diff options
Diffstat (limited to 'generic/tclEvent.c')
| -rw-r--r-- | generic/tclEvent.c | 1585 |
1 files changed, 1056 insertions, 529 deletions
diff --git a/generic/tclEvent.c b/generic/tclEvent.c index d85a550..941d566 100644 --- a/generic/tclEvent.c +++ b/generic/tclEvent.c @@ -1,52 +1,45 @@ -/* +/* * tclEvent.c -- * * This file implements some general event related interfaces including - * background errors, exit handlers, and the "vwait" and "update" - * command procedures. + * background errors, exit handlers, and the "vwait" and "update" command + * functions. * * Copyright (c) 1990-1994 The Regents of the University of California. * Copyright (c) 1994-1998 Sun Microsystems, Inc. + * Copyright (c) 2004 by Zoran Vasiljevic. * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * RCS: @(#) $Id: tclEvent.c,v 1.19 2002/01/25 20:40:55 dgp Exp $ + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclInt.h" -#include "tclPort.h" /* - * The data structure below is used to report background errors. One - * such structure is allocated for each error; it holds information - * about the interpreter and the error until bgerror can be invoked - * later as an idle handler. + * The data structure below is used to report background errors. One such + * structure is allocated for each error; it holds information about the + * interpreter and the error until an idle handler command can be invoked. */ typedef struct BgError { - Tcl_Interp *interp; /* Interpreter in which error occurred. NULL - * means this error report has been cancelled - * (a previous report generated a break). */ - char *errorMsg; /* Copy of the error message (the interp's - * result when the error occurred). - * Malloc-ed. */ - char *errorInfo; /* Value of the errorInfo variable - * (malloc-ed). */ - char *errorCode; /* Value of the errorCode variable - * (malloc-ed). */ - struct BgError *nextPtr; /* Next in list of all pending error - * reports for this interpreter, or NULL - * for end of list. */ + Tcl_Obj *errorMsg; /* Copy of the error message (the interp's + * result when the error occurred). */ + Tcl_Obj *returnOpts; /* Active return options when the error + * occurred */ + struct BgError *nextPtr; /* Next in list of all pending error reports + * for this interpreter, or NULL for end of + * list. */ } BgError; /* - * One of the structures below is associated with the "tclBgError" - * assoc data for each interpreter. It keeps track of the head and - * tail of the list of pending background errors for the interpreter. + * One of the structures below is associated with the "tclBgError" assoc data + * for each interpreter. It keeps track of the head and tail of the list of + * pending background errors for the interpreter. */ typedef struct ErrAssocData { + Tcl_Interp *interp; /* Interpreter in which error occurred. */ + Tcl_Obj *cmdPrefix; /* First word(s) of the handler command */ BgError *firstBgPtr; /* First in list of all background errors * waiting to be processed for this * interpreter (NULL if none). */ @@ -56,143 +49,128 @@ typedef struct ErrAssocData { } ErrAssocData; /* - * For each exit handler created with a call to Tcl_CreateExitHandler + * For each exit handler created with a call to Tcl_Create(Late)ExitHandler * there is a structure of the following type: */ typedef struct ExitHandler { - Tcl_ExitProc *proc; /* Procedure to call when process exits. */ + Tcl_ExitProc *proc; /* Function to call when process exits. */ ClientData clientData; /* One word of information to pass to proc. */ - struct ExitHandler *nextPtr;/* Next in list of all exit handlers for - * this application, or NULL for end of list. */ + struct ExitHandler *nextPtr;/* Next in list of all exit handlers for this + * application, or NULL for end of list. */ } ExitHandler; /* - * There is both per-process and per-thread exit handlers. - * The first list is controlled by a mutex. The other is in - * thread local storage. + * There is both per-process and per-thread exit handlers. The first list is + * controlled by a mutex. The other is in thread local storage. */ static ExitHandler *firstExitPtr = NULL; /* First in list of all exit handlers for * application. */ +static ExitHandler *firstLateExitPtr = NULL; + /* First in list of all late exit handlers for + * application. */ TCL_DECLARE_MUTEX(exitMutex) /* - * This variable is set to 1 when Tcl_Finalize is called, and at the end of - * its work, it is reset to 0. The variable is checked by TclInExit() to - * allow different behavior for exit-time processing, e.g. in closing of - * files and pipes. + * This variable is set to 1 when Tcl_Exit is called. The variable is checked + * by TclInExit() to allow different behavior for exit-time processing, e.g., + * in closing of files and pipes. */ -static int inFinalize = 0; +static int inExit = 0; + static int subsystemsInitialized = 0; +/* + * This variable contains the application wide exit handler. It will be called + * by Tcl_Exit instead of the C-runtime exit if this variable is set to a + * non-NULL value. + */ + +static Tcl_ExitProc *appExitPtr = NULL; + typedef struct ThreadSpecificData { - ExitHandler *firstExitPtr; /* First in list of all exit handlers for - * this thread. */ - int inExit; /* True when this thread is exiting. This - * is used as a hack to decide to close - * the standard channels. */ - Tcl_Obj *tclLibraryPath; /* Path(s) to the Tcl library */ + ExitHandler *firstExitPtr; /* First in list of all exit handlers for this + * thread. */ + int inExit; /* True when this thread is exiting. This is + * used as a hack to decide to close the + * standard channels. */ } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; -/* - * Common string for the library path for sharing across threads. - */ -char *tclLibraryPathStr; +#ifdef TCL_THREADS +typedef struct { + Tcl_ThreadCreateProc *proc; /* Main() function of the thread */ + ClientData clientData; /* The one argument to Main() */ +} ThreadClientData; +static Tcl_ThreadCreateType NewThreadProc(ClientData clientData); +#endif /* TCL_THREADS */ /* - * Prototypes for procedures referenced only in this file: + * Prototypes for functions referenced only in this file: */ -static void BgErrorDeleteProc _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp)); -static void HandleBgErrors _ANSI_ARGS_((ClientData clientData)); -static char * VwaitVarProc _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, char *name1, char *name2, - int flags)); +static void BgErrorDeleteProc(ClientData clientData, + Tcl_Interp *interp); +static void HandleBgErrors(ClientData clientData); +static char * VwaitVarProc(ClientData clientData, + Tcl_Interp *interp, const char *name1, + const char *name2, int flags); +static void InvokeExitHandlers(void); /* *---------------------------------------------------------------------- * * Tcl_BackgroundError -- * - * This procedure is invoked to handle errors that occur in Tcl - * commands that are invoked in "background" (e.g. from event or - * timer bindings). + * This function is invoked to handle errors that occur in Tcl commands + * that are invoked in "background" (e.g. from event or timer bindings). * * Results: * None. * * Side effects: - * The command "bgerror" is invoked later as an idle handler to - * process the error, passing it the error message. If that fails, - * then an error message is output on stderr. + * A handler command is invoked later as an idle handler to process the + * error, passing