Continued work on configure and make scripts

1 files changed, 415 insertions, 875 deletions

diff --git a/win/aclocal.m4 b/win/aclocal.m4
index d43ff7b..dbbf43b 100644
--- a/win/aclocal.m4
+++ b/win/aclocal.m4
@@ -1,875 +1,415 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4a

-

-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.

-dnl This file is free software; the Free Software Foundation

-dnl gives unlimited permission to copy and/or distribute it,

-dnl with or without modifications, as long as this notice is preserved.

-

-dnl This program is distributed in the hope that it will be useful,

-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-dnl PARTICULAR PURPOSE.

-

-#------------------------------------------------------------------------

-# SC_PATH_TCLCONFIG --

-#

-#	Locate the tclConfig.sh file and perform a sanity check on

-#	the Tcl compile flags

-#	Currently a no-op for Windows

-#

-# Arguments:

-#	none

-#

-# Results:

-#

-#	Adds the following arguments to configure:

-#		--with-tcl=...

-#

-#	Defines the following vars:

-#		TCLCONFIG	Full path to the tclConfig.sh file

-#------------------------------------------------------------------------

-

-AC_DEFUN(SC_PATH_TCLCONFIG, [

-])

-

-#------------------------------------------------------------------------

-# SC_PATH_TKCONFIG --

-#

-#	Locate the tkConfig.sh file

-#	Currently a no-op for Windows

-#

-# Arguments:

-#	none

-#

-# Results:

-#

-#	Adds the following arguments to configure:

-#		--with-tk=...

-#

-#	Defines the following vars:

-#		TKCONFIG	Full path to the tkConfig.sh file

-#------------------------------------------------------------------------

-

-AC_DEFUN(SC_PATH_TKCONFIG, [

-])

-

-#------------------------------------------------------------------------

-# SC_LOAD_TCLCONFIG --

-#

-#	Load the tclConfig.sh file

-#	Currently a no-op for Windows

-#

-# Arguments:

-#	

-#	Requires the following vars to be set:

-#		TCLCONFIG

-#

-# Results:

-#

-#	Subst's the following vars:

-#		TCL_CC

-#		TCL_DEFS

-#		TCL_CFLAGS

-#		TCL_DBGX

-#		TCL_LIBS

-#		TCL_SHLIB_LD

-#		SHLIB_SUFFIX

-#		TCL_LD_FLAGS

-#		TCL_BUILD_LIB_SPEC

-#		TCL_LIB_SPEC

-#		TCL_SHARED_LIB_SUFFIX

-#------------------------------------------------------------------------

-

-AC_DEFUN(SC_LOAD_TCLCONFIG, [

-])

-

-#------------------------------------------------------------------------

-# SC_LOAD_TKCONFIG --

-#

-#	Load the tkConfig.sh file

-#	Currently a no-op for Windows

-#

-# Arguments:

-#	

-#	Requires the following vars to be set:

-#		TKCONFIG

-#

-# Results:

-#

-#	Subst's the following vars:

-#		TK_VERSION

-#		TK_DEFS

-#		TK_DBGX

-#		TK_LIBS

-#		TK_XINCLUDES

-#		TK_XLIBSW

-#		TK_BUILD_LIB_SPEC

-#		TK_LIB_SPEC

-#------------------------------------------------------------------------

-

-AC_DEFUN(SC_LOAD_TKCONFIG, [

-])

-

-#------------------------------------------------------------------------

-# SC_ENABLE_GCC --

-#

-#	Allows the use of GCC if available

-#

-# Arguments:

-#	none

-#	

-# Results:

-#

-#	Adds the following arguments to configure:

-#		--enable-gcc

-#

-#	Defines the following vars:

-#		CC	Command to use for the compiler

-#------------------------------------------------------------------------

-

-AC_DEFUN(SC_ENABLE_GCC, [

-    AC_ARG_ENABLE(gcc, [  --enable-gcc            allow use of gcc if available [--disable-gcc]],

-	[ok=$enableval], [ok=no])

-    if test "$ok" = "yes"; then

-	CC=gcc

-    else

-	CC=cl

-    fi

-])

-

-#------------------------------------------------------------------------

-# SC_ENABLE_SHARED --

-#

-#	Allows the building of shared libraries

-#

-# Arguments:

-#	none

-#	

-# Results:

-#

-#	Adds the following arguments to configure:

-#		--enable-shared=yes|no

-#

-#	Defines the following vars:

-#		TCL_SHARED_BUILD	Value of 1 or 0

-#		STATIC_BUILD

-#------------------------------------------------------------------------

-

-AC_DEFUN(SC_ENABLE_SHARED, [

-    AC_ARG_ENABLE(shared,

-	[  --enable-shared         build and link with shared libraries [--enable-shared]],

-    [tcl_ok=$enableval], [tcl_ok=yes])

-

-    if test "${enable_shared+set}" = set; then

-    enableval="$enable_shared"

-    tcl_ok=$enableval

-    else

-    tcl_ok=yes

-    fi

-

-    if test "$tcl_ok" = "yes" ; then

-	TCL_SHARED_BUILD=1

-    else

-	TCL_SHARED_BUILD=0

-	AC_DEFINE(STATIC_BUILD)

-    fi

-

-])

