* win/tclWin32Dll.c:

	* win/tclWinChan.c:
	* win/tclWinFCmd.c:
	* win/tclWinInit.c:
	* win/tclWinPipe.c:
	* win/tclWinSock.c: removed all code that supported Win32s.  It
	was no longer officially supported, and likely didn't work anyway.
	* win/makefile.vc: removed 16 bit stuff, cleaned up.
	* win/tcl16.rc:
	* win/tclWin16.c:
	* win/winDumpExts.c: these files have been removed from the
	source tree (no longer necessary to build)
	* win/aclocal.m4: made it just include tcl.m4

1 files changed, 1 insertions, 445 deletions

diff --git a/win/aclocal.m4 b/win/aclocal.m4
index 50a23cf..bc7540d 100644
--- a/win/aclocal.m4
+++ b/win/aclocal.m4
@@ -1,445 +1 @@
-#------------------------------------------------------------------------
-# SC_PATH_TCLCONFIG --
-#
-#	Locate the tclConfig.sh file and perform a sanity check on
-#	the Tcl compile flags
-#	Currently a no-op for Windows
-#
-# Arguments:
-#	PATCH_LEVEL	The patch level for Tcl if any.
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-tcl=...
-#
-#	Sets the following vars:
-#		TCL_BIN_DIR	Full path to the tclConfig.sh file
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PATH_TCLCONFIG, [
-    AC_MSG_CHECKING([the location of tclConfig.sh])
-
-    if test -d ../../tcl8.2$1/win;  then
-	TCL_BIN_DIR_DEFAULT=../../tcl8.2$1/win
-    else
-	TCL_BIN_DIR_DEFAULT=../../tcl8.2/win
-    fi
-    
-    AC_ARG_WITH(tcl, [  --with-tcl=DIR          use Tcl 8.2 binaries from DIR],
-	    TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd $TCL_BIN_DIR_DEFAULT; pwd`)
-    if test ! -d $TCL_BIN_DIR; then
-	AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR does not exist)
-    fi
-    if test ! -f $TCL_BIN_DIR/tclConfig.sh; then
-	AC_MSG_ERROR(There is no tclConfig.sh in $TCL_BIN_DIR:  perhaps you did not specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?)
-    fi
-    AC_MSG_RESULT($TCL_BIN_DIR/tclConfig.sh)
-])
-
-#------------------------------------------------------------------------
-# SC_PATH_TKCONFIG --
-#
-#	Locate the tkConfig.sh file
-#	Currently a no-op for Windows
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-tk=...
-#
-#	Sets the following vars:
-#		TK_BIN_DIR	Full path to the tkConfig.sh file
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PATH_TKCONFIG, [
-    AC_MSG_CHECKING([the location of tkConfig.sh])
-
-    if test -d ../../tk8.2$1/win;  then
-	TK_BIN_DIR_DEFAULT=../../tk8.2$1/win
-    else
-	TK_BIN_DIR_DEFAULT=../../tk8.2/win
-    fi
-    
-    AC_ARG_WITH(tk, [  --with-tk=DIR          use Tk 8.2 binaries from DIR],
-	    TK_BIN_DIR=$withval, TK_BIN_DIR=`cd $TK_BIN_DIR_DEFAULT; pwd`)
-    if test ! -d $TK_BIN_DIR; then
-	AC_MSG_ERROR(Tk directory $TK_BIN_DIR does not exist)
-    fi
-    if test ! -f $TK_BIN_DIR/tkConfig.sh; then
-	AC_MSG_ERROR(There is no tkConfig.sh in $TK_BIN_DIR:  perhaps you did not specify the Tk *build* directory (not the toplevel Tk directory) or you forgot to configure Tk?)
-    fi
-
-    AC_MSG_RESULT($TK_BIN_DIR/tkConfig.sh)
-])
-
-#------------------------------------------------------------------------
-# SC_LOAD_TCLCONFIG --
-#
-#	Load the tclConfig.sh file
-#	Currently a no-op for Windows
-#
-# Arguments:
-#	
-#	Requires the following vars to be set:
-#		TCL_BIN_DIR
-#
-# Results:
-#
-#	Subst the following vars:
-#		TCL_BIN_DIR
-#		TCL_SRC_DIR
-#		TCL_LIB_FILE
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_LOAD_TCLCONFIG, [
-    AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh])
-
-    if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then
-        AC_MSG_RESULT([loading])
-	. $TCL_BIN_DIR/tclConfig.sh
-    else
-        AC_MSG_RESULT([file not found])
-    fi
-
-    # The eval is required to do the TCL_DBGX substitution in the
-    # TCL_LIB_FILE variable.