it the interp result and return options. * *---------------------------------------------------------------------- */ void -Tcl_BackgroundError(interp) - Tcl_Interp *interp; /* Interpreter in which an error has +Tcl_BackgroundError( + Tcl_Interp *interp) /* Interpreter in which an error has + * occurred. */ +{ + Tcl_BackgroundException(interp, TCL_ERROR); +} + +void +Tcl_BackgroundException( + Tcl_Interp *interp, /* Interpreter in which an exception has * occurred. */ + int code) /* The exception code value */ { BgError *errPtr; - CONST char *errResult, *varValue; ErrAssocData *assocPtr; - int length; - /* - * The Tcl_AddErrorInfo call below (with an empty string) ensures that - * errorInfo gets properly set. It's needed in cases where the error - * came from a utility procedure like Tcl_GetVar instead of Tcl_Eval; - * in these cases errorInfo still won't have been set when this - * procedure is called. - */ - - Tcl_AddErrorInfo(interp, ""); - - errResult = Tcl_GetStringFromObj(Tcl_GetObjResult(interp), &length); - - errPtr = (BgError *) ckalloc(sizeof(BgError)); - errPtr->interp = interp; - errPtr->errorMsg = (char *) ckalloc((unsigned) (length + 1)); - memcpy(errPtr->errorMsg, errResult, (size_t) (length + 1)); - varValue = Tcl_GetVar(interp, "errorInfo", TCL_GLOBAL_ONLY); - if (varValue == NULL) { - varValue = errPtr->errorMsg; - } - errPtr->errorInfo = (char *) ckalloc((unsigned) (strlen(varValue) + 1)); - strcpy(errPtr->errorInfo, varValue); - varValue = Tcl_GetVar(interp, "errorCode", TCL_GLOBAL_ONLY); - if (varValue == NULL) { - varValue = ""; + if (code == TCL_OK) { + return; } - errPtr->errorCode = (char *) ckalloc((unsigned) (strlen(varValue) + 1)); - strcpy(errPtr->errorCode, varValue); - errPtr->nextPtr = NULL; - - assocPtr = (ErrAssocData *) Tcl_GetAssocData(interp, "tclBgError", - (Tcl_InterpDeleteProc **) NULL); - if (assocPtr == NULL) { - /* - * This is the first time a background error has occurred in - * this interpreter. Create associated data to keep track of - * pending error reports. - */ + errPtr = ckalloc(sizeof(BgError)); + errPtr->errorMsg = Tcl_GetObjResult(interp); + Tcl_IncrRefCount(errPtr->errorMsg); + errPtr->returnOpts = Tcl_GetReturnOptions(interp, code); + Tcl_IncrRefCount(errPtr->returnOpts); + errPtr->nextPtr = NULL; - assocPtr = (ErrAssocData *) ckalloc(sizeof(ErrAssocData)); - assocPtr->firstBgPtr = NULL; - assocPtr->lastBgPtr = NULL; - Tcl_SetAssocData(interp, "tclBgError", BgErrorDeleteProc, - (ClientData) assocPtr); - } + (void) TclGetBgErrorHandler(interp); + assocPtr = Tcl_GetAssocData(interp, "tclBgError", NULL); if (assocPtr->firstBgPtr == NULL) { assocPtr->firstBgPtr = errPtr; - Tcl_DoWhenIdle(HandleBgErrors, (ClientData) assocPtr); + Tcl_DoWhenIdle(HandleBgErrors, assocPtr); } else { assocPtr->lastBgPtr->nextPtr = errPtr; } @@ -205,145 +183,392 @@ Tcl_BackgroundError(interp) * * HandleBgErrors -- * - * This procedure is invoked as an idle handler to process all of - * the accumulated background errors. + * This function is invoked as an idle handler to process all of the + * accumulated background errors. * * Results: * None. * * Side effects: - * Depends on what actions "bgerror" takes for the errors. + * Depends on what actions the handler command takes for the errors. * *---------------------------------------------------------------------- */ static void -HandleBgErrors(clientData) - ClientData clientData; /* Pointer to ErrAssocData structure. */ +HandleBgErrors( + ClientData clientData) /* Pointer to ErrAssocData structure. */ { - Tcl_Interp *interp; - char *argv[2]; - int code; + ErrAssocData *assocPtr = clientData; + Tcl_Interp *interp = assocPtr->interp; BgError *errPtr; - ErrAssocData *assocPtr = (ErrAssocData *) clientData; - Tcl_Channel errChannel; - Tcl_Preserve((ClientData) assocPtr); - + /* + * Not bothering to save/restore the interp state. Assume that any code + * that has interp state it needs to keep will make its own + * Tcl_SaveInterpState call before calling something like Tcl_DoOneEvent() + * that could lead us here. + */ + + Tcl_Preserve(assocPtr); + Tcl_Preserve(interp); while (assocPtr->firstBgPtr != NULL) { - interp = assocPtr->firstBgPtr->interp; - if (interp == NULL) { - goto doneWithInterp; - } + int code, prefixObjc; + Tcl_Obj **prefixObjv, **tempObjv; /* - * Restore important state variables to what they were at - * the time the error occurred. + * Note we copy the handler command prefix each pass through, so we do + * support one handler setting another handler. */ - Tcl_SetVar(interp, "errorInfo", assocPtr->firstBgPtr->errorInfo, - TCL_GLOBAL_ONLY); - Tcl_SetVar(interp, "errorCode", assocPtr->firstBgPtr->errorCode, - TCL_GLOBAL_ONLY); + Tcl_Obj *copyObj = TclListObjCopy(NULL, assocPtr->cmdPrefix); + + errPtr = assocPtr->firstBgPtr; + + Tcl_ListObjGetElements(NULL, copyObj, &prefixObjc, &prefixObjv); + tempObjv = ckalloc((prefixObjc+2) * sizeof(Tcl_Obj *)); + memcpy(tempObjv, prefixObjv, prefixObjc*sizeof(Tcl_Obj *)); + tempObjv[prefixObjc] = errPtr->errorMsg; + tempObjv[prefixObjc+1] = errPtr->returnOpts; + Tcl_AllowExceptions(interp); + code = Tcl_EvalObjv(interp, prefixObjc+2, tempObjv, TCL_EVAL_GLOBAL); /* - * Create and invoke the bgerror command. + * Discard the command and the information about the error report. */ - argv[0] = "bgerror"; - argv[1] = assocPtr->firstBgPtr->errorMsg; - - Tcl_AllowExceptions(interp); - Tcl_Preserve((ClientData) interp); - code = TclGlobalInvoke(interp, 2, argv, 0); - if (code == TCL_ERROR) { - - /* - * If the interpreter is safe, we look for a hidden command - * named "bgerror" and call that with the error information. - * Otherwise, simply ignore the error. The rationale is that - * this could be an error caused by a malicious applet trying - * to cause an infinite barrage of error messages. The hidden - * "bgerror" command can be used by a security policy to - * interpose on such attacks and e.g. kill the applet after a - * few attempts. - */ - - if (Tcl_IsSafe(interp)) { - Tcl_SavedResult save; - - Tcl_SaveResult(interp, &save); - TclGlobalInvoke(interp, 2, argv, TCL_INVOKE_HIDDEN); - Tcl_RestoreResult(interp, &save); - - goto doneWithInterp; - } - - /* - * We have to get the error output channel at the latest possible - * time, because the eval (above) might have changed the channel. - */ - - errChannel = Tcl_GetStdChannel(TCL_STDERR); - if (errChannel != (Tcl_Channel) NULL) { - char *string; - int len; - - string = Tcl_GetStringFromObj(Tcl_GetObjResult(interp), &len); - if (Tcl_FindCommand(interp, "bgerror", NULL, TCL_GLOBAL_ONLY) == NULL) { - Tcl_WriteChars(errChannel, assocPtr->firstBgPtr->errorInfo, -1); - Tcl_WriteChars(errChannel, "\n", -1); - } else { - Tcl_WriteChars(errChannel, - "bgerror failed to handle background error.