-

-#------------------------------------------------------------------------

-# SC_ENABLE_THREADS --

-#

-#	Specify if thread support should be enabled

-#

-# Arguments:

-#	none

-#	

-# Results:

-#

-#	Adds the following arguments to configure:

-#		--enable-threads=yes|no

-#

-#	Defines the following vars:

-#		TCL_THREADS

-#

-#------------------------------------------------------------------------

-

-AC_DEFUN(SC_ENABLE_THREADS, [

-    AC_ARG_ENABLE(threads, [  --enable-threads        build with threads],

-	[tcl_ok=$enableval], [tcl_ok=no])

-    if test "$tcl_ok" = "yes"; then

-	AC_DEFINE(TCL_THREADS)

-	echo "building with threads enabled"

-    else

-	echo "building with threads disabled (default)"

-    fi

-])

-

-#------------------------------------------------------------------------

-# SC_ENABLE_SYMBOLS --

-#

-#	Specify if debugging symbols should be used

-#

-# Arguments:

-#	none

-#	

-#	Requires the following vars to be set:

-#		CFLAGS_DEBUG

-#		CFLAGS_OPTIMIZE

-#	

-# Results:

-#

-#	Adds the following arguments to configure:

-#		--enable-symbols

-#

-#	Defines the following vars:

-#		CFLAGS_DEFAULT	Sets to CFLAGS_DEBUG if true

-#				Sets to CFLAGS_OPTIMIZE if false

-#		LD_FLAGS_DEFAULT	Sets to LDFLAGS_DEBUG if true

-				Sets to LDFLAGS_OPTIMIZE if false

-#		DBGX		Debug library extension

-#

-#------------------------------------------------------------------------

-

-AC_DEFUN(SC_ENABLE_SYMBOLS, [

-    AC_ARG_ENABLE(symbols, [  --enable-symbols        build with debugging symbols [--disable-symbols]],    [tcl_ok=$enableval], [tcl_ok=no])

-

-    if test "$tcl_ok" = "yes"; then

-	CFLAGS_DEFAULT='${CFLAGS_DEBUG}'

-	LD_FLAGS_DEFAULT='${LDFLAGS_DEBUG}'

-	DBGX=d

-	echo "building with debug symbols"

-    else

-	CFLAGS_DEFAULT='${CFLAGS_OPTIMIZE}'

-	LD_FLAGS_DEFAULT='${LDFLAGS_OPTIMIZE}'

-	DBGX=""

-	echo "building without debug symbols"

-    fi

-])

-

-

-#--------------------------------------------------------------------

-# SC_TCL_CONFIG_CFLAGS

-#

-# Arguments:

-#	none

-#

-# Results:

-#

-#	Defines the following vars:

-#

-#       DL_OBJS -       Name of the object file that implements dynamic

-#                       loading for Tcl on this system.

-#       DL_LIBS -       Library file(s) to include in tclsh and other base

-#                       applications in order for the "load" command to work.

-#       LD_FLAGS -      Flags to pass to the compiler when linking object

-#                       files into an executable application binary such

-#                       as tclsh.

-#       LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",

-#                       that tell the run-time dynamic linker where to look

-#                       for shared libraries such as libtcl.so.  Depends on

-#                       the variable LIB_RUNTIME_DIR in the Makefile.

-#       MAKE_LIB -      Command to execute to build the Tcl library;

-#                       differs depending on whether or not Tcl is being

-#                       compiled as a shared library.

-#       SHLIB_CFLAGS -  Flags to pass to cc when compiling the components

-#                       of a shared library (may request position-independent

-#                       code, among other things).

-#       SHLIB_LD -      Base command to use for combining object files

-#                       into a shared library.

-#       SHLIB_LD_LIBS - Dependent libraries for the linker to scan when

-#                       creating shared libraries.  This symbol typically

-#                       goes at the end of the "ld" commands that build

-#                       shared libraries. The value of the symbol is

-#                       "${LIBS}" if all of the dependent libraries should

-#                       be specified when creating a shared library.  If

-#                       dependent libraries should not be specified (as on

-#                       SunOS 4.x, where they cause the link to fail, or in

-#                       general if Tcl and Tk aren't themselves shared

-#                       libraries), then this symbol has an empty string

-#                       as its value.

-#       SHLIB_SUFFIX -  Suffix to use for the names of dynamically loadable

-#                       extensions.  An empty string means we don't know how

-#                       to use shared libraries on this platform.

-#       TCL_LIB_FILE -  Name of the file that contains the Tcl library, such

-#                       as libtcl7.8.so or libtcl7.8.a.

-#       TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl"

-#                       in the shared library name, using the $VERSION variable

-#                       to put the version in the right place.  This is used

-#                       by platforms that need non-standard library names.

-#                       Examples:  ${VERSION}.so.1.1 on NetBSD, since it needs

-#                       to have a version after the .so, and ${VERSION}.a

-#                       on AIX, since the Tcl shared library needs to have

-#                       a .a extension whereas shared objects for loadable

-#                       extensions have a .so extension.  Defaults to

-#                       ${VERSION}${SHLIB_SUFFIX}.

-#       TCL_NEEDS_EXP_FILE -

-#                       1 means that an export file is needed to link to a

-#                       shared library.

