summaryrefslogtreecommitdiffstats
path: root/compat/zlib/contrib/puff
diff options
context:
space:
mode:
Diffstat (limited to 'compat/zlib/contrib/puff')
-rw-r--r--compat/zlib/contrib/puff/Makefile40
-rw-r--r--compat/zlib/contrib/puff/puff.c252
-rw-r--r--compat/zlib/contrib/puff/puff.h8
-rw-r--r--compat/zlib/contrib/puff/pufftest.c165
-rw-r--r--compat/zlib/contrib/puff/zeros.rawbin1213 -> 2517 bytes
5 files changed, 275 insertions, 190 deletions
diff --git a/compat/zlib/contrib/puff/Makefile b/compat/zlib/contrib/puff/Makefile
index b6b6940..0e2594c 100644
--- a/compat/zlib/contrib/puff/Makefile
+++ b/compat/zlib/contrib/puff/Makefile
@@ -1,8 +1,42 @@
-puff: puff.c puff.h
- cc -DTEST -o puff puff.c
+CFLAGS=-O
+
+puff: puff.o pufftest.o
+
+puff.o: puff.h
+
+pufftest.o: puff.h
test: puff
puff zeros.raw
+puft: puff.c puff.h pufftest.o
+ cc -fprofile-arcs -ftest-coverage -o puft puff.c pufftest.o
+
+# puff full coverage test (should say 100%)
+cov: puft
+ @rm -f *.gcov *.gcda
+ @puft -w zeros.raw 2>&1 | cat > /dev/null
+ @echo '04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '00 00 00 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 254
+ @echo '00 01 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '01 01 00 fe ff 0a' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+ @echo '02 7e ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+ @echo '02' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '04 80 49 92 24 49 92 24 71 ff ff 93 11 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 249
+ @echo '04 c0 81 08 00 00 00 00 20 7f eb 0b 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+ @echo '0b 00 00' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+ @echo '1a 07' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+ @echo '0c c0 81 00 00 00 00 00 90 ff 6b 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 245
+ @puft -f zeros.raw 2>&1 | cat > /dev/null
+ @echo 'fc 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 253
+ @echo '04 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 252
+ @echo '04 00 24 49' | xxd -r -p | puft 2> /dev/null || test $$? -eq 251
+ @echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 84' | xxd -r -p | puft 2> /dev/null || test $$? -eq 248
+ @echo '04 00 24 e9 ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 250
+ @echo '04 00 24 e9 ff 6d' | xxd -r -p | puft 2> /dev/null || test $$? -eq 247
+ @gcov -n puff.c
+
clean:
- rm -f puff puff.o
+ rm -f puff puft *.o *.gc*
diff --git a/compat/zlib/contrib/puff/puff.c b/compat/zlib/contrib/puff/puff.c
index 650694e..df8470c 100644
--- a/compat/zlib/contrib/puff/puff.c
+++ b/compat/zlib/contrib/puff/puff.c
@@ -2,7 +2,7 @@
* puff.c
* Copyright (C) 2002-2010 Mark Adler
* For conditions of distribution and use, see copyright notice in puff.h
- * version 2.1, 4 Apr 2010
+ * version 2.2, 25 Apr 2010
*
* puff.c is a simple inflate written to be an unambiguous way to specify the
* deflate format. It is not written for speed but rather simplicity. As a
@@ -49,9 +49,9 @@
* - Fix fixed codes table error
* - Provide a scanning mode for determining size of
* uncompressed data
- * 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Jean-loup]
+ * 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Gailly]
* - Add a puff.h file for the interface
- * - Add braces in puff() for else do [Jean-loup]
+ * - Add braces in puff() for else do [Gailly]
* - Use indexes instead of pointers for readability
* 1.4 31 Mar 2002 - Simplify construct() code set check
* - Fix some comments
@@ -69,13 +69,19 @@
* - Allow TEST code to read from piped stdin
* 2.1 4 Apr 2010 - Avoid variable initialization for happier compilers
* - Avoid unsigned comparisons for even happier compilers
+ * 2.2 25 Apr 2010 - Fix bug in variable initializations [Oberhumer]
+ * - Add const where appropriate [Oberhumer]
+ * - Split if's and ?'s for coverage testing
