} { + proc foo {} { + set x ab\000c + set y [split $x {}] + return $y + } + foo +} "a b \000 c" +test split-1.10 {basic split commands} { + split "a0ab1b2bbb3\000c4" ab\000c +} {{} 0 {} 1 2 {} {} 3 {} 4} + +test split-2.1 {split errors} { + list [catch split msg] $msg $errorCode +} {1 {wrong # args: should be "split string ?splitChars?"} NONE} +test split-2.2 {split errors} { + list [catch {split a b c} msg] $msg $errorCode +} {1 {wrong # args: should be "split string ?splitChars?"} NONE} diff --git a/tests/string.test b/tests/string.test new file mode 100644 index 0000000..6643d4f --- /dev/null +++ b/tests/string.test @@ -0,0 +1,384 @@ +# Commands covered: string +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) string.test 1.15 97/07/02 16:49:27 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test string-1.1 {string compare} { + string compare abcde abdef +} -1 +test string-1.2 {string compare} { + string c abcde ABCDE +} 1 +test string-1.3 {string compare} { + string compare abcde abcde +} 0 +test string-1.4 {string compare} { + list [catch {string compare a} msg] $msg +} {1 {wrong # args: should be "string compare string1 string2"}} +test string-1.5 {string compare} { + list [catch {string compare a b c} msg] $msg +} {1 {wrong # args: should be "string compare string1 string2"}} + +test string-2.1 {string first} { + string first bq abcdefgbcefgbqrs +} 12 +test string-2.2 {string first} { + string fir bcd abcdefgbcefgbqrs +} 1 +test string-2.3 {string first} { + string f b abcdefgbcefgbqrs +} 1 +test string-2.4 {string first} { + string first xxx x123xx345xxx789xxx012 +} 9 +test string-2.5 {string first} { + string first "" x123xx345xxx789xxx012 +} -1 +test string-2.6 {string first} { + list [catch {string first a} msg] $msg +} {1 {wrong # args: should be "string first string1 string2"}} +test string-2.7 {string first} { + list [catch {string first a b c} msg] $msg +} {1 {wrong # args: should be "string first string1 string2"}} + +test string-3.1 {string index} { + string index abcde 0 +} a +test string-3.2 {string index} { + string i abcde 4 +} e +test string-3.3 {string index} { + string index abcde 5 +} {} +test string-3.4 {string index} { + list [catch {string index abcde -10} msg] $msg +} {0 {}} +test string-3.5 {string index} { + list [catch {string index} msg] $msg +} {1 {wrong # args: should be "string index string charIndex"}} +test string-3.6 {string index} { + list [catch {string index a b c} msg] $msg +} {1 {wrong # args: should be "string index string charIndex"}} +test string-3.7 {string index} { + list [catch {string index a xyz} msg] $msg +} {1 {expected integer but got "xyz"}} + +test string-4.1 {string last} { + string la xxx xxxx123xx345x678 +} 1 +test string-4.2 {string last} { + string last xx xxxx123xx345x678 +} 7 +test string-4.3 {string last} { + string las x xxxx123xx345x678 +} 12 +test string-4.4 {string last} { + list [catch {string last a} msg] $msg +} {1 {wrong # args: should be "string last string1 string2"}} +test string-4.5 {string last} { + list [catch {string last a b c} msg] $msg +} {1 {wrong # args: should be "string last string1 string2"}} + +test string-5.1 {string length} { + string length "a little string" +} 15 +test string-5.2 {string length} { + string le "" +} 0 +test string-5.3 {string length} { + list [catch {string length} msg] $msg +} {1 {wrong # args: should be "string length string"}} +test string-5.4 {string length} { + list [catch {string length a b} msg] $msg +} {1 {wrong # args: should be "string length string"}} + +test string-6.1 {string match} { + string match abc abc +} 1 +test string-6.2 {string match} { + string m abc abd +} 0 +test string-6.3 {string match} { + string match ab*c abc +} 1 +test string-6.4 {string match} { + string match ab**c abc +} 1 +test string-6.5 {string match} { + string match ab* abcdef +} 1 +test string-6.6 {string match} { + string match *c abc +} 1 +test string-6.7 {string match} { + string match *3*6*9 0123456789 +} 1 +test string-6.8 {string match} { + string match *3*6*9 01234567890 +} 0 +test string-6.9 {string match} { + string match a?c abc +} 1 +test string-6.10 {string match} { + string match a??c abc +} 0 +test string-6.11 {string match} { + string match ?1??4???8? 0123456789 +} 1 +test string-6.12 {string match} { + string match {[abc]bc} abc +} 1 +test string-6.13 {string match} { + string match {a[abc]c} abc +} 1 +test string-6.14 {string match} { + string match {a[xyz]c} abc +} 0 +test string-6.15 {string match} { + string match {12[2-7]45} 12345 +} 1 +test string-6.16 {string match} { + string match {12[ab2-4cd]45} 12345 +} 1 +test string-6.17 {string match} { + string match {12[ab2-4cd]45} 12b45 +} 1 +test string-6.18 {string match} { + string match {12[ab2-4cd]45} 12d45 +} 1 +test string-6.19 {string match} { + string match {12[ab2-4cd]45} 12145 +} 0 +test string-6.20 {string match} { + string match {12[ab2-4cd]45} 12545 +} 0 +test string-6.21 {string match} { + string match {a\*b} a*b +} 1 +test string-6.22 {string match} { + string match {a\*b} ab +} 0 +test string-6.23 {string match} { + string match {a\*\?\[\]\\\x} "a*?\[\]\\x" +} 1 +test string-6.24 {string match} { + string match ** "" +} 1 +test string-6.25 {string match} { + string match *. "" +} 0 +test string-6.26 {string match} { + string match "" "" +} 1 +test string-6.27 {string match} { + string match \[a a +} 1 +test string-6.28 {string match} { + list [catch {string match a} msg] $msg +} {1 {wrong # args: should be "string match pattern string"}} +test string-6.29 {string match} { + list [catch {string match a b c} msg] $msg +} {1 {wrong # args: should be "string match pattern string"}} + +test string-7.1 {string range} { + string range abcdefghijklmnop 2 14 +} {cdefghijklmno} +test string-7.2 {string range} { + string range abcdefghijklmnop 7 1000 +} {hijklmnop} +test string-7.3 {string range} { + string range abcdefghijklmnop 10 e +} {klmnop} +test string-7.4 {string range} { + string range abcdefghijklmnop 10 9 +} {} +test string-7.5 {string range} { + string range abcdefghijklmnop -3 2 +} {abc} +test string-7.6 {string range} { + string range abcdefghijklmnop -3 -2 +} {} +test string-7.7 {string range} { + string range abcdefghijklmnop 1000 1010 +} {} +test string-7.8 {string range} { + string range abcdefghijklmnop -100 end +} {abcdefghijklmnop} +test string-7.9 {string range} { + list [catch {string range} msg] $msg +} {1 {wrong # args: should be "string range string first last"}} +test string-7.10 {string range} { + list [catch {string range a 1} msg] $msg +} {1 {wrong # args: should be "string range string first last"}} +test string-7.11 {string range} { + list [catch {string range a 1 2 3} msg] $msg +} {1 {wrong # args: should be "string range string first last"}} +test string-7.12 {string range} { + list [catch {string range abc abc 1} msg] $msg +} {1 {bad index "abc": must be integer or "end"}} +test string-7.13 {string range} { + list [catch {string range abc 1 eof} msg] $msg +} {1 {bad index "eof": must be integer or "end"}} +test string-7.14 {string range} { + string range abcdefghijklmnop end end +} {p} +test string-7.15 {string range} { + string range abcdefghijklmnop e 1000 +} {p} + +test string-8.1 {string trim} { + string trim " XYZ " +} {XYZ} +test string-8.2 {string trim} { + string trim "\t\nXYZ\t\n\r\n" +} {XYZ} +test string-8.3 {string trim} { + string trim " A XYZ A " +} {A XYZ A} +test string-8.4 {string trim} { + string trim "XXYYZZABC XXYYZZ" ZYX +} {ABC } +test string-8.5 {string trim} { + string trim " \t\r " +} {} +test string-8.6 {string trim} { + string trim {abcdefg} {} +} {abcdefg} +test string-8.7 {string trim} { + string trim {} +} {} +test string-8.8 {string trim} { + string trim ABC DEF +} {ABC} +test string-8.9 {string trim} { + list [catch {string trim} msg] $msg +} {1 {wrong # args: should be "string trim string ?chars?"}} +test string-8.10 {string trim} { + list [catch {string trim a b c} msg] $msg +} {1 {wrong # args: should be "string trim string ?chars?"}} + +test string-9.1 {string trimleft} { + string trimleft " XYZ " +} {XYZ } +test string-9.2 {string trimleft} { + list [catch {string trimleft} msg] $msg +} {1 {wrong # args: should be "string trimleft string ?chars?"}} + +test string-10.1 {string trimright} { + string trimright " XYZ " +} { XYZ} +test string-10.2 {string trimright} { + string trimright " " +} {} +test string-10.3 {string trimright} { + string trimright "" +} {} +test string-10.4 {string trimright errors} { + list [catch {string trimright} msg] $msg +} {1 {wrong # args: should be "string trimright string ?chars?"}} +test string-10.5 {string trimright errors} { + list [catch {string trimg a} msg] $msg +} {1 {bad option "trimg": must be compare, first, index, last, length, match, range, tolower, toupper, trim, trimleft, trimright, wordend, or wordstart}} + +test string-11.1 {string tolower} { + string tolower ABCDeF +} {abcdef} +test string-11.2 {string tolower} { + string tolower "ABC XyZ" +} {abc xyz} +test string-11.3 {string tolower} { + string tolower {123#$&*()} +} {123#$&*()} +test string-11.4 {string tolower} { + list [catch {string tolower} msg] $msg +} {1 {wrong # args: should be "string tolower string"}} +test string-11.5 {string tolower} { + list [catch {string tolower a b} msg] $msg +} {1 {wrong # args: should be "string tolower string"}} + +test string-12.1 {string toupper} { + string toupper abCDEf +} {ABCDEF} +test string-12.2 {string toupper} { + string toupper "abc xYz" +} {ABC XYZ} +test string-12.3 {string toupper} { + string toupper {123#$&*()} +} {123#$&*()} +test string-12.4 {string toupper} { + list [catch {string toupper} msg] $msg +} {1 {wrong # args: should be "string toupper string"}} +test string-12.5 {string toupper} { + list [catch {string toupper a b} msg] $msg +} {1 {wrong # args: should be "string toupper string"}} + +test string-13.1 {string wordend} { + list [catch {string wordend a} msg] $msg +} {1 {wrong # args: should be "string wordend string index"}} +test string-13.2 {string wordend} { + list [catch {string wordend a b c} msg] $msg +} {1 {wrong # args: should be "string wordend string index"}} +test string-13.3 {string wordend} { + list [catch {string wordend a gorp} msg] $msg +} {1 {expected integer but got "gorp"}} +test string-13.4 {string wordend} { + string wordend abc. -1 +} 3 +test string-13.5 {string wordend} { + string wordend abc. 100 +} 4 +test string-13.6 {string wordend} { + string wordend "word_one two three" 2 +} 8 +test string-13.7 {string wordend} { + string wordend "one .&# three" 5 +} 6 +test string-13.8 {string wordend} { + string worde "x.y" 0 +} 1 + +test string-14.1 {string wordstart} { + list [catch {string word a} msg] $msg +} {1 {ambiguous option "word": must be compare, first, index, last, length, match, range, tolower, toupper, trim, trimleft, trimright, wordend, or wordstart}} +test string-14.2 {string wordstart} { + list [catch {string wordstart a} msg] $msg +} {1 {wrong # args: should be "string wordstart string index"}} +test string-14.3 {string wordstart} { + list [catch {string wordstart a b c} msg] $msg +} {1 {wrong # args: should be "string wordstart string index"}} +test string-14.4 {string wordstart} { + list [catch {string wordstart a gorp} msg] $msg +} {1 {expected integer but got "gorp"}} +test string-14.5 {string wordstart} { + string wordstart "one two three_words" 400 +} 8 +test string-14.6 {string wordstart} { + string wordstart "one two three_words" 2 +} 0 +test string-14.7 {string wordend} { + string wordstart "one two three_words" -2 +} 0 +test string-14.8 {string wordend} { + string wordstart "one .*&^ three" 6 +} 6 +test string-14.9 {string wordend} { + string wordstart "one two three" 4 +} 4 + +test string-15.1 {error conditions} { + list [catch {string gorp a b} msg] $msg +} {1 {bad option "gorp": must be compare, first, index, last, length, match, range, tolower, toupper, trim, trimleft, trimright, wordend, or wordstart}} +test string-15.2 {error conditions} { + list [catch {string} msg] $msg +} {1 {wrong # args: should be "string option arg ?arg ...?"}} diff --git a/tests/stringObj.test b/tests/stringObj.test new file mode 100644 index 0000000..3d03bad --- /dev/null +++ b/tests/stringObj.test @@ -0,0 +1,189 @@ +# Commands covered: none +# +# This file contains tests for the procedures in tclStringObj.c +# that implement the Tcl type manager for the string type. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1995-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# @(#) stringObj.test 1.8 97/04/09 11:29:37 + +if {[info commands testobj] == {}} { + puts "This application hasn't been compiled with the \"testobj\"" + puts "command, so I can't test the Tcl type and object support." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +test stringObj-1.1 {string type registration} { + set t [testobj types] + set first [string first "string" $t] + set result [expr {$first != -1}] +} {1} + +test stringObj-2.1 {Tcl_NewStringObj} { + set result "" + lappend result [testobj freeallvars] + lappend result [teststringobj set 1 abcd] + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} abcd string 2} + +test stringObj-3.1 {Tcl_SetStringObj, existing "empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testobj newobj 1] + lappend result [teststringobj set 1 xyz] ;# makes existing obj a string + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} {} xyz string 2} +test stringObj-3.2 {Tcl_SetStringObj, existing non-"empty string" object} { + set result "" + lappend result [testobj freeallvars] + lappend result [testintobj set 1 512] + lappend result [teststringobj set 1 foo] ;# makes existing obj a string + lappend result [testobj type 1] + lappend result [testobj refcount 1] +} {{} 512 foo string 2} + +test stringObj-4.1 {Tcl_SetObjLength procedure, string gets shorter} { + testobj freeallvars + teststringobj set 1 test + teststringobj setlength 1 3 + list [teststringobj length 1] [teststringobj length2 1] \ + [teststringobj get 1] +} {3 4 tes} +test stringObj-4.2 {Tcl_SetObjLength procedure, string gets longer} { + testobj freeallvars + teststringobj set 1 abcdef + teststringobj setlength 1 10 + list [teststringobj length 1] [teststringobj length2 1] +} {10 10} +test stringObj-4.3 {Tcl_SetObjLength procedure, string gets longer} { + testobj freeallvars + teststringobj set 1 abcdef + teststringobj append 1 xyzq -1 + list [teststringobj length 1] [teststringobj length2 1] \ + [teststringobj get 1] +} {10 20 abcdefxyzq} +test stringObj-4.4 {Tcl_SetObjLength procedure, "expty string", length 0} { + testobj freeallvars + testobj newobj 1 + teststringobj setlength 1 0 + list [teststringobj length2 1] [teststringobj get 1] +} {0 {}} + +test stringObj-5.1 {Tcl_AppendToObj procedure, type conversion} { + testobj freeallvars + testintobj set2 1 43 + teststringobj append 1 xyz -1 + teststringobj get 1 +} {43xyz} +test stringObj-5.2 {Tcl_AppendToObj procedure, length calculation} { + testobj freeallvars + teststringobj set 1 {x y } + teststringobj append 1 bbCCddEE 4 + teststringobj append 1 123 -1 + teststringobj get 1 +} {x y bbCC123} +test stringObj-5.3 {Tcl_AppendToObj procedure, reallocating space} { + testobj freeallvars + teststringobj set 1 xyz + teststringobj setlength 1 15 + teststringobj setlength 1 2 + set result {} + teststringobj append 1 1234567890123 -1 + lappend result [teststringobj length 1] [teststringobj length2 1] + teststringobj setlength 1 10 + teststringobj append 1 abcdef -1 + lappend result [teststringobj length 1] [teststringobj length2 1] \ + [teststringobj get 1] +} {15 15 16 32 xy12345678abcdef} + +test stringObj-6.1 {Tcl_AppendStringsToObj procedure, type conversion} { + testobj freeallvars + teststringobj set2 1 [list a b] + teststringobj appendstrings 1 xyz { 1234 } foo + teststringobj get 1 +} {a bxyz 1234 foo} +test stringObj-6.2 {Tcl_AppendStringsToObj procedure, counting space} { + testobj freeallvars + teststringobj set 1 abc + teststringobj appendstrings 1 + list [teststringobj length 1] [teststringobj get 1] +} {3 abc} +test stringObj-6.3 {Tcl_AppendStringsToObj procedure, counting space} { + testobj freeallvars + teststringobj set 1 abc + teststringobj appendstrings 1 {} {} {} {} + list [teststringobj length 1] [teststringobj get 1] +} {3 abc} +test stringObj-6.4 {Tcl_AppendStringsToObj procedure, counting space} { + testobj freeallvars + teststringobj set 1 abc + teststringobj appendstrings 1 { 123 } abcdefg + list [teststringobj length 1] [teststringobj get 1] +} {15 {abc 123 abcdefg}} +test stringObj-6.5 {Tcl_AppendStringsToObj procedure, don't double space if initial string empty} { + testobj freeallvars + testobj newobj 1 + teststringobj appendstrings 1 123 abcdefg + list [teststringobj length 1] [teststringobj length2 1] [teststringobj get 1] +} {10 10 123abcdefg} +test stringObj-6.6 {Tcl_AppendStringsToObj procedure, space reallocation} { + testobj freeallvars + teststringobj set 1 abc + teststringobj setlength 1 10 + teststringobj setlength 1 2 + teststringobj appendstrings 1 34567890 + list [teststringobj length 1] [teststringobj length2 1] \ + [teststringobj get 1] +} {10 10 ab34567890} +test stringObj-6.7 {Tcl_AppendStringsToObj procedure, space reallocation} { + testobj freeallvars + teststringobj set 1 abc + teststringobj setlength 1 10 + teststringobj setlength 1 2 + teststringobj appendstrings 1 34567890x + list [teststringobj length 1] [teststringobj length2 1] \ + [teststringobj get 1] +} {11 22 ab34567890x} +test stringObj-6.8 {Tcl_AppendStringsToObj procedure, object totally empty} { + testobj freeallvars + testobj newobj 1 + teststringobj appendstrings 1 {} + list [teststringobj length2 1] [teststringobj get 1] +} {0 {}} + +test stringObj-7.1 {ConvertToStringType procedure} { + testobj freeallvars + teststringobj set2 1 [list a b] + teststringobj append 1 x -1 + list [teststringobj length 1] [teststringobj length2 1] \ + [teststringobj get 1] +} {4 8 {a bx}} +test stringObj-7.2 {ConvertToStringType procedure, null object} { + testobj freeallvars + testobj newobj 1 + teststringobj appendstrings 1 {} + list [teststringobj length 1] [teststringobj length2 1] \ + [teststringobj get 1] +} {0 0 {}} + +test stringObj-8.1 {DupStringInternalRep procedure} { + testobj freeallvars + teststringobj set 1 {} + teststringobj append 1 abcde -1 + testobj duplicate 1 2 + list [teststringobj length 1] [teststringobj length2 1] \ + [teststringobj length 2] [teststringobj length2 2] \ + [teststringobj get 2] +} {5 10 5 5 abcde} + +testobj freeallvars diff --git a/tests/subst.test b/tests/subst.test new file mode 100644 index 0000000..356114d --- /dev/null +++ b/tests/subst.test @@ -0,0 +1,106 @@ +# Commands covered: subst +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1994 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) subst.test 1.8 97/06/23 18:20:15 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test subst-1.1 {basics} { + list [catch {subst} msg] $msg +} {1 {wrong # args: should be "subst ?-nobackslashes? ?-nocommands? ?-novariables? string"}} +test subst-1.2 {basics} { + list [catch {subst a b c} msg] $msg +} {1 {wrong # args: should be "subst ?-nobackslashes? ?-nocommands? ?-novariables? string"}} + +test subst-2.1 {simple strings} { + subst {} +} {} +test subst-2.2 {simple strings} { + subst a +} a +test subst-2.3 {simple strings} { + subst abcdefg +} abcdefg + +test subst-3.1 {backslash substitutions} { + subst {\x\$x\[foo bar]\\} +} "x\$x\[foo bar]\\" + +test subst-4.1 {variable substitutions} { + set a 44 + subst {$a} +} {44} +test subst-4.2 {variable substitutions} { + set a 44 + subst {x$a.y{$a}.z} +} {x44.y{44}.z} +test subst-4.3 {variable substitutions} { + catch {unset a} + set a(13) 82 + set i 13 + subst {x.