-#       TCL_EXP_FILE -  The name of the installed export / import file which

-#                       should be used to link to the Tcl shared library.

-#                       Empty if Tcl is unshared.

-#       TCL_BUILD_EXP_FILE -

-#                       The name of the built export / import file which

-#                       should be used to link to the Tcl shared library.

-#                       Empty if Tcl is unshared.

-#	CFLAGS_DEBUG -

-#			Flags used when running the compiler in debug mode

-#	CFLAGS_OPTIMIZE -

-#			Flags used when running the compiler in optimize mode

-#--------------------------------------------------------------------

-

-AC_DEFUN(SC_TCL_CONFIG_CFLAGS, [

-

-    # Step 1: set the variable "system" to hold the name and version number

-    # for the system.  This can usually be done via the "uname" command, but

-    # there are a few systems, like Next, where this doesn't work.

-

-    AC_MSG_CHECKING([system version (for dynamic loading)])

-    if test -f /usr/lib/NextStep/software_version; then

-	system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`

-    else

-	system=`uname -s`-`uname -r`

-	if test "$?" -ne 0 ; then

-	    AC_MSG_RESULT([unknown (can't find uname command)])

-	    system=unknown

-	else

-	    # Special check for weird MP-RAS system (uname returns weird

-	    # results, and the version is kept in special file).

-	

-	    if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then

-		system=MP-RAS-`awk '{print $3}' /etc/.relid'`

-	    fi

-	    if test "`uname -s`" = "AIX" ; then

-		system=AIX-`uname -v`.`uname -r`

-	    fi

-	    AC_MSG_RESULT($system)

-	fi

-    fi

-

-    # Step 2: check for existence of -ldl library.  This is needed because

-    # Linux can use either -ldl or -ldld for dynamic loading.

-

-    AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no)

-

-    # Step 3: set configuration options based on system name and version.

-

-    do64bit_ok=no

-    fullSrcDir=`cd $srcdir; pwd`

-    EXTRA_CFLAGS=""

-    TCL_EXPORT_FILE_SUFFIX=""

-    TCL_UNSHARED_LIB_SUFFIX=""

-    TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`'

-    ECHO_VERSION='`echo ${VERSION}`'

-    TCL_LIB_VERSIONS_OK=ok

-    CFLAGS_DEBUG=-g

-    CFLAGS_OPTIMIZE=-O

-    TCL_NEEDS_EXP_FILE=0

-    TCL_BUILD_EXP_FILE=""

-    TCL_EXP_FILE=""

-    case $system in

-	AIX-4.[[2-9]])

-	    SHLIB_CFLAGS=""

-	    SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

-	    TCL_NEEDS_EXP_FILE=1

-	    TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp'

-	    ;;

-	AIX-*)

-	    SHLIB_CFLAGS=""

-	    SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    LIBOBJS="$LIBOBJS tclLoadAix.o"

-	    DL_LIBS="-lld"

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

-	    TCL_NEEDS_EXP_FILE=1

-	    TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp'

-	    ;;

-	BSD/OS-2.1*|BSD/OS-3*)

-	    SHLIB_CFLAGS=""

-	    SHLIB_LD="shlicc -r"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	BSD/OS-4.*)

-	    SHLIB_CFLAGS="-export-dynamic -fPIC"

-	    SHLIB_LD="cc -shared"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS="-export-dynamic"

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	dgux*)

-	    SHLIB_CFLAGS="-K PIC"

-	    SHLIB_LD="cc -G"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*|HP-UX-*.11.*)

-	    SHLIB_SUFFIX=".sl"

-	    AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)

-	    if test "$tcl_ok" = yes; then

-		SHLIB_CFLAGS="+z"

-		SHLIB_LD="ld -b"

-		SHLIB_LD_LIBS=""

-		DL_OBJS="tclLoadShl.o"

-		DL_LIBS="-ldld"

-		LD_FLAGS="-Wl,-E"

-		LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'

-	    fi

-	    ;;

-	IRIX-4.*)

-	    SHLIB_CFLAGS="-G 0"

-	    SHLIB_SUFFIX=".a"

-	    SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    DL_OBJS="tclLoadAout.o"

-	    DL_LIBS=""

-	    LD_FLAGS="-Wl,-D,08000000"

-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

-	    TCL_SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a'

-	    ;;

-	IRIX-5.*|IRIX-6.*|IRIX64-6.5*)

-	    SHLIB_CFLAGS=""

-	    SHLIB_LD="ld -n32 -shared -rdata_shared"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS=""

-	    LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'

-	    if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then

-		EXTRA_CFLAGS="-mabi=n32"

-		LD_FLAGS="-mabi=n32"

-	    else

-		case $system in

-		    IRIX-6.3)

-			# Use to build 6.2 compatible binaries on 6.3.

