diff options
Diffstat (limited to 'generic/tclDate.c')
| -rw-r--r-- | generic/tclDate.c | 1542 |
1 files changed, 682 insertions, 860 deletions
diff --git a/generic/tclDate.c b/generic/tclDate.c index 99a01d8..1aa954b 100644 --- a/generic/tclDate.c +++ b/generic/tclDate.c @@ -1,3 +1,13 @@ +#ifndef lint +static char TclDatesccsid[] = "@(#)yaccpar 1.9 (Berkeley) 02/21/93"; +#endif +#define YYBYACC 1 +#define YYMAJOR 1 +#define YYMINOR 9 +#define TclDateclearin (TclDatechar=(-1)) +#define TclDateerrok (TclDateerrflag=0) +#define YYRECOVERING (TclDateerrflag!=0) +#define YYPREFIX "TclDate" /* * tclDate.c -- * @@ -10,7 +20,7 @@ * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * - * RCS: @(#) $Id: tclDate.c,v 1.7 1999/12/08 03:49:51 hobbs Exp $ + * RCS: @(#) $Id: tclDate.c,v 1.8 2000/01/11 02:35:11 ericm Exp $ */ #include "tclInt.h" @@ -110,72 +120,244 @@ static int TclDatelex _ANSI_ARGS_((void)); int TclDateparse _ANSI_ARGS_((void)); -typedef union -#ifdef __cplusplus - YYSTYPE -#endif - { +typedef union { time_t Number; enum _MERIDIAN Meridian; } YYSTYPE; -# define tAGO 257 -# define tDAY 258 -# define tDAYZONE 259 -# define tID 260 -# define tMERIDIAN 261 -# define tMINUTE_UNIT 262 -# define tMONTH 263 -# define tMONTH_UNIT 264 -# define tSEC_UNIT 265 -# define tSNUMBER 266 -# define tUNUMBER 267 -# define tZONE 268 -# define tEPOCH 269 -# define tDST 270 - - - - -#if defined(__cplusplus) || defined(__STDC__) - -#if defined(__cplusplus) && defined(__EXTERN_C__) -extern "C" { -#endif -#ifndef TclDateerror -#if defined(__cplusplus) - void TclDateerror(CONST char *); -#endif +#define tAGO 257 +#define tDAY 258 +#define tDAYZONE 259 +#define tID 260 +#define tMERIDIAN 261 +#define tMINUTE_UNIT 262 +#define tMONTH 263 +#define tMONTH_UNIT 264 +#define tSEC_UNIT 265 +#define tSNUMBER 266 +#define tUNUMBER 267 +#define tZONE 268 +#define tEPOCH 269 +#define tDST 270 +#define tISOBASE 271 +#define YYERRCODE 256 +short TclDatelhs[] = { -1, + 0, 0, 2, 2, 2, 2, 2, 2, 2, 3, + 3, 3, 3, 3, 4, 4, 4, 6, 6, 6, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 8, 8, 8, 7, 7, 10, 10, 10, 10, 10, + 10, 10, 10, 10, 9, 1, 1, +}; +short TclDatelen[] = { 2, + 0, 2, 1, 1, 1, 1, 1, 1, 1, 2, + 4, 5, 6, 7, 2, 1, 1, 1, 2, 2, + 3, 5, 1, 5, 5, 2, 4, 2, 1, 3, + 3, 7, 2, 2, 1, 2, 3, 1, 3, 2, + 1, 3, 2, 1, 1, 0, 1, +}; +short TclDatedefred[] = { 1, + 0, 0, 17, 38, 0, 44, 41, 0, 0, 29, + 0, 0, 2, 3, 4, 5, 6, 7, 8, 9, + 0, 19, 0, 20, 10, 36, 0, 43, 40, 0, + 0, 0, 15, 0, 33, 0, 34, 0, 30, 0, + 0, 0, 0, 0, 31, 37, 42, 39, 27, 47, + 0, 0, 11, 0, 0, 0, 0, 0, 12, 24, + 25, 22, 0, 0, 13, 0, 14, 32, +}; +short TclDatedgoto[] = { 1, + 53, 13, 14, 15, 16, 17, 18, 19, 20, 21, +}; +short TclDatesindex[] = { 0, + -45, -36, 0, 0, -263, 0, 0, -33, -254, 0, + -258, -246, 0, 0, 0, 0, 0, 0, 0, 0, + -248, 0, -22, 0, 0, 0, -244, 0, 0, -243, + -261, -241, 0, -264, 0, -245, 0, -240, 0, -40, + -17, -15, -16, -26, 0, 0, 0, 0, 0, 0, + -234, -233, 0, -232, -231, -230, -229, -34, 0, 0, + 0, 0, -19, -227, 0, -226, 0, 0, +}; +short TclDaterindex[] = { 0, + 0, 1, 0, 0, 0, 0, 0, 92, 15, 0, + 106, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 29, 0, 43, 0, 0, 0, 71, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 85, + 0, 0, 57, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 85, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, +}; +short TclDategindex[] = { 0, + -14, 0, 0, 0, 0, 0, 0, 0, 0, 0, +}; +#define YYTABLESIZE 375 +short TclDatetable[] = { 12, + 18, 41, 44, 23, 52, 42, 45, 22, 37, 34, + 64, 31, 35, 32, 16, 33, 46, 51, 47, 48, + 36, 38, 39, 40, 30, 43, 49, 54, 35, 55, + 56, 57, 58, 59, 60, 61, 62, 63, 66, 67, + 68, 0, 26, 65, 0, 18, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 21, 0, 0, 16, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 28, 0, 0, 35, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 46, 0, 0, 26, 0, 0, + 0, 45, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 21, 0, 0, 0, 23, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 28, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 23, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 2, 3, 0, 0, 4, 5, 6, 7, + 50, 8, 9, 10, 24, 11, 50, 25, 26, 27, + 28, 29, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 18, 18, + 0, 0, 18, 18, 18, 18, 0, 18, 18, 18, + 0, 18, 16, 16, 0, 0, 16, 16, 16, 16, + 0, 16, 16, 16, 0, 16, 35, 35, 0, 0, + 35, 35, 35, 35, 0, 35, 35, 35, 0, 35, + 26, 26, 0, 0, 26, 26, 26, 26, 0, 26, + 26, 26, 0, 26, 21, 21, 0, 0, 21, 21, + 21, 21, 0, 21, 21, 21, 0, 21, 28, 28, + 0, 0, 28, 28, 28, 28, 0, 0, 28, 28, + 0, 28, 46, 46, 0, 0, 46, 46, 46, 46, + 45, 46, 46, 46, 0, 46, 0, 0, 45, 45, + 45, 0, 45, 23, 23, 0, 0, 23, 23, 23, + 23, 0, 23, 0, 23, +}; +short TclDatecheck[] = { 45, + 0, 263, 267, 267, 45, 267, 271, 44, 257, 268, + 45, 45, 271, 47, 0, 270, 262, 58, 264, 265, + 267, 44, 267, 267, 58, 267, 267, 45, 0, 45, + 47, 58, 267, 267, 267, 267, 267, 267, 58, 267, + 267, -1, 0, 58, -1, 45, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, 0, -1, -1, 45, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + 0, -1, -1, 45, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, 0, -1, -1, 45, -1, -1, + -1, 0, -1, -1, -1, -1, -1, -1, -1, -1, + -1, 45, -1, -1, -1, 0, -1, -1, -1, -1, + -1, -1, -1, -1, -1, 45, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + 45, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, 258, 259, -1, -1, 262, 263, 264, 265, + 261, 267, 268, 269, 258, 271, 261, 261, 262, 263, + 264, 265, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, 258, 259, + -1, -1, 262, 263, 264, 265, -1, 267, 268, 269, + -1, 271, 258, 259, -1, -1, 262, 263, 264, 265, + -1, 267, 268, 269, -1, 271, 258, 259, -1, -1, + 262, 263, 264, 265, -1, 267, 268, 269, -1, 271, + 258, 259, -1, -1, 262, 263, 264, 265, -1, 267, + 268, 269, -1, 271, 258, 259, -1, -1, 262, 263, + 264, 265, -1, 267, 268, 269, -1, 271, 258, 259, + -1, -1, 262, 263, 264, 265, -1, -1, 268, 269, + -1, 271, 258, 259, -1, -1, 262, 263, 264, 265, + 259, 267, 268, 269, -1, 271, -1, -1, 267, 268, + 269, -1, 271, 258, 259, -1, -1, 262, 263, 264, + 265, -1, 267, -1, 269, +}; +#define YYFINAL 1 +#ifndef YYDEBUG +#define YYDEBUG 0 #endif -#ifndef TclDatelex - int TclDatelex(void); +#define YYMAXTOKEN 271 +#if YYDEBUG +char *TclDatename[] = { +"end-of-file",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,"','","'-'",0,"'/'",0,0,0,0,0,0,0,0,0,0,"':'",0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"tAGO","tDAY", +"tDAYZONE","tID","tMERIDIAN","tMINUTE_UNIT","tMONTH","tMONTH_UNIT","tSEC_UNIT", +"tSNUMBER","tUNUMBER","tZONE","tEPOCH","tDST","tISOBASE", +}; +char *TclDaterule[] = { +"$accept : spec", +"spec :", +"spec : spec item", +"item : time", +"item : zone", +"item : date", +"item : day", +"item : rel", +"item : iso", +"item : number", +"time : tUNUMBER tMERIDIAN", +"time : tUNUMBER ':' tUNUMBER o_merid", +"time : tUNUMBER ':' tUNUMBER '-' tUNUMBER", +"time : tUNUMBER ':' tUNUMBER ':' tUNUMBER o_merid", +"time : tUNUMBER ':' tUNUMBER ':' tUNUMBER '-' tUNUMBER", +"zone : tZONE tDST", +"zone : tZONE", +"zone : tDAYZONE", +"day : tDAY", +"day : tDAY ','", +"day : tUNUMBER tDAY", +"date : tUNUMBER '/' tUNUMBER", +"date : tUNUMBER '/' tUNUMBER '/' tUNUMBER", +"date : tISOBASE", +"date : tUNUMBER '-' tMONTH '-' tUNUMBER", +"date : tUNUMBER '-' tUNUMBER '-' tUNUMBER", +"date : tMONTH tUNUMBER", +"date : tMONTH tUNUMBER ',' tUNUMBER", +"date : tUNUMBER tMONTH", +"date : tEPOCH", +"date : tUNUMBER tMONTH tUNUMBER", +"iso : tISOBASE tZONE tISOBASE", +"iso : tISOBASE tZONE tUNUMBER ':' tUNUMBER ':' tUNUMBER", +"iso : tISOBASE tISOBASE", +"rel : relunit tAGO", +"rel : relunit", +"relunit : tUNUMBER tMINUTE_UNIT", +"relunit : '-' tUNUMBER tMINUTE_UNIT", +"relunit : tMINUTE_UNIT", +"relunit : '-' tUNUMBER tSEC_UNIT", +"relunit : tUNUMBER tSEC_UNIT", +"relunit : tSEC_UNIT", +"relunit : '-' tUNUMBER tMONTH_UNIT", +"relunit : tUNUMBER tMONTH_UNIT", +"relunit : tMONTH_UNIT", +"number : tUNUMBER", +"o_merid :", +"o_merid : tMERIDIAN", +}; #endif - int TclDateparse(void); -#if defined(__cplusplus) && defined(__EXTERN_C__) -} +#ifdef YYSTACKSIZE +#undef YYMAXDEPTH +#define YYMAXDEPTH YYSTACKSIZE +#else +#ifdef YYMAXDEPTH +#define YYSTACKSIZE YYMAXDEPTH +#else +#define YYSTACKSIZE 500 +#define YYMAXDEPTH 500 #endif - #endif - -#define TclDateclearin TclDatechar = -1 -#define TclDateerrok TclDateerrflag = 0 -extern int TclDatechar; -extern int TclDateerrflag; -YYSTYPE TclDatelval; +int TclDatedebug; +int TclDatenerrs; +int TclDateerrflag; +int TclDatechar; +short *TclDatessp; +YYSTYPE *TclDatevsp; YYSTYPE TclDateval; -typedef int TclDatetabelem; -#ifndef YYMAXDEPTH -#define YYMAXDEPTH 150 -#endif -#if YYMAXDEPTH > 0 -int TclDate_TclDates[YYMAXDEPTH], *TclDates = TclDate_TclDates; -YYSTYPE TclDate_TclDatev[YYMAXDEPTH], *TclDatev = TclDate_TclDatev; -#else /* user does initial allocation */ -int *TclDates; -YYSTYPE *TclDatev; -#endif -static int TclDatemaxdepth = YYMAXDEPTH; -# define YYERRCODE 256 - +YYSTYPE TclDatelval; +short TclDatess[YYSTACKSIZE]; +YYSTYPE TclDatevs[YYSTACKSIZE]; +#define TclDatestacksize YYSTACKSIZE /* * Month and day table. @@ -238,7 +420,7 @@ static TABLE OtherTable[] = { { "next", tUNUMBER, 2 }, #if 0 { "first", tUNUMBER, 1 }, -/* { "second", tUNUMBER, 2 }, */ + { "second", tUNUMBER, 2 }, { "third", tUNUMBER, 3 }, { "fourth", tUNUMBER, 4 }, { "fifth", tUNUMBER, 5 }, @@ -667,27 +849,17 @@ TclDatelex() TclDateInput++; } - if (isdigit(UCHAR(c = *TclDateInput)) || c == '-' || c == '+') { /* INTL: digit */ - if (c == '-' || c == '+') { - sign = c == '-' ? -1 : 1; - if (!isdigit(UCHAR(*++TclDateInput))) { /* INTL: digit */ - /* - * skip the '-' sign - */ - continue; - } - } else { - sign = 0; - } + if (isdigit(UCHAR(c = *TclDateInput))) { /* INTL: digit */ for (TclDatelval.Number = 0; isdigit(UCHAR(c = *TclDateInput++)); ) { /* INTL: digit */ TclDatelval.Number = 10 * TclDatelval.Number + c - '0'; } TclDateInput--; - if (sign < 0) { - TclDatelval.Number = -TclDatelval.Number; + if (TclDatelval.Number >= 100000) { + return tISOBASE; + } else { + return tUNUMBER; } - return sign ? tSNUMBER : tUNUMBER; } if (!