summaryrefslogtreecommitdiffstats
path: root/doc/regexp.n
diff options
context:
space:
mode:
Diffstat (limited to 'doc/regexp.n')
-rw-r--r--doc/regexp.n906
1 files changed, 5 insertions, 901 deletions
diff --git a/doc/regexp.n b/doc/regexp.n
index 2f6c4b6..03010e3 100644
--- a/doc/regexp.n
+++ b/doc/regexp.n
@@ -4,7 +4,7 @@
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
-'\" RCS: @(#) $Id: regexp.n,v 1.5 1999/05/06 19:14:42 stanton Exp $
+'\" RCS: @(#) $Id: regexp.n,v 1.6 1999/06/24 21:15:13 jpeek Exp $
'\"
.so man.macros
.TH regexp n 8.1 Tcl "Tcl Built-In Commands"
@@ -21,6 +21,8 @@ regexp \- Match a regular expression against a string
.PP
Determines whether the regular expression \fIexp\fR matches part or
all of \fIstring\fR and returns 1 if it does, 0 if it doesn't.
+(Regular expression matching is described in the \fBre_syntax\fR
+reference page.)
.LP
If additional arguments are specified after \fIstring\fR then they
are treated as the names of variables in which to return
@@ -93,906 +95,8 @@ portion of the expression that wasn't matched), then the corresponding
\fIsubMatchVar\fR will be set to ``\fB\-1 \-1\fR'' if \fB\-indices\fR
has been specified or to an empty string otherwise.
-.SH "DIFFERENT FLAVORS OF REs"
-.VS 8.1
-Regular expressions (``RE''s), as defined by POSIX, come in two
-flavors: \fIextended\fR REs (``EREs'') and \fIbasic\fR REs (``BREs'').
-EREs are roughly those of the traditional \fIegrep\fR, while BREs are
-roughly those of the traditional \fIed\fR . This implementation adds
-a third flavor, \fIadvanced\fR REs (``AREs''), basically EREs with
-some significant extensions.
-.PP
-This manual page primarily describes AREs. BREs mostly exist for
-backward compatibility in some old programs; they will be discussed at
-the end. POSIX EREs are almost an exact subset of AREs. Features of
-AREs that are not present in EREs will be indicated.
-
-.SH "REGULAR EXPRESSION SYNTAX"
-.PP
-Tcl regular expressions are implemented using the package written by
-Henry Spencer, based on the 1003.2 spec and some (not quite all) of
-the Perl5 extensions (thanks, Henry!). Much of the description of
-regular expressions below is copied verbatim from his manual entry.
-.PP
-An ARE is one or more \fIbranches\fR,
-separated by `\fB|\fR',
-matching anything that matches any of the branches.
-.PP
-A branch is zero or more \fIconstraints\fR or \fIquantified atoms\fR,
-concatenated.
-It matches a match for the first, followed by a match for the second, etc;
-an empty branch matches the empty string.
-.PP
-A quantified atom is an \fIatom\fR possibly followed
-by a single \fIquantifier\fR.
-Without a quantifier, it matches a match for the atom.
-The quantifiers,
-and what a so-quantified atom matches, are:
-.RS 2
-.TP 6
-\fB*\fR
-a sequence of 0 or more matches of the atom
-.TP
-\fB+\fR
-a sequence of 1 or more matches of the atom
-.TP
-\fB?\fR
-a sequence of 0 or 1 matches of the atom
-.TP
-\fB{\fIm\fB}\fR
-a sequence of exactly \fIm\fR matches of the atom
-.TP
-\fB{\fIm\fB,}\fR
-a sequence of \fIm\fR or more matches of the atom
-.TP
-\fB{\fIm\fB,\fIn\fB}\fR
-a sequence of \fIm\fR through \fIn\fR (inclusive) matches of the atom;
-\fIm\fR may not exceed \fIn\fR
-.TP
-\fB*? +? ?? {\fIm\fB}? {\fIm\fB,}? {\fIm\fB,\fIn\fB}?\fR
-\fInon-greedy\fR quantifiers,
-which match the same possibilities,
-but prefer the smallest number rather than the largest number
-of matches (see MATCHING)
-.RE
-.PP
-The forms using
-\fB{\fR and \fB}\fR
-are known as \fIbound\fRs.