-			EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS"

-			;;

-		    *)

-			EXTRA_CFLAGS="-n32"

-			;;

-		esac

-		LD_FLAGS="-n32"

-	    fi

-	    ;;

-	IRIX64-6.*)

-	    SHLIB_CFLAGS=""

-	    SHLIB_LD="ld -32 -shared -rdata_shared"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS=""

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'

-	    ;;

-	Linux*)

-	    SHLIB_CFLAGS="-fPIC"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".so"

-	    if test "$have_dl" = yes; then

-		SHLIB_LD="${CC} -shared"

-		DL_OBJS="tclLoadDl.o"

-		DL_LIBS="-ldl"

-		LD_FLAGS="-rdynamic"

-		LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'

-	    else

-		AC_CHECK_HEADER(dld.h, [

-		    SHLIB_LD="ld -shared"

-		    DL_OBJS="tclLoadDld.o"

-		    DL_LIBS="-ldld"

-		    LD_FLAGS=""

-		    LD_SEARCH_FLAGS=""])

-	    fi

-	    ;;

-	MP-RAS-02*)

-	    SHLIB_CFLAGS="-K PIC"

-	    SHLIB_LD="cc -G"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	MP-RAS-*)

-	    SHLIB_CFLAGS="-K PIC"

-	    SHLIB_LD="cc -G"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS="-Wl,-Bexport"

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	NetBSD-*|FreeBSD-[[12]].*|OpenBSD-*)

-	    # Not available on all versions:  check for include file.

-	    AC_CHECK_HEADER(dlfcn.h, [

-		SHLIB_CFLAGS="-fpic"

-		SHLIB_LD="ld -Bshareable -x"

-		SHLIB_LD_LIBS=""

-		SHLIB_SUFFIX=".so"

-		DL_OBJS="tclLoadDl.o"

-		DL_LIBS=""

-		LD_FLAGS=""

-		LD_SEARCH_FLAGS=""

-		TCL_SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'

-	    ], [

-		SHLIB_CFLAGS=""

-		SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r"

-		SHLIB_LD_LIBS='${LIBS}'

-		SHLIB_SUFFIX=".a"

-		DL_OBJS="tclLoadAout.o"

-		DL_LIBS=""

-		LD_FLAGS=""

-		LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

-		TCL_SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'

-	    ])

-

-	    # FreeBSD doesn't handle version numbers with dots.

-

-	    TCL_UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'

-	    TCL_LIB_VERSIONS_OK=nodots

-	    ;;

-	FreeBSD-*)

-	    # FreeBSD 3.* and greater have ELF.

-	    SHLIB_CFLAGS="-fpic"

-	    SHLIB_LD="ld -Bshareable -x"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS=""

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	NEXTSTEP-*)

-	    SHLIB_CFLAGS=""

-	    SHLIB_LD="cc -nostdlib -r"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadNext.o"

-	    DL_LIBS=""

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	OS/390-*)

-	    CFLAGS_OPTIMIZE=""      # Optimizer is buggy

-	    AC_DEFINE(_OE_SOCKETS)  # needed in sys/socket.h

-	    ;;      

-	OSF1-1.0|OSF1-1.1|OSF1-1.2)

-	    # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1

-	    SHLIB_CFLAGS=""

-	    # Hack: make package name same as library name

-	    SHLIB_LD='ld -R -export $@:'

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadOSF.o"

-	    DL_LIBS=""

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	OSF1-1.*)

-	    # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2

-	    SHLIB_CFLAGS="-fpic"

-	    SHLIB_LD="ld -shared"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS=""

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	OSF1-V*)

-	    # Digital OSF/1

-	    SHLIB_CFLAGS=""

-	    SHLIB_LD='ld -shared -expect_unresolved "*"'

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS=""

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'

-	    ;;

-	RISCos-*)

-	    SHLIB_CFLAGS="-G 0"

-	    SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".a"

-	    DL_OBJS="tclLoadAout.o"

-	    DL_LIBS=""

-	    LD_FLAGS="-Wl,-D,08000000"

-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

-	    ;;

-	SCO_SV-3.2*)

-	    # Note, dlopen is available only on SCO 3.2.5 and greater.  However,

-	    # this test works, since "uname -s" was non-standard in 3.2.4 and

-	    # below.

-	    SHLIB_CFLAGS="-Kpic -belf"

-	    SHLIB_LD="ld -G"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS=""

-	    LD_FLAGS="-belf -Wl,-Bexport"

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	SINIX*5.4*)

-	    SHLIB_CFLAGS="-K PIC"

-	    SHLIB_LD="cc -G"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS=""

-	    ;;

-	SunOS-4*)

-	    SHLIB_CFLAGS="-PIC"

-	    SHLIB_LD="ld"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

-

-	    # SunOS can't handle version numbers with dots in them in library

-	    # specs, like -ltcl7.5, so use -ltcl75 instead.  Also, it

-	    # requires an extra version number at the end of .so file names.

-	    # So, the library has to have a name like libtcl75.so.1.0

-

-	    TCL_SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'

-	    TCL_UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'

-	    TCL_LIB_VERSIONS_OK=nodots

-	    ;;

-	SunOS-5.[[0-6]]*)

-	    SHLIB_CFLAGS="-KPIC"

-	    SHLIB_LD="/usr/ccs/bin/ld -G -z text"

-

-	    # Note: need the LIBS below, otherwise Tk won't find Tcl's

-	    # symbols when dynamically loaded into tclsh.