(c & 0x80) && isalpha(UCHAR(c))) { /* INTL: ISO only. */ for (p = buff; isalpha(UCHAR(c = *TclDateInput++)) /* INTL: ISO only. */ @@ -792,7 +964,8 @@ TclGetDate(p, now, zone, timePtr) } else { Start = now; if (!TclDateHaveRel) { - Start -= ((tm->tm_hour * 60L) + tm->tm_min * 60L) + tm->tm_sec; + Start -= ((tm->tm_hour * 60L * 60L) + + tm->tm_min * 60L) + tm->tm_sec; } } @@ -810,837 +983,486 @@ TclGetDate(p, now, zone, timePtr) *timePtr = Start; return 0; } -static CONST TclDatetabelem TclDateexca[] ={ --1, 1, - 0, -1, - -2, 0, - }; -# define YYNPROD 41 -# define YYLAST 227 -static CONST TclDatetabelem TclDateact[]={ - - 14, 11, 23, 28, 17, 12, 19, 18, 16, 9, - 10, 13, 42, 21, 46, 45, 44, 48, 41, 37, - 36, 35, 32, 29, 34, 33, 31, 43, 39, 38, - 30, 15, 8, 7, 6, 5, 4, 3, 2, 1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 47, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 22, 0, 0, 20, 25, 24, 27, - 26, 42, 0, 0, 0, 0, 40 }; -static CONST TclDatetabelem TclDatepact[]={ - --10000000, -258,-10000000,-10000000,-10000000,-10000000,-10000000,-10000000,-10000000, -45, - -267,-10000000, -244,-10000000, -14, -231, -240,-10000000,-10000000,-10000000, --10000000, -246,-10000000, -247, -248,-10000000,-10000000,-10000000,-10000000, -15, --10000000,-10000000,-10000000,-10000000,-10000000, -40, -20,-10000000, -251,-10000000, --10000000, -252,-10000000, -253,-10000000, -249,-10000000,-10000000,-10000000 }; -static CONST TclDatetabelem TclDatepgo[]={ - - 0, 28, 39, 38, 37, 36, 35, 34, 33, 32, - 31 }; -static CONST TclDatetabelem TclDater1[]={ - - 0, 2, 2, 3, 3, 3, 3, 3, 3, 4, - 4, 4, 4, 4, 5, 5, 5, 7, 7, 7, - 6, 6, 6, 6, 6, 6, 6, 8, 8, 10, - 10, 10, 10, 10, 10, 10, 10, 10, 9, 1, - 1 }; -static CONST TclDatetabelem TclDater2[]={ - - 0, 0, 4, 3, 3, 3, 3, 3, 2, 5, - 9, 9, 13, 13, 5, 3, 3, 3, 5, 5, - 7, 11, 5, 9, 5, 3, 7, 5, 2, 5, - 5, 3, 5, 5, 3, 5, 5, 3, 3, 1, - 3 }; -static CONST TclDatetabelem TclDatechk[]={ - --10000000, -2, -3, -4, -5, -6, -7, -8, -9, 267, - 268, 259, 263, 269, 258, -10, 266, 262, 265, 264, - 261, 58, 258, 47, 263, 262, 265, 264, 270, 267, - 44, 257, 262, 265, 264, 267, 267, 267, 44, -1, - 266, 58, 261, 47, 267, 267, 267, -1, 266 }; -static CONST TclDatetabelem TclDatedef[]={ - - 1, -2, 2, 3, 4, 5, 6, 7, 8, 38, - 15, 16, 0, 25, 17, 28, 0, 31, 34, 37, - 9, 0, 19, 0, 24, 29, 33, 36, 14, 22, - 18, 27, 30, 32, 35, 39, 20, 26, 0, 10, - 11, 0, 40, 0, 23, 39, 21, 12, 13 }; -typedef struct -#ifdef __cplusplus - TclDatetoktype -#endif -{ char *t_name; int t_val; } TclDatetoktype; -#ifndef YYDEBUG -# define YYDEBUG 0 /* don't allow debugging */ -#endif - -#if YYDEBUG - -TclDatetoktype TclDatetoks[] = -{ - "tAGO", 257, - "tDAY", 258, - "tDAYZONE", 259, - "tID", 260, - "tMERIDIAN", 261, - "tMINUTE_UNIT", 262, - "tMONTH", 263, - "tMONTH_UNIT", 264, - "tSEC_UNIT", 265, - "tSNUMBER", 266, - "tUNUMBER", 267, - "tZONE", 268, - "tEPOCH", 269, - "tDST", 270, - "-unknown-", -1 /* ends search */ -}; - -char * TclDatereds[] = +#define YYABORT goto TclDateabort +#define YYREJECT goto TclDateabort +#define YYACCEPT goto TclDateaccept +#define YYERROR goto TclDateerrlab +int +TclDateparse() { - "-no such reduction-", - "spec : /* empty */", - "spec : spec item", - "item : time", - "item : zone", - "item : date", - "item : day", - "item : rel", - "item : number", - "time : tUNUMBER tMERIDIAN", - "time : tUNUMBER ':' tUNUMBER o_merid", - "time : tUNUMBER ':' tUNUMBER tSNUMBER", - "time : tUNUMBER ':' tUNUMBER ':' tUNUMBER o_merid", - "time : tUNUMBER ':' tUNUMBER ':' tUNUMBER tSNUMBER", - "zone : tZONE tDST", - "zone : tZONE", - "zone : tDAYZONE", - "day : tDAY", - "day : tDAY ','", - "day : tUNUMBER tDAY", - "date : tUNUMBER '/' tUNUMBER", - "date : tUNUMBER '/' tUNUMBER '/' tUNUMBER", - "date : tMONTH tUNUMBER", - "date : tMONTH tUNUMBER ',' tUNUMBER", - "date : tUNUMBER tMONTH", - "date : tEPOCH", - "date : tUNUMBER tMONTH tUNUMBER", - "rel : relunit tAGO", - "rel : relunit", - "relunit : tUNUMBER tMINUTE_UNIT", - "relunit : tSNUMBER tMINUTE_UNIT", - "relunit : tMINUTE_UNIT", - "relunit : tSNUMBER tSEC_UNIT", - "relunit : tUNUMBER tSEC_UNIT", - "relunit : tSEC_UNIT", - "relunit : tSNUMBER tMONTH_UNIT", - "relunit : tUNUMBER tMONTH_UNIT", - "relunit : tMONTH_UNIT", - "number : tUNUMBER", - "o_merid : /* empty */", - "o_merid : tMERIDIAN", -}; -#endif /* YYDEBUG */ -/* - * Copyright (c) 1993 by Sun Microsystems, Inc. - */ - - -/* -** Skeleton parser driver for yacc output -*/ - -/* -** yacc user known macros and defines -*/ -#define YYERROR goto TclDateerrlab -#define YYACCEPT return(0) -#define YYABORT return(1) -#define YYBACKUP( newtoken, newvalue )\ -{\ - if ( TclDatechar >= 0 || ( TclDater2[ TclDatetmp ] >> 1 ) != 1 )\ - {\ - TclDateerror( "syntax error - cannot backup" );\ - goto TclDateerrlab;\ - }\ - TclDatechar = newtoken;\ - TclDatestate = *TclDateps;\ - TclDatelval = newvalue;\ - goto TclDatenewstate;\ -} -#define YYRECOVERING() (!!TclDateerrflag) -#define YYNEW(type) malloc(sizeof(type) * TclDatenewmax) -#define YYCOPY(to, from, type) \ - (type *) memcpy(to, (char *) from, TclDatemaxdepth * sizeof (type)) -#define YYENLARGE( from, type) \ - (type *) realloc((char *) from, TclDatenewmax * sizeof(type)) -#ifndef