+ * - Break out test code to separate file
+ * - Move NIL to puff.h
+ * - Allow incomplete code only if single code length is 1
+ * - Add full code coverage test to Makefile
*/
#include <setjmp.h> /* for setjmp(), longjmp(), and jmp_buf */
#include "puff.h" /* prototype for puff() */
#define local static /* for local function definitions */
-#define NIL ((unsigned char *)0) /* for no output option */
/*
* Maximums for allocations and loops. It is not useful to change these --
@@ -95,7 +101,7 @@ struct state {
unsigned long outcnt; /* bytes written to out so far */
/* input state */
- unsigned char *in; /* input buffer */
+ const unsigned char *in; /* input buffer */
unsigned long inlen; /* available input at in */
unsigned long incnt; /* bytes read so far */
int bitbuf; /* bit buffer */
@@ -123,7 +129,8 @@ local int bits(struct state *s, int need)
/* load at least need bits into val */
val = s->bitbuf;
while (s->bitcnt < need) {
- if (s->incnt == s->inlen) longjmp(s->env, 1); /* out of input */
+ if (s->incnt == s->inlen)
+ longjmp(s->env, 1); /* out of input */
val |= (long)(s->in[s->incnt++]) << s->bitcnt; /* load eight bits */
s->bitcnt += 8;
}
@@ -162,7 +169,8 @@ local int stored(struct state *s)
s->bitcnt = 0;
/* get length and check against its one's complement */
- if (s->incnt + 4 > s->inlen) return 2; /* not enough input */
+ if (s->incnt + 4 > s->inlen)
+ return 2; /* not enough input */
len = s->in[s->incnt++];
len |= s->in[s->incnt++] << 8;
if (s->in[s->incnt++] != (~len & 0xff) ||
@@ -170,7 +178,8 @@ local int stored(struct state *s)
return -2; /* didn't match complement! */
/* copy len bytes from in to out */
- if (s->incnt + len > s->inlen) return 2; /* not enough input */
+ if (s->incnt + len > s->inlen)
+ return 2; /* not enough input */
if (s->out != NIL) {
if (s->outcnt + len > s->outlen)
return 1; /* not enough output space */
@@ -222,7 +231,7 @@ struct huffman {
* in the deflate format. See the format notes for fixed() and dynamic().
*/
#ifdef SLOW
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
{
int len; /* current number of bits in code */
int code; /* len bits being decoded */
@@ -250,7 +259,7 @@ local int decode(struct state *s, struct huffman *h)
* a few percent larger.
*/
#else /* !SLOW */
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
{
int len; /* current number of bits in code */
int code; /* len bits being decoded */
@@ -283,10 +292,13 @@ local int decode(struct state *s, struct huffman *h)
len++;
}
left = (MAXBITS+1) - len;
- if (left == 0) break;
- if (s->incnt == s->inlen) longjmp(s->env, 1); /* out of input */
+ if (left == 0)
+ break;
+ if (s->incnt == s->inlen)
+ longjmp(s->env, 1); /* out of input */
bitbuf = s->in[s->incnt++];
- if (left > 8) left = 8;
+ if (left > 8)
+ left = 8;
}
return -10; /* ran out of codes */
}
@@ -324,7 +336,7 @@ local int decode(struct state *s, struct huffman *h)
* - Within a given code length, the symbols are kept in ascending order for
* the code bits definition.
*/
-local int construct(struct huffman *h, short *length, int n)
+local int construct(struct huffman *h, const short *length, int n)
{
int symbol; /* current symbol when stepping through length[] */
int len; /* current length when stepping through h->count[] */
@@ -344,7 +356,8 @@ local int construct(struct huffman *h, short *length, int n)
for (len = 1; len <= MAXBITS; len++) {
left <<= 1; /* one more bit, double codes left */
left -= h->count[len]; /* deduct count from possible codes */
- if (left < 0) return left; /* over-subscribed--return negative */
+ if (left < 0)
+ return left; /* over-subscribed--return negative */
} /* left > 0 means incomplete */
/* generate offsets into symbol table for each length for sorting */
@@ -420,8 +433,8 @@ local int construct(struct huffman *h, short *length, int n)
* defined to do the wrong thing in this case.
*/
local int codes(struct state *s,
- struct huffman *lencode,
- struct huffman *distcode)
+ const struct huffman *lencode,
+ const struct huffman *distcode)
{
int symbol; /* decoded symbol */
int len; /* length for copy */
@@ -444,11 +457,13 @@ local int codes(struct state *s,
/* decode literals and length/distance pairs */
do {
symbol = decode(s, lencode);
- if (symbol < 0) return symbol; /* invalid symbol */
+ if (symbol < 0)
+ return symbol; /* invalid symbol */
if (symbol < 256) { /* literal: symbol is the byte */
/* write out the literal */
if (s->out != NIL) {
- if (s->outcnt == s->outlen) return 1;
+ if (s->outcnt == s->outlen)
+ return 1;
s->out[s->outcnt] = symbol;
}
s->outcnt++;
@@ -456,12 +471,14 @@ local int codes(struct state *s,
else if (symbol > 256) { /* length */
/* get and compute length */
symbol -= 257;
- if (symbol >= 29) return -10; /* invalid fixed code */
+ if (symbol >= 29)
+ return -10; /* invalid fixed code */
len = lens[symbol] + bits(s, lext[symbol]);
/* get and check distance */
symbol = decode(s, distcode);
- if (symbol < 0) return symbol; /* invalid symbol */
+ if (symbol < 0)
+ return symbol; /* invalid symbol */
dist = dists[symbol] + bits(s, dext[symbol]);
#ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
if (dist > s->outcnt)
@@ -470,13 +487,15 @@ local int codes(struct state *s,
/* copy length bytes from distance bytes back */
if (s->out != NIL) {
- if (s->outcnt + len > s->outlen) return 1;
+ if (s->outcnt + len > s->outlen)
+ return 1;
while (len--) {
s->out[s->outcnt] =
#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
- dist > s->outcnt ? 0 :
+ dist > s->outcnt ?
+ 0 :
#endif
- s->out[s->outcnt - dist];
+ s->out[s->outcnt - dist];
s->outcnt++;
}
}
@@ -525,6 +544,12 @@ local int fixed(struct state *s)
int symbol;
short lengths[FIXLCODES];
+ /* construct lencode and distcode */
+ lencode.count = lencnt;
+ lencode.symbol = lensym;
+ distcode.count = distcnt;
+ distcode.symbol = distsym;
+
/* literal/length table */
for (symbol = 0; symbol < 144; symbol++)
lengths[symbol] = 8;
@@ -541,12 +566,6 @@ local int fixed(struct state *s)
lengths[symbol] = 5;
construct(&distcode, lengths, MAXDCODES);
- /* construct lencode and distcode */
- lencode.count = lencnt;
- lencode.symbol = lensym;
- distcode.count = distcnt;
- distcode.symbol = distsym;
-
/* do this just once */
virgin = 0;
}
@@ -675,7 +694,8 @@ local int dynamic(struct state *s)
/* build huffman table for code lengths codes (use lencode temporarily) */
err = construct(&lencode, lengths, 19);
- if (err != 0) return -4; /* require complete code set here */
+ if (err != 0) /* require complete code set here */
+ return -4;
/* read length/literal and distance code length tables */
index = 0;
@@ -689,7 +709,8 @@ local int dynamic(struct state *s)
else { /* repeat instruction */
len = 0; /* assume repeating zeros */
if (symbol == 16) { /* repeat last length 3..6 times */
- if (index == 0) return -5; /* no last length! */
+ if (index == 0)
+ return -5; /* no last length! */
len = lengths[index - 1]; /* last length */
symbol = 3 + bits(s, 2);
}
@@ -710,13 +731,13 @@ local int dynamic(struct state *s)
/* build huffman table for literal/length codes */
err = construct(&lencode, lengths, nlen);
- if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
- return -7; /* only allow incomplete codes if just one code */
+ if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
+ return -7; /* incomplete code ok only for single length 1 code */
/* build huffman table for distance codes */
err = construct(&distcode, lengths + nlen, ndist);
- if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1))
- return -8; /* only allow incomplete codes if just one code */
+ if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
+ return -8; /* incomplete code ok only for single length 1 code */
/* decode data until end-of-block code */
return codes(s, &lencode, &distcode);
@@ -768,7 +789,7 @@ local int dynamic(struct state *s)
*/
int puff(unsigned char *dest, /* pointer to destination pointer */
unsigned long *destlen, /* amount of output space */
- unsigned char *source, /* pointer to source data pointer */
+ const unsigned char *source, /* pointer to source data pointer */
unsigned long *sourcelen) /* amount of input available */
{
struct state s; /* input/output state */
@@ -795,11 +816,15 @@ int puff(unsigned char *dest, /* pointer to destination pointer */
do {
last = bits(&s, 1); /* one if last block */
type = bits(&s, 2); /* block type 0..3 */
- err = type == 0 ? stored(&s) :
- (type == 1 ? fixed(&s) :
- (type == 2 ? dynamic(&s) :
- -1)); /* type == 3, invalid */
- if (err != 0) break; /* return with error */
+ err = type == 0 ?
+ stored(&s) :
+ (type == 1 ?
+ fixed(&s) :
+ (type == 2 ?
+ dynamic(&s) :
+ -1)); /* type == 3, invalid */
+ if (err != 0)
+ break; /* return with error */
} while (!last);
}
@@ -810,146 +835,3 @@ int puff(unsigned char *dest, /* pointer to destination pointer */
}
return err;
}
-
-#ifdef TEST
-/* Examples of how to use puff().
-
- Usage: puff [-w] [-nnn] file
- ... | puff [-w] [-nnn]
-
- where file is the input file with deflate data, nnn is the number of bytes
- of input to skip before inflating (e.g. to skip a zlib or gzip header), and
- -w is used to write the decompressed data to stdout */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-/* Return size times approximately the cube root of 2, keeping the result as 1,
- 3, or 5 times a power of 2 -- the result is always > size, until the result
- is the maximum value of an unsigned long, where it remains. This is useful
- to keep reallocations less than ~33% over the actual data. */
-local size_t bythirds(size_t size)
-{
- int n;
- size_t m;
-
- m = size;
- for (n = 0; m; n++)
- m >>= 1;
- if (n < 3)
- return size + 1;
- n -= 3;
- m = size >> n;
- m += m == 6 ? 2 : 1;
- m <<= n;
- return m > size ? m : (size_t)(-1);
-}
-
-/* Read the input file *name, or stdin if name is NULL, into allocated memory.
- Reallocate to larger buffers until the entire file is read in. Return a
- pointer to the allocated data, or NULL if there was a memory allocation
- failure. *len is the number of bytes of data read from the input file (even
- if load() returns NULL). If the input file was empty or could not be opened
- or read, *len is zero. */
-local void *load(char *name, size_t *len)
-{
- size_t size;
- void *buf, *swap;
- FILE *in;
-
- *len = 0;
- buf = malloc(size = 4096);
- if (buf == NULL)
- return NULL;
- in = name == NULL ? stdin : fopen(name, "rb");
- if (in != NULL) {
- for (;;) {
- *len += fread((char *)buf + *len, 1, size - *len, in);
- if (*len < size) break;
- size = bythirds(size);
- if (size == *len || (swap = realloc(buf, size)) == NULL) {
- free(buf);
- buf = NULL;
- break;
- }
- buf = swap;
- }
- fclose(in);
- }
- return buf;
-}
-
-int main(int argc, char **argv)
-{
- int ret, put = 0;
- unsigned skip = 0;
- char *arg, *name = NULL;
- unsigned char *source = NULL, *dest;
- size_t len = 0;
- unsigned long sourcelen, destlen;
-
- /* process arguments */
- while (arg = *++argv, --argc)
- if (arg[0] == '-') {
- if (arg[1] == 'w' && arg[2] == 0)
- put = 1;
- else if (arg[1] >= '0' && arg[1] <= '9')
- skip = (unsigned)atoi(arg + 1);
- else {
- fprintf(stderr, "invalid option %s\n", arg);
- return 3;
- }
- }
- else if (name != NULL) {
- fprintf(stderr, "only one file name allowed\n");
- return 3;
- }
- else
- name = arg;
- source = load(name, &len);
- if (source == NULL) {
- fprintf(stderr, "memory allocation failure\n");
- return 4;
- }
- if (len == 0) {
- fprintf(stderr, "could not read %s, or it was empty\n",
- name == NULL ? "<stdin>" : name);
- free(source);
- return 3;
- }
- if (skip >= len) {
- fprintf(stderr, "skip request of %d leaves no input\n", skip);
- free(source);
- return 3;
- }
-
- /* test inflate data with offset skip */
- len -= skip;
- sourcelen = (unsigned long)len;
- ret = puff(NIL, &destlen, source + skip, &sourcelen);
- if (ret)
- fprintf(stderr, "puff() failed with return code %d\n", ret);
- else {
- fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
- if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
- len - sourcelen);
- }
-
- /* if requested, inflate again and write decompressd data to stdout */
- if (put) {
- dest = malloc(destlen);
- if (dest == NULL) {
- fprintf(stderr, "memory allocation failure\n");
- free(source);
- return 4;
- }
- puff(dest, &destlen, source + skip, &sourcelen);
- fwrite(dest, 1, destlen, stdout);
- free(dest);
- }
-
- /* clean up */
- free(source);
- return ret;
-}
-#endif
diff --git a/compat/zlib/contrib/puff/puff.h b/compat/zlib/contrib/puff/puff.h
index 88d1b38..6a0080a 100644
--- a/compat/zlib/contrib/puff/puff.h
+++ b/compat/zlib/contrib/puff/puff.h
@@ -1,6 +1,6 @@
/* puff.h
Copyright (C) 2002-2010 Mark Adler, all rights reserved
- version 2.1, 4 Apr 2010
+ version 2.2, 25 Apr 2010
This software is provided 'as-is', without any express or implied
warranty. In no event will the author be held liable for any damages
@@ -25,7 +25,11 @@
/*
* See puff.c for purpose and usage.
*/
+#ifndef NIL
+# define NIL ((unsigned char *)0) /* for no output option */
+#endif
+
int puff(unsigned char *dest, /* pointer to destination pointer */
unsigned long *destlen, /* amount of output space */
- unsigned char *source, /* pointer to source data pointer */
+ const unsigned char *source, /* pointer to source data pointer */
unsigned long *sourcelen); /* amount of input available */
diff --git a/compat/zlib/contrib/puff/pufftest.c b/compat/zlib/contrib/puff/pufftest.c
new file mode 100644
index 0000000..76e35f6
--- /dev/null
+++ b/compat/zlib/contrib/puff/pufftest.c
@@ -0,0 +1,165 @@
+/*
+ * pufftest.c
+ * Copyright (C) 2002-2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 2.2, 25 Apr 2010
+ */
+
+/* Example of how to use puff().