$a($i)} +} {x.82} +catch {unset a} +set long {This is a very long string, intentionally made so long that it + will overflow the static character size for dstrings, so that + additional memory will have to be allocated by subst. That way, + if the subst procedure forgets to free up memory while returning + an error, there will be memory that isn't freed (this will be + detected when the tests are run under a checking memory allocator + such as Purify).} +test subst-4.4 {variable substitutions} { + list [catch {subst {$long $a}} msg] $msg +} {1 {can't read "a": no such variable}} + +test subst-5.1 {command substitutions} { + subst {[concat {}]} +} {} +test subst-5.2 {command substitutions} { + subst {[concat A test string]} +} {A test string} +test subst-5.3 {command substitutions} { + subst {x.[concat foo].y.[concat bar].z} +} {x.foo.y.bar.z} +test subst-5.4 {command substitutions} { + list [catch {subst {$long [set long] [bogus_command]}} msg] $msg +} {1 {invalid command name "bogus_command"}} + +test subst-6.1 {clear the result after command substitution} { + catch {unset a} + list [catch {subst {[concat foo] $a}} msg] $msg +} {1 {can't read "a": no such variable}} + +test subst-7.1 {switches} { + list [catch {subst foo bar} msg] $msg +} {1 {wrong # args: should be "subst ?-nobackslashes? ?-nocommands? ?-novariables? string"}} +test subst-7.2 {switches} { + list [catch {subst -no bar} msg] $msg +} {1 {bad switch "-no": must be -nobackslashes, -nocommands, or -novariables}} +test subst-7.3 {switches} { + list [catch {subst -bogus bar} msg] $msg +} {1 {bad switch "-bogus": must be -nobackslashes, -nocommands, or -novariables}} +test subst-7.4 {switches} { + set x 123 + subst -nobackslashes {abc $x [expr 1+2] \\\x41} +} {abc 123 3 \\\x41} +test subst-7.5 {switches} { + set x 123 + subst -nocommands {abc $x [expr 1+2] \\\x41} +} {abc 123 [expr 1+2] \A} +test subst-7.6 {switches} { + set x 123 + subst -novariables {abc $x [expr 1+2] \\\x41} +} {abc $x 3 \A} +test subst-7.7 {switches} { + set x 123 + subst -nov -nob -noc {abc $x [expr 1+2] \\\x41} +} {abc $x [expr 1+2] \\\x41} diff --git a/tests/switch.test b/tests/switch.test new file mode 100644 index 0000000..347e7a5 --- /dev/null +++ b/tests/switch.test @@ -0,0 +1,179 @@ +# Commands covered: switch +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) switch.test 1.7 97/02/10 17:27:13 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test switch-1.1 {simple patterns} { + switch a a {format 1} b {format 2} c {format 3} default {format 4} +} 1 +test switch-1.2 {simple patterns} { + switch b a {format 1} b {format 2} c {format 3} default {format 4} +} 2 +test switch-1.3 {simple patterns} { + switch x a {format 1} b {format 2} c {format 3} default {format 4} +} 4 +test switch-1.4 {simple patterns} { + switch x a {format 1} b {format 2} c {format 3} +} {} +test switch-1.5 {simple pattern matches many times} { + switch b a {format 1} b {format 2} b {format 3} b {format 4} +} 2 +test switch-1.6 {simple patterns} { + switch default a {format 1} default {format 2} c {format 3} default {format 4} +} 2 +test switch-1.7 {simple patterns} { + switch x a {format 1} default {format 2} c {format 3} default {format 4} +} 4 + +test switch-2.1 {single-argument form for pattern/command pairs} { + switch b { + a {format 1} + b {format 2} + default {format 6} + } +} {2} +test switch-2.2 {single-argument form for pattern/command pairs} { + list [catch {switch z {a 2 b}} msg] $msg +} {1 {extra switch pattern with no body}} + +test switch-3.1 {-exact vs. -glob vs. -regexp} { + switch -exact aaaab { + ^a*b$ {concat regexp} + *b {concat glob} + aaaab {concat exact} + default {concat none} + } +} exact +test switch-3.2 {-exact vs. -glob vs. -regexp} { + switch -exact -regexp aaaab { + ^a*b$ {concat regexp} + *b {concat glob} + aaaab {concat exact} + default {concat none} + } +} regexp +test switch-3.3 {-exact vs. -glob vs. -regexp} { + switch -glob aaaab { + ^a*b$ {concat regexp} + *b {concat glob} + aaaab {concat exact} + default {concat none} + } +} glob +test switch-3.4 {-exact vs. -glob vs. -regexp} { + switch aaaab {^a*b$} {concat regexp} *b {concat glob} \ + aaaab {concat exact} default {concat none} +} exact +test switch-3.5 {-exact vs. -glob vs. -regexp} { + switch -- -glob { + ^g.*b$ {concat regexp} + -* {concat glob} + -glob {concat exact} + default {concat none} + } +} exact +test switch-3.6 {-exact vs. -glob vs. -regexp} { + list [catch {switch -foo a b c} msg] $msg +} {1 {bad option "-foo": must be -exact, -glob, -regexp, or --}} + +test switch-4.1 {error in executed command} { + list [catch {switch a a {error "Just a test"} default {format 1}} msg] \ + $msg $errorInfo +} {1 {Just a test} {Just a test + while executing +"error "Just a test"" + ("a" arm line 1) + invoked from within +"switch a a {error "Just a test"} default {format 1}"}} +test switch-4.2 {error: not enough args} { + list [catch {switch} msg] $msg +} {1 {wrong # args: should be "switch ?switches? string pattern body ... ?default body?"}} +test switch-4.3 {error: pattern with no body} { + list [catch {switch a b} msg] $msg +} {1 {extra switch pattern with no body}} +test switch-4.4 {error: pattern with no body} { + list [catch {switch a b {format 1} c} msg] $msg +} {1 {extra switch pattern with no body}} +test switch-4.5 {error in default command} { + list [catch {switch foo a {error switch1} b {error switch 3} \ + default {error switch2}} msg] $msg $errorInfo +} {1 switch2 {switch2 + while executing +"error switch2" + ("default" arm line 1) + invoked from within +"switch foo a {error switch1} b {error switch 3} default {error switch2}"}} + +test switch-5.1 {errors in -regexp matching} { + list [catch {switch -regexp aaaab { + *b {concat glob} + aaaab {concat exact} + default {concat none} + }} msg] $msg +} {1 {couldn't compile regular expression pattern: ?+* follows nothing}} + +test switch-6.1 {backslashes in patterns} { + switch -exact {\a\$\.\[} { + \a\$\.\[ {concat first} + \a\\$\.\\[ {concat second} + \\a\\$\\.\\[ {concat third} + {\a\\$\.\\[} {concat fourth} + {\\a\\$\\.\\[} {concat fifth} + default {concat none} + } +} third +test switch-6.2 {backslashes in patterns} { + switch -exact {\a\$\.\[} { + \a\$\.\[ {concat first} + {\a\$\.\[} {concat second} + {{\a\$\.\[}} {concat third} + default {concat none} + } +} second + +test switch-7.1 {"-" bodies} { + switch a { + a - + b - + c {concat 1} + default {concat 2} + } +} 1 +test switch-7.2 {"-" bodies} { + list [catch { + switch a { + a - + b - + c - + } + } msg] $msg +} {1 {no body specified for pattern "a"}} +test switch-7.3 {"-" bodies} { + list [catch { + switch a { + a - + b -foo + c - + } + } msg] $msg +} {1 {invalid command name "-foo"}} + +test switch-8.1 {empty body} { + set msg {} + switch {2} { + 1 {set msg 1} + 2 {} + default {set msg 2} + } +} {} diff --git a/tests/timer.test b/tests/timer.test new file mode 100644 index 0000000..4671366 --- /dev/null +++ b/tests/timer.test @@ -0,0 +1,455 @@ +# This file contains a collection of tests for the procedures in the +# file tclTimer.c, which includes the "after" Tcl command. Sourcing +# this file into Tcl runs the tests and generates output for errors. +# No output means no errors were found. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1997 by Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) timer.test 1.2 97/04/29 11:59:59 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test timer-1.1 {Tcl_CreateTimerHandler procedure} { + foreach i [after info] { + after cancel $i + } + set x "" + foreach i {100 200 1000 50 150} { + after $i lappend x $i + } + after 200 + update + set x +} {50 100 150 200} + +test timer-2.1 {Tcl_DeleteTimerHandler procedure} { + foreach i [after info] { + after cancel $i + } + set x "" + foreach i {100 200 300 50 150} { + after $i lappend x $i + } + after cancel lappend x 150 + after cancel lappend x 50 + after 200 + update + set x +} {100 200} + +# No tests for Tcl_ServiceTimer or ResetTimer, since it is already tested +# above. + +test timer-3.1 {TimerHandlerEventProc procedure: event masks} { + set x start + after 100 { set x fired } + update idletasks + set result $x + after 200 + update + lappend result $x +} {start fired} +test timer-3.2 {TimerHandlerEventProc procedure: multiple timers} { + foreach i [after info] { + after cancel $i + } + foreach i {200 600 1000} { + after $i lappend x $i + } + after 200 + set result "" + set x "" + update + lappend result $x + after 400 + update + lappend result $x + after 400 + update + lappend result $x +} {200 {200 600} {200 600 1000}} +test timer-3.3 {TimerHandlerEventProc procedure: reentrant timer deletion} { + foreach i [after info] { + after cancel $i + } + set x {} + after 100 lappend x 100 + set i [after 300 lappend x 300] + after 200 after cancel $i + after 400 + update + set x +} 100 +test timer-3.4 {TimerHandlerEventProc procedure: all expired timers fire} { + foreach i [after info] { + after cancel $i + } + set x {} + after 100 lappend x a + after 200 lappend x b + after 300 lappend x c + after 300 + vwait x + set x +} {a b c} +test timer-3.5 {TimerHandlerEventProc procedure: reentrantly added timers don't fire} { + foreach i [after info] { + after cancel $i + } + set x {} + after 100 {lappend x a; after 0 lappend x b} + after 100 + vwait x + set x +} a +test timer-3.6 {TimerHandlerEventProc procedure: reentrantly added timers don't fire} { + foreach i [after info] { + after cancel $i + } + set x {} + after 100 {lappend x a; after 100 lappend x b; after 100} + after 100 + vwait x + set result $x + vwait x + lappend result $x +} {a {a b}} + +# No tests for Tcl_DoWhenIdle: it's already tested by other tests +# below. + +test timer-4.1 {Tcl_CancelIdleCall procedure} { + foreach i [after info] { + after cancel $i + } + set x before + set y before + set z before + after idle set x after1 + after idle set y after2 + after idle set z after3 + after cancel set y after2 + update idletasks + concat $x $y $z +} {after1 before after3} +test timer-4.2 {Tcl_CancelIdleCall procedure} { + foreach i [after info] { + after cancel $i + } + set x before + set y before + set z before + after idle set x after1 + after idle set y after2 + after idle set z after3 + after cancel set x after1 + update idletasks + concat $x $y $z +} {before after2 after3} + +test timer-5.1 {Tcl_ServiceIdle, self-rescheduling handlers} { + foreach i [after info] { + after cancel $i + } + set x 1 + set y 23 + after idle {incr x; after idle {incr x; after idle {incr x}}} + after idle {incr y} + vwait x + set result "$x $y" + update idletasks + lappend result $x +} {2 24 4} + +test timer-6.1 {Tcl_AfterCmd procedure, basics} { + list [catch {after} msg] $msg +} {1 {wrong # args: should be "after option ?arg arg ...?"}} +test timer-6.2 {Tcl_AfterCmd procedure, basics} { + list [catch {after 2x} msg] $msg +} {1 {expected integer but got "2x"}} +test timer-6.3 {Tcl_AfterCmd procedure, basics} { + list [catch {after gorp} msg] $msg +} {1 {bad argument "gorp": must be cancel, idle, info, or a number}} +test timer-6.4 {Tcl_AfterCmd procedure, ms argument} { + set x before + after 400 {set x after} + after 200 + update + set y $x + after 400 + update + list $y $x +} {before after} +test timer-6.5 {Tcl_AfterCmd procedure, ms argument} { + set x before + after 300 set x after + after 200 + update + set y $x + after 200 + update + list $y $x +} {before after} +test timer-6.6 {Tcl_AfterCmd procedure, cancel option} { + list [catch {after cancel} msg] $msg +} {1 {wrong # args: should be "after cancel id|command"}} +test timer-6.7 {Tcl_AfterCmd procedure, cancel option} { + after cancel after#1 +} {} +test timer-6.8 {Tcl_AfterCmd procedure, cancel option} { + after cancel {foo bar} +} {} +test timer-6.9 {Tcl_AfterCmd procedure, cancel option} { + foreach i [after info] { + after cancel $i + } + set x before + set y [after 100 set x after] + after cancel $y + after 200 + update + set x +} {before} +test timer-6.10 {Tcl_AfterCmd procedure, cancel option} { + foreach i [after info] { + after cancel $i + } + set x before + after 100 set x after + after cancel {set x after} + after 200 + update + set x +} {before} +test timer-6.11 {Tcl_AfterCmd procedure, cancel option} { + foreach i [after info] { + after cancel $i + } + set x before + after 100 set x after + set id [after 300 set x after] + after cancel $id + after 200 + update + set y $x + set x cleared + after 200 + update + list $y $x +} {after cleared} +test timer-6.12 {Tcl_AfterCmd procedure, cancel option} { + foreach i [after info] { + after cancel $i + } + set x first + after idle lappend x second + after idle lappend x third + set i [after idle lappend x fourth] + after cancel {lappend x second} + after cancel $i + update idletasks + set x +} {first third} +test timer-6.13 {Tcl_AfterCmd procedure, cancel option, multiple arguments for command} { + foreach i [after info] { + after cancel $i + } + set x first + after idle lappend x second + after idle lappend x third + set i [after idle lappend x fourth] + after cancel lappend x second + after cancel $i + update idletasks + set x +} {first third} +test timer-6.14 {Tcl_AfterCmd procedure, cancel option, cancel during handler, used to dump core} { + foreach i [after info] { + after cancel $i + } + set id [ + after 100 { + set x done + after cancel $id + } + ] + vwait x +} {} +test timer-6.15 {Tcl_AfterCmd procedure, cancel option, multiple interps} { + foreach i [after info] { + after cancel $i + } + interp create x + x eval {set a before; set b before; after idle {set a a-after}; + after idle {set b b-after}} + set result [llength [x eval after info]] + lappend result [llength [after info]] + after cancel {set b b-after} + set a aaa + set b bbb + x eval {after cancel set a a-after} + update idletasks + lappend result $a $b [x eval {list $a $b}] + interp delete x + set result +} {2 0 aaa bbb {before b-after}} +test timer-6.16 {Tcl_AfterCmd procedure, idle option} { + list [catch {after idle} msg] $msg +} {1 {wrong # args: should be "after idle script script ..."}} +test timer-6.17 {Tcl_AfterCmd procedure, idle option} { + set x before + after idle {set x after} + set y $x + update idletasks + list $y $x +} {before after} +test timer-6.18 {Tcl_AfterCmd procedure, idle option} { + set x before + after idle set x after + set y $x + update idletasks + list $y $x +} {before after} +set event1 [after idle event 1] +set event2 [after 1000 event 2] +interp create x +set childEvent [x eval {after idle event in child}] +test timer-6.19 {Tcl_AfterCmd, info option} { + lsort [after info] +} [lsort "$event1 $event2"] +test timer-6.20 {Tcl_AfterCmd, info option} { + list [catch {after info a b} msg] $msg +} {1 {wrong # args: should be "after info ?id?"}} +test timer-6.21 {Tcl_AfterCmd, info option} { + list [catch {after info $childEvent} msg] $msg +} "1 {event \"$childEvent\" doesn't exist}" +test timer-6.22 {Tcl_AfterCmd, info option} { + list [after info $event1] [after info $event2] +} {{{event 1} idle} {{event 2} timer}} +after cancel $event1 +after cancel $event2 +interp delete x + +set event [after idle foo bar] +scan $event after#%d id +test timer-7.1 {GetAfterEvent procedure} { + list [catch {after info xfter#$id} msg] $msg +} "1 {event \"xfter#$id\" doesn't exist}" +test timer-7.2 {GetAfterEvent procedure} { + list [catch {after info afterx$id} msg] $msg +} "1 {event \"afterx$id\" doesn't exist}" +test timer-7.3 {GetAfterEvent procedure} { + list [catch {after info after#ab} msg] $msg +} {1 {event "after#ab" doesn't exist}} +test timer-7.4 {GetAfterEvent procedure} { + list [catch {after info after#} msg] $msg +} {1 {event "after#" doesn't exist}} +test timer-7.5 {GetAfterEvent procedure} { + list [catch {after info after#${id}x} msg] $msg +} "1 {event \"after#${id}x\" doesn't exist}" +test timer-7.6 {GetAfterEvent procedure} { + list [catch {after info afterx[expr $id+1]} msg] $msg +} "1 {event \"afterx[expr $id+1]\" doesn't exist}" +after cancel $event + +test timer-8.1 {AfterProc procedure} { + set x before + proc foo {} { + set x untouched + after 100 {set x after} + after 200 + update + return $x + } + list [foo] $x +} {untouched after} +test timer-8.2 {AfterProc procedure} { + catch {rename bgerror {}} + proc bgerror msg { + global x errorInfo + set x [list $msg $errorInfo] + } + set x empty + after 100 {error "After error"} + after 200 + set y $x + update + catch {rename bgerror {}} + list $y $x +} {empty {{After error} {After error + while executing +"error "After error"" + ("after" script)}}} +test timer-8.3 {AfterProc procedure, deleting handler from itself} { + foreach i [after info] { + after cancel $i + } + proc foo {} { + global x + set x {} + foreach i [after info] { + lappend x [after info $i] + } + after cancel foo + } + after idle foo + after 1000 {error "I shouldn't ever have executed"} + update idletasks + set x +} {{{error "I shouldn't ever have executed"} timer}} +test timer-8.4 {AfterProc procedure, deleting handler from itself} { + foreach i [after info] { + after cancel $i + } + proc foo {} { + global x + set x {} + foreach i [after info] { + lappend x [after info $i] + } + after cancel foo + } + after 1000 {error "I shouldn't ever have executed"} + after idle foo + update idletasks + set x +} {{{error "I shouldn't ever have executed"} timer}} + +foreach i [after info] { + after cancel $i +} + +# No test for FreeAfterPtr, since it is already tested above. + + +test timer-9.1 {AfterCleanupProc procedure} { + catch {interp delete x} + interp create x + x eval {after 200 { + lappend x after + puts "part 1: this message should not appear" + }} + after 200 {lappend x after2} + x eval {after 200 { + lappend x after3 + puts "part 2: this message should not appear" + }} + after 200 {lappend x after4} + x eval {after 200 { + lappend x after5 + puts "part 3: this message should not appear" + }} + interp delete x + set x before + after 300 + update + set x +} {before after2 after4} + diff --git a/tests/trace.test b/tests/trace.test new file mode 100644 index 0000000..b4d02d3 --- /dev/null +++ b/tests/trace.test @@ -0,0 +1,966 @@ +# Commands covered: trace +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) trace.test 1.27 97/07/23 17:08:38 + +if {[string compare test [info procs test]] == 1} then {source defs} + +proc traceScalar {name1 name2 op} { + global info + set info [list $name1 $name2 $op [catch {uplevel set $name1} msg] $msg] +} +proc traceScalarAppend {name1 name2 op} { + global info + lappend info $name1 $name2 $op [catch {uplevel set $name1} msg] $msg +} +proc traceArray {name1 name2 op} { + global info + set info [list $name1 $name2 $op [catch {uplevel set [set name1]($name2)} msg] $msg] +} +proc traceArray2 {name1 name2 op} { + global info + set info [list $name1 $name2 $op] +} +proc traceProc {name1 name2 op} { + global info + set info [concat $info [list $name1 $name2 $op]] +} +proc traceTag {tag args} { + global info + set info [concat $info $tag] +} +proc traceError {args} { + error "trace returned error" +} +proc traceCheck {cmd args} { + global info + set info [list [catch $cmd msg] $msg] +} +proc traceCrtElement {value name1 name2 op} { + uplevel set ${name1}($name2) $value +} + +# Read-tracing on variables + +test trace-1.1 {trace variable reads} { + catch {unset x} + set info {} + trace var x r traceScalar + list [catch {set x} msg] $msg $info +} {1 {can't read "x": no such variable} {x {} r 1 {can't read "x": no such variable}}} +test trace-1.2 {trace variable reads} { + catch {unset x} + set x 123 + set info {} + trace var x r traceScalar + list [catch {set x} msg] $msg $info +} {0 123 {x {} r 0 123}} +test trace-1.3 {trace variable reads} { + catch {unset x} + set info {} + trace var x r traceScalar + set x 123 + set info +} {} +test trace-1.4 {trace array element reads} { + catch {unset x} + set info {} + trace var x(2) r traceArray + list [catch {set x(2)} msg] $msg $info +} {1 {can't read "x(2)": no such element in array} {x 2 r 1 {can't read "x(2)": no such element in array}}} +test trace-1.5 {trace array element reads} { + catch {unset x} + set x(2) zzz + set info {} + trace var x(2) r traceArray + list [catch {set x(2)} msg] $msg $info +} {0 zzz {x 2 r 0 zzz}} +test trace-1.6 {trace array element reads} { + catch {unset x} + set info {} + trace variable x r traceArray2 + proc p {} { + global x + set x(2) willi + return $x(2) + } + list [catch {p} msg] $msg $info +} {0 willi {x 2 r}} +test trace-1.7 {trace array element reads, create element undefined if nonexistant} { + catch {unset x} + set info {} + trace variable x r q + proc q {name1 name2 op} { + global info + set info [list $name1 $name2 $op] + global $name1 + set ${name1}($name2) wolf + } + proc p {} { + global x + set x(X) willi + return $x(Y) + } + list [catch {p} msg] $msg $info +} {0 wolf {x Y r}} +test trace-1.8 {trace reads on whole arrays} { + catch {unset x} + set info {} + trace var x r traceArray + list [catch {set x(2)} msg] $msg $info +} {1 {can't read "x(2)": no such variable} {}} +test trace-1.9 {trace reads on whole arrays} { + catch {unset x} + set x(2) zzz + set info {} + trace var x r traceArray + list [catch {set x(2)} msg] $msg $info +} {0 zzz {x 2 r 0 zzz}} +test trace-1.10 {trace variable reads} { + catch {unset x} + set x 444 + set info {} + trace var x r traceScalar + unset x + set info +} {} + +# Basic write-tracing on variables + +test trace-2.1 {trace variable writes} { + catch {unset x} + set info {} + trace var x w traceScalar + set x 123 + set info +} {x {} w 0 123} +test trace-2.2 {trace writes to array elements} { + catch {unset x} + set info {} + trace var x(33) w traceArray + set x(33) 444 + set info +} {x 33 w 0 444} +test trace-2.3 {trace writes on whole arrays} { + catch {unset x} + set info {} + trace var x w traceArray + set x(abc) qq + set info +} {x abc w 0 qq} +test trace-2.4 {trace variable writes} { + catch {unset x} + set x 1234 + set info {} + trace var x w traceScalar + set x + set info +} {} +test trace-2.5 {trace variable writes} { + catch {unset x} + set x 1234 + set info {} + trace var x w traceScalar + unset x + set info +} {} + +# append no longer triggers read traces when fetching the old values of +# variables before doing the append operation. However, lappend _does_ +# still trigger these read traces. Also lappend triggers only one write +# trace: after appending all arguments to the list. + +test trace-3.1 {trace variable read-modify-writes} { + catch {unset x} + set info {} + trace var x r traceScalarAppend + append x 123 + append x 456 + lappend x 789 + set info +} {x {} r 0 123456} +test trace-3.2 {trace variable read-modify-writes} { + catch {unset x} + set info {} + trace var x rw traceScalarAppend + append x 123 + lappend x 456 + set info +} {x {} w 0 123 x {} r 0 123 x {} w 0 {123 456}} + +# Basic unset-tracing on variables + +test trace-4.1 {trace variable unsets} { + catch {unset x} + set info {} + trace var x u traceScalar + catch {unset x} + set info +} {x {} u 1 {can't read "x": no such variable}} +test trace-4.2 {variable mustn't exist during unset trace} { + catch {unset x} + set x 1234 + set info {} + trace var x u traceScalar + unset x + set info +} {x {} u 1 {can't read "x": no such variable}} +test trace-4.3 {unset traces mustn't be called during reads and writes} { + catch {unset x} + set info {} + trace var x u traceScalar + set x 44 + set x + set info +} {} +test trace-4.4 {trace unsets on array elements} { + catch {unset x} + set x(0) 18 + set info {} + trace var x(1) u traceArray + catch {unset x(1)} + set info +} {x 1 u 1 {can't read "x(1)": no such element in array}} +test trace-4.5 {trace unsets on array elements} { + catch {unset x} + set x(1) 18 + set info {} + trace var x(1) u traceArray + unset x(1) + set info +} {x 1 u 1 {can't read "x(1)": no such element in array}} +test trace-4.6 {trace unsets on array elements} { + catch {unset x} + set x(1) 18 + set info {} + trace var x(1) u traceArray + unset x + set info +} {x 1 u 1 {can't read "x(1)": no such variable}} +test trace-4.7 {trace unsets on whole arrays} { + catch {unset x} + set x(1) 18 + set info {} + trace var x u traceProc + catch {unset x(0)} + set info +} {} +test trace-4.8 {trace unsets on whole arrays} { + catch {unset x} + set x(1) 18 + set x(2) 144 + set x(3) 14 + set info {} + trace var x u traceProc + unset x(1) + set info +} {x 1 u} +test trace-4.9 {trace unsets on whole arrays} { + catch {unset x} + set x(1) 18 + set x(2) 144 + set x(3) 14 + set info {} + trace var x u traceProc + unset x + set info +} {x {} u} + +# Trace multiple trace types at once. + +test trace-5.1 {multiple ops traced at once} { + catch {unset x} + set info {} + trace var x rwu traceProc + catch {set x} + set x 22 + set x + set x 33 + unset x + set info +} {x {} r x {} w x {} r x {} w x {} u} +test trace-5.2 {multiple ops traced on array element} { + catch {unset x} + set info {} + trace var x(0) rwu traceProc + catch {set x(0)} + set x(0) 22 + set x(0) + set x(0) 33 + unset x(0) + unset x + set info +} {x 0 r x 0 w x 0 r x 0 w x 0 u} +test trace-5.3 {multiple ops traced on whole array} { + catch {unset x} + set info {} + trace var x rwu traceProc + catch {set x(0)} + set x(0) 22 + set x(0) + set x(0) 33 + unset x(0) + unset x + set info +} {x 0 w x 0 r x 0 w x 0 u x {} u} + +# Check order of invocation of traces + +test trace-6.1 {order of invocation of traces} { + catch {unset x} + set info {} + trace var x r "traceTag 1" + trace var x r "traceTag 2" + trace var x r "traceTag 3" + catch {set x} + set x 22 + set x + set info +} {3 2 1 3 2 1} +test trace-6.2 {order of invocation of traces} { + catch {unset x} + set x(0) 44 + set info {} + trace var x(0) r "traceTag 1" + trace var x(0) r "traceTag 2" + trace var x(0) r "traceTag 3" + set x(0) + set info +} {3 2 1} +test trace-6.3 {order of invocation of traces} { + catch {unset x} + set x(0) 44 + set info {} + trace var x(0) r "traceTag 1" + trace var x r "traceTag A1" + trace var x(0) r "traceTag 2" + trace var x r "traceTag A2" + trace var x(0) r "traceTag 3" + trace var x r "traceTag A3" + set x(0) + set info +} {A3 A2 A1 3 2 1} + +# Check effects of errors in trace procedures + +test trace-7.1 {error returns from traces} { + catch {unset x} + set x 123 + set info {} + trace var x r "traceTag 1" + trace var x r traceError + list [catch {set x} msg] $msg $info +} {1 {can't read "x": trace returned error} {}} +test trace-7.2 {error returns from traces} { + catch {unset x} + set x 123 + set info {} + trace var x w "traceTag 1" + trace var x w traceError + list [catch {set x 44} msg] $msg $info +} {1 {can't set "x": trace returned error} {}} +test trace-7.3 {error returns from traces} { + catch {unset x} + set x 123 + set info {} + trace var x w traceError + list [catch {append x 44} msg] $msg $info +} {1 {can't set "x": trace returned error} {}} +test trace-7.4 {error returns from traces} { + catch {unset x} + set x 123 + set info {} + trace var x u "traceTag 1" + trace var x u traceError + list [catch {unset x} msg] $msg $info +} {0 {} 1} +test trace-7.5 {error returns from traces} { + catch {unset x} + set x(0) 123 + set info {} + trace var x(0) r "traceTag 1" + trace var x r "traceTag 2" + trace var x r traceError + trace var x r "traceTag 3" + list [catch {set x(0)} msg] $msg $info +} {1 {can't read "x(0)": trace returned error} 3} +test trace-7.6 {error returns from traces} { + catch {unset x} + set x 123 + trace var x u traceError + list [catch {unset x} msg] $msg +} {0 {}} +test trace-7.7 {error returns from traces} { + # This test just makes sure that the memory for the error message + # gets deallocated correctly when the trace is invoked again or + # when the trace is deleted. + catch {unset x} + set x 123 + trace var x r traceError + catch {set x} + catch {set x} + trace vdelete x r traceError +} {} + +# Check to see that variables are expunged before trace +# procedures are invoked, so trace procedure can even manipulate +# a new copy of the variables. + +test trace-8.1 {be sure variable is unset before trace is called} { + catch {unset x} + set x 33 + set info {} + trace var x u {traceCheck {uplevel set x}} + unset x + set info +} {1 {can't read "x": no such variable}} +test trace-8.2 {be sure variable is unset before trace is called} { + catch {unset x} + set x 33 + set info {} + trace var x u {traceCheck {uplevel set x 22}} + unset x + concat $info [list [catch {set x} msg] $msg] +} {0 22 0 22} +test trace-8.3 {be sure traces are cleared before unset trace called} { + catch {unset x} + set x 33 + set info {} + trace var x u {traceCheck {uplevel trace vinfo x}} + unset x + set info +} {0 {}} +test trace-8.4 {set new trace during unset trace} { + catch {unset x} + set x 33 + set info {} + trace var x u {traceCheck {global x; trace var x u traceProc}} + unset x + concat $info [trace vinfo x] +} {0 {} {u traceProc}} + +test trace-9.1 {make sure array elements are unset before traces are called} { + catch {unset x} + set x(0) 33 + set info {} + trace var x(0) u {traceCheck {uplevel set x(0)}} + unset x(0) + set info +} {1 {can't read "x(0)": no such element in array}} +test trace-9.2 {make sure array elements are unset before traces are called} { + catch {unset x} + set x(0) 33 + set info {} + trace var x(0) u {traceCheck {uplevel set x(0) zzz}} + unset x(0) + concat $info [list [catch {set x(0)} msg] $msg] +} {0 zzz 0 zzz} +test trace-9.3 {array elements are unset before traces are called} { + catch {unset x} + set x(0) 33 + set info {} + trace var x(0) u {traceCheck {global x; trace vinfo x(0)}} + unset x(0) + set info +} {0 {}} +test trace-9.4 {set new array element trace during unset trace} { + catch {unset x} + set x(0) 33 + set info {} + trace var x(0) u {traceCheck {uplevel {trace variable x(0) r {}}}} + catch {unset x(0)} + concat $info [trace vinfo x(0)] +} {0 {} {r {}}} + +test trace-10.1 {make sure arrays are unset before traces are called} { + catch {unset x} + set x(0) 33 + set info {} + trace var x u {traceCheck {uplevel set x(0)}} + unset x + set info +} {1 {can't read "x(0)": no such variable}} +test trace-10.2 {make sure arrays are unset before traces are called} { + catch {unset x} + set x(y) 33 + set info {} + trace var x u {traceCheck {uplevel set x(y) 22}} + unset x + concat $info [list [catch {set x(y)} msg] $msg] +} {0 22 0 22} +test trace-10.3 {make sure arrays are unset before traces are called} { + catch {unset x} + set x(y) 33 + set info {} + trace var x u {traceCheck {uplevel array exists x}} + unset x + set info +} {0 0} +test trace-10.4 {make sure arrays are unset before traces are called} { + catch {unset x} + set x(y) 33 + set info {} + set cmd {traceCheck {uplevel {trace vinfo x}}} + trace var x u $cmd + unset x + set info +} {0 {}} +test trace-10.5 {set new array trace during unset trace} { + catch {unset x} + set x(y) 33 + set info {} + trace var x u {traceCheck {global x; trace var x r {}}} + unset x + concat $info [trace vinfo x] +} {0 {} {r {}}} +test trace-10.6 {create scalar during array unset trace} { + catch {unset x} + set x(y) 33 + set info {} + trace var x u {traceCheck {global x; set x 44}} + unset x + concat $info [list [catch {set x} msg] $msg] +} {0 44 0 44} + +# Check special conditions (e.g. errors) in Tcl_TraceVar2. + +test trace-11.1 {creating array when setting variable traces} { + catch {unset x} + set info {} + trace var x(0) w traceProc + list [catch {set x 22} msg] $msg +} {1 {can't set "x": variable is array}} +test trace-11.2 {creating array when setting variable traces} { + catch {unset x} + set info {} + trace var x(0) w traceProc + list [catch {set x(0)} msg] $msg +} {1 {can't read "x(0)": no such element in array}} +test trace-11.3 {creating array when setting variable traces} { + catch {unset x} + set info {} + trace var x(0) w traceProc + set x(0) 22 + set info +} {x 0 w} +test trace-11.4 {creating variable when setting variable traces} { + catch {unset x} + set info {} + trace var x w traceProc + list [catch {set x} msg] $msg +} {1 {can't read "x": no such variable}} +test trace-11.5 {creating variable when setting variable traces} { + catch {unset x} + set info {} + trace var x w traceProc + set x 22 + set info +} {x {} w} +test trace-11.6 {creating variable when setting variable traces} { + catch {unset x} + set info {} + trace var x w traceProc + set x(0) 22 + set info +} {x 0 w} +test trace-11.7 {create array element during read trace} { + catch {unset x} + set x(2) zzz + trace var x r {traceCrtElement xyzzy} + list [catch {set x(3)} msg] $msg +} {0 xyzzy} +test trace-11.8 {errors when setting variable traces} { + catch {unset x} + set x 44 + list [catch {trace var x(0) w traceProc} msg] $msg +} {1 {can't trace "x(0)": variable isn't array}} + +# Check deleting one trace from another. + +test trace-12.1 {delete one trace from another} { + proc delTraces {args} { + global x + trace vdel x r {traceTag 2} + trace vdel x r {traceTag 3} + trace vdel x r {traceTag 4} + } + catch {unset x} + set x 44 + set info {} + trace var x r {traceTag 1} + trace var x r {traceTag 2} + trace var x r {traceTag 3} + trace var x r {traceTag 4} + trace var x r delTraces + trace var x r {traceTag 5} + set x + set info +} {5 1} + +# Check operation and syntax of "trace" command. + +test trace-13.1 {trace command (overall)} { + list [catch {trace} msg] $msg +} {1 {too few args: should be "trace option [arg arg ...]"}} +test trace-13.2 {trace command (overall)} { + list [catch {trace gorp} msg] $msg +} {1 {bad option "gorp": should be variable, vdelete, or vinfo}} +test trace-13.3 {trace command ("variable" option)} { + list [catch {trace variable x y} msg] $msg +} {1 {wrong # args: should be "trace variable name ops command"}} +test trace-13.4 {trace command ("variable" option)} { + list [catch {trace var x y z z2} msg] $msg +} {1 {wrong # args: should be "trace variable name ops command"}} +test trace-13.5 {trace command ("variable" option)} { + list [catch {trace var x y z} msg] $msg +} {1 {bad operations "y": should be one or more of rwu}} +test trace-13.6 {trace command ("vdelete" option)} { + list [catch {trace vdelete x y} msg] $msg +} {1 {wrong # args: should be "trace vdelete name ops command"}} +test trace-13.7 {trace command ("vdelete" option)} { + list [catch {trace vdelete x y z foo} msg] $msg +} {1 {wrong # args: should be "trace vdelete name ops command"}} +test trace-13.8 {trace command ("vdelete" option)} { + list [catch {trace vdelete x y z} msg] $msg +} {1 {bad operations "y": should be one or more of rwu}} +test trace-13.9 {trace command ("vdelete" option)} { + catch {unset x} + set info {} + trace var x w traceProc + trace vdelete x w traceProc +} {} +test trace-13.10 {trace command ("vdelete" option)} { + catch {unset x} + set info {} + trace var x w traceProc + trace vdelete x w traceProc + set x 12345 + set info +} {} +test trace-13.11 {trace command ("vdelete" option)} { + catch {unset x} + set info {} + trace var x w {traceTag 1} + trace var x w traceProc + trace var x w {traceTag 2} + set x yy + trace vdelete x w traceProc + set x 12345 + trace vdelete x w {traceTag 1} + set x foo + trace vdelete x w {traceTag 2} + set x gorp + set info +} {2 x {} w 1 2 1 2} +test trace-13.12 {trace command ("vdelete" option)} { + catch {unset x} + set info {} + trace var x w {traceTag 1} + trace vdelete x w non_existent + set x 12345 + set info +} {1} +test trace-13.13 {trace command ("vinfo" option)} { + list [catch {trace vinfo} msg] $msg] +} {1 {wrong # args: should be "trace vinfo name"]}} +test trace-13.14 {trace command ("vinfo" option)} { + list [catch {trace vinfo x y} msg] $msg] +} {1 {wrong # args: should be "trace vinfo name"]}} +test trace-13.15 {trace command ("vinfo" option)} { + catch {unset x} + trace var x w {traceTag 1} + trace var x w traceProc + trace var x w {traceTag 2} + trace vinfo x +} {{w {traceTag 2}} {w traceProc} {w {traceTag 1}}} +test trace-13.16 {trace command ("vinfo" option)} { + catch {unset x} + trace vinfo x +} {} +test trace-13.17 {trace command ("vinfo" option)} { + catch {unset x} + trace vinfo x(0) +} {} +test trace-13.18 {trace command ("vinfo" option)} { + catch {unset x} + set x 44 + trace vinfo x(0) +} {} +test trace-13.19 {trace command ("vinfo" option)} { + catch {unset x} + set x 44 + trace var x w {traceTag 1} + proc check {} {global x; trace vinfo x} + check +} {{w {traceTag 1}}} + +# Check fancy trace commands (long ones, weird arguments, etc.) + +test trace-14.1 {long trace command} { + catch {unset x} + set info {} + trace var x w {traceTag {This is a very very long argument. It's \ + designed to test out the facilities of TraceVarProc for dealing \ + with such long arguments by malloc-ing space. One possibility \ + is that space doesn't get freed properly. If this happens, then \ + invoking this test over and over again will eventually leak memory.}} + set x 44 + set info +} {This is a very very long argument. It's \ + designed to test out the facilities of TraceVarProc for dealing \ + with such long arguments by malloc-ing space. One possibility \ + is that space doesn't get freed properly. If this happens, then \ + invoking this test over and over again will eventually leak memory.