diff options
| -rw-r--r-- | tests/link.test | 2 | ||||
| -rw-r--r-- | win/tclWinConsole.c | 223 | ||||
| -rw-r--r-- | win/tclWinInit.c | 20 | ||||
| -rw-r--r-- | win/tclWinInt.h | 75 | ||||
| -rw-r--r-- | win/tclWinPipe.c | 621 | ||||
| -rw-r--r-- | win/tclWinSerial.c | 93 |
6 files changed, 643 insertions, 391 deletions
diff --git a/tests/link.test b/tests/link.test index dda7d6b..6bff356 100644 --- a/tests/link.test +++ b/tests/link.test @@ -152,7 +152,7 @@ test link-2.8 {writing C variables from Tcl} -constraints {testlink} -setup { set uwide "0O" concat [testlink get] | $int $real $bool $string $wide $char $uchar $short $ushort $uint $long $ulong $float $uwide } -result {0 0.0 0 0 0 0 0 0 0 0 0 0 0.0 0 | 0x 0b 0 0 0O 0X 0B 0O 0x 0b 0o 0X 0B 0O} -test link-2.8 {writing C variables from Tcl} -constraints {testlink} -setup { +test link-2.9 {writing C variables from Tcl} -constraints {testlink} -setup { testlink delete } -body { testlink set 43 1.21 4 - 56785678 64 250 30000 60000 0xbaadbeef 12321 32123 3.25 1231231234 diff --git a/win/tclWinConsole.c b/win/tclWinConsole.c index 71facef..d61a030 100644 --- a/win/tclWinConsole.c +++ b/win/tclWinConsole.c @@ -54,11 +54,7 @@ typedef struct ConsoleThreadInfo { HANDLE readyEvent; /* Manual-reset event to signal _to_ the main * thread when the worker thread has finished * waiting for its normal work to happen. */ - HANDLE startEvent; /* Auto-reset event used by the main thread to - * signal when the thread should attempt to do - * its normal work. */ - HANDLE stopEvent; /* Auto-reset event used by the main thread to - * signal when the thread should exit. */ + TclPipeThreadInfo *TI; /* Thread info structure of writer and reader. */ } ConsoleThreadInfo; /* @@ -82,16 +78,14 @@ typedef struct ConsoleInfo { * threads. */ ConsoleThreadInfo writer; /* A specialized thread for handling * asynchronous writes to the console; the - * waiting starts when a start event is sent, + * waiting starts when a control event is sent, * and a reset event is sent back to the main - * thread when the write is done. A stop event - * is used to terminate the thread. */ + * thread when the write is done. */ ConsoleThreadInfo reader; /* A specialized thread for handling * asynchronous reads from the console; the - * waiting starts when a start event is sent, + * waiting starts when a control event is sent, * and a reset event is sent back to the main - * thread when input is available. A stop - * event is used to terminate the thread. */ + * thread when input is available. */ DWORD writeError; /* An error caused by the last background * write. Set to 0 if no error has been * detected. This word is shared with the @@ -168,10 +162,6 @@ static BOOL ReadConsoleBytes(HANDLE hConsole, LPVOID lpBuffer, static BOOL WriteConsoleBytes(HANDLE hConsole, const void *lpBuffer, DWORD nbytes, LPDWORD nbyteswritten); -static void StartChannelThread(ConsoleInfo *infoPtr, - ConsoleThreadInfo *threadInfoPtr, - LPTHREAD_START_ROUTINE threadProc); -static void StopChannelThread(ConsoleThreadInfo *threadInfoPtr); /* * This structure describes the channel type structure for command console @@ -518,84 +508,6 @@ ConsoleBlockModeProc( /* *---------------------------------------------------------------------- * - * StartChannelThread, StopChannelThread -- - * - * Helpers that codify how to ask one of the console service threads to - * start and stop. - * - *---------------------------------------------------------------------- - */ - -static void -StartChannelThread( - ConsoleInfo *infoPtr, - ConsoleThreadInfo *threadInfoPtr, - LPTHREAD_START_ROUTINE threadProc) -{ - DWORD id; - - threadInfoPtr->readyEvent = CreateEvent(NULL, TRUE, TRUE, NULL); - threadInfoPtr->startEvent = CreateEvent(NULL, FALSE, FALSE, NULL); - threadInfoPtr->stopEvent = CreateEvent(NULL, FALSE, FALSE, NULL); - threadInfoPtr->thread = CreateThread(NULL, 256, threadProc, infoPtr, 0, - &id); - SetThreadPriority(threadInfoPtr->thread, THREAD_PRIORITY_HIGHEST); -} - -static void -StopChannelThread( - ConsoleThreadInfo *threadInfoPtr) -{ - DWORD exitCode = 0; - - /* - * The thread may already have closed on it's own. Check it's exit - * code. - */ - - GetExitCodeThread(threadInfoPtr->thread, &exitCode); - if (exitCode == STILL_ACTIVE) { - /* - * Set the stop event so that if the reader thread is blocked in - * ConsoleReaderThread on WaitForMultipleEvents, it will exit cleanly. - */ - - SetEvent(threadInfoPtr->stopEvent); - - /* - * Wait at most 20 milliseconds for the reader thread to close. - */ - - if (WaitForSingleObject(threadInfoPtr->thread, 20) == WAIT_TIMEOUT) { - /* - * Forcibly terminate the background thread as a last resort. - * Note that we need to guard against terminating the thread while - * it is in the middle of Tcl_ThreadAlert because it won't be able - * to release the notifier lock. - */ - - Tcl_MutexLock(&consoleMutex); - /* BUG: this leaks memory. */ - TerminateThread(threadInfoPtr->thread, 0); - Tcl_MutexUnlock(&consoleMutex); - } - } - - /* - * Close all the handles associated with the thread, and set the thread - * handle field to NULL to mark that the thread has been cleaned up. - */ - - CloseHandle(threadInfoPtr->thread); - CloseHandle(threadInfoPtr->readyEvent); - CloseHandle(threadInfoPtr->startEvent); - CloseHandle(threadInfoPtr->stopEvent); - threadInfoPtr->thread = NULL; -} - -/* - *---------------------------------------------------------------------- - * * ConsoleCloseProc -- * * Closes a console based IO channel. @@ -626,7 +538,10 @@ ConsoleCloseProc( */ if (consolePtr->reader.thread) { - StopChannelThread(&consolePtr->reader); + TclPipeThreadStop(&consolePtr->reader.TI, consolePtr->reader.thread); + CloseHandle(consolePtr->reader.thread); + CloseHandle(consolePtr->reader.readyEvent); + consolePtr->reader.thread = NULL; } consolePtr->validMask &= ~TCL_READABLE; @@ -643,10 +558,13 @@ ConsoleCloseProc( * prevent infinite wait on exit. [Python Bug 216289] */ - WaitForSingleObject(consolePtr->writer.readyEvent, INFINITE); + WaitForSingleObject(consolePtr->writer.readyEvent, 5000); } - StopChannelThread(&consolePtr->writer); + TclPipeThreadStop(&consolePtr->writer.TI, consolePtr->writer.thread); + CloseHandle(consolePtr->writer.thread); + CloseHandle(consolePtr->writer.readyEvent); + consolePtr->writer.thread = NULL; } consolePtr->validMask &= ~TCL_WRITABLE; @@ -812,8 +730,11 @@ ConsoleOutputProc( DWORD bytesWritten, timeout; *errorCode = 0; - timeout = (infoPtr->flags & CONSOLE_ASYNC) ? 0 : INFINITE; - if (WaitForSingleObject(threadInfo->readyEvent,timeout) == WAIT_TIMEOUT) { + + /* avoid blocking if pipe-thread exited */ + timeout = (infoPtr->flags & CONSOLE_ASYNC) || !TclPipeThreadIsAlive(&threadInfo->TI) + || TclInExit() || TclInThreadExit() ? 0 : INFINITE; + if (WaitForSingleObject(threadInfo->readyEvent, timeout) == WAIT_TIMEOUT) { /* * The writer thread is blocked waiting for a write to complete and * the channel is in non-blocking mode. @@ -853,7 +774,7 @@ ConsoleOutputProc( memcpy(infoPtr->writeBuf, buf, (size_t) toWrite); infoPtr->toWrite = toWrite; ResetEvent(threadInfo->readyEvent); - SetEvent(threadInfo->startEvent); + TclPipeThreadSignal(&threadInfo->TI); bytesWritten = toWrite; } else { /* @@ -1090,9 +1011,10 @@ WaitForRead( * Synchronize with the reader thread. */ - timeout = blocking ? INFINITE : 0; - if (WaitForSingleObject(threadInfo->readyEvent, - timeout) == WAIT_TIMEOUT) { + /* avoid blocking if pipe-thread exited */ + timeout = (!blocking || !TclPipeThreadIsAlive(&threadInfo->TI) + || TclInExit() || TclInThreadExit()) ? 0 : INFINITE; + if (WaitForSingleObject(threadInfo->readyEvent, timeout) == WAIT_TIMEOUT) { /* * The reader thread is blocked waiting for data and the channel * is in non-blocking mode. @@ -1152,7 +1074,7 @@ WaitForRead( */ ResetEvent(threadInfo->readyEvent); - SetEvent(threadInfo->startEvent); + TclPipeThreadSignal(&threadInfo->TI); } } @@ -1179,34 +1101,27 @@ static DWORD WINAPI ConsoleReaderThread( LPVOID arg) { - ConsoleInfo *infoPtr = arg; - HANDLE *handle = infoPtr->handle; - ConsoleThreadInfo *threadInfo = &infoPtr->reader; - DWORD waitResult; - HANDLE wEvents[2]; - - /* - * The first event takes precedence. - */ - - wEvents[0] = threadInfo->stopEvent; - wEvents[1] = threadInfo->startEvent; + TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg; + ConsoleInfo *infoPtr = NULL; /* access info only after success init/wait */ + HANDLE *handle = NULL; + ConsoleThreadInfo *threadInfo = NULL; + int done = 0; - for (;;) { + while (!done) { /* - * Wait for the main thread to signal before attempting to wait. + * Wait for the main thread to signal before attempting to read. */ - waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE); - - if (waitResult != (WAIT_OBJECT_0 + 1)) { - /* - * The start event was not signaled. It must be the stop event or - * an error, so exit this thread. - */ - + if (!TclPipeThreadWaitForSignal(&pipeTI)) { + /* exit */ break; } + if (!infoPtr) { + infoPtr = (ConsoleInfo *)pipeTI->clientData; + handle = infoPtr->handle; + threadInfo = &infoPtr->reader; + } + /* * Look for data on the console, but first ignore any events that are @@ -1226,6 +1141,7 @@ ConsoleReaderThread( if (err == (DWORD) EOF) { infoPtr->readFlags = CONSOLE_EOF; } + done = 1; } /* @@ -1253,6 +1169,9 @@ ConsoleReaderThread( Tcl_MutexUnlock(&consoleMutex); } + /* Worker exit, so inform the main thread or free TI-structure (if owned) */ + TclPipeThreadExit(&pipeTI); + return 0; } @@ -1279,35 +1198,27 @@ static DWORD WINAPI ConsoleWriterThread( LPVOID arg) { - ConsoleInfo *infoPtr = arg; - HANDLE *handle = infoPtr->handle; - ConsoleThreadInfo *threadInfo = &infoPtr->writer; - DWORD count, toWrite, waitResult; + TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg; + ConsoleInfo *infoPtr = NULL; /* access info only after success init/wait */ + HANDLE *handle = NULL; + ConsoleThreadInfo *threadInfo = NULL; + DWORD count, toWrite; char *buf; - HANDLE wEvents[2]; - - /* - * The first event takes precedence. - */ + int done = 0; - wEvents[0] = threadInfo->stopEvent; - wEvents[1] = threadInfo->startEvent; - - for (;;) { + while (!done) { /* * Wait for the main thread to signal before attempting to write. */ - - waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE); - - if (waitResult != (WAIT_OBJECT_0 + 1)) { - /* - * The start event was not signaled. It must be the stop event or - * an error, so exit this thread. - */ - + if (!TclPipeThreadWaitForSignal(&pipeTI)) { + /* exit */ break; } + if (!infoPtr) { + infoPtr = (ConsoleInfo *)pipeTI->clientData; + handle = infoPtr->handle; + threadInfo = &infoPtr->writer; + } buf = infoPtr->writeBuf; toWrite = infoPtr->toWrite; @@ -1320,6 +1231,7 @@ ConsoleWriterThread( if (WriteConsoleBytes(handle, buf, (DWORD) toWrite, &count) == FALSE) { infoPtr->writeError = GetLastError(); + done = 1; break; } toWrite -= count; @@ -1351,6 +1263,9 @@ ConsoleWriterThread( Tcl_MutexUnlock(&consoleMutex); } + /* Worker exit, so inform the main thread or free TI-structure (if owned) */ + TclPipeThreadExit(&pipeTI); + return 0; } @@ -1421,11 +1336,21 @@ TclWinOpenConsoleChannel( modes &= ~(ENABLE_WINDOW_INPUT | ENABLE_MOUSE_INPUT); modes |= ENABLE_LINE_INPUT; SetConsoleMode(infoPtr->handle, modes); - StartChannelThread(infoPtr, &infoPtr->reader, ConsoleReaderThread); + + infoPtr->reader.readyEvent = CreateEvent(NULL, TRUE, TRUE, NULL); + infoPtr->reader.thread = CreateThread(NULL, 256, ConsoleReaderThread, + TclPipeThreadCreateTI(&infoPtr->reader.TI, infoPtr, + infoPtr->reader.readyEvent), 0, NULL); + SetThreadPriority(infoPtr->reader.thread, THREAD_PRIORITY_HIGHEST); } if (permissions & TCL_WRITABLE) { - StartChannelThread(infoPtr, &infoPtr->writer, ConsoleWriterThread); + + infoPtr->writer.readyEvent = CreateEvent(NULL, TRUE, TRUE, NULL); + infoPtr->writer.thread = CreateThread(NULL, 256, ConsoleWriterThread, + TclPipeThreadCreateTI(&infoPtr->writer.TI, infoPtr, + infoPtr->writer.readyEvent), 0, NULL); + SetThreadPriority(infoPtr->writer.thread, THREAD_PRIORITY_HIGHEST); } /* diff --git a/win/tclWinInit.c b/win/tclWinInit.c index 8b600f6..f13e314 100644 --- a/win/tclWinInit.c +++ b/win/tclWinInit.c @@ -76,6 +76,15 @@ typedef struct { #define PROCESSOR_ARCHITECTURE_UNKNOWN 0xFFFF #endif + +/* + * Windows version dependend functions + */ +static TclWinProcs _tclWinProcs = { + NULL +}; +TclWinProcs *tclWinProcs = &_tclWinProcs; + /* * The following arrays contain the human readable strings for the Windows * platform and processor values. @@ -132,6 +141,7 @@ TclpInitPlatform(void) { WSADATA wsaData; WORD wVersionRequested = MAKEWORD(2, 2); + HINSTANCE hInstance; tclPlatform = TCL_PLATFORM_WINDOWS; @@ -150,6 +160,16 @@ TclpInitPlatform(void) TclWinInit(GetModuleHandle(NULL)); #endif + + /* + * Fill available functions depending on windows version + */ + hInstance = LoadLibraryW(L"kernel32"); + if (hInstance != NULL) { + _tclWinProcs.cancelSynchronousIo = + (BOOL (WINAPI *)(HANDLE)) GetProcAddress(hInstance, + "CancelSynchronousIo"); + } } /* diff --git a/win/tclWinInt.h b/win/tclWinInt.h index 6b098f8..76f5f68 100644 --- a/win/tclWinInt.h +++ b/win/tclWinInt.h @@ -32,6 +32,15 @@ typedef struct TCLEXCEPTION_REGISTRATION { #endif /* + * Windows version dependend functions + */ +typedef struct TclWinProcs { + BOOL (WINAPI *cancelSynchronousIo)(HANDLE); +} TclWinProcs; + +MODULE_SCOPE TclWinProcs *tclWinProcs; + +/* * Some versions of Borland C have a define for the OSVERSIONINFO for * Win32s and for NT, but not for Windows 95. * Define VER_PLATFORM_WIN32_CE for those without newer headers. @@ -86,4 +95,70 @@ MODULE_SCOPE void TclpSetAllocCache(void *); #define FILE_ATTRIBUTE_REPARSE_POINT 0x00000400 #endif +/* + *---------------------------------------------------------------------- + * Declarations of helper-workers threaded facilities for a pipe based channel. + * + * Corresponding functionality provided in "tclWinPipe.c". + *---------------------------------------------------------------------- + */ + +typedef struct TclPipeThreadInfo { + HANDLE evControl; /* Auto-reset event used by the main thread to + * signal when the pipe thread should attempt + * to do read/write operation. Additionally + * used as signal to stop (state set to -1) */ + volatile LONG state; /* Indicates current state of the thread */ + ClientData clientData; /* Referenced data of the main thread */ + HANDLE evWakeUp; /* Optional wake-up event worker set by shutdown */ +} TclPipeThreadInfo; + + +/* If pipe-workers will use some tcl subsystem, we can use ckalloc without + * more overhead for finalize thread (should be executed anyway) + * + * #define _PTI_USE_CKALLOC 1 + */ + +/* + * State of the pipe-worker. + * + * State PTI_STATE_STOP possible from idle state only, worker owns TI structure. + * Otherwise PTI_STATE_END used (main thread hold ownership of the TI). + */ + +#define PTI_STATE_IDLE 0 /* idle or not yet initialzed */ +#define PTI_STATE_WORK 1 /* in work */ +#define PTI_STATE_STOP 2 /* thread should stop work (owns TI structure) */ +#define PTI_STATE_END 4 /* thread should stop work (worker is busy) */ +#define PTI_STATE_DOWN 8 /* worker is down */ + + +MODULE_SCOPE +TclPipeThreadInfo * TclPipeThreadCreateTI(TclPipeThreadInfo **pipeTIPtr, + ClientData clientData, HANDLE wakeEvent); +MODULE_SCOPE int TclPipeThreadWaitForSignal(TclPipeThreadInfo **pipeTIPtr); + +static inline void +TclPipeThreadSignal( + TclPipeThreadInfo **pipeTIPtr) +{ + TclPipeThreadInfo *pipeTI = *pipeTIPtr; + if (pipeTI) { + SetEvent(pipeTI->evControl); + } +}; + +static inline int +TclPipeThreadIsAlive( + TclPipeThreadInfo **pipeTIPtr) +{ + TclPipeThreadInfo *pipeTI = *pipeTIPtr; + return (pipeTI && pipeTI->state != PTI_STATE_DOWN); +}; + +MODULE_SCOPE int TclPipeThreadStopSignal(TclPipeThreadInfo **pipeTIPtr, HANDLE wakeEvent); +MODULE_SCOPE void TclPipeThreadStop(TclPipeThreadInfo **pipeTIPtr, HANDLE hThread); +MODULE_SCOPE void TclPipeThreadExit(TclPipeThreadInfo **pipeTIPtr); + #endif /* _TCLWININT */ diff --git a/win/tclWinPipe.c b/win/tclWinPipe.c index 4775418..4a1e75a 100644 --- a/win/tclWinPipe.c +++ b/win/tclWinPipe.c @@ -109,24 +109,17 @@ typedef struct PipeInfo { Tcl_ThreadId threadId; /* Thread to which events should be reported. * This value is used by the reader/writer * threads. */ + TclPipeThreadInfo *writeTI; /* Thread info of writer and reader, this */ + TclPipeThreadInfo *readTI; /* structure owned by corresponding thread. */ HANDLE writeThread; /* Handle to writer thread. */ HANDLE readThread; /* Handle to reader thread. */ + HANDLE writable; /* Manual-reset event to signal when the * writer thread has finished waiting for the * current buffer to be written. */ HANDLE readable; /* Manual-reset event to signal when the * reader thread has finished waiting for * input. */ - HANDLE startWriter; /* Auto-reset event used by the main thread to - * signal when the writer thread should - * attempt to write to the pipe. */ - HANDLE stopWriter; /* Manual-reset event used to alert the reader - * thread to fall-out and exit */ - HANDLE startReader; /* Auto-reset event used by the main thread to - * signal when the reader thread should - * attempt to read from the pipe. */ - HANDLE stopReader; /* Manual-reset event used to alert the reader - * thread to fall-out and exit */ DWORD writeError; /* An error caused by the last background * write. Set to 0 if no error has been * detected. This word is shared with the @@ -1571,7 +1564,6 @@ TclpCreateCommandChannel( Tcl_Pid *pidPtr) /* An array of process identifiers. */ { char channelName[16 + TCL_INTEGER_SPACE]; - DWORD id; PipeInfo *infoPtr = ckalloc(sizeof(PipeInfo)); PipeInit(); @@ -1599,13 +1591,13 @@ TclpCreateCommandChannel( */ infoPtr->readable = CreateEvent(NULL, TRUE, TRUE, NULL); - infoPtr->startReader = CreateEvent(NULL, FALSE, FALSE, NULL); - infoPtr->stopReader = CreateEvent(NULL, TRUE, FALSE, NULL); infoPtr->readThread = CreateThread(NULL, 256, PipeReaderThread, - infoPtr, 0, &id); + TclPipeThreadCreateTI(&infoPtr->readTI, infoPtr, infoPtr->readable), + 0, NULL); SetThreadPriority(infoPtr->readThread, THREAD_PRIORITY_HIGHEST); infoPtr->validMask |= TCL_READABLE; } else { + infoPtr->readTI = NULL; infoPtr->readThread = 0; } if (writeFile != NULL) { @@ -1614,12 +1606,14 @@ TclpCreateCommandChannel( */ infoPtr->writable = CreateEvent(NULL, TRUE, TRUE, NULL); - infoPtr->startWriter = CreateEvent(NULL, FALSE, FALSE, NULL); - infoPtr->stopWriter = CreateEvent(NULL, TRUE, FALSE, NULL); infoPtr->writeThread = CreateThread(NULL, 256, PipeWriterThread, - infoPtr, 0, &id); + TclPipeThreadCreateTI(&infoPtr->writeTI, infoPtr, infoPtr->writable), + 0, NULL); SetThreadPriority(infoPtr->writeThread, THREAD_PRIORITY_HIGHEST); infoPtr->validMask |= TCL_WRITABLE; + } else { + infoPtr->writeTI = NULL; + infoPtr->writeThread = 0; } /* @@ -1805,12 +1799,12 @@ PipeClose2Proc( int errorCode, result; PipeInfo *infoPtr, **nextPtrPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); - DWORD exitCode; + int inExit = (TclInExit() || TclInThreadExit()); errorCode = 0; result = 0; - if ((!flags || flags == TCL_CLOSE_READ) && (pipePtr->readFile != NULL)) { + if ((!flags || flags & TCL_CLOSE_READ) && (pipePtr->readFile != NULL)) { /* * Clean up the background thread if necessary. Note that this must be * done before we can close the file, since the thread may be blocking @@ -1818,55 +1812,10 @@ PipeClose2Proc( */ if (pipePtr->readThread) { - /* - * The thread may already have closed on its own. Check its exit - * code. - */ - - GetExitCodeThread(pipePtr->readThread, &exitCode); - - if (exitCode == STILL_ACTIVE) { - /* - * Set the stop event so that if the reader thread is blocked - * in PipeReaderThread on WaitForMultipleEvents, it will exit - * cleanly. - */ - - SetEvent(pipePtr->stopReader); - - /* - * Wait at most 20 milliseconds for the reader thread to - * close. - */ - - if (WaitForSingleObject(pipePtr->readThread, - 20) == WAIT_TIMEOUT) { - /* - * The thread must be blocked waiting for the pipe to - * become readable in ReadFile(). There isn't a clean way - * to exit the thread from this condition. We should - * terminate the child process instead to get the reader - * thread to fall out of ReadFile with a FALSE. (below) is - * not the correct way to do this, but will stay here - * until a better solution is found. - * - * Note that we need to guard against terminating the - * thread while it is in the middle of Tcl_ThreadAlert - * because it won't be able to release the notifier lock. - */ - - Tcl_MutexLock(&pipeMutex); - - /* BUG: this leaks memory */ - TerminateThread(pipePtr->readThread, 0); - Tcl_MutexUnlock(&pipeMutex); - } - } + TclPipeThreadStop(&pipePtr->readTI, pipePtr->readThread); CloseHandle(pipePtr->readThread); CloseHandle(pipePtr->readable); - CloseHandle(pipePtr->startReader); - CloseHandle(pipePtr->stopReader); pipePtr->readThread = NULL; } if (TclpCloseFile(pipePtr->readFile) != 0) { @@ -1875,80 +1824,34 @@ PipeClose2Proc( pipePtr->validMask &= ~TCL_READABLE; pipePtr->readFile = NULL; } - if ((!flags || flags & TCL_CLOSE_WRITE) - && (pipePtr->writeFile != NULL)) { + if ((!flags || flags & TCL_CLOSE_WRITE) && (pipePtr->writeFile != NULL)) { if (pipePtr->writeThread) { + /* * Wait for the writer thread to finish the current buffer, then * terminate the thread and close the handles. If the channel is - * nonblocking but blocked during exit, bail out since the worker + * nonblocking or may block during exit, bail out since the worker * thread is not interruptible and we want TIP#398-fast-exit. */ - if (TclInExit() - && (pipePtr->flags & PIPE_ASYNC)) { + if ((pipePtr->flags & PIPE_ASYNC) && inExit) { /* give it a chance to leave honorably */ - SetEvent(pipePtr->stopWriter); + TclPipeThreadStopSignal(&pipePtr->writeTI, pipePtr->writable); - if (WaitForSingleObject(pipePtr->writable, 0) == WAIT_TIMEOUT) { + if (WaitForSingleObject(pipePtr->writable, 20) == WAIT_TIMEOUT) { return EWOULDBLOCK; } } else { - WaitForSingleObject(pipePtr->writable, INFINITE); + WaitForSingleObject(pipePtr->writable, inExit ? 