diff options
Diffstat (limited to 'doc/binary.n')
| -rw-r--r-- | doc/binary.n | 362 |
1 files changed, 272 insertions, 90 deletions
diff --git a/doc/binary.n b/doc/binary.n index 92a939a..0e8b28e 100644 --- a/doc/binary.n +++ b/doc/binary.n @@ -12,12 +12,10 @@ .SH NAME binary \- Insert and extract fields from binary strings .SH SYNOPSIS -.VS 8.6 \fBbinary decode \fIformat\fR ?\fI\-option value ...\fR? \fIdata\fR .br \fBbinary encode \fIformat\fR ?\fI\-option value ...\fR? \fIdata\fR .br -.VE 8.6 \fBbinary format \fIformatString \fR?\fIarg arg ...\fR? .br \fBbinary scan \fIstring formatString \fR?\fIvarName varName ...\fR? @@ -31,11 +29,9 @@ architecture, it might produce an 8-byte binary string consisting of two 4-byte integers, one for each of the numbers. The subcommand \fBbinary scan\fR, does the opposite: it extracts data from a binary string and returns it as ordinary Tcl string values. -.VS 8.6 The \fBbinary encode\fR and \fBbinary decode\fR subcommands convert binary data to or from string encodings such as base64 (used in MIME messages for example). -.VE 8.6 .PP Note that other operations on binary data, such as taking a subsequence of it, getting its length, or reinterpreting it as a string in some encoding, are @@ -44,7 +40,6 @@ done by other Tcl commands (respectively \fBstring range\fR, binary string in Tcl is merely one where all the characters it contains are in the range \eu0000\-\eu00FF. .SH "BINARY ENCODE AND DECODE" -.VS 8.6 .PP When encoding binary data as a readable string, the starting binary data is passed to the \fBbinary encode\fR command, together with the name of the @@ -135,7 +130,6 @@ between the encoder and decoder. Note that neither the encoder nor the decoder handle the header and footer of the uuencode format. .RE -.VE 8.6 .SH "BINARY FORMAT" .PP The \fBbinary format\fR command generates a binary string whose layout @@ -150,7 +144,9 @@ Most field specifiers consume one argument to obtain the value to be formatted. The type character specifies how the value is to be formatted. The \fIcount\fR typically indicates how many items of the specified type are taken from the value. If present, the \fIcount\fR -is a non-negative decimal integer or \fB*\fR, which normally indicates +is a non-negative decimal integer or +.QW \fB*\fR , +which normally indicates that all of the items in the value are to be used. If the number of arguments does not match the number of fields in the format string that consume arguments, then an error is generated. The flag character @@ -158,6 +154,7 @@ is ignored for \fBbinary format\fR. .PP Here is a small example to clarify the relation between the field specifiers and the arguments: +.PP .CS \fBbinary format\fR d3d {1.0 2.0 3.0 4.0} 0.1 .CE @@ -185,29 +182,63 @@ not part of the ISO 8859\-1 character set.) If \fIarg\fR has fewer than \fIcount\fR bytes, then additional zero bytes are used to pad out the field. If \fIarg\fR is longer than the specified length, the extra characters will be ignored. If -\fIcount\fR is \fB*\fR, then all of the bytes in \fIarg\fR will be +\fIcount\fR is +.QW \fB*\fR , +then all of the bytes in \fIarg\fR will be formatted. If \fIcount\fR is omitted, then one character will be -formatted. For example, +formatted. For example, the command: .RS +.PP .CS \fBbinary format\fR a7a*a alpha bravo charlie .CE -will return a string equivalent to \fBalpha\e000\e000bravoc\fR, +.PP +will return a binary string equivalent to: +.PP +.CS +\fBalpha\e000\e000bravoc\fR +.CE +.PP +the command: +.PP .CS \fBbinary format\fR a* [encoding convertto utf-8 \eu20ac] .CE -will return a string equivalent to \fB\e342\e202\e254\fR (which is the -UTF-8 byte sequence for a Euro-currency character) and +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\e342\e202\e254\fR +.CE +.PP +(which is the +UTF-8 byte sequence for a Euro-currency character), and the command: +.PP .CS \fBbinary format\fR a* [encoding convertto iso8859-15 \eu20ac] .CE -will return a string equivalent to \fB\e244\fR (which is the ISO +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\e244\fR +.CE +.PP +(which is the ISO 8859\-15 byte sequence for a Euro-currency character). Contrast these last two with: +.PP .CS \fBbinary format\fR a* \eu20ac .CE -which returns a string equivalent to \fB\e254\fR (i.e. \fB\exac\fR) by +.PP +which returns a binary string equivalent to: +.PP +.CS +\fB\e254\fR +.CE +.PP +(i.e. \fB\exac\fR) by truncating the high-bits of the character, and which is probably not what is desired. .RE @@ -215,42 +246,62 @@ what is desired. This form is the same as \fBa\fR except that spaces are used for padding instead of nulls. For example, .RS +.PP .CS \fBbinary format\fR A6A*A alpha bravo charlie .CE -will return \fBalpha bravoc\fR. +.PP +will return +.PP +.CS +\fBalpha bravoc\fR +.CE .RE .IP \fBb\fR 5 Stores a string of \fIcount\fR binary digits in low-to-high order -within each byte in the output string. \fIArg\fR must contain a +within each byte in the output binary string. \fIArg\fR must contain a sequence of \fB1\fR and \fB0\fR characters. The resulting bytes are emitted in first to last order with the bits being formatted in low-to-high order within each byte. If \fIarg\fR has fewer than \fIcount\fR digits, then zeros will be used for the remaining bits. If \fIarg\fR has more than the specified number of digits, the extra -digits will be ignored. If \fIcount\fR is \fB*\fR, then all of the +digits will be ignored. If \fIcount\fR is +.QW \fB*\fR , +then all of the digits in \fIarg\fR will be formatted. If \fIcount\fR is omitted, then one digit will be formatted. If the number of bits formatted does not end at a byte boundary, the remaining bits of the last byte will be zeros. For example, .RS +.PP .CS \fBbinary format\fR b5b* 11100 111000011010 .CE -will return a string equivalent to \fB\ex07\ex87\ex05\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\ex07\ex87\ex05\fR +.CE .RE .IP \fBB\fR 5 This form is the same as \fBb\fR except that the bits are stored in high-to-low order within each byte. For example, .RS +.PP .CS \fBbinary format\fR B5B* 11100 111000011010 .CE -will return a string equivalent to \fB\exe0\exe1\exa0\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\exe0\exe1\exa0\fR +.CE .RE .IP \fBH\fR 5 Stores a string of \fIcount\fR hexadecimal digits in high-to-low -within each byte in the output string. \fIArg\fR must contain a +within each byte in the output binary string. \fIArg\fR must contain a sequence of characters in the set .QW 0123456789abcdefABCDEF . The resulting bytes are emitted in first to last order with the hex digits @@ -258,43 +309,66 @@ being formatted in high-to-low order within each byte. If \fIarg\fR has fewer than \fIcount\fR digits, then zeros will be used for the remaining digits. If \fIarg\fR has more than the specified number of digits, the extra digits will be ignored. If \fIcount\fR is -\fB*\fR, then all of the digits in \fIarg\fR will be formatted. If +.QW \fB*\fR , +then all of the digits in \fIarg\fR will be formatted. If \fIcount\fR is omitted, then one digit will be formatted. If the number of digits formatted does not end at a byte boundary, the remaining bits of the last byte will be zeros. For example, .RS +.PP .CS \fBbinary format\fR H3H*H2 ab DEF 987 .CE -will return a string equivalent to \fB\exab\ex00\exde\exf0\ex98\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\exab\ex00\exde\exf0\ex98\fR +.CE .RE .IP \fBh\fR 5 This form is the same as \fBH\fR except that the digits are stored in