Fix bug in "make dist" when system-encoding is UTF-8: eolFix will then translate some windows-specific files to UTF-8 too.

Solution: commit those files with CRLF line-ending, which eliminates the need for eolFix altgether.
See als: [495120] for the reason why eolFix was introduced in the first place. No longer needed with fossil.

1 files changed, 597 insertions, 597 deletions

diff --git a/win/makefile.bc b/win/makefile.bc
index 3310b01..6421682 100644
--- a/win/makefile.bc
+++ b/win/makefile.bc
@@ -1,597 +1,597 @@
-#
-# Makefile for Borland C++ 5.5 (or C++ Builder 5), adapted from the makefile
-#   for Visual C++ that came with tcl 8.3.3
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Copyright (c) 1995-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-1999 by Scriptics Corporation.
-
-# TIP #59 information.
-#
-# This makefile does not set the following configuration cpp
-# defines. Behind the defines are the makefile variables listed to set
-# to -D... when that feature is enabled.
-#
-# - TCL_CFG_PROFILED		PROFDEFINES
-# - TCL_CFG_OPTIMIZED		OPTDEFINES
-# - TCL_CFG_DO64BIT		SIXFOURDEFINES
-
-# Have a look at the complete description on how to build and test Tcl with
-# the current Borland compilers at www.ratiosoft.com/tcl/borland.
-#
-# Usage:
-#   - Adapt the paths below to match your compiler's location
-#   - Make sure the compiler's bin directory is on your path
-#   - Open a console
-#   - To make a debug version enter
-#       make -fmakefile.bc -DNODEBUG=0 xxx
-#     where 'xxx' is the target you want (e.g. 'all', 'test', ...)
-#     Please note: I omitted the 'd' suffix for debug versions because Tcl
-#     will always call tclpip83.dll and not tclpip83d.dll, causing an error.
-#                                                   ^
-#     Besides, the debug version goes into a separate directory, so there
-#     should be no problem having DLLs and EXEs with the same name.
-#     If you prefer your debug version having the 'd' suffix just uncomment
-#     the line
-#         #DBGX        = d
-#
-#   - To make a 'normal' version enter
-#       make -fmakefile.bc xxx
-#     where 'xxx' is the target you want (e.g. 'all', 'test', ...)
-#
-# DISCLAIMER:
-# This makefile has an experimental status - that is those targets which
-# have been modified do in fact compile and link with Borland's C++
-# Builder 5 and with the free Borland compiler (Borland C++ 5.5).
-# However the author assumes no responsiblity for any effect which the use of
-# this makefile or of the resulting programs might have on your system.
-#
-# Not yet modified:
-#   - The 'plug-in-DLL' and the associated shell.
-#   - The programs to create the windows help files.
-#
-# Suggestions and / or improvements are always welcome.
-#
-# May 2001, H. Giese (hgiese@ratiosoft.com)
-#
-
-# Does not depend on the presence of any environment variables in
-# order to compile tcl; all needed information is derived from
-# location of the compiler directories.
-
-#
-# Project directories
-#
-# ROOT    = top of source tree
-#
-# TOOLS32 = location of Borland development tools.
-#
-# INSTALLDIR = where the install-targets should copy the binaries and
-#     support files
-#
-
-ROOT		= ..
-INSTALLDIR	= c:\program files\tcl
-
-# If you have C++ Builder 5 or the free Borland C++ 5.5 compiler
-# adapt the following paths as appropriate for your system
-TOOLS32		= c:\dev\bcc55
-TOOLS32_rc	= c:\dev\bcc55
-#TOOLS32	= c:\bc55
-#TOOLS32_rc	= c:\bc55
-
-cc32		= "$(TOOLS32)\bin\bcc32.exe"
-link32		= "$(TOOLS32)\bin\ilink32.exe"
-lib32		= "$(TOOLS32)\bin\tlib.exe"
-rc32		= "$(TOOLS32_rc)\bin\brcc32.exe"
-include32	= -I"$(TOOLS32)\include"
-libpath32	= -L"$(TOOLS32)\lib"
-
-# Uncomment the following line to compile with thread support
-#THREADDEFINES	= -DTCL_THREADS=1
-
-# Allow definition of NDEBUG via command line
-# Set NODEBUG to 0 to compile with symbols
-!if !defined(NODEBUG)
-NODEBUG		= 1
-!endif
-
-#	CFG_ENCODING=encoding
-#		name of encoding for configuration information. Defaults
-#		to cp1252
-!if !defined(CFG_ENCODING)
-CFG_ENCODING	= \"cp1252\"
-!endif
-
-# The following defines can be used to control the amount of debugging
-# code that is added to the compilation.
-#
-# -DTCL_MEM_DEBUG   Enables the debugging memory allocator.
-# -DTCL_COMPILE_DEBUG Enables byte compilation logging.
-# -DTCL_COMPILE_STATS Enables byte compilation statistics gathering.
-# -DUSE_TCLALLOC=0  Disables the Tcl memory allocator in favor
-#       of the native malloc implementation.  This is
-#       needed when using Purify.
-#
-#DEBUGDEFINES	= -DTCL_MEM_DEBUG -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
-#DEBUGDEFINES	= -DUSE_TCLALLOC=0
-
-######################################################################
-# Do not modify below this line
-######################################################################
-
-NAMEPREFIX	= tcl
-STUBPREFIX	= $(NAMEPREFIX)stub
-DOTVERSION	= 8.5
-VERSION		= 85
-
-DDEVERSION = 13
-DDEDOTVERSION = 1.3
-
-REGVERSION = 12
-REGDOTVERSION = 1.2
-
-BINROOT		= ..
-!IF "$(NODEBUG)" == "1"
