diff options
Diffstat (limited to 'generic/tcl.h')
| -rw-r--r-- | generic/tcl.h | 2343 |
1 files changed, 1192 insertions, 1151 deletions
diff --git a/generic/tcl.h b/generic/tcl.h index e794032..33fcb6f 100644 --- a/generic/tcl.h +++ b/generic/tcl.h @@ -1,8 +1,8 @@ /* * tcl.h -- * - * This header file describes the externally-visible facilities - * of the Tcl interpreter. + * This header file describes the externally-visible facilities of the + * Tcl interpreter. * * Copyright (c) 1987-1994 The Regents of the University of California. * Copyright (c) 1993-1996 Lucent Technologies. @@ -10,8 +10,8 @@ * Copyright (c) 1998-2000 by Scriptics Corporation. * Copyright (c) 2002 by Kevin B. Kenny. All rights reserved. * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #ifndef _TCL @@ -34,37 +34,38 @@ extern "C" { #define TCL_FINAL_RELEASE 2 /* - * When version numbers change here, must also go into the following files - * and update the version numbers: + * When version numbers change here, must also go into the following files and + * update the version numbers: * - * library/init.tcl (only if Major.minor changes, not patchlevel) 1 LOC + * library/init.tcl (1 LOC patch) * unix/configure.in (2 LOC Major, 2 LOC minor, 1 LOC patch) * win/configure.in (as above) * win/tcl.m4 (not patchlevel) - * win/makefile.vc (not patchlevel) 2 LOC - * README (sections 0 and 2) - * mac/README (2 LOC, not patchlevel) + * win/makefile.bc (not patchlevel) 2 LOC + * README (sections 0 and 2, with and without separator) * macosx/Tcl.pbproj/project.pbxproj (not patchlevel) 1 LOC * macosx/Tcl.pbproj/default.pbxuser (not patchlevel) 1 LOC - * win/README.binary (sections 0-4) + * macosx/Tcl.xcode/project.pbxproj (not patchlevel) 2 LOC + * macosx/Tcl.xcode/default.pbxuser (not patchlevel) 1 LOC + * macosx/Tcl-Common.xcconfig (not patchlevel) 1 LOC * win/README (not patchlevel) (sections 0 and 2) - * unix/tcl.spec (2 LOC Major/Minor, 1 LOC patch) - * tests/basic.test (1 LOC M/M, not patchlevel) + * unix/tcl.spec (1 LOC patch) * tools/tcl.hpj.in (not patchlevel, for windows installer) * tools/tcl.wse.in (for windows installer) * tools/tclSplash.bmp (not patchlevel) */ + #define TCL_MAJOR_VERSION 8 -#define TCL_MINOR_VERSION 4 +#define TCL_MINOR_VERSION 5 #define TCL_RELEASE_LEVEL TCL_FINAL_RELEASE -#define TCL_RELEASE_SERIAL 19 +#define TCL_RELEASE_SERIAL 11 -#define TCL_VERSION "8.4" -#define TCL_PATCH_LEVEL "8.4.19" +#define TCL_VERSION "8.5" +#define TCL_PATCH_LEVEL "8.5.11" /* - * The following definitions set up the proper options for Windows - * compilers. We use this method because there is no autoconf equivalent. + * The following definitions set up the proper options for Windows compilers. + * We use this method because there is no autoconf equivalent. */ #ifndef __WIN32__ @@ -90,26 +91,10 @@ extern "C" { #endif /* __WIN32__ */ /* - * The following definitions set up the proper options for Macintosh - * compilers. We use this method because there is no autoconf equivalent. - */ - -#ifdef MAC_TCL -#include <ConditionalMacros.h> -# ifndef USE_TCLALLOC -# define USE_TCLALLOC 1 -# endif -# ifndef NO_STRERROR -# define NO_STRERROR 1 -# endif -# define INLINE -#endif - - -/* * Utility macros: STRINGIFY takes an argument and wraps it in "" (double * quotation marks), JOIN joins two arguments. */ + #ifndef STRINGIFY # define STRINGIFY(x) STRINGIFY1(x) # define STRINGIFY1(x) #x @@ -119,21 +104,20 @@ extern "C" { # define JOIN1(a,b) a##b #endif -/* - * A special definition used to allow this header file to be included - * from windows or mac resource files so that they can obtain version - * information. RC_INVOKED is defined by default by the windows RC tool - * and manually set for macintosh. +/* + * A special definition used to allow this header file to be included from + * windows resource files so that they can obtain version information. + * RC_INVOKED is defined by default by the windows RC tool. * - * Resource compilers don't like all the C stuff, like typedefs and - * procedure declarations, that occur below, so block them out. + * Resource compilers don't like all the C stuff, like typedefs and function + * declarations, that occur below, so block them out. */ #ifndef RC_INVOKED /* - * Special macro to define mutexes, that doesn't do anything - * if we are not using threads. + * Special macro to define mutexes, that doesn't do anything if we are not + * using threads. */ #ifdef TCL_THREADS @@ -143,62 +127,61 @@ extern "C" { #endif /* - * Macros that eliminate the overhead of the thread synchronization - * functions when compiling without thread support. + * Tcl's public routine Tcl_FSSeek() uses the values SEEK_SET, SEEK_CUR, and + * SEEK_END, all #define'd by stdio.h . + * + * Also, many extensions need stdio.h, and they've grown accustomed to tcl.h + * providing it for them rather than #include-ing it themselves as they + * should, so also for their sake, we keep the #include to be consistent with + * prior Tcl releases. */ -#ifndef TCL_THREADS -#define Tcl_MutexLock(mutexPtr) -#define Tcl_MutexUnlock(mutexPtr) -#define Tcl_MutexFinalize(mutexPtr) -#define Tcl_ConditionNotify(condPtr) -#define Tcl_ConditionWait(condPtr, mutexPtr, timePtr) -#define Tcl_ConditionFinalize(condPtr) -#endif /* TCL_THREADS */ - - -#ifndef BUFSIZ -# include <stdio.h> -#endif - +#include <stdio.h> /* - * Definitions that allow Tcl functions with variable numbers of - * arguments to be used with either varargs.h or stdarg.h. TCL_VARARGS - * is used in procedure prototypes. TCL_VARARGS_DEF is used to declare - * the arguments in a function definiton: it takes the type and name of - * the first argument and supplies the appropriate argument declaration - * string for use in the function definition. TCL_VARARGS_START - * initializes the va_list data structure and returns the first argument. + * Support for functions with a variable number of arguments. + * + * The following TCL_VARARGS* macros are to support old extensions + * written for older versions of Tcl where the macros permitted + * support for the varargs.h system as well as stdarg.h . + * + * New code should just directly be written to use stdarg.h conventions. */ -#if !defined(NO_STDARG) -# include <stdarg.h> -# define TCL_VARARGS(type, name) (type name, ...) -# define TCL_VARARGS_DEF(type, name) (type name, ...) -# define TCL_VARARGS_START(type, name, list) (va_start(list, name), name) -#else -# include <varargs.h> -# define TCL_VARARGS(type, name) () -# define TCL_VARARGS_DEF(type, name) (va_alist) -# define TCL_VARARGS_START(type, name, list) \ - (va_start(list), va_arg(list, type)) + +#include <stdarg.h> +#ifndef TCL_NO_DEPRECATED +# define TCL_VARARGS(type, name) (type name, ...) +# define TCL_VARARGS_DEF(type, name) (type name, ...) +# define TCL_VARARGS_START(type, name, list) (va_start(list, name), name) #endif /* - * Macros used to declare a function to be exported by a DLL. - * Used by Windows, maps to no-op declarations on non-Windows systems. - * The default build on windows is for a DLL, which causes the DLLIMPORT - * and DLLEXPORT macros to be nonempty. To build a static library, the - * macro STATIC_BUILD should be defined. + * Macros used to declare a function to be exported by a DLL. Used by Windows, + * maps to no-op declarations on non-Windows systems. The default build on + * windows is for a DLL, which causes the DLLIMPORT and DLLEXPORT macros to be + * nonempty. To build a static library, the macro STATIC_BUILD should be + * defined. + * + * Note: when building static but linking dynamically to MSVCRT we must still + * correctly decorate the C library imported function. Use CRTIMPORT + * for this purpose. _DLL is defined by the compiler when linking to + * MSVCRT. */ #if (defined(__WIN32__) && (defined(_MSC_VER) || (__BORLANDC__ >= 0x0550) || defined(__LCC__) || defined(__WATCOMC__) || (defined(__GNUC__) && defined(__declspec)))) +# define HAVE_DECLSPEC 1 # ifdef STATIC_BUILD # define DLLIMPORT # define DLLEXPORT +# ifdef _DLL +# define CRTIMPORT __declspec(dllimport) +# else +# define CRTIMPORT +# endif # else # define DLLIMPORT __declspec(dllimport) # define DLLEXPORT __declspec(dllexport) +# define CRTIMPORT __declspec(dllimport) # endif #else # define DLLIMPORT @@ -207,23 +190,25 @@ extern "C" { # else # define DLLEXPORT # endif +# define CRTIMPORT #endif /* * These macros are used to control whether functions are being declared for - * import or export. If a function is being declared while it is being built + * import or export. If a function is being declared while it is being built * to be included in a shared library, then it should have the DLLEXPORT - * storage class. If is being declared for use by a module that is going to + * storage class. If is being declared for use by a module that is going to * link against the shared library, then it should have the DLLIMPORT storage - * class. If the symbol is beind declared for a static build or for use from a + * class. If the symbol is beind declared for a static build or for use from a * stub library, then the storage class should be empty. * - * The convention is that a macro called BUILD_xxxx, where xxxx is the - * name of a library we are building, is set on the compile line for sources - * that are to be placed in the library. When this macro is set, the - * storage class will be set to DLLEXPORT. At the end of the header file, the - * storage class will be reset to DLLIMPORT. + * The convention is that a macro called BUILD_xxxx, where xxxx is the name of + * a library we are building, is set on the compile line for sources that are + * to be placed in the library. When this macro is set, the storage class will + * be set to DLLEXPORT. At the end of the header file, the storage class will + * be reset to DLLIMPORT. */ + #undef TCL_STORAGE_CLASS #ifdef BUILD_tcl # define TCL_STORAGE_CLASS DLLEXPORT @@ -236,8 +221,8 @@ extern "C" { #endif /* - * Definitions that allow this header file to be used either with or - * without ANSI C features like function prototypes. + * Definitions that allow this header file to be used either with or without + * ANSI C features like function prototypes. */ #undef _ANSI_ARGS_ @@ -275,7 +260,7 @@ extern "C" { #endif /* - * Make sure EXTERN isn't defined elsewhere + * Make sure EXTERN isn't defined elsewhere. */ #ifdef EXTERN @@ -289,12 +274,9 @@ extern "C" { #endif /* - * The following code is copied from winnt.h. - * If we don't replicate it here, then <windows.h> can't be included - * after tcl.h, since tcl.h also defines VOID. - * This block is skipped under Cygwin and Mingw. - * - * + * The following code is copied from winnt.h. If we don't replicate it here, + * then <windows.h> can't be included after tcl.h, since tcl.h also defines + * VOID. This block is skipped under Cygwin and Mingw. */ #if defined(__WIN32__) && !defined(HAVE_WINNT_IGNORE_VOID) @@ -307,15 +289,14 @@ typedef long LONG; #endif /* __WIN32__ && !HAVE_WINNT_IGNORE_VOID */ /* - * Macro to use instead of "void" for arguments that must have - * type "void *" in ANSI C; maps them to type "char *" in - * non-ANSI systems. + * Macro to use instead of "void" for arguments that must have type "void *" + * in ANSI C; maps them to type "char *" in non-ANSI systems. */ #ifndef NO_VOID -# define VOID void +#define VOID void #else -# define VOID char +#define VOID char #endif /* @@ -340,22 +321,23 @@ typedef long LONG; # ifdef __LP64__ # undef TCL_WIDE_INT_TYPE # define TCL_WIDE_INT_IS_LONG 1 +# define TCL_CFG_DO64BIT 1 # else /* !__LP64__ */ # define TCL_WIDE_INT_TYPE long long # undef TCL_WIDE_INT_IS_LONG +# undef TCL_CFG_DO64BIT # endif /* __LP64__ */ # undef HAVE_STRUCT_STAT64 -# include <mach/mach.h> #endif /* __APPLE__ */ /* - * Define Tcl_WideInt to be a type that is (at least) 64-bits wide, - * and define Tcl_WideUInt to be the unsigned variant of that type - * (assuming that where we have one, we can have the other.) + * Define Tcl_WideInt to be a type that is (at least) 64-bits wide, and define + * Tcl_WideUInt to be the unsigned variant of that type (assuming that where + * we have one, we can have the other.) * * Also defines the following macros: - * TCL_WIDE_INT_IS_LONG - if wide ints are really longs (i.e. we're on - * a real 64-bit system.) + * TCL_WIDE_INT_IS_LONG - if wide ints are really longs (i.e. we're on a real + * 64-bit system.) * Tcl_WideAsLong - forgetful converter from wideInt to long. * Tcl_LongAsWide - sign-extending converter from long to wideInt. * Tcl_WideAsDouble - converter from wideInt to double. @@ -364,12 +346,9 @@ typedef long LONG; * The following invariant should hold for any long value 'longVal': * longVal == Tcl_WideAsLong(Tcl_LongAsWide(longVal)) * - * Note on converting between Tcl_WideInt and strings. This - * implementation (in tclObj.c) depends on the functions strtoull() - * and sprintf(...,"%" TCL_LL_MODIFIER "d",...). TCL_LL_MODIFIER_SIZE - * is the length of the modifier string, which is "ll" on most 32-bit - * Unix systems. It has to be split up like this to allow for the more - * complex formats sometimes needed (e.g. in the format(n) command.) + * Note on converting between Tcl_WideInt and strings. This implementation (in + * tclObj.c) depends on the function + * sprintf(...,"%" TCL_LL_MODIFIER "d",...). */ #if !defined(TCL_WIDE_INT_TYPE)&&!defined(TCL_WIDE_INT_IS_LONG) @@ -378,7 +357,6 @@ typedef long LONG; # ifdef __BORLANDC__ typedef struct stati64 Tcl_StatBuf; # define TCL_LL_MODIFIER "L" -# define TCL_LL_MODIFIER_SIZE 1 # else /* __BORLANDC__ */ # if defined(_WIN64) typedef struct __stat64 Tcl_StatBuf; @@ -388,12 +366,10 @@ typedef struct _stati64 Tcl_StatBuf; typedef struct _stat32i64 Tcl_StatBuf; # endif /* _MSC_VER < 1400 */ # define TCL_LL_MODIFIER "I64" -# define TCL_LL_MODIFIER_SIZE 3 # endif /* __BORLANDC__ */ # elif defined(__GNUC__) # define TCL_WIDE_INT_TYPE long long # define TCL_LL_MODIFIER "ll" -# define TCL_LL_MODIFIER_SIZE 2 # if defined(__WIN32__) typedef struct _stat32i64 Tcl_StatBuf; # else @@ -401,8 +377,8 @@ typedef struct stat Tcl_StatBuf; # endif # else /* ! __WIN32__ && ! __GNUC__ */ /* - * Don't know what platform it is and configure hasn't discovered what - * is going on for us. Try to guess... + * Don't know what platform it is and configure hasn't discovered what is + * going on for us. Try to guess... */ # ifdef NO_LIMITS_H # error please define either TCL_WIDE_INT_TYPE or TCL_WIDE_INT_IS_LONG @@ -432,12 +408,11 @@ typedef struct stat Tcl_StatBuf; # define Tcl_DoubleAsWide(val) ((long)((double)(val))) # ifndef TCL_LL_MODIFIER # define TCL_LL_MODIFIER "l" -# define TCL_LL_MODIFIER_SIZE 1 # endif /* !TCL_LL_MODIFIER */ #else /* TCL_WIDE_INT_IS_LONG */ /* - * The next short section of defines are only done when not running on - * Windows or some other strange platform. + * The next short section of defines are only done when not running on Windows + * or some other strange platform. */ # ifndef TCL_LL_MODIFIER # ifdef __CYGWIN__ @@ -460,7 +435,6 @@ typedef struct stat64 Tcl_StatBuf; typedef struct stat Tcl_StatBuf; # endif /* HAVE_STRUCT_STAT64 */ # define TCL_LL_MODIFIER "ll" -# define TCL_LL_MODIFIER_SIZE 2 # endif /* !TCL_LL_MODIFIER */ # define Tcl_WideAsLong(val) ((long)((Tcl_WideInt)(val))) # define Tcl_LongAsWide(val) ((Tcl_WideInt)((long)(val))) @@ -468,32 +442,21 @@ typedef struct stat Tcl_StatBuf; # define Tcl_DoubleAsWide(val) ((Tcl_WideInt)((double)(val))) #endif /* TCL_WIDE_INT_IS_LONG */ - /* - * This flag controls whether binary compatability is maintained with - * extensions built against a previous version of Tcl. This is true - * by default. - */ -#ifndef TCL_PRESERVE_BINARY_COMPATABILITY -# define TCL_PRESERVE_BINARY_COMPATABILITY 1 -#endif - - -/* - * Data structures defined opaquely in this module. The definitions below - * just provide dummy types. A few