summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--tests/link.test2
-rw-r--r--win/tclWinConsole.c223
-rw-r--r--win/tclWinInit.c20
-rw-r--r--win/tclWinInt.h75
-rw-r--r--win/tclWinPipe.c621
-rw-r--r--win/tclWinSerial.c93
6 files changed, 643 insertions, 391 deletions
diff --git a/tests/link.test b/tests/link.test
index dda7d6b..6bff356 100644
--- a/tests/link.test
+++ b/tests/link.test
@@ -152,7 +152,7 @@ test link-2.8 {writing C variables from Tcl} -constraints {testlink} -setup {
set uwide "0O"
concat [testlink get] | $int $real $bool $string $wide $char $uchar $short $ushort $uint $long $ulong $float $uwide
} -result {0 0.0 0 0 0 0 0 0 0 0 0 0 0.0 0 | 0x 0b 0 0 0O 0X 0B 0O 0x 0b 0o 0X 0B 0O}
-test link-2.8 {writing C variables from Tcl} -constraints {testlink} -setup {
+test link-2.9 {writing C variables from Tcl} -constraints {testlink} -setup {
testlink delete
} -body {
testlink set 43 1.21 4 - 56785678 64 250 30000 60000 0xbaadbeef 12321 32123 3.25 1231231234
diff --git a/win/tclWinConsole.c b/win/tclWinConsole.c
index 71facef..d61a030 100644
--- a/win/tclWinConsole.c
+++ b/win/tclWinConsole.c
@@ -54,11 +54,7 @@ typedef struct ConsoleThreadInfo {
HANDLE readyEvent; /* Manual-reset event to signal _to_ the main
* thread when the worker thread has finished
* waiting for its normal work to happen. */
- HANDLE startEvent; /* Auto-reset event used by the main thread to
- * signal when the thread should attempt to do
- * its normal work. */
- HANDLE stopEvent; /* Auto-reset event used by the main thread to
- * signal when the thread should exit. */
+ TclPipeThreadInfo *TI; /* Thread info structure of writer and reader. */
} ConsoleThreadInfo;
/*
@@ -82,16 +78,14 @@ typedef struct ConsoleInfo {
* threads. */
ConsoleThreadInfo writer; /* A specialized thread for handling
* asynchronous writes to the console; the
- * waiting starts when a start event is sent,
+ * waiting starts when a control event is sent,
* and a reset event is sent back to the main
- * thread when the write is done. A stop event
- * is used to terminate the thread. */
+ * thread when the write is done. */
ConsoleThreadInfo reader; /* A specialized thread for handling
* asynchronous reads from the console; the
- * waiting starts when a start event is sent,
+ * waiting starts when a control event is sent,
* and a reset event is sent back to the main
- * thread when input is available. A stop
- * event is used to terminate the thread. */
+ * thread when input is available. */
DWORD writeError; /* An error caused by the last background
* write. Set to 0 if no error has been
* detected. This word is shared with the
@@ -168,10 +162,6 @@ static BOOL ReadConsoleBytes(HANDLE hConsole, LPVOID lpBuffer,
static BOOL WriteConsoleBytes(HANDLE hConsole,
const void *lpBuffer, DWORD nbytes,
LPDWORD nbyteswritten);
-static void StartChannelThread(ConsoleInfo *infoPtr,
- ConsoleThreadInfo *threadInfoPtr,
- LPTHREAD_START_ROUTINE threadProc);
-static void StopChannelThread(ConsoleThreadInfo *threadInfoPtr);
/*
* This structure describes the channel type structure for command console
@@ -518,84 +508,6 @@ ConsoleBlockModeProc(
/*
*----------------------------------------------------------------------
*
- * StartChannelThread, StopChannelThread --
- *
- * Helpers that codify how to ask one of the console service threads to
- * start and stop.
- *
- *----------------------------------------------------------------------
- */
-
-static void
-StartChannelThread(
- ConsoleInfo *infoPtr,
- ConsoleThreadInfo *threadInfoPtr,
- LPTHREAD_START_ROUTINE threadProc)
-{
- DWORD id;
-
- threadInfoPtr->readyEvent = CreateEvent(NULL, TRUE, TRUE, NULL);
- threadInfoPtr->startEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
- threadInfoPtr->stopEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
- threadInfoPtr->thread = CreateThread(NULL, 256, threadProc, infoPtr, 0,
- &id);
- SetThreadPriority(threadInfoPtr->thread, THREAD_PRIORITY_HIGHEST);
-}
-
-static void
-StopChannelThread(
- ConsoleThreadInfo *threadInfoPtr)
-{
- DWORD exitCode = 0;
-
- /*
- * The thread may already have closed on it's own. Check it's exit
- * code.
- */
-
- GetExitCodeThread(threadInfoPtr->thread, &exitCode);
- if (exitCode == STILL_ACTIVE) {
- /*
- * Set the stop event so that if the reader thread is blocked in
- * ConsoleReaderThread on WaitForMultipleEvents, it will exit cleanly.
- */
-
- SetEvent(threadInfoPtr->stopEvent);
-
- /*
- * Wait at most 20 milliseconds for the reader thread to close.
- */
-
- if (WaitForSingleObject(threadInfoPtr->thread, 20) == WAIT_TIMEOUT) {
- /*
- * Forcibly terminate the background thread as a last resort.
- * Note that we need to guard against terminating the thread while
- * it is in the middle of Tcl_ThreadAlert because it won't be able
- * to release the notifier lock.
- */
-
- Tcl_MutexLock(&consoleMutex);
- /* BUG: this leaks memory. */
- TerminateThread(threadInfoPtr->thread, 0);
- Tcl_MutexUnlock(&consoleMutex);
- }
- }
-
- /*
- * Close all the handles associated with the thread, and set the thread
- * handle field to NULL to mark that the thread has been cleaned up.
- */
-
- CloseHandle(threadInfoPtr->thread);
- CloseHandle(threadInfoPtr->readyEvent);
- CloseHandle(threadInfoPtr->startEvent);
- CloseHandle(threadInfoPtr->stopEvent);
- threadInfoPtr->thread = NULL;
-}
-
-/*
- *----------------------------------------------------------------------
- *
* ConsoleCloseProc --
*
* Closes a console based IO channel.