-TMPDIRNAME	= Release
-DBGX		=
-SYMDEFINES	= -DNDEBUG
-!ELSE
-TMPDIRNAME	= Debug
-#DBGX		= d
-DBGX		=
-SYMDEFINES	= -DTCL_CFG_DEBUG
-!ENDIF
-TMPDIR		= $(BINROOT)\$(TMPDIRNAME)
-OUTDIRNAME	= $(TMPDIRNAME)
-OUTDIR		= $(TMPDIR)
-
-TCLLIB		= $(OUTDIR)\$(NAMEPREFIX)$(VERSION)$(DBGX).lib
-TCLDLLNAME	= $(NAMEPREFIX)$(VERSION)$(DBGX).dll
-TCLDLL		= $(OUTDIR)\$(TCLDLLNAME)
-
-TCLSTUBLIBNAME	= $(STUBPREFIX)$(VERSION)$(DBGX).lib
-TCLSTUBLIB	= $(OUTDIR)\$(TCLSTUBLIBNAME)
-
-TCLPLUGINLIB	= $(OUTDIR)\$(NAMEPREFIX)$(VERSION)p$(DBGX).lib
-TCLPLUGINDLLNAME	= $(NAMEPREFIX)$(VERSION)p$(DBGX).dll
-TCLPLUGINDLL	= $(OUTDIR)\$(TCLPLUGINDLLNAME)
-TCLSH		= $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe
-TCLSHP		= $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe
-TCLPIPEDLLNAME	= $(NAMEPREFIX)pip$(VERSION)$(DBGX).dll
-TCLPIPEDLL	= $(OUTDIR)\$(TCLPIPEDLLNAME)
-TCLREGDLLNAME	= $(NAMEPREFIX)reg$(REGVERSION)$(DBGX).dll
-TCLREGDLL	= $(OUTDIR)\$(TCLREGDLLNAME)
-TCLDDEDLLNAME	= $(NAMEPREFIX)dde$(DDEVERSION)$(DBGX).dll
-TCLDDEDLL	= $(OUTDIR)\$(TCLDDEDLLNAME)
-TCLTEST		= $(OUTDIR)\$(NAMEPREFIX)test.exe
-CAT32		= $(TMPDIR)\cat32.exe
-RMDIR		= .\rmd.bat
-MKDIR		= .\mkd.bat
-RM		= del
-
-LIB_INSTALL_DIR	= $(INSTALLDIR)\lib
-BIN_INSTALL_DIR	= $(INSTALLDIR)\bin
-SCRIPT_INSTALL_DIR	= $(INSTALLDIR)\lib\tcl$(DOTVERSION)
-INCLUDE_INSTALL_DIR	= $(INSTALLDIR)\include
-
-TCLSHOBJS	= \
-	$(TMPDIR)\tclAppInit.obj
-
-TCLTESTOBJS	= \
-	$(TMPDIR)\tclTest.obj \
-	$(TMPDIR)\tclTestObj.obj \
-	$(TMPDIR)\tclTestProcBodyObj.obj \
-	$(TMPDIR)\tclThreadTest.obj \
-	$(TMPDIR)\tclWinTest.obj \
-	$(TMPDIR)\testMain.obj
-
-TCLOBJS	= \
-	$(TMPDIR)\regcomp.obj \
-	$(TMPDIR)\regexec.obj \
-	$(TMPDIR)\regfree.obj \
-	$(TMPDIR)\regerror.obj \
-	$(TMPDIR)\tclAlloc.obj \
-	$(TMPDIR)\tclAsync.obj \
-	$(TMPDIR)\tclBasic.obj \
-	$(TMPDIR)\tclBinary.obj \
-	$(TMPDIR)\tclCkalloc.obj \
-	$(TMPDIR)\tclClock.obj \
-	$(TMPDIR)\tclCmdAH.obj \
-	$(TMPDIR)\tclCmdIL.obj \
-	$(TMPDIR)\tclCmdMZ.obj \
-	$(TMPDIR)\tclCompCmds.obj \
-	$(TMPDIR)\tclCompExpr.obj \
-	$(TMPDIR)\tclCompile.obj \
-	$(TMPDIR)\tclConfig.obj \
-	$(TMPDIR)\tclDate.obj \
-	$(TMPDIR)\tclDictObj.obj \
-	$(TMPDIR)\tclEncoding.obj \
-	$(TMPDIR)\tclEnv.obj \
-	$(TMPDIR)\tclEvent.obj \
-	$(TMPDIR)\tclExecute.obj \
-	$(TMPDIR)\tclFCmd.obj \
-	$(TMPDIR)\tclFileName.obj \
-	$(TMPDIR)\tclGet.obj \
-	$(TMPDIR)\tclHash.obj \
-	$(TMPDIR)\tclHistory.obj \
-	$(TMPDIR)\tclIndexObj.obj \
-	$(TMPDIR)\tclInterp.obj \
-	$(TMPDIR)\tclIO.obj \
-	$(TMPDIR)\tclIOCmd.obj \
-	$(TMPDIR)\tclIOGT.obj \
-	$(TMPDIR)\tclIOSock.obj \
-	$(TMPDIR)\tclIOUtil.obj \
-	$(TMPDIR)\tclLink.obj \
-	$(TMPDIR)\tclLiteral.obj \
-	$(TMPDIR)\tclListObj.obj \
-	$(TMPDIR)\tclLoad.obj \
-	$(TMPDIR)\tclMain.obj \
-	$(TMPDIR)\tclNamesp.obj \
-	$(TMPDIR)\tclNotify.obj \
-	$(TMPDIR)\tclObj.obj \
-	$(TMPDIR)\tclPanic.obj \
-	$(TMPDIR)\tclParse.obj \
-	$(TMPDIR)\tclPipe.obj \
-	$(TMPDIR)\tclPkg.obj \
-	$(TMPDIR)\tclPkgConfig.obj \
-	$(TMPDIR)\tclPosixStr.obj \
-	$(TMPDIR)\tclPreserve.obj \
-	$(TMPDIR)\tclProc.obj \
-	$(TMPDIR)\tclRegexp.obj \
-	$(TMPDIR)\tclResolve.obj \
-	$(TMPDIR)\tclResult.obj \
-	$(TMPDIR)\tclScan.obj \
-	$(TMPDIR)\tclStringObj.obj \
-	$(TMPDIR)\tclStubInit.obj \
-	$(TMPDIR)\tclStubLib.obj \
-	$(TMPDIR)\tclThread.obj \
-	$(TMPDIR)\tclThreadJoin.obj \
-	$(TMPDIR)\tclTimer.obj \
-	$(TMPDIR)\tclTrace.obj \
-	$(TMPDIR)\tclUtf.obj \
-	$(TMPDIR)\tclUtil.obj \
-	$(TMPDIR)\tclVar.obj \
-	$(TMPDIR)\tclWin32Dll.obj \
-	$(TMPDIR)\tclWinChan.obj \
-	$(TMPDIR)\tclWinConsole.obj \
-	$(TMPDIR)\tclWinSerial.obj \
-	$(TMPDIR)\tclWinError.obj \
-	$(TMPDIR)\tclWinFCmd.obj \
-	$(TMPDIR)\tclWinFile.obj \
-	$(TMPDIR)\tclWinInit.obj \
-	$(TMPDIR)\tclWinLoad.obj \
-	$(TMPDIR)\tclWinNotify.obj \
-	$(TMPDIR)\tclWinPipe.obj \
-	$(TMPDIR)\tclWinSock.obj \
-	$(TMPDIR)\tclWinThrd.obj \
-	$(TMPDIR)\tclWinTime.obj
-
-TCLSTUBOBJS	= $(TMPDIR)\tclStubLib.obj
-
-WINDIR		= $(ROOT)\win
-GENERICDIR	= $(ROOT)\generic
-
-TCL_INCLUDES	= -I"$(WINDIR)" -I"$(GENERICDIR)"
-TCL_DEFINES	= $(DEBUGDEFINES) $(THREADDEFINES) $(SYMDEFINES) \
-			$(PROFDEFINES) $(OPTDEFINES) $(SIXFOURDEFINES) \
-			-DTCL_CFGVAL_ENCODING=${CFG_ENCODING}
-
-######################################################################
-# Compiler flags
-######################################################################
-
-!IF "$(NODEBUG)" == "1"
-# these macros cause maximum optimization and no symbols
-cdebug	= -v- -vi- -O2 -D_DEBUG
-!ELSE
-# these macros enable debugging
-cdebug	= -k -Od -r- -v -vi- -y
-!ENDIF
-
-SYSDEFINES	= _MT;NO_STRICT;_NO_VCL
-
-# declarations common to all compiler options
-cbase	= -c -q -3 -a4 -g0 -tWM -Ve -Vx -X-
-WARNINGS	= -w-rch -w-pch -w-par -w-dup -w-pro -w-dpu
-
-ccons	= -tWC
-
-INCLUDEPATH	= $(include32) $(TCL_INCLUDES)
-
-CFLAGS	= $(cdebug) $(cbase) $(INCLUDEPATH) $(WARNINGS) -D$(SYSDEFINES)
-TCL_CFLAGS	= $(CFLAGS) $(TCL_DEFINES)
-CONS_CFLAGS	= $(CFLAGS) $(TCL_DEFINES) $(ccons)
-
-######################################################################
-# Linker flags
-######################################################################
-