fields are made visible in Tcl_Interp - * structures, namely those used for returning a string result from - * commands. Direct access to the result field is discouraged in Tcl 8.0. - * The interpreter result is either an object or a string, and the two - * values are kept consistent unless some C code sets interp->result - * directly. Programmers should use either the procedure Tcl_GetObjResult() - * or Tcl_GetStringResult() to read the interpreter's result. See the - * SetResult man page for details. - * - * Note: any change to the Tcl_Interp definition below must be mirrored - * in the "real" definition in tclInt.h. + * Data structures defined opaquely in this module. The definitions below just + * provide dummy types. A few fields are made visible in Tcl_Interp + * structures, namely those used for returning a string result from commands. + * Direct access to the result field is discouraged in Tcl 8.0. The + * interpreter result is either an object or a string, and the two values are + * kept consistent unless some C code sets interp->result directly. + * Programmers should use either the function Tcl_GetObjResult() or + * Tcl_GetStringResult() to read the interpreter's result. See the SetResult + * man page for details. + * + * Note: any change to the Tcl_Interp definition below must be mirrored in the + * "real" definition in tclInt.h. * - * Note: Tcl_ObjCmdProc procedures do not directly set result and freeProc. + * Note: Tcl_ObjCmdProc functions do not directly set result and freeProc. * Instead, they set a Tcl_Obj member in the "real" structure that can be * accessed with Tcl_GetObjResult() and Tcl_SetObjResult(). */ @@ -502,25 +465,29 @@ typedef struct Tcl_Interp { char *result; /* If the last command returned a string * result, this points to it. */ void (*freeProc) _ANSI_ARGS_((char *blockPtr)); - /* Zero means the string result is - * statically allocated. TCL_DYNAMIC means - * it was allocated with ckalloc and should - * be freed with ckfree. Other values give - * the address of procedure to invoke to - * free the result. Tcl_Eval must free it - * before executing next command. */ - int errorLine; /* When TCL_ERROR is returned, this gives - * the line number within the command where - * the error occurred (1 if first line). */ + /* Zero means the string result is statically + * allocated. TCL_DYNAMIC means it was + * allocated with ckalloc and should be freed + * with ckfree. Other values give the address + * of function to invoke to free the result. + * Tcl_Eval must free it before executing next + * command. */ + int errorLine; /* When TCL_ERROR is returned, this gives the + * line number within the command where the + * error occurred (1 if first line). */ } Tcl_Interp; typedef struct Tcl_AsyncHandler_ *Tcl_AsyncHandler; typedef struct Tcl_Channel_ *Tcl_Channel; +typedef struct Tcl_ChannelTypeVersion_ *Tcl_ChannelTypeVersion; typedef struct Tcl_Command_ *Tcl_Command; typedef struct Tcl_Condition_ *Tcl_Condition; +typedef struct Tcl_Dict_ *Tcl_Dict; typedef struct Tcl_EncodingState_ *Tcl_EncodingState; typedef struct Tcl_Encoding_ *Tcl_Encoding; typedef struct Tcl_Event Tcl_Event; +typedef struct Tcl_InterpState_ *Tcl_InterpState; +typedef struct Tcl_LoadHandle_ *Tcl_LoadHandle; typedef struct Tcl_Mutex_ *Tcl_Mutex; typedef struct Tcl_Pid_ *Tcl_Pid; typedef struct Tcl_RegExp_ *Tcl_RegExp; @@ -529,18 +496,14 @@ typedef struct Tcl_ThreadId_ *Tcl_ThreadId; typedef struct Tcl_TimerToken_ *Tcl_TimerToken; typedef struct Tcl_Trace_ *Tcl_Trace; typedef struct Tcl_Var_ *Tcl_Var; -typedef struct Tcl_ChannelTypeVersion_ *Tcl_ChannelTypeVersion; -typedef struct Tcl_LoadHandle_ *Tcl_LoadHandle; /* - * Definition of the interface to procedures implementing threads. - * A procedure following this definition is given to each call of - * 'Tcl_CreateThread' and will be called as the main fuction of - * the new thread created by that call. + * Definition of the interface to functions implementing threads. A function + * following this definition is given to each call of 'Tcl_CreateThread' and + * will be called as the main fuction of the new thread created by that call. */ -#ifdef MAC_TCL -typedef pascal void *(Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); -#elif defined __WIN32__ + +#if defined __WIN32__ typedef unsigned (__stdcall Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); #else typedef void (Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); @@ -548,13 +511,11 @@ typedef void (Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); /* * Threading function return types used for abstracting away platform - * differences when writing a Tcl_ThreadCreateProc. See the NewThread - * function in generic/tclThreadTest.c for it's usage. + * differences when writing a Tcl_ThreadCreateProc. See the NewThread function + * in generic/tclThreadTest.c for it's usage. */ -#ifdef MAC_TCL -# define Tcl_ThreadCreateType pascal void * -# define TCL_THREAD_CREATE_RETURN return NULL -#elif defined __WIN32__ + +#if defined __WIN32__ # define Tcl_ThreadCreateType unsigned __stdcall # define TCL_THREAD_CREATE_RETURN return 0 #else @@ -567,68 +528,68 @@ typedef void (Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); * given to Tcl_CreateThread. */ -#define TCL_THREAD_STACK_DEFAULT (0) /* Use default size for stack */ -#define TCL_THREAD_NOFLAGS (0000) /* Standard flags, default behaviour */ -#define TCL_THREAD_JOINABLE (0001) /* Mark the thread as joinable */ +#define TCL_THREAD_STACK_DEFAULT (0) /* Use default size for stack. */ +#define TCL_THREAD_NOFLAGS (0000) /* Standard flags, default + * behaviour. */ +#define TCL_THREAD_JOINABLE (0001) /* Mark the thread as joinable. */ /* - * Flag values passed to Tcl_GetRegExpFromObj. + * Flag values passed to Tcl_StringCaseMatch. */ -#define TCL_REG_BASIC 000000 /* BREs (convenience) */ -#define TCL_REG_EXTENDED 000001 /* EREs */ -#define TCL_REG_ADVF 000002 /* advanced features in EREs */ -#define TCL_REG_ADVANCED 000003 /* AREs (which are also EREs) */ -#define TCL_REG_QUOTE 000004 /* no special characters, none */ -#define TCL_REG_NOCASE 000010 /* ignore case */ -#define TCL_REG_NOSUB 000020 /* don't care about subexpressions */ -#define TCL_REG_EXPANDED 000040 /* expanded format, white space & - * comments */ -#define TCL_REG_NLSTOP 000100 /* \n doesn't match . or [^ ] */ -#define TCL_REG_NLANCH 000200 /* ^ matches after \n, $ before */ -#define TCL_REG_NEWLINE 000300 /* newlines are line terminators */ -#define TCL_REG_CANMATCH 001000 /* report details on partial/limited - * matches */ + +#define TCL_MATCH_NOCASE (1<<0) /* - * The following flag is experimental and only intended for use by Expect. It - * will probably go away in a later release. + * Flag values passed to Tcl_GetRegExpFromObj. */ -#define TCL_REG_BOSONLY 002000 /* prepend \A to pattern so it only - * matches at the beginning of the - * string. */ +#define TCL_REG_BASIC 000000 /* BREs (convenience). */ +#define TCL_REG_EXTENDED 000001 /* EREs. */ +#define TCL_REG_ADVF 000002 /* Advanced features in EREs. */ +#define TCL_REG_ADVANCED 000003 /* AREs (which are also EREs). */ +#define TCL_REG_QUOTE 000004 /* No special characters, none. */ +#define TCL_REG_NOCASE 000010 /* Ignore case. */ +#define TCL_REG_NOSUB 000020 /* Don't care about subexpressions. */ +#define TCL_REG_EXPANDED 000040 /* Expanded format, white space & + * comments. */ +#define TCL_REG_NLSTOP 000100 /* \n doesn't match . or [^ ] */ +#define TCL_REG_NLANCH 000200 /* ^ matches after \n, $ before. */ +#define TCL_REG_NEWLINE 000300 /* Newlines are line terminators. */ +#define TCL_REG_CANMATCH 001000 /* Report details on partial/limited + * matches. */ /* * Flags values passed to Tcl_RegExpExecObj. */ + #define TCL_REG_NOTBOL 0001 /* Beginning of string does not match ^. */ #define TCL_REG_NOTEOL 0002 /* End of string does not match $. */ /* - * Structures filled in by Tcl_RegExpInfo. Note that all offset values are - * relative to the start of the match string, not the beginning of the - * entire string. + * Structures filled in by Tcl_RegExpInfo. Note that all offset values are + * relative to the start of the match string, not the beginning of the entire + * string. */ typedef struct Tcl_RegExpIndices { - long start; /* character offset of first character in match */ - long end; /* character offset of first character after the - * match. */ + long start; /* Character offset of first character in + * match. */ + long end; /* Character offset of first character after + * the match. */ } Tcl_RegExpIndices; typedef struct Tcl_RegExpInfo { - int nsubs; /* number of subexpressions in the - * compiled expression */ - Tcl_RegExpIndices *matches; /* array of nsubs match offset - * pairs */ - long extendStart; /* The offset at which a subsequent - * match might begin. */ + int nsubs; /* Number of subexpressions in the compiled + * expression. */ + Tcl_RegExpIndices *matches; /* Array of nsubs match offset pairs. */ + long extendStart; /* The offset at which a subsequent match + * might begin. */ long reserved; /* Reserved for later use. */ } Tcl_RegExpInfo; /* - * Picky compilers complain if this typdef doesn't appear before the - * struct's reference in tclDecls.h. + * Picky compilers complain if this typdef doesn't appear before the struct's + * reference in tclDecls.h. */ typedef Tcl_StatBuf *Tcl_Stat_; @@ -636,32 +597,31 @@ typedef struct stat *Tcl_OldStat_; /* * When a TCL command returns, the interpreter contains a result from the - * command. Programmers are strongly encouraged to use one of the - * procedures Tcl_GetObjResult() or Tcl_GetStringResult() to read the - * interpreter's result. See the SetResult man page for details. Besides - * this result, the command procedure returns an integer code, which is - * one of the following: + * command. Programmers are strongly encouraged to use one of the functions + * Tcl_GetObjResult() or Tcl_GetStringResult() to read the interpreter's + * result. See the SetResult man page for details. Besides this result, the + * command function returns an integer code, which is one of the following: * - * TCL_OK Command completed normally; the interpreter's - * result contains the command's result. - * TCL_ERROR The command couldn't be completed successfully; - * the interpreter's result describes what went wrong. - * TCL_RETURN The command requests that the current procedure - * return; the interpreter's result contains the - * procedure's return value. - * TCL_BREAK The command requests that the innermost loop - * be exited; the interpreter's result is meaningless. - * TCL_CONTINUE Go on to the next iteration of the current loop; - * the interpreter's result is meaningless. + * TCL_OK Command completed normally; the interpreter's result + * contains the command's result. + * TCL_ERROR The command couldn't be completed successfully; the + * interpreter's result describes what went wrong. + * TCL_RETURN The command requests that the current function return; + * the interpreter's result contains the function's + * return value. + * TCL_BREAK The command requests that the innermost loop be + * exited; the interpreter's result is meaningless. + * TCL_CONTINUE Go on to the next iteration of the current loop; the + * interpreter's result is meaningless. */ -#define TCL_OK 0 -#define TCL_ERROR 1 -#define TCL_RETURN 2 -#define TCL_BREAK 3 -#define TCL_CONTINUE 4 +#define TCL_OK 0 +#define TCL_ERROR 1 +#define TCL_RETURN 2 +#define TCL_BREAK 3 +#define TCL_CONTINUE 4 -#define TCL_RESULT_SIZE 200 +#define TCL_RESULT_SIZE 200 /* * Flags to control what substitutions are performed by Tcl_SubstObj(): @@ -672,16 +632,17 @@ typedef struct stat *Tcl_OldStat_; #define TCL_SUBST_BACKSLASHES 004 #define TCL_SUBST_ALL 007 - /* * Argument descriptors for math function callbacks in expressions: */ + typedef enum { TCL_INT, TCL_DOUBLE, TCL_EITHER, TCL_WIDE_INT } Tcl_ValueType; + typedef struct Tcl_Value { - Tcl_ValueType type; /* Indicates intValue or doubleValue is - * valid, or both. */ + Tcl_ValueType type; /* Indicates intValue or doubleValue is valid, + * or both. */ long intValue; /* Integer value. */ double doubleValue; /* Double-precision floating value. */ Tcl_WideInt wideValue; /* Wide (min. 64-bit) integer value. */ @@ -689,13 +650,13 @@ typedef struct Tcl_Value { /* * Forward declaration of Tcl_Obj to prevent an error when the forward - * reference to Tcl_Obj is encountered in the procedure types declared - * below. + * reference to Tcl_Obj is encountered in the function types declared below. */ + struct Tcl_Obj; /* - * Procedure types defined by Tcl: + * Function types defined by Tcl: */ typedef int (Tcl_AppInitProc) _ANSI_ARGS_((Tcl_Interp *interp)); @@ -741,7 +702,9 @@ typedef void (Tcl_NamespaceDeleteProc) _ANSI_ARGS_((ClientData clientData)); typedef int (Tcl_ObjCmdProc) _ANSI_ARGS_((ClientData clientData, Tcl_Interp *interp, int objc, struct Tcl_Obj * CONST * objv)); typedef int (Tcl_PackageInitProc) _ANSI_ARGS_((Tcl_Interp *interp)); -typedef void (Tcl_PanicProc) _ANSI_ARGS_(TCL_VARARGS(CONST char *, format)); +typedef int (Tcl_PackageUnloadProc) _ANSI_ARGS_((Tcl_Interp *interp, + int flags)); +typedef void (Tcl_PanicProc) _ANSI_ARGS_((CONST char *format, ...)); typedef void (Tcl_TcpAcceptProc) _ANSI_ARGS_((ClientData callbackData, Tcl_Channel chan, char *address, int port)); typedef void (Tcl_TimerProc) _ANSI_ARGS_((ClientData clientData)); @@ -762,37 +725,35 @@ typedef void (Tcl_ServiceModeHookProc) _ANSI_ARGS_((int mode)); typedef ClientData (Tcl_InitNotifierProc) _ANSI_ARGS_((VOID)); typedef void (Tcl_FinalizeNotifierProc) _ANSI_ARGS_((ClientData clientData)); typedef void (Tcl_MainLoopProc) _ANSI_ARGS_((void)); - + /* - * The following structure represents a type of object, which is a - * particular internal representation for an object plus a set of - * procedures that provide standard operations on objects of that type. + * The following structure represents a type of object, which is a particular + * internal representation for an object plus a set of functions that provide + * standard operations on objects of that type. */ typedef struct Tcl_ObjType { char *name; /* Name of the type, e.g. "int". */ Tcl_FreeInternalRepProc *freeIntRepProc; /* Called to free any storage for the type's - * internal rep. NULL if the internal rep - * does not need freeing. */ + * internal rep. NULL if the internal rep does + * not need freeing. */ Tcl_DupInternalRepProc *dupIntRepProc; - /* Called to create a new object as a copy - * of an existing object. */ + /* Called to create a new object as a copy of + * an existing object. */ Tcl_UpdateStringProc *updateStringProc; - /* Called to update the string rep from the + /* Called to update the string rep from the * type's internal representation. */ Tcl_SetFromAnyProc *setFromAnyProc; - /* Called to convert the object's internal - * rep to this type. Frees the internal rep - * of the old type. Returns TCL_ERROR on - * failure. */ + /* Called to convert the object's internal rep + * to this type. Frees the internal rep of the + * old type. Returns TCL_ERROR on failure. */ } Tcl_ObjType; - /* - * One of the following structures exists for each object in the Tcl - * system. An object stores a value as either a string, some internal - * representation, or both. + * One of the following structures exists for each object in the Tcl system. + * An object stores a value as either a string, some internal representation, + * or both. */ typedef struct Tcl_Obj { @@ -802,98 +763,57 @@ typedef struct Tcl_Obj { * must be followed by a null byte (i.e., at * offset length) but may also contain * embedded null characters. The array's - * storage is allocated by ckalloc. NULL - * means the string rep is invalid and must - * be regenerated from the internal rep. - * Clients should use Tcl_GetStringFromObj - * or Tcl_GetString to get a pointer to the - * byte array as a readonly value. */ + * storage is allocated by ckalloc. NULL means + * the string rep is invalid and must be + * regenerated from the internal rep. Clients + * should use Tcl_GetStringFromObj or + * Tcl_GetString to get a pointer to the byte + * array as a readonly value. */ int length; /* The number of bytes at *bytes, not * including the terminating null. */ Tcl_ObjType *typePtr; /* Denotes the object's type. Always * corresponds to the type of the object's - * internal rep. NULL indicates the object - * has no internal rep (has no type). */ + * internal rep. NULL indicates the object has + * no internal rep (has no type). */ union { /* The internal representation: */ - long longValue; /* - an long integer value */ - double doubleValue; /* - a double-precision floating value */ - VOID *otherValuePtr; /* - another, type-specific value */ - Tcl_WideInt wideValue; /* - a long long value */ - struct { /* - internal rep as two pointers */ + long longValue; /* - an long integer value. */ + double doubleValue; /* - a double-precision floating value. */ + VOID *otherValuePtr; /* - another, type-specific value. */ + Tcl_WideInt wideValue; /* - a long long value. */ + struct { /* - internal rep as two pointers. */ VOID *ptr1; VOID *ptr2; } twoPtrValue; + struct { /* - internal rep as a wide int, tightly + * packed fields. */ + VOID *ptr; /* Pointer to digits. */ + unsigned long value;/* Alloc, used, and signum packed into a + * single word. */ + } ptrAndLongRep; } internalRep; } Tcl_Obj; - /* - * Macros to increment and decrement a Tcl_Obj's reference count, and to - * test whether an object is shared (i.e. has reference count > 1). - * Note: clients should use Tcl_DecrRefCount() when they are finished using - * an object, and should never call TclFreeObj() directly. TclFreeObj() is - * only defined and made public in tcl.h to support Tcl_DecrRefCount's macro - * definition. Note also that Tcl_DecrRefCount() refers to the parameter - * "obj" twice. This means that you should avoid calling it with an - * expression that is expensive to compute or has side effects. + * Macros to increment and decrement a Tcl_Obj's reference count, and to test + * whether an object is shared (i.e. has reference count > 1). Note: clients + * should use Tcl_DecrRefCount() when they are finished using an object, and + * should never call TclFreeObj() directly. TclFreeObj() is only defined and + * made public in tcl.h to support Tcl_DecrRefCount's macro definition. Note + * also that Tcl_DecrRefCount() refers to the parameter "obj" twice. This + * means that you should avoid calling it with an expression that is expensive + * to compute or has side effects. */ + void Tcl_IncrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr)); void Tcl_DecrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr)); int Tcl_IsShared _ANSI_ARGS_((Tcl_Obj *objPtr)); - -#ifdef TCL_MEM_DEBUG -# define Tcl_IncrRefCount(objPtr) \ - Tcl_DbIncrRefCount(objPtr, __FILE__, __LINE__) -# define Tcl_DecrRefCount(objPtr) \ - Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__) -# define Tcl_IsShared(objPtr) \ - Tcl_DbIsShared(objPtr, __FILE__, __LINE__) -#else -# define Tcl_IncrRefCount(objPtr) \ - ++(objPtr)->refCount - /* - * Use do/while0 idiom for optimum correctness without compiler warnings - * http://c2.com/cgi/wiki?TrivialDoWhileLoop - */ -# define Tcl_DecrRefCount(objPtr) \ - do { if (--(objPtr)->refCount <= 0) TclFreeObj(objPtr); } while(0) -# define Tcl_IsShared(objPtr) \ - ((objPtr)->refCount > 1) -#endif /* - * Macros and definitions that help to debug the use of Tcl objects. - * When TCL_MEM_DEBUG is defined, the Tcl_New declarations are - * overridden to call debugging versions of the object creation procedures. + * The following structure contains the state needed by Tcl_SaveResult. No-one + * outside of Tcl should access any of these fields. This structure is + * typically allocated on the stack. */ -#ifdef TCL_MEM_DEBUG -# define Tcl_NewBooleanObj(val) \ - Tcl_DbNewBooleanObj(val, __FILE__, __LINE__) -# define Tcl_NewByteArrayObj(bytes, len) \ - Tcl_DbNewByteArrayObj(bytes, len, __FILE__, __LINE__) -# define Tcl_NewDoubleObj(val) \ - Tcl_DbNewDoubleObj(val, __FILE__, __LINE__) -# define Tcl_NewIntObj(val) \ - Tcl_DbNewLongObj(val, __FILE__, __LINE__) -# define Tcl_NewListObj(objc, objv) \ - Tcl_DbNewListObj(objc, objv, __FILE__, __LINE__) -# define Tcl_NewLongObj(val) \ - Tcl_DbNewLongObj(val, __FILE__, __LINE__) -# define Tcl_NewObj() \ - Tcl_DbNewObj(__FILE__, __LINE__) -# define Tcl_NewStringObj(bytes, len) \ - Tcl_DbNewStringObj(bytes, len, __FILE__, __LINE__) -# define Tcl_NewWideIntObj(val) \ - Tcl_DbNewWideIntObj(val, __FILE__, __LINE__) -#endif /* TCL_MEM_DEBUG */ - - -/* - * The following structure contains the state needed by - * Tcl_SaveResult. No-one outside of Tcl should access any of these - * fields. This structure is typically allocated on the stack. - */ typedef struct Tcl_SavedResult { char *result; Tcl_FreeProc *freeProc; @@ -905,46 +825,46 @@ typedef struct Tcl_SavedResult { } Tcl_SavedResult; /* - * The following definitions support Tcl's namespace facility. - * Note: the first five fields must match exactly the fields in a - * Namespace structure (see tclInt.h). + * The following definitions support Tcl's namespace facility. Note: the first + * five fields must match exactly the fields in a Namespace structure (see + * tclInt.h). */ typedef struct Tcl_Namespace { - char *name; /* The namespace's name within its parent - * namespace. This contains no ::'s. The - * name of the global namespace is "" - * although "::" is an synonym. */ - char *fullName; /* The namespace's fully qualified name. - * This starts with ::. */ - ClientData clientData; /* Arbitrary value associated with this + char *name; /* The namespace's name within its parent + * namespace. This contains no ::'s. The name + * of the global namespace is "" although "::" + * is an synonym. */ + char *fullName; /* The namespace's fully qualified name. This + * starts with ::. */ + ClientData clientData; /* Arbitrary value associated with this * namespace. */ - Tcl_NamespaceDeleteProc* deleteProc; - /* Procedure invoked when deleting the + Tcl_NamespaceDeleteProc *deleteProc; + /* Function invoked when deleting the * namespace to, e.g., free clientData. */ - struct Tcl_Namespace* parentPtr; - /* Points to the namespace that contains - * this one. NULL if this is the global + struct Tcl_Namespace *parentPtr; + /* Points to the namespace that contains this + * one. NULL if this is the global * namespace. */ } Tcl_Namespace; /* - * The following structure represents a call frame, or activation record. - * A call frame defines a naming context for a procedure call: its local - * scope (for local variables) and its namespace scope (used for non-local - * variables; often the global :: namespace). A call frame can also define - * the naming context for a namespace eval or namespace inscope command: - * the namespace in which the command's code should execute. The - * Tcl_CallFrame structures exist only while procedures or namespace - * eval/inscope's are being executed, and provide a Tcl call stack. - * - * A call frame is initialized and pushed using Tcl_PushCallFrame and - * popped using Tcl_PopCallFrame. Storage for a Tcl_CallFrame must be - * provided by the Tcl_PushCallFrame caller, and callers typically allocate - * them on the C call stack for efficiency. For this reason, Tcl_CallFrame - * is defined as a structure and not as an opaque token. However, most - * Tcl_CallFrame fields are hidden since applications should not access - * them directly; others are declared as "dummyX". + * The following structure represents a call frame, or activation record. A + * call frame defines a naming context for a procedure call: its local scope + * (for local variables) and its namespace scope (used for non-local + * variables; often the global :: namespace). A call frame can also define the + * naming context for a namespace eval or namespace inscope command: the + * namespace in which the command's code should execute. The Tcl_CallFrame + * structures exist only while procedures or namespace eval/inscope's are + * being executed, and provide a Tcl call stack. + * + * A call frame is initialized and pushed using Tcl_PushCallFrame and popped + * using Tcl_PopCallFrame. Storage for a Tcl_CallFrame must be provided by the + * Tcl_PushCallFrame caller, and callers typically allocate them on the C call + * stack for efficiency. For this reason, Tcl_CallFrame is defined as a + * structure and not as an opaque token. However, most Tcl_CallFrame fields + * are hidden since applications should not access them directly; others are + * declared as "dummyX". * * WARNING!! The structure definition must be kept consistent with the * CallFrame structure in tclInt.h. If you change one, change the other. @@ -969,57 +889,56 @@ typedef struct Tcl_CallFrame { /* * Information about commands that is returned by Tcl_GetCommandInfo and - * passed to Tcl_SetCommandInfo. objProc is an objc/objv object-based - * command procedure while proc is a traditional Tcl argc/argv - * string-based procedure. Tcl_CreateObjCommand and Tcl_CreateCommand - * ensure that both objProc and proc are non-NULL and can be called to - * execute the command. However, it may be faster to call one instead of - * the other. The member isNativeObjectProc is set to 1 if an - * object-based procedure was registered by Tcl_CreateObjCommand, and to - * 0 if a string-based procedure was registered by Tcl_CreateCommand. - * The other procedure is typically set to a compatibility wrapper that - * does string-to-object or object-to-string argument conversions then - * calls the other procedure. + * passed to Tcl_SetCommandInfo. objProc is an objc/objv object-based command + * function while proc is a traditional Tcl argc/argv string-based function. + * Tcl_CreateObjCommand and Tcl_CreateCommand ensure that both objProc and + * proc are non-NULL and can be called to execute the command. However, it may + * be faster to call one instead of the other. The member isNativeObjectProc + * is set to 1 if an object-based function was registered by + * Tcl_CreateObjCommand, and to 0 if a string-based function was registered by + * Tcl_CreateCommand. The other function is typically set to a compatibility + * wrapper that does string-to-object or object-to-string argument conversions + * then calls the other function. */ typedef struct Tcl_CmdInfo { - int isNativeObjectProc; /* 1 if objProc was registered by a call to - * Tcl_CreateObjCommand; 0 otherwise. - * Tcl_SetCmdInfo does not modify this - * field. */ - Tcl_ObjCmdProc *objProc; /* Command's object-based procedure. */ - ClientData objClientData; /* ClientData for object proc. */ - Tcl_CmdProc *proc; /* Command's string-based procedure. */ - ClientData clientData; /* ClientData for string proc. */ + int isNativeObjectProc; /* 1 if objProc was registered by a call to + * Tcl_CreateObjCommand; 0 otherwise. + * Tcl_SetCmdInfo does not modify this + * field. */ + Tcl_ObjCmdProc *objProc; /* Command's object-based function. */ + ClientData objClientData; /* ClientData for object proc. */ + Tcl_CmdProc *proc; /* Command's string-based function. */ + ClientData clientData; /* ClientData for string proc. */ Tcl_CmdDeleteProc *deleteProc; - /* Procedure to call when command is - * deleted. */ - ClientData deleteData; /* Value to pass to deleteProc (usually - * the same as clientData). */ - Tcl_Namespace *namespacePtr; /* Points to the namespace that contains - * this command. Note that Tcl_SetCmdInfo - * will not change a command's namespace; - * use Tcl_RenameCommand to do that. */ - + /* Function to call when command is + * deleted. */ + ClientData deleteData; /* Value to pass to deleteProc (usually the + * same as clientData). */ + Tcl_Namespace *namespacePtr;/* Points to the namespace that contains this + * command. Note that Tcl_SetCmdInfo will not + * change a command's namespace; use + * TclRenameCommand or Tcl_Eval (of 'rename') + * to do that. */ } Tcl_CmdInfo; /* - * The structure defined below is used to hold dynamic strings. The only - * field that clients should use is the string field, accessible via the - * macro Tcl_DStringValue. + * The structure defined below is used to hold dynamic strings. The only + * fields that clients should use are string and length, accessible via the + * macros Tcl_DStringValue and Tcl_DStringLength. */ #define TCL_DSTRING_STATIC_SIZE 200 typedef struct Tcl_DString { - char *string; /* Points to beginning of string: either + char *string; /* Points to beginning of string: either * staticSpace below or a malloced array. */ int length; /* Number of non-NULL characters in the * string. */ int spaceAvl; /* Total number of bytes available for the * string and its terminating NULL char. */ char staticSpace[TCL_DSTRING_STATIC_SIZE]; - /* Space to use in common case where string - * is small. */ + /* Space to use in common case where string is + * small. */ } Tcl_DString; #define Tcl_DStringLength(dsPtr) ((dsPtr)->length) @@ -1027,29 +946,34 @@ typedef struct Tcl_DString { #define Tcl_DStringTrunc Tcl_DStringSetLength /* - * Definitions for the maximum number of digits of precision that may - * be specified in the "tcl_precision" variable, and the number of - * bytes of buffer space required by Tcl_PrintDouble. + * Definitions for the maximum number of digits of precision that may be + * specified in the "tcl_precision" variable, and the number of bytes of + * buffer space required by Tcl_PrintDouble. */ -#define TCL_MAX_PREC 17 -#define TCL_DOUBLE_SPACE (TCL_MAX_PREC+10) +#define TCL_MAX_PREC 17 +#define TCL_DOUBLE_SPACE (TCL_MAX_PREC+10) /* * Definition for a number of bytes of buffer space sufficient to hold the - * string representation of an integer in base 10 (assuming the existence - * of 64-bit integers). + * string representation of an integer in base 10 (assuming the existence of + * 64-bit integers). */ #define TCL_INTEGER_SPACE 24 /* - * Flag that may be passed to Tcl_ConvertElement to force it not to - * output braces (careful! if you change this flag be sure to change - * the definitions at the front of tclUtil.c). + * Flag values passed to Tcl_ConvertElement. + * TCL_DONT_USE_BRACES forces it not to enclose the element in braces, but to + * use backslash quoting instead. + * TCL_DONT_QUOTE_HASH disables the default quoting of the '#' character. It + * is safe to leave the hash unquoted when the element is not the first + * element of a list, and this flag can be used by the caller to indicate + * that condition. */ #define TCL_DONT_USE_BRACES 1 +#define TCL_DONT_QUOTE_HASH 8 /* * Flag that may be passed to Tcl_GetIndexFromObj to force it to disallow @@ -1059,26 +983,36 @@ typedef struct Tcl_DString { #define TCL_EXACT 1 /* - * Flag values passed to Tcl_RecordAndEval and/or Tcl_EvalObj. - * WARNING: these bit choices must not conflict with the bit choices - * for evalFlag bits in tclInt.h!! + * Flag values passed to Tcl_RecordAndEval, Tcl_EvalObj, Tcl_EvalObjv. + * WARNING: these bit choices must not conflict with the bit choices for + * evalFlag bits in tclInt.h! + * + * Meanings: + * TCL_NO_EVAL: Just record this command + * TCL_EVAL_GLOBAL: Execute script in global namespace + * TCL_EVAL_DIRECT: Do not compile this script + * TCL_EVAL_INVOKE: Magical Tcl_EvalObjv mode for aliases/ensembles + * o Run in iPtr->lookupNsPtr or global namespace + * o Cut out of error traces + * o Don't reset the flags controlling ensemble + * error message rewriting. */ #define TCL_NO_EVAL 0x10000 #define TCL_EVAL_GLOBAL 0x20000 #define TCL_EVAL_DIRECT 0x40000 -#define TCL_EVAL_INVOKE 0x80000 +#define TCL_EVAL_INVOKE 0x80000 /* - * Special