-The numbers
-\fIm\fR and \fIn\fR are unsigned decimal integers
-with permissible values from 0 to 255 inclusive.
-.PP
-An atom is one of:
-.RS 2
-.TP 6
-\fB(\fIre\fB)\fR
-(where \fIre\fR is any regular expression)
-matches a match for
-\fIre\fR, with the match noted for possible reporting
-.TP
-\fB(?:\fIre\fB)\fR
-as previous,
-but does no reporting
-(a ``non-capturing'' set of parentheses)
-.TP
-\fB()\fR
-matches an empty string,
-noted for possible reporting
-.TP
-\fB(?:)\fR
-matches an empty string,
-without reporting
-.TP
-\fB[\fIchars\fB]\fR
-a \fIbracket expression\fR,
-matching any one of the \fIchars\fR (see BRACKET EXPRESSIONS for more detail)
-.TP
- \fB.\fR
-matches any single character
-.TP
-\fB\e\fIk\fR
-(where \fIk\fR is a non-alphanumeric character)
-matches that character taken as an ordinary character,
-e.g. \e\e matches a backslash character
-.TP
-\fB\e\fIc\fR
-where \fIc\fR is alphanumeric
-(possibly followed by other characters),
-an \fIescape\fR (AREs only),
-see ESCAPES below
-.TP
-\fB{\fR
-when followed by a character other than a digit,
-matches the left-brace character `\fB{\fR';
-when followed by a digit, it is the beginning of a
-\fIbound\fR (see above)
-.TP
-\fIx\fR
-where \fIx\fR is
-a single character with no other significance, matches that character.
-.RE
-.PP
-A \fIconstraint\fR matches an empty string when specific conditions
-are met.
-A constraint may not be followed by a quantifier.
-The simple constraints are as follows; some more constraints are
-described later, under ESCAPES.
-.RS 2
-.TP 8
-\fB^\fR
-matches at the beginning of a line
-.TP
-\fB$\fR
-matches at the end of a line
-.TP
-\fB(?=\fIre\fB)\fR
-\fIpositive lookahead\fR (AREs only), matches at any point
-where a substring matching \fIre\fR begins
-.TP
-\fB(?!\fIre\fB)\fR
-\fInegative lookahead\fR (AREs only), matches at any point
-where no substring matching \fIre\fR begins
-.RE
-.PP
-The lookahead constraints may not contain back references (see later),
-and all parentheses within them are considered non-capturing.
-.PP
-An RE may not end with `\fB\e\fR'.
-
-.SH "BRACKET EXPRESSIONS"
-A \fIbracket expression\fR is a list of characters enclosed in `\fB[\|]\fR'.
-It normally matches any single character from the list (but see below).
-If the list begins with `\fB^\fR',
-it matches any single character
-(but see below) \fInot\fR from the rest of the list.
-.PP
-If two characters in the list are separated by `\fB\-\fR',
-this is shorthand
-for the full \fIrange\fR of characters between those two (inclusive) in the
-collating sequence,
-e.g.
-\fB[0\-9]\fR
-in ASCII matches any decimal digit.
-Two ranges may not share an
-endpoint, so e.g.
-\fBa\-c\-e\fR
-is illegal.
-Ranges are very collating-sequence-dependent,
-and portable programs should avoid relying on them.
-.PP
-To include a literal
-\fB]\fR
-or
-\fB\-\fR
-in the list,
-the simplest method is to
-enclose it in
-\fB[.\fR
-and
-\fB.]\fR
-to make it a collating element (see below).
-Alternatively,
-make it the first character
-(following a possible `\fB^\fR'),
-or (AREs only) precede it with `\fB\e\fR'.
-Alternatively, for `\fB\-\fR',
-make it the last character,
-or the second endpoint of a range.
-To use a literal
-\fB\-\fR
-as the first endpoint of a range,
-make it a collating element
-or (AREs only) precede it with `\fB\e\fR'.
-With the exception of these, some combinations using
-\fB[\fR
-(see next
-paragraphs), and escapes,
-all other special characters lose their
-special significance within a bracket expression.
-.PP
-Within a bracket expression, a collating element (a character,
-a multi-character sequence that collates as if it were a single character,
-or a collating-sequence name for either)
-enclosed in
-\fB[.\fR
-and
-\fB.]\fR
-stands for the
-sequence of characters of that collating element.
-The sequence is a single element of the bracket expression's list.
-A bracket expression in a locale which has
-multi-character collating elements
-can thus match more than one character.
-Most insidiously, if
-\fB^\fR
-is used,
-this can happen even if no multi-character collating
-elements appear in the bracket expression!
-If the collating sequence includes a
-\fBch\fR
-multi-character collating element,
-then the RE
-\fB[[.ch.]]*c\fR
-matches the first five characters
-of `\fBchchcc\fR',
-and the RE
-\fB[^c]b\fR
-matches all of `\fBchb\fR'.
-.PP
-Within a bracket expression, a collating element enclosed in
-\fB[=\fR
-and
-\fB=]\fR
-is an equivalence class, standing for the sequences of characters
-of all collating elements equivalent to that one, including itself.
-(If there are no other equivalent collating elements,
-the treatment is as if the enclosing delimiters were `\fB[.\fR'\&
-and `\fB.]\fR'.)
-For example, if
-\fBo\fR
-and
-\fB\o'o^'\fR
-are the members of an equivalence class,
-then `\fB[[=o=]]\fR', `\fB[[=\o'o^'=]]\fR',
-and `\fB[o\o'o^']\fR'\&
-are all synonymous.
-An equivalence class may not be an endpoint
-of a range.
-.PP
-Within a bracket expression, the name of a \fIcharacter class\fR enclosed
-in
-\fB[:\fR
-and
-\fB:]\fR
-stands for the list of all characters
-(not all collating elements!)
-belonging to that
-class.
-Standard character class names are:
-.PP
-.RS
-.ne 5
-.nf
-.ta 3c 6c 9c
-\fBalnum digit punct
-alpha graph space
-blank lower upper
-cntrl print xdigit\fR
-.fi
-.RE
-.PP
-These stand for the character classes defined in
-\fIctype\fR(3).
-A locale may provide others.
-A character class may not be used as an endpoint of a range.
-.PP
-There are two special cases of bracket expressions:
-the bracket expressions
-\fB[[:<:]]\fR
-and
-\fB[[:>:]]\fR
-are constraints, matching empty strings at
-the beginning and end of a word respectively.
-'\" note, discussion of escapes below references this definition of word
-A word is defined as a sequence of
-word characters
-which is neither preceded nor followed by
-word characters.
-A word character is an
-\fIalnum\fR
-character (as defined by
-\fIctype\fR(3))
-or an underscore
-(\fB_\fR).
-These special bracket expressions are deprecated;
-users of AREs should use constraint escapes instead (see below).
-.SH ESCAPES
-Escapes (AREs only), which begin with a
-\fB\e\fR
-followed by an alphanumeric character,
-come in several varieties:
-character entry, class shorthands, constraint escapes, and back references.
-A
-\fB\e\fR
-followed by an alphanumeric character but not constituting
-a valid escape is illegal in AREs.
-In EREs, there are no escapes:
-outside a bracket expression,
-a
-\fB\e\fR
-followed by an alphanumeric character merely stands for that
-character as an ordinary character,
-and inside a bracket expression,
-\fB\e\fR
-is an ordinary character.
-(The latter is the one actual incompatibility between EREs and AREs.)
-.PP
-Character-entry escapes (AREs only) exist to make it easier to specify
-non-printing and otherwise inconvenient characters in REs:
-.RS 2
-.TP 5
-\fB\ea\fR
-alert, aka bell, character, as in C
-.TP
-\fB\eb\fR
-backspace, as in C
-.TP
-\fB\eB\fR
-synonym for
-\fB\e\fR
-to help reduce backslash doubling in some
-applications where there are multiple levels of backslash processing
-.TP
-\fB\ec\fIX\fR
-(where X is any character) the character whose
-low-order 5 bits are the same as those of
-\fIX\fR,
-and whose other bits are all zero
-.TP
-\fB\ee\fR
-the character whose collating-sequence name
-is `\fBESC\fR',
-or failing that, the character with octal value 033
-.TP
-\fB\ef\fR
-formfeed, as in C
-.TP
-\fB\en\fR
-newline, as in C
-.TP
-\fB\er\fR
-carriage return, as in C
-.TP
-\fB\et\fR
-horizontal tab, as in C
-.TP
-\fB\eu\fIwxyz\fR
-(where
-\fIwxyz\fR
-is exactly four hexadecimal digits)
-the Unicode character
-\fBU+\fIwxyz\fR
-in the local byte ordering
-.TP
-\fB\eU\fIstuvwxyz\fR
-(where
-\fIstuvwxyz\fR
-is exactly eight hexadecimal digits)
-reserved for a somewhat-hypothetical Unicode extension to 32 bits
-.TP
-\fB\ev\fR
-vertical tab, as in C
-are all available.
