summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--ChangeLog7
-rw-r--r--library/http/http.tcl316
-rw-r--r--library/http/pkgIndex.tcl2
-rw-r--r--unix/Makefile.in6
-rw-r--r--win/Makefile.in6
5 files changed, 192 insertions, 145 deletions
diff --git a/ChangeLog b/ChangeLog
index c9d4f63..1cc7b85 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,10 @@
+2009-04-09 Don Porter <dgp@users.sourceforge.net>
+
+ * library/http/http.tcl: Backport http 2.7.3 from HEAD for
+ * library/http/pkgIndex.tcl: bundling with the Tcl 8.5.7 release.
+ * unix/Makefile.in:
+ * win/Makefile.in:
+
2009-04-08 Andreas Kupries <andreask@activestate.com>
* library/platform/platform.tcl: Extended the darwin sections to
diff --git a/library/http/http.tcl b/library/http/http.tcl
index 06829cd..5dbce3c 100644
--- a/library/http/http.tcl
+++ b/library/http/http.tcl
@@ -1,19 +1,19 @@
# http.tcl --
#
# Client-side HTTP for GET, POST, and HEAD commands. These routines can
-# be used in untrusted code that uses the Safesock security policy. These
-# procedures use a callback interface to avoid using vwait, which is not
-# defined in the safe base.
+# be used in untrusted code that uses the Safesock security policy.
+# These procedures use a callback interface to avoid using vwait, which
+# is not defined in the safe base.
#
# See the file "license.terms" for information on usage and redistribution of
# this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
-# RCS: @(#) $Id: http.tcl,v 1.67.2.5 2008/10/23 23:34:32 patthoyts Exp $
+# RCS: @(#) $Id: http.tcl,v 1.67.2.6 2009/04/09 17:05:39 dgp Exp $
package require Tcl 8.4
-# Keep this in sync with pkgIndex.tcl and with the install directories
-# in Makefiles
-package provide http 2.7.2
+# Keep this in sync with pkgIndex.tcl and with the install directories in
+# Makefiles
+package provide http 2.7.3
namespace eval http {
# Allow resourcing to not clobber existing data
@@ -32,9 +32,9 @@ namespace eval http {
proc init {} {
# Set up the map for quoting chars. RFC3986 Section 2.3 say percent
- # encode all except: "... percent-encoded octets in the ranges of ALPHA
- # (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period (%2E),
- # underscore (%5F), or tilde (%7E) should not be created by URI
+ # encode all except: "... percent-encoded octets in the ranges of
+ # ALPHA (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period
+ # (%2E), underscore (%5F), or tilde (%7E) should not be created by URI
# producers ..."
for {set i 0} {$i <= 256} {incr i} {
set c [format %c $i]
@@ -101,9 +101,9 @@ proc http::Log {args} {}
# See documentation for details.
#
# Arguments:
-# proto URL protocol prefix, e.g. https
-# port Default port for protocol
-# command Command to use to create socket
+# proto URL protocol prefix, e.g. https
+# port Default port for protocol
+# command Command to use to create socket
# Results:
# list of port and command that was registered.
@@ -117,7 +117,7 @@ proc http::register {proto port command} {
# Unregisters URL protocol handler
#
# Arguments:
-# proto URL protocol prefix, e.g. https
+# proto URL protocol prefix, e.g. https
# Results:
# list of port and command that was unregistered.
@@ -152,21 +152,19 @@ proc http::config {args} {
return $result
}
set options [string map {- ""} $options]
- set pat ^-([join $options |])$
+ set pat ^-(?:[join $options |])$
if {[llength $args] == 1} {
set flag [lindex $args 0]
- if {[regexp -- $pat $flag]} {
- return $http($flag)
- } else {
+ if {![regexp -- $pat $flag]} {
return -code error "Unknown option $flag, must be: $usage"
}
+ return $http($flag)
} else {
foreach {flag value} $args {
- if {[regexp -- $pat $flag]} {
- set http($flag) $value
- } else {
+ if {![regexp -- $pat $flag]} {
return -code error "Unknown option $flag, must be: $usage"
}
+ set http($flag) $value
}
}
}
@@ -179,14 +177,14 @@ proc http::config {args} {
# token Connection token.
# errormsg (optional) If set, forces status to error.
# skipCB (optional) If set, don't call the -command callback. This
-# is useful when geturl wants to throw an exception instead
-# of calling the callback. That way, the same error isn't
-# reported to two places.
