diff options
Diffstat (limited to 'doc')
100 files changed, 418 insertions, 336 deletions
diff --git a/doc/AddErrInfo.3 b/doc/AddErrInfo.3 index caba125..0b59349 100644 --- a/doc/AddErrInfo.3 +++ b/doc/AddErrInfo.3 @@ -119,7 +119,7 @@ retrieve the stack trace when script evaluation returns \fBTCL_ERROR\fR, like so: .PP .CS -int code = Tcl_Eval(interp, script); +int code = Tcl_EvalEx(interp, script, -1, 0); if (code == TCL_ERROR) { Tcl_Obj *options = \fBTcl_GetReturnOptions\fR(interp, code); Tcl_Obj *key = Tcl_NewStringObj("-errorinfo", -1); diff --git a/doc/CallDel.3 b/doc/CallDel.3 index 766621a..33b8afc 100644 --- a/doc/CallDel.3 +++ b/doc/CallDel.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_CallWhenDeleted 3 7.0 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/CmdCmplt.3 b/doc/CmdCmplt.3 index 25b372e..bb7532c 100644 --- a/doc/CmdCmplt.3 +++ b/doc/CmdCmplt.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_CommandComplete 3 "" Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/Concat.3 b/doc/Concat.3 index 58a0fb6..e853fc3 100644 --- a/doc/Concat.3 +++ b/doc/Concat.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_Concat 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/CrtFileHdlr.3 b/doc/CrtFileHdlr.3 index c1bc1fa..f1b8df7 100644 --- a/doc/CrtFileHdlr.3 +++ b/doc/CrtFileHdlr.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_CreateFileHandler 3 8.0 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/CrtInterp.3 b/doc/CrtInterp.3 index 679795e..1d49158 100644 --- a/doc/CrtInterp.3 +++ b/doc/CrtInterp.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_CreateInterp 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/CrtTimerHdlr.3 b/doc/CrtTimerHdlr.3 index f3957c7..c229a23 100644 --- a/doc/CrtTimerHdlr.3 +++ b/doc/CrtTimerHdlr.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_CreateTimerHandler 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/DetachPids.3 b/doc/DetachPids.3 index 39a51d3..26075c3 100644 --- a/doc/DetachPids.3 +++ b/doc/DetachPids.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_DetachPids 3 "" Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/DictObj.3 b/doc/DictObj.3 index 90ca9e3..2c111c4 100644 --- a/doc/DictObj.3 +++ b/doc/DictObj.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_DictObj 3 8.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/DoWhenIdle.3 b/doc/DoWhenIdle.3 index 3e28b4d..cfdbff9 100644 --- a/doc/DoWhenIdle.3 +++ b/doc/DoWhenIdle.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_DoWhenIdle 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/Environment.3 b/doc/Environment.3 index 85880b4..7a5e396 100644 --- a/doc/Environment.3 +++ b/doc/Environment.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_PutEnv 3 "7.5" Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/ExprLongObj.3 b/doc/ExprLongObj.3 index 35edb5f..837e0a8 100644 --- a/doc/ExprLongObj.3 +++ b/doc/ExprLongObj.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_ExprLongObj 3 8.0 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/FindExec.3 b/doc/FindExec.3 index b01315c..1fd57db 100644 --- a/doc/FindExec.3 +++ b/doc/FindExec.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_FindExecutable 3 8.1 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/GetCwd.3 b/doc/GetCwd.3 index 58abcde..f4f37a1 100644 --- a/doc/GetCwd.3 +++ b/doc/GetCwd.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_GetCwd 3 8.1 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/GetIndex.3 b/doc/GetIndex.3 index fc6f40b..17a31d4 100644 --- a/doc/GetIndex.3 +++ b/doc/GetIndex.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_GetIndexFromObj 3 8.1 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/GetInt.3 b/doc/GetInt.3 index 5a3304a..eba549d 100644 --- a/doc/GetInt.3 +++ b/doc/GetInt.3 @@ -57,6 +57,9 @@ after the optional white space and sign are .QW \fB0x\fR then \fIsrc\fR is expected to be in hexadecimal form; otherwise, if the first such characters are +.QW \fB0d\fR +then \fIsrc\fR is expected to be in decimal form; otherwise, +if the first such characters are .QW \fB0o\fR then \fIsrc\fR is expected to be in octal form; otherwise, if the first such characters are @@ -65,8 +68,8 @@ then \fIsrc\fR is expected to be in binary form; otherwise, if the first such character is .QW \fB0\fR then \fIsrc\fR -is expected to be in octal form; otherwise, \fIsrc\fR is -expected to be in decimal form. +is expected to be in octal form; otherwise, \fIsrc\fR +is expected to be in decimal form. .PP \fBTcl_GetDouble\fR expects \fIsrc\fR to consist of a floating-point number, which is: white space; a sign; a sequence of digits; a diff --git a/doc/GetOpnFl.3 b/doc/GetOpnFl.3 index 86d1b94..a450b02 100644 --- a/doc/GetOpnFl.3 +++ b/doc/GetOpnFl.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_GetOpenFile 3 8.0 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/GetTime.3 b/doc/GetTime.3 index 6b885ee..9f96be5 100644 --- a/doc/GetTime.3 +++ b/doc/GetTime.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_GetTime 3 8.4 Tcl "Tcl Library Procedures" .so man.macros .BS @@ -281,7 +281,7 @@ The \fIhashKeyProc\fR member contains the address of a function called to calculate a hash value for the key. .PP .CS -typedef unsigned int \fBTcl_HashKeyProc\fR( +typedef TCL_HASH_TYPE \fBTcl_HashKeyProc\fR( Tcl_HashTable *\fItablePtr\fR, void *\fIkeyPtr\fR); .CE @@ -1,7 +1,7 @@ '\" '\" Copyright (c) 1998-2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" .TH Tcl_Init 3 8.0 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/InitStubs.3 b/doc/InitStubs.3 index 73c3437..4423666 100644 --- a/doc/InitStubs.3 +++ b/doc/InitStubs.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_InitStubs 3 8.1 Tcl "Tcl Library Procedures" .so man.macros .BS @@ -23,11 +23,11 @@ Tcl interpreter handle. A version string consisting of one or more decimal numbers separated by dots. .AP int exact in -Non-zero means that only the particular version specified by +1 means that only the particular version specified by \fIversion\fR is acceptable. -Zero means that versions newer than \fIversion\fR are also +0 means that versions newer than \fIversion\fR are also acceptable as long as they have the same major version number -as \fIversion\fR. +as \fIversion\fR. Other bits have no effect. .BE .SH INTRODUCTION .PP diff --git a/doc/Limit.3 b/doc/Limit.3 index 20a2e02..5939a80 100644 --- a/doc/Limit.3 +++ b/doc/Limit.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_LimitCheck 3 8.5 Tcl "Tcl Library Procedures" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Load 3 8.6 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/Namespace.3 b/doc/Namespace.3 index be89597..a037442 100644 --- a/doc/Namespace.3 +++ b/doc/Namespace.3 @@ -3,10 +3,10 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" '\" Note that some of these functions do not seem to belong, but they '\" were all introduced with the same TIP (#139) -'\" +'\" .TH Tcl_Namespace 3 8.