5000 : INFINITE); } - /* - * The thread may already have closed on it's own. Check its exit - * code. - */ - - GetExitCodeThread(pipePtr->writeThread, &exitCode); + TclPipeThreadStop(&pipePtr->writeTI, pipePtr->writeThread); - if (exitCode == STILL_ACTIVE) { - /* - * Set the stop event so that if the reader thread is blocked - * in PipeReaderThread on WaitForMultipleEvents, it will exit - * cleanly. - */ - - SetEvent(pipePtr->stopWriter); - - /* - * Wait at most 20 milliseconds for the reader thread to - * close. - */ - - if (WaitForSingleObject(pipePtr->writeThread, - 20) == WAIT_TIMEOUT) { - /* - * The thread must be blocked waiting for the pipe to - * consume input in WriteFile(). There isn't a clean way - * to exit the thread from this condition. We should - * terminate the child process instead to get the writer - * thread to fall out of WriteFile with a FALSE. (below) - * is not the correct way to do this, but will stay here - * until a better solution is found. - * - * Note that we need to guard against terminating the - * thread while it is in the middle of Tcl_ThreadAlert - * because it won't be able to release the notifier lock. - */ - - Tcl_MutexLock(&pipeMutex); - - /* BUG: this leaks memory */ - TerminateThread(pipePtr->writeThread, 0); - Tcl_MutexUnlock(&pipeMutex); - } - } - - CloseHandle(pipePtr->writeThread); CloseHandle(pipePtr->writable); - CloseHandle(pipePtr->startWriter); - CloseHandle(pipePtr->stopWriter); + CloseHandle(pipePtr->writeThread); pipePtr->writeThread = NULL; } if (TclpCloseFile(pipePtr->writeFile) != 0) { @@ -1983,7 +1886,7 @@ PipeClose2Proc( } } - if ((pipePtr->flags & PIPE_ASYNC) || TclInExit()) { + if ((pipePtr->flags & PIPE_ASYNC) || inExit) { /* * If the channel is non-blocking or Tcl is being cleaned up, just * detach the children PIDs, reap them (important if we are in a @@ -2161,7 +2064,10 @@ PipeOutputProc( DWORD bytesWritten, timeout; *errorCode = 0; - timeout = (infoPtr->flags & PIPE_ASYNC) ? 0 : INFINITE; + + /* avoid blocking if pipe-thread exited */ + timeout = ((infoPtr->flags & PIPE_ASYNC) || !TclPipeThreadIsAlive(&infoPtr->writeTI) + || TclInExit() || TclInThreadExit()) ? 0 : INFINITE; if (WaitForSingleObject(infoPtr->writable, timeout) == WAIT_TIMEOUT) { /* * The writer thread is blocked waiting for a write to complete and @@ -2202,7 +2108,7 @@ PipeOutputProc( memcpy(infoPtr->writeBuf, buf, (size_t) toWrite); infoPtr->toWrite = toWrite; ResetEvent(infoPtr->writable); - SetEvent(infoPtr->startWriter); + TclPipeThreadSignal(&infoPtr->writeTI); bytesWritten = toWrite; } else { /* @@ -2712,7 +2618,9 @@ WaitForRead( * Synchronize with the reader thread. */ - timeout = blocking ? INFINITE : 0; + /* avoid blocking if pipe-thread exited */ + timeout = (!blocking || !TclPipeThreadIsAlive(&infoPtr->readTI) + || TclInExit() || TclInThreadExit()) ? 0 : INFINITE; if (WaitForSingleObject(infoPtr->readable, timeout) == WAIT_TIMEOUT) { /* * The reader thread is blocked waiting for data and the channel @@ -2786,7 +2694,7 @@ WaitForRead( */ ResetEvent(infoPtr->readable); - SetEvent(infoPtr->startReader); + TclPipeThreadSignal(&infoPtr->readTI); } } @@ -2814,33 +2722,27 @@ static DWORD WINAPI PipeReaderThread( LPVOID arg) { - PipeInfo *infoPtr = (PipeInfo *)arg; - HANDLE *handle = ((WinFile *) infoPtr->readFile)->handle; + TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg; + PipeInfo *infoPtr = NULL; /* access info only after success init/wait */ + HANDLE handle = NULL; DWORD count, err; int done = 0; - HANDLE wEvents[2]; - DWORD waitResult; - - wEvents[0] = infoPtr->stopReader; - wEvents[1] = infoPtr->startReader; while (!done) { /* * Wait for the main thread to signal before attempting to wait on the * pipe becoming readable. */ - - waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE); - - if (waitResult != (WAIT_OBJECT_0 + 1)) { - /* - * The start event was not signaled. It might be the stop event or - * an error, so exit. - */ - + if (!TclPipeThreadWaitForSignal(&pipeTI)) { + /* exit */ break; } + if (!infoPtr) { + infoPtr = (PipeInfo *)pipeTI->clientData; + handle = ((WinFile *) infoPtr->readFile)->handle; + } + /* * Try waiting for 0 bytes. This will block until some data is * available on NT, but will return immediately on Win 95. So, if no @@ -2860,7 +2762,7 @@ PipeReaderThread( infoPtr->readFlags |= PIPE_EOF; done = 1; } else if (err == ERROR_INVALID_HANDLE) { - break; + done = 1; } } else if (count == 0) { if (ReadFile(handle, &(infoPtr->extraByte), 1, &count, NULL) @@ -2882,12 +2784,11 @@ PipeReaderThread( infoPtr->readFlags |= PIPE_EOF; done = 1; } else if (err == ERROR_INVALID_HANDLE) { - break; + done = 1; } } } - /* * Signal the main thread by signalling the readable event and then * waking up the notifier thread. @@ -2913,6 +2814,12 @@ PipeReaderThread( Tcl_MutexUnlock(&pipeMutex); } + /* + * If state of thread was set to stop, we can sane free info structure, + * otherwise it is shared with main thread, so main thread will own it + */ + TclPipeThreadExit(&pipeTI); + return 0; } @@ -2937,37 +2844,27 @@ static DWORD WINAPI PipeWriterThread( LPVOID arg) { - PipeInfo *infoPtr = (PipeInfo *)arg; - HANDLE *handle = ((WinFile *) infoPtr->writeFile)->handle; + TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg; + PipeInfo *infoPtr = NULL; /* access info only after success init/wait */ + HANDLE handle = NULL; DWORD count, toWrite; char *buf; int done = 0; - HANDLE wEvents[2]; - DWORD waitResult; - - wEvents[0] = infoPtr->stopWriter; - wEvents[1] = infoPtr->startWriter; while (!done) { /* * Wait for the main thread to signal before attempting to write. */ - - waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE); - - if (waitResult != (WAIT_OBJECT_0 + 1)) { - /* - * The start event was not signaled. It might be the stop event or - * an error, so exit. - */ - - if (waitResult == WAIT_OBJECT_0) { - SetEvent(infoPtr->writable); - } - + if (!TclPipeThreadWaitForSignal(&pipeTI)) { + /* exit */ break; } + if (!infoPtr) { + infoPtr = (PipeInfo *)pipeTI->clientData; + handle = ((WinFile *) infoPtr->writeFile)->handle; + } + buf = infoPtr->writeBuf; toWrite = infoPtr->toWrite; @@ -3011,6 +2908,12 @@ PipeWriterThread( Tcl_MutexUnlock(&pipeMutex); } + /* + * If state of thread was set to stop, we can sane free info structure, + * otherwise it is shared with main thread, so main thread will own it. + */ + TclPipeThreadExit(&pipeTI); + return 0; } @@ -3159,6 +3062,396 @@ TclpOpenTemporaryFile( } /* + *---------------------------------------------------------------------- + * + * TclPipeThreadCreateTI -- + * + * Creates a thread info structure, can be owned by worker. + * + * Results: + * Pointer to created TI structure. + * + *---------------------------------------------------------------------- + */ + +TclPipeThreadInfo * +TclPipeThreadCreateTI( + TclPipeThreadInfo **pipeTIPtr, + ClientData clientData, + HANDLE wakeEvent) +{ + TclPipeThreadInfo *pipeTI; +#ifndef _PTI_USE_CKALLOC + pipeTI = malloc(sizeof(TclPipeThreadInfo)); +#else + pipeTI = ckalloc(sizeof(TclPipeThreadInfo)); +#endif + pipeTI->evControl = CreateEvent(NULL, FALSE, FALSE, NULL); + pipeTI->state = PTI_STATE_IDLE; + pipeTI->clientData = clientData; + pipeTI->evWakeUp = wakeEvent; + return (*pipeTIPtr = pipeTI); +} + +/* + *---------------------------------------------------------------------- + * + * TclPipeThreadWaitForSignal -- + * + * Wait for work/stop signals inside pipe worker. + * + * Results: + * 1 if signaled to work, 0 if signaled to stop. + * + * Side effects: + * If this function returns 0, TI-structure pointer given via pipeTIPtr + * may be NULL, so not accessible (can be owned by main thread). + * + *---------------------------------------------------------------------- + */ + +int +TclPipeThreadWaitForSignal( + TclPipeThreadInfo **pipeTIPtr) +{ + TclPipeThreadInfo *pipeTI = *pipeTIPtr; + LONG state; + DWORD waitResult; + HANDLE wakeEvent; + + if (!pipeTI) { + return 0; + } + + wakeEvent = pipeTI->evWakeUp; + /* + * Wait for the main thread to signal before attempting to do the work. + */ + + /* reset work state of thread (idle/waiting) */ + if ((state = InterlockedCompareExchange(&pipeTI->state, + PTI_STATE_IDLE, PTI_STATE_WORK)) & (PTI_STATE_STOP|PTI_STATE_END)) { + /* end of work, check the owner of structure */ + goto end; + } + /* entering wait */ + waitResult = WaitForSingleObject(pipeTI->evControl, INFINITE); + + if (waitResult != WAIT_OBJECT_0) { + + /* + * The control event was not signaled, so end of work (unexpected + * behaviour, main thread can be dead?). + */ + goto end; + } + + /* try to set work state of thread */ + if ((state = InterlockedCompareExchange(&pipeTI->state, + PTI_STATE_WORK, PTI_STATE_IDLE)) & (PTI_STATE_STOP|PTI_STATE_END)) { + /* end of work */ + goto end; + } + + /* signaled to work */ + return 1; + +end: + /* end of work, check the owner of the TI structure */ + if (state != PTI_STATE_STOP) { + *pipeTIPtr = NULL; + } else { + pipeTI->evWakeUp = NULL; + } + if (wakeEvent) { + SetEvent(wakeEvent); + } + return 0; +} + +/* + *---------------------------------------------------------------------- + * + * TclPipeThreadStopSignal -- + * + * Send stop signal to the pipe worker (without waiting). + * + * After calling of this function, TI-structure pointer given via pipeTIPtr + * may be NULL. + * + * Results: + * 1 if signaled (or pipe-thread is down), 0 if pipe thread still working. + * + *---------------------------------------------------------------------- + */ + +int +TclPipeThreadStopSignal( + TclPipeThreadInfo **pipeTIPtr, HANDLE wakeEvent) +{ + TclPipeThreadInfo *pipeTI = *pipeTIPtr; + HANDLE evControl; + int state; + + if (!pipeTI) { + return 1; + } + evControl = pipeTI->evControl; + pipeTI->evWakeUp = wakeEvent; + switch ( + (state = InterlockedCompareExchange(&pipeTI->state, + PTI_STATE_STOP, PTI_STATE_IDLE)) + ) { + + case PTI_STATE_IDLE: + + /* Thread was idle/waiting, notify it goes teardown */ + SetEvent(evControl); + + *pipeTIPtr = NULL; + + case PTI_STATE_DOWN: + + return 1; + + default: + /* + * Thread works currently, we should try to end it, own the TI structure + * (because of possible sharing the joint structures with thread) + */ + InterlockedExchange(&pipeTI->state, PTI_STATE_END); + break; + } + + return 0; +} + +/* + *---------------------------------------------------------------------- + * + * TclPipeThreadStop -- + * + * Send stop signal to the pipe worker and wait for thread completion. + * + * May be combined with TclPipeThreadStopSignal. + * + * After calling of