+# is useful when geturl wants to throw an exception instead
+# of calling the callback. That way, the same error isn't
+# reported to two places.
#
# Side Effects:
# Closes the socket
-proc http::Finish { token {errormsg ""} {skipCB 0}} {
+proc http::Finish {token {errormsg ""} {skipCB 0}} {
variable $token
upvar 0 $token state
global errorInfo errorCode
@@ -194,12 +192,15 @@ proc http::Finish { token {errormsg ""} {skipCB 0}} {
set state(error) [list $errormsg $errorInfo $errorCode]
set state(status) "error"
}
- if {($state(status) eq "timeout") || ($state(status) eq "error")
- || ([info exists state(connection)] && ($state(connection) eq "close"))
- } {
+ if {
+ ($state(status) eq "timeout") || ($state(status) eq "error") ||
+ ([info exists state(connection)] && ($state(connection) eq "close"))
+ } then {
CloseSocket $state(sock) $token
}
- if {[info exists state(after)]} { after cancel $state(after) }
+ if {[info exists state(after)]} {
+ after cancel $state(after)
+ }
if {[info exists state(-command)] && !$skipCB} {
if {[catch {eval $state(-command) {$token}} err]} {
if {$errormsg eq ""} {
@@ -214,10 +215,10 @@ proc http::Finish { token {errormsg ""} {skipCB 0}} {
# http::CloseSocket -
#
-# Close a socket and remove it from the persistent sockets table.
-# If possible an http token is included here but when we are called
-# from a fileevent on remote closure we need to find the correct
-# entry - hence the second section.
+# Close a socket and remove it from the persistent sockets table. If
+# possible an http token is included here but when we are called from a
+# fileevent on remote closure we need to find the correct entry - hence
+# the second section.
proc ::http::CloseSocket {s {token {}}} {
variable socketmap
@@ -227,23 +228,27 @@ proc ::http::CloseSocket {s {token {}}} {
variable $token
upvar 0 $token state
if {[info exists state(socketinfo)]} {
- set conn_id $state(socketinfo)
+ set conn_id $state(socketinfo)
}
} else {
set map [array get socketmap]
set ndx [lsearch -exact $map $s]
if {$ndx != -1} {
- incr ndx -1
- set conn_id [lindex $map $ndx]
+ incr ndx -1
+ set conn_id [lindex $map $ndx]
}
}
if {$conn_id eq {} || ![info exists socketmap($conn_id)]} {
Log "Closing socket $s (no connection info)"
- if {[catch {close $s} err]} { Log "Error: $err" }
+ if {[catch {close $s} err]} {
+ Log "Error: $err"
+ }
} else {
if {[info exists socketmap($conn_id)]} {
Log "Closing connection $conn_id (sock $socketmap($conn_id))"
- if {[catch {close $socketmap($conn_id)} err]} { Log "Error: $err" }
+ if {[catch {close $socketmap($conn_id)} err]} {
+ Log "Error: $err"
+ }
unset socketmap($conn_id)
} else {
Log "Cannot close connection $conn_id - no socket in socket map"
@@ -262,7 +267,7 @@ proc ::http::CloseSocket {s {token {}}} {
# Side Effects:
# See Finish
-proc http::reset { token {why reset} } {
+proc http::reset {token {why reset}} {
variable $token
upvar 0 $token state
set state(status) $why
@@ -285,10 +290,10 @@ proc http::reset { token {why reset} } {
# args Option value pairs. Valid options include:
# -blocksize, -validate, -headers, -timeout
# Results:
-# Returns a token for this connection. This token is the name of an array
-# that the caller should unset to garbage collect the state.
+# Returns a token for this connection. This token is the name of an
+# array that the caller should unset to garbage collect the state.
-proc http::geturl { url args } {
+proc http::geturl {url args} {
variable http
variable urlTypes
variable defaultCharset
@@ -351,14 +356,17 @@ proc http::geturl { url args } {
}
set usage [join [lsort $options] ", "]
set options [string map {- ""} $options]
- set pat ^-([join $options |])$
+ set pat ^-(?:[join $options |])$
foreach {flag value} $args {
if {[regexp -- $pat $flag]} {
# Validate numbers
- if {[info exists type($flag)] &&
- ![string is $type($flag) -strict $value]} {
+ if {
+ [info exists type($flag)] &&
+ ![string is $type($flag) -strict $value]
+ } then {
unset $token
- return -code error "Bad value for $flag ($value), must be $type($flag)"
+ return -code error \
+ "Bad value for $flag ($value), must be $type($flag)"