YYDEBUG -# define YYDEBUG 1 /* make debugging available */ + register int TclDatem, TclDaten, TclDatestate; +#if YYDEBUG + register char *TclDates; + extern char *getenv(); + + if (TclDates = getenv("YYDEBUG")) + { + TclDaten = *TclDates; + if (TclDaten >= '0' && TclDaten <= '9') + TclDatedebug = TclDaten - '0'; + } #endif -/* -** user known globals -*/ -int TclDatedebug; /* set to 1 to get debugging */ - -/* -** driver internal defines -*/ -#define YYFLAG (-10000000) - -/* -** global variables used by the parser -*/ -YYSTYPE *TclDatepv; /* top of value stack */ -int *TclDateps; /* top of state stack */ - -int TclDatestate; /* current state */ -int TclDatetmp; /* extra var (lasts between blocks) */ - -int TclDatenerrs; /* number of errors */ -int TclDateerrflag; /* error recovery flag */ -int TclDatechar; /* current input token number */ - + TclDatenerrs = 0; + TclDateerrflag = 0; + TclDatechar = (-1); + TclDatessp = TclDatess; + TclDatevsp = TclDatevs; + *TclDatessp = TclDatestate = 0; -#ifdef YYNMBCHARS -#define YYLEX() TclDatecvtok(TclDatelex()) -/* -** TclDatecvtok - return a token if i is a wchar_t value that exceeds 255. -** If i<255, i itself is the token. If i>255 but the neither -** of the 30th or 31st bit is on, i is already a token. -*/ -#if defined(__STDC__) || defined(__cplusplus) -int TclDatecvtok(int i) -#else -int TclDatecvtok(i) int i; -#endif -{ - int first = 0; - int last = YYNMBCHARS - 1; - int mid; - wchar_t j; - - if(i&0x60000000){/*Must convert to a token. */ - if( TclDatembchars[last].character < i ){ - return i;/*Giving up*/ - } - while ((last>=first)&&(first>=0)) {/*Binary search loop*/ - mid = (first+last)/2; - j = TclDatembchars[mid].character; - if( j==i ){/*Found*/ - return TclDatembchars[mid].tvalue; - }else if( j<i ){ - first = mid + 1; - }else{ - last = mid -1; - } - } - /*No entry in the table.*/ - return i;/* Giving up.*/ - }else{/* i is already a token. */ - return i; - } -} -#else/*!YYNMBCHARS*/ -#define YYLEX() TclDatelex() -#endif/*!YYNMBCHARS*/ - -/* -** TclDateparse - return 0 if worked, 1 if syntax error not recovered from -*/ -#if defined(__STDC__) || defined(__cplusplus) -int TclDateparse(void) -#else -int TclDateparse() +TclDateloop: + if (TclDaten = TclDatedefred[TclDatestate]) goto TclDatereduce; + if (TclDatechar < 0) + { + if ((TclDatechar = TclDatelex()) < 0) TclDatechar = 0; +#if YYDEBUG + if (TclDatedebug) + { + TclDates = 0; + if (TclDatechar <= YYMAXTOKEN) TclDates = TclDatename[TclDatechar]; + if (!TclDates) TclDates = "illegal-symbol"; + printf("%sdebug: state %d, reading %d (%s)\n", + YYPREFIX, TclDatestate, TclDatechar, TclDates); + } #endif -{ - register YYSTYPE *TclDatepvt = 0; /* top of value stack for $vars */ - -#if defined(__cplusplus) || defined(lint) -/* - hacks to please C++ and lint - goto's inside - switch should never be executed -*/ - static int __yaccpar_lint_hack__ = 0; - switch (__yaccpar_lint_hack__) - { - case 1: goto TclDateerrlab; - case 2: goto TclDatenewstate; - } + } + if ((TclDaten = TclDatesindex[TclDatestate]) && (TclDaten += TclDatechar) >= 0 && + TclDaten <= YYTABLESIZE && TclDatecheck[TclDaten] == TclDatechar) + { +#if YYDEBUG + if (TclDatedebug) + printf("%sdebug: state %d, shifting to state %d\n", + YYPREFIX, TclDatestate, TclDatetable[TclDaten]); #endif - - /* - ** Initialize externals - TclDateparse may be called more than once - */ - TclDatepv = &TclDatev[-1]; - TclDateps = &TclDates[-1]; - TclDatestate = 0; - TclDatetmp = 0; - TclDatenerrs = 0; - TclDateerrflag = 0; - TclDatechar = -1; - -#if YYMAXDEPTH <= 0 - if (TclDatemaxdepth <= 0) - { - if ((TclDatemaxdepth = YYEXPAND(0)) <= 0) - { - TclDateerror("yacc initialization error"); - YYABORT; - } - } + if (TclDatessp >= TclDatess + TclDatestacksize - 1) + { + goto TclDateoverflow; + } + *++TclDatessp = TclDatestate = TclDatetable[TclDaten]; + *++TclDatevsp = TclDatelval; + TclDatechar = (-1); + if (TclDateerrflag > 0) --TclDateerrflag; + goto TclDateloop; + } + if ((TclDaten = TclDaterindex[TclDatestate]) && (TclDaten += TclDatechar) >= 0 && + TclDaten <= YYTABLESIZE && TclDatecheck[TclDaten] == TclDatechar) + { + TclDaten = TclDatetable[TclDaten]; + goto TclDatereduce; + } + if (TclDateerrflag) goto TclDateinrecovery; +#ifdef lint + goto TclDatenewerror; #endif - - { - register YYSTYPE *TclDate_pv; /* top of value stack */ - register int *TclDate_ps; /* top of state stack */ - register int TclDate_state; /* current state */ - register int TclDate_n; /* internal state number info */ - goto TclDatestack; /* moved from 6 lines above to here to please C++ */ - - /* - ** get globals into registers. - ** branch to here only if YYBACKUP was called. - */ - TclDate_pv = TclDatepv; - TclDate_ps = TclDateps; - TclDate_state = TclDatestate; - goto TclDate_newstate; - - /* - ** get globals into registers. - ** either we just started, or we just finished a reduction - */ - TclDatestack: - TclDate_pv = TclDatepv; - TclDate_ps = TclDateps; - TclDate_state = TclDatestate; - - /* - ** top of for (;;) loop while no reductions done - */ - TclDate_stack: - /* - ** put a state and value onto the stacks - */ -#if YYDEBUG - /* - ** if debugging, look up token value in list of value vs. - ** name pairs. 