-

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    LD_FLAGS=""

-	    LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'

-	    ;;

-	SunOS-5*)

-	    SHLIB_CFLAGS="-KPIC"

-	    SHLIB_LD="/usr/ccs/bin/ld -G -z text"

-	    LD_FLAGS=""

-    

-	    do64bit_ok=no

-	    if test "$do64bit" = "yes" ; then

-	    arch=`isainfo`

-	    if test "$arch" = "sparcv9 sparc" ; then

-		if test "$CC" != "gcc" -a `$CC -v 2>&1 | grep -c gcc` = "0" ; then

-		do64bit_ok=yes

-		EXTRA_CFLAGS="-xarch=v9"

-		LD_FLAGS="-xarch=v9"

-		else 

-		AC_MSG_WARN("64bit mode not supported using GCC on $system")

-		fi

-	    else

-		AC_MSG_WARN("64bit mode only supported sparcv9 system")

-	    fi

-	    fi

-	    

-	    # Note: need the LIBS below, otherwise Tk won't find Tcl's

-	    # symbols when dynamically loaded into tclsh.

-

-	    SHLIB_LD_LIBS='${LIBS}'

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then

-		LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'

-	    else

-		LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'

-	    fi

-	    ;;

-	ULTRIX-4.*)

-	    SHLIB_CFLAGS="-G 0"

-	    SHLIB_SUFFIX=".a"

-	    SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"

-	    SHLIB_LD_LIBS='${LIBS}'

-	    DL_OBJS="tclLoadAout.o"

-	    DL_LIBS=""

-	    LD_FLAGS="-Wl,-D,08000000"

-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

-	    ;;

-	UNIX_SV* | UnixWare-5*)

-	    SHLIB_CFLAGS="-KPIC"

-	    SHLIB_LD="cc -G"

-	    SHLIB_LD_LIBS=""

-	    SHLIB_SUFFIX=".so"

-	    DL_OBJS="tclLoadDl.o"

-	    DL_LIBS="-ldl"

-	    # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers

-	    # that don't grok the -Bexport option.  Test that it does.

-	    hold_ldflags=$LDFLAGS

-	    AC_MSG_CHECKING(for ld accepts -Bexport flag)

-	    LDFLAGS="${LDFLAGS} -Wl,-Bexport"

-	    AC_TRY_LINK(, [int i;], found=yes, found=no)

-	    LDFLAGS=$hold_ldflags

-	    AC_MSG_RESULT($found)

-	    if test $found = yes; then

-	    LD_FLAGS="-Wl,-Bexport"

-	    else

-	    LD_FLAGS=""

-	    fi

-	    LD_SEARCH_FLAGS=""

-	    ;;

-    esac

-

-    if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then

-    AC_MSG_WARN("64bit support being disabled -- not supported on this platform")

-    fi

-

-    # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic

-    # Loading for Tcl -- What Became of It?".  Proc. 2nd Tcl/Tk Workshop,

-    # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need

-    # to determine which of several header files defines the a.out file

-    # format (a.out.h, sys/exec.h, or sys/exec_aout.h).  At present, we

-    # support only a file format that is more or less version-7-compatible. 

-    # In particular,

-    #	- a.out files must begin with `struct exec'.

-    #	- the N_TXTOFF on the `struct exec' must compute the seek address

-    #	  of the text segment

-    #	- The `struct exec' must contain a_magic, a_text, a_data, a_bss

-    #	  and a_entry fields.

-    # The following compilation should succeed if and only if either sys/exec.h

-    # or a.out.h is usable for the purpose.

-    #

-    # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the

-    # `struct exec' includes a second header that contains information that

-    # duplicates the v7 fields that are needed.

-

-    if test "x$DL_OBJS" = "xtclLoadAout.o" ; then

-	AC_MSG_CHECKING(sys/exec.h)

-	AC_TRY_COMPILE([#include <sys/exec.h>],[

-	    struct exec foo;

-	    unsigned long seek;

-	    int flag;

-#if defined(__mips) || defined(mips)

-	    seek = N_TXTOFF (foo.ex_f, foo.ex_o);

-#else

-	    seek = N_TXTOFF (foo);

-#endif

-	    flag = (foo.a_magic == OMAGIC);

-	    return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;

-    ], tcl_ok=usable, tcl_ok=unusable)

-	AC_MSG_RESULT($tcl_ok)

-	if test $tcl_ok = usable; then

-	    AC_DEFINE(USE_SYS_EXEC_H)

-	else

-	    AC_MSG_CHECKING(a.out.h)

-	    AC_TRY_COMPILE([#include <a.out.h>],[

-		struct exec foo;

-		unsigned long seek;

-		int flag;

-#if defined(__mips) || defined(mips)

-		seek = N_TXTOFF (foo.ex_f, foo.ex_o);

-#else

-		seek = N_TXTOFF (foo);

-#endif

-		flag = (foo.a_magic == OMAGIC);

-		return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;

-	    ], tcl_ok=usable, tcl_ok=unusable)

-	    AC_MSG_RESULT($tcl_ok)

-	    if test $tcl_ok = usable; then

-		AC_DEFINE(USE_A_OUT_H)

-	    else

-		AC_MSG_CHECKING(sys/exec_aout.h)

-		AC_TRY_COMPILE([#include <sys/exec_aout.h>],[

-		    struct exec foo;

-		    unsigned long seek;

-		    int flag;

-#if defined(__mips) || defined(mips)

-		    seek = N_TXTOFF (foo.ex_f, foo.ex_o);

-#else

-		    seek = N_TXTOFF (foo);

-#endif

-		    flag = (foo.a_midmag == OMAGIC);

-		    return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;

-		], tcl_ok=usable, tcl_ok=unusable)

-		AC_MSG_RESULT($tcl_ok)

-		if test $tcl_ok = usable; then

-		    AC_DEFINE(USE_SYS_EXEC_AOUT_H)

-		else

-		    DL_OBJS=""

-		fi

-	    fi

-	fi

-    fi

-

-    # Step 5: disable dynamic loading if requested via a command-line switch.