-.TP
-\fB\ex\fIhhh\fR
-(where
-\fIhhh\fR
-is any sequence of hexadecimal digits)
-the character whose hexadecimal value is
-\fB0x\fIhhh\fR
-(a single character no matter how many hexadecimal digits are used).
-.TP
-\fB\e0\fR
-the character whose value is
-\fB0\fR
-.TP
-\fB\e\fIxy\fR
-(where
-\fIxy\fR
-is exactly two octal digits,
-and is not a
-\fIback reference\fR (see below))
-the character whose octal value is
-\fB0\fIxy\fR
-.TP
-\fB\e\fIxyz\fR
-(where
-\fIxyz\fR
-is exactly three octal digits,
-and is not a
-back reference (see below))
-the character whose octal value is
-\fB0\fIxyz\fR
-.RE
-.PP
-Hexadecimal digits are `\fB0\fR'-`\fB9\fR', `\fBa\fR'-`\fBf\fR',
-and `\fBA\fR'-`\fBF\fR'.
-Octal digits are `\fB0\fR'-`\fB7\fR'.
-.PP
-The character-entry escapes are always taken as ordinary characters.
-For example,
-\fB\e135\fR
-is
-\fB]\fR
-in ASCII,
-but
-\fB\e135\fR
-does not terminate a bracket expression.
-Beware, however, that some applications (e.g., C compilers) interpret
-such sequences themselves before the regular-expression package
-gets to see them, which may require doubling (quadrupling, etc.) the `\fB\e\fR'.
-.PP
-Class-shorthand escapes (AREs only) provide shorthands for certain commonly-used
-character classes:
-.RS 2
-.TP 10
-\fB\ed\fR
-\fB[[:digit:]]\fR
-.TP
-\fB\es\fR
-\fB[[:space:]]\fR
-.TP
-\fB\ew\fR
-\fB[[:alnum:]_]\fR
-(note underscore)
-.TP
-\fB\eD\fR
-\fB[^[:digit:]]\fR
-.TP
-\fB\eS\fR
-\fB[^[:space:]]\fR
-.TP
-\fB\eW\fR
-\fB[^[:alnum:]_]\fR
-(note underscore)
-.RE
-.PP
-Within bracket expressions, `\fB\ed\fR', `\fB\es\fR',
-and `\fB\ew\fR'\&
-lose their outer brackets,
-and `\fB\eD\fR', `\fB\eS\fR',
-and `\fB\eW\fR'\&
-are illegal.
-.PP
-A constraint escape (AREs only) is a constraint,
-matching the empty string if specific conditions are met,
-written as an escape:
-.RS 2
-.TP 6
-\fB\eA\fR
-matches only at the beginning of the string
-(see MATCHING, below, for how this differs from `\fB^\fR')
-.TP
-\fB\em\fR
-matches only at the beginning of a word
-.TP
-\fB\eM\fR
-matches only at the end of a word
-.TP
-\fB\ey\fR
-matches only at the beginning or end of a word
-.TP
-\fB\eY\fR
-matches only at a point which is not the beginning or end of a word
-.TP
-\fB\eZ\fR
-matches only at the end of the string
-(see MATCHING, below, for how this differs from `\fB$\fR')
-.TP
-\fB\e\fIm\fR
-(where
-\fIm\fR
-is a nonzero digit) a \fIback reference\fR, see below
-.TP
-\fB\e\fImnn\fR
-(where
-\fIm\fR
-is a nonzero digit, and
-\fInn\fR
-is some more digits,
-and the decimal value
-\fImnn\fR
-is not greater than the number of closing capturing parentheses seen so far)
-a \fIback reference\fR, see below
-.RE
-.PP
-A word is defined as in the specification of
-\fB[[:<:]]\fR
-and
-\fB[[:>:]]\fR
-above.
-Constraint escapes are illegal within bracket expressions.
-.PP
-A back reference (AREs only) matches the same string matched by the parenthesized
-subexpression specified by the number,
-so that (e.g.)