low-to-high order within each byte. This is seldom required. For example, .RS +.PP .CS \fBbinary format\fR h3h*h2 AB def 987 .CE -will return a string equivalent to \fB\exba\ex00\exed\ex0f\ex89\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\exba\ex00\exed\ex0f\ex89\fR +.CE .RE .IP \fBc\fR 5 Stores one or more 8-bit integer values in the output string. If no \fIcount\fR is specified, then \fIarg\fR must consist of an integer value. If \fIcount\fR is specified, \fIarg\fR must consist of a list containing at least that many integers. The low-order 8 bits of each integer -are stored as a one-byte value at the cursor position. If \fIcount\fR -is \fB*\fR, then all of the integers in the list are formatted. If the +are stored as a one-byte value at the cursor position. If \fIcount\fR is +.QW \fB*\fR , +then all of the integers in the list are formatted. If the number of elements in the list is greater than \fIcount\fR, then the extra elements are ignored. For example, .RS +.PP .CS \fBbinary format\fR c3cc* {3 -3 128 1} 260 {2 5} .CE -will return a string equivalent to -\fB\ex03\exfd\ex80\ex04\ex02\ex05\fR, whereas +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\ex03\exfd\ex80\ex04\ex02\ex05\fR +.CE +.PP +whereas: +.PP .CS \fBbinary format\fR c {2 5} .CE +.PP will generate an error. .RE .IP \fBs\fR 5 @@ -304,22 +378,32 @@ low-order 16-bits of each integer are stored as a two-byte value at the cursor position with the least significant byte stored first. For example, .RS +.PP .CS \fBbinary format\fR s3 {3 -3 258 1} .CE -will return a string equivalent to -\fB\ex03\ex00\exfd\exff\ex02\ex01\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\ex03\ex00\exfd\exff\ex02\ex01\fR +.CE .RE .IP \fBS\fR 5 This form is the same as \fBs\fR except that it stores one or more 16-bit integers in big-endian byte order in the output string. For example, .RS +.PP .CS \fBbinary format\fR S3 {3 -3 258 1} .CE -will return a string equivalent to -\fB\ex00\ex03\exff\exfd\ex01\ex02\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\ex00\ex03\exff\exfd\ex01\ex02\fR +.CE .RE .IP \fBt\fR 5 This form (mnemonically \fItiny\fR) is the same as \fBs\fR and \fBS\fR @@ -334,22 +418,32 @@ low-order 32-bits of each integer are stored as a four-byte value at the cursor position with the least significant byte stored first. For example, .RS +.PP .CS \fBbinary format\fR i3 {3 -3 65536 1} .CE -will return a string equivalent to +.PP +will return a binary string equivalent to: +.PP +.CS \fB\ex03\ex00\ex00\ex00\exfd\exff\exff\exff\ex00\ex00\ex01\ex00\fR +.CE .RE .IP \fBI\fR 5 This form is the same as \fBi\fR except that it stores one or more one or more 32-bit integers in big-endian byte order in the output string. For example, .RS +.PP .CS \fBbinary format\fR I3 {3 -3 65536 1} .CE -will return a string equivalent to +.PP +will return a binary string equivalent to: +.PP +.CS \fB\ex00\ex00\ex00\ex03\exff\exff\exff\exfd\ex00\ex01\ex00\ex00\fR +.CE .RE .IP \fBn\fR 5 This form (mnemonically \fInumber\fR or \fInormal\fR) is the same as @@ -365,20 +459,24 @@ low-order 64-bits of each integer are stored as an eight-byte value at the cursor position with the least significant byte stored first. For example, .RS +.PP .CS \fBbinary format\fR w 7810179016327718216 .CE -will return the string \fBHelloTcl\fR +.PP +will return the binary string \fBHelloTcl\fR. .RE .IP \fBW\fR 5 This form is the same as \fBw\fR except that it stores one or more one or more 64-bit integers in big-endian byte order in the output string. For example, .RS +.PP .CS \fBbinary format\fR Wc 4785469626960341345 110 .CE -will return the string \fBBigEndian\fR +.PP +will return the binary string \fBBigEndian\fR .RE .IP \fBm\fR 5 This form (mnemonically the mirror of \fBw\fR) is the same as \fBw\fR @@ -401,11 +499,16 @@ double-precision floating point numbers internally, there may be some loss of precision in the conversion to single-precision. For example, on a Windows system running on an Intel Pentium processor, .RS +.PP .CS \fBbinary format\fR f2 {1.6 3.4} .CE -will return a string equivalent to -\fB\excd\excc\excc\ex3f\ex9a\ex99\ex59\ex40\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\excd\excc\excc\ex3f\ex9a\ex99\ex59\ex40\fR +.CE .RE .IP \fBr\fR 5 This form (mnemonically \fIreal\fR) is the same as \fBf\fR except that @@ -422,11 +525,16 @@ or more double-precision floating point numbers in the machine's native representation in the output string. For example, on a Windows system running on an Intel Pentium processor, .RS +.PP .CS \fBbinary format\fR d1 {1.6} .CE -will return a string equivalent to -\fB\ex9a\ex99\ex99\ex99\ex99\ex99\exf9\ex3f\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fB\ex9a\ex99\ex99\ex99\ex99\ex99\exf9\ex3f\fR +.CE .RE .IP \fBq\fR 5 This form (mnemonically the mirror of \fBd\fR) is the same as \fBd\fR @@ -439,26 +547,37 @@ This form is the same as \fBq\fR except that it stores the double-precision floating point numbers in big-endian order. .IP \fBx\fR 5 Stores \fIcount\fR null bytes in the output string. If \fIcount\fR is -not specified, stores one null byte. If \fIcount\fR is \fB*\fR, +not specified, stores one null byte. If \fIcount\fR is +.QW \fB*\fR , generates an error. This type does not consume an argument. For example, .RS +.PP .CS \fBbinary format\fR a3xa3x2a3 abc def ghi .CE -will return a string equivalent to \fBabc\e000def\e000\e000ghi\fR. +.PP +will return a binary string equivalent to: +.PP +.CS +\fBabc\e000def\e000\e000ghi\fR +.CE .RE .IP \fBX\fR 5 Moves the cursor back \fIcount\fR bytes in the output string. If -\fIcount\fR is \fB*\fR or is larger than the current cursor position, +\fIcount\fR is +.QW \fB*\fR +or is larger than the current cursor position, then the cursor is positioned at location 0 so that the next byte stored will be the first byte in the result string. If \fIcount\fR is omitted then the cursor is moved back one byte. This type does not consume an argument. For example, .RS +.PP .CS \fBbinary format\fR a3X*a3X2a3 abc def ghi .CE +.PP will return \fBdghi\fR. .RE .IP \fB@\fR 5 @@ -467,14 +586,22 @@ specified by \fIcount\fR. Position 0 refers to the first byte in the output string. If \fIcount\fR refers to a position beyond the last byte stored so far, then null bytes will be placed in the uninitialized locations and the cursor will be placed at the specified location. If -\fIcount\fR is \fB*\fR, then the cursor is moved to the current end of +\fIcount\fR is +.QW \fB*\fR , +then the cursor is moved to the current end of the output string. If \fIcount\fR is omitted, then an error will be generated. This type does not consume an argument. For example, .RS +.PP .CS \fBbinary format\fR a5@2a1@*a3@10a1 abcde f ghi j .CE -will return \fBabfdeghi\e000\e000j\fR. +.PP +will return +.PP +.CS +\fBabfdeghi\e000\e000j\fR +.CE .RE .SH "BINARY SCAN" .PP @@ -496,8 +623,9 @@ argument to obtain the variable into which the scanned values should be placed. The type character specifies how the binary data is to be interpreted. The \fIcount\fR typically indicates how many items of the specified type are taken from the data. If present, the -\fIcount\fR is a non-negative decimal integer or \fB*\fR, which -normally indicates that all of the remaining items in the data are to +\fIcount\fR is a non-negative decimal integer or +.QW \fB*\fR , +which normally indicates that all of the remaining items in the data are to be used. If there are not enough bytes left after the current cursor position to satisfy the