diff options
Diffstat (limited to 'compat/zlib/contrib/infback9/infback9.c')
| -rw-r--r-- | compat/zlib/contrib/infback9/infback9.c | 615 |
1 files changed, 615 insertions, 0 deletions
diff --git a/compat/zlib/contrib/infback9/infback9.c b/compat/zlib/contrib/infback9/infback9.c new file mode 100644 index 0000000..05fb3e3 --- /dev/null +++ b/compat/zlib/contrib/infback9/infback9.c @@ -0,0 +1,615 @@ +/* infback9.c -- inflate deflate64 data using a call-back interface + * Copyright (C) 1995-2008 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infback9.h" +#include "inftree9.h" +#include "inflate9.h" + +#define WSIZE 65536UL + +/* + strm provides memory allocation functions in zalloc and zfree, or + Z_NULL to use the library memory allocation functions. + + window is a user-supplied window and output buffer that is 64K bytes. + */ +int ZEXPORT inflateBack9Init_(strm, window, version, stream_size) +z_stream FAR *strm; +unsigned char FAR *window; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL || window == Z_NULL) + return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *)ZALLOC(strm, 1, + sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (voidpf)state; + state->window = window; + return Z_OK; +} + +/* + Build and output length and distance decoding tables for fixed code + decoding. + */ +#ifdef MAKEFIXED +#include <stdio.h> + +void makefixed9(void) +{ + unsigned sym, bits, low, size; + code *next, *lenfix, *distfix; + struct inflate_state state; + code fixed[544]; + + /* literal/length table */ + sym = 0; + while (sym < 144) state.lens[sym++] = 8; + while (sym < 256) state.lens[sym++] = 9; + while (sym < 280) state.lens[sym++] = 7; + while (sym < 288) state.lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work); + + /* distance table */ + sym = 0; + while (sym < 32) state.lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work); + + /* write tables */ + puts(" /* inffix9.h -- table for decoding deflate64 fixed codes"); + puts(" * Generated automatically by makefixed9()."); + puts(" */"); + puts(""); + puts(" /* WARNING: this file should *not* be used by applications."); + puts(" It is part of the implementation of this library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + size = 1U << 9; + printf(" static const code lenfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 6) == 0) printf("\n "); + printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits, + lenfix[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); + size = 1U << 5; + printf("\n static const code distfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 5) == 0) printf("\n "); + printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits, + distfix[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); +} +#endif /* MAKEFIXED */ + +/* Macros for inflateBack(): */ + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Assure that some input is available. If input is requested, but denied, + then return a Z_BUF_ERROR from inflateBack(). */ +#define PULL() \ + do { \ + if (have == 0) { \ + have = in(in_desc, &next); \ + if (have == 0) { \ + next = Z_NULL; \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflateBack() + with an error if there is no input available. */ +#define PULLBYTE() \ + do { \ + PULL(); \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflateBack() with + an error. */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n <= 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Assure that some output space is available, by writing out the window + if it's full. If the write fails, return from inflateBack() with a + Z_BUF_ERROR. */ +#define ROOM() \ + do { \ + if (left == 0) { \ + put = window; \ + left = WSIZE; \ + wrap = 1; \ + if (out(out_desc, put, (unsigned)left)) { \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* + strm provides the memory allocation functions and window buffer on input, + and provides information on the unused input on return. For Z_DATA_ERROR + returns, strm will also provide an error message. + + in() and out() are the call-back input and output functions. When + inflateBack() needs more input, it calls in(). When inflateBack() has + filled the window with output, or when it completes with data in the + window, it calls out() to write out the data. The application must not + change the provided input until in() is called again or inflateBack() + returns. The application must not change the window/output buffer until + inflateBack() returns. + + in() and out() are called with a descriptor parameter provided in the + inflateBack() call. This parameter can be a structure that provides the + information required to do the read or write, as well as accumulated + information on the input and output such as totals and check values. + + in() should return zero on failure. out() should return non-zero on + failure. If either in() or out() fails, than inflateBack() returns a + Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it + was in() or out() that caused in the error. Otherwise, inflateBack() + returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format + error, or Z_MEM_ERROR if it could not allocate memory for the state. + inflateBack() can also return Z_STREAM_ERROR if the input parameters + are not correct, i.e. strm is Z_NULL or the state was not initialized. + */ +int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc) +z_stream FAR *strm; +in_func in; +void FAR *in_desc; +out_func out; +void FAR *out_desc; +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have; /* available input */ + unsigned long left; /* available output */ + inflate_mode mode; /* current inflate mode */ + int lastblock; /* true if processing last block */ + int wrap; /* true if the window has wrapped */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned extra; /* extra bits needed */ + unsigned long length; /* literal or length of data to copy */ + unsigned long offset; /* distance back to copy string from */ + unsigned long copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + code here; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; +#include "inffix9.h" + + /* Check that the strm exists and that the state was initialized */ + if (strm == Z_NULL || strm->state == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* Reset the state */ + strm->msg = Z_NULL; + mode = TYPE; + lastblock = 0; + wrap = 0; + window = state->window; + next = strm->next_in; + have = next != Z_NULL ? strm->avail_in : 0; + hold = 0; + bits = 0; + put = window; + left = WSIZE; + lencode = Z_NULL; + distcode = Z_NULL; + + /* Inflate until end of block marked as last */ + for (;;) + switch (mode) { + case TYPE: + /* determine and dispatch block type */ + if (lastblock) { + BYTEBITS(); + mode = DONE; + break; + } + NEEDBITS(3); + lastblock = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + lastblock ? " (last)" : "")); + mode = STORED; + break; + case 1: /* fixed block */ + lencode = lenfix; + lenbits = 9; + distcode = distfix; + distbits = 5; + Tracev((stderr, "inflate: fixed codes block%s\n", + lastblock ? " (last)" : "")); + mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + lastblock ? " (last)" : "")); + mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + mode = BAD; + } + DROPBITS(2); + break; + + case STORED: + /* get and verify stored block length */ + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + mode = BAD; + break; + } + length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %lu\n", + length)); + INITBITS(); + + /* copy stored block from input to output */ + while (length != 0) { + copy = length; + PULL(); + ROOM(); + if (copy > have) copy = have; + if (copy > left) copy = left; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + length -= copy; + } + Tracev((stderr, "inflate: stored end\n")); + mode = TYPE; + break; + + case TABLE: + /* get dynamic table entries descriptor */ + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); + if (state->nlen > 286) { + strm->msg = (char *)"too many length symbols"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: table sizes ok\n")); + + /* get code length code lengths (not a typo) */ + state->have = 0; + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + lencode = (code const FAR *)(state->next); + lenbits = 7; + ret = inflate_table9(CODES, state->lens, 19, &(state->next), + &(lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + + /* get length and distance code code lengths */ + state->have = 0; + while (state->have < state->nlen + state->ndist) { + for (;;) { + here = lencode[BITS(lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.val < 16) { + NEEDBITS(here.bits); + DROPBITS(here.bits); + state->lens[state->have++] = here.val; + } + else { + if (here.val == 16) { + NEEDBITS(here.bits + 2); + DROPBITS(here.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + mode = BAD; + break; + } + len = (unsigned)(state->lens[state->have - 1]); + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (here.val == 17) { + NEEDBITS(here.bits + 3); + DROPBITS(here.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(here.bits + 7); + DROPBITS(here.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (mode == BAD) break; + + /* check for end-of-block code (better have one) */ + if (state->lens[256] == 0) { + strm->msg = (char *)"invalid code -- missing end-of-block"; + mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftree9.h + concerning the ENOUGH constants, which depend on those values */ + state->next = state->codes; + lencode = (code const FAR *)(state->next); + lenbits = 9; + ret = inflate_table9(LENS, state->lens, state->nlen, + &(state->next), &(lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + mode = BAD; + break; + } + distcode = (code const FAR *)(state->next); + distbits = 6; + ret = inflate_table9(DISTS, state->lens + state->nlen, + state->ndist, &(state->next), &(distbits), + state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + mode = LEN; + + case LEN: + /* get a literal, length, or end-of-block code */ + for (;;) { + here = lencode[BITS(lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.op && (here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + length = (unsigned)here.val; + + /* process literal */ + if (here.op == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + ROOM(); + *put++ = (unsigned char)(length); + left--; + mode = LEN; + break; + } + + /* process end of block */ + if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + mode = TYPE; + break; + } + + /* invalid code */ + if (here.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + mode = BAD; + break; + } + + /* length code -- get extra bits, if any */ + extra = (unsigned)(here.op) & 31; + if (extra != 0) { + NEEDBITS(extra); + length += BITS(extra); + DROPBITS(extra); + } + Tracevv((stderr, "inflate: length %lu\n", length)); + + /* get distance code */ + for (;;) { + here = distcode[BITS(distbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if ((here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + if (here.op & 64) { + strm->msg = (char *)"invalid distance code"; + mode = BAD; + break; + } + offset = (unsigned)here.val; + + /* get distance extra bits, if any */ + extra = (unsigned)(here.op) & 15; + if (extra != 0) { + NEEDBITS(extra); + offset += BITS(extra); + DROPBITS(extra); + } + if (offset > WSIZE - (wrap ? 0: left)) { + strm->msg = (char *)"invalid distance too far back"; + mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %lu\n", offset)); + + /* copy match from window to output */ + do { + ROOM(); + copy = WSIZE - offset; + if (copy < left) { + from = put + copy; + copy = left - copy; + } + else { + from = put - offset; + copy = left; + } + if (copy > length) copy = length; + length -= copy; + left -= copy; + do { + *put++ = *from++; + } while (--copy); + } while (length != 0); + break; + + case DONE: + /* inflate stream terminated properly -- write leftover output */ + ret = Z_STREAM_END; + if (left < WSIZE) { + if (out(out_desc, window, (unsigned)(WSIZE - left))) + ret = Z_BUF_ERROR; + } + goto inf_leave; + + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + + default: /* can't happen, but makes compilers happy */ + ret = Z_STREAM_ERROR; + goto inf_leave; + } + + /* Return unused input */ + inf_leave: + strm->next_in = next; + strm->avail_in = have; + return ret; +} + +int ZEXPORT inflateBack9End(strm) +z_stream FAR *strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} |