diff options
Diffstat (limited to 'doc/TclZlib.3')
| -rw-r--r-- | doc/TclZlib.3 | 248 |
1 files changed, 248 insertions, 0 deletions
diff --git a/doc/TclZlib.3 b/doc/TclZlib.3 new file mode 100644 index 0000000..1b5e892 --- /dev/null +++ b/doc/TclZlib.3 @@ -0,0 +1,248 @@ +'\" +'\" Copyright (c) 2008 Donal K. Fellows +'\" +'\" See the file "license.terms" for information on usage and redistribution +'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. +'\" +.so man.macros +.TH TclZlib 3 8.6 Tcl "Tcl Library Procedures" +.BS +'\" Note: do not modify the .SH NAME line immediately below! +.SH NAME +Tcl_ZlibAdler32, Tcl_ZlibCRC32, Tcl_ZlibDeflate, Tcl_ZlibInflate, Tcl_ZlibStreamChecksum, Tcl_ZlibStreamClose, Tcl_ZlibStreamEof, Tcl_ZlibStreamGet, Tcl_ZlibStreamGetCommandName, Tcl_ZlibStreamInit, Tcl_ZlibStreamPut \- compression and decompression functions +.SH SYNOPSIS +.nf +#include <tcl.h> +.sp +int +\fBTcl_ZlibDeflate\fR(\fIinterp, format, dataObj, level, dictObj\fR) +.sp +int +\fBTcl_ZlibInflate\fR(\fIinterp, format, dataObj, dictObj\fR) +.sp +unsigned int +\fBTcl_ZlibCRC32\fR(\fIinitValue, bytes, length\fR) +.sp +unsigned int +\fBTcl_ZlibAdler32\fR(\fIinitValue, bytes, length\fR) +.sp +int +\fBTcl_ZlibStreamInit\fR(\fIinterp, mode, format, level, dictObj, zshandlePtr\fR) +.sp +Tcl_Obj * +\fBTcl_ZlibStreamGetCommandName\fR(\fIzshandle\fR) +.sp +int +\fBTcl_ZlibStreamEof\fR(\fIzshandle\fR) +.sp +int +\fBTcl_ZlibStreamClose\fR(\fIzshandle\fR) +.sp +int +\fBTcl_ZlibStreamReset\fR(\fIzshandle\fR) +.sp +int +\fBTcl_ZlibStreamChecksum\fR(\fIzshandle\fR) +.sp +int +\fBTcl_ZlibStreamPut\fR(\fIzshandle, dataObj, flush\fR) +.sp +int +\fBTcl_ZlibStreamGet\fR(\fIzshandle, dataObj, count\fR) +.fi +.SH ARGUMENTS +.AS Tcl_ZlibStream *zshandlePtr out +.AP Tcl_Interp *interp in +The interpreter to store resulting compressed or uncompressed data in. Also +where any error messages are written. For \fBTcl_ZlibStreamInit\fR, this can +be NULL to create a stream that is not bound to a command. +.AP int format in +What format of compressed data to work with. Must be one of +\fBTCL_ZLIB_FORMAT_ZLIB\fR for zlib-format data, \fBTCL_ZLIB_FORMAT_GZIP\fR +for gzip-format data, or \fBTCL_ZLIB_FORMAT_RAW\fR for raw compressed data. In +addition, for decompression only, \fBTCL_ZLIB_FORMAT_AUTO\fR may also be +chosen which can automatically detect whether the compressed data was in zlib +or gzip format. +.AP Tcl_Obj *dataObj in/out +A byte-array object containing the data to be compressed or decompressed, or +to which the data extracted from the stream is appended when passed to +\fBTcl_ZlibStreamGet\fR. +.AP int level in +What level of compression to use. Should be a number from 0 to 9 or one of the +following: \fBTCL_ZLIB_COMPRESS_NONE\fR for no compression, +\fBTCL_ZLIB_COMPRESS_FAST\fR for fast but inefficient compression, +\fBTCL_ZLIB_COMPRESS_BEST\fR for slow but maximal compression, or +\fBTCL_ZLIB_COMPRESS_DEFAULT\fR for the level recommended by the zlib library. +.AP Tcl_Obj *dictObj in/out +A dictionary that contains, or which will be updated to contain, a description +of the gzip header associated with the compressed data. Only useful when the +\fIformat\fR is \fBTCL_ZLIB_FORMAT_GZIP\fR or \fBTCL_ZLIB_FORMAT_AUTO\fR. If +a NULL is passed, a default header will be used on compression and the header +will be ignored (apart from integrity checks) on decompression. See the +section \fBGZIP OPTIONS DICTIONARY\fR for details about the contents of this +dictionary. +.AP "unsigned int" initValue in +The initial value for the checksum algorithm. +.AP "unsigned char" *bytes in +An array of bytes to run the checksum algorithm over, or NULL to get the +recommended initial value for the checksum algorithm. +.AP int length in +The number of bytes in the array. +.AP int