-!IF "$(NODEBUG)" == "1"
-ldebug	=
-!ELSE
-ldebug	= -v
-!ENDIF
-
-# declarations common to all linker options
-LNFLAGS	= -D"" -Gn -I$(TMPDIR) -x $(ldebug) $(libpath32)
-# -Gi: create lib file (is -Gl in doc)
-# -aa: Windows app, -ap: Windows console app
-LNFLAGS_DLL	= -ap -Gi -Tpd
-LNFLAGS_CONS	= -ap -Tpe
-
-LNLIBS	= import32 cw32mt
-
-
-######################################################################
-# Project specific targets
-######################################################################
-
-release:	setup $(TCLSH) dlls
-dlls:		setup $(TCLPIPEDLL) $(TCLREGDLL) $(TCLDDEDLL)
-all:		setup $(TCLSH) dlls $(CAT32)
-tcltest:	setup $(TCLTEST) dlls $(CAT32)
-plugin:		setup $(TCLPLUGINDLL) $(TCLSHP)
-install:	install-binaries install-libraries
-
-test:		setup $(TCLTEST) dlls $(CAT32)
-	set TCL_LIBRARY=$(ROOT)/library
-	$(TCLTEST) $(ROOT)/tests/all.tcl
-
-setup:
-	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) &\
-		echo *** Created directory '$(OUT_DIR)'
-	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) &\
-		echo *** Created directory '$(TMP_DIR)'
-
-
-$(TCLLIB): $(TCLDLL)
-
-$(TCLDLL): $(TCLOBJS) $(TMPDIR)\$(NAMEPREFIX).res
-	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 @&&!
-		$(TCLOBJS), $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
-!
-
-$(TCLSTUBLIB): $(TCLSTUBOBJS)
-	$(lib32) /u $@ $(TCLSTUBOBJS)
-
-$(TCLPLUGINLIB): $(TCLPLUGINDLL)
-
-$(TCLPLUGINDLL): $(TCLOBJS) $(TMPDIR)\tcl.res
-	$(link32) $(ldebug) $(dlllflags) \
-		-out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @&&!
-$(TCLOBJS)
-!
-
-$(TCLSH): $(TCLSHOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
-	$(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
-		$(TCLSHOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
-!
-
-$(TCLSHP): $(TCLSHOBJS) $(TCLPLUGINLIB) $(TMPDIR)\tclsh.res
-	$(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
-		-out:$@ $(conlibsdll) $(TCLPLUGINLIB) $(TCLSHOBJS)
-
-$(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
-	$(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
-		$(TCLTESTOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
-!
-
-$(TCLPIPEDLL): $(WINDIR)\stub16.c
-	$(cc32) $(CFLAGS) -o$(TMPDIR)\stub16.obj $(WINDIR)\stub16.c
-	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
-		$(TMPDIR)\stub16.obj, $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
-
-$(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB)
-	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
-		$(TMPDIR)\tclWinDde.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
-		$(TMPDIR)\$(NAMEPREFIX).res
-
-$(TCLREGDLL): $(TMPDIR)\tclWinReg.obj $(TCLSTUBLIB)
-	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
-		$(TMPDIR)\tclWinReg.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
-		$(TMPDIR)\$(NAMEPREFIX).res
-
-$(CAT32): $(WINDIR)\cat.c
-	$(cc32) $(CONS_CFLAGS) -o$(TMPDIR)\cat.obj $?
-	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
-		$(TMPDIR)\cat.obj, $@, -x, $(LNLIBS),,
-
-install-binaries: $(TCLSH)
-	$(MKDIR) "$(BIN_INSTALL_DIR)"
-	$(MKDIR) "$(LIB_INSTALL_DIR)"
-	@echo Installing $(TCLDLLNAME)
-	@copy "$(TCLDLL)" "$(BIN_INSTALL_DIR)"
-	@copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)"
-	@echo Installing "$(TCLSH)"
-	@copy "$(TCLSH)" "$(BIN_INSTALL_DIR)"
-	@echo Installing $(TCLPIPEDLLNAME)
-	@copy "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)"
-	@echo Installing $(TCLSTUBLIBNAME)
-	@copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)"
-
-install-libraries:
-	-@$(MKDIR) "$(LIB_INSTALL_DIR)"
-	-@$(MKDIR) "$(INCLUDE_INSTALL_DIR)"
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
-	@echo Installing http1.0
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http1.0"
-	-@copy "$(ROOT)\library\http1.0\http.tcl"     "$(SCRIPT_INSTALL_DIR)\http1.0"
-	-@copy "$(ROOT)\library\http1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
-	@echo Installing http2.7
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http2.7"
-	-@copy "$(ROOT)\library\http\http.tcl"     "$(SCRIPT_INSTALL_DIR)\http2.7"
-	-@copy "$(ROOT)\library\http\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"
-	@echo Installing opt0.4
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4"
-	-@copy "$(ROOT)\library\opt\optparse.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
-	-@copy "$(ROOT)\library\opt\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
-	@echo Installing msgcat1.5
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
-	-@copy "$(ROOT)\library\msgcat\msgcat.tcl"   "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
-	-@copy "$(ROOT)\library\msgcat\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
-	@echo Installing tcltest2.3
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
-	-@copy "$(ROOT)\library\tcltest\tcltest.tcl"   "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
-	-@copy "$(ROOT)\library\tcltest\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
-	@echo Installing platform1.0
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\platform1.0"