@@ -626,7 +538,10 @@ ConsoleCloseProc(
*/
if (consolePtr->reader.thread) {
- StopChannelThread(&consolePtr->reader);
+ TclPipeThreadStop(&consolePtr->reader.TI, consolePtr->reader.thread);
+ CloseHandle(consolePtr->reader.thread);
+ CloseHandle(consolePtr->reader.readyEvent);
+ consolePtr->reader.thread = NULL;
}
consolePtr->validMask &= ~TCL_READABLE;
@@ -643,10 +558,13 @@ ConsoleCloseProc(
* prevent infinite wait on exit. [Python Bug 216289]
*/
- WaitForSingleObject(consolePtr->writer.readyEvent, INFINITE);
+ WaitForSingleObject(consolePtr->writer.readyEvent, 5000);
}
- StopChannelThread(&consolePtr->writer);
+ TclPipeThreadStop(&consolePtr->writer.TI, consolePtr->writer.thread);
+ CloseHandle(consolePtr->writer.thread);
+ CloseHandle(consolePtr->writer.readyEvent);
+ consolePtr->writer.thread = NULL;
}
consolePtr->validMask &= ~TCL_WRITABLE;
@@ -812,8 +730,11 @@ ConsoleOutputProc(
DWORD bytesWritten, timeout;
*errorCode = 0;
- timeout = (infoPtr->flags & CONSOLE_ASYNC) ? 0 : INFINITE;
- if (WaitForSingleObject(threadInfo->readyEvent,timeout) == WAIT_TIMEOUT) {
+
+ /* avoid blocking if pipe-thread exited */
+ timeout = (infoPtr->flags & CONSOLE_ASYNC) || !TclPipeThreadIsAlive(&threadInfo->TI)
+ || TclInExit() || TclInThreadExit() ? 0 : INFINITE;
+ if (WaitForSingleObject(threadInfo->readyEvent, timeout) == WAIT_TIMEOUT) {
/*
* The writer thread is blocked waiting for a write to complete and
* the channel is in non-blocking mode.
@@ -853,7 +774,7 @@ ConsoleOutputProc(
memcpy(infoPtr->writeBuf, buf, (size_t) toWrite);
infoPtr->toWrite = toWrite;
ResetEvent(threadInfo->readyEvent);
- SetEvent(threadInfo->startEvent);
+ TclPipeThreadSignal(&threadInfo->TI);
bytesWritten = toWrite;
} else {
/*
@@ -1090,9 +1011,10 @@ WaitForRead(
* Synchronize with the reader thread.
*/
- timeout = blocking ? INFINITE : 0;
- if (WaitForSingleObject(threadInfo->readyEvent,
- timeout) == WAIT_TIMEOUT) {
+ /* avoid blocking if pipe-thread exited */
+ timeout = (!blocking || !TclPipeThreadIsAlive(&threadInfo->TI)
+ || TclInExit() || TclInThreadExit()) ? 0 : INFINITE;
+ if (WaitForSingleObject(threadInfo->readyEvent, timeout) == WAIT_TIMEOUT) {
/*
* The reader thread is blocked waiting for data and the channel
* is in non-blocking mode.
@@ -1152,7 +1074,7 @@ WaitForRead(
*/
ResetEvent(threadInfo->readyEvent);
- SetEvent(threadInfo->startEvent);
+ TclPipeThreadSignal(&threadInfo->TI);
}
}
@@ -1179,34 +1101,27 @@ static DWORD WINAPI
ConsoleReaderThread(
LPVOID arg)
{
- ConsoleInfo *infoPtr = arg;
- HANDLE *handle = infoPtr->handle;
- ConsoleThreadInfo *threadInfo = &infoPtr->reader;
- DWORD waitResult;
- HANDLE wEvents[2];
-
- /*
- * The first event takes precedence.
- */
-
- wEvents[0] = threadInfo->stopEvent;
- wEvents[1] = threadInfo->startEvent;
+ TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg;
+ ConsoleInfo *infoPtr = NULL; /* access info only after success init/wait */
+ HANDLE *handle = NULL;
+ ConsoleThreadInfo *threadInfo = NULL;
+ int done = 0;
- for (;;) {
+ while (!done) {
/*
- * Wait for the main thread to signal before attempting to wait.
+ * Wait for the main thread to signal before attempting to read.
*/
- waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE);
-
- if (waitResult != (WAIT_OBJECT_0 + 1)) {
- /*
- * The start event was not signaled. It must be the stop event or
- * an error, so exit this thread.
- */
-
+ if (!TclPipeThreadWaitForSignal(&pipeTI)) {
+ /* exit */
break;
}
+ if (!infoPtr) {
+ infoPtr = (ConsoleInfo *)pipeTI->clientData;
+ handle = infoPtr->handle;
+ threadInfo = &infoPtr->reader;
+ }
+
/*
* Look for data on the console, but first ignore any events that are
@@ -1226,6 +1141,7 @@ ConsoleReaderThread(
if (err == (DWORD) EOF) {
infoPtr->readFlags = CONSOLE_EOF;
}
+ done = 1;
}
/*
@@ -1253,6 +1169,9 @@ ConsoleReaderThread(
Tcl_MutexUnlock(&consoleMutex);
}
+ /* Worker exit, so inform the main thread or free TI-structure (if owned) */
+ TclPipeThreadExit(&pipeTI);
+
return 0;
}
@@ -1279,35 +1198,27 @@ static DWORD WINAPI
ConsoleWriterThread(
LPVOID arg)
{
- ConsoleInfo *infoPtr = arg;
- HANDLE *handle = infoPtr->handle;
- ConsoleThreadInfo *threadInfo = &infoPtr->writer;
- DWORD count, toWrite, waitResult;
+ TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg;
+ ConsoleInfo *infoPtr = NULL; /* access info only after success init/wait */
+ HANDLE *handle = NULL;
+ ConsoleThreadInfo *threadInfo = NULL;
+ DWORD count, toWrite;
char *buf;
- HANDLE wEvents[2];
-
- /*
- * The first event takes precedence.
- */
+ int done = 0;
- wEvents[0] = threadInfo->stopEvent;
- wEvents[1] = threadInfo->startEvent;
-
- for (;;) {
+ while (!done) {
/*
* Wait for the main thread to signal before attempting to write.
*/
-
- waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE);
-
- if (waitResult != (WAIT_OBJECT_0 + 1)) {
- /*
- * The start event was not signaled. It must be the stop event or
- * an error, so exit this thread.
