diff options
Diffstat (limited to 'doc/exec.n')
| -rw-r--r-- | doc/exec.n | 206 |
1 files changed, 109 insertions, 97 deletions
@@ -5,7 +5,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH exec n 8.5 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -13,9 +13,8 @@ .SH NAME exec \- Invoke subprocesses .SH SYNOPSIS -\fBexec \fR?\fIswitches\fR? \fIarg \fR?\fIarg ...\fR? +\fBexec \fR?\fIswitches\fR? \fIarg \fR?\fIarg ...\fR? ?\fB&\fR? .BE - .SH DESCRIPTION .PP This command treats its arguments as the specification @@ -30,16 +29,17 @@ of the pipeline specification. The following switches are currently supported: .TP 13 \fB\-ignorestderr\fR -.VS 8.5 +. Stops the \fBexec\fR command from treating the output of messages to the pipeline's standard error channel as an error case. -.VE 8.5 .TP 13 \fB\-keepnewline\fR +. Retains a trailing newline in the pipeline's output. Normally a trailing newline will be deleted. .TP 13 \fB\-\|\-\fR +. Marks the end of switches. The argument following this one will be treated as the first \fIarg\fR even if it starts with a \fB\-\fR. .PP @@ -55,64 +55,77 @@ or in the same argument with no intervening space (i.e. .QW \fB<\fIfileName\fR ). .TP 15 \fB|\fR +. Separates distinct commands in the pipeline. The standard output of the preceding command will be piped into the standard input of the next command. .TP 15 \fB|&\fR +. Separates distinct commands in the pipeline. Both standard output and standard error of the preceding command will be piped into the standard input of the next command. This form of redirection overrides forms such as 2> and >&. .TP 15 \fB<\0\fIfileName\fR +. The file named by \fIfileName\fR is opened and used as the standard input for the first command in the pipeline. .TP 15 \fB<@\0\fIfileId\fR +. \fIFileId\fR must be the identifier for an open file, such as the return value from a previous call to \fBopen\fR. It is used as the standard input for the first command in the pipeline. \fIFileId\fR must have been opened for reading. .TP 15 \fB<<\0\fIvalue\fR +. \fIValue\fR is passed to the first command as its standard input. .TP 15 \fB>\0\fIfileName\fR +. Standard output from the last command is redirected to the file named \fIfileName\fR, overwriting its previous contents. .TP 15 \fB2>\0\fIfileName\fR +. Standard error from all commands in the pipeline is redirected to the file named \fIfileName\fR, overwriting its previous contents. .TP 15 \fB>&\0\fIfileName\fR +. Both standard output from the last command and standard error from all commands are redirected to the file named \fIfileName\fR, overwriting its previous contents. .TP 15 \fB>>\0\fIfileName\fR +. Standard output from the last command is redirected to the file named \fIfileName\fR, appending to it rather than overwriting it. .TP 15 \fB2>>\0\fIfileName\fR +. Standard error from all commands in the pipeline is redirected to the file named \fIfileName\fR, appending to it rather than overwriting it. .TP 15 \fB>>&\0\fIfileName\fR +. Both standard output from the last command and standard error from all commands are redirected to the file named \fIfileName\fR, appending to it rather than overwriting it. .TP 15 \fB>@\0\fIfileId\fR +. \fIFileId\fR must be the identifier for an open file, such as the return value from a previous call to \fBopen\fR. Standard output from the last command is redirected to \fIfileId\fR's file, which must have been opened for writing. .TP 15 \fB2>@\0\fIfileId\fR +. \fIFileId\fR must be the identifier for an open file, such as the return value from a previous call to \fBopen\fR. Standard error from all commands in the pipeline is @@ -120,11 +133,13 @@ redirected to \fIfileId\fR's file. The file must have been opened for writing. .TP 15 \fB2>@1\0\fR +. Standard error from all commands in the pipeline is redirected to the command result. This operator is only valid at the end of the command pipeline. .TP 15 \fB>&@\0\fIfileId\fR +. \fIFileId\fR must be the identifier for an open file, such as the return value from a previous call to \fBopen\fR. Both standard output from the last command and standard error from @@ -133,12 +148,9 @@ The file must have been opened for writing. .PP If standard output has not been redirected then the \fBexec\fR command returns the standard output from the last command -in the pipeline, -.VS 8.5 -unless +in the pipeline, unless .QW 2>@1 was specified, in which case standard error is included as well. -.VE 8.5 If any of the commands in the pipeline exit abnormally or are killed or suspended, then \fBexec\fR will return an error and the error message will include the pipeline's output followed by @@ -147,9 +159,7 @@ error messages describing the abnormal terminations; the about the last abnormal termination encountered. If any of the commands writes to its standard error file and that standard error is not redirected -.VS 8.5 and \fB\-ignorestderr\fR is not specified, -.VE 8.5 then \fBexec\fR will return an error; the error message will include the pipeline's standard output, followed by messages about abnormal terminations (if any), followed by the standard error @@ -210,7 +220,7 @@ discarded. The Tk console text widget does not provide real standard IO capabilities. Under Tk, when redirecting from standard input, all applications will see an immediate end-of-file; information redirected to standard output or standard -error will be discarded. +error will be discarded. .PP Either forward or backward slashes are accepted as path separators for arguments to Tcl commands. When executing an application, the path name @@ -221,7 +231,7 @@ backslashes only in paths. Any arguments to an application that specify a path name with forward slashes will not automatically be converted to use the backslash character. If an argument contains forward slashes as the path separator, it may or may not be recognized as a path name, depending on -the program. +the program. .PP Additionally, when calling a 16-bit DOS or Windows 3.X application, all path names must use the short, cryptic, path format (e.g., using @@ -229,7 +239,7 @@ names must use the short, cryptic, path format (e.g., using instead of .QW applbakery.default ), which can be obtained with the -.QW "\fBfile attributes \fIfileName \fB\-shortname\fR" +.QW "\fBfile attributes\fI fileName \fB\-shortname\fR" command. .PP Two or more forward or backward slashes in a row in a path refer to a @@ -259,28 +269,25 @@ present, as is done when launching applications under wish. It is desirable to have console applications hidden and detached. This is a designed-in limitation as \fBexec\fR wants to communicate over pipes. The Expect extension addresses this issue when communicating with a TUI application. -.RE -.TP -\fBWindows NT\fR -. +.PP When attempting to execute an application, \fBexec\fR first searches for -the name as it was specified. Then, in order, \fB.com\fR, \fB.exe\fR, and -\fB.bat\fR are appended to the end of the specified name and it searches +the name as it was specified. Then, in order, +\fB.com\fR, \fB.exe\fR, \fB.bat\fR and \fB.cmd\fR +are appended to the end of the specified name and it searches for the longer name. If a directory name was not specified as part of the application name, the following directories are automatically searched in order when attempting to locate the application: -.RS -.IP \(bu +.IP \(bu 3 The directory from which the Tcl executable was loaded. -.IP \(bu +.IP \(bu 3 The current directory. -.IP \(bu +.IP \(bu 3 The Windows NT 32-bit system directory. -.IP \(bu +.IP \(bu 3 The Windows NT 16-bit system directory. -.IP \(bu +.IP \(bu 3 The Windows NT home directory. -.IP \(bu +.IP \(bu 3 The directories listed in the path. .PP In order to execute shell built-in commands like \fBdir\fR and \fBcopy\fR, @@ -289,134 +296,122 @@ the caller must prepend the desired command with because built-in commands are not implemented using executables. .RE .TP -\fBWindows 9x\fR +\fBUnix\fR (including Mac OS X) . -When attempting to execute an application, \fBexec\fR first searches for -the name as it was specified. Then, in order, \fB.com\fR, \fB.exe\fR, and -\fB.bat\fR are appended to the end of the specified name and it searches -for the longer name. If a directory name was not specified as part of the -application name, the following directories are automatically searched in -order when attempting to locate the application: -.RS -.IP \(bu -The directory from which the Tcl executable was loaded. -.IP \(bu -The current directory. -.IP \(bu -The Windows 9x system directory. -.IP \(bu -The Windows 9x home directory. -.IP \(bu -The directories listed in the path. -.RE -.RS -.PP -In order to execute shell built-in commands like \fBdir\fR and \fBcopy\fR, -the caller must prepend the desired command with -.QW "\fBcommand.com /c\0\fR" -because built-in commands are not implemented using executables. -.PP -Once a 16-bit DOS application has read standard input from a console and -then quit, all subsequently run 16-bit DOS applications will see the -standard input as already closed. 32-bit applications do not have this -problem and will run correctly, even after a 16-bit DOS application thinks -that standard input is closed. There is no known workaround for this bug -at this time. -.PP -Redirection between the \fBNUL:\fR device and a 16-bit application does not -always work. When redirecting from \fBNUL:\fR, some applications may hang, -others will get an infinite stream of -.QW 0x01 -bytes, and some will actually -correctly get an immediate end-of-file; the behavior seems to depend upon -something compiled into the application itself. When redirecting greater than -4K or so to \fBNUL:\fR, some applications will hang. The above problems do not -happen with 32-bit applications. -.PP -All DOS 16-bit applications are run synchronously. All standard input from -a pipe to a 16-bit DOS application is collected into a temporary file; the -other end of the pipe must be closed before the 16-bit DOS application -begins executing. All standard output or error from a 16-bit DOS -application to a pipe is collected into temporary files; the application -must terminate before the temporary files are redirected to the next stage -of the pipeline. This is due to a workaround for a Windows 