freeProc values that may be passed to Tcl_SetResult (see - * the man page for details): + * Special freeProc values that may be passed to Tcl_SetResult (see the man + * page for details): */ -#define TCL_VOLATILE ((Tcl_FreeProc *) 1) -#define TCL_STATIC ((Tcl_FreeProc *) 0) -#define TCL_DYNAMIC ((Tcl_FreeProc *) 3) +#define TCL_VOLATILE ((Tcl_FreeProc *) 1) +#define TCL_STATIC ((Tcl_FreeProc *) 0) +#define TCL_DYNAMIC ((Tcl_FreeProc *) 3) /* - * Flag values passed to variable-related procedures. + * Flag values passed to variable-related functions. */ #define TCL_GLOBAL_ONLY 1 @@ -1101,7 +1035,15 @@ typedef struct Tcl_DString { #define TCL_TRACE_RESULT_OBJECT 0x10000 /* - * Flag values passed to command-related procedures. + * Flag values for ensemble commands. + */ + +#define TCL_ENSEMBLE_PREFIX 0x02/* Flag value to say whether to allow + * unambiguous prefixes of commands or to + * require exact matches for command names. */ + +/* + * Flag values passed to command-related functions. */ #define TCL_TRACE_RENAME 0x2000 @@ -1110,32 +1052,34 @@ typedef struct Tcl_DString { #define TCL_ALLOW_INLINE_COMPILATION 0x20000 /* - * Flag values passed to Tcl_CreateObjTrace, and used internally - * by command execution traces. Slots 4,8,16 and 32 are - * used internally by execution traces (see tclCmdMZ.c) + * The TCL_PARSE_PART1 flag is deprecated and has no effect. The part1 is now + * always parsed whenever the part2 is NULL. (This is to avoid a common error + * when converting code to use the new object based APIs and forgetting to + * give the flag) */ -#define TCL_TRACE_ENTER_EXEC 1 -#define TCL_TRACE_LEAVE_EXEC 2 -/* - * The TCL_PARSE_PART1 flag is deprecated and has no effect. - * The part1 is now always parsed whenever the part2 is NULL. - * (This is to avoid a common error when converting code to - * use the new object based APIs and forgetting to give the - * flag) - */ #ifndef TCL_NO_DEPRECATED -# define TCL_PARSE_PART1 0x400 +# define TCL_PARSE_PART1 0x400 #endif /* * Types for linked variables: */ + #define TCL_LINK_INT 1 #define TCL_LINK_DOUBLE 2 #define TCL_LINK_BOOLEAN 3 #define TCL_LINK_STRING 4 #define TCL_LINK_WIDE_INT 5 +#define TCL_LINK_CHAR 6 +#define TCL_LINK_UCHAR 7 +#define TCL_LINK_SHORT 8 +#define TCL_LINK_USHORT 9 +#define TCL_LINK_UINT 10 +#define TCL_LINK_LONG 11 +#define TCL_LINK_ULONG 12 +#define TCL_LINK_FLOAT 13 +#define TCL_LINK_WIDE_UINT 14 #define TCL_LINK_READ_ONLY 0x80 /* @@ -1156,10 +1100,10 @@ typedef void (Tcl_FreeHashEntryProc) _ANSI_ARGS_((Tcl_HashEntry *hPtr)); /* * This flag controls whether the hash table stores the hash of a key, or - * recalculates it. There should be no reason for turning this flag off - * as it is completely binary and source compatible unless you directly - * access the bucketPtr member of the Tcl_HashTableEntry structure. This - * member has been removed and the space used to store the hash value. + * recalculates it. There should be no reason for turning this flag off as it + * is completely binary and source compatible unless you directly access the + * bucketPtr member of the Tcl_HashTableEntry structure. This member has been + * removed and the space used to store the hash value. */ #ifndef TCL_HASH_KEY_STORE_HASH @@ -1167,160 +1111,152 @@ typedef void (Tcl_FreeHashEntryProc) _ANSI_ARGS_((Tcl_HashEntry *hPtr)); #endif /* - * Structure definition for an entry in a hash table. No-one outside - * Tcl should access any of these fields directly; use the macros - * defined below. + * Structure definition for an entry in a hash table. No-one outside Tcl + * should access any of these fields directly; use the macros defined below. */ struct Tcl_HashEntry { - Tcl_HashEntry *nextPtr; /* Pointer to next entry in this - * hash bucket, or NULL for end of - * chain. */ - Tcl_HashTable *tablePtr; /* Pointer to table containing entry. */ + Tcl_HashEntry *nextPtr; /* Pointer to next entry in this hash bucket, + * or NULL for end of chain. */ + Tcl_HashTable *tablePtr; /* Pointer to table containing entry. */ #if TCL_HASH_KEY_STORE_HASH -# if TCL_PRESERVE_BINARY_COMPATABILITY - VOID *hash; /* Hash value, stored as pointer to - * ensure that the offsets of the - * fields in this structure are not - * changed. */ -# else - unsigned int hash; /* Hash value. */ -# endif + VOID *hash; /* Hash value, stored as pointer to ensure + * that the offsets of the fields in this + * structure are not changed. */ #else - Tcl_HashEntry **bucketPtr; /* Pointer to bucket that points to - * first entry in this entry's chain: - * used for deleting the entry. */ + Tcl_HashEntry **bucketPtr; /* Pointer to bucket that points to first + * entry in this entry's chain: used for + * deleting the entry. */ #endif - ClientData clientData; /* Application stores something here - * with Tcl_SetHashValue. */ - union { /* Key has one of these forms: */ - char *oneWordValue; /* One-word value for key. */ - Tcl_Obj *objPtr; /* Tcl_Obj * key value. */ - int words[1]; /* Multiple integer words for key. - * The actual size will be as large - * as necessary for this table's - * keys. */ - char string[4]; /* String for key. The actual size - * will be as large as needed to hold - * the key. */ - } key; /* MUST BE LAST FIELD IN RECORD!! */ + ClientData clientData; /* Application stores something here with + * Tcl_SetHashValue. */ + union { /* Key has one of these forms: */ + char *oneWordValue; /* One-word value for key. */ + Tcl_Obj *objPtr; /* Tcl_Obj * key value. */ + int words[1]; /* Multiple integer words for key. The actual + * size will be as large as necessary for this + * table's keys. */ + char string[4]; /* String for key. The actual size will be as + * large as needed to hold the key. */ + } key; /* MUST BE LAST FIELD IN RECORD!! */ }; /* * Flags used in Tcl_HashKeyType. * - * TCL_HASH_KEY_RANDOMIZE_HASH: + * TCL_HASH_KEY_RANDOMIZE_HASH - * There are some things, pointers for example * which don't hash well because they do not use * the lower bits. If this flag is set then the * hash table will attempt to rectify this by * randomising the bits and then using the upper * N bits as the index into the table. + * TCL_HASH_KEY_SYSTEM_HASH - If this flag is set then all memory internally + * allocated for the hash table that is not for an + * entry will use the system heap. */ + #define TCL_HASH_KEY_RANDOMIZE_HASH 0x1 +#define TCL_HASH_KEY_SYSTEM_HASH 0x2 /* - * Structure definition for the methods associated with a hash table - * key type. + * Structure definition for the methods associated with a hash table key type. */ + #define TCL_HASH_KEY_TYPE_VERSION 1 struct Tcl_HashKeyType { int version; /* Version of the table. If this structure is * extended in future then the version can be * used to distinguish between different - * structures. - */ - + * structures. */ int flags; /* Flags, see above for details. */ - - /* Calculates a hash value for the key. If this is NULL then the pointer - * itself is used as a hash value. - */ Tcl_HashKeyProc *hashKeyProc; - - /* Compares two keys and returns zero if they do not match, and non-zero - * if they do. If this is NULL then the pointers are compared. - */ + /* Calculates a hash value for the key. If + * this is NULL then the pointer itself is + * used as a hash value. */ Tcl_CompareHashKeysProc *compareKeysProc; - - /* Called to allocate memory for a new entry, i.e. if the key is a - * string then this could allocate a single block which contains enough - * space for both the entry and the string. Only the key field of the - * allocated Tcl_HashEntry structure needs to be filled in. If something - * else needs to be done to the key, i.e. incrementing a reference count - * then that should be done by this function. If this is NULL then Tcl_Alloc - * is used to allocate enough space for a Tcl_HashEntry and the key pointer - * is assigned to key.oneWordValue. - */ + /* Compares two keys and returns zero if they + * do not match, and non-zero if they do. If + * this is NULL then the pointers are + * compared. */ Tcl_AllocHashEntryProc *allocEntryProc; - - /* Called to free memory associated with an entry. If something else needs - * to be done to the key, i.e. decrementing a reference count then that - * should be done by this function. If this is NULL then Tcl_Free is used - * to free the Tcl_HashEntry. - */ + /* Called to allocate memory for a new entry, + * i.e. if the key is a string then this could + * allocate a single block which contains + * enough space for both the entry and the + * string. Only the key field of the allocated + * Tcl_HashEntry structure needs to be filled + * in. If something else needs to be done to + * the key, i.e. incrementing a reference + * count then that should be done by this + * function. If this is NULL then Tcl_Alloc is + * used to allocate enough space for a + * Tcl_HashEntry and the key pointer is + * assigned to key.oneWordValue. */ Tcl_FreeHashEntryProc *freeEntryProc; + /* Called to free memory associated with an + * entry. If something else needs to be done + * to the key, i.e. decrementing a reference + * count then that should be done by this + * function. If this is NULL then Tcl_Free is + * used to free the Tcl_HashEntry. */ }; /* - * Structure definition for a hash table. Must be in tcl.h so clients - * can allocate space for these structures, but clients should never - * access any fields in this structure. + * Structure definition for a hash table. Must be in tcl.h so clients can + * allocate space for these structures, but clients should never access any + * fields in this structure. */ #define TCL_SMALL_HASH_TABLE 4 struct Tcl_HashTable { - Tcl_HashEntry **buckets; /* Pointer to bucket array. Each - * element points to first entry in - * bucket's hash chain, or NULL. */ + Tcl_HashEntry **buckets; /* Pointer to bucket array. Each element + * points to first entry in bucket's hash + * chain, or NULL. */ Tcl_HashEntry *staticBuckets[TCL_SMALL_HASH_TABLE]; - /* Bucket array used for small tables - * (to avoid mallocs and frees). */ - int numBuckets; /* Total number of buckets allocated - * at **bucketPtr. */ - int numEntries; /* Total number of entries present - * in table. */ - int rebuildSize; /* Enlarge table when numEntries gets - * to be this large. */ - int downShift; /* Shift count used in hashing - * function. Designed to use high- - * order bits of randomized keys. */ - int mask; /* Mask value used in hashing - * function. */ - int keyType; /* Type of keys used in this table. - * It's either TCL_CUSTOM_KEYS, - * TCL_STRING_KEYS, TCL_ONE_WORD_KEYS, - * or an integer giving the number of - * ints that is the size of the key. - */ -#if TCL_PRESERVE_BINARY_COMPATABILITY + /* Bucket array used for small tables (to + * avoid mallocs and frees). */ + int numBuckets; /* Total number of buckets allocated at + * **bucketPtr. */ + int numEntries; /* Total number of entries present in + * table. */ + int rebuildSize; /* Enlarge table when numEntries gets to be + * this large. */ + int downShift; /* Shift count used in hashing function. + * Designed to use high-order bits of + * randomized keys. */ + int mask; /* Mask value used in hashing function. */ + int keyType; /* Type of keys used in this table. It's + * either TCL_CUSTOM_KEYS, TCL_STRING_KEYS, + * TCL_ONE_WORD_KEYS, or an integer giving the + * number of ints that is the size of the + * key. */ Tcl_HashEntry *(*findProc) _ANSI_ARGS_((Tcl_HashTable *tablePtr, CONST char *key)); Tcl_HashEntry *(*createProc) _ANSI_ARGS_((Tcl_HashTable *tablePtr, CONST char *key, int *newPtr)); -#endif - Tcl_HashKeyType *typePtr; /* Type of the keys used in the - * Tcl_HashTable. */ + Tcl_HashKeyType *typePtr; /* Type of the keys used in the + * Tcl_HashTable. */ }; /* - * Structure definition for information used to keep track of searches - * through hash tables: + * Structure definition for information used to keep track of searches through + * hash tables: */ typedef struct Tcl_HashSearch { - Tcl_HashTable *tablePtr; /* Table being searched. */ - int nextIndex; /* Index of next bucket to be - * enumerated after present one. */ - Tcl_HashEntry *nextEntryPtr; /* Next entry to be enumerated in the - * the current bucket. */ + Tcl_HashTable *tablePtr; /* Table being searched. */ + int nextIndex; /* Index of next bucket to be enumerated after + * present one. */ + Tcl_HashEntry *nextEntryPtr;/* Next entry to be enumerated in the current + * bucket. */ } Tcl_HashSearch; /* * Acceptable key types for hash tables: * - * TCL_STRING_KEYS: The keys are strings, they are copied into - * the entry. + * TCL_STRING_KEYS: The keys are strings, they are copied into the + * entry. * TCL_ONE_WORD_KEYS: The keys are pointers, the pointer is stored * in the entry. * TCL_CUSTOM_TYPE_KEYS: The keys are arbitrary types which are copied @@ -1328,69 +1264,39 @@ typedef struct Tcl_HashSearch { * TCL_CUSTOM_PTR_KEYS: The keys are pointers to arbitrary types, the * pointer is stored in the entry. * - * While maintaining binary compatability the above have to be distinct - * values as they are used to differentiate between old versions of the - * hash table which don't have a typePtr and new ones which do. Once binary - * compatability is discarded in favour of making more wide spread changes - * TCL_STRING_KEYS can be the same as TCL_CUSTOM_TYPE_KEYS, and - * TCL_ONE_WORD_KEYS can be the same as TCL_CUSTOM_PTR_KEYS because they - * simply determine how the key is accessed from the entry and not the - * behaviour. + * While maintaining binary compatability the above have to be distinct values + * as they are used to differentiate between old versions of the hash table + * which don't have a typePtr and new ones which do. Once binary compatability + * is discarded in favour of making more wide spread changes TCL_STRING_KEYS + * can be the same as TCL_CUSTOM_TYPE_KEYS, and TCL_ONE_WORD_KEYS can be the + * same as TCL_CUSTOM_PTR_KEYS because they simply determine how the key is + * accessed from the entry and not the behaviour. */ #define TCL_STRING_KEYS 0 #define TCL_ONE_WORD_KEYS 1 - -#if TCL_PRESERVE_BINARY_COMPATABILITY -# define TCL_CUSTOM_TYPE_KEYS -2 -# define TCL_CUSTOM_PTR_KEYS -1 -#else -# define TCL_CUSTOM_TYPE_KEYS TCL_STRING_KEYS -# define TCL_CUSTOM_PTR_KEYS TCL_ONE_WORD_KEYS -#endif +#define TCL_CUSTOM_TYPE_KEYS -2 +#define TCL_CUSTOM_PTR_KEYS -1 /* - * Macros for clients to use to access fields of hash entries: + * Structure definition for information used to keep track of searches through + * dictionaries. These fields should not be accessed by code outside + * tclDictObj.c */ -#define Tcl_GetHashValue(h) ((h)->clientData) -#define Tcl_SetHashValue(h, value) ((h)->clientData = (ClientData) (value)) -#if TCL_PRESERVE_BINARY_COMPATABILITY -# define Tcl_GetHashKey(tablePtr, h) \ - ((char *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS || \ - (tablePtr)->keyType == TCL_CUSTOM_PTR_KEYS) \ - ? (h)->key.oneWordValue \ - : (h)->key.string)) -#else -# define Tcl_GetHashKey(tablePtr, h) \ - ((char *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS) \ - ? (h)->key.oneWordValue \ - : (h)->key.string)) -#endif - -/* - * Macros to use for clients to use to invoke find and create procedures - * for hash tables: - */ +typedef struct { + void *next; /* Search position for underlying hash + * table. */ + int epoch; /* Epoch marker for dictionary being searched, + * or -1 if search has terminated. */ + Tcl_Dict dictionaryPtr; /* Reference to dictionary being searched. */ +} Tcl_DictSearch; -#if TCL_PRESERVE_BINARY_COMPATABILITY -# define Tcl_FindHashEntry(tablePtr, key) \ - (*((tablePtr)->findProc))(tablePtr, key) -# define Tcl_CreateHashEntry(tablePtr, key, newPtr) \ - (*((tablePtr)->createProc))(tablePtr, key, newPtr) -#else /* !TCL_PRESERVE_BINARY_COMPATABILITY */ /* - * Macro to use new extended version of