- */
-
+ if (!TclPipeThreadWaitForSignal(&pipeTI)) {
+ /* exit */
break;
}
+ if (!infoPtr) {
+ infoPtr = (ConsoleInfo *)pipeTI->clientData;
+ handle = infoPtr->handle;
+ threadInfo = &infoPtr->writer;
+ }
buf = infoPtr->writeBuf;
toWrite = infoPtr->toWrite;
@@ -1320,6 +1231,7 @@ ConsoleWriterThread(
if (WriteConsoleBytes(handle, buf, (DWORD) toWrite,
&count) == FALSE) {
infoPtr->writeError = GetLastError();
+ done = 1;
break;
}
toWrite -= count;
@@ -1351,6 +1263,9 @@ ConsoleWriterThread(
Tcl_MutexUnlock(&consoleMutex);
}
+ /* Worker exit, so inform the main thread or free TI-structure (if owned) */
+ TclPipeThreadExit(&pipeTI);
+
return 0;
}
@@ -1421,11 +1336,21 @@ TclWinOpenConsoleChannel(
modes &= ~(ENABLE_WINDOW_INPUT | ENABLE_MOUSE_INPUT);
modes |= ENABLE_LINE_INPUT;
SetConsoleMode(infoPtr->handle, modes);
- StartChannelThread(infoPtr, &infoPtr->reader, ConsoleReaderThread);
+
+ infoPtr->reader.readyEvent = CreateEvent(NULL, TRUE, TRUE, NULL);
+ infoPtr->reader.thread = CreateThread(NULL, 256, ConsoleReaderThread,
+ TclPipeThreadCreateTI(&infoPtr->reader.TI, infoPtr,
+ infoPtr->reader.readyEvent), 0, NULL);
+ SetThreadPriority(infoPtr->reader.thread, THREAD_PRIORITY_HIGHEST);
}
if (permissions & TCL_WRITABLE) {
- StartChannelThread(infoPtr, &infoPtr->writer, ConsoleWriterThread);
+
+ infoPtr->writer.readyEvent = CreateEvent(NULL, TRUE, TRUE, NULL);
+ infoPtr->writer.thread = CreateThread(NULL, 256, ConsoleWriterThread,
+ TclPipeThreadCreateTI(&infoPtr->writer.TI, infoPtr,
+ infoPtr->writer.readyEvent), 0, NULL);
+ SetThreadPriority(infoPtr->writer.thread, THREAD_PRIORITY_HIGHEST);
}
/*
diff --git a/win/tclWinInit.c b/win/tclWinInit.c
index 8b600f6..f13e314 100644
--- a/win/tclWinInit.c
+++ b/win/tclWinInit.c
@@ -76,6 +76,15 @@ typedef struct {
#define PROCESSOR_ARCHITECTURE_UNKNOWN 0xFFFF
#endif
+
+/*
+ * Windows version dependend functions
+ */
+static TclWinProcs _tclWinProcs = {
+ NULL
+};
+TclWinProcs *tclWinProcs = &_tclWinProcs;
+
/*
* The following arrays contain the human readable strings for the Windows
* platform and processor values.
@@ -132,6 +141,7 @@ TclpInitPlatform(void)
{
WSADATA wsaData;
WORD wVersionRequested = MAKEWORD(2, 2);
+ HINSTANCE hInstance;
tclPlatform = TCL_PLATFORM_WINDOWS;
@@ -150,6 +160,16 @@ TclpInitPlatform(void)
TclWinInit(GetModuleHandle(NULL));
#endif
+
+ /*
+ * Fill available functions depending on windows version
+ */
+ hInstance = LoadLibraryW(L"kernel32");
+ if (hInstance != NULL) {
+ _tclWinProcs.cancelSynchronousIo =
+ (BOOL (WINAPI *)(HANDLE)) GetProcAddress(hInstance,
+ "CancelSynchronousIo");
+ }
}
/*
diff --git a/win/tclWinInt.h b/win/tclWinInt.h
index 6b098f8..76f5f68 100644
--- a/win/tclWinInt.h
+++ b/win/tclWinInt.h
@@ -32,6 +32,15 @@ typedef struct TCLEXCEPTION_REGISTRATION {
#endif
/*
+ * Windows version dependend functions
+ */
+typedef struct TclWinProcs {
+ BOOL (WINAPI *cancelSynchronousIo)(HANDLE);
+} TclWinProcs;
+
+MODULE_SCOPE TclWinProcs *tclWinProcs;
+
+/*
* Some versions of Borland C have a define for the OSVERSIONINFO for
* Win32s and for NT, but not for Windows 95.
* Define VER_PLATFORM_WIN32_CE for those without newer headers.
@@ -86,4 +95,70 @@ MODULE_SCOPE void TclpSetAllocCache(void *);
#define FILE_ATTRIBUTE_REPARSE_POINT 0x00000400
#endif
+/*
+ *----------------------------------------------------------------------
+ * Declarations of helper-workers threaded facilities for a pipe based channel.
+ *
+ * Corresponding functionality provided in "tclWinPipe.c".
+ *----------------------------------------------------------------------
+ */
+
+typedef struct TclPipeThreadInfo {
+ HANDLE evControl; /* Auto-reset event used by the main thread to
+ * signal when the pipe thread should attempt
+ * to do read/write operation. Additionally
+ * used as signal to stop (state set to -1) */
+ volatile LONG state; /* Indicates current state of the thread */
+ ClientData clientData; /* Referenced data of the main thread */
+ HANDLE evWakeUp; /* Optional wake-up event worker set by shutdown */
+} TclPipeThreadInfo;
+
+
+/* If pipe-workers will use some tcl subsystem, we can use ckalloc without
+ * more overhead for finalize thread (should be executed anyway)
+ *
+ * #define _PTI_USE_CKALLOC 1
+ */
+
+/*
+ * State of the pipe-worker.
+ *
+ * State PTI_STATE_STOP possible from idle state only, worker owns TI structure.
+ * Otherwise PTI_STATE_END used (main thread hold ownership of the TI).
+ */
+
+#define PTI_STATE_IDLE 0 /* idle or not yet initialzed */
+#define PTI_STATE_WORK 1 /* in work */
+#define PTI_STATE_STOP 2 /* thread should stop work (owns TI structure) */
+#define PTI_STATE_END 4 /* thread should stop work (worker is busy) */
+#define PTI_STATE_DOWN 8 /* worker is down */
+
+
+MODULE_SCOPE
+TclPipeThreadInfo * TclPipeThreadCreateTI(TclPipeThreadInfo **pipeTIPtr,
+ ClientData clientData, HANDLE wakeEvent);
+MODULE_SCOPE int TclPipeThreadWaitForSignal(TclPipeThreadInfo **pipeTIPtr);
+
+static inline void
+TclPipeThreadSignal(
+ TclPipeThreadInfo **pipeTIPtr)
+{
+ TclPipeThreadInfo *pipeTI = *pipeTIPtr;
+ if (pipeTI) {
+ SetEvent(pipeTI->evControl);
+ }
+};
+
+static inline int
+TclPipeThreadIsAlive(
+ TclPipeThreadInfo **pipeTIPtr)
+{
+ TclPipeThreadInfo *pipeTI = *pipeTIPtr;
+ return (pipeTI && pipeTI->state != PTI_STATE_DOWN);
+};
+
+MODULE_SCOPE int TclPipeThreadStopSignal(TclPipeThreadInfo **pipeTIPtr, HANDLE wakeEvent);
+MODULE_SCOPE void TclPipeThreadStop(TclPipeThreadInfo **pipeTIPtr, HANDLE hThread);
+MODULE_SCOPE void TclPipeThreadExit(TclPipeThreadInfo **pipeTIPtr);
+
#endif /* _TCLWININT */
diff --git a/win/tclWinPipe.c b/win/tclWinPipe.c
index 4775418..4a1e75a 100644
--- a/win/tclWinPipe.c
+++ b/win/tclWinPipe.c
@@ -109,24 +109,17 @@ typedef struct PipeInfo {
Tcl_ThreadId threadId; /* Thread to which events should be reported.