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/OpenTcp.3 b/doc/OpenTcp.3 index 9fe2615..5b941dc 100644 --- a/doc/OpenTcp.3 +++ b/doc/OpenTcp.3 @@ -4,12 +4,12 @@ '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" -.TH Tcl_OpenTcpClient 3 8.0 Tcl "Tcl Library Procedures" +.TH Tcl_OpenTcpClient 3 8.7 Tcl "Tcl Library Procedures" .so man.macros .BS '\" Note: do not modify the .SH NAME line immediately below! .SH NAME -Tcl_OpenTcpClient, Tcl_MakeTcpClientChannel, Tcl_OpenTcpServer \- procedures to open channels using TCP sockets +Tcl_OpenTcpClient, Tcl_MakeTcpClientChannel, Tcl_OpenTcpServer, Tcl_OpenTcpServerEx \- procedures to open channels using TCP sockets .SH SYNOPSIS .nf \fB#include <tcl.h> \fR @@ -23,6 +23,9 @@ Tcl_Channel Tcl_Channel \fBTcl_OpenTcpServer\fR(\fIinterp, port, myaddr, proc, clientData\fR) .sp +Tcl_Channel +\fBTcl_OpenTcpServerEx\fR(\fIinterp, service, myaddr, flags, proc, clientData\fR) +.sp .SH ARGUMENTS .AS Tcl_TcpAcceptProc clientData .AP Tcl_Interp *interp in @@ -30,6 +33,9 @@ Tcl interpreter to use for error reporting. If non-NULL and an error occurs, an error message is left in the interpreter's result. .AP int port in A port number to connect to as a client or to listen on as a server. +.AP "const char" *service in +A string specifying the port number to connect to as a client or to listen on as + a server. .AP "const char" *host in A string specifying a host name or address for the remote end of the connection. .AP int myport in @@ -41,6 +47,9 @@ for the local end of the connection. If NULL, a default interface is chosen. .AP int async in If nonzero, the client socket is connected asynchronously to the server. +.AP "unsigned int" flags in +ORed combination of \fBTCL_TCPSERVER\fR flags that specify additional +informations about the socket being created. .AP ClientData sock in Platform-specific handle for client TCP socket. .AP Tcl_TcpAcceptProc *proc in @@ -130,7 +139,7 @@ for the new channel, \fIhostName\fR points to a string containing the name of the client host making the connection, and \fIport\fR will contain the client's port number. The new channel -is opened for both input and output. +is opened for both input and output. If \fIproc\fR raises an error, the connection is closed automatically. \fIProc\fR has no return value, but if it wishes to reject the connection it can close \fIchannel\fR. @@ -158,6 +167,11 @@ register it, use \fBTcl_RegisterChannel\fR. If one of the standard channels, \fBstdin\fR, \fBstdout\fR or \fBstderr\fR was previously closed, the act of creating the new channel also assigns it as a replacement for the standard channel. +.SS TCL_OPENTCPSERVEREX +.PP +\fBTcl_OpenTcpServerEx\fR behaviour is identical to \fBTcl_OpenTcpServer\fR but +gives more flexibility to the user by providing a mean to further customize some +aspects of the socket via the \fIflags\fR parameter. .SH "PLATFORM ISSUES" .PP On Unix platforms, the socket handle is a Unix file descriptor as diff --git a/doc/ParseArgs.3 b/doc/ParseArgs.3 index df0ad33..f278ee9 100644 --- a/doc/ParseArgs.3 +++ b/doc/ParseArgs.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_ParseArgsObjv 3 8.6 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/Preserve.3 b/doc/Preserve.3 index 970bded..c8f34a2 100644 --- a/doc/Preserve.3 +++ b/doc/Preserve.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_Preserve 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/PrintDbl.3 b/doc/PrintDbl.3 index 730794f..896b6eb 100644 --- a/doc/PrintDbl.3 +++ b/doc/PrintDbl.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_PrintDouble 3 8.0 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/RecEvalObj.3 b/doc/RecEvalObj.3 index 387cc44..f9550a2 100644 --- a/doc/RecEvalObj.3 +++ b/doc/RecEvalObj.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_RecordAndEvalObj 3 8.0 Tcl "Tcl Library Procedures" .so man.macros .BS @@ -32,8 +32,6 @@ the command at global level instead of the current stack level. .PP \fBTcl_RecordAndEvalObj\fR is invoked to record a command as an event on the history list and then execute it using \fBTcl_EvalObjEx\fR -(or \fBTcl_GlobalEvalObj\fR if the \fBTCL_EVAL_GLOBAL\fR bit is set -in \fIflags\fR). It returns a completion code such as \fBTCL_OK\fR just like \fBTcl_EvalObjEx\fR, as well as a result value containing additional information (a result value or error message) diff --git a/doc/RecordEval.3 b/doc/RecordEval.3 index e1625ff..36ef6b9 100644 --- a/doc/RecordEval.3 +++ b/doc/RecordEval.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_RecordAndEval 3 7.4 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/SetErrno.3 b/doc/SetErrno.3 index 21648b1..c202e2e 100644 --- a/doc/SetErrno.3 +++ b/doc/SetErrno.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_SetErrno 3 8.3 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/SetRecLmt.3 b/doc/SetRecLmt.3 index 904d4ab..ec55794 100644 --- a/doc/SetRecLmt.3 +++ b/doc/SetRecLmt.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_SetRecursionLimit 3 7.0 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/Signal.3 b/doc/Signal.3 index 70b9d91..0a280f9 100644 --- a/doc/Signal.3 +++ b/doc/Signal.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_SignalId 3 8.3 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/Sleep.3 b/doc/Sleep.3 index 2d36697..656d72a 100644 --- a/doc/Sleep.3 +++ b/doc/Sleep.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_Sleep 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/SplitList.3 b/doc/SplitList.3 index 3439f2e..d19ca14 100644 --- a/doc/SplitList.3 +++ b/doc/SplitList.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_SplitList 3 8.0 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/SplitPath.3 b/doc/SplitPath.3 index 19cee05..c011194 100644 --- a/doc/SplitPath.3 +++ b/doc/SplitPath.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_SplitPath 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/StaticPkg.3 b/doc/StaticPkg.3 index 5700ea7..41e2d65 100644 --- a/doc/StaticPkg.3 +++ b/doc/StaticPkg.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_StaticPackage 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/StdChannels.3 b/doc/StdChannels.3 index 651ad7d..7cb75a0 100644 --- a/doc/StdChannels.3 +++ b/doc/StdChannels.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH "Standard Channels" 3 7.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/StrMatch.3 b/doc/StrMatch.3 index f9c2be3..d664067 100644 --- a/doc/StrMatch.3 +++ b/doc/StrMatch.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_StringMatch 3 8.5 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/SubstObj.3 b/doc/SubstObj.3 index f582c5a..a2b6214 100644 --- a/doc/SubstObj.3 +++ b/doc/SubstObj.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tcl_SubstObj 3 8.4 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/TCL_MEM_DEBUG.3 b/doc/TCL_MEM_DEBUG.3 index e3a6809..3a014d4 100644 --- a/doc/TCL_MEM_DEBUG.3 +++ b/doc/TCL_MEM_DEBUG.3 @@ -1,8 +1,8 @@ -'\" +'\" '\" Copyright (c) 1992-1999 Karl Lehenbauer and Mark Diekhans. '\" Copyright (c) 2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" .TH TCL_MEM_DEBUG 3 8.1 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/TclZlib.3 b/doc/TclZlib.3 index c6a6417..4a5df89 100644 --- a/doc/TclZlib.3 +++ b/doc/TclZlib.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH TclZlib 3 8.6 Tcl "Tcl Library Procedures" .so man.macros .BS diff --git a/doc/break.n b/doc/break.n index 3e4ce5f..78fd005 100644 --- a/doc/break.n +++ b/doc/break.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH break n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH case n 7.0 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH cd n "" Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/clock.n b/doc/clock.n index 889a5da..ac50e36 100644 --- a/doc/clock.n +++ b/doc/clock.n @@ -89,10 +89,9 @@ have 59 or 61 seconds. .TP \fIunit\fR One of the words, \fBseconds\fR, \fBminutes\fR, \fBhours\fR, -\fBdays\fR, \fBweeks\fR, \fBmonths\fR, or \fByears\fR, or -any unique prefix of such a word. Used in conjunction with \fIcount\fR -to identify an interval of time, for example, \fI3 seconds\fR or -\fI1 year\fR. +\fBdays\fR, \fBweekdays\fR, \fBweeks\fR, \fBmonths\fR, or \fByears\fR. +Used in conjunction with \fIcount\fR to identify an interval of time, +for example, \fI3 seconds\fR or \fI1 year\fR. .SS "OPTIONS" .TP \fB\-base\fR time @@ -175,8 +174,7 @@ given as its first argument. The remaining arguments (other than the possible \fB\-timezone\fR, \fB\-locale\fR and \fB\-gmt\fR options) are integers and keywords in alternation, where the keywords are chosen from \fBseconds\fR, \fBminutes\fR, \fBhours\fR, -\fBdays\fR, \fBweeks\fR, \fBmonths\fR, or \fByears\fR, or -any unique prefix of such a word. +\fBdays\fR, \fBweekdays\fR, \fBweeks\fR, \fBmonths\fR, or \fByears\fR. .PP Addition of seconds, minutes and hours is fairly straightforward; the given time increment (times sixty for minutes, or 3600 for hours) @@ -213,7 +211,8 @@ the given time to a calendar day and time of day in the appropriate time zone and locale. The requisite number of days (weeks are converted to days by multiplying by seven) is added to the calendar day, and the date and time are then converted back to a count of seconds from -the epoch time. +the epoch time. The \fBweekdays\fR keyword is similar to \fBdays\fR, +with the only difference that weekends - Saturdays and Sundays - are skipped. .PP Adding and subtracting a given number of days across the point that the time changes at the start or end of summer time (Daylight Saving Time) diff --git a/doc/close.n b/doc/close.n index 63da75b..5daf3e2 100644 --- a/doc/close.n +++ b/doc/close.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH close n 7.5 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/concat.n b/doc/concat.n index 23c6c91..d10f092 100644 --- a/doc/concat.n +++ b/doc/concat.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH concat n 8.3 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/continue.n b/doc/continue.n index 17d16b4..92ff3b4 100644 --- a/doc/continue.n +++ b/doc/continue.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH continue n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -33,9 +33,9 @@ as the empty string, a new name is chosen. Names, unless specified, are chosen with the same algorithm used by the \fBnew\fR method of \fBoo::class\fR. .VE TIP473 -The copied object will be of the same class as the source object, and will have -all its per-object methods copied. If it is a class, it will also have all the -class methods in the class copied, but it will not have any of its instances +The copied object will be of the same class as the source object, and will have +all its per-object methods copied. If it is a class, it will also have all the +class methods in the class copied, but it will not have any of its instances copied. .PP .VS diff --git a/doc/coroutine.n b/doc/coroutine.n index c99f8d3..52775ef 100644 --- a/doc/coroutine.n +++ b/doc/coroutine.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH coroutine n 8.6 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/define.n b/doc/define.n index 7599ec0..1692c94 100644 --- a/doc/define.n +++ b/doc/define.n @@ -142,6 +142,8 @@ be afterwards. \fBself\fI subcommand arg ...\fR .TP \fBself\fI script\fR +.TP +\fBself\fR . This command is equivalent to calling \fBoo::objdefine\fR on the class being defined (see \fBCONFIGURING OBJECTS\fR below for a description of the @@ -151,6 +153,13 @@ and .QW "\fBoo::define \fIcls \fBself \fIsubcommand ...\fR" operates identically to .QW "\fBoo::objdefine \fIcls subcommand ...\fR" . +.RS +.PP +.VS TIP470 +If no arguments at all are used, this gives the name of the class currently +being configured. +.VE TIP470 +.RE .TP \fBsuperclass\fR ?\fI\-slotOperation\fR? ?\fIclassName ...\fR? .VS @@ -265,6 +274,12 @@ not previously refer to a method in that object. Does not affect the classes that the object is an instance of. Does not change the export status of the method; if it was exported before, it will be afterwards. .TP +\fBself \fR +. +.VS TIP470 +This gives the name of the object currently being configured. +.VE TIP470 +.TP \fBunexport\fI name \fR?\fIname ...\fR? . This arranges for each of the named methods, \fIname\fR, to be not exported @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH eof n 7.5 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH eval n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH exit n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -17,14 +17,14 @@ expr \- Evaluate an expression .BE .SH DESCRIPTION .PP -Concatenates \fIarg\fRs (adding separator spaces between them), -evaluates the result as a Tcl expression, and returns the value. -The operators permitted in Tcl expressions include a subset of +Concatenates \fIarg\fRs, separated by a space, into an expression, and evaluates +that expression, returning its value. +The operators permitted in an expression include a subset of the operators permitted in C expressions. For those operators common to both Tcl and C, Tcl applies the same meaning and precedence as the corresponding C operators. -Expressions almost always yield numeric results -(integer or floating-point values). +The value of an expression is often a numeric result, either an integer or a +floating-point value, but may also be a non-numeric value. For example, the expression .PP .CS @@ -32,78 +32,69 @@ For example, the expression .CE .PP evaluates to 14.2. -Tcl expressions differ from C expressions in the way that -operands are specified. Also, Tcl expressions support -non-numeric operands and string comparisons, as well as some +Expressions differ from C expressions in the way that +operands are specified. Expressions also support +non-numeric operands, string comparisons, and some additional operators not found in C. +.PP +When an expression evaluates to an integer, the value is the decimal form of +the integer, and when an expression evaluates to a floating-point number, the +value is the form produced by the \fB%g\fR format specifier of Tcl's +\fBformat\fR command. .SS OPERANDS .PP -A Tcl expression consists of a combination of operands, operators, -parentheses and commas. -White space may be used between the operands and operators and -parentheses (or commas); it is ignored by the expression's instructions. -Where possible, operands are interpreted as integer values. -Integer values may be specified in decimal (the normal case), in binary -(if the first two characters of the operand are \fB0b\fR), in octal -(if the first two characters of the operand are \fB0o\fR), or in hexadecimal -(if the first two characters of the operand are \fB0x\fR). For -compatibility with older Tcl releases, an octal integer value is also -indicated simply when the first character of the operand is \fB0\fR, -whether or not the second character is also \fBo\fR. -If an operand does not have one of the integer formats given -above, then it is treated as a floating-point number if that is -possible. Floating-point numbers may be specified in any of several -common formats making use of the decimal digits, the decimal point \fB.