-	-@copy "$(ROOT)\library\platform\platform.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
-	-@copy "$(ROOT)\library\platform\shell.tcl"    "$(SCRIPT_INSTALL_DIR)\platform1.0"
-	-@copy "$(ROOT)\library\platform\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
-	@echo Installing $(TCLDDEDLLNAME)
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\dde1.3"
-	-@copy "$(TCLDDEDLL)" "$(SCRIPT_INSTALL_DIR)\dde1.3"
-	-@copy "$(ROOT)\library\dde\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\dde1.3"
-	@echo Installing $(TCLREGDLLNAME)
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\reg1.2"
-	-@copy "$(TCLREGDLL)" "$(SCRIPT_INSTALL_DIR)\reg1.2"
-	-@copy "$(ROOT)\library\reg\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\reg1.2"
-	@echo Installing encoding files
-	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\encoding"
-	-@copy "$(ROOT)\library\encoding\*.enc" "$(SCRIPT_INSTALL_DIR)\encoding"
-	@echo Installing library files
-	-@copy "$(GENERICDIR)\tcl.h"         "$(INCLUDE_INSTALL_DIR)"
-	-@copy "$(GENERICDIR)\tclDecls.h"    "$(INCLUDE_INSTALL_DIR)"
-	-@copy "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)"
-	-@copy "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)"
-	-@copy "$(ROOT)\library\init.tcl"    "$(SCRIPT_INSTALL_DIR)"
-	-@copy "$(ROOT)\library\parray.tcl"  "$(SCRIPT_INSTALL_DIR)"
-	-@copy "$(ROOT)\library\safe.tcl"    "$(SCRIPT_INSTALL_DIR)"
-	-@copy "$(ROOT)\library\tclIndex"    "$(SCRIPT_INSTALL_DIR)"
-	-@copy "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)"
-	-@copy "$(ROOT)\library\word.tcl"    "$(SCRIPT_INSTALL_DIR)"
-	-@copy "$(ROOT)\library\auto.tcl"    "$(SCRIPT_INSTALL_DIR)"
-
-#
-# Regenerate the stubs files.
-#
-
-genstubs:
-	tclsh$(VERSION) $(ROOT)\tools\genStubs.tcl $(GENERICDIR) \
-		$(GENERICDIR)\tcl.decls $(GENERICDIR)\tclInt.decls
-
-#
-# Regenerate the windows help files.
-#
-
-TCLTOOLS	= $(ROOT)/tools
-MAN2TCL		= $(TCLTOOLS)/man2tcl
-TCLRTF		= $(TCLTOOLS)/tcl.rtf
-TCLHPJ		= $(TCLTOOLS)/tcl.hpj
-MAN2HELP	= $(TCLTOOLS)/man2help.tcl
-HCRTF		= $(TOOLS32)/bin/hcrtf.exe
-
-winhelp: $(TCLRTF)
-	cd $(TCLTOOLS)
-	start /wait $(HCRTF) -xn $(TCLHPJ)
-
-$(MAN2TCL).exe: $(MAN2TCL).obj
-	cd $(TCLTOOLS)
-	$(cc32) /nologo /G4 /ML /O2 $(MAN2TCL).c
-
-$(TCLRTF): $(MAN2TCL).exe $(TCLSH)
-	cd $(TCLTOOLS)
-	..\win\$(TCLSH) $(MAN2HELP) $(NAMEPREFIX) $(VERSION) $(ROOT)/doc ../../tk$(DOTVERSION)/doc
-
-#
-# Special case object file targets
-#
-$(TMPDIR)\tclWinInit.obj: $(WINDIR)\tclWinInit.c
-	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\testMain.obj: $(WINDIR)\tclAppInit.c
-	$(cc32) $(TCL_CFLAGS) -DTCL_TEST -o$(TMPDIR)\testMain.obj $?
-
-$(TMPDIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
-	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
-	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
-	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
-	$(cc32) $(TCL_CFLAGS) \
-		-DCFG_INSTALL_EXEC_PREFIX=\"$(INSTALL_EXEC_PREFIX)\"	\
-		-DCFG_INSTALL_PREFIX=\"$(INSTALL_PREFIX)\"		\
-		-DCFG_RUNTIME_EXEC_PREFIX=\"$(RUNTIME_EXEC_PREFIX)\"	\
-		-DCFG_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\"		\
-	 -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclAppInit.obj : $(WINDIR)\tclAppInit.c
-	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-# The following objects should be built using the stub interfaces
-
-# tclWinReg: Produces errors in ANSI mode
-$(TMPDIR)\tclWinReg.obj : $(WINDIR)\tclWinReg.c
-	$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
-
-# tclWinDde: Produces errors in ANSI mode
-$(TMPDIR)\tclWinDde.obj : $(WINDIR)\tclWinDde.c
-	$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
-
-
-# The following objects are part of the stub library and should not
-# be built as DLL objects but none of the symbols should be exported
-
-$(TMPDIR)\tclStubLib.obj : $(GENERICDIR)\tclStubLib.c
-	$(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?
-
-
-# Dedependency rules
-
-$(GENERICDIR)\regcomp.c: \
-	$(GENERICDIR)\regguts.h \
-	$(GENERICDIR)\regc_lex.c \
-	$(GENERICDIR)\regc_color.c \
-	$(GENERICDIR)\regc_nfa.c \
-	$(GENERICDIR)\regc_cvec.c \
-	$(GENERICDIR)\regc_locale.c
-
-$(GENERICDIR)\regcustom.h: \
-	$(GENERICDIR)\tclInt.h \
-	$(GENERICDIR)\tclPort.h \
-	$(GENERICDIR)\regex.h
-
-$(GENERICDIR)\regexec.c: \
-	$(GENERICDIR)\rege_dfa.c \
-	$(GENERICDIR)\regguts.h
-
-$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h
-
-#
-# Implicit rules
-#
-
-{$(WINDIR)}.c{$(TMPDIR)}.obj:
-	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(GENERICDIR)}.c{$(TMPDIR)}.obj:
-	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(ROOT)\compat}.c{$(TMPDIR)}.obj:
-	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(WINDIR)}.rc{$(TMPDIR)}.res:
-	$(rc32) $(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
-
-clean:
-	-@$(RM) $(OUTDIR)\*.exp
-	-@$(RM) $(OUTDIR)\*.lib
-	-@$(RM) $(OUTDIR)\*.dll
-	-@$(RM) $(OUTDIR)\*.exe
-	-@$(RM) $(OUTDIR)\*.pdb
-	-@$(RM) $(TMPDIR)\*.pch
-	-@$(RM) $(TMPDIR)\*.obj
-	-@$(RM) $(TMPDIR)\*.res
-	-@$(RM) $(TMPDIR)\*.exe
-	-@$(RMDIR) $(OUTDIR)
-	-@$(RMDIR) $(TMPDIR)
+#