current field specifier, then the corresponding variable is left untouched and \fBbinary scan\fR returns @@ -511,6 +639,7 @@ is accepted for all field types but is ignored for non-integer fields. A similar example as with \fBbinary format\fR should explain the relation between field specifiers and arguments in case of the binary scan subcommand: +.PP .CS \fBbinary scan\fR $bytes s3s first second .CE @@ -522,12 +651,15 @@ If \fIbytes\fR contains fewer than 8 bytes (i.e. four 2-byte integers), no assignment to \fIsecond\fR will be made, and if \fIbytes\fR contains fewer than 6 bytes (i.e. three 2-byte integers), no assignment to \fIfirst\fR will be made. Hence: +.PP .CS puts [\fBbinary scan\fR abcdefg s3s first second] puts $first puts $second .CE +.PP will print (assuming neither variable is set previously): +.PP .CS 1 25185 25699 26213 @@ -539,14 +671,17 @@ It is \fIimportant\fR to note that the \fBc\fR, \fBs\fR, and \fBS\fR long data size values. In doing this, values that have their high bit set (0x80 for chars, 0x8000 for shorts, 0x80000000 for ints), will be sign extended. Thus the following will occur: +.PP .CS set signShort [\fBbinary format\fR s1 0x8000] \fBbinary scan\fR $signShort s1 val; \fI# val == 0xFFFF8000\fR .CE +.PP If you require unsigned values you can include the .QW u flag character following the field type. For example, to read an unsigned short value: +.PP .CS set signShort [\fBbinary format\fR s1 0x8000] \fBbinary scan\fR $signShort su1 val; \fI# val == 0x00008000\fR @@ -557,8 +692,9 @@ reading bytes from the current position. The cursor is initially at position 0 at the beginning of the data. The type may be any one of the following characters: .IP \fBa\fR 5 -The data is a byte string of length \fIcount\fR. If \fIcount\fR -is \fB*\fR, then all of the remaining bytes in \fIstring\fR will be +The data is a byte string of length \fIcount\fR. If \fIcount\fR is +.QW \fB*\fR , +then all of the remaining bytes in \fIstring\fR will be scanned into the variable. If \fIcount\fR is omitted, then one byte will be scanned. All bytes scanned will be interpreted as being characters in the @@ -567,24 +703,30 @@ needed if the string is not a binary string or a string encoded in ISO 8859\-1. For example, .RS +.PP .CS \fBbinary scan\fR abcde\e000fghi a6a10 var1 var2 .CE +.PP will return \fB1\fR with the string equivalent to \fBabcde\e000\fR stored in \fIvar1\fR and \fIvar2\fR left unmodified, and +.PP .CS \fBbinary scan\fR \e342\e202\e254 a* var1 set var2 [encoding convertfrom utf-8 $var1] .CE +.PP will store a Euro-currency character in \fIvar2\fR. .RE .IP \fBA\fR 5 This form is the same as \fBa\fR, except trailing blanks and nulls are stripped from the scanned value before it is stored in the variable. For example, .RS +.PP .CS \fBbinary scan\fR "abc efghi \e000" A* var1 .CE +.PP will return \fB1\fR with \fBabc efghi\fR stored in \fIvar1\fR. .RE .IP \fBb\fR 5 @@ -595,13 +737,16 @@ and .QW 0 characters. The data bytes are scanned in first to last order with the bits being taken in low-to-high order within each byte. Any extra -bits in the last byte are ignored. If \fIcount\fR is \fB*\fR, then -all of the remaining bits in \fIstring\fR will be scanned. If +bits in the last byte are ignored. If \fIcount\fR is +.QW \fB*\fR , +then all of the remaining bits in \fIstring\fR will be scanned. If \fIcount\fR is omitted, then one bit will be scanned. For example, .RS +.PP .CS \fBbinary scan\fR \ex07\ex87\ex05 b5b* var1 var2 .CE +.PP will return \fB2\fR with \fB11100\fR stored in \fIvar1\fR and \fB1110000110100000\fR stored in \fIvar2\fR. .RE @@ -609,9 +754,11 @@ will return \fB2\fR with \fB11100\fR stored in \fIvar1\fR and This form is the same as \fBb\fR, except the bits are taken in high-to-low