-\fB([bc])\e1\fR
-matches
-\fBbb\fR
-or
-\fBcc\fR
-but not `\fBbc\fR'.
-The subexpression must entirely precede the back reference in the RE.
-Subexpressions are numbered in the order of their leading parentheses.
-Non-capturing parentheses do not define subexpressions.
-.PP
-There is an inherent historical ambiguity between octal character-entry
-escapes and back references, which is resolved by heuristics,
-as hinted at above.
-A leading zero always indicates an octal escape.
-A single non-zero digit, not followed by another digit,
-is always taken as a back reference.
-A multi-digit sequence not starting with a zero is taken as a back
-reference if it comes after a suitable subexpression
-(i.e. the number is in the legal range for a back reference),
-and otherwise is taken as octal.
-.SH "METASYNTAX"
-In addition to the main syntax described above, there are some special
-forms and miscellaneous syntactic facilities available.
-.PP
-Normally the flavor of RE being used is specified by
-application-dependent means.
-However, this can be overridden by a \fIdirector\fR.
-If an RE of any flavor begins with `\fB***:\fR',
-the rest of the RE is an ARE.
-If an RE of any flavor begins with `\fB***=\fR',
-the rest of the RE is taken to be a literal string,
-with all characters considered ordinary characters.
-.PP
-An ARE may begin with \fIembedded options\fR:
-a sequence
-\fB(?\fIxyz\fB)\fR
-(where
-\fIxyz\fR
-is one or more alphabetic characters)
-specifies options affecting the rest of the RE.
-These supplement, and can override,
-any options specified by the application.
-The available option letters are:
-.RS 2
-.TP 3
-\fBb\fR
-rest of RE is a BRE
-.TP 3
-\fBc\fR
-case-sensitive matching (usual default)
-.TP 3
-\fBe\fR
-rest of RE is an ERE
-.TP 3
-\fBi\fR
-case-insensitive matching (see MATCHING, below)
-.TP 3
-\fBm\fR
-historical synonym for
-\fBn\fR
-.TP 3
-\fBn\fR
-newline-sensitive matching (see MATCHING, below)
-.TP 3
-\fBp\fR
-partial newline-sensitive matching (see MATCHING, below)
-.TP 3
-\fBq\fR
-rest of RE is a literal (``quoted'') string, all ordinary characters
-.TP 3
-\fBs\fR
-non-newline-sensitive matching (usual default)
-.TP 3
-\fBt\fR
-tight syntax (usual default; see below)
-.TP 3
-\fBw\fR
-inverse partial newline-sensitive (``weird'') matching (see MATCHING, below)
-.TP 3
-\fBx\fR
-expanded syntax (see below)
-.RE
-.PP
-Embedded options take effect at the
-\fB)\fR
-terminating the sequence.
-They are available only at the start of an ARE,
-and may not be used later within it.
-.PP
-In addition to the usual (\fItight\fR) RE syntax, in which all characters are
-significant, there is an \fIexpanded\fR syntax,
-available in all flavors of RE
-with the \fB-expanded\fR switch, or in AREs with the embedded x option.
-In the expanded syntax,
-white-space characters are ignored
-and all characters between a
-\fB#\fR
-and the following newline (or the end of the RE) are ignored,
-permitting paragraphing and commenting a complex RE.
-There are three exceptions to that basic rule:
-.RS 2
-.PP
-a white-space character or `\fB#\fR' preceded by `\fB\e\fR' is retained
-.PP
-white space or `\fB#\fR' within a bracket expression is retained
-.PP
-white space and comments are illegal within multi-character symbols
-like the ARE `\fB(?:\fR' or the BRE `\fB\e(\fR'
-.RE
-.PP
-Expanded-syntax
-white-space characters are blank, tab, newline, etc. (any character
-defined as \fIspace\fR by
-\fIctype\fR(3)).
-Exactly how a multi-line expanded-syntax RE
-can be entered interactively by a user,
-if at all, is application-specific;
-expanded syntax is primarily a scripting facility.
-.PP
-Finally, in an ARE,
-outside bracket expressions, the sequence `\fB(?#\fIttt\fB)\fR'
-(where
-\fIttt\fR
-is any text not containing a `\fB)\fR')
-is a comment,
-completely ignored.
-Again, this is not allowed between the characters of
-multi-character symbols like `\fB(?:\fR'.
