diff options
Diffstat (limited to 'generic/tclExecute.c')
-rw-r--r-- | generic/tclExecute.c | 10600 |
1 files changed, 6303 insertions, 4297 deletions
diff --git a/generic/tclExecute.c b/generic/tclExecute.c index 1ae182c..904c368 100644 --- a/generic/tclExecute.c +++ b/generic/tclExecute.c @@ -1,63 +1,46 @@ -/* +/* * tclExecute.c -- * - * This file contains procedures that execute byte-compiled Tcl - * commands. + * This file contains procedures that execute byte-compiled Tcl commands. * * Copyright (c) 1996-1997 Sun Microsystems, Inc. * Copyright (c) 1998-2000 by Scriptics Corporation. - * Copyright (c) 2001 by Kevin B. Kenny. All rights reserved. + * Copyright (c) 2001 by Kevin B. Kenny. All rights reserved. + * Copyright (c) 2002-2005 by Miguel Sofer. + * Copyright (c) 2005-2007 by Donal K. Fellows. + * Copyright (c) 2007 Daniel A. Steffen <das@users.sourceforge.net> * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclInt.h" #include "tclCompile.h" +#include "tommath.h" -#ifndef TCL_NO_MATH -# include <math.h> -#endif +#include <math.h> +#include <float.h> /* - * The stuff below is a bit of a hack so that this file can be used - * in environments that include no UNIX, i.e. no errno. Just define - * errno here. + * Hack to determine whether we may expect IEEE floating point. The hack is + * formally incorrect in that non-IEEE platforms might have the same precision + * and range, but VAX, IBM, and Cray do not; are there any other floating + * point units that we might care about? */ -#ifndef TCL_GENERIC_ONLY -# include "tclPort.h" -#else /* TCL_GENERIC_ONLY */ -# ifndef NO_FLOAT_H -# include <float.h> -# else /* NO_FLOAT_H */ -# ifndef NO_VALUES_H -# include <values.h> -# endif /* !NO_VALUES_H */ -# endif /* !NO_FLOAT_H */ -# define NO_ERRNO_H -#endif /* !TCL_GENERIC_ONLY */ - -#ifdef NO_ERRNO_H -int errno; -# define EDOM 33 -# define ERANGE 34 +#if (FLT_RADIX == 2) && (DBL_MANT_DIG == 53) && (DBL_MAX_EXP == 1024) +#define IEEE_FLOATING_POINT #endif /* - * Need DBL_MAX for IS_INF() macro... - */ -#ifndef DBL_MAX -# ifdef MAXDOUBLE -# define DBL_MAX MAXDOUBLE -# else /* !MAXDOUBLE */ -/* - * This value is from the Solaris headers, but doubles seem to be the - * same size everywhere. Long doubles aren't, but we don't use those. + * A mask (should be 2**n-1) that is used to work out when the bytecode engine + * should call Tcl_AsyncReady() to see whether there is a signal that needs + * handling. */ -# define DBL_MAX 1.79769313486231570e+308 -# endif /* MAXDOUBLE */ -#endif /* !DBL_MAX */ + +#ifndef ASYNC_CHECK_COUNT_MASK +# define ASYNC_CHECK_COUNT_MASK 63 +#endif /* !ASYNC_CHECK_COUNT_MASK */ /* * Boolean flag indicating whether the Tcl bytecode interpreter has been @@ -85,22 +68,25 @@ int tclTraceExec = 0; * Mapping from expression instruction opcodes to strings; used for error * messages. Note that these entries must match the order and number of the * expression opcodes (e.g., INST_LOR) in tclCompile.h. + * + * Does not include the string for INST_EXPON (and beyond), as that is + * disjoint for backward-compatability reasons. */ -static CONST char *CONST operatorStrings[] = { +static const char *operatorStrings[] = { "||", "&&", "|", "^", "&", "==", "!=", "<", ">", "<=", ">=", "<<", ">>", "+", "-", "*", "/", "%", "+", "-", "~", "!", "BUILTIN FUNCTION", "FUNCTION", - "", "", "", "", "", "", "", "", "eq", "ne", + "", "", "", "", "", "", "", "", "eq", "ne" }; /* * Mapping from Tcl result codes to strings; used for error and debugging - * messages. + * messages. */ #ifdef TCL_COMPILE_DEBUG -static CONST char *CONST resultStrings[] = { +static const char *resultStrings[] = { "TCL_OK", "TCL_ERROR", "TCL_RETURN", "TCL_BREAK", "TCL_CONTINUE" }; #endif @@ -111,70 +97,142 @@ static CONST char *CONST resultStrings[] = { #ifdef TCL_COMPILE_STATS long tclObjsAlloced = 0; -long tclObjsFreed = 0; -#define TCL_MAX_SHARED_OBJ_STATS 5 +long tclObjsFreed = 0; long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS] = { 0, 0, 0, 0, 0 }; #endif /* TCL_COMPILE_STATS */ /* - * Macros for testing floating-point values for certain special cases. Test - * for not-a-number by comparing a value against itself; test for infinity - * by comparing against the largest floating-point value. + * Support pre-8.5 bytecodes unless specifically requested otherwise. + */ + +#ifndef TCL_SUPPORT_84_BYTECODE +#define TCL_SUPPORT_84_BYTECODE 1 +#endif + +#if TCL_SUPPORT_84_BYTECODE +/* + * We need to know the tclBuiltinFuncTable to support translation of pre-8.5 + * math functions to the namespace-based ::tcl::mathfunc::op in 8.5+. */ -#define IS_NAN(v) ((v) != (v)) -#define IS_INF(v) (((v) > DBL_MAX) || ((v) < -DBL_MAX)) +typedef struct { + const char *name; /* Name of function. */ + int numArgs; /* Number of arguments for function. */ +} BuiltinFunc; /* - * The new macro for ending an instruction; note that a - * reasonable C-optimiser will resolve all branches - * at compile time. (result) is always a constant; the macro - * NEXT_INST_F handles constant (nCleanup), NEXT_INST_V is - * resolved at runtime for variable (nCleanup). + * Table describing the built-in math functions. Entries in this table are + * indexed by the values of the INST_CALL_BUILTIN_FUNC instruction's + * operand byte. + */ + +static const BuiltinFunc tclBuiltinFuncTable[] = { + {"acos", 1}, + {"asin", 1}, + {"atan", 1}, + {"atan2", 2}, + {"ceil", 1}, + {"cos", 1}, + {"cosh", 1}, + {"exp", 1}, + {"floor", 1}, + {"fmod", 2}, + {"hypot", 2}, + {"log", 1}, + {"log10", 1}, + {"pow", 2}, + {"sin", 1}, + {"sinh", 1}, + {"sqrt", 1}, + {"tan", 1}, + {"tanh", 1}, + {"abs", 1}, + {"double", 1}, + {"int", 1}, + {"rand", 0}, + {"round", 1}, + {"srand", 1}, + {"wide", 1}, + {NULL, 0}, +}; + +#define LAST_BUILTIN_FUNC 25 +#endif + +/* + * These variable-access macros have to coincide with those in tclVar.c + */ + +#define VarHashGetValue(hPtr) \ + ((Var *) ((char *)hPtr - TclOffset(VarInHash, entry))) + +static inline Var * +VarHashCreateVar( + TclVarHashTable *tablePtr, + Tcl_Obj *key, + int *newPtr) +{ + Tcl_HashEntry *hPtr = Tcl_CreateHashEntry((Tcl_HashTable *) tablePtr, + (char *) key, newPtr); + + if (!hPtr) { + return NULL; + } + return VarHashGetValue(hPtr); +} + +#define VarHashFindVar(tablePtr, key) \ + VarHashCreateVar((tablePtr), (key), NULL) + +/* + * The new macro for ending an instruction; note that a reasonable C-optimiser + * will resolve all branches at compile time. (result) is always a constant; + * the macro NEXT_INST_F handles constant (nCleanup), NEXT_INST_V is resolved + * at runtime for variable (nCleanup). * * ARGUMENTS: * pcAdjustment: how much to increment pc * nCleanup: how many objects to remove from the stack - * result: 0 indicates no object should be pushed on the - * stack; otherwise, push objResultPtr. If (result < 0), - * objResultPtr already has the correct reference count. + * resultHandling: 0 indicates no object should be pushed on the stack; + * otherwise, push objResultPtr. If (result < 0), objResultPtr already + * has the correct reference count. */ -#define NEXT_INST_F(pcAdjustment, nCleanup, result) \ - if (nCleanup == 0) {\ - if (result != 0) {\ - if ((result) > 0) {\ - PUSH_OBJECT(objResultPtr);\ - } else {\ - stackPtr[++stackTop] = objResultPtr;\ - }\ - } \ - pc += (pcAdjustment);\ - goto cleanup0;\ - } else if (result != 0) {\ - if ((result) > 0) {\ - Tcl_IncrRefCount(objResultPtr);\ - }\ - pc += (pcAdjustment);\ - switch (nCleanup) {\ - case 1: goto cleanup1_pushObjResultPtr;\ - case 2: goto cleanup2_pushObjResultPtr;\ - default: panic("ERROR: bad usage of macro NEXT_INST_F");\ - }\ - } else {\ - pc += (pcAdjustment);\ - switch (nCleanup) {\ - case 1: goto cleanup1;\ - case 2: goto cleanup2;\ - default: panic("ERROR: bad usage of macro NEXT_INST_F");\ - }\ - } - -#define NEXT_INST_V(pcAdjustment, nCleanup, result) \ +#define NEXT_INST_F(pcAdjustment, nCleanup, resultHandling) \ + if (nCleanup == 0) {\ + if (resultHandling != 0) {\ + if ((resultHandling) > 0) {\ + PUSH_OBJECT(objResultPtr);\ + } else {\ + *(++tosPtr) = objResultPtr;\ + }\ + } \ + pc += (pcAdjustment);\ + goto cleanup0;\ + } else if (resultHandling != 0) {\ + if ((resultHandling) > 0) {\ + Tcl_IncrRefCount(objResultPtr);\ + }\ + pc += (pcAdjustment);\ + switch (nCleanup) {\ + case 1: goto cleanup1_pushObjResultPtr;\ + case 2: goto cleanup2_pushObjResultPtr;\ + default: Tcl_Panic("bad usage of macro NEXT_INST_F");\ + }\ + } else {\ + pc += (pcAdjustment);\ + switch (nCleanup) {\ + case 1: goto cleanup1;\ + case 2: goto cleanup2;\ + default: Tcl_Panic("bad usage of macro NEXT_INST_F");\ + }\ + } + +#define NEXT_INST_V(pcAdjustment, nCleanup, resultHandling) \ pc += (pcAdjustment);\ cleanup = (nCleanup);\ - if (result) {\ - if ((result) > 0) {\ + if (resultHandling) {\ + if ((resultHandling) > 0) {\ Tcl_IncrRefCount(objResultPtr);\ }\ goto cleanupV_pushObjResultPtr;\ @@ -182,7 +240,6 @@ long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS] = { 0, 0, 0, 0, 0 }; goto cleanupV;\ } - /* * Macros used to cache often-referenced Tcl evaluation stack information * in local variables. Note that a DECACHE_STACK_INFO()-CACHE_STACK_INFO() @@ -192,46 +249,52 @@ long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS] = { 0, 0, 0, 0, 0 }; */ #define CACHE_STACK_INFO() \ - stackPtr = eePtr->stackPtr; \ - stackTop = eePtr->stackTop + checkInterp = 1 #define DECACHE_STACK_INFO() \ - eePtr->stackTop = stackTop - + esPtr->tosPtr = tosPtr /* * Macros used to access items on the Tcl evaluation stack. PUSH_OBJECT * increments the object's ref count since it makes the stack have another * reference pointing to the object. However, POP_OBJECT does not decrement - * the ref count. This is because the stack may hold the only reference to - * the object, so the object would be destroyed if its ref count were - * decremented before the caller had a chance to, e.g., store it in a - * variable. It is the caller's responsibility to decrement the ref count - * when it is finished with an object. + * the ref count. This is because the stack may hold the only reference to the + * object, so the object would be destroyed if its ref count were decremented + * before the caller had a chance to, e.g., store it in a variable. It is the + * caller's responsibility to decrement the ref count when it is finished with + * an object. * * WARNING! It is essential that objPtr only appear once in the PUSH_OBJECT - * macro. The actual parameter might be an expression with side effects, - * and this ensures that it will be executed only once. + * macro. The actual parameter might be an expression with side effects, and + * this ensures that it will be executed only once. */ - + #define PUSH_OBJECT(objPtr) \ - Tcl_IncrRefCount(stackPtr[++stackTop] = (objPtr)) - -#define POP_OBJECT() \ - (stackPtr[stackTop--]) + Tcl_IncrRefCount(*(++tosPtr) = (objPtr)) + +#define POP_OBJECT() *(tosPtr--) + +#define OBJ_AT_TOS *tosPtr + +#define OBJ_UNDER_TOS *(tosPtr-1) + +#define OBJ_AT_DEPTH(n) *(tosPtr-(n)) + +#define CURR_DEPTH (tosPtr - initTosPtr) /* * Macros used to trace instruction execution. The macros TRACE, - * TRACE_WITH_OBJ, and O2S are only used inside TclExecuteByteCode. - * O2S is only used in TRACE* calls to get a string from an object. + * TRACE_WITH_OBJ, and O2S are only used inside TclExecuteByteCode. O2S is + * only used in TRACE* calls to get a string from an object. */ #ifdef TCL_COMPILE_DEBUG # define TRACE(a) \ if (traceInstructions) { \ - fprintf(stdout, "%2d: %2d (%u) %s ", iPtr->numLevels, stackTop, \ - (unsigned int)(pc - codePtr->codeStart), \ - GetOpcodeName(pc)); \ + fprintf(stdout, "%2d: %2d (%u) %s ", iPtr->numLevels, \ + (int) CURR_DEPTH, \ + (unsigned)(pc - codePtr->codeStart), \ + GetOpcodeName(pc)); \ printf a; \ } # define TRACE_APPEND(a) \ @@ -240,18 +303,19 @@ long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS] = { 0, 0, 0, 0, 0 }; } # define TRACE_WITH_OBJ(a, objPtr) \ if (traceInstructions) { \ - fprintf(stdout, "%2d: %2d (%u) %s ", iPtr->numLevels, stackTop, \ - (unsigned int)(pc - codePtr->codeStart), \ - GetOpcodeName(pc)); \ + fprintf(stdout, "%2d: %2d (%u) %s ", iPtr->numLevels, \ + (int) CURR_DEPTH, \ + (unsigned)(pc - codePtr->codeStart), \ + GetOpcodeName(pc)); \ printf a; \ - TclPrintObject(stdout, objPtr, 30); \ - fprintf(stdout, "\n"); \ + TclPrintObject(stdout, objPtr, 30); \ + fprintf(stdout, "\n"); \ } # define O2S(objPtr) \ (objPtr ? TclGetString(objPtr) : "") #else /* !TCL_COMPILE_DEBUG */ # define TRACE(a) -# define TRACE_APPEND(a) +# define TRACE_APPEND(a) # define TRACE_WITH_OBJ(a, objPtr) # define O2S(objPtr) #endif /* TCL_COMPILE_DEBUG */ @@ -263,147 +327,308 @@ long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS] = { 0, 0, 0, 0, 0 }; #define TCL_DTRACE_INST_NEXT() \ if (TCL_DTRACE_INST_DONE_ENABLED()) {\ if (curInstName) {\ - TCL_DTRACE_INST_DONE(curInstName, stackTop - initStackTop,\ - stackPtr + stackTop);\ + TCL_DTRACE_INST_DONE(curInstName, (int) CURR_DEPTH, tosPtr);\ }\ curInstName = tclInstructionTable[*pc].name;\ if (TCL_DTRACE_INST_START_ENABLED()) {\ - TCL_DTRACE_INST_START(curInstName, stackTop - initStackTop,\ - stackPtr + stackTop);\ + TCL_DTRACE_INST_START(curInstName, (int) CURR_DEPTH, tosPtr);\ }\ } else if (TCL_DTRACE_INST_START_ENABLED()) {\ - TCL_DTRACE_INST_START(tclInstructionTable[*pc].name,\ - stackTop - initStackTop, stackPtr + stackTop);\ + TCL_DTRACE_INST_START(tclInstructionTable[*pc].name, (int) CURR_DEPTH,\ + tosPtr);\ } #define TCL_DTRACE_INST_LAST() \ if (TCL_DTRACE_INST_DONE_ENABLED() && curInstName) {\ - TCL_DTRACE_INST_DONE(curInstName, stackTop - initStackTop,\ - stackPtr + stackTop);\ + TCL_DTRACE_INST_DONE(curInstName, (int) CURR_DEPTH, tosPtr);\ } /* - * Macro to read a string containing either a wide or an int and - * decide which it is while decoding it at the same time. This - * enforces the policy that integer constants between LONG_MIN and - * LONG_MAX (inclusive) are represented by normal longs, and integer - * constants outside that range are represented by wide ints. + * Macro used in this file to save a function call for common uses of + * TclGetNumberFromObj(). The ANSI C "prototype" is: * - * GET_WIDE_OR_INT is the same as REQUIRE_WIDE_OR_INT except it never - * generates an error message. + * MODULE_SCOPE int GetNumberFromObj(Tcl_Interp *interp, Tcl_Obj *objPtr, + * ClientData *ptrPtr, int *tPtr); */ -#define REQUIRE_WIDE_OR_INT(resultVar, objPtr, longVar, wideVar) \ - (resultVar) = Tcl_GetWideIntFromObj(interp, (objPtr), &(wideVar)); \ - if ((resultVar) == TCL_OK && (wideVar) >= Tcl_LongAsWide(LONG_MIN) \ - && (wideVar) <= Tcl_LongAsWide(LONG_MAX)) { \ - (objPtr)->typePtr = &tclIntType; \ - (objPtr)->internalRep.longValue = (longVar) \ - = Tcl_WideAsLong(wideVar); \ - } -#define GET_WIDE_OR_INT(resultVar, objPtr, longVar, wideVar) \ - (resultVar) = Tcl_GetWideIntFromObj((Tcl_Interp *) NULL, (objPtr), \ - &(wideVar)); \ - if ((resultVar) == TCL_OK && (wideVar) >= Tcl_LongAsWide(LONG_MIN) \ - && (wideVar) <= Tcl_LongAsWide(LONG_MAX)) { \ - (objPtr)->typePtr = &tclIntType; \ - (objPtr)->internalRep.longValue = (longVar) \ - = Tcl_WideAsLong(wideVar); \ - } + +#ifdef NO_WIDE_TYPE + +#define GetNumberFromObj(interp, objPtr, ptrPtr, tPtr) \ + (((objPtr)->typePtr == &tclIntType) \ + ? (*(tPtr) = TCL_NUMBER_LONG, \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.longValue)), TCL_OK) : \ + ((objPtr)->typePtr == &tclDoubleType) \ + ? (((TclIsNaN((objPtr)->internalRep.doubleValue)) \ + ? (*(tPtr) = TCL_NUMBER_NAN) \ + : (*(tPtr) = TCL_NUMBER_DOUBLE)), \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.doubleValue)), TCL_OK) : \ + ((((objPtr)->typePtr == NULL) && ((objPtr)->bytes == NULL)) || \ + (((objPtr)->bytes != NULL) && ((objPtr)->length == 0))) \ + ? TCL_ERROR : \ + TclGetNumberFromObj((interp), (objPtr), (ptrPtr), (tPtr))) + +#else + +#define GetNumberFromObj(interp, objPtr, ptrPtr, tPtr) \ + (((objPtr)->typePtr == &tclIntType) \ + ? (*(tPtr) = TCL_NUMBER_LONG, \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.longValue)), TCL_OK) : \ + ((objPtr)->typePtr == &tclWideIntType) \ + ? (*(tPtr) = TCL_NUMBER_WIDE, \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.wideValue)), TCL_OK) : \ + ((objPtr)->typePtr == &tclDoubleType) \ + ? (((TclIsNaN((objPtr)->internalRep.doubleValue)) \ + ? (*(tPtr) = TCL_NUMBER_NAN) \ + : (*(tPtr) = TCL_NUMBER_DOUBLE)), \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.doubleValue)), TCL_OK) : \ + ((((objPtr)->typePtr == NULL) && ((objPtr)->bytes == NULL)) || \ + (((objPtr)->bytes != NULL) && ((objPtr)->length == 0))) \ + ? TCL_ERROR : \ + TclGetNumberFromObj((interp), (objPtr), (ptrPtr), (tPtr))) + +#endif + /* - * Combined with REQUIRE_WIDE_OR_INT, this gets a long value from - * an obj. + * Macro used in this file to save a function call for common uses of + * Tcl_GetBooleanFromObj(). The ANSI C "prototype" is: + * + * MODULE_SCOPE int TclGetBooleanFromObj(Tcl_Interp *interp, Tcl_Obj *objPtr, + * int *boolPtr); */ -#define FORCE_LONG(objPtr, longVar, wideVar) \ - if ((objPtr)->typePtr == &tclWideIntType) { \ - (longVar) = Tcl_WideAsLong(wideVar); \ - } -#define IS_INTEGER_TYPE(typePtr) \ - ((typePtr) == &tclIntType || (typePtr) == &tclWideIntType) -#define IS_NUMERIC_TYPE(typePtr) \ - (IS_INTEGER_TYPE(typePtr) || (typePtr) == &tclDoubleType) -#define W0 Tcl_LongAsWide(0) +#define TclGetBooleanFromObj(interp, objPtr, boolPtr) \ + ((((objPtr)->typePtr == &tclIntType) \ + || ((objPtr)->typePtr == &tclBooleanType)) \ + ? (*(boolPtr) = ((objPtr)->internalRep.longValue!