* This value is used by the reader/writer
* threads. */
+ TclPipeThreadInfo *writeTI; /* Thread info of writer and reader, this */
+ TclPipeThreadInfo *readTI; /* structure owned by corresponding thread. */
HANDLE writeThread; /* Handle to writer thread. */
HANDLE readThread; /* Handle to reader thread. */
+
HANDLE writable; /* Manual-reset event to signal when the
* writer thread has finished waiting for the
* current buffer to be written. */
HANDLE readable; /* Manual-reset event to signal when the
* reader thread has finished waiting for
* input. */
- HANDLE startWriter; /* Auto-reset event used by the main thread to
- * signal when the writer thread should
- * attempt to write to the pipe. */
- HANDLE stopWriter; /* Manual-reset event used to alert the reader
- * thread to fall-out and exit */
- HANDLE startReader; /* Auto-reset event used by the main thread to
- * signal when the reader thread should
- * attempt to read from the pipe. */
- HANDLE stopReader; /* Manual-reset event used to alert the reader
- * thread to fall-out and exit */
DWORD writeError; /* An error caused by the last background
* write. Set to 0 if no error has been
* detected. This word is shared with the
@@ -1571,7 +1564,6 @@ TclpCreateCommandChannel(
Tcl_Pid *pidPtr) /* An array of process identifiers. */
{
char channelName[16 + TCL_INTEGER_SPACE];
- DWORD id;
PipeInfo *infoPtr = ckalloc(sizeof(PipeInfo));
PipeInit();
@@ -1599,13 +1591,13 @@ TclpCreateCommandChannel(
*/
infoPtr->readable = CreateEvent(NULL, TRUE, TRUE, NULL);
- infoPtr->startReader = CreateEvent(NULL, FALSE, FALSE, NULL);
- infoPtr->stopReader = CreateEvent(NULL, TRUE, FALSE, NULL);
infoPtr->readThread = CreateThread(NULL, 256, PipeReaderThread,
- infoPtr, 0, &id);
+ TclPipeThreadCreateTI(&infoPtr->readTI, infoPtr, infoPtr->readable),
+ 0, NULL);
SetThreadPriority(infoPtr->readThread, THREAD_PRIORITY_HIGHEST);
infoPtr->validMask |= TCL_READABLE;
} else {
+ infoPtr->readTI = NULL;
infoPtr->readThread = 0;
}
if (writeFile != NULL) {
@@ -1614,12 +1606,14 @@ TclpCreateCommandChannel(
*/
infoPtr->writable = CreateEvent(NULL, TRUE, TRUE, NULL);
- infoPtr->startWriter = CreateEvent(NULL, FALSE, FALSE, NULL);
- infoPtr->stopWriter = CreateEvent(NULL, TRUE, FALSE, NULL);
infoPtr->writeThread = CreateThread(NULL, 256, PipeWriterThread,
- infoPtr, 0, &id);
+ TclPipeThreadCreateTI(&infoPtr->writeTI, infoPtr, infoPtr->writable),
+ 0, NULL);
SetThreadPriority(infoPtr->writeThread, THREAD_PRIORITY_HIGHEST);
infoPtr->validMask |= TCL_WRITABLE;
+ } else {
+ infoPtr->writeTI = NULL;
+ infoPtr->writeThread = 0;
}
/*
@@ -1805,12 +1799,12 @@ PipeClose2Proc(
int errorCode, result;
PipeInfo *infoPtr, **nextPtrPtr;
ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);
- DWORD exitCode;
+ int inExit = (TclInExit() || TclInThreadExit());
errorCode = 0;
result = 0;
- if ((!flags || flags == TCL_CLOSE_READ) && (pipePtr->readFile != NULL)) {
+ if ((!flags || flags & TCL_CLOSE_READ) && (pipePtr->readFile != NULL)) {
/*
* Clean up the background thread if necessary. Note that this must be
* done before we can close the file, since the thread may be blocking
@@ -1818,55 +1812,10 @@ PipeClose2Proc(
*/
if (pipePtr->readThread) {
- /*
- * The thread may already have closed on its own. Check its exit
- * code.
- */
-
- GetExitCodeThread(pipePtr->readThread, &exitCode);
-
- if (exitCode == STILL_ACTIVE) {
- /*
- * Set the stop event so that if the reader thread is blocked
- * in PipeReaderThread on WaitForMultipleEvents, it will exit
- * cleanly.
- */
-
- SetEvent(pipePtr->stopReader);
-
- /*
- * Wait at most 20 milliseconds for the reader thread to
- * close.
- */
-
- if (WaitForSingleObject(pipePtr->readThread,
- 20) == WAIT_TIMEOUT) {
- /*
- * The thread must be blocked waiting for the pipe to
- * become readable in ReadFile(). There isn't a clean way
- * to exit the thread from this condition. We should
- * terminate the child process instead to get the reader
- * thread to fall out of ReadFile with a FALSE. (below) is
- * not the correct way to do this, but will stay here
- * until a better solution is found.
- *
- * Note that we need to guard against terminating the
- * thread while it is in the middle of Tcl_ThreadAlert
- * because it won't be able to release the notifier lock.
- */
-
- Tcl_MutexLock(&pipeMutex);
-
- /* BUG: this leaks memory */
- TerminateThread(pipePtr->readThread, 0);
- Tcl_MutexUnlock(&pipeMutex);
- }
- }
+ TclPipeThreadStop(&pipePtr->readTI, pipePtr->readThread);
CloseHandle(pipePtr->readThread);
CloseHandle(pipePtr->readable);
- CloseHandle(pipePtr->startReader);
- CloseHandle(pipePtr->stopReader);
pipePtr->readThread = NULL;
}
if (TclpCloseFile(pipePtr->readFile) != 0) {
@@ -1875,80 +1824,34 @@ PipeClose2Proc(
pipePtr->validMask &= ~TCL_READABLE;
pipePtr->readFile = NULL;
}
- if ((!flags || flags & TCL_CLOSE_WRITE)
- && (pipePtr->writeFile != NULL)) {
+ if ((!flags || flags & TCL_CLOSE_WRITE) && (pipePtr->writeFile != NULL)) {
if (pipePtr->writeThread) {
+
/*
* Wait for the writer thread to finish the current buffer, then
* terminate the thread and close the handles. If the channel is
- * nonblocking but blocked during exit, bail out since the worker
+ * nonblocking or may block during exit, bail out since the worker
* thread is not interruptible and we want TIP#398-fast-exit.
