summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--doc/scan.n26
-rw-r--r--generic/tclScan.c6
-rw-r--r--tests/scan.test45
3 files changed, 45 insertions, 32 deletions
diff --git a/doc/scan.n b/doc/scan.n
index 6c93e6a..267f168 100644
--- a/doc/scan.n
+++ b/doc/scan.n
@@ -6,7 +6,7 @@
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
-'\" RCS: @(#) $Id: scan.n,v 1.6 2000/09/07 14:27:51 poenitz Exp $
+'\" RCS: @(#) $Id: scan.n,v 1.7 2000/12/10 03:27:03 hobbs Exp $
'\"
.so man.macros
.TH scan n 8.3 Tcl "Tcl Built-In Commands"
@@ -48,9 +48,7 @@ When a \fB%\fR is encountered in \fIformat\fR, it indicates
the start of a conversion specifier.
A conversion specifier contains up to four fields after the \fB%\fR:
a \fB*\fR, which indicates that the converted value is to be discarded
-.VS 8.1
instead of assigned to a variable; a XPG3 position specifier; a number
-.VE 8.1
indicating a maximum field width; and a conversion character.
All of these fields are optional except for the conversion character.
The fields that are present must appear in the order given above.
@@ -61,7 +59,6 @@ specifier is \fB[\fR or \fBc\fR).
Then it converts the next input characters according to the
conversion specifier and stores the result in the variable given
by the next argument to \fBscan\fR.
-.VS 8.1
.PP
If the \fB%\fR is followed by a decimal number and a \fB$\fR, as in
``\fB%2$d\fR'', then the variable to use is not taken from the next
@@ -72,7 +69,6 @@ specifiers must be positional. Every \fIvarName\fR on the argument
list must correspond to exactly one conversion specifier or an error
is generated, or in the inline case, any position can be specified
at most once and the empty positions will be filled in with empty strings.
-.VE 8.1
.PP
The following conversion characters are supported:
.TP 10
@@ -83,11 +79,20 @@ It is read in and the value is stored in the variable as a decimal string.
\fBo\fR
The input field must be an octal integer. It is read in and the
value is stored in the variable as a decimal string.
+.VS 8.4
+If the value exceeds MAX_INT (017777777777 on platforms using 32-bit
+integers), it will be truncated to a signed integer. Hence, 037777777777
+will appear as -1 on a 32-bit machine.
+.VE 8.4
.TP 10
\fBx\fR
The input field must be a hexadecimal integer. It is read in
and the value is stored in the variable as a decimal string.
-.VS 8.1
+.VS 8.4
+If the value exceeds MAX_INT (0x7FFFFFFF on platforms using 32-bit
+integers), it will be truncated to a signed integer. Hence, 0xFFFFFFFF
+will appear as -1 on a 32-bit machine.
+.VE 8.4
.TP 10
\fBu\fR
The input field must be a decimal integer. The value is stored in the
@@ -97,7 +102,6 @@ variable as an unsigned decimal integer string.
The input field must be an integer. The base (i.e. decimal, octal, or
hexadecimal) is determined in the same fashion as described in
\fBexpr\fR. The value is stored in the variable as a decimal string.
-.VE 8.1
.TP 10
\fBc\fR
A single character is read in and its binary value is stored in
@@ -127,13 +131,11 @@ The matching string is stored in the variable.
If the first character between the brackets is a \fB]\fR then
it is treated as part of \fIchars\fR rather than the closing
bracket for the set.
-.VS 8.1
If \fIchars\fR
contains a sequence of the form \fIa\fB\-\fIb\fR then any
character between \fIa\fR and \fIb\fR (inclusive) will match.
If the first or last character between the brackets is a \fB\-\fR, then
it is treated as part of \fIchars\fR rather than indicating a range.
-.VE 8.1
.TP 10
\fB[^\fIchars\fB]\fR
The input field consists of any number of characters not in
@@ -142,7 +144,6 @@ The matching string is stored in the variable.
If the character immediately following the \fB^\fR is a \fB]\fR then it is
treated as part of the set rather than the closing bracket for
the set.
-.VS 8.1
If \fIchars\fR
contains a sequence of the form \fIa\fB\-\fIb\fR then any
character between \fIa\fR and \fIb\fR (inclusive) will be excluded
@@ -153,7 +154,6 @@ it is treated as part of \fIchars\fR rather than indicating a range.
\fBn\fR
No input is consumed from the input string. Instead, the total number
of chacters scanned from the input string so far is stored in the variable.
