summaryrefslogtreecommitdiffstats
path: root/generic/tclCompile.c
diff options
context:
space:
mode:
Diffstat (limited to 'generic/tclCompile.c')
-rw-r--r--generic/tclCompile.c3175
1 files changed, 1836 insertions, 1339 deletions
diff --git a/generic/tclCompile.c b/generic/tclCompile.c
index 5030f89..0f4dfaf 100644
--- a/generic/tclCompile.c
+++ b/generic/tclCompile.c
@@ -14,6 +14,7 @@
#include "tclInt.h"
#include "tclCompile.h"
+#include <assert.h>
/*
* Table of all AuxData types.
@@ -37,7 +38,7 @@ TCL_DECLARE_MUTEX(tableMutex)
int tclTraceCompile = 0;
static int traceInitialized = 0;
#endif
-
+
/*
* A table describing the Tcl bytecode instructions. Entries in this table
* must correspond to the instruction opcode definitions in tclCompile.h. The
@@ -50,19 +51,19 @@ static int traceInitialized = 0;
* existence of a procedure call frame to distinguish these.
*/
-InstructionDesc tclInstructionTable[] = {
+InstructionDesc const tclInstructionTable[] = {
/* Name Bytes stackEffect #Opnds Operand types */
{"done", 1, -1, 0, {OPERAND_NONE}},
/* Finish ByteCode execution and return stktop (top stack item) */
- {"push1", 2, +1, 1, {OPERAND_UINT1}},
+ {"push1", 2, +1, 1, {OPERAND_LIT1}},
/* Push object at ByteCode objArray[op1] */
- {"push4", 5, +1, 1, {OPERAND_UINT4}},
+ {"push4", 5, +1, 1, {OPERAND_LIT4}},
/* Push object at ByteCode objArray[op4] */
{"pop", 1, -1, 0, {OPERAND_NONE}},
/* Pop the topmost stack object */
{"dup", 1, +1, 0, {OPERAND_NONE}},
/* Duplicate the topmost stack object and push the result */
- {"concat1", 2, INT_MIN, 1, {OPERAND_UINT1}},
+ {"strcat", 2, INT_MIN, 1, {OPERAND_UINT1}},
/* Concatenate the top op1 items and push result */
{"invokeStk1", 2, INT_MIN, 1, {OPERAND_UINT1}},
/* Invoke command named objv[0]; <objc,objv> = <op1,top op1> */
@@ -124,17 +125,17 @@ InstructionDesc tclInstructionTable[] = {
{"incrStkImm", 2, 0, 1, {OPERAND_INT1}},
/* Incr general variable; unparsed name is top, amount is op1 */
- {"jump1", 2, 0, 1, {OPERAND_INT1}},
+ {"jump1", 2, 0, 1, {OPERAND_OFFSET1}},
/* Jump relative to (pc + op1) */
- {"jump4", 5, 0, 1, {OPERAND_INT4}},
+ {"jump4", 5, 0, 1, {OPERAND_OFFSET4}},
/* Jump relative to (pc + op4) */
- {"jumpTrue1", 2, -1, 1, {OPERAND_INT1}},
+ {"jumpTrue1", 2, -1, 1, {OPERAND_OFFSET1}},
/* Jump relative to (pc + op1) if stktop expr object is true */
- {"jumpTrue4", 5, -1, 1, {OPERAND_INT4}},
+ {"jumpTrue4", 5, -1, 1, {OPERAND_OFFSET4}},
/* Jump relative to (pc + op4) if stktop expr object is true */
- {"jumpFalse1", 2, -1, 1, {OPERAND_INT1}},
+ {"jumpFalse1", 2, -1, 1, {OPERAND_OFFSET1}},
/* Jump relative to (pc + op1) if stktop expr object is false */
- {"jumpFalse4", 5, -1, 1, {OPERAND_INT4}},
+ {"jumpFalse4", 5, -1, 1, {OPERAND_OFFSET4}},
/* Jump relative to (pc + op4) if stktop expr object is false */
{"lor", 1, -1, 0, {OPERAND_NONE}},
@@ -154,11 +155,11 @@ InstructionDesc tclInstructionTable[] = {
{"lt", 1, -1, 0, {OPERAND_NONE}},
/* Less: push (stknext < stktop) */
{"gt", 1, -1, 0, {OPERAND_NONE}},
- /* Greater: push (stknext || stktop) */
+ /* Greater: push (stknext > stktop) */
{"le", 1, -1, 0, {OPERAND_NONE}},
- /* Less or equal: push (stknext || stktop) */
+ /* Less or equal: push (stknext <= stktop) */
{"ge", 1, -1, 0, {OPERAND_NONE}},
- /* Greater or equal: push (stknext || stktop) */
+ /* Greater or equal: push (stknext >= stktop) */
{"lshift", 1, -1, 0, {OPERAND_NONE}},
/* Left shift: push (stknext << stktop) */
{"rshift", 1, -1, 0, {OPERAND_NONE}},
@@ -297,7 +298,7 @@ InstructionDesc tclInstructionTable[] = {
/* List Index: push (lindex stktop op4) */
{"listRangeImm", 9, 0, 2, {OPERAND_IDX4, OPERAND_IDX4}},
/* List Range: push (lrange stktop op4 op4) */
- {"startCommand", 9, 0, 2, {OPERAND_INT4,OPERAND_UINT4}},
+ {"startCommand", 9, 0, 2, {OPERAND_OFFSET4, OPERAND_UINT4}},
/* Start of bytecoded command: op is the length of the cmd's code, op2
* is number of commands here */
@@ -309,7 +310,7 @@ InstructionDesc tclInstructionTable[] = {
{"pushReturnOpts", 1, +1, 0, {OPERAND_NONE}},
/* Push the interpreter's return option dictionary as an object on the
* stack. */
- {"returnStk", 1, -2, 0, {OPERAND_NONE}},
+ {"returnStk", 1, -1, 0, {OPERAND_NONE}},
/* Compiled [return]; options and result are on the stack, code and
* level are in the options. */
@@ -341,21 +342,23 @@ InstructionDesc tclInstructionTable[] = {
* Stack: ... key valueToAppend => ... newDict */
{"dictFirst", 5, +2, 1, {OPERAND_LVT4}},
/* Begin iterating over the dictionary, using the local scalar
- * indicated by op4 to hold the iterator state. If doneBool is true,
- * dictDone *must* be called later on.
+ * indicated by op4 to hold the iterator state. The local scalar
+ * should not refer to a named variable as the value is not wholly
+ * managed correctly.
* Stack: ... dict => ... value key doneBool */
{"dictNext", 5, +3, 1, {OPERAND_LVT4}},
/* Get the next iteration from the iterator in op4's local scalar.
* Stack: ... => ... value key doneBool */
{"dictDone", 5, 0, 1, {OPERAND_LVT4}},
- /* Terminate the iterator in op4's local scalar. */
+ /* Terminate the iterator in op4's local scalar. Use unsetScalar
+ * instead (with 0 for flags). */
{"dictUpdateStart", 9, 0, 2, {OPERAND_LVT4, OPERAND_AUX4}},
/* Create the variables (described in the aux data referred to by the
* second immediate argument) to mirror the state of the dictionary in
* the variable referred to by the first immediate argument. The list
- * of keys (popped from the stack) must be the same length as the list
- * of variables.
- * Stack: ... keyList => ... */
+ * of keys (top of the stack, not poppsed) must be the same length as
+ * the list of variables.
+ * Stack: ... keyList => ... keyList */
{"dictUpdateEnd", 9, -1, 2, {OPERAND_LVT4, OPERAND_AUX4}},
/* Reflect the state of local variables (described in the aux data
* referred to by the second immediate argument) back to the state of
@@ -363,24 +366,25 @@ InstructionDesc tclInstructionTable[] = {
* argument. The list of keys (popped from the stack) must be the same
* length as the list of variables.
* Stack: ... keyList => ... */
- {"jumpTable", 5, -1, 1, {OPERAND_AUX4}},
+ {"jumpTable", 5, -1, 1, {OPERAND_AUX4}},
/* Jump according to the jump-table (in AuxData as indicated by the
* operand) and the argument popped from the list. Always executes the
* next instruction if no match against the table's entries was found.
* Stack: ... value => ...
* Note that the jump table contains offsets relative to the PC when
* it points to this instruction; the code is relocatable. */
- {"upvar", 5, 0, 1, {OPERAND_LVT4}},
- /* finds level and otherName in stack, links to local variable at
- * index op1. Leaves the level on stack. */
- {"nsupvar", 5, 0, 1, {OPERAND_LVT4}},
- /* finds namespace and otherName in stack, links to local variable at
- * index op1. Leaves the namespace on stack. */
- {"variable", 5, 0, 1, {OPERAND_LVT4}},
- /* finds namespace and otherName in stack, links to local variable at
- * index op1. Leaves the namespace on stack. */
- {"syntax", 9, -1, 2, {OPERAND_INT4, OPERAND_UINT4}},
- /* Compiled bytecodes to signal syntax error. */
+ {"upvar", 5, -1, 1, {OPERAND_LVT4}},
+ /* finds level and otherName in stack, links to local variable at
+ * index op1. Leaves the level on stack. */
+ {"nsupvar", 5, -1, 1, {OPERAND_LVT4}},
+ /* finds namespace and otherName in stack, links to local variable at
+ * index op1. Leaves the namespace on stack. */
+ {"variable", 5, -1, 1, {OPERAND_LVT4}},
+ /* finds namespace and otherName in stack, links to local variable at
+ * index op1. Leaves the namespace on stack. */
+ {"syntax", 9, -1, 2, {OPERAND_INT4, OPERAND_UINT4}},
+ /* Compiled bytecodes to signal syntax error. Equivalent to returnImm
+ * except for the ERR_ALREADY_LOGGED flag in the interpreter. */
{"reverse", 5, 0, 1, {OPERAND_UINT4}},
/* Reverse the order of the arg elements at the top of stack */
@@ -397,13 +401,277 @@ InstructionDesc tclInstructionTable[] = {
* stknext */
{"existStk", 1, 0, 0, {OPERAND_NONE}},
/* Test if general variable exists; unparsed variable name is stktop*/
- {0, 0, 0, 0, {0}}
-};
+ {"nop", 1, 0, 0, {OPERAND_NONE}},
+ /* Do nothing */
+ {"returnCodeBranch", 1, -1, 0, {OPERAND_NONE}},
+ /* Jump to next instruction based on the return code on top of stack
+ * ERROR: +1; RETURN: +3; BREAK: +5; CONTINUE: +7;
+ * Other non-OK: +9
+ */
+
+ {"unsetScalar", 6, 0, 2, {OPERAND_UINT1, OPERAND_LVT4}},
+ /* Make scalar variable at index op2 in call frame cease to exist;
+ * op1 is 1 for errors on problems, 0 otherwise */
+ {"unsetArray", 6, -1, 2, {OPERAND_UINT1, OPERAND_LVT4}},
+ /* Make array element cease to exist; array at slot op2, element is
+ * stktop; op1 is 1 for errors on problems, 0 otherwise */
+ {"unsetArrayStk", 2, -2, 1, {OPERAND_UINT1}},
+ /* Make array element cease to exist; element is stktop, array name is
+ * stknext; op1 is 1 for errors on problems, 0 otherwise */
+ {"unsetStk", 2, -1, 1, {OPERAND_UINT1}},
+ /* Make general variable cease to exist; unparsed variable name is
+ * stktop; op1 is 1 for errors on problems, 0 otherwise */
+
+ {"dictExpand", 1, -1, 0, {OPERAND_NONE}},
+ /* Probe into a dict and extract it (or a subdict of it) into
+ * variables with matched names. Produces list of keys bound as
+ * result. Part of [dict with].
+ * Stack: ... dict path => ... keyList */
+ {"dictRecombineStk", 1, -3, 0, {OPERAND_NONE}},
+ /* Map variable contents back into a dictionary in a variable. Part of
+ * [dict with].
+ * Stack: ... dictVarName path keyList => ... */
+ {"dictRecombineImm", 5, -2, 1, {OPERAND_LVT4}},
+ /* Map variable contents back into a dictionary in the local variable
+ * indicated by the LVT index. Part of [dict with].
+ * Stack: ... path keyList => ... */
+ {"dictExists", 5, INT_MIN, 1, {OPERAND_UINT4}},
+ /* The top op4 words (min 1) are a key path into the dictionary just
+ * below the keys on the stack, and all those values are replaced by a
+ * boolean indicating whether it is possible to read out a value from
+ * that key-path (like [dict exists]).
+ * Stack: ... dict key1 ... keyN => ... boolean */
+ {"verifyDict", 1, -1, 0, {OPERAND_NONE}},
+ /* Verifies that the word on the top of the stack is a dictionary,
+ * popping it if it is and throwing an error if it is not.
+ * Stack: ... value => ... */
+
+ {"strmap", 1, -2, 0, {OPERAND_NONE}},
+ /* Simplified version of [string map] that only applies one change
+ * string, and only case-sensitively.
+ * Stack: ... from to string => ... changedString */
+ {"strfind", 1, -1, 0, {OPERAND_NONE}},
+ /* Find the first index of a needle string in a haystack string,
+ * producing the index (integer) or -1 if nothing found.
+ * Stack: ... needle haystack => ... index */
+ {"strrfind", 1, -1, 0, {OPERAND_NONE}},
+ /* Find the last index of a needle string in a haystack string,
+ * producing the index (integer) or -1 if nothing found.
+ * Stack: ... needle haystack => ... index */
+ {"strrangeImm", 9, 0, 2, {OPERAND_IDX4, OPERAND_IDX4}},
+ /* String Range: push (string range stktop op4 op4) */
+ {"strrange", 1, -2, 0, {OPERAND_NONE}},
+ /* String Range with non-constant arguments.
+ * Stack: ... string idxA idxB => ... substring */
+
+ {"yield", 1, 0, 0, {OPERAND_NONE}},
+ /* Makes the current coroutine yield the value at the top of the
+ * stack, and places the response back on top of the stack when it
+ * resumes.
+ * Stack: ... valueToYield => ... resumeValue */
+ {"coroName", 1, +1, 0, {OPERAND_NONE}},
+ /* Push the name of the interpreter's current coroutine as an object
+ * on the stack. */
+ {"tailcall", 2, INT_MIN, 1, {OPERAND_UINT1}},
+ /* Do a tailcall with the opnd items on the stack as the thing to
+ * tailcall to; opnd must be greater than 0 for the semantics to work
+ * right. */
+
+ {"currentNamespace", 1, +1, 0, {OPERAND_NONE}},
+ /* Push the name of the interpreter's current namespace as an object
+ * on the stack. */
+ {"infoLevelNumber", 1, +1, 0, {OPERAND_NONE}},
+ /* Push the stack depth (i.e., [info level]) of the interpreter as an
+ * object on the stack. */
+ {"infoLevelArgs", 1, 0, 0, {OPERAND_NONE}},
+ /* Push the argument words to a stack depth (i.e., [info level <n>])
+ * of the interpreter as an object on the stack.
+ * Stack: ... depth => ... argList */
+ {"resolveCmd", 1, 0, 0, {OPERAND_NONE}},
+ /* Resolves the command named on the top of the stack to its fully
+ * qualified version, or produces the empty string if no such command
+ * exists. Never generates errors.
+ * Stack: ... cmdName => ... fullCmdName */
+
+ {"tclooSelf", 1, +1, 0, {OPERAND_NONE}},
+ /* Push the identity of the current TclOO object (i.e., the name of
+ * its current public access command) on the stack. */
+ {"tclooClass", 1, 0, 0, {OPERAND_NONE}},
+ /* Push the class of the TclOO object named at the top of the stack
+ * onto the stack.
+ * Stack: ... object => ... class */
+ {"tclooNamespace", 1, 0, 0, {OPERAND_NONE}},
+ /* Push the namespace of the TclOO object named at the top of the
+ * stack onto the stack.
+ * Stack: ... object => ... namespace */
+ {"tclooIsObject", 1, 0, 0, {OPERAND_NONE}},
+ /* Push whether the value named at the top of the stack is a TclOO
+ * object (i.e., a boolean). Can corrupt the interpreter result
+ * despite not throwing, so not safe for use in a post-exception
+ * context.
+ * Stack: ... value => ... boolean */
+
+ {"arrayExistsStk", 1, 0, 0, {OPERAND_NONE}},
+ /* Looks up the element on the top of the stack and tests whether it
+ * is an array. Pushes a boolean describing whether this is the
+ * case. Also runs the whole-array trace on the named variable, so can
+ * throw anything.
+ * Stack: ... varName => ... boolean */
+ {"arrayExistsImm", 5, +1, 1, {OPERAND_UINT4}},
+ /* Looks up the variable indexed by opnd and tests whether it is an
+ * array. Pushes a boolean describing whether this is the case. Also
+ * runs the whole-array trace on the named variable, so can throw
+ * anything.
+ * Stack: ... => ... boolean */
+ {"arrayMakeStk", 1, -1, 0, {OPERAND_NONE}},
+ /* Forces the element on the top of the stack to be the name of an
+ * array.
+ * Stack: ... varName => ... */
+ {"arrayMakeImm", 5, 0, 1, {OPERAND_UINT4}},
+ /* Forces the variable indexed by opnd to be an array. Does not touch
+ * the stack. */
+
+ {"invokeReplace", 6, INT_MIN, 2, {OPERAND_UINT4,OPERAND_UINT1}},
+ /* Invoke command named objv[0], replacing the first two words with
+ * the word at the top of the stack;
+ * <objc,objv> = <op4,top op4 after popping 1> */
+
+ {"listConcat", 1, -1, 0, {OPERAND_NONE}},
+ /* Concatenates the two lists at the top of the stack into a single
+ * list and pushes that resulting list onto the stack.
+ * Stack: ... list1 list2 => ... [lconcat list1 list2] */
+
+ {"expandDrop", 1, 0, 0, {OPERAND_NONE}},
+ /* Drops an element from the auxiliary stack, popping stack elements
+ * until the matching stack depth is reached. */
+
+ /* New foreach implementation */
+ {"foreach_start", 5, +2, 1, {OPERAND_AUX4}},
+ /* Initialize execution of a foreach loop. Operand is aux data index
+ * of the ForeachInfo structure for the foreach command. It pushes 2
+ * elements which hold runtime params for foreach_step, they are later
+ * dropped by foreach_end together with the value lists. NOTE that the
+ * iterator-tracker and info reference must not be passed to bytecodes
+ * that handle normal Tcl values. NOTE that this instruction jumps to
+ * the foreach_step instruction paired with it; the stack info below
+ * is only nominal.
+ * Stack: ... listObjs... => ... listObjs... iterTracker info */
+ {"foreach_step", 1, 0, 0, {OPERAND_NONE}},
+ /* "Step" or begin next iteration of foreach loop. Assigns to foreach
+ * iteration variables. May jump to straight after the foreach_start
+ * that pushed the iterTracker and info values. MUST be followed
+ * immediately by a foreach_end.
+ * Stack: ... listObjs... iterTracker info =>
+ * ... listObjs... iterTracker info */
+ {"foreach_end", 1, 0, 0, {OPERAND_NONE}},
+ /* Clean up a foreach loop by dropping the info value, the tracker
+ * value and the lists that were being iterated over.
+ * Stack: ... listObjs... iterTracker info => ... */
+ {"lmap_collect", 1, -1, 0, {OPERAND_NONE}},
+ /* Appends the value at the top of the stack to the list located on
+ * the stack the "other side" of the foreach-related values.
+ * Stack: ... collector listObjs... iterTracker info value =>
+ * ... collector listObjs... iterTracker info */
+
+ {"strtrim", 1, -1, 0, {OPERAND_NONE}},
+ /* [string trim] core: removes the characters (designated by the value
+ * at the top of the stack) from both ends of the string and pushes
+ * the resulting string.
+ * Stack: ... string charset => ... trimmedString */
+ {"strtrimLeft", 1, -1, 0, {OPERAND_NONE}},
+ /* [string trimleft] core: removes the characters (designated by the
+ * value at the top of the stack) from the left of the string and
+ * pushes the resulting string.
+ * Stack: ... string charset => ... trimmedString */
+ {"strtrimRight", 1, -1, 0, {OPERAND_NONE}},
+ /* [string trimright] core: removes the characters (designated by the
+ * value at the top of the stack) from the right of the string and
+ * pushes the resulting string.
+ * Stack: ... string charset => ... trimmedString */
+
+ {"concatStk", 5, INT_MIN, 1, {OPERAND_UINT4}},
+ /* Wrapper round Tcl_ConcatObj(), used for [concat] and [eval]. opnd
+ * is number of values to concatenate.
+ * Operation: push concat(stk1 stk2 ... stktop) */
+
+ {"strcaseUpper", 1, 0, 0, {OPERAND_NONE}},
+ /* [string toupper] core: converts whole string to upper case using
+ * the default (extended "C" locale) rules.
+ * Stack: ... string => ... newString */
+ {"strcaseLower", 1, 0, 0, {OPERAND_NONE}},
+ /* [string tolower] core: converts whole string to upper case using
+ * the default (extended "C" locale) rules.