*/
- if (TclInExit()
- && (pipePtr->flags & PIPE_ASYNC)) {
+ if ((pipePtr->flags & PIPE_ASYNC) && inExit) {
/* give it a chance to leave honorably */
- SetEvent(pipePtr->stopWriter);
+ TclPipeThreadStopSignal(&pipePtr->writeTI, pipePtr->writable);
- if (WaitForSingleObject(pipePtr->writable, 0) == WAIT_TIMEOUT) {
+ if (WaitForSingleObject(pipePtr->writable, 20) == WAIT_TIMEOUT) {
return EWOULDBLOCK;
}
} else {
- WaitForSingleObject(pipePtr->writable, INFINITE);
+ WaitForSingleObject(pipePtr->writable, inExit ? 5000 : INFINITE);
}
- /*
- * The thread may already have closed on it's own. Check its exit
- * code.
- */
-
- GetExitCodeThread(pipePtr->writeThread, &exitCode);
+ TclPipeThreadStop(&pipePtr->writeTI, pipePtr->writeThread);
- if (exitCode == STILL_ACTIVE) {
- /*
- * Set the stop event so that if the reader thread is blocked
- * in PipeReaderThread on WaitForMultipleEvents, it will exit
- * cleanly.
- */
-
- SetEvent(pipePtr->stopWriter);
-
- /*
- * Wait at most 20 milliseconds for the reader thread to
- * close.
- */
-
- if (WaitForSingleObject(pipePtr->writeThread,
- 20) == WAIT_TIMEOUT) {
- /*
- * The thread must be blocked waiting for the pipe to
- * consume input in WriteFile(). There isn't a clean way
- * to exit the thread from this condition. We should
- * terminate the child process instead to get the writer
- * thread to fall out of WriteFile with a FALSE. (below)
- * is not the correct way to do this, but will stay here
- * until a better solution is found.
- *
- * Note that we need to guard against terminating the
- * thread while it is in the middle of Tcl_ThreadAlert
- * because it won't be able to release the notifier lock.
- */
-
- Tcl_MutexLock(&pipeMutex);
-
- /* BUG: this leaks memory */
- TerminateThread(pipePtr->writeThread, 0);
- Tcl_MutexUnlock(&pipeMutex);
- }
- }
-
- CloseHandle(pipePtr->writeThread);
CloseHandle(pipePtr->writable);
- CloseHandle(pipePtr->startWriter);
- CloseHandle(pipePtr->stopWriter);
+ CloseHandle(pipePtr->writeThread);
pipePtr->writeThread = NULL;
}
if (TclpCloseFile(pipePtr->writeFile) != 0) {
@@ -1983,7 +1886,7 @@ PipeClose2Proc(
}
}
- if ((pipePtr->flags & PIPE_ASYNC) || TclInExit()) {
+ if ((pipePtr->flags & PIPE_ASYNC) || inExit) {
/*
* If the channel is non-blocking or Tcl is being cleaned up, just
* detach the children PIDs, reap them (important if we are in a
@@ -2161,7 +2064,10 @@ PipeOutputProc(
DWORD bytesWritten, timeout;
*errorCode = 0;
- timeout = (infoPtr->flags & PIPE_ASYNC) ? 0 : INFINITE;
+
+ /* avoid blocking if pipe-thread exited */
+ timeout = ((infoPtr->flags & PIPE_ASYNC) || !TclPipeThreadIsAlive(&infoPtr->writeTI)
+ || TclInExit() || TclInThreadExit()) ? 0 : INFINITE;
if (WaitForSingleObject(infoPtr->writable, timeout) == WAIT_TIMEOUT) {
/*
* The writer thread is blocked waiting for a write to complete and
@@ -2202,7 +2108,7 @@ PipeOutputProc(
memcpy(infoPtr->writeBuf, buf, (size_t) toWrite);
infoPtr->toWrite = toWrite;
ResetEvent(infoPtr->writable);
- SetEvent(infoPtr->startWriter);
+ TclPipeThreadSignal(&infoPtr->writeTI);
bytesWritten = toWrite;
} else {
/*
@@ -2712,7 +2618,9 @@ WaitForRead(
* Synchronize with the reader thread.
*/
- timeout = blocking ? INFINITE : 0;
+ /* avoid blocking if pipe-thread exited */
+ timeout = (!blocking || !TclPipeThreadIsAlive(&infoPtr->readTI)
+ || TclInExit() || TclInThreadExit()) ? 0 : INFINITE;
if (WaitForSingleObject(infoPtr->readable, timeout) == WAIT_TIMEOUT) {
/*
* The reader thread is blocked waiting for data and the channel
@@ -2786,7 +2694,7 @@ WaitForRead(
*/
ResetEvent(infoPtr->readable);
- SetEvent(infoPtr->startReader);
+ TclPipeThreadSignal(&infoPtr->readTI);
}
}
@@ -2814,33 +2722,27 @@ static DWORD WINAPI
PipeReaderThread(
LPVOID arg)
{
- PipeInfo *infoPtr = (PipeInfo *)arg;
- HANDLE *handle = ((WinFile *) infoPtr->readFile)->handle;
+ TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg;
+ PipeInfo *infoPtr = NULL; /* access info only after success init/wait */
+ HANDLE handle = NULL;
DWORD count, err;
int done = 0;
- HANDLE wEvents[2];
- DWORD waitResult;
-
- wEvents[0] = infoPtr->stopReader;
- wEvents[1] = infoPtr->startReader;
while (!done) {
/*
* Wait for the main thread to signal before attempting to wait on the
* pipe becoming readable.
*/
-
- waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE);
-
- if (waitResult != (WAIT_OBJECT_0 + 1)) {
- /*
- * The start event was not signaled. It might be the stop event or
- * an error, so exit.
- */
-
+ if (!TclPipeThreadWaitForSignal(&pipeTI)) {
+ /* exit */
break;
}
+ if (!infoPtr) {
+ infoPtr = (PipeInfo *)pipeTI->clientData;
+ handle = ((WinFile *) infoPtr->readFile)->handle;
+ }
+
/*
* Try waiting for 0 bytes. This will block until some data is
* available on NT, but will return immediately on Win 95. So, if no
@@ -2860,7 +2762,7 @@ PipeReaderThread(
infoPtr->readFlags |= PIPE_EOF;
done = 1;
} else if (err == ERROR_INVALID_HANDLE) {
- break;
+ done = 1;
}
} else if (count == 0) {
if (ReadFile(handle, &(infoPtr->extraByte), 1, &count, NULL)
@@ -2882,12 +2784,11 @@ PipeReaderThread(
infoPtr->readFlags |= PIPE_EOF;
done = 1;
} else if (err == ERROR_INVALID_HANDLE) {
- break;
+ done = 1;
}
}
}
-
/*
* Signal the main thread by signalling the readable event and then
* waking up the notifier thread.