order within each byte. For example, .RS +.PP .CS \fBbinary scan\fR \ex70\ex87\ex05 B5B* var1 var2 .CE +.PP will return \fB2\fR with \fB01110\fR stored in \fIvar1\fR and \fB1000011100000101\fR stored in \fIvar2\fR. .RE @@ -622,13 +769,16 @@ high-to-low order represented as a sequence of characters in the set The data bytes are scanned in first to last order with the hex digits being taken in high-to-low order within each byte. Any extra bits in the last byte are ignored. If \fIcount\fR is -\fB*\fR, then all of the remaining hex digits in \fIstring\fR will be +.QW \fB*\fR , +then all of the remaining hex digits in \fIstring\fR will be scanned. If \fIcount\fR is omitted, then one hex digit will be scanned. For example, .RS +.PP .CS \fBbinary scan\fR \ex07\exC6\ex05\ex1f\ex34 H3H* var1 var2 .CE +.PP will return \fB2\fR with \fB07c\fR stored in \fIvar1\fR and \fB051f34\fR stored in \fIvar2\fR. .RE @@ -636,9 +786,11 @@ will return \fB2\fR with \fB07c\fR stored in \fIvar1\fR and This form is the same as \fBH\fR, except the digits are taken in reverse (low-to-high) order within each byte. For example, .RS +.PP .CS \fBbinary scan\fR \ex07\ex86\ex05\ex12\ex34 h3h* var1 var2 .CE +.PP will return \fB2\fR with \fB706\fR stored in \fIvar1\fR and \fB502143\fR stored in \fIvar2\fR. .PP @@ -647,135 +799,151 @@ multiple bytes in order should use the \fBH\fR format. .RE .IP \fBc\fR 5 The data is turned into \fIcount\fR 8-bit signed integers and stored -in the corresponding variable as a list. If \fIcount\fR is \fB*\fR, +in the corresponding variable as a list, or as unsigned if \fBu\fR is placed +immediately after the \fBc\fR. If \fIcount\fR is +.QW \fB*\fR , then all of the remaining bytes in \fIstring\fR will be scanned. If \fIcount\fR is omitted, then one 8-bit integer will be scanned. For example, .RS +.PP .CS \fBbinary scan\fR \ex07\ex86\ex05 c2c* var1 var2 .CE +.PP will return \fB2\fR with \fB7 -122\fR stored in \fIvar1\fR and \fB5\fR -stored in \fIvar2\fR. Note that the integers returned are signed, but -they can be converted to unsigned 8-bit quantities using an expression -like: -.CS -set num [expr { $num & 0xFF }] -.CE +stored in \fIvar2\fR. Note that the integers returned are signed unless +\fBcu\fR in place of \fBc\fR. .RE .IP \fBs\fR 5 The data is interpreted as \fIcount\fR 16-bit signed integers -represented in little-endian byte order. The integers are stored in -the corresponding variable as a list. If \fIcount\fR is \fB*\fR, then -all of the remaining bytes in \fIstring\fR will be scanned. If +represented in little-endian byte order, or as unsigned if \fBu\fR is placed +immediately after the \fBs\fR. The integers are stored in +the corresponding variable as a list. If \fIcount\fR is +.QW \fB*\fR , +then all of the remaining bytes in \fIstring\fR will be scanned. If \fIcount\fR is omitted, then one 16-bit integer will be scanned. For example, .RS +.PP .CS \fBbinary scan\fR \ex05\ex00\ex07\ex00\exf0\exff s2s* var1 var2 .CE +.PP will return \fB2\fR with \fB5 7\fR stored in \fIvar1\fR and \fB\-16\fR -stored in \fIvar2\fR. Note that the integers returned are signed, but -they can be converted to unsigned 16-bit quantities using an expression -like: -.CS -set num [expr { $num & 0xFFFF }] -.CE +stored in \fIvar2\fR. Note that the integers returned are signed unless +\fBsu\fR is used in place of \fBs\fR. .RE .IP \fBS\fR 5 This form is the same as \fBs\fR except that the data is interpreted -as \fIcount\fR 16-bit signed integers represented in big-endian byte +as \fIcount\fR 16-bit integers represented in big-endian byte order. For example, .RS +.PP .CS \fBbinary scan\fR \ex00\ex05\ex00\ex07\exff\exf0 S2S* var1 var2 .CE +.PP will return \fB2\fR with \fB5 7\fR stored in \fIvar1\fR and \fB\-16\fR stored in \fIvar2\fR. .RE .IP \fBt\fR 5 The data is interpreted as \fIcount\fR 16-bit signed integers represented in the native byte order of the machine running the Tcl -script. It is otherwise identical to \fBs\fR and \fBS\fR. +script, or as unsigned if \fBu\fR is placed +immediately after the \fBt\fR. It is otherwise identical to \fBs\fR and \fBS\fR. To determine what the native byte order of the machine is, refer to the \fBbyteOrder\fR element of the \fBtcl_platform\fR array. .IP \fBi\fR 5 The data is interpreted as \fIcount\fR 32-bit signed integers -represented in little-endian byte order. The integers are stored in -the corresponding variable as a list. If \fIcount\fR is \fB*\fR, then -all of the remaining bytes in \fIstring\fR will be scanned. If +represented in little-endian byte order, or as unsigned if \fBu\fR is placed +immediately after the \fBi\fR. The integers are stored in +the corresponding variable as a list. If \fIcount\fR is +.QW \fB*\fR , +then all of the remaining bytes in \fIstring\fR will be scanned. If \fIcount\fR is omitted, then one 32-bit integer will be scanned. For example, .RS +.PP .CS set str \ex05\ex00\ex00\ex00\ex07\ex00\ex00\ex00\exf0\exff\exff\exff \fBbinary scan\fR $str i2i* var1 var2 .CE +.PP will return \fB2\fR with \fB5 7\fR stored in \fIvar1\fR and \fB\-16\fR -stored in \fIvar2\fR. Note that the integers returned are signed, but -they can be converted to unsigned 32-bit quantities using an expression -like: -.CS -set num [expr { $num & 0xFFFFFFFF }] -.CE +stored in \fIvar2\fR. Note that the integers returned are signed unless +\fBiu\fR is used in place of \fBi\fR. .RE .IP \fBI\fR 5 This form is the same as \fBI\fR except that the data is interpreted as \fIcount\fR 32-bit signed integers represented in big-endian byte -order. For example, +order, or as unsigned if \fBu\fR is placed +immediately after the \fBI\fR. For example, .RS +.PP .CS set str \ex00\ex00\ex00\ex05\ex00\ex00\ex00\ex07\exff\exff\exff\exf0 \fBbinary scan\fR $str I2I* var1 var2 .CE +.PP will return \fB2\fR with \fB5 7\fR stored in \fIvar1\fR and \fB\-16\fR stored in \fIvar2\fR. .RE .IP \fBn\fR 5 The data is interpreted as \fIcount\fR 32-bit signed integers represented in the native byte order of the machine running the Tcl -script. It is otherwise identical to \fBi\fR and \fBI\fR. +script, or as unsigned if \fBu\fR is placed +immediately after the \fBn\fR. It is otherwise identical to \fBi\fR and \fBI\fR. To determine what the native byte order of the machine is, refer to the \fBbyteOrder\fR element of the \fBtcl_platform\fR array. .IP \fBw\fR 5 The data is interpreted as \fIcount\fR 64-bit signed integers -represented in little-endian byte order. The integers are stored in -the corresponding variable as a list. If \fIcount\fR is \fB*\fR, then -all of the remaining bytes in \fIstring\fR will be scanned. If +represented in little-endian byte order, or as unsigned if \fBu\fR is placed +immediately after the \fBw\fR. The integers are stored in +the corresponding variable as a list. If \fIcount\fR is +.QW \fB*\fR , +then all of the remaining bytes in \fIstring\fR will be scanned. If \fIcount\fR is omitted, then one 64-bit integer will be scanned. For example, .RS +.PP .CS set str \ex05\ex00\ex00\ex00\ex07\ex00\ex00\ex00\exf0\exff\exff\exff \fBbinary scan\fR $str wi* var1 var2 .CE +.PP will return \fB2\fR with \fB30064771077\fR stored in \fIvar1\fR and -\fB\-16\fR stored in \fIvar2\fR. Note that the integers returned are -signed and cannot be represented by Tcl as unsigned values. +\fB\-16\fR stored in \fIvar2\fR. .RE .IP \fBW\fR 5 This form is the same as \fBw\fR except that the data is interpreted as \fIcount\fR 64-bit signed integers represented in big-endian byte -order. For example, +order, or