+# Makefile for Borland C++ 5.5 (or C++ Builder 5), adapted from the makefile

+#   for Visual C++ that came with tcl 8.3.3

+#

+# See the file "license.terms" for information on usage and redistribution

+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.

+#

+# Copyright (c) 1995-1996 Sun Microsystems, Inc.

+# Copyright (c) 1998-1999 by Scriptics Corporation.

+

+# TIP #59 information.

+#

+# This makefile does not set the following configuration cpp

+# defines. Behind the defines are the makefile variables listed to set

+# to -D... when that feature is enabled.

+#

+# - TCL_CFG_PROFILED		PROFDEFINES

+# - TCL_CFG_OPTIMIZED		OPTDEFINES

+# - TCL_CFG_DO64BIT		SIXFOURDEFINES

+

+# Have a look at the complete description on how to build and test Tcl with

+# the current Borland compilers at www.ratiosoft.com/tcl/borland.

+#

+# Usage:

+#   - Adapt the paths below to match your compiler's location

+#   - Make sure the compiler's bin directory is on your path

+#   - Open a console

+#   - To make a debug version enter

+#       make -fmakefile.bc -DNODEBUG=0 xxx

+#     where 'xxx' is the target you want (e.g. 'all', 'test', ...)

+#     Please note: I omitted the 'd' suffix for debug versions because Tcl

+#     will always call tclpip83.dll and not tclpip83d.dll, causing an error.

+#                                                   ^

+#     Besides, the debug version goes into a separate directory, so there

+#     should be no problem having DLLs and EXEs with the same name.

+#     If you prefer your debug version having the 'd' suffix just uncomment

+#     the line

+#         #DBGX        = d

+#

+#   - To make a 'normal' version enter

+#       make -fmakefile.bc xxx

+#     where 'xxx' is the target you want (e.g. 'all', 'test', ...)

+#

+# DISCLAIMER:

+# This makefile has an experimental status - that is those targets which

+# have been modified do in fact compile and link with Borland's C++

+# Builder 5 and with the free Borland compiler (Borland C++ 5.5).

+# However the author assumes no responsiblity for any effect which the use of

+# this makefile or of the resulting programs might have on your system.

+#

+# Not yet modified:

+#   - The 'plug-in-DLL' and the associated shell.

+#   - The programs to create the windows help files.

+#

+# Suggestions and / or improvements are always welcome.

+#

+# May 2001, H. Giese (hgiese@ratiosoft.com)

+#

+

+# Does not depend on the presence of any environment variables in

+# order to compile tcl; all needed information is derived from

+# location of the compiler directories.

+

+#

+# Project directories

+#

+# ROOT    = top of source tree

+#

+# TOOLS32 = location of Borland development tools.

+#

+# INSTALLDIR = where the install-targets should copy the binaries and

+#     support files

+#

+

+ROOT		= ..

+INSTALLDIR	= c:\program files\tcl

+

+# If you have C++ Builder 5 or the free Borland C++ 5.5 compiler

+# adapt the following paths as appropriate for your system

+TOOLS32		= c:\dev\bcc55

+TOOLS32_rc	= c:\dev\bcc55

+#TOOLS32	= c:\bc55

+#TOOLS32_rc	= c:\bc55

+

+cc32		= "$(TOOLS32)\bin\bcc32.exe"

+link32		= "$(TOOLS32)\bin\ilink32.exe"

+lib32		= "$(TOOLS32)\bin\tlib.exe"

+rc32		= "$(TOOLS32_rc)\bin\brcc32.exe"

+include32	= -I"$(TOOLS32)\include"

+libpath32	= -L"$(TOOLS32)\lib"

+

+# Uncomment the following line to compile with thread support

+#THREADDEFINES	= -DTCL_THREADS=1

+

+# Allow definition of NDEBUG via command line

+# Set NODEBUG to 0 to compile with symbols

+!if !defined(NODEBUG)

+NODEBUG		= 1

+!endif

+

+#	CFG_ENCODING=encoding

+#		name of encoding for configuration information. Defaults

+#		to cp1252

+!if !defined(CFG_ENCODING)

+CFG_ENCODING	= \"cp1252\"

+!endif

+

+# The following defines can be used to control the amount of debugging

+# code that is added to the compilation.

+#

+# -DTCL_MEM_DEBUG   Enables the debugging memory allocator.

+# -DTCL_COMPILE_DEBUG Enables byte compilation logging.

+# -DTCL_COMPILE_STATS Enables byte compilation statistics gathering.

+# -DUSE_TCLALLOC=0  Disables the Tcl memory allocator in favor

+#       of the native malloc implementation.  This is

+#       needed when using Purify.

+#

+#DEBUGDEFINES	= -DTCL_MEM_DEBUG -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS

+#DEBUGDEFINES	= -DUSE_TCLALLOC=0

+

+######################################################################

+# Do not modify below this line

+######################################################################

+

+NAMEPREFIX	= tcl

+STUBPREFIX	= $(NAMEPREFIX)stub

+DOTVERSION	= 8.5

+VERSION		= 85

+

+DDEVERSION = 13

+DDEDOTVERSION = 1.3

+

+REGVERSION = 12

+REGDOTVERSION = 1.2

+

+BINROOT		= ..

+!IF "$(NODEBUG)" == "1"

+TMPDIRNAME	= Release

+DBGX		=

+SYMDEFINES	= -DNDEBUG

+!ELSE

+TMPDIRNAME	= Debug

+#DBGX		= d

+DBGX		=

+SYMDEFINES	= -DTCL_CFG_DEBUG

+!ENDIF

+TMPDIR		= $(BINROOT)\$(TMPDIRNAME)

+OUTDIRNAME	= $(TMPDIRNAME)

+OUTDIR		= $(TMPDIR)

+

+TCLLIB		= $(OUTDIR)\$(NAMEPREFIX)$(VERSION)$(DBGX).lib

+TCLDLLNAME	= $(NAMEPREFIX)$(VERSION)$(DBGX).dll

+TCLDLL		= $(OUTDIR)\$(TCLDLLNAME)

+

+TCLSTUBLIBNAME	= $(STUBPREFIX)$(VERSION)$(DBGX).lib

+TCLSTUBLIB	= $(OUTDIR)\$(TCLSTUBLIBNAME)

+

+TCLPLUGINLIB	= $(OUTDIR)\$(NAMEPREFIX)$(VERSION)p$(DBGX).lib

+TCLPLUGINDLLNAME	= $(NAMEPREFIX)$(VERSION)p$(DBGX).dll

+TCLPLUGINDLL	= $(OUTDIR)\$(TCLPLUGINDLLNAME)

+TCLSH		= $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe

+TCLSHP		= $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe

+TCLPIPEDLLNAME	= $(NAMEPREFIX)pip$(VERSION)$(DBGX).dll

+TCLPIPEDLL	= $(OUTDIR)\$(TCLPIPEDLLNAME)