\fR, -the characters \fBe\fR or \fBE\fR indicating scientific notation, and -the sign characters \fB+\fR or \fB\-\fR. For example, all of the -following are valid floating-point numbers: 2.1, 3., 6e4, 7.91e+16. -Also recognized as floating point values are the strings \fBInf\fR -and \fBNaN\fR making use of any case for each character. -If no numeric interpretation is possible (note that all literal -operands that are not numeric or boolean must be quoted with either -braces or with double quotes), then an operand is left as a string -(and only a limited set of operators may be applied to it). -.PP -Operands may be specified in any of the following ways: +An expression consists of a combination of operands, operators, parentheses and +commas, possibly with whitespace between any of these elements, which is +ignored. +An integer operand may be specified in decimal (the normal case, the optional +first two characters are \fB0d\fR), binary +(the first two characters are \fB0b\fR), octal +(the first two characters are \fB0o\fR), or hexadecimal +(the first two characters are \fB0x\fR) form. For +compatibility with older Tcl releases, an operand that begins with \fB0\fR is +interpreted as an octal integer even if the second character is not \fBo\fR. +A floating-point number may be specified in any of several +common decimal formats, and may use the decimal point \fB.\fR, +\fBe\fR or \fBE\fR for scientific notation, and +the sign characters \fB+\fR and \fB\-\fR. The +following are all valid floating-point numbers: 2.1, 3., 6e4, 7.91e+16. +The strings \fBInf\fR +and \fBNaN\fR, in any combination of case, are also recognized as floating point +values. An operand that doesn't have a numeric interpretation must be quoted +with either braces or with double quotes. +.PP +An operand may be specified in any of the following ways: .IP [1] As a numeric value, either integer or floating-point. .IP [2] As a boolean value, using any form understood by \fBstring is\fR \fBboolean\fR. .IP [3] -As a Tcl variable, using standard \fB$\fR notation. -The variable's value will be used as the operand. +As a variable, using standard \fB$\fR notation. +The value of the variable is then the value of the operand. .IP [4] As a string enclosed in double-quotes. -The expression parser will perform backslash, variable, and -command substitutions on the information between the quotes, -and use the resulting value as the operand +Backslash, variable, and command substitution are performed as described in +\fBTcl\fR. .IP [5] As a string enclosed in braces. -The characters between the open brace and matching close brace -will be used as the operand without any substitutions. +The operand is treated as a braced value as described in \fBTcl\fR. .IP [6] As a Tcl command enclosed in brackets. -The command will be executed and its result will be used as -the operand. +Command substitution is performed as described in \fBTcl\fR. .IP [7] -As a mathematical function whose arguments have any of the above -forms for operands, such as \fBsin($x)\fR. See \fBMATH FUNCTIONS\fR below for +As a mathematical function such as \fBsin($x)\fR, whose arguments have any of the above +forms for operands. See \fBMATH FUNCTIONS\fR below for a discussion of how mathematical functions are handled. .PP -Where the above substitutions occur (e.g. inside quoted strings), they -are performed by the expression's instructions. -However, the command parser may already have performed one round of -substitution before the expression processor was called. -As discussed below, it is usually best to enclose expressions -in braces to prevent the command parser from performing substitutions -on the contents. +Because \fBexpr\fR parses and performs substitutions on values that have +already been parsed and substituted by \fBTcl\fR, it is usually best to enclose +expressions in braces to avoid the first round of substitutions by +\fBTcl\fR. .PP -For some examples of simple expressions, suppose the variable -\fBa\fR has the value 3 and -the variable \fBb\fR has the value 6. -Then the command on the left side of each of the lines below -will produce the value on the right side of the line: +Below are some examples of simple expressions where the value of \fBa\fR is 3 +and the value of \fBb\fR is 6. The command on the left side of each line +produces the value on the right side. .PP .CS .ta 6c @@ -114,34 +105,41 @@ will produce the value on the right side of the line: .CE .SS OPERATORS .PP -The valid operators (most of which are also available as commands in -the \fBtcl::mathop\fR namespace; see the \fBmathop\fR(n) manual page -for details) are listed below, grouped in decreasing order of precedence: +For operators having both a numeric mode and a string mode, the numeric mode is +chosen when all operands have a numeric interpretation. The integer +interpretation of an operand is preferred over the floating-point +interpretation. To ensure string operations on arbitrary values it is generally a +good idea to use \fBeq\fR, \fBne\fR, or the \fBstring\fR command instead of +more versatile operators such as \fB==\fR. +.PP +Unless otherwise specified, operators accept non-numeric operands. The value +of a boolean operation is 1 if true, 0 otherwise. See also \fBstring is\fR +\fBboolean\fR. The valid operators, most of which are also available as +commands in the \fBtcl::mathop\fR namespace (see \fBmathop\fR(n)), are listed +below, grouped in decreasing order of precedence: .TP 20 \fB\-\0\0+\0\0~\0\0!\fR . -Unary minus, unary plus, bit-wise NOT, logical NOT. None of these operators -may be applied to string operands, and bit-wise NOT may be -applied only to integers. +Unary minus, unary plus, bit-wise NOT, logical NOT. These operators +may only be applied to numeric operands, and bit-wise NOT may only be +applied to integers. .TP 20 \fB**\fR . -Exponentiation. Valid for any numeric operands. +Exponentiation. Valid for numeric operands. .TP 20 \fB*\0\0/\0\0%\fR . -Multiply, divide, remainder. None of these operators may be -applied to string operands, and remainder may be applied only -to integers. -The remainder will always have the same sign as the divisor and -an absolute value smaller than the absolute value of the divisor. +Multiply and divide, which are valid for numeric operands, and remainder, which +is valid for integers. The remainder, an absolute value smaller than the +absolute value of the divisor, has the same sign as the divisor. .RS .PP -When applied to integers, the division and remainder operators can be -considered to partition the number line into a sequence of equal-sized -adjacent non-overlapping pieces where each piece is the size of the divisor; -the division result identifies which piece the divisor lay within, and the -remainder result identifies where within that piece the divisor lay. A +When applied to integers, division and remainder can be +considered to partition the number line into a sequence of +adjacent non-overlapping pieces, where each piece is the size of the divisor; +the quotient identifies which piece the dividend lies within, and the +remainder identifies where within that piece the dividend lies. A consequence of this is that the result of .QW "-57 \fB/\fR 10" is always -6, and the result of @@ -151,177 +149,157 @@ is always 3. .TP 20 \fB+\0\0\-\fR . -Add and subtract. Valid for any numeric operands. +Add and subtract. Valid for numeric operands. .TP 20 \fB<<\0\0>>\fR . -Left and right shift. Valid for integer operands only. +Left and right shift. Valid for integers. A right shift always propagates the sign bit. .TP 20 \fB<\0\0>\0\0<=\0\0>=\fR . -Boolean less, greater, less than or equal, and greater than or equal. -Each operator produces 1 if the condition is true, 0 otherwise. -These operators may be applied to strings as well as numeric operands, -in which case string comparison is used. +Boolean less than, greater than, less than or equal, and greater than or equal. .TP 20 \fB==\0\0!