} +test trace-14.2 {long trace command result to ignore} { + proc longResult {args} {return "quite a bit of text, designed to + generate a core leak if this command file is invoked over and over again + and memory isn't being recycled correctly"} + catch {unset x} + trace var x w longResult + set x 44 + set x 5 + set x abcde +} abcde +test trace-14.3 {special list-handling in trace commands} { + catch {unset "x y z"} + set "x y z(a\n\{)" 44 + set info {} + trace var "x y z(a\n\{)" w traceProc + set "x y z(a\n\{)" 33 + set info +} "{x y z} a\\n\\{ w" + +# Check for proper handling of unsets during traces. + +proc traceUnset {unsetName args} { + global info + upvar $unsetName x + lappend info [catch {unset x} msg] $msg [catch {set x} msg] $msg +} +proc traceReset {unsetName resetName args} { + global info + upvar $unsetName x $resetName y + lappend info [catch {unset x} msg] $msg [catch {set y xyzzy} msg] $msg +} +proc traceReset2 {unsetName resetName args} { + global info + lappend info [catch {uplevel unset $unsetName} msg] $msg \ + [catch {uplevel set $resetName xyzzy} msg] $msg +} +proc traceAppend {string name1 name2 op} { + global info + lappend info $string +} + +test trace-15.1 {unsets during read traces} { + catch {unset y} + set y 1234 + set info {} + trace var y r {traceUnset y} + trace var y u {traceAppend unset} + lappend info [catch {set y} msg] $msg +} {unset 0 {} 1 {can't read "x": no such variable} 1 {can't read "y": no such variable}} +test trace-15.2 {unsets during read traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) r {traceUnset y(0)} + lappend info [catch {set y(0)} msg] $msg +} {0 {} 1 {can't read "x": no such variable} 1 {can't read "y(0)": no such element in array}} +test trace-15.3 {unsets during read traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) r {traceUnset y} + lappend info [catch {set y(0)} msg] $msg +} {0 {} 1 {can't read "x": no such variable} 1 {can't read "y(0)": no such variable}} +test trace-15.4 {unsets during read traces} { + catch {unset y} + set y 1234 + set info {} + trace var y r {traceReset y y} + lappend info [catch {set y} msg] $msg +} {0 {} 0 xyzzy 0 xyzzy} +test trace-15.5 {unsets during read traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) r {traceReset y(0) y(0)} + lappend info [catch {set y(0)} msg] $msg +} {0 {} 0 xyzzy 0 xyzzy} +test trace-15.6 {unsets during read traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) r {traceReset y y(0)} + lappend info [catch {set y(0)} msg] $msg [catch {set y(0)} msg] $msg +} {0 {} 1 {can't set "y": upvar refers to element in deleted array} 1 {can't read "y(0)": no such variable} 1 {can't read "y(0)": no such variable}} +test trace-15.7 {unsets during read traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) r {traceReset2 y y(0)} + lappend info [catch {set y(0)} msg] $msg [catch {set y(0)} msg] $msg +} {0 {} 0 xyzzy 1 {can't read "y(0)": no such element in array} 0 xyzzy} +test trace-15.8 {unsets during write traces} { + catch {unset y} + set y 1234 + set info {} + trace var y w {traceUnset y} + trace var y u {traceAppend unset} + lappend info [catch {set y xxx} msg] $msg +} {unset 0 {} 1 {can't read "x": no such variable} 0 {}} +test trace-15.9 {unsets during write traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) w {traceUnset y(0)} + lappend info [catch {set y(0) xxx} msg] $msg +} {0 {} 1 {can't read "x": no such variable} 0 {}} +test trace-15.10 {unsets during write traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) w {traceUnset y} + lappend info [catch {set y(0) xxx} msg] $msg +} {0 {} 1 {can't read "x": no such variable} 0 {}} +test trace-15.11 {unsets during write traces} { + catch {unset y} + set y 1234 + set info {} + trace var y w {traceReset y y} + lappend info [catch {set y xxx} msg] $msg +} {0 {} 0 xyzzy 0 xyzzy} +test trace-15.12 {unsets during write traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) w {traceReset y(0) y(0)} + lappend info [catch {set y(0) xxx} msg] $msg +} {0 {} 0 xyzzy 0 xyzzy} +test trace-15.13 {unsets during write traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) w {traceReset y y(0)} + lappend info [catch {set y(0) xxx} msg] $msg [catch {set y(0)} msg] $msg +} {0 {} 1 {can't set "y": upvar refers to element in deleted array} 0 {} 1 {can't read "y(0)": no such variable}} +test trace-15.14 {unsets during write traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) w {traceReset2 y y(0)} + lappend info [catch {set y(0) xxx} msg] $msg [catch {set y(0)} msg] $msg +} {0 {} 0 xyzzy 0 {} 0 xyzzy} +test trace-15.15 {unsets during unset traces} { + catch {unset y} + set y 1234 + set info {} + trace var y u {traceUnset y} + lappend info [catch {unset y} msg] $msg [catch {set y} msg] $msg +} {1 {can't unset "x": no such variable} 1 {can't read "x": no such variable} 0 {} 1 {can't read "y": no such variable}} +test trace-15.16 {unsets during unset traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) u {traceUnset y(0)} + lappend info [catch {unset y(0)} msg] $msg [catch {set y(0)} msg] $msg +} {1 {can't unset "x": no such variable} 1 {can't read "x": no such variable} 0 {} 1 {can't read "y(0)": no such element in array}} +test trace-15.17 {unsets during unset traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) u {traceUnset y} + lappend info [catch {unset y(0)} msg] $msg [catch {set y(0)} msg] $msg +} {0 {} 1 {can't read "x": no such variable} 0 {} 1 {can't read "y(0)": no such variable}} +test trace-15.18 {unsets during unset traces} { + catch {unset y} + set y 1234 + set info {} + trace var y u {traceReset2 y y} + lappend info [catch {unset y} msg] $msg [catch {set y} msg] $msg +} {1 {can't unset "y": no such variable} 0 xyzzy 0 {} 0 xyzzy} +test trace-15.19 {unsets during unset traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) u {traceReset2 y(0) y(0)} + lappend info [catch {unset y(0)} msg] $msg [catch {set y(0)} msg] $msg +} {1 {can't unset "y(0)": no such element in array} 0 xyzzy 0 {} 0 xyzzy} +test trace-15.20 {unsets during unset traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) u {traceReset2 y y(0)} + lappend info [catch {unset y(0)} msg] $msg [catch {set y(0)} msg] $msg +} {0 {} 0 xyzzy 0 {} 0 xyzzy} +test trace-15.21 {unsets cancelling traces} { + catch {unset y} + set y 1234 + set info {} + trace var y r {traceAppend first} + trace var y r {traceUnset y} + trace var y r {traceAppend third} + trace var y u {traceAppend unset} + lappend info [catch {set y} msg] $msg +} {third unset 0 {} 1 {can't read "x": no such variable} 1 {can't read "y": no such variable}} +test trace-15.22 {unsets cancelling traces} { + catch {unset y} + set y(0) 1234 + set info {} + trace var y(0) r {traceAppend first} + trace var y(0) r {traceUnset y} + trace var y(0) r {traceAppend third} + trace var y(0) u {traceAppend unset} + lappend info [catch {set y(0)} msg] $msg +} {third unset 0 {} 1 {can't read "x": no such variable} 1 {can't read "y(0)": no such variable}} + +# Check various non-interference between traces and other things. + +test trace-16.1 {trace doesn't prevent unset errors} { + catch {unset x} + set info {} + trace var x u {traceProc} + list [catch {unset x} msg] $msg $info +} {1 {can't unset "x": no such variable} {x {} u}} +test trace-16.2 {traced variables must survive procedure exits} { + catch {unset x} + proc p1 {} {global x; trace var x w traceProc} + p1 + trace vinfo x +} {{w traceProc}} +test trace-16.3 {traced variables must survive procedure exits} { + catch {unset x} + set info {} + proc p1 {} {global x; trace var x w traceProc} + p1 + set x 44 + set info +} {x {} w} + +# Be sure that procedure frames are released before unset traces +# are invoked. + +test trace-17.1 {unset traces on procedure returns} { + proc p1 {x y} {set a 44; p2 14} + proc p2 {z} {trace var z u {traceCheck {lsort [uplevel {info vars}]}}} + set info {} + p1 foo bar + set info +} {0 {a x y}} + +# Delete arrays when done, so they can be re-used as scalars +# elsewhere. + +catch {unset x} +catch {unset y} +concat {} diff --git a/tests/unixFCmd.test b/tests/unixFCmd.test new file mode 100644 index 0000000..037b5b4 --- /dev/null +++ b/tests/unixFCmd.test @@ -0,0 +1,251 @@ +# This file tests the tclUnixFCmd.c file. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) unixFCmd.test 1.15 97/11/03 15:58:22 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {$tcl_platform(platform) != "unix"} { + return +} + +if {$user == "root"} { + puts "Skipping unixFCmd tests. They depend on not being able to write to" + puts "certain directories. It would be too dangerous to run them as root." + return +} + +proc openup {path} { + testchmod 777 $path + if {[file isdirectory $path]} { + catch { + foreach p [glob [file join $path *]] { + openup $p + } + } + } +} + +proc cleanup {args} { + foreach p ". $args" { + set x "" + catch { + set x [glob [file join $p tf*] [file join $p td*]] + } + foreach file $x { + if {[catch {file delete -force -- $file}]} { + openup $file + file delete -force -- $file + } + } + } +} + +test unixFCmd-1.1 {TclpRenameFile: EACCES} { + cleanup + file mkdir td1/td2/td3 + exec chmod 000 td1/td2 + set msg [list [catch {file rename td1/td2/td3 td2} msg] $msg] + exec chmod 755 td1/td2 + set msg +} {1 {error renaming "td1/td2/td3": permission denied}} +test unixFCmd-1.2 {TclpRenameFile: EEXIST} { + cleanup + file mkdir td1/td2 + file mkdir td2 + list [catch {file rename td2 td1} msg] $msg +} {1 {error renaming "td2" to "td1/td2": file already exists}} +test unixFCmd-1.3 {TclpRenameFile: EINVAL} { + cleanup + file mkdir td1 + list [catch {file rename td1 td1} msg] $msg +} {1 {error renaming "td1" to "td1/td1": trying to rename a volume or move a directory into itself}} +test unixFCmd-1.4 {TclpRenameFile: EISDIR} { + # can't make it happen +} {} +test unixFCmd-1.5 {TclpRenameFile: ENOENT} { + cleanup + file mkdir td1 + list [catch {file rename td2 td1} msg] $msg +} {1 {error renaming "td2": no such file or directory}} +test unixFCmd-1.6 {TclpRenameFile: ENOTDIR} { + # can't make it happen +} {} +test unixFCmd-1.7 {TclpRenameFile: EXDEV} { + cleanup + file mkdir foo/bar + file attr foo -perm 040555 + set msg [list [catch {file rename foo/bar /tmp} msg] $msg] + set a1 {1 {can't unlink "foo/bar": permission denied}} + set result [expr {$msg == $a1}] + catch {file delete /tmp/bar} + catch {file attr foo -perm 040777} + catch {file delete -force foo} + set result +} {1} + +test unixFCmd-2.1 {TclpCopyFile: target exists: lstat(dst) == 0} { + cleanup + exec touch tf1 + exec touch tf2 + file copy -force tf1 tf2 +} {} +test unixFCmd-2.2 {TclpCopyFile: src is symlink} { + cleanup + exec ln -s tf1 tf2 + file copy tf2 tf3 + file type tf3 +} {link} +test unixFCmd-2.3 {TclpCopyFile: src is block} { + cleanup + set null "/dev/null" + while {[file type $null] != "characterSpecial"} { + set null [file join [file dirname $null] [file readlink $null]] + } + # file copy $null tf1 +} {} +test unixFCmd-2.4 {TclpCopyFile: src is fifo} { + cleanup + if [catch {exec mknod tf1 p}] { + list 1 + } else { + file copy tf1 tf2 + expr {"[file type tf1]" == "[file type tf2]"} + } +} {1} +test unixFCmd-2.5 {TclpCopyFile: copy attributes} { + cleanup + exec touch tf1 + exec chmod 472 tf1 + file copy tf1 tf2 + string range [exec ls -l tf2] 0 9 +} {-r--rwx-w-} + +test unixFCmd-3.1 {CopyFile not done} { +} {} + +test unixFCmd-4.1 {TclpDeleteFile not done} { +} {} + +test unixFCmd-5.1 {TclpCreateDirectory not done} { +} {} + +test unixFCmd-6.1 {TclpCopyDirectory not done} { +} {} + +test unixFCmd-7.1 {TclpRemoveDirectory not done} { +} {} + +test unixFCmd-8.1 {TraverseUnixTree not done} { +} {} + +test unixFCmd-9.1 {TraversalCopy not done} { +} {} + +test unixFCmd-10.1 {TraversalDelete not done} { +} {} + +test unixFCmd-11.1 {CopyFileAttrs not done} { +} {} + +set testConfig(tclGroup) 0 +if {[catch {exec {groups}} groupList] == 0} { + if {[lsearch $groupList tcl] != -1} { + set testConfig(tclGroup) 1 + } +} + +test unixFCmd-12.1 {GetGroupAttribute - file not found} { + catch {file delete -force -- foo.test} + list [catch {file attributes foo.test -group} msg] $msg +} {1 {could not stat file "foo.test": no such file or directory}} +test unixFCmd-12.2 {GetGroupAttribute - file found} { + catch {file delete -force -- foo.test} + close [open foo.test w] + list [catch {file attributes foo.test -group}] [file delete -force -- foo.test] +} {0 {}} + +test unixFCmd-13.1 {GetOwnerAttribute - file not found} { + catch {file delete -force -- foo.test} + list [catch {file attributes foo.test -group} msg] $msg +} {1 {could not stat file "foo.test": no such file or directory}} +test unixFCmd-13.2 {GetOwnerAttribute} { + catch {file delete -force -- foo.test} + close [open foo.test w] + list [catch {file attributes foo.test -owner} msg] [string compare $msg $user] [file delete -force -- foo.test] +} {0 0 {}} + +test unixFCmd-14.1 {GetPermissionsAttribute - file not found} { + catch {file delete -force -- foo.test} + list [catch {file attributes foo.test -permissions} msg] $msg +} {1 {could not stat file "foo.test": no such file or directory}} +test unixFCmd-14.2 {GetPermissionsAttribute} { + catch {file delete -force -- foo.test} + close [open foo.test w] + list [catch {file attribute foo.test -permissions}] [file delete -force -- foo.test] +} {0 {}} + +#groups hard to test +test unixFCmd-15.1 {SetGroupAttribute - invalid group} { + catch {file delete -force -- foo.test} + list [catch {file attributes foo.test -group foozzz} msg] $msg [file delete -force -- foo.test] +} {1 {could not set group for file "foo.test": group "foozzz" does not exist} {}} +test unixFCmd-15.2 {SetGroupAttribute - invalid file} {tclGroup} { + catch {file delete -force -- foo.test} + list [catch {file attributes foo.test -group tcl} msg] $msg +} {1 {could not set group for file "foo.test": no such file or directory}} + +#changing owners hard to do +test unixFCmd-16.1 {SetOwnerAttribute - current owner} { + catch {file delete -force -- foo.test} + close [open foo.test w] + list [catch {file attributes foo.test -owner $user} msg] $msg [string compare [file attributes foo.test -owner] $user] [file delete -force -- foo.test] +} {0 {} 0 {}} +test unixFCmd-16.2 {SetOwnerAttribute - invalid file} { + catch {file delete -force -- foo.test} + list [catch {file attributes foo.test -owner $user} msg] $msg +} {1 {could not set owner for file "foo.test": no such file or directory}} +test unixFCmd-16.3 {SetOwnerAttribute - invalid owner} { + catch {file delete -force -- foo.test} + list [catch {file attributes foo.test -owner foozzz} msg] $msg +} {1 {could not set owner for file "foo.test": user "foozzz" does not exist}} + + +test unixFCmd-17.1 {SetPermissionsAttribute} { + catch {file delete -force -- foo.test} + close [open foo.test w] + list [catch {file attributes foo.test -permissions 0000} msg] $msg [file attributes foo.test -permissions] [file delete -force -- foo.test] +} {0 {} 00000 {}} +test unixFCmd-17.2 {SetPermissionsAttribute} { + catch {file delete -force -- foo.test} + list [catch {file attributes foo.test -permissions 0000} msg] $msg +} {1 {could not set permissions for file "foo.test": no such file or directory}} +test unixFCmd-17.3 {SetPermissionsAttribute} { + catch {file delete -force -- foo.test} + close [open foo.test w] + list [catch {file attributes foo.test -permissions foo} msg] $msg [file delete -force -- foo.test] +} {1 {expected integer but got "foo"} {}} +test unixFCmd-18.1 {Unix pwd} {nonPortable} { + # This test is nonportable because SunOS generates a weird error + # message when the current directory isn't readable. + set cd [pwd] + set nd $cd/tstdir + file mkdir $nd + cd $nd + exec chmod 000 $nd + set r [list [catch {pwd} res] [string range $res 0 36]]; + cd $cd; + exec chmod 755 $nd + file delete $nd + set r +} {1 {error getting working directory name:}} + +cleanup diff --git a/tests/unixNotfy.test b/tests/unixNotfy.test new file mode 100644 index 0000000..5ed5f12 --- /dev/null +++ b/tests/unixNotfy.test @@ -0,0 +1,49 @@ +# This file contains tests for tclUnixNotfy.c. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1997 by Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) unixNotfy.test 1.3 97/09/15 15:39:53 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {$tcl_platform(platform) != "unix"} { + return +} + +# The tests should not be run if you have a notifier which is unable to +# detect infinite vwaits, as the tests below will hang. The presence of +# the "testeventloop" command indicates that this is the case. + +if {"[info commands testeventloop]" == "testeventloop"} { + return +} + +test unixNotfy-1.1 {Tcl_DeleteFileHandler} { + catch {vwait x} + set f [open foo w] + fileevent $f writable {set x 1} + vwait x + close $f + list [catch {vwait x} msg] $msg +} {1 {can't wait for variable "x": would wait forever}} +test unixNotfy-1.2 {Tcl_DeleteFileHandler} { + catch {vwait x} + set f1 [open foo w] + set f2 [open foo2 w] + fileevent $f1 writable {set x 1} + fileevent $f2 writable {set y 1} + vwait x + close $f1 + vwait y + close $f2 + list [catch {vwait x} msg] $msg +} {1 {can't wait for variable "x": would wait forever}} + +file delete foo diff --git a/tests/unknown.test b/tests/unknown.test new file mode 100644 index 0000000..83ad160 --- /dev/null +++ b/tests/unknown.test @@ -0,0 +1,61 @@ +# Commands covered: unknown +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) unknown.test 1.12 96/08/26 11:29:29 + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {unset x} +catch {rename unknown unknown.old} + +test unknown-1.1 {non-existent "unknown" command} { + list [catch {_non-existent_ foo bar} msg] $msg +} {1 {invalid command name "_non-existent_"}} + +proc unknown {args} { + global x + set x $args +} + +test unknown-2.1 {calling "unknown" command} { + foobar x y z + set x +} {foobar x y z} +test unknown-2.2 {calling "unknown" command with lots of args} { + foobar 1 2 3 4 5 6 7 + set x +} {foobar 1 2 3 4 5 6 7} +test unknown-2.3 {calling "unknown" command with lots of args} { + foobar 1 2 3 4 5 6 7 8 + set x +} {foobar 1 2 3 4 5 6 7 8} +test unknown-2.4 {calling "unknown" command with lots of args} { + foobar 1 2 3 4 5 6 7 8 9 + set x +} {foobar 1 2 3 4 5 6 7 8 9} + +test unknown-3.1 {argument quoting in calls to "unknown"} { + foobar \{ \} a\{b \; "\\" \$a a\[b \] + set x +} "foobar \\{ \\} a\\{b {;} \\\\ {\$a} {a\[b} \\]" + +proc unknown args { + error "unknown failed" +} + +test unknown-4.1 {errors in "unknown" procedure} { + list [catch {non-existent a b} msg] $msg $errorCode +} {1 {unknown failed} NONE} + +catch {rename unknown {}} +catch {rename unknown.old unknown} +return {} diff --git a/tests/uplevel.test b/tests/uplevel.test new file mode 100644 index 0000000..84daa03 --- /dev/null +++ b/tests/uplevel.test @@ -0,0 +1,109 @@ +# Commands covered: uplevel +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) uplevel.test 1.13 96/02/16 08:56:35 + +if {[string compare test [info procs test]] == 1} then {source defs} + +proc a {x y} { + newset z [expr $x+$y] + return $z +} +proc newset {name value} { + uplevel set $name $value + uplevel 1 {uplevel 1 {set xyz 22}} +} + +test uplevel-1.1 {simple operation} { + set xyz 0 + a 22 33 +} 55 +test uplevel-1.2 {command is another uplevel command} { + set xyz 0 + a 22 33 + set xyz +} 22 + +proc a1 {} { + b1 + global a a1 + set a $x + set a1 $y +} +proc b1 {} { + c1 + global b b1 + set b $x + set b1 $y +} +proc c1 {} { + uplevel 1 set x 111 + uplevel #2 set y 222 + uplevel 2 set x 333 + uplevel #1 set y 444 + uplevel 3 set x 555 + uplevel #0 set y 666 +} +a1 +test uplevel-2.1 {relative and absolute uplevel} {set a} 333 +test uplevel-2.2 {relative and absolute uplevel} {set a1} 444 +test uplevel-2.3 {relative and absolute uplevel} {set b} 111 +test uplevel-2.4 {relative and absolute uplevel} {set b1} 222 +test uplevel-2.5 {relative and absolute uplevel} {set x} 555 +test uplevel-2.6 {relative and absolute uplevel} {set y} 666 + +test uplevel-3.1 {uplevel to same level} { + set x 33 + uplevel #0 set x 44 + set x +} 44 +test uplevel-3.2 {uplevel to same level} { + set x 33 + uplevel 0 set x +} 33 +test uplevel-3.3 {uplevel to same level} { + set y xxx + proc a1 {} {set y 55; uplevel 0 set y 66; return $y} + a1 +} 66 +test uplevel-3.4 {uplevel to same level} { + set y zzz + proc a1 {} {set y 55; uplevel #1 set y} + a1 +} 55 + +test uplevel-4.1 {error: non-existent level} { + list [catch c1 msg] $msg +} {1 {bad level "#2"}} +test uplevel-4.2 {error: non-existent level} { + proc c2 {} {uplevel 3 {set a b}} + list [catch c2 msg] $msg +} {1 {bad level "3"}} +test uplevel-4.3 {error: not enough args} { + list [catch uplevel msg] $msg +} {1 {wrong # args: should be "uplevel ?level? command ?arg ...?"}} +test uplevel-4.4 {error: not enough args} { + proc upBug {} {uplevel 1} + list [catch upBug msg] $msg +} {1 {wrong # args: should be "uplevel ?level? command ?arg ...?"