@@ -2913,6 +2814,12 @@ PipeReaderThread(
Tcl_MutexUnlock(&pipeMutex);
}
+ /*
+ * If state of thread was set to stop, we can sane free info structure,
+ * otherwise it is shared with main thread, so main thread will own it
+ */
+ TclPipeThreadExit(&pipeTI);
+
return 0;
}
@@ -2937,37 +2844,27 @@ static DWORD WINAPI
PipeWriterThread(
LPVOID arg)
{
- PipeInfo *infoPtr = (PipeInfo *)arg;
- HANDLE *handle = ((WinFile *) infoPtr->writeFile)->handle;
+ TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg;
+ PipeInfo *infoPtr = NULL; /* access info only after success init/wait */
+ HANDLE handle = NULL;
DWORD count, toWrite;
char *buf;
int done = 0;
- HANDLE wEvents[2];
- DWORD waitResult;
-
- wEvents[0] = infoPtr->stopWriter;
- wEvents[1] = infoPtr->startWriter;
while (!done) {
/*
* Wait for the main thread to signal before attempting to write.
*/
-
- waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE);
-
- if (waitResult != (WAIT_OBJECT_0 + 1)) {
- /*
- * The start event was not signaled. It might be the stop event or
- * an error, so exit.
- */
-
- if (waitResult == WAIT_OBJECT_0) {
- SetEvent(infoPtr->writable);
- }
-
+ if (!TclPipeThreadWaitForSignal(&pipeTI)) {
+ /* exit */
break;
}
+ if (!infoPtr) {
+ infoPtr = (PipeInfo *)pipeTI->clientData;
+ handle = ((WinFile *) infoPtr->writeFile)->handle;
+ }
+
buf = infoPtr->writeBuf;
toWrite = infoPtr->toWrite;
@@ -3011,6 +2908,12 @@ PipeWriterThread(
Tcl_MutexUnlock(&pipeMutex);
}
+ /*
+ * If state of thread was set to stop, we can sane free info structure,
+ * otherwise it is shared with main thread, so main thread will own it.
+ */
+ TclPipeThreadExit(&pipeTI);
+
return 0;
}
@@ -3159,6 +3062,396 @@ TclpOpenTemporaryFile(
}
/*
+ *----------------------------------------------------------------------
+ *
+ * TclPipeThreadCreateTI --
+ *
+ * Creates a thread info structure, can be owned by worker.
+ *
+ * Results:
+ * Pointer to created TI structure.
+ *
+ *----------------------------------------------------------------------
+ */
+
+TclPipeThreadInfo *
+TclPipeThreadCreateTI(
+ TclPipeThreadInfo **pipeTIPtr,
+ ClientData clientData,
+ HANDLE wakeEvent)
+{
+ TclPipeThreadInfo *pipeTI;
+#ifndef _PTI_USE_CKALLOC
+ pipeTI = malloc(sizeof(TclPipeThreadInfo));
+#else
+ pipeTI = ckalloc(sizeof(TclPipeThreadInfo));
+#endif
+ pipeTI->evControl = CreateEvent(NULL, FALSE, FALSE, NULL);
+ pipeTI->state = PTI_STATE_IDLE;
+ pipeTI->clientData = clientData;
+ pipeTI->evWakeUp = wakeEvent;
+ return (*pipeTIPtr = pipeTI);
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * TclPipeThreadWaitForSignal --
+ *
+ * Wait for work/stop signals inside pipe worker.
+ *
+ * Results:
+ * 1 if signaled to work, 0 if signaled to stop.
+ *
+ * Side effects:
+ * If this function returns 0, TI-structure pointer given via pipeTIPtr
+ * may be NULL, so not accessible (can be owned by main thread).
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+TclPipeThreadWaitForSignal(
+ TclPipeThreadInfo **pipeTIPtr)
+{
+ TclPipeThreadInfo *pipeTI = *pipeTIPtr;
+ LONG state;
+ DWORD waitResult;
+ HANDLE wakeEvent;
+
+ if (!pipeTI) {
+ return 0;
+ }
+
+ wakeEvent = pipeTI->evWakeUp;
+ /*
+ * Wait for the main thread to signal before attempting to do the work.
+ */
+
+ /* reset work state of thread (idle/waiting) */
+ if ((state = InterlockedCompareExchange(&pipeTI->state,
+ PTI_STATE_IDLE, PTI_STATE_WORK)) & (PTI_STATE_STOP|PTI_STATE_END)) {
+ /* end of work, check the owner of structure */
+ goto end;
+ }
+ /* entering wait */
+ waitResult = WaitForSingleObject(pipeTI->evControl, INFINITE);
+
+ if (waitResult != WAIT_OBJECT_0) {
+
+ /*
+ * The control event was not signaled, so end of work (unexpected
+ * behaviour, main thread can be dead?).
+ */
+ goto end;
+ }
+
+ /* try to set work state of thread */
+ if ((state = InterlockedCompareExchange(&pipeTI->state,
+ PTI_STATE_WORK, PTI_STATE_IDLE)) & (PTI_STATE_STOP|PTI_STATE_END)) {
+ /* end of work */
+ goto end;
+ }
+
+ /* signaled to work */
+ return 1;
+
+end:
+ /* end of work, check the owner of the TI structure */
+ if (state != PTI_STATE_STOP) {
+ *pipeTIPtr = NULL;
+ } else {
+ pipeTI->evWakeUp = NULL;
+ }
+ if (wakeEvent) {
+ SetEvent(wakeEvent);
+ }
+ return 0;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * TclPipeThreadStopSignal --
+ *
+ * Send stop signal to the pipe worker (without waiting).
+ *
+ * After calling of this function, TI-structure pointer given via pipeTIPtr
+ * may be NULL.
+ *
+ * Results:
+ * 1 if signaled (or pipe-thread is down), 0 if pipe thread still working.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+TclPipeThreadStopSignal(
+ TclPipeThreadInfo **pipeTIPtr, HANDLE wakeEvent)
+{
+ TclPipeThreadInfo *pipeTI = *pipeTIPtr;
+ HANDLE evControl;
+ int state;
+
+ if (!pipeTI) {
+ return 1;
+ }
+ evControl = pipeTI->evControl;
+ pipeTI->evWakeUp = wakeEvent;
+ switch (
+ (state = InterlockedCompareExchange(&pipeTI->state,
+ PTI_STATE_STOP, PTI_STATE_IDLE))
+ ) {
+
+ case PTI_STATE_IDLE:
+
+ /* Thread was idle/waiting, notify it goes teardown */
+ SetEvent(evControl);
+
+ *pipeTIPtr = NULL;
+
+ case PTI_STATE_DOWN:
+
+ return 1;
+
+ default:
+ /*
+ * Thread works currently, we should try to end it, own the TI structure
+ * (because of possible sharing the joint structures with thread)
+ */
+ InterlockedExchange(&pipeTI->state, PTI_STATE_END);
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * TclPipeThreadStop --
+ *
+ * Send stop signal to the pipe worker and wait for thread completion.
