summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--generic/tclIORTrans.c2
-rw-r--r--generic/tclZlib.c306
2 files changed, 257 insertions, 51 deletions
diff --git a/generic/tclIORTrans.c b/generic/tclIORTrans.c
index 6c9a41b..5d99f73 100644
--- a/generic/tclIORTrans.c
+++ b/generic/tclIORTrans.c
@@ -1230,7 +1230,7 @@ ReflectInput(
*
* ReflectOutput --
*
- * This function is invoked when data is writen to the channel.
+ * This function is invoked when data is written to the channel.
*
* Results:
* The number of bytes actually written.
diff --git a/generic/tclZlib.c b/generic/tclZlib.c
index 3673833..540b779 100644
--- a/generic/tclZlib.c
+++ b/generic/tclZlib.c
@@ -17,6 +17,7 @@
#include "tclInt.h"
#ifdef HAVE_ZLIB
#include <zlib.h>
+#include "tclIO.h"
/*
* Magic flags used with wbits fields to indicate that we're handling the gzip
@@ -90,6 +91,7 @@ typedef struct {
GzipHeader outHeader; /* Header to write to an output stream, when
* compressing a gzip stream. */
Tcl_TimerToken timer; /* Timer used for keeping events fresh. */
+ Tcl_DString result; /* Buffer for decompression results */
} ZlibChannelData;
/*
@@ -119,6 +121,12 @@ typedef struct {
#define TRANSFORM_FLUSH_DELAY 5
/*
+ * Convenience macro to make some casts easier to use.
+ */
+
+#define UCHARP(x) ((unsigned char *) (x))
+
+/*
* Prototypes for private procedures defined later in this file:
*/
@@ -147,6 +155,9 @@ static void ZlibTransformTimerKill(ZlibChannelData *cd);
static void ZlibTransformTimerRun(ClientData clientData);
static void ZlibTransformTimerSetup(ZlibChannelData *cd);
+static int ResultCopy(Tcl_DString* r, unsigned char *buf, int toRead);
+static int ResultGenerate(ZlibChannelData *cd, int n, int flush, int* errorCodePtr);
+
/*
* Type of zlib-based compressing and decompressing channels.
*/
@@ -2320,6 +2331,8 @@ ZlibTransformClose(
* Release all memory.
*/
+ Tcl_DStringFree (&cd->result);
+
if (cd->inBuffer) {
ckfree(cd->inBuffer);
cd->inBuffer = NULL;
@@ -2342,77 +2355,130 @@ ZlibTransformInput(
ZlibChannelData *cd = instanceData;
Tcl_DriverInputProc *inProc =
Tcl_ChannelInputProc(Tcl_GetChannelType(cd->parent));
- int e, readBytes, flush = Z_NO_FLUSH;
+ int readBytes, gotBytes, copied;
if (cd->mode == TCL_ZLIB_STREAM_DEFLATE) {
return inProc(Tcl_GetChannelInstanceData(cd->parent), buf, toRead,
errorCodePtr);
}
- cd->inStream.next_out = (Bytef *) buf;
- cd->inStream.avail_out = toRead;
- if (cd->inStream.next_in == NULL) {
- goto doReadFirst;
- }
- while (1) {
- e = inflate(&cd->inStream, flush);
- if ((e == Z_STREAM_END) || (e==Z_OK && cd->inStream.avail_out==0)) {
- return toRead - cd->inStream.avail_out;
- }
-
+ gotBytes = 0;
+ while (toRead > 0) {
/*
- * Z_BUF_ERROR can be ignored as per http://www.zlib.net/zlib_how.html
- *
- * Just indicates that the zlib couldn't consume input/produce output,
- * and is fixed by supplying more input.
+ * Loop until the request is satisfied (or no data available from
+ * below, possibly EOF).
*/
- if ((e != Z_OK) && (e != Z_BUF_ERROR)) {
- Tcl_Obj *errObj = Tcl_NewListObj(0, NULL);
+ copied = ResultCopy(&cd->result, UCHARP(buf), toRead);
+ toRead -= copied;
+ buf += copied;
+ gotBytes += copied;
- Tcl_ListObjAppendElement(NULL, errObj,
- Tcl_NewStringObj(cd->inStream.msg, -1));
- Tcl_SetChannelError(cd->parent, errObj);
- *errorCodePtr = EINVAL;
- return -1;
+ if (toRead == 0) {
+ goto stop;
}
/*
- * Check if the inflate stopped early.
+ * The buffer is exhausted, but the caller wants even more. We now
+ * have to go to the underlying channel, get more bytes and then
+ * transform them for delivery. We may not get what we want (full EOF
+ * or temporarily out of data).