-Such comments are more a historical artifact than a useful facility,
-and their use is deprecated;
-use the expanded syntax instead.
-.PP
-\fINone\fR of these metasyntax extensions is available if the application
-(or an initial
-\fB***=\fR
-director)
-has specified that the user's input be treated as a literal string
-rather than as an RE.
-.SH MATCHING
-In the event that an RE could match more than one substring of a given
-string,
-the RE matches the one starting earliest in the string.
-If the RE could match more than one substring starting at that point,
-its choice is determined by its \fIpreference\fR:
-either the longest substring, or the shortest.
-.PP
-Most atoms, and all constraints, have no preference.
-A parenthesized RE has the same preference (possibly none) as the RE.
-A quantified atom with quantifier
-\fB{\fIm\fB}\fR
-or
-\fB{\fIm\fB}?\fR
-has the same preference (possibly none) as the atom itself.
-A quantified atom with other normal quantifiers (including
-\fB{\fIm\fB,\fIn\fB}\fR
-with
-\fIm\fR
-equal to
-\fIn\fR)
-prefers longest match.
-A quantified atom with other non-greedy quantifiers (including
-\fB{\fIm\fB,\fIn\fB}?\fR
-with
-\fIm\fR
-equal to
-\fIn\fR)
-prefers shortest match.
-A branch has the same preference as the first quantified atom in it
-which has a preference.
-An RE consisting of two or more branches connected by the
-\fB|\fR
-operator prefers longest match.
-.PP
-Subject to the constraints imposed by the rules for matching the whole RE,
-subexpressions also match the longest or shortest possible substrings,
-based on their preferences,
-with subexpressions starting earlier in the RE taking priority over
-ones starting later.
-Note that outer subexpressions thus take priority over
-their component subexpressions.
-.PP
-Note that the quantifiers
-\fB{1,1}\fR
-and
-\fB{1,1}?\fR
-can be used to force longest and shortest preference, respectively,
-on a subexpression or a whole RE.
-.PP
-Match lengths are measured in characters, not collating elements.
-An empty string is considered longer than no match at all.
-For example,
-\fBbb*\fR
-matches the three middle characters of `\fBabbbc\fR',
-\fB(week|wee)(night|knights)\fR
-matches all ten characters of `\fBweeknights\fR',
-when
-\fB(.*).*\fR
-is matched against
-\fBabc\fR
-the parenthesized subexpression
-matches all three characters, and
-when
-\fB(a*)*\fR
-is matched against
-\fBbc\fR
-both the whole RE and the parenthesized
-subexpression match an empty string.
-.PP
-If case-independent matching is specified,
-the effect is much as if all case distinctions had vanished from the
-alphabet.
-When an alphabetic that exists in multiple cases appears as an
-ordinary character outside a bracket expression, it is effectively
-transformed into a bracket expression containing both cases,
-so that
-\fBx\fR
-becomes `\fB[xX]\fR'.
-When it appears inside a bracket expression, all case counterparts
-of it are added to the bracket expression, so that
-\fB[x]\fR
-becomes
-\fB[xX]\fR
-and
-\fB[^x]\fR
-becomes `\fB[^xX]\fR'.
-.PP
-If newline-sensitive matching is specified,
-\fB.\fR
-and bracket expressions using
-\fB^\fR
-will never match the newline character
-(so that matches will never cross newlines unless the RE
-explicitly arranges it)
-and
-\fB^\fR
-and
-\fB$\fR
-will match the empty string after and before a newline
-respectively, in addition to matching at beginning and end of string
-respectively.
-ARE
-\fB\eA\fR
-and
-\fB\eZ\fR
-continue to match beginning or end of string \fIonly\fR.
-.PP
-If partial newline-sensitive matching is specified,
-this affects
-\fB.\fR
-and bracket expressions
-as with newline-sensitive matching, but not
-\fB^\fR
-and `\fB$\fR'.
-.PP
-If inverse partial newline-sensitive matching is specified,
-this affects
-\fB^\fR
-and
-\fB$\fR
-as with
-newline-sensitive matching,
-but not
-\fB.\fR
-and bracket expressions.
-This isn't very useful but is provided for symmetry.
-.SH "LIMITS AND COMPATIBILITY"
-No particular limit is imposed on the length of REs.