-

-    AC_ARG_ENABLE(load, [  --disable-load          disallow dynamic loading and "load" command],

-	[tcl_ok=$enableval], [tcl_ok=yes])

-    if test "$tcl_ok" = "no"; then

-	DL_OBJS=""

-    fi

-

-    if test "x$DL_OBJS" != "x" ; then

-	BUILD_DLTEST="\$(DLTEST_TARGETS)"

-    else

-	echo "Can't figure out how to do dynamic loading or shared libraries"

-	echo "on this system."

-	SHLIB_CFLAGS=""

-	SHLIB_LD=""

-	SHLIB_SUFFIX=""

-	DL_OBJS="tclLoadNone.o"

-	DL_LIBS=""

-	LD_FLAGS=""

-	LD_SEARCH_FLAGS=""

-	BUILD_DLTEST=""

-    fi

-

-    # If we're running gcc, then change the C flags for compiling shared

-    # libraries to the right flags for gcc, instead of those for the

-    # standard manufacturer compiler.

-

-    if test "$DL_OBJS" != "tclLoadNone.o" ; then

-	if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then

-	    case $system in

-		AIX-*)

-		    ;;

-		BSD/OS*)

-		    ;;

-		IRIX*)

-		    ;;

-		NetBSD-*|FreeBSD-*|OpenBSD-*)

-		    ;;

-		RISCos-*)

-		    ;;

-		ULTRIX-4.*)

-		    ;;

-		*)

-		    SHLIB_CFLAGS="-fPIC"

-		    ;;

-	    esac

-	fi

-    fi

-])