+ * Stack: ... string => ... newString */
+ {"strcaseTitle", 1, 0, 0, {OPERAND_NONE}},
+ /* [string totitle] core: converts whole string to upper case using
+ * the default (extended "C" locale) rules.
+ * Stack: ... string => ... newString */
+ {"strreplace", 1, -3, 0, {OPERAND_NONE}},
+ /* [string replace] core: replaces a non-empty range of one string
+ * with the contents of another.
+ * Stack: ... string fromIdx toIdx replacement => ... newString */
+
+ {"originCmd", 1, 0, 0, {OPERAND_NONE}},
+ /* Reports which command was the origin (via namespace import chain)
+ * of the command named on the top of the stack.
+ * Stack: ... cmdName => ... fullOriginalCmdName */
+
+ {"tclooNext", 2, INT_MIN, 1, {OPERAND_UINT1}},
+ /* Call the next item on the TclOO call chain, passing opnd arguments
+ * (min 1, max 255, *includes* "next"). The result of the invoked
+ * method implementation will be pushed on the stack in place of the
+ * arguments (similar to invokeStk).
+ * Stack: ... "next" arg2 arg3 -- argN => ... result */
+ {"tclooNextClass", 2, INT_MIN, 1, {OPERAND_UINT1}},
+ /* Call the following item on the TclOO call chain defined by class
+ * className, passing opnd arguments (min 2, max 255, *includes*
+ * "nextto" and the class name). The result of the invoked method
+ * implementation will be pushed on the stack in place of the
+ * arguments (similar to invokeStk).
+ * Stack: ... "nextto" className arg3 arg4 -- argN => ... result */
+
+ {"yieldToInvoke", 1, 0, 0, {OPERAND_NONE}},
+ /* Makes the current coroutine yield the value at the top of the
+ * stack, invoking the given command/args with resolution in the given
+ * namespace (all packed into a list), and places the list of values
+ * that are the response back on top of the stack when it resumes.
+ * Stack: ... [list ns cmd arg1 ... argN] => ... resumeList */
+
+ {"numericType", 1, 0, 0, {OPERAND_NONE}},
+ /* Pushes the numeric type code of the word at the top of the stack.
+ * Stack: ... value => ... typeCode */
+ {"tryCvtToBoolean", 1, +1, 0, {OPERAND_NONE}},
+ /* Try converting stktop to boolean if possible. No errors.
+ * Stack: ... value => ... value isStrictBool */
+ {"strclass", 2, 0, 1, {OPERAND_SCLS1}},
+ /* See if all the characters of the given string are a member of the
+ * specified (by opnd) character class. Note that an empty string will
+ * satisfy the class check (standard definition of "all").
+ * Stack: ... stringValue => ... boolean */
+
+ {"lappendList", 5, 0, 1, {OPERAND_LVT4}},
+ /* Lappend list to scalar variable at op4 in frame.
+ * Stack: ... list => ... listVarContents */
+ {"lappendListArray", 5, -1, 1, {OPERAND_LVT4}},
+ /* Lappend list to array element; array at op4.
+ * Stack: ... elem list => ... listVarContents */
+ {"lappendListArrayStk", 1, -2, 0, {OPERAND_NONE}},
+ /* Lappend list to array element.
+ * Stack: ... arrayName elem list => ... listVarContents */
+ {"lappendListStk", 1, -1, 0, {OPERAND_NONE}},
+ /* Lappend list to general variable.
+ * Stack: ... varName list => ... listVarContents */
+
+ {NULL, 0, 0, 0, {OPERAND_NONE}}
+};
+
/*
* Prototypes for procedures defined later in this file:
*/
+static ByteCode * CompileSubstObj(Tcl_Interp *interp, Tcl_Obj *objPtr,
+ int flags);
static void DupByteCodeInternalRep(Tcl_Obj *srcPtr,
Tcl_Obj *copyPtr);
static unsigned char * EncodeCmdLocMap(CompileEnv *envPtr,
@@ -413,25 +681,26 @@ static void EnterCmdExtentData(CompileEnv *envPtr,
static void EnterCmdStartData(CompileEnv *envPtr,
int cmdNumber, int srcOffset, int codeOffset);
static void FreeByteCodeInternalRep(Tcl_Obj *objPtr);
+static void FreeSubstCodeInternalRep(Tcl_Obj *objPtr);
static int GetCmdLocEncodingSize(CompileEnv *envPtr);
+static int IsCompactibleCompileEnv(Tcl_Interp *interp,
+ CompileEnv *envPtr);
#ifdef TCL_COMPILE_STATS
static void RecordByteCodeStats(ByteCode *codePtr);
#endif /* TCL_COMPILE_STATS */
-static void RegisterAuxDataType(AuxDataType *typePtr);
+static void RegisterAuxDataType(const AuxDataType *typePtr);
static int SetByteCodeFromAny(Tcl_Interp *interp,
Tcl_Obj *objPtr);
-static int FormatInstruction(ByteCode *codePtr,
- unsigned char *pc, Tcl_Obj *bufferObj);
-static void PrintSourceToObj(Tcl_Obj *appendObj,
- const char *stringPtr, int maxChars);
+static void StartExpanding(CompileEnv *envPtr);
+
/*
* TIP #280: Helper for building the per-word line information of all compiled
* commands.
*/
static void EnterCmdWordData(ExtCmdLoc *eclPtr, int srcOffset,
Tcl_Token *tokenPtr, const char *cmd, int len,
- int numWords, int line, int* clNext, int **lines,
- CompileEnv* envPtr);
+ int numWords, int line, int *clNext, int **lines,
+ CompileEnv *envPtr);
static void ReleaseCmdWordData(ExtCmdLoc *eclPtr);
/*
@@ -439,13 +708,33 @@ static void ReleaseCmdWordData(ExtCmdLoc *eclPtr);
* procedures that can be invoked by generic object code.
*/
-Tcl_ObjType tclByteCodeType = {
+const Tcl_ObjType tclByteCodeType = {
"bytecode", /* name */
FreeByteCodeInternalRep, /* freeIntRepProc */
DupByteCodeInternalRep, /* dupIntRepProc */
NULL, /* updateStringProc */
SetByteCodeFromAny /* setFromAnyProc */
};
+
+/*
+ * The structure below defines a bytecode Tcl object type to hold the
+ * compiled bytecode for the [subst]itution of Tcl values.
+ */
+
+static const Tcl_ObjType substCodeType = {
+ "substcode", /* name */
+ FreeSubstCodeInternalRep, /* freeIntRepProc */
+ DupByteCodeInternalRep, /* dupIntRepProc - shared with bytecode */
+ NULL, /* updateStringProc */
+ NULL, /* setFromAnyProc */
+};
+
+/*
+ * Helper macros.
+ */
+
+#define TclIncrUInt4AtPtr(ptr, delta) \
+ TclStoreInt4AtPtr(TclGetUInt4AtPtr(ptr)+(delta), (ptr));
/*
*----------------------------------------------------------------------
@@ -486,7 +775,8 @@ TclSetByteCodeFromAny(
* in frame. */
int length, result = TCL_OK;
const char *stringPtr;
- ContLineLoc* clLocPtr;
+ Proc *procPtr = iPtr->compiledProcPtr;
+ ContLineLoc *clLocPtr;
#ifdef TCL_COMPILE_DEBUG
if (!traceInitialized) {
@@ -508,6 +798,7 @@ TclSetByteCodeFromAny(
TclInitCompileEnv(interp, &compEnv, stringPtr, length,
iPtr->invokeCmdFramePtr, iPtr->invokeWord);
+
/*
* Now we check if we have data about invisible continuation lines for the
* script, and make it available to the compile environment, if so.
@@ -515,16 +806,14 @@ TclSetByteCodeFromAny(
* It is not clear if the script Tcl_Obj* can be free'd while the compiler
* is using it, leading to the release of the associated ContLineLoc
* structure as well. To ensure that the latter doesn't happen we set a
- * lock on it. We release this lock in the function TclFreeCompileEnv (),
+ * lock on it. We release this lock in the function TclFreeCompileEnv(),
* found in this file. The "lineCLPtr" hashtable is managed in the file
* "tclObj.c".
*/
- clLocPtr = TclContinuationsGet (objPtr);
+ clLocPtr = TclContinuationsGet(objPtr);
if (clLocPtr) {
- compEnv.clLoc = clLocPtr;
- compEnv.clNext = &compEnv.clLoc->loc[0];
- Tcl_Preserve (compEnv.clLoc);
+ compEnv.clNext = &clLocPtr->loc[0];
}
TclCompileScript(interp, stringPtr, length, &compEnv);
@@ -536,11 +825,45 @@ TclSetByteCodeFromAny(
TclEmitOpcode(INST_DONE, &compEnv);
/*
+ * Check for optimizations!
+ *
+ * Test if the generated code is free of most hazards; if so, recompile
+ * but with generation of INST_START_CMD disabled. This produces somewhat
+ * faster code in some cases, and more compact code in more.
+ */
+
+ if (Tcl_GetMaster(interp) == NULL &&
+ !Tcl_LimitTypeEnabled(interp, TCL_LIMIT_COMMANDS|TCL_LIMIT_TIME)
+ && IsCompactibleCompileEnv(interp, &compEnv)) {
+ TclFreeCompileEnv(&compEnv);
+ iPtr->compiledProcPtr = procPtr;
+ TclInitCompileEnv(interp, &compEnv, stringPtr, length,
+ iPtr->invokeCmdFramePtr, iPtr->invokeWord);
+ if (clLocPtr) {
+ compEnv.clNext = &clLocPtr->loc[0];
+ }
+ compEnv.atCmdStart = 2; /* The disabling magic. */
+ TclCompileScript(interp, stringPtr, length, &compEnv);
+ assert (compEnv.atCmdStart > 1);
+ TclEmitOpcode(INST_DONE, &compEnv);
+ assert (compEnv.atCmdStart > 1);
+ }
+
+ /*
+ * Apply some peephole optimizations that can cross specific/generic
+ * instruction generator boundaries.
+ */
+
+ if (iPtr->extra.optimizer) {
+ (iPtr->extra.optimizer)(&compEnv);
+ }
+
+ /*
* Invoke the compilation hook procedure if one exists.
*/
if (hookProc) {
- result = (*hookProc)(interp, &compEnv, clientData);
+ result = hookProc(interp, &compEnv, clientData);
}
/*
@@ -598,8 +921,7 @@ SetByteCodeFromAny(
if (interp == NULL) {
return TCL_ERROR;
}
- (void) TclSetByteCodeFromAny(interp, objPtr, NULL, (ClientData) NULL);
- return TCL_OK;
+ return TclSetByteCodeFromAny(interp, objPtr, NULL, NULL);
}
/*
@@ -653,14 +975,13 @@ static void
FreeByteCodeInternalRep(
register Tcl_Obj *objPtr) /* Object whose internal rep to free. */
{
- register ByteCode *codePtr = (ByteCode *)
- objPtr->internalRep.twoPtrValue.ptr1;
+ register ByteCode *codePtr = objPtr->internalRep.twoPtrValue.ptr1;
+ objPtr->typePtr = NULL;
codePtr->refCount--;
if (codePtr->refCount <= 0) {
TclCleanupByteCode(codePtr);
}
- objPtr->typePtr = NULL;
}
/*
@@ -691,7 +1012,7 @@ TclCleanupByteCode(
int numLitObjects = codePtr->numLitObjects;
int numAuxDataItems = codePtr->numAuxDataItems;
register Tcl_Obj **objArrayPtr, *objPtr;
- register AuxData *auxDataPtr;
+ register const AuxData *auxDataPtr;
int i;
#ifdef TCL_COMPILE_STATS
@@ -700,7 +1021,7 @@ TclCleanupByteCode(
Tcl_Time destroyTime;
int lifetimeSec, lifetimeMicroSec, log2;
- statsPtr = &((Interp *) interp)->stats;
+ statsPtr = &iPtr->stats;
statsPtr->numByteCodesFreed++;
statsPtr->currentSrcBytes -= (double) codePtr->numSrcBytes;
@@ -752,7 +1073,7 @@ TclCleanupByteCode(
* released.
*/
- if ((codePtr->flags & TCL_BYTECODE_PRECOMPILED) || (interp == NULL)) {
+ if (codePtr->flags & TCL_BYTECODE_PRECOMPILED) {
objArrayPtr = codePtr->objArrayPtr;
for (i = 0; i < numLitObjects; i++) {
@@ -765,24 +1086,16 @@ TclCleanupByteCode(
codePtr->numLitObjects = 0;
} else {
objArrayPtr = codePtr->objArrayPtr;
- for (i = 0; i < numLitObjects; i++) {
- /*
- * TclReleaseLiteral sets a ByteCode's object array entry NULL to
- * indicate that it has already freed the literal.
- */
-
- objPtr = *objArrayPtr;
- if (objPtr != NULL) {
- TclReleaseLiteral(interp, objPtr);
- }
- objArrayPtr++;
+ while (numLitObjects--) {
+ /* TclReleaseLiteral calls Tcl_DecrRefCount() for us */
+ TclReleaseLiteral(interp, *objArrayPtr++);
}
}
auxDataPtr = codePtr->auxDataArrayPtr;
for (i = 0; i < numAuxDataItems; i++) {
if (auxDataPtr->type->freeProc != NULL) {
- (auxDataPtr->type->freeProc)(auxDataPtr->clientData);
+ auxDataPtr->type->freeProc(auxDataPtr->clientData);
}
auxDataPtr++;
}
@@ -798,6 +1111,7 @@ TclCleanupByteCode(
if (iPtr) {
Tcl_HashEntry *hePtr = Tcl_FindHashEntry(iPtr->lineBCPtr,
(char *) codePtr);
+
if (hePtr) {
ReleaseCmdWordData(Tcl_GetHashValue(hePtr));
Tcl_DeleteHashEntry(hePtr);
@@ -809,7 +1123,252 @@ TclCleanupByteCode(
}
TclHandleRelease(codePtr->interpHandle);
- ckfree((char *) codePtr);
+ ckfree(codePtr);
+}
+
+/*
+ * ---------------------------------------------------------------------
+ *
+ * IsCompactibleCompileEnv --
+ *
+ * Checks to see if we may apply some basic compaction optimizations to a
+ * piece of bytecode. Idempotent.
+ *
+ * ---------------------------------------------------------------------
+ */
+
+static int
+IsCompactibleCompileEnv(
+ Tcl_Interp *interp,
+ CompileEnv *envPtr)
+{
+ unsigned char *pc;
+ int size;
+
+ /*
+ * Special: procedures in the '::tcl' namespace (or its children) are
+ * considered to be well-behaved and so can have compaction applied even
+ * if it would otherwise be invalid.
+ */
+
+ if (envPtr->procPtr != NULL && envPtr->procPtr->cmdPtr != NULL
+ && envPtr->procPtr->cmdPtr->nsPtr != NULL) {
+ Namespace *nsPtr = envPtr->procPtr->cmdPtr->nsPtr;
+
+ if (strcmp(nsPtr->fullName, "::tcl") == 0
+ || strncmp(nsPtr->fullName, "::tcl::", 7) == 0) {
+ return 1;
+ }
+ }
+
+ /*
+ * Go through and ensure that no operation involved can cause a desired
+ * change of bytecode sequence during running. This comes down to ensuring
+ * that there are no mapped variables (due to traces) or calls to external
+ * commands (traces, [uplevel] trickery). This is actually a very
+ * conservative check; it turns down a lot of code that is OK in practice.
+ */
+
+ for (pc = envPtr->codeStart ; pc < envPtr->codeNext ; pc += size) {
+ switch (*pc) {
+ /* Invokes */
+ case INST_INVOKE_STK1:
+ case INST_INVOKE_STK4:
+ case INST_INVOKE_EXPANDED:
+ case INST_INVOKE_REPLACE:
+ return 0;
+ /* Runtime evals */
+ case INST_EVAL_STK:
+ case INST_EXPR_STK:
+ case INST_YIELD:
+ return 0;
+ /* Upvars */
+ case INST_UPVAR:
+ case INST_NSUPVAR:
+ case INST_VARIABLE:
+ return 0;
+ default:
+ size = tclInstructionTable[*pc].numBytes;
+ assert (size > 0);
+ break;
+ }
+ }
+
+ return 1;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_SubstObj --
+ *
+ * This function performs the substitutions specified on the given string
+ * as described in the user documentation for the "subst" Tcl command.
+ *
+ * Results:
+ * A Tcl_Obj* containing the substituted string, or NULL to indicate that
+ * an error occurred.
+ *
+ * Side effects:
+ * See the user documentation.
+ *
+ *----------------------------------------------------------------------
+ */
+
+Tcl_Obj *
+Tcl_SubstObj(
+ Tcl_Interp *interp, /* Interpreter in which substitution occurs */
+ Tcl_Obj *objPtr, /* The value to be substituted. */
+ int flags) /* What substitutions to do. */
+{
+ NRE_callback *rootPtr = TOP_CB(interp);
+
+ if (TclNRRunCallbacks(interp, Tcl_NRSubstObj(interp, objPtr, flags),
+ rootPtr) != TCL_OK) {
+ return NULL;
+ }
+ return Tcl_GetObjResult(interp);
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_NRSubstObj --
+ *
+ * Request substitution of a Tcl value by the NR stack.
+ *
+ * Results:
+ * Returns TCL_OK.
+ *
+ * Side effects:
+ * Compiles objPtr into bytecode that performs the substitutions as
+ * governed by flags and places callbacks on the NR stack to execute
+ * the bytecode and store the result in the interp.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+Tcl_NRSubstObj(
+ Tcl_Interp *interp,
+ Tcl_Obj *objPtr,
+ int flags)
+{
+ ByteCode *codePtr = CompileSubstObj(interp, objPtr, flags);
+
+ /* TODO: Confirm we do not need this. */
+ /* Tcl_ResetResult(interp); */
+ return TclNRExecuteByteCode(interp, codePtr);
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * CompileSubstObj --
+ *
+ * Compile a Tcl value into ByteCode implementing its substitution, as
+ * governed by flags.
+ *
+ * Results:
+ * A (ByteCode *) is returned pointing to the resulting ByteCode.
+ * The caller must manage its refCount and arrange for a call to
+ * TclCleanupByteCode() when the last reference disappears.
+ *
+ * Side effects:
+ * The Tcl_ObjType of objPtr is changed to the "substcode" type, and the
+ * ByteCode and governing flags value are kept in the internal rep for
+ * faster operations the next time CompileSubstObj is called on the same
+ * value.
+ *
+ *----------------------------------------------------------------------
+ */
+
+static ByteCode *
+CompileSubstObj(
+ Tcl_Interp *interp,
+ Tcl_Obj *objPtr,
+ int flags)
+{
+ Interp *iPtr = (Interp *) interp;
+ ByteCode *codePtr = NULL;
+
+ if (objPtr->typePtr == &substCodeType) {
+ Namespace *nsPtr = iPtr->varFramePtr->nsPtr;
+
+ codePtr = objPtr->internalRep.ptrAndLongRep.ptr;
+ if ((unsigned long)flags != objPtr->internalRep.ptrAndLongRep.value
+ || ((Interp *) *codePtr->interpHandle != iPtr)
+ || (codePtr->compileEpoch != iPtr->compileEpoch)
+ || (codePtr->nsPtr != nsPtr)
+ || (codePtr->nsEpoch != nsPtr->resolverEpoch)
+ || (codePtr->localCachePtr !=
+ iPtr->varFramePtr->localCachePtr)) {
+ FreeSubstCodeInternalRep(objPtr);
+ }
+ }
+ if (objPtr->typePtr != &substCodeType) {
+ CompileEnv compEnv;
+ int numBytes;
+ const char *bytes = Tcl_GetStringFromObj(objPtr, &numBytes);
+
+ /* TODO: Check for more TIP 280 */
+ TclInitCompileEnv(interp, &compEnv, bytes, numBytes, NULL, 0);
+
+ TclSubstCompile(interp, bytes, numBytes, flags, 1, &compEnv);
+
+ TclEmitOpcode(INST_DONE, &compEnv);
+ TclInitByteCodeObj(objPtr, &compEnv);
+ objPtr->typePtr = &substCodeType;
+ TclFreeCompileEnv(&compEnv);
+
+ codePtr = objPtr->internalRep.twoPtrValue.ptr1;
+ objPtr->internalRep.ptrAndLongRep.ptr = codePtr;
+ objPtr->internalRep.ptrAndLongRep.value = flags;
+ if (iPtr->varFramePtr->localCachePtr) {
+ codePtr->localCachePtr = iPtr->varFramePtr->localCachePtr;
+ codePtr->localCachePtr->refCount++;
+ }
+#ifdef TCL_COMPILE_DEBUG
+ if (tclTraceCompile >= 2) {
+ TclPrintByteCodeObj(interp, objPtr);
+ fflush(stdout);
+ }
+#endif /* TCL_COMPILE_DEBUG */
+ }
+ return codePtr;
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * FreeSubstCodeInternalRep --
+ *
+ * Part of the substcode Tcl object type implementation. Frees the
+ * storage associated with a substcode object's internal representation
+ * unless its code is actively being executed.
