summaryrefslogtreecommitdiffstats
path: root/generic/tclBinary.c
diff options
context:
space:
mode:
Diffstat (limited to 'generic/tclBinary.c')
-rw-r--r--generic/tclBinary.c261
1 files changed, 227 insertions, 34 deletions
diff --git a/generic/tclBinary.c b/generic/tclBinary.c
index 7625d39..58583f4 100644
--- a/generic/tclBinary.c
+++ b/generic/tclBinary.c
@@ -87,10 +87,13 @@ static int BinaryDecodeHex(ClientData clientData,
static int BinaryEncode64(ClientData clientData,
Tcl_Interp *interp,
int objc, Tcl_Obj *const objv[]);
-static int BinaryDecodeUu(ClientData clientData,
+static int BinaryDecode64(ClientData clientData,
Tcl_Interp *interp,
int objc, Tcl_Obj *const objv[]);
-static int BinaryDecode64(ClientData clientData,
+static int BinaryEncodeUu(ClientData clientData,
+ Tcl_Interp *interp, int objc,
+ Tcl_Obj *const objv[]);
+static int BinaryDecodeUu(ClientData clientData,
Tcl_Interp *interp,
int objc, Tcl_Obj *const objv[]);
@@ -139,9 +142,9 @@ static const EnsembleImplMap binaryMap[] = {
{ NULL, NULL, NULL, NULL, NULL, 0 }
};
static const EnsembleImplMap encodeMap[] = {
- { "hex", BinaryEncodeHex, TclCompileBasic1ArgCmd, NULL, (ClientData)HexDigits, 0 },
- { "uuencode", BinaryEncode64, NULL, NULL, (ClientData)UueDigits, 0 },
- { "base64", BinaryEncode64, NULL, NULL, (ClientData)B64Digits, 0 },
+ { "hex", BinaryEncodeHex, TclCompileBasic1ArgCmd, NULL, NULL, 0 },
+ { "uuencode", BinaryEncodeUu, NULL, NULL, NULL, 0 },
+ { "base64", BinaryEncode64, NULL, NULL, NULL, 0 },
{ NULL, NULL, NULL, NULL, NULL, 0 }
};
static const EnsembleImplMap decodeMap[] = {
@@ -2312,7 +2315,6 @@ BinaryEncodeHex(
Tcl_Obj *resultObj = NULL;
unsigned char *data = NULL;
unsigned char *cursor = NULL;
- const char *digits = clientData;
int offset = 0, count = 0;
if (objc != 2) {
@@ -2324,8 +2326,8 @@ BinaryEncodeHex(
data = Tcl_GetByteArrayFromObj(objv[1], &count);
cursor = Tcl_SetByteArrayLength(resultObj, count * 2);
for (offset = 0; offset < count; ++offset) {
- *cursor++ = digits[((data[offset] >> 4) & 0x0f)];
- *cursor++ = digits[(data[offset] & 0x0f)];
+ *cursor++ = HexDigits[((data[offset] >> 4) & 0x0f)];
+ *cursor++ = HexDigits[(data[offset] & 0x0f)];
}
Tcl_SetObjResult(interp, resultObj);
return TCL_OK;
@@ -2439,7 +2441,7 @@ BinaryDecodeHex(
* This implements a generic 6 bit binary encoding. Input is broken into
* 6 bit chunks and a lookup table passed in via clientData is used to
* turn these values into output characters. This is used to implement
- * base64 and uuencode binary encodings.
+ * base64 binary encodings.
*
* Results:
* Interp result set to an encoded byte array object
@@ -2475,7 +2477,6 @@ BinaryEncode64(
{
Tcl_Obj *resultObj;
unsigned char *data, *cursor, *limit;
- const char *digits = clientData;
int maxlen = 0;
const char *wrapchar = "\n";
int wrapcharlen = 1;
@@ -2498,6 +2499,12 @@ BinaryEncode64(
if (Tcl_GetIntFromObj(interp, objv[i+1], &maxlen) != TCL_OK) {
return TCL_ERROR;
}
+ if (maxlen < 0) {
+ Tcl_SetResult(interp, "line length out of range", TCL_STATIC);
+ Tcl_SetErrorCode(interp, "TCL", "BINARY", "ENCODE",
+ "LINE_LENGTH", NULL);
+ return TCL_ERROR;
+ }
break;
case OPT_WRAPCHAR:
wrapchar = Tcl_GetStringFromObj(objv[i+1], &wrapcharlen);
@@ -2528,17 +2535,17 @@ BinaryEncode64(
for (i = 0; i < 3 && offset+i < count; ++i) {
d[i] = data[offset + i];
}
- OUTPUT(digits[d[0] >> 2]);
- OUTPUT(digits[((d[0] & 0x03) << 4) | (d[1] >> 4)]);
+ OUTPUT(B64Digits[d[0] >> 2]);
+ OUTPUT(B64Digits[((d[0] & 0x03) << 4) | (d[1] >> 4)]);
if (offset+1 < count) {
- OUTPUT(digits[((d[1] & 0x0f) << 2) | (d[2] >> 6)]);
+ OUTPUT(B64Digits[((d[1] & 0x0f) << 2) | (d[2] >> 6)]);
} else {
- OUTPUT(digits[64]);
+ OUTPUT(B64Digits[64]);
}
if (offset+2 < count) {
- OUTPUT(digits[d[2] & 0x3f]);
+ OUTPUT(B64Digits[d[2] & 0x3f]);
} else {
- OUTPUT(digits[64]);
+ OUTPUT(B64Digits[64]);
}
}
}
@@ -2550,6 +2557,124 @@ BinaryEncode64(
/*
*----------------------------------------------------------------------
*
+ * BinaryEncodeUu --
+ *
+ * This implements the uuencode binary encoding. Input is broken into 6
+ * bit chunks and a lookup table is used to turn these values into output
+ * characters. This differs from the generic code above in that line
+ * lengths are also encoded.