\n", - -1); - Tcl_WriteChars(errChannel, " Original error: ", -1); - Tcl_WriteChars(errChannel, assocPtr->firstBgPtr->errorMsg, - -1); - Tcl_WriteChars(errChannel, "\n", -1); - Tcl_WriteChars(errChannel, " Error in bgerror: ", -1); - Tcl_WriteChars(errChannel, string, len); - Tcl_WriteChars(errChannel, "\n", -1); - } - Tcl_Flush(errChannel); - } - } else if (code == TCL_BREAK) { + Tcl_DecrRefCount(copyObj); + Tcl_DecrRefCount(errPtr->errorMsg); + Tcl_DecrRefCount(errPtr->returnOpts); + assocPtr->firstBgPtr = errPtr->nextPtr; + ckfree(errPtr); + ckfree(tempObjv); + if (code == TCL_BREAK) { /* * Break means cancel any remaining error reports for this * interpreter. */ - for (errPtr = assocPtr->firstBgPtr; errPtr != NULL; - errPtr = errPtr->nextPtr) { - if (errPtr->interp == interp) { - errPtr->interp = NULL; + while (assocPtr->firstBgPtr != NULL) { + errPtr = assocPtr->firstBgPtr; + assocPtr->firstBgPtr = errPtr->nextPtr; + Tcl_DecrRefCount(errPtr->errorMsg); + Tcl_DecrRefCount(errPtr->returnOpts); + ckfree(errPtr); + } + } else if ((code == TCL_ERROR) && !Tcl_IsSafe(interp)) { + Tcl_Channel errChannel = Tcl_GetStdChannel(TCL_STDERR); + + if (errChannel != NULL) { + Tcl_Obj *options = Tcl_GetReturnOptions(interp, code); + Tcl_Obj *keyPtr, *valuePtr; + + TclNewLiteralStringObj(keyPtr, "-errorinfo"); + Tcl_IncrRefCount(keyPtr); + Tcl_DictObjGet(NULL, options, keyPtr, &valuePtr); + Tcl_DecrRefCount(keyPtr); + + Tcl_WriteChars(errChannel, + "error in background error handler:\n", -1); + if (valuePtr) { + Tcl_WriteObj(errChannel, valuePtr); + } else { + Tcl_WriteObj(errChannel, Tcl_GetObjResult(interp)); } + Tcl_WriteChars(errChannel, "\n", 1); + Tcl_Flush(errChannel); + Tcl_DecrRefCount(options); } } + } + assocPtr->lastBgPtr = NULL; + Tcl_Release(interp); + Tcl_Release(assocPtr); +} + +/* + *---------------------------------------------------------------------- + * + * TclDefaultBgErrorHandlerObjCmd -- + * + * This function is invoked to process the "::tcl::Bgerror" Tcl command. + * It is the default handler command registered with [interp bgerror] for + * the sake of compatibility with older Tcl releases. + * + * Results: + * A standard Tcl object result. + * + * Side effects: + * Depends on what actions the "bgerror" command takes for the errors. + * + *---------------------------------------------------------------------- + */ + +int +TclDefaultBgErrorHandlerObjCmd( + ClientData dummy, /* Not used. */ + Tcl_Interp *interp, /* Current interpreter. */ + int objc, /* Number of arguments. */ + Tcl_Obj *const objv[]) /* Argument objects. */ +{ + Tcl_Obj *keyPtr, *valuePtr; + Tcl_Obj *tempObjv[2]; + int code, level; + Tcl_InterpState saved; + + if (objc != 3) { + Tcl_WrongNumArgs(interp, 1, objv, "msg options"); + return TCL_ERROR; + } + + /* + * Check for a valid return options dictionary. + */ + TclNewLiteralStringObj(keyPtr, "-level"); + Tcl_IncrRefCount(keyPtr); + Tcl_DictObjGet(NULL, objv[2], keyPtr, &valuePtr); + Tcl_DecrRefCount(keyPtr); + if (valuePtr == NULL) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "missing return option \"-level\"", -1)); + Tcl_SetErrorCode(interp, "TCL", "ARGUMENT", "MISSING", NULL); + return TCL_ERROR; + } + if (Tcl_GetIntFromObj(interp, valuePtr, &level) == TCL_ERROR) { + return TCL_ERROR; + } + TclNewLiteralStringObj(keyPtr, "-code"); + Tcl_IncrRefCount(keyPtr); + Tcl_DictObjGet(NULL, objv[2], keyPtr, &valuePtr); + Tcl_DecrRefCount(keyPtr); + if (valuePtr == NULL) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "missing return option \"-code\"", -1)); + Tcl_SetErrorCode(interp, "TCL", "ARGUMENT", "MISSING", NULL); + return TCL_ERROR; + } + if (Tcl_GetIntFromObj(interp, valuePtr, &code) == TCL_ERROR) { + return TCL_ERROR; + } + + if (level != 0) { /* - * Discard the command and the information about the error report. + * We're handling a TCL_RETURN exception. */ -doneWithInterp: + code = TCL_RETURN; + } + if (code == TCL_OK) { + /* + * Somehow we got to exception handling with no exception. (Pass + * TCL_OK to Tcl_BackgroundException()?) Just return without doing + * anything. + */ + + return TCL_OK; + } + + /* + * Construct the bgerror command. + */ - if (assocPtr->firstBgPtr) { - ckfree(assocPtr->firstBgPtr->errorMsg); - ckfree(assocPtr->firstBgPtr->errorInfo); - ckfree(assocPtr->firstBgPtr->errorCode); - errPtr = assocPtr->firstBgPtr->nextPtr; - ckfree((char *) assocPtr->firstBgPtr); - assocPtr->firstBgPtr = errPtr; + TclNewLiteralStringObj(tempObjv[0], "bgerror"); + Tcl_IncrRefCount(tempObjv[0]); + + /* + * Determine error message argument. Check the return options in case + * a non-error exception brought us here. + */ + + switch (code) { + case TCL_ERROR: + tempObjv[1] = objv[1]; + break; + case TCL_BREAK: + TclNewLiteralStringObj(tempObjv[1], + "invoked \"break\" outside of a loop"); + break; + case TCL_CONTINUE: + TclNewLiteralStringObj(tempObjv[1], + "invoked \"continue\" outside of a loop"); + break; + default: + tempObjv[1] = Tcl_ObjPrintf("command returned bad code: %d", code); + break; + } + Tcl_IncrRefCount(tempObjv[1]); + + if (code != TCL_ERROR) { + Tcl_SetObjResult(interp, tempObjv[1]); + } + + TclNewLiteralStringObj(keyPtr, "-errorcode"); + Tcl_IncrRefCount(keyPtr); + Tcl_DictObjGet(NULL, objv[2], keyPtr, &valuePtr); + Tcl_DecrRefCount(keyPtr); + if (valuePtr) { + Tcl_SetObjErrorCode(interp, valuePtr); + } + + TclNewLiteralStringObj(keyPtr, "-errorinfo"); + Tcl_IncrRefCount(keyPtr); + Tcl_DictObjGet(NULL, objv[2], keyPtr, &valuePtr); + Tcl_DecrRefCount(keyPtr); + if (valuePtr) { + Tcl_AppendObjToErrorInfo(interp, valuePtr); + } + + if (code == TCL_ERROR) { + Tcl_SetObjResult(interp, tempObjv[1]); + } + + /* + * Save interpreter state so we can restore it if multiple handler + * attempts are needed. + */ + + saved = Tcl_SaveInterpState(interp, code); + + /* + * Invoke the bgerror command. + */ + + Tcl_AllowExceptions(interp); + code = Tcl_EvalObjv(interp, 2, tempObjv, TCL_EVAL_GLOBAL); + if (code == TCL_ERROR) { + /* + * If the interpreter is safe, we look for a hidden command named + * "bgerror" and call that with the error information. Otherwise, + * simply ignore the error. The rationale is that this could be an + * error caused by a malicious applet trying to cause an infinite + * barrage of error messages. The hidden "bgerror" command can be used + * by a security policy to interpose on such attacks and e.g. kill the + * applet after a few attempts. + */ + + if (Tcl_IsSafe(interp)) { + Tcl_RestoreInterpState(interp, saved); + TclObjInvoke(interp, 2, tempObjv, TCL_INVOKE_HIDDEN); + } else { + Tcl_Channel errChannel = Tcl_GetStdChannel(TCL_STDERR); + + if (errChannel != NULL) { + Tcl_Obj *resultPtr = Tcl_GetObjResult(interp); + + Tcl_IncrRefCount(resultPtr); + if (Tcl_FindCommand(interp, "bgerror", NULL, + TCL_GLOBAL_ONLY) == NULL) { + Tcl_RestoreInterpState(interp, saved); + Tcl_WriteObj(errChannel, Tcl_GetVar2Ex(interp, + "errorInfo", NULL, TCL_GLOBAL_ONLY)); + Tcl_WriteChars(errChannel, "\n", -1); + } else { + Tcl_DiscardInterpState(saved); + Tcl_WriteChars(errChannel, + "bgerror failed to handle background error.