=\fR . -Boolean equal and not equal. Each operator produces a zero/one result. -Valid for all operand types. +Boolean equal and not equal. .TP 20 \fBeq\0\0ne\fR . -Boolean string equal and string not equal. Each operator produces a -zero/one result. The operand types are interpreted only as strings. +Boolean string equal and string not equal. .TP 20 \fBin\0\0ni\fR . -List containment and negated list containment. Each operator produces -a zero/one result and treats its first argument as a string and its -second argument as a Tcl list. The \fBin\fR operator indicates -whether the first argument is a member of the second argument list; -the \fBni\fR operator inverts the sense of the result. +List containment and negated list containment. The first argument is +interpreted as a string, the second as a list. \fBin\fR tests for membership +in the list, and \fBni\fR is the inverse. .TP 20 \fB&\fR . -Bit-wise AND. Valid for integer operands only. +Bit-wise AND. Valid for integer operands. .TP 20 \fB^\fR . -Bit-wise exclusive OR. Valid for integer operands only. +Bit-wise exclusive OR. Valid for integer operands. .TP 20 \fB|\fR . -Bit-wise OR. Valid for integer operands only. +Bit-wise OR. Valid for integer operands. .TP 20 \fB&&\fR . -Logical AND. Produces a 1 result if both operands are non-zero, -0 otherwise. -Valid for boolean and numeric (integers or floating-point) operands only. +Logical AND. If both operands are true, the result is 1, or 0 otherwise. + .TP 20 \fB||\fR . -Logical OR. Produces a 0 result if both operands are zero, 1 otherwise. -Valid for boolean and numeric (integers or floating-point) operands only. +Logical OR. If both operands are false, the result is 0, or 1 otherwise. .TP 20 \fIx\fB?\fIy\fB:\fIz\fR . -If-then-else, as in C. If \fIx\fR -evaluates to non-zero, then the result is the value of \fIy\fR. -Otherwise the result is the value of \fIz\fR. -The \fIx\fR operand must have a boolean or numeric value. -.PP -See the C manual for more details on the results -produced by each operator. -The exponentiation operator promotes types like the multiply and -divide operators, and produces a result that is the same as the output -of the \fBpow\fR function (after any type conversions.) -All of the binary operators but exponentiation group left-to-right -within the same precedence level; exponentiation groups right-to-left. For example, the command +If-then-else, as in C. If \fIx\fR is false , the result is the value of +\fIy\fR. Otherwise the result is the value of \fIz\fR. +.PP +The exponentiation operator promotes types in the same way that the multiply +and divide operators do, and the result is is the same as the result of +\fBpow\fR. +Exponentiation groups right-to-left within a precedence level. Other binary +operators group left-to-right. For example, the value of .PP .CS \fBexpr\fR {4*2 < 7} .CE .PP -returns 0, while +is 0, while the value of .PP .CS \fBexpr\fR {2**3**2} .CE .PP -returns 512. +is 512. .PP -The \fB&&\fR, \fB||\fR, and \fB?:\fR operators have +As in C, \fB&&\fR, \fB||\fR, and \fB?:\fR feature .QW "lazy evaluation" , -just as in C, which means that operands are not evaluated if they are -not needed to determine the outcome. For example, in the command +which means that operands are not evaluated if they are +not needed to determine the outcome. For example, in .PP .CS \fBexpr\fR {$v ? [a] : [b]} .CE .PP -only one of -.QW \fB[a]\fR -or -.QW \fB[b]\fR -will actually be evaluated, -depending on the value of \fB$v\fR. Note, however, that this is -only true if the entire expression is enclosed in braces; otherwise -the Tcl parser will evaluate both -.QW \fB[a]\fR -and -.QW \fB[b]\fR -before invoking the \fBexpr\fR command. +only one of \fB[a]\fR or \fB[b]\fR is evaluated, +depending on the value of \fB$v\fR. This is not true of the normal Tcl parser, +so it is normally recommended to enclose the arguments to \fBexpr\fR in braces. +Without braces, as in +\fBexpr\fR $v ? [a] : [b] +both \fB[a]\fR and \fB[b]\fR are evaluated before \fBexpr\fR is even called. +.PP +For more details on the results +produced by each operator, see the documentation for C. .SS "MATH FUNCTIONS" .PP -When the expression parser encounters a mathematical function -such as \fBsin($x)\fR, it replaces it with a call to an ordinary -Tcl function in the \fBtcl::mathfunc\fR namespace. The processing -of an expression such as: +A mathematical function such as \fBsin($x)\fR is replaced with a call to an ordinary +Tcl command in the \fBtcl::mathfunc\fR namespace. The evaluation +of an expression such as .PP .CS \fBexpr\fR {sin($x+$y)} .CE .PP -is the same in every way as the processing of: +is the same in every way as the evaluation of .PP .CS \fBexpr\fR {[tcl::mathfunc::sin [\fBexpr\fR {$x+$y}]]} .CE .PP -which in turn is the same as the processing of: +which in turn is the same as the evaluation of .PP .CS tcl::mathfunc::sin [\fBexpr\fR {$x+$y}] .CE .PP -The executor will search for \fBtcl::mathfunc::sin\fR using the usual -rules for resolving functions in namespaces. Either -\fB::tcl::mathfunc::sin\fR or \fB[namespace -current]::tcl::mathfunc::sin\fR will satisfy the request, and others -may as well (depending on the current \fBnamespace path\fR setting). +\fBtcl::mathfunc::sin\fR is resolved as described in +\fBNAMESPACE RESOLUTION\fR in the \fBnamespace\fR(n) documentation. Given the +default value of \fBnamespace path\fR, \fB[namespace +current]::tcl::mathfunc::sin\fR or \fB::tcl::mathfunc::sin\fR are the typical +resolutions. .PP -Some mathematical functions have several arguments, separated by commas like in C. Thus: +As in C, a mathematical function may accept multiple arguments separated by commas. Thus, .PP .CS \fBexpr\fR {hypot($x,$y)} .CE .PP -ends up as +becomes .PP .CS tcl::mathfunc::hypot $x $y .CE .PP -See the \fBmathfunc\fR(n) manual page for the math functions that are +See the \fBmathfunc\fR(n) documentation for the math functions that are available by default. .SS "TYPES, OVERFLOW, AND PRECISION" .PP -All internal computations involving integers are done calling on the -LibTomMath multiple precision integer library as required so that all -integer calculations are performed exactly. Note that in Tcl releases -prior to 8.5, integer calculations were performed with one of the C types +When needed to guarantee exact performance, internal computations involving +integers use the LibTomMath multiple precision integer library. In Tcl releases +prior to 8.5, integer calculations were performed using one of the C types \fIlong int\fR or \fITcl_WideInt\fR, causing implicit range