+ *
+ * Results:
+ * None.
+ *
+ * Side effects:
+ * The substcode object's internal rep is marked invalid and its code
+ * gets freed unless the code is actively being executed. In that case
+ * the cleanup is delayed until the last execution of the code completes.
+ *
+ *----------------------------------------------------------------------
+ */
+
+static void
+FreeSubstCodeInternalRep(
+ register Tcl_Obj *objPtr) /* Object whose internal rep to free. */
+{
+ register ByteCode *codePtr = objPtr->internalRep.ptrAndLongRep.ptr;
+
+ objPtr->typePtr = NULL;
+ codePtr->refCount--;
+ if (codePtr->refCount <= 0) {
+ TclCleanupByteCode(codePtr);
+ }
}
static void
@@ -829,8 +1388,6 @@ ReleaseCmdWordData(
ckfree((char *) eclPtr->loc);
}
- Tcl_DeleteHashTable (&eclPtr->litInfo);
-
ckfree((char *) eclPtr);
}
@@ -865,6 +1422,8 @@ TclInitCompileEnv(
{
Interp *iPtr = (Interp *) interp;
+ assert(tclInstructionTable[LAST_INST_OPCODE+1].name == NULL);
+
envPtr->iPtr = iPtr;
envPtr->source = stringPtr;
envPtr->numSrcBytes = numBytes;
@@ -875,11 +1434,11 @@ TclInitCompileEnv(
envPtr->maxExceptDepth = 0;
envPtr->maxStackDepth = 0;
envPtr->currStackDepth = 0;
- TclInitLiteralTable(&(envPtr->localLitTable));
+ TclInitLiteralTable(&envPtr->localLitTable);
envPtr->codeStart = envPtr->staticCodeSpace;
envPtr->codeNext = envPtr->codeStart;
- envPtr->codeEnd = (envPtr->codeStart + COMPILEENV_INIT_CODE_BYTES);
+ envPtr->codeEnd = envPtr->codeStart + COMPILEENV_INIT_CODE_BYTES;
envPtr->mallocedCodeArray = 0;
envPtr->literalArrayPtr = envPtr->staticLiteralSpace;
@@ -888,6 +1447,7 @@ TclInitCompileEnv(
envPtr->mallocedLiteralArray = 0;
envPtr->exceptArrayPtr = envPtr->staticExceptArraySpace;
+ envPtr->exceptAuxArrayPtr = envPtr->staticExAuxArraySpace;
envPtr->exceptArrayNext = 0;
envPtr->exceptArrayEnd = COMPILEENV_INIT_EXCEPT_RANGES;
envPtr->mallocedExceptArray = 0;
@@ -896,6 +1456,7 @@ TclInitCompileEnv(
envPtr->cmdMapEnd = COMPILEENV_INIT_CMD_MAP_SIZE;
envPtr->mallocedCmdMap = 0;
envPtr->atCmdStart = 1;
+ envPtr->expandCount = 0;
/*
* TIP #280: Set up the extended command location information, based on
@@ -906,40 +1467,70 @@ TclInitCompileEnv(
* non-compiling evaluator
*/
- envPtr->extCmdMapPtr = (ExtCmdLoc *) ckalloc(sizeof(ExtCmdLoc));
+ envPtr->extCmdMapPtr = ckalloc(sizeof(ExtCmdLoc));
envPtr->extCmdMapPtr->loc = NULL;
envPtr->extCmdMapPtr->nloc = 0;
envPtr->extCmdMapPtr->nuloc = 0;
envPtr->extCmdMapPtr->path = NULL;
- Tcl_InitHashTable(&envPtr->extCmdMapPtr->litInfo, TCL_ONE_WORD_KEYS);
- if (invoker == NULL ||
- (invoker->type == TCL_LOCATION_EVAL_LIST)) {
- /*
+ if (invoker == NULL) {
+ /*
* Initialize the compiler for relative counting in case of a
* dynamic context.
*/
envPtr->line = 1;
- envPtr->extCmdMapPtr->type =
+ if (iPtr->evalFlags & TCL_EVAL_FILE) {
+ iPtr->evalFlags &= ~TCL_EVAL_FILE;
+ envPtr->extCmdMapPtr->type = TCL_LOCATION_SOURCE;
+
+ if (iPtr->scriptFile) {
+ /*
+ * Normalization here, to have the correct pwd. Should have
+ * negligible impact on performance, as the norm should have
+ * been done already by the 'source' invoking us, and it
+ * caches the result.
+ */
+
+ Tcl_Obj *norm =
+ Tcl_FSGetNormalizedPath(interp, iPtr->scriptFile);
+
+ if (norm == NULL) {
+ /*
+ * Error message in the interp result. No place to put it.
+ * And no place to serve the error itself to either. Fake
+ * a path, empty string.
+ */
+
+ TclNewLiteralStringObj(envPtr->extCmdMapPtr->path, "");
+ } else {
+ envPtr->extCmdMapPtr->path = norm;
+ }
+ } else {
+ TclNewLiteralStringObj(envPtr->extCmdMapPtr->path, "");
+ }
+
+ Tcl_IncrRefCount(envPtr->extCmdMapPtr->path);
+ } else {
+ envPtr->extCmdMapPtr->type =
(envPtr->procPtr ? TCL_LOCATION_PROC : TCL_LOCATION_BC);
+ }
} else {
- /*
+ /*
* Initialize the compiler using the context, making counting absolute
* to that context. Note that the context can be byte code execution.
* In that case we have to fill out the missing pieces (line, path,
* ...) which may make change the type as well.
*/
- CmdFrame* ctxPtr = (CmdFrame *) TclStackAlloc(interp, sizeof(CmdFrame));
+ CmdFrame *ctxPtr = TclStackAlloc(interp, sizeof(CmdFrame));
int pc = 0;
*ctxPtr = *invoker;
-
if (invoker->type == TCL_LOCATION_BC) {
/*
* Note: Type BC => ctx.data.eval.path is not used.
- * ctx.data.tebc.codePtr is used instead.
+ * ctx.data.tebc.codePtr is used instead.
*/
TclGetSrcInfoForPc(ctxPtr);
@@ -959,6 +1550,7 @@ TclInitCompileEnv(
/*
* The reference made by 'TclGetSrcInfoForPc' is dead.
*/
+
Tcl_DecrRefCount(ctxPtr->data.eval.path);
}
} else {
@@ -979,7 +1571,7 @@ TclInitCompileEnv(
* We have a new reference here.
*/
- Tcl_IncrRefCount(ctxPtr->data.eval.path);
+ Tcl_IncrRefCount(envPtr->extCmdMapPtr->path);
}
}
}
@@ -990,12 +1582,11 @@ TclInitCompileEnv(
envPtr->extCmdMapPtr->start = envPtr->line;
/*
- * Initialize the data about invisible continuation lines as empty,
- * i.e. not used. The caller (TclSetByteCodeFromAny) will set this up, if
- * such data is available.
+ * Initialize the data about invisible continuation lines as empty, i.e.
+ * not used. The caller (TclSetByteCodeFromAny) will set this up, if such
+ * data is available.
*/
- envPtr->clLoc = NULL;
envPtr->clNext = NULL;
envPtr->auxDataArrayPtr = envPtr->staticAuxDataArraySpace;
@@ -1030,8 +1621,8 @@ void
TclFreeCompileEnv(
register CompileEnv *envPtr)/* Points to the CompileEnv structure. */
{
- if (envPtr->localLitTable.buckets != envPtr->localLitTable.staticBuckets) {
- ckfree((char *) envPtr->localLitTable.buckets);
+ if (envPtr->localLitTable.buckets != envPtr->localLitTable.staticBuckets){
+ ckfree(envPtr->localLitTable.buckets);
envPtr->localLitTable.buckets = envPtr->localLitTable.staticBuckets;
}
if (envPtr->iPtr) {
@@ -1061,34 +1652,25 @@ TclFreeCompileEnv(
}
}
if (envPtr->mallocedCodeArray) {
- ckfree((char *) envPtr->codeStart);
+ ckfree(envPtr->codeStart);
}
if (envPtr->mallocedLiteralArray) {
- ckfree((char *) envPtr->literalArrayPtr);
+ ckfree(envPtr->literalArrayPtr);
}
if (envPtr->mallocedExceptArray) {
- ckfree((char *) envPtr->exceptArrayPtr);
+ ckfree(envPtr->exceptArrayPtr);
+ ckfree(envPtr->exceptAuxArrayPtr);
}
if (envPtr->mallocedCmdMap) {
- ckfree((char *) envPtr->cmdMapPtr);
+ ckfree(envPtr->cmdMapPtr);
}
if (envPtr->mallocedAuxDataArray) {
- ckfree((char *) envPtr->auxDataArrayPtr);
+ ckfree(envPtr->auxDataArrayPtr);
}
if (envPtr->extCmdMapPtr) {
ReleaseCmdWordData(envPtr->extCmdMapPtr);
envPtr->extCmdMapPtr = NULL;
}
-
- /*
- * If we used data about invisible continuation lines, then now is the
- * time to release on our hold on it. The lock was set in function
- * TclSetByteCodeFromAny(), found in this file.
- */
-
- if (envPtr->clLoc) {
- Tcl_Release (envPtr->clLoc);
- }
}
/*
@@ -1151,6 +1733,7 @@ TclWordKnownAtCompileTime(
char utfBuf[TCL_UTF_MAX];
int length = TclParseBackslash(tokenPtr->start,
tokenPtr->size, NULL, utfBuf);
+
Tcl_AppendToObj(tempPtr, utfBuf, length);
}
break;
@@ -1188,451 +1771,467 @@ TclWordKnownAtCompileTime(
*----------------------------------------------------------------------
*/
+static int
+ExpandRequested(
+ Tcl_Token *tokenPtr,
+ int numWords)
+{
+ /* Determine whether any words of the command require expansion */
+ while (numWords--) {
+ if (tokenPtr->type == TCL_TOKEN_EXPAND_WORD) {
+ return 1;
+ }
+ tokenPtr = TokenAfter(tokenPtr);
+ }
+ return 0;
+}
+
+static void
+CompileCmdLiteral(
+ Tcl_Interp *interp,
+ Tcl_Obj *cmdObj,
+ CompileEnv *envPtr)
+{
+ int numBytes;
+ const char *bytes = Tcl_GetStringFromObj(cmdObj, &numBytes);
+ int cmdLitIdx = TclRegisterNewCmdLiteral(envPtr, bytes, numBytes);
+ Command *cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, cmdObj);
+
+ if (cmdPtr) {
+ TclSetCmdNameObj(interp, TclFetchLiteral(envPtr, cmdLitIdx), cmdPtr);
+ }
+ TclEmitPush(cmdLitIdx, envPtr);
+}
+
void
-TclCompileScript(
- Tcl_Interp *interp, /* Used for error and status reporting. Also
- * serves as context for finding and compiling
- * commands. May not be NULL. */
- const char *script, /* The source script to compile. */
- int numBytes, /* Number of bytes in script. If < 0, the
- * script consists of all bytes up to the
- * first null character. */
- CompileEnv *envPtr) /* Holds resulting instructions. */
+TclCompileInvocation(
+ Tcl_Interp *interp,
+ Tcl_Token *tokenPtr,
+ Tcl_Obj *cmdObj,
+ int numWords,
+ CompileEnv *envPtr)
{
- Interp *iPtr = (Interp *) interp;
- int lastTopLevelCmdIndex = -1;
- /* Index of most recent toplevel command in
- * the command location table. Initialized to
- * avoid compiler warning. */
- int startCodeOffset = -1; /* Offset of first byte of current command's
- * code. Init. to avoid compiler warning. */
- unsigned char *entryCodeNext = envPtr->codeNext;
- const char *p, *next;
- Namespace *cmdNsPtr;
- Command *cmdPtr;
- Tcl_Token *tokenPtr;
- int bytesLeft, isFirstCmd, wordIdx, currCmdIndex;
- int commandLength, objIndex;
- Tcl_DString ds;
- /* TIP #280 */
- ExtCmdLoc *eclPtr = envPtr->extCmdMapPtr;
- int *wlines, wlineat, cmdLine;
- int* clNext;
- Tcl_Parse *parsePtr = (Tcl_Parse *)
- TclStackAlloc(interp, sizeof(Tcl_Parse));
+ int wordIdx = 0, depth = TclGetStackDepth(envPtr);
+ DefineLineInformation;
- if (envPtr->iPtr == NULL) {
- Tcl_Panic("TclCompileScript() called on uninitialized CompileEnv");
+ if (cmdObj) {
+ CompileCmdLiteral(interp, cmdObj, envPtr);
+ wordIdx = 1;
+ tokenPtr = TokenAfter(tokenPtr);
}
- Tcl_DStringInit(&ds);
+ for (; wordIdx < numWords; wordIdx++, tokenPtr = TokenAfter(tokenPtr)) {
+ int objIdx;
+
+ SetLineInformation(wordIdx);
+
+ if (tokenPtr->type != TCL_TOKEN_SIMPLE_WORD) {
+ CompileTokens(envPtr, tokenPtr, interp);
+ continue;
+ }
- if (numBytes < 0) {
- numBytes = strlen(script);
+ objIdx = TclRegisterNewLiteral(envPtr,
+ tokenPtr[1].start, tokenPtr[1].size);
+ if (envPtr->clNext) {
+ TclContinuationsEnterDerived(TclFetchLiteral(envPtr, objIdx),
+ tokenPtr[1].start - envPtr->source, envPtr->clNext);
+ }
+ TclEmitPush(objIdx, envPtr);
}
- Tcl_ResetResult(interp);
- isFirstCmd = 1;
- if (envPtr->procPtr != NULL) {
- cmdNsPtr = envPtr->procPtr->cmdPtr->nsPtr;
+ if (wordIdx <= 255) {
+ TclEmitInvoke(envPtr, INST_INVOKE_STK1, wordIdx);
} else {
- cmdNsPtr = NULL; /* use current NS */
+ TclEmitInvoke(envPtr, INST_INVOKE_STK4, wordIdx);
+ }
+ TclCheckStackDepth(depth+1, envPtr);
+}
+
+static void
+CompileExpanded(
+ Tcl_Interp *interp,
+ Tcl_Token *tokenPtr,
+ Tcl_Obj *cmdObj,
+ int numWords,
+ CompileEnv *envPtr)
+{
+ int wordIdx = 0;
+ DefineLineInformation;
+ int depth = TclGetStackDepth(envPtr);
+
+ StartExpanding(envPtr);
+ if (cmdObj) {
+ CompileCmdLiteral(interp, cmdObj, envPtr);
+ wordIdx = 1;
+ tokenPtr = TokenAfter(tokenPtr);
+ }
+
+ for (; wordIdx < numWords; wordIdx++, tokenPtr = TokenAfter(tokenPtr)) {
+ int objIdx;
+
+ SetLineInformation(wordIdx);
+
+ if (tokenPtr->type != TCL_TOKEN_SIMPLE_WORD) {
+ CompileTokens(envPtr, tokenPtr, interp);
+ if (tokenPtr->type == TCL_TOKEN_EXPAND_WORD) {
+ TclEmitInstInt4(INST_EXPAND_STKTOP,
+ envPtr->currStackDepth, envPtr);
+ }
+ continue;
+ }
+
+ objIdx = TclRegisterNewLiteral(envPtr,
+ tokenPtr[1].start, tokenPtr[1].size);
+ if (envPtr->clNext) {
+ TclContinuationsEnterDerived(TclFetchLiteral(envPtr, objIdx),
+ tokenPtr[1].start - envPtr->source, envPtr->clNext);
+ }
+ TclEmitPush(objIdx, envPtr);
}
/*
- * Each iteration through the following loop compiles the next command
- * from the script.
+ * The stack depth during argument expansion can only be managed at
+ * runtime, as the number of elements in the expanded lists is not known
+ * at compile time. We adjust here the stack depth estimate so that it is
+ * correct after the command with expanded arguments returns.
+ *
+ * The end effect of this command's invocation is that all the words of
+ * the command are popped from the stack, and the result is pushed: the
+ * stack top changes by (1-wordIdx).
+ *
+ * Note that the estimates are not correct while the command is being
+ * prepared and run, INST_EXPAND_STKTOP is not stack-neutral in general.
*/
- p = script;
- bytesLeft = numBytes;
- cmdLine = envPtr->line;
- clNext = envPtr->clNext;
- do {
- if (Tcl_ParseCommand(interp, p, bytesLeft, 0, parsePtr) != TCL_OK) {
- /*
- * Compile bytecodes to report the parse error at runtime.
- */
+ TclEmitInvoke(envPtr, INST_INVOKE_EXPANDED, wordIdx);
+ TclCheckStackDepth(depth+1, envPtr);
+}
- Tcl_LogCommandInfo(interp, script, parsePtr->commandStart,
- /* Drop the command terminator (";","]") if appropriate */
- (parsePtr->term ==
- parsePtr->commandStart + parsePtr->commandSize - 1)?
- parsePtr->commandSize - 1 : parsePtr->commandSize);
- TclCompileSyntaxError(interp, envPtr);
- break;
+static int
+CompileCmdCompileProc(
+ Tcl_Interp *interp,
+ Tcl_Parse *parsePtr,
+ Command *cmdPtr,
+ CompileEnv *envPtr)
+{
+ int unwind = 0, incrOffset = -1;
+ DefineLineInformation;
+ int depth = TclGetStackDepth(envPtr);
+
+ /*
+ * Emit of the INST_START_CMD instruction is controlled by the value of
+ * envPtr->atCmdStart:
+ *
+ * atCmdStart == 2 : We are not using the INST_START_CMD instruction.
+ * atCmdStart == 1 : INST_START_CMD was the last instruction emitted.
+ * : We do not need to emit another. Instead we
+ * : increment the number of cmds started at it (except
+ * : for the special case at the start of a script.)
+ * atCmdStart == 0 : The last instruction was something else. We need
+ * : to emit INST_START_CMD here.
+ */
+
+ switch (envPtr->atCmdStart) {
+ case 0:
+ unwind = tclInstructionTable[INST_START_CMD].numBytes;
+ TclEmitInstInt4(INST_START_CMD, 0, envPtr);
+ incrOffset = envPtr->codeNext - envPtr->codeStart;
+ TclEmitInt4(0, envPtr);
+ break;
+ case 1:
+ if (envPtr->codeNext > envPtr->codeStart) {
+ incrOffset = envPtr->codeNext - 4 - envPtr->codeStart;
}
- if (parsePtr->numWords > 0) {
- int expand = 0; /* Set if there are dynamic expansions to
- * handle */
+ break;
+ case 2:
+ /* Nothing to do */
+ ;
+ }
+ if (TCL_OK == TclAttemptCompileProc(interp, parsePtr, 1, cmdPtr, envPtr)) {
+ if (incrOffset >= 0) {
/*
- * If not the first command, pop the previous command's result
- * and, if we're compiling a top level command, update the last
- * command's code size to account for the pop instruction.
+ * We successfully compiled a command. Increment the number of
+ * commands that start at the currently active INST_START_CMD.
*/
- if (!isFirstCmd) {
- TclEmitOpcode(INST_POP, envPtr);
- envPtr->cmdMapPtr[lastTopLevelCmdIndex].numCodeBytes =
- (envPtr->codeNext - envPtr->codeStart)
- - startCodeOffset;
+ unsigned char *incrPtr = envPtr->codeStart + incrOffset;
+ unsigned char *startPtr = incrPtr - 5;
+
+ TclIncrUInt4AtPtr(incrPtr, 1);
+ if (unwind) {
+ /* We started the INST_START_CMD. Record the code length. */
+ TclStoreInt4AtPtr(envPtr->codeNext - startPtr, startPtr + 1);
}
+ }
+ TclCheckStackDepth(depth+1, envPtr);
+ return TCL_OK;
+ }
- /*
- * Determine the actual length of the command.
- */
+ envPtr->codeNext -= unwind; /* Unwind INST_START_CMD */
- commandLength = parsePtr->commandSize;
- if (parsePtr->term == parsePtr->commandStart + commandLength - 1) {
- /*
- * The command terminator character (such as ; or ]) is the
- * last character in the parsed command. Reduce the length by
- * one so that the trace message doesn't include the
- * terminator character.
- */
+ /*
+ * Throw out any line information generated by the failed compile attempt.
+ */
- commandLength -= 1;
- }
+ while (mapPtr->nuloc - 1 > eclIndex) {
+ mapPtr->nuloc--;
+ ckfree(mapPtr->loc[mapPtr->nuloc].line);
+ mapPtr->loc[mapPtr->nuloc].line = NULL;
+ }
-#ifdef TCL_COMPILE_DEBUG
- /*
- * If tracing, print a line for each top level command compiled.
- */
+ /*
+ * Reset the index of next command. Toss out any from failed nested
+ * partial compiles.
+ */
- if ((tclTraceCompile >= 1) && (envPtr->procPtr == NULL)) {
- fprintf(stdout, " Compiling: ");
- TclPrintSource(stdout, parsePtr->commandStart,
- TclMin(commandLength, 55));
- fprintf(stdout, "\n");
- }
-#endif
+ envPtr->numCommands = mapPtr->nuloc;
+ return TCL_ERROR;
+}
- /*
- * Check whether expansion has been requested for any of the
- * words.