this function, TI-structure pointer given via pipeTIPtr + * is not accessible (owned by pipe worker or released here). + * + * Results: + * None. + * + * Side effects: + * Can terminate pipe worker (and / or stop its synchronous operations). + * + *---------------------------------------------------------------------- + */ + +void +TclPipeThreadStop( + TclPipeThreadInfo **pipeTIPtr, + HANDLE hThread) +{ + TclPipeThreadInfo *pipeTI = *pipeTIPtr; + HANDLE evControl, wakeEvent; + int state; + + if (!pipeTI) { + return; + } + pipeTI = *pipeTIPtr; + evControl = pipeTI->evControl; + wakeEvent = pipeTI->evWakeUp; + pipeTI->evWakeUp = NULL; + /* + * Try to sane stop the pipe worker, corresponding its current state + */ + switch ( + (state = InterlockedCompareExchange(&pipeTI->state, + PTI_STATE_STOP, PTI_STATE_IDLE)) + ) { + + case PTI_STATE_IDLE: + + /* Thread was idle/waiting, notify it goes teardown */ + SetEvent(evControl); + + /* we don't need to wait for it at all, thread frees himself (owns the TI structure) */ + pipeTI = NULL; + break; + + case PTI_STATE_STOP: + /* already stopped, thread frees himself (owns the TI structure) */ + pipeTI = NULL; + break; + case PTI_STATE_DOWN: + /* Thread already down (?), do nothing */ + + /* we don't need to wait for it, but we should free pipeTI */ + hThread = NULL; + break; + + /* case PTI_STATE_WORK: */ + default: + /* + * Thread works currently, we should try to end it, own the TI structure + * (because of possible sharing the joint structures with thread) + */ + if ((state = InterlockedCompareExchange(&pipeTI->state, + PTI_STATE_END, PTI_STATE_WORK)) == PTI_STATE_DOWN + ) { + /* we don't need to wait for it, but we should free pipeTI */ + hThread = NULL; + }; + break; + } + + if (pipeTI && hThread) { + DWORD exitCode; + + /* + * The thread may already have closed on its own. Check its exit + * code. + */ + + GetExitCodeThread(hThread, &exitCode); + + if (exitCode == STILL_ACTIVE) { + + int inExit = (TclInExit() || TclInThreadExit()); + /* + * Set the stop event so that if the pipe thread is blocked + * somewhere, it may hereafter sane exit cleanly. + */ + + SetEvent(evControl); + + /* + * Cancel all sync-IO of this thread (may be blocked there). + */ + if (tclWinProcs->cancelSynchronousIo) { + tclWinProcs->cancelSynchronousIo(hThread); + } + + /* + * Wait at most 20 milliseconds for the reader thread to + * close (regarding TIP#398-fast-exit). + */ + + /* if we want TIP#398-fast-exit. */ + if (WaitForSingleObject(hThread, inExit ? 0 : 20) == WAIT_TIMEOUT) { + + /* + * The thread must be blocked waiting for the pipe to + * become readable in ReadFile(). There isn't a clean way + * to exit the thread from this condition. We should + * terminate the child process instead to get the reader + * thread to fall out of ReadFile with a FALSE. (below) is + * not the correct way to do this, but will stay here + * until a better solution is found. + * + * Note that we need to guard against terminating the + * thread while it is in the middle of Tcl_ThreadAlert + * because it won't be able to release the notifier lock. + * + * Also note that terminating threads during their initialization or teardown phase + * may result in ntdll.dll's LoaderLock to remain locked indefinitely. + * This causes ntdll.dll's LdrpInitializeThread() to deadlock trying to acquire LoaderLock. + * LdrpInitializeThread() is executed within new threads to perform + * initialization and to execute DllMain() of all loaded dlls. + * As a result, all new threads are deadlocked in their initialization phase and never execute, + * even though CreateThread() reports successful thread creation. + * This results in a very weird process-wide behavior, which is extremely hard to debug. + * + * THREADS SHOULD NEVER BE TERMINATED. Period. + * + * But for now, check if thread is exiting, and if so, let it die peacefully. + * + * Also don't terminate if in exit (otherwise deadlocked in ntdll.dll's). + */ + + if ( pipeTI->state != PTI_STATE_DOWN + && WaitForSingleObject(hThread, + inExit ? 50 : 5000) != WAIT_OBJECT_0 + ) { + /* BUG: this leaks memory */ + if (inExit || !TerminateThread(hThread, 0)) { + /* in exit or terminate fails, just give thread a chance to exit */ + if (InterlockedExchange(&pipeTI->state, + PTI_STATE_STOP) != PTI_STATE_DOWN) { + pipeTI = NULL; + } + }; + } + } + } + } + + *pipeTIPtr = NULL; + if (pipeTI) { + if (pipeTI->evWakeUp) { + SetEvent(pipeTI->evWakeUp); + } + CloseHandle(pipeTI->evControl); + #ifndef _PTI_USE_CKALLOC + free(pipeTI); + #else + ckfree(pipeTI); + #endif + } +} + +/* + *---------------------------------------------------------------------- + * + * TclPipeThreadExit -- + * + * Clean-up for the pipe thread (removes owned TI-structure in worker). + * + * Should be executed on worker exit, to inform the main thread or + * free TI-structure (if owned). + * + * After calling of this function, TI-structure pointer given via pipeTIPtr + * is not accessible (owned by main thread or released here). + * + * Results: + * None. + * + *---------------------------------------------------------------------- + */ + +void +TclPipeThreadExit( + TclPipeThreadInfo **pipeTIPtr) +{ + LONG state; + TclPipeThreadInfo *pipeTI = *pipeTIPtr; + /* + * If state of thread was set to stop (exactly), we can sane free its info + * structure, otherwise it is shared with main thread, so main thread will + * own it. + */ + if (!pipeTI) { + return; + } + *pipeTIPtr = NULL; + if ((state = InterlockedExchange(&pipeTI->state, + PTI_STATE_DOWN)) == PTI_STATE_STOP) { + CloseHandle(pipeTI->evControl); + if (pipeTI->evWakeUp) { + SetEvent(pipeTI->evWakeUp); + } + #ifndef _PTI_USE_CKALLOC + free(pipeTI); + #else + ckfree(pipeTI); + /* be sure all subsystems used are finalized */ + Tcl_FinalizeThread(); + #endif + } +} + +/* * Local Variables: * mode: c * c-basic-offset: 4 diff --git a/win/tclWinSerial.c b/win/tclWinSerial.c index 0730a46..fe416ff 100644 --- a/win/tclWinSerial.c +++ b/win/tclWinSerial.c @@ -93,17 +93,12 @@ typedef struct SerialInfo { * threads. */ OVERLAPPED osRead; /* OVERLAPPED structure for read operations. */ OVERLAPPED osWrite; /* OVERLAPPED structure for write operations */ + TclPipeThreadInfo *writeTI; /* Thread info structure of writer worker. */ HANDLE writeThread; /* Handle to writer thread. */ CRITICAL_SECTION csWrite; /* Writer thread synchronisation. */ HANDLE evWritable; /* Manual-reset event to signal when the * writer thread has finished waiting for the * current buffer to be written. */ - HANDLE evStartWriter; /* Auto-reset event used by the main thread to - * signal when the writer thread should - * attempt to write to the serial. */ - HANDLE evStopWriter; /* Auto-reset event used by the main thread to - * signal when the writer thread should close. - */ DWORD writeError; /* An error caused by the last background * write. Set to 0 if no error has been * detected. This word is shared with the @@ -599,7 +594,6 @@ SerialCloseProc( int errorCode, result = 0; SerialInfo *infoPtr, **nextPtrPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); - DWORD exitCode; errorCode = 0; @@ -609,56 +603,13 @@ SerialCloseProc( } serialPtr->validMask &= ~TCL_READABLE; - if (serialPtr->validMask & TCL_WRITABLE) { - /* - * Generally we cannot wait for a pending write operation because it - * may hang due to handshake - * WaitForSingleObject(serialPtr->evWritable, INFINITE); - */ - - /* - * The thread may have already closed on it's own. Check it's exit - * code. - */ - - GetExitCodeThread(serialPtr->writeThread, &exitCode); - - if (exitCode == STILL_ACTIVE) { - /* - * Set the stop event so that if the writer thread is blocked in - * SerialWriterThread on WaitForMultipleEvents, it will exit - * cleanly. - */ - - SetEvent(serialPtr->evStopWriter); - - /* - * Wait at most 20 milliseconds for the writer thread to close. - */ - - if (WaitForSingleObject(serialPtr->writeThread, - 20) == WAIT_TIMEOUT) { - /* - * Forcibly terminate the background thread as a last resort. - * Note that we need to guard against terminating the thread - * while it is in the middle of Tcl_ThreadAlert because it - * won't be able to release the notifier lock. - */ + if (serialPtr->writeThread) { - Tcl_MutexLock(&serialMutex); + TclPipeThreadStop(&serialPtr->writeTI, serialPtr->writeThread); - /* BUG: this leaks memory */ - TerminateThread(serialPtr->writeThread, 0); - - Tcl_MutexUnlock(&serialMutex); - } - } - - CloseHandle(serialPtr->writeThread); CloseHandle(serialPtr->osWrite.hEvent); CloseHandle(serialPtr->evWritable); - CloseHandle(serialPtr->evStartWriter); - CloseHandle(serialPtr->evStopWriter); + CloseHandle(serialPtr->writeThread); serialPtr->writeThread = NULL; PurgeComm(serialPtr->handle, PURGE_TXABORT | PURGE_TXCLEAR); @@ -1076,7 +1027,7 @@ SerialOutputProc( memcpy(infoPtr->writeBuf, buf, (size_t) toWrite); infoPtr->toWrite = toWrite; ResetEvent(infoPtr->evWritable); - SetEvent(infoPtr->evStartWriter); + TclPipeThreadSignal(&infoPtr->writeTI); bytesWritten = (DWORD) toWrite; } else { @@ -1313,34 +1264,21 @@ static DWORD WINAPI SerialWriterThread( LPVOID arg) { - SerialInfo *infoPtr = (SerialInfo *)arg; - DWORD bytesWritten, toWrite, waitResult; + TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg; + SerialInfo *infoPtr = NULL; /* access info only after success init/wait */ + DWORD bytesWritten, toWrite; char *buf; OVERLAPPED myWrite; /* Have an own OVERLAPPED in this thread. */ - HANDLE wEvents[2]; - - /* - * The stop event takes precedence by being first in the list. - */ - - wEvents[0] = infoPtr->evStopWriter; - wEvents[1] = infoPtr->evStartWriter; for (;;) { /* * Wait for the main thread to signal before attempting to write. */ - - waitResult = WaitForMultipleObjects(2, wEvents, FALSE, INFINITE); - - if (waitResult != (WAIT_OBJECT_0 + 1)) { - /* - * The start event was not signaled. It might be the stop event or - * an error, so exit. - */ - + if (!TclPipeThreadWaitForSignal(&pipeTI)) { + /* exit */ break; } + infoPtr = (SerialInfo *)pipeTI->clientData; buf = infoPtr->writeBuf; toWrite = infoPtr->toWrite; @@ -1404,6 +1342,9 @@ SerialWriterThread( Tcl_MutexUnlock(&serialMutex); } + /* Worker exit, so inform the main thread or free TI-structure (if owned) */ + TclPipeThreadExit(&pipeTI); + return 0; } @@ -1477,7 +1418,6 @@ TclWinOpenSerialChannel( int permissions) { SerialInfo *infoPtr; - DWORD id; SerialInit(); @@ -1529,10 +1469,9 @@ TclWinOpenSerialChannel( infoPtr->osWrite.hEvent = CreateEvent(NULL, TRUE, FALSE, NULL); infoPtr->evWritable = CreateEvent(NULL, TRUE, TRUE, NULL); - infoPtr->evStartWriter = CreateEvent(NULL, FALSE, FALSE, NULL); - infoPtr->evStopWriter = CreateEvent(NULL, FALSE, FALSE, NULL); infoPtr->writeThread = CreateThread(NULL, 256, SerialWriterThread, - infoPtr, 0, &id); + TclPipeThreadCreateTI(&infoPtr->writeTI, infoPtr, + infoPtr->evWritable), 0, NULL); } /* |