diff options
| -rw-r--r-- | ChangeLog | 7 | ||||
| -rw-r--r-- | library/http/http.tcl | 316 | ||||
| -rw-r--r-- | library/http/pkgIndex.tcl | 2 | ||||
| -rw-r--r-- | unix/Makefile.in | 6 | ||||
| -rw-r--r-- | win/Makefile.in | 6 |
5 files changed, 192 insertions, 145 deletions
@@ -1,3 +1,10 @@ +2009-04-09 Don Porter <dgp@users.sourceforge.net> + + * library/http/http.tcl: Backport http 2.7.3 from HEAD for + * library/http/pkgIndex.tcl: bundling with the Tcl 8.5.7 release. + * unix/Makefile.in: + * win/Makefile.in: + 2009-04-08 Andreas Kupries <andreask@activestate.com> * library/platform/platform.tcl: Extended the darwin sections to diff --git a/library/http/http.tcl b/library/http/http.tcl index 06829cd..5dbce3c 100644 --- a/library/http/http.tcl +++ b/library/http/http.tcl @@ -1,19 +1,19 @@ # http.tcl -- # # Client-side HTTP for GET, POST, and HEAD commands. These routines can -# be used in untrusted code that uses the Safesock security policy. These -# procedures use a callback interface to avoid using vwait, which is not -# defined in the safe base. +# be used in untrusted code that uses the Safesock security policy. +# These procedures use a callback interface to avoid using vwait, which +# is not defined in the safe base. # # See the file "license.terms" for information on usage and redistribution of # this file, and for a DISCLAIMER OF ALL WARRANTIES. # -# RCS: @(#) $Id: http.tcl,v 1.67.2.5 2008/10/23 23:34:32 patthoyts Exp $ +# RCS: @(#) $Id: http.tcl,v 1.67.2.6 2009/04/09 17:05:39 dgp Exp $ package require Tcl 8.4 -# Keep this in sync with pkgIndex.tcl and with the install directories -# in Makefiles -package provide http 2.7.2 +# Keep this in sync with pkgIndex.tcl and with the install directories in +# Makefiles +package provide http 2.7.3 namespace eval http { # Allow resourcing to not clobber existing data @@ -32,9 +32,9 @@ namespace eval http { proc init {} { # Set up the map for quoting chars. RFC3986 Section 2.3 say percent - # encode all except: "... percent-encoded octets in the ranges of ALPHA - # (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period (%2E), - # underscore (%5F), or tilde (%7E) should not be created by URI + # encode all except: "... percent-encoded octets in the ranges of + # ALPHA (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period + # (%2E), underscore (%5F), or tilde (%7E) should not be created by URI # producers ..." for {set i 0} {$i <= 256} {incr i} { set c [format %c $i] @@ -101,9 +101,9 @@ proc http::Log {args} {} # See documentation for details. # # Arguments: -# proto URL protocol prefix, e.g. https -# port Default port for protocol -# command Command to use to create socket +# proto URL protocol prefix, e.g. https +# port Default port for protocol +# command Command to use to create socket # Results: # list of port and command that was registered. @@ -117,7 +117,7 @@ proc http::register {proto port command} { # Unregisters URL protocol handler # # Arguments: -# proto URL protocol prefix, e.g. https +# proto URL protocol prefix, e.g. https # Results: # list of port and command that was unregistered. @@ -152,21 +152,19 @@ proc http::config {args} { return $result } set options [string map {- ""} $options] - set pat ^-([join $options |])$ + set pat ^-(?:[join $options |])$ if {[llength $args] == 1} { set flag [lindex $args 0] - if {[regexp -- $pat $flag]} { - return $http($flag) - } else { + if {![regexp -- $pat $flag]} { return -code error "Unknown option $flag, must be: $usage" } + return $http($flag) } else { foreach {flag value} $args { - if {[regexp -- $pat $flag]} { - set http($flag) $value - } else { + if {![regexp -- $pat $flag]} { return -code error "Unknown option $flag, must be: $usage" } + set http($flag) $value } } } @@ -179,14 +177,14 @@ proc http::config {args} { # token Connection token. # errormsg (optional) If set, forces status to error. # skipCB (optional) If set, don't call the -command callback. This -# is useful when geturl wants to throw an exception instead -# of calling the callback. That way, the same error isn't -# reported to two places. +# is useful when geturl wants to throw an exception instead +# of calling the callback. That way, the same error isn't +# reported to two places. # # Side Effects: # Closes the socket -proc http::Finish { token {errormsg ""} {skipCB 0}} { +proc http::Finish {token {errormsg ""} {skipCB 0}} { variable $token upvar 0 $token state global errorInfo errorCode @@ -194,12 +192,15 @@ proc http::Finish { token {errormsg ""} {skipCB 0}} { set state(error) [list $errormsg $errorInfo $errorCode] set state(status) "error" } - if {($state(status) eq "timeout") || ($state(status) eq "error") - || ([info exists state(connection)] && ($state(connection) eq "close")) - } { + if { + ($state(status) eq "timeout") || ($state(status) eq "error") || + ([info exists state(connection)] && ($state(connection) eq "close")) + } then { CloseSocket $state(sock) $token } - if {[info exists state(after)]} { after cancel $state(after) } + if {[info exists state(after)]} { + after cancel $state(after) + } if {[info exists state(-command)] && !$skipCB} { if {[catch {eval $state(-command) {$token}} err]} { if {$errormsg eq ""} { @@ -214,10 +215,10 @@ proc http::Finish { token {errormsg ""} {skipCB 0}} { # http::CloseSocket - # -# Close a socket and remove it from the persistent sockets table. -# If possible an http token is included here but when we are called -# from a fileevent on remote closure we need to find the correct -# entry - hence the second section. +# Close a socket and remove it from the persistent sockets table. If +# possible an http token is included here but when we are called from a +# fileevent on remote closure we need to find the correct entry - hence +# the second section. proc ::http::CloseSocket {s {token {}}} { variable socketmap @@ -227,23 +228,27 @@ proc ::http::CloseSocket {s {token {}}} { variable $token upvar 0 $token state if {[info exists state(socketinfo)]} { - set conn_id $state(socketinfo) + set conn_id $state(socketinfo) } } else { set map [array get socketmap] set ndx [lsearch -exact $map $s] if {$ndx != -1} { - incr ndx -1 - set conn_id [lindex $map $ndx] + incr ndx -1 + set conn_id [lindex $map $ndx] } } if {$conn_id eq {} || ![info exists socketmap($conn_id)]} { Log "Closing socket $s (no connection info)" - if {[catch {close $s} err]} { Log "Error: $err" } + if {[catch {close $s} err]} { + Log "Error: $err" + } } else { if {[info exists socketmap($conn_id)]} { Log "Closing connection $conn_id (sock $socketmap($conn_id))" - if {[catch {close $socketmap($conn_id)} err]} { Log "Error: $err" } + if {[catch {close $socketmap($conn_id)} err]} { + Log "Error: $err" + } unset socketmap($conn_id) } else { Log "Cannot close connection $conn_id - no socket in socket map" @@ -262,7 +267,7 @@ proc ::http::CloseSocket {s {token {}}} { # Side Effects: # See Finish -proc http::reset { token {why reset} } { +proc http::reset {token {why reset}} { variable $token upvar 0 $token state set state(status) $why @@ -285,10 +290,10 @@ proc http::reset { token {why reset} } { # args Option value pairs. Valid options include: # -blocksize, -validate, -headers, -timeout # Results: -# Returns a token for this connection. This token is the name of an array -# that the caller should unset to garbage collect the state. +# Returns a token for this connection. This token is the name of an +# array that the caller should unset to garbage collect the state. -proc http::geturl { url args } { +proc http::geturl {url args} { variable http variable urlTypes variable defaultCharset @@ -351,14 +356,17 @@ proc http::geturl { url args } { } set usage [join [lsort $options] ", "] set options [string map {- ""} $options] - set pat ^-([join $options |])$ + set pat ^-(?:[join $options |])$ foreach {flag value} $args { if {[regexp -- $pat $flag]} { # Validate numbers - if {[info exists type($flag)] && - ![string is $type($flag) -strict $value]} { + if { + [info exists type($flag)] && + ![string is $type($flag) -strict $value] + } then { unset $token - return -code error "Bad value for $flag ($value), must be $type($flag)" + return -code error \ + "Bad value for $flag ($value), must be $type($flag)" } set state($flag) $value } else { @@ -397,7 +405,9 @@ proc http::geturl { url args } { # pass it in here, but it's cheap to strip). # # An example of a URL that has all the parts: - # http://jschmoe:xyzzy@www.bogus.net:8000/foo/bar.tml?q=foo#changes + # + # http://jschmoe:xyzzy@www.bogus.net:8000/foo/bar.tml?q=foo#changes + # # The "http" is the protocol, the user is "jschmoe", the password is # "xyzzy", the host is "www.bogus.net", the port is "8000", the path is # "/foo/bar.tml", the query is "q=foo", and the fragment is "changes". @@ -408,9 +418,8 @@ proc http::geturl { url args } { # Also note that we do not currently support IPv6 addresses. # # From a validation perspective, we need to ensure that the parts of the - # URL that are going to the server are correctly encoded. - # This is only done if $state(-strict) is true (inherited from - # $::http::strict). + # URL that are going to the server are correctly encoded. This is only + # done if $state(-strict) is true (inherited from $::http::strict). set URLmatcher {(?x) # this is _expanded_ syntax ^ @@ -481,7 +490,7 @@ proc http::geturl { url args } { # Provide a better error message in this error case if {[regexp {(?i)%(?![0-9a-f][0-9a-f])..} $srvurl bad]} { return -code error \ - "Illegal encoding character usage \"$bad\" in URL path" + "Illegal encoding character usage \"$bad\" in URL path" } return -code error "Illegal characters in URL path" } @@ -565,15 +574,15 @@ proc http::geturl { url args } { lappend sockopts -myaddr $state(-myaddr) } if {[catch {eval $defcmd $sockopts $targetAddr} sock]} { - # something went wrong while trying to establish the - # connection. Clean up after events and such, but DON'T call the - # command callback (if available) because we're going to throw an - # exception from here instead. + # something went wrong while trying to establish the connection. + # Clean up after events and such, but DON'T call the command + # callback (if available) because we're going to throw an + # exception from here instead. set state(sock) $sock - Finish $token "" 1 - cleanup $token - return -code error $sock + Finish $token "" 1 + cleanup $token + return -code error $sock } } set state(sock) $sock @@ -591,8 +600,8 @@ proc http::geturl { url args } { if {![info exists state]} { # If we timed out then Finish has been called and the users - # command callback may have cleaned up the token. If so - # we end up here with nothing left to do. + # command callback may have cleaned up the token. If so we end up + # here with nothing left to do. return $token } elseif {$state(status) eq "error"} { # Something went wrong while trying to establish the connection. @@ -646,11 +655,11 @@ proc http::geturl { url args } { puts $sock "Accept: $http(-accept)" array set hdrs $state(-headers) if {[info exists hdrs(Host)]} { - # Allow Host spoofing [Bug 928154] + # Allow Host spoofing. [Bug 928154] puts $sock "Host: $hdrs(Host)" } elseif {$port == $defport} { - # Don't add port in this case, to handle broken servers. - # [Bug #504508] + # Don't add port in this case, to handle broken servers. [Bug + # #504508] puts $sock "Host: $host" } else { puts $sock "Host: $host:$port" @@ -658,20 +667,22 @@ proc http::geturl { url args } { unset hdrs puts $sock "User-Agent: $http(-useragent)" if {$state(-protocol) == 1.0 && $state(-keepalive)} { - puts $sock "Connection: keep-alive" + puts $sock "Connection: keep-alive" } if {$state(-protocol) > 1.0 && !