Tcl_InitHashTable. + * Flag values to pass to Tcl_DoOneEvent to disable searches for some kinds of + * events: */ -# define Tcl_InitHashTable(tablePtr, keyType) \ - Tcl_InitHashTableEx(tablePtr, keyType, NULL) -#endif /* TCL_PRESERVE_BINARY_COMPATABILITY */ - -/* - * Flag values to pass to Tcl_DoOneEvent to disable searches - * for some kinds of events: - */ #define TCL_DONT_WAIT (1<<1) #define TCL_WINDOW_EVENTS (1<<2) #define TCL_FILE_EVENTS (1<<3) @@ -1399,17 +1305,16 @@ typedef struct Tcl_HashSearch { #define TCL_ALL_EVENTS (~TCL_DONT_WAIT) /* - * The following structure defines a generic event for the Tcl event - * system. These are the things that are queued in calls to Tcl_QueueEvent - * and serviced later by Tcl_DoOneEvent. There can be many different - * kinds of events with different fields, corresponding to window events, - * timer events, etc. The structure for a particular event consists of - * a Tcl_Event header followed by additional information specific to that - * event. + * The following structure defines a generic event for the Tcl event system. + * These are the things that are queued in calls to Tcl_QueueEvent and + * serviced later by Tcl_DoOneEvent. There can be many different kinds of + * events with different fields, corresponding to window events, timer events, + * etc. The structure for a particular event consists of a Tcl_Event header + * followed by additional information specific to that event. */ struct Tcl_Event { - Tcl_EventProc *proc; /* Procedure to call to service this event. */ + Tcl_EventProc *proc; /* Function to call to service this event. */ struct Tcl_Event *nextPtr; /* Next in list of pending events, or NULL. */ }; @@ -1430,10 +1335,9 @@ typedef enum { #define TCL_SERVICE_ALL 1 /* - * The following structure keeps is used to hold a time value, either as - * an absolute time (the number of seconds from the epoch) or as an - * elapsed time. On Unix systems the epoch is Midnight Jan 1, 1970 GMT. - * On Macintosh systems the epoch is Midnight Jan 1, 1904 GMT. + * The following structure keeps is used to hold a time value, either as an + * absolute time (the number of seconds from the epoch) or as an elapsed time. + * On Unix systems the epoch is Midnight Jan 1, 1970 GMT. */ typedef struct Tcl_Time { @@ -1445,20 +1349,30 @@ typedef void (Tcl_SetTimerProc) _ANSI_ARGS_((Tcl_Time *timePtr)); typedef int (Tcl_WaitForEventProc) _ANSI_ARGS_((Tcl_Time *timePtr)); /* - * Bits to pass to Tcl_CreateFileHandler and Tcl_CreateChannelHandler - * to indicate what sorts of events are of interest: + * TIP #233 (Virtualized Time) */ -#define TCL_READABLE (1<<1) -#define TCL_WRITABLE (1<<2) -#define TCL_EXCEPTION (1<<3) + +typedef void (Tcl_GetTimeProc) _ANSI_ARGS_((Tcl_Time *timebuf, + ClientData clientData)); +typedef void (Tcl_ScaleTimeProc) _ANSI_ARGS_((Tcl_Time *timebuf, + ClientData clientData)); + +/* + * Bits to pass to Tcl_CreateFileHandler and Tcl_CreateChannelHandler to + * indicate what sorts of events are of interest: + */ + +#define TCL_READABLE (1<<1) +#define TCL_WRITABLE (1<<2) +#define TCL_EXCEPTION (1<<3) /* - * Flag values to pass to Tcl_OpenCommandChannel to indicate the - * disposition of the stdio handles. TCL_STDIN, TCL_STDOUT, TCL_STDERR, - * are also used in Tcl_GetStdChannel. + * Flag values to pass to Tcl_OpenCommandChannel to indicate the disposition + * of the stdio handles. TCL_STDIN, TCL_STDOUT, TCL_STDERR, are also used in + * Tcl_GetStdChannel. */ -#define TCL_STDIN (1<<1) +#define TCL_STDIN (1<<1) #define TCL_STDOUT (1<<2) #define TCL_STDERR (1<<3) #define TCL_ENFORCE_MODE (1<<4) @@ -1467,27 +1381,29 @@ typedef int (Tcl_WaitForEventProc) _ANSI_ARGS_((Tcl_Time *timePtr)); * Bits passed to Tcl_DriverClose2Proc to indicate which side of a channel * should be closed. */ -#define TCL_CLOSE_READ (1<<1) -#define TCL_CLOSE_WRITE (1<<2) + +#define TCL_CLOSE_READ (1<<1) +#define TCL_CLOSE_WRITE (1<<2) /* - * Value to use as the closeProc for a channel that supports the - * close2Proc interface. + * Value to use as the closeProc for a channel that supports the close2Proc + * interface. */ -#define TCL_CLOSE2PROC ((Tcl_DriverCloseProc *)1) +#define TCL_CLOSE2PROC ((Tcl_DriverCloseProc *) 1) /* - * Channel version tag. This was introduced in 8.3.2/8.4. + * Channel version tag. This was introduced in 8.3.2/8.4. */ #define TCL_CHANNEL_VERSION_1 ((Tcl_ChannelTypeVersion) 0x1) #define TCL_CHANNEL_VERSION_2 ((Tcl_ChannelTypeVersion) 0x2) #define TCL_CHANNEL_VERSION_3 ((Tcl_ChannelTypeVersion) 0x3) #define TCL_CHANNEL_VERSION_4 ((Tcl_ChannelTypeVersion) 0x4) +#define TCL_CHANNEL_VERSION_5 ((Tcl_ChannelTypeVersion) 0x5) /* - * TIP #218: Channel Actions, Ids for Tcl_DriverThreadActionProc + * TIP #218: Channel Actions, Ids for Tcl_DriverThreadActionProc. */ #define TCL_CHANNEL_THREAD_INSERT (0) @@ -1511,7 +1427,7 @@ typedef int (Tcl_DriverSeekProc) _ANSI_ARGS_((ClientData instanceData, long offset, int mode, int *errorCodePtr)); typedef int (Tcl_DriverSetOptionProc) _ANSI_ARGS_(( ClientData instanceData, Tcl_Interp *interp, - CONST char *optionName, CONST char *value)); + CONST char *optionName, CONST char *value)); typedef int (Tcl_DriverGetOptionProc) _ANSI_ARGS_(( ClientData instanceData, Tcl_Interp *interp, CONST84 char *optionName, Tcl_DString *dsPtr)); @@ -1520,125 +1436,111 @@ typedef void (Tcl_DriverWatchProc) _ANSI_ARGS_(( typedef int (Tcl_DriverGetHandleProc) _ANSI_ARGS_(( ClientData instanceData, int direction, ClientData *handlePtr)); -typedef int (Tcl_DriverFlushProc) _ANSI_ARGS_(( - ClientData instanceData)); +typedef int (Tcl_DriverFlushProc) _ANSI_ARGS_((ClientData instanceData)); typedef int (Tcl_DriverHandlerProc) _ANSI_ARGS_(( ClientData instanceData, int interestMask)); typedef Tcl_WideInt (Tcl_DriverWideSeekProc) _ANSI_ARGS_(( ClientData instanceData, Tcl_WideInt offset, int mode, int *errorCodePtr)); - - /* TIP #218, Channel Thread Actions */ -typedef void (Tcl_DriverThreadActionProc) _ANSI_ARGS_ (( - ClientData instanceData, int action)); - /* - * The following declarations either map ckalloc and ckfree to - * malloc and free, or they map them to procedures with all sorts - * of debugging hooks defined in tclCkalloc.c. + * TIP #218, Channel Thread Actions */ -#ifdef TCL_MEM_DEBUG - -# define ckalloc(x) Tcl_DbCkalloc(x, __FILE__, __LINE__) -# define ckfree(x) Tcl_DbCkfree(x, __FILE__, __LINE__) -# define ckrealloc(x,y) Tcl_DbCkrealloc((x), (y),__FILE__, __LINE__) -# define attemptckalloc(x) Tcl_AttemptDbCkalloc(x, __FILE__, __LINE__) -# define attemptckrealloc(x,y) Tcl_AttemptDbCkrealloc((x), (y), __FILE__, __LINE__) -#else /* !TCL_MEM_DEBUG */ - +typedef void (Tcl_DriverThreadActionProc) _ANSI_ARGS_ (( + ClientData instanceData, int action)); /* - * If we are not using the debugging allocator, we should call the - * Tcl_Alloc, et al. routines in order to guarantee that every module - * is using the same memory allocator both inside and outside of the - * Tcl library. + * TIP #208, File Truncation (etc.) */ -# define ckalloc(x) Tcl_Alloc(x) -# define ckfree(x) Tcl_Free(x) -# define ckrealloc(x,y) Tcl_Realloc(x,y) -# define attemptckalloc(x) Tcl_AttemptAlloc(x) -# define attemptckrealloc(x,y) Tcl_AttemptRealloc(x,y) -# define Tcl_InitMemory(x) -# define Tcl_DumpActiveMemory(x) -# define Tcl_ValidateAllMemory(x,y) - -#endif /* !TCL_MEM_DEBUG */ +typedef int (Tcl_DriverTruncateProc) _ANSI_ARGS_(( + ClientData instanceData, Tcl_WideInt length)); /* * struct Tcl_ChannelType: * - * One such structure exists for each type (kind) of channel. - * It collects together in one place all the functions that are - * part of the specific channel type. + * One such structure exists for each type (kind) of channel. It collects + * together in one place all the functions that are part of the specific + * channel type. * - * It is recommend that the Tcl_Channel* functions are used to access - * elements of this structure, instead of direct accessing. + * It is recommend that the Tcl_Channel* functions are used to access elements + * of this structure, instead of direct accessing. */ typedef struct Tcl_ChannelType { - char *typeName; /* The name of the channel type in Tcl - * commands. This storage is owned by - * channel type. */ - Tcl_ChannelTypeVersion version; /* Version of the channel type. */ - Tcl_DriverCloseProc *closeProc; /* Procedure to call to close the - * channel, or TCL_CLOSE2PROC if the - * close2Proc should be used - * instead. */ - Tcl_DriverInputProc *inputProc; /* Procedure to call for input - * on channel. */ - Tcl_DriverOutputProc *outputProc; /* Procedure to call for output - * on channel. */ - Tcl_DriverSeekProc *seekProc; /* Procedure to call to seek - * on the channel. May be NULL. */ + char *typeName; /* The name of the channel type in Tcl + * commands. This storage is owned by channel + * type. */ + Tcl_ChannelTypeVersion version; + /* Version of the channel type. */ + Tcl_DriverCloseProc *closeProc; + /* Function to call to close the channel, or + * TCL_CLOSE2PROC if the close2Proc should be + * used instead. */ + Tcl_DriverInputProc *inputProc; + /* Function to call for input on channel. */ + Tcl_DriverOutputProc *outputProc; + /* Function to call for output on channel. */ + Tcl_DriverSeekProc *seekProc; + /* Function to call to seek on the channel. + * May be NULL. */ Tcl_DriverSetOptionProc *setOptionProc; - /* Set an option on a channel. */ + /* Set an option on a channel. */ Tcl_DriverGetOptionProc *getOptionProc; - /* Get an option from a channel. */ - Tcl_DriverWatchProc *watchProc; /* Set up the notifier to watch - * for events on this channel. */ + /* Get an option from a channel. */ + Tcl_DriverWatchProc *watchProc; + /* Set up the notifier to watch for events on + * this channel. */ Tcl_DriverGetHandleProc *getHandleProc; - /* Get an OS handle from the channel - * or NULL if not supported. */ - Tcl_DriverClose2Proc *close2Proc; /* Procedure to call to close the - * channel if the device supports - * closing the read & write sides - * independently. */ + /* Get an OS handle from the channel or NULL + * if not supported. */ + Tcl_DriverClose2Proc *close2Proc; + /* Function to call to close the channel if + * the device supports closing the read & + * write sides independently. */ Tcl_DriverBlockModeProc *blockModeProc; - /* Set blocking mode for the - * raw channel. May be NULL. */ + /* Set blocking mode for the raw channel. May + * be NULL. */ /* - * Only valid in TCL_CHANNEL_VERSION_2 channels or later + * Only valid in TCL_CHANNEL_VERSION_2 channels or later. */ - Tcl_DriverFlushProc *flushProc; /* Procedure to call to flush a - * channel. May be NULL. */ - Tcl_DriverHandlerProc *handlerProc; /* Procedure to call to handle a - * channel event. This will be passed - * up the stacked channel chain. */ + Tcl_DriverFlushProc *flushProc; + /* Function to call to flush a channel. May be + * NULL. */ + Tcl_DriverHandlerProc *handlerProc; + /* Function to call to handle a channel event. + * This will be passed up the stacked channel + * chain. */ /* - * Only valid in TCL_CHANNEL_VERSION_3 channels or later + * Only valid in TCL_CHANNEL_VERSION_3 channels or later. */ Tcl_DriverWideSeekProc *wideSeekProc; - /* Procedure to call to seek - * on the channel which can - * handle 64-bit offsets. May be - * NULL, and must be NULL if - * seekProc is NULL. */ - - /* - * Only valid in TCL_CHANNEL_VERSION_4 channels or later - * TIP #218, Channel Thread Actions - */ - Tcl_DriverThreadActionProc *threadActionProc; - /* Procedure to call to notify - * the driver of thread specific - * activity for a channel. - * May be NULL. */ + /* Function to call to seek on the channel + * which can handle 64-bit offsets. May be + * NULL, and must be NULL if seekProc is + * NULL. */ + /* + * Only valid in TCL_CHANNEL_VERSION_4 channels or later. + * TIP #218, Channel Thread Actions. + */ + Tcl_DriverThreadActionProc *threadActionProc; + /* Function to call to notify the driver of + * thread specific activity for a channel. May + * be NULL. */ + + /* + * Only valid in TCL_CHANNEL_VERSION_5 channels or later. + * TIP #208, File Truncation. + */ + Tcl_DriverTruncateProc *truncateProc; + /* Function to call to truncate the underlying + * file to a particular length. May be NULL if + * the channel does not support truncation. */ } Tcl_ChannelType; /* - * The following flags determine whether the blockModeProc above should - * set the channel into blocking or nonblocking mode. They are passed - * as arguments to the blockModeProc procedure in the above structure. + * The following flags determine whether the blockModeProc above should set + * the channel into blocking or nonblocking mode. They are passed as arguments + * to the blockModeProc function in the above structure. */ + #define TCL_MODE_BLOCKING 0 /* Put channel into blocking mode. */ #define TCL_MODE_NONBLOCKING 1 /* Put channel into nonblocking * mode. */ @@ -1653,23 +1555,20 @@ typedef enum Tcl_PathType { TCL_PATH_VOLUME_RELATIVE } Tcl_PathType; -/* - * The following structure is used to pass glob type data amongst - * the various glob routines and Tcl_FSMatchInDirectory. +/* + * The following structure is used to pass glob type data amongst the various + * glob routines and Tcl_FSMatchInDirectory. */ + typedef struct Tcl_GlobTypeData { - /* Corresponds to bcdpfls as in 'find -t' */ - int type; - /* Corresponds to file permissions */ - int perm; - /* Acceptable mac type */ - Tcl_Obj* macType; - /* Acceptable mac creator */ - Tcl_Obj* macCreator; + int type; /* Corresponds to bcdpfls as in 'find -t'. */ + int perm; /* Corresponds to file permissions. */ + Tcl_Obj *macType; /* Acceptable Mac type. */ + Tcl_Obj *macCreator; /* Acceptable Mac creator. */ } Tcl_GlobTypeData; /* - * type and permission definitions for glob command + * Type and permission definitions for glob command. */ #define TCL_GLOB_TYPE_BLOCK (1<<0) @@ -1688,65 +1587,69 @@ typedef struct Tcl_GlobTypeData { #define TCL_GLOB_PERM_X (1<<4) /* + * Flags for the unload callback function. + */ + +#define TCL_UNLOAD_DETACH_FROM_INTERPRETER (1<<0) +#define TCL_UNLOAD_DETACH_FROM_PROCESS (1<<1) + +/* * Typedefs for the various filesystem operations: */ typedef int (Tcl_FSStatProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, Tcl_StatBuf *buf)); typedef int (Tcl_FSAccessProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, int mode)); -typedef Tcl_Channel (Tcl_FSOpenFileChannelProc) - _ANSI_ARGS_((Tcl_Interp *interp, Tcl_Obj *pathPtr, - int mode, int permissions)); -typedef int (Tcl_FSMatchInDirectoryProc) _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj *result, Tcl_Obj *pathPtr, CONST char *pattern, +typedef Tcl_Channel (Tcl_FSOpenFileChannelProc) _ANSI_ARGS_(( + Tcl_Interp *interp, Tcl_Obj *pathPtr, int mode, int permissions)); +typedef int (Tcl_FSMatchInDirectoryProc) _ANSI_ARGS_((Tcl_Interp *interp, + Tcl_Obj *result, Tcl_Obj *pathPtr, CONST char *pattern, Tcl_GlobTypeData * types)); -typedef Tcl_Obj* (Tcl_FSGetCwdProc) _ANSI_ARGS_((Tcl_Interp *interp)); +typedef Tcl_Obj * (Tcl_FSGetCwdProc) _ANSI_ARGS_((Tcl_Interp *interp)); typedef int (Tcl_FSChdirProc) _ANSI_ARGS_((Tcl_Obj *pathPtr)); -typedef int (Tcl_FSLstatProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, - Tcl_StatBuf *buf)); +typedef int (Tcl_FSLstatProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, + Tcl_StatBuf *buf)); typedef int (Tcl_FSCreateDirectoryProc) _ANSI_ARGS_((Tcl_Obj *pathPtr)); typedef int (Tcl_FSDeleteFileProc) _ANSI_ARGS_((Tcl_Obj *pathPtr)); typedef int (Tcl_FSCopyDirectoryProc) _ANSI_ARGS_((Tcl_Obj *srcPathPtr, - Tcl_Obj *destPathPtr, Tcl_Obj **errorPtr)); + Tcl_Obj *destPathPtr, Tcl_Obj **errorPtr)); typedef int (Tcl_FSCopyFileProc) _ANSI_ARGS_((Tcl_Obj *srcPathPtr, - Tcl_Obj *destPathPtr)); + Tcl_Obj *destPathPtr)); typedef int (Tcl_FSRemoveDirectoryProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, - int