-

+#------------------------------------------------------------------------
+# SC_PATH_TCLCONFIG --
+#
+#	Locate the tclConfig.sh file and perform a sanity check on
+#	the Tcl compile flags
+#	Currently a no-op for Windows
+#
+# Arguments:
+#	PATCH_LEVEL	The patch level for Tcl if any.
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--with-tcl=...
+#
+#	Defines the following vars:
+#		TCLCONFIG	Full path to the tclConfig.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_PATH_TCLCONFIG, [
+    AC_MSG_CHECKING([the location of tclConfig.sh])
+
+    if test -d ../../tcl8.1$1/win;  then
+	TCLCONFIG_DEFAULT=../../tcl8.1$1/win
+    else
+	TCLCONFIG_DEFAULT=../../tcl8.1/win
+    fi
+    
+    AC_ARG_WITH(tcl, [  --with-tcl=DIR          use Tcl 8.1 binaries from DIR],
+	    TCLCONFIG=$withval, TCLCONFIG=`cd $TCLCONFIG_DEFAULT; pwd`)
+    if test ! -d $TCLCONFIG; then
+	AC_MSG_ERROR(Tcl directory $TCLCONFIG does not exist)
+    fi
+    if test ! -f $TCLCONFIG/tclConfig.sh; then
+	AC_MSG_ERROR(There is no tclConfig.sh in $TCLCONFIG:  perhaps you did not specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?)
+    fi
+
+    AC_MSG_RESULT([$TCLCONFIG])
+])
+
+#------------------------------------------------------------------------
+# SC_PATH_TKCONFIG --
+#
+#	Locate the tkConfig.sh file
+#	Currently a no-op for Windows
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--with-tk=...
+#
+#	Defines the following vars:
+#		TKCONFIG	Full path to the tkConfig.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_PATH_TKCONFIG, [
+    AC_MSG_CHECKING([the location of tkConfig.sh])
+
+    if test -d ../../tk8.1$1/win;  then
+	TKCONFIG_DEFAULT=../../tk8.1$1/win
+    else
+	TKCONFIG_DEFAULT=../../tk8.1/win
+    fi
+    
+    AC_ARG_WITH(tk, [  --with-tk=DIR          use Tk 8.1 binaries from DIR],
+	    TKCONFIG=$withval, TKCONFIG=`cd $TKCONFIG_DEFAULT; pwd`)
+    if test ! -d $TKCONFIG; then
+	AC_MSG_ERROR(Tk directory $TKCONFIG does not exist)
+    fi
+    if test ! -f $TKCONFIG/tkConfig.sh; then
+	AC_MSG_ERROR(There is no tkConfig.sh in $TKCONFIG:  perhaps you did not specify the Tk *build* directory (not the toplevel Tk directory) or you forgot to configure Tk?)
+    fi
+
+    AC_MSG_RESULT([$TKCONFIG])
+])
+
+#------------------------------------------------------------------------
+# SC_LOAD_TCLCONFIG --
+#
+#	Load the tclConfig.sh file
+#	Currently a no-op for Windows
+#
+# Arguments:
+#	
+#	Requires the following vars to be set:
+#		TCLCONFIG
+#
+# Results:
+#
+#	Sets the following vars that should be in tclConfig.sh:
+#		TCL_BIN_DIR
+#		TCL_SRC_DIR
+#		TCL_LIB_FILE
+#	Defines the following vars:
+#		TCL_THREADS
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_LOAD_TCLCONFIG, [
+    if test -f "$TCLCONFIG" ; then
+	echo "loading $TCLCONFIG"
+	. $TCLCONFIG
+    fi
+
+    if test $TCL_THREADS = 1; then
+	AC_DEFINE(TCL_THREADS)
+    fi
+])
+
+#------------------------------------------------------------------------
+# SC_LOAD_TKCONFIG --
+#
+#	Load the tkConfig.sh file
+#	Currently a no-op for Windows
+#
+# Arguments:
+#	
+#	Requires the following vars to be set:
+#		TKCONFIG
+#
+# Results:
+#
+#	Sets the following vars that should be in tkConfig.sh:
+#		TK_BIN_DIR
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_LOAD_TKCONFIG, [
+    if test -f "$TKCONFIG" ; then
+	echo "loading $TKCONFIG"
+	. $TKCONFIG
+    fi
+])
+
+#------------------------------------------------------------------------
+# SC_ENABLE_GCC --
+#
+#	Allows the use of GCC if available
+#
+# Arguments:
+#	none
+#	
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--enable-gcc
+#
+#	Defines the following vars:
+#		CC	Command to use for the compiler
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_ENABLE_GCC, [
+    AC_ARG_ENABLE(gcc, [  --enable-gcc            allow use of gcc if available [--disable-gcc]],
+	[ok=$enableval], [ok=no])
+    if test "$ok" = "yes"; then
+	CC=gcc
+    else
+	CC=cl
+    fi
+])
+
+#------------------------------------------------------------------------
+# SC_ENABLE_SHARED --
+#
+#	Allows the building of shared libraries
+#
+# Arguments:
+#	none
+#	
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--enable-shared=yes|no
+#
+#	Defines the following vars:
+#		SHARED_BUILD	Value of 1 or 0
+#		STATIC_BUILD
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_ENABLE_SHARED, [
+    AC_MSG_CHECKING([how to build libraries])
+    AC_ARG_ENABLE(shared,
+	[  --enable-shared         build and link with shared libraries [--enable-shared]],
+    [tcl_ok=$enableval], [tcl_ok=yes])
+
+    if test "${enable_shared+set}" = set; then
+	enableval="$enable_shared"
+	tcl_ok=$enableval
+    else
+	tcl_ok=yes
+    fi
+
+    if test "$tcl_ok" = "yes" ; then
+	AC_MSG_RESULT([shared])
+	SHARED_BUILD=1
+    else
+	AC_MSG_RESULT([static])
+	SHARED_BUILD=0
+	AC_DEFINE(STATIC_BUILD)
+    fi
+])
+
+#------------------------------------------------------------------------
+# SC_ENABLE_THREADS --
+#
+#	Specify if thread support should be enabled
+#
+# Arguments:
+#	none
+#	
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--enable-threads=yes|no
+#
+#	Defines the following vars:
+#		TCL_THREADS