- */
+static int
+CompileCommandTokens(
+ Tcl_Interp *interp,
+ Tcl_Parse *parsePtr,
+ CompileEnv *envPtr)
+{
+ Interp *iPtr = (Interp *) interp;
+ Tcl_Token *tokenPtr = parsePtr->tokenPtr;
+ ExtCmdLoc *eclPtr = envPtr->extCmdMapPtr;
+ Tcl_Obj *cmdObj = Tcl_NewObj();
+ Command *cmdPtr = NULL;
+ int code = TCL_ERROR;
+ int cmdKnown, expand = -1;
+ int *wlines, wlineat;
+ int cmdLine = envPtr->line;
+ int *clNext = envPtr->clNext;
+ int cmdIdx = envPtr->numCommands;
+ int startCodeOffset = envPtr->codeNext - envPtr->codeStart;
+ int depth = TclGetStackDepth(envPtr);
+
+ assert (parsePtr->numWords > 0);
+
+ /* Pre-Compile */
+
+ envPtr->numCommands++;
+ EnterCmdStartData(envPtr, cmdIdx,
+ parsePtr->commandStart - envPtr->source, startCodeOffset);
- for (wordIdx = 0, tokenPtr = parsePtr->tokenPtr;
- wordIdx < parsePtr->numWords;
- wordIdx++, tokenPtr += (tokenPtr->numComponents + 1)) {
- if (tokenPtr->type == TCL_TOKEN_EXPAND_WORD) {
- expand = 1;
- break;
- }
- }
+ /*
+ * TIP #280. Scan the words and compute the extended location information.
+ * The map first contain full per-word line information for use by the
+ * compiler. This is later replaced by a reduced form which signals
+ * non-literal words, stored in 'wlines'.
+ */
- envPtr->numCommands++;
- currCmdIndex = (envPtr->numCommands - 1);
- lastTopLevelCmdIndex = currCmdIndex;
- startCodeOffset = (envPtr->codeNext - envPtr->codeStart);
- EnterCmdStartData(envPtr, currCmdIndex,
- parsePtr->commandStart - envPtr->source, startCodeOffset);
+ EnterCmdWordData(eclPtr, parsePtr->commandStart - envPtr->source,
+ parsePtr->tokenPtr, parsePtr->commandStart,
+ parsePtr->commandSize, parsePtr->numWords, cmdLine,
+ clNext, &wlines, envPtr);
+ wlineat = eclPtr->nuloc - 1;
- /*
- * Should only start issuing instructions after the "command has
- * started" so that the command range is correct in the bytecode.
- */
+ envPtr->line = eclPtr->loc[wlineat].line[0];
+ envPtr->clNext = eclPtr->loc[wlineat].next[0];
- if (expand) {
- TclEmitOpcode(INST_EXPAND_START, envPtr);
- }
+ /* Do we know the command word? */
+ Tcl_IncrRefCount(cmdObj);
+ tokenPtr = parsePtr->tokenPtr;
+ cmdKnown = TclWordKnownAtCompileTime(tokenPtr, cmdObj);
+ /* Is this a command we should (try to) compile with a compileProc ? */
+ if (cmdKnown && !(iPtr->flags & DONT_COMPILE_CMDS_INLINE)) {
+ cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, cmdObj);
+ if (cmdPtr) {
/*
- * TIP #280. Scan the words and compute the extended location
- * information. The map first contain full per-word line
- * information for use by the compiler. This is later replaced by
- * a reduced form which signals non-literal words, stored in
- * 'wlines'.
+ * Found a command. Test the ways we can be told not to attempt
+ * to compile it.
*/
+ if ((cmdPtr->compileProc == NULL)
+ || (cmdPtr->nsPtr->flags & NS_SUPPRESS_COMPILATION)
+ || (cmdPtr->flags & CMD_HAS_EXEC_TRACES)) {
+ cmdPtr = NULL;
+ }
+ }
+ if (cmdPtr && !(cmdPtr->flags & CMD_COMPILES_EXPANDED)) {
+ expand = ExpandRequested(parsePtr->tokenPtr, parsePtr->numWords);
+ if (expand) {
+ /* We need to expand, but compileProc cannot. */
+ cmdPtr = NULL;
+ }
+ }
+ }
- TclAdvanceLines(&cmdLine, p, parsePtr->commandStart);
- TclAdvanceContinuations (&cmdLine, &clNext,
- parsePtr->commandStart - envPtr->source);
- EnterCmdWordData(eclPtr, parsePtr->commandStart - envPtr->source,
- parsePtr->tokenPtr, parsePtr->commandStart,
- parsePtr->commandSize, parsePtr->numWords, cmdLine,
- clNext, &wlines, envPtr);
- wlineat = eclPtr->nuloc - 1;
+ /* If cmdPtr != NULL, we will try to call cmdPtr->compileProc */
+ if (cmdPtr) {
+ code = CompileCmdCompileProc(interp, parsePtr, cmdPtr, envPtr);
+ }
- /*
- * Each iteration of the following loop compiles one word from the
- * command.
- */
+ if (code == TCL_ERROR) {
+ if (expand < 0) {
+ expand = ExpandRequested(parsePtr->tokenPtr, parsePtr->numWords);
+ }
- for (wordIdx = 0, tokenPtr = parsePtr->tokenPtr;
- wordIdx < parsePtr->numWords; wordIdx++,
- tokenPtr += (tokenPtr->numComponents + 1)) {
+ if (expand) {
+ CompileExpanded(interp, parsePtr->tokenPtr,
+ cmdKnown ? cmdObj : NULL, parsePtr->numWords, envPtr);
+ } else {
+ TclCompileInvocation(interp, parsePtr->tokenPtr,
+ cmdKnown ? cmdObj : NULL, parsePtr->numWords, envPtr);
+ }
+ }
- envPtr->line = eclPtr->loc[wlineat].line[wordIdx];
- envPtr->clNext = eclPtr->loc [wlineat].next [wordIdx];
+ Tcl_DecrRefCount(cmdObj);
- if (tokenPtr->type != TCL_TOKEN_SIMPLE_WORD) {
- /*
- * The word is not a simple string of characters.
- */
+ TclEmitOpcode(INST_POP, envPtr);
+ EnterCmdExtentData(envPtr, cmdIdx,
+ parsePtr->term - parsePtr->commandStart,
+ (envPtr->codeNext-envPtr->codeStart) - startCodeOffset);
- TclCompileTokens(interp, tokenPtr+1,
- tokenPtr->numComponents, envPtr);
- if (tokenPtr->type == TCL_TOKEN_EXPAND_WORD) {
- TclEmitInstInt4(INST_EXPAND_STKTOP,
- envPtr->currStackDepth, envPtr);
- }
- continue;
- }
+ /*
+ * TIP #280: Free full form of per-word line data and insert the reduced
+ * form now
+ */
- /*
- * This is a simple string of literal characters (i.e. we know
- * it absolutely and can use it directly). If this is the
- * first word and the command has a compile procedure, let it
- * compile the command.
- */
+ envPtr->line = cmdLine;
+ envPtr->clNext = clNext;
+ ckfree(eclPtr->loc[wlineat].line);
+ ckfree(eclPtr->loc[wlineat].next);
+ eclPtr->loc[wlineat].line = wlines;
+ eclPtr->loc[wlineat].next = NULL;
- if ((wordIdx == 0) && !expand) {
- /*
- * We copy the string before trying to find the command by
- * name. We used to modify the string in place, but this
- * is not safe because the name resolution handlers could
- * have side effects that rely on the unmodified string.
- */
+ TclCheckStackDepth(depth, envPtr);
+ return cmdIdx;
+}
- Tcl_DStringSetLength(&ds, 0);
- Tcl_DStringAppend(&ds, tokenPtr[1].start,tokenPtr[1].size);
-
- cmdPtr = (Command *) Tcl_FindCommand(interp,
- Tcl_DStringValue(&ds),
- (Tcl_Namespace *) cmdNsPtr, /*flags*/ 0);
-
- if ((cmdPtr != NULL)
- && (cmdPtr->compileProc != NULL)
- && !(cmdPtr->flags & CMD_HAS_EXEC_TRACES)
- && !(iPtr->flags & DONT_COMPILE_CMDS_INLINE)) {
- int savedNumCmds = envPtr->numCommands;
- unsigned savedCodeNext =
- envPtr->codeNext - envPtr->codeStart;
- int update = 0, code;
-
- /*
- * Mark the start of the command; the proper bytecode
- * length will be updated later. There is no need to
- * do this for the first bytecode in the compile env,
- * as the check is done before calling
- * TclExecuteByteCode(). Do emit an INST_START_CMD in
- * special cases where the first bytecode is in a
- * loop, to insure that the corresponding command is
- * counted properly. Compilers for commands able to
- * produce such a beast (currently 'while 1' only) set
- * envPtr->atCmdStart to 0 in order to signal this
- * case. [Bug 1752146]
- *
- * Note that the environment is initialised with
- * atCmdStart=1 to avoid emitting ISC for the first
- * command.
- */
-
- if (envPtr->atCmdStart) {
- if (savedCodeNext != 0) {
- /*
- * Increase the number of commands being
- * started at the current point. Note that
- * this depends on the exact layout of the
- * INST_START_CMD's operands, so be careful!
- */
-
- unsigned char *fixPtr = envPtr->codeNext - 4;
-
- TclStoreInt4AtPtr(TclGetUInt4AtPtr(fixPtr)+1,
- fixPtr);
- }
- } else {
- TclEmitInstInt4(INST_START_CMD, 0, envPtr);
- TclEmitInt4(1, envPtr);
- update = 1;
- }
-
- code = (cmdPtr->compileProc)(interp, parsePtr,
- cmdPtr, envPtr);
-
- if (code == TCL_OK) {
- if (update) {
- /*
- * Fix the bytecode length.
- */
-
- unsigned char *fixPtr = envPtr->codeStart
- + savedCodeNext + 1;
- unsigned fixLen = envPtr->codeNext
- - envPtr->codeStart - savedCodeNext;
-
- TclStoreInt4AtPtr(fixLen, fixPtr);
- }
- goto finishCommand;
- } else {
- if (envPtr->atCmdStart && savedCodeNext != 0) {
- /*
- * Decrease the number of commands being
- * started at the current point. Note that
- * this depends on the exact layout of the
- * INST_START_CMD's operands, so be careful!
- */
-
- unsigned char *fixPtr = envPtr->codeNext - 4;
-
- TclStoreInt4AtPtr(TclGetUInt4AtPtr(fixPtr)-1,
- fixPtr);
- }
-
- /*
- * Restore numCommands and codeNext to their
- * correct values, removing any commands compiled
- * before the failure to produce bytecode got
- * reported. [Bugs 705406 and 735055]
- */
-
- envPtr->numCommands = savedNumCmds;
- envPtr->codeNext = envPtr->codeStart+savedCodeNext;
- }
- }
+void
+TclCompileScript(
+ Tcl_Interp *interp, /* Used for error and status reporting. Also
+ * serves as context for finding and compiling
+ * commands. May not be NULL. */
+ const char *script, /* The source script to compile. */
+ int numBytes, /* Number of bytes in script. If < 0, the
+ * script consists of all bytes up to the
+ * first null character. */
+ CompileEnv *envPtr) /* Holds resulting instructions. */
+{
+ int lastCmdIdx = -1; /* Index into envPtr->cmdMapPtr of the last
+ * command this routine compiles into bytecode.
+ * Initial value of -1 indicates this routine
+ * has not yet generated any bytecode. */
+ const char *p = script; /* Where we are in our compile. */
+ int depth = TclGetStackDepth(envPtr);
- /*
- * No compile procedure so push the word. If the command
- * was found, push a CmdName object to reduce runtime
- * lookups. Avoid sharing this literal among different
- * namespaces to reduce shimmering.
- */
+ if (envPtr->iPtr == NULL) {
+ Tcl_Panic("TclCompileScript() called on uninitialized CompileEnv");
+ }
- objIndex = TclRegisterNewNSLiteral(envPtr,
- tokenPtr[1].start, tokenPtr[1].size);
- if (cmdPtr != NULL) {
- TclSetCmdNameObj(interp,
- envPtr->literalArrayPtr[objIndex].objPtr,cmdPtr);
- }
- if ((wordIdx == 0) && (parsePtr->numWords == 1)) {
- /*
- * Single word script: unshare the command name to
- * avoid shimmering between bytecode and cmdName
- * representations [Bug 458361]
- */
-
- TclHideLiteral(interp, envPtr, objIndex);
- }
- } else {
- /*
- * Simple argument word of a command. We reach this if and
- * only if the command word was not compiled for whatever
- * reason. Register the literal's location for use by
- * uplevel, etc. commands, should they encounter it
- * unmodified. We care only if the we are in a context
- * which already allows absolute counting.
- */
- objIndex = TclRegisterNewLiteral(envPtr,
- tokenPtr[1].start, tokenPtr[1].size);
+ /* Each iteration compiles one command from the script. */
- if (envPtr->clNext) {
- TclContinuationsEnterDerived (envPtr->literalArrayPtr[objIndex].objPtr,
- tokenPtr[1].start - envPtr->source,
- eclPtr->loc [wlineat].next [wordIdx]);
- }
- }
- TclEmitPush(objIndex, envPtr);
- } /* for loop */
+ while (numBytes > 0) {
+ Tcl_Parse parse;
+ const char *next;
+ if (TCL_OK != Tcl_ParseCommand(interp, p, numBytes, 0, &parse)) {
/*
- * Emit an invoke instruction for the command. We skip this if a
- * compile procedure was found for the command.
+ * Compile bytecodes to report the parse error at runtime.
*/
- if (expand) {
- /*
- * The stack depth during argument expansion can only be
- * managed at runtime, as the number of elements in the
- * expanded lists is not known at compile time. We adjust here
- * the stack depth estimate so that it is correct after the
- * command with expanded arguments returns.
- *
- * The end effect of this command's invocation is that all the
- * words of the command are popped from the stack, and the
- * result is pushed: the stack top changes by (1-wordIdx).
- *
- * Note that the estimates are not correct while the command
- * is being prepared and run, INST_EXPAND_STKTOP is not
- * stack-neutral in general.
- */
+ Tcl_LogCommandInfo(interp, script, parse.commandStart,
+ parse.term + 1 - parse.commandStart);
+ TclCompileSyntaxError(interp, envPtr);
+ return;
+ }
- TclEmitOpcode(INST_INVOKE_EXPANDED, envPtr);
- TclAdjustStackDepth((1-wordIdx), envPtr);
- } else if (wordIdx > 0) {
- /*
- * Save PC -> command map for the TclArgumentBC* functions.
- */
+#ifdef TCL_COMPILE_DEBUG
+ /*
+ * If tracing, print a line for each top level command compiled.
+ * TODO: Suppress when numWords == 0 ?
+ */
- int isnew;
- Tcl_HashEntry* hePtr = Tcl_CreateHashEntry(&eclPtr->litInfo,
- (char*) (envPtr->codeNext - envPtr->codeStart), &isnew);
- Tcl_SetHashValue(hePtr, INT2PTR(wlineat));
+ if ((tclTraceCompile >= 1) && (envPtr->procPtr == NULL)) {
+ int commandLength = parse.term - parse.commandStart;
+ fprintf(stdout, " Compiling: ");
+ TclPrintSource(stdout, parse.commandStart,
+ TclMin(commandLength, 55));
+ fprintf(stdout, "\n");
+ }
+#endif
- if (wordIdx <= 255) {
- TclEmitInstInt1(INST_INVOKE_STK1, wordIdx, envPtr);
- } else {
- TclEmitInstInt4(INST_INVOKE_STK4, wordIdx, envPtr);
- }
- }
+ /*
+ * TIP #280: Count newlines before the command start.
+ * (See test info-30.33).
+ */
- /*
- * Update the compilation environment structure and record the
- * offsets of the source and code for the command.
- */
+ TclAdvanceLines(&envPtr->line, p, parse.commandStart);
+ TclAdvanceContinuations(&envPtr->line, &envPtr->clNext,
+ parse.commandStart - envPtr->source);
- finishCommand:
- EnterCmdExtentData(envPtr, currCmdIndex, commandLength,
- (envPtr->codeNext-envPtr->codeStart) - startCodeOffset);
- isFirstCmd = 0;
+ /*
+ * Advance parser to the next command in the script.
+ */
+ next = parse.commandStart + parse.commandSize;
+ numBytes -= next - p;
+ p = next;
+
+ if (parse.numWords == 0) {
/*
- * TIP #280: Free full form of per-word line data and insert the
- * reduced form now
+ * The "command" parsed has no words. In this case we can skip
+ * the rest of the loop body. With no words, clearly
+ * CompileCommandTokens() has nothing to do. Since the parser
+ * aggressively sucks up leading comment and white space,
+ * including newlines, parse.commandStart must be pointing at
+ * either the end of script, or a command-terminating semi-colon.
+ * In either case, the TclAdvance*() calls have nothing to do.
+ * Finally, when no words are parsed, no tokens have been
+ * allocated at parse.tokenPtr so there's also nothing for
+ * Tcl_FreeParse() to do.
+ *
+ * The advantage of this shortcut is that CompileCommandTokens()
+ * can be written with an assumption that parse.numWords > 0, with
+ * the implication the CCT() always generates bytecode.
*/
+ continue;
+ }
- ckfree((char *) eclPtr->loc[wlineat].line);
- ckfree((char *) eclPtr->loc[wlineat].next);
- eclPtr->loc[wlineat].line = wlines;
- eclPtr->loc[wlineat].next = NULL;
- } /* end if parsePtr->numWords > 0 */
+ lastCmdIdx = CompileCommandTokens(interp, &parse, envPtr);
/*
- * Advance to the next command in the script.
+ * TIP #280: Track lines in the just compiled command.
*/
- next = parsePtr->commandStart + parsePtr->commandSize;
- bytesLeft -= next - p;
- p = next;
+ TclAdvanceLines(&envPtr->line, parse.commandStart, p);
+ TclAdvanceContinuations(&envPtr->line, &envPtr->clNext,
+ p - envPtr->source);
+ Tcl_FreeParse(&parse);
+ }
+ if (lastCmdIdx == -1) {
/*
- * TIP #280: Track lines in the just compiled command.
+ * Compiling the script yielded no bytecode. The script must be all
+ * whitespace, comments, and empty commands. Such scripts are defined
+ * to successfully produce the empty string result, so we emit the
+ * simple bytecode that makes that happen.
*/
- TclAdvanceLines(&cmdLine, parsePtr->commandStart, p);
- TclAdvanceContinuations (&cmdLine, &clNext, p - envPtr->source);
- Tcl_FreeParse(parsePtr);
- } while (bytesLeft > 0);
-
- /*
- * If the source script yielded no instructions (e.g., if it was empty),
- * push an empty string as the command's result.
- *
- * WARNING: push an unshared object! If the script being compiled is a
- * shared empty string, it will otherwise be self-referential and cause
- * difficulties with literal management [Bugs 467523, 983660]. We used to
- * have special code in TclReleaseLiteral to handle this particular
- * self-reference, but now opt for avoiding its creation altogether.
- */
+ PushStringLiteral(envPtr, "");
+ } else {
+ /*
+ * We compiled at least one command to bytecode. The routine
+ * CompileCommandTokens() follows the bytecode of each compiled
+ * command with an INST_POP, so that stack balance is maintained when
+ * several commands are in sequence. (The result of each command is
+ * thrown away before moving on to the next command). For the last
+ * command compiled, we need to undo that INST_POP so that the result
+ * of the last command becomes the result of the script. The code
+ * here removes that trailing INST_POP.
+ */
- if (envPtr->codeNext == entryCodeNext) {
- TclEmitPush(TclAddLiteralObj(envPtr, Tcl_NewObj(), NULL), envPtr);
+ envPtr->cmdMapPtr[lastCmdIdx].numCodeBytes--;
+ envPtr->codeNext--;
+ envPtr->currStackDepth++;
}
-
- TclStackFree(interp, parsePtr);
- Tcl_DStringFree(&ds);
+ TclCheckStackDepth(depth+1, envPtr);
}
/*
@@ -1657,6 +2256,76 @@ TclCompileScript(
*/
void
+TclCompileVarSubst(
+ Tcl_Interp *interp,
+ Tcl_Token *tokenPtr,
+ CompileEnv *envPtr)
+{
+ const char *p, *name = tokenPtr[1].start;
+ int nameBytes = tokenPtr[1].size;
+ int i, localVar, localVarName = 1;
+
+ /*
+ * Determine how the variable name should be handled: if it contains any
+ * namespace qualifiers it is not a local variable (localVarName=-1); if
+ * it looks like an array element and the token has a single component, it
+ * should not be created here [Bug 569438] (localVarName=0); otherwise,
+ * the local variable can safely be created (localVarName=1).