recursive, Tcl_Obj **errorPtr)); + int recursive, Tcl_Obj **errorPtr)); typedef int (Tcl_FSRenameFileProc) _ANSI_ARGS_((Tcl_Obj *srcPathPtr, - Tcl_Obj *destPathPtr)); + Tcl_Obj *destPathPtr)); typedef void (Tcl_FSUnloadFileProc) _ANSI_ARGS_((Tcl_LoadHandle loadHandle)); -typedef Tcl_Obj* (Tcl_FSListVolumesProc) _ANSI_ARGS_((void)); +typedef Tcl_Obj * (Tcl_FSListVolumesProc) _ANSI_ARGS_((void)); /* We have to declare the utime structure here. */ struct utimbuf; -typedef int (Tcl_FSUtimeProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, - struct utimbuf *tval)); -typedef int (Tcl_FSNormalizePathProc) _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *pathPtr, int nextCheckpoint)); +typedef int (Tcl_FSUtimeProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, + struct utimbuf *tval)); +typedef int (Tcl_FSNormalizePathProc) _ANSI_ARGS_((Tcl_Interp *interp, + Tcl_Obj *pathPtr, int nextCheckpoint)); typedef int (Tcl_FSFileAttrsGetProc) _ANSI_ARGS_((Tcl_Interp *interp, - int index, Tcl_Obj *pathPtr, - Tcl_Obj **objPtrRef)); -typedef CONST char** (Tcl_FSFileAttrStringsProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, - Tcl_Obj** objPtrRef)); + int index, Tcl_Obj *pathPtr, Tcl_Obj **objPtrRef)); +typedef CONST char ** (Tcl_FSFileAttrStringsProc) _ANSI_ARGS_(( + Tcl_Obj *pathPtr, Tcl_Obj **objPtrRef)); typedef int (Tcl_FSFileAttrsSetProc) _ANSI_ARGS_((Tcl_Interp *interp, - int index, Tcl_Obj *pathPtr, - Tcl_Obj *objPtr)); -typedef Tcl_Obj* (Tcl_FSLinkProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, - Tcl_Obj *toPtr, int linkType)); -typedef int (Tcl_FSLoadFileProc) _ANSI_ARGS_((Tcl_Interp * interp, - Tcl_Obj *pathPtr, - Tcl_LoadHandle *handlePtr, - Tcl_FSUnloadFileProc **unloadProcPtr)); -typedef int (Tcl_FSPathInFilesystemProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, - ClientData *clientDataPtr)); -typedef Tcl_Obj* (Tcl_FSFilesystemPathTypeProc) - _ANSI_ARGS_((Tcl_Obj *pathPtr)); -typedef Tcl_Obj* (Tcl_FSFilesystemSeparatorProc) - _ANSI_ARGS_((Tcl_Obj *pathPtr)); + int index, Tcl_Obj *pathPtr, Tcl_Obj *objPtr)); +typedef Tcl_Obj * (Tcl_FSLinkProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, + Tcl_Obj *toPtr, int linkType)); +typedef int (Tcl_FSLoadFileProc) _ANSI_ARGS_((Tcl_Interp * interp, + Tcl_Obj *pathPtr, Tcl_LoadHandle *handlePtr, + Tcl_FSUnloadFileProc **unloadProcPtr)); +typedef int (Tcl_FSPathInFilesystemProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, + ClientData *clientDataPtr)); +typedef Tcl_Obj * (Tcl_FSFilesystemPathTypeProc) _ANSI_ARGS_(( + Tcl_Obj *pathPtr)); +typedef Tcl_Obj * (Tcl_FSFilesystemSeparatorProc) _ANSI_ARGS_(( + Tcl_Obj *pathPtr)); typedef void (Tcl_FSFreeInternalRepProc) _ANSI_ARGS_((ClientData clientData)); -typedef ClientData (Tcl_FSDupInternalRepProc) - _ANSI_ARGS_((ClientData clientData)); -typedef Tcl_Obj* (Tcl_FSInternalToNormalizedProc) - _ANSI_ARGS_((ClientData clientData)); -typedef ClientData (Tcl_FSCreateInternalRepProc) _ANSI_ARGS_((Tcl_Obj *pathPtr)); +typedef ClientData (Tcl_FSDupInternalRepProc) _ANSI_ARGS_(( + ClientData clientData)); +typedef Tcl_Obj * (Tcl_FSInternalToNormalizedProc) _ANSI_ARGS_(( + ClientData clientData)); +typedef ClientData (Tcl_FSCreateInternalRepProc) _ANSI_ARGS_(( + Tcl_Obj *pathPtr)); typedef struct Tcl_FSVersion_ *Tcl_FSVersion; @@ -1764,207 +1667,181 @@ typedef struct Tcl_FSVersion_ *Tcl_FSVersion; /* * struct Tcl_Filesystem: * - * One such structure exists for each type (kind) of filesystem. - * It collects together in one place all the functions that are - * part of the specific filesystem. Tcl always accesses the - * filesystem through one of these structures. - * - * Not all entries need be non-NULL; any which are NULL are simply - * ignored. However, a complete filesystem should provide all of - * these functions. The explanations in the structure show - * the importance of each function. + * One such structure exists for each type (kind) of filesystem. It collects + * together in one place all the functions that are part of the specific + * filesystem. Tcl always accesses the filesystem through one of these + * structures. + * + * Not all entries need be non-NULL; any which are NULL are simply ignored. + * However, a complete filesystem should provide all of these functions. The + * explanations in the structure show the importance of each function. */ typedef struct Tcl_Filesystem { - CONST char *typeName; /* The name of the filesystem. */ - int structureLength; /* Length of this structure, so future - * binary compatibility can be assured. */ - Tcl_FSVersion version; - /* Version of the filesystem type. */ + CONST char *typeName; /* The name of the filesystem. */ + int structureLength; /* Length of this structure, so future binary + * compatibility can be assured. */ + Tcl_FSVersion version; /* Version of the filesystem type. */ Tcl_FSPathInFilesystemProc *pathInFilesystemProc; - /* Function to check whether a path is in - * this filesystem. This is the most - * important filesystem procedure. */ + /* Function to check whether a path is in this + * filesystem. This is the most important + * filesystem function. */ Tcl_FSDupInternalRepProc *dupInternalRepProc; - /* Function to duplicate internal fs rep. May - * be NULL (but then fs is less efficient). */ + /* Function to duplicate internal fs rep. May + * be NULL (but then fs is less efficient). */ Tcl_FSFreeInternalRepProc *freeInternalRepProc; - /* Function to free internal fs rep. Must - * be implemented, if internal representations - * need freeing, otherwise it can be NULL. */ + /* Function to free internal fs rep. Must be + * implemented if internal representations + * need freeing, otherwise it can be NULL. */ Tcl_FSInternalToNormalizedProc *internalToNormalizedProc; - /* Function to convert internal representation - * to a normalized path. Only required if - * the fs creates pure path objects with no - * string/path representation. */ + /* Function to convert internal representation + * to a normalized path. Only required if the + * fs creates pure path objects with no + * string/path representation. */ Tcl_FSCreateInternalRepProc *createInternalRepProc; - /* Function to create a filesystem-specific - * internal representation. May be NULL - * if paths have no internal representation, - * or if the Tcl_FSPathInFilesystemProc - * for this filesystem always immediately - * creates an internal representation for - * paths it accepts. */ - Tcl_FSNormalizePathProc *normalizePathProc; - /* Function to normalize a path. Should - * be implemented for all filesystems - * which can have multiple string - * representations for the same path - * object. */ + /* Function to create a filesystem-specific + * internal representation. May be NULL if + * paths have no internal representation, or + * if the Tcl_FSPathInFilesystemProc for this + * filesystem always immediately creates an + * internal representation for paths it + * accepts. */ + Tcl_FSNormalizePathProc *normalizePathProc; + /* Function to normalize a path. Should be + * implemented for all filesystems which can + * have multiple string representations for + * the same path object. */ Tcl_FSFilesystemPathTypeProc *filesystemPathTypeProc; - /* Function to determine the type of a - * path in this filesystem. May be NULL. */ + /* Function to determine the type of a path in + * this filesystem. May be NULL. */ Tcl_FSFilesystemSeparatorProc *filesystemSeparatorProc; - /* Function to return the separator - * character(s) for this filesystem. Must - * be implemented. */ - Tcl_FSStatProc *statProc; - /* - * Function to process a 'Tcl_FSStat()' - * call. Must be implemented for any - * reasonable filesystem. - */ - Tcl_FSAccessProc *accessProc; - /* - * Function to process a 'Tcl_FSAccess()' - * call. Must be implemented for any - * reasonable filesystem. - */ - Tcl_FSOpenFileChannelProc *openFileChannelProc; - /* - * Function to process a - * 'Tcl_FSOpenFileChannel()' call. Must be - * implemented for any reasonable - * filesystem. - */ - Tcl_FSMatchInDirectoryProc *matchInDirectoryProc; - /* Function to process a - * 'Tcl_FSMatchInDirectory()'. If not - * implemented, then glob and recursive - * copy functionality will be lacking in - * the filesystem. */ - Tcl_FSUtimeProc *utimeProc; - /* Function to process a - * 'Tcl_FSUtime()' call. Required to - * allow setting (not reading) of times - * with 'file mtime', 'file atime' and - * the open-r/open-w/fcopy implementation - * of 'file copy'. */ - Tcl_FSLinkProc *linkProc; - /* Function to process a - * 'Tcl_FSLink()' call. Should be - * implemented only if the filesystem supports - * links (reading or creating). */ - Tcl_FSListVolumesProc *listVolumesProc; - /* Function to list any filesystem volumes - * added by this filesystem. Should be - * implemented only if the filesystem adds - * volumes at the head of the filesystem. */ + /* Function to return the separator + * character(s) for this filesystem. Must be + * implemented. */ + Tcl_FSStatProc *statProc; /* Function to process a 'Tcl_FSStat()' call. + * Must be implemented for any reasonable + * filesystem. */ + Tcl_FSAccessProc *accessProc; + /* Function to process a 'Tcl_FSAccess()' + * call. Must be implemented for any + * reasonable filesystem. */ + Tcl_FSOpenFileChannelProc *openFileChannelProc; + /* Function to process a + * 'Tcl_FSOpenFileChannel()' call. Must be + * implemented for any reasonable + * filesystem. */ + Tcl_FSMatchInDirectoryProc *matchInDirectoryProc; + /* Function to process a + * 'Tcl_FSMatchInDirectory()'. If not + * implemented, then glob and recursive copy + * functionality will be lacking in the + * filesystem. */ + Tcl_FSUtimeProc *utimeProc; /* Function to process a 'Tcl_FSUtime()' call. + * Required to allow setting (not reading) of + * times with 'file mtime', 'file atime' and + * the open-r/open-w/fcopy implementation of + * 'file copy'. */ + Tcl_FSLinkProc *linkProc; /* Function to process a 'Tcl_FSLink()' call. + * Should be implemented only if the + * filesystem supports links (reading or + * creating). */ + Tcl_FSListVolumesProc *listVolumesProc; + /* Function to list any filesystem volumes + * added by this filesystem. Should be + * implemented only if the filesystem adds + * volumes at the head of the filesystem. */ Tcl_FSFileAttrStringsProc *fileAttrStringsProc; - /* Function to list all attributes strings - * which are valid for this filesystem. - * If not implemented the filesystem will - * not support the 'file attributes' command. - * This allows arbitrary additional information - * to be attached to files in the filesystem. */ + /* Function to list all attributes strings + * which are valid for this filesystem. If not + * implemented the filesystem will not support + * the 'file attributes' command. This allows + * arbitrary additional information to be + * attached to files in the filesystem. */ Tcl_FSFileAttrsGetProc *fileAttrsGetProc; - /* Function to process a - * 'Tcl_FSFileAttrsGet()' call, used by - * 'file attributes'. */ + /* Function to process a + * 'Tcl_FSFileAttrsGet()' call, used by 'file + * attributes'. */ Tcl_FSFileAttrsSetProc *fileAttrsSetProc; - /* Function to process a - * 'Tcl_FSFileAttrsSet()' call, used by - * 'file attributes'. */ - Tcl_FSCreateDirectoryProc *createDirectoryProc; - /* Function to process a - * 'Tcl_FSCreateDirectory()' call. Should - * be implemented unless the FS is - * read-only. */ - Tcl_FSRemoveDirectoryProc *removeDirectoryProc; - /* Function to process a - * 'Tcl_FSRemoveDirectory()' call. Should - * be implemented unless the FS is - * read-only. */ - Tcl_FSDeleteFileProc *deleteFileProc; - /* Function to process a - * 'Tcl_FSDeleteFile()' call. Should - * be implemented unless the FS is - * read-only. */ - Tcl_FSCopyFileProc *copyFileProc; - /* Function to process a - * 'Tcl_FSCopyFile()' call. If not - * implemented Tcl will fall back - * on open-r, open-w and fcopy as - * a copying mechanism, for copying - * actions initiated in Tcl (not C). */ - Tcl_FSRenameFileProc *renameFileProc; - /* Function to process a - * 'Tcl_FSRenameFile()' call. If not - * implemented, Tcl will fall back on - * a copy and delete mechanism, for - * rename actions initiated in Tcl (not C). */ - Tcl_FSCopyDirectoryProc *copyDirectoryProc; - /* Function to process a - * 'Tcl_FSCopyDirectory()' call. If - * not implemented, Tcl will fall back - * on a recursive create-dir, file copy - * mechanism, for copying actions - * initiated in Tcl (not C). */ - Tcl_FSLstatProc *lstatProc; - /* Function to process a - * 'Tcl_FSLstat()' call. If not implemented, - * Tcl will attempt to use the 'statProc' - * defined above instead. */ - Tcl_FSLoadFileProc *loadFileProc; - /* Function to process a - * 'Tcl_FSLoadFile()' call. If not - * implemented, Tcl will fall back on - * a copy to native-temp followed by a - * Tcl_FSLoadFile on that temporary copy. */ - Tcl_FSGetCwdProc *getCwdProc; - /* - * Function to process a 'Tcl_FSGetCwd()' - * call. Most filesystems need not - * implement this. It will usually only be - * called once, if 'getcwd' is called - * before 'chdir'. May be NULL. - */ - Tcl_FSChdirProc *chdirProc; - /* - * Function to process a 'Tcl_FSChdir()' - * call. If filesystems do not implement - * this, it will be emulated by a series of - * directory access checks. Otherwise, - * virtual filesystems which do implement - * it need only respond with a positive - * return result if the dirName is a valid - * directory in their filesystem. They - * need not remember the result, since that - * will be automatically remembered for use - * by GetCwd. Real filesystems should - * carry out the correct action (i.e. call - * the correct system 'chdir' api). If not - * implemented, then 'cd' and 'pwd' will - * fail inside the filesystem. - */ + /* Function to process a + * 'Tcl_FSFileAttrsSet()' call, used by 'file + * attributes'. */ + Tcl_FSCreateDirectoryProc *createDirectoryProc; + /* Function to process a + * 'Tcl_FSCreateDirectory()' call. Should be + * implemented unless the FS is read-only. */ + Tcl_FSRemoveDirectoryProc *removeDirectoryProc; + /* Function to process a + * 'Tcl_FSRemoveDirectory()' call. Should be + * implemented unless the FS is read-only. */ + Tcl_FSDeleteFileProc *deleteFileProc; + /* Function to process a 'Tcl_FSDeleteFile()' + * call. Should be implemented unless the FS + * is read-only. */ + Tcl_FSCopyFileProc *copyFileProc; + /* Function to process a 'Tcl_FSCopyFile()' + * call. If not implemented Tcl will fall back + * on open-r, open-w and fcopy as a copying + * mechanism, for copying actions initiated in + * Tcl (not C). */ + Tcl_FSRenameFileProc *renameFileProc; + /* Function to process a 'Tcl_FSRenameFile()' + * call. If not implemented, Tcl will fall + * back on a copy and delete mechanism, for + * rename actions initiated in Tcl (not C). */ + Tcl_FSCopyDirectoryProc *copyDirectoryProc; + /* Function to process a + * 'Tcl_FSCopyDirectory()' call. If not + * implemented, Tcl will fall back on a + * recursive create-dir, file copy mechanism, + * for copying actions initiated in Tcl (not + * C). */ + Tcl_FSLstatProc *lstatProc; /* Function to process a 'Tcl_FSLstat()' call. + * If not implemented, Tcl will attempt to use + * the 'statProc' defined above instead. */ + Tcl_FSLoadFileProc *loadFileProc; + /* Function to process a 'Tcl_FSLoadFile()' + * call. If not implemented, Tcl will fall + * back on a copy to native-temp followed by a + * Tcl_FSLoadFile on that temporary copy. */ + Tcl_FSGetCwdProc *getCwdProc; + /* Function to process a 'Tcl_FSGetCwd()' + * call. Most filesystems need not implement + * this. It will usually only be called once, + * if 'getcwd' is called before 'chdir'. May + * be NULL. */ + Tcl_FSChdirProc *chdirProc; /* Function to process a 'Tcl_FSChdir()' call. + * If