}} + +proc a2 {} { + uplevel a3 +} +proc a3 {} { + global x y + set x [info level] + set y [info level 1] +} +a2 +test uplevel-5.1 {info level} {set x} 1 +test uplevel-5.2 {info level} {set y} a3 diff --git a/tests/upvar.test b/tests/upvar.test new file mode 100644 index 0000000..d9548b0 --- /dev/null +++ b/tests/upvar.test @@ -0,0 +1,394 @@ +# Commands covered: upvar +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) upvar.test 1.15 97/10/29 18:25:56 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test upvar-1.1 {reading variables with upvar} { + proc p1 {a b} {set c 22; set d 33; p2} + proc p2 {} {upvar a x1 b x2 c x3 d x4; set a abc; list $x1 $x2 $x3 $x4 $a} + p1 foo bar +} {foo bar 22 33 abc} +test upvar-1.2 {reading variables with upvar} { + proc p1 {a b} {set c 22; set d 33; p2} + proc p2 {} {p3} + proc p3 {} {upvar 2 a x1 b x2 c x3 d x4; set a abc; list $x1 $x2 $x3 $x4 $a} + p1 foo bar +} {foo bar 22 33 abc} +test upvar-1.3 {reading variables with upvar} { + proc p1 {a b} {set c 22; set d 33; p2} + proc p2 {} {p3} + proc p3 {} { + upvar #1 a x1 b x2 c x3 d x4 + set a abc + list $x1 $x2 $x3 $x4 $a + } + p1 foo bar +} {foo bar 22 33 abc} +test upvar-1.4 {reading variables with upvar} { + set x1 44 + set x2 55 + proc p1 {} {p2} + proc p2 {} { + upvar 2 x1 x1 x2 a + upvar #0 x1 b + set c $b + incr b 3 + list $x1 $a $b + } + p1 +} {47 55 47} +test upvar-1.5 {reading array elements with upvar} { + proc p1 {} {set a(0) zeroth; set a(1) first; p2} + proc p2 {} {upvar a(0) x; set x} + p1 +} {zeroth} + +test upvar-2.1 {writing variables with upvar} { + proc p1 {a b} {set c 22; set d 33; p2; list $a $b $c $d} + proc p2 {} { + upvar a x1 b x2 c x3 d x4 + set x1 14 + set x4 88 + } + p1 foo bar +} {14 bar 22 88} +test upvar-2.2 {writing variables with upvar} { + set x1 44 + set x2 55 + proc p1 {x1 x2} { + upvar #0 x1 a + upvar x2 b + set a $x1 + set b $x2 + } + p1 newbits morebits + list $x1 $x2 +} {newbits morebits} +test upvar-2.3 {writing variables with upvar} { + catch {unset x1} + catch {unset x2} + proc p1 {x1 x2} { + upvar #0 x1 a + upvar x2 b + set a $x1 + set b $x2 + } + p1 newbits morebits + list [catch {set x1} msg] $msg [catch {set x2} msg] $msg +} {0 newbits 0 morebits} +test upvar-2.4 {writing array elements with upvar} { + proc p1 {} {set a(0) zeroth; set a(1) first; list [p2] $a(0)} + proc p2 {} {upvar a(0) x; set x xyzzy} + p1 +} {xyzzy xyzzy} + +test upvar-3.1 {unsetting variables with upvar} { + proc p1 {a b} {set c 22; set d 33; p2; lsort [info vars]} + proc p2 {} { + upvar 1 a x1 d x2 + unset x1 x2 + } + p1 foo bar +} {b c} +test upvar-3.2 {unsetting variables with upvar} { + proc p1 {a b} {set c 22; set d 33; p2; lsort [info vars]} + proc p2 {} { + upvar 1 a x1 d x2 + unset x1 x2 + set x2 28 + } + p1 foo bar +} {b c d} +test upvar-3.3 {unsetting variables with upvar} { + set x1 44 + set x2 55 + proc p1 {} {p2} + proc p2 {} { + upvar 2 x1 a + upvar #0 x2 b + unset a b + } + p1 + list [info exists x1] [info exists x2] +} {0 0} +test upvar-3.4 {unsetting variables with upvar} { + set x1 44 + set x2 55 + proc p1 {} { + upvar x1 a x2 b + unset a b + set b 118 + } + p1 + list [info exists x1] [catch {set x2} msg] $msg +} {0 0 118} +test upvar-3.5 {unsetting array elements with upvar} { + proc p1 {} { + set a(0) zeroth + set a(1) first + set a(2) second + p2 + array names a + } + proc p2 {} {upvar a(0) x; unset x} + p1 +} {1 2} +test upvar-3.6 {unsetting then resetting array elements with upvar} { + proc p1 {} { + set a(0) zeroth + set a(1) first + set a(2) second + p2 + list [array names a] [catch {set a(0)} msg] $msg + } + proc p2 {} {upvar a(0) x; unset x; set x 12345} + p1 +} {{0 1 2} 0 12345} + +test upvar-4.1 {nested upvars} { + set x1 88 + proc p1 {a b} {set c 22; set d 33; p2} + proc p2 {} {global x1; upvar c x2; p3} + proc p3 {} { + upvar x1 a x2 b + list $a $b + } + p1 14 15 +} {88 22} +test upvar-4.2 {nested upvars} { + set x1 88 + proc p1 {a b} {set c 22; set d 33; p2; list $a $b $c $d} + proc p2 {} {global x1; upvar c x2; p3} + proc p3 {} { + upvar x1 a x2 b + set a foo + set b bar + } + list [p1 14 15] $x1 +} {{14 15 bar 33} foo} + +proc tproc {args} {global x; set x [list $args [uplevel info vars]]} +test upvar-5.1 {traces involving upvars} { + proc p1 {a b} {set c 22; set d 33; trace var c rw tproc; p2} + proc p2 {} {upvar c x1; set x1 22} + set x --- + p1 foo bar + set x +} {{x1 {} w} x1} +test upvar-5.2 {traces involving upvars} { + proc p1 {a b} {set c 22; set d 33; trace var c rw tproc; p2} + proc p2 {} {upvar c x1; set x1} + set x --- + p1 foo bar + set x +} {{x1 {} r} x1} +test upvar-5.3 {traces involving upvars} { + proc p1 {a b} {set c 22; set d 33; trace var c rwu tproc; p2} + proc p2 {} {upvar c x1; unset x1} + set x --- + p1 foo bar + set x +} {{x1 {} u} x1} + +test upvar-6.1 {retargeting an upvar} { + proc p1 {} { + set a(0) zeroth + set a(1) first + set a(2) second + p2 + } + proc p2 {} { + upvar a x + set result {} + foreach i [array names x] { + upvar a($i) x + lappend result $x + } + lsort $result + } + p1 +} {first second zeroth} +test upvar-6.2 {retargeting an upvar} { + set x 44 + set y abcde + proc p1 {} { + global x + set result $x + upvar y x + lappend result $x + } + p1 +} {44 abcde} +test upvar-6.3 {retargeting an upvar} { + set x 44 + set y abcde + proc p1 {} { + upvar y x + lappend result $x + global x + lappend result $x + } + p1 +} {abcde 44} + +test upvar-7.1 {upvar to same level} { + set x 44 + set y 55 + catch {unset uv} + upvar #0 x uv + set uv abc + upvar 0 y uv + set uv xyzzy + list $x $y +} {abc xyzzy} +test upvar-7.2 {upvar to same level} { + set x 1234 + set y 4567 + proc p1 {x y} { + upvar 0 x uv + set uv $y + return "$x $y" + } + p1 44 89 +} {89 89} +test upvar-7.3 {upvar to same level} { + set x 1234 + set y 4567 + proc p1 {x y} { + upvar #1 x uv + set uv $y + return "$x $y" + } + p1 xyz abc +} {abc abc} +test upvar-7.4 {upvar to same level: tricky problems when deleting variable table} { + proc tt {} {upvar #1 toto loc; return $loc} + list [catch tt msg] $msg +} {1 {can't read "loc": no such variable}} +test upvar-7.5 {potential memory leak when deleting variable table} { + proc leak {} { + array set foo {1 2 3 4} + upvar 0 foo(1) bar + } + leak +} {} + +test upvar-8.1 {errors in upvar command} { + list [catch upvar msg] $msg +} {1 {wrong # args: should be "upvar ?level? otherVar localVar ?otherVar localVar ...?"}} +test upvar-8.2 {errors in upvar command} { + list [catch {upvar 1} msg] $msg +} {1 {wrong # args: should be "upvar ?level? otherVar localVar ?otherVar localVar ...?"}} +test upvar-8.3 {errors in upvar command} { + proc p1 {} {upvar a b c} + list [catch p1 msg] $msg +} {1 {wrong # args: should be "upvar ?level? otherVar localVar ?otherVar localVar ...?"}} +test upvar-8.4 {errors in upvar command} { + proc p1 {} {upvar 0 b b} + list [catch p1 msg] $msg +} {1 {can't upvar from variable to itself}} +test upvar-8.5 {errors in upvar command} { + proc p1 {} {upvar 0 a b; upvar 0 b a} + list [catch p1 msg] $msg +} {1 {can't upvar from variable to itself}} +test upvar-8.6 {errors in upvar command} { + proc p1 {} {set a 33; upvar b a} + list [catch p1 msg] $msg +} {1 {variable "a" already exists}} +test upvar-8.7 {errors in upvar command} { + proc p1 {} {trace variable a w foo; upvar b a} + list [catch p1 msg] $msg +} {1 {variable "a" has traces: can't use for upvar}} +test upvar-8.8 {create nested array with upvar} { + proc p1 {} {upvar x(a) b; set b(2) 44} + catch {unset x} + list [catch p1 msg] $msg +} {1 {can't set "b(2)": variable isn't array}} +test upvar-8.9 {upvar won't create namespace variable that refers to procedure variable} { + catch {eval namespace delete [namespace children :: test_ns_*]} + catch {rename MakeLink ""} + namespace eval ::test_ns_1 {} + proc MakeLink {a} { + namespace eval ::test_ns_1 { + upvar a a + } + unset ::test_ns_1::a + } + list [catch {MakeLink 1} msg] $msg +} {1 {bad variable name "a": upvar won't create namespace variable that refers to procedure variable}} + +if {[info commands testupvar] != {}} { + test upvar-9.1 {Tcl_UpVar2 procedure} { + list [catch {testupvar xyz a {} x global} msg] $msg + } {1 {bad level "xyz"}} + test upvar-9.2 {Tcl_UpVar2 procedure} { + catch {unset a} + catch {unset x} + set a 44 + list [catch {testupvar #0 a 1 x global} msg] $msg + } {1 {can't access "a(1)": variable isn't array}} + test upvar-9.3 {Tcl_UpVar2 procedure} { + proc foo {} { + testupvar 1 a {} x local + set x + } + catch {unset a} + catch {unset x} + set a 44 + foo + } {44} + test upvar-9.4 {Tcl_UpVar2 procedure} { + proc foo {} { + testupvar 1 a {} _up_ global + list [catch {set x} msg] $msg + } + catch {unset a} + catch {unset _up_} + set a 44 + concat [foo] $_up_ + } {1 {can't read "x": no such variable} 44} + test upvar-9.5 {Tcl_UpVar2 procedure} { + proc foo {} { + testupvar 1 a b x local + set x + } + catch {unset a} + catch {unset x} + set a(b) 1234 + foo + } {1234} + test upvar-9.6 {Tcl_UpVar procedure} { + proc foo {} { + testupvar 1 a x local + set x + } + catch {unset a} + catch {unset x} + set a xyzzy + foo + } {xyzzy} + test upvar-9.7 {Tcl_UpVar procedure} { + proc foo {} { + testupvar #0 a(b) x local + set x + } + catch {unset a} + catch {unset x} + set a(b) 1234 + foo + } {1234} +} +catch {unset a} + +concat diff --git a/tests/util.test b/tests/util.test new file mode 100644 index 0000000..ee37047 --- /dev/null +++ b/tests/util.test @@ -0,0 +1,132 @@ +# This file is a Tcl script to test the code in the file tclUtil.c. +# This file is organized in the standard fashion for Tcl tests. +# +# Copyright (c) 1995-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) util.test 1.8 97/08/12 15:50:02 + +if {[info commands testobj] == {}} { + puts "This application hasn't been compiled with the \"testobj\"" + puts "command, so I can't test the Tcl type and object support." + return +} + +if {[string compare test [info procs test]] == 1} then {source defs} + +test util-1.1 {TclFindElement procedure - binary element in middle of list} { + lindex {0 foo\x00help 1} 1 +} "foo\x00help" +test util-1.2 {TclFindElement procedure - binary element at end of list} { + lindex {0 foo\x00help} 1 +} "foo\x00help" + +test util-2.1 {TclCopyAndCollapse procedure - normal string} { + lindex {0 foo} 1 +} {foo} +test util-2.2 {TclCopyAndCollapse procedure - string with backslashes} { + lindex {0 foo\n\x00help 1} 1 +} "foo\n\x00help" + +test util-3.1 {Tcl_ScanCountedElement procedure - don't leave unmatched braces} { + # This test checks for a very tricky feature. Any list element + # generated with Tcl_ScanCountedElement and Tcl_ConvertElement must + # have the property that it can be enclosing in curly braces to make + # an embedded sub-list. If this property doesn't hold, then + # Tcl_DStringStartSublist doesn't work. + + set x {} + lappend x " \\\{ \\" + concat $x [llength "{$x}"] +} {\ \\\{\ \\ 1} + +test util-4.1 {Tcl_ConcatObj - backslash-space at end of argument} { + concat a {b\ } c +} {a b\ c} +test util-4.2 {Tcl_ConcatObj - backslash-space at end of argument} { + concat a {b\ } c +} {a b\ c} +test util-4.3 {Tcl_ConcatObj - backslash-space at end of argument} { + concat a {b\\ } c +} {a b\\ c} +test util-4.4 {Tcl_ConcatObj - backslash-space at end of argument} { + concat a {b } c +} {a b c} +test util-4.5 {Tcl_ConcatObj - backslash-space at end of argument} { + concat a { } c +} {a c} + +test util-5.1 {Tcl_SetObjErrorCode - one arg} { + catch {testsetobjerrorcode 1} + list [set errorCode] +} {1} +test util-5.2 {Tcl_SetObjErrorCode - two args} { + catch {testsetobjerrorcode 1 2} + list [set errorCode] +} {{1 2}} +test util-5.3 {Tcl_SetObjErrorCode - three args} { + catch {testsetobjerrorcode 1 2 3} + list [set errorCode] +} {{1 2 3}} +test util-5.4 {Tcl_SetObjErrorCode - four args} { + catch {testsetobjerrorcode 1 2 3 4} + list [set errorCode] +} {{1 2 3 4}} +test util-5.5 {Tcl_SetObjErrorCode - five args} { + catch {testsetobjerrorcode 1 2 3 4 5} + list [set errorCode] +} {{1 2 3 4 5}} + +test util-6.1 {Tcl_PrintDouble - using tcl_precision} { + concat x[expr 1.4] +} {x1.4} +test util-6.2 {Tcl_PrintDouble - using tcl_precision} { + concat x[expr 1.39999999999] +} {x1.39999999999} +test util-6.3 {Tcl_PrintDouble - using tcl_precision} { + concat x[expr 1.399999999999] +} {x1.4} +test util-6.4 {Tcl_PrintDouble - using tcl_precision} { + set tcl_precision 5 + concat x[expr 1.123412341234] +} {x1.1234} +set tcl_precision 12 +test util-6.4 {Tcl_PrintDouble - make sure there's a decimal point} { + concat x[expr 2.0] +} {x2.0} +test util-6.5 {Tcl_PrintDouble - make sure there's a decimal point} { + concat x[expr 3.0e98] +} {x3e+98} + +test util-7.1 {TclPrecTraceProc - unset callbacks} { + set tcl_precision 7 + set x $tcl_precision + unset tcl_precision + list $x $tcl_precision +} {7 7} +test util-7.2 {TclPrecTraceProc - read traces, sharing among interpreters} { + set tcl_precision 12 + interp create child + set x [child eval set tcl_precision] + child eval {set tcl_precision 6} + interp delete child + list $x $tcl_precision +} {12 6} +test util-7.3 {TclPrecTraceProc - write traces, safe interpreters} { + set tcl_precision 12 + interp create -safe child + set x [child eval { + list [catch {set tcl_precision 8} msg] $msg + }] + interp delete child + list $x $tcl_precision +} {{1 {can't set "tcl_precision": can't modify precision from a safe interpreter}} 12} +test util-7.3 {TclPrecTraceProc - write traces, bogus values} { + set tcl_precision 12 + list [catch {set tcl_precision abc} msg] $msg $tcl_precision +} {1 {can't set "tcl_precision": improper value for precision} 12} + +set tcl_precision 12 +concat "" diff --git a/tests/var.test b/tests/var.test new file mode 100644 index 0000000..6452577 --- /dev/null +++ b/tests/var.test @@ -0,0 +1,467 @@ +# This file contains tests for the tclVar.c source file. Tests appear in +# the same order as the C code that they test. The set of tests is +# currently incomplete since it currently includes only new tests for +# code changed for the addition of Tcl namespaces. Other variable- +# related tests appear in several other test files including +# namespace.test, set.test, trace.test, and upvar.test. +# +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) var.test 1.10 97/07/28 18:31:47 +# + +if {[string compare test [info procs test]] == 1} then {source defs} + +catch {rename p ""} +catch {namespace delete test_ns_var} +catch {unset xx} +catch {unset x} +catch {unset y} +catch {unset i} +catch {unset a} +catch {unset arr} + +test var-1.1 {TclLookupVar, TCL_PARSE_PART1 flag set} { + catch {unset a} + set x "incr" ;# force no compilation and runtime call to Tcl_IncrCmd + set i 10 + set arr(foo) 37 + list [$x i] $i [$x arr(foo)] $arr(foo) +} {11 11 38 38} +test var-1.2 {TclLookupVar, TCL_GLOBAL_ONLY implies global namespace var} { + set x "global value" + namespace eval test_ns_var { + variable x "namespace value" + proc p {} { + global x ;# specifies TCL_GLOBAL_ONLY to get global x + return $x + } + } + test_ns_var::p +} {global value} +test var-1.3 {TclLookupVar, TCL_NAMESPACE_ONLY implies namespace var} { + namespace eval test_ns_var { + proc q {} { + variable x ;# specifies TCL_NAMESPACE_ONLY to get namespace x + return $x + } + } + test_ns_var::q +} {namespace value} +test var-1.4 {TclLookupVar, no active call frame implies global namespace var} { + set x +} {global value} +test var-1.5 {TclLookupVar, active call frame pushed for namespace eval implies namespace var} { + namespace eval test_ns_var {set x} +} {namespace value} +test var-1.6 {TclLookupVar, name starts with :: implies some namespace var} { + namespace eval test_ns_var {set ::x} +} {global value} +test var-1.7 {TclLookupVar, error finding namespace var} { + list [catch {set a:::b} msg] $msg +} {1 {can't read "a:::b": no such variable}} +test var-1.8 {TclLookupVar, error finding namespace var} { + list [catch {set ::foobarfoo} msg] $msg +} {1 {can't read "::foobarfoo": no such variable}} +test var-1.9 {TclLookupVar, create new namespace var} { + namespace eval test_ns_var { + set v hello + } +} {hello} +test var-1.10 {TclLookupVar, create new namespace var} { + catch {unset y} + namespace eval test_ns_var { + set ::y 789 + } + set y +} {789} +test var-1.11 {TclLookupVar, error creating new namespace var} { + namespace eval test_ns_var { + list [catch {set ::test_ns_var::foo::bar 314159} msg] $msg + } +} {1 {can't set "::test_ns_var::foo::bar": parent namespace doesn't exist}} +test var-1.12 {TclLookupVar, error creating new namespace var} { + namespace eval test_ns_var { + list [catch {set ::test_ns_var::foo:: 1997} msg] $msg + } +} {1 {can't set "::test_ns_var::foo::": parent namespace doesn't exist}} +test var-1.13 {TclLookupVar, new namespace var is created in a particular namespace} { + catch {unset aNeWnAmEiNnS} + namespace eval test_ns_var { + namespace eval test_ns_var2::test_ns_var3 { + set aNeWnAmEiNnS 77777 + } + # namespace which builds a name by traversing nsPtr chain to :: + namespace which -variable test_ns_var2::test_ns_var3::aNeWnAmEiNnS + } +} {::test_ns_var::test_ns_var2::test_ns_var3::aNeWnAmEiNnS} +test var-1.14 {TclLookupVar, namespace code ignores ":"s in middle and end of var names} { + namespace eval test_ns_var { + set : 123 + set v: 456 + set x:y: 789 + list [set :] [set v:] [set x:y:] \ + ${:} ${v:} ${x:y:} \ + [expr {[lsearch [info vars] :] != -1}] \ + [expr {[lsearch [info vars] v:] != -1}] \ + [expr {[lsearch [info vars] x:y:] != -1}] + } +} {123 456 789 123 456 789 1 1 1} + +test var-2.1 {Tcl_LappendObjCmd, create var if new} { + catch {unset x} + lappend x 1 2 +} {1 2} + +test var-3.1 {MakeUpvar, TCL_NAMESPACE_ONLY not specified for other var} { + catch {unset x} + set x 1997 + proc p {} { + global x ;# calls MakeUpvar with TCL_NAMESPACE_ONLY for other var x + return $x + } + p +} {1997} +test var-3.2 {MakeUpvar, other var has TCL_NAMESPACE_ONLY specified} { + namespace eval test_ns_var { + catch {unset v} + variable v 1998 + proc p {} { + variable v ;# TCL_NAMESPACE_ONLY specified for other var x + return $v + } + p + } +} {1998} +if {[info commands testupvar] != {}} { + test var-3.3 {MakeUpvar, my var has TCL_GLOBAL_ONLY specified} { + catch {unset a} + set a 123321 + proc p {} { + # create global xx linked to global a + testupvar 1 a {} xx global + } + list [p] $xx [set xx 789] $a + } {{} 123321 789 789} + test var-3.4 {MakeUpvar, my var has TCL_NAMESPACE_ONLY specified} { + catch {unset a} + set a 456 + namespace eval test_ns_var { + catch {unset ::test_ns_var::vv} + proc p {} { + # create namespace var vv linked to global a + testupvar 1 a {} vv namespace + } + p + } + list $test_ns_var::vv [set test_ns_var::vv 123] $a + } {456 123 123} +} +test var-3.5 {MakeUpvar, no call frame so my var will be in global :: ns} { + catch {unset aaaaa} + catch {unset xxxxx} + set aaaaa 77777 + upvar #0 aaaaa xxxxx + list [set xxxxx] [set aaaaa] +} {77777 77777} +test var-3.6 {MakeUpvar, active call frame pushed for namespace eval} { + catch {unset a} + set a 121212 + namespace eval test_ns_var { + upvar ::a vvv + set vvv + } +} {121212} +test var-3.7 {MakeUpvar, my var has ::s} { + catch {unset a} + set a 789789 + upvar #0 a test_ns_var::lnk + namespace eval test_ns_var { + set lnk + } +} {789789} +test var-3.8 {MakeUpvar, my var already exists in global ns} { + catch {unset aaaaa} + catch {unset xxxxx} + set aaaaa 456654 + set xxxxx hello + upvar #0 aaaaa xxxxx + set xxxxx +} {hello} +test var-3.9 {MakeUpvar, my var has invalid ns name} { + catch {unset aaaaa} + set aaaaa 789789 + list [catch {upvar #0 aaaaa test_ns_fred::lnk} msg] $msg +} {1 {bad variable name "test_ns_fred::lnk": unknown namespace}} + +if {[info commands testgetvarfullname] != {}} { + test var-4.1 {Tcl_GetVariableName, global variable} { + catch {unset a} + set a 123 + testgetvarfullname a global + } ::a + test var-4.2 {Tcl_GetVariableName, namespace variable} { + namespace eval test_ns_var { + variable george + testgetvarfullname george namespace + } + } ::test_ns_var::george + test var-4.3 {Tcl_GetVariableName, variable can't be array element} { + catch {unset a} + set a(1) foo + list [catch {testgetvarfullname a(1) global} msg] $msg + } {1 {unknown variable "a(1)"}} +} + +test var-5.1 {Tcl_GetVariableFullName, global variable} { + catch {unset a} + set a bar + namespace which -variable a +} {::a} +test var-5.2 {Tcl_GetVariableFullName, namespace variable} { + namespace eval test_ns_var { + variable martha + namespace which -variable martha + } +} {::test_ns_var::martha} +test var-5.3 {Tcl_GetVariableFullName, namespace variable} { + namespace which -variable test_ns_var::martha +} {::test_ns_var::martha} + +test var-6.1 {Tcl_GlobalObjCmd, variable is qualified by a namespace name} { + namespace eval test_ns_var { + variable boeing 777 + } + proc p {} { + global ::test_ns_var::boeing + set boeing + } + p +} {777} +test var-6.2 {Tcl_GlobalObjCmd, variable is qualified by a namespace name} { + namespace eval test_ns_var { + namespace eval test_ns_nested { + variable java java + } + proc p {} { + global ::test_ns_var::test_ns_nested::java + set java + } + } + test_ns_var::p +} {java} +test var-6.3 {Tcl_GlobalObjCmd, variable named {} qualified by a namespace name} { + set ::test_ns_var::test_ns_nested:: 24 + proc p {} { + global ::test_ns_var::test_ns_nested:: + set {} + } + p +} {24} + +test var-7.1 {Tcl_VariableObjCmd, create and initialize one new ns variable} { + catch {namespace delete test_ns_var} + namespace eval test_ns_var { + variable one 1 + } + list [info vars test_ns_var::*] [set test_ns_var::one] +} {::test_ns_var::one 1} +test var-7.2 {Tcl_VariableObjCmd, if new and no value, leave undefined} { + set two 2222222 + namespace eval test_ns_var { + variable two + } + list [info exists test_ns_var::two] [catch {set test_ns_var::two} msg] $msg +} {0 1 {can't read "test_ns_var::two": no such variable}} +test var-7.3 {Tcl_VariableObjCmd, "define" var already created above} { + namespace eval test_ns_var { + variable two 2 + } + list [info vars test_ns_var::*] \ + [namespace eval test_ns_var {set two}] +} {{::test_ns_var::two ::test_ns_var::one} 2} +test var-7.4 {Tcl_VariableObjCmd, list of vars} { + namespace eval test_ns_var { + variable three 3 four 4 + } + list [info vars test_ns_var::*] \ + [namespace eval test_ns_var {expr $three+$four}] +} {{::test_ns_var::four ::test_ns_var::three ::test_ns_var::two ::test_ns_var::one} 7} +test var-7.5 {Tcl_VariableObjCmd, value for last var is optional} { + catch {unset a} + catch {unset five} + catch {unset six} + set a "" + set five 555 + set six 666 + namespace eval test_ns_var { + variable five 5 six + lappend a $five + } + lappend a $test_ns_var::five \ + [set test_ns_var::six 6] [set test_ns_var::six] $six + catch {unset five} + catch {unset six} + set a +} {5 5 6 6 666} +catch {unset newvar} +test var-7.6 {Tcl_VariableObjCmd, variable name can be qualified} { + namespace eval test_ns_var { + variable ::newvar cheers! + } + set newvar +} {cheers!