+TCLREGDLLNAME	= $(NAMEPREFIX)reg$(REGVERSION)$(DBGX).dll

+TCLREGDLL	= $(OUTDIR)\$(TCLREGDLLNAME)

+TCLDDEDLLNAME	= $(NAMEPREFIX)dde$(DDEVERSION)$(DBGX).dll

+TCLDDEDLL	= $(OUTDIR)\$(TCLDDEDLLNAME)

+TCLTEST		= $(OUTDIR)\$(NAMEPREFIX)test.exe

+CAT32		= $(TMPDIR)\cat32.exe

+RMDIR		= .\rmd.bat

+MKDIR		= .\mkd.bat

+RM		= del

+

+LIB_INSTALL_DIR	= $(INSTALLDIR)\lib

+BIN_INSTALL_DIR	= $(INSTALLDIR)\bin

+SCRIPT_INSTALL_DIR	= $(INSTALLDIR)\lib\tcl$(DOTVERSION)

+INCLUDE_INSTALL_DIR	= $(INSTALLDIR)\include

+

+TCLSHOBJS	= \

+	$(TMPDIR)\tclAppInit.obj

+

+TCLTESTOBJS	= \

+	$(TMPDIR)\tclTest.obj \

+	$(TMPDIR)\tclTestObj.obj \

+	$(TMPDIR)\tclTestProcBodyObj.obj \

+	$(TMPDIR)\tclThreadTest.obj \

+	$(TMPDIR)\tclWinTest.obj \

+	$(TMPDIR)\testMain.obj

+

+TCLOBJS	= \

+	$(TMPDIR)\regcomp.obj \

+	$(TMPDIR)\regexec.obj \

+	$(TMPDIR)\regfree.obj \

+	$(TMPDIR)\regerror.obj \

+	$(TMPDIR)\tclAlloc.obj \

+	$(TMPDIR)\tclAsync.obj \

+	$(TMPDIR)\tclBasic.obj \

+	$(TMPDIR)\tclBinary.obj \

+	$(TMPDIR)\tclCkalloc.obj \

+	$(TMPDIR)\tclClock.obj \

+	$(TMPDIR)\tclCmdAH.obj \

+	$(TMPDIR)\tclCmdIL.obj \

+	$(TMPDIR)\tclCmdMZ.obj \

+	$(TMPDIR)\tclCompCmds.obj \

+	$(TMPDIR)\tclCompExpr.obj \

+	$(TMPDIR)\tclCompile.obj \

+	$(TMPDIR)\tclConfig.obj \

+	$(TMPDIR)\tclDate.obj \

+	$(TMPDIR)\tclDictObj.obj \

+	$(TMPDIR)\tclEncoding.obj \

+	$(TMPDIR)\tclEnv.obj \

+	$(TMPDIR)\tclEvent.obj \

+	$(TMPDIR)\tclExecute.obj \

+	$(TMPDIR)\tclFCmd.obj \

+	$(TMPDIR)\tclFileName.obj \

+	$(TMPDIR)\tclGet.obj \

+	$(TMPDIR)\tclHash.obj \

+	$(TMPDIR)\tclHistory.obj \

+	$(TMPDIR)\tclIndexObj.obj \

+	$(TMPDIR)\tclInterp.obj \

+	$(TMPDIR)\tclIO.obj \

+	$(TMPDIR)\tclIOCmd.obj \

+	$(TMPDIR)\tclIOGT.obj \

+	$(TMPDIR)\tclIOSock.obj \

+	$(TMPDIR)\tclIOUtil.obj \

+	$(TMPDIR)\tclLink.obj \

+	$(TMPDIR)\tclLiteral.obj \

+	$(TMPDIR)\tclListObj.obj \

+	$(TMPDIR)\tclLoad.obj \

+	$(TMPDIR)\tclMain.obj \

+	$(TMPDIR)\tclNamesp.obj \

+	$(TMPDIR)\tclNotify.obj \

+	$(TMPDIR)\tclObj.obj \

+	$(TMPDIR)\tclPanic.obj \

+	$(TMPDIR)\tclParse.obj \

+	$(TMPDIR)\tclPipe.obj \

+	$(TMPDIR)\tclPkg.obj \

+	$(TMPDIR)\tclPkgConfig.obj \

+	$(TMPDIR)\tclPosixStr.obj \

+	$(TMPDIR)\tclPreserve.obj \

+	$(TMPDIR)\tclProc.obj \

+	$(TMPDIR)\tclRegexp.obj \

+	$(TMPDIR)\tclResolve.obj \

+	$(TMPDIR)\tclResult.obj \

+	$(TMPDIR)\tclScan.obj \

+	$(TMPDIR)\tclStringObj.obj \

+	$(TMPDIR)\tclStubInit.obj \

+	$(TMPDIR)\tclStubLib.obj \

+	$(TMPDIR)\tclThread.obj \

+	$(TMPDIR)\tclThreadJoin.obj \

+	$(TMPDIR)\tclTimer.obj \

+	$(TMPDIR)\tclTrace.obj \

+	$(TMPDIR)\tclUtf.obj \

+	$(TMPDIR)\tclUtil.obj \

+	$(TMPDIR)\tclVar.obj \

+	$(TMPDIR)\tclWin32Dll.obj \

+	$(TMPDIR)\tclWinChan.obj \

+	$(TMPDIR)\tclWinConsole.obj \

+	$(TMPDIR)\tclWinSerial.obj \

+	$(TMPDIR)\tclWinError.obj \

+	$(TMPDIR)\tclWinFCmd.obj \

+	$(TMPDIR)\tclWinFile.obj \

+	$(TMPDIR)\tclWinInit.obj \

+	$(TMPDIR)\tclWinLoad.obj \

+	$(TMPDIR)\tclWinNotify.obj \

+	$(TMPDIR)\tclWinPipe.obj \

+	$(TMPDIR)\tclWinSock.obj \

+	$(TMPDIR)\tclWinThrd.obj \

+	$(TMPDIR)\tclWinTime.obj

+

+TCLSTUBOBJS	= $(TMPDIR)\tclStubLib.obj

+

+WINDIR		= $(ROOT)\win

+GENERICDIR	= $(ROOT)\generic

+

+TCL_INCLUDES	= -I"$(WINDIR)" -I"$(GENERICDIR)"

+TCL_DEFINES	= $(DEBUGDEFINES) $(THREADDEFINES) $(SYMDEFINES) \

+			$(PROFDEFINES) $(OPTDEFINES) $(SIXFOURDEFINES) \

+			-DTCL_CFGVAL_ENCODING=${CFG_ENCODING}

+

+######################################################################

+# Compiler flags

+######################################################################

+

+!IF "$(NODEBUG)" == "1"