+ *
+ * Length (cd->result) == 0, toRead > 0 here.
+ *
+ * The zlib transform allows us to read at most one character from the
+ * underlying channel to properly identify Z_STREAM_END without
+ * reading over the border.
*/
- if (cd->inStream.avail_in > 0) {
- continue;
+ readBytes = Tcl_ReadRaw(cd->parent, cd->inBuffer, 1);
+
+ if (readBytes < 0) {
+ /*
+ * Report errors to caller. The state of the seek system is
+ * unchanged!
+ */
+
+ if ((Tcl_GetErrno() == EAGAIN) && (gotBytes > 0)) {
+ /*
+ * EAGAIN is a special situation. If we had some data before
+ * we report that instead of the request to re-try.
+ */
+
+ goto stop;
+ }
+
+ *errorCodePtr = Tcl_GetErrno();
+ goto error;
}
- /*
- * Emptied the buffer of data from the underlying channel. Get some
- * more.
- */
+ if (readBytes == 0) {
+ /*
+ * Check wether we hit on EOF in 'parent' or not. If not
+ * differentiate between blocking and non-blocking modes. In
+ * non-blocking mode we ran temporarily out of data. Signal this
+ * to the caller via EWOULDBLOCK and error return (-1). In the
+ * other cases we simply return what we got and let the caller
+ * wait for more. On the other hand, if we got an EOF we have to
+ * convert and flush all waiting partial data.
+ */
+
+ if (!Tcl_Eof(cd->parent)) {
+ /*
+ * The state of the seek system is unchanged!
+ */
+
+ if ((gotBytes == 0) && (cd->flags & ASYNC)) {
+ *errorCodePtr = EWOULDBLOCK;
+ goto error;
+ }
+ goto stop;
+ } else {
+ /*
+ * (Semi-)Eof in parent.
+ *
+ * Now this is a bit different. The partial data waiting is
+ * converted and returned.
+ */
+
+ if (ResultGenerate (cd, 0, Z_SYNC_FLUSH, errorCodePtr) < 0) {
+ goto error;
+ }
+
+ if (Tcl_DStringLength(&cd->result) == 0) {
+ /*
+ * The drain delivered nothing.
+ */
+
+ goto stop;
+ }
+
+ /*
+ * Reset eof, force caller to drain result buffer.
+ */
+
+ ((Channel *) cd->parent)->state->flags &= ~CHANNEL_EOF;
+ continue; /* at: while (toRead > 0) */
+ }
+ } /* readBytes == 0 */
- doReadFirst:
/*
- * Hack for Bug 2762041. Disable pre-reading of lots of input, read
- * only one character. This way the Z_END_OF_STREAM can be read
- * without triggering an EOF in the base channel. The higher input
- * loops in DoReadChars() would react to that by stopping, despite the
- * transform still having data which could be read.
- *
- * This is only a hack because other transforms may not be able to
- * work around the general problem in this way.
+ * Transform the read chunk, which was not empty. Anything we get back
+ * is a transformation result to be put into our buffers, and the next
+ * iteration will put it into the result.
*/
- readBytes = Tcl_ReadRaw(cd->parent, cd->inBuffer, 1);
- if (readBytes < 0) {
- *errorCodePtr = Tcl_GetErrno();
- return -1;
- } else if (readBytes == 0) {
- flush = Z_SYNC_FLUSH;
+ if (ResultGenerate (cd, readBytes, Z_NO_FLUSH, errorCodePtr) < 0) {
+ goto error;
}
+ } /* while toRead > 0 */
- cd->inStream.next_in = (Bytef *) cd->inBuffer;
- cd->inStream.avail_in = readBytes;
- }
+ stop:
+ return gotBytes;
+
+ error:
+ gotBytes = -1;
+ goto stop;
}
static int
@@ -2521,6 +2587,11 @@ ZlibTransformSetOption( /* not used */
return Tcl_BadChannelOption(interp, optionName, chanOptions);
}
+ /*
+ * Pass all unknown options down, to deeper transforms and/or the base
+ * channel.