=0), TCL_OK) \ + : Tcl_GetBooleanFromObj((interp), (objPtr), (boolPtr))) + /* - * For tracing that uses wide values. + * Macro used in this file to save a function call for common uses of + * Tcl_GetWideIntFromObj(). The ANSI C "prototype" is: + * + * MODULE_SCOPE int TclGetWideIntFromObj(Tcl_Interp *interp, Tcl_Obj *objPtr, + * Tcl_WideInt *wideIntPtr); */ -#define LLD "%" TCL_LL_MODIFIER "d" -#ifndef TCL_WIDE_INT_IS_LONG +#ifdef NO_WIDE_TYPE +#define TclGetWideIntFromObj(interp, objPtr, wideIntPtr) \ + (((objPtr)->typePtr == &tclIntType) \ + ? (*(wideIntPtr) = (Tcl_WideInt) \ + ((objPtr)->internalRep.longValue), TCL_OK) : \ + Tcl_GetWideIntFromObj((interp), (objPtr), (wideIntPtr))) +#else +#define TclGetWideIntFromObj(interp, objPtr, wideIntPtr) \ + (((objPtr)->typePtr == &tclWideIntType) \ + ? (*(wideIntPtr) = (objPtr)->internalRep.wideValue, TCL_OK) : \ + ((objPtr)->typePtr == &tclIntType) \ + ? (*(wideIntPtr) = (Tcl_WideInt) \ + ((objPtr)->internalRep.longValue), TCL_OK) : \ + Tcl_GetWideIntFromObj((interp), (objPtr), (wideIntPtr))) +#endif + /* - * Extract a double value from a general numeric object. + * Macro used to make the check for type overflow more mnemonic. This works by + * comparing sign bits; the rest of the word is irrelevant. The ANSI C + * "prototype" (where inttype_t is any integer type) is: + * + * MODULE_SCOPE int Overflowing(inttype_t a, inttype_t b, inttype_t sum); + * + * Check first the condition most likely to fail in usual code (at least for + * usage in [incr]: do the first summand and the sum have != signs? */ -#define GET_DOUBLE_VALUE(doubleVar, objPtr, typePtr) \ - if ((typePtr) == &tclIntType) { \ - (doubleVar) = (double) (objPtr)->internalRep.longValue; \ - } else if ((typePtr) == &tclWideIntType) { \ - (doubleVar) = Tcl_WideAsDouble((objPtr)->internalRep.wideValue);\ - } else { \ - (doubleVar) = (objPtr)->internalRep.doubleValue; \ - } -#else /* TCL_WIDE_INT_IS_LONG */ -#define GET_DOUBLE_VALUE(doubleVar, objPtr, typePtr) \ - if (((typePtr) == &tclIntType) || ((typePtr) == &tclWideIntType)) { \ - (doubleVar) = (double) (objPtr)->internalRep.longValue; \ - } else { \ - (doubleVar) = (objPtr)->internalRep.doubleValue; \ - } -#endif /* TCL_WIDE_INT_IS_LONG */ + +#define Overflowing(a,b,sum) ((((a)^(sum)) < 0) && (((a)^(b)) >= 0)) + +/* + * Custom object type only used in this file; values of its type should never + * be seen by user scripts. + */ + +static Tcl_ObjType dictIteratorType = { + "dictIterator", + NULL, NULL, NULL, NULL +}; + +/* + * Auxiliary tables used to compute powers of small integers + */ + +#if (LONG_MAX == 0x7fffffff) + +/* + * Maximum base that, when raised to powers 2, 3, ... 8, fits in a 32-bit + * signed integer + */ + +static const long MaxBase32[] = {46340, 1290, 215, 73, 35, 21, 14}; +static const size_t MaxBase32Size = sizeof(MaxBase32)/sizeof(long); + +/* + * Table giving 3, 4, ..., 11, raised to the powers 9, 10, ..., as far as they + * fit in a 32-bit signed integer. Exp32Index[i] gives the starting index of + * powers of i+3; Exp32Value[i] gives the corresponding powers. + */ + +static const unsigned short Exp32Index[] = { + 0, 11, 18, 23, 26, 29, 31, 32, 33 +}; +static const size_t Exp32IndexSize = sizeof(Exp32Index)/sizeof(unsigned short); +static const long Exp32Value[] = { + 19683, 59049, 177147, 531441, 1594323, 4782969, 14348907, 43046721, + 129140163, 387420489, 1162261467, 262144, 1048576, 4194304, + 16777216, 67108864, 268435456, 1073741824, 1953125, 9765625, + 48828125, 244140625, 1220703125, 10077696, 60466176, 362797056, + 40353607, 282475249, 1977326743, 134217728, 1073741824, 387420489, + 1000000000 +}; +static const size_t Exp32ValueSize = sizeof(Exp32Value)/sizeof(long); + +#endif /* LONG_MAX == 0x7fffffff -- 32 bit machine */ + +#if (LONG_MAX > 0x7fffffff) || !defined(TCL_WIDE_INT_IS_LONG) + +/* + * Maximum base that, when raised to powers 2, 3, ..., 16, fits in a + * Tcl_WideInt. + */ + +static const Tcl_WideInt MaxBase64[] = { + (Tcl_WideInt)46340*65536+62259, /* 3037000499 == isqrt(2**63-1) */ + (Tcl_WideInt)2097151, (Tcl_WideInt)55108, (Tcl_WideInt)6208, + (Tcl_WideInt)1448, (Tcl_WideInt)511, (Tcl_WideInt)234, (Tcl_WideInt)127, + (Tcl_WideInt)78, (Tcl_WideInt)52, (Tcl_WideInt)38, (Tcl_WideInt)28, + (Tcl_WideInt)22, (Tcl_WideInt)18, (Tcl_WideInt)15 +}; +static const size_t MaxBase64Size = sizeof(MaxBase64)/sizeof(Tcl_WideInt); + +/* + *Table giving 3, 4, ..., 13 raised to powers greater than 16 when the + * results fit in a 64-bit signed integer. + */ + +static const unsigned short Exp64Index[] = { + 0, 23, 38, 49, 57, 63, 67, 70, 72, 74, 75, 76 +}; +static const size_t Exp64IndexSize = sizeof(Exp64Index)/sizeof(unsigned short); +static const Tcl_WideInt Exp64Value[] = { + (Tcl_WideInt)243*243*243*3*3, + (Tcl_WideInt)243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*3*3*3*3, + (Tcl_WideInt)243*243*243*243, + (Tcl_WideInt)243*243*243*243*3, + (Tcl_WideInt)243*243*243*243*3*3, + (Tcl_WideInt)243*243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*243*3*3*3*3, + (Tcl_WideInt)243*243*243*243*243, + (Tcl_WideInt)243*243*243*243*243*3, + (Tcl_WideInt)243*243*243*243*243*3*3, + (Tcl_WideInt)243*243*243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*243*243*3*3*3*3, + (Tcl_WideInt)243*243*243*243*243*243, + (Tcl_WideInt)243*243*243*243*243*243*3, + (Tcl_WideInt)243*243*243*243*243*243*3*3, + (Tcl_WideInt)243*243*243*243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*243*243*243*3*3*3*3, + (Tcl_WideInt)243*243*243*243*243*243*243, + (Tcl_WideInt)243*243*243*243*243*243*243*3, + (Tcl_WideInt)243*243*243*243*243*243*243*3*3, + (Tcl_WideInt)243*243*243*243*243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*243*243*243*243*3*3*3*3, + (Tcl_WideInt)1024*1024*1024*4*4, + (Tcl_WideInt)1024*1024*1024*4*4*4, + (Tcl_WideInt)1024*1024*1024*4*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024, + (Tcl_WideInt)1024*1024*1024*1024*4, + (Tcl_WideInt)1024*1024*1024*1024*4*4, + (Tcl_WideInt)1024*1024*1024*1024*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024*4*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024*1024, + (Tcl_WideInt)1024*1024*1024*1024*1024*4, + (Tcl_WideInt)1024*1024*1024*1024*1024*4*4, + (Tcl_WideInt)1024*1024*1024*1024*1024*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024*1024*4*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024*1024*1024, + (Tcl_WideInt)1024*1024*1024*1024*1024*1024*4, + (Tcl_WideInt)3125*3125*3125*5*5, + (Tcl_WideInt)3125*3125*3125*5*5*5, + (Tcl_WideInt)3125*3125*3125*5*5*5*5, + (Tcl_WideInt)3125*3125*3125*3125, + (Tcl_WideInt)3125*3125*3125*3125*5, + (Tcl_WideInt)3125*3125*3125*3125*5*5, + (Tcl_WideInt)3125*3125*3125*3125*5*5*5, + (Tcl_WideInt)3125*3125*3125*3125*5*5*5*5, + (Tcl_WideInt)3125*3125*3125*3125*3125, + (Tcl_WideInt)3125*3125*3125*3125*3125*5, + (Tcl_WideInt)3125*3125*3125*3125*3125*5*5, + (Tcl_WideInt)7776*7776*7776*6*6, + (Tcl_WideInt)7776*7776*7776*6*6*6, + (Tcl_WideInt)7776*7776*7776*6*6*6*6, + (Tcl_WideInt)7776*7776*7776*7776, + (Tcl_WideInt)7776*7776*7776*7776*6, + (Tcl_WideInt)7776*7776*7776*7776*6*6, + (Tcl_WideInt)7776*7776*7776*7776*6*6*6, + (Tcl_WideInt)7776*7776*7776*7776*6*6*6*6, + (Tcl_WideInt)16807*16807*16807*7*7, + (Tcl_WideInt)16807*16807*16807*7*7*7, + (Tcl_WideInt)16807*16807*16807*7*7*7*7, + (Tcl_WideInt)16807*16807*16807*16807, + (Tcl_WideInt)16807*16807*16807*16807*7, + (Tcl_WideInt)16807*16807*16807*16807*7*7, + (Tcl_WideInt)32768*32768*32768*8*8, + (Tcl_WideInt)32768*32768*32768*8*8*8, + (Tcl_WideInt)32768*32768*32768*8*8*8*8, + (Tcl_WideInt)32768*32768*32768*32768, + (Tcl_WideInt)59049*59049*59049*9*9, + (Tcl_WideInt)59049*59049*59049*9*9*9, + (Tcl_WideInt)59049*59049*59049*9*9*9*9, + (Tcl_WideInt)100000*100000*100000*10*10, + (Tcl_WideInt)100000*100000*100000*10*10*10, + (Tcl_WideInt)161051*161051*161051*11*11, + (Tcl_WideInt)161051*161051*161051*11*11*11, + (Tcl_WideInt)248832*248832*248832*12*12, + (Tcl_WideInt)371293*371293*371293*13*13 +}; +static const size_t Exp64ValueSize = sizeof(Exp64Value)/sizeof(Tcl_WideInt); + +#endif /* * Declarations for local procedures to this file: */ -static int TclExecuteByteCode _ANSI_ARGS_((Tcl_Interp *interp, - ByteCode *codePtr)); -static void DupExprCodeInternalRep _ANSI_ARGS_((Tcl_Obj *srcPtr, - Tcl_Obj *copyPtr)); -static int ExprAbsFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); -static int ExprBinaryFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); -static int ExprCallMathFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, int objc, Tcl_Obj **objv)); -static int ExprDoubleFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); -static int ExprIntFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); -static int ExprRandFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); -static int ExprRoundFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); -static int ExprSrandFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); -static int ExprUnaryFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); -static int ExprWideFunc _ANSI_ARGS_((Tcl_Interp *interp, - ExecEnv *eePtr, ClientData clientData)); #ifdef TCL_COMPILE_STATS -static int EvalStatsCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, - Tcl_Obj *CONST objv[])); +static int EvalStatsCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); #endif /* TCL_COMPILE_STATS */ -static void FreeExprCodeInternalRep _ANSI_ARGS_ ((Tcl_Obj *objPtr)); -#ifdef TCL_COMPILE_DEBUG -static char * GetOpcodeName _ANSI_ARGS_((unsigned char *pc)); -#endif /* TCL_COMPILE_DEBUG */ -static ExceptionRange * GetExceptRangeForPc _ANSI_ARGS_((unsigned char *pc, - int catchOnly, ByteCode* codePtr)); -static char * GetSrcInfoForPc _ANSI_ARGS_((unsigned char *pc, - ByteCode* codePtr, int *lengthPtr)); -static void GrowEvaluationStack _ANSI_ARGS_((ExecEnv *eePtr)); -static void IllegalExprOperandType _ANSI_ARGS_(( - Tcl_Interp *interp, unsigned char *pc, - Tcl_Obj *opndPtr)); -static void InitByteCodeExecution _ANSI_ARGS_(( - Tcl_Interp *interp)); #ifdef TCL_COMPILE_DEBUG -static void PrintByteCodeInfo _ANSI_ARGS_((ByteCode *codePtr)); -static CONST char * StringForResultCode _ANSI_ARGS_((int result)); -static void ValidatePcAndStackTop _ANSI_ARGS_(( - ByteCode *codePtr, unsigned char *pc, - int stackTop, int stackLowerBound)); +static char * GetOpcodeName(unsigned char *pc); +static void PrintByteCodeInfo(ByteCode *codePtr); +static const char * StringForResultCode(int result); +static void ValidatePcAndStackTop(ByteCode *codePtr, + unsigned char *pc, int stackTop, + int stackLowerBound, int checkStack); #endif /* TCL_COMPILE_DEBUG */ -static int VerifyExprObjType _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *objPtr)); +static void DeleteExecStack(ExecStack *esPtr); +static void DupExprCodeInternalRep(Tcl_Obj *srcPtr, + Tcl_Obj *copyPtr); +static void FreeExprCodeInternalRep(Tcl_Obj *objPtr); +static ExceptionRange * GetExceptRangeForPc(unsigned char *pc, int catchOnly, + ByteCode *codePtr); +static const char * GetSrcInfoForPc(unsigned char *pc, ByteCode *codePtr, + int *lengthPtr); +static Tcl_Obj ** GrowEvaluationStack(ExecEnv *eePtr, int growth, + int move); +static void IllegalExprOperandType(Tcl_Interp *interp, + unsigned char *pc, Tcl_Obj *opndPtr); +static void InitByteCodeExecution(Tcl_Interp *interp); +/* Useful elsewhere, make available in tclInt.h or stubs? */ +static Tcl_Obj ** StackAllocWords(Tcl_Interp *interp, int numWords); +static Tcl_Obj ** StackReallocWords(Tcl_Interp *interp, int numWords); /* * The structure below defines a bytecode Tcl object type to hold the @@ -417,44 +642,6 @@ static Tcl_ObjType exprCodeType = { NULL, /* updateStringProc */ NULL /* setFromAnyProc */ }; - -/* - * Table describing the built-in math functions. Entries in this table are - * indexed by the values of the INST_CALL_BUILTIN_FUNC instruction's - * operand byte. - */ - -BuiltinFunc tclBuiltinFuncTable[] = { -#ifndef TCL_NO_MATH - {"acos", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) acos}, - {"asin", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) asin}, - {"atan", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) atan}, - {"atan2", 2, {TCL_DOUBLE, TCL_DOUBLE}, ExprBinaryFunc, (ClientData) atan2}, - {"ceil", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) ceil}, - {"cos", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) cos}, - {"cosh", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) cosh}, - {"exp", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) exp}, - {"floor", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) floor}, - {"fmod", 2, {TCL_DOUBLE, TCL_DOUBLE}, ExprBinaryFunc, (ClientData) fmod}, - {"hypot", 2, {TCL_DOUBLE, TCL_DOUBLE}, ExprBinaryFunc, (ClientData) hypot}, - {"log", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) log}, - {"log10", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) log10}, - {"pow", 2, {TCL_DOUBLE, TCL_DOUBLE}, ExprBinaryFunc, (ClientData) pow}, - {"sin", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) sin}, - {"sinh", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) sinh}, - {"sqrt", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) sqrt}, - {"tan", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) tan}, - {"tanh", 1, {TCL_DOUBLE}, ExprUnaryFunc, (ClientData) tanh}, -#endif - {"abs", 1, {TCL_EITHER}, ExprAbsFunc, 0}, - {"double", 1, {TCL_EITHER}, ExprDoubleFunc, 0}, - {"int", 1, {TCL_EITHER}, ExprIntFunc, 0}, - {"rand", 0, {TCL_EITHER}, ExprRandFunc, 0}, /* NOTE: rand takes no args. */ - {"round", 1, {TCL_EITHER}, ExprRoundFunc, 0}, - {"srand", 1, {TCL_INT}, ExprSrandFunc, 0}, - {"wide", 1, {TCL_EITHER}, ExprWideFunc, 0}, - {0, 0, {TCL_INT}, 0, 0}, -}; /* *---------------------------------------------------------------------- @@ -469,29 +656,28 @@ BuiltinFunc tclBuiltinFuncTable[] = { * * Side effects: * This procedure initializes the array of instruction names. If - * compiling with the TCL_COMPILE_STATS flag, it initializes the - * array that counts the executions of each instruction and it - * creates the "evalstats" command. It also establishes the link - * between the Tcl "tcl_traceExec" and C "tclTraceExec" variables. + * compiling with the TCL_COMPILE_STATS flag, it initializes the array + * that counts the executions of each instruction and it creates the + * "evalstats" command. It also establishes the link between the Tcl + * "tcl_traceExec" and C "tclTraceExec" variables. * *---------------------------------------------------------------------- */ static void -InitByteCodeExecution(interp) - Tcl_Interp *interp; /* Interpreter for which the Tcl variable +InitByteCodeExecution( + Tcl_Interp *interp) /* Interpreter for which the Tcl variable * "tcl_traceExec" is linked to control * instruction tracing. */ { #ifdef TCL_COMPILE_DEBUG if (Tcl_LinkVar(interp, "tcl_traceExec", (char *) &tclTraceExec, - TCL_LINK_INT) != TCL_OK) { - panic("InitByteCodeExecution: can't create link for tcl_traceExec variable"); + TCL_LINK_INT) != TCL_OK) { + Tcl_Panic("InitByteCodeExecution: can't create link for tcl_traceExec variable"); } #endif -#ifdef TCL_COMPILE_STATS - Tcl_CreateObjCommand(interp, "evalstats", EvalStatsCmd, - (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); +#ifdef TCL_COMPILE_STATS + Tcl_CreateObjCommand(interp, "evalstats", EvalStatsCmd, NULL, NULL); #endif /* TCL_COMPILE_STATS */ } @@ -501,18 +687,18 @@ InitByteCodeExecution(interp) * TclCreateExecEnv -- * * This procedure creates a new execution environment for Tcl bytecode - * execution. An ExecEnv points to a Tcl evaluation stack. An ExecEnv - * is typically created once for each Tcl interpreter (Interp - * structure) and recursively passed to TclExecuteByteCode to execute - * ByteCode sequences for nested commands. + * execution. An ExecEnv points to a Tcl evaluation stack. An ExecEnv is + * typically created once for each Tcl interpreter (Interp structure) and + * recursively passed to TclExecuteByteCode to execute ByteCode sequences + * for nested commands. * * Results: * A newly allocated ExecEnv is returned. This points to an empty * evaluation stack of the standard initial size. * * Side effects: - * The bytecode interpreter is also initialized here, as this - * procedure will be called before any call to TclExecuteByteCode. + * The bytecode interpreter is also initialized here, as this procedure + * will be called before any call to TclExecuteByteCode. * *---------------------------------------------------------------------- */ @@ -520,33 +706,25 @@ InitByteCodeExecution(interp) #define TCL_STACK_INITIAL_SIZE 2000 ExecEnv * -TclCreateExecEnv(interp) - Tcl_Interp *interp; /* Interpreter for which the execution +TclCreateExecEnv( + Tcl_Interp *interp) /* Interpreter for which the