$state(-keepalive)} { - puts $sock "Connection: close" ;# RFC2616 sec 8.1.2.1 + puts $sock "Connection: close" ;# RFC2616 sec 8.1.2.1 } if {[info exists phost] && ($phost ne "") && $state(-keepalive)} { - puts $sock "Proxy-Connection: Keep-Alive" + puts $sock "Proxy-Connection: Keep-Alive" } set accept_encoding_seen 0 foreach {key value} $state(-headers) { - if {[string equal -nocase $key "host"]} { continue } - if {[string equal -nocase $key "accept-encoding"]} { - set accept_encoding_seen 1 - } + if {[string equal -nocase $key "host"]} { + continue + } + if {[string equal -nocase $key "accept-encoding"]} { + set accept_encoding_seen 1 + } set value [string map [list \n "" \r ""] $value] set key [string trim $key] if {[string equal -nocase $key "content-length"]} { @@ -683,10 +694,13 @@ proc http::geturl { url args } { } } # Soft zlib dependency check - no package require - if {!$accept_encoding_seen && [llength [package provide zlib]] - && !([info exists state(-channel)] || [info exists state(-handler)]) - } { - puts $sock "Accept-Encoding: gzip, identity, *;q=0.1" + if { + !$accept_encoding_seen && + ([package vsatisfies [package provide Tcl] 8.6] + || [llength [package provide zlib]]) && + !([info exists state(-channel)] || [info exists state(-handler)]) + } then { + puts $sock "Accept-Encoding: gzip, identity, *;q=0.1" } if {$isQueryChannel && $state(querylength) == 0} { # Try to determine size of data in channel. If we cannot seek, the @@ -707,13 +721,14 @@ proc http::geturl { url args } { # It is possible to have both the read and write fileevents active at # this point. The only scenario it seems to affect is a server that # closes the connection without reading the POST data. (e.g., early - # versions TclHttpd in various error cases). Depending on the platform, - # the client may or may not be able to get the response from the server - # because of the error it will get trying to write the post data. - # Having both fileevents active changes the timing and the behavior, - # but no two platforms (among Solaris, Linux, and NT) behave the same, - # and none behave all that well in any case. Servers should always read - # their POST data if they expect the client to read their response. + # versions TclHttpd in various error cases). Depending on the + # platform, the client may or may not be able to get the response from + # the server because of the error it will get trying to write the post + # data. Having both fileevents active changes the timing and the + # behavior, but no two platforms (among Solaris, Linux, and NT) behave + # the same, and none behave all that well in any case. Servers should + # always read their POST data if they expect the client to read their + # response. if {$isQuery || $isQueryChannel} { puts $sock "Content-Type: $state(-type)" @@ -729,7 +744,7 @@ proc http::geturl { url args } { fileevent $sock readable [list http::Event $sock $token] } - if {! [info exists state(-command)]} { + if {![info exists state(-command)]} { # geturl does EVERYTHING asynchronously, so if the user calls it # synchronously, we just do a wait here. @@ -740,7 +755,7 @@ proc http::geturl { url args } { return -code error [lindex $state(error) 0] } } - } err]} { + } err]} then { # The socket probably was never connected, or the connection dropped # later. @@ -772,7 +787,9 @@ proc http::data {token} { return $state(body) } proc http::status {token} { - if {![info exists $token]} { return "error" } + if {![info exists $token]} { + return "error" + } variable $token upvar 0 $token state return $state(status) @@ -843,9 +860,11 @@ proc http::Connect {token} { variable $token upvar 0 $token state global errorInfo errorCode - if {[eof $state(sock)] || - [string length [fconfigure $state(sock) -error]]} { - Finish $token "connect failed [fconfigure $state(sock) -error]" 1 + if { + [eof $state(sock)] || + [string length [fconfigure $state(sock) -error]] + } then { + Finish $token "connect failed [fconfigure $state(sock) -error]" 1 } else { set state(status) connect fileevent $state(sock) writable {} @@ -896,7 +915,7 @@ proc http::Write {token} { set done 1 } } - } err]} { + } err]} then { # Do not call Finish here, but instead let the read half of the socket # process whatever server reply there is to get. @@ -934,8 +953,8 @@ proc http::Event {sock token} { if {![info exists state]} { Log "Event $sock with invalid token '$token' - remote close?" - if {! [eof $sock]} { - if {[string length [set d [read $sock]]] != 0} { + if {![eof $sock]} { + if {[set d [read $sock]] ne ""} { Log "WARNING: additional data left on closed socket" } } @@ -943,9 +962,10 @@ proc http::Event {sock token} { return } if {$state(state) eq "connecting"} { - set state(state) "header" if {[catch {gets $sock state(http)} n]} { return [Finish $token $n] + } elseif {$n >= 0} { + set state(state) "header" } } elseif {$state(state) eq "header"} { if {[catch {gets $sock line} n]} { @@ -953,7 +973,9 @@ proc http::Event {sock token} { } elseif {$n == 0} { # We have now read all headers # We ignore HTTP/1.1 100 Continue returns. RFC2616 sec 8.2.3 - if {$state(http) == "" || [lindex $state(http) 1] == 100} { return } + if {$state(http) == "" || [lindex $state(http) 1] == 100} { + return + } set state(state) body @@ -963,14 +985,15 @@ proc http::Event {sock token} { return } - # For non-chunked transfer we may have no body -- in this case we - # may get no further file event if the connection doesn't close and - # no more data is sent. We can tell and must finish up now - not - # later. - if {!(([info exists state(connection)] - && ($state(connection) eq "close")) - || [info exists state(transfer)]) - && $state(totalsize) == 0 + # For non-chunked transfer we may have no body - in this case we + # may get no further file event if the connection doesn't close + # and no more data is sent. We can tell and must finish up now - + # not later. + if { + !(([info exists state(connection)] + && ($state(connection) eq "close")) + || [info exists state(transfer)]) + && ($state(totalsize) == 0) } then { Log "body size is 0 and no events likely - complete." Eof $token @@ -980,18 +1003,24 @@ proc http::Event {sock token} { # We have to use binary translation to count bytes properly. fconfigure $sock -translation binary - if {$state(-binary) || ![string match -nocase text* $state(type)]} { + if { + $state(-binary) || ![string match -nocase text* $state(type)] + } then { # Turn off conversions for non-text data set state(binary) 1 } - if {$state(binary) || [string match *gzip* $state(coding)] - || [string match *compress* $state(coding)]} { + if { + $state(binary) || [string match *gzip* $state(coding)] || + [string match *compress* $state(coding)] + } then { if {[info exists state(-channel)]} { fconfigure $state(-channel) -translation binary } } - if {[info exists state(-channel)] && - ![info exists state(-handler)]} { + if { + [info exists state(-channel)] && + ![info exists state(-handler)] + } then { # Initiate a sequence of background fcopies fileevent $sock readable {} CopyStart $sock $token @@ -1041,8 +1070,10 @@ proc http::Event {sock token} { Log "final chunk part" Eof $token } - } elseif {[info exists state(transfer)] - && $state(transfer) eq "chunked"} { + } elseif { + [info exists state(transfer)] + && $state(transfer) eq "chunked" + } then { set size 0 set chunk [getTextLine $sock] set n [string length $chunk] @@ -1079,12 +1110,14 @@ proc http::Event {sock token} { incr state(currentsize) $n } # If Content-Length - check for end of