}
set state($flag) $value
} else {
@@ -397,7 +405,9 @@ proc http::geturl { url args } {
# pass it in here, but it's cheap to strip).
#
# An example of a URL that has all the parts:
- # http://jschmoe:xyzzy@www.bogus.net:8000/foo/bar.tml?q=foo#changes
+ #
+ # http://jschmoe:xyzzy@www.bogus.net:8000/foo/bar.tml?q=foo#changes
+ #
# The "http" is the protocol, the user is "jschmoe", the password is
# "xyzzy", the host is "www.bogus.net", the port is "8000", the path is
# "/foo/bar.tml", the query is "q=foo", and the fragment is "changes".
@@ -408,9 +418,8 @@ proc http::geturl { url args } {
# Also note that we do not currently support IPv6 addresses.
#
# From a validation perspective, we need to ensure that the parts of the
- # URL that are going to the server are correctly encoded.
- # This is only done if $state(-strict) is true (inherited from
- # $::http::strict).
+ # URL that are going to the server are correctly encoded. This is only
+ # done if $state(-strict) is true (inherited from $::http::strict).
set URLmatcher {(?x) # this is _expanded_ syntax
^
@@ -481,7 +490,7 @@ proc http::geturl { url args } {
# Provide a better error message in this error case
if {[regexp {(?i)%(?![0-9a-f][0-9a-f])..} $srvurl bad]} {
return -code error \
- "Illegal encoding character usage \"$bad\" in URL path"
+ "Illegal encoding character usage \"$bad\" in URL path"
}
return -code error "Illegal characters in URL path"
}
@@ -565,15 +574,15 @@ proc http::geturl { url args } {
lappend sockopts -myaddr $state(-myaddr)
}
if {[catch {eval $defcmd $sockopts $targetAddr} sock]} {
- # something went wrong while trying to establish the
- # connection. Clean up after events and such, but DON'T call the
- # command callback (if available) because we're going to throw an
- # exception from here instead.
+ # something went wrong while trying to establish the connection.
+ # Clean up after events and such, but DON'T call the command
+ # callback (if available) because we're going to throw an
+ # exception from here instead.
set state(sock) $sock
- Finish $token "" 1
- cleanup $token
- return -code error $sock
+ Finish $token "" 1
+ cleanup $token
+ return -code error $sock
}
}
set state(sock) $sock
@@ -591,8 +600,8 @@ proc http::geturl { url args } {
if {![info exists state]} {
# If we timed out then Finish has been called and the users
- # command callback may have cleaned up the token. If so
- # we end up here with nothing left to do.
+ # command callback may have cleaned up the token. If so we end up
+ # here with nothing left to do.
return $token
} elseif {$state(status) eq "error"} {
# Something went wrong while trying to establish the connection.
@@ -646,11 +655,11 @@ proc http::geturl { url args } {
puts $sock "Accept: $http(-accept)"
array set hdrs $state(-headers)
if {[info exists hdrs(Host)]} {
- # Allow Host spoofing [Bug 928154]
+ # Allow Host spoofing. [Bug 928154]
puts $sock "Host: $hdrs(Host)"
} elseif {$port == $defport} {
- # Don't add port in this case, to handle broken servers.