+ *
+ * May be combined with TclPipeThreadStopSignal.
+ *
+ * After calling of this function, TI-structure pointer given via pipeTIPtr
+ * is not accessible (owned by pipe worker or released here).
+ *
+ * Results:
+ * None.
+ *
+ * Side effects:
+ * Can terminate pipe worker (and / or stop its synchronous operations).
+ *
+ *----------------------------------------------------------------------
+ */
+
+void
+TclPipeThreadStop(
+ TclPipeThreadInfo **pipeTIPtr,
+ HANDLE hThread)
+{
+ TclPipeThreadInfo *pipeTI = *pipeTIPtr;
+ HANDLE evControl, wakeEvent;
+ int state;
+
+ if (!pipeTI) {
+ return;
+ }
+ pipeTI = *pipeTIPtr;
+ evControl = pipeTI->evControl;
+ wakeEvent = pipeTI->evWakeUp;
+ pipeTI->evWakeUp = NULL;
+ /*
+ * Try to sane stop the pipe worker, corresponding its current state
+ */
+ switch (
+ (state = InterlockedCompareExchange(&pipeTI->state,
+ PTI_STATE_STOP, PTI_STATE_IDLE))
+ ) {
+
+ case PTI_STATE_IDLE:
+
+ /* Thread was idle/waiting, notify it goes teardown */
+ SetEvent(evControl);
+
+ /* we don't need to wait for it at all, thread frees himself (owns the TI structure) */
+ pipeTI = NULL;
+ break;
+
+ case PTI_STATE_STOP:
+ /* already stopped, thread frees himself (owns the TI structure) */
+ pipeTI = NULL;
+ break;
+ case PTI_STATE_DOWN:
+ /* Thread already down (?), do nothing */
+
+ /* we don't need to wait for it, but we should free pipeTI */
+ hThread = NULL;
+ break;
+
+ /* case PTI_STATE_WORK: */
+ default:
+ /*
+ * Thread works currently, we should try to end it, own the TI structure
+ * (because of possible sharing the joint structures with thread)
+ */
+ if ((state = InterlockedCompareExchange(&pipeTI->state,
+ PTI_STATE_END, PTI_STATE_WORK)) == PTI_STATE_DOWN
+ ) {
+ /* we don't need to wait for it, but we should free pipeTI */
+ hThread = NULL;
+ };
+ break;
+ }
+
+ if (pipeTI && hThread) {
+ DWORD exitCode;
+
+ /*
+ * The thread may already have closed on its own. Check its exit
+ * code.
+ */
+
+ GetExitCodeThread(hThread, &exitCode);
+
+ if (exitCode == STILL_ACTIVE) {
+
+ int inExit = (TclInExit() || TclInThreadExit());
+ /*
+ * Set the stop event so that if the pipe thread is blocked
+ * somewhere, it may hereafter sane exit cleanly.
+ */
+
+ SetEvent(evControl);
+
+ /*
+ * Cancel all sync-IO of this thread (may be blocked there).
+ */
+ if (tclWinProcs->cancelSynchronousIo) {
+ tclWinProcs->cancelSynchronousIo(hThread);
+ }
+
+ /*
+ * Wait at most 20 milliseconds for the reader thread to
+ * close (regarding TIP#398-fast-exit).
+ */
+
+ /* if we want TIP#398-fast-exit. */
+ if (WaitForSingleObject(hThread, inExit ? 0 : 20) == WAIT_TIMEOUT) {
+
+ /*
+ * The thread must be blocked waiting for the pipe to
+ * become readable in ReadFile(). There isn't a clean way
+ * to exit the thread from this condition. We should
+ * terminate the child process instead to get the reader
+ * thread to fall out of ReadFile with a FALSE. (below) is
+ * not the correct way to do this, but will stay here
+ * until a better solution is found.
+ *
+ * Note that we need to guard against terminating the
+ * thread while it is in the middle of Tcl_ThreadAlert
+ * because it won't be able to release the notifier lock.
+ *
+ * Also note that terminating threads during their initialization or teardown phase
+ * may result in ntdll.dll's LoaderLock to remain locked indefinitely.
+ * This causes ntdll.dll's LdrpInitializeThread() to deadlock trying to acquire LoaderLock.
+ * LdrpInitializeThread() is executed within new threads to perform
+ * initialization and to execute DllMain() of all loaded dlls.
+ * As a result, all new threads are deadlocked in their initialization phase and never execute,
+ * even though CreateThread() reports successful thread creation.
+ * This results in a very weird process-wide behavior, which is extremely hard to debug.
+ *
+ * THREADS SHOULD NEVER BE TERMINATED. Period.
+ *
+ * But for now, check if thread is exiting, and if so, let it die peacefully.
+ *
+ * Also don't terminate if in exit (otherwise deadlocked in ntdll.dll's).
+ */
+
+ if ( pipeTI->state != PTI_STATE_DOWN
+ && WaitForSingleObject(hThread,
+ inExit ? 50 : 5000) != WAIT_OBJECT_0
+ ) {
+ /* BUG: this leaks memory */
+ if (inExit || !TerminateThread(hThread, 0)) {
+ /* in exit or terminate fails, just give thread a chance to exit */
+ if (InterlockedExchange(&pipeTI->state,
+ PTI_STATE_STOP) != PTI_STATE_DOWN) {
+ pipeTI = NULL;
+ }
+ };
+ }
+ }
+ }
+ }
+
+ *pipeTIPtr = NULL;
+ if (pipeTI) {
+ if (pipeTI->evWakeUp) {
+ SetEvent(pipeTI->evWakeUp);
+ }
+ CloseHandle(pipeTI->evControl);
+ #ifndef _PTI_USE_CKALLOC
+ free(pipeTI);
+ #else
+ ckfree(pipeTI);
+ #endif
+ }
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * TclPipeThreadExit --
+ *
+ * Clean-up for the pipe thread (removes owned TI-structure in worker).
+ *
+ * Should be executed on worker exit, to inform the main thread or
+ * free TI-structure (if owned).
+ *
+ * After calling of this function, TI-structure pointer given via pipeTIPtr
+ * is not accessible (owned by main thread or released here).
+ *
+ * Results:
+ * None.
+ *
+ *----------------------------------------------------------------------
+ */
+
+void
+TclPipeThreadExit(
+ TclPipeThreadInfo **pipeTIPtr)
+{
+ LONG state;
+ TclPipeThreadInfo *pipeTI = *pipeTIPtr;
+ /*
+ * If state of thread was set to stop (exactly), we can sane free its info
+ * structure, otherwise it is shared with main thread, so main thread will
+ * own it.
