summaryrefslogtreecommitdiffstats
path: root/doc/transchan.n
diff options
context:
space:
mode:
Diffstat (limited to 'doc/transchan.n')
-rw-r--r--doc/transchan.n160
1 files changed, 160 insertions, 0 deletions
diff --git a/doc/transchan.n b/doc/transchan.n
new file mode 100644
index 0000000..9de9a87
--- /dev/null
+++ b/doc/transchan.n
@@ -0,0 +1,160 @@
+'\"
+'\" Copyright (c) 2008 Donal K. Fellows
+'\"
+'\" See the file "license.terms" for information on usage and redistribution
+'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+'\"
+.so man.macros
+.TH transchan n 8.6 Tcl "Tcl Built-In Commands"
+.BS
+'\" Note: do not modify the .SH NAME line immediately below!
+.SH NAME
+transchan \- command handler API of channel transforms
+.SH SYNOPSIS
+\fBcmdPrefix \fIoption\fR ?\fIarg arg ...\fR?
+.BE
+.SH DESCRIPTION
+.PP
+The Tcl-level handler for a channel transformation has to be a command with
+subcommands (termed an \fIensemble\fR despite not implying that it must be
+created with \fBnamespace ensemble create\fR; this mechanism is not tied to
+\fBnamespace ensemble\fR in any way). Note that \fIcmdPrefix\fR is whatever
+was specified in the call to \fBchan push\fR, and may consist of multiple
+arguments; this will be expanded to multiple words in place of the prefix.
+.PP
+Of all the possible subcommands, the handler \fImust\fR support
+\fBinitialize\fR and \fBfinalize\fR. Transformations for writable channels
+must also support \fBwrite\fR, and transformations for readable channels must
+also support \fBread\fR.
+.PP
+Note that in the descriptions below \fIcmdPrefix\fR may be more than one word,
+and \fIhandle\fR is the value returned by the \fBchan push\fR call used to
+create the transformation.
+.SS "GENERIC SUBCOMMANDS"
+.PP
+The following subcommands are relevant to all types of channel.
+.TP
+\fIcmdPrefix \fBclear \fIhandle\fR
+.
+This optional subcommand is called to signify to the transformation that any
+data stored in internal buffers (either incoming or outgoing) must be
+cleared. It is called when a \fBchan seek\fR is performed on the channel being
+transformed.
+.TP
+\fIcmdPrefix \fBfinalize \fIhandle\fR
+.
+This mandatory subcommand is called last for the given \fIhandle\fR, and then
+never again, and it exists to allow for cleaning up any Tcl-level data
+structures associated with the transformation. \fIWarning!\fR Any errors
+thrown by this subcommand will be ignored. It is not guaranteed to be called
+if the interpreter is deleted.
+.TP
+\fIcmdPrefix \fBinitialize \fIhandle mode\fR
+.
+This mandatory subcommand is called first, and then never again (for the given
+\fIhandle\fR). Its responsibility is to initialize all parts of the
+transformation at the Tcl level. The \fImode\fR is a list containing any of
+\fBread\fR and \fBwrite\fR.
+.RS
+.TP
+\fBwrite\fR
+.
+implies that the channel is writable.
+.TP
+\fBread\fR
+.
+implies that the channel is readable.
+.PP
+The return value of the subcommand should be a list containing the names of
+all subcommands supported by this handler. Any error thrown by the subcommand
+will prevent the creation of the transformation. The thrown error will appear
+as error thrown by \fBchan push\fR.
+.RE
+.SS "READ-RELATED SUBCOMMANDS"
+.PP
+These subcommands are used for handling transformations applied to readable
+channels; though strictly \fBread\fR is optional, it must be supported if any
+of the others is or the channel will be made non-readable.
+.TP
+\fIcmdPrefix \fBdrain \fIhandle\fR
+.
+This optional subcommand is called whenever data in the transformation input
+(i.e. read) buffer has to be forced upward, i.e. towards the user or script.
+The result returned by the method is taken as the \fIbinary\fR data to push
+upward to the level above this transformation (the reader or a higher-level
+transformation).
+.RS
+.PP
+In other words, when this method is called the transformation cannot defer the
+actual transformation operation anymore and has to transform all data waiting
+in its internal read buffers and return the result of that action.
+.RE
+.TP
+\fIcmdPrefix \fBlimit? \fIhandle\fR
+.
+This optional subcommand is called to allow the Tcl I/O engine to determine
+how far ahead it should read. If present, it should return an integer number
+greater than zero which indicates how many bytes ahead should be read, or an
+integer less than zero to indicate that the I/O engine may read as far ahead
+as it likes.
+.TP
+\fIcmdPrefix \fBread \fIhandle buffer\fR
+.
+This subcommand, which must be present if the transformation is to work with
+readable channels, is called whenever the base channel, or a transformation
+below this transformation, pushes data upward. The \fIbuffer\fR contains the
+binary data which has been given to us from below. It is the responsibility of
+this subcommand to actually transform the data. The result returned by the
+subcommand is taken as the binary data to push further upward to the
+transformation above this transformation. This can also be the user or script
+that originally read from the channel.
+.RS
+.PP
+Note that the result is allowed to be empty, or even less than the data we
+received; the transformation is not required to transform everything given to
+it right now. It is allowed to store incoming data in internal buffers and to
+defer the actual transformation until it has more data.
+.RE
+.SS "WRITE-RELATED SUBCOMMANDS"
+.PP
+These subcommands are used for handling transformations applied to writable
+channels; though strictly \fBwrite\fR is optional, it must be supported if any
+of the others is or the channel will be made non-writable.
+.TP
+\fIcmdPrefix \fBflush \fIhandle\fR
+.
+This optional subcommand is called whenever data in the transformation 'write'
+buffer has to be forced downward, i.e. towards the base channel. The result
+returned by the subcommand is taken as the binary data to write to the
+transformation below the current transformation. This can be the base channel
+as well.
+.RS
+.PP
+In other words, when this subcommand is called the transformation cannot defer
+the actual transformation operation anymore and has to transform all data
+waiting in its internal write buffers and return the result of that action.
+.RE
+.TP
+\fIcmdPrefix \fBwrite \fIhandle buffer\fR
+.
+This subcommand, which must be present if the transformation is to work with
+writable channels, is called whenever the user, or a transformation above this
+transformation, writes data downward. The \fIbuffer\fR contains the binary
+data which has been written to us. It is the responsibility of this subcommand
+to actually transform the data.
+.RS
+.PP
+The result returned by the subcommand is taken as the binary data to write to
+the transformation below this transformation. This can be the base channel as
+well. Note that the result is allowed to be empty, or less than the data we
+got; the transformation is not required to transform everything which was
+written to it right now. It is allowed to store this data in internal buffers
+and to defer the actual transformation until it has more data.
+.RE
+.SH "SEE ALSO"
+chan(n), refchan(n)
+.SH KEYWORDS
+API, channel, ensemble, prefix, transformation
+'\" Local Variables:
+'\" mode: nroff
+'\" End: