diff options
Diffstat (limited to 'generic/tclDisassemble.c')
| -rw-r--r-- | generic/tclDisassemble.c | 1403 |
1 files changed, 1403 insertions, 0 deletions
diff --git a/generic/tclDisassemble.c b/generic/tclDisassemble.c new file mode 100644 index 0000000..b3753c31 --- /dev/null +++ b/generic/tclDisassemble.c @@ -0,0 +1,1403 @@ +/* + * tclDisassemble.c -- + * + * This file contains procedures that disassemble bytecode into either + * human-readable or Tcl-processable forms. + * + * Copyright (c) 1996-1998 Sun Microsystems, Inc. + * Copyright (c) 2001 by Kevin B. Kenny. All rights reserved. + * Copyright (c) 2013 Donal K. Fellows. + * + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. + */ + +#include "tclInt.h" +#include "tclCompile.h" +#include "tclOOInt.h" +#include <assert.h> + +/* + * Prototypes for procedures defined later in this file: + */ + +static Tcl_Obj * DisassembleByteCodeAsDicts(Tcl_Obj *objPtr); +static int FormatInstruction(ByteCode *codePtr, + const unsigned char *pc, Tcl_Obj *bufferObj); +static void PrintSourceToObj(Tcl_Obj *appendObj, + const char *stringPtr, int maxChars); +static void UpdateStringOfInstName(Tcl_Obj *objPtr); + +/* + * The structure below defines an instruction name Tcl object to allow + * reporting of inner contexts in errorstack without string allocation. + */ + +static const Tcl_ObjType tclInstNameType = { + "instname", /* name */ + NULL, /* freeIntRepProc */ + NULL, /* dupIntRepProc */ + UpdateStringOfInstName, /* updateStringProc */ + NULL, /* setFromAnyProc */ +}; + +/* + * How to get the bytecode out of a Tcl_Obj. + */ + +#define BYTECODE(objPtr) \ + ((ByteCode *) (objPtr)->internalRep.twoPtrValue.ptr1) + +#ifdef TCL_COMPILE_DEBUG +/* + *---------------------------------------------------------------------- + * + * TclPrintByteCodeObj -- + * + * This procedure prints ("disassembles") the instructions of a bytecode + * object to stdout. + * + * Results: + * None. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +void +TclPrintByteCodeObj( + Tcl_Interp *interp, /* Used only for Tcl_GetStringFromObj. */ + Tcl_Obj *objPtr) /* The bytecode object to disassemble. */ +{ + Tcl_Obj *bufPtr = TclDisassembleByteCodeObj(objPtr); + + fprintf(stdout, "\n%s", TclGetString(bufPtr)); + Tcl_DecrRefCount(bufPtr); +} + +/* + *---------------------------------------------------------------------- + * + * TclPrintInstruction -- + * + * This procedure prints ("disassembles") one instruction from a bytecode + * object to stdout. + * + * Results: + * Returns the length in bytes of the current instruiction. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +int +TclPrintInstruction( + ByteCode *codePtr, /* Bytecode containing the instruction. */ + const unsigned char *pc) /* Points to first byte of instruction. */ +{ + Tcl_Obj *bufferObj; + int numBytes; + + TclNewObj(bufferObj); + numBytes = FormatInstruction(codePtr, pc, bufferObj); + fprintf(stdout, "%s", TclGetString(bufferObj)); + Tcl_DecrRefCount(bufferObj); + return numBytes; +} + +/* + *---------------------------------------------------------------------- + * + * TclPrintObject -- + * + * This procedure prints up to a specified number of characters from the + * argument Tcl object's string representation to a specified file. + * + * Results: + * None. + * + * Side effects: + * Outputs characters to the specified file. + * + *---------------------------------------------------------------------- + */ + +void +TclPrintObject( + FILE *outFile, /* The file to print the source to. */ + Tcl_Obj *objPtr, /* Points to the Tcl object whose string + * representation should be printed. */ + int maxChars) /* Maximum number of chars to print. */ +{ + char *bytes; + int length; + + bytes = Tcl_GetStringFromObj(objPtr, &length); + TclPrintSource(outFile, bytes, TclMin(length, maxChars)); +} + +/* + *---------------------------------------------------------------------- + * + * TclPrintSource -- + * + * This procedure prints up to a specified number of characters from the + * argument string to a specified file. It tries to produce legible + * output by adding backslashes as necessary. + * + * Results: + * None. + * + * Side effects: + * Outputs characters to the specified file. + * + *---------------------------------------------------------------------- + */ + +void +TclPrintSource( + FILE *outFile, /* The file to print the source to. */ + const char *stringPtr, /* The string to print. */ + int maxChars) /* Maximum number of chars to print. */ +{ + Tcl_Obj *bufferObj; + + TclNewObj(bufferObj); + PrintSourceToObj(bufferObj, stringPtr, maxChars); + fprintf(outFile, "%s", TclGetString(bufferObj)); + Tcl_DecrRefCount(bufferObj); +} +#endif /* TCL_COMPILE_DEBUG */ + +/* + *---------------------------------------------------------------------- + * + * TclDisassembleByteCodeObj -- + * + * Given an object which is of bytecode type, return a disassembled + * version of the bytecode (in a new refcount 0 object). No guarantees + * are made about the details of the contents of the result. + * + *---------------------------------------------------------------------- + */ + +Tcl_Obj * +TclDisassembleByteCodeObj( + Tcl_Obj *objPtr) /* The bytecode object to disassemble. */ +{ + ByteCode *codePtr = BYTECODE(objPtr); + unsigned char *codeStart, *codeLimit, *pc; + unsigned char *codeDeltaNext, *codeLengthNext; + unsigned char *srcDeltaNext, *srcLengthNext; + int codeOffset, codeLen, srcOffset, srcLen, numCmds, delta, i; + Interp *iPtr = (Interp *) *codePtr->interpHandle; + Tcl_Obj *bufferObj; + char ptrBuf1[20], ptrBuf2[20]; + + TclNewObj(bufferObj); + if (codePtr->refCount <= 0) { + return bufferObj; /* Already freed. */ + } + + codeStart = codePtr->codeStart; + codeLimit = codeStart + codePtr->numCodeBytes; + numCmds = codePtr->numCommands; + + /* + * Print header lines describing the ByteCode. + */ + + sprintf(ptrBuf1, "%p", codePtr); + sprintf(ptrBuf2, "%p", iPtr); + Tcl_AppendPrintfToObj(bufferObj, + "ByteCode 0x%s, refCt %u, epoch %u, interp 0x%s (epoch %u)\n", + ptrBuf1, codePtr->refCount, codePtr->compileEpoch, ptrBuf2, + iPtr->compileEpoch); + Tcl_AppendToObj(bufferObj, " Source ", -1); + PrintSourceToObj(bufferObj, codePtr->source, + TclMin(codePtr->numSrcBytes, 55)); + Tcl_AppendPrintfToObj(bufferObj, + "\n Cmds %d, src %d, inst %d, litObjs %u, aux %d, stkDepth %u, code/src %.2f\n", + numCmds, codePtr->numSrcBytes, codePtr->numCodeBytes, + codePtr->numLitObjects, codePtr->numAuxDataItems, + codePtr->maxStackDepth, +#ifdef TCL_COMPILE_STATS + codePtr->numSrcBytes? + codePtr->structureSize/(float)codePtr->numSrcBytes : +#endif + 0.0); + +#ifdef TCL_COMPILE_STATS + Tcl_AppendPrintfToObj(bufferObj, + " Code %lu = header %lu+inst %d+litObj %lu+exc %lu+aux %lu+cmdMap %d\n", + (unsigned long) codePtr->structureSize, + (unsigned long) (sizeof(ByteCode) - sizeof(size_t) - sizeof(Tcl_Time)), + codePtr->numCodeBytes, + (unsigned long) (codePtr->numLitObjects * sizeof(Tcl_Obj *)), + (unsigned long) (codePtr->numExceptRanges*sizeof(ExceptionRange)), + (unsigned long) (codePtr->numAuxDataItems * sizeof(AuxData)), + codePtr->numCmdLocBytes); +#endif /* TCL_COMPILE_STATS */ + + /* + * If the ByteCode is the compiled body of a Tcl procedure, print + * information about that procedure. Note that we don't know the + * procedure's name since ByteCode's can be shared among procedures. + */ + + if (codePtr->procPtr != NULL) { + Proc *procPtr = codePtr->procPtr; + int numCompiledLocals = procPtr->numCompiledLocals; + + sprintf(ptrBuf1, "%p", procPtr); + Tcl_AppendPrintfToObj(bufferObj, + " Proc 0x%s, refCt %d, args %d, compiled locals %d\n", + ptrBuf1, procPtr->refCount, procPtr->numArgs, + numCompiledLocals); + if (numCompiledLocals > 0) { + CompiledLocal *localPtr = procPtr->firstLocalPtr; + + for (i = 0; i < numCompiledLocals; i++) { + Tcl_AppendPrintfToObj(bufferObj, + " slot %d%s%s%s%s%s%s", i, + (localPtr->flags & (VAR_ARRAY|VAR_LINK)) ? "" : ", scalar", + (localPtr->flags & VAR_ARRAY) ? ", array" : "", + (localPtr->flags & VAR_LINK) ? ", link" : "", + (localPtr->flags & VAR_ARGUMENT) ? ", arg" : "", + (localPtr->flags & VAR_TEMPORARY) ? ", temp" : "", + (localPtr->flags & VAR_RESOLVED) ? ", resolved" : ""); + if (TclIsVarTemporary(localPtr)) { + Tcl_AppendToObj(bufferObj, "\n", -1); + } else { + Tcl_AppendPrintfToObj(bufferObj, ", \"%s\"\n", + localPtr->name); + } + localPtr = localPtr->nextPtr; + } + } + } + + /* + * Print the ExceptionRange array. + */ + + if (codePtr->numExceptRanges > 0) { + Tcl_AppendPrintfToObj(bufferObj, " Exception ranges %d, depth %d:\n", + codePtr->numExceptRanges, codePtr->maxExceptDepth); + for (i = 0; i < codePtr->numExceptRanges; i++) { + ExceptionRange *rangePtr = &codePtr->exceptArrayPtr[i]; + + Tcl_AppendPrintfToObj(bufferObj, + " %d: level %d, %s, pc %d-%d, ", + i, rangePtr->nestingLevel, + (rangePtr->type==LOOP_EXCEPTION_RANGE ? "loop" : "catch"), + rangePtr->codeOffset, + (rangePtr->codeOffset + rangePtr->numCodeBytes - 1)); + switch (rangePtr->type) { + case LOOP_EXCEPTION_RANGE: + Tcl_AppendPrintfToObj(bufferObj, "continue %d, break %d\n", + rangePtr->continueOffset, rangePtr->breakOffset); + break; + case CATCH_EXCEPTION_RANGE: + Tcl_AppendPrintfToObj(bufferObj, "catch %d\n", + rangePtr->catchOffset); + break; + default: + Tcl_Panic("TclDisassembleByteCodeObj: bad ExceptionRange type %d", + rangePtr->type); + } + } + } + + /* + * If there were no commands (e.g., an expression or an empty string was + * compiled), just print all instructions and return. + */ + + if (numCmds == 0) { + pc = codeStart; + while (pc < codeLimit) { + Tcl_AppendToObj(bufferObj, " ", -1); + pc += FormatInstruction(codePtr, pc, bufferObj); + } + return bufferObj; + } + + /* + * Print table showing the code offset, source offset, and source length + * for each command. These are encoded as a sequence of bytes. + */ + + Tcl_AppendPrintfToObj(bufferObj, " Commands %d:", numCmds); + codeDeltaNext = codePtr->codeDeltaStart; + codeLengthNext = codePtr->codeLengthStart; + srcDeltaNext = codePtr->srcDeltaStart; + srcLengthNext = codePtr->srcLengthStart; + codeOffset = srcOffset = 0; + for (i = 0; i < numCmds; i++) { + if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) { + codeDeltaNext++; + delta = TclGetInt4AtPtr(codeDeltaNext); + codeDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(codeDeltaNext); + codeDeltaNext++; + } + codeOffset += delta; + + if ((unsigned) *codeLengthNext == (unsigned) 0xFF) { + codeLengthNext++; + codeLen = TclGetInt4AtPtr(codeLengthNext); + codeLengthNext += 4; + } else { + codeLen = TclGetInt1AtPtr(codeLengthNext); + codeLengthNext++; + } + + if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) { + srcDeltaNext++; + delta = TclGetInt4AtPtr(srcDeltaNext); + srcDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(srcDeltaNext); + srcDeltaNext++; + } + srcOffset += delta; + + if ((unsigned) *srcLengthNext == (unsigned) 0xFF) { + srcLengthNext++; + srcLen = TclGetInt4AtPtr(srcLengthNext); + srcLengthNext += 4; + } else { + srcLen = TclGetInt1AtPtr(srcLengthNext); + srcLengthNext++; + } + + Tcl_AppendPrintfToObj(bufferObj, "%s%4d: pc %d-%d, src %d-%d", + ((i % 2)? " " : "\n "), + (i+1), codeOffset, (codeOffset + codeLen - 1), + srcOffset, (srcOffset + srcLen - 1)); + } + if (numCmds > 0) { + Tcl_AppendToObj(bufferObj, "\n", -1); + } + + /* + * Print each instruction. If the instruction corresponds to the start of + * a command, print the command's source. Note that we don't need the code + * length here. + */ + + codeDeltaNext = codePtr->codeDeltaStart; + srcDeltaNext = codePtr->srcDeltaStart; + srcLengthNext = codePtr->srcLengthStart; + codeOffset = srcOffset = 0; + pc = codeStart; + for (i = 0; i < numCmds; i++) { + if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) { + codeDeltaNext++; + delta = TclGetInt4AtPtr(codeDeltaNext); + codeDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(codeDeltaNext); + codeDeltaNext++; + } + codeOffset += delta; + + if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) { + srcDeltaNext++; + delta = TclGetInt4AtPtr(srcDeltaNext); + srcDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(srcDeltaNext); + srcDeltaNext++; + } + srcOffset += delta; + + if ((unsigned) *srcLengthNext == (unsigned) 0xFF) { + srcLengthNext++; + srcLen = TclGetInt4AtPtr(srcLengthNext); + srcLengthNext += 4; + } else { + srcLen = TclGetInt1AtPtr(srcLengthNext); + srcLengthNext++; + } + + /* + * Print instructions before command i. + */ + + while ((pc-codeStart) < codeOffset) { + Tcl_AppendToObj(bufferObj, " ", -1); + pc += FormatInstruction(codePtr, pc, bufferObj); + } + + Tcl_AppendPrintfToObj(bufferObj, " Command %d: ", i+1); + PrintSourceToObj(bufferObj, (codePtr->source + srcOffset), + TclMin(srcLen, 55)); + Tcl_AppendToObj(bufferObj, "\n", -1); + } + if (pc < codeLimit) { + /* + * Print instructions after the last command. + */ + + while (pc < codeLimit) { + Tcl_AppendToObj(bufferObj, " ", -1); + pc += FormatInstruction(codePtr, pc, bufferObj); + } + } + return bufferObj; +} + +/* + *---------------------------------------------------------------------- + * + * FormatInstruction -- + * + * Appends a representation of a bytecode instruction to a Tcl_Obj. + * + *---------------------------------------------------------------------- + */ + +static int +FormatInstruction( + ByteCode *codePtr, /* Bytecode containing the instruction. */ + const unsigned char *pc, /* Points to first byte of instruction. */ + Tcl_Obj *bufferObj) /* Object to append instruction info to. */ +{ + Proc *procPtr = codePtr->procPtr; + unsigned char opCode = *pc; + register const InstructionDesc *instDesc = &tclInstructionTable[opCode]; + unsigned char *codeStart = codePtr->codeStart; + unsigned pcOffset = pc - codeStart; + int opnd = 0, i, j, numBytes = 1; + int localCt = procPtr ? procPtr->numCompiledLocals : 0; + CompiledLocal *localPtr = procPtr ? procPtr->firstLocalPtr : NULL; + char suffixBuffer[128]; /* Additional info to print after main opcode + * and immediates. */ + char *suffixSrc = NULL; + Tcl_Obj *suffixObj = NULL; + AuxData *auxPtr = NULL; + + suffixBuffer[0] = '\0'; + Tcl_AppendPrintfToObj(bufferObj, "(%u) %s ", pcOffset, instDesc->name); + for (i = 0; i < instDesc->numOperands; i++) { + switch (instDesc->opTypes[i]) { + case OPERAND_INT1: + opnd = TclGetInt1AtPtr(pc+numBytes); numBytes++; + Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd); + break; + case OPERAND_INT4: + opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4; + Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd); + break; + case OPERAND_UINT1: + opnd = TclGetUInt1AtPtr(pc+numBytes); numBytes++; + Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); + break; + case OPERAND_UINT4: + opnd = TclGetUInt4AtPtr(pc+numBytes); numBytes += 4; + if (opCode == INST_START_CMD) { + sprintf(suffixBuffer+strlen(suffixBuffer), + ", %u cmds start here", opnd); + } + Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); + break; + case OPERAND_OFFSET1: + opnd = TclGetInt1AtPtr(pc+numBytes); numBytes++; + sprintf(suffixBuffer, "pc %u", pcOffset+opnd); + Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd); + break; + case OPERAND_OFFSET4: + opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4; + if (opCode == INST_START_CMD) { + sprintf(suffixBuffer, "next cmd at pc %u", pcOffset+opnd); + } else { + sprintf(suffixBuffer, "pc %u", pcOffset+opnd); + } + Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd); + break; + case OPERAND_LIT1: + opnd = TclGetUInt1AtPtr(pc+numBytes); numBytes++; + suffixObj = codePtr->objArrayPtr[opnd]; + Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); + break; + case OPERAND_LIT4: + opnd = TclGetUInt4AtPtr(pc+numBytes); numBytes += 4; + suffixObj = codePtr->objArrayPtr[opnd]; + Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); + break; + case OPERAND_AUX4: + opnd = TclGetUInt4AtPtr(pc+numBytes); numBytes += 4; + Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); + auxPtr = &codePtr->auxDataArrayPtr[opnd]; + break; + case OPERAND_IDX4: + opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4; + if (opnd >= -1) { + Tcl_AppendPrintfToObj(bufferObj, "%d ", opnd); + } else if (opnd == -2) { + Tcl_AppendPrintfToObj(bufferObj, "end "); + } else { + Tcl_AppendPrintfToObj(bufferObj, "end-%d ", -2-opnd); + } + break; + case OPERAND_LVT1: + opnd = TclGetUInt1AtPtr(pc+numBytes); + numBytes++; + goto printLVTindex; + case OPERAND_LVT4: + opnd = TclGetUInt4AtPtr(pc+numBytes); + numBytes += 4; + printLVTindex: + if (localPtr != NULL) { + if (opnd >= localCt) { + Tcl_Panic("FormatInstruction: bad local var index %u (%u locals)", + (unsigned) opnd, localCt); + } + for (j = 0; j < opnd; j++) { + localPtr = localPtr->nextPtr; + } + if (TclIsVarTemporary(localPtr)) { + sprintf(suffixBuffer, "temp var %u", (unsigned) opnd); + } else { + sprintf(suffixBuffer, "var "); + suffixSrc = localPtr->name; + } + } + Tcl_AppendPrintfToObj(bufferObj, "%%v%u ", (unsigned) opnd); + break; + case OPERAND_SCLS1: + opnd = TclGetUInt1AtPtr(pc+numBytes); numBytes++; + Tcl_AppendPrintfToObj(bufferObj, "%s ", + tclStringClassTable[opnd].name); + break; + case OPERAND_NONE: + default: + break; + } + } + if (suffixObj) { + const char *bytes; + int length; + + Tcl_AppendToObj(bufferObj, "\t# ", -1); + bytes = Tcl_GetStringFromObj(codePtr->objArrayPtr[opnd], &length); + PrintSourceToObj(bufferObj, bytes, TclMin(length, 40)); + } else if (suffixBuffer[0]) { + Tcl_AppendPrintfToObj(bufferObj, "\t# %s", suffixBuffer); + if (suffixSrc) { + PrintSourceToObj(bufferObj, suffixSrc, 40); + } + } + Tcl_AppendToObj(bufferObj, "\n", -1); + if (auxPtr && auxPtr->type->printProc) { + Tcl_AppendToObj(bufferObj, "\t\t[", -1); + auxPtr->type->printProc(auxPtr->clientData, bufferObj, codePtr, + pcOffset); + Tcl_AppendToObj(bufferObj, "]\n", -1); + } + return numBytes; +} + +/* + *---------------------------------------------------------------------- + * + * TclGetInnerContext -- + * + * If possible, returns a list capturing the inner context. Otherwise + * return NULL. + * + *---------------------------------------------------------------------- + */ + +Tcl_Obj * +TclGetInnerContext( + Tcl_Interp *interp, + const unsigned char *pc, + Tcl_Obj **tosPtr) +{ + int objc = 0, off = 0; + Tcl_Obj *result; + Interp *iPtr = (Interp *) interp; + + switch (*pc) { + case INST_STR_LEN: + case INST_LNOT: + case INST_BITNOT: + case INST_UMINUS: + case INST_UPLUS: + case INST_TRY_CVT_TO_NUMERIC: + case INST_EXPAND_STKTOP: + case INST_EXPR_STK: + objc = 1; + break; + + case INST_LIST_IN: + case INST_LIST_NOT_IN: /* Basic list containment operators. */ + case INST_STR_EQ: + case INST_STR_NEQ: /* String (in)equality check */ + case INST_STR_CMP: /* String compare. */ + case INST_STR_INDEX: + case INST_STR_MATCH: + case INST_REGEXP: + case INST_EQ: + case INST_NEQ: + case INST_LT: + case INST_GT: + case INST_LE: + case INST_GE: + case INST_MOD: + case INST_LSHIFT: + case INST_RSHIFT: + case INST_BITOR: + case INST_BITXOR: + case INST_BITAND: + case INST_EXPON: + case INST_ADD: + case INST_SUB: + case INST_DIV: + case INST_MULT: + objc = 2; + break; + + case INST_RETURN_STK: + /* early pop. TODO: dig out opt dict too :/ */ + objc = 1; + break; + + case INST_SYNTAX: + case INST_RETURN_IMM: + objc = 2; + break; + + case INST_INVOKE_STK4: + objc = TclGetUInt4AtPtr(pc+1); + break; + + case INST_INVOKE_STK1: + objc = TclGetUInt1AtPtr(pc+1); + break; + } + + result = iPtr->innerContext; + if (Tcl_IsShared(result)) { + Tcl_DecrRefCount(result); + iPtr->innerContext = result = Tcl_NewListObj(objc + 1, NULL); + Tcl_IncrRefCount(result); + } else { + int len; + + /* + * Reset while keeping the list intrep as much as possible. + */ + + Tcl_ListObjLength(interp, result, &len); + Tcl_ListObjReplace(interp, result, 0, len, 0, NULL); + } + Tcl_ListObjAppendElement(NULL, result, TclNewInstNameObj(*pc)); + + for (; objc>0 ; objc--) { + Tcl_Obj *objPtr; + + objPtr = tosPtr[1 - objc + off]; + if (!objPtr) { + Tcl_Panic("InnerContext: bad tos -- appending null object"); + } + if ((objPtr->refCount<=0) +#ifdef TCL_MEM_DEBUG + || (objPtr->refCount==0x61616161) +#endif + ) { + Tcl_Panic("InnerContext: bad tos -- appending freed object %p", + objPtr); + } + Tcl_ListObjAppendElement(NULL, result, objPtr); + } + + return result; +} + +/* + *---------------------------------------------------------------------- + * + * TclNewInstNameObj -- + * + * Creates a new InstName Tcl_Obj based on the given instruction + * + *---------------------------------------------------------------------- + */ + +Tcl_Obj * +TclNewInstNameObj( + unsigned char inst) +{ + Tcl_Obj *objPtr = Tcl_NewObj(); + + objPtr->typePtr = &tclInstNameType; + objPtr->internalRep.longValue = (long) inst; + objPtr->bytes = NULL; + + return objPtr; +} + +/* + *---------------------------------------------------------------------- + * + * UpdateStringOfInstName -- + * + * Update the string representation for an instruction name object. + * + *---------------------------------------------------------------------- + */ + +static void +UpdateStringOfInstName( + Tcl_Obj *objPtr) +{ + int inst = objPtr->internalRep.longValue; + char *s, buf[20]; + int len; + + if ((inst < 0) || (inst > LAST_INST_OPCODE)) { + sprintf(buf, "inst_%d", inst); + s = buf; + } else { + s = (char *) tclInstructionTable[objPtr->internalRep.longValue].name; + } + len = strlen(s); + objPtr->bytes = ckalloc(len + 1); + memcpy(objPtr->bytes, s, len + 1); + objPtr->length = len; +} + +/* + *---------------------------------------------------------------------- + * + * PrintSourceToObj -- + * + * Appends a quoted representation of a string to a Tcl_Obj. + * + *---------------------------------------------------------------------- + */ + +static void +PrintSourceToObj( + Tcl_Obj *appendObj, /* The object to print the source to. */ + const char *stringPtr, /* The string to print. */ + int maxChars) /* Maximum number of chars to print. */ +{ + register const char *p; + register int i = 0, len; + + if (stringPtr == NULL) { + Tcl_AppendToObj(appendObj, "\"\"", -1); + return; + } + + Tcl_AppendToObj(appendObj, "\"", -1); + p = stringPtr; + for (; (*p != '\0') && (i < maxChars); p+=len) { + Tcl_UniChar ch; + + len = TclUtfToUniChar(p, &ch); + switch (ch) { + case '"': + Tcl_AppendToObj(appendObj, "\\\"", -1); + i += 2; + continue; + case '\f': + Tcl_AppendToObj(appendObj, "\\f", -1); + i += 2; + continue; + case '\n': + Tcl_AppendToObj(appendObj, "\\n", -1); + i += 2; + continue; + case '\r': + Tcl_AppendToObj(appendObj, "\\r", -1); + i += 2; + continue; + case '\t': + Tcl_AppendToObj(appendObj, "\\t", -1); + i += 2; + continue; + case '\v': + Tcl_AppendToObj(appendObj, "\\v", -1); + i += 2; + continue; + default: + if (ch < 0x20 || ch >= 0x7f) { + Tcl_AppendPrintfToObj(appendObj, "\\u%04x", ch); + i += 6; + } else { + Tcl_AppendPrintfToObj(appendObj, "%c", ch); + i++; + } + continue; + } + } + Tcl_AppendToObj(appendObj, "\"", -1); + if (*p != '\0') { + Tcl_AppendToObj(appendObj, "...", -1); + } +} + +/* + *---------------------------------------------------------------------- + * + * DisassembleByteCodeAsDicts -- + * + * Given an object which is of bytecode type, return a disassembled + * version of the bytecode (in a new refcount 0 object) in a dictionary. + * No guarantees are made about the details of the contents of the + * result, but it is intended to be more readable than the old output + * format. + * + *---------------------------------------------------------------------- + */ + +static Tcl_Obj * +DisassembleByteCodeAsDicts( + Tcl_Obj *objPtr) /* The bytecode-holding value to take apart */ +{ + ByteCode *codePtr = BYTECODE(objPtr); + Tcl_Obj *description, *literals, *variables, *instructions, *inst; + Tcl_Obj *aux, *exn, *commands; + unsigned char *pc, *opnd, *codeOffPtr, *codeLenPtr, *srcOffPtr, *srcLenPtr; + int codeOffset, codeLength, sourceOffset, sourceLength; + int i, val; + + /* + * Get the literals from the bytecode. + */ + + literals = Tcl_NewObj(); + for (i=0 ; i<codePtr->numLitObjects ; i++) { + Tcl_ListObjAppendElement(NULL, literals, codePtr->objArrayPtr[i]); + } + + /* + * Get the variables from the bytecode. + */ + + variables = Tcl_NewObj(); + if (codePtr->procPtr) { + int localCount = codePtr->procPtr->numCompiledLocals; + CompiledLocal *localPtr = codePtr->procPtr->firstLocalPtr; + + for (i=0 ; i<localCount ; i++,localPtr=localPtr->nextPtr) { + Tcl_Obj *descriptor[2]; + + descriptor[0] = Tcl_NewObj(); + if (!(localPtr->flags & (VAR_ARRAY|VAR_LINK))) { + Tcl_ListObjAppendElement(NULL, descriptor[0], + Tcl_NewStringObj("scalar", -1)); + } + if (localPtr->flags & VAR_ARRAY) { + Tcl_ListObjAppendElement(NULL, descriptor[0], + Tcl_NewStringObj("array", -1)); + } + if (localPtr->flags & VAR_LINK) { + Tcl_ListObjAppendElement(NULL, descriptor[0], + Tcl_NewStringObj("link", -1)); + } + if (localPtr->flags & VAR_ARGUMENT) { + Tcl_ListObjAppendElement(NULL, descriptor[0], + Tcl_NewStringObj("arg", -1)); + } + if (localPtr->flags & VAR_TEMPORARY) { + Tcl_ListObjAppendElement(NULL, descriptor[0], + Tcl_NewStringObj("temp", -1)); + } + if (localPtr->flags & VAR_RESOLVED) { + Tcl_ListObjAppendElement(NULL, descriptor[0], + Tcl_NewStringObj("resolved", -1)); + } + if (localPtr->flags & VAR_TEMPORARY) { + Tcl_ListObjAppendElement(NULL, variables, + Tcl_NewListObj(1, descriptor)); + } else { + descriptor[1] = Tcl_NewStringObj(localPtr->name, -1); + Tcl_ListObjAppendElement(NULL, variables, + Tcl_NewListObj(2, descriptor)); + } + } + } + + /* + * Get the instructions from the bytecode. + */ + + instructions = Tcl_NewObj(); + for (pc=codePtr->codeStart; pc<codePtr->codeStart+codePtr->numCodeBytes;){ + const InstructionDesc *instDesc = &tclInstructionTable[*pc]; + int address = pc - codePtr->codeStart; + + inst = Tcl_NewObj(); + Tcl_ListObjAppendElement(NULL, inst, Tcl_NewStringObj( + instDesc->name, -1)); + opnd = pc + 1; + for (i=0 ; i<instDesc->numOperands ; i++) { + switch (instDesc->opTypes[i]) { + case OPERAND_INT1: + val = TclGetInt1AtPtr(opnd); + opnd += 1; + goto formatNumber; + case OPERAND_UINT1: + val = TclGetUInt1AtPtr(opnd); + opnd += 1; + goto formatNumber; + case OPERAND_INT4: + val = TclGetInt4AtPtr(opnd); + opnd += 4; + goto formatNumber; + case OPERAND_UINT4: + val = TclGetUInt4AtPtr(opnd); + opnd += 4; + formatNumber: + Tcl_ListObjAppendElement(NULL, inst, Tcl_NewIntObj(val)); + break; + + case OPERAND_OFFSET1: + val = TclGetInt1AtPtr(opnd); + opnd += 1; + goto formatAddress; + case OPERAND_OFFSET4: + val = TclGetInt4AtPtr(opnd); + opnd += 4; + formatAddress: + Tcl_ListObjAppendElement(NULL, inst, Tcl_ObjPrintf( + "pc %d", address + val)); + break; + + case OPERAND_LIT1: + val = TclGetUInt1AtPtr(opnd); + opnd += 1; + goto formatLiteral; + case OPERAND_LIT4: + val = TclGetUInt4AtPtr(opnd); + opnd += 4; + formatLiteral: + Tcl_ListObjAppendElement(NULL, inst, Tcl_ObjPrintf( + "@%d", val)); + break; + + case OPERAND_LVT1: + val = TclGetUInt1AtPtr(opnd); + opnd += 1; + goto formatVariable; + case OPERAND_LVT4: + val = TclGetUInt4AtPtr(opnd); + opnd += 4; + formatVariable: + Tcl_ListObjAppendElement(NULL, inst, Tcl_ObjPrintf( + "%%%d", val)); + break; + case OPERAND_IDX4: + val = TclGetInt4AtPtr(opnd); + opnd += 4; + if (val >= -1) { + Tcl_ListObjAppendElement(NULL, inst, Tcl_ObjPrintf( + ".%d", val)); + } else if (val == -2) { + Tcl_ListObjAppendElement(NULL, inst, Tcl_NewStringObj( + ".end", -1)); + } else { + Tcl_ListObjAppendElement(NULL, inst, Tcl_ObjPrintf( + ".end-%d", -2-val)); + } + break; + case OPERAND_AUX4: + val = TclGetInt4AtPtr(opnd); + opnd += 4; + Tcl_ListObjAppendElement(NULL, inst, Tcl_ObjPrintf( + "?%d", val)); + break; + case OPERAND_SCLS1: + val = TclGetUInt1AtPtr(opnd); + opnd++; + Tcl_ListObjAppendElement(NULL, inst, Tcl_ObjPrintf( + "=%s", tclStringClassTable[val].name)); + break; + case OPERAND_NONE: + Tcl_Panic("opcode %d with more than zero 'no' operands", *pc); + } + } + Tcl_DictObjPut(NULL, instructions, Tcl_NewIntObj(address), inst); + pc += instDesc->numBytes; + } + + /* + * Get the auxiliary data from the bytecode. + */ + + aux = Tcl_NewObj(); + for (i=0 ; i<codePtr->numAuxDataItems ; i++) { + AuxData *auxData = &codePtr->auxDataArrayPtr[i]; + Tcl_Obj *auxDesc = Tcl_NewStringObj(auxData->type->name, -1); + + if (auxData->type->disassembleProc) { + Tcl_Obj *desc = Tcl_NewObj(); + + Tcl_DictObjPut(NULL, desc, Tcl_NewStringObj("name", -1), auxDesc); + auxDesc = desc; + auxData->type->disassembleProc(auxData->clientData, auxDesc, + codePtr, 0); + } else if (auxData->type->printProc) { + Tcl_Obj *desc = Tcl_NewObj(); + + auxData->type->printProc(auxData->clientData, desc, codePtr, 0); + Tcl_ListObjAppendElement(NULL, auxDesc, desc); + } + Tcl_ListObjAppendElement(NULL, aux, auxDesc); + } + + /* + * Get the exception ranges from the bytecode. + */ + + exn = Tcl_NewObj(); + for (i=0 ; i<codePtr->numExceptRanges ; i++) { + ExceptionRange *rangePtr = &codePtr->exceptArrayPtr[i]; + + switch (rangePtr->type) { + case LOOP_EXCEPTION_RANGE: + Tcl_ListObjAppendElement(NULL, exn, Tcl_ObjPrintf( + "type %s level %d from %d to %d break %d continue %d", + "loop", rangePtr->nestingLevel, rangePtr->codeOffset, + rangePtr->codeOffset + rangePtr->numCodeBytes - 1, + rangePtr->breakOffset, rangePtr->continueOffset)); + break; + case CATCH_EXCEPTION_RANGE: + Tcl_ListObjAppendElement(NULL, exn, Tcl_ObjPrintf( + "type %s level %d from %d to %d catch %d", + "catch", rangePtr->nestingLevel, rangePtr->codeOffset, + rangePtr->codeOffset + rangePtr->numCodeBytes - 1, + rangePtr->catchOffset)); + break; + } + } + + /* + * Get the command information from the bytecode. + * + * The way these are encoded in the bytecode is non-trivial; the Decode + * macro (which updates its argument and returns the next decoded value) + * handles this so that the rest of the code does not. + */ + +#define Decode(ptr) \ + ((TclGetUInt1AtPtr(ptr) == 0xFF) \ + ? ((ptr)+=5 , TclGetInt4AtPtr((ptr)-4)) \ + : ((ptr)+=1 , TclGetInt1AtPtr((ptr)-1))) + + commands = Tcl_NewObj(); + codeOffPtr = codePtr->codeDeltaStart; + codeLenPtr = codePtr->codeLengthStart; + srcOffPtr = codePtr->srcDeltaStart; + srcLenPtr = codePtr->srcLengthStart; + codeOffset = sourceOffset = 0; + for (i=0 ; i<codePtr->numCommands ; i++) { + Tcl_Obj *cmd; + + codeOffset += Decode(codeOffPtr); + codeLength = Decode(codeLenPtr); + sourceOffset += Decode(srcOffPtr); + sourceLength = Decode(srcLenPtr); + cmd = Tcl_NewObj(); + Tcl_DictObjPut(NULL, cmd, Tcl_NewStringObj("codefrom", -1), + Tcl_NewIntObj(codeOffset)); + Tcl_DictObjPut(NULL, cmd, Tcl_NewStringObj("codeto", -1), + Tcl_NewIntObj(codeOffset + codeLength - 1)); + + /* + * Convert byte offsets to character offsets; important if multibyte + * characters are present in the source! + */ + + Tcl_DictObjPut(NULL, cmd, Tcl_NewStringObj("scriptfrom", -1), + Tcl_NewIntObj(Tcl_NumUtfChars(codePtr->source, + sourceOffset))); + Tcl_DictObjPut(NULL, cmd, Tcl_NewStringObj("scriptto", -1), + Tcl_NewIntObj(Tcl_NumUtfChars(codePtr->source, + sourceOffset + sourceLength - 1))); + Tcl_DictObjPut(NULL, cmd, Tcl_NewStringObj("script", -1), + Tcl_NewStringObj(codePtr->source+sourceOffset, sourceLength)); + Tcl_ListObjAppendElement(NULL, commands, cmd); + } + +#undef Decode + + /* + * Build the overall result. + */ + + description = Tcl_NewObj(); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("literals", -1), + literals); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("variables", -1), + variables); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("exception", -1), exn); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("instructions", -1), + instructions); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("auxiliary", -1), aux); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("commands", -1), + commands); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("script", -1), + Tcl_NewStringObj(codePtr->source, codePtr->numSrcBytes)); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("namespace", -1), + Tcl_NewStringObj(codePtr->nsPtr->fullName, -1)); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("stackdepth", -1), + Tcl_NewIntObj(codePtr->maxStackDepth)); + Tcl_DictObjPut(NULL, description, Tcl_NewStringObj("exceptdepth", -1), + Tcl_NewIntObj(codePtr->maxExceptDepth)); + return description; +} + +/* + *---------------------------------------------------------------------- + * + * Tcl_DisassembleObjCmd -- + * + * Implementation of the "::tcl::unsupported::disassemble" command. This + * command is not documented, but will disassemble procedures, lambda + * terms and general scripts. Note that will compile terms if necessary + * in order to disassemble them. + * + *---------------------------------------------------------------------- + */ + +int +Tcl_DisassembleObjCmd( + ClientData clientData, /* What type of operation. */ + Tcl_Interp *interp, /* Current interpreter. */ + int objc, /* Number of arguments. */ + Tcl_Obj *const objv[]) /* Argument objects. */ +{ + static const char *const types[] = { + "lambda", "method", "objmethod", "proc", "script", NULL + }; + enum Types { + DISAS_LAMBDA, DISAS_CLASS_METHOD, DISAS_OBJECT_METHOD, DISAS_PROC, + DISAS_SCRIPT + }; + int idx, result; + Tcl_Obj *codeObjPtr = NULL; + Proc *procPtr = NULL; + Tcl_HashEntry *hPtr; + Object *oPtr; + + if (objc < 2) { + Tcl_WrongNumArgs(interp, 1, objv, "type ..."); + return TCL_ERROR; + } + if (Tcl_GetIndexFromObj(interp, objv[1], types, "type", 0, &idx)!=TCL_OK){ + return TCL_ERROR; + } + + switch ((enum Types) idx) { + case DISAS_LAMBDA: { + Command cmd; + Tcl_Obj *nsObjPtr; + Tcl_Namespace *nsPtr; + + /* + * Compile (if uncompiled) and disassemble a lambda term. + * + * WARNING! Pokes inside the lambda objtype. + */ + + if (objc != 3) { + Tcl_WrongNumArgs(interp, 2, objv, "lambdaTerm"); + return TCL_ERROR; + } + if (objv[2]->typePtr == &tclLambdaType) { + procPtr = objv[2]->internalRep.twoPtrValue.ptr1; + } + if (procPtr == NULL || procPtr->iPtr != (Interp *) interp) { + result = tclLambdaType.setFromAnyProc(interp, objv[2]); + if (result != TCL_OK) { + return result; + } + procPtr = objv[2]->internalRep.twoPtrValue.ptr1; + } + + memset(&cmd, 0, sizeof(Command)); + nsObjPtr = objv[2]->internalRep.twoPtrValue.ptr2; + result = TclGetNamespaceFromObj(interp, nsObjPtr, &nsPtr); + if (result != TCL_OK) { + return result; + } + cmd.nsPtr = (Namespace *) nsPtr; + procPtr->cmdPtr = &cmd; + result = TclPushProcCallFrame(procPtr, interp, objc, objv, 1); + if (result != TCL_OK) { + return result; + } + TclPopStackFrame(interp); + codeObjPtr = procPtr->bodyPtr; + break; + } + case DISAS_PROC: + if (objc != 3) { + Tcl_WrongNumArgs(interp, 2, objv, "procName"); + return TCL_ERROR; + } + + procPtr = TclFindProc((Interp *) interp, TclGetString(objv[2])); + if (procPtr == NULL) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "\"%s\" isn't a procedure", TclGetString(objv[2]))); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "PROC", + TclGetString(objv[2]), NULL); + return TCL_ERROR; + } + + /* + * Compile (if uncompiled) and disassemble a procedure. + */ + + result = TclPushProcCallFrame(procPtr, interp, 2, objv+1, 1); + if (result != TCL_OK) { + return result; + } + TclPopStackFrame(interp); + codeObjPtr = procPtr->bodyPtr; + break; + case DISAS_SCRIPT: + /* + * Compile and disassemble a script. + */ + + if (objc != 3) { + Tcl_WrongNumArgs(interp, 2, objv, "script"); + return TCL_ERROR; + } + if ((objv[2]->typePtr != &tclByteCodeType) + && (TclSetByteCodeFromAny(interp, objv[2], NULL, NULL) != TCL_OK)) { + return TCL_ERROR; + } + codeObjPtr = objv[2]; + break; + + case DISAS_CLASS_METHOD: + if (objc != 4) { + Tcl_WrongNumArgs(interp, 2, objv, "className methodName"); + return TCL_ERROR; + } + + /* + * Look up the body of a class method. + */ + + oPtr = (Object *) Tcl_GetObjectFromObj(interp, objv[2]); + if (oPtr == NULL) { + return TCL_ERROR; + } + if (oPtr->classPtr == NULL) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "\"%s\" is not a class", TclGetString(objv[2]))); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "CLASS", + TclGetString(objv[2]), NULL); + return TCL_ERROR; + } + hPtr = Tcl_FindHashEntry(&oPtr->classPtr->classMethods, + (char *) objv[3]); + goto methodBody; + case DISAS_OBJECT_METHOD: + if (objc != 4) { + Tcl_WrongNumArgs(interp, 2, objv, "objectName methodName"); + return TCL_ERROR; + } + + /* + * Look up the body of an instance method. + */ + + oPtr = (Object *) Tcl_GetObjectFromObj(interp, objv[2]); + if (oPtr == NULL) { + return TCL_ERROR; + } + if (oPtr->methodsPtr == NULL) { + goto unknownMethod; + } + hPtr = Tcl_FindHashEntry(oPtr->methodsPtr, (char *) objv[3]); + + /* + * Compile (if necessary) and disassemble a method body. + */ + + methodBody: + if (hPtr == NULL) { + unknownMethod: + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "unknown method \"%s\"", TclGetString(objv[3]))); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "METHOD", + TclGetString(objv[3]), NULL); + return TCL_ERROR; + } + procPtr = TclOOGetProcFromMethod(Tcl_GetHashValue(hPtr)); + if (procPtr == NULL) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "body not available for this kind of method", -1)); + Tcl_SetErrorCode(interp, "TCL", "OPERATION", "DISASSEMBLE", + "METHODTYPE", NULL); + return TCL_ERROR; + } + if (procPtr->bodyPtr->typePtr != &tclByteCodeType) { + Command cmd; + + /* + * Yes, this is ugly, but we need to pass the namespace in to the + * compiler in two places. + */ + + cmd.nsPtr = (Namespace *) oPtr->namespacePtr; + procPtr->cmdPtr = &cmd; + result = TclProcCompileProc(interp, procPtr, procPtr->bodyPtr, + (Namespace *) oPtr->namespacePtr, "body of method", + TclGetString(objv[3])); + procPtr->cmdPtr = NULL; + if (result != TCL_OK) { + return result; + } + } + codeObjPtr = procPtr->bodyPtr; + break; + default: + CLANG_ASSERT(0); + } + + /* + * Do the actual disassembly. + */ + + if (BYTECODE(codeObjPtr)->flags & TCL_BYTECODE_PRECOMPILED) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "may not disassemble prebuilt bytecode", -1)); + Tcl_SetErrorCode(interp, "TCL", "OPERATION", "DISASSEMBLE", + "BYTECODE", NULL); + return TCL_ERROR; + } + if (PTR2INT(clientData)) { + Tcl_SetObjResult(interp, DisassembleByteCodeAsDicts(codeObjPtr)); + } else { + Tcl_SetObjResult(interp, TclDisassembleByteCodeObj(codeObjPtr)); + } + return TCL_OK; +} + +/* + * Local Variables: + * mode: c + * c-basic-offset: 4 + * fill-column: 78 + * tab-width: 8 + * End: + */ |