+
+ Usage: puff [-w] [-f] [-nnn] file
+ ... | puff [-w] [-f] [-nnn]
+
+ where file is the input file with deflate data, nnn is the number of bytes
+ of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+ -w is used to write the decompressed data to stdout. -f is for coverage
+ testing, and causes pufftest to fail with not enough output space (-f does
+ a write like -w, so -w is not required). */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "puff.h"
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+# include <fcntl.h>
+# include <io.h>
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+#define local static
+
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+ 3, or 5 times a power of 2 -- the result is always > size, until the result
+ is the maximum value of an unsigned long, where it remains. This is useful
+ to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
+{
+ int n;
+ size_t m;
+
+ m = size;
+ for (n = 0; m; n++)
+ m >>= 1;
+ if (n < 3)
+ return size + 1;
+ n -= 3;
+ m = size >> n;
+ m += m == 6 ? 2 : 1;
+ m <<= n;
+ return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+ Reallocate to larger buffers until the entire file is read in. Return a
+ pointer to the allocated data, or NULL if there was a memory allocation
+ failure. *len is the number of bytes of data read from the input file (even
+ if load() returns NULL). If the input file was empty or could not be opened
+ or read, *len is zero. */
+local void *load(const char *name, size_t *len)
+{
+ size_t size;
+ void *buf, *swap;
+ FILE *in;
+
+ *len = 0;
+ buf = malloc(size = 4096);
+ if (buf == NULL)
+ return NULL;
+ in = name == NULL ? stdin : fopen(name, "rb");
+ if (in != NULL) {
+ for (;;) {
+ *len += fread((char *)buf + *len, 1, size - *len, in);
+ if (*len < size) break;
+ size = bythirds(size);
+ if (size == *len || (swap = realloc(buf, size)) == NULL) {
+ free(buf);
+ buf = NULL;
+ break;
+ }
+ buf = swap;
+ }
+ fclose(in);
+ }
+ return buf;
+}
+
+int main(int argc, char **argv)
+{
+ int ret, put = 0, fail = 0;
+ unsigned skip = 0;
+ char *arg, *name = NULL;
+ unsigned char *source = NULL, *dest;
+ size_t len = 0;
+ unsigned long sourcelen, destlen;
+
+ /* process arguments */
+ while (arg = *++argv, --argc)
+ if (arg[0] == '-') {
+ if (arg[1] == 'w' && arg[2] == 0)
+ put = 1;
+ else if (arg[1] == 'f' && arg[2] == 0)
+ fail = 1, put = 1;
+ else if (arg[1] >= '0' && arg[1] <= '9')
+ skip = (unsigned)atoi(arg + 1);
+ else {
+ fprintf(stderr, "invalid option %s\n", arg);
+ return 3;
+ }
+ }
+ else if (name != NULL) {
+ fprintf(stderr, "only one file name allowed\n");
+ return 3;
+ }
+ else
+ name = arg;
+ source = load(name, &len);
+ if (source == NULL) {
+ fprintf(stderr, "memory allocation failure\n");
+ return 4;
+ }
+ if (len == 0) {
+ fprintf(stderr, "could not read %s, or it was empty\n",
+ name == NULL ? "<stdin>" : name);
+ free(source);
+ return 3;
+ }
+ if (skip >= len) {
+ fprintf(stderr, "skip request of %d leaves no input\n", skip);
+ free(source);
+ return 3;
+ }
+
+ /* test inflate data with offset skip */
+ len -= skip;
+ sourcelen = (unsigned long)len;
+ ret = puff(NIL, &destlen, source + skip, &sourcelen);
+ if (ret)
+ fprintf(stderr, "puff() failed with return code %d\n", ret);
+ else {
+ fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+ if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+ len - sourcelen);
+ }
+
+ /* if requested, inflate again and write decompressd data to stdout */
+ if (put && ret == 0) {
+ if (fail)
+ destlen >>= 1;
+ dest = malloc(destlen);
+ if (dest == NULL) {
+ fprintf(stderr, "memory allocation failure\n");
+ free(source);
+ return 4;
+ }
+ puff(dest, &destlen, source + skip, &sourcelen);
+ SET_BINARY_MODE(stdout);
+ fwrite(dest, 1, destlen, stdout);
+ free(dest);
+ }
+
+ /* clean up */
+ free(source);
+ return ret;
+}
diff --git a/compat/zlib/contrib/puff/zeros.raw b/compat/zlib/contrib/puff/zeros.raw
index 637b7be..0a90e76 100644
--- a/compat/zlib/contrib/puff/zeros.raw
+++ b/compat/zlib/contrib/puff/zeros.raw
Binary files differ
generated by cgit v0.12 at 2024-12-26 15:03:05 (GMT)