} +catch {unset newvar} +test var-7.7 {Tcl_VariableObjCmd, bad var name} { + namespace eval test_ns_var { + list [catch {variable sev:::en 7} msg] $msg + } +} {1 {can't define "sev:::en": parent namespace doesn't exist}} +test var-7.8 {Tcl_VariableObjCmd, if var already exists and no value is given, leave value unchanged} { + set a "" + namespace eval test_ns_var { + variable eight 8 + lappend a $eight + variable eight + lappend a $eight + } + set a +} {8 8} +test var-7.9 {Tcl_VariableObjCmd, mark as namespace var so var persists until namespace is destroyed or var is unset} { + catch {namespace delete test_ns_var2} + set a "" + namespace eval test_ns_var2 { + variable x 123 + variable y + variable z + } + lappend a [info vars test_ns_var2::*] + lappend a [info exists test_ns_var2::x] [info exists test_ns_var2::y] \ + [info exists test_ns_var2::z] + lappend a [list [catch {set test_ns_var2::y} msg] $msg] + lappend a [info vars test_ns_var2::*] + lappend a [info exists test_ns_var2::y] [info exists test_ns_var2::z] + lappend a [set test_ns_var2::y hello] + lappend a [info exists test_ns_var2::y] [info exists test_ns_var2::z] + lappend a [list [catch {unset test_ns_var2::y} msg] $msg] + lappend a [info vars test_ns_var2::*] + lappend a [info exists test_ns_var2::y] [info exists test_ns_var2::z] + lappend a [list [catch {unset test_ns_var2::z} msg] $msg] + lappend a [namespace delete test_ns_var2] + set a +} {{::test_ns_var2::x ::test_ns_var2::y ::test_ns_var2::z} 1 0 0\ +{1 {can't read "test_ns_var2::y": no such variable}}\ +{::test_ns_var2::x ::test_ns_var2::y ::test_ns_var2::z} 0 0\ +hello 1 0\ +{0 {}}\ +{::test_ns_var2::x ::test_ns_var2::z} 0 0\ +{1 {can't unset "test_ns_var2::z": no such variable}}\ +{}} +test var-7.10 {Tcl_VariableObjCmd, variable cmd inside proc creates local link var} { + namespace eval test_ns_var { + proc p {} { + variable eight + list [set eight] [info vars] + } + p + } +} {8 eight} +test var-7.11 {Tcl_VariableObjCmd, variable cmd inside proc creates local link var} { + proc p {} { ;# note this proc is at global :: scope + variable test_ns_var::eight + list [set eight] [info vars] + } + p +} {8 eight} +test var-7.12 {Tcl_VariableObjCmd, variable cmd inside proc creates local link var} { + namespace eval test_ns_var { + variable {} {My name is empty} + } + proc p {} { ;# note this proc is at global :: scope + variable test_ns_var:: + list [set {}] [info vars] + } + p +} {{My name is empty} {{}}} + +test var-8.1 {TclDeleteVars, "unset" traces are called with fully-qualified var names} { + catch {namespace delete test_ns_var} + catch {unset a} + namespace eval test_ns_var { + variable v 123 + variable info "" + + proc traceUnset {name1 name2 op} { + variable info + set info [concat $info [list $name1 $name2 $op]] + } + + trace var v u [namespace code traceUnset] + } + list [unset test_ns_var::v] $test_ns_var::info +} {{} {test_ns_var::v {} u}} + +test var-9.1 {behaviour of TclSetVar without TCL_LEAVE_ERR_MSG flag} { + testsetnoerr v 1 +} 1 +test var-9.2 {behaviour of TclGetVar without TCL_LEAVE_ERR_MSG flag} { + catch {unset v} + list [catch {testsetnoerr v} res] $res; +} {1 {before get}} +test var-9.3 {behaviour of TclGetVar without TCL_LEAVE_ERR_MSG flag} { + catch {unset arr} + set arr(1) 1; + list [catch {testsetnoerr arr} res] $res; +} {1 {before get}} +test var-9.4 {behaviour of TclGetVar without TCL_LEAVE_ERR_MSG flag} { + namespace eval ns {variable v nsv} + testsetnoerr ns::v; +} nsv; +test var-9.5 {behaviour of TclGetVar without TCL_LEAVE_ERR_MSG flag} { + catch {namespace delete ns} + list [catch {testsetnoerr ns::v} res] $res; +} {1 {before get}} +test var-9.6 {behaviour of TclSetVar without TCL_LEAVE_ERR_MSG flag} { + catch {unset arr} + set arr(1) 1; + list [catch {testsetnoerr arr 2} res] $res; +} {1 {before set}} +test var-9.7 {behaviour of TclSetVar without TCL_LEAVE_ERR_MSG flag} { + catch {unset arr} + set arr(1) 1; + list [catch {testsetnoerr arr 2} res] $res; +} {1 {before set}} +test var-9.8 {behaviour of TclSetVar without TCL_LEAVE_ERR_MSG flag} { + # this test currently fails, should not... + # (some namespace function resets the interp while it should not) + catch {namespace delete ns} + list [catch {testsetnoerr ns::v 1} res] $res; +} {1 {before set}} +test var-9.9 {behaviour of TclSetVar without TCL_LEAVE_ERR_MSG flag} { + proc readonly args {error "read-only"} + set v 456 + trace var v w readonly + list [catch {testsetnoerr v 2} msg] $msg +} {1 {before set}} + +catch {namespace delete ns} +catch {unset arr} +catch {unset v} + +catch {rename p ""} +catch {namespace delete test_ns_var} +catch {namespace delete test_ns_var2} +catch {unset xx} +catch {unset x} +catch {unset y} +catch {unset i} +catch {unset a} +catch {unset xxxxx} +catch {unset aaaaa} + diff --git a/tests/while-old.test b/tests/while-old.test new file mode 100644 index 0000000..f5e5b05 --- /dev/null +++ b/tests/while-old.test @@ -0,0 +1,113 @@ +# Commands covered: while +# +# This file contains the original set of tests for Tcl's while command. +# Since the while command is now compiled, a new set of tests covering +# the new implementation is in the file "while.test". Sourcing this file +# into Tcl runs the tests and generates output for errors. +# No output means no errors were found. +# +# Copyright (c) 1991-1993 The Regents of the University of California. +# Copyright (c) 1994-1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) while-old.test 1.14 97/05/16 10:44:19 + +if {[string compare test [info procs test]] == 1} then {source defs} + +test while-old-1.1 {basic while loops} { + set count 0 + while {$count < 10} {set count [expr $count+1]} + set count +} 10 +test while-old-1.2 {basic while loops} { + set value xxx + while {2 > 3} {set value yyy} + set value +} xxx +test while-old-1.3 {basic while loops} { + set value 1 + while {"true"} { + incr value; + if {$value > 5} { + break; + } + } + set value +} 6 +test while-old-1.4 {basic while loops, multiline test expr} { + set value 1 + while {($tcl_platform(platform) != "foobar1") && \ + ($tcl_platform(platform) != "foobar2")} { + incr value + break + } + set value +} {2} +test while-old-1.5 {basic while loops, test expr in quotes} { + set value 1 + while "0 < 3" {set value 2; break} + set value +} {2} + +test while-old-2.1 {continue in while loop} { + set list {1 2 3 4 5} + set index 0 + set result {} + while {$index < 5} { + if {$index == 2} {set index [expr $index+1]; continue} + set result [concat $result [lindex $list $index]] + set index [expr $index+1] + } + set result +} {1 2 4 5} + +test while-old-3.1 {break in while loop} { + set list {1 2 3 4 5} + set index 0 + set result {} + while {$index < 5} { + if {$index == 3} break + set result [concat $result [lindex $list $index]] + set index [expr $index+1] + } + set result +} {1 2 3} + +test while-old-4.1 {errors in while loops} { + set err [catch {while} msg] + list $err $msg +} {1 {wrong # args: should be "while test command"}} +test while-old-4.2 {errors in while loops} { + set err [catch {while 1} msg] + list $err $msg +} {1 {wrong # args: should be "while test command"}} +test while-old-4.3 {errors in while loops} { + set err [catch {while 1 2 3} msg] + list $err $msg +} {1 {wrong # args: should be "while test command"}} +test while-old-4.4 {errors in while loops} { + set err [catch {while {"a"+"b"} {error "loop aborted"}} msg] + list $err $msg +} {1 {can't use non-numeric string as operand of "+"}} +test while-old-4.5 {errors in while loops} { + catch {unset x} + set x 1 + set err [catch {while {$x} {set x foo}} msg] + list $err $msg +} {1 {expected boolean value but got "foo"}} +test while-old-4.6 {errors in while loops} { + set err [catch {while {1} {error "loop aborted"}} msg] + list $err $msg $errorInfo +} {1 {loop aborted} {loop aborted + while executing +"error "loop aborted""}} + +test while-old-5.1 {while return result} { + while {0} {set a 400} +} {} +test while-old-5.2 {while return result} { + set x 1 + while {$x} {set x 0} +} {} diff --git a/tests/while.test b/tests/while.test new file mode 100644 index 0000000..8642747 --- /dev/null +++ b/tests/while.test @@ -0,0 +1,319 @@ +# Commands covered: while +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) @(#) while.test 1.9 97/07/02 16:41:35 + +if {[string compare test [info procs test]] == 1} then {source defs} + +# Basic "while" operation. + +catch {unset i} +catch {unset a} + +test while-1.1 {TclCompileWhileCmd: missing test expression} { + catch {while } msg + set msg +} {wrong # args: should be "while test command"} +test while-1.2 {TclCompileWhileCmd: error in test expression} { + set i 0 + catch {while {$i<}} msg + set errorInfo +} {syntax error in expression "$i<" + ("while" test expression) + while compiling +"while {$i<}"} +test while-1.3 {TclCompileWhileCmd: error in test expression} { + set err [catch {while {"a"+"b"} {error "loop aborted"}} msg] + list $err $msg +} {1 {can't use non-numeric string as operand of "+"}} +test while-1.4 {TclCompileWhileCmd: multiline test expr} { + set value 1 + while {($tcl_platform(platform) != "foobar1") && \ + ($tcl_platform(platform) != "foobar2")} { + incr value + break + } + set value +} {2} +test while-1.5 {TclCompileWhileCmd: non-numeric boolean test expr} { + set value 1 + while {"true"} { + incr value; + if {$value > 5} { + break; + } + } + set value +} 6 +test while-1.6 {TclCompileWhileCmd: test expr is enclosed in quotes} { + set i 0 + while "$i > 5" {} +} {} +test while-1.7 {TclCompileWhileCmd: missing command body} { + set i 0 + catch {while {$i < 5} } msg + set msg +} {wrong # args: should be "while test command"} +test while-1.8 {TclCompileWhileCmd: error compiling command body} { + set i 0 + catch {while {$i < 5} {set}} msg + set errorInfo +} {wrong # args: should be "set varName ?newValue?" + while compiling +"set" + ("while" body line 1) + while compiling +"while {$i < 5} {set}"} +test while-1.9 {TclCompileWhileCmd: simple command body} { + set a {} + set i 1 + while {$i<6} { + if $i==4 break + set a [concat $a $i] + incr i + } + set a +} {1 2 3} +test while-1.10 {TclCompileWhileCmd: command body in quotes} { + set a {} + set i 1 + while {$i<6} "append a x; incr i" + set a +} {xxxxx} +test while-1.11 {TclCompileWhileCmd: computed command body} { + catch {unset x1} + catch {unset bb} + catch {unset x2} + set x1 {append a x1; } + set bb {break} + set x2 {; append a x2; incr i} + set a {} + set i 1 + while {$i<6} $x1$bb$x2 + set a +} {x1} +test while-1.12 {TclCompileWhileCmd: long command body} { + set a {} + set i 1 + while {$i<6} { + if $i==4 break + if $i>5 continue + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + set a [concat $a $i] + incr i + } + set a +} {1 2 3} +test while-1.13 {TclCompileWhileCmd: while command result} { + set i 0 + set a [while {$i < 5} {incr i}] + set a +} {} +test while-1.14 {TclCompileWhileCmd: while command result} { + set i 0 + set a [while {$i < 5} {if $i==3 break; incr i}] + set a +} {} + +# Check "while" and "continue". + +test while-2.1 {continue tests} { + set a {} + set i 1 + while {$i <= 4} { + incr i + if {$i == 3} continue + set a [concat $a $i] + } + set a +} {2 4 5} +test while-2.2 {continue tests} { + set a {} + set i 1 + while {$i <= 4} { + incr i + if {$i != 2} continue + set a [concat $a $i] + } + set a +} {2} +test while-2.3 {continue tests, nested loops} { + set msg {} + set i 1 + while {$i <= 4} { + incr i + set a 1 + while {$a <= 2} { + incr a + if {$i>=3 && $a>=3} continue + set msg [concat $msg "$i.$a"] + } + } + set msg +} {2.2 2.3 3.2 4.2 5.2} +test while-2.4 {continue tests, long command body} { + set a {} + set i 1 + while {$i<6} { + if $i==2 {incr i; continue} + if $i==4 break + if $i>5 continue + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + set a [concat $a $i] + incr i + } + set a +} {1 3} + +# Check "while" and "break". + +test while-3.1 {break tests} { + set a {} + set i 1 + while {$i <= 4} { + if {$i == 3} break + set a [concat $a $i] + incr i + } + set a +} {1 2} +test while-3.2 {break tests, nested loops} { + set msg {} + set i 1 + while {$i <= 4} { + set a 1 + while {$a <= 2} { + if {$i>=2 && $a>=2} break + set msg [concat $msg "$i.$a"] + incr a + } + incr i + } + set msg +} {1.1 1.2 2.1 3.1 4.1} +test while-3.3 {break tests, long command body} { + set a {} + set i 1 + while {$i<6} { + if $i==2 {incr i; continue} + if $i==5 break + if $i>5 continue + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if $i==4 break + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + if {$i>6 && $tcl_platform(machine)=="xxx"} { + catch {set a $a} msg + catch {incr i 5} msg + catch {incr i -5} msg + } + set a [concat $a $i] + incr i + } + set a +} {1 3} + +# Check "while", "break", "continue" and computed command names. + +test while-4.1 {while and computed command names} { + set i 0 + set z while + $z {$i < 10} { + incr i + } + set i +} 10 + +test while-5.1 {break and computed command names} { + set i 0 + set z break + while 1 { + if {$i > 10} $z + incr i + } + set i +} 11 + +test while-6.1 {continue and computed command names} { + set i 0 + set z continue + while 1 { + incr i + if {$i < 10} $z + break + } + set i +} 10 diff --git a/tests/winFCmd.test b/tests/winFCmd.test new file mode 100644 index 0000000..a38d72f --- /dev/null +++ b/tests/winFCmd.test @@ -0,0 +1,979 @@ +# This file tests the tclWinFCmd.c file. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1996-1997 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) winFCmd.test 1.11 97/10/10 11:50:05 +# + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {$tcl_platform(platform) != "windows"} { + return +} + +proc createfile {file {string a}} { + set f [open $file w] + puts -nonewline $f $string + close $f + return $string +} + +proc contents {file} { + set f [open $file r] + set r [read $f] + close $f + set r +} + +proc cleanup {args} { + foreach p ". $args" { + set x "" + catch { + set x [glob [file join $p tf*] [file join $p td*]] + } + if {$x != ""} { + catch {eval file delete -force -- $x} + } + } +} + +set testConfig(cdrom) 0 +set testConfig(exdev) 0 +set testConfig(UNCPath} 0 + +# find a CD-ROM so we can test read-only filesystems. + +set cdrom {} +set nodrive x: +foreach p {d e f g h i j k l m n o p q r s t u v w x y z} { + set name ${p}:/dummy~~.fil + if [catch {set fd [open $name w]}] { + set err [lindex $errorCode 1] + if {$cdrom == "" && $err == "EACCES"} { + set cdrom ${p}: + } + if {$err == "ENOENT"} { + set nodrive ${p}: + } + } else { + close $fd + file delete $name + } +} + +proc findfile {dir} { + foreach p [glob $dir/*] { + if {[file type $p] == "file"} { + return $p + } + } + foreach p [glob $dir/*] { + if {[file type $p] == "directory"} { + set f [findfile $p] + if {$f != ""} { + return $f + } + } + } + return "" +} + +if {$cdrom == ""} { + puts "Couldn't find a CD-ROM. Skipping tests that access CD-ROM." + puts "If you have a CD-ROM, insert a data disk and rerun tests." +} else { + set testConfig(cdrom) 1 + set cdfile [findfile $cdrom] +} + +if {[file exists c:/] && [file exists d:/]} { + catch {file delete d:/tf1} + if {[catch {close [open d:/tf1 w]}] == 0} { + file delete d:/tf1 + set testConfig(exdev) 1 + } +} + +if {[file exists //bisque/icepick]} { + set testConfig(UNCPath) 1 +} + +file delete -force -- td1 +set foo [catch {open td1 w} testfile] +if {$foo} { + set testConfig(longFileNames) 0 +} else { + close $testfile + set testConfig(longFileNames) 1 + file delete -force -- td1 +} + +# A really long file name +# length of longname is 1216 chars, which should be greater than any static +# buffer or allowable filename. + +set longname "abcdefghihjllmnopqrstuvwxyz01234567890" +append longname $longname +append longname $longname +append longname $longname +append longname $longname +append longname $longname + +# Uses the "testfile" command instead of the "file" command. The "file" +# command provides several layers of sanity checks on the arguments and +# it can be difficult to actually forward "insane" arguments to the +# low-level posix emulation layer. + +test winFCmd-1.1 {TclpRenameFile: errno: EACCES} {cdrom} { + list [catch {testfile mv $cdfile $cdrom/dummy~~.fil} msg] $msg +} {1 EACCES} +test winFCmd-1.2 {TclpRenameFile: errno: EEXIST} { + cleanup + file mkdir td1/td2/td3 + file mkdir td2 + list [catch {testfile mv td2 td1/td2} msg] $msg +} {1 EEXIST} +test winFCmd-1.3 {TclpRenameFile: errno: EINVAL} {!