summaryrefslogtreecommitdiffstats
path: root/doc/expr.n
diff options
context:
space:
mode:
Diffstat (limited to 'doc/expr.n')
-rw-r--r--doc/expr.n323
1 files changed, 323 insertions, 0 deletions
diff --git a/doc/expr.n b/doc/expr.n
new file mode 100644
index 0000000..f0969ce
--- /dev/null
+++ b/doc/expr.n
@@ -0,0 +1,323 @@
+'\"
+'\" Copyright (c) 1993 The Regents of the University of California.
+'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
+'\"
+'\" See the file "license.terms" for information on usage and redistribution
+'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+'\"
+'\" SCCS: @(#) expr.n 1.28 97/09/18 18:21:30
+'\"
+.so man.macros
+.TH expr n 8.0 Tcl "Tcl Built-In Commands"
+.BS
+'\" Note: do not modify the .SH NAME line immediately below!
+.SH NAME
+expr \- Evaluate an expression
+.SH SYNOPSIS
+\fBexpr \fIarg \fR?\fIarg arg ...\fR?
+.BE
+
+.SH DESCRIPTION
+.PP
+Concatenates \fIarg\fR's (adding separator spaces between them),
+evaluates the result as a Tcl expression, and returns the value.
+The operators permitted in Tcl expressions are a subset of
+the operators permitted in C expressions, and they have the
+same meaning and precedence as the corresponding C operators.
+Expressions almost always yield numeric results
+(integer or floating-point values).
+For example, the expression
+.CS
+\fBexpr 8.2 + 6\fR
+.CE
+evaluates to 14.2.
+Tcl expressions differ from C expressions in the way that
+operands are specified. Also, Tcl expressions support
+non-numeric operands and string comparisons.
+.SH OPERANDS
+.PP
+A Tcl expression consists of a combination of operands, operators,
+and parentheses.
+White space may be used between the operands and operators and
+parentheses; it is ignored by the expression's instructions.
+Where possible, operands are interpreted as integer values.
+Integer values may be specified in decimal (the normal case), in octal (if the
+first character of the operand is \fB0\fR), or in hexadecimal (if the first
+two characters of the operand are \fB0x\fR).
+If an operand does not have one of the integer formats given
+above, then it is treated as a floating-point number if that is
+possible. Floating-point numbers may be specified in any of the
+ways accepted by an ANSI-compliant C compiler (except that the
+\fBf\fR, \fBF\fR, \fBl\fR, and \fBL\fR suffixes will not be permitted in
+most installations). For example, all of the
+following are valid floating-point numbers: 2.1, 3., 6e4, 7.91e+16.
+If no numeric interpretation is possible, then an operand is left
+as a string (and only a limited set of operators may be applied to
+it).
+.PP
+Operands may be specified in any of the following ways:
+.IP [1]
+As an numeric value, either integer or floating-point.
+.IP [2]
+As a Tcl variable, using standard \fB$\fR notation.
+The variable's value will be used as the operand.
+.IP [3]
+As a string enclosed in double-quotes.
+The expression parser will perform backslash, variable, and
+command substitutions on the information between the quotes,
+and use the resulting value as the operand
+.IP [4]
+As a string enclosed in braces.
+The characters between the open brace and matching close brace
+will be used as the operand without any substitutions.
+.IP [5]
+As a Tcl command enclosed in brackets.
+The command will be executed and its result will be used as
+the operand.
+.IP [6]
+As a mathematical function whose arguments have any of the above
+forms for operands, such as \fBsin($x)\fR. See below for a list of defined
+functions.
+.LP
+Where substitutions occur above (e.g. inside quoted strings), they
+are performed by the expression's instructions.
+However, an additional layer of substitution may already have
+been performed by the command parser before the expression
+processor was called.
+As discussed below, it is usually best to enclose expressions
+in braces to prevent the command parser from performing substitutions
+on the contents.
+.PP
+For some examples of simple expressions, suppose the variable
+\fBa\fR has the value 3 and
+the variable \fBb\fR has the value 6.
+Then the command on the left side of each of the lines below
+will produce the value on the right side of the line:
+.CS
+.ta 6c
+\fBexpr 3.1 + $a 6.1
+expr 2 + "$a.$b" 5.6
+expr 4*[llength "6 2"] 8
+expr {{word one} < "word $a"} 0\fR
+.CE
+.SH OPERATORS
+.PP
+The valid operators are listed below, grouped in decreasing order
+of precedence:
+.TP 20
+\fB\-\0\0+\0\0~\0\0!\fR
+Unary minus, unary plus, bit-wise NOT, logical NOT. None of these operands
+may be applied to string operands, and bit-wise NOT may be
+applied only to integers.