execution * environment is being created. */ { ExecEnv *eePtr = (ExecEnv *) ckalloc(sizeof(ExecEnv)); - Tcl_Obj **stackPtr; + ExecStack *esPtr = (ExecStack *) ckalloc(sizeof(ExecStack) + + (size_t) (TCL_STACK_INITIAL_SIZE-1) * sizeof(Tcl_Obj *)); - stackPtr = (Tcl_Obj **) - ckalloc((size_t) (TCL_STACK_INITIAL_SIZE * sizeof(Tcl_Obj *))); + eePtr->execStackPtr = esPtr; + TclNewBooleanObj(eePtr->constants[0], 0); + Tcl_IncrRefCount(eePtr->constants[0]); + TclNewBooleanObj(eePtr->constants[1], 1); + Tcl_IncrRefCount(eePtr->constants[1]); - /* - * Use the bottom pointer to keep a reference count; the - * execution environment holds a reference. - */ - - stackPtr++; - eePtr->stackPtr = stackPtr; - stackPtr[-1] = (Tcl_Obj *) ((char *) 1); - - eePtr->stackTop = -1; - eePtr->stackEnd = (TCL_STACK_INITIAL_SIZE - 2); - - eePtr->errorInfo = Tcl_NewStringObj("::errorInfo", -1); - Tcl_IncrRefCount(eePtr->errorInfo); - - eePtr->errorCode = Tcl_NewStringObj("::errorCode", -1); - Tcl_IncrRefCount(eePtr->errorCode); + esPtr->prevPtr = NULL; + esPtr->nextPtr = NULL; + esPtr->markerPtr = NULL; + esPtr->endPtr = &esPtr->stackWords[TCL_STACK_INITIAL_SIZE-1]; + esPtr->tosPtr = &esPtr->stackWords[-1]; Tcl_MutexLock(&execMutex); if (!execInitialized) { @@ -571,23 +749,50 @@ TclCreateExecEnv(interp) * None. * * Side effects: - * Storage for an ExecEnv and its contained storage (e.g. the - * evaluation stack) is freed. + * Storage for an ExecEnv and its contained storage (e.g. the evaluation + * stack) is freed. * *---------------------------------------------------------------------- */ +static void +DeleteExecStack( + ExecStack *esPtr) +{ + if (esPtr->markerPtr) { + Tcl_Panic("freeing an execStack which is still in use"); + } + + if (esPtr->prevPtr) { + esPtr->prevPtr->nextPtr = esPtr->nextPtr; + } + if (esPtr->nextPtr) { + esPtr->nextPtr->prevPtr = esPtr->prevPtr; + } + ckfree((char *) esPtr); +} + void -TclDeleteExecEnv(eePtr) - ExecEnv *eePtr; /* Execution environment to free. */ +TclDeleteExecEnv( + ExecEnv *eePtr) /* Execution environment to free. */ { - if (eePtr->stackPtr[-1] == (Tcl_Obj *) ((char *) 1)) { - ckfree((char *) (eePtr->stackPtr-1)); - } else { - panic("ERROR: freeing an execEnv whose stack is still in use.\n"); + ExecStack *esPtr = eePtr->execStackPtr, *tmpPtr; + + /* + * Delete all stacks in this exec env. + */ + + while (esPtr->nextPtr) { + esPtr = esPtr->nextPtr; + } + while (esPtr) { + tmpPtr = esPtr; + esPtr = tmpPtr->prevPtr; + DeleteExecStack(tmpPtr); } - TclDecrRefCount(eePtr->errorInfo); - TclDecrRefCount(eePtr->errorCode); + + TclDecrRefCount(eePtr->constants[0]); + TclDecrRefCount(eePtr->constants[1]); ckfree((char *) eePtr); } @@ -596,21 +801,21 @@ TclDeleteExecEnv(eePtr) * * TclFinalizeExecution -- * - * Finalizes the execution environment setup so that it can be - * later reinitialized. + * Finalizes the execution environment setup so that it can be later + * reinitialized. * * Results: * None. * * Side effects: - * After this call, the next time TclCreateExecEnv will be called - * it will call InitByteCodeExecution. + * After this call, the next time TclCreateExecEnv will be called it will + * call InitByteCodeExecution. * *---------------------------------------------------------------------- */ void -TclFinalizeExecution() +TclFinalizeExecution(void) { Tcl_MutexLock(&execMutex); execInitialized = 0; @@ -619,69 +824,326 @@ TclFinalizeExecution() } /* + * Auxiliary code to insure that GrowEvaluationStack always returns correctly + * aligned memory. + * + * WALLOCALIGN represents the alignment reqs in words, just as TCL_ALLOCALIGN + * represents the reqs in bytes. This assumes that TCL_ALLOCALIGN is a + * multiple of the wordsize 'sizeof(Tcl_Obj *)'. + */ + +#define WALLOCALIGN \ + (TCL_ALLOCALIGN/sizeof(Tcl_Obj *)) + +/* + * OFFSET computes how many words have to be skipped until the next aligned + * word. Note that we are only interested in the low order bits of ptr, so + * that any possible information loss in PTR2INT is of no consequence. + */ + +static inline int +OFFSET( + void *ptr) +{ + int mask = TCL_ALLOCALIGN-1; + int base = PTR2INT(ptr) & mask; + return (TCL_ALLOCALIGN - base)/sizeof(Tcl_Obj *); +} + +/* + * Given a marker, compute where the following aligned memory starts. + */ + +#define MEMSTART(markerPtr) \ + ((markerPtr) + OFFSET(markerPtr)) + + +/* *---------------------------------------------------------------------- * * GrowEvaluationStack -- * - * This procedure grows a Tcl evaluation stack stored in an ExecEnv. + * This procedure grows a Tcl evaluation stack stored in an ExecEnv, + * copying over the words since the last mark if so requested. A mark is + * set at the beginning of the new area when no copying is requested. * * Results: - * None. + * Returns a pointer to the first usable word in the (possibly) grown + * stack. * * Side effects: - * The size of the evaluation stack is doubled. + * The size of the evaluation stack may be grown, a marker is set * *---------------------------------------------------------------------- */ -static void -GrowEvaluationStack(eePtr) - register ExecEnv *eePtr; /* Points to the ExecEnv with an evaluation - * stack to enlarge. */ +static Tcl_Obj ** +GrowEvaluationStack( + ExecEnv *eePtr, /* Points to the ExecEnv with an evaluation + * stack to enlarge. */ + int growth, /* How much larger than the current used + * size. */ + int move) /* 1 if move words since last marker. */ { + ExecStack *esPtr = eePtr->execStackPtr, *oldPtr = NULL; + int newBytes, newElems, currElems; + int needed = growth - (esPtr->endPtr - esPtr->tosPtr); + Tcl_Obj **markerPtr = esPtr->markerPtr, **memStart; + int moveWords = 0; + + if (move) { + if (!markerPtr) { + Tcl_Panic("STACK: Reallocating with no previous alloc"); + } + if (needed <= 0) { + return MEMSTART(markerPtr); + } + } else { + Tcl_Obj **tmpMarkerPtr = esPtr->tosPtr + 1; + int offset = OFFSET(tmpMarkerPtr); + + if (needed + offset < 0) { + /* + * Put a marker pointing to the previous marker in this stack, and + * store it in esPtr as the current marker. Return a pointer to + * the start of aligned memory. + */ + + esPtr->markerPtr = tmpMarkerPtr; + memStart = tmpMarkerPtr + offset; + esPtr->tosPtr = memStart - 1; + *esPtr->markerPtr = (Tcl_Obj *) markerPtr; + return memStart; + } + } + /* - * The current Tcl stack elements are stored from eePtr->stackPtr[0] - * to eePtr->stackPtr[eePtr->stackEnd] (inclusive). + * Reset move to hold the number of words to be moved to new stack (if + * any) and growth to hold the complete stack requirements: add one for + * the marker, (WALLOCALIGN-1) for the maximal possible offset. */ - int currElems = (eePtr->stackEnd + 1); - int newElems = 2*currElems; - int currBytes = currElems * sizeof(Tcl_Obj *); - int newBytes = 2*currBytes; - Tcl_Obj **newStackPtr = (Tcl_Obj **) ckalloc((unsigned) newBytes); - Tcl_Obj **oldStackPtr = eePtr->stackPtr; + if (move) { + moveWords = esPtr->tosPtr - MEMSTART(markerPtr) + 1; + } + needed = growth + moveWords + WALLOCALIGN; /* - * We keep the stack reference count as a (char *), as that - * works nicely as a portable pointer-sized counter. + * Check if there is enough room in the next stack (if there is one, it + * should be both empty and the last one!) */ - char *refCount = (char *) oldStackPtr[-1]; + if (esPtr->nextPtr) { + oldPtr = esPtr; + esPtr = oldPtr->nextPtr; + currElems = esPtr->endPtr - &esPtr->stackWords[-1]; + if (esPtr->markerPtr || (esPtr->tosPtr != &esPtr->stackWords[-1])) { + Tcl_Panic("STACK: Stack after current is in use"); + } + if (esPtr->nextPtr) { + Tcl_Panic("STACK: Stack after current is not last"); + } + if (needed <= currElems) { + goto newStackReady; + } + DeleteExecStack(esPtr); + esPtr = oldPtr; + } else { + currElems = esPtr->endPtr - &esPtr->stackWords[-1]; + } /* - * Copy the existing stack items to the new stack space, free the old - * storage if appropriate, and record the refCount of the new stack - * held by the environment. + * We need to allocate a new stack! It needs to store 'growth' words, + * including the elements to be copied over and the new marker. */ - - newStackPtr++; - memcpy((VOID *) newStackPtr, (VOID *) oldStackPtr, - (size_t) currBytes); - if (refCount == (char *) 1) { - ckfree((VOID *) (oldStackPtr-1)); - } else { - /* - * Remove the reference corresponding to the - * environment pointer. - */ - - oldStackPtr[-1] = (Tcl_Obj *) (refCount-1); + newElems = 2*currElems; + while (needed > newElems) { + newElems *= 2; + } + newBytes = sizeof (ExecStack) + (newElems-1) * sizeof(Tcl_Obj *); + + oldPtr = esPtr; + esPtr = (ExecStack *) ckalloc(newBytes); + + oldPtr->nextPtr = esPtr; + esPtr->prevPtr = oldPtr; + esPtr->nextPtr = NULL; + esPtr->endPtr = &esPtr->stackWords[newElems-1]; + + newStackReady: + eePtr->execStackPtr = esPtr; + + /* + * Store a NULL marker at the beginning of the stack, to indicate that + * this is the first marker in this stack and that rewinding to here + * should actually be a return to the previous stack. + */ + + esPtr->stackWords[0] = NULL; + esPtr->markerPtr = &esPtr->stackWords[0]; + memStart = MEMSTART(esPtr->markerPtr); + esPtr->tosPtr = memStart - 1; + + if (move) { + memcpy(memStart, MEMSTART(markerPtr), moveWords*sizeof(Tcl_Obj *)); + esPtr->tosPtr += moveWords; + oldPtr->markerPtr = (Tcl_Obj **) *markerPtr; + oldPtr->tosPtr = markerPtr-1; + } + + /* + * Free the old stack if it is now unused. + */ + + if (!oldPtr->markerPtr) { + DeleteExecStack(oldPtr); + } + + return memStart; +} + +/* + *-------------------------------------------------------------- + * + * TclStackAlloc, TclStackRealloc, TclStackFree -- + * + * Allocate memory from the execution stack; it has to be returned later + * with a call to TclStackFree. + * + * Results: + * A pointer to the first byte allocated, or panics if the allocation did + * not succeed. + * + * Side effects: + * The execution stack may be grown. + * + *-------------------------------------------------------------- + */ + +static Tcl_Obj ** +StackAllocWords( + Tcl_Interp *interp, + int numWords) +{ + /* + * Note that GrowEvaluationStack sets a marker in the stack. This marker + * is read when rewinding, e.g., by TclStackFree. + */ + + Interp *iPtr = (Interp *) interp; + ExecEnv *eePtr = iPtr->execEnvPtr; + Tcl_Obj **resPtr = GrowEvaluationStack(eePtr, numWords, 0); + + eePtr->execStackPtr->tosPtr += numWords; + return resPtr; +} + +static Tcl_Obj ** +StackReallocWords( + Tcl_Interp *interp, + int numWords) +{ + Interp *iPtr = (Interp *) interp; + ExecEnv *eePtr = iPtr->execEnvPtr; + Tcl_Obj **resPtr = GrowEvaluationStack(eePtr, numWords, 1); + + eePtr->execStackPtr->tosPtr += numWords; + return resPtr; +} + +void +TclStackFree( + Tcl_Interp *interp, + void *freePtr) +{ + Interp *iPtr = (Interp *) interp; + ExecEnv *eePtr; + ExecStack *esPtr; + Tcl_Obj **markerPtr; + + if (iPtr == NULL || iPtr->execEnvPtr == NULL) { + ckfree((char *) freePtr); + return; } - eePtr->stackPtr = newStackPtr; - eePtr->stackEnd = (newElems - 2); /* index of last usable item */ - newStackPtr[-1] = (Tcl_Obj *) ((char *) 1); + /* + * Rewind the stack to the previous marker position. The current marker, + * as set in the last call to GrowEvaluationStack, contains a pointer to + * the previous marker. + */ + + eePtr = iPtr->execEnvPtr; + esPtr = eePtr->execStackPtr; + markerPtr = esPtr->markerPtr; + + if (MEMSTART(markerPtr) != (Tcl_Obj **)freePtr) { + Tcl_Panic("TclStackFree: incorrect freePtr. Call out of sequence?"); + } + + esPtr->tosPtr = markerPtr-1; + esPtr->markerPtr = (Tcl_Obj **) *markerPtr; + if (*markerPtr) { + return; + } + + /* + * Return to previous stack. + */ + + esPtr->tosPtr = &esPtr->stackWords[-1]; + if (esPtr->prevPtr) { + eePtr->execStackPtr = esPtr->prevPtr; + } + if (esPtr->nextPtr) { + if (!esPtr->prevPtr) { + eePtr->execStackPtr = esPtr->nextPtr; + } + DeleteExecStack(esPtr); + } +} + +void * +TclStackAlloc( + Tcl_Interp *interp, + int numBytes) +{ + Interp *iPtr = (Interp *) interp; + int numWords = (numBytes + (sizeof(Tcl_Obj *) - 1))/sizeof(Tcl_Obj *); + + if (iPtr == NULL || iPtr->execEnvPtr == NULL) { + return (void *) ckalloc(numBytes); + } + + return (void *) StackAllocWords(interp, numWords); +} + +void * +TclStackRealloc( + Tcl_Interp *interp, + void *ptr, + int numBytes) +{ + Interp *iPtr = (Interp *) interp; + ExecEnv *eePtr; + ExecStack *esPtr; + Tcl_Obj **markerPtr; + int numWords; + + if (iPtr == NULL || iPtr->execEnvPtr == NULL) { + return (void *) ckrealloc((char *) ptr, numBytes); + } + + eePtr = iPtr->execEnvPtr; + esPtr = eePtr->execStackPtr; + markerPtr = esPtr->markerPtr; + + if (MEMSTART(markerPtr) != (Tcl_Obj **)ptr) { + Tcl_Panic("TclStackRealloc: incorrect ptr. Call out of sequence?"); + } + + numWords = (numBytes + (sizeof(Tcl_Obj *) - 1))/sizeof(Tcl_Obj *); + return (void *) StackReallocWords(interp, numWords); } /* @@ -692,150 +1154,97 @@ GrowEvaluationStack(eePtr) * Evaluate an expression in a Tcl_Obj. * * Results: - * A standard Tcl object result. If the result is other than TCL_OK, - * then the interpreter's result contains an error message. If the - * result is TCL_OK, then a pointer to the expression's result value - * object is stored in resultPtrPtr. In that case, the object's ref - * count is incremented to reflect the reference returned to the - * caller; the caller is then responsible for the resulting object - * and must, for example, decrement the ref count when it is finished - * with the object. + * A standard Tcl object result. If the result is other than TCL_OK, then + * the interpreter's result contains an error message. If the result is + * TCL_OK, then a pointer to the expression's result value object is + * stored in resultPtrPtr. In that case, the object's ref count is + * incremented to reflect the reference returned to the caller; the + * caller is then responsible for the resulting object and must, for + * example, decrement the ref count when it is finished with the object. * * Side effects: - * Any side effects caused by subcommands in the expression, if any. - * The interpreter result is not modified unless there is an error. + * Any side effects caused by subcommands in the expression, if any. The + * interpreter result is not modified unless there is an error. * *-------------------------------------------------------------- */ int -Tcl_ExprObj(interp, objPtr, resultPtrPtr) - Tcl_Interp *interp; /* Context in which to evaluate the +Tcl_ExprObj( + Tcl_Interp *interp, /* Context in which to evaluate the * expression. */ - register Tcl_Obj *objPtr; /* Points to Tcl object containing - * expression to evaluate. */ - Tcl_Obj **resultPtrPtr; /* Where the Tcl_Obj* that is the expression + register Tcl_Obj *objPtr, /* Points to Tcl object containing expression + * to evaluate. */ + Tcl_Obj **resultPtrPtr) /* Where the Tcl_Obj* that is the expression * result is stored if no errors occur. */ { Interp *iPtr = (Interp *) interp; - CompileEnv compEnv; /* Compilation environment structure - * allocated in frame. */ - LiteralTable *localTablePtr = &(compEnv.localLitTable); + CompileEnv compEnv; /* Compilation environment structure allocated + * in frame. */ register ByteCode *codePtr = NULL; - /* Tcl Internal type of bytecode. - * Initialized to avoid compiler warning. */ - Tcl_Obj *saveObjPtr; - char *string; - int length, result; + /* Tcl Internal type of bytecode. Initialized + * to avoid compiler warning. */ + int result; /* - * First handle some common expressions specially. + * Execute the expression after first saving the interpreter's result. */ - string = Tcl_GetStringFromObj(objPtr, &length); - if (length == 1) { - if (*string == '0') { - *resultPtrPtr = Tcl_NewLongObj(0); - Tcl_IncrRefCount(*resultPtrPtr); - return TCL_OK; - } else if (*string == '1') { - *resultPtrPtr = Tcl_NewLongObj(1); - Tcl_IncrRefCount(*resultPtrPtr); - return TCL_OK; - } - } else if ((length == 2) && (*string == '!')) { - if (*(string+1) == '0') { - *resultPtrPtr = Tcl_NewLongObj(1); - Tcl_IncrRefCount(*resultPtrPtr); - return TCL_OK; - } else if (*(string+1) == '1') { - *resultPtrPtr = Tcl_NewLongObj(0); - Tcl_IncrRefCount(*resultPtrPtr); - return TCL_OK; - } - } - - /* - * Compile and execute the expression after saving the interp's result. - */ - - saveObjPtr = Tcl_GetObjResult(interp); + Tcl_Obj *saveObjPtr = Tcl_GetObjResult(interp); Tcl_IncrRefCount(saveObjPtr); /* * Get the expression ByteCode from the object. If it exists, make sure it * is valid in the current context. */ - if (objPtr->typePtr == &exprCodeType) { - Namespace *namespacePtr = iPtr->varFramePtr ? - iPtr->varFramePtr->nsPtr : iPtr->globalNsPtr; + Namespace *namespacePtr = iPtr->varFramePtr->nsPtr; - codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr; + codePtr = (ByteCode *) objPtr->internalRep.twoPtrValue.ptr1; if (((Interp *) *codePtr->interpHandle != iPtr) - || (codePtr->compileEpoch != iPtr->compileEpoch) - || (codePtr->nsPtr != namespacePtr) - || (codePtr->nsEpoch != namespacePtr->resolverEpoch)) { + || (codePtr->compileEpoch != iPtr->compileEpoch) + || (codePtr->nsPtr != namespacePtr) + || (codePtr->nsEpoch != namespacePtr->resolverEpoch)) { objPtr->typePtr->freeIntRepProc(objPtr); objPtr->typePtr = (Tcl_ObjType *) NULL; } } if (objPtr->typePtr != &exprCodeType) { -#ifndef TCL_TIP280 - TclInitCompileEnv(interp, &compEnv, string, length); -#else - /* TIP #280 : No invoker (yet) - Expression compilation */ - TclInitCompileEnv(interp, &compEnv, string, length, NULL, 0); -#endif - result = TclCompileExpr(interp, string, length, &compEnv); - /* - * Free the compilation environment's literal table bucket array if - * it was dynamically allocated. + * TIP #280: No invoker (yet) - Expression compilation. */ - if (localTablePtr->buckets != localTablePtr->staticBuckets) { - ckfree((char *) localTablePtr->buckets); - } - - if (result != TCL_OK) { - /* - * Compilation errors. Free storage allocated for compilation. - */ + int length; + const char *string = TclGetStringFromObj(objPtr, &length); -#ifdef TCL_COMPILE_DEBUG - TclVerifyLocalLiteralTable(&compEnv); -#endif /*TCL_COMPILE_DEBUG*/ - - TclFreeCompileEnv(&compEnv); - goto done; - } + TclInitCompileEnv(interp, &compEnv, string, length, NULL, 0); + TclCompileExpr(interp, string, length, &compEnv, 0); /* - * Successful compilation. If the expression yielded no - * instructions, push an zero object as the expression's result. + * Successful compilation. If the expression yielded no instructions, + * push an zero object as the expression's result. */ - + if (compEnv.codeNext == compEnv.codeStart) { - TclEmitPush(TclRegisterLiteral(&compEnv, "0", 1, /*onHeap*/ 0), - &compEnv); + TclEmitPush(TclRegisterNewLiteral(&compEnv, "0", 1), + &compEnv); } - + /* * Add a "done" instruction as the last instruction and change the - * object into a ByteCode object. Ownership of the literal objects - * and aux data items is given to the ByteCode object. + * object into a ByteCode object. Ownership of the literal objects and + * aux data items is given to the ByteCode object. */ - compEnv.numSrcBytes = iPtr->termOffset; TclEmitOpcode(INST_DONE, &compEnv); TclInitByteCodeObj(objPtr, &compEnv); objPtr->typePtr = &exprCodeType; TclFreeCompileEnv(&compEnv); - codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr; + codePtr = (ByteCode *) objPtr->internalRep.twoPtrValue.ptr1; #ifdef TCL_COMPILE_DEBUG if (tclTraceCompile == 2) { TclPrintByteCodeObj(interp, objPtr); + fflush(stdout); } #endif /* TCL_COMPILE_DEBUG */ } @@ -846,30 +1255,29 @@ Tcl_ExprObj(interp, objPtr, resultPtrPtr) * Increment the code's ref count while it is being executed. If * afterwards no references to it remain, free the code. */ - + codePtr->refCount++; result = TclExecuteByteCode(interp, codePtr); codePtr->refCount--; if (codePtr->refCount <= 0) { TclCleanupByteCode(codePtr); } - + /* - * If the expression evaluated successfully, store a pointer to its - * value object in resultPtrPtr then restore the old interpreter result. - * We increment the object's ref count to reflect the reference that we - * are returning to the caller. We also decrement the ref count of the - * interpreter's result object after calling Tcl_SetResult since we - * next store into that field directly. + * If the expression evaluated successfully, store a pointer to its value + * object in resultPtrPtr then restore the old interpreter result. We + * increment the object's ref count to reflect the reference that we are + * returning to the caller. We also decrement the ref count of the + * interpreter's result object after calling Tcl_SetResult since we next + * store into that field directly. */ - + if (result == TCL_OK) { *resultPtrPtr = iPtr->objResultPtr; Tcl_IncrRefCount(iPtr->objResultPtr); - + Tcl_SetObjResult(interp, saveObjPtr); } -done: TclDecrRefCount(saveObjPtr); return result; } @@ -883,14 +1291,14 @@ done: * bytecode. We do not copy the bytecode intrep. Instead, we * return without setting copyPtr->typePtr, so the copy is a plain * string copy of the expression value, and if it is to be used - * as a compiled expression, it will just need a recompile. + * as a compiled expression, it will just need a recompile. * * This makes sense, because with Tcl's copy-on-write practices, * the usual (only?) time Tcl_DuplicateObj() will be called is * when the copy is about to be modified, which would invalidate - * any copied bytecode anyway. The only reason it might make sense - * to copy the bytecode is if we had some modifying routines that - * operated directly on the intrep, like we do for lists and dicts. + * any copied bytecode anyway. The only reason it might make sense + * to copy the bytecode is if we had some modifying routines that + * operated directly on the intrep, like we do for lists and dicts. * * Results: * None. @@ -915,7 +1323,7 @@ DupExprCodeInternalRep( * FreeExprCodeInternalRep -- * * Part of the Tcl object type implementation for Tcl expression - * bytecode. Frees the storage allocated to hold the internal rep, + * bytecode. Frees the storage allocated to hold the internal rep, * unless ref counts indicate bytecode execution is still in progress. * * Results: @@ -930,14 +1338,13 @@ static void FreeExprCodeInternalRep( Tcl_Obj *objPtr) { - ByteCode *codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr; + ByteCode *codePtr = (ByteCode *) objPtr->internalRep.twoPtrValue.ptr1; codePtr->refCount--; if (codePtr->refCount <= 0) { TclCleanupByteCode(codePtr); } objPtr->typePtr = NULL; - objPtr->internalRep.otherValuePtr = NULL; } /* @@ -945,14 +1352,13 @@ FreeExprCodeInternalRep( * * TclCompEvalObj -- * - * This procedure evaluates the script contained in a Tcl_Obj by - * first compiling it and then passing it to TclExecuteByteCode. + * This procedure evaluates the script contained in a Tcl_Obj by first + * compiling it and then passing it to TclExecuteByteCode. * * Results: - * The return value is one of the return codes defined in tcl.h - * (such as TCL_OK), and interp->objResultPtr refers to a Tcl object - * that either contains the result of executing the code or an - * error message. + * The return value is one of the return codes defined in tcl.h (such as + * TCL_OK), and interp->objResultPtr refers to a Tcl object that either + * contains the result of executing the code or an error message. * * Side effects: * Almost certainly, depending on the ByteCode's instructions. @@ -961,174 +1367,327 @@ FreeExprCodeInternalRep( */ int -#ifndef TCL_TIP280 -TclCompEvalObj(interp, objPtr) -#else -TclCompEvalObj(interp, objPtr, invoker, word) -#endif - Tcl_Interp *interp; - Tcl_Obj *objPtr; -#ifdef TCL_TIP280 - CONST CmdFrame* invoker; /* Frame of the command doing the eval */ - int word; /* Index of the word which is in objPtr */ -#endif +TclCompEvalObj( + Tcl_Interp *interp, + Tcl_Obj *objPtr, + const CmdFrame *invoker, + int word) { register Interp *iPtr = (Interp *) interp; - register ByteCode* codePtr; /* Tcl Internal type of bytecode. */ - int oldCount = iPtr->cmdCount; /* Used to tell whether any commands - * at all were executed. */ - char *script; - int numSrcBytes; + register ByteCode *codePtr; /* Tcl Internal type of bytecode. */ int result; Namespace *namespacePtr; - /* - * Check that the interpreter is ready to execute scripts + * Check that the interpreter is ready to execute scripts. Note that we + * manage the interp's runlevel here: it is a small white lie (maybe), but + * saves a ++/-- pair at each invocation. Amazingly enough, the impact on + * performance is noticeable. */ iPtr->numLevels++; if (TclInterpReady(interp) == TCL_ERROR) { - iPtr->numLevels--; - return TCL_ERROR; + result = TCL_ERROR; + goto done; } - if (iPtr->varFramePtr != NULL) { - namespacePtr = iPtr->varFramePtr->nsPtr; - } else { - namespacePtr = iPtr->globalNsPtr; - } + namespacePtr = iPtr->varFramePtr->nsPtr; - /* - * If the object is not already of tclByteCodeType, compile it (and - * reset the compilation flags in the interpreter; this should be - * done after any compilation). - * Otherwise, check that it is "fresh" enough. + /* + * If the object is not already of tclByteCodeType, compile it (and reset + * the compilation flags in the interpreter; this should be done after any + * compilation). Otherwise, check that it is "fresh" enough. */ - if (objPtr->typePtr != &tclByteCodeType) { - recompileObj: - iPtr->errorLine = 1; - -#ifdef TCL_TIP280 - /* TIP #280. Remember the invoker for a moment in the interpreter - * structures so that the byte code compiler can pick it up when - * initializing the compilation environment, i.e. the extended - * location information. - */ - - iPtr->invokeCmdFramePtr = invoker; - iPtr->invokeWord = word; -#endif - result = tclByteCodeType.setFromAnyProc(interp, objPtr); -#ifdef