data. - if {($state(totalsize) > 0) - && ($state(currentsize) >= $state(totalsize))} { + if { + ($state(totalsize) > 0) + && ($state(currentsize) >= $state(totalsize)) + } then { Eof $token } } - } err]} { + } err]} then { return [Finish $token $err] } else { if {[info exists state(-progress)]} { @@ -1143,7 +1176,7 @@ proc http::CopyStart {sock token} { if {[catch { fcopy $sock $state(-channel) -size $state(-blocksize) -command \ [list http::CopyDone $token] - } err]} { + } err]} then { Finish $token $err } } @@ -1200,22 +1233,26 @@ proc http::Eof {token {force 0}} { if {($state(coding) eq "gzip") && [string length $state(body)] > 0} { if {[catch { - set state(body) [Gunzip $state(body)] - } err]} { - return [Finish $token $err] + if {[package vsatisfies [package present Tcl] 8.6]} { + # The zlib integration into 8.6 includes proper gzip support + set state(body) [zlib gunzip $state(body)] + } else { + set state(body) [Gunzip $state(body)] + } + } err]} then { + return [Finish $token $err] } } if {!$state(binary)} { - - # If we are getting text, set the incoming channel's - # encoding correctly. iso8859-1 is the RFC default, but - # this could be any IANA charset. However, we only know - # how to convert what we have encodings for. + # If we are getting text, set the incoming channel's encoding + # correctly. iso8859-1 is the RFC default, but this could be any IANA + # charset. However, we only know how to convert what we have + # encodings for. set enc [CharsetToEncoding $state(charset)] if {$enc ne "binary"} { - set state(body) [encoding convertfrom $enc $state(body)] + set state(body) [encoding convertfrom $enc $state(body)] } # Translate text line endings. @@ -1317,8 +1354,10 @@ proc http::mapReply {string} { proc http::ProxyRequired {host} { variable http if {[info exists http(-proxyhost)] && [string length $http(-proxyhost)]} { - if {![info exists http(-proxyport)] || \ - ![string length $http(-proxyport)]} { + if { + ![info exists http(-proxyport)] || + ![string length $http(-proxyport)] + } then { set http(-proxyport) 8080 } return [list $http(-proxyhost) $http(-proxyport)] @@ -1327,33 +1366,33 @@ proc http::ProxyRequired {host} { # http::CharsetToEncoding -- # -# Tries to map a given IANA charset to a tcl encoding. -# If no encoding can be found, returns binary. +# Tries to map a given IANA charset to a tcl encoding. If no encoding +# can be found, returns binary. # proc http::CharsetToEncoding {charset} { variable encodings set charset [string tolower $charset] - if {[regexp {iso-?8859-([0-9]+)} $charset - num]} { + if {[regexp {iso-?8859-([0-9]+)} $charset -> num]} { set encoding "iso8859-$num" - } elseif {[regexp {iso-?2022-(jp|kr)} $charset - ext]} { + } elseif {[regexp {iso-?2022-(jp|kr)} $charset -> ext]} { set encoding "iso2022-$ext" - } elseif {[regexp {shift[-_]?js} $charset -]} { + } elseif {[regexp {shift[-_]?js} $charset]} { set encoding "shiftjis" - } elseif {[regexp {(windows|cp)-?([0-9]+)} $charset - - num]} { + } elseif {[regexp {(?:windows|cp)-?([0-9]+)} $charset -> num]} { set encoding "cp$num" } elseif {$charset eq "us-ascii"} { set encoding "ascii" - } elseif {[regexp {(iso-?)?lat(in)?-?([0-9]+)} $charset - - - num]} { + } elseif {[regexp {(?:iso-?)?lat(?:in)?-?([0-9]+)} $charset -> num]} { switch -- $num { 5 {set encoding "iso8859-9"} - 1 - - 2 - - 3 {set encoding "iso8859-$num"} + 1 - 2 - 3 { + set encoding "iso8859-$num" + } } } else { - # other charset, like euc-xx, utf-8,... may directly maps to encoding + # other charset, like euc-xx, utf-8,... may directly map to encoding set encoding $charset } set idx [lsearch -exact $encodings $encoding] @@ -1380,9 +1419,10 @@ proc http::Gunzip {data} { return -code error "invalid compression method" } + # lassign [split $flags ""] f_text f_crc f_extra f_name f_comment foreach {f_text f_crc f_extra f_name