+ */
+ if (!pipeTI) {
+ return;
+ }
+ *pipeTIPtr = NULL;
+ if ((state = InterlockedExchange(&pipeTI->state,
+ PTI_STATE_DOWN)) == PTI_STATE_STOP) {
+ CloseHandle(pipeTI->evControl);
+ if (pipeTI->evWakeUp) {
+ SetEvent(pipeTI->evWakeUp);
+ }
+ #ifndef _PTI_USE_CKALLOC
+ free(pipeTI);
+ #else
+ ckfree(pipeTI);
+ /* be sure all subsystems used are finalized */
+ Tcl_FinalizeThread();
+ #endif
+ }
+}
+
+/*
* Local Variables:
* mode: c
* c-basic-offset: 4
diff --git a/win/tclWinSerial.c b/win/tclWinSerial.c
index 0730a46..fe416ff 100644
--- a/win/tclWinSerial.c
+++ b/win/tclWinSerial.c
@@ -93,17 +93,12 @@ typedef struct SerialInfo {
* threads. */
OVERLAPPED osRead; /* OVERLAPPED structure for read operations. */
OVERLAPPED osWrite; /* OVERLAPPED structure for write operations */
+ TclPipeThreadInfo *writeTI; /* Thread info structure of writer worker. */
HANDLE writeThread; /* Handle to writer thread. */
CRITICAL_SECTION csWrite; /* Writer thread synchronisation. */
HANDLE evWritable; /* Manual-reset event to signal when the
* writer thread has finished waiting for the
* current buffer to be written. */
- HANDLE evStartWriter; /* Auto-reset event used by the main thread to
- * signal when the writer thread should
- * attempt to write to the serial. */
- HANDLE evStopWriter; /* Auto-reset event used by the main thread to
- * signal when the writer thread should close.
- */
DWORD writeError; /* An error caused by the last background
* write. Set to 0 if no error has been
* detected. This word is shared with the
@@ -599,7 +594,6 @@ SerialCloseProc(
int errorCode, result = 0;
SerialInfo *infoPtr, **nextPtrPtr;
ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);
- DWORD exitCode;
errorCode = 0;
@@ -609,56 +603,13 @@ SerialCloseProc(
}
serialPtr->validMask &= ~TCL_READABLE;
- if (serialPtr->validMask & TCL_WRITABLE) {
- /*
- * Generally we cannot wait for a pending write operation because it
- * may hang due to handshake
- * WaitForSingleObject(serialPtr->evWritable, INFINITE);
- */
-
- /*
- * The thread may have already closed on it's own. Check it's exit
- * code.
- */
-
- GetExitCodeThread(serialPtr->writeThread, &exitCode);
-
- if (exitCode == STILL_ACTIVE) {
- /*
- * Set the stop event so that if the writer thread is blocked in
- * SerialWriterThread on WaitForMultipleEvents, it will exit
- * cleanly.
- */
-
- SetEvent(serialPtr->evStopWriter);
-
- /*
- * Wait at most 20 milliseconds for the writer thread to close.
- */
-
- if (WaitForSingleObject(serialPtr->writeThread,
- 20) == WAIT_TIMEOUT) {
- /*
- * Forcibly terminate the background thread as a last resort.
- * Note that we need to guard against terminating the thread
- * while it is in the middle of Tcl_ThreadAlert because it
- * won't be able to release the notifier lock.
- */
+ if (serialPtr->writeThread) {
- Tcl_MutexLock(&serialMutex);
+ TclPipeThreadStop(&serialPtr->writeTI, serialPtr->writeThread);
- /* BUG: this leaks memory */
- TerminateThread(serialPtr->writeThread, 0);
-
- Tcl_MutexUnlock(&serialMutex);
- }
- }
-
- CloseHandle(serialPtr->writeThread);
CloseHandle(serialPtr->osWrite.hEvent);
CloseHandle(serialPtr->evWritable);
- CloseHandle(serialPtr->evStartWriter);
- CloseHandle(serialPtr->evStopWriter);
+ CloseHandle(serialPtr->writeThread);
serialPtr->writeThread = NULL;
PurgeComm(serialPtr->handle, PURGE_TXABORT | PURGE_TXCLEAR);
@@ -1076,7 +1027,7 @@ SerialOutputProc(
memcpy(infoPtr->writeBuf, buf, (size_t) toWrite);
infoPtr->toWrite = toWrite;
ResetEvent(infoPtr->evWritable);
- SetEvent(infoPtr->evStartWriter);
+ TclPipeThreadSignal(&infoPtr->writeTI);
bytesWritten = (DWORD) toWrite;
} else {
@@ -1313,34 +1264,21 @@ static DWORD WINAPI
SerialWriterThread(
LPVOID arg)
{
- SerialInfo *infoPtr = (SerialInfo *)arg;
- DWORD bytesWritten, toWrite, waitResult;
+ TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg;
+ SerialInfo *infoPtr = NULL; /* access info only after success init/wait */
+ DWORD bytesWritten, toWrite;
char *buf;
OVERLAPPED myWrite; /* Have an own OVERLAPPED in this thread. */
- HANDLE wEvents[2];
-
- /*
- * The stop event takes precedence by being first in the list.
- */
-
- wEvents[0] = infoPtr->evStopWriter;
- wEvents[1] = infoPtr->evStartWriter;
for (;;) {
/*
* Wait for the main thread to signal before attempting to write.
*/
-
- waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE);
-
- if (waitResult != (WAIT_OBJECT_0 + 1)) {
- /*
- * The start event was not signaled. It might be the stop event or
- * an error, so exit.
- */
-
+ if (!TclPipeThreadWaitForSignal(&pipeTI)) {
+ /* exit */
break;
}
+ infoPtr = (SerialInfo *)pipeTI->clientData;
buf = infoPtr->writeBuf;
toWrite = infoPtr->toWrite;
@@ -1404,6 +1342,9 @@ SerialWriterThread(
Tcl_MutexUnlock(&serialMutex);
}
+ /* Worker exit, so inform the main thread or free TI-structure (if owned) */
+ TclPipeThreadExit(&pipeTI);
+
return 0;
}
@@ -1477,7 +1418,6 @@ TclWinOpenSerialChannel(
int permissions)
{
SerialInfo *infoPtr;
- DWORD id;
SerialInit();
@@ -1529,10 +1469,9 @@ TclWinOpenSerialChannel(
infoPtr->osWrite.hEvent = CreateEvent(NULL, TRUE, FALSE, NULL);
infoPtr->evWritable = CreateEvent(NULL, TRUE, TRUE, NULL);
- infoPtr->evStartWriter = CreateEvent(NULL, FALSE, FALSE, NULL);
- infoPtr->evStopWriter = CreateEvent(NULL, FALSE, FALSE, NULL);
infoPtr->writeThread = CreateThread(NULL, 256, SerialWriterThread,
- infoPtr, 0, &id);
+ TclPipeThreadCreateTI(&infoPtr->writeTI, infoPtr,
+ infoPtr->evWritable), 0, NULL);
}
/*