+ */
+
+ for (i = 0, p = name; i < nameBytes; i++, p++) {
+ if ((*p == ':') && (i < nameBytes-1) && (*(p+1) == ':')) {
+ localVarName = -1;
+ break;
+ } else if ((*p == '(')
+ && (tokenPtr->numComponents == 1)
+ && (*(name + nameBytes - 1) == ')')) {
+ localVarName = 0;
+ break;
+ }
+ }
+
+ /*
+ * Either push the variable's name, or find its index in the array
+ * of local variables in a procedure frame.
+ */
+
+ localVar = -1;
+ if (localVarName != -1) {
+ localVar = TclFindCompiledLocal(name, nameBytes, localVarName, envPtr);
+ }
+ if (localVar < 0) {
+ PushLiteral(envPtr, name, nameBytes);
+ }
+
+ /*
+ * Emit instructions to load the variable.
+ */
+
+ TclAdvanceLines(&envPtr->line, tokenPtr[1].start,
+ tokenPtr[1].start + tokenPtr[1].size);
+
+ if (tokenPtr->numComponents == 1) {
+ if (localVar < 0) {
+ TclEmitOpcode(INST_LOAD_STK, envPtr);
+ } else if (localVar <= 255) {
+ TclEmitInstInt1(INST_LOAD_SCALAR1, localVar, envPtr);
+ } else {
+ TclEmitInstInt4(INST_LOAD_SCALAR4, localVar, envPtr);
+ }
+ } else {
+ TclCompileTokens(interp, tokenPtr+2, tokenPtr->numComponents-1, envPtr);
+ if (localVar < 0) {
+ TclEmitOpcode(INST_LOAD_ARRAY_STK, envPtr);
+ } else if (localVar <= 255) {
+ TclEmitInstInt1(INST_LOAD_ARRAY1, localVar, envPtr);
+ } else {
+ TclEmitInstInt4(INST_LOAD_ARRAY4, localVar, envPtr);
+ }
+ }
+}
+
+void
TclCompileTokens(
Tcl_Interp *interp, /* Used for error and status reporting. */
Tcl_Token *tokenPtr, /* Pointer to first in an array of tokens to
@@ -1668,52 +2337,53 @@ TclCompileTokens(
Tcl_DString textBuffer; /* Holds concatenated chars from adjacent
* TCL_TOKEN_TEXT, TCL_TOKEN_BS tokens. */
char buffer[TCL_UTF_MAX];
- const char *name, *p;
- int numObjsToConcat, nameBytes, localVarName, localVar;
- int length, i;
+ int i, numObjsToConcat, length, adjust;
unsigned char *entryCodeNext = envPtr->codeNext;
#define NUM_STATIC_POS 20
int isLiteral, maxNumCL, numCL;
- int* clPosition = NULL;
+ int *clPosition = NULL;
+ int depth = TclGetStackDepth(envPtr);
/*
* For the handling of continuation lines in literals we first check if
* this is actually a literal. For if not we can forego the additional
* processing. Otherwise we pre-allocate a small table to store the
- * locations of all continuation lines we find in this literal, if
- * any. The table is extended if needed.
+ * locations of all continuation lines we find in this literal, if any.
+ * The table is extended if needed.
*
- * Note: Different to the equivalent code in function
- * 'TclSubstTokens()' (see file "tclParse.c") we do not seem to need
- * the 'adjust' variable. We also do not seem to need code which merges
- * continuation line information of multiple words which concat'd at
- * runtime. Either that or I have not managed to find a test case for
- * these two possibilities yet. It might be a difference between compile-
- * versus runtime processing.
+ * Note: Different to the equivalent code in function 'TclSubstTokens()'
+ * (see file "tclParse.c") we do not seem to need the 'adjust' variable.
+ * We also do not seem to need code which merges continuation line
+ * information of multiple words which concat'd at runtime. Either that or
+ * I have not managed to find a test case for these two possibilities yet.
+ * It might be a difference between compile- versus run-time processing.
*/
- numCL = 0;
- maxNumCL = 0;
+ numCL = 0;
+ maxNumCL = 0;
isLiteral = 1;
for (i=0 ; i < count; i++) {
- if ((tokenPtr[i].type != TCL_TOKEN_TEXT) &&
- (tokenPtr[i].type != TCL_TOKEN_BS)) {
+ if ((tokenPtr[i].type != TCL_TOKEN_TEXT)
+ && (tokenPtr[i].type != TCL_TOKEN_BS)) {
isLiteral = 0;
break;
}
}
if (isLiteral) {
- maxNumCL = NUM_STATIC_POS;
- clPosition = (int*) ckalloc (maxNumCL*sizeof(int));
+ maxNumCL = NUM_STATIC_POS;
+ clPosition = ckalloc(maxNumCL * sizeof(int));
}
+ adjust = 0;
Tcl_DStringInit(&textBuffer);
numObjsToConcat = 0;
for ( ; count > 0; count--, tokenPtr++) {
switch (tokenPtr->type) {
case TCL_TOKEN_TEXT:
- Tcl_DStringAppend(&textBuffer, tokenPtr->start, tokenPtr->size);
+ TclDStringAppendToken(&textBuffer, tokenPtr);
+ TclAdvanceLines(&envPtr->line, tokenPtr->start,
+ tokenPtr->start + tokenPtr->size);
break;
case TCL_TOKEN_BS:
@@ -1739,16 +2409,17 @@ TclCompileTokens(
if ((length == 1) && (buffer[0] == ' ') &&
(tokenPtr->start[1] == '\n')) {
if (isLiteral) {
- int clPos = Tcl_DStringLength (&textBuffer);
+ int clPos = Tcl_DStringLength(&textBuffer);
if (numCL >= maxNumCL) {
maxNumCL *= 2;
- clPosition = (int*) ckrealloc ((char*)clPosition,
- maxNumCL*sizeof(int));
+ clPosition = ckrealloc(clPosition,
+ maxNumCL * sizeof(int));
}
clPosition[numCL] = clPos;
numCL ++;
}
+ adjust++;
}
break;
@@ -1758,23 +2429,23 @@ TclCompileTokens(
*/
if (Tcl_DStringLength(&textBuffer) > 0) {
- int literal = TclRegisterNewLiteral(envPtr,
- Tcl_DStringValue(&textBuffer),
- Tcl_DStringLength(&textBuffer));
+ int literal = TclRegisterDStringLiteral(envPtr, &textBuffer);
TclEmitPush(literal, envPtr);
numObjsToConcat++;
Tcl_DStringFree(&textBuffer);
if (numCL) {
- TclContinuationsEnter(envPtr->literalArrayPtr[literal].objPtr,
- numCL, clPosition);
+ TclContinuationsEnter(TclFetchLiteral(envPtr, literal),
+ numCL, clPosition);
}
numCL = 0;
}
+ envPtr->line += adjust;
TclCompileScript(interp, tokenPtr->start+1,
tokenPtr->size-2, envPtr);
+ envPtr->line -= adjust;
numObjsToConcat++;
break;
@@ -1786,79 +2457,13 @@ TclCompileTokens(
if (Tcl_DStringLength(&textBuffer) > 0) {
int literal;
- literal = TclRegisterNewLiteral(envPtr,
- Tcl_DStringValue(&textBuffer),
- Tcl_DStringLength(&textBuffer));
+ literal = TclRegisterDStringLiteral(envPtr, &textBuffer);
TclEmitPush(literal, envPtr);
numObjsToConcat++;
Tcl_DStringFree(&textBuffer);
}
- /*
- * Determine how the variable name should be handled: if it
- * contains any namespace qualifiers it is not a local variable
- * (localVarName=-1); if it looks like an array element and the
- * token has a single component, it should not be created here
- * [Bug 569438] (localVarName=0); otherwise, the local variable
- * can safely be created (localVarName=1).
- */
-
- name = tokenPtr[1].start;
- nameBytes = tokenPtr[1].size;
- localVarName = -1;
- if (envPtr->procPtr != NULL) {
- localVarName = 1;
- for (i = 0, p = name; i < nameBytes; i++, p++) {
- if ((*p == ':') && (i < nameBytes-1) && (*(p+1) == ':')) {
- localVarName = -1;
- break;
- } else if ((*p == '(')
- && (tokenPtr->numComponents == 1)
- && (*(name + nameBytes - 1) == ')')) {
- localVarName = 0;
- break;
- }
- }
- }
-
- /*
- * Either push the variable's name, or find its index in the array
- * of local variables in a procedure frame.
- */
-
- localVar = -1;
- if (localVarName != -1) {
- localVar = TclFindCompiledLocal(name, nameBytes, localVarName,
- envPtr->procPtr);
- }
- if (localVar < 0) {
- TclEmitPush(TclRegisterNewLiteral(envPtr, name, nameBytes),
- envPtr);
- }
-
- /*
- * Emit instructions to load the variable.
- */
-
- if (tokenPtr->numComponents == 1) {
- if (localVar < 0) {
- TclEmitOpcode(INST_LOAD_SCALAR_STK, envPtr);
- } else if (localVar <= 255) {
- TclEmitInstInt1(INST_LOAD_SCALAR1, localVar, envPtr);
- } else {
- TclEmitInstInt4(INST_LOAD_SCALAR4, localVar, envPtr);
- }
- } else {
- TclCompileTokens(interp, tokenPtr+2,
- tokenPtr->numComponents-1, envPtr);
- if (localVar < 0) {
- TclEmitOpcode(INST_LOAD_ARRAY_STK, envPtr);
- } else if (localVar <= 255) {
- TclEmitInstInt1(INST_LOAD_ARRAY1, localVar, envPtr);
- } else {
- TclEmitInstInt4(INST_LOAD_ARRAY4, localVar, envPtr);
- }
- }
+ TclCompileVarSubst(interp, tokenPtr, envPtr);
numObjsToConcat++;
count -= tokenPtr->numComponents;
tokenPtr += tokenPtr->numComponents;
@@ -1875,16 +2480,13 @@ TclCompileTokens(
*/
if (Tcl_DStringLength(&textBuffer) > 0) {
- int literal;
+ int literal = TclRegisterDStringLiteral(envPtr, &textBuffer);
- literal = TclRegisterNewLiteral(envPtr, Tcl_DStringValue(&textBuffer),
- Tcl_DStringLength(&textBuffer));
TclEmitPush(literal, envPtr);
numObjsToConcat++;
-
if (numCL) {
- TclContinuationsEnter(envPtr->literalArrayPtr[literal].objPtr,
- numCL, clPosition);
+ TclContinuationsEnter(TclFetchLiteral(envPtr, literal),
+ numCL, clPosition);
}
numCL = 0;
}
@@ -1894,11 +2496,11 @@ TclCompileTokens(
*/
while (numObjsToConcat > 255) {
- TclEmitInstInt1(INST_CONCAT1, 255, envPtr);
+ TclEmitInstInt1(INST_STR_CONCAT1, 255, envPtr);
numObjsToConcat -= 254; /* concat pushes 1 obj, the result */
}
if (numObjsToConcat > 1) {
- TclEmitInstInt1(INST_CONCAT1, numObjsToConcat, envPtr);
+ TclEmitInstInt1(INST_STR_CONCAT1, numObjsToConcat, envPtr);
}
/*
@@ -1906,18 +2508,19 @@ TclCompileTokens(
*/
if (envPtr->codeNext == entryCodeNext) {
- TclEmitPush(TclRegisterNewLiteral(envPtr, "", 0), envPtr);
+ PushStringLiteral(envPtr, "");
}
Tcl_DStringFree(&textBuffer);
/*
- * Release the temp table we used to collect the locations of
- * continuation lines, if any.
+ * Release the temp table we used to collect the locations of continuation
+ * lines, if any.
*/
if (maxNumCL) {
- ckfree ((char*) clPosition);
+ ckfree(clPosition);
}
+ TclCheckStackDepth(depth+1, envPtr);
}
/*
@@ -1965,7 +2568,7 @@ TclCompileCmdWord(
*/
TclCompileTokens(interp, tokenPtr, count, envPtr);
- TclEmitOpcode(INST_EVAL_STK, envPtr);
+ TclEmitInvoke(envPtr, INST_EVAL_STK);
}
}
@@ -2010,7 +2613,7 @@ TclCompileExprWords(
*/
if ((numWords == 1) && (tokenPtr->type == TCL_TOKEN_SIMPLE_WORD)) {
- TclCompileExpr(interp, tokenPtr[1].start, tokenPtr[1].size, envPtr, 1);
+ TclCompileExpr(interp, tokenPtr[1].start,tokenPtr[1].size, envPtr, 1);
return;
}
@@ -2021,19 +2624,19 @@ TclCompileExprWords(
wordPtr = tokenPtr;
for (i = 0; i < numWords; i++) {
- TclCompileTokens(interp, wordPtr+1, wordPtr->numComponents, envPtr);
+ CompileTokens(envPtr, wordPtr, interp);
if (i < (numWords - 1)) {
- TclEmitPush(TclRegisterNewLiteral(envPtr, " ", 1), envPtr);
+ PushStringLiteral(envPtr, " ");
}
- wordPtr += (wordPtr->numComponents + 1);
+ wordPtr += wordPtr->numComponents + 1;
}
concatItems = 2*numWords - 1;
while (concatItems > 255) {
- TclEmitInstInt1(INST_CONCAT1, 255, envPtr);
+ TclEmitInstInt1(INST_STR_CONCAT1, 255, envPtr);
concatItems -= 254;
}
if (concatItems > 1) {
- TclEmitInstInt1(INST_CONCAT1, concatItems, envPtr);
+ TclEmitInstInt1(INST_STR_CONCAT1, concatItems, envPtr);
}
TclEmitOpcode(INST_EXPR_STK, envPtr);
}
@@ -2050,8 +2653,8 @@ TclCompileExprWords(
*
* Side effects:
* Instructions are added to envPtr to execute a no-op at runtime. No
- * result is pushed onto the stack: the compiler has to take care of this
- * itself if the last compiled command is a NoOp.
+ * result is pushed onto the stack: the compiler has to take care of this
+ * itself if the last compiled command is a NoOp.
*
*----------------------------------------------------------------------
*/
@@ -2067,21 +2670,17 @@ TclCompileNoOp(
{
Tcl_Token *tokenPtr;
int i;
- int savedStackDepth = envPtr->currStackDepth;
tokenPtr = parsePtr->tokenPtr;
- for(i = 1; i < parsePtr->numWords; i++) {
+ for (i = 1; i < parsePtr->numWords; i++) {
tokenPtr = tokenPtr + tokenPtr->numComponents + 1;
- envPtr->currStackDepth = savedStackDepth;
if (tokenPtr->type != TCL_TOKEN_SIMPLE_WORD) {
- TclCompileTokens(interp, tokenPtr+1, tokenPtr->numComponents,
- envPtr);
+ CompileTokens(envPtr, tokenPtr, interp);
TclEmitOpcode(INST_POP, envPtr);
}
}
- envPtr->currStackDepth = savedStackDepth;
- TclEmitPush(TclRegisterNewLiteral(envPtr, "", 0), envPtr);
+ PushStringLiteral(envPtr, "");
return TCL_OK;
}
@@ -2136,10 +2735,10 @@ TclInitByteCodeObj(
iPtr = envPtr->iPtr;
- codeBytes = (envPtr->codeNext - envPtr->codeStart);
- objArrayBytes = (envPtr->literalArrayNext * sizeof(Tcl_Obj *));
- exceptArrayBytes = (envPtr->exceptArrayNext * sizeof(ExceptionRange));
- auxDataArrayBytes = (envPtr->auxDataArrayNext * sizeof(AuxData));
+ codeBytes = envPtr->codeNext - envPtr->codeStart;
+ objArrayBytes = envPtr->literalArrayNext * sizeof(Tcl_Obj *);
+ exceptArrayBytes = envPtr->exceptArrayNext * sizeof(ExceptionRange);
+ auxDataArrayBytes = envPtr->auxDataArrayNext * sizeof(AuxData);
cmdLocBytes = GetCmdLocEncodingSize(envPtr);
/*
@@ -2159,7 +2758,7 @@ TclInitByteCodeObj(
namespacePtr = envPtr->iPtr->globalNsPtr;
}
- p = (unsigned char *) ckalloc((size_t) structureSize);
+ p = ckalloc(structureSize);
codePtr = (ByteCode *) p;
codePtr->interpHandle = TclHandlePreserve(iPtr->handle);
codePtr->compileEpoch = iPtr->compileEpoch;
@@ -2191,7 +2790,29 @@ TclInitByteCodeObj(
p += TCL_ALIGN(codeBytes); /* align object array */
codePtr->objArrayPtr = (Tcl_Obj **) p;
for (i = 0; i < numLitObjects; i++) {
- codePtr->objArrayPtr[i] = envPtr->literalArrayPtr[i].objPtr;
+ Tcl_Obj *fetched = TclFetchLiteral(envPtr, i);
+
+ if (objPtr == fetched) {
+ /*
+ * Prevent circular reference where the bytecode intrep of
+ * a value contains a literal which is that same value.
+ * If this is allowed to happen, refcount decrements may not
+ * reach zero, and memory may leak. Bugs 467523, 3357771
+ *
+ * NOTE: [Bugs 3392070, 3389764] We make a copy based completely
+ * on the string value, and do not call Tcl_DuplicateObj() so we
+ * can be sure we do not have any lingering cycles hiding in
+ * the intrep.
+ */
+ int numBytes;
+ const char *bytes = Tcl_GetStringFromObj(objPtr, &numBytes);
+
+ codePtr->objArrayPtr[i] = Tcl_NewStringObj(bytes, numBytes);
+ Tcl_IncrRefCount(codePtr->objArrayPtr[i]);
+ TclReleaseLiteral((Tcl_Interp *)iPtr, objPtr);
+ } else {
+ codePtr->objArrayPtr[i] = fetched;
+ }
}
p += TCL_ALIGN(objArrayBytes); /* align exception range array */
@@ -2216,7 +2837,7 @@ TclInitByteCodeObj(
#else
nextPtr = EncodeCmdLocMap(envPtr, codePtr, (unsigned char *) p);
if (((size_t)(nextPtr - p)) != cmdLocBytes) {
- Tcl_Panic("TclInitByteCodeObj: encoded cmd location bytes %d != expected size %d", (nextPtr - p), cmdLocBytes);
+ Tcl_Panic("TclInitByteCodeObj: encoded cmd location bytes %lu != expected size %lu", (unsigned long)(nextPtr - p), (unsigned long)cmdLocBytes);
}
#endif
@@ -2228,7 +2849,7 @@ TclInitByteCodeObj(
#ifdef TCL_COMPILE_STATS
codePtr->structureSize = structureSize
- (sizeof(size_t) + sizeof(Tcl_Time));
- Tcl_GetTime(&(codePtr->createTime));
+ Tcl_GetTime(&codePtr->createTime);
RecordByteCodeStats(codePtr);
#endif /* TCL_COMPILE_STATS */
@@ -2239,7 +2860,7 @@ TclInitByteCodeObj(
*/
TclFreeIntRep(objPtr);
- objPtr->internalRep.twoPtrValue.ptr1 = (void *) codePtr;
+ objPtr->internalRep.twoPtrValue.ptr1 = codePtr;
objPtr->typePtr = &tclByteCodeType;
/*
@@ -2247,7 +2868,7 @@ TclInitByteCodeObj(
* byte code object (internal rep), for use with the bc compiler.
*/
- Tcl_SetHashValue(Tcl_CreateHashEntry(iPtr->lineBCPtr, (char *) codePtr,
+ Tcl_SetHashValue(Tcl_CreateHashEntry(iPtr->lineBCPtr, codePtr,
&isNew), envPtr->extCmdMapPtr);
envPtr->extCmdMapPtr = NULL;
@@ -2288,20 +2909,49 @@ TclFindCompiledLocal(
* scalar or array variable. If NULL, a
* temporary var should be created. */
int nameBytes, /* Number of bytes in the name. */
- int create, /* If non-zero, allocate a local frame entry
- * for the variable if it is new. */
- register Proc *procPtr) /* Points to structure describing procedure
- * containing the variable reference. */
+ int create, /* If 1, allocate a local frame entry for the
+ * variable if it is new. */
+ CompileEnv *envPtr) /* Points to the current compile environment*/
{
register CompiledLocal *localPtr;
int localVar = -1;
register int i;
+ Proc *procPtr;
/*
* If not creating a temporary, does a local variable of the specified
* name already exist?