95 bug in the -implementation of pipes, and is how the standard Windows 95 DOS shell -handles pipes itself. -.PP -Certain applications, such as \fBcommand.com\fR, should not be executed -interactively. Applications which directly access the console window, -rather than reading from their standard input and writing to their standard -output may fail, hang Tcl, or even hang the system if their own private -console window is not available to them. -.RE -.TP -\fBUnix\fR\0\0\0\0\0\0\0 The \fBexec\fR command is fully functional and works as described. .SH "UNIX EXAMPLES" -Here are some examples of the use of the \fBexec\fR command on Unix. .PP +Here are some examples of the use of the \fBexec\fR command on Unix. To execute a simple program and get its result: +.PP .CS \fBexec\fR uname -a .CE +.SS "WORKING WITH NON-ZERO RESULTS" .PP To execute a program that can return a non-zero result, you should wrap the call to \fBexec\fR in \fBcatch\fR and check the contents of the \fB\-errorcode\fR return option if you have an error: +.PP .CS set status 0 if {[catch {\fBexec\fR grep foo bar.txt} results options]} { - set details [dict get $options -errorcode] - if {[lindex $details 0] eq "CHILDSTATUS"} { - set status [lindex $details 2] - } else { - # Some kind of unexpected failure - } + set details [dict get $options -errorcode] + if {[lindex $details 0] eq "CHILDSTATUS"} { + set status [lindex $details 2] + } else { + # Some other error; regenerate it to let caller handle + return -options $options -level 0 $results + } } .CE +.VS 8.6 +.PP +This is more easily written using the \fBtry\fR command, as that makes +it simpler to trap specific types of errors. This is +done using code like this: +.PP +.CS +try { + set results [\fBexec\fR grep foo bar.txt] + set status 0 +} trap CHILDSTATUS {results options} { + set status [lindex [dict get $options -errorcode] 2] +} +.CE +.VE 8.6 +.SS "WORKING WITH QUOTED ARGUMENTS" .PP When translating a command from a Unix shell invocation, care should be taken over the fact that single quote characters have no special significance to Tcl. Thus: +.PP .CS awk '{sum += $1} END {print sum}' numbers.list .CE +.PP would be translated into something like: +.PP .CS \fBexec\fR awk {{sum += $1} END {print sum}} numbers.list .CE +.SS "WORKING WITH GLOBBING" .PP If you are converting invocations involving shell globbing, you should remember that Tcl does not handle globbing or expand things into multiple arguments by default. Instead you should write things like this: +.PP .CS \fBexec\fR ls -l {*}[glob *.tcl] .CE +.SS "WORKING WITH USER-SUPPLIED SHELL SCRIPT FRAGMENTS" +.PP +One useful technique can be to expose to users of a script the ability +to specify a fragment of shell script to execute that will have some +data passed in on standard input that was produced by the Tcl program. +This is a common technique for using the \fIlpr\fR program for +printing. By far the simplest way of doing this is to pass the user's +script to the user's shell for processing, as this avoids a lot of +complexity with parsing other languages. +.PP +.CS +set lprScript [\fIget from user...\fR] +set postscriptData [\fIgenerate somehow...\fR] + +\fBexec\fR $env(SHELL) -c $lprScript << $postscriptData +.CE .SH "WINDOWS EXAMPLES" -Here are some examples of the use of the \fBexec\fR command on Windows. .PP +Here are some examples of the use of the \fBexec\fR command on Windows. To start an instance of \fInotepad\fR editing a file without waiting for the user to finish editing the file: +.PP .CS \fBexec\fR notepad myfile.txt & .CE .PP To print a text file using \fInotepad\fR: +.PP .CS \fBexec\fR notepad /p myfile.txt .CE +.SS "WORKING WITH CONSOLE PROGRAMS" .PP If a program calls other programs, such as is common with compilers, then you may need to resort to batch files to hide the console windows that sometimes pop up: +.PP .CS \fBexec\fR cmp.bat somefile.c -o somefile .CE +.PP With the file \fIcmp.bat\fR looking something like: +.PP .CS @gcc %1 %2 %3 %4 %5 %6 %7 %8 %9 .CE +.SS "WORKING WITH COMMAND BUILT-INS" .PP Sometimes you need to be careful, as different programs may have the same name and be in the path. It can then happen that typing a command @@ -431,10 +426,27 @@ applies especially when you want to run commands like \fIdir\fR from a Tcl script (if you just want to list filenames, use the \fBglob\fR command.) To do that, use this: +.PP .CS \fBexec\fR {*}[auto_execok dir] *.tcl .CE +.SS "WORKING WITH NATIVE FILENAMES" +.PP +Many programs on Windows require filename arguments to be passed in with +backslashes as pathname separators. This is done with the help of the +\fBfile nativename\fR command. For example, to make a directory (on NTFS) +encrypted so that only the current user can access it requires use of +the \fICIPHER\fR command, like this: +.PP +.CS +set secureDir "~/Desktop/Secure Directory" +file mkdir $secureDir +\fBexec\fR CIPHER /e /s:[file nativename $secureDir] +.CE .SH "SEE ALSO" -error(n), open(n) +error(n), file(n), open(n) .SH KEYWORDS execute, pipeline, redirection, subprocess +'\" Local Variables: +'\" mode: nroff +'\" End: |