-
-    eval TCL_LIB_FILE=${TCL_LIB_FILE}
-    eval TCL_LIB_FLAG=${TCL_LIB_FLAG}
-
-    AC_SUBST(TCL_BIN_DIR)
-    AC_SUBST(TCL_SRC_DIR)
-    AC_SUBST(TCL_LIB_FILE)
-])
-
-#------------------------------------------------------------------------
-# SC_LOAD_TKCONFIG --
-#
-#	Load the tkConfig.sh file
-#	Currently a no-op for Windows
-#
-# Arguments:
-#	
-#	Requires the following vars to be set:
-#		TK_BIN_DIR
-#
-# Results:
-#
-#	Sets the following vars that should be in tkConfig.sh:
-#		TK_BIN_DIR
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_LOAD_TKCONFIG, [
-    AC_MSG_CHECKING([for existence of $TCLCONFIG])
-
-    if test -f "$TK_BIN_DIR/tkConfig.sh" ; then
-        AC_MSG_CHECKING([loading $TK_BIN_DIR/tkConfig.sh])
-	. $TK_BIN_DIR/tkConfig.sh
-    else
-        AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh])
-    fi
-
-
-    AC_SUBST(TK_BIN_DIR)
-    AC_SUBST(TK_SRC_DIR)
-    AC_SUBST(TK_LIB_FILE)
-])
-
-#------------------------------------------------------------------------
-# SC_ENABLE_GCC --
-#
-#	Allows the use of GCC if available
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-gcc
-#
-#	Sets the following vars:
-#		CC	Command to use for the compiler
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_ENABLE_GCC, [
-    AC_ARG_ENABLE(gcc, [  --enable-gcc            allow use of gcc if available [--disable-gcc]],
-	[ok=$enableval], [ok=no])
-    if test "$ok" = "yes"; then
-	CC=gcc
-	AC_PROG_CC
-    else
-	CC=cl
-    fi
-])
-
-#------------------------------------------------------------------------
-# SC_ENABLE_SHARED --
-#
-#	Allows the building of shared libraries
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-shared=yes|no
-#
-#	Defines the following vars:
-#		STATIC_BUILD	Used for building import/export libraries
-#				on Windows.
-#
-#	Sets the following vars:
-#		SHARED_BUILD	Value of 1 or 0
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_ENABLE_SHARED, [
-    AC_MSG_CHECKING([how to build libraries])
-    AC_ARG_ENABLE(shared,
-	[  --enable-shared         build and link with shared libraries [--enable-shared]],
-    [tcl_ok=$enableval], [tcl_ok=yes])
-
-    if test "${enable_shared+set}" = set; then
-	enableval="$enable_shared"
-	tcl_ok=$enableval
-    else
-	tcl_ok=yes
-    fi
-
-    if test "$tcl_ok" = "yes" ; then
-	AC_MSG_RESULT([shared])
-	SHARED_BUILD=1
-    else
-	AC_MSG_RESULT([static])
-	SHARED_BUILD=0
-	AC_DEFINE(STATIC_BUILD)
-    fi
-])
-
-#------------------------------------------------------------------------
-# SC_ENABLE_THREADS --
-#
-#	Specify if thread support should be enabled
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-threads=yes|no
-#
-#	Defines the following vars:
-#		TCL_THREADS
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_ENABLE_THREADS, [
-    AC_MSG_CHECKING(for building with threads)
-    AC_ARG_ENABLE(threads, [  --enable-threads        build with threads],
-	[tcl_ok=$enableval], [tcl_ok=no])
-
-    if test "$tcl_ok" = "yes"; then
-	AC_MSG_RESULT(yes)
-	TCL_THREADS=1
-	AC_DEFINE(TCL_THREADS)
-    else
-	TCL_THREADS=0
-	AC_MSG_RESULT(no (default))
-    fi
-])
-
-#------------------------------------------------------------------------
-# SC_ENABLE_SYMBOLS --
-#
-#	Specify if debugging symbols should be used
-#
-# Arguments:
-#	none
-#	
-#	Requires the following vars to be set:
-#		CFLAGS_DEBUG
-#		CFLAGS_OPTIMIZE
-#	
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-symbols
-#
-#	Defines the following vars:
-#		CFLAGS_DEFAULT	Sets to CFLAGS_DEBUG if true
-#				Sets to CFLAGS_OPTIMIZE if false
-#		LDFLAGS_DEFAULT	Sets to LDFLAGS_DEBUG if true
-#				Sets to LDFLAGS_OPTIMIZE if false
-#		DBGX		Debug library extension
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_ENABLE_SYMBOLS, [
-    AC_MSG_CHECKING([for build with symbols])
-    AC_ARG_ENABLE(symbols, [  --enable-symbols        build with debugging symbols [--disable-symbols]],    [tcl_ok=$enableval], [tcl_ok=no])
-
-    if test "$tcl_ok" = "yes"; then
-	CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
-	LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
-	DBGX=d
-	AC_MSG_RESULT([yes])
-    else
-	CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}"
-	LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
-	DBGX=""
-	AC_MSG_RESULT([no])
-    fi
-])
-
-
-#--------------------------------------------------------------------
-# SC_CONFIG_CFLAGS
-#
-#	Try to determine the proper flags to pass to the compiler
-#	for building shared libraries and other such nonsense.