*/
+ procPtr = envPtr->procPtr;
+
+ if (procPtr == NULL) {
+ /*
+ * Compiling a non-body script: give it read access to the LVT in the
+ * current localCache
+ */
+
+ LocalCache *cachePtr = envPtr->iPtr->varFramePtr->localCachePtr;
+ const char *localName;
+ Tcl_Obj **varNamePtr;
+ int len;
+
+ if (!cachePtr || !name) {
+ return -1;
+ }
+
+ varNamePtr = &cachePtr->varName0;
+ for (i=0; i < cachePtr->numVars; varNamePtr++, i++) {
+ if (*varNamePtr) {
+ localName = Tcl_GetStringFromObj(*varNamePtr, &len);
+ if ((len == nameBytes) && !strncmp(name, localName, len)) {
+ return i;
+ }
+ }
+ }
+ return -1;
+ }
+
if (name != NULL) {
int localCt = procPtr->numCompiledLocals;
@@ -2325,9 +2975,7 @@ TclFindCompiledLocal(
if (create || (name == NULL)) {
localVar = procPtr->numCompiledLocals;
- localPtr = (CompiledLocal *) ckalloc((unsigned)
- (sizeof(CompiledLocal) - sizeof(localPtr->name)
- + nameBytes + 1));
+ localPtr = ckalloc(TclOffset(CompiledLocal, name) + nameBytes + 1);
if (procPtr->firstLocalPtr == NULL) {
procPtr->firstLocalPtr = procPtr->lastLocalPtr = localPtr;
} else {
@@ -2377,7 +3025,7 @@ TclExpandCodeArray(
void *envArgPtr) /* Points to the CompileEnv whose code array
* must be enlarged. */
{
- CompileEnv *envPtr = (CompileEnv *) envArgPtr;
+ CompileEnv *envPtr = envArgPtr;
/* The CompileEnv containing the code array to
* be doubled in size. */
@@ -2387,25 +3035,26 @@ TclExpandCodeArray(
* [inclusive].
*/
- size_t currBytes = (envPtr->codeNext - envPtr->codeStart);
- size_t newBytes = 2*(envPtr->codeEnd - envPtr->codeStart);
+ size_t currBytes = envPtr->codeNext - envPtr->codeStart;
+ size_t newBytes = 2 * (envPtr->codeEnd - envPtr->codeStart);
if (envPtr->mallocedCodeArray) {
- envPtr->codeStart = (unsigned char *)
- ckrealloc((char *)envPtr->codeStart, newBytes);
+ envPtr->codeStart = ckrealloc(envPtr->codeStart, newBytes);
} else {
/*
- * envPtr->codeStart isn't a ckalloc'd pointer, so we must
- * code a ckrealloc equivalent for ourselves.
+ * envPtr->codeStart isn't a ckalloc'd pointer, so we must code a
+ * ckrealloc equivalent for ourselves.
*/
- unsigned char *newPtr = (unsigned char *) ckalloc((unsigned) newBytes);
+
+ unsigned char *newPtr = ckalloc(newBytes);
+
memcpy(newPtr, envPtr->codeStart, currBytes);
envPtr->codeStart = newPtr;
envPtr->mallocedCodeArray = 1;
}
- envPtr->codeNext = (envPtr->codeStart + currBytes);
- envPtr->codeEnd = (envPtr->codeStart + newBytes);
+ envPtr->codeNext = envPtr->codeStart + currBytes;
+ envPtr->codeEnd = envPtr->codeStart + newBytes;
}
/*
@@ -2452,19 +3101,20 @@ EnterCmdStartData(
*/
size_t currElems = envPtr->cmdMapEnd;
- size_t newElems = 2*currElems;
+ size_t newElems = 2 * currElems;
size_t currBytes = currElems * sizeof(CmdLocation);
size_t newBytes = newElems * sizeof(CmdLocation);
if (envPtr->mallocedCmdMap) {
- envPtr->cmdMapPtr = (CmdLocation *)
- ckrealloc((char *) envPtr->cmdMapPtr, newBytes);
+ envPtr->cmdMapPtr = ckrealloc(envPtr->cmdMapPtr, newBytes);
} else {
/*
- * envPtr->cmdMapPtr isn't a ckalloc'd pointer, so we must
- * code a ckrealloc equivalent for ourselves.
+ * envPtr->cmdMapPtr isn't a ckalloc'd pointer, so we must code a
+ * ckrealloc equivalent for ourselves.
*/
- CmdLocation *newPtr = (CmdLocation *) ckalloc((unsigned) newBytes);
+
+ CmdLocation *newPtr = ckalloc(newBytes);
+
memcpy(newPtr, envPtr->cmdMapPtr, currBytes);
envPtr->cmdMapPtr = newPtr;
envPtr->mallocedCmdMap = 1;
@@ -2478,7 +3128,7 @@ EnterCmdStartData(
}
}
- cmdLocPtr = &(envPtr->cmdMapPtr[cmdIndex]);
+ cmdLocPtr = &envPtr->cmdMapPtr[cmdIndex];
cmdLocPtr->codeOffset = codeOffset;
cmdLocPtr->srcOffset = srcOffset;
cmdLocPtr->numSrcBytes = -1;
@@ -2527,7 +3177,7 @@ EnterCmdExtentData(
cmdIndex);
}
- cmdLocPtr = &(envPtr->cmdMapPtr[cmdIndex]);
+ cmdLocPtr = &envPtr->cmdMapPtr[cmdIndex];
cmdLocPtr->numSrcBytes = numSrcBytes;
cmdLocPtr->numCodeBytes = numCodeBytes;
}
@@ -2563,14 +3213,13 @@ EnterCmdWordData(
int len,
int numWords,
int line,
- int* clNext,
+ int *clNext,
int **wlines,
- CompileEnv* envPtr)
+ CompileEnv *envPtr)
{
ECL *ePtr;
const char *last;
- int wordIdx, wordLine, *wwlines;
- int* wordNext;
+ int wordIdx, wordLine, *wwlines, *wordNext;
if (eclPtr->nuloc >= eclPtr->nloc) {
/*
@@ -2583,25 +3232,25 @@ EnterCmdWordData(
size_t newElems = (currElems ? 2*currElems : 1);
size_t newBytes = newElems * sizeof(ECL);
- eclPtr->loc = (ECL *) ckrealloc((char *)(eclPtr->loc), newBytes);
+ eclPtr->loc = ckrealloc(eclPtr->loc, newBytes);
eclPtr->nloc = newElems;
}
ePtr = &eclPtr->loc[eclPtr->nuloc];
ePtr->srcOffset = srcOffset;
- ePtr->line = (int *) ckalloc(numWords * sizeof(int));
- ePtr->next = (int**) ckalloc (numWords * sizeof (int*));
+ ePtr->line = ckalloc(numWords * sizeof(int));
+ ePtr->next = ckalloc(numWords * sizeof(int *));
ePtr->nline = numWords;
- wwlines = (int *) ckalloc(numWords * sizeof(int));
+ wwlines = ckalloc(numWords * sizeof(int));
last = cmd;
wordLine = line;
wordNext = clNext;
for (wordIdx=0 ; wordIdx<numWords;
wordIdx++, tokenPtr += tokenPtr->numComponents + 1) {
- TclAdvanceLines (&wordLine, last, tokenPtr->start);
- TclAdvanceContinuations (&wordLine, &wordNext,
- tokenPtr->start - envPtr->source);
+ TclAdvanceLines(&wordLine, last, tokenPtr->start);
+ TclAdvanceContinuations(&wordLine, &wordNext,
+ tokenPtr->start - envPtr->source);
wwlines[wordIdx] =
(TclWordKnownAtCompileTime(tokenPtr, NULL) ? wordLine : -1);
ePtr->line[wordIdx] = wordLine;
@@ -2640,6 +3289,7 @@ TclCreateExceptRange(
* new ExceptionRange structure. */
{
register ExceptionRange *rangePtr;
+ register ExceptionAux *auxPtr;
int index = envPtr->exceptArrayNext;
if (index >= envPtr->exceptArrayEnd) {
@@ -2651,28 +3301,36 @@ TclCreateExceptRange(
size_t currBytes =
envPtr->exceptArrayNext * sizeof(ExceptionRange);
+ size_t currBytes2 = envPtr->exceptArrayNext * sizeof(ExceptionAux);
int newElems = 2*envPtr->exceptArrayEnd;
size_t newBytes = newElems * sizeof(ExceptionRange);
+ size_t newBytes2 = newElems * sizeof(ExceptionAux);
if (envPtr->mallocedExceptArray) {
- envPtr->exceptArrayPtr = (ExceptionRange *)
- ckrealloc((char *)(envPtr->exceptArrayPtr), newBytes);
+ envPtr->exceptArrayPtr =
+ ckrealloc(envPtr->exceptArrayPtr, newBytes);
+ envPtr->exceptAuxArrayPtr =
+ ckrealloc(envPtr->exceptAuxArrayPtr, newBytes2);
} else {
/*
* envPtr->exceptArrayPtr isn't a ckalloc'd pointer, so we must
* code a ckrealloc equivalent for ourselves.
*/
- ExceptionRange *newPtr = (ExceptionRange *)
- ckalloc((unsigned) newBytes);
+
+ ExceptionRange *newPtr = ckalloc(newBytes);
+ ExceptionAux *newPtr2 = ckalloc(newBytes2);
+
memcpy(newPtr, envPtr->exceptArrayPtr, currBytes);
+ memcpy(newPtr2, envPtr->exceptAuxArrayPtr, currBytes2);
envPtr->exceptArrayPtr = newPtr;
+ envPtr->exceptAuxArrayPtr = newPtr2;
envPtr->mallocedExceptArray = 1;
}
envPtr->exceptArrayEnd = newElems;
}
envPtr->exceptArrayNext++;
- rangePtr = &(envPtr->exceptArrayPtr[index]);
+ rangePtr = &envPtr->exceptArrayPtr[index];
rangePtr->type = type;
rangePtr->nestingLevel = envPtr->exceptDepth;
rangePtr->codeOffset = -1;
@@ -2680,10 +3338,294 @@ TclCreateExceptRange(
rangePtr->breakOffset = -1;
rangePtr->continueOffset = -1;
rangePtr->catchOffset = -1;
+ auxPtr = &envPtr->exceptAuxArrayPtr[index];
+ auxPtr->supportsContinue = 1;
+ auxPtr->stackDepth = envPtr->currStackDepth;
+ auxPtr->expandTarget = envPtr->expandCount;
+ auxPtr->expandTargetDepth = -1;
+ auxPtr->numBreakTargets = 0;
+ auxPtr->breakTargets = NULL;
+ auxPtr->allocBreakTargets = 0;
+ auxPtr->numContinueTargets = 0;
+ auxPtr->continueTargets = NULL;
+ auxPtr->allocContinueTargets = 0;
return index;
}
/*
+ * ---------------------------------------------------------------------
+ *
+ * TclGetInnermostExceptionRange --
+ *
+ * Returns the innermost exception range that covers the current code
+ * creation point, and (optionally) the stack depth that is expected at
+ * that point. Relies on the fact that the range has a numCodeBytes = -1
+ * when it is being populated and that inner ranges come after outer
+ * ranges.
+ *
+ * ---------------------------------------------------------------------
+ */
+
+ExceptionRange *
+TclGetInnermostExceptionRange(
+ CompileEnv *envPtr,
+ int returnCode,
+ ExceptionAux **auxPtrPtr)
+{
+ int exnIdx = -1, i;
+
+ for (i=0 ; i<envPtr->exceptArrayNext ; i++) {
+ ExceptionRange *rangePtr = &envPtr->exceptArrayPtr[i];
+
+ if (CurrentOffset(envPtr) >= rangePtr->codeOffset &&
+ (rangePtr->numCodeBytes == -1 || CurrentOffset(envPtr) <
+ rangePtr->codeOffset+rangePtr->numCodeBytes) &&
+ (returnCode != TCL_CONTINUE ||
+ envPtr->exceptAuxArrayPtr[i].supportsContinue)) {
+ exnIdx = i;
+ }
+ }
+ if (exnIdx == -1) {
+ return NULL;
+ }
+ if (auxPtrPtr) {
+ *auxPtrPtr = &envPtr->exceptAuxArrayPtr[exnIdx];
+ }
+ return &envPtr->exceptArrayPtr[exnIdx];
+}
+
+/*
+ * ---------------------------------------------------------------------
+ *
+ * TclAddLoopBreakFixup, TclAddLoopContinueFixup --
+ *
+ * Adds a place that wants to break/continue to the loop exception range
+ * tracking that will be fixed up once the loop can be finalized. These
+ * functions will generate an INST_JUMP4 that will be fixed up during the
+ * loop finalization.
+ *
+ * ---------------------------------------------------------------------
+ */
+
+void
+TclAddLoopBreakFixup(
+ CompileEnv *envPtr,
+ ExceptionAux *auxPtr)
+{
+ int range = auxPtr - envPtr->exceptAuxArrayPtr;
+
+ if (envPtr->exceptArrayPtr[range].type != LOOP_EXCEPTION_RANGE) {
+ Tcl_Panic("trying to add 'break' fixup to full exception range");
+ }
+
+ if (++auxPtr->numBreakTargets > auxPtr->allocBreakTargets) {
+ auxPtr->allocBreakTargets *= 2;
+ auxPtr->allocBreakTargets += 2;
+ if (auxPtr->breakTargets) {
+ auxPtr->breakTargets = ckrealloc(auxPtr->breakTargets,
+ sizeof(int) * auxPtr->allocBreakTargets);
+ } else {
+ auxPtr->breakTargets =
+ ckalloc(sizeof(int) * auxPtr->allocBreakTargets);
+ }
+ }
+ auxPtr->breakTargets[auxPtr->numBreakTargets - 1] = CurrentOffset(envPtr);
+ TclEmitInstInt4(INST_JUMP4, 0, envPtr);
+}
+
+void
+TclAddLoopContinueFixup(
+ CompileEnv *envPtr,
+ ExceptionAux *auxPtr)
+{
+ int range = auxPtr - envPtr->exceptAuxArrayPtr;
+
+ if (envPtr->exceptArrayPtr[range].type != LOOP_EXCEPTION_RANGE) {
+ Tcl_Panic("trying to add 'continue' fixup to full exception range");
+ }
+
+ if (++auxPtr->numContinueTargets > auxPtr->allocContinueTargets) {
+ auxPtr->allocContinueTargets *= 2;
+ auxPtr->allocContinueTargets += 2;
+ if (auxPtr->continueTargets) {
+ auxPtr->continueTargets = ckrealloc(auxPtr->continueTargets,
+ sizeof(int) * auxPtr->allocContinueTargets);
+ } else {
+ auxPtr->continueTargets =
+ ckalloc(sizeof(int) * auxPtr->allocContinueTargets);
+ }
+ }
+ auxPtr->continueTargets[auxPtr->numContinueTargets - 1] =
+ CurrentOffset(envPtr);
+ TclEmitInstInt4(INST_JUMP4, 0, envPtr);
+}
+
+/*
+ * ---------------------------------------------------------------------
+ *
+ * TclCleanupStackForBreakContinue --
+ *
+ * Ditch the extra elements from the auxiliary stack and the main stack.
+ * How to do this exactly depends on whether there are any elements on
+ * the auxiliary stack to pop.
+ *
+ * ---------------------------------------------------------------------
+ */
+
+void
+TclCleanupStackForBreakContinue(
+ CompileEnv *envPtr,
+ ExceptionAux *auxPtr)
+{
+ int savedStackDepth = envPtr->currStackDepth;
+ int toPop = envPtr->expandCount - auxPtr->expandTarget;
+
+ if (toPop > 0) {
+ while (toPop --> 0) {
+ TclEmitOpcode(INST_EXPAND_DROP, envPtr);
+ }
+ TclAdjustStackDepth(auxPtr->expandTargetDepth - envPtr->currStackDepth,
+ envPtr);
+ envPtr->currStackDepth = auxPtr->expandTargetDepth;
+ }
+ toPop = envPtr->currStackDepth - auxPtr->stackDepth;
+ while (toPop --> 0) {
+ TclEmitOpcode(INST_POP, envPtr);
+ }
+ envPtr->currStackDepth = savedStackDepth;
+}
+
+/*
+ * ---------------------------------------------------------------------
+ *
+ * StartExpanding --
+ *
+ * Pushes an INST_EXPAND_START and does some additional housekeeping so
+ * that the [break] and [continue] compilers can use an exception-free
+ * issue to discard it.
+ *
+ * ---------------------------------------------------------------------
+ */
+
+static void
+StartExpanding(
+ CompileEnv *envPtr)
+{
+ int i;
+
+ TclEmitOpcode(INST_EXPAND_START, envPtr);
+
+ /*
+ * Update inner exception ranges with information about the environment
+ * where this expansion started.
+ */
+
+ for (i=0 ; i<envPtr->exceptArrayNext ; i++) {
+ ExceptionRange *rangePtr = &envPtr->exceptArrayPtr[i];
+ ExceptionAux *auxPtr = &envPtr->exceptAuxArrayPtr[i];
+
+ /*
+ * Ignore loops unless they're still being built.
+ */
+
+ if (rangePtr->codeOffset > CurrentOffset(envPtr)) {
+ continue;
+ }
+ if (rangePtr->numCodeBytes != -1) {
+ continue;
+ }
+
+ /*
+ * Adequate condition: further out loops and further in exceptions
+ * don't actually need this information.
+ */
+
+ if (auxPtr->expandTarget == envPtr->expandCount) {
+ auxPtr->expandTargetDepth = envPtr->currStackDepth;
+ }
+ }
+
+ /*
+ * There's now one more expansion being processed on the auxiliary stack.
+ */
+
+ envPtr->expandCount++;
+}
+
+/*
+ * ---------------------------------------------------------------------
+ *
+ * TclFinalizeLoopExceptionRange --
+ *
+ * Finalizes a loop exception range, binding the registered [break] and
+ * [continue] implementations so that they jump to the correct place.
+ * Note that this must only be called after *all* the exception range
+ * target offsets have been set.
+ *
+ * ---------------------------------------------------------------------
+ */
+
+void
+TclFinalizeLoopExceptionRange(
+ CompileEnv *envPtr,
+ int range)
+{
+ ExceptionRange *rangePtr = &envPtr->exceptArrayPtr[range];
+ ExceptionAux *auxPtr = &envPtr->exceptAuxArrayPtr[range];
+ int i, offset;
+ unsigned char *site;
+
+ if (rangePtr->type != LOOP_EXCEPTION_RANGE) {
+ Tcl_Panic("trying to finalize a loop exception range");
+ }
+
+ /*
+ * Do the jump fixups. Note that these are always issued as INST_JUMP4 so
+ * there is no need to fuss around with updating code offsets.
+ */
+
+ for (i=0 ; i<auxPtr->numBreakTargets ; i++) {
+ site = envPtr->codeStart + auxPtr->breakTargets[i];
+ offset = rangePtr->breakOffset - auxPtr->breakTargets[i];
+ TclUpdateInstInt4AtPc(INST_JUMP4, offset, site);
+ }
+ for (i=0 ; i<auxPtr->numContinueTargets ; i++) {
+ site = envPtr->codeStart + auxPtr->continueTargets[i];
+ if (rangePtr->continueOffset == -1) {
+ int j;
+
+ /*
+ * WTF? Can't bind, so revert to an INST_CONTINUE. Not enough
+ * space to do anything else.
+ */
+
+ *site = INST_CONTINUE;
+ for (j=0 ; j<4 ; j++) {
+ *++site = INST_NOP;
+ }
+ } else {
+ offset = rangePtr->continueOffset - auxPtr->continueTargets[i];
+ TclUpdateInstInt4AtPc(INST_JUMP4, offset, site);
+ }
+ }
+
+ /*
+ * Drop the arrays we were holding the only reference to.
+ */
+
+ if (auxPtr->breakTargets) {
+ ckfree(auxPtr->breakTargets);
+ auxPtr->breakTargets = NULL;
+ auxPtr->numBreakTargets = 0;
+ }
+ if (auxPtr->continueTargets) {
+ ckfree(auxPtr->continueTargets);
+ auxPtr->continueTargets = NULL;
+ auxPtr->numContinueTargets = 0;
+ }
+}
+
+/*
*----------------------------------------------------------------------
*
* TclCreateAuxData --
@@ -2710,14 +3652,14 @@ int
TclCreateAuxData(
ClientData clientData, /* The compilation auxiliary data to store in
* the new aux data record. */
- AuxDataType *typePtr, /* Pointer to the type to attach to this
+ const AuxDataType *typePtr, /* Pointer to the type to attach to this
* AuxData */
register CompileEnv *envPtr)/* Points to the CompileEnv for which a new
* aux data structure is to be allocated. */
{
int index; /* Index for the new AuxData structure. */
register AuxData *auxDataPtr;
- /* Points to the new AuxData structure */
+ /* Points to the new AuxData structure */
index = envPtr->auxDataArrayNext;
if (index >= envPtr->auxDataArrayEnd) {
@@ -2732,14 +3674,16 @@ TclCreateAuxData(
size_t newBytes = newElems * sizeof(AuxData);
if (envPtr->mallocedAuxDataArray) {
- envPtr->auxDataArrayPtr = (AuxData *)
- ckrealloc((char *)(envPtr->auxDataArrayPtr), newBytes);
+ envPtr->auxDataArrayPtr =
+ ckrealloc(envPtr->auxDataArrayPtr, newBytes);
} else {
/*
* envPtr->auxDataArrayPtr isn't a ckalloc'd pointer, so we must
* code a ckrealloc equivalent for ourselves.
