diff options
Diffstat (limited to 'doc/LinkVar.3')
| -rw-r--r-- | doc/LinkVar.3 | 78 |
1 files changed, 28 insertions, 50 deletions
diff --git a/doc/LinkVar.3 b/doc/LinkVar.3 index c80d30d..9c13008 100644 --- a/doc/LinkVar.3 +++ b/doc/LinkVar.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_LinkVar 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS @@ -31,14 +31,20 @@ Name of global variable. Address of C variable that is to be linked to \fIvarName\fR. .AP int type in Type of C variable. Must be one of \fBTCL_LINK_INT\fR, +.VS 8.5 \fBTCL_LINK_UINT\fR, \fBTCL_LINK_CHAR\fR, \fBTCL_LINK_UCHAR\fR, \fBTCL_LINK_SHORT\fR, \fBTCL_LINK_USHORT\fR, \fBTCL_LINK_LONG\fR, -\fBTCL_LINK_ULONG\fR, \fBTCL_LINK_WIDE_INT\fR, +\fBTCL_LINK_ULONG\fR, +.VE 8.5 +\fBTCL_LINK_WIDE_INT\fR, +.VS 8.5 \fBTCL_LINK_WIDE_UINT\fR, \fBTCL_LINK_FLOAT\fR, +.VE 8.5 \fBTCL_LINK_DOUBLE\fR, \fBTCL_LINK_BOOLEAN\fR, or \fBTCL_LINK_STRING\fR, optionally OR'ed with \fBTCL_LINK_READ_ONLY\fR to make Tcl variable read-only. .BE + .SH DESCRIPTION .PP \fBTcl_LinkVar\fR uses variable traces to keep the Tcl variable @@ -61,9 +67,8 @@ The C variable is of type \fBint\fR. Any value written into the Tcl variable must have a proper integer form acceptable to \fBTcl_GetIntFromObj\fR; attempts to write non-integer values into \fIvarName\fR will be rejected with -Tcl errors. Incomplete integer representations (like the empty -string, '+', '-' or the hex/octal/binary prefix) are accepted -as if they are valid too. +Tcl errors. +.VS 8.5 .TP \fBTCL_LINK_UINT\fR The C variable is of type \fBunsigned int\fR. @@ -71,18 +76,14 @@ Any value written into the Tcl variable must have a proper unsigned integer form acceptable to \fBTcl_GetWideIntFromObj\fR and in the platform's defined range for the \fBunsigned int\fR type; attempts to write non-integer values (or values outside the range) into -\fIvarName\fR will be rejected with Tcl errors. Incomplete integer -representations (like the empty string, '+', '-' or the hex/octal/binary -prefix) are accepted as if they are valid too. +\fIvarName\fR will be rejected with Tcl errors. .TP \fBTCL_LINK_CHAR\fR The C variable is of type \fBchar\fR. Any value written into the Tcl variable must have a proper integer form acceptable to \fBTcl_GetIntFromObj\fR and be in the range of the \fBchar\fR datatype; attempts to write non-integer or out-of-range -values into \fIvarName\fR will be rejected with Tcl errors. Incomplete -integer representations (like the empty string, '+', '-' or the -hex/octal/binary prefix) are accepted as if they are valid too. +values into \fIvarName\fR will be rejected with Tcl errors. .TP \fBTCL_LINK_UCHAR\fR The C variable is of type \fBunsigned char\fR. @@ -90,18 +91,14 @@ Any value written into the Tcl variable must have a proper unsigned integer form acceptable to \fBTcl_GetIntFromObj\fR and in the platform's defined range for the \fBunsigned char\fR type; attempts to write non-integer values (or values outside the range) into -\fIvarName\fR will be rejected with Tcl errors. Incomplete integer -representations (like the empty string, '+', '-' or the hex/octal/binary -prefix) are accepted as if they are valid too. +\fIvarName\fR will be rejected with Tcl errors. .TP \fBTCL_LINK_SHORT\fR The C variable is of type \fBshort\fR. Any value written into the Tcl variable must have a proper integer form acceptable to \fBTcl_GetIntFromObj\fR and be in the range of the \fBshort\fR datatype; attempts to write non-integer or out-of-range -values into \fIvarName\fR will be rejected with Tcl errors. Incomplete -integer representations (like the empty string, '+', '-' or the -hex/octal/binary prefix) are accepted as if they are valid too. +values into \fIvarName\fR will be rejected with Tcl errors. .TP \fBTCL_LINK_USHORT\fR The C variable is of type \fBunsigned short\fR. @@ -109,18 +106,14 @@ Any value written into the Tcl variable must have a proper unsigned integer form acceptable to \fBTcl_GetIntFromObj\fR and in the platform's defined range for the \fBunsigned short\fR type; attempts to write non-integer values (or values outside the range) into -\fIvarName\fR will be rejected with Tcl errors. Incomplete integer -representations (like the empty string, '+', '-' or the hex/octal/binary -prefix) are accepted as