+ *
+ * Results:
+ * Interp result set to an encoded byte array object
+ *
+ * Side effects:
+ * None
+ *
+ *----------------------------------------------------------------------
+ */
+
+static int
+BinaryEncodeUu(
+ ClientData clientData,
+ Tcl_Interp *interp,
+ int objc,
+ Tcl_Obj *const objv[])
+{
+ Tcl_Obj *resultObj;
+ unsigned char *data, *start, *cursor;
+ int offset, count, rawLength, n, i, j, bits, index;
+ int lineLength = 61;
+ const unsigned char SingleNewline[] = { (unsigned char) '\n' };
+ const unsigned char *wrapchar = SingleNewline;
+ int wrapcharlen = sizeof(SingleNewline);
+ enum { OPT_MAXLEN, OPT_WRAPCHAR };
+ static const char *const optStrings[] = { "-maxlen", "-wrapchar", NULL };
+
+ if (objc < 2 || objc%2 != 0) {
+ Tcl_WrongNumArgs(interp, 1, objv,
+ "?-maxlen len? ?-wrapchar char? data");
+ return TCL_ERROR;
+ }
+ for (i = 1; i < objc-1; i += 2) {
+ if (Tcl_GetIndexFromObj(interp, objv[i], optStrings, "option",
+ TCL_EXACT, &index) != TCL_OK) {
+ return TCL_ERROR;
+ }
+ switch (index) {
+ case OPT_MAXLEN:
+ if (Tcl_GetIntFromObj(interp, objv[i+1], &lineLength) != TCL_OK) {
+ return TCL_ERROR;
+ }
+ if (lineLength < 3 || lineLength > 85) {
+ Tcl_SetResult(interp, "line length out of range", TCL_STATIC);
+ Tcl_SetErrorCode(interp, "TCL", "BINARY", "ENCODE",
+ "LINE_LENGTH", NULL);
+ return TCL_ERROR;
+ }
+ break;
+ case OPT_WRAPCHAR:
+ wrapchar = Tcl_GetByteArrayFromObj(objv[i+1], &wrapcharlen);
+ break;
+ }
+ }
+
+ /*
+ * Allocate the buffer. This is a little bit too long, but is "good
+ * enough".
+ */
+
+ resultObj = Tcl_NewObj();
+ offset = 0;
+ data = Tcl_GetByteArrayFromObj(objv[objc-1], &count);
+ rawLength = (lineLength - 1) * 3 / 4;
+ start = cursor = Tcl_SetByteArrayLength(resultObj,
+ (lineLength + wrapcharlen) *
+ ((count + (rawLength - 1)) / rawLength));
+ n = bits = 0;
+
+ /*
+ * Encode the data. Each output line first has the length of raw data
+ * encoded by the output line described in it by one encoded byte, then
+ * the encoded data follows (encoding each 6 bits as one character).
+ * Encoded lines are always terminated by a newline.
+ */
+
+ while (offset < count) {
+ int lineLen = count - offset;
+
+ if (lineLen > rawLength) {
+ lineLen = rawLength;
+ }
+ *cursor++ = UueDigits[lineLen];
+ for (i=0 ; i<lineLen ; i++) {
+ n <<= 8;
+ n |= data[offset++];
+ for (bits += 8; bits > 6 ; bits -= 6) {
+ *cursor++ = UueDigits[(n >> (bits-6)) & 0x3f];
+ }
+ }
+ if (bits > 0) {
+ n <<= 8;
+ *cursor++ = UueDigits[(n >> (bits + 2)) & 0x3f];
+ bits = 0;
+ }
+ for (j=0 ; j<wrapcharlen ; ++j) {
+ *cursor++ = wrapchar[j];
+ }
+ }
+
+ /*
+ * Fix the length of the output bytearray.
