3 files changed, 40 insertions, 6 deletions
diff --git a/doc/DString.3 b/doc/DString.3
index e8cc5e1..e03f1f0 100644
--- a/doc/DString.3
+++ b/doc/DString.3
@@ -5,7 +5,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: DString.3,v 1.2 1998/09/14 18:39:48 stanton Exp $
+'\" RCS: @(#) $Id: DString.3,v 1.3 1999/04/16 22:53:43 hershey Exp $
 '\" 
 .so man.macros
 .TH Tcl_DString 3 7.4 Tcl "Tcl Library Procedures"
@@ -36,6 +36,8 @@ char *
 .sp
 \fBTcl_DStringSetLength\fR(\fIdsPtr, newLength\fR)
 .sp
+\fBTcl_DStringTrunc\fR(\fIdsPtr, newLength\fR)
+.sp
 \fBTcl_DStringFree\fR(\fIdsPtr\fR)
 .sp
 \fBTcl_DStringResult\fR(\fIinterp, dsPtr\fR)
@@ -124,6 +126,10 @@ caller to fill in the new space.
 even if the string is truncated to zero length, so \fBTcl_DStringFree\fR
 will still need to be called.
 .PP
+\fBTcl_DStringTrunc\fR changes the length of a dynamic string.
+This procedure is now deprecated.  \fBTcl_DStringSetLength\fR  should
+be used instead.
+.PP
 \fBTcl_DStringFree\fR should be called when you're finished using
 the string.  It frees up any memory that was allocated for the string
 and reinitializes the string's value to an empty string.
diff --git a/doc/Notifier.3 b/doc/Notifier.3
index dcd8250..c92b3cb 100644
--- a/doc/Notifier.3
+++ b/doc/Notifier.3
@@ -4,7 +4,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: Notifier.3,v 1.2 1998/09/14 18:39:49 stanton Exp $
+'\" RCS: @(#) $Id: Notifier.3,v 1.3 1999/04/16 22:53:43 hershey Exp $
 '\" 
 .so man.macros
 .TH Notifier 3 8.0 Tcl "Tcl Library Procedures"
@@ -24,6 +24,8 @@ Tcl_CreateEventSource, Tcl_DeleteEventSource, Tcl_SetMaxBlockTime, Tcl_QueueEven
 \fBTcl_SetMaxBlockTime\fR(\fItimePtr\fB)\fR
 .sp
 \fBTcl_QueueEvent\fR(\fIevPtr, position\fR)
+.sp
+\fBTcl_ThreadQueueEvent\fR(\fIthreadId, evPtr, position\fR)
 .VS
 .sp
 \fBTcl_DeleteEvents\fR(\fIdeleteProc, clientData\fR)
@@ -31,6 +33,15 @@ Tcl_CreateEventSource, Tcl_DeleteEventSource, Tcl_SetMaxBlockTime, Tcl_QueueEven
 int
 \fBTcl_WaitForEvent\fR(\fItimePtr\fR)
 .sp
+ClientData
+\fBTcl_InitNotifier\fR()
+.sp
+\fBTcl_FinalizeNotifier\fR(\fIclientData\fR)
+.sp
+\fBTcl_AlertNotifier\fR(\fIclientData\fR)
+.sp
+\fBTcl_ThreadAlert\fR(\fIthreadId\fR)
+.sp
 \fBTcl_SetTimer\fR(\fItimePtr\fR)
 .sp
 int
@@ -119,7 +130,9 @@ servicing at a future time.
 \fBTcl_QueueEvent\fR is used (primarily
 by event sources) to add events to the event queue and 
 \fBTcl_DeleteEvents\fR is used to remove events from the queue without
-processing them.
+processing them.  See the manual entry for \fBThread\fR for a 
+description of the \fBTcl_ThreadQueueEvent\fR procedure.
+
 .IP [3]
 The event loop: in order to detect and process events, the application
 enters a loop that waits for events to occur, places them on the event
@@ -406,7 +419,8 @@ entry, plus \fBTcl_DoOneEvent\fR and \fBTcl_Sleep\fR, which are
 available on all platforms, and \fBTcl_CreateFileHandler\fR and
 \fBTcl_DeleteFileHandler\fR, which are Unix-specific.  Most of these
 procedures are generic, in that they are the same for all notifiers.
-However, five of the procedures are notifier-dependent:
+However, eight of the procedures are notifier-dependent:
+\fBTcl_InitNotifier\fR, \fBTcl_AlertNotifier\fR, \fBTcl_FinalizeNotifier\fR, 
 \fBTcl_SetTimer\fR, \fBTcl_Sleep\fR, \fBTcl_WaitForEvent\fR,
 \fBTcl_CreateFileHandler\fR and \fBTcl_DeleteFileHandler\fR.  To
 support a new platform or to integrate Tcl with an
diff --git a/doc/Thread.3 b/doc/Thread.3
index 595fac3..733bb52 100644
--- a/doc/Thread.3
+++ b/doc/Thread.3
@@ -4,7 +4,7 @@
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\" 
-'\" RCS: @(#) $Id: Thread.3,v 1.2 1999/04/16 00:46:33 stanton Exp $
+'\" RCS: @(#) $Id: Thread.3,v 1.3 1999/04/16 22:53:43 hershey Exp $
 '\" 
 .so man.macros
 .TH Tcl_ConditionNotify 3 "8.1" Tcl "Tcl Library Procedures"
@@ -21,6 +21,9 @@ void
 void
 \fBTcl_ConditionWait\fR(\fIcondPtr, mutexPtr, timePtr\fR)
 .sp
+Tcl_ThreadId
+\fBTcl_GetCurrentThread\fR()
+.sp
 VOID *
 \fBTcl_GetThreadData\fR(\fIkeyPtr, size\fR)
 .sp
@@ -29,6 +32,10 @@ void
 .sp
 void
 \fBTcl_MutexUnlock\fR(\fImutexPtr\fR)
+.sp
+\fBTcl_ThreadAlert\fR(\fIthreadId\fR)
+.sp
+\fBTcl_ThreadQueueEvent\fR(\fIthreadId, evPtr, position\fR)
 .SH ARGUMENTS
 .AS Tcl_ThreadDataKey *keyPtr
 .AP Tcl_Condition *condPtr in
@@ -77,11 +84,18 @@ The caller of \fBTcl_ConditionWait\fR should be prepared for spurious
 notifications by calling \fBTcl_ConditionWait\fR within a while loop
 that tests some invariant.
 .PP
+The \fBTcl_GetCurrentThread\fR call returns the thread Id of the
+thread in which the call is made.  The thread Id can be used in calls
+to \fBTcl_ThreadQueueEvent\fR and \fBTcl_ThreadAlert\fR.  These
+procedures are essentially mutex-protected vesions of
+\fBTcl_AlertNotifier\fR and \fBTcl_QueueEvent\fR, respectively.  See
+the manual entry for \fBNotifier\fR for more details.
+.PP
 The \fBTcl_GetThreadData\fR call returns a pointer to a block of
 thread-private data.  Its argument is a key that is shared by all threads
 and a size for the block of storage.  The storage is automatically 
 allocated and initialized to all zeros the first time each thread asks for it.
-The storage is automatically deallocated by \fBTcl_FinalizeThread\fR
+The storage is automatically deallocated by \fBTcl_FinalizeThread\fR.
 .SH INITIALIZATION
 .PP
 .PP