summaryrefslogtreecommitdiffstats
path: root/doc/SetVar.3
diff options
context:
space:
mode:
Diffstat (limited to 'doc/SetVar.3')
-rw-r--r--doc/SetVar.3211
1 files changed, 134 insertions, 77 deletions
diff --git a/doc/SetVar.3 b/doc/SetVar.3
index 70100f4..bb07005 100644
--- a/doc/SetVar.3
+++ b/doc/SetVar.3
@@ -5,93 +5,158 @@
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
-'\" RCS: @(#) $Id: SetVar.3,v 1.2 1998/09/14 18:39:50 stanton Exp $
+'\" RCS: @(#) $Id: SetVar.3,v 1.3 1999/04/16 00:46:33 stanton Exp $
'\"
.so man.macros
-.TH Tcl_SetVar 3 7.4 Tcl "Tcl Library Procedures"
+.TH Tcl_SetVar 3 8.1 Tcl "Tcl Library Procedures"
.BS
.SH NAME
-Tcl_SetVar, Tcl_SetVar2, Tcl_GetVar, Tcl_GetVar2, Tcl_UnsetVar, Tcl_UnsetVar2 \- manipulate Tcl variables
+Tcl_SetVar2Ex, Tcl_SetVar, Tcl_SetVar2, Tcl_ObjSetVar2, Tcl_GetVar2Ex, Tcl_GetVar, Tcl_GetVar2, Tcl_ObjGetVar2, Tcl_UnsetVar, Tcl_UnsetVar2 \- manipulate Tcl variables
.SH SYNOPSIS
.nf
\fB#include <tcl.h>\fR
.sp
+.VS 8.1
+Tcl_Obj *
+\fBTcl_SetVar2Ex\fR(\fIinterp, name1, name2, newValuePtr, flags\fR)
+.VE
+.sp
char *
\fBTcl_SetVar\fR(\fIinterp, varName, newValue, flags\fR)
.sp
char *
\fBTcl_SetVar2\fR(\fIinterp, name1, name2, newValue, flags\fR)
.sp
+Tcl_Obj *
+\fBTcl_ObjSetVar2\fR(\fIinterp, part1Ptr, part2Ptr, newValuePtr, flags\fR)
+.sp
+.VS 8.1
+Tcl_Obj *
+\fBTcl_GetVar2Ex\fR(\fIinterp, name1, name2, flags\fR)
+.VE
+.sp
char *
\fBTcl_GetVar\fR(\fIinterp, varName, flags\fR)
.sp
char *
\fBTcl_GetVar2\fR(\fIinterp, name1, name2, flags\fR)
.sp
+Tcl_Obj *
+\fBTcl_ObjGetVar2\fR(\fIinterp, part1Ptr, part2Ptr, flags\fR)
+.sp
int
\fBTcl_UnsetVar\fR(\fIinterp, varName, flags\fR)
.sp
int
\fBTcl_UnsetVar2\fR(\fIinterp, name1, name2, flags\fR)
.SH ARGUMENTS
-.AS Tcl_Interp *newValue
+.AS Tcl_Interp *newValuePtr
.AP Tcl_Interp *interp in
Interpreter containing variable.
+.AP char *name1 in
+Contains the name of an array variable (if \fIname2\fR is non-NULL)
+or (if \fIname2\fR is NULL) either the name of a scalar variable
+or a complete name including both variable name and index.
+May include \fB::\fR namespace qualifiers
+to specify a variable in a particular namespace.
+.AP char *name2 in
+If non-NULL, gives name of element within array; in this
+case \fIname1\fR must refer to an array variable.
+.AP Tcl_Obj *newValuePtr in
+.VS 8.1
+Points to a Tcl object containing the new value for the variable.
+.VE
+.AP int flags in
+OR-ed combination of bits providing additional information. See below
+for valid values.
.AP char *varName in
Name of variable.
-May include a series of \fB::\fR namespace qualifiers
+May include \fB::\fR namespace qualifiers
to specify a variable in a particular namespace.
May refer to a scalar variable or an element of
-an array variable.
-If the name references an element of an array, then it
+an array.
+If the name references an element of an array, then the name
must be in writable memory: Tcl will make temporary modifications
to it while looking up the name.
.AP char *newValue in
-New value for variable.
-.AP int flags in
-OR-ed combination of bits providing additional information for
-operation. See below for valid values.
-.AP char *name1 in
-Name of scalar variable, or name of array variable if \fIname2\fR
-is non-NULL.
-May include a series of \fB::\fR namespace qualifiers
+New value for variable, specified as a NULL-terminated string.
+A copy of this value is stored in the variable.
+.AP Tcl_Obj *part1Ptr in
+Points to a Tcl object containing the variable's name.
+The name may include a series of \fB::\fR namespace qualifiers
to specify a variable in a particular namespace.
-.AP char *name2 in
-If non-NULL, gives name of element within array and \fIname1\fR
-must refer to an array variable.
+May refer to a scalar variable or an element of an array variable.
+.AP Tcl_Obj *part2Ptr in
+If non-NULL, points to an object containing the name of an element
+within an array and \fIpart1Ptr\fR must refer to an array variable.
.BE
.SH DESCRIPTION
.PP
-These procedures may be used to create, modify, read, and delete
+These procedures are used to create, modify, read, and delete
Tcl variables from C code.
.PP
-Note that \fBTcl_GetVar\fR and \fBTcl_SetVar\fR
-have been largely replaced by the
-object-based procedures \fBTcl_ObjGetVar2\fR and \fBTcl_ObjSetVar2\fR.
-Those object-based procedures read, modify, and create
-a variable whose name is held in a Tcl object instead of a string.
-They also return a pointer to the object
-which is the variable's value instead of returning a string.
-Operations on objects can be faster since objects
-hold an internal representation that can be manipulated more efficiently.
-.PP
-\fBTcl_SetVar\fR and \fBTcl_SetVar2\fR
+.VS 8.1
+\fBTcl_SetVar2Ex\fR, \fBTcl_SetVar\fR, \fBTcl_SetVar2\fR, and
+\fBTcl_ObjSetVar2\fR
will create a new variable or modify an existing one.
-Both of these procedures set the given variable to the value
-given by \fInewValue\fR, and they return a pointer to a
-copy of the variable's new value, which is stored in Tcl's
+These procedures set the given variable to the value
+given by \fInewValuePtr\fR or \fInewValue\fR and return a
+pointer to the variable's new value, which is stored in Tcl's
variable structure.
-Tcl keeps a private copy of the variable's value, so the caller
-may change \fInewValue\fR after these procedures return without
-affecting the value of the variable.
+\fBTcl_SetVar2Ex\fR and \fBTcl_ObjSetVar2\fR take the new value as a
+Tcl_Obj and return
+a pointer to a Tcl_Obj. \fBTcl_SetVar\fR and \fBTcl_SetVar2\fR
+take the new value as a string and return a string; they are
+usually less efficient than \fBTcl_ObjSetVar2\fR. Note that the
+return value may be different than the \fInewValuePtr\fR or
+.VE
+\fInewValue\fR argument, due to modifications made by write traces.
If an error occurs in setting the variable (e.g. an array
-variable is referenced without giving an index into the array),
-they return NULL.
+variable is referenced without giving an index into the array)
+NULL is returned and an error message is left in \fIinterp\fR's
+result if the \fBTCL_LEAVE_ERR_MSG\fR \fIflag\fR bit is set.
+.PP
+.VS 8.1
+\fBTcl_GetVar2Ex\fR, \fBTcl_GetVar\fR, \fBTcl_GetVar2\fR, and
+\fBTcl_ObjGetVar2\fR
+return the current value of a variable.
+The arguments to these procedures are treated in the same way
+as the arguments to the procedures described above.
+Under normal circumstances, the return value is a pointer
+to the variable's value. For \fBTcl_GetVar2Ex\fR and
+\fBTcl_ObjGetVar2\fR the value is
+returned as a pointer to a Tcl_Obj. For \fBTcl_GetVar\fR and
+\fBTcl_GetVar2\fR the value is returned as a string; this is
+usually less efficient, so \fBTcl_GetVar2Ex\fR or \fBTcl_ObjGetVar2\fR
+are preferred.
+.VE
+If an error occurs while reading the variable (e.g. the variable
+doesn't exist or an array element is specified for a scalar
+variable), then NULL is returned and an error message is left
+in \fIinterp\fR's result if the \fBTCL_LEAVE_ERR_MSG\fR \fIflag\fR
+bit is set.
.PP
-The name of the variable may be specified to
-\fBTcl_SetVar\fR and \fBTcl_SetVar2\fR in either of two ways.
-If \fBTcl_SetVar\fR is called, the variable name is given as
+\fBTcl_UnsetVar\fR and \fBTcl_UnsetVar2\fR may be used to remove
+a variable, so that future attempts to read the variable will return
+an error.
+The arguments to these procedures are treated in the same way
+as the arguments to the procedures above.
+If the variable is successfully removed then TCL_OK is returned.
+If the variable cannot be removed because it doesn't exist then
+TCL_ERROR is returned and an error message is left
+in \fIinterp\fR's result if the \fBTCL_LEAVE_ERR_MSG\fR \fIflag\fR
+bit is set.
+If an array element is specified, the given element is removed
+but the array remains.
+If an array name is specified without an index, then the entire
+array is removed.
+.PP
+The name of a variable may be specified to these procedures in
+four ways:
+.IP [1]
+If \fBTcl_SetVar\fR, \fBTcl_GetVar\fR, or \fBTcl_UnsetVar\fR
+is invoked, the variable name is given as
a single string, \fIvarName\fR.
If \fIvarName\fR contains an open parenthesis and ends with a
close parenthesis, then the value between the parentheses is
@@ -100,22 +165,31 @@ the characters before the first open
parenthesis are treated as the name of an array variable.
If \fIvarName\fR doesn't have parentheses as described above, then
the entire string is treated as the name of a scalar variable.
-If \fBTcl_SetVar2\fR is called, then the array name and index
-have been separated by the caller into two separate strings,
-\fIname1\fR and \fIname2\fR respectively; if \fIname2\fR is
-zero it means that a scalar variable is being referenced.