0 and negative (-1) are special values. - ** Note: linear search is used since time is not a real - ** consideration while debugging. - */ - if ( TclDatedebug ) - { - register int TclDate_i; - - printf( "State %d, token ", TclDate_state ); - if ( TclDatechar == 0 ) - printf( "end-of-file\n" ); - else if ( TclDatechar < 0 ) - printf( "-none-\n" ); - else - { - for ( TclDate_i = 0; TclDatetoks[TclDate_i].t_val >= 0; - TclDate_i++ ) - { - if ( TclDatetoks[TclDate_i].t_val == TclDatechar ) - break; - } - printf( "%s\n", TclDatetoks[TclDate_i].t_name ); - } - } -#endif /* YYDEBUG */ - if ( ++TclDate_ps >= &TclDates[ TclDatemaxdepth ] ) /* room on stack? */ - { - /* - ** reallocate and recover. Note that pointers - ** have to be reset, or bad things will happen - */ - long TclDateps_index = (TclDate_ps - TclDates); - long TclDatepv_index = (TclDate_pv - TclDatev); - long TclDatepvt_index = (TclDatepvt - TclDatev); - int TclDatenewmax; -#ifdef YYEXPAND - TclDatenewmax = YYEXPAND(TclDatemaxdepth); -#else - TclDatenewmax = 2 * TclDatemaxdepth; /* double table size */ - if (TclDatemaxdepth == YYMAXDEPTH) /* first time growth */ - { - char *newTclDates = (char *)YYNEW(int); - char *newTclDatev = (char *)YYNEW(YYSTYPE); - if (newTclDates != 0 && newTclDatev != 0) - { - TclDates = YYCOPY(newTclDates, TclDates, int); - TclDatev = YYCOPY(newTclDatev, TclDatev, YYSTYPE); - } - else - TclDatenewmax = 0; /* failed */ - } - else /* not first time */ - { - TclDates = YYENLARGE(TclDates, int); - TclDatev = YYENLARGE(TclDatev, YYSTYPE); - if (TclDates == 0 || TclDatev == 0) - TclDatenewmax = 0; /* failed */ - } +TclDatenewerror: + TclDateerror("syntax error"); +#ifdef lint + goto TclDateerrlab; #endif - if (TclDatenewmax <= TclDatemaxdepth) /* tables not expanded */ - { - TclDateerror( "yacc stack overflow" ); - YYABORT; - } - TclDatemaxdepth = TclDatenewmax; - - TclDate_ps = TclDates + TclDateps_index; - TclDate_pv = TclDatev + TclDatepv_index; - TclDatepvt = TclDatev + TclDatepvt_index; - } - *TclDate_ps = TclDate_state; - *++TclDate_pv = TclDateval; - - /* - ** we have a new state - find out what to do - */ - TclDate_newstate: - if ( ( TclDate_n = TclDatepact[ TclDate_state ] ) <= YYFLAG ) - goto TclDatedefault; /* simple state */ + ++TclDatenerrs; +TclDateinrecovery: + if (TclDateerrflag < 3) + { + TclDateerrflag = 3; + for (;;) + { + if ((TclDaten = TclDatesindex[*TclDatessp]) && (TclDaten += YYERRCODE) >= 0 && + TclDaten <= YYTABLESIZE && TclDatecheck[TclDaten] == YYERRCODE) + { #if YYDEBUG - /* - ** if debugging, need to mark whether new token grabbed - */ - TclDatetmp = TclDatechar < 0; + if (TclDatedebug) + printf("%sdebug: state %d, error recovery shifting\ + to state %d\n", YYPREFIX, *TclDatessp, TclDatetable[TclDaten]); #endif - if ( ( TclDatechar < 0 ) && ( ( TclDatechar = YYLEX() ) < 0 ) ) - TclDatechar = 0; /* reached EOF */ -#if YYDEBUG - if ( TclDatedebug && TclDatetmp ) - { - register int TclDate_i; - - printf( "Received token " ); - if ( TclDatechar == 0 ) - printf( "end-of-file\n" ); - else if ( TclDatechar < 0 ) - printf( "-none-\n" ); - else - { - for ( TclDate_i = 0; TclDatetoks[TclDate_i].t_val >= 0; - TclDate_i++ ) - { - if ( TclDatetoks[TclDate_i].t_val == TclDatechar ) - break; - } - printf( "%s\n", TclDatetoks[TclDate_i].t_name ); - } - } -#endif /* YYDEBUG */ - if ( ( ( TclDate_n += TclDatechar ) < 0 ) || ( TclDate_n >= YYLAST ) ) - goto TclDatedefault; - if ( TclDatechk[ TclDate_n = TclDateact[ TclDate_n ] ] == TclDatechar ) /*valid shift*/ - { - TclDatechar = -1; - TclDateval = TclDatelval; - TclDate_state = TclDate_n; - if ( TclDateerrflag > 0 ) - TclDateerrflag--; - goto TclDate_stack; - } - - TclDatedefault: - if ( ( TclDate_n = TclDatedef[ TclDate_state ] ) == -2 ) - { + if (TclDatessp >= TclDatess + TclDatestacksize - 1) + { + goto TclDateoverflow; + } + *++TclDatessp = TclDatestate = TclDatetable[TclDaten]; + *++TclDatevsp = TclDatelval; + goto TclDateloop; + } + else + { #if YYDEBUG - TclDatetmp = TclDatechar < 0; + if (TclDatedebug) + printf("%sdebug: error recovery discarding state %d\n", + YYPREFIX, *TclDatessp); #endif - if ( ( TclDatechar < 0 ) && ( ( TclDatechar = YYLEX() ) < 0 ) ) - TclDatechar = 0; /* reached EOF */ -#if YYDEBUG - if ( TclDatedebug && TclDatetmp ) - { - register int TclDate_i; - - printf( "Received token " ); - if ( TclDatechar == 0 ) - printf( "end-of-file\n" ); - else if ( TclDatechar < 0 ) - printf( "-none-\n" ); - else - { - for ( TclDate_i = 0; - TclDatetoks[TclDate_i].t_val >= 0; - TclDate_i++ ) - { - if ( TclDatetoks[TclDate_i].t_val - == TclDatechar ) - { - break; - } - } - printf( "%s\n", TclDatetoks[TclDate_i].t_name ); - } - } -#endif /* YYDEBUG */ - /* - ** look through exception table - */ - { - register CONST int *TclDatexi = TclDateexca; - - while ( ( *TclDatexi != -1 ) || - ( TclDatexi[1] != TclDate_state ) ) - { - TclDatexi += 2; - } - while ( ( *(TclDatexi += 2) >= 0 ) && - ( *TclDatexi != TclDatechar ) ) - ; - if ( ( TclDate_n = TclDatexi[1] ) < 0 ) - YYACCEPT; - } - } - - /* - ** check for syntax error - */ - if ( TclDate_n == 0 ) /* have an error */ - { - /* no worry about speed here! */ - switch ( TclDateerrflag ) - { - case 0: /* new error */ - TclDateerror( "syntax error" ); - goto skip_init; - /* - ** get globals into registers. - ** we have a user generated syntax type error - */ - TclDate_pv = TclDatepv; - TclDate_ps = TclDateps; - TclDate_state = TclDatestate; - skip_init: - TclDatenerrs++; - /* FALLTHRU */ - case 1: - case 2: /* incompletely recovered error */ - /* try again... */ - TclDateerrflag = 3; - /* - ** find state where "error" is a legal - ** shift action - */ - while ( TclDate_ps >= TclDates ) - { - TclDate_n = TclDatepact[ *TclDate_ps ] + YYERRCODE; - if ( TclDate_n >= 0 && TclDate_n < YYLAST && - TclDatechk[TclDateact[TclDate_n]] == YYERRCODE) { - /* - ** simulate shift of "error" - */ - TclDate_state = TclDateact[ TclDate_n ]; - goto TclDate_stack; - } - /* - ** current state has no shift on - ** "error", pop stack - */ + if (TclDatessp <= TclDatess) goto TclDateabort; + --TclDatessp; + --TclDatevsp; + } + } + } + else + { + if (TclDatechar == 0) goto TclDateabort; #if YYDEBUG -# define _POP_ "Error recovery pops state %d, uncovers state %d\n" - if ( TclDatedebug ) - printf( _POP_, *TclDate_ps, - TclDate_ps[-1] ); -# undef _POP_ + if (TclDatedebug) + { + TclDates = 0; + if (TclDatechar <= YYMAXTOKEN) TclDates = TclDatename[TclDatechar]; + if (!TclDates) TclDates = "illegal-symbol"; + printf("%sdebug: state %d, error recovery discards token %d (%s)\n", + YYPREFIX, TclDatestate, TclDatechar, TclDates); + } #endif - TclDate_ps--; - TclDate_pv--; - } - /* - ** there is no state on stack with "error" as - ** a valid shift. give up. - */ - YYABORT; - case 3: /* no shift yet; eat a token */ -#if YYDEBUG - /* - ** if debugging, look up token in list of - ** pairs. 0 and negative shouldn't occur, - ** but since timing doesn't matter when - ** debugging, it doesn't hurt to leave the - ** tests here. - */ - if ( TclDatedebug ) - { - register int TclDate_i; - - printf( "Error recovery discards " ); - if ( TclDatechar == 0 ) - printf( "token end-of-file\n" ); - else if ( TclDatechar < 0 ) - printf( "token -none-\n" ); - else - { - for ( TclDate_i = 0; - TclDatetoks[TclDate_i].t_val >= 0; - TclDate_i++ ) - { - if ( TclDatetoks[TclDate_i].t_val - == TclDatechar ) - { - break; - } - } - printf( "token %s\n", - TclDatetoks[TclDate_i].t_name ); - } - } -#endif /* YYDEBUG */ - if ( TclDatechar == 0 ) /* reached EOF. quit */ - YYABORT; - TclDatechar = -1; - goto TclDate_newstate; - } - }/* end if ( TclDate_n == 0 ) */ - /* - ** reduction by production TclDate_n - ** put stack tops, etc. so things right after switch - */ + TclDatechar = (-1); + goto TclDateloop; + } +TclDatereduce: #if YYDEBUG - /* - ** if debugging, print the string that is the user's - ** specification of the reduction which is just about - ** to be done. - */ - if ( TclDatedebug ) - printf( "Reduce by (%d) \"%s\"\n", - TclDate_n, TclDatereds[ TclDate_n ] ); + if (TclDatedebug) + printf("%sdebug: state %d, reducing by rule %d (%s)\n", + YYPREFIX, TclDatestate, TclDaten, TclDaterule[TclDaten]); #endif - TclDatetmp = TclDate_n; /* value to switch over */ - TclDatepvt = TclDate_pv; /* $vars top of value stack */ - /* - ** Look in goto table for next state - ** Sorry about using TclDate_state here as temporary - ** register variable, but why not, if it works... - ** If TclDater2[ TclDate_n ] doesn't have the low order bit - ** set, then there is no action to be done for - ** this reduction. So, no saving & unsaving of - ** registers done. The only difference between the - ** code just after the if and the body of the if is - ** the goto TclDate_stack in the body. This way the test - ** can be made before the choice of what to do is needed. - */ - { - /* length of production doubled with extra bit */ - register int TclDate_len = TclDater2[ TclDate_n ]; - - if ( !( TclDate_len & 01 ) ) - { - TclDate_len >>= 1; - TclDateval = ( TclDate_pv -= TclDate_len )[1]; /* $$ = $1 */ - TclDate_state = TclDatepgo[ TclDate_n = TclDater1[ TclDate_n ] ] + - *( TclDate_ps -= TclDate_len ) + 1; - if ( TclDate_state >= YYLAST || - TclDatechk[ TclDate_state = - TclDateact[ TclDate_state ] ] != -TclDate_n ) - { - TclDate_state = TclDateact[ TclDatepgo[ TclDate_n ] ]; - } - goto TclDate_stack; - } - TclDate_len >>= 1; - TclDateval = ( TclDate_pv -= TclDate_len )[1]; /* $$ = $1 */ - TclDate_state = TclDatepgo[ TclDate_n = TclDater1[ TclDate_n ] ] + - *( TclDate_ps -= TclDate_len ) + 1; - if ( TclDate_state >= YYLAST || - TclDatechk[ TclDate_state = TclDateact[ TclDate_state ] ] != -TclDate_n ) - { - TclDate_state = TclDateact[ TclDatepgo[ TclDate_n ] ]; - } - } - /* save until reenter driver code */ - TclDatestate = TclDate_state; - TclDateps = TclDate_ps; - TclDatepv = TclDate_pv; - } - /* - ** code supplied by user is placed in this switch - */ - switch( TclDatetmp ) - { - -case 3:{ + TclDatem = TclDatelen[TclDaten]; + TclDateval = TclDatevsp[1-TclDatem]; + switch (TclDaten) + { +case 3: +{ TclDateHaveTime++; - } break; -case 4:{ + } +break; +case 4: +{ TclDateHaveZone++; - } break; -case 5:{ + } +break; +case 5: +{ TclDateHaveDate++; - } break; -case 6:{ + } +break; +case 6: +{ TclDateHaveDay++; - } break; -case 7:{ + } +break; +case 7: +{ TclDateHaveRel++; - } break; -case 9:{ - TclDateHour = TclDatepvt[-1].Number; + } +break; +case 8: +{ + TclDateHaveTime++; + TclDateHaveDate++; + } +break; +case 10: +{ + TclDateHour = TclDatevsp[-1].Number; TclDateMinutes = 0; TclDateSeconds = 0; - TclDateMeridian = TclDatepvt[-0].Meridian; - } break; -case 10:{ - TclDateHour = TclDatepvt[-3].Number; - TclDateMinutes = TclDatepvt[-1].Number; + TclDateMeridian = TclDatevsp[0].Meridian; + } +break; +case 11: +{ + TclDateHour = TclDatevsp[-3].Number; + TclDateMinutes = TclDatevsp[-1].Number; TclDateSeconds = 0; - TclDateMeridian = TclDatepvt[-0].Meridian; - } break; -case 11:{ - TclDateHour = TclDatepvt[-3].Number; - TclDateMinutes = TclDatepvt[-1].Number; + TclDateMeridian = TclDatevsp[0].Meridian; + } +break; +case 12: +{ + TclDateHour = TclDatevsp[-4].Number; + TclDateMinutes = TclDatevsp[-2].Number; TclDateMeridian = MER24; TclDateDSTmode = DSToff; - TclDateTimezone = - (TclDatepvt[-0].Number % 100 + (TclDatepvt[-0].Number / 100) * 60); - } break; -case 12:{ - TclDateHour = TclDatepvt[-5].Number; - TclDateMinutes = TclDatepvt[-3].Number; - TclDateSeconds = TclDatepvt[-1].Number; - TclDateMeridian = TclDatepvt[-0].Meridian; - } break; -case 13:{ - TclDateHour = TclDatepvt[-5].Number; - TclDateMinutes = TclDatepvt[-3].Number; - TclDateSeconds = TclDatepvt[-1].Number; + TclDateTimezone = (TclDatevsp[0].Number % 100 + (TclDatevsp[0].Number / 100) * 60); + } +break; +case 13: +{ + TclDateHour = TclDatevsp[-5].Number; + TclDateMinutes = TclDatevsp[-3].Number; + TclDateSeconds = TclDatevsp[-1].Number; + TclDateMeridian = TclDatevsp[0].Meridian; + } +break; +case 14: +{ + TclDateHour = TclDatevsp[-6].Number; + TclDateMinutes = TclDatevsp[-4].Number; + TclDateSeconds = TclDatevsp[-2].Number; TclDateMeridian = MER24; TclDateDSTmode = DSToff; - TclDateTimezone = - (TclDatepvt[-0].Number % 100 + (TclDatepvt[-0].Number / 100) * 60); - } break; -case 14:{ - TclDateTimezone = TclDatepvt[-1].Number; + TclDateTimezone = (TclDatevsp[0].Number % 100 + (TclDatevsp[0].Number / 100) * 60); + } +break; +case 15: +{ + TclDateTimezone = TclDatevsp[-1].Number; TclDateDSTmode = DSTon; - } break; -case 15:{ - TclDateTimezone = TclDatepvt[-0].Number; + } +break; +case 16: +{ + TclDateTimezone = TclDatevsp[0].Number; TclDateDSTmode = DSToff; - } break; -case 16:{ - TclDateTimezone = TclDatepvt[-0].Number; + } +break; +case 17: +{ + TclDateTimezone = TclDatevsp[0].Number; TclDateDSTmode = DSTon; - } break; -case 17:{ + } +break; +case 18: +{ TclDateDayOrdinal = 1; - TclDateDayNumber = TclDatepvt[-0].Number; - } break; -case 18:{ + TclDateDayNumber = TclDatevsp[0].Number; + } +break; +case 19: +{ TclDateDayOrdinal = 1; - TclDateDayNumber = TclDatepvt[-1].Number; - } break; -case 19:{ - TclDateDayOrdinal = TclDatepvt[-1].Number; - TclDateDayNumber = TclDatepvt[-0].Number; - } break; -case 20:{ - TclDateMonth = TclDatepvt[-2].Number; - TclDateDay = TclDatepvt[-0].Number; - } break; -case 21:{ - TclDateMonth = TclDatepvt[-4].Number; - TclDateDay = TclDatepvt[-2].Number; - TclDateYear = TclDatepvt[-0].Number; - } break; -case 22:{ - TclDateMonth = TclDatepvt[-1].Number; - TclDateDay = TclDatepvt[-0].Number; - } break; -case 23:{ - TclDateMonth = TclDatepvt[-3].Number; - TclDateDay = TclDatepvt[-2].Number; - TclDateYear = TclDatepvt[-0].Number; - } break; -case 24:{ - TclDateMonth = TclDatepvt[-0].Number; - TclDateDay = TclDatepvt[-1].Number; - } break; -case 25:{ + TclDateDayNumber = TclDatevsp[-1].Number; + } +break; +case 20: +{ + TclDateDayOrdinal = TclDatevsp[-1].Number; + TclDateDayNumber = TclDatevsp[0].Number; + } +break; +case 21: +{ + TclDateMonth = TclDatevsp[-2].Number; + TclDateDay = TclDatevsp[0].Number; + } +break; +case 22: +{ + TclDateMonth = TclDatevsp[-4].Number; + TclDateDay = TclDatevsp[-2].Number; + TclDateYear = TclDatevsp[0].Number; + } +break; +case 23: +{ + TclDateYear = TclDatevsp[0].Number / 10000; + TclDateMonth = (TclDatevsp[0].Number % 10000)/100; + TclDateDay = TclDatevsp[0].Number % 100; + } +break; +case 24: +{ + TclDateDay = TclDatevsp[-4].Number; + TclDateMonth = TclDatevsp[-2].Number; + TclDateYear = TclDatevsp[0].Number; + } +break; +case 25: +{ + TclDateMonth = TclDatevsp[-2].Number; + TclDateDay = TclDatevsp[0].Number; + TclDateYear = TclDatevsp[-4].Number; + } +break; +case 26: +{ + TclDateMonth = TclDatevsp[-1].Number; + TclDateDay = TclDatevsp[0].Number; + } +break; +case 27: +{ + TclDateMonth = TclDatevsp[-3].Number; + TclDateDay = TclDatevsp[-2].Number; + TclDateYear = TclDatevsp[0].Number; + } +break; +case 28: +{ + TclDateMonth = TclDatevsp[0].Number; + TclDateDay = TclDatevsp[-1].Number; + } +break; +case 29: +{ TclDateMonth = 1; TclDateDay = 1; TclDateYear = EPOCH; - } break; -case 26:{ - TclDateMonth = TclDatepvt[-1].Number; - TclDateDay = TclDatepvt[-2].Number; - TclDateYear = TclDatepvt[-0].Number; - } break; -case 27:{ + } +break; +case 30: +{ + TclDateMonth = TclDatevsp[-1].Number; + TclDateDay = TclDatevsp[-2].Number; + TclDateYear = TclDatevsp[0].Number; + } +break; +case 31: +{ + if (TclDatevsp[-1].Number != HOUR(- 7)) goto TclDateabort; + TclDateYear = TclDatevsp[-2].Number / 10000; + TclDateMonth = (TclDatevsp[-2].Number % 10000)/100; + TclDateDay = TclDatevsp[-2].Number % 100; + TclDateHour = TclDatevsp[0].Number / 10000; + TclDateMinutes = (TclDatevsp[0].Number % 10000)/100; + TclDateSeconds = TclDatevsp[0].Number % 100; + } +break; +case 32: +{ + if (TclDatevsp[-5].Number != HOUR(- 7)) goto TclDateabort; + TclDateYear = TclDatevsp[-6].Number / 10000; + TclDateMonth = (TclDatevsp[-6].Number % 10000)/100; + TclDateDay = TclDatevsp[-6].Number % 100; + TclDateHour = TclDatevsp[-4].Number; + TclDateMinutes = TclDatevsp[-2].Number; + TclDateSeconds = TclDatevsp[0].Number; + } +break; +case 33: +{ + TclDateYear = TclDatevsp[-1].Number / 10000; + TclDateMonth = (TclDatevsp[-1].Number % 10000)/100; + TclDateDay = TclDatevsp[-1].Number % 100; + TclDateHour = TclDatevsp[0].Number / 10000; + TclDateMinutes = (TclDatevsp[0].Number % 10000)/100; + TclDateSeconds = TclDatevsp[0].Number % 100; + } +break; +case 34: +{ TclDateRelSeconds = -TclDateRelSeconds; TclDateRelMonth = -TclDateRelMonth; - } break; -case 29:{ - TclDateRelSeconds += TclDatepvt[-1].Number * TclDatepvt[-0].Number * 60L; - } break; -case 30:{ - TclDateRelSeconds += TclDatepvt[-1].Number * TclDatepvt[-0].Number * 60L; - } break; -case 31:{ - TclDateRelSeconds += TclDatepvt[-0].Number * 60L; - } break; -case 32:{ - TclDateRelSeconds += TclDatepvt[-1].Number; - } break; -case 33:{ - TclDateRelSeconds += TclDatepvt[-1].Number; - } break; -case 34:{ + } +break; +case 36: +{ + TclDateRelSeconds += TclDatevsp[-1].Number * TclDatevsp[0].Number * 60L; + } +break; +case 37: +{ + TclDateRelSeconds -= TclDatevsp[-1].Number * TclDatevsp[0].Number * 60L; + } +break; +case 38: +{ + TclDateRelSeconds += TclDatevsp[0].Number * 60L; + } +break; +case 39: +{ + TclDateRelSeconds -= TclDatevsp[-1].Number; + } +break; +case 40: +{ + TclDateRelSeconds += TclDatevsp[-1].Number; + } +break; +case 41: +{ TclDateRelSeconds++; - } break; -case 35:{ - TclDateRelMonth += TclDatepvt[-1].Number * TclDatepvt[-0].Number; - } break; -case 36:{ - TclDateRelMonth += TclDatepvt[-1].Number * TclDatepvt[-0].Number; - } break; -case 37:{ - TclDateRelMonth += TclDatepvt[-0].Number; - } break; -case 38:{ + } +break; +case 42: +{ + TclDateRelMonth -= TclDatevsp[-1].Number * TclDatevsp[0].Number; + } +break; +case 43: +{ + TclDateRelMonth += TclDatevsp[-1].Number * TclDatevsp[0].Number; + } +break; +case 44: +{ + TclDateRelMonth += TclDatevsp[0].Number; + } +break; +case 45: +{ if (TclDateHaveTime && TclDateHaveDate && !TclDateHaveRel) { - TclDateYear = TclDatepvt[-0].Number; + TclDateYear = TclDatevsp[0].Number; } else { TclDateHaveTime++; - if (TclDatepvt[-0].Number < 100) { - TclDateHour = 0; - TclDateMinutes = TclDatepvt[-0].Number; + if (TclDatevsp[0].Number < 100) { + TclDateHour = TclDatevsp[0].Number; + TclDateMinutes = 0; } else { - TclDateHour = TclDatepvt[-0].Number / 100; - TclDateMinutes = TclDatepvt[-0].Number % 100; + TclDateHour = TclDatevsp[0].Number / 100; + TclDateMinutes = TclDatevsp[0].Number % 100; } TclDateSeconds = 0; TclDateMeridian = MER24; } - } break; -case 39:{ + } +break; +case 46: +{ TclDateval.Meridian = MER24; - } break; -case 40:{ - TclDateval.Meridian = TclDatepvt[-0].Meridian; - } break; - } - goto TclDatestack; /* reset registers in driver code */ + } +break; +case 47: +{ + TclDateval.Meridian = TclDatevsp[0].Meridian; + } +break; + } + TclDatessp -= TclDatem; + TclDatestate = *TclDatessp; + TclDatevsp -= TclDatem; + TclDatem = TclDatelhs[TclDaten]; + if (TclDatestate == 0 && TclDatem == 0) + { +#if YYDEBUG + if (TclDatedebug) + printf("%sdebug: after reduction, shifting from state 0 to\ + state %d\n", YYPREFIX, YYFINAL); +#endif + TclDatestate = YYFINAL; + *++TclDatessp = YYFINAL; + *++TclDatevsp = TclDateval; + if (TclDatechar < 0) + { + if ((TclDatechar = TclDatelex()) < 0) TclDatechar = 0; +#if YYDEBUG + if (TclDatedebug) + { + TclDates = 0; + if (TclDatechar <= YYMAXTOKEN) TclDates = TclDatename[TclDatechar]; + if (!TclDates) TclDates = "illegal-symbol"; + printf("%sdebug: state %d, reading %d (%s)\n", + YYPREFIX, YYFINAL, TclDatechar, TclDates); + } +#endif + } + if (TclDatechar == 0) goto TclDateaccept; + goto TclDateloop; + } + if ((TclDaten = TclDategindex[TclDatem]) && (TclDaten += TclDatestate) >= 0 && + TclDaten <= YYTABLESIZE && TclDatecheck[TclDaten] == TclDatestate) + TclDatestate = TclDatetable[TclDaten]; + else + TclDatestate = TclDatedgoto[TclDatem]; +#if YYDEBUG + if (TclDatedebug) + printf("%sdebug: after reduction, shifting from state %d \ +to state %d\n", YYPREFIX, *TclDatessp, TclDatestate); +#endif + if (TclDatessp >= TclDatess + TclDatestacksize - 1) + { + goto TclDateoverflow; + } + *++TclDatessp = TclDatestate; + *++TclDatevsp = TclDateval; + goto TclDateloop; +TclDateoverflow: + TclDateerror("yacc stack overflow"); +TclDateabort: + return (1); +TclDateaccept: + return (0); } - |