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_ENABLE_THREADS, [
+    AC_MSG_CHECKING(for building with threads)
+    AC_ARG_ENABLE(threads, [  --enable-threads        build with threads],
+	[tcl_ok=$enableval], [tcl_ok=no])
+    if test "$tcl_ok" = "yes"; then
+	AC_MSG_RESULT(yes)
+	AC_DEFINE(TCL_THREADS)
+    else
+	AC_MSG_RESULT(no (default))
+    fi
+])
+
+#------------------------------------------------------------------------
+# SC_ENABLE_SYMBOLS --
+#
+#	Specify if debugging symbols should be used
+#
+# Arguments:
+#	none
+#	
+#	Requires the following vars to be set:
+#		CFLAGS_DEBUG
+#		CFLAGS_OPTIMIZE
+#	
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--enable-symbols
+#
+#	Defines the following vars:
+#		CFLAGS_DEFAULT	Sets to CFLAGS_DEBUG if true
+#				Sets to CFLAGS_OPTIMIZE if false
+#		LD_FLAGS_DEFAULT	Sets to LDFLAGS_DEBUG if true
+#				Sets to LDFLAGS_OPTIMIZE if false
+#		DBGX		Debug library extension
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_ENABLE_SYMBOLS, [
+    AC_MSG_CHECKING([for build with symbols])
+    AC_ARG_ENABLE(symbols, [  --enable-symbols        build with debugging symbols [--disable-symbols]],    [tcl_ok=$enableval], [tcl_ok=no])
+
+    if test "$tcl_ok" = "yes"; then
+	CFLAGS_DEFAULT='${CFLAGS_DEBUG}'
+	LD_FLAGS_DEFAULT='${LDFLAGS_DEBUG}'
+	DBGX=d
+	AC_MSG_RESULT([yes])
+    else
+	CFLAGS_DEFAULT='${CFLAGS_OPTIMIZE}'
+	LD_FLAGS_DEFAULT='${LDFLAGS_OPTIMIZE}'
+	DBGX=""
+	AC_MSG_RESULT([no])
+    fi
+])
+
+
+#--------------------------------------------------------------------
+# SC_TCL_CONFIG_CFLAGS
+#
+#	Try to determine the proper flags to pass to the compiler
+#	for building shared libraries and other such nonsense.
+#
+#	NOTE: The backslashes in quotes below are substituted twice
+#	due to the fact that they are in a macro and then inlined
+#	in the final configure script.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Defines the following vars for all compilers:
+#    		EXTRA_CFLAGS
+#    		CFLAGS_DEBUG
+#    		CFLAGS_OPTIMIZE
+#    		CFLAGS_WARNING
+#    		LDFLAGS_DEBUG
+#    		LDFLAGS_OPTIMIZE
+#    		PATHTYPE
+#    		CC_OBJNAME
+#    		CC_EXENAME
+#
+#	Defines the following vars for non-gcc compilers
+#    		SHLIB_LD
+#    		SHLIB_LD_LIBS
+#    		LIBS
+#    		AR
+#    		MAKE_LIB
+#    		MAKE_EXE
+#    		MAKE_DLL
+#
+#    		LIBSUFFIX
+#    		LIBRARIES
+#    		EXESUFFIX
+#    		DLLSUFFIX
+#
+#--------------------------------------------------------------------
+
+AC_DEFUN(SC_TCL_CONFIG_CFLAGS, [
+    AC_MSG_CHECKING([compiler flags])
+    EXTRA_CFLAGS=""
+    # set various compiler flags depending on whether we are using gcc or cl
+    
+    if test "${GCC}" = "yes" ; then
+	CFLAGS_DEBUG=-g
+	CFLAGS_OPTIMIZE=-O
+	CFLAGS_WARNING="-Wall -Wconversion"
+	LDFLAGS_DEBUG=-g
+	LDFLAGS_OPTIMIZE=-O
+	PATHTYPE=-u
+	
+	# Specify the CC output file names based on the target name
+	CC_OBJNAME="-o \[$]@"
+	CC_EXENAME="-o \[$]@"
+    else
+	SHLIB_LD="link -dll -nologo"
+	SHLIB_LD_LIBS="user32.lib advapi32.lib"
+	LIBS="user32.lib advapi32.lib"
+	AR="lib -nologo"
+	MAKE_LIB="\${AR} -out:\[$]@"
+	MAKE_EXE="\${CC} -Fe\[$]@"
+	
+	if test "${SHARED_BUILD}" = "0" ; then
+	    # static
+	    echo "building static version"
+	    runtime=-MT
+	    MAKE_DLL="echo "
+	    LIBSUFFIX="s\${DBGX}.lib"
+	    LIBRARIES="\${STATIC_LIBRARIES}"
+	    EXESUFFIX="s\${DBGX}.exe"
+	    DLLSUFFIX=""
+	else
+	    # dynamic
+	    echo "building dynamic version"
+	    runtime=-MD
+	    MAKE_DLL="\${SHLIB_LD} \${SHLIB_LD_LIBS} -out:\[$]@"
+	    LIBSUFFIX="\${DBGX}.lib"
+	    DLLSUFFIX="\${DBGX}.dll"
+	    EXESUFFIX="\${DBGX}.exe"
+	    LIBRARIES="\${SHARED_LIBRARIES}"
+	fi
+
+	EXTRA_CFLAGS="-YX"
+	CFLAGS_DEBUG="-nologo -Z7 -Od -WX ${runtime}d"
+	CFLAGS_OPTIMIZE="-nologo -O2 -Gs -GD ${runtime}"
+	CFLAGS_WARNING="-W3"
+	LDFLAGS_DEBUG="-debug"
+	LDFLAGS_OPTIMIZE="-release"
+	PATHTYPE=-w
+	
+	# Specify the CC output file names based on the target name
+	CC_OBJNAME="-Fo\[$]@"
+	CC_EXENAME="-Fe\[$]@"
+    fi
+    AC_MSG_RESULT([done])
+])
+
+#------------------------------------------------------------------------
+# SC_WITH_TCL --
+#
+#	Location of the Tcl build directory.
+#
+# Arguments:
+#	none
+#
+# Results:
+#
+#	Adds the following arguments to configure:
+#		--with-tcl=...
+#
+#	Defines the following vars:
+#		TCL_BIN_DIR	Full path to the tcl build dir.
+#------------------------------------------------------------------------
+
+AC_DEFUN(SC_WITH_TCL, [
+    if test -d ../../tcl8.1$1/win;  then
+	TCL_BIN_DEFAULT=../../tcl8.1$1/win
+    else
+	TCL_BIN_DEFAULT=../../tcl8.1/win
+    fi
+    
+    AC_ARG_WITH(tcl, [  --with-tcl=DIR          use Tcl 8.1 binaries from DIR],
+	    TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd $TCL_BIN_DEFAULT; pwd`)
+    if test ! -d $TCL_BIN_DIR; then
+	AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR does not exist)
+    fi
+    if test ! -f $TCL_BIN_DIR/Makefile; then
+	AC_MSG_ERROR(There is no Makefile in $TCL_BIN_DIR:  perhaps you did not specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?)
+    else
+	echo "building against Tcl binaries in: $TCL_BIN_DIR"
+    fi
+    AC_SUBST(TCL_BIN_DIR)
+])
+