+.TP 20
+\fB*\0\0/\0\0%\fR
+Multiply, divide, remainder. None of these operands may be
+applied to string operands, and remainder may be applied only
+to integers.
+The remainder will always have the same sign as the divisor and
+an absolute value smaller than the divisor.
+.TP 20
+\fB+\0\0\-\fR
+Add and subtract. Valid for any numeric operands.
+.TP 20
+\fB<<\0\0>>\fR
+Left and right shift. Valid for integer operands only.
+A right shift always propagates the sign bit.
+.TP 20
+\fB<\0\0>\0\0<=\0\0>=\fR
+Boolean less, greater, less than or equal, and greater than or equal.
+Each operator produces 1 if the condition is true, 0 otherwise.
+These operators may be applied to strings as well as numeric operands,
+in which case string comparison is used.
+.TP 20
+\fB==\0\0!=\fR
+Boolean equal and not equal. Each operator produces a zero/one result.
+Valid for all operand types.
+.TP 20
+\fB&\fR
+Bit-wise AND. Valid for integer operands only.
+.TP 20
+\fB^\fR
+Bit-wise exclusive OR. Valid for integer operands only.
+.TP 20
+\fB|\fR
+Bit-wise OR. Valid for integer operands only.
+.TP 20
+\fB&&\fR
+Logical AND. Produces a 1 result if both operands are non-zero,
+0 otherwise.
+Valid for boolean and numeric (integers or floating-point) operands only.
+.TP 20
+\fB||\fR
+Logical OR. Produces a 0 result if both operands are zero, 1 otherwise.
+Valid for boolean and numeric (integers or floating-point) operands only.
+.TP 20
+\fIx\fB?\fIy\fB:\fIz\fR
+If-then-else, as in C. If \fIx\fR
+evaluates to non-zero, then the result is the value of \fIy\fR.
+Otherwise the result is the value of \fIz\fR.
+The \fIx\fR operand must have a numeric value.
+.LP
+See the C manual for more details on the results
+produced by each operator.
+All of the binary operators group left-to-right within the same
+precedence level. For example, the command
+.CS
+\fBexpr 4*2 < 7\fR
+.CE
+returns 0.
+.PP
+The \fB&&\fR, \fB||\fR, and \fB?:\fR operators have ``lazy
+evaluation'', just as in C,
+which means that operands are not evaluated if they are
+not needed to determine the outcome. For example, in the command
+.CS
+\fBexpr {$v ? [a] : [b]}\fR
+.CE
+only one of \fB[a]\fR or \fB[b]\fR will actually be evaluated,
+depending on the value of \fB$v\fR. Note, however, that this is
+only true if the entire expression is enclosed in braces; otherwise
+the Tcl parser will evaluate both \fB[a]\fR and \fB[b]\fR before
+invoking the \fBexpr\fR command.
+.SH "MATH FUNCTIONS"
+.PP
+Tcl supports the following mathematical functions in expressions:
+.DS
+.ta 3c 6c 9c
+\fBacos\fR \fBcos\fR \fBhypot\fR \fBsinh\fR
+\fBasin\fR \fBcosh\fR \fBlog\fR \fBsqrt\fR
+\fBatan\fR \fBexp\fR \fBlog10\fR \fBtan\fR
+\fBatan2\fR \fBfloor\fR \fBpow\fR \fBtanh\fR
+\fBceil\fR \fBfmod\fR \fBsin\fR
+.DE
+Each of these functions invokes the math library function of the same
+name; see the manual entries for the library functions for details
+on what they do. Tcl also implements the following functions for
+conversion between integers and floating-point numbers and the
+generation of random numbers:
+.TP
+\fBabs(\fIarg\fB)\fR
+Returns the absolute value of \fIarg\fR. \fIArg\fR may be either
+integer or floating-point, and the result is returned in the same form.
+.TP
+\fBdouble(\fIarg\fB)\fR
+If \fIarg\fR is a floating value, returns \fIarg\fR, otherwise converts
+\fIarg\fR to floating and returns the converted value.
+.TP
+\fBint(\fIarg\fB)\fR
+If \fIarg\fR is an integer value, returns \fIarg\fR, otherwise converts
+\fIarg\fR to integer by truncation and returns the converted value.