TCL_TIP280 - iPtr->invokeCmdFramePtr = NULL; -#endif - - if (result != TCL_OK) { - iPtr->numLevels--; - return result; - } - codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr; - } else { + if (objPtr->typePtr == &tclByteCodeType) { /* - * Make sure the Bytecode hasn't been invalidated by, e.g., someone - * redefining a command with a compile procedure (this might make the - * compiled code wrong). - * The object needs to be recompiled if it was compiled in/for a - * different interpreter, or for a different namespace, or for the - * same namespace but with different name resolution rules. - * Precompiled objects, however, are immutable and therefore - * they are not recompiled, even if the epoch has changed. + * Make sure the Bytecode hasn't been invalidated by, e.g., someone + * redefining a command with a compile procedure (this might make the + * compiled code wrong). The object needs to be recompiled if it was + * compiled in/for a different interpreter, or for a different + * namespace, or for the same namespace but with different name + * resolution rules. Precompiled objects, however, are immutable and + * therefore they are not recompiled, even if the epoch has changed. * * To be pedantically correct, we should also check that the * originating procPtr is the same as the current context procPtr - * (assuming one exists at all - none for global level). This - * code is #def'ed out because [info body] was changed to never - * return a bytecode type object, which should obviate us from - * the extra checks here. + * (assuming one exists at all - none for global level). This code is + * #def'ed out because [info body] was changed to never return a + * bytecode type object, which should obviate us from the extra checks + * here. */ - codePtr = (ByteCode *) objPtr->internalRep.otherValuePtr; + + codePtr = (ByteCode *) objPtr->internalRep.twoPtrValue.ptr1; if (((Interp *) *codePtr->interpHandle != iPtr) - || (codePtr->compileEpoch != iPtr->compileEpoch) -#ifdef CHECK_PROC_ORIGINATION /* [Bug: 3412 Pedantic] */ - || (codePtr->procPtr != NULL && !(iPtr->varFramePtr && - iPtr->varFramePtr->procPtr == codePtr->procPtr)) -#endif - || (codePtr->nsPtr != namespacePtr) - || (codePtr->nsEpoch != namespacePtr->resolverEpoch)) { - if (codePtr->flags & TCL_BYTECODE_PRECOMPILED) { - if ((Interp *) *codePtr->interpHandle != iPtr) { - panic("Tcl_EvalObj: compiled script jumped interps"); - } - codePtr->compileEpoch = iPtr->compileEpoch; - } else { + || (codePtr->compileEpoch != iPtr->compileEpoch) + || (codePtr->nsPtr != namespacePtr) + || (codePtr->nsEpoch != namespacePtr->resolverEpoch)) { + if (codePtr->flags & TCL_BYTECODE_PRECOMPILED) { + if ((Interp *) *codePtr->interpHandle != iPtr) { + Tcl_Panic("Tcl_EvalObj: compiled script jumped interps"); + } + codePtr->compileEpoch = iPtr->compileEpoch; + } else { /* - * This byteCode is invalid: free it and recompile + * This byteCode is invalid: free it and recompile. */ - tclByteCodeType.freeIntRepProc(objPtr); + + objPtr->typePtr->freeIntRepProc(objPtr); goto recompileObj; } } - } - /* - * Execute the commands. If the code was compiled from an empty string, - * don't bother executing the code. - */ + /* + * #280. + * Literal sharing fix. This part of the fix is not required by 8.4 + * because it eval-directs any literals, so just saving the argument + * locations per command in bytecode is enough, embedded 'eval' + * commands, etc. get the correct information. + * + * It had be backported for 8.5 because we can force the separate + * compiling of a literal (in a proc body) by putting it into a control + * command with dynamic pieces, and then such literal may be shared + * and require their line-information to be reset, as for 8.6, as + * described below. + * + * In 8.6 all the embedded script are compiled, and the resulting + * bytecode stored in the literal. Now the shared literal has bytecode + * with location data for _one_ particular location this literal is + * found at. If we get executed from a different location the bytecode + * has to be recompiled to get the correct locations. Not doing this + * will execute the saved bytecode with data for a different location, + * causing 'info frame' to point to the wrong place in the sources. + * + * Future optimizations ... + * (1) Save the location data (ExtCmdLoc) keyed by start line. In that + * case we recompile once per location of the literal, but not + * continously, because the moment we have all locations we do not + * need to recompile any longer. + * + * (2) Alternative: Do not recompile, tell the execution engine the + * offset between saved starting line and actual one. Then modify + * the users to adjust the locations they have by this offset. + * + * (3) Alternative 2: Do not fully recompile, adjust just the location + * information. + */ + + if (invoker) { + Tcl_HashEntry *hePtr = + Tcl_FindHashEntry(iPtr->lineBCPtr, (char *) codePtr); + + if (hePtr) { + ExtCmdLoc *eclPtr = Tcl_GetHashValue(hePtr); + int redo = 0; + CmdFrame *ctxPtr = TclStackAlloc(interp,sizeof(CmdFrame)); + + *ctxPtr = *invoker; + + if (invoker->type == TCL_LOCATION_BC) { + /* + * Note: Type BC => ctx.data.eval.path is not used. + * ctx.data.tebc.codePtr used instead + */ + + TclGetSrcInfoForPc(ctxPtr); + if (ctxPtr->type == TCL_LOCATION_SOURCE) { + /* + * The reference made by 'TclGetSrcInfoForPc' is + * dead. + */ + + Tcl_DecrRefCount(ctxPtr->data.eval.path); + ctxPtr->data.eval.path = NULL; + } + } + + if (word < ctxPtr->nline) { + /* + * Note: We do not care if the line[word] is -1. This + * is a difference and requires a recompile (location + * changed from absolute to relative, literal is used + * fixed and through variable) + * + * Example: + * test info-32.0 using literal of info-24.8 + * (dict with ... vs set body ...). + */ + + redo = ((eclPtr->type == TCL_LOCATION_SOURCE) + && (eclPtr->start != ctxPtr->line[word])) + || ((eclPtr->type == TCL_LOCATION_BC) + && (ctxPtr->type == TCL_LOCATION_SOURCE)); + } + + TclStackFree(interp, ctxPtr); + + if (redo) { + goto recompileObj; + } + } + } - numSrcBytes = codePtr->numSrcBytes; - if ((numSrcBytes > 0) || (codePtr->flags & TCL_BYTECODE_PRECOMPILED)) { /* * Increment the code's ref count while it is being executed. If * afterwards no references to it remain, free the code. */ - + + runCompiledObj: codePtr->refCount++; result = TclExecuteByteCode(interp, codePtr); codePtr->refCount--; if (codePtr->refCount <= 0) { TclCleanupByteCode(codePtr); } - } else { - result = TCL_OK; + goto done; } - iPtr->numLevels--; + recompileObj: + iPtr->errorLine = 1; /* - * If no commands at all were executed, check for asynchronous - * handlers so that they at least get one change to execute. - * This is needed to handle event loops written in Tcl with - * empty bodies. + * TIP #280. Remember the invoker for a moment in the interpreter + * structures so that the byte code compiler can pick it up when + * initializing the compilation environment, i.e. the extended location + * information. */ - if ((oldCount == iPtr->cmdCount) && Tcl_AsyncReady()) { - result = Tcl_AsyncInvoke(interp, result); - + iPtr->invokeCmdFramePtr = invoker; + iPtr->invokeWord = word; + tclByteCodeType.setFromAnyProc(interp, objPtr); + iPtr->invokeCmdFramePtr = NULL; + codePtr = (ByteCode *) objPtr->internalRep.twoPtrValue.ptr1; + goto runCompiledObj; + + done: + iPtr->numLevels--; + return result; +} + +/* + *---------------------------------------------------------------------- + * + * TclIncrObj -- + * + * Increment an integeral value in a Tcl_Obj by an integeral value held + * in another Tcl_Obj. Caller is responsible for making sure we can + * update the first object. + * + * Results: + * TCL_ERROR if either object is non-integer, and TCL_OK otherwise. On + * error, an error message is left in the interpreter (if it is not NULL, + * of course). + * + * Side effects: + * valuePtr gets the new incrmented value. + * + *---------------------------------------------------------------------- + */ +int +TclIncrObj( + Tcl_Interp *interp, + Tcl_Obj *valuePtr, + Tcl_Obj *incrPtr) +{ + ClientData ptr1, ptr2; + int type1, type2; + mp_int value, incr; + + if (Tcl_IsShared(valuePtr)) { + Tcl_Panic("%s called with shared object", "TclIncrObj"); + } + + if (GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) { /* - * If an error occurred, record information about what was being - * executed when the error occurred. + * Produce error message (reparse?!) */ - - if ((result == TCL_ERROR) && !(iPtr->flags & ERR_ALREADY_LOGGED)) { - script = