diff options
Diffstat (limited to 'compat/zlib/examples/gzappend.c')
| -rw-r--r-- | compat/zlib/examples/gzappend.c | 504 |
1 files changed, 504 insertions, 0 deletions
diff --git a/compat/zlib/examples/gzappend.c b/compat/zlib/examples/gzappend.c new file mode 100644 index 0000000..662dec3 --- /dev/null +++ b/compat/zlib/examples/gzappend.c @@ -0,0 +1,504 @@ +/* gzappend -- command to append to a gzip file + + Copyright (C) 2003, 2012 Mark Adler, all rights reserved + version 1.2, 11 Oct 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* + * Change history: + * + * 1.0 19 Oct 2003 - First version + * 1.1 4 Nov 2003 - Expand and clarify some comments and notes + * - Add version and copyright to help + * - Send help to stdout instead of stderr + * - Add some preemptive typecasts + * - Add L to constants in lseek() calls + * - Remove some debugging information in error messages + * - Use new data_type definition for zlib 1.2.1 + * - Simplfy and unify file operations + * - Finish off gzip file in gztack() + * - Use deflatePrime() instead of adding empty blocks + * - Keep gzip file clean on appended file read errors + * - Use in-place rotate instead of auxiliary buffer + * (Why you ask? Because it was fun to write!) + * 1.2 11 Oct 2012 - Fix for proper z_const usage + * - Check for input buffer malloc failure + */ + +/* + gzappend takes a gzip file and appends to it, compressing files from the + command line or data from stdin. The gzip file is written to directly, to + avoid copying that file, in case it's large. Note that this results in the + unfriendly behavior that if gzappend fails, the gzip file is corrupted. + + This program was written to illustrate the use of the new Z_BLOCK option of + zlib 1.2.x's inflate() function. This option returns from inflate() at each + block boundary to facilitate locating and modifying the last block bit at + the start of the final deflate block. Also whether using Z_BLOCK or not, + another required feature of zlib 1.2.x is that inflate() now provides the + number of unusued bits in the last input byte used. gzappend will not work + with versions of zlib earlier than 1.2.1. + + gzappend first decompresses the gzip file internally, discarding all but + the last 32K of uncompressed data, and noting the location of the last block + bit and the number of unused bits in the last byte of the compressed data. + The gzip trailer containing the CRC-32 and length of the uncompressed data + is verified. This trailer will be later overwritten. + + Then the last block bit is cleared by seeking back in the file and rewriting + the byte that contains it. Seeking forward, the last byte of the compressed + data is saved along with the number of unused bits to initialize deflate. + + A deflate process is initialized, using the last 32K of the uncompressed + data from the gzip file to initialize the dictionary. If the total + uncompressed data was less than 32K, then all of it is used to initialize + the dictionary. The deflate output bit buffer is also initialized with the + last bits from the original deflate stream. From here on, the data to + append is simply compressed using deflate, and written to the gzip file. + When that is complete, the new CRC-32 and uncompressed length are written + as the trailer of the gzip file. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <fcntl.h> +#include <unistd.h> +#include "zlib.h" + +#define local static +#define LGCHUNK 14 +#define CHUNK (1U << LGCHUNK) +#define DSIZE 32768U + +/* print an error message and terminate with extreme prejudice */ +local void bye(char *msg1, char *msg2) +{ + fprintf(stderr, "gzappend error: %s%s\n", msg1, msg2); + exit(1); +} + +/* return the greatest common divisor of a and b using Euclid's algorithm, + modified to be fast when one argument much greater than the other, and + coded to avoid unnecessary swapping */ +local unsigned gcd(unsigned a, unsigned b) +{ + unsigned c; + + while (a && b) + if (a > b) { + c = b; + while (a - c >= c) + c <<= 1; + a -= c; + } + else { + c = a; + while (b - c >= c) + c <<= 1; + b -= c; + } + return a + b; +} + +/* rotate list[0..len-1] left by rot positions, in place */ +local void rotate(unsigned char *list, unsigned len, unsigned rot) +{ + unsigned char tmp; + unsigned cycles; + unsigned char *start, *last, *to, *from; + + /* normalize rot and handle degenerate cases */ + if (len < 2) return; + if (rot >= len) rot %= len; + if (rot == 0) return; + + /* pointer to last entry in list */ + last = list + (len - 1); + + /* do simple left shift by one */ + if (rot == 1) { + tmp = *list; + memcpy(list, list + 1, len - 1); + *last = tmp; + return; + } + + /* do simple right shift by one */ + if (rot == len - 1) { + tmp = *last; + memmove(list + 1, list, len - 1); + *list = tmp; + return; + } + + /* otherwise do rotate as a set of cycles in place */ + cycles = gcd(len, rot); /* number of cycles */ + do { + start = from = list + cycles; /* start index is arbitrary */ + tmp = *from; /* save entry to be overwritten */ + for (;;) { + to = from; /* next step in cycle */ + from += rot; /* go right rot positions */ + if (from > last) from -= len; /* (pointer better not wrap) */ + if (from == start) break; /* all but one shifted */ + *to = *from; /* shift left */ + } + *to = tmp; /* complete the circle */ + } while (--cycles); +} + +/* structure for gzip file read operations */ +typedef struct { + int fd; /* file descriptor */ + int size; /* 1 << size is bytes in buf */ + unsigned left; /* bytes available at next */ + unsigned char *buf; /* buffer */ + z_const unsigned char *next; /* next byte in buffer */ + char *name; /* file name for error messages */ +} file; + +/* reload buffer */ +local int readin(file *in) +{ + int len; + + len = read(in->fd, in->buf, 1 << in->size); + if (len == -1) bye("error reading ", in->name); + in->left = (unsigned)len; + in->next = in->buf; + return len; +} + +/* read from file in, exit if end-of-file */ +local int readmore(file *in) +{ + if (readin(in) == 0) bye("unexpected end of ", in->name); + return 0; +} + +#define read1(in) (in->left == 0 ? readmore(in) : 0, \ + in->left--, *(in->next)++) + +/* skip over n bytes of in */ +local void skip(file *in, unsigned n) +{ + unsigned bypass; + + if (n > in->left) { + n -= in->left; + bypass = n & ~((1U << in->size) - 1); + if (bypass) { + if (lseek(in->fd, (off_t)bypass, SEEK_CUR) == -1) + bye("seeking ", in->name); + n -= bypass; + } + readmore(in); + if (n > in->left) + bye("unexpected end of ", in->name); + } + in->left -= n; + in->next += n; +} + +/* read a four-byte unsigned integer, little-endian, from in */ +unsigned long read4(file *in) +{ + unsigned long val; + + val = read1(in); + val += (unsigned)read1(in) << 8; + val += (unsigned long)read1(in) << 16; + val += (unsigned long)read1(in) << 24; + return val; +} + +/* skip over gzip header */ +local void gzheader(file *in) +{ + int flags; + unsigned n; + + if (read1(in) != 31 || read1(in) != 139) bye(in->name, " not a gzip file"); + if (read1(in) != 8) bye("unknown compression method in", in->name); + flags = read1(in); + if (flags & 0xe0) bye("unknown header flags set in", in->name); + skip(in, 6); + if (flags & 4) { + n = read1(in); + n += (unsigned)(read1(in)) << 8; + skip(in, n); + } + if (flags & 8) while (read1(in) != 0) ; + if (flags & 16) while (read1(in) != 0) ; + if (flags & 2) skip(in, 2); +} + +/* decompress gzip file "name", return strm with a deflate stream ready to + continue compression of the data in the gzip file, and return a file + descriptor pointing to where to write the compressed data -- the deflate + stream is initialized to compress using level "level" */ +local int gzscan(char *name, z_stream *strm, int level) +{ + int ret, lastbit, left, full; + unsigned have; + unsigned long crc, tot; + unsigned char *window; + off_t lastoff, end; + file gz; + + /* open gzip file */ + gz.name = name; + gz.fd = open(name, O_RDWR, 0); + if (gz.fd == -1) bye("cannot open ", name); + gz.buf = malloc(CHUNK); + if (gz.buf == NULL) bye("out of memory", ""); + gz.size = LGCHUNK; + gz.left = 0; + + /* skip gzip header */ + gzheader(&gz); + + /* prepare to decompress */ + window = malloc(DSIZE); + if (window == NULL) bye("out of memory", ""); + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; + strm->opaque = Z_NULL; + ret = inflateInit2(strm, -15); + if (ret != Z_OK) bye("out of memory", " or library mismatch"); + + /* decompress the deflate stream, saving append information */ + lastbit = 0; + lastoff = lseek(gz.fd, 0L, SEEK_CUR) - gz.left; + left = 0; + strm->avail_in = gz.left; + strm->next_in = gz.next; + crc = crc32(0L, Z_NULL, 0); + have = full = 0; + do { + /* if needed, get more input */ + if (strm->avail_in == 0) { + readmore(&gz); + strm->avail_in = gz.left; + strm->next_in = gz.next; + } + + /* set up output to next available section of sliding window */ + strm->avail_out = DSIZE - have; + strm->next_out = window + have; + + /* inflate and check for errors */ + ret = inflate(strm, Z_BLOCK); + if (ret == Z_STREAM_ERROR) bye("internal stream error!", ""); + if (ret == Z_MEM_ERROR) bye("out of memory", ""); + if (ret == Z_DATA_ERROR) + bye("invalid compressed data--format violated in", name); + + /* update crc and sliding window pointer */ + crc = crc32(crc, window + have, DSIZE - have - strm->avail_out); + if (strm->avail_out) + have = DSIZE - strm->avail_out; + else { + have = 0; + full = 1; + } + + /* process end of block */ + if (strm->data_type & 128) { + if (strm->data_type & 64) + left = strm->data_type & 0x1f; + else { + lastbit = strm->data_type & 0x1f; + lastoff = lseek(gz.fd, 0L, SEEK_CUR) - strm->avail_in; + } + } + } while (ret != Z_STREAM_END); + inflateEnd(strm); + gz.left = strm->avail_in; + gz.next = strm->next_in; + + /* save the location of the end of the compressed data */ + end = lseek(gz.fd, 0L, SEEK_CUR) - gz.left; + + /* check gzip trailer and save total for deflate */ + if (crc != read4(&gz)) + bye("invalid compressed data--crc mismatch in ", name); + tot = strm->total_out; + if ((tot & 0xffffffffUL) != read4(&gz)) + bye("invalid compressed data--length mismatch in", name); + + /* if not at end of file, warn */ + if (gz.left || readin(&gz)) + fprintf(stderr, + "gzappend warning: junk at end of gzip file overwritten\n"); + + /* clear last block bit */ + lseek(gz.fd, lastoff - (lastbit != 0), SEEK_SET); + if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name); + *gz.buf = (unsigned char)(*gz.buf ^ (1 << ((8 - lastbit) & 7))); + lseek(gz.fd, -1L, SEEK_CUR); + if (write(gz.fd, gz.buf, 1) != 1) bye("writing after seek to ", name); + + /* if window wrapped, build dictionary from window by rotating */ + if (full) { + rotate(window, DSIZE, have); + have = DSIZE; + } + + /* set up deflate stream with window, crc, total_in, and leftover bits */ + ret = deflateInit2(strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY); + if (ret != Z_OK) bye("out of