truncation in those calculations where values overflowed the range of those types. -Any code that relied on these implicit truncations will need to explicitly -add \fBint()\fR or \fBwide()\fR function calls to expressions at the points -where such truncation is required to take place. +Any code that relied on these implicit truncations should instead call +\fBint()\fR or \fBwide()\fR, which do truncate. .PP -All internal computations involving floating-point are -done with the C type \fIdouble\fR. -When converting a string to floating-point, exponent overflow is +Internal floating-point computations are +performed using the \fIdouble\fR C type. +When converting a string to floating-point value, exponent overflow is detected and results in the \fIdouble\fR value of \fBInf\fR or \fB\-Inf\fR as appropriate. Floating-point overflow and underflow are detected to the degree supported by the hardware, which is generally -pretty reliable. +fairly reliable. .PP -Conversion among internal representations for integer, floating-point, -and string operands is done automatically as needed. -For arithmetic computations, integers are used until some -floating-point number is introduced, after which floating-point is used. -For example, +Conversion among internal representations for integer, floating-point, and +string operands is done automatically as needed. For arithmetic computations, +integers are used until some floating-point number is introduced, after which +floating-point values are used. For example, .PP .CS \fBexpr\fR {5 / 4} @@ -335,82 +313,62 @@ returns 1, while .CE .PP both return 1.25. -Floating-point values are always returned with a +A floating-point result can be distinguished from an integer result by the +presence of either .QW \fB.\fR -or an +or .QW \fBe\fR -so that they will not look like integer values. For example, +.PP +. For example, .PP .CS \fBexpr\fR {20.0/5.0} .CE .PP returns \fB4.0\fR, not \fB4\fR. -.SS "STRING OPERATIONS" -.PP -String values may be used as operands of the comparison operators, -although the expression evaluator tries to do comparisons as integer -or floating-point when it can, -i.e., when all arguments to the operator allow numeric interpretations, -except in the case of the \fBeq\fR and \fBne\fR operators. -If one of the operands of a comparison is a string and the other -has a numeric value, a canonical string representation of the numeric -operand value is generated to compare with the string operand. -Canonical string representation for integer values is a decimal string -format. Canonical string representation for floating-point values -is that produced by the \fB%g\fR format specifier of Tcl's -\fBformat\fR command. For example, the commands -.PP -.CS -\fBexpr\fR {"0x03" > "2"} -\fBexpr\fR {"0y" > "0x12"} -.CE -.PP -both return 1. The first comparison is done using integer -comparison, and the second is done using string comparison. -Because of Tcl's tendency to treat values as numbers whenever -possible, it is not generally a good idea to use operators like \fB==\fR -when you really want string comparison and the values of the -operands could be arbitrary; it is better in these cases to use -the \fBeq\fR or \fBne\fR operators, or the \fBstring\fR command instead. .SH "PERFORMANCE CONSIDERATIONS" .PP -Enclose expressions in braces for the best speed and the smallest -storage requirements. -This allows the Tcl bytecode compiler to generate the best code. -.PP -As mentioned above, expressions are substituted twice: -once by the Tcl parser and once by the \fBexpr\fR command. -For example, the commands +Where an expression contains syntax that Tcl would otherwise perform +substitutions on, enclosing an expression in braces or otherwise quoting it +so that it's a static value allows the Tcl compiler to generate bytecode for +the expression, resulting in better speed and smaller storage requirements. +This also avoids issues that can arise if Tcl is allowed to perform +substitution on the value before \fBexpr\fR is called. .PP +In the following example, the value of the expression is 11 because the Tcl parser first +substitutes \fB$b\fR and \fBexpr\fR then substitutes \fB$a\fR. Enclosing the +expression in braces would result in a syntax error. .CS set a 3 set b {$a + 2} \fBexpr\fR $b*4 .CE .PP -return 11, not a multiple of 4. -This is because the Tcl parser will first substitute \fB$a + 2\fR for -the variable \fBb\fR, -then the \fBexpr\fR command will evaluate the expression \fB$a + 2*4\fR. -.PP -Most expressions do not require a second round of substitutions. -Either they are enclosed in braces or, if not, -their variable and command substitutions yield numbers or strings -that do not themselves require substitutions. -However, because a few unbraced expressions -need two rounds of substitutions, -the bytecode compiler must emit -additional instructions to handle this situation. -The most expensive code is required for -unbraced expressions that contain command substitutions. -These expressions must be implemented by generating new code -each time the expression is executed. -When the expression is unbraced to allow the substitution of a function or -operator, consider using the commands documented in the \fBmathfunc\fR(n) or -\fBmathop\fR(n) manual pages directly instead. + +When an expression is generated at runtime, like the one above is, the bytcode +compiler must ensure that new code is generated each time the expression +is evaluated. This is the most costly kind of expression from a performance +perspective. In such cases, consider directly using the commands described in +the \fBmathfunc\fR(n) or \fBmathop\fR(n) documentation instead of \fBexpr\fR. + +Most expressions are not formed at runtime, but are literal strings or contain +substitutions that don't introduce other substitutions. To allow the bytecode +compiler to work with an expression as a string literal at compilation time, +ensure that it contains no substitutions or that it is enclosed in braces or +otherwise quoted to prevent Tcl from performing substitutions, allowing +\fBexpr\fR to perform them instead. .SH EXAMPLES .PP +A numeric comparison whose result is 1: +.CS +\fBexpr\fR {"0x03" > "2"} +.CE +.PP +A string comparison whose result is 1: +.CS +\fBexpr\fR {"0y" > "0x12"} +.CE +.PP Define a procedure that computes an .QW interesting mathematical function: @@ -444,8 +402,8 @@ each other: puts "a and b are [\fBexpr\fR {$a eq $b ? {equal} : {different}}]" .CE .PP -Set a variable to whether an environment variable is both defined at -all and also set to a true boolean value: +Set a variable indicating whether an environment variable is defined and has +value of true: .PP .CS set isTrue [\fBexpr\fR { diff --git a/doc/fblocked.n b/doc/fblocked.n index 2841aee..93cfe87 100644 --- a/doc/fblocked.n +++ b/doc/fblocked.n @@ -1,4 +1,4 @@ -'\" +'\" '\" Copyright (c) 1996 Sun Microsystems, Inc. '\" '\" See the file "license.terms" for information on usage and redistribution @@ -390,7 +390,7 @@ that use the third component do not attempt to perform tilde substitution. .RE .TP -\fBfile stat \fIname varName\fR +\fBfile stat \fIname varName\fR . Invokes the \fBstat\fR kernel call on \fIname\fR, and uses the variable given by \fIvarName\fR to hold information returned from the kernel call. diff --git a/doc/flush.n b/doc/flush.n index d266d91..6b98ab7 100644 --- a/doc/flush.n +++ b/doc/flush.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH flush n 7.5 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/foreach.n b/doc/foreach.n index 89a11f6..925ec1f 100644 --- a/doc/foreach.n +++ b/doc/foreach.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH foreach n "" Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/format.n b/doc/format.n index ba044f2..4eb566d 100644 --- a/doc/format.n +++ b/doc/format.n @@ -89,6 +89,8 @@ For \fBx\fR or \fBX\fR conversions, \fB0x\fR or \fB0X\fR (respectively) will be added to the beginning of the result unless it is zero. For \fBb\fR conversions, \fB0b\fR will be added to the beginning of the result unless it is zero. +For \fBd\fR conversions, \fB0d\fR will be added to the beginning +of the result unless it is zero. For all floating-point conversions (\fBe\fR, \fBE\fR, \fBf\fR, \fBg\fR, and \fBG\fR) it guarantees that the result always has a decimal point. @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH gets n 7.5 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/history.n b/doc/history.n index e1f9781..0391948 100644 --- a/doc/history.n +++ b/doc/history.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH history n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH if n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH incr n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -7,7 +7,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH info n 8.4 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -297,10 +297,11 @@ scripts are stored. This is actually the value of the \fBtcl_library\fR variable and may be changed by setting \fBtcl_library\fR. .TP -\fBinfo loaded \fR?\fIinterp\fR? +\fBinfo loaded \fR?\fIinterp\fR? ?\fIpackage\fR? . -Returns a list describing all of the packages that have been loaded into -\fIinterp\fR with the \fBload\fR command. +Returns the filename loaded as part of \fIpackage\fR. If \fIpackage\fR +is not specified, returns a list describing all of the packages +that have been loaded into \fIinterp\fR with the \fBload\fR command. Each list element is a sub-list with two elements consisting of the name of the file from which the package was loaded and the name of the package. diff --git a/doc/interp.n b/doc/interp.n index 92113a6..ac07fb7 100644 --- a/doc/interp.n +++ b/doc/interp.n @@ -5,7 +5,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH interp n 8.6 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH join n "" Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/lappend.n b/doc/lappend.n index a324ca3..80d075a 100644 --- a/doc/lappend.n +++ b/doc/lappend.n @@ -5,7 +5,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH lappend n "" Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/lassign.n b/doc/lassign.n index e250729..5620de6 100644 --- a/doc/lassign.n +++ b/doc/lassign.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH lassign n 8.5 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -5,7 +5,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH list n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH load n 7.5 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/lrepeat.n b/doc/lrepeat.n index 466339d..f92792e 100644 --- a/doc/lrepeat.n +++ b/doc/lrepeat.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH lrepeat n 8.5 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/lreverse.n b/doc/lreverse.n index 51a9e57..4c2f762 100644 --- a/doc/lreverse.n +++ b/doc/lreverse.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH lreverse n 8.5 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/namespace.n b/doc/namespace.n index 1f4e85f..b0b6e25 100644 --- a/doc/namespace.n +++ b/doc/namespace.n @@ -303,7 +303,7 @@ used for qualified namespace or variable names. Sets or returns the unknown command handler for the current namespace. The handler is invoked when a command called from within the namespace cannot be found in the current namespace, the namespace's path nor in -the global namespace. +the global namespace. The \fIscript\fR argument, if given, should be a well formed list representing a command name and optional arguments. When the handler is invoked, the full invocation line will be appended to the @@ -138,7 +138,7 @@ before chaining from subclass, args = x 1 2 3 y in the superclass, args = a x 1 2 3 y b in the superclass, args = pureSynthesis after chaining from subclass -before chaining from subclass, args = +before chaining from subclass, args = in the superclass, args = a b in the superclass, args = pureSynthesis after chaining from subclass diff --git a/doc/package.n b/doc/package.n index a6a972f..5687480 100644 --- a/doc/package.n +++ b/doc/package.n @@ -12,6 +12,7 @@ package \- Facilities for package loading and version control .SH SYNOPSIS .nf +\fBpackage files\fR \fIpackage\fR \fBpackage forget\fR ?\fIpackage package ...\fR? \fBpackage ifneeded \fIpackage version\fR ?\fIscript\fR? \fBpackage names\fR @@ -43,6 +44,13 @@ primarily by system scripts that maintain the package database. The behavior of the \fBpackage\fR command is determined by its first argument. The following forms are permitted: .TP +\fBpackage files\fR \fIpackage\fR +. +Lists all files forming part of \fIpackage\fR. Auto-loaded files are not +included in this list, only files which were directly sourced during package +initialization. The list order corresponds with the order in which the +files were sourced. +.TP \fBpackage forget\fR ?\fIpackage package ...\fR? . Removes all information about each specified package from this interpreter, @@ -283,8 +291,8 @@ error. .PP When an interpreter is created, its initial selection mode value is set to .QW stable -unless the environment variable \fBTCL_PKG_PREFER_LATEST\fR -is set. If that environment variable is defined (with any value) then +unless the environment variable \fBTCL_PKG_PREFER_LATEST\fR is set +(to any value) or the Tcl package itself is unstable. Otherwise the initial (and permanent) selection mode value is set to .QW latest . .RE diff --git a/doc/packagens.n b/doc/packagens.n index 61e7eca..5bd2e67 100644 --- a/doc/packagens.n +++ b/doc/packagens.n @@ -1,7 +1,7 @@ '\" '\" Copyright (c) 1998-2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" .TH pkg::create n 8.3 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH pid n 7.0 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/platform.n b/doc/platform.n index 6abc289..5380ff4 100644 --- a/doc/platform.n +++ b/doc/platform.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH "platform" n 1.0.4 platform "Tcl Bundled Packages" .so man.macros .BS diff --git a/doc/platform_shell.n b/doc/platform_shell.n index 64a2e46..330afa9 100644 --- a/doc/platform_shell.n +++ b/doc/platform_shell.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH "platform::shell" n 1.1.4 platform::shell "Tcl Bundled Packages" .so man.macros .BS diff --git a/doc/prefix.n b/doc/prefix.n index 344ade7..50aa2fb 100644 --- a/doc/prefix.n +++ b/doc/prefix.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH prefix n 8.6 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH puts n 7.5 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH pwd n "" Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/re_syntax.n b/doc/re_syntax.n index 7988071..8d732ed 100644 --- a/doc/re_syntax.n +++ b/doc/re_syntax.n @@ -293,12 +293,12 @@ treatment is as if the enclosing delimiters were .QW \fB[.