- # [Bug #504508]
+ # Don't add port in this case, to handle broken servers. [Bug
+ # #504508]
puts $sock "Host: $host"
} else {
puts $sock "Host: $host:$port"
@@ -658,20 +667,22 @@ proc http::geturl { url args } {
unset hdrs
puts $sock "User-Agent: $http(-useragent)"
if {$state(-protocol) == 1.0 && $state(-keepalive)} {
- puts $sock "Connection: keep-alive"
+ puts $sock "Connection: keep-alive"
}
if {$state(-protocol) > 1.0 && !$state(-keepalive)} {
- puts $sock "Connection: close" ;# RFC2616 sec 8.1.2.1
+ puts $sock "Connection: close" ;# RFC2616 sec 8.1.2.1
}
if {[info exists phost] && ($phost ne "") && $state(-keepalive)} {
- puts $sock "Proxy-Connection: Keep-Alive"
+ puts $sock "Proxy-Connection: Keep-Alive"
}
set accept_encoding_seen 0
foreach {key value} $state(-headers) {
- if {[string equal -nocase $key "host"]} { continue }
- if {[string equal -nocase $key "accept-encoding"]} {
- set accept_encoding_seen 1
- }
+ if {[string equal -nocase $key "host"]} {
+ continue
+ }
+ if {[string equal -nocase $key "accept-encoding"]} {
+ set accept_encoding_seen 1
+ }
set value [string map [list \n "" \r ""] $value]
set key [string trim $key]
if {[string equal -nocase $key "content-length"]} {
@@ -683,10 +694,13 @@ proc http::geturl { url args } {
}
}
# Soft zlib dependency check - no package require
- if {!$accept_encoding_seen && [llength [package provide zlib]]
- && !([info exists state(-channel)] || [info exists state(-handler)])
- } {
- puts $sock "Accept-Encoding: gzip, identity, *;q=0.1"
+ if {
+ !$accept_encoding_seen &&
+ ([package vsatisfies [package provide Tcl] 8.6]
+ || [llength [package provide zlib]]) &&
+ !([info exists state(-channel)] || [info exists state(-handler)])
+ } then {
+ puts $sock "Accept-Encoding: gzip, identity, *;q=0.1"
}
if {$isQueryChannel && $state(querylength) == 0} {
# Try to determine size of data in channel. If we cannot seek, the
@@ -707,13 +721,14 @@ proc http::geturl { url args } {
# It is possible to have both the read and write fileevents active at
# this point. The only scenario it seems to affect is a server that
# closes the connection without reading the POST data. (e.g., early
- # versions TclHttpd in various error cases). Depending on the platform,
- # the client may or may not be able to get the response from the server
- # because of the error it will get trying to write the post data.
- # Having both fileevents active changes the timing and the behavior,
- # but no two platforms (among Solaris, Linux, and NT) behave the same,
- # and none behave all that well in any case. Servers should always read
- # their POST data if they expect the client to read their response.
+ # versions TclHttpd in various error cases). Depending on the
+ # platform, the client may or may not be able to get the response from
+ # the server because of the error it will get trying to write the post
+ # data. Having both fileevents active changes the timing and the
+ # behavior, but no two platforms (among Solaris, Linux, and NT) behave
+ # the same, and none behave all that well in any case. Servers should
+ # always read their POST data if they expect the client to read their
+ # response.
if {$isQuery || $isQueryChannel} {
puts $sock "Content-Type: $state(-type)"
@@ -729,7 +744,7 @@ proc http::geturl { url args } {
fileevent $sock readable [list http::Event $sock $token]
}
- if {! [info exists state(-command)]} {
+ if {![info exists state(-command)]} {
# geturl does EVERYTHING asynchronously, so if the user calls it
# synchronously, we just do a wait here.
@@ -740,7 +755,7 @@ proc http::geturl { url args } {
return -code error [lindex $state(error) 0]
}
}
- } err]} {
+ } err]} then {
# The socket probably was never connected, or the connection dropped
# later.
@@ -772,7 +787,9 @@ proc http::data {token} {
return $state(body)
}
proc http::status {token} {
- if {![info exists $token]} { return "error" }
+ if {![info exists $token]} {
+ return "error"
+ }
variable $token
upvar 0 $token state
return $state(status)
@@ -843,9 +860,11 @@ proc http::Connect {token} {
variable $token
upvar 0 $token state
global errorInfo errorCode
- if {[eof $state(sock)] ||
- [string length [fconfigure $state(sock) -error]]} {
- Finish $token "connect failed [fconfigure $state(sock) -error]" 1
+ if {
+ [eof $state(sock)] ||
+ [string length [fconfigure $state(sock) -error]]
+ } then {
+ Finish $token "connect failed [fconfigure $state(sock) -error]" 1
} else {
set state(status) connect
fileevent $state(sock) writable {}
@@ -896,7 +915,7 @@ proc http::Write {token} {
set done 1
}
}
- } err]} {
+ } err]} then {
# Do not call Finish here, but instead let the read half of the socket
# process whatever server reply there is to get.
@@ -934,8 +953,8 @@ proc http::Event {sock token} {
if {![info exists state]} {
Log "Event $sock with invalid token '$token' - remote close?"
- if {! [eof $sock]} {
- if {[string length [set d [read $sock]]] != 0} {
+ if {![eof $sock]} {
+ if {[set d [read $sock]] ne ""} {
Log "WARNING: additional data left on closed socket"
}
}
@@ -943,9 +962,10 @@ proc http::Event {sock token} {
return
}
if {$state(state) eq "connecting"} {
- set state(state) "header"
if {[catch {gets $sock state(http)} n]} {
return [Finish $token $n]
+ } elseif {$n >= 0} {
+ set state(state) "header"
}
} elseif {$state(state) eq "header"} {
if {[catch {gets $sock line} n]} {
@@ -953,7 +973,9 @@ proc http::Event {sock token} {
} elseif {$n == 0} {
# We have now read all headers
# We ignore HTTP/1.1 100 Continue returns. RFC2616 sec 8.2.3
- if {$state(http) == "" || [lindex $state(http) 1] == 100} { return }
+ if {$state(http) == "" || [lindex $state(http) 1] == 100} {
+ return
+ }
set state(state) body
@@ -963,14 +985,15 @@ proc http::Event {sock token} {
return
}
- # For non-chunked transfer we may have no body -- in this case we
- # may get no further file event if the connection doesn't close and
- # no more data is sent. We can tell and must finish up now - not
- # later.
- if {!(([info exists state(connection)]
- && ($state(connection) eq "close"))
- || [info exists state(transfer)])
- && $state(totalsize) == 0
+ # For non-chunked transfer we may have no body - in this case we
+ # may get no further file event if the connection doesn't close
+ # and no more data is sent. We can tell and must finish up now -
+ # not later.
+ if {
+ !(([info exists state(connection)]
+ && ($state(connection) eq "close"))
+ || [info exists state(transfer)])
+ && ($state(totalsize) == 0)
} then {
Log "body size is 0 and no events likely - complete."
Eof $token
@@ -980,18 +1003,24 @@ proc http::Event {sock token} {
# We have to use binary translation to count bytes properly.
fconfigure $sock -translation binary
- if {$state(-binary) || ![string match -nocase text* $state(type)]} {
+ if {
+ $state(-binary) || ![string match -nocase text* $state(type)]
+ } then {
# Turn off conversions for non-text data
set state(binary) 1
}
- if {$state(binary) || [string match *gzip* $state(coding)]
- || [string match *compress* $state(coding)]} {
+ if {
+ $state(binary) || [string match *gzip* $state(coding)] ||
+ [string match *compress* $state(coding)]
+ } then {
if {[info exists state(-channel)]} {
fconfigure $state(-channel) -translation binary
}
}
- if {[info exists state(-channel)] &&
- ![info exists state(-handler)]} {
+ if {
+ [info exists state(-channel)] &&
+ ![info exists state(-handler)]
+ } then {
# Initiate a sequence of background fcopies
fileevent $sock readable {}
CopyStart $sock $token
@@ -1041,8 +1070,10 @@ proc http::Event {sock token} {
Log "final chunk part"
Eof $token
}
- } elseif {[info exists state(transfer)]
- && $state(transfer) eq "chunked"} {
+ } elseif {
+ [info exists state(transfer)]
+ && $state(transfer) eq "chunked"
+ } then {
set size 0
set chunk [getTextLine $sock]
set n [string length $chunk]
@@ -1079,12 +1110,14 @@ proc http::Event {sock token} {
incr state(currentsize) $n
}
# If Content-Length - check for end of data.
- if {($state(totalsize) > 0)
- && ($state(currentsize) >= $state(totalsize))} {
+ if {
+ ($state(totalsize) > 0)
+ && ($state(currentsize) >= $state(totalsize))
+ } then {
Eof $token
}
}
- } err]} {
+ } err]} then {
return [Finish $token $err]
} else {
if {[info exists state(-progress)]} {
@@ -1143,7 +1176,7 @@ proc http::CopyStart {sock token} {
if {[catch {
fcopy $sock $state(-channel) -size $state(-blocksize) -command \
[list http::CopyDone $token]
- } err]} {
+ } err]} then {
Finish $token $err
}
}
@@ -1200,22 +1233,26 @@ proc http::Eof {token {force 0}} {
if {($state(coding) eq "gzip") && [string length $state(body)] > 0} {
if {[catch {
- set state(body) [Gunzip $state(body)]
- } err]} {
- return [Finish $token $err]
+ if {[package vsatisfies [package present Tcl] 8.6]} {
+ # The zlib integration into 8.6 includes proper gzip support
+ set state(body) [zlib gunzip $state(body)]
+ } else {
+ set state(body) [Gunzip $state(body)]
+ }
+ } err]} then {
+ return [Finish $token $err]
}
}
if {!$state(binary)} {
-
- # If we are getting text, set the incoming channel's
- # encoding correctly. iso8859-1 is the RFC default, but
- # this could be any IANA charset. However, we only know
- # how to convert what we have encodings for.