f_comment} [split $flags ""] break set extra "" - if { $f_extra } { + if {$f_extra} { binary scan $data @${pos}S xlen incr pos 2 set extra [string range $data $pos $xlen] @@ -1390,21 +1430,21 @@ proc http::Gunzip {data} { } set name "" - if { $f_name } { + if {$f_name} { set ndx [string first \0 $data $pos] set name [string range $data $pos $ndx] set pos [incr ndx] } set comment "" - if { $f_comment } { + if {$f_comment} { set ndx [string first \0 $data $pos] set comment [string range $data $pos $ndx] set pos [incr ndx] } set fcrc "" - if { $f_crc } { + if {$f_crc} { set fcrc [string range $data $pos [incr pos]] incr pos } @@ -1412,7 +1452,7 @@ proc http::Gunzip {data} { binary scan [string range $data end-7 end] ii crc size set inflated [zlib inflate [string range $data $pos end-8]] set chk [zlib crc32 $inflated] - if { ($crc & 0xffffffff) != ($chk & 0xffffffff)} { + if {($crc & 0xffffffff) != ($chk & 0xffffffff)} { return -code error "invalid data: checksum mismatch $crc != $chk" } return $inflated diff --git a/library/http/pkgIndex.tcl b/library/http/pkgIndex.tcl index 6badcea..07724d3 100644 --- a/library/http/pkgIndex.tcl +++ b/library/http/pkgIndex.tcl @@ -1,4 +1,4 @@ # Tcl package index file, version 1.1 if {![package vsatisfies [package provide Tcl] 8.4]} {return} -package ifneeded http 2.7.2 [list tclPkgSetup $dir http 2.7.2 {{http.tcl source {::http::config ::http::formatQuery ::http::geturl ::http::reset ::http::wait ::http::register ::http::unregister ::http::mapReply}}}] +package ifneeded http 2.7.3 [list tclPkgSetup $dir http 2.7.3 {{http.tcl source {::http::config ::http::formatQuery ::http::geturl ::http::reset ::http::wait ::http::register ::http::unregister ::http::mapReply}}}] diff --git a/unix/Makefile.in b/unix/Makefile.in index 227177f..17561a5 100644 --- a/unix/Makefile.in +++ b/unix/Makefile.in @@ -4,7 +4,7 @@ # "./configure", which is a configuration script generated by the "autoconf" # program (constructs like "@foo@" will get replaced in the actual Makefile. # -# RCS: @(#) $Id: Makefile.in,v 1.229.2.13 2009/04/08 19:11:52 andreas_kupries Exp $ +# RCS: @(#) $Id: Makefile.in,v 1.229.2.14 2009/04/09 17:05:41 dgp Exp $ VERSION = @TCL_VERSION@ MAJOR_VERSION = @TCL_MAJOR_VERSION@ @@ -786,8 +786,8 @@ install-libraries: libraries $(INSTALL_TZDATA) install-msgs do \ $(INSTALL_DATA) $$i "$(SCRIPT_INSTALL_DIR)"/http1.0; \ done; - @echo "Installing package http 2.7.2 as a Tcl Module"; - @$(INSTALL_DATA) $(TOP_DIR)/library/http/http.tcl "$(SCRIPT_INSTALL_DIR)"/../tcl8/8.4/http-2.7.2.tm; + @echo "Installing package http 2.7.3 as a Tcl Module"; + @$(INSTALL_DATA) $(TOP_DIR)/library/http/http.tcl "$(SCRIPT_INSTALL_DIR)"/../tcl8/8.4/http-2.7.3.tm; @echo "Installing library opt0.4 directory"; @for i in $(TOP_DIR)/library/opt/*.tcl ; \ do \ diff --git a/win/Makefile.in b/win/Makefile.in index 35bdd97..7ae9c93 100644 --- a/win/Makefile.in +++ b/win/Makefile.in @@ -4,7 +4,7 @@ # "./configure", which is a configuration script generated by the "autoconf" # program (constructs like "@foo@" will get replaced in the actual Makefile. # -# RCS: @(#) $Id: Makefile.in,v 1.124.2.8 2009/04/08 19:12:04 andreas_kupries Exp $ +# RCS: @(#) $Id: Makefile.in,v 1.124.2.9 2009/04/09 17:05:42 dgp Exp $ VERSION = @TCL_VERSION@ @@ -635,8 +635,8 @@ install-libraries: libraries install-tzdata install-msgs do \ $(COPY) "$$j" "$(SCRIPT_INSTALL_DIR)/http1.0"; \ done; - @echo "Installing package http 2.7.2 as a Tcl Module"; - @$(COPY) $(ROOT_DIR)/library/http/http.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.4/http-2.7.2.tm; + @echo "Installing package http 2.7.3 as a Tcl Module"; + @$(COPY) $(ROOT_DIR)/library/http/http.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.4/http-2.7.3.tm; @echo "Installing library opt0.4 directory"; @for j in $(ROOT_DIR)/library/opt/*.tcl; \ do \ |