\n",-1); + Tcl_WriteChars(errChannel, " Original error: ", -1); + Tcl_WriteObj(errChannel, tempObjv[1]); + Tcl_WriteChars(errChannel, "\n", -1); + Tcl_WriteChars(errChannel, " Error in bgerror: ", -1); + Tcl_WriteObj(errChannel, resultPtr); + Tcl_WriteChars(errChannel, "\n", -1); + } + Tcl_DecrRefCount(resultPtr); + Tcl_Flush(errChannel); + } else { + Tcl_DiscardInterpState(saved); + } } - - if (interp != NULL) { - Tcl_Release((ClientData) interp); - } + code = TCL_OK; + } else { + Tcl_DiscardInterpState(saved); } - assocPtr->lastBgPtr = NULL; - Tcl_Release((ClientData) assocPtr); + Tcl_DecrRefCount(tempObjv[0]); + Tcl_DecrRefCount(tempObjv[1]); + Tcl_ResetResult(interp); + return code; +} + +/* + *---------------------------------------------------------------------- + * + * TclSetBgErrorHandler -- + * + * This function sets the command prefix to be used to handle background + * errors in interp. + * + * Results: + * None. + * + * Side effects: + * Error handler is registered. + * + *---------------------------------------------------------------------- + */ + +void +TclSetBgErrorHandler( + Tcl_Interp *interp, + Tcl_Obj *cmdPrefix) +{ + ErrAssocData *assocPtr = Tcl_GetAssocData(interp, "tclBgError", NULL); + + if (cmdPrefix == NULL) { + Tcl_Panic("TclSetBgErrorHandler: NULL cmdPrefix argument"); + } + if (assocPtr == NULL) { + /* + * First access: initialize. + */ + + assocPtr = ckalloc(sizeof(ErrAssocData)); + assocPtr->interp = interp; + assocPtr->cmdPrefix = NULL; + assocPtr->firstBgPtr = NULL; + assocPtr->lastBgPtr = NULL; + Tcl_SetAssocData(interp, "tclBgError", BgErrorDeleteProc, assocPtr); + } + if (assocPtr->cmdPrefix) { + Tcl_DecrRefCount(assocPtr->cmdPrefix); + } + assocPtr->cmdPrefix = cmdPrefix; + Tcl_IncrRefCount(assocPtr->cmdPrefix); +} + +/* + *---------------------------------------------------------------------- + * + * TclGetBgErrorHandler -- + * + * This function retrieves the command prefix currently used to handle + * background errors in interp. + * + * Results: + * A (Tcl_Obj *) to a list of words (command prefix). + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +Tcl_Obj * +TclGetBgErrorHandler( + Tcl_Interp *interp) +{ + ErrAssocData *assocPtr = Tcl_GetAssocData(interp, "tclBgError", NULL); + + if (assocPtr == NULL) { + Tcl_Obj *bgerrorObj; + + TclNewLiteralStringObj(bgerrorObj, "::tcl::Bgerror"); + TclSetBgErrorHandler(interp, bgerrorObj); + assocPtr = Tcl_GetAssocData(interp, "tclBgError", NULL); + } + return assocPtr->cmdPrefix; } /* @@ -351,39 +576,38 @@ doneWithInterp: * * BgErrorDeleteProc -- * - * This procedure is associated with the "tclBgError" assoc data - * for an interpreter; it is invoked when the interpreter is - * deleted in order to free the information assoicated with any - * pending error reports. + * This function is associated with the "tclBgError" assoc data for an + * interpreter; it is invoked when the interpreter is deleted in order to + * free the information assoicated with any pending error reports. * * Results: * None. * * Side effects: - * Background error information is freed: if there were any - * pending error reports, they are cancelled. + * Background error information is freed: if there were any pending error + * reports, they are canceled. * *---------------------------------------------------------------------- */ static void -BgErrorDeleteProc(clientData, interp) - ClientData clientData; /* Pointer to ErrAssocData structure. */ - Tcl_Interp *interp; /* Interpreter being deleted. */ +BgErrorDeleteProc( + ClientData clientData, /* Pointer to ErrAssocData structure. */ + Tcl_Interp *interp) /* Interpreter being deleted. */ { - ErrAssocData *assocPtr = (ErrAssocData *) clientData; + ErrAssocData *assocPtr = clientData; BgError *errPtr; while (assocPtr->firstBgPtr != NULL) { errPtr = assocPtr->firstBgPtr; assocPtr->firstBgPtr = errPtr->nextPtr; - ckfree(errPtr->errorMsg); - ckfree(errPtr->errorInfo); - ckfree(errPtr->errorCode); - ckfree((char *) errPtr); + Tcl_DecrRefCount(errPtr->errorMsg); + Tcl_DecrRefCount(errPtr->returnOpts); + ckfree(errPtr); } - Tcl_CancelIdleCall(HandleBgErrors, (ClientData) assocPtr); - Tcl_EventuallyFree((ClientData) assocPtr, TCL_DYNAMIC); + Tcl_CancelIdleCall(HandleBgErrors, assocPtr); + Tcl_DecrRefCount(assocPtr->cmdPrefix); + Tcl_EventuallyFree(assocPtr, TCL_DYNAMIC); } /* @@ -391,27 +615,26 @@ BgErrorDeleteProc(clientData, interp) * * Tcl_CreateExitHandler -- * - * Arrange for a given procedure to be invoked just before the - * application exits. + * Arrange for a given function to be invoked just before the application + * exits. * * Results: * None. * * Side effects: - * Proc will be invoked with clientData as argument when the - * application exits. + * Proc will be invoked with clientData as argument when the application + * exits. * *---------------------------------------------------------------------- */ void -Tcl_CreateExitHandler(proc, clientData) - Tcl_ExitProc *proc; /* Procedure to invoke. */ - ClientData clientData; /* Arbitrary value to pass to proc. */ +Tcl_CreateExitHandler( + Tcl_ExitProc *proc, /* Function to invoke. */ + ClientData clientData) /* Arbitrary value to pass to proc. */ { - ExitHandler *exitPtr; + ExitHandler *exitPtr = ckalloc(sizeof(ExitHandler)); - exitPtr = (ExitHandler *) ckalloc(sizeof(ExitHandler)); exitPtr->proc = proc; exitPtr->clientData = clientData; Tcl_MutexLock(&exitMutex); @@ -423,26 +646,58 @@ Tcl_CreateExitHandler(proc, clientData) /* *---------------------------------------------------------------------- * + * TclCreateLateExitHandler -- + * + * Arrange for a given function to be invoked after all pre-thread + * cleanups. + * + * Results: + * None. + * + * Side effects: + * Proc will be invoked with clientData as argument when the application + * exits. + * + *---------------------------------------------------------------------- + */ + +void +TclCreateLateExitHandler( + Tcl_ExitProc *proc, /* Function to invoke. */ + ClientData clientData) /* Arbitrary value to pass to proc. */ +{ + ExitHandler *exitPtr = ckalloc(sizeof(ExitHandler)); + + exitPtr->proc = proc; + exitPtr->clientData = clientData; + Tcl_MutexLock(&exitMutex); + exitPtr->nextPtr = firstLateExitPtr; + firstLateExitPtr = exitPtr; + Tcl_MutexUnlock(&exitMutex); +} + +/* + *---------------------------------------------------------------------- + * * Tcl_DeleteExitHandler -- * - * This procedure cancels an existing exit handler matching proc - * and clientData, if such a handler exits. + * This function cancels an existing exit handler matching proc and + * clientData, if such a handler exits. * * Results: * None. * * Side effects: - * If there is an exit handler corresponding to proc and clientData - * then it is cancelled; if no such handler exists then nothing - * happens. + * If there is an exit handler corresponding to proc and clientData then + * it is canceled; if no such handler exists then nothing happens. * *---------------------------------------------------------------------- */ void -Tcl_DeleteExitHandler(proc, clientData) - Tcl_ExitProc *proc; /* Procedure that was previously registered. */ - ClientData clientData; /* Arbitrary value to pass to proc. */ +Tcl_DeleteExitHandler( + Tcl_ExitProc *proc, /* Function that was previously registered. */ + ClientData clientData) /* Arbitrary value to pass to proc. */ { ExitHandler *exitPtr, *prevPtr; @@ -456,7 +711,50 @@ Tcl_DeleteExitHandler(proc, clientData) } else { prevPtr->nextPtr = exitPtr->nextPtr; } - ckfree((char *) exitPtr); + ckfree(exitPtr); + break; + } + } + Tcl_MutexUnlock(&exitMutex); + return; +} + +/* + *---------------------------------------------------------------------- + * + * TclDeleteLateExitHandler -- + * + * This function cancels an existing late exit handler matching proc and + * clientData, if such a handler exits. + * + * Results: + * None. + * + * Side effects: + * If there is a late exit handler corresponding to proc and clientData + * then it is canceled; if no such handler exists then nothing happens. + * + *---------------------------------------------------------------------- + */ + +void +TclDeleteLateExitHandler( + Tcl_ExitProc *proc, /* Function that was previously registered. */ + ClientData clientData) /* Arbitrary value to pass to proc. */ +{ + ExitHandler *exitPtr, *prevPtr; + + Tcl_MutexLock(&exitMutex); + for (prevPtr = NULL, exitPtr = firstLateExitPtr; exitPtr != NULL; + prevPtr = exitPtr, exitPtr = exitPtr->nextPtr) { + if ((exitPtr->proc == proc) + && (exitPtr->clientData == clientData)) { + if (prevPtr == NULL) { + firstLateExitPtr = exitPtr->nextPtr; + } else { + prevPtr->nextPtr = exitPtr->nextPtr; + } + ckfree(exitPtr); break; } } @@ -469,28 +767,28 @@ Tcl_DeleteExitHandler(proc, clientData) * * Tcl_CreateThreadExitHandler -- * - * Arrange for a given procedure to be invoked just before the - * current thread exits. + * Arrange for a given function to be invoked just before the current + * thread exits. * * Results: * None. * * Side effects: - * Proc will be invoked with clientData as argument when the - * application exits. + * Proc will be invoked with clientData as argument when the application + * exits. * *---------------------------------------------------------------------- */ void -Tcl_CreateThreadExitHandler(proc, clientData) - Tcl_ExitProc *proc; /* Procedure to invoke. */ - ClientData clientData; /* Arbitrary value to pass to proc. */ +Tcl_CreateThreadExitHandler( + Tcl_ExitProc *proc, /* Function to invoke. */ + ClientData clientData) /* Arbitrary value to pass to proc. */ { ExitHandler *exitPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); - exitPtr = (ExitHandler *) ckalloc(sizeof(ExitHandler)); + exitPtr = ckalloc(sizeof(ExitHandler)); exitPtr->proc = proc; exitPtr->clientData = clientData; exitPtr->nextPtr = tsdPtr->firstExitPtr; @@ -502,24 +800,23 @@ Tcl_CreateThreadExitHandler(proc, clientData) * * Tcl_DeleteThreadExitHandler -- * - * This procedure cancels an existing exit handler matching proc - * and clientData, if such a handler exits. + * This function cancels an existing exit handler matching proc and + * clientData, if such a handler exits. * * Results: * None. * * Side effects: - * If there is an exit handler corresponding to proc and clientData - * then it is cancelled; if no such handler exists then nothing - * happens. + * If there is an exit handler corresponding to proc and clientData then + * it is canceled; if no such handler exists then nothing happens. * *---------------------------------------------------------------------- */ void -Tcl_DeleteThreadExitHandler(proc, clientData) - Tcl_ExitProc *proc; /* Procedure that was previously registered. */ - ClientData clientData; /* Arbitrary value to pass to proc. */ +Tcl_DeleteThreadExitHandler( + Tcl_ExitProc *proc, /* Function that was previously registered. */ + ClientData clientData) /* Arbitrary value to pass to proc. */ { ExitHandler *exitPtr, *prevPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); @@ -533,7 +830,7 @@ Tcl_DeleteThreadExitHandler(proc, clientData) } else { prevPtr->nextPtr = exitPtr->nextPtr; } - ckfree((char *) exitPtr); + ckfree(exitPtr); return; } } @@ -542,106 +839,155 @@ Tcl_DeleteThreadExitHandler(proc, clientData) /* *---------------------------------------------------------------------- * - * Tcl_Exit -- + * Tcl_SetExitProc -- * - * This procedure is called to terminate the application. + * This function sets the application wide exit handler that will be + * called by Tcl_Exit in place of the C-runtime exit. If the application + * wide exit handler is NULL, the C-runtime exit will be used instead. * * Results: - * None. + * The previously set application wide exit handler. * * Side effects: - * All existing exit handlers are invoked, then the application - * ends. + * Sets the application wide exit handler to the specified value. * *---------------------------------------------------------------------- */ -void -Tcl_Exit(status) - int status; /* Exit status for application; typically - * 0 for normal return, 1 for error return. */ +Tcl_ExitProc * +Tcl_SetExitProc( + Tcl_ExitProc *proc) /* New exit handler for app or NULL */ { - Tcl_Finalize(); - TclpExit(status); + Tcl_ExitProc *prevExitProc; + + /* + * Swap the old exit proc for the new one, saving the old one for our + * return value. + */ + + Tcl_MutexLock(&exitMutex); + prevExitProc = appExitPtr; + appExitPtr = proc; + Tcl_MutexUnlock(&exitMutex); + + return prevExitProc; } + /* - *------------------------------------------------------------------------- - * - * TclSetLibraryPath -- + *---------------------------------------------------------------------- * - * Set the path that will be used for searching for init.tcl and - * encodings when an interp is being created. + * InvokeExitHandlers -- + * + * Call the registered exit handlers. * * Results: * None. * * Side effects: - * Changing the library path will affect what directories are - * examined when looking for encodings for all interps from that - * point forward. - * - * The refcount of the new library path is incremented and the - * refcount of the old path is decremented. + * The exit handlers are invoked, and the ExitHandler struct is + * freed. * - *------------------------------------------------------------------------- + *---------------------------------------------------------------------- */ - -void -TclSetLibraryPath(pathPtr) - Tcl_Obj *pathPtr; /* A Tcl list object whose elements are - * the new library path. */ +static void +InvokeExitHandlers(void) { - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); + ExitHandler *exitPtr; - if (pathPtr != NULL) { - Tcl_IncrRefCount(pathPtr); - } - if (tsdPtr->tclLibraryPath != NULL) { - Tcl_DecrRefCount(tsdPtr->tclLibraryPath); - } - tsdPtr->tclLibraryPath = pathPtr; + Tcl_MutexLock(&exitMutex); + inExit = 1; - /* - * No mutex locking is needed here as up the stack we're within - * TclpInitLock(). - */ - tclLibraryPathStr = Tcl_GetStringFromObj(pathPtr, NULL); + for (exitPtr = firstExitPtr; exitPtr != NULL; exitPtr = firstExitPtr) { + /* + * Be careful to remove the handler from the list before invoking its + * callback. This protects us against double-freeing if the callback + * should call Tcl_DeleteExitHandler on itself. + */ + + firstExitPtr = exitPtr->nextPtr; + Tcl_MutexUnlock(&exitMutex); + exitPtr->proc(exitPtr->clientData); + ckfree(exitPtr); + Tcl_MutexLock(&exitMutex); + } + firstExitPtr = NULL; + Tcl_MutexUnlock(&exitMutex); } + /* - *------------------------------------------------------------------------- + *---------------------------------------------------------------------- * - * TclGetLibraryPath -- + * Tcl_Exit -- * - * Return a Tcl list object whose elements are the library path. - * The caller should not modify the contents of the returned object. + * This function is called to terminate the application. * * Results: - * As above. + * None. * * Side effects: - * None. + * All existing exit handlers are invoked, then the application ends. * - *------------------------------------------------------------------------- + *---------------------------------------------------------------------- */ -Tcl_Obj * -TclGetLibraryPath() +void +Tcl_Exit( + int status) /* Exit status for application; typically 0 + * for normal return, 1 for error return. */ { - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); + Tcl_ExitProc *currentAppExitPtr; - if (tsdPtr->tclLibraryPath == NULL) { + Tcl_MutexLock(&exitMutex); + currentAppExitPtr = appExitPtr; + Tcl_MutexUnlock(&exitMutex); + + if (currentAppExitPtr) { /* - * Grab the shared string and place it into a new thread specific - * Tcl_Obj. + * Warning: this code SHOULD NOT return, as there is code that depends + * on Tcl_Exit never returning. In fact, we will Tcl_Panic if anyone + * returns, so critical is this dependcy. */ - tsdPtr->tclLibraryPath = Tcl_NewStringObj(tclLibraryPathStr, -1); - /* take ownership */ - Tcl_IncrRefCount(tsdPtr->tclLibraryPath); + currentAppExitPtr(INT2PTR(status)); + Tcl_Panic("AppExitProc returned unexpectedly"); + } else { + + if (TclFullFinalizationRequested()) { + + /* + * Thorough finalization for Valgrind et al. + */ + + Tcl_Finalize(); + + } else { + + /* + * Fast and deterministic exit (default behavior) + */ + + InvokeExitHandlers(); + + /* + * Ensure the thread-specific data is initialised as it is used in + * Tcl_FinalizeThread() + */ + + (void) TCL_TSD_INIT(&dataKey); + + /* + * Now finalize the calling thread only (others are not safely + * reachable). Among other things, this triggers a flush of the + * Tcl_Channels that may have data enqueued. + */ + + Tcl_FinalizeThread(); + } + TclpExit(status); + Tcl_Panic("OS exit failed!"); } - return tsdPtr->tclLibraryPath; } /* @@ -649,17 +995,16 @@ TclGetLibraryPath() * * TclInitSubsystems -- * - * Initialize various subsytems in Tcl. This should be called the - * first time an interp is created, or before any of the subsystems - * are used. This function ensures an order for the initialization - * of subsystems: + * Initialize various subsytems in Tcl. This should be called the first + * time an interp is created, or before any of the subsystems are used. + * This function ensures an order for the initialization of subsystems: * - * 1. that cannot be initialized in lazy order because they are - * mutually dependent. + * 1. that cannot be initialized in lazy order because they are mutually + * dependent. * - * 2. so that they can be finalized in a known order w/o causing - * the subsequent re-initialization of a subsystem in the act of - * shutting down another. + * 2. so that they can be finalized in a known order w/o causing the + * subsequent re-initialization of a subsystem in the act of shutting + * down another. * * Results: * None. @@ -671,73 +1016,50 @@ TclGetLibraryPath() */ void -TclInitSubsystems(argv0) - CONST char *argv0; /* Name of executable from argv[0] to main() - * in native multi-byte encoding. */ +TclInitSubsystems(void) { - ThreadSpecificData *tsdPtr; - - if (inFinalize != 0) { - panic("TclInitSubsystems called while finalizing"); + if (inExit != 0) { + Tcl_Panic("TclInitSubsystems called while exiting"); } - /* - * Grab the thread local storage pointer before doing anything because - * the initialization routines will be registering exit handlers. - * We use this pointer to detect if this is the first time this - * thread has created an interpreter. - */ - - tsdPtr = (ThreadSpecificData *) TclThreadDataKeyGet(&dataKey); - if (subsystemsInitialized == 0) { - /* - * Double check inside the mutex. There are definitly calls - * back into this routine from some of the procedures below. + /* + * Double check inside the mutex. There are definitly calls back into + * this routine from some of the functions below. */ TclpInitLock(); if (subsystemsInitialized == 0) { - /* - * Have to set this bit here to avoid deadlock with the - * routines below us that call into TclInitSubsystems. - */ - subsystemsInitialized = 1; - - tclExecutableName = NULL; - - /* + /* * Initialize locks used by the memory allocators before anything * interesting happens so we can use the allocators in the * implementation of self-initializing locks. */ + + TclInitThreadStorage(); /* Creates master hash table for + * thread local storage */ #if USE_TCLALLOC - TclInitAlloc(); /* process wide mutex init */ + TclInitAlloc(); /* Process wide mutex init */ #endif #ifdef TCL_MEM_DEBUG - TclInitDbCkalloc(); /* process wide mutex init */ + TclInitDbCkalloc(); /* Process wide mutex init */ #endif - TclpInitPlatform(); /* creates signal handler(s) */ - TclInitObjSubsystem(); /* register obj types, create mutexes */ - TclInitIOSubsystem(); /* inits a tsd key (noop) */ - TclInitEncodingSubsystem(); /* process wide encoding init */ - TclInitNamespaceSubsystem(); /* register ns obj type (mutexed) */ + TclpInitPlatform(); /* Creates signal handler(s) */ + TclInitDoubleConversion(); /* Initializes constants for + * converting to/from double. */ + TclInitObjSubsystem(); /* Register obj types, create + * mutexes. */ + TclInitIOSubsystem(); /* Inits a tsd key (noop). */ + TclInitEncodingSubsystem(); /* Process wide encoding init. */ + TclpSetInterfaces(); + TclInitNamespaceSubsystem();/* Register ns obj type (mutexed). */ + subsystemsInitialized = 1; } TclpInitUnlock(); } - - if (tsdPtr == NULL) { - /* - * First time this thread has created an interpreter. - * We fetch the key again just in case no exit handlers were - * registered by this point. - */ - - (void) TCL_TSD_INIT(&dataKey); - TclInitNotifier(); - } + TclInitNotifier(); } /* @@ -745,10 +1067,9 @@ TclInitSubsystems(argv0) * * Tcl_Finalize -- * - * Shut down Tcl. First calls registered exit handlers, then - * carefully shuts down various subsystems. - * Called by Tcl_Exit or when the Tcl shared library is being - * unloaded. + * Shut down Tcl. First calls registered exit handlers, then carefully + * shuts down various subsystems. Should be invoked by user before the + * Tcl shared library is being unloaded in an embedded context. * * Results: * None. @@ -760,98 +1081,172 @@ TclInitSubsystems(argv0) */ void -Tcl_Finalize() +Tcl_Finalize(void) { ExitHandler *exitPtr; - ThreadSpecificData *tsdPtr; + + /* + * Invoke exit handlers first. + */ + + InvokeExitHandlers(); TclpInitLock(); - if (subsystemsInitialized != 0) { - subsystemsInitialized = 0; + if (subsystemsInitialized == 0) { + goto alreadyFinalized; + } + subsystemsInitialized = 0; - tsdPtr = TCL_TSD_INIT(&dataKey); + /* + * Ensure the thread-specific data is initialised as it is used in + * Tcl_FinalizeThread() + */ + + (void) TCL_TSD_INIT(&dataKey); + /* + * Clean up after the current thread now, after exit handlers. In + * particular, the testexithandler command sets up something that writes + * to standard output, which gets closed. Note that there is no + * thread-local storage or IO subsystem after this call. + */ + + Tcl_FinalizeThread(); + + /* + * Now invoke late (process-wide) exit handlers. + */ + + Tcl_MutexLock(&exitMutex); + for (exitPtr = firstLateExitPtr; exitPtr != NULL; + exitPtr = firstLateExitPtr) { /* - * Invoke exit handlers first. + * Be careful to remove the handler from the list before invoking its + * callback. This protects us against double-freeing if the callback + * should call Tcl_DeleteLateExitHandler on itself. */ + firstLateExitPtr = exitPtr->nextPtr; + Tcl_MutexUnlock(&exitMutex); + exitPtr->proc(exitPtr->clientData); + ckfree(exitPtr); Tcl_MutexLock(&exitMutex); - inFinalize = 1; - for (exitPtr = firstExitPtr; exitPtr != NULL; exitPtr = firstExitPtr) { - /* - * Be careful to remove the handler from the list before - * invoking its callback. This protects us against - * double-freeing if the callback should call - * Tcl_DeleteExitHandler on itself. - */ + } + firstLateExitPtr = NULL; + Tcl_MutexUnlock(&exitMutex); - firstExitPtr = exitPtr->nextPtr; - Tcl_MutexUnlock(&exitMutex); - (*exitPtr->proc)(exitPtr->clientData); - ckfree((char *) exitPtr); - Tcl_MutexLock(&exitMutex); - } - firstExitPtr = NULL; - Tcl_MutexUnlock(&exitMutex); + /* + * Now finalize the Tcl execution environment. Note that this must be done + * after the exit handlers, because there are order dependencies. + */ - /* - * Clean up after the current thread now, after exit handlers. - * In particular, the testexithandler command sets up something - * that writes to standard