+.IP [2]
+If the \fIname1\fR and \fIname2\fR arguments are provided and
+\fIname2\fR is non-NULL, then an array element is specified and
+the array name and index have
+already been separated by the caller: \fIname1\fR contains the
+name and \fIname2\fR contains the index.
+.VS 8.1
+An error is generated
+if \fIname1\fR contains an open parenthesis and ends with a
+close parenthesis (array element) and \fIname2\fR is non-NULL.
+.IP [3]
+If \fIname2\fR is NULL, \fIname1\fR is treated just like
+\fIvarName\fR in case [1] above (it can be either a scalar or an array
+element variable name).
+.VE
.PP
The \fIflags\fR argument may be used to specify any of several
options to the procedures.
It consists of an OR-ed combination of the following bits.
-Note that the flag bit TCL_PARSE_PART1 is only meaningful
-for the procedures Tcl_SetVar2 and Tcl_GetVar2.
.TP
\fBTCL_GLOBAL_ONLY\fR
-Under normal circumstances the procedures look up variables as follows:
+Under normal circumstances the procedures look up variables as follows.
If a procedure call is active in \fIinterp\fR,
-a variable is looked up at the current level of procedure call.
-Otherwise, a variable is looked up first in the current namespace,
+the variable is looked up at the current level of procedure call.
+Otherwise, the variable is looked up first in the current namespace,
then in the global namespace.
However, if this bit is set in \fIflags\fR then the variable
is looked up only in the global namespace
@@ -124,14 +198,10 @@ If both \fBTCL_GLOBAL_ONLY\fR and \fBTCL_NAMESPACE_ONLY\fR are given,
\fBTCL_GLOBAL_ONLY\fR is ignored.
.TP
\fBTCL_NAMESPACE_ONLY\fR
-Under normal circumstances the procedures look up variables as follows:
-If a procedure call is active in \fIinterp\fR,
-a variable is looked up at the current level of procedure call.
-Otherwise, a variable is looked up first in the current namespace,
-then in the global namespace.
-However, if this bit is set in \fIflags\fR then the variable
-is looked up only in the current namespace
-even if there is a procedure call active.
+If this bit is set in \fIflags\fR then the variable
+is looked up only in the current namespace; if a procedure is active
+its variables are ignored, and the global namespace is also ignored unless
+it is the current namespace.
.TP
\fBTCL_LEAVE_ERR_MSG\fR
If an error is returned and this bit is set in \fIflags\fR, then
@@ -142,9 +212,10 @@ If this flag bit isn't set then no error message is left
and the interpreter's result will not be modified.
.TP
\fBTCL_APPEND_VALUE\fR
-If this bit is set then \fInewValue\fR is appended to the current
-value, instead of replacing it.
-If the variable is currently undefined, then this bit is ignored.
+If this bit is set then \fInewValuePtr\fR or \fInewValue\fR is
+appended to the current value instead of replacing it.
+If the variable is currently undefined, then the bit is ignored.
+This bit is only used by the \fBTcl_Set*\fR procedures.
.TP
\fBTCL_LIST_ELEMENT\fR
If this bit is set, then \fInewValue\fR is converted to a valid
@@ -153,18 +224,6 @@ A separator space is appended before the new list element unless
the list element is going to be the first element in a list or
sublist (i.e. the variable's current value is empty, or contains
the single character ``{'', or ends in `` }'').
-.TP
-\fBTCL_PARSE_PART1\fR
-If this bit is set when calling \fITcl_SetVar2\fR and \fITcl_GetVar2\fR,
-\fIname1\fR may contain both an array and an element name:
-if the name contains an open parenthesis and ends with a
-close parenthesis, then the value between the parentheses is
-treated as an element name (which can have any string value) and
-the characters before the first open
-parenthesis are treated as the name of an array variable.
-If the flag TCL_PARSE_PART1 is given,
-\fIname2\fR should be NULL since the array and element names
-are taken from \fIname1\fR.
.PP
\fBTcl_GetVar\fR and \fBTcl_GetVar2\fR
return the current value of a variable.
@@ -178,8 +237,6 @@ or \fBTcl_SetVar2\fR).
and TCL_LEAVE_ERR_MSG, both of
which have
the same meaning as for \fBTcl_SetVar\fR.
-In addition, \fBTcl_GetVar2\fR uses the bit TCL_PARSE_PART1,
-which has the same meaning as for \fBTcl_SetVar2\fR.
If an error occurs in reading the variable (e.g. the variable
doesn't exist or an array element is specified for a scalar
variable), then NULL is returned.
@@ -198,7 +255,7 @@ If an array name is specified without an index, then the entire
array is removed.
.SH "SEE ALSO"
-Tcl_GetObjResult, Tcl_GetStringResult, Tcl_ObjGetVar2, Tcl_ObjSetVar2, Tcl_TraceVar
+Tcl_GetObjResult, Tcl_GetStringResult, Tcl_TraceVar
.SH KEYWORDS
-array, interpreter, object, scalar, set, unset, variable
+array, get variable, interpreter, object, scalar, set, unset, variable