+.TP
+\fBrand()\fR
+Returns a floating point number from zero to just less than one or,
+in mathematical terms, the range [0,1). The seed comes from the
+internal clock of the machine or may be set manual with the srand
+function.
+.TP
+\fBround(\fIarg\fB)\fR
+If \fIarg\fR is an integer value, returns \fIarg\fR, otherwise converts
+\fIarg\fR to integer by rounding and returns the converted value.
+.TP
+\fBsrand(\fIarg\fB)\fR
+The \fIarg\fR, which must be an integer, is used to reset the seed for
+the random number generator. Returns the first random number from
+that seed. Each interpreter has it's own seed.
+.PP
+In addition to these predefined functions, applications may
+define additional functions using \fBTcl_CreateMathFunc\fR().
+.SH "TYPES, OVERFLOW, AND PRECISION"
+.PP
+All internal computations involving integers are done with the C type
+\fIlong\fR, and all internal computations involving floating-point are
+done with the C type \fIdouble\fR.
+When converting a string to floating-point, exponent overflow is
+detected and results in a Tcl error.
+For conversion to integer from string, detection of overflow depends
+on the behavior of some routines in the local C library, so it should
+be regarded as unreliable.
+In any case, integer overflow and underflow are generally not detected
+reliably for intermediate results. Floating-point overflow and underflow
+are detected to the degree supported by the hardware, which is generally
+pretty reliable.
+.PP
+Conversion among internal representations for integer, floating-point,
+and string operands is done automatically as needed.
+For arithmetic computations, integers are used until some
+floating-point number is introduced, after which floating-point is used.
+For example,
+.CS
+\fBexpr 5 / 4\fR
+.CE
+returns 1, while
+.CS
+\fBexpr 5 / 4.0\fR
+\fBexpr 5 / ( [string length "abcd"] + 0.0 )\fR
+.CE
+both return 1.25.
+Floating-point values are always returned with a ``\fB.\fR''
+or an \fBe\fR so that they will not look like integer values. For
+example,
+.CS
+\fBexpr 20.0/5.0\fR
+.CE
+returns \fB4.0\fR, not \fB4\fR.
+
+.SH "STRING OPERATIONS"
+.PP
+String values may be used as operands of the comparison operators,
+although the expression evaluator tries to do comparisons as integer
+or floating-point when it can.
+If one of the operands of a comparison is a string and the other
+has a numeric value, the numeric operand is converted back to
+a string using the C \fIsprintf\fR format specifier
+\fB%d\fR for integers and \fB%g\fR for floating-point values.
+For example, the commands
+.CS
+\fBexpr {"0x03" > "2"}\fR
+\fBexpr {"0y" < "0x12"}\fR
+.CE
+both return 1. The first comparison is done using integer
+comparison, and the second is done using string comparison after
+the second operand is converted to the string \fB18\fR.
+Because of Tcl's tendency to treat values as numbers whenever
+possible, it isn't generally a good idea to use operators like \fB==\fR
+when you really want string comparison and the values of the
+operands could be arbitrary; it's better in these cases to use the
+\fBstring compare\fR command instead.
+
+.SH "PERFORMANCE CONSIDERATIONS"
+.VS
+.PP
+Enclose expressions in braces for the best speed and the smallest
+storage requirements.
+This allows the Tcl bytecode compiler to generate the best code.
+.PP
+As mentioned above, expressions are substituted twice:
+once by the Tcl parser and once by the \fBexpr\fR command.
+For example, the commands
+.CS
+\fBset a 3\fR
+\fBset b {$a + 2}\fR
+\fBexpr $b*4\fR
+.CE
+return 11, not a multiple of 4.
+This is because the Tcl parser will first substitute \fB$a + 2\fR for
+the variable \fBb\fR,
+then the \fBexpr\fR command will evaluate the expression \fB$a + 2*4\fR.
+.PP
+Most expressions do not require a second round of substitutions.
+Either they are enclosed in braces or, if not,
+their variable and command substitutions yield numbers or strings
+that don't themselves require substitutions.
+However, because a few unbraced expressions
+need two rounds of substitutions,
+the bytecode compiler must emit
+additional instructions to handle this situation.
+The most expensive code is required for
+unbraced expressions that contain command substitutions.
+These expressions must be implemented by generating new code
+each time the expression is executed.
+.VE
+
+.SH KEYWORDS
+arithmetic, boolean, compare, expression, fuzzy comparison