+ */
+
return setOptionProc(Tcl_GetChannelInstanceData(cd->parent), interp,
optionName, value);
}
@@ -2615,8 +2686,9 @@ ZlibTransformWatch(
watchProc = Tcl_ChannelWatchProc(Tcl_GetChannelType(cd->parent));
watchProc(Tcl_GetChannelInstanceData(cd->parent), mask);
- if (!(mask & TCL_READABLE)
- || (cd->inStream.avail_in == (uInt) cd->inAllocated)) {
+
+ if (!(mask & TCL_READABLE) ||
+ (Tcl_DStringLength(&cd->result) == 0)) {
ZlibTransformTimerKill(cd);
} else {
ZlibTransformTimerSetup(cd);
@@ -2804,6 +2876,8 @@ ZlibStackChannelTransform(
}
}
+ Tcl_DStringInit(&cd->result);
+
chan = Tcl_StackChannel(interp, &zlibChannelType, cd,
Tcl_GetChannelMode(channel), channel);
if (chan == NULL) {
@@ -2829,6 +2903,138 @@ ZlibStackChannelTransform(
/*
*----------------------------------------------------------------------
+ *
+ * ResultCopy --
+ *
+ * Copies the requested number of bytes from the buffer into the
+ * specified array and removes them from the buffer afterward. Copies
+ * less if there is not enough data in the buffer.
+ *
+ * Side effects:
+ * See above.
+ *
+ * Result:
+ * The number of actually copied bytes, possibly less than 'toRead'.
+ *
+ *----------------------------------------------------------------------
+ */
+
+static int
+ResultCopy(
+ Tcl_DString* ds, /* The buffer to read from */
+ unsigned char *buf, /* The buffer to copy into */
+ int toRead) /* Number of requested bytes */
+{
+ int copied;
+ int have = Tcl_DStringLength (ds);
+
+ if (have == 0) {
+ /*
+ * Nothing to copy in the case of an empty buffer.
+ */
+
+ copied = 0;
+ } else if (have > toRead) {
+ /*
+ * The internal buffer contains more than requested. Copy the
+ * requested subset to the caller, shift the remaining bytes down, and
+ * truncate.
+ */
+
+ char* src = Tcl_DStringValue (ds);
+
+ memcpy(buf, src, toRead);
+ memmove(src, src + toRead, have - toRead);
+
+ Tcl_DStringSetLength (ds, have - toRead);
+ copied = toRead;
+ } else /* have <= toRead */ {
+ /*
+ * There is just or not enough in the buffer to fully satisfy the
+ * caller, so take everything as best effort.
+ */
+
+ memcpy(buf, Tcl_DStringValue (ds), have);
+ Tcl_DStringSetLength (ds, 0);
+ copied = have;
+ }
+
+ /* -- common postwork code ------- */
+
+ return copied;
+}
+
+static int
+ResultGenerate(ZlibChannelData *cd, int n, int flush, int* errorCodePtr)
+{
+#define MAXBUF 1024
+ unsigned char buf [MAXBUF];
+ int e, written;
+
+ cd->inStream.next_in = (Bytef *) cd->inBuffer;
+ cd->inStream.avail_in = n;
+
+ while (1) {
+ cd->inStream.next_out = (Bytef *) buf;
+ cd->inStream.avail_out = MAXBUF;
+
+ e = inflate(&cd->inStream, flush);
+
+ /*
+ * avail_out is now the left over space in the output.
+ * Therefore "MAXBUF - avail_out" is the amount of bytes
+ * generated.
+ */
+
+ written = MAXBUF - cd->inStream.avail_out;
+
+ if (written) {
+ Tcl_DStringAppend (&cd->result, (char*) buf, written);
+ }
+
+ if (((flush == Z_SYNC_FLUSH) && (e == Z_BUF_ERROR)) ||
+ (e == Z_STREAM_END) ||
+ (e==Z_OK && cd->inStream.avail_out==0)) {
+ break;
+ }
+
+ /*
+ * Z_BUF_ERROR can be ignored as per http://www.zlib.net/zlib_how.html
+ *
+ * Just indicates that the zlib couldn't consume input/produce output,
+ * and is fixed by supplying more input.
+ */
+
+ if ((e != Z_OK) && (e != Z_BUF_ERROR)) {
+ Tcl_Obj *errObj = Tcl_NewListObj(0, NULL);
+
+ Tcl_ListObjAppendElement(NULL, errObj,
+ Tcl_NewStringObj(cd->inStream.msg, -1));
+ Tcl_SetChannelError(cd->parent, errObj);
+ *errorCodePtr = EINVAL;
+ return -1;
+ }
+
+ /*
+ * Check if the inflate stopped early.
+ */
+
+ if (cd->inStream.avail_in > 0) {
+ continue;
+ }
+
+ if (flush == Z_SYNC_FLUSH) {
+ continue;
+ }
+
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ *----------------------------------------------------------------------
* Finally, the TclZlibInit function. Used to install the zlib API.
*----------------------------------------------------------------------
*/