-.VE 8.1
.LP
The number of characters read from the input for a conversion is the
largest number that makes sense for that particular conversion (e.g.
@@ -169,10 +169,8 @@ then no variable is assigned and the next scan argument is not consumed.
.PP
The behavior of the \fBscan\fR command is the same as the behavior of
the ANSI C \fBsscanf\fR procedure except for the following differences:
-.VS 8.1
.IP [1]
\fB%p\fR conversion specifier is not currently supported.
-.VE 8.1
.IP [2]
For \fB%c\fR conversions a single character value is
converted to a decimal string, which is then assigned to the
@@ -184,8 +182,8 @@ values are always converted as if there were no modifier present
and real values are always converted as if the \fBl\fR modifier
were present (i.e. type \fBdouble\fR is used for the internal
representation).
-.VS 8.3
.IP [4]
+.VS 8.3
If the end of the input string is reached before any conversions have been
performed and no variables are given, and empty string is returned.
.VE 8.3
diff --git a/generic/tclScan.c b/generic/tclScan.c
index bf238cf..2cd48d4 100644
--- a/generic/tclScan.c
+++ b/generic/tclScan.c
@@ -8,7 +8,7 @@
* See the file "license.terms" for information on usage and redistribution
* of this file, and for a DISCLAIMER OF ALL WARRANTIES.
*
- * RCS: @(#) $Id: tclScan.c,v 1.6 1999/11/30 01:42:59 hobbs Exp $
+ * RCS: @(#) $Id: tclScan.c,v 1.7 2000/12/10 03:27:04 hobbs Exp $
*/
#include "tclInt.h"
@@ -694,12 +694,12 @@ Tcl_ScanObjCmd(dummy, interp, objc, objv)
case 'o':
op = 'i';
base = 8;
- fn = (long (*)())strtol;
+ fn = (long (*)())strtoul;
break;
case 'x':
op = 'i';
base = 16;
- fn = (long (*)())strtol;
+ fn = (long (*)())strtoul;
break;
case 'u':
op = 'i';
diff --git a/tests/scan.test b/tests/scan.test
index 2624dd2..d7204a9 100644
--- a/tests/scan.test
+++ b/tests/scan.test
@@ -11,7 +11,7 @@
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
-# RCS: @(#) $Id: scan.test,v 1.10 2000/04/10 17:19:04 ericm Exp $
+# RCS: @(#) $Id: scan.test,v 1.11 2000/12/10 03:27:04 hobbs Exp $
if {[lsearch [namespace children] ::tcltest] == -1} {
package require tcltest
@@ -324,6 +324,35 @@ test scan-4.61 {Tcl_ScanObjCmd, set errors} {
set result
} {1 {couldn't set variable "z"couldn't set variable "y"} abc}
+# procedure that returns the range of integers
+
+proc int_range {} {
+ for { set MIN_INT 1 } { $MIN_INT > 0 } {} {
+ set MIN_INT [expr { $MIN_INT << 1 }]
+ }
+ set MAX_INT [expr { ~ $MIN_INT }]
+ return [list $MIN_INT $MAX_INT]
+}
+
+test scan-4.62 {scanning of large and negative octal integers} {
+ foreach { MIN_INT MAX_INT } [int_range] {}
+ set scanstring [format {%o %o %o} -1 $MIN_INT $MAX_INT]
+ list [scan $scanstring {%o %o %o} a b c] \
+ [expr { $a == -1 }] [expr { $b == $MIN_INT }] [expr { $c == $MAX_INT }]
+} {3 1 1 1}
+test scan-4.63 {scanning of large and negative hex integers} {
+ foreach { MIN_INT MAX_INT } [int_range] {}
+ set scanstring [format {%x %x %x} -1 $MIN_INT $MAX_INT]
+ list [scan $scanstring {%x %x %x} a b c] \
+ [expr { $a == -1 }] [expr { $b == $MIN_INT }] [expr { $c == $MAX_INT }]
+} {3 1 1 1}
+
+# clean up from last two tests
+
+catch {
+ rename int_range {}
+}
+
test scan-5.1 {integer scanning} {
set a {}; set b {}; set c {}; set d {}
list [scan "-20 1476 \n33 0" "%d %d %d %d" a b c d] $a $b $c $d
@@ -630,17 +659,3 @@ test scan-13.8 {Tcl_ScanObjCmd, inline XPG case lots of arguments} {
# cleanup
::tcltest::cleanupTests
return
-
-
-
-
-
-
-
-
-
-
-
-
-
-