-Programs intended to be highly portable should not employ REs longer
-than 256 bytes,
-as a POSIX-compliant implementation can refuse to accept such REs.
-.PP
-The only feature of AREs that is actually incompatible with
-POSIX EREs is that
-\fB\e\fR
-does not lose its special
-significance inside bracket expressions.
-All other ARE features use syntax which is illegal or has
-undefined or unspecified effects in POSIX EREs;
-the
-\fB***\fR
-syntax of directors likewise is outside the POSIX
-syntax for both BREs and EREs.
-.PP
-Many of the ARE extensions are borrowed from Perl, but some have
-been changed to clean them up, and a few Perl extensions are not present.
-Incompatibilities of note include `\fB\eb\fR', `\fB\eB\fR',
-the lack of special treatment for a trailing newline,
-the addition of complemented bracket expressions to the things
-affected by newline-sensitive matching,
-the restrictions on parentheses and back references in lookahead constraints,
-and the longest/shortest-match (rather than first-match) matching semantics.
-.PP
-The matching rules for REs containing both normal and non-greedy quantifiers
-have changed since early beta-test versions of this package.
-(The new rules are much simpler and cleaner,
-but don't work as hard at guessing the user's real intentions.)
-.PP
-Henry Spencer's original 1986 \fIregexp\fR package,
-still in widespread use (e.g., in pre-8.1 releases of Tcl),
-implemented an early version of today's EREs.
-There are four incompatibilities between \fIregexp\fR's near-EREs
-(`RREs' for short) and AREs.
-In roughly increasing order of significance:
-.PP
-.RS
-In AREs,
-\fB\e\fR
-followed by an alphanumeric character is either an
-escape or an error,
-while in RREs, it was just another way of writing the
-alphanumeric.
-This should not be a problem because there was no reason to write
-such a sequence in RREs.
-.PP
-\fB{\fR
-followed by a digit in an ARE is the beginning of a bound,
-while in RREs,
-\fB{\fR
-was always an ordinary character.
-Such sequences should be rare,
-and will often result in an error because following characters
-will not look like a valid bound.
-.PP
-In AREs,
-\fB\e\fR
-remains a special character within `\fB[\|]\fR',
-so a literal
-\fB\e\fR
-within
-\fB[\|]\fR
-must be written `\fB\e\e\fR'.
-\fB\e\e\fR
-also gives a literal
-\fB\e\fR
-within
-\fB[\|]\fR
-in RREs,
-but only truly paranoid programmers routinely doubled the backslash.
-.PP
-AREs report the longest/shortest match for the RE,
-rather than the first found in a specified search order.
-This may affect some RREs which were written in the expectation that
-the first match would be reported.
-(The careful crafting of RREs to optimize the search order for fast
-matching is obsolete (AREs examine all possible matches
-in parallel, and their performance is largely insensitive to their
-complexity) but cases where the search order was exploited to deliberately
-find a match which was \fInot\fR the longest/shortest will need rewriting.)
-.RE
-
-.SH "BASIC REGULAR EXPRESSIONS"
-BREs differ from EREs in several respects. `\fB|\fR', `\fB+\fR',
-and
-\fB?\fR
-are ordinary characters and there is no equivalent
-for their functionality.
-The delimiters for bounds are
-\fB\e{\fR
-and `\fB\e}\fR',
-with
-\fB{\fR
-and
-\fB}\fR
-by themselves ordinary characters.
-The parentheses for nested subexpressions are
-\fB\e(\fR
-and `\fB\e)\fR',
-with
-\fB(\fR
-and
-\fB)\fR
-by themselves ordinary characters.
-\fB^\fR
-is an ordinary character except at the beginning of the
-RE or the beginning of a parenthesized subexpression,
-\fB$\fR
-is an ordinary character except at the end of the
-RE or the end of a parenthesized subexpression,
-and
-\fB*\fR
-is an ordinary character if it appears at the beginning of the
-RE or the beginning of a parenthesized subexpression
-(after a possible leading `\fB^\fR').
-Finally,
-single-digit back references are available,
-and
-\fB\e<\fR
-and
-\fB\e>\fR
-are synonyms for
-\fB[[:<:]]\fR
-and
-\fB[[:>:]]\fR
-respectively;
-no other escapes are available.
+.SH "SEE ALSO"
+re_syntax(n)
-.VE 8.1
.SH KEYWORDS
match, regular expression, string