+# these macros cause maximum optimization and no symbols

+cdebug	= -v- -vi- -O2 -D_DEBUG

+!ELSE

+# these macros enable debugging

+cdebug	= -k -Od -r- -v -vi- -y

+!ENDIF

+

+SYSDEFINES	= _MT;NO_STRICT;_NO_VCL

+

+# declarations common to all compiler options

+cbase	= -c -q -3 -a4 -g0 -tWM -Ve -Vx -X-

+WARNINGS	= -w-rch -w-pch -w-par -w-dup -w-pro -w-dpu

+

+ccons	= -tWC

+

+INCLUDEPATH	= $(include32) $(TCL_INCLUDES)

+

+CFLAGS	= $(cdebug) $(cbase) $(INCLUDEPATH) $(WARNINGS) -D$(SYSDEFINES)

+TCL_CFLAGS	= $(CFLAGS) $(TCL_DEFINES)

+CONS_CFLAGS	= $(CFLAGS) $(TCL_DEFINES) $(ccons)

+

+######################################################################

+# Linker flags

+######################################################################

+

+!IF "$(NODEBUG)" == "1"

+ldebug	=

+!ELSE

+ldebug	= -v

+!ENDIF

+

+# declarations common to all linker options

+LNFLAGS	= -D"" -Gn -I$(TMPDIR) -x $(ldebug) $(libpath32)

+# -Gi: create lib file (is -Gl in doc)

+# -aa: Windows app, -ap: Windows console app

+LNFLAGS_DLL	= -ap -Gi -Tpd

+LNFLAGS_CONS	= -ap -Tpe

+

+LNLIBS	= import32 cw32mt

+

+

+######################################################################

+# Project specific targets

+######################################################################

+

+release:	setup $(TCLSH) dlls

+dlls:		setup $(TCLPIPEDLL) $(TCLREGDLL) $(TCLDDEDLL)

+all:		setup $(TCLSH) dlls $(CAT32)

+tcltest:	setup $(TCLTEST) dlls $(CAT32)

+plugin:		setup $(TCLPLUGINDLL) $(TCLSHP)

+install:	install-binaries install-libraries

+

+test:		setup $(TCLTEST) dlls $(CAT32)

+	set TCL_LIBRARY=$(ROOT)/library

+	$(TCLTEST) $(ROOT)/tests/all.tcl

+

+setup:

+	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) &\

+		echo *** Created directory '$(OUT_DIR)'

+	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) &\

+		echo *** Created directory '$(TMP_DIR)'

+

+

+$(TCLLIB): $(TCLDLL)

+

+$(TCLDLL): $(TCLOBJS) $(TMPDIR)\$(NAMEPREFIX).res

+	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 @&&!

+		$(TCLOBJS), $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res

+!

+

+$(TCLSTUBLIB): $(TCLSTUBOBJS)

+	$(lib32) /u $@ $(TCLSTUBOBJS)

+

+$(TCLPLUGINLIB): $(TCLPLUGINDLL)

+

+$(TCLPLUGINDLL): $(TCLOBJS) $(TMPDIR)\tcl.res

+	$(link32) $(ldebug) $(dlllflags) \

+		-out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @&&!

+$(TCLOBJS)

+!

+

+$(TCLSH): $(TCLSHOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res

+	$(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!

+		$(TCLSHOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res

+!

+

+$(TCLSHP): $(TCLSHOBJS) $(TCLPLUGINLIB) $(TMPDIR)\tclsh.res

+	$(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \

+		-out:$@ $(conlibsdll) $(TCLPLUGINLIB) $(TCLSHOBJS)

+

+$(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res

+	$(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!

+		$(TCLTESTOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res

+!

+

+$(TCLPIPEDLL): $(WINDIR)\stub16.c

+	$(cc32) $(CFLAGS) -o$(TMPDIR)\stub16.obj $(WINDIR)\stub16.c

+	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \

+		$(TMPDIR)\stub16.obj, $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res

+

+$(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB)

+	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \

+		$(TMPDIR)\tclWinDde.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \

+		$(TMPDIR)\$(NAMEPREFIX).res

+

+$(TCLREGDLL): $(TMPDIR)\tclWinReg.obj $(TCLSTUBLIB)

+	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \

+		$(TMPDIR)\tclWinReg.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \

+		$(TMPDIR)\$(NAMEPREFIX).res

+

+$(CAT32): $(WINDIR)\cat.c

+	$(cc32) $(CONS_CFLAGS) -o$(TMPDIR)\cat.obj $?

+	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \

+		$(TMPDIR)\cat.obj, $@, -x, $(LNLIBS),,

+

+install-binaries: $(TCLSH)

+	$(MKDIR) "$(BIN_INSTALL_DIR)"

+	$(MKDIR) "$(LIB_INSTALL_DIR)"

+	@echo Installing $(TCLDLLNAME)

+	@copy "$(TCLDLL)" "$(BIN_INSTALL_DIR)"

+	@copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)"

+	@echo Installing "$(TCLSH)"

+	@copy "$(TCLSH)" "$(BIN_INSTALL_DIR)"

+	@echo Installing $(TCLPIPEDLLNAME)

+	@copy "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)"

+	@echo Installing $(TCLSTUBLIBNAME)

+	@copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)"

+

+install-libraries:

+	-@$(MKDIR) "$(LIB_INSTALL_DIR)"

+	-@$(MKDIR) "$(INCLUDE_INSTALL_DIR)"

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)"

+	@echo Installing http1.0

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http1.0"

+	-@copy "$(ROOT)\library\http1.0\http.tcl"     "$(SCRIPT_INSTALL_DIR)\http1.0"

+	-@copy "$(ROOT)\library\http1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"

+	@echo Installing http2.7

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http2.7"

+	-@copy "$(ROOT)\library\http\http.tcl"     "$(SCRIPT_INSTALL_DIR)\http2.7"

+	-@copy "$(ROOT)\library\http\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"

+	@echo Installing opt0.4

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4"

+	-@copy "$(ROOT)\library\opt\optparse.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"

+	-@copy "$(ROOT)\library\opt\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"

+	@echo Installing msgcat1.5

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\msgcat1.5"

+	-@copy "$(ROOT)\library\msgcat\msgcat.tcl"   "$(SCRIPT_INSTALL_DIR)\msgcat1.5"

+	-@copy "$(ROOT)\library\msgcat\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"

+	@echo Installing tcltest2.3

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\tcltest2.3"

+	-@copy "$(ROOT)\library\tcltest\tcltest.tcl"   "$(SCRIPT_INSTALL_DIR)\tcltest2.3"

+	-@copy "$(ROOT)\library\tcltest\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"

+	@echo Installing platform1.0

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\platform1.0"

+	-@copy "$(ROOT)\library\platform\platform.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"

+	-@copy "$(ROOT)\library\platform\shell.tcl"    "$(SCRIPT_INSTALL_DIR)\platform1.0"

+	-@copy "$(ROOT)\library\platform\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"

+	@echo Installing $(TCLDDEDLLNAME)

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\dde1.3"