output, which gets closed. - * Note that there is no thread-local storage after this call. - */ + TclFinalizeEvaluation(); + TclFinalizeExecution(); + TclFinalizeEnvironment(); - Tcl_FinalizeThread(); + /* + * Finalizing the filesystem must come after anything which might + * conceivably interact with the 'Tcl_FS' API. + */ - /* - * Now finalize the Tcl execution environment. Note that this - * must be done after the exit handlers, because there are - * order dependencies. - */ + TclFinalizeFilesystem(); - TclFinalizeCompExecEnv(); - TclFinalizeEnvironment(); + /* + * Undo all Tcl_ObjType registrations, and reset the master list of free + * Tcl_Obj's. After this returns, no more Tcl_Obj's should be allocated or + * freed. + * + * Note in particular that TclFinalizeObjects() must follow + * TclFinalizeFilesystem() because TclFinalizeFilesystem free's the + * Tcl_Obj that holds the path of the current working directory. + */ - TclFinalizeEncodingSubsystem(); + TclFinalizeObjects(); - if (tclExecutableName != NULL) { - ckfree(tclExecutableName); - tclExecutableName = NULL; - } - if (tclNativeExecutableName != NULL) { - ckfree(tclNativeExecutableName); - tclNativeExecutableName = NULL; - } - if (tclDefaultEncodingDir != NULL) { - ckfree(tclDefaultEncodingDir); - tclDefaultEncodingDir = NULL; - } - - Tcl_SetPanicProc(NULL); + /* + * We must be sure the encoding finalization doesn't need to examine the + * filesystem in any way. Since it only needs to clean up internal data + * structures, this is fine. + */ - /* - * Free synchronization objects. There really should only be one - * thread alive at this moment. - */ + TclFinalizeEncodingSubsystem(); - TclFinalizeSynchronization(); + /* + * Repeat finalization of the thread local storage once more. Although + * this step is already done by the Tcl_FinalizeThread call above, series + * of events happening afterwards may re-initialize TSD slots. Those need + * to be finalized again, otherwise we're leaking memory chunks. Very + * important to note is that things happening afterwards should not + * reference anything which may re-initialize TSD's. This includes freeing + * Tcl_Objs's, among other things. + * + * This fixes the Tcl Bug #990552. + */ - /* - * We defer unloading of packages until very late - * to avoid memory access issues. Both exit callbacks and - * synchronization variables may be stored in packages. - */ + TclFinalizeThreadData(); + + /* + * Now we can free constants for conversions to/from double. + */ - TclFinalizeLoad(); + TclFinalizeDoubleConversion(); - /* - * There shouldn't be any malloc'ed memory after this. - */ + /* + * There have been several bugs in the past that cause exit handlers to be + * established during Tcl_Finalize processing. Such exit handlers leave + * malloc'ed memory, and Tcl_FinalizeMemorySubsystem or + * Tcl_FinalizeThreadAlloc will result in a corrupted heap. The result can + * be a mysterious crash on process exit. Check here that nobody's done + * this. + */ - TclFinalizeMemorySubsystem(); - inFinalize = 0; + if (firstExitPtr != NULL) { + Tcl_Panic("exit handlers were created during Tcl_Finalize"); } - TclpInitUnlock(); + + TclFinalizePreserve(); + + /* + * Free synchronization objects. There really should only be one thread + * alive at this moment. + */ + + TclFinalizeSynchronization(); + + /* + * Close down the thread-specific object allocator. + */ + +#if defined(TCL_THREADS) && defined(USE_THREAD_ALLOC) + TclFinalizeThreadAlloc(); +#endif + + /* + * We defer unloading of packages until very late to avoid memory access + * issues. Both exit callbacks and synchronization variables may be stored + * in packages. + * + * Note that TclFinalizeLoad unloads packages in the reverse of the order + * they were loaded in (i.e. last to be loaded is the first to be + * unloaded). This can be important for correct unloading when + * dependencies exist. + * + * Once load has been finalized, we will have deleted any temporary copies + * of shared libraries and can therefore reset the filesystem to its + * original state. + */ + + TclFinalizeLoad(); + TclResetFilesystem(); + + /* + * At this point, there should no longer be any ckalloc'ed memory. + */ + + TclFinalizeMemorySubsystem(); + + alreadyFinalized: + TclFinalizeLock(); } /* @@ -859,8 +1254,8 @@ Tcl_Finalize() * * Tcl_FinalizeThread -- * - * Runs the exit handlers to allow Tcl to clean up its state - * about a particular thread. + * Runs the exit handlers to allow Tcl to clean up its state about a + * particular thread. * * Results: * None. @@ -872,51 +1267,50 @@ Tcl_Finalize() */ void -Tcl_FinalizeThread() +Tcl_FinalizeThread(void) { ExitHandler *exitPtr; - ThreadSpecificData *tsdPtr = - (ThreadSpecificData *)TclThreadDataKeyGet(&dataKey); + ThreadSpecificData *tsdPtr; - if (tsdPtr != NULL) { - /* - * Invoke thread exit handlers first. - */ + /* + * We use TclThreadDataKeyGet here, rather than Tcl_GetThreadData, because + * we don't want to initialize the data block if it hasn't been + * initialized already. + */ + tsdPtr = TclThreadDataKeyGet(&dataKey); + if (tsdPtr != NULL) { tsdPtr->inExit = 1; - /* - * Clean up the library path now, before we invalidate thread-local - * storage or calling thread exit handlers. - */ - - if (tsdPtr->tclLibraryPath != NULL) { - Tcl_DecrRefCount(tsdPtr->tclLibraryPath); - tsdPtr->tclLibraryPath = NULL; - } - for (exitPtr = tsdPtr->firstExitPtr; exitPtr != NULL; exitPtr = tsdPtr->firstExitPtr) { /* * Be careful to remove the handler from the list before invoking - * its callback. This protects us against double-freeing if the + * its callback. This protects us against double-freeing if the * callback should call Tcl_DeleteThreadExitHandler on itself. */ tsdPtr->firstExitPtr = exitPtr->nextPtr; - (*exitPtr->proc)(exitPtr->clientData); - ckfree((char *) exitPtr); + exitPtr->proc(exitPtr->clientData); + ckfree(exitPtr); } TclFinalizeIOSubsystem(); TclFinalizeNotifier(); TclFinalizeAsync(); + TclFinalizeThreadObjects(); + } - /* - * Blow away all thread local storage blocks. - */ + /* + * Blow away all thread local storage blocks. + * + * Note that Tcl API allows creation of threads which do not use any Tcl + * interp or other Tcl subsytems. Those threads might, however, use thread + * local storage, so we must unconditionally finalize it. + * + * Fix [Bug #571002] + */ - TclFinalizeThreadData(); - } + TclFinalizeThreadData(); } /* @@ -936,15 +1330,36 @@ Tcl_FinalizeThread() */ int -TclInExit() +TclInExit(void) { - ThreadSpecificData *tsdPtr = (ThreadSpecificData *) - TclThreadDataKeyGet(&dataKey); + return inExit; +} + +/* + *---------------------------------------------------------------------- + * + * TclInThreadExit -- + * + * Determines if we are in the middle of thread exit-time cleanup. + * + * Results: + * If we are in the middle of exiting this thread, 1, otherwise 0. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +int +TclInThreadExit(void) +{ + ThreadSpecificData *tsdPtr = TclThreadDataKeyGet(&dataKey); + if (tsdPtr == NULL) { - return inFinalize; - } else { - return tsdPtr->inExit; + return 0; } + return tsdPtr->inExit; } /* @@ -952,8 +1367,8 @@ TclInExit() * * Tcl_VwaitObjCmd -- * - * This procedure is invoked to process the "vwait" Tcl command. - * See the user documentation for details on what it does. + * This function is invoked to process the "vwait" Tcl command. See the + * user documentation for details on what it does. * * Results: * A standard Tcl result. @@ -966,61 +1381,81 @@ TclInExit() /* ARGSUSED */ int -Tcl_VwaitObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; /* Current interpreter. */ - int objc; /* Number of arguments. */ - Tcl_Obj *CONST objv[]; /* Argument objects. */ +Tcl_VwaitObjCmd( + ClientData clientData, /* Not used. */ + Tcl_Interp *interp, /* Current interpreter. */ + int objc, /* Number of arguments. */ + Tcl_Obj *const objv[]) /* Argument objects. */ { int done, foundEvent; - char *nameString; + const char *nameString; if (objc != 2) { - Tcl_WrongNumArgs(interp, 1, objv, "name"); + Tcl_WrongNumArgs(interp, 1, objv, "name"); return TCL_ERROR; } nameString = Tcl_GetString(objv[1]); - if (Tcl_TraceVar(interp, nameString, + if (Tcl_TraceVar2(interp, nameString, NULL, TCL_GLOBAL_ONLY|TCL_TRACE_WRITES|TCL_TRACE_UNSETS, - VwaitVarProc, (ClientData) &done) != TCL_OK) { + VwaitVarProc, &done) != TCL_OK) { return TCL_ERROR; }; done = 0; foundEvent = 1; while (!done && foundEvent) { foundEvent = Tcl_DoOneEvent(TCL_ALL_EVENTS); + if (Tcl_Canceled(interp, TCL_LEAVE_ERR_MSG) == TCL_ERROR) { + break; + } + if (Tcl_LimitExceeded(interp)) { + Tcl_ResetResult(interp); + Tcl_SetObjResult(interp, Tcl_NewStringObj("limit exceeded", -1)); + break; + } } - Tcl_UntraceVar(interp, nameString, + Tcl_UntraceVar2(interp, nameString, NULL, TCL_GLOBAL_ONLY|TCL_TRACE_WRITES|TCL_TRACE_UNSETS, - VwaitVarProc, (ClientData) &done); + VwaitVarProc, &done); + + if (!foundEvent) { + Tcl_ResetResult(interp); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "can't wait for variable \"%s\": would wait forever", + nameString)); + Tcl_SetErrorCode(interp, "TCL", "EVENT", "NO_SOURCES", NULL); + return TCL_ERROR; + } + if (!done) { + /* + * The interpreter's result was already set to the right error message + * prior to exiting the loop above. + */ + + return TCL_ERROR; + } /* - * Clear out the interpreter's result, since it may have been set - * by event handlers. + * Clear out the interpreter's result, since it may have been set by event + * handlers. */ Tcl_ResetResult(interp); - if (!foundEvent) { - Tcl_AppendResult(interp, "can't wait for variable \"", nameString, - "\": would wait forever", (char *) NULL); - return TCL_ERROR; - } return TCL_OK; } /* ARGSUSED */ static char * -VwaitVarProc(clientData, interp, name1, name2, flags) - ClientData clientData; /* Pointer to integer to set to 1. */ - Tcl_Interp *interp; /* Interpreter containing variable. */ - char *name1; /* Name of variable. */ - char *name2; /* Second part of variable name. */ - int flags; /* Information about what happened. */ +VwaitVarProc( + ClientData clientData, /* Pointer to integer to set to 1. */ + Tcl_Interp *interp, /* Interpreter containing variable. */ + const char *name1, /* Name of variable. */ + const char *name2, /* Second part of variable name. */ + int flags) /* Information about what happened. */ { - int *donePtr = (int *) clientData; + int *donePtr = clientData; *donePtr = 1; - return (char *) NULL; + return NULL; } /* @@ -1028,8 +1463,8 @@ VwaitVarProc(clientData, interp, name1, name2, flags) * * Tcl_UpdateObjCmd -- * - * This procedure is invoked to process the "update" Tcl command. - * See the user documentation for details on what it does. + * This function is invoked to process the "update" Tcl command. See the + * user documentation for details on what it does. * * Results: * A standard Tcl result. @@ -1042,16 +1477,16 @@ VwaitVarProc(clientData, interp, name1, name2, flags) /* ARGSUSED */ int -Tcl_UpdateObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; /* Current interpreter. */ - int objc; /* Number of arguments. */ - Tcl_Obj *CONST objv[]; /* Argument objects. */ +Tcl_UpdateObjCmd( + ClientData clientData, /* Not used. */ + Tcl_Interp *interp, /* Current interpreter. */ + int objc, /* Number of arguments. */ + Tcl_Obj *const objv[]) /* Argument objects. */ { int optionIndex; int flags = 0; /* Initialized to avoid compiler warning. */ - static CONST char *updateOptions[] = {"idletasks", (char *) NULL}; - enum updateOptions {REGEXP_IDLETASKS}; + static const char *const updateOptions[] = {"idletasks", NULL}; + enum updateOptions {OPT_IDLETASKS}; if (objc == 1) { flags = TCL_ALL_EVENTS|TCL_DONT_WAIT; @@ -1061,28 +1496,120 @@ Tcl_UpdateObjCmd(clientData, interp, objc, objv) return TCL_ERROR; } switch ((enum updateOptions) optionIndex) { - case REGEXP_IDLETASKS: { - flags = TCL_WINDOW_EVENTS|TCL_IDLE_EVENTS|TCL_DONT_WAIT; - break; - } - default: { - panic("Tcl_UpdateObjCmd: bad option index to UpdateOptions"); - } + case OPT_IDLETASKS: + flags = TCL_WINDOW_EVENTS|TCL_IDLE_EVENTS|TCL_DONT_WAIT; + break; + default: + Tcl_Panic("Tcl_UpdateObjCmd: bad option index to UpdateOptions"); } } else { - Tcl_WrongNumArgs(interp, 1, objv, "?idletasks?"); + Tcl_WrongNumArgs(interp, 1, objv, "?idletasks?"); return TCL_ERROR; } - + while (Tcl_DoOneEvent(flags) != 0) { - /* Empty loop body */ + if (Tcl_Canceled(interp, TCL_LEAVE_ERR_MSG) == TCL_ERROR) { + return TCL_ERROR; + } + if (Tcl_LimitExceeded(interp)) { + Tcl_ResetResult(interp); + Tcl_SetObjResult(interp, Tcl_NewStringObj("limit exceeded", -1)); + return TCL_ERROR; + } } /* - * Must clear the interpreter's result because event handlers could - * have executed commands. + * Must clear the interpreter's result because event handlers could have + * executed commands. */ Tcl_ResetResult(interp); return TCL_OK; } + +#ifdef TCL_THREADS +/* + *---------------------------------------------------------------------- + * + * NewThreadProc -- + * + * Bootstrap function of a new Tcl thread. + * + * Results: + * None. + * + * Side Effects: + * Initializes Tcl notifier for the current thread. + * + *---------------------------------------------------------------------- + */ + +static Tcl_ThreadCreateType +NewThreadProc( + ClientData clientData) +{ + ThreadClientData *cdPtr = clientData; + ClientData threadClientData; + Tcl_ThreadCreateProc *threadProc; + + threadProc = cdPtr->proc; + threadClientData = cdPtr->clientData; + ckfree(clientData); /* Allocated in Tcl_CreateThread() */ + + threadProc(threadClientData); + + TCL_THREAD_CREATE_RETURN; +} +#endif + +/* + *---------------------------------------------------------------------- + * + * Tcl_CreateThread -- + * + * This function creates a new thread. This actually belongs to the + * tclThread.c file but since we use some private data structures local + * to this file, it is placed here. + * + * Results: + * TCL_OK if the thread could be created. The thread ID is returned in a + * parameter. + * + * Side effects: + * A new thread is created. + * + *---------------------------------------------------------------------- + */ + +int +Tcl_CreateThread( + Tcl_ThreadId *idPtr, /* Return, the ID of the thread */ + Tcl_ThreadCreateProc *proc, /* Main() function of the thread */ + ClientData clientData, /* The one argument to Main() */ + int stackSize, /* Size of stack for the new thread */ + int flags) /* Flags controlling behaviour of the new + * thread. */ +{ +#ifdef TCL_THREADS + ThreadClientData *cdPtr = ckalloc(sizeof(ThreadClientData)); + int result; + + cdPtr->proc = proc; + cdPtr->clientData = clientData; + result = TclpThreadCreate(idPtr, NewThreadProc, cdPtr, stackSize, flags); + if (result != TCL_OK) { + ckfree(cdPtr); + } + return result; +#else + return TCL_ERROR; +#endif /* TCL_THREADS */ +} + +/* + * Local Variables: + * mode: c + * c-basic-offset: 4 + * fill-column: 78 + * End: + */ |