+ */
+
+ Tcl_SetByteArrayLength(resultObj, cursor-start);
+ Tcl_SetObjResult(interp, resultObj);
+ return TCL_OK;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
* BinaryDecodeUu --
*
* Decode a uuencoded string.
@@ -2573,8 +2698,8 @@ BinaryDecodeUu(
Tcl_Obj *resultObj = NULL;
unsigned char *data, *datastart, *dataend;
unsigned char *begin, *cursor;
- int i, index, size, count = 0, cut = 0, strict = 0;
- char c;
+ int i, index, size, count = 0, strict = 0, lineLen;
+ unsigned char c;
enum {OPT_STRICT };
static const char *const optStrings[] = { "-strict", NULL };
@@ -2600,44 +2725,112 @@ BinaryDecodeUu(
dataend = data + count;
size = ((count + 3) & ~3) * 3 / 4;
begin = cursor = Tcl_SetByteArrayLength(resultObj, size);
+ lineLen = -1;
+
+ /*
+ * The decoding loop. First, we get the length of line (strictly, the
+ * number of data bytes we expect to generate from the line) we're
+ * processing this time round if it is not already known (i.e., when the
+ * lineLen variable is set to the magic value, -1).
+ */
+
while (data < dataend) {
char d[4] = {0, 0, 0, 0};
+ if (lineLen < 0) {
+ c = *data++;
+ if (c < 32 || c > 96) {
+ if (strict || !isspace(c)) {
+ goto badUu;
+ }
+ i--;
+ continue;
+ }
+ lineLen = (c - 32) & 0x3f;
+ }
+
+ /*
+ * Now we read a four-character grouping.
+ */
+
for (i=0 ; i<4 ; i++) {
if (data < dataend) {
d[i] = c = *data++;
- if (c < 33 || c > 96) {
- if (strict || !isspace(UCHAR(c))) {
- goto badUu;
+ if (c < 32 || c > 96) {
+ if (strict) {
+ if (!isspace(c)) {
+ goto badUu;
+ } else if (c == '\n') {
+ goto shortUu;
+ }
}
i--;
continue;
}
- } else {
- cut++;
}
}
- if (cut > 3) {
- cut = 3;
+
+ /*
+ * Translate that grouping into (up to) three binary bytes output.
+ */
+
+ if (lineLen > 0) {
+ *cursor++ = (((d[0] - 0x20) & 0x3f) << 2)
+ | (((d[1] - 0x20) & 0x3f) >> 4);
+ if (--lineLen > 0) {
+ *cursor++ = (((d[1] - 0x20) & 0x3f) << 4)
+ | (((d[2] - 0x20) & 0x3f) >> 2);
+ if (--lineLen > 0) {
+ *cursor++ = (((d[2] - 0x20) & 0x3f) << 6)
+ | (((d[3] - 0x20) & 0x3f));
+ lineLen--;
+ }
+ }
+ }
+
+ /*
+ * If we've reached the end of the line, skip until we process a
+ * newline.
+ */
+
+ if (lineLen == 0 && data < dataend) {
+ lineLen = -1;
+ do {
+ c = *data++;
+ if (c == '\n') {
+ break;
+ } else if (c >= 32 && c <= 96) {
+ data--;
+ break;
+ } else if (strict || !isspace(c)) {
+ goto badUu;
+ }
+ } while (data < dataend);
}
- *cursor++ = (((d[0] - 0x20) & 0x3f) << 2)
- | (((d[1] - 0x20) & 0x3f) >> 4);
- *cursor++ = (((d[1] - 0x20) & 0x3f) << 4)
- | (((d[2] - 0x20) & 0x3f) >> 2);
- *cursor++ = (((d[2] - 0x20) & 0x3f) << 6)
- | (((d[3] - 0x20) & 0x3f));
}
- if (cut > size) {
- cut = size;
+
+ /*
+ * Sanity check, clean up and finish.
+ */
+
+ if (lineLen > 0 && strict) {
+ goto shortUu;
}
- Tcl_SetByteArrayLength(resultObj, cursor - begin - cut);
+ Tcl_SetByteArrayLength(resultObj, cursor - begin);
Tcl_SetObjResult(interp, resultObj);
return TCL_OK;
+ shortUu:
+ Tcl_SetObjResult(interp, Tcl_ObjPrintf("short uuencode data"));
+ Tcl_SetErrorCode(interp, "TCL", "BINARY", "DECODE", "SHORT", NULL);
+ TclDecrRefCount(resultObj);
+ return TCL_ERROR;
+
badUu:
Tcl_SetObjResult(interp, Tcl_ObjPrintf(
"invalid uuencode character \"%c\" at position %d",
c, (int) (data - datastart - 1)));
+ Tcl_SetErrorCode(interp, "TCL", "BINARY", "DECODE", "INVALID", NULL);
TclDecrRefCount(resultObj);
return TCL_ERROR;
}
generated by cgit v0.12 at 2024-11-01 23:37:57 (GMT)