filesystems do not implement this, it + * will be emulated by a series of directory + * access checks. Otherwise, virtual + * filesystems which do implement it need only + * respond with a positive return result if + * the dirName is a valid directory in their + * filesystem. They need not remember the + * result, since that will be automatically + * remembered for use by GetCwd. Real + * filesystems should carry out the correct + * action (i.e. call the correct system + * 'chdir' api). If not implemented, then 'cd' + * and 'pwd' will fail inside the + * filesystem. */ } Tcl_Filesystem; /* - * The following definitions are used as values for the 'linkAction' flag - * to Tcl_FSLink, or the linkProc of any filesystem. Any combination - * of flags can be given. For link creation, the linkProc should create - * a link which matches any of the types given. - * - * TCL_CREATE_SYMBOLIC_LINK: Create a symbolic or soft link. - * TCL_CREATE_HARD_LINK: Create a hard link. + * The following definitions are used as values for the 'linkAction' flag to + * Tcl_FSLink, or the linkProc of any filesystem. Any combination of flags can + * be given. For link creation, the linkProc should create a link which + * matches any of the types given. + * + * TCL_CREATE_SYMBOLIC_LINK - Create a symbolic or soft link. + * TCL_CREATE_HARD_LINK - Create a hard link. */ -#define TCL_CREATE_SYMBOLIC_LINK 0x01 -#define TCL_CREATE_HARD_LINK 0x02 +#define TCL_CREATE_SYMBOLIC_LINK 0x01 +#define TCL_CREATE_HARD_LINK 0x02 /* - * The following structure represents the Notifier functions that - * you can override with the Tcl_SetNotifier call. + * The following structure represents the Notifier functions that you can + * override with the Tcl_SetNotifier call. */ typedef struct Tcl_NotifierProcs { @@ -1979,163 +1856,159 @@ typedef struct Tcl_NotifierProcs { } Tcl_NotifierProcs; /* - * The following structure represents a user-defined encoding. It collects + * The following structure represents a user-defined encoding. It collects * together all the functions that are used by the specific encoding. */ typedef struct Tcl_EncodingType { - CONST char *encodingName; /* The name of the encoding, e.g. "euc-jp". + CONST char *encodingName; /* The name of the encoding, e.g. "euc-jp". * This name is the unique key for this * encoding type. */ Tcl_EncodingConvertProc *toUtfProc; - /* Procedure to convert from external - * encoding into UTF-8. */ + /* Function to convert from external encoding + * into UTF-8. */ Tcl_EncodingConvertProc *fromUtfProc; - /* Procedure to convert from UTF-8 into + /* Function to convert from UTF-8 into * external encoding. */ Tcl_EncodingFreeProc *freeProc; - /* If non-NULL, procedure to call when this + /* If non-NULL, function to call when this * encoding is deleted. */ ClientData clientData; /* Arbitrary value associated with encoding - * type. Passed to conversion procedures. */ + * type. Passed to conversion functions. */ int nullSize; /* Number of zero bytes that signify - * end-of-string in this encoding. This - * number is used to determine the source - * string length when the srcLen argument is - * negative. Must be 1 or 2. */ -} Tcl_EncodingType; + * end-of-string in this encoding. This number + * is used to determine the source string + * length when the srcLen argument is + * negative. Must be 1 or 2. */ +} Tcl_EncodingType; /* * The following definitions are used as values for the conversion control * flags argument when converting text from one character set to another: * - * TCL_ENCODING_START: Signifies that the source buffer is the first + * TCL_ENCODING_START - Signifies that the source buffer is the first * block in a (potentially multi-block) input - * stream. Tells the conversion procedure to - * reset to an initial state and perform any + * stream. Tells the conversion function to reset + * to an initial state and perform any * initialization that needs to occur before the - * first byte is converted. If the source - * buffer contains the entire input stream to be + * first byte is converted. If the source buffer + * contains the entire input stream to be * converted, this flag should be set. - * - * TCL_ENCODING_END: Signifies that the source buffer is the last + * TCL_ENCODING_END - Signifies that the source buffer is the last * block in a (potentially multi-block) input - * stream. Tells the conversion routine to + * stream. Tells the conversion routine to * perform any finalization that needs to occur * after the last byte is converted and then to - * reset to an initial state. If the source + * reset to an initial state. If the source * buffer contains the entire input stream to be * converted, this flag should be set. - * - * TCL_ENCODING_STOPONERROR: If set, then the converter will return - * immediately upon encountering an invalid - * byte sequence or a source character that has - * no mapping in the target encoding. If clear, - * then the converter will skip the problem, - * substituting one or more "close" characters - * in the destination buffer and then continue - * to sonvert the source. + * TCL_ENCODING_STOPONERROR - If set, then the converter will return + * immediately upon encountering an invalid byte + * sequence or a source character that has no + * mapping in the target encoding. If clear, then + * the converter will skip the problem, + * substituting one or more "close" characters in + * the destination buffer and then continue to + * convert the source. */ + #define TCL_ENCODING_START 0x01 #define TCL_ENCODING_END 0x02 #define TCL_ENCODING_STOPONERROR 0x04 /* - * The following data structures and declarations are for the new Tcl - * parser. + * The following data structures and declarations are for the new Tcl parser. */ /* - * For each word of a command, and for each piece of a word such as a - * variable reference, one of the following structures is created to - * describe the token. + * For each word of a command, and for each piece of a word such as a variable + * reference, one of the following structures is created to describe the + * token. */ typedef struct Tcl_Token { - int type; /* Type of token, such as TCL_TOKEN_WORD; - * see below for valid types. */ + int type; /* Type of token, such as TCL_TOKEN_WORD; see + * below for valid types. */ CONST char *start; /* First character in token. */ int size; /* Number of bytes in token. */ - int numComponents; /* If this token is composed of other - * tokens, this field tells how many of - * them there are (including components of - * components, etc.). The component tokens - * immediately follow this one. */ + int numComponents; /* If this token is composed of other tokens, + * this field tells how many of them there are + * (including components of components, etc.). + * The component tokens immediately follow + * this one. */ } Tcl_Token; /* - * Type values defined for Tcl_Token structures. These values are - * defined as mask bits so that it's easy to check for collections of - * types. + * Type values defined for Tcl_Token structures. These values are defined as + * mask bits so that it's easy to check for collections of types. * * TCL_TOKEN_WORD - The token describes one word of a command, - * from the first non-blank character of - * the word (which may be " or {) up to but - * not including the space, semicolon, or - * bracket that terminates the word. - * NumComponents counts the total number of - * sub-tokens that make up the word. This - * includes, for example, sub-tokens of - * TCL_TOKEN_VARIABLE tokens. - * TCL_TOKEN_SIMPLE_WORD - This token is just like TCL_TOKEN_WORD - * except that the word is guaranteed to - * consist of a single TCL_TOKEN_TEXT - * sub-token. - * TCL_TOKEN_TEXT - The token describes a range of literal - * text that is part of a word. - * NumComponents is always 0. - * TCL_TOKEN_BS - The token describes a backslash sequence - * that must be collapsed. NumComponents - * is always 0. + * from the first non-blank character of the word + * (which may be " or {) up to but not including + * the space, semicolon, or bracket that + * terminates the word. NumComponents counts the + * total number of sub-tokens that make up the + * word. This includes, for example, sub-tokens + * of TCL_TOKEN_VARIABLE tokens. + * TCL_TOKEN_SIMPLE_WORD - This token is just like TCL_TOKEN_WORD except + * that the word is guaranteed to consist of a + * single TCL_TOKEN_TEXT sub-token. + * TCL_TOKEN_TEXT - The token describes a range of literal text + * that is part of a word. NumComponents is + * always 0. + * TCL_TOKEN_BS - The token describes a backslash sequence that + * must be collapsed. NumComponents is always 0. * TCL_TOKEN_COMMAND - The token describes a command whose result - * must be substituted into the word. The - * token includes the enclosing brackets. - * NumComponents is always 0. - * TCL_TOKEN_VARIABLE - The token describes a variable - * substitution, including the dollar sign, - * variable name, and array index (if there - * is one) up through the right - * parentheses. NumComponents tells how - * many additional tokens follow to - * represent the variable name. The first - * token will be a TCL_TOKEN_TEXT token - * that describes the variable name. If - * the variable is an array reference then - * there will be one or more additional - * tokens, of type TCL_TOKEN_TEXT, + * must be substituted into the word. The token + * includes the enclosing brackets. NumComponents + * is always 0. + * TCL_TOKEN_VARIABLE - The token describes a variable substitution, + * including the dollar sign, variable name, and + * array index (if there is one) up through the + * right parentheses. NumComponents tells how + * many additional tokens follow to represent the + * variable name. The first token will be a + * TCL_TOKEN_TEXT token that describes the + * variable name. If the variable is an array + * reference then there will be one or more + * additional tokens, of type TCL_TOKEN_TEXT, * TCL_TOKEN_BS, TCL_TOKEN_COMMAND, and - * TCL_TOKEN_VARIABLE, that describe the - * array index; numComponents counts the - * total number of nested tokens that make - * up the variable reference, including - * sub-tokens of TCL_TOKEN_VARIABLE tokens. - * TCL_TOKEN_SUB_EXPR - The token describes one subexpression of a - * expression, from the first non-blank - * character of the subexpression up to but not - * including the space, brace, or bracket - * that terminates the subexpression. - * NumComponents counts the total number of - * following subtokens that make up the - * subexpression; this includes all subtokens - * for any nested TCL_TOKEN_SUB_EXPR tokens. - * For example, a numeric value used as a + * TCL_TOKEN_VARIABLE, that describe the array + * index; numComponents counts the total number + * of nested tokens that make up the variable + * reference, including sub-tokens of + * TCL_TOKEN_VARIABLE tokens. + * TCL_TOKEN_SUB_EXPR - The token describes one subexpression of an + * expression, from the first non-blank character + * of the subexpression up to but not including + * the space, brace, or bracket that terminates + * the subexpression. NumComponents counts the + * total number of following subtokens that make + * up the subexpression; this includes all + * subtokens for any nested TCL_TOKEN_SUB_EXPR + * tokens. For example, a numeric value used as a * primitive operand is described by a * TCL_TOKEN_SUB_EXPR token followed by a * TCL_TOKEN_TEXT token. A binary subexpression * is described by a TCL_TOKEN_SUB_EXPR token - * followed by the TCL_TOKEN_OPERATOR token - * for the operator, then TCL_TOKEN_SUB_EXPR - * tokens for the left then the right operands. + * followed by the TCL_TOKEN_OPERATOR token for + * the operator, then TCL_TOKEN_SUB_EXPR tokens + * for the left then the right operands. * TCL_TOKEN_OPERATOR - The token describes one expression operator. * An operator might be the name of a math * function such as "abs". A TCL_TOKEN_OPERATOR * token is always preceeded by one * TCL_TOKEN_SUB_EXPR token for the operator's - * subexpression, and is followed by zero or - * more TCL_TOKEN_SUB_EXPR tokens for the - * operator's operands. NumComponents is - * always 0. + * subexpression, and is followed by zero or more + * TCL_TOKEN_SUB_EXPR tokens for the operator's + * operands. NumComponents is always 0. + * TCL_TOKEN_EXPAND_WORD - This token is just like TCL_TOKEN_WORD except + * that it marks a word that began with the + * literal character prefix "{*}". This word is + * marked to be expanded - that is, broken into + * words after substitution is complete. */ + #define TCL_TOKEN_WORD 1 #define TCL_TOKEN_SIMPLE_WORD 2 #define TCL_TOKEN_TEXT 4 @@ -2144,11 +2017,11 @@ typedef struct Tcl_Token { #define TCL_TOKEN_VARIABLE 32 #define TCL_TOKEN_SUB_EXPR 64 #define TCL_TOKEN_OPERATOR 128 +#define TCL_TOKEN_EXPAND_WORD 256 /* - * Parsing error types. On any parsing error, one of these values - * will be stored in the error field of the Tcl_Parse structure - * defined below. + * Parsing error types. On any parsing error, one of these values will be + * stored in the error field of the Tcl_Parse structure defined below. */ #define TCL_PARSE_SUCCESS 0 @@ -2163,32 +2036,32 @@ typedef struct Tcl_Token { #define TCL_PARSE_BAD_NUMBER 9 /* - * A structure of the following type is filled in by Tcl_ParseCommand. - * It describes a single command parsed from an input string. + * A structure of the following type is filled in by Tcl_ParseCommand. It + * describes a single command parsed from an input string. */ #define NUM_STATIC_TOKENS 20 typedef struct Tcl_Parse { - CONST char *commentStart; /* Pointer to # that begins the first of - * one or more comments preceding the - * command. */ + CONST char *commentStart; /* Pointer to # that begins the first of one + * or more comments preceding the command. */ int commentSize; /* Number of bytes in comments (up through - * newline character that terminates the - * last comment). If there were no - * comments, this field is 0. */ - CONST char *commandStart; /* First character in first word of command. */ - int commandSize; /* Number of bytes in command, including - * first character of first word, up - * through the terminating newline, - * close bracket, or semicolon. */ - int numWords; /* Total number of words in command. May - * be 0. */ - Tcl_Token *tokenPtr; /* Pointer to first token representing - * the words of the command. Initially - * points to staticTokens, but may change - * to point to malloc-ed space if command - * exceeds space in staticTokens. */ + * newline character that terminates the last + * comment). If there were no comments, this + * field is 0. */ + CONST char *commandStart; /* First character in first word of + * command. */ + int commandSize; /* Number of bytes in command, including first + * character of first word, up through the + * terminating newline, close bracket, or + * semicolon. */ + int numWords; /* Total number of words in command. May be + * 0. */ + Tcl_Token *tokenPtr; /* Pointer to first token representing the + * words of the command. Initially points to + * staticTokens, but may change to point to + * malloc-ed space if command exceeds space in + * staticTokens. */ int numTokens; /* Total number of tokens in command. */ int tokensAvailable; /* Total number of tokens available at * *tokenPtr. */ @@ -2196,81 +2069,75 @@ typedef struct Tcl_Parse { * above. */ /* - * The fields below are intended only for the private use of the - * parser. They should not be used by procedures that invoke - * Tcl_ParseCommand. + * The fields below are intended only for the private use of the parser. + * They should not be used by functions that invoke Tcl_ParseCommand. */ CONST char *string; /* The original command string passed to * Tcl_ParseCommand. */ - CONST char *end; /* Points to the character