+ # If we are getting text, set the incoming channel's encoding
+ # correctly. iso8859-1 is the RFC default, but this could be any IANA
+ # charset. However, we only know how to convert what we have
+ # encodings for.
set enc [CharsetToEncoding $state(charset)]
if {$enc ne "binary"} {
- set state(body) [encoding convertfrom $enc $state(body)]
+ set state(body) [encoding convertfrom $enc $state(body)]
}
# Translate text line endings.
@@ -1317,8 +1354,10 @@ proc http::mapReply {string} {
proc http::ProxyRequired {host} {
variable http
if {[info exists http(-proxyhost)] && [string length $http(-proxyhost)]} {
- if {![info exists http(-proxyport)] || \
- ![string length $http(-proxyport)]} {
+ if {
+ ![info exists http(-proxyport)] ||
+ ![string length $http(-proxyport)]
+ } then {
set http(-proxyport) 8080
}
return [list $http(-proxyhost) $http(-proxyport)]
@@ -1327,33 +1366,33 @@ proc http::ProxyRequired {host} {
# http::CharsetToEncoding --
#
-# Tries to map a given IANA charset to a tcl encoding.
-# If no encoding can be found, returns binary.
+# Tries to map a given IANA charset to a tcl encoding. If no encoding
+# can be found, returns binary.
#
proc http::CharsetToEncoding {charset} {
variable encodings
set charset [string tolower $charset]
- if {[regexp {iso-?8859-([0-9]+)} $charset - num]} {
+ if {[regexp {iso-?8859-([0-9]+)} $charset -> num]} {
set encoding "iso8859-$num"
- } elseif {[regexp {iso-?2022-(jp|kr)} $charset - ext]} {
+ } elseif {[regexp {iso-?2022-(jp|kr)} $charset -> ext]} {
set encoding "iso2022-$ext"
- } elseif {[regexp {shift[-_]?js} $charset -]} {
+ } elseif {[regexp {shift[-_]?js} $charset]} {
set encoding "shiftjis"
- } elseif {[regexp {(windows|cp)-?([0-9]+)} $charset - - num]} {
+ } elseif {[regexp {(?:windows|cp)-?([0-9]+)} $charset -> num]} {
set encoding "cp$num"
} elseif {$charset eq "us-ascii"} {
set encoding "ascii"
- } elseif {[regexp {(iso-?)?lat(in)?-?([0-9]+)} $charset - - - num]} {
+ } elseif {[regexp {(?:iso-?)?lat(?:in)?-?([0-9]+)} $charset -> num]} {
switch -- $num {
5 {set encoding "iso8859-9"}
- 1 -
- 2 -
- 3 {set encoding "iso8859-$num"}
+ 1 - 2 - 3 {
+ set encoding "iso8859-$num"
+ }
}
} else {
- # other charset, like euc-xx, utf-8,... may directly maps to encoding
+ # other charset, like euc-xx, utf-8,... may directly map to encoding
set encoding $charset
}
set idx [lsearch -exact $encodings $encoding]
@@ -1380,9 +1419,10 @@ proc http::Gunzip {data} {
return -code error "invalid compression method"
}
+ # lassign [split $flags ""] f_text f_crc f_extra f_name f_comment
foreach {f_text f_crc f_extra f_name f_comment} [split $flags ""] break
set extra ""
- if { $f_extra } {
+ if {$f_extra} {
binary scan $data @${pos}S xlen
incr pos 2
set extra [string range $data $pos $xlen]
@@ -1390,21 +1430,21 @@ proc http::Gunzip {data} {
}
set name ""
- if { $f_name } {
+ if {$f_name} {
set ndx [string first \0 $data $pos]
set name [string range $data $pos $ndx]
set pos [incr ndx]
}
set comment ""
- if { $f_comment } {
+ if {$f_comment} {
set ndx [string first \0 $data $pos]
set comment [string range $data $pos $ndx]
set pos [incr ndx]
}
set fcrc ""
- if { $f_crc } {
+ if {$f_crc} {
set fcrc [string range $data $pos [incr pos]]
incr pos
}
@@ -1412,7 +1452,7 @@ proc http::Gunzip {data} {
binary scan [string range $data end-7 end] ii crc size
set inflated [zlib inflate [string range $data $pos end-8]]
set chk [zlib crc32 $inflated]
- if { ($crc & 0xffffffff) != ($chk & 0xffffffff)} {
+ if {($crc & 0xffffffff) != ($chk & 0xffffffff)} {
return -code error "invalid data: checksum mismatch $crc != $chk"
}
return $inflated
diff --git a/library/http/pkgIndex.tcl b/library/http/pkgIndex.tcl
index 6badcea..07724d3 100644
--- a/library/http/pkgIndex.tcl
+++ b/library/http/pkgIndex.tcl
@@ -1,4 +1,4 @@
# Tcl package index file, version 1.1
if {![package vsatisfies [package provide Tcl] 8.4]} {return}
-package ifneeded http 2.7.2 [list tclPkgSetup $dir http 2.7.2 {{http.tcl source {::http::config ::http::formatQuery ::http::geturl ::http::reset ::http::wait ::http::register ::http::unregister ::http::mapReply}}}]
+package ifneeded http 2.7.3 [list tclPkgSetup $dir http 2.7.3 {{http.tcl source {::http::config ::http::formatQuery ::http::geturl ::http::reset ::http::wait ::http::register ::http::unregister ::http::mapReply}}}]
diff --git a/unix/Makefile.in b/unix/Makefile.in
index 227177f..17561a5 100644
--- a/unix/Makefile.in
+++ b/unix/Makefile.in
@@ -4,7 +4,7 @@
# "./configure", which is a configuration script generated by the "autoconf"
# program (constructs like "@foo@" will get replaced in the actual Makefile.
#
-# RCS: @(#) $Id: Makefile.in,v 1.229.2.13 2009/04/08 19:11:52 andreas_kupries Exp $
+# RCS: @(#) $Id: Makefile.in,v 1.229.2.14 2009/04/09 17:05:41 dgp Exp $
VERSION = @TCL_VERSION@
MAJOR_VERSION = @TCL_MAJOR_VERSION@
@@ -786,8 +786,8 @@ install-libraries: libraries $(INSTALL_TZDATA) install-msgs
do \
$(INSTALL_DATA) $$i "$(SCRIPT_INSTALL_DIR)"/http1.0; \
done;
- @echo "Installing package http 2.7.2 as a Tcl Module";
- @$(INSTALL_DATA) $(TOP_DIR)/library/http/http.tcl "$(SCRIPT_INSTALL_DIR)"/../tcl8/8.4/http-2.7.2.tm;
+ @echo "Installing package http 2.7.3 as a Tcl Module";
+ @$(INSTALL_DATA) $(TOP_DIR)/library/http/http.tcl "$(SCRIPT_INSTALL_DIR)"/../tcl8/8.4/http-2.7.3.tm;
@echo "Installing library opt0.4 directory";
@for i in $(TOP_DIR)/library/opt/*.tcl ; \
do \
diff --git a/win/Makefile.in b/win/Makefile.in
index 35bdd97..7ae9c93 100644
--- a/win/Makefile.in
+++ b/win/Makefile.in
@@ -4,7 +4,7 @@
# "./configure", which is a configuration script generated by the "autoconf"
# program (constructs like "@foo@" will get replaced in the actual Makefile.
#
-# RCS: @(#) $Id: Makefile.in,v 1.124.2.8 2009/04/08 19:12:04 andreas_kupries Exp $
+# RCS: @(#) $Id: Makefile.in,v 1.124.2.9 2009/04/09 17:05:42 dgp Exp $
VERSION = @TCL_VERSION@
@@ -635,8 +635,8 @@ install-libraries: libraries install-tzdata install-msgs
do \
$(COPY) "$$j" "$(SCRIPT_INSTALL_DIR)/http1.0"; \
done;
- @echo "Installing package http 2.7.2 as a Tcl Module";
- @$(COPY) $(ROOT_DIR)/library/http/http.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.4/http-2.7.2.tm;
+ @echo "Installing package http 2.7.3 as a Tcl Module";
+ @$(COPY) $(ROOT_DIR)/library/http/http.tcl $(SCRIPT_INSTALL_DIR)/../tcl8/8.4/http-2.7.3.tm;
@echo "Installing library opt0.4 directory";
@for j in $(ROOT_DIR)/library/opt/*.tcl; \
do \