$testConfig(win32s) || ("[lindex [file split [pwd]] end]" == "C:/")} { + # Don't run this test under Win32s on a drive mounted from an NT + # machine; it causes the NT machine to die. + + cleanup + list [catch {testfile mv / td1} msg] $msg +} {1 EINVAL} +test winFCmd-1.4 {TclpRenameFile: errno: EINVAL} { + cleanup + file mkdir td1 + list [catch {testfile mv td1 td1/td2} msg] $msg +} {1 EINVAL} +test winFCmd-1.5 {TclpRenameFile: errno: EISDIR} { + cleanup + file mkdir td1 + createfile tf1 + list [catch {testfile mv tf1 td1} msg] $msg +} {1 EISDIR} +test winFCmd-1.6 {TclpRenameFile: errno: ENOENT} { + cleanup + list [catch {testfile mv tf1 tf2} msg] $msg +} {1 ENOENT} +test winFCmd-1.7 {TclpRenameFile: errno: ENOENT} { + cleanup + list [catch {testfile mv "" tf2} msg] $msg +} {1 ENOENT} +test winFCmd-1.8 {TclpRenameFile: errno: ENOENT} { + cleanup + createfile tf1 + list [catch {testfile mv tf1 ""} msg] $msg +} {1 ENOENT} +test winFCmd-1.9 {TclpRenameFile: errno: ENOTDIR} { + cleanup + file mkdir td1 + createfile tf1 + list [catch {testfile mv td1 tf1} msg] $msg +} {1 ENOTDIR} +test winFCmd-1.10 {TclpRenameFile: errno: EXDEV} {exdev} { + file delete -force d:/tf1 + file mkdir c:/tf1 + set msg [list [catch {testfile mv c:/tf1 d:/tf1} msg] $msg] + file delete -force c:/tf1 + set msg +} {1 EXDEV} +test winFCmd-1.11 {TclpRenameFile: errno: EACCES} { + cleanup + set fd [open tf1 w] + set msg [list [catch {testfile mv tf1 tf2} msg] $msg] + close $fd + set msg +} {1 EACCES} +test winFCmd-1.12 {TclpRenameFile: errno: EACCES} { + cleanup + createfile tf1 + set fd [open tf2 w] + set msg [list [catch {testfile mv tf1 tf2} msg] $msg] + close $fd + set msg +} {1 EACCES} +test winFCmd-1.13 {TclpRenameFile: errno: EACCES} { + cleanup + list [catch {testfile mv nul tf1} msg] $msg +} {1 EACCES} +test winFCmd-1.14 {TclpRenameFile: errno: EACCES} {95} { + cleanup + createfile tf1 + list [catch {testfile mv tf1 nul} msg] $msg +} {1 EACCES} +test winFCmd-1.15 {TclpRenameFile: errno: EEXIST} {nt} { + cleanup + createfile tf1 + list [catch {testfile mv tf1 nul} msg] $msg +} {1 EEXIST} +test winFCmd-1.16 {TclpRenameFile: MoveFile() != FALSE} { + cleanup + createfile tf1 tf1 + testfile mv tf1 tf2 + list [file exists tf1] [contents tf2] +} {0 tf1} +test winFCmd-1.17 {TclpRenameFile: MoveFile() == FALSE} { + cleanup + list [catch {testfile mv tf1 tf2} msg] $msg +} {1 ENOENT} +test winFCmd-1.18 {TclpRenameFile: srcAttr == -1} { + cleanup + list [catch {testfile mv tf1 tf2} msg] $msg +} {1 ENOENT} +test winFCmd-1.19 {TclpRenameFile: errno == EACCES} { + cleanup + list [catch {testfile mv nul tf1} msg] $msg +} {1 EACCES} +# under 95, this would actually succed and move the current dir out from +# under yourself. +test winFCmd-1.20 {TclpRenameFile: src is dir} {!95} { + cleanup + file delete /tf1 + list [catch {testfile mv [pwd] /tf1} msg] $msg +} {1 EACCES} +test winFCmd-1.21 {TclpRenameFile: obscenely long src} {!win32s} { + # Really long file names cause all the file system calls to lock up, + # endlessly throwing an access violation and retrying the operation. + + list [catch {testfile mv $longname tf1} msg] $msg +} {1 ENAMETOOLONG} +test winFCmd-1.22 {TclpRenameFile: obscenely long dst} {nt} { + # return ENOENT if name is too long! + cleanup + createfile tf1 + list [catch {testfile mv tf1 $longname} msg] $msg +} {1 ENOENT} +test winFCmd-1.23 {TclpRenameFile: obscenely long dst} {95} { + cleanup + createfile tf1 + list [catch {testfile mv tf1 $longname} msg] $msg +} {1 ENAMETOOLONG} +test winFCmd-1.24 {TclpRenameFile: move dir into self} { + cleanup + file mkdir td1 + list [catch {testfile mv [pwd]/td1 td1/td2} msg] $msg +} {1 EINVAL} +test winFCmd-1.25 {TclpRenameFile: move a root dir} {!$testConfig(win32s) || ("[lindex [file split [pwd]] end]" == "C:/")} { + # Don't run this test under Win32s on a drive mounted from an NT + # machine; it causes the NT machine to die. + + cleanup + list [catch {testfile mv / c:/} msg] $msg +} {1 EINVAL} +test winFCmd-1.26 {TclpRenameFile: cross file systems} {cdrom} { + cleanup + file mkdir td1 + list [catch {testfile mv td1 $cdrom/td1} msg] $msg +} {1 EXDEV} +test winFCmd-1.27 {TclpRenameFile: readonly fs} {cdrom} { + cleanup + list [catch {testfile mv $cdfile $cdrom/dummy~~.fil} msg] $msg +} {1 EACCES} +test winFCmd-1.28 {TclpRenameFile: open file} { + cleanup + set fd [open tf1 w] + set msg [list [catch {testfile mv tf1 tf2} msg] $msg] + close $fd + set msg +} {1 EACCES} +test winFCmd-1.29 {TclpRenameFile: errno == EEXIST} { + cleanup + createfile tf1 + createfile tf2 + testfile mv tf1 tf2 + list [file exist tf1] [file exist tf2] +} {0 1} +test winFCmd-1.30 {TclpRenameFile: src is dir} { + cleanup + file mkdir td1 + createfile tf1 + list [catch {testfile mv td1 tf1} msg] $msg +} {1 ENOTDIR} +test winFCmd-1.31 {TclpRenameFile: dst is dir} { + cleanup + file mkdir td1 + file mkdir td2/td2 + list [catch {testfile mv td1 td2} msg] $msg +} {1 EEXIST} +test winFCmd-1.32 {TclpRenameFile: TclpRemoveDirectory fails} { + cleanup + file mkdir td1 + file mkdir td2/td2 + list [catch {testfile mv td1 td2} msg] $msg +} {1 EEXIST} +test winFCmd-1.33 {TclpRenameFile: TclpRemoveDirectory succeeds} { + cleanup + file mkdir td1/td2 + file mkdir td2 + testfile mv td1 td2 + list [file exist td1] [file exist td2] [file exist td2/td2] +} {0 1 1} +test winFCmd-1.34 {TclpRenameFile: After removing dst dir, MoveFile fails} {exdev} { + file mkdir d:/td1 + testchmod 000 d:/td1 + set msg [list [catch {testfile mv c:/windows d:/td1} msg] $msg] + set msg "$msg [file writable d:/td1]" + file delete d:/td1 + set msg +} {1 EXDEV 0} +test winFCmd-1.35 {TclpRenameFile: src is dir, dst is not} { + file mkdir td1 + createfile tf1 + list [catch {testfile mv td1 tf1} msg] $msg +} {1 ENOTDIR} +test winFCmd-1.36 {TclpRenameFile: src is not dir, dst is} { + file mkdir td1 + createfile tf1 + list [catch {testfile mv tf1 td1} msg] $msg +} {1 EISDIR} +test winFCmd-1.37 {TclpRenameFile: src and dst not dir} { + createfile tf1 tf1 + createfile tf2 tf2 + testfile mv tf1 tf2 + contents tf2 +} {tf1} +test winFCmd-1.38 {TclpRenameFile: need to restore temp file} { + # Can't figure out how to cause this. + # Need a file that can't be copied. +} {} + +test winFCmd-2.1 {TclpCopyFile: errno: EACCES} {cdrom} { + cleanup + list [catch {testfile cp $cdfile $cdrom/dummy~~.fil} msg] $msg +} {1 EACCES} +test winFCmd-2.2 {TclpCopyFile: errno: EISDIR} { + cleanup + file mkdir td1 + list [catch {testfile cp td1 tf1} msg] $msg +} {1 EISDIR} +test winFCmd-2.3 {TclpCopyFile: errno: EISDIR} { + cleanup + createfile tf1 + file mkdir td1 + list [catch {testfile cp tf1 td1} msg] $msg +} {1 EISDIR} +test winFCmd-2.4 {TclpCopyFile: errno: ENOENT} { + cleanup + list [catch {testfile cp tf1 tf2} msg] $msg +} {1 ENOENT} +test winFCmd-2.5 {TclpCopyFile: errno: ENOENT} { + cleanup + list [catch {testfile cp "" tf2} msg] $msg +} {1 ENOENT} +test winFCmd-2.6 {TclpCopyFile: errno: ENOENT} { + cleanup + createfile tf1 + list [catch {testfile cp tf1 ""} msg] $msg +} {1 ENOENT} +test winFCmd-2.7 {TclpCopyFile: errno: EACCES} {!nt} { + cleanup + createfile tf1 + set fd [open tf2 w] + set msg [list [catch {testfile cp tf1 tf2} msg] $msg] + close $fd + set msg +} {1 EACCES} +test winFCmd-2.8 {TclpCopyFile: errno: EACCES} {nt} { + cleanup + list [catch {testfile cp nul tf1} msg] $msg +} {1 EACCES} +test winFCmd-2.9 {TclpCopyFile: errno: ENOENT} {95} { + cleanup + list [catch {testfile cp nul tf1} msg] $msg +} {1 ENOENT} +test winFCmd-2.10 {TclpCopyFile: CopyFile succeeds} { + cleanup + createfile tf1 tf1 + testfile cp tf1 tf2 + list [contents tf1] [contents tf2] +} {tf1 tf1} +test winFCmd-2.11 {TclpCopyFile: CopyFile succeeds} { + cleanup + createfile tf1 tf1 + createfile tf2 tf2 + testfile cp tf1 tf2 + list [contents tf1] [contents tf2] +} {tf1 tf1} +test winFCmd-2.12 {TclpCopyFile: CopyFile succeeds} { + cleanup + createfile tf1 tf1 + testchmod 000 tf1 + testfile cp tf1 tf2 + list [contents tf2] [file writable tf2] +} {tf1 0} +test winFCmd-2.13 {TclpCopyFile: CopyFile fails} { + cleanup + createfile tf1 + file mkdir td1 + list [catch {testfile cp tf1 td1} msg] $msg +} {1 EISDIR} +test winFCmd-2.14 {TclpCopyFile: errno == EACCES} { + cleanup + file mkdir td1 + list [catch {testfile cp td1 tf1} msg] $msg +} {1 EISDIR} +test winFCmd-2.15 {TclpCopyFile: src is directory} { + cleanup + file mkdir td1 + list [catch {testfile cp td1 tf1} msg] $msg +} {1 EISDIR} +test winFCmd-2.16 {TclpCopyFile: dst is directory} { + cleanup + createfile tf1 + file mkdir td1 + list [catch {testfile cp tf1 td1} msg] $msg +} {1 EISDIR} +test winFCmd-2.17 {TclpCopyFile: dst is readonly} { + cleanup + createfile tf1 tf1 + createfile tf2 tf2 + testchmod 000 tf2 + testfile cp tf1 tf2 + list [file writable tf2] [contents tf2] +} {1 tf1} +test winFCmd-2.18 {TclpCopyFile: still can't copy onto dst} {95} { + cleanup + createfile tf1 + createfile tf2 + testchmod 000 tf2 + set fd [open tf2] + set msg [list [catch {testfile cp tf1 tf2} msg] $msg] + close $fd + set msg "$msg [file writable tf2]" +} {1 EACCES 0} + +test winFCmd-3.1 {TclpDeleteFile: errno: EACCES} {cdrom} { + list [catch {testfile rm $cdfile $cdrom/dummy~~.fil} msg] $msg +} {1 EACCES} +test winFCmd-3.2 {TclpDeleteFile: errno: EISDIR} { + cleanup + file mkdir td1 + list [catch {testfile rm td1} msg] $msg +} {1 EISDIR} +test winFCmd-3.3 {TclpDeleteFile: errno: ENOENT} { + cleanup + list [catch {testfile rm tf1} msg] $msg +} {1 ENOENT} +test winFCmd-3.4 {TclpDeleteFile: errno: ENOENT} { + cleanup + list [catch {testfile rm ""} msg] $msg +} {1 ENOENT} +test winFCmd-3.5 {TclpDeleteFile: errno: EACCES} { + cleanup + set fd [open tf1 w] + set msg [list [catch {testfile rm tf1} msg] $msg] + close $fd + set msg +} {1 EACCES} +test winFCmd-3.6 {TclpDeleteFile: errno: EACCES} { + cleanup + list [catch {testfile rm nul} msg] $msg +} {1 EACCES} +test winFCmd-3.7 {TclpDeleteFile: DeleteFile succeeds} { + cleanup + createfile tf1 + testfile rm tf1 + file exist tf1 +} {0} +test winFCmd-3.8 {TclpDeleteFile: DeleteFile fails} { + cleanup + file mkdir td1 + list [catch {testfile rm td1} msg] $msg +} {1 EISDIR} +test winFCmd-3.9 {TclpDeleteFile: errno == EACCES} { + cleanup + set fd [open tf1 w] + set msg [list [catch {testfile rm tf1} msg] $msg] + close $fd + set msg +} {1 EACCES} +test winFCmd-3.10 {TclpDeleteFile: path is readonly} { + cleanup + createfile tf1 + testchmod 000 tf1 + testfile rm tf1 + file exists tf1 +} {0} +test winFCmd-3.11 {TclpDeleteFile: still can't remove path} { + cleanup + set fd [open tf1 w] + testchmod 000 tf1 + set msg [list [catch {testfile rm tf1} msg] $msg] + close $fd + set msg +} {1 EACCES} + +test winFCmd-4.1 {TclpCreateDirectory: errno: EACCES} {cdrom nt} { + list [catch {testfile mkdir $cdrom/dummy~~.dir} msg] $msg +} {1 EACCES} +test winFCmd-4.2 {TclpCreateDirectory: errno: EACCES} {cdrom 95} { + list [catch {testfile mkdir $cdrom/dummy~~.dir} msg] $msg +} {1 ENOSPC} +test winFCmd-4.3 {TclpCreateDirectory: errno: EEXIST} { + cleanup + file mkdir td1 + list [catch {testfile mkdir td1} msg] $msg +} {1 EEXIST} +test winFCmd-4.4 {TclpCreateDirectory: errno: ENOENT} { + cleanup + list [catch {testfile mkdir td1/td2} msg] $msg +} {1 ENOENT} +test winFCmd-4.5 {TclpCreateDirectory: CreateDirectory succeeds} { + cleanup + testfile mkdir td1 + file type td1 +} {directory} + +test winFCmd-5.1 {TclpCopyDirectory: calls TraverseWinTree} { + cleanup + file mkdir td1 + testfile cpdir td1 td2 + list [file type td1] [file type td2] +} {directory directory} + +test winFCmd-6.1 {TclpRemoveDirectory: errno: EACCES} { + cleanup + file mkdir td1 + testchmod 000 td1 + testfile rmdir td1 + file exist td1 +} {0} +test winFCmd-6.2 {TclpRemoveDirectory: errno: EEXIST} { + cleanup + file mkdir td1/td2 + list [catch {testfile rmdir td1} msg] $msg +} {1 {td1 EEXIST}} +test winFCmd-6.3 {TclpRemoveDirectory: errno: EACCES} { + # can't test this w/o removing everything on your hard disk first! + # testfile rmdir / +} {} +test winFCmd-6.4 {TclpRemoveDirectory: errno: ENOENT} { + cleanup + list [catch {testfile rmdir td1} msg] $msg +} {1 {td1 ENOENT}} +test winFCmd-6.5 {TclpRemoveDirectory: errno: ENOENT} { + cleanup + list [catch {testfile rmdir ""} msg] $msg +} {1 ENOENT} +test winFCmd-6.6 {TclpRemoveDirectory: errno: ENOTDIR} { + cleanup + createfile tf1 + list [catch {testfile rmdir tf1} msg] $msg +} {1 {tf1 ENOTDIR}} +test winFCmd-6.7 {TclpRemoveDirectory: RemoveDirectory succeeds} { + cleanup + file mkdir td1 + testfile rmdir td1 + file exists td1 +} {0} +test winFCmd-6.8 {TclpRemoveDirectory: RemoveDirectory fails} { + cleanup + createfile tf1 + list [catch {testfile rmdir tf1} msg] $msg +} {1 {tf1 ENOTDIR}} +test winFCmd-6.9 {TclpRemoveDirectory: errno == EACCES} { + cleanup + file mkdir td1 + testchmod 000 td1 + testfile rmdir td1 + file exists td1 +} {0} +test winFCmd-6.10 {TclpRemoveDirectory: attr == -1} {!nt} { + cleanup + list [catch {testfile rmdir nul} msg] $msg +} {1 {nul EACCES}} +test winFCmd-6.11 {TclpRemoveDirectory: attr == -1} {nt} { + cleanup + list [catch {testfile rmdir /} msg] $msg +} {1 {\ EACCES}} +test winFCmd-6.12 {TclpRemoveDirectory: errno == EACCES} {!nt} { + cleanup + createfile tf1 + list [catch {testfile rmdir tf1} msg] $msg +} {1 {tf1 ENOTDIR}} +test winFCmd-6.13 {TclpRemoveDirectory: write-protected} { + cleanup + file mkdir td1 + testchmod 000 td1 + testfile rmdir td1 + file exists td1 +} {0} +test winFCmd-6.14 {TclpRemoveDirectory: check if empty dir} {!nt} { + cleanup + file mkdir td1/td2 + list [catch {testfile rmdir td1} msg] $msg +} {1 {td1 EEXIST}} +test winFCmd-6.15 {TclpRemoveDirectory: !recursive} { + cleanup + file mkdir td1/td2 + list [catch {testfile rmdir td1} msg] $msg +} {1 {td1 EEXIST}} +test winFCmd-6.16 {TclpRemoveDirectory: recursive, but errno != EEXIST} { + cleanup + createfile tf1 + list [catch {testfile rmdir -force tf1} msg] $msg +} {1 {tf1 ENOTDIR}} +test winFCmd-6.17 {TclpRemoveDirectory: calls TraverseWinTree} { + cleanup + file mkdir td1/td2 + testfile rmdir -force td1 + file exists td1 +} {0} + +test winFCmd-7.1 {TraverseWinTree: targetPtr == NULL} { + cleanup + file mkdir td1/td2/td3 + testfile rmdir -force td1 + file exists td1 +} {0} +test winFCmd-7.2 {TraverseWinTree: targetPtr != NULL} { + cleanup + file mkdir td1/td2/td3 + testfile cpdir td1 td2 + list [file exists td1] [file exists td2] +} {1 1} +test winFCmd-7.3 {TraverseWinTree: sourceAttr == -1} { + cleanup + list [catch {testfile cpdir td1 td2} msg] $msg +} {1 {td1 ENOENT}} +test winFCmd-7.4 {TraverseWinTree: source isn't directory} { + cleanup + file mkdir td1 + createfile td1/tf1 tf1 + testfile cpdir td1 td2 + contents td2/tf1 +} {tf1} +test winFCmd-7.5 {TraverseWinTree: call TraversalCopy: DOTREE_F} { + cleanup + file mkdir td1 + createfile td1/tf1 tf1 + testfile cpdir td1 td2 + contents td2/tf1 +} {tf1} +test winFCmd-7.6 {TraverseWinTree: call TraversalDelete: DOTREE_F} { + cleanup + file mkdir td1 + createfile td1/tf1 tf1 + testfile rmdir -force td1 + file exists td1 +} {0} +test winFCmd-7.7 {TraverseWinTree: append \ to source if necessary} { + cleanup + file mkdir td1 + createfile td1/tf1 tf1 + testfile cpdir td1 td2 + contents td2/tf1 +} {tf1} +test winFCmd-7.8 {TraverseWinTree: append \ to source if necessary} {!nt && cdrom} { + list [catch {testfile rmdir $cdrom/} msg] $msg +} "1 {$cdrom\\ EEXIST}" +test winFCmd-7.9 {TraverseWinTree: append \ to source if necessary} {nt cdrom} { + list [catch {testfile rmdir $cdrom/} msg] $msg +} "1 {$cdrom\\ EACCES}" +test winFCmd-7.10 {TraverseWinTree: can't read directory: handle == INVALID} { + # can't make it happen +} {} +test winFCmd-7.11 {TraverseWinTree: call TraversalCopy: DOTREE_PRED} { + cleanup + file mkdir td1 + testchmod 000 td1 + createfile td1/tf1 tf1 + testfile cpdir td1 td2 + list [file exists td2] [file writable td2] +} {1 0} +test winFCmd-7.12 {TraverseWinTree: call TraversalDelete: DOTREE_PRED} { + cleanup + file mkdir td1 + createfile td1/tf1 tf1 + testfile rmdir -force td1 + file exists td1 +} {0} +test winFCmd-7.13 {TraverseWinTree: append \ to target if necessary} { + cleanup + file mkdir td1 + createfile td1/tf1 tf1 + testfile cpdir td1 td2 + contents td2/tf1 +} {tf1} +test winFCmd-7.14 {TraverseWinTree: append \ to target if necessary} {!nt} { + cleanup + file mkdir td1 + list [catch {testfile cpdir td1 /} msg] $msg +} {1 {\ EEXIST}} +test winFCmd-7.15 {TraverseWinTree: append \ to target if necessary} {nt} { + cleanup + file mkdir td1 + list [catch {testfile cpdir td1 /} msg] $msg +} {1 {\ EACCES}} +test winFCmd-7.16 {TraverseWinTree: recurse on files: no files} { + cleanup + file mkdir td1 + testfile cpdir td1 td2 +} {} +test winFCmd-7.17 {TraverseWinTree: recurse on files: one file} { + cleanup + file mkdir td1 + createfile td1/td2 + testfile cpdir td1 td2 + glob td2/* +} {td2/td2} +test winFCmd-7.18 {TraverseWinTree: recurse on files: several files and dir} { + cleanup + file mkdir td1 + createfile td1/tf1 + createfile td1/tf2 + file mkdir td1/td2/td3 + createfile td1/tf3 + createfile td1/tf4 + testfile cpdir td1 td2 + glob td2/* +} {td2/tf1 td2/tf2 td2/td2 td2/tf3 td2/tf4} +test winFCmd-7.19 {TraverseWinTree: call TraversalCopy: DOTREE_POSTD} { + cleanup + file mkdir td1 + testchmod 000 td1 + createfile td1/tf1 tf1 + testfile cpdir td1 td2 + list [file exists td2] [file writable td2] +} {1 0} +test winFCmd-7.20 {TraverseWinTree: call TraversalDelete: DOTREE_POSTD} { + cleanup + file mkdir td1 + createfile td1/tf1 tf1 + testfile rmdir -force td1 + file exists td1 +} {0} +test winFCmd-7.21 {TraverseWinTree: fill errorPtr} { + cleanup + list [catch {testfile cpdir td1 td2} msg] $msg +} {1 {td1 ENOENT}} + +test winFCmd-8.1 {TraversalCopy: DOTREE_F} { + cleanup + file mkdir td1 + list [catch {testfile cpdir td1 td1} msg] $msg +} {1 {td1 EEXIST}} +test winFCmd-8.2 {TraversalCopy: DOTREE_PRED} { + cleanup + file mkdir td1/td2 + testchmod 000 td1 + testfile cpdir td1 td2 + list [file writable td1] [file writable td1/td2] +} {0 1} +test winFCmd-8.3 {TraversalCopy: DOTREE_POSTD} { + cleanup + file mkdir td1 + testfile cpdir td1 td2 +} {} + +test winFCmd-9.1 {TraversalDelete: DOTREE_F} { + cleanup + file mkdir td1 + createfile td1/tf1 + testfile rmdir -force td1 +} {} +test winFCmd-9.2 {TraversalDelete: DOTREE_F} {95} { + cleanup + file mkdir td1 + set fd [open td1/tf1 w] + set msg [list [catch {testfile rmdir -force td1} msg] $msg] + close $fd + set msg +} {1 {td1\tf1 EACCES}} +test winFCmd-9.3 {TraversalDelete: DOTREE_PRED} { + cleanup + file mkdir td1/td2 + testchmod 000 td1 + testfile rmdir -force td1 + file exists td1 +} {0} +test winFCmd-9.4 {TraversalDelete: DOTREE_POSTD} { + cleanup + file mkdir td1/td1/td3/td4/td5 + testfile rmdir -force td1 +} {} + +test winFCmd-10.1 {AttributesPosixError - get} { + cleanup + list [catch {file attributes td1 -archive} msg] $msg +} {1 {cannot get attribute "-archive" for file "td1": no such file or directory}} +test winFCmd-10.2 {AttributesPosixError - set} { + cleanup + list [catch {file attributes td1 -archive 0} msg] $msg +} {1 {cannot set attribute "-archive" for file "td1": no such file or directory}} + +test winFCmd-11.1 {GetWinFileAttributes} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -archive} msg] $msg [cleanup] +} {0 1 {}} +test winFCmd-11.2 {GetWinFileAttributes} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -readonly} msg] $msg [cleanup] +} {0 0 {}} +test winFCmd-11.3 {GetWinFileAttributes} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -hidden} msg] $msg [cleanup] +} {0 0 {}} +test winFCmd-11.4 {GetWinFileAttributes} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -system} msg] $msg [cleanup] +} {0 0 {}} + +test winFCmd-12.1 {ConvertFileNameFormat} { + cleanup + close [open td1 w] + list [catch {string tolower [file attributes td1 -longname]} msg] $msg [cleanup] +} {0 td1 {}} +test winFCmd-12.2 {ConvertFileNameFormat} { + cleanup + file mkdir td1 + close [open td1/td1 w] + list [catch {string tolower [file attributes td1/td1 -longname]} msg] $msg [cleanup] +} {0 td1/td1 {}} +test winFCmd-12.3 {ConvertFileNameFormat} { + cleanup + file mkdir td1 + file mkdir td1/td2 + close [open td1/td3 w] + list [catch {string tolower [file attributes td1/td2/../td3 -longname]} msg] $msg [cleanup] +} {0 td1/td2/../td3 {}} +test winFCmd-12.4 {ConvertFileNameFormat} { + cleanup + close [open td1 w] + list [catch {string tolower [file attributes ./td1 -longname]} msg] $msg [cleanup] +} {0 ./td1 {}} +test winFCmd-12.5 {ConvertFileNameFormat: absolute path} { + list [file attributes / -longname] [file attributes \\ -longname] +} {/ /} +test winFCmd-12.6 {ConvertFileNameFormat: absolute path with drive} { + catch {file delete -force -- c:/td1} + close [open c:/td1 w] + list [catch {string tolower [file attributes c:/td1 -longname]} msg] $msg [file delete -force -- c:/td1] +} {0 c:/td1 {}} +test winFCmd-12.7 {ConvertFileNameFormat} {UNCPath} { + catch {file delete -force -- //bisque/icepick/test/td1} + close [open //bisque/icepick/test/td1 w] + list [catch {string tolower [file attributes //bisque/icepick/test/td1 -longname]} msg] $msg [file delete -force -- //bisque/icepick/test/td1] +} {0 //bisque/icepick/test/td1 {}} +test winFCmd-12.8 {ConvertFileNameFormat} {longFileNames} { + cleanup + close [open td1 w] + list [catch {string tolower [file attributes td1 -longname]} msg] $msg [cleanup] +} {0 td1 {}} +test winFCmd-12.9 {ConvertFileNameFormat} {win32s} { + cleanup + close [open td1 w] + list [catch {string tolower [file attributes td1 -longname]} msg] $msg [cleanup] +} {0 td1 {}} +test winFCmd-12.10 {ConvertFileNameFormat} {longFileNames} { + cleanup + close [open td1td1td1 w] + list [catch {file attributes td1td1td1 -shortname}] [cleanup] +} {0 {}} +test winFCmd-12.11 {ConvertFileNameFormat} {longFileNames} { + cleanup + close [open td1 w] + list [catch {string tolower [file attributes td1 -shortname]} msg] $msg [cleanup] +} {0 td1 {}} + +test winFCmd-13.1 {GetWinFileLongName} { + cleanup + close [open td1 w] + list [catch {string tolower [file attributes td1 -longname]} msg] $msg [cleanup] +} {0 td1 {}} + +test winFCmd-14.1 {GetWinFileShortName} { + cleanup + close [open td1 w] + list [catch {string tolower [file attributes td1 -shortname]} msg] $msg [cleanup] +} {0 td1 {}} + +test winFCmd-15.1 {SetWinFileAttributes} { + cleanup + list [catch {file attributes td1 -archive 0} msg] $msg +} {1 {cannot set attribute "-archive" for file "td1": no such file or directory}} +test winFCmd-15.2 {SetWinFileAttributes - archive} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -archive 1} msg] $msg [file attributes td1 -archive] [cleanup] +} {0 {} 1 {}} +test winFCmd-15.3 {SetWinFileAttributes - archive} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -archive 0} msg] $msg [file attributes td1 -archive] [cleanup] +} {0 {} 0 {}} +test winFCmd-15.4 {SetWinFileAttributes - hidden} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -hidden 1} msg] $msg [file attributes td1 -hidden] [file attributes td1 -hidden 0] [cleanup] +} {0 {} 1 {} {}} +test winFCmd-15.5 {SetWinFileAttributes - hidden} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -hidden 0} msg] $msg [file attributes td1 -hidden] [cleanup] +} {0 {} 0 {}} +test winFCmd-15.6 {SetWinFileAttributes - readonly} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -readonly 1} msg] $msg [file attributes td1 -readonly] [cleanup] +} {0 {} 1 {}} +test winFCmd-15.7 {SetWinFileAttributes - readonly} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -readonly 0} msg] $msg [file attributes td1 -readonly] [cleanup] +} {0 {} 0 {}} +test winFCmd-15.8 {SetWinFileAttributes - system} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -system 1} msg] $msg [file attributes td1 -system] [cleanup] +} {0 {} 1 {}} +test winFCmd-15.9 {SetWinFileAttributes - system} { + cleanup + close [open td1 w] + list [catch {file attributes td1 -system 0} msg] $msg [file attributes td1 -system] [cleanup] +} {0 {} 0 {}} +test winFCmd-15.10 {SetWinFileAttributes - failing} {cdrom} { + cleanup + catch {file attributes $cdfile -archive 1} +} {1} + +cleanup + +return + +foreach source {tef ted tnf tnd "" nul com1} { + foreach chmodsrc {000 755} { + foreach dest "tfn tfe tdn tdempty tdfull td1/td2 $p $p/td1 {} nul" { + foreach chmoddst {000 755} { + puts hi + cleanup + file delete -force ted tef + file mkdir ted + createfile tef + createfile tfe + file mkdir tdempty + file mkdir tdfull/td1/td2 + + catch {testchmod $chmodsrc $source} + catch {testchmod $chmoddst $dest} + + if [catch {file rename $source $dest} msg] { + puts "file rename $source ($chmodsrc) $dest ($chmoddst)" + puts $msg + } + } + } + } +} + diff --git a/tests/winNotify.test b/tests/winNotify.test new file mode 100644 index 0000000..2914a41 --- /dev/null +++ b/tests/winNotify.test @@ -0,0 +1,155 @@ +# This file tests the tclWinNotify.c file. +# +# This file contains a collection of tests for one or more of the Tcl +# built-in commands. Sourcing this file into Tcl runs the tests and +# generates output for errors. No output means no errors were found. +# +# Copyright (c) 1997 by Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) winNotify.test 1.2 97/04/14 17:24:56 + +if {[string compare test [info procs test]] == 1} then {source defs} + +if {$tcl_platform(platform) != "windows"} { + return +} + +# There is no explicit test for InitNotifier or NotifierExitHandler + +test winNotify-1.1 {Tcl_SetTimer: positive timeout} { + set done 0 + after 1000 { set done 1 } + vwait done + set done +} 1 +test winNotify-1.2 {Tcl_SetTimer: positive timeout, message pending} { + set x 0 + set y 1 + set a1 [after 0 { incr y }] + after cancel $a1 + after 500 { incr x } + vwait x + list $x $y +} {1 1} +test winNotify-1.3 {Tcl_SetTimer: cancelling positive timeout} { + set x 0 + set y 1 + set id [after 10000 { incr y }] + after 0 { incr x } + vwait x + after cancel $id + list $x $y +} {1 1} +test winNotify-1.4 {Tcl_SetTimer: null timeout, message pending} { + set x 0 + set y 1 + after 0 { incr x } + after 0 { incr y } + vwait x + list $x $y +} {1 2} + +test winNotify-2.1 {Tcl_ResetIdleTimer} { + set x 0 + update + after idle { incr x } + vwait x + set x +} 1 +test winNotify-2.2 {Tcl_ResetIdleTimer: message pending} { + set x 0 + set y 1 + update + after idle { incr x } + after idle { incr y } + update + list $x $y +} {1 2} + +test winNotify-3.1 {NotifierProc: non-modal normal timer} { + update + set x 0 + foreach i [after info] { + after cancel $i + } + after 500 { incr x; testeventloop done } + testeventloop wait + set x +} 1 +test winNotify-3.2 {NotifierProc: non-modal normal timer, rescheduled} { + update + set x 0 + foreach i [after info] { + after cancel $i + } + after 500 { incr x; after 100 {incr x; testeventloop done }} + testeventloop wait + set x +} 2 +test winNotify-3.3 {NotifierProc: modal normal timer} { + update + set x 0 + foreach i [after info] { + after cancel $i + } + after 500 { incr x } + vwait x + set x +} 1 +test winNotify-3.4 {NotifierProc: modal normal timer, rescheduled} { + update + set x 0 + foreach i [after info] { + after cancel $i + } + set y 0 + after 500 { incr y; after 100 {incr x}} + vwait x + list $x $y +} {1 1} +test winNotify-3.5 {NotifierProc: non-modal idle timer} { + update + set x 0 + foreach i [after info] { + after cancel $i + } + after idle { incr x; testeventloop done } + testeventloop wait + set x +} 1 +test winNotify-3.6 {NotifierProc: non-modal idle timer, rescheduled} { + update + set x 0 + foreach i [after info] { + after cancel $i + } + after idle { incr x; after idle {incr x; testeventloop done }} + testeventloop wait + set x +} 2 +test winNotify-3.7 {NotifierProc: modal idle timer} { + update + set x 0 + foreach i [after info] { + after cancel $i + } + after idle { incr x } + vwait x + set x +} 1 +test winNotify-3.8 {NotifierProc: modal idle timer, rescheduled} { + update + set x 0 + foreach i [after info] { + after cancel $i + } + set y 0 + after idle { incr y; after idle {incr x}} + vwait x + list $x $y +} {1 1} + +# Tcl_DoOneEvent is tested by the timer.test, io.test, and event.test files diff --git a/tests/winPipe.test b/tests/winPipe.test new file mode 100644 index 0000000..404251f --- /dev/null +++ b/tests/winPipe.test @@ -0,0 +1,359 @@ +# +# winPipe.test -- +# +# This file contains a collection of tests for tclWinPipe.c + +# Sourcing this file into Tcl runs the tests and generates output for +# errors. No output means no errors were found. +# +# Copyright (c) 1996 Sun Microsystems, Inc. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# SCCS: @(#) winPipe.test 1.11 97/10/09 17:06:16 + +if {$tcl_platform(platform) != "windows"} { + return +} + +set cat16 [file join $tcl_library ../win/cat16.exe] +set cat32 [file join $tcl_library ../win/cat32.exe] + +if {[string compare test [info procs test]] == 1} then {source defs} + +if [catch {puts console1 ""}] { + set testConfig(AllocConsole) 1 +} else { + set testConfig(.console) 1 +} + +set big aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\n +append big $big +append big $big +append big $big +append big $big +append big $big +append big $big + +set f [open "little" w] +puts -nonewline $f "little" +close $f + +set f [open "big" w] +puts -nonewline $f $big +close $f + +proc contents {file} { + set f [open $file r] + set r [read $f] + close $f + set r +} + +if {$testConfig(stdio) && [file exists $cat32]} { +test winpipe-1.1 {32 bit comprehensive tests: from little file} { + exec $cat32 < little > stdout 2> stderr + list [contents stdout] [contents stderr] +} "little stderr32" +test winpipe-1.2 {32 bit comprehensive tests: from big file} { + exec $cat32 < big > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{$big} stderr32" +test winpipe-1.3 {32 bit comprehensive tests: a little from pipe} {nt} { + exec more < little | $cat32 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{little\n} stderr32" +test winpipe-1.4 {32 bit comprehensive tests: a little from pipe} {95} { + exec more < little |& $cat32 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{\nlittle} stderr32" +test winpipe-1.5 {32 bit comprehensive tests: a lot from pipe} {nt} { + exec more < big | $cat32 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{$big} stderr32" +test winpipe-1.6 {32 bit comprehensive tests: a lot from pipe} {95} { + exec command /c type big |& $cat32 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{$big} stderr32" +test winpipe-1.7 {32 bit comprehensive tests: from console} {AllocConsole} { + # would block waiting for human input +} {} +test winpipe-1.8 {32 bit comprehensive tests: from NUL} { + exec $cat32 < nul > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{} stderr32" +test winpipe-1.9 {32 bit comprehensive tests: from socket} { + # doesn't work +} {} +test winpipe-1.10 {32 bit comprehensive tests: from nowhere} {.console} { + exec $cat32 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{} stderr32" +test winpipe-1.11 {32 bit comprehensive tests: from file handle} { + set f [open "little" r] + exec $cat32 <@$f > stdout 2> stderr + close $f + list [contents stdout] [contents stderr] +} "little stderr32" +test winpipe-1.12 {32 bit comprehensive tests: read from application} { + set f [open "|$cat32 < little" r] + gets $f line + catch {close $f} msg + list $line $msg +} "little stderr32" +test winpipe-1.13 {32 bit comprehensive tests: a little to file} { + exec $cat32 < little > stdout 2> stderr + list [contents stdout] [contents stderr] +} "little stderr32" +test winpipe-1.14 {32 bit comprehensive tests: a lot to file} { + exec $cat32 < big > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{$big} stderr32" +test winpipe-1.15 {32 bit comprehensive tests: a little to pipe} {nt} { + exec $cat32 < little | more > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{little\n} stderr32" +test winpipe-1.16 {32 bit comprehensive tests: a little to pipe} {95} { + exec $cat32 < little | more > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{\nlittle} stderr32" +test winpipe-1.17 {32 bit comprehensive tests: a lot to pipe} {nt} { + exec $cat32 < big | more > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{$big\n} stderr32" +test winpipe-1.18 {32 bit comprehensive tests: a lot to pipe} {95} { + exec $cat32 < big | more > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{\n$big} stderr32" +test winpipe-1.19 {32 bit comprehensive tests: to console} { + catch {exec $cat32 << "You should see this\n" >@stdout} msg + set msg +} stderr32 +test winpipe-1.20 {32 bit comprehensive tests: to NUL} { + # some apps hang when sending a large amount to NUL. $cat32 isn't one. + catch {exec $cat32 < big > nul} msg + set msg +} stderr32 +test winpipe-1.21 {32 bit comprehensive tests: to nowhere} {.console} { + exec $cat32 < big >&@stdout +} {} +test winpipe-1.22 {32 bit comprehensive tests: to file handle} { + set f1 [open "stdout" w] + set f2 [open "stderr" w] + exec $cat32 < little >@$f1 2>@$f2 + close $f1 + close $f2 + list [contents stdout] [contents stderr] +} "little stderr32" +test winpipe-1.23 {32 bit comprehensive tests: write to application} { + set f [open "|$cat32 > stdout" w] + puts -nonewline $f "foo" + catch {close $f} msg + list [contents stdout] $msg +} "foo stderr32" +test winpipe-1.24 {32 bit comprehensive tests: read/write application} { + set f [open "|$cat32" r+] + puts $f $big + puts $f \032 + flush $f + set r [read $f 64] + catch {close $f} + set r +} "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" +} + +set stderr16 "stderr16" +if {$tcl_platform(os) == "Win32s"} { + set stderr16 "{}" +} +if [file exists $cat16] { +test winpipe-2.1 {16 bit comprehensive tests: from little file} { + exec $cat16 < little > stdout 2> stderr + list [contents stdout] [contents stderr] +} "little $stderr16" +test winpipe-2.2 {16 bit comprehensive tests: from big file} { + exec $cat16 < big > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{$big} $stderr16" +test winpipe-2.3 {16 bit comprehensive tests: a little from pipe} {nt} { + exec more < little | $cat16 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{little\n} stderr16" +test winpipe-2.4 {16 bit comprehensive tests: a little from pipe} {95} { + exec more < little | $cat16 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{\nlittle} stderr16" +test winpipe-2.5 {16 bit comprehensive tests: a lot from pipe} {nt} { + exec $cat16 < big | $cat16 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{$big} stderr16stderr16" +test winpipe-2.6 {16 bit comprehensive tests: a lot from pipe} {95} { + exec more < big | $cat16 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{\n$big} stderr16" +test winpipe-2.7 {16 bit comprehensive tests: from console} {AllocConsole} { + # would block waiting for human input +} {} +test winpipe-2.8 {16 bit comprehensive tests: from NUL} {nt} { + exec $cat16 < nul > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{} stderr16" +test winpipe-2.9 {16 bit comprehensive tests: from socket} { + # doesn't work +} {} +test winpipe-2.10 {16 bit comprehensive tests: from nowhere} {.console} { + exec $cat16 > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{} stderr16" +test winpipe-2.11 {16 bit comprehensive tests: from file handle} { + set f [open "little" r] + exec $cat16 <@$f > stdout 2> stderr + close $f + list [contents stdout] [contents stderr] +} "little $stderr16" +test winpipe-2.12 {16 bit comprehensive tests: read from application} { + set f [open "|$cat16 < little" r] + gets $f line + catch {close $f} msg + list $line $msg +} "little $stderr16" +test winpipe-2.13 {16 bit comprehensive tests: a little to file} { + exec $cat16 < little > stdout 2> stderr + list [contents stdout] [contents stderr] +} "little $stderr16" +test winpipe-2.14 {16 bit comprehensive tests: a lot to file} { + exec $cat16 < big > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{$big} $stderr16" +test winpipe-2.15 {16 bit comprehensive tests: a little to pipe} {nt} { + catch {exec $cat16 < little | more > stdout 2> stderr} + list [contents stdout] [contents stderr] +} "{little\n} stderr16" +test winpipe-2.16 {16 bit comprehensive tests: a little to pipe} {95} { + exec $cat16 < little | more > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{\nlittle} stderr16" +test winpipe-2.17 {16 bit comprehensive tests: a lot to pipe} {nt} { + catch {exec $cat16 < big | more > stdout 2> stderr} + list [contents stdout] [contents stderr] +} "{$big\n} stderr16" +test winpipe-2.18 {16 bit comprehensive tests: a lot to pipe} {95} { + exec $cat16 < big | more > stdout 2> stderr + list [contents stdout] [contents stderr] +} "{\n$big} stderr16" +test winpipe-2.19 {16 bit comprehensive tests: to console} { + catch {exec $cat16 << "You should see this\n" >@stdout} msg + set msg +} [lindex $stderr16 0] +test winpipe-2.20 {16 bit comprehensive tests: to NUL} {nt} { + # some apps hang when sending a large amount to NUL. cat16 isn't one. + catch {exec $cat16 < big > nul} msg + set msg +} stderr16 +test winpipe-2.21 {16 bit comprehensive tests: to nowhere} {.console} { + exec $cat16 < big >&@stdout +} {} +test winpipe-2.22 {16 bit comprehensive tests: to file handle} { + set f1 [open "stdout" w] + set f2 [open "stderr" w] + exec $cat16 < little >@$f1 2>@$f2 + close $f1 + close $f2 + list [contents stdout] [contents stderr] +} "little $stderr16" +test winpipe-2.23 {16 bit comprehensive tests: write to application} {!win32s} { + set f [open "|$cat16 > stdout" w] + puts -nonewline $f "foo" + catch {close $f} msg + list [contents stdout] $msg +} "foo stderr16" +test winpipe-2.24 {16 bit comprehensive tests: read/write application} {nt} { + set f [open "|$cat16" r+] + puts $f $big + puts $f \032 + flush $f + set r [read $f 64] + catch {close $f} + set r +} "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" +} + +test winpipe-3.1 {Tcl_WaitPid} {nt} { + proc readResults {f} { + global x result + if { [eof $f] } { + close $f + set x 1 + } else { + set line [read $f ] + set result "$result$line" + } + } + + set f [open "|$cat32 < big 2> stderr" r] + fconfigure $f -buffering none -blocking 0 + fileevent $f readable "readResults $f" + set x 0 + set result "" + vwait x + list $result $x [contents stderr] +} "{$big} 1 stderr32" + +close [open nothing w] + +catch {set env_tmp $env(TMP)} +catch {set env_temp $env(TEMP)} + +set env(TMP) c:/ +set env(TEMP) c:/ + +test winpipe-3.1 {TclpCreateTempFile: cleanup temp files} { + set x {} + set existing [glob -nocomplain c:/tcl*.tmp] + exec $tcltest < nothing + foreach p [glob -nocomplain c:/tcl*.tmp] { + if {[lsearch $existing $p] != -1} { + lappend x $p + } + } + set x +} {} +test winpipe-3.2 {TclpCreateTempFile: TMP and TEMP not defined} { + set tmp $env(TMP) + set temp $env(TEMP) + unset env(TMP) + unset env(TEMP) + exec $tcltest < nothing + set env(TMP) $tmp + set env(TEMP) $temp + set x {} +} {} +test winpipe-3.3 {TclpCreateTempFile: TMP specifies non-existent directory} { + set tmp $env(TMP) + set env(TMP) snarky + exec $tcltest < nothing + set env(TMP) $tmp + set x {} +} {} +test winpipe-3.3 {TclpCreateTempFile: TEMP specifies non-existent directory} { + set tmp $env(TMP) + set temp $env(TEMP) + unset env(TMP) + set env(TEMP) snarky + exec $tcltest < nothing + set env(TMP) $tmp + set env(TEMP) $temp + set x {} +} {} + +# restore old values fro env(TMP) and env(TEMP) + +if {[catch {set env(TMP) $env_tmp}]} { + unset $env(TMP) +} +if {[catch {set env(TEMP) $env_temp}]} { + unset $env(TEMP) +} + +file delete big little stdout stderr nothing |