memory", ""); + deflateSetDictionary(strm, window, have); + strm->adler = crc; + strm->total_in = tot; + if (left) { + lseek(gz.fd, --end, SEEK_SET); + if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name); + deflatePrime(strm, 8 - left, *gz.buf); + } + lseek(gz.fd, end, SEEK_SET); + + /* clean up and return */ + free(window); + free(gz.buf); + return gz.fd; +} + +/* append file "name" to gzip file gd using deflate stream strm -- if last + is true, then finish off the deflate stream at the end */ +local void gztack(char *name, int gd, z_stream *strm, int last) +{ + int fd, len, ret; + unsigned left; + unsigned char *in, *out; + + /* open file to compress and append */ + fd = 0; + if (name != NULL) { + fd = open(name, O_RDONLY, 0); + if (fd == -1) + fprintf(stderr, "gzappend warning: %s not found, skipping ...\n", + name); + } + + /* allocate buffers */ + in = malloc(CHUNK); + out = malloc(CHUNK); + if (in == NULL || out == NULL) bye("out of memory", ""); + + /* compress input file and append to gzip file */ + do { + /* get more input */ + len = read(fd, in, CHUNK); + if (len == -1) { + fprintf(stderr, + "gzappend warning: error reading %s, skipping rest ...\n", + name); + len = 0; + } + strm->avail_in = (unsigned)len; + strm->next_in = in; + if (len) strm->adler = crc32(strm->adler, in, (unsigned)len); + + /* compress and write all available output */ + do { + strm->avail_out = CHUNK; + strm->next_out = out; + ret = deflate(strm, last && len == 0 ? Z_FINISH : Z_NO_FLUSH); + left = CHUNK - strm->avail_out; + while (left) { + len = write(gd, out + CHUNK - strm->avail_out - left, left); + if (len == -1) bye("writing gzip file", ""); + left -= (unsigned)len; + } + } while (strm->avail_out == 0 && ret != Z_STREAM_END); + } while (len != 0); + + /* write trailer after last entry */ + if (last) { + deflateEnd(strm); + out[0] = (unsigned char)(strm->adler); + out[1] = (unsigned char)(strm->adler >> 8); + out[2] = (unsigned char)(strm->adler >> 16); + out[3] = (unsigned char)(strm->adler >> 24); + out[4] = (unsigned char)(strm->total_in); + out[5] = (unsigned char)(strm->total_in >> 8); + out[6] = (unsigned char)(strm->total_in >> 16); + out[7] = (unsigned char)(strm->total_in >> 24); + len = 8; + do { + ret = write(gd, out + 8 - len, len); + if (ret == -1) bye("writing gzip file", ""); + len -= ret; + } while (len); + close(gd); + } + + /* clean up and return */ + free(out); + free(in); + if (fd > 0) close(fd); +} + +/* process the compression level option if present, scan the gzip file, and + append the specified files, or append the data from stdin if no other file + names are provided on the command line -- the gzip file must be writable + and seekable */ +int main(int argc, char **argv) +{ + int gd, level; + z_stream strm; + + /* ignore command name */ + argc--; argv++; + + /* provide usage if no arguments */ + if (*argv == NULL) { + printf( + "gzappend 1.2 (11 Oct 2012) Copyright (C) 2003, 2012 Mark Adler\n" + ); + printf( + "usage: gzappend [-level] file.gz [ addthis [ andthis ... ]]\n"); + return 0; + } + + /* set compression level */ + level = Z_DEFAULT_COMPRESSION; + if (argv[0][0] == '-') { + if (argv[0][1] < '0' || argv[0][1] > '9' || argv[0][2] != 0) + bye("invalid compression level", ""); + level = argv[0][1] - '0'; + if (*++argv == NULL) bye("no gzip file name after options", ""); + } + + /* prepare to append to gzip file */ + gd = gzscan(*argv++, &strm, level); + + /* append files on command line, or from stdin if none */ + if (*argv == NULL) + gztack(NULL, gd, &strm, 1); + else + do { + gztack(*argv, gd, &strm, argv[1] == NULL); + } while (*++argv != NULL); + return 0; +} |