+	-@copy "$(TCLDDEDLL)" "$(SCRIPT_INSTALL_DIR)\dde1.3"

+	-@copy "$(ROOT)\library\dde\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\dde1.3"

+	@echo Installing $(TCLREGDLLNAME)

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\reg1.2"

+	-@copy "$(TCLREGDLL)" "$(SCRIPT_INSTALL_DIR)\reg1.2"

+	-@copy "$(ROOT)\library\reg\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\reg1.2"

+	@echo Installing encoding files

+	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\encoding"

+	-@copy "$(ROOT)\library\encoding\*.enc" "$(SCRIPT_INSTALL_DIR)\encoding"

+	@echo Installing library files

+	-@copy "$(GENERICDIR)\tcl.h"         "$(INCLUDE_INSTALL_DIR)"

+	-@copy "$(GENERICDIR)\tclDecls.h"    "$(INCLUDE_INSTALL_DIR)"

+	-@copy "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)"

+	-@copy "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)"

+	-@copy "$(ROOT)\library\init.tcl"    "$(SCRIPT_INSTALL_DIR)"

+	-@copy "$(ROOT)\library\parray.tcl"  "$(SCRIPT_INSTALL_DIR)"

+	-@copy "$(ROOT)\library\safe.tcl"    "$(SCRIPT_INSTALL_DIR)"

+	-@copy "$(ROOT)\library\tclIndex"    "$(SCRIPT_INSTALL_DIR)"

+	-@copy "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)"

+	-@copy "$(ROOT)\library\word.tcl"    "$(SCRIPT_INSTALL_DIR)"

+	-@copy "$(ROOT)\library\auto.tcl"    "$(SCRIPT_INSTALL_DIR)"

+

+#

+# Regenerate the stubs files.

+#

+

+genstubs:

+	tclsh$(VERSION) $(ROOT)\tools\genStubs.tcl $(GENERICDIR) \

+		$(GENERICDIR)\tcl.decls $(GENERICDIR)\tclInt.decls

+

+#

+# Regenerate the windows help files.

+#

+

+TCLTOOLS	= $(ROOT)/tools

+MAN2TCL		= $(TCLTOOLS)/man2tcl

+TCLRTF		= $(TCLTOOLS)/tcl.rtf

+TCLHPJ		= $(TCLTOOLS)/tcl.hpj

+MAN2HELP	= $(TCLTOOLS)/man2help.tcl

+HCRTF		= $(TOOLS32)/bin/hcrtf.exe

+

+winhelp: $(TCLRTF)

+	cd $(TCLTOOLS)

+	start /wait $(HCRTF) -xn $(TCLHPJ)

+

+$(MAN2TCL).exe: $(MAN2TCL).obj

+	cd $(TCLTOOLS)

+	$(cc32) /nologo /G4 /ML /O2 $(MAN2TCL).c

+

+$(TCLRTF): $(MAN2TCL).exe $(TCLSH)

+	cd $(TCLTOOLS)

+	..\win\$(TCLSH) $(MAN2HELP) $(NAMEPREFIX) $(VERSION) $(ROOT)/doc ../../tk$(DOTVERSION)/doc

+

+#

+# Special case object file targets

+#

+$(TMPDIR)\tclWinInit.obj: $(WINDIR)\tclWinInit.c

+	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

+

+$(TMPDIR)\testMain.obj: $(WINDIR)\tclAppInit.c

+	$(cc32) $(TCL_CFLAGS) -DTCL_TEST -o$(TMPDIR)\testMain.obj $?

+

+$(TMPDIR)\tclTest.obj: $(GENERICDIR)\tclTest.c

+	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

+

+$(TMPDIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c

+	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

+

+$(TMPDIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c

+	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

+

+$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c

+	$(cc32) $(TCL_CFLAGS) \

+		-DCFG_INSTALL_EXEC_PREFIX=\"$(INSTALL_EXEC_PREFIX)\"	\

+		-DCFG_INSTALL_PREFIX=\"$(INSTALL_PREFIX)\"		\

+		-DCFG_RUNTIME_EXEC_PREFIX=\"$(RUNTIME_EXEC_PREFIX)\"	\

+		-DCFG_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\"		\

+	 -o$(TMPDIR)\$@ $?

+

+$(TMPDIR)\tclAppInit.obj : $(WINDIR)\tclAppInit.c

+	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

+

+# The following objects should be built using the stub interfaces

+

+# tclWinReg: Produces errors in ANSI mode

+$(TMPDIR)\tclWinReg.obj : $(WINDIR)\tclWinReg.c

+	$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?

+

+# tclWinDde: Produces errors in ANSI mode

+$(TMPDIR)\tclWinDde.obj : $(WINDIR)\tclWinDde.c

+	$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?

+

+

+# The following objects are part of the stub library and should not

+# be built as DLL objects but none of the symbols should be exported

+

+$(TMPDIR)\tclStubLib.obj : $(GENERICDIR)\tclStubLib.c

+	$(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?

+

+

+# Dedependency rules

+

+$(GENERICDIR)\regcomp.c: \

+	$(GENERICDIR)\regguts.h \

+	$(GENERICDIR)\regc_lex.c \

+	$(GENERICDIR)\regc_color.c \

+	$(GENERICDIR)\regc_nfa.c \

+	$(GENERICDIR)\regc_cvec.c \

+	$(GENERICDIR)\regc_locale.c

+

+$(GENERICDIR)\regcustom.h: \

+	$(GENERICDIR)\tclInt.h \

+	$(GENERICDIR)\tclPort.h \

+	$(GENERICDIR)\regex.h

+

+$(GENERICDIR)\regexec.c: \

+	$(GENERICDIR)\rege_dfa.c \

+	$(GENERICDIR)\regguts.h

+

+$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h

+$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h

+$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h

+$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h

+

+#

+# Implicit rules

+#

+

+{$(WINDIR)}.c{$(TMPDIR)}.obj:

+	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<

+

+{$(GENERICDIR)}.c{$(TMPDIR)}.obj:

+	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<

+

+{$(ROOT)\compat}.c{$(TMPDIR)}.obj:

+	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<

+

+{$(WINDIR)}.rc{$(TMPDIR)}.res:

+	$(rc32) $(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<

+

+clean:

+	-@$(RM) $(OUTDIR)\*.exp

+	-@$(RM) $(OUTDIR)\*.lib

+	-@$(RM) $(OUTDIR)\*.dll

+	-@$(RM) $(OUTDIR)\*.exe

+	-@$(RM) $(OUTDIR)\*.pdb

+	-@$(RM) $(TMPDIR)\*.pch

+	-@$(RM) $(TMPDIR)\*.obj

+	-@$(RM) $(TMPDIR)\*.res

+	-@$(RM) $(TMPDIR)\*.exe

+	-@$(RMDIR) $(OUTDIR)

+	-@$(RMDIR) $(TMPDIR)