*/
- AuxData *newPtr = (AuxData *) ckalloc((unsigned) newBytes);
+
+ AuxData *newPtr = ckalloc(newBytes);
+
memcpy(newPtr, envPtr->auxDataArrayPtr, currBytes);
envPtr->auxDataArrayPtr = newPtr;
envPtr->mallocedAuxDataArray = 1;
@@ -2748,7 +3692,7 @@ TclCreateAuxData(
}
envPtr->auxDataArrayNext++;
- auxDataPtr = &(envPtr->auxDataArrayPtr[index]);
+ auxDataPtr = &envPtr->auxDataArrayPtr[index];
auxDataPtr->clientData = clientData;
auxDataPtr->type = typePtr;
return index;
@@ -2779,7 +3723,7 @@ TclInitJumpFixupArray(
{
fixupArrayPtr->fixup = fixupArrayPtr->staticFixupSpace;
fixupArrayPtr->next = 0;
- fixupArrayPtr->end = (JUMPFIXUP_INIT_ENTRIES - 1);
+ fixupArrayPtr->end = JUMPFIXUP_INIT_ENTRIES - 1;
fixupArrayPtr->mallocedArray = 0;
}
@@ -2806,8 +3750,8 @@ TclInitJumpFixupArray(
void
TclExpandJumpFixupArray(
register JumpFixupArray *fixupArrayPtr)
- /* Points to the JumpFixupArray structure
- * to enlarge. */
+ /* Points to the JumpFixupArray structure to
+ * enlarge. */
{
/*
* The currently allocated jump fixup entries are stored from fixup[0] up
@@ -2820,14 +3764,15 @@ TclExpandJumpFixupArray(
size_t newBytes = newElems * sizeof(JumpFixup);
if (fixupArrayPtr->mallocedArray) {
- fixupArrayPtr->fixup = (JumpFixup *)
- ckrealloc((char *)(fixupArrayPtr->fixup), newBytes);
+ fixupArrayPtr->fixup = ckrealloc(fixupArrayPtr->fixup, newBytes);
} else {
/*
- * fixupArrayPtr->fixup isn't a ckalloc'd pointer, so we must
- * code a ckrealloc equivalent for ourselves.
+ * fixupArrayPtr->fixup isn't a ckalloc'd pointer, so we must code a
+ * ckrealloc equivalent for ourselves.
*/
- JumpFixup *newPtr = (JumpFixup *) ckalloc((unsigned) newBytes);
+
+ JumpFixup *newPtr = ckalloc(newBytes);
+
memcpy(newPtr, fixupArrayPtr->fixup, currBytes);
fixupArrayPtr->fixup = newPtr;
fixupArrayPtr->mallocedArray = 1;
@@ -2858,7 +3803,7 @@ TclFreeJumpFixupArray(
* free. */
{
if (fixupArrayPtr->mallocedArray) {
- ckfree((char *) fixupArrayPtr->fixup);
+ ckfree(fixupArrayPtr->fixup);
}
}
@@ -2903,7 +3848,7 @@ TclEmitForwardJump(
*/
jumpFixupPtr->jumpType = jumpType;
- jumpFixupPtr->codeOffset = (envPtr->codeNext - envPtr->codeStart);
+ jumpFixupPtr->codeOffset = envPtr->codeNext - envPtr->codeStart;
jumpFixupPtr->cmdIndex = envPtr->numCommands;
jumpFixupPtr->exceptIndex = envPtr->exceptArrayNext;
@@ -2961,7 +3906,7 @@ TclFixupForwardJump(
unsigned numBytes;
if (jumpDist <= distThreshold) {
- jumpPc = (envPtr->codeStart + jumpFixupPtr->codeOffset);
+ jumpPc = envPtr->codeStart + jumpFixupPtr->codeOffset;
switch (jumpFixupPtr->jumpType) {
case TCL_UNCONDITIONAL_JUMP:
TclUpdateInstInt1AtPc(INST_JUMP1, jumpDist, jumpPc);
@@ -2986,7 +3931,7 @@ TclFixupForwardJump(
if ((envPtr->codeNext + 3) > envPtr->codeEnd) {
TclExpandCodeArray(envPtr);
}
- jumpPc = (envPtr->codeStart + jumpFixupPtr->codeOffset);
+ jumpPc = envPtr->codeStart + jumpFixupPtr->codeOffset;
numBytes = envPtr->codeNext-jumpPc-2;
p = jumpPc+2;
memmove(p+3, p, numBytes);
@@ -3011,19 +3956,19 @@ TclFixupForwardJump(
*/
firstCmd = jumpFixupPtr->cmdIndex;
- lastCmd = (envPtr->numCommands - 1);
+ lastCmd = envPtr->numCommands - 1;
if (firstCmd < lastCmd) {
for (k = firstCmd; k <= lastCmd; k++) {
- (envPtr->cmdMapPtr[k]).codeOffset += 3;
+ envPtr->cmdMapPtr[k].codeOffset += 3;
}
}
firstRange = jumpFixupPtr->exceptIndex;
- lastRange = (envPtr->exceptArrayNext - 1);
+ lastRange = envPtr->exceptArrayNext - 1;
for (k = firstRange; k <= lastRange; k++) {
- ExceptionRange *rangePtr = &(envPtr->exceptArrayPtr[k]);
- rangePtr->codeOffset += 3;
+ ExceptionRange *rangePtr = &envPtr->exceptArrayPtr[k];
+ rangePtr->codeOffset += 3;
switch (rangePtr->type) {
case LOOP_EXCEPTION_RANGE:
rangePtr->breakOffset += 3;
@@ -3040,70 +3985,215 @@ TclFixupForwardJump(
}
}
+ for (k = 0 ; k < envPtr->exceptArrayNext ; k++) {
+ ExceptionAux *auxPtr = &envPtr->exceptAuxArrayPtr[k];
+ int i;
+
+ for (i=0 ; i<auxPtr->numBreakTargets ; i++) {
+ if (jumpFixupPtr->codeOffset < auxPtr->breakTargets[i]) {
+ auxPtr->breakTargets[i] += 3;
+ }
+ }
+ for (i=0 ; i<auxPtr->numContinueTargets ; i++) {
+ if (jumpFixupPtr->codeOffset < auxPtr->continueTargets[i]) {
+ auxPtr->continueTargets[i] += 3;
+ }
+ }
+ }
+
+ return 1; /* the jump was grown */
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * TclEmitInvoke --
+ *
+ * Emit one of the invoke-related instructions, wrapping it if necessary
+ * in code that ensures that any break or continue operation passing
+ * through it gets the stack unwinding correct, converting it into an
+ * internal jump if in an appropriate context.
+ *
+ * Results:
+ * None
+ *
+ * Side effects:
+ * Issues the jump with all correct stack management. May create another
+ * loop exception range; pointers to ExceptionRange and ExceptionAux
+ * structures should not be held across this call.
+ *
+ *----------------------------------------------------------------------
+ */
+
+void
+TclEmitInvoke(
+ CompileEnv *envPtr,
+ int opcode,
+ ...)
+{
+ va_list argList;
+ ExceptionRange *rangePtr;
+ ExceptionAux *auxBreakPtr, *auxContinuePtr;
+ int arg1, arg2, wordCount = 0, expandCount = 0;
+ int loopRange = 0, breakRange = 0, continueRange = 0;
+ int cleanup, depth = TclGetStackDepth(envPtr);
+
+ /*
+ * Parse the arguments.
+ */
+
+ va_start(argList, opcode);
+ switch (opcode) {
+ case INST_INVOKE_STK1:
+ wordCount = arg1 = cleanup = va_arg(argList, int);
+ arg2 = 0;
+ break;
+ case INST_INVOKE_STK4:
+ wordCount = arg1 = cleanup = va_arg(argList, int);
+ arg2 = 0;
+ break;
+ case INST_INVOKE_REPLACE:
+ arg1 = va_arg(argList, int);
+ arg2 = va_arg(argList, int);
+ wordCount = arg1 + arg2 - 1;
+ cleanup = arg1 + 1;
+ break;
+ default:
+ Tcl_Panic("unexpected opcode");
+ case INST_EVAL_STK:
+ wordCount = cleanup = 1;
+ arg1 = arg2 = 0;
+ break;
+ case INST_RETURN_STK:
+ wordCount = cleanup = 2;
+ arg1 = arg2 = 0;
+ break;
+ case INST_INVOKE_EXPANDED:
+ wordCount = arg1 = cleanup = va_arg(argList, int);
+ arg2 = 0;
+ expandCount = 1;
+ break;
+ }
+ va_end(argList);
+
/*
- * TIP #280: Adjust the mapping from PC values to the per-command
- * information about arguments and their line numbers.
+ * Determine if we need to handle break and continue exceptions with a
+ * special handling exception range (so that we can correctly unwind the
+ * stack).
*
- * Note: We cannot simply remove an out-of-date entry and then reinsert
- * with the proper PC, because then we might overwrite another entry which
- * was at that location. Therefore we pull (copy + delete) all effected
- * entries (beyond the fixed PC) into an array, update them there, and at
- * last reinsert them all.
+ * These must be done separately; they can be different (especially for
+ * calls from inside a [for] increment clause).
*/
- {
- ExtCmdLoc* eclPtr = envPtr->extCmdMapPtr;
+ rangePtr = TclGetInnermostExceptionRange(envPtr, TCL_BREAK, &auxBreakPtr);
+ if (rangePtr == NULL || rangePtr->type != LOOP_EXCEPTION_RANGE) {
+ auxBreakPtr = NULL;
+ } else if (auxBreakPtr->stackDepth == envPtr->currStackDepth-wordCount
+ && auxBreakPtr->expandTarget == envPtr->expandCount-expandCount) {
+ auxBreakPtr = NULL;
+ } else {
+ breakRange = auxBreakPtr - envPtr->exceptAuxArrayPtr;
+ }
- /* A helper structure */
+ rangePtr = TclGetInnermostExceptionRange(envPtr, TCL_CONTINUE,
+ &auxContinuePtr);
+ if (rangePtr == NULL || rangePtr->type != LOOP_EXCEPTION_RANGE) {
+ auxContinuePtr = NULL;
+ } else if (auxContinuePtr->stackDepth == envPtr->currStackDepth-wordCount
+ && auxContinuePtr->expandTarget == envPtr->expandCount-expandCount) {
+ auxContinuePtr = NULL;
+ } else {
+ continueRange = auxBreakPtr - envPtr->exceptAuxArrayPtr;
+ }
- typedef struct {
- int pc;
- int cmd;
- } MAP;
+ if (auxBreakPtr != NULL || auxContinuePtr != NULL) {
+ loopRange = TclCreateExceptRange(LOOP_EXCEPTION_RANGE, envPtr);
+ ExceptionRangeStarts(envPtr, loopRange);
+ }
- /*
- * And the helper array. At most the whole hashtable is placed into
- * this.
- */
+ /*
+ * Issue the invoke itself.
+ */
- MAP *map = (MAP*) ckalloc (sizeof(MAP) * eclPtr->litInfo.numEntries);
+ switch (opcode) {
+ case INST_INVOKE_STK1:
+ TclEmitInstInt1(INST_INVOKE_STK1, arg1, envPtr);
+ break;
+ case INST_INVOKE_STK4:
+ TclEmitInstInt4(INST_INVOKE_STK4, arg1, envPtr);
+ break;
+ case INST_INVOKE_EXPANDED:
+ TclEmitOpcode(INST_INVOKE_EXPANDED, envPtr);
+ envPtr->expandCount--;
+ TclAdjustStackDepth(1 - arg1, envPtr);
+ break;
+ case INST_EVAL_STK:
+ TclEmitOpcode(INST_EVAL_STK, envPtr);
+ break;
+ case INST_RETURN_STK:
+ TclEmitOpcode(INST_RETURN_STK, envPtr);
+ break;
+ case INST_INVOKE_REPLACE:
+ TclEmitInstInt4(INST_INVOKE_REPLACE, arg1, envPtr);
+ TclEmitInt1(arg2, envPtr);
+ TclAdjustStackDepth(-1, envPtr); /* Correction to stack depth calcs */
+ break;
+ }
- Tcl_HashSearch hSearch;
- Tcl_HashEntry* hPtr;
- int n, k, isnew;
+ /*
+ * If we're generating a special wrapper exception range, we need to
+ * finish that up now.
+ */
+
+ if (auxBreakPtr != NULL || auxContinuePtr != NULL) {
+ int savedStackDepth = envPtr->currStackDepth;
+ int savedExpandCount = envPtr->expandCount;
+ JumpFixup nonTrapFixup;
+
+ if (auxBreakPtr != NULL) {
+ auxBreakPtr = envPtr->exceptAuxArrayPtr + breakRange;
+ }
+ if (auxContinuePtr != NULL) {
+ auxContinuePtr = envPtr->exceptAuxArrayPtr + continueRange;
+ }
+
+ ExceptionRangeEnds(envPtr, loopRange);
+ TclEmitForwardJump(envPtr, TCL_UNCONDITIONAL_JUMP, &nonTrapFixup);
/*
- * Phase I: Locate the affected entries, and save them in adjusted
- * form to the array. This removes them from the hash.
+ * Careful! When generating these stack unwinding sequences, the depth
+ * of stack in the cases where they are taken is not the same as if
+ * the exception is not taken.
*/
- for (n = 0, hPtr = Tcl_FirstHashEntry(&eclPtr->litInfo, &hSearch);
- hPtr != NULL;
- hPtr = Tcl_NextHashEntry(&hSearch)) {
+ if (auxBreakPtr != NULL) {
+ TclAdjustStackDepth(-1, envPtr);
- map [n].cmd = PTR2INT(Tcl_GetHashValue(hPtr));
- map [n].pc = PTR2INT(Tcl_GetHashKey (&eclPtr->litInfo,hPtr));
+ ExceptionRangeTarget(envPtr, loopRange, breakOffset);
+ TclCleanupStackForBreakContinue(envPtr, auxBreakPtr);
+ TclAddLoopBreakFixup(envPtr, auxBreakPtr);
+ TclAdjustStackDepth(1, envPtr);
- if (map[n].pc >= (jumpFixupPtr->codeOffset + 2)) {
- Tcl_DeleteHashEntry(hPtr);
- map [n].pc += 3;
- n++;
- }
+ envPtr->currStackDepth = savedStackDepth;
+ envPtr->expandCount = savedExpandCount;
}
- /*
- * Phase II: Re-insert the modified entries into the hash.
- */
+ if (auxContinuePtr != NULL) {
+ TclAdjustStackDepth(-1, envPtr);
+
+ ExceptionRangeTarget(envPtr, loopRange, continueOffset);
+ TclCleanupStackForBreakContinue(envPtr, auxContinuePtr);
+ TclAddLoopContinueFixup(envPtr, auxContinuePtr);
+ TclAdjustStackDepth(1, envPtr);
- for (k=0;k<n;k++) {
- hPtr = Tcl_CreateHashEntry(&eclPtr->litInfo, INT2PTR(map[k].pc), &isnew);
- Tcl_SetHashValue(hPtr, INT2PTR(map[k].cmd));
+ envPtr->currStackDepth = savedStackDepth;
+ envPtr->expandCount = savedExpandCount;
}
- ckfree ((char *) map);
+ TclFinalizeLoopExceptionRange(envPtr, loopRange);
+ TclFixupForwardJumpToHere(envPtr, &nonTrapFixup, 127);
}
-
- return 1; /* the jump was grown */
+ TclCheckStackDepth(depth+1-cleanup, envPtr);
}
/*
@@ -3125,7 +4215,7 @@ TclFixupForwardJump(
*----------------------------------------------------------------------
*/
-void * /* == InstructionDesc* == */
+const void * /* == InstructionDesc* == */
TclGetInstructionTable(void)
{
return &tclInstructionTable[0];
@@ -3152,7 +4242,7 @@ TclGetInstructionTable(void)
static void
RegisterAuxDataType(
- AuxDataType *typePtr) /* Information about object type; storage must
+ const AuxDataType *typePtr) /* Information about object type; storage must
* be statically allocated (must live forever;
* will not be deallocated). */
{
@@ -3201,12 +4291,12 @@ RegisterAuxDataType(
*----------------------------------------------------------------------
*/
-AuxDataType *
+const AuxDataType *
TclGetAuxDataType(
- char *typeName) /* Name of AuxData type to look up. */
+ const char *typeName) /* Name of AuxData type to look up. */
{
register Tcl_HashEntry *hPtr;
- AuxDataType *typePtr = NULL;
+ const AuxDataType *typePtr = NULL;
Tcl_MutexLock(&tableMutex);
if (!auxDataTypeTableInitialized) {
@@ -3215,7 +4305,7 @@ TclGetAuxDataType(
hPtr = Tcl_FindHashEntry(&auxDataTypeTable, typeName);
if (hPtr != NULL) {
- typePtr = (AuxDataType *) Tcl_GetHashValue(hPtr);
+ typePtr = Tcl_GetHashValue(hPtr);
}
Tcl_MutexUnlock(&tableMutex);
@@ -3252,11 +4342,13 @@ TclInitAuxDataTypeTable(void)
Tcl_InitHashTable(&auxDataTypeTable, TCL_STRING_KEYS);
/*
- * There are only two AuxData type at this time, so register them here.
+ * There are only four AuxData types at this time, so register them here.
*/
RegisterAuxDataType(&tclForeachInfoType);
+ RegisterAuxDataType(&tclNewForeachInfoType);
RegisterAuxDataType(&tclJumptableInfoType);
+ RegisterAuxDataType(&tclDictUpdateInfoType);
}
/*
@@ -3324,13 +4416,13 @@ GetCmdLocEncodingSize(
codeDeltaNext = codeLengthNext = srcDeltaNext = srcLengthNext = 0;
prevCodeOffset = prevSrcOffset = 0;
for (i = 0; i < numCmds; i++) {
- codeDelta = (mapPtr[i].codeOffset - prevCodeOffset);
+ codeDelta = mapPtr[i].codeOffset - prevCodeOffset;
if (codeDelta < 0) {
Tcl_Panic("GetCmdLocEncodingSize: bad code offset");
} else if (codeDelta <= 127) {
codeDeltaNext++;
} else {
- codeDeltaNext += 5; /* 1 byte for 0xFF, 4 for positive delta */
+ codeDeltaNext += 5; /* 1 byte for 0xFF, 4 for positive delta */
}
prevCodeOffset = mapPtr[i].codeOffset;
@@ -3340,14 +4432,14 @@ GetCmdLocEncodingSize(
} else if (codeLen <= 127) {
codeLengthNext++;
} else {
- codeLengthNext += 5; /* 1 byte for 0xFF, 4 for length */
+ codeLengthNext += 5;/* 1 byte for 0xFF, 4 for length */
}
- srcDelta = (mapPtr[i].srcOffset - prevSrcOffset);
- if ((-127 <= srcDelta) && (srcDelta <= 127)) {
+ srcDelta = mapPtr[i].srcOffset - prevSrcOffset;
+ if ((-127 <= srcDelta) && (srcDelta <= 127) && (srcDelta != -1)) {
srcDeltaNext++;
} else {
- srcDeltaNext += 5; /* 1 byte for 0xFF, 4 for delta */
+ srcDeltaNext += 5; /* 1 byte for 0xFF, 4 for delta */
}
prevSrcOffset = mapPtr[i].srcOffset;
@@ -3357,7 +4449,7 @@ GetCmdLocEncodingSize(
} else if (srcLen <= 127) {
srcLengthNext++;
} else {
- srcLengthNext += 5; /* 1 byte for 0xFF, 4 for length */
+ srcLengthNext += 5; /* 1 byte for 0xFF, 4 for length */
}
}
@@ -3409,7 +4501,7 @@ EncodeCmdLocMap(
codePtr->codeDeltaStart = p;
prevOffset = 0;
for (i = 0; i < numCmds; i++) {
- codeDelta = (mapPtr[i].codeOffset - prevOffset);
+ codeDelta = mapPtr[i].codeOffset - prevOffset;
if (codeDelta < 0) {
Tcl_Panic("EncodeCmdLocMap: bad code offset");
} else if (codeDelta <= 127) {
@@ -3451,8 +4543,8 @@ EncodeCmdLocMap(
codePtr->srcDeltaStart = p;
prevOffset = 0;
for (i = 0; i < numCmds; i++) {
- srcDelta = (mapPtr[i].srcOffset - prevOffset);
- if ((-127 <= srcDelta) && (srcDelta <= 127)) {
+ srcDelta = mapPtr[i].srcOffset - prevOffset;
+ if ((-127 <= srcDelta) && (srcDelta <= 127) && (srcDelta != -1)) {
TclStoreInt1AtPtr(srcDelta, p);
p++;
} else {
@@ -3487,602 +4579,6 @@ EncodeCmdLocMap(
return p;
}
-#ifdef TCL_COMPILE_DEBUG
-/*
- *----------------------------------------------------------------------
- *
- * TclPrintByteCodeObj --
- *
- * This procedure prints ("disassembles") the instructions of a bytecode
- * object to stdout.
- *
- * Results:
- * None.
- *
- * Side effects:
- * None.
- *
- *----------------------------------------------------------------------
- */
-
-void
-TclPrintByteCodeObj(
- Tcl_Interp *interp, /* Used only for Tcl_GetStringFromObj. */
- Tcl_Obj *objPtr) /* The bytecode object to disassemble. */
-{
- Tcl_Obj *bufPtr = TclDisassembleByteCodeObj(objPtr);
-
- fprintf(stdout, "\n%s", TclGetString(bufPtr));
- Tcl_DecrRefCount(bufPtr);
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * TclPrintInstruction --
- *
- * This procedure prints ("disassembles") one instruction from a bytecode
- * object to stdout.