\fR \& and .QW \fB.]\fR .) -For example, if \fBo\fR and \fB\*(qo\fR are the members of an +For example, if \fBo\fR and \fB\[^o]\fR are the members of an equivalence class, then .QW \fB[[=o=]]\fR , -.QW \fB[[=\*(qo=]]\fR , +.QW \fB[[=\[^o]=]]\fR , and -.QW \fB[o\*(qo]\fR \& +.QW \fB[o\[^o]]\fR \& are all synonymous. An equivalence class may not be an endpoint of a range. .RS .PP diff --git a/doc/refchan.n b/doc/refchan.n index 2232d50..8737556 100644 --- a/doc/refchan.n +++ b/doc/refchan.n @@ -1,4 +1,4 @@ -'\" +'\" '\" Copyright (c) 2006 Andreas Kupries <andreas_kupries@users.sourceforge.net> '\" '\" See the file "license.terms" for information on usage and redistribution diff --git a/doc/registry.n b/doc/registry.n index 001def9..ec5910c 100644 --- a/doc/registry.n +++ b/doc/registry.n @@ -152,7 +152,7 @@ nulls. .TP \fBsz\fR . -The registry value contains a null-terminated string. The data is +The registry value contains a null-terminated string. The data is represented in Tcl as a string. .TP \fBexpand_sz\fR diff --git a/doc/regsub.n b/doc/regsub.n index a5b79de..29c118a 100644 --- a/doc/regsub.n +++ b/doc/regsub.n @@ -68,6 +68,33 @@ and sequences are handled for each substitution using the information from the corresponding match. .TP +\fB\-command\fR +.VS 8.7 +Changes the handling of \fIsubSpec\fR so that it is not treated +as a template for a substitution string and the substrings +.QW & +and +.QW \e\fIn\fR +no longer have special meaning. Instead \fIsubSpec\fR must be a +command prefix, that is, a non-empty list. The substring of \fIstring\fR +that matches \fIexp\fR, and then each substring that matches each +capturing sub-RE within \fIexp\fR are appended as additional elements +to that list. (The items appended to the list are much like what +\fBregexp\fR \fB-inline\fR would return). The completed list is then +evaluated as a Tcl command, and the result of that command is the +substitution string. Any error or exception from command evaluation +becomes an error or exception from the \fBregsub\fR command. +.RS +.PP +If \fB\-all\fR is not also given, the command callback will be invoked at most +once (exactly when the regular expression matches). If \fB\-all\fR is given, +the command callback will be invoked for each matched location, in sequence. +The exact location indices that matched are not made available to the script. +.PP +See \fBEXAMPLES\fR below for illustrative cases. +.RE +.VE 8.7 +.TP \fB\-expanded\fR . Enables use of the expanded regular expression syntax where @@ -183,6 +210,53 @@ set substitution {[format \e\e\e\eu%04x [scan "\e\e&" %c]]} set quoted [subst [string map {\en {\e\eu000a}} \e [\fBregsub\fR -all $RE $string $substitution]]] .CE +.PP +.VS 8.7 +The above operation can be done using \fBregsub \-command\fR instead, which is +often faster. (A full pre-computed \fBstring map\fR would be faster still, but +the cost of computing the map for a transformation as complex as this can be +quite large.) +.PP +.CS +# This RE is just a character class for everything "bad" +set RE {[][{};#\e\e\e$\es\eu0080-\euffff]} + +# This encodes what the RE described above matches +proc encodeChar {ch} { + # newline is handled specially since backslash-newline is a + # special sequence. + if {$ch eq "\en"} { + return "\e\eu000a" + } + # No point in writing this as a one-liner + scan $ch %c charNumber + format "\e\eu%04x" $charNumber +} + +set quoted [\fBregsub\fR -all -command $RE $string encodeChar] +.CE +.PP +Decoding a URL-encoded string using \fBregsub \-command\fR, a lambda term and +the \fBapply\fR command. +.PP +.CS +# Match one of the sequences in a URL-encoded string that needs +# fixing, converting + to space and %XX to the right character +# (e.g., %7e becomes ~) +set RE {(\e+)|%([0-9A-Fa-f]{2})} + +# Note that -command uses a command prefix, not a command name +set decoded [\fBregsub\fR -all -command $RE $string {apply {{- p h} { + # + is a special case; handle directly + if {$p eq "+"} { + return " " + } + # convert hex to a char + scan $h %x charNumber + format %c $charNumber +}}}] +.CE +.VE 8.7 .SH "SEE ALSO" regexp(n), re_syntax(n), subst(n), string(n) .SH KEYWORDS diff --git a/doc/rename.n b/doc/rename.n index 744bf5a..f74db5f 100644 --- a/doc/rename.n +++ b/doc/rename.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH rename n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH seek n 8.1 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/socket.n b/doc/socket.n index 3efdb37..823dbd5 100644 --- a/doc/socket.n +++ b/doc/socket.n @@ -131,6 +131,16 @@ wildcard address so that it can accept connections from any interface. If \fIaddr\fR is a domain name that resolves to multiple IP addresses that are available on the local machine, the socket will listen on all of them. +.TP +\fB\-reuseaddr\fI boolean\fR +. +Tells the kernel whether to reuse the local address if there is no socket +actively listening on it. This is the default on Windows. +.TP +\fB\-reuseport\fI boolean\fR +. +Tells the kernel whether to allow the binding of multiple sockets to the same +address and port. .PP Server channels cannot be used for input or output; their sole use is to accept new client connections. The channels created for each incoming diff --git a/doc/source.n b/doc/source.n index 67d4b6b..82fefa6 100644 --- a/doc/source.n +++ b/doc/source.n @@ -5,7 +5,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH source n "" Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/split.n b/doc/split.n index f1c66d0..e977d7c 100644 --- a/doc/split.n +++ b/doc/split.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH split n "" Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/switch.n b/doc/switch.n index 6e27f56..70eeb09 100644 --- a/doc/switch.n +++ b/doc/switch.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH switch n 8.5 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/tailcall.n b/doc/tailcall.n index 926c608..24eb902 100644 --- a/doc/tailcall.n +++ b/doc/tailcall.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tailcall n 8.6 Tcl "Tcl Built-In Commands" .so man.macros .BS diff --git a/doc/tclsh.1 b/doc/tclsh.1 index 6ed5eb6..0e59b4f 100644 --- a/doc/tclsh.1 +++ b/doc/tclsh.1 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tclsh 1 "" Tcl "Tcl Applications" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tell n 8.1 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -16,7 +16,7 @@ tell \- Return current access position for an open channel .BE .SH DESCRIPTION .PP -Returns an integer string giving the current access position in +Returns an integer giving the current access position in \fIchannelId\fR. This value returned is a byte offset that can be passed to \fBseek\fR in order to set the channel to a particular position. Note that this value is in terms of bytes, not characters like \fBread\fR. diff --git a/doc/throw.n b/doc/throw.n index 0d1df78..0d096f4 100644 --- a/doc/throw.n +++ b/doc/throw.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH throw n 8.6 Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH time n "" Tcl "Tcl Built-In Commands" .so man.macros .BS @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tm n 8.5 Tcl "Tcl Built-In Commands" .so man.macros .BS |