as unsigned if \fBu\fR is placed +immediately after the \fBW\fR. For example, .RS +.PP .CS set str \ex00\ex00\ex00\ex05\ex00\ex00\ex00\ex07\exff\exff\exff\exf0 \fBbinary scan\fR $str WI* var1 var2 .CE +.PP will return \fB2\fR with \fB21474836487\fR stored in \fIvar1\fR and \fB\-16\fR stored in \fIvar2\fR. .RE .IP \fBm\fR 5 The data is interpreted as \fIcount\fR 64-bit signed integers represented in the native byte order of the machine running the Tcl -script. It is otherwise identical to \fBw\fR and \fBW\fR. +script, or as unsigned if \fBu\fR is placed +immediately after the \fBm\fR. It is otherwise identical to \fBw\fR and \fBW\fR. To determine what the native byte order of the machine is, refer to the \fBbyteOrder\fR element of the \fBtcl_platform\fR array. .IP \fBf\fR 5 The data is interpreted as \fIcount\fR single-precision floating point numbers in the machine's native representation. The floating point numbers are stored in the corresponding variable as a list. If -\fIcount\fR is \fB*\fR, then all of the remaining bytes in +\fIcount\fR is +.QW \fB*\fR , +then all of the remaining bytes in \fIstring\fR will be scanned. If \fIcount\fR is omitted, then one single-precision floating point number will be scanned. The size of a floating point number may vary across architectures, so the number of @@ -784,9 +952,11 @@ valid floating point number, the resulting value is undefined and compiler dependent. For example, on a Windows system running on an Intel Pentium processor, .RS +.PP .CS \fBbinary scan\fR \ex3f\excc\excc\excd f var1 .CE +.PP will return \fB1\fR with \fB1.6000000238418579\fR stored in \fIvar1\fR. .RE @@ -806,9 +976,11 @@ as \fIcount\fR double-precision floating point numbers in the machine's native representation. For example, on a Windows system running on an Intel Pentium processor, .RS +.PP .CS \fBbinary scan\fR \ex9a\ex99\ex99\ex99\ex99\ex99\exf9\ex3f d var1 .CE +.PP will return \fB1\fR with \fB1.6000000000000001\fR stored in \fIvar1\fR. .RE @@ -824,28 +996,36 @@ order. This conversion is not portable to the minority of systems not using IEEE floating point representations. .IP \fBx\fR 5 Moves the cursor forward \fIcount\fR bytes in \fIstring\fR. If -\fIcount\fR is \fB*\fR or is larger than the number of bytes after the +\fIcount\fR is +.QW \fB*\fR +or is larger than the number of bytes after the current cursor position, then the cursor is positioned after the last byte in \fIstring\fR. If \fIcount\fR is omitted, then the cursor is moved forward one byte. Note that this type does not consume an argument. For example, .RS +.PP .CS \fBbinary scan\fR \ex01\ex02\ex03\ex04 x2H* var1 .CE +.PP will return \fB1\fR with \fB0304\fR stored in \fIvar1\fR. .RE .IP \fBX\fR 5 Moves the cursor back \fIcount\fR bytes in \fIstring\fR. If -\fIcount\fR is \fB*\fR or is larger than the current cursor position, +\fIcount\fR is +.QW \fB*\fR +or is larger than the current cursor position, then the cursor is positioned at location 0 so that the next byte scanned will be the first byte in \fIstring\fR. If \fIcount\fR is omitted then the cursor is moved back one byte. Note that this type does not consume an argument. For example, .RS +.PP .CS \fBbinary scan\fR \ex01\ex02\ex03\ex04 c2XH* var1 var2 .CE +.PP will return \fB2\fR with \fB1 2\fR stored in \fIvar1\fR and \fB020304\fR stored in \fIvar2\fR. .RE @@ -856,9 +1036,11 @@ by \fIcount\fR. Note that position 0 refers to the first byte in \fIstring\fR, then the cursor is positioned after the last byte. If \fIcount\fR is omitted, then an error will be generated. For example, .RS +.PP .CS \fBbinary scan\fR \ex01\ex02\ex03\ex04 c2@1H* var1 var2 .CE +.PP will return \fB2\fR with \fB1 2\fR stored in \fIvar1\fR and \fB020304\fR stored in \fIvar2\fR. .RE |