- *
- * Results:
- * Returns the length in bytes of the current instruiction.
- *
- * Side effects:
- * None.
- *
- *----------------------------------------------------------------------
- */
-
-int
-TclPrintInstruction(
- ByteCode *codePtr, /* Bytecode containing the instruction. */
- unsigned char *pc) /* Points to first byte of instruction. */
-{
- Tcl_Obj *bufferObj;
- int numBytes;
-
- TclNewObj(bufferObj);
- numBytes = FormatInstruction(codePtr, pc, bufferObj);
- fprintf(stdout, "%s", TclGetString(bufferObj));
- Tcl_DecrRefCount(bufferObj);
- return numBytes;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * TclPrintObject --
- *
- * This procedure prints up to a specified number of characters from the
- * argument Tcl object's string representation to a specified file.
- *
- * Results:
- * None.
- *
- * Side effects:
- * Outputs characters to the specified file.
- *
- *----------------------------------------------------------------------
- */
-
-void
-TclPrintObject(
- FILE *outFile, /* The file to print the source to. */
- Tcl_Obj *objPtr, /* Points to the Tcl object whose string
- * representation should be printed. */
- int maxChars) /* Maximum number of chars to print. */
-{
- char *bytes;
- int length;
-
- bytes = Tcl_GetStringFromObj(objPtr, &length);
- TclPrintSource(outFile, bytes, TclMin(length, maxChars));
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * TclPrintSource --
- *
- * This procedure prints up to a specified number of characters from the
- * argument string to a specified file. It tries to produce legible
- * output by adding backslashes as necessary.
- *
- * Results:
- * None.
- *
- * Side effects:
- * Outputs characters to the specified file.
- *
- *----------------------------------------------------------------------
- */
-
-void
-TclPrintSource(
- FILE *outFile, /* The file to print the source to. */
- const char *stringPtr, /* The string to print. */
- int maxChars) /* Maximum number of chars to print. */
-{
- Tcl_Obj *bufferObj;
-
- TclNewObj(bufferObj);
- PrintSourceToObj(bufferObj, stringPtr, maxChars);
- fprintf(outFile, "%s", TclGetString(bufferObj));
- Tcl_DecrRefCount(bufferObj);
-}
-#endif /* TCL_COMPILE_DEBUG */
-
-/*
- *----------------------------------------------------------------------
- *
- * TclDisassembleByteCodeObj --
- *
- * Given an object which is of bytecode type, return a disassembled
- * version of the bytecode (in a new refcount 0 object). No guarantees
- * are made about the details of the contents of the result.
- *
- *----------------------------------------------------------------------
- */
-
-Tcl_Obj *
-TclDisassembleByteCodeObj(
- Tcl_Obj *objPtr) /* The bytecode object to disassemble. */
-{
- ByteCode *codePtr = objPtr->internalRep.twoPtrValue.ptr1;
- unsigned char *codeStart, *codeLimit, *pc;
- unsigned char *codeDeltaNext, *codeLengthNext;
- unsigned char *srcDeltaNext, *srcLengthNext;
- int codeOffset, codeLen, srcOffset, srcLen, numCmds, delta, i;
- Interp *iPtr = (Interp *) *codePtr->interpHandle;
- Tcl_Obj *bufferObj;
- char ptrBuf1[20], ptrBuf2[20];
-
- TclNewObj(bufferObj);
- if (codePtr->refCount <= 0) {
- return bufferObj; /* Already freed. */
- }
-
- codeStart = codePtr->codeStart;
- codeLimit = (codeStart + codePtr->numCodeBytes);
- numCmds = codePtr->numCommands;
-
- /*
- * Print header lines describing the ByteCode.
- */
-
- sprintf(ptrBuf1, "%p", codePtr);
- sprintf(ptrBuf2, "%p", iPtr);
- Tcl_AppendPrintfToObj(bufferObj,
- "ByteCode 0x%s, refCt %u, epoch %u, interp 0x%s (epoch %u)\n",
- ptrBuf1, codePtr->refCount, codePtr->compileEpoch, ptrBuf2,
- iPtr->compileEpoch);
- Tcl_AppendToObj(bufferObj, " Source ", -1);
- PrintSourceToObj(bufferObj, codePtr->source,
- TclMin(codePtr->numSrcBytes, 55));
- Tcl_AppendPrintfToObj(bufferObj,
- "\n Cmds %d, src %d, inst %d, litObjs %u, aux %d, stkDepth %u, code/src %.2f\n",
- numCmds, codePtr->numSrcBytes, codePtr->numCodeBytes,
- codePtr->numLitObjects, codePtr->numAuxDataItems,
- codePtr->maxStackDepth,
-#ifdef TCL_COMPILE_STATS
- codePtr->numSrcBytes?
- codePtr->structureSize/(float)codePtr->numSrcBytes :
-#endif
- 0.0);
-
-#ifdef TCL_COMPILE_STATS
- Tcl_AppendPrintfToObj(bufferObj,
- " Code %lu = header %lu+inst %d+litObj %lu+exc %lu+aux %lu+cmdMap %d\n",
- (unsigned long) codePtr->structureSize,
- (unsigned long) (sizeof(ByteCode) - sizeof(size_t) - sizeof(Tcl_Time)),
- codePtr->numCodeBytes,
- (unsigned long) (codePtr->numLitObjects * sizeof(Tcl_Obj *)),
- (unsigned long) (codePtr->numExceptRanges*sizeof(ExceptionRange)),
- (unsigned long) (codePtr->numAuxDataItems * sizeof(AuxData)),
- codePtr->numCmdLocBytes);
-#endif /* TCL_COMPILE_STATS */
-
- /*
- * If the ByteCode is the compiled body of a Tcl procedure, print
- * information about that procedure. Note that we don't know the
- * procedure's name since ByteCode's can be shared among procedures.
- */
-
- if (codePtr->procPtr != NULL) {
- Proc *procPtr = codePtr->procPtr;
- int numCompiledLocals = procPtr->numCompiledLocals;
-
- sprintf(ptrBuf1, "%p", procPtr);
- Tcl_AppendPrintfToObj(bufferObj,
- " Proc 0x%s, refCt %d, args %d, compiled locals %d\n",
- ptrBuf1, procPtr->refCount, procPtr->numArgs,
- numCompiledLocals);
- if (numCompiledLocals > 0) {
- CompiledLocal *localPtr = procPtr->firstLocalPtr;
-
- for (i = 0; i < numCompiledLocals; i++) {
- Tcl_AppendPrintfToObj(bufferObj,
- " slot %d%s%s%s%s%s%s", i,
- (localPtr->flags & (VAR_ARRAY|VAR_LINK)) ? "" : ", scalar",
- (localPtr->flags & VAR_ARRAY) ? ", array" : "",
- (localPtr->flags & VAR_LINK) ? ", link" : "",
- (localPtr->flags & VAR_ARGUMENT) ? ", arg" : "",
- (localPtr->flags & VAR_TEMPORARY) ? ", temp" : "",
- (localPtr->flags & VAR_RESOLVED) ? ", resolved" : "");
- if (TclIsVarTemporary(localPtr)) {
- Tcl_AppendToObj(bufferObj, "\n", -1);
- } else {
- Tcl_AppendPrintfToObj(bufferObj, ", \"%s\"\n",
- localPtr->name);
- }
- localPtr = localPtr->nextPtr;
- }
- }
- }
-
- /*
- * Print the ExceptionRange array.
- */
-
- if (codePtr->numExceptRanges > 0) {
- Tcl_AppendPrintfToObj(bufferObj, " Exception ranges %d, depth %d:\n",
- codePtr->numExceptRanges, codePtr->maxExceptDepth);
- for (i = 0; i < codePtr->numExceptRanges; i++) {
- ExceptionRange *rangePtr = &(codePtr->exceptArrayPtr[i]);
-
- Tcl_AppendPrintfToObj(bufferObj,
- " %d: level %d, %s, pc %d-%d, ",
- i, rangePtr->nestingLevel,
- (rangePtr->type==LOOP_EXCEPTION_RANGE ? "loop" : "catch"),
- rangePtr->codeOffset,
- (rangePtr->codeOffset + rangePtr->numCodeBytes - 1));
- switch (rangePtr->type) {
- case LOOP_EXCEPTION_RANGE:
- Tcl_AppendPrintfToObj(bufferObj, "continue %d, break %d\n",
- rangePtr->continueOffset, rangePtr->breakOffset);
- break;
- case CATCH_EXCEPTION_RANGE:
- Tcl_AppendPrintfToObj(bufferObj, "catch %d\n",
- rangePtr->catchOffset);
- break;
- default:
- Tcl_Panic("TclDisassembleByteCodeObj: bad ExceptionRange type %d",
- rangePtr->type);
- }
- }
- }
-
- /*
- * If there were no commands (e.g., an expression or an empty string was
- * compiled), just print all instructions and return.
- */
-
- if (numCmds == 0) {
- pc = codeStart;
- while (pc < codeLimit) {
- Tcl_AppendToObj(bufferObj, " ", -1);
- pc += FormatInstruction(codePtr, pc, bufferObj);
- }
- return bufferObj;
- }
-
- /*
- * Print table showing the code offset, source offset, and source length
- * for each command. These are encoded as a sequence of bytes.
- */
-
- Tcl_AppendPrintfToObj(bufferObj, " Commands %d:", numCmds);
- codeDeltaNext = codePtr->codeDeltaStart;
- codeLengthNext = codePtr->codeLengthStart;
- srcDeltaNext = codePtr->srcDeltaStart;
- srcLengthNext = codePtr->srcLengthStart;
- codeOffset = srcOffset = 0;
- for (i = 0; i < numCmds; i++) {
- if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) {
- codeDeltaNext++;
- delta = TclGetInt4AtPtr(codeDeltaNext);
- codeDeltaNext += 4;
- } else {
- delta = TclGetInt1AtPtr(codeDeltaNext);
- codeDeltaNext++;
- }
- codeOffset += delta;
-
- if ((unsigned) *codeLengthNext == (unsigned) 0xFF) {
- codeLengthNext++;
- codeLen = TclGetInt4AtPtr(codeLengthNext);
- codeLengthNext += 4;
- } else {
- codeLen = TclGetInt1AtPtr(codeLengthNext);
- codeLengthNext++;
- }
-
- if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) {
- srcDeltaNext++;
- delta = TclGetInt4AtPtr(srcDeltaNext);
- srcDeltaNext += 4;
- } else {
- delta = TclGetInt1AtPtr(srcDeltaNext);
- srcDeltaNext++;
- }
- srcOffset += delta;
-
- if ((unsigned) *srcLengthNext == (unsigned) 0xFF) {
- srcLengthNext++;
- srcLen = TclGetInt4AtPtr(srcLengthNext);
- srcLengthNext += 4;
- } else {
- srcLen = TclGetInt1AtPtr(srcLengthNext);
- srcLengthNext++;
- }
-
- Tcl_AppendPrintfToObj(bufferObj, "%s%4d: pc %d-%d, src %d-%d",
- ((i % 2)? " " : "\n "),
- (i+1), codeOffset, (codeOffset + codeLen - 1),
- srcOffset, (srcOffset + srcLen - 1));
- }
- if (numCmds > 0) {
- Tcl_AppendToObj(bufferObj, "\n", -1);
- }
-
- /*
- * Print each instruction. If the instruction corresponds to the start of
- * a command, print the command's source. Note that we don't need the code
- * length here.
- */
-
- codeDeltaNext = codePtr->codeDeltaStart;
- srcDeltaNext = codePtr->srcDeltaStart;
- srcLengthNext = codePtr->srcLengthStart;
- codeOffset = srcOffset = 0;
- pc = codeStart;
- for (i = 0; i < numCmds; i++) {
- if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) {
- codeDeltaNext++;
- delta = TclGetInt4AtPtr(codeDeltaNext);
- codeDeltaNext += 4;
- } else {
- delta = TclGetInt1AtPtr(codeDeltaNext);
- codeDeltaNext++;
- }
- codeOffset += delta;
-
- if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) {
- srcDeltaNext++;
- delta = TclGetInt4AtPtr(srcDeltaNext);
- srcDeltaNext += 4;
- } else {
- delta = TclGetInt1AtPtr(srcDeltaNext);
- srcDeltaNext++;
- }
- srcOffset += delta;
-
- if ((unsigned) *srcLengthNext == (unsigned) 0xFF) {
- srcLengthNext++;
- srcLen = TclGetInt4AtPtr(srcLengthNext);
- srcLengthNext += 4;
- } else {
- srcLen = TclGetInt1AtPtr(srcLengthNext);
- srcLengthNext++;
- }
-
- /*
- * Print instructions before command i.
- */
-
- while ((pc-codeStart) < codeOffset) {
- Tcl_AppendToObj(bufferObj, " ", -1);
- pc += FormatInstruction(codePtr, pc, bufferObj);
- }
-
- Tcl_AppendPrintfToObj(bufferObj, " Command %d: ", i+1);
- PrintSourceToObj(bufferObj, (codePtr->source + srcOffset),
- TclMin(srcLen, 55));
- Tcl_AppendToObj(bufferObj, "\n", -1);
- }
- if (pc < codeLimit) {
- /*
- * Print instructions after the last command.
- */
-
- while (pc < codeLimit) {
- Tcl_AppendToObj(bufferObj, " ", -1);
- pc += FormatInstruction(codePtr, pc, bufferObj);
- }
- }
- return bufferObj;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * FormatInstruction --
- *
- * Appends a representation of a bytecode instruction to a Tcl_Obj.
- *
- *----------------------------------------------------------------------
- */
-
-static int
-FormatInstruction(
- ByteCode *codePtr, /* Bytecode containing the instruction. */
- unsigned char *pc, /* Points to first byte of instruction. */
- Tcl_Obj *bufferObj) /* Object to append instruction info to. */
-{
- Proc *procPtr = codePtr->procPtr;
- unsigned char opCode = *pc;
- register InstructionDesc *instDesc = &tclInstructionTable[opCode];
- unsigned char *codeStart = codePtr->codeStart;
- unsigned pcOffset = pc - codeStart;
- int opnd = 0, i, j, numBytes = 1;
- int localCt = procPtr ? procPtr->numCompiledLocals : 0;
- CompiledLocal *localPtr = procPtr ? procPtr->firstLocalPtr : NULL;
- char suffixBuffer[128]; /* Additional info to print after main opcode
- * and immediates. */
- char *suffixSrc = NULL;
- Tcl_Obj *suffixObj = NULL;
- AuxData *auxPtr = NULL;
-
- suffixBuffer[0] = '\0';
- Tcl_AppendPrintfToObj(bufferObj, "(%u) %s ", pcOffset, instDesc->name);
- for (i = 0; i < instDesc->numOperands; i++) {
- switch (instDesc->opTypes[i]) {
- case OPERAND_INT1:
- opnd = TclGetInt1AtPtr(pc+numBytes); numBytes++;
- if (opCode == INST_JUMP1 || opCode == INST_JUMP_TRUE1
- || opCode == INST_JUMP_FALSE1) {
- sprintf(suffixBuffer, "pc %u", pcOffset+opnd);
- }
- Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd);
- break;
- case OPERAND_INT4:
- opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4;
- if (opCode == INST_JUMP4 || opCode == INST_JUMP_TRUE4
- || opCode == INST_JUMP_FALSE4) {
- sprintf(suffixBuffer, "pc %u", pcOffset+opnd);
- } else if (opCode == INST_START_CMD) {
- sprintf(suffixBuffer, "next cmd at pc %u", pcOffset+opnd);
- }
- Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd);
- break;
- case OPERAND_UINT1:
- opnd = TclGetUInt1AtPtr(pc+numBytes); numBytes++;
- if (opCode == INST_PUSH1) {
- suffixObj = codePtr->objArrayPtr[opnd];
- }
- Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd);
- break;
- case OPERAND_AUX4:
- case OPERAND_UINT4:
- opnd = TclGetUInt4AtPtr(pc+numBytes); numBytes += 4;
- if (opCode == INST_PUSH4) {
- suffixObj = codePtr->objArrayPtr[opnd];
- } else if (opCode == INST_START_CMD && opnd != 1) {
- sprintf(suffixBuffer+strlen(suffixBuffer),
- ", %u cmds start here", opnd);
- }
- Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd);
- if (instDesc->opTypes[i] == OPERAND_AUX4) {
- auxPtr = &codePtr->auxDataArrayPtr[opnd];
- }
- break;
- case OPERAND_IDX4:
- opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4;
- if (opnd >= -1) {
- Tcl_AppendPrintfToObj(bufferObj, "%d ", opnd);
- } else if (opnd == -2) {
- Tcl_AppendPrintfToObj(bufferObj, "end ");
- } else {
- Tcl_AppendPrintfToObj(bufferObj, "end-%d ", -2-opnd);
- }
- break;
- case OPERAND_LVT1:
- opnd = TclGetUInt1AtPtr(pc+numBytes);
- numBytes++;
- goto printLVTindex;
- case OPERAND_LVT4:
- opnd = TclGetUInt4AtPtr(pc+numBytes);
- numBytes += 4;
- printLVTindex:
- if (localPtr != NULL) {
- if (opnd >= localCt) {
- Tcl_Panic("FormatInstruction: bad local var index %u (%u locals)",
- (unsigned) opnd, localCt);
- }
- for (j = 0; j < opnd; j++) {
- localPtr = localPtr->nextPtr;
- }
- if (TclIsVarTemporary(localPtr)) {
- sprintf(suffixBuffer, "temp var %u", (unsigned) opnd);
- } else {
- sprintf(suffixBuffer, "var ");
- suffixSrc = localPtr->name;
- }
- }
- Tcl_AppendPrintfToObj(bufferObj, "%%v%u ", (unsigned) opnd);
- break;
- case OPERAND_NONE:
- default:
- break;
- }
- }
- if (suffixObj) {
- char *bytes;
- int length;
-
- Tcl_AppendToObj(bufferObj, "\t# ", -1);
- bytes = Tcl_GetStringFromObj(codePtr->objArrayPtr[opnd], &length);
- PrintSourceToObj(bufferObj, bytes, TclMin(length, 40));
- } else if (suffixBuffer[0]) {
- Tcl_AppendPrintfToObj(bufferObj, "\t# %s", suffixBuffer);
- if (suffixSrc) {
- PrintSourceToObj(bufferObj, suffixSrc, 40);
- }
- }
- Tcl_AppendToObj(bufferObj, "\n", -1);
- if (auxPtr && auxPtr->type->printProc) {
- Tcl_AppendToObj(bufferObj, "\t\t[", -1);
- auxPtr->type->printProc(auxPtr->clientData, bufferObj, codePtr,
- pcOffset);
- Tcl_AppendToObj(bufferObj, "]\n", -1);
- }
- return numBytes;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * PrintSourceToObj --
- *
- * Appends a quoted representation of a string to a Tcl_Obj.
- *
- *----------------------------------------------------------------------
- */
-
-static void
-PrintSourceToObj(
- Tcl_Obj *appendObj, /* The object to print the source to. */
- const char *stringPtr, /* The string to print. */
- int maxChars) /* Maximum number of chars to print. */
-{
- register const char *p;
- register int i = 0;
-
- if (stringPtr == NULL) {
- Tcl_AppendToObj(appendObj, "\"\"", -1);
- return;
- }
-
- Tcl_AppendToObj(appendObj, "\"", -1);
- p = stringPtr;
- for (; (*p != '\0') && (i < maxChars); p++, i++) {
- switch (*p) {
- case '"':
- Tcl_AppendToObj(appendObj, "\\\"", -1);
- continue;
- case '\f':
- Tcl_AppendToObj(appendObj, "\\f", -1);
- continue;
- case '\n':
- Tcl_AppendToObj(appendObj, "\\n", -1);
- continue;
- case '\r':
- Tcl_AppendToObj(appendObj, "\\r", -1);
- continue;
- case '\t':
- Tcl_AppendToObj(appendObj, "\\t", -1);
- continue;
- case '\v':
- Tcl_AppendToObj(appendObj, "\\v", -1);
- continue;
- default:
- Tcl_AppendPrintfToObj(appendObj, "%c", *p);
- continue;
- }
- }
- Tcl_AppendToObj(appendObj, "\"", -1);
-}
-
#ifdef TCL_COMPILE_STATS
/*
*----------------------------------------------------------------------
@@ -4125,7 +4621,7 @@ RecordByteCodeStats(
statsPtr->currentByteCodeBytes += (double) codePtr->structureSize;
statsPtr->srcCount[TclLog2(codePtr->numSrcBytes)]++;
- statsPtr->byteCodeCount[TclLog2((int)(codePtr->structureSize))]++;
+ statsPtr->byteCodeCount[TclLog2((int) codePtr->structureSize)]++;
statsPtr->currentInstBytes += (double) codePtr->numCodeBytes;
statsPtr->currentLitBytes += (double)
@@ -4143,5 +4639,6 @@ RecordByteCodeStats(
* mode: c
* c-basic-offset: 4
* fill-column: 78
+ * tab-width: 8
* End:
*/