just after the - * last one in the command string. */ - Tcl_Interp *interp; /* Interpreter to use for error reporting, - * or NULL. */ + CONST char *end; /* Points to the character just after the last + * one in the command string. */ + Tcl_Interp *interp; /* Interpreter to use for error reporting, or + * NULL. */ CONST char *term; /* Points to character in string that - * terminated most recent token. Filled in - * by ParseTokens. If an error occurs, - * points to beginning of region where the - * error occurred (e.g. the open brace if - * the close brace is missing). */ + * terminated most recent token. Filled in by + * ParseTokens. If an error occurs, points to + * beginning of region where the error + * occurred (e.g. the open brace if the close + * brace is missing). */ int incomplete; /* This field is set to 1 by Tcl_ParseCommand * if the command appears to be incomplete. * This information is used by * Tcl_CommandComplete. */ Tcl_Token staticTokens[NUM_STATIC_TOKENS]; - /* Initial space for tokens for command. - * This space should be large enough to - * accommodate most commands; dynamic - * space is allocated for very large - * commands that don't fit here. */ + /* Initial space for tokens for command. This + * space should be large enough to accommodate + * most commands; dynamic space is allocated + * for very large commands that don't fit + * here. */ } Tcl_Parse; /* * The following definitions are the error codes returned by the conversion * routines: * - * TCL_OK: All characters were converted. - * - * TCL_CONVERT_NOSPACE: The output buffer would not have been large + * TCL_OK - All characters were converted. + * TCL_CONVERT_NOSPACE - The output buffer would not have been large * enough for all of the converted data; as many * characters as could fit were converted though. - * - * TCL_CONVERT_MULTIBYTE: The last few bytes in the source string were + * TCL_CONVERT_MULTIBYTE - The last few bytes in the source string were * the beginning of a multibyte sequence, but * more bytes were needed to complete this - * sequence. A subsequent call to the conversion + * sequence. A subsequent call to the conversion * routine should pass the beginning of this * unconverted sequence plus additional bytes - * from the source stream to properly convert - * the formerly split-up multibyte sequence. - * - * TCL_CONVERT_SYNTAX: The source stream contained an invalid - * character sequence. This may occur if the + * from the source stream to properly convert the + * formerly split-up multibyte sequence. + * TCL_CONVERT_SYNTAX - The source stream contained an invalid + * character sequence. This may occur if the * input stream has been damaged or if the input - * encoding method was misidentified. This error + * encoding method was misidentified. This error * is reported only if TCL_ENCODING_STOPONERROR * was specified. - * - * TCL_CONVERT_UNKNOWN: The source string contained a character - * that could not be represented in the target - * encoding. This error is reported only if + * TCL_CONVERT_UNKNOWN - The source string contained a character that + * could not be represented in the target + * encoding. This error is reported only if * TCL_ENCODING_STOPONERROR was specified. */ -#define TCL_CONVERT_MULTIBYTE -1 -#define TCL_CONVERT_SYNTAX -2 -#define TCL_CONVERT_UNKNOWN -3 -#define TCL_CONVERT_NOSPACE -4 +#define TCL_CONVERT_MULTIBYTE -1 +#define TCL_CONVERT_SYNTAX -2 +#define TCL_CONVERT_UNKNOWN -3 +#define TCL_CONVERT_NOSPACE -4 /* * The maximum number of bytes that are necessary to represent a single - * Unicode character in UTF-8. The valid values should be 3 or 6 (or - * perhaps 1 if we want to support a non-unicode enabled core). - * If 3, then Tcl_UniChar must be 2-bytes in size (UCS-2). (default) - * If 6, then Tcl_UniChar must be 4-bytes in size (UCS-4). - * At this time UCS-2 mode is the default and recommended mode. - * UCS-4 is experimental and not recommended. It works for the core, - * but most extensions expect UCS-2. + * Unicode character in UTF-8. The valid values should be 3 or 6 (or perhaps 1 + * if we want to support a non-unicode enabled core). If 3, then Tcl_UniChar + * must be 2-bytes in size (UCS-2) (the default). If 6, then Tcl_UniChar must + * be 4-bytes in size (UCS-4). At this time UCS-2 mode is the default and + * recommended mode. UCS-4 is experimental and not recommended. It works for + * the core, but most extensions expect UCS-2. */ #ifndef TCL_UTF_MAX @@ -2278,15 +2145,15 @@ typedef struct Tcl_Parse { #endif /* - * This represents a Unicode character. Any changes to this should - * also be reflected in regcustom.h. + * This represents a Unicode character. Any changes to this should also be + * reflected in regcustom.h. */ #if TCL_UTF_MAX > 4 /* - * unsigned int isn't 100% accurate as it should be a strict 4-byte - * value (perhaps wchar_t). 64-bit systems may have troubles. The - * size of this value must be reflected correctly in regcustom.h and + * unsigned int isn't 100% accurate as it should be a strict 4-byte value + * (perhaps wchar_t). 64-bit systems may have troubles. The size of this + * value must be reflected correctly in regcustom.h and * in tclEncoding.c. * XXX: Tcl is currently UCS-2 and planning UTF-16 for the Unicode * XXX: string rep that Tcl_UniChar represents. Changing the size @@ -2297,50 +2164,62 @@ typedef unsigned int Tcl_UniChar; typedef unsigned short Tcl_UniChar; #endif +/* + * TIP #59: The following structure is used in calls 'Tcl_RegisterConfig' to + * provide the system with the embedded configuration data. + */ + +typedef struct Tcl_Config { + CONST char *key; /* Configuration key to register. ASCII + * encoded, thus UTF-8. */ + CONST char *value; /* The value associated with the key. System + * encoding. */ +} Tcl_Config; /* - * Deprecated Tcl procedures: + * Flags for TIP#143 limits, detailing which limits are active in an + * interpreter. Used for Tcl_{Add,Remove}LimitHandler type argument. */ -#ifndef TCL_NO_DEPRECATED -# define Tcl_EvalObj(interp,objPtr) \ - Tcl_EvalObjEx((interp),(objPtr),0) -# define Tcl_GlobalEvalObj(interp,objPtr) \ - Tcl_EvalObjEx((interp),(objPtr),TCL_EVAL_GLOBAL) -#endif +#define TCL_LIMIT_COMMANDS 0x01 +#define TCL_LIMIT_TIME 0x02 /* - * These function have been renamed. The old names are deprecated, but we - * define these macros for backwards compatibilty. + * Structure containing information about a limit handler to be called when a + * command- or time-limit is exceeded by an interpreter. */ -#define Tcl_Ckalloc Tcl_Alloc -#define Tcl_Ckfree Tcl_Free -#define Tcl_Ckrealloc Tcl_Realloc -#define Tcl_Return Tcl_SetResult -#define Tcl_TildeSubst Tcl_TranslateFileName -#define panic Tcl_Panic -#define panicVA Tcl_PanicVA + +typedef void (Tcl_LimitHandlerProc) _ANSI_ARGS_((ClientData clientData, + Tcl_Interp *interp)); +typedef void (Tcl_LimitHandlerDeleteProc) _ANSI_ARGS_((ClientData clientData)); + +typedef struct mp_int mp_int; +#define MP_INT_DECLARED +typedef unsigned int mp_digit; +#define MP_DIGIT_DECLARED /* - * The following constant is used to test for older versions of Tcl - * in the stubs tables. + * The following constant is used to test for older versions of Tcl in the + * stubs tables. * * Jan Nijtman's plus patch uses 0xFCA1BACF, so we need to pick a different * value since the stubs tables don't match. */ -#define TCL_STUB_MAGIC ((int)0xFCA3BACF) +#define TCL_STUB_MAGIC ((int) 0xFCA3BACF) /* * The following function is required to be defined in all stubs aware - * extensions. The function is actually implemented in the stub - * library, not the main Tcl library, although there is a trivial - * implementation in the main library in case an extension is statically - * linked into an application. + * extensions. The function is actually implemented in the stub library, not + * the main Tcl library, although there is a trivial implementation in the + * main library in case an extension is statically linked into an application. */ EXTERN CONST char * Tcl_InitStubs _ANSI_ARGS_((Tcl_Interp *interp, CONST char *version, int exact)); +EXTERN CONST char * TclTomMathInitializeStubs _ANSI_ARGS_(( + Tcl_Interp *interp, CONST char *version, + int epoch, int revision)); #ifndef USE_TCL_STUBS @@ -2349,49 +2228,211 @@ EXTERN CONST char * Tcl_InitStubs _ANSI_ARGS_((Tcl_Interp *interp, */ #define Tcl_InitStubs(interp, version, exact) \ - Tcl_PkgRequire(interp, "Tcl", version, exact) + Tcl_PkgInitStubsCheck(interp, version, exact) #endif + /* + * TODO - tommath stubs export goes here! + */ + /* - * Include the public function declarations that are accessible via - * the stubs table. + * Public functions that are not accessible via the stubs table. + * Tcl_GetMemoryInfo is needed for AOLserver. [Bug 1868171] */ -#include "tclDecls.h" +EXTERN void Tcl_Main _ANSI_ARGS_((int argc, char **argv, + Tcl_AppInitProc *appInitProc)); +EXTERN CONST char * Tcl_PkgInitStubsCheck _ANSI_ARGS_((Tcl_Interp *interp, + CONST char *version, int exact)); +#if defined(TCL_THREADS) && defined(USE_THREAD_ALLOC) +EXTERN void Tcl_GetMemoryInfo _ANSI_ARGS_((Tcl_DString *dsPtr)); +#endif /* - * Include platform specific public function declarations that are - * accessible via the stubs table. + * Include the public function declarations that are accessible via the stubs + * table. */ +#include "tclDecls.h" + /* - * tclPlatDecls.h can't be included here on the Mac, as we need - * Mac specific headers to define the Mac types used in this file, - * but these Mac haders conflict with a number of tk types - * and thus can't be included in the globally read tcl.h - * This header was originally added here as a fix for bug 5241 - * (stub link error for symbols in TclPlatStubs table), as a work- - * around for the bug on the mac, tclMac.h is included immediately - * after tcl.h in the tcl precompiled header (with DLLEXPORT set). + * Include platform specific public function declarations that are accessible + * via the stubs table. */ -#if !defined(MAC_TCL) #include "tclPlatDecls.h" + +/* + * The following declarations either map ckalloc and ckfree to malloc and + * free, or they map them to functions with all sorts of debugging hooks + * defined in tclCkalloc.c. + */ + +#ifdef TCL_MEM_DEBUG + +# define ckalloc(x) Tcl_DbCkalloc(x, __FILE__, __LINE__) +# define ckfree(x) Tcl_DbCkfree(x, __FILE__, __LINE__) +# define ckrealloc(x,y) Tcl_DbCkrealloc((x), (y),__FILE__, __LINE__) +# define attemptckalloc(x) Tcl_AttemptDbCkalloc(x, __FILE__, __LINE__) +# define attemptckrealloc(x,y) Tcl_AttemptDbCkrealloc((x), (y), __FILE__, __LINE__) + +#else /* !TCL_MEM_DEBUG */ + +/* + * If we are not using the debugging allocator, we should call the Tcl_Alloc, + * et al. routines in order to guarantee that every module is using the same + * memory allocator both inside and outside of the Tcl library. + */ + +# define ckalloc(x) Tcl_Alloc(x) +# define ckfree(x) Tcl_Free(x) +# define ckrealloc(x,y) Tcl_Realloc(x,y) +# define attemptckalloc(x) Tcl_AttemptAlloc(x) +# define attemptckrealloc(x,y) Tcl_AttemptRealloc(x,y) +# undef Tcl_InitMemory +# define Tcl_InitMemory(x) +# undef Tcl_DumpActiveMemory +# define Tcl_DumpActiveMemory(x) +# undef Tcl_ValidateAllMemory +# define Tcl_ValidateAllMemory(x,y) + +#endif /* !TCL_MEM_DEBUG */ + +#ifdef TCL_MEM_DEBUG +# define Tcl_IncrRefCount(objPtr) \ + Tcl_DbIncrRefCount(objPtr, __FILE__, __LINE__) +# define Tcl_DecrRefCount(objPtr) \ + Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__) +# define Tcl_IsShared(objPtr) \ + Tcl_DbIsShared(objPtr, __FILE__, __LINE__) +#else +# define Tcl_IncrRefCount(objPtr) \ + ++(objPtr)->refCount + /* + * Use do/while0 idiom for optimum correctness without compiler warnings. + * http://c2.com/cgi/wiki?TrivialDoWhileLoop + */ +# define Tcl_DecrRefCount(objPtr) \ + do { if (--(objPtr)->refCount <= 0) TclFreeObj(objPtr); } while(0) +# define Tcl_IsShared(objPtr) \ + ((objPtr)->refCount > 1) #endif /* - * Public functions that are not accessible via the stubs table. + * Macros and definitions that help to debug the use of Tcl objects. When + * TCL_MEM_DEBUG is defined, the Tcl_New declarations are overridden to call + * debugging versions of the object creation functions. */ -EXTERN void Tcl_Main _ANSI_ARGS_((int argc, char **argv, - Tcl_AppInitProc *appInitProc)); +#ifdef TCL_MEM_DEBUG +# undef Tcl_NewBignumObj +# define Tcl_NewBignumObj(val) \ + Tcl_DbNewBignumObj(val, __FILE__, __LINE__) +# undef Tcl_NewBooleanObj +# define Tcl_NewBooleanObj(val) \ + Tcl_DbNewBooleanObj(val, __FILE__, __LINE__) +# undef Tcl_NewByteArrayObj +# define Tcl_NewByteArrayObj(bytes, len) \ + Tcl_DbNewByteArrayObj(bytes, len, __FILE__, __LINE__) +# undef Tcl_NewDoubleObj +# define Tcl_NewDoubleObj(val) \ + Tcl_DbNewDoubleObj(val, __FILE__, __LINE__) +# undef Tcl_NewIntObj +# define Tcl_NewIntObj(val) \ + Tcl_DbNewLongObj(val, __FILE__, __LINE__) +# undef Tcl_NewListObj +# define Tcl_NewListObj(objc, objv) \ + Tcl_DbNewListObj(objc, objv, __FILE__, __LINE__) +# undef Tcl_NewLongObj +# define Tcl_NewLongObj(val) \ + Tcl_DbNewLongObj(val, __FILE__, __LINE__) +# undef Tcl_NewObj +# define Tcl_NewObj() \ + Tcl_DbNewObj(__FILE__, __LINE__) +# undef Tcl_NewStringObj +# define Tcl_NewStringObj(bytes, len) \ + Tcl_DbNewStringObj(bytes, len, __FILE__, __LINE__) +# undef Tcl_NewWideIntObj +# define Tcl_NewWideIntObj(val) \ + Tcl_DbNewWideIntObj(val, __FILE__, __LINE__) +#endif /* TCL_MEM_DEBUG */ + +/* + * Macros for clients to use to access fields of hash entries: + */ + +#define Tcl_GetHashValue(h) ((h)->clientData) +#define Tcl_SetHashValue(h, value) ((h)->clientData = (ClientData) (value)) +#define Tcl_GetHashKey(tablePtr, h) \ + ((char *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS || \ + (tablePtr)->keyType == TCL_CUSTOM_PTR_KEYS) \ + ? (h)->key.oneWordValue \ + : (h)->key.string)) + +/* + * Macros to use for clients to use to invoke find and create functions for + * hash tables: + */ + +#undef Tcl_FindHashEntry +#define Tcl_FindHashEntry(tablePtr, key) \ + (*((tablePtr)->findProc))(tablePtr, key) +#undef Tcl_CreateHashEntry +#define Tcl_CreateHashEntry(tablePtr, key, newPtr) \ + (*((tablePtr)->createProc))(tablePtr, key, newPtr) + +/* + * Macros that eliminate the overhead of the thread synchronization functions + * when compiling without thread support. + */ + +#ifndef TCL_THREADS +#undef Tcl_MutexLock +#define Tcl_MutexLock(mutexPtr) +#undef Tcl_MutexUnlock +#define Tcl_MutexUnlock(mutexPtr) +#undef Tcl_MutexFinalize +#define Tcl_MutexFinalize(mutexPtr) +#undef Tcl_ConditionNotify +#define Tcl_ConditionNotify(condPtr) +#undef Tcl_ConditionWait +#define Tcl_ConditionWait(condPtr, mutexPtr, timePtr) +#undef Tcl_ConditionFinalize +#define Tcl_ConditionFinalize(condPtr) +#endif /* TCL_THREADS */ + +#ifndef TCL_NO_DEPRECATED + /* + * Deprecated Tcl functions: + */ + +# undef Tcl_EvalObj +# define Tcl_EvalObj(interp,objPtr) \ + Tcl_EvalObjEx((interp),(objPtr),0) +# undef Tcl_GlobalEvalObj +# define Tcl_GlobalEvalObj(interp,objPtr) \ + Tcl_EvalObjEx((interp),(objPtr),TCL_EVAL_GLOBAL) + + /* + * These function have been renamed. The old names are deprecated, but we + * define these macros for backwards compatibilty. + */ + +# define Tcl_Ckalloc Tcl_Alloc +# define Tcl_Ckfree Tcl_Free +# define Tcl_Ckrealloc Tcl_Realloc +# define Tcl_Return Tcl_SetResult +# define Tcl_TildeSubst Tcl_TranslateFileName +# define panic Tcl_Panic +# define panicVA Tcl_PanicVA +#endif /* - * Convenience declaration of Tcl_AppInit for backwards compatibility. - * This function is not *implemented* by the tcl library, so the storage - * class is neither DLLEXPORT nor DLLIMPORT + * Convenience declaration of Tcl_AppInit for backwards compatibility. This + * function is not *implemented* by the tcl library, so the storage class is + * neither DLLEXPORT nor DLLIMPORT. */ #undef TCL_STORAGE_CLASS |