mode in +What mode to operate the stream in. Should be either +\fBTCL_ZLIB_STREAM_DEFLATE\fR for a compressing stream or +\fBTCL_ZLIB_STREAM_INFLATE\fR for a decompressing stream. +.AP Tcl_ZlibStream *zshandlePtr out +A pointer to a variable in which to write the abstract token for the stream +upon successful creation. +.AP Tcl_ZlibStream zshandle in +The abstract token for the stream to operate on. +.AP int flush in +Whether and how to flush the stream after writing the data to it. Must be one +of: \fBTCL_ZLIB_NO_FLUSH\fR if no flushing is to be done, \fBTCL_ZLIB_FLUSH\fR +if the currently compressed data must be made available for access using +\fBTcl_ZlibStreamGet\fR, \fBTCL_ZLIB_FULLFLUSH\fR if the stream must be put +into a state where the decompressor can recover from on corruption, or +\fBTCL_ZLIB_FINALIZE\fR to ensure that the stream is finished and that any +trailer demanded by the format is written. +.AP int count in +The maximum number of bytes to get from the stream, or -1 to get all remaining +bytes from the stream's buffers. +.BE +.SH DESCRIPTION +These functions form the interface from the Tcl library to the Zlib +library by Jean-loup Gailly and Mark Adler. +.PP +\fBTcl_ZlibDeflate\fR and \fBTcl_ZlibInflate\fR respectively compress and +decompress the data contained in the \fIdataObj\fR argument, according to the +\fIformat\fR and, for compression, \fIlevel\fR arguments. The dictionary in +the \fIdictObj\fR parameter is used to convey additional header information +about the compressed data when the compression format supports it; currently, +the dictionary is only used when the \fIformat\fR parameter is +\fBTCL_ZLIB_FORMAT_GZIP\fR or \fBTCL_ZLIB_FORMAT_AUTO\fR. For details of the +contents of the dictionary, see the \fBGZIP OPTIONS DICTIONARY\fR section +below. Upon success, both functions leave the resulting compressed or +decompressed data in a byte-array object that is the Tcl interpreter's result; +the returned value is a standard Tcl result code. +.PP +\fBTcl_ZlibAdler32\fR and \fBTcl_ZlibCRC32\fR compute checksums on arrays of +bytes, returning the computed checksum. Checksums are computed incrementally, +allowing data to be processed one block at a time, but this requires the +caller to maintain the current checksum and pass it in as the \fIinitValue\fR +parameter; the initial value to use for this can be obtained by using NULL for +the \fIbytes\fR parameter instead of a pointer to the array of bytes to +compute the checksum over. Thus, typical usage in the single data block case +is like this: +.PP +.CS +checksum = \fBTcl_ZlibCRC32\fR(\fBTcl_ZlibCRC32\fR(0,NULL,0), data, length); +.CE +.PP +Note that the Adler-32 algorithm is not a real checksum, but instead is a +related type of hash that works best on longer data. +.SS "ZLIB STREAMS" +.PP +\fBTcl_ZlibStreamInit\fR creates a compressing or decompressing stream that is +linked to a Tcl command, according to its arguments, and provides an abstract +token for the stream and returns a normal Tcl result code; +\fBTcl_ZlibStreamGetCommandName\fR returns the name of that command given the +stream token, or NULL if the stream has no command. Streams are not designed +to be thread-safe; each stream should only ever be used from the thread that +created it. When working with gzip streams, a dictionary (fields as given in +the \fBGZIP OPTIONS DICTIONARY\fR section below) can be given via the +\fIdictObj\fR parameter that on compression allows control over the generated +headers, and on decompression allows discovery of the existing headers. Note +that the dictionary will be written to on decompression once sufficient data +has been read to have a complete header. This means that the dictionary must +be an unshared object in that case; a blank object created with +\fBTcl_NewObj\fR is suggested. +.PP +Once a stream has been constructed, \fBTcl_ZlibStreamPut\fR is used to add +data to the stream and \fBTcl_ZlibStreamGet\fR is used to retrieve data from +the stream after processing. Both return normal Tcl result codes and leave an +error message in the result of the interpreter that the stream is registered +with in the error case (if such a registration has been performed). With +\fBTcl_ZlibStreamPut\fR, the data buffer object passed to it should not be +modified afterwards. With \fBTcl_ZlibStreamGet\fR, the data buffer object +passed to it will have the data bytes appended to it. Internally to the +stream, data is kept compressed so as to minimize the cost of buffer space. +.PP +\fBTcl_ZlibStreamChecksum\fR returns the checksum computed over the +uncompressed data according to the format, and \fBTcl_ZlibStreamEof\fR returns +a boolean value indicating whether the end of the uncompressed data has been +reached. +.PP +If you wish to clear a stream and reuse it for a new compression or +decompression action, \fBTcl_ZlibStreamReset\fR will do this and return a +normal Tcl result code to indicate whether it was successful; if the stream is +registered with an interpreter, an error message will be left in the +interpreter result when this function returns TCL_ERROR. +Finally, \fBTcl_ZlibStreamClose\fR will clean up the stream and delete the +associated command: using \fBTcl_DeleteCommand\fR on the stream's command is +equivalent (when such a command exists). +.SH "GZIP OPTIONS DICTIONARY" +.PP +The \fIdictObj\fR parameter to \fBTcl_ZlibDeflate\fR, \fBTcl_ZlibInflate\fR +and \fBTcl_ZlibStreamInit\fR is used to pass a dictionary of options about +that is used to describe the gzip header in the compressed data. When creating +compressed data, the dictionary is read and when unpacking compressed data the +dictionary is written (in which case the \fIdictObj\fR parameter must refer to +an unshared dictionary object). +.PP +The following fields in the dictionary object are understood. All other fields +are ignored. No field is required when creating a gzip-format stream. +.TP +\fBcomment\fR +. +This holds the comment field of the header, if present. If absent, no comment +was supplied (on decompression) or will be created (on compression). +.TP +\fBcrc\fR +. +A boolean value describing whether a CRC of the header is computed. Note that +the \fBgzip\fR program does \fInot\fR use or allow a CRC on the header. +.TP +\fBfilename\fR +. +The name of the file that held the uncompressed data. This should not contain +any directory separators, and should be sanitized before use on decompression +with \fBfile tail\fR. +.TP +\fBos\fR +. +The operating system type code field from the header (if not the +.QW unknown +value). See RFC 1952 for the meaning of these codes. On compression, if this +is absent then the field will be set to the +.QW unknown +value. +.TP +\fBsize\fR +. +The size of the uncompressed data. This is ignored on compression; the size +of the data compressed depends on how much data is supplied to the +compression engine. +.TP +\fBtime\fR +. +The time field from the header if non-zero, expected to be the time that the +file named by the \fBfilename\fR field was modified. Suitable for use with +\fBclock format\fR. On creation, the right value to use is that from +\fBclock seconds\fR or \fBfile mtime\fR. +.TP +\fBtype\fR +. +The type of the uncompressed data (either \fBbinary\fR or \fBtext\fR) if +known. +.SH "PORTABILITY NOTES" +These functions will fail gracefully if Tcl is not linked with the zlib +library. +.SH "SEE ALSO" +Tcl_NewByteArrayObj(3), zlib(n) +'\"Tcl_StackChannel(3) +.SH "KEYWORDS" +compress, decompress, deflate, gzip, inflate +'\" Local Variables: +'\" mode: nroff +'\" fill-column: 78 +'\" End: |