-#
-#	NOTE: The backslashes in quotes below are substituted twice
-#	due to the fact that they are in a macro and then inlined
-#	in the final configure script.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Defines the following vars for all compilers:
-#    		EXTRA_CFLAGS
-#    		CFLAGS_DEBUG
-#    		CFLAGS_OPTIMIZE
-#    		CFLAGS_WARNING
-#    		LDFLAGS_DEBUG
-#    		LDFLAGS_OPTIMIZE
-#    		PATHTYPE
-#    		CC_OBJNAME
-#    		CC_EXENAME
-#
-#	Defines the following vars for non-gcc compilers
-#    		SHLIB_LD
-#    		SHLIB_LD_LIBS
-#    		LIBS
-#    		AR
-#    		MAKE_LIB
-#    		MAKE_EXE
-#    		MAKE_DLL
-#
-#    		LIBSUFFIX
-#    		LIBRARIES
-#    		EXESUFFIX
-#    		DLLSUFFIX
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_CONFIG_CFLAGS, [
-    AC_MSG_CHECKING([compiler flags])
-    EXTRA_CFLAGS=""
-    # set various compiler flags depending on whether we are using gcc or cl
-    
-    if test "${GCC}" = "yes" ; then
-	CFLAGS_DEBUG=-g
-	CFLAGS_OPTIMIZE=-O
-	CFLAGS_WARNING="-Wall -Wconversion"
-	LDFLAGS_DEBUG=-g
-	LDFLAGS_OPTIMIZE=-O
-	PATHTYPE=-u
-	
-	# Specify the CC output file names based on the target name
-	CC_OBJNAME="-o \[$]@"
-	CC_EXENAME="-o \[$]@"
-    else
-	SHLIB_LD="link -dll -nologo"
-	SHLIB_LD_LIBS="user32.lib advapi32.lib"
-	LIBS="user32.lib advapi32.lib"
-	AR="lib -nologo"
-	STLIB_LD="lib -nologo"
-	RC="rc"
-	MAKE_LIB="\${AR} -out:\[$]@"
-	MAKE_EXE="\${CC} -Fe\[$]@"
-	
-	if test "${SHARED_BUILD}" = "0" ; then
-	    # static
-            AC_MSG_RESULT([using static flags])
-	    runtime=-MT
-	    MAKE_DLL="echo "
-	    LIBSUFFIX="s\${DBGX}.lib"
-	    LIBRARIES="\${STATIC_LIBRARIES}"
-	    EXESUFFIX="s\${DBGX}.exe"
-	    DLLSUFFIX=""
-	else
-	    # dynamic
-            AC_MSG_RESULT([using shared flags])
-	    runtime=-MD
-	    MAKE_DLL="\${SHLIB_LD} \${SHLIB_LD_LIBS} \$(LDFLAGS) -out:\[$]@"
-	    LIBSUFFIX="\${DBGX}.lib"
-	    DLLSUFFIX="\${DBGX}.dll"
-	    EXESUFFIX="\${DBGX}.exe"
-	    LIBRARIES="\${SHARED_LIBRARIES}"
-	fi
-
-	EXTRA_CFLAGS="-YX"
-	CFLAGS_DEBUG="-nologo -Z7 -Od -WX ${runtime}d"
-#	CFLAGS_OPTIMIZE="-nologo -O2 -Gs -GD ${runtime}"
-	CFLAGS_OPTIMIZE="-nologo -Oti -Gs -GD ${runtime}"
-	CFLAGS_WARNING="-W3"
-	LDFLAGS_DEBUG="-debug:full -debugtype:cv"
-	LDFLAGS_OPTIMIZE="-release"
-	PATHTYPE=-w
-	
-	# Specify the CC output file names based on the target name
-	CC_OBJNAME="-Fo\[$]@"
-	CC_EXENAME="-Fe\"\$(shell cygpath \$(PATHTYPE) '\[$]@')\""
-
-	# Specify linker flags depending on the type of app being 
-	# built -- Console vs. Window.
-	LDFLAGS_CONSOLE="-subsystem:console"
-	LDFLAGS_WINDOW="-subsystem:windows"
-    fi
-])
-
-#------------------------------------------------------------------------
-# SC_WITH_TCL --
-#
-#	Location of the Tcl build directory.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-tcl=...
-#
-#	Defines the following vars:
-#		TCL_BIN_DIR	Full path to the tcl build dir.
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_WITH_TCL, [
-    if test -d ../../tcl8.2$1/win;  then
-	TCL_BIN_DEFAULT=../../tcl8.2$1/win
-    else
-	TCL_BIN_DEFAULT=../../tcl8.2/win
-    fi
-    
-    AC_ARG_WITH(tcl, [  --with-tcl=DIR          use Tcl 8.2 binaries from DIR],
-	    TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd $TCL_BIN_DEFAULT; pwd`)
-    if test ! -d $TCL_BIN_DIR; then
-	AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR does not exist)
-    fi
-    if test ! -f $TCL_BIN_DIR/Makefile; then
-	AC_MSG_ERROR(There is no Makefile in $TCL_BIN_DIR:  perhaps you did not specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?)
-    else
-	echo "building against Tcl binaries in: $TCL_BIN_DIR"
-    fi
-    AC_SUBST(TCL_BIN_DIR)
-])
-
+builtin(include,tcl.m4)