* unix/configure.in: The change below reveals that the public

        data type Tcl_StatBuf relies on config information.  For now,
        disabled the use of the tclConfig.h file until its full impact
        on Tcl's interface can be assessed.

        * unix/configure:       autoconf-2.57

        * generic/tcl.h:        Moved the #include "tclConfig.h" out of
        * generic/tclInt.h:     tcl.h.  The config settings are not part of
        * generic/tclPort.:     the public interface, and having it there
        breaks compiled against uninstalled Tcl and extensions using
        autoconf-2.5*.

2 files changed, 46 insertions, 243 deletions

diff --git a/unix/configure b/unix/configure
index 6cdd62f..01ef6d8 100755
--- a/unix/configure
+++ b/unix/configure
@@ -1274,9 +1274,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-          ac_config_headers="$ac_config_headers tclConfig.h"
-
-
 
 TCL_VERSION=8.5
 TCL_MAJOR_VERSION=8
@@ -6080,6 +6077,10 @@ fi
 
     do64bit_ok=no
     LDFLAGS_ORIG="$LDFLAGS"
+    # When ld needs options to work in 64-bit mode, put them in
+    # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load]
+    # is disabled by the user. [Bug 1016796]
+    LDFLAGS_ARCH=""
     TCL_EXPORT_FILE_SUFFIX=""
     UNSHARED_LIB_SUFFIX=""
     TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`'
@@ -6168,7 +6169,7 @@ echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;}
 		else
 		    do64bit_ok=yes
 		    CFLAGS="$CFLAGS -q64"
-		    LDFLAGS="$LDFLAGS -q64"
+		    LDFLAGS_ARCH="-q64"
 		    RANLIB="${RANLIB} -X64"
 		    AR="${AR} -X64"
 		    SHLIB_LD_FLAGS="-b64"
@@ -6230,7 +6231,7 @@ echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;}
 		else
 		    do64bit_ok=yes
 		    CFLAGS="$CFLAGS -q64"
-		    LDFLAGS="$LDFLAGS -q64"
+		    LDFLAGS_ARCH="-q64"
 		    RANLIB="${RANLIB} -X64"
 		    AR="${AR} -X64"
 		    SHLIB_LD_FLAGS="-b64"
@@ -6539,7 +6540,7 @@ echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;}
 		else
 		    do64bit_ok=yes
 		    CFLAGS="$CFLAGS +DD64"
-		    LDFLAGS="$LDFLAGS +DD64"
+		    LDFLAGS_ARCH="+DD64"
 		fi
 	    fi
 	    ;;
@@ -6684,7 +6685,7 @@ echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;}
 	            do64bit_ok=yes
 	            SHLIB_LD="ld -64 -shared -rdata_shared"
 	            CFLAGS="$CFLAGS -64"
-	            LDFLAGS="$LDFLAGS -64"
+	            LDFLAGS_ARCH="-64"
 	        fi
 	    fi
 	    ;;
@@ -7558,10 +7559,10 @@ echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;}
 			    do64bit_ok=yes
 			    if test "$do64bitVIS" = "yes" ; then
 				CFLAGS="$CFLAGS -xarch=v9a"
-			    	LDFLAGS="$LDFLAGS -xarch=v9a"
+			    	LDFLAGS_ARCH="-xarch=v9a"
 			    else
 				CFLAGS="$CFLAGS -xarch=v9"
-			    	LDFLAGS="$LDFLAGS -xarch=v9"
+			    	LDFLAGS_ARCH="-xarch=v9"
 			    fi
 			fi
 		else
@@ -7898,6 +7899,7 @@ fi;
 	LD_SEARCH_FLAGS=""
 	BUILD_DLTEST=""
     fi
+    LDFLAGS="$LDFLAGS $LDFLAGS_ARCH"
 
     # If we're running gcc, then change the C flags for compiling shared
     # libraries to the right flags for gcc, instead of those for the
@@ -13623,7 +13625,38 @@ s/^[^=]*=[ 	]*$//;
 }'
 fi
 
-DEFS=-DHAVE_CONFIG_H
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*([^)]*)\)[ 	]*\(.*\),-D\1=\2,g
+t quote
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ 	`~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output.  A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
+
 
 ac_libobjs=
 ac_ltlibobjs=
@@ -13640,7 +13673,6 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
-DEFS=-DHAVE_TCL_CONFIG_H
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -13956,15 +13988,10 @@ Usage: $0 [OPTIONS] [FILE]...
       --recheck    update $as_me by reconfiguring in the same conditions
   --file=FILE[:TEMPLATE]
                    instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
 
 Configuration files:
 $config_files
 
-Configuration headers:
-$config_headers
-
 Report bugs to <bug-autoconf@gnu.org>."
 _ACEOF
 
@@ -14076,7 +14103,6 @@ do
   "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
   "dltest/Makefile" ) CONFIG_FILES="$CONFIG_FILES dltest/Makefile" ;;
   "tclConfig.sh" ) CONFIG_FILES="$CONFIG_FILES tclConfig.sh" ;;
-  "tclConfig.h" ) CONFIG_HEADERS="$CONFIG_HEADERS tclConfig.h" ;;
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
@@ -14089,7 +14115,6 @@ done
 # bizarre bug on SunOS 4.1.3.
 if $ac_need_defaults; then
   test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
@@ -14433,228 +14458,6 @@ s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
 
 done
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='[ 	].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[ 	]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*\)\(([^)]*)\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[ 	]*#[ 	]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[ 	]*#[ 	]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_dir" : 'X\(//\)[^/]' \| \
-         X"$as_dir" : 'X\(//\)$' \| \
-         X"$as_dir" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-done
-_ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
 
diff --git a/unix/configure.in b/unix/configure.in
index e259ef9..04f8557 100644
--- a/unix/configure.in
+++ b/unix/configure.in
@@ -3,12 +3,12 @@ dnl	This file is an input file used by the GNU "autoconf" program to
 dnl	generate the file "configure", which is run during Tcl installation
 dnl	to configure the system for the local environment.
 #
-# RCS: @(#) $Id: configure.in,v 1.118 2004/11/16 03:30:56 das Exp $
+# RCS: @(#) $Id: configure.in,v 1.119 2004/11/17 17:53:03 dgp Exp $
 
 AC_INIT(../generic/tcl.h)
 AC_PREREQ(2.57)
-AC_CONFIG_HEADERS([tclConfig.h])
-AC_CONFIG_COMMANDS_PRE([DEFS=-DHAVE_TCL_CONFIG_H])
+dnl AC_CONFIG_HEADERS([tclConfig.h])
+dnl AC_CONFIG_COMMANDS_PRE([DEFS=-DHAVE_TCL_CONFIG_H])
 
 TCL_VERSION=8.5
 TCL_MAJOR_VERSION=8