if they are valid too. +\fIvarName\fR will be rejected with Tcl errors. .TP \fBTCL_LINK_LONG\fR The C variable is of type \fBlong\fR. Any value written into the Tcl variable must have a proper integer form acceptable to \fBTcl_GetLongFromObj\fR; attempts to write non-integer or out-of-range -values into \fIvarName\fR will be rejected with Tcl errors. Incomplete -integer representations (like the empty string, '+', '-' or the -hex/octal/binary prefix) are accepted as if they are valid too. +values into \fIvarName\fR will be rejected with Tcl errors. .TP \fBTCL_LINK_ULONG\fR The C variable is of type \fBunsigned long\fR. @@ -128,18 +121,16 @@ Any value written into the Tcl variable must have a proper unsigned integer form acceptable to \fBTcl_GetWideIntFromObj\fR and in the platform's defined range for the \fBunsigned long\fR type; attempts to write non-integer values (or values outside the range) into -\fIvarName\fR will be rejected with Tcl errors. Incomplete integer -representations (like the empty string, '+', '-' or the hex/octal/binary -prefix) are accepted as if they are valid too. +\fIvarName\fR will be rejected with Tcl errors. +.VE 8.5 .TP \fBTCL_LINK_DOUBLE\fR The C variable is of type \fBdouble\fR. Any value written into the Tcl variable must have a proper real form acceptable to \fBTcl_GetDoubleFromObj\fR; attempts to write non-real values into \fIvarName\fR will be rejected with -Tcl errors. Incomplete integer or real representations (like the -empty string, '.', '+', '-' or the hex/octal/binary prefix) are -accepted as if they are valid too. +Tcl errors. +.VS 8.5 .TP \fBTCL_LINK_FLOAT\fR The C variable is of type \fBfloat\fR. @@ -147,9 +138,8 @@ Any value written into the Tcl variable must have a proper real form acceptable to \fBTcl_GetDoubleFromObj\fR and must be within the range acceptable for a \fBfloat\fR; attempts to write non-real values (or values outside the range) into -\fIvarName\fR will be rejected with Tcl errors. Incomplete integer -or real representations (like the empty string, '.', '+', '-' or -the hex/octal/binary prefix) are accepted as if they are valid too. +\fIvarName\fR will be rejected with Tcl errors. +.VE 8.5 .TP \fBTCL_LINK_WIDE_INT\fR The C variable is of type \fBTcl_WideInt\fR (which is an integer type @@ -157,9 +147,8 @@ at least 64-bits wide on all platforms that can support it.) Any value written into the Tcl variable must have a proper integer form acceptable to \fBTcl_GetWideIntFromObj\fR; attempts to write non-integer values into \fIvarName\fR will be rejected with -Tcl errors. Incomplete integer representations (like the empty -string, '+', '-' or the hex/octal/binary prefix) are accepted -as if they are valid too. +Tcl errors. +.VS 8.5 .TP \fBTCL_LINK_WIDE_UINT\fR The C variable is of type \fBTcl_WideUInt\fR (which is an unsigned @@ -170,9 +159,8 @@ integer form acceptable to \fBTcl_GetWideIntFromObj\fR (it will be cast to unsigned); .\" FIXME! Use bignums instead. attempts to write non-integer values into \fIvarName\fR will be -rejected with Tcl errors. Incomplete integer representations (like -the empty string, '+', '-' or the hex/octal/binary prefix) are accepted -as if they are valid too. +rejected with Tcl errors. +.VE 8.5 .TP \fBTCL_LINK_BOOLEAN\fR The C variable is of type \fBint\fR. @@ -216,16 +204,6 @@ Tk widget that wishes to display the value of the variable), the trace will not trigger when the C variable has changed. \fBTcl_UpdateLinkedVar\fR ensures that any traces on the Tcl variable are invoked. -.PP -Note that, as with any call to a Tcl interpreter, \fBTcl_UpdateLinkedVar\fR -must be called from the same thread that created the interpreter. The safest -mechanism is to ensure that the C variable is only ever updated from the same -thread that created the interpreter (possibly in response to an event posted -with \fBTcl_ThreadQueueEvent\fR), but when it is necessary to update the -variable in a separate thread, it is advised that \fBTcl_AsyncMark\fR be used -to indicate to the thread hosting the interpreter that it is ready to run -\fBTcl_UpdateLinkedVar\fR. -.SH "SEE ALSO" -Tcl_TraceVar(3) + .SH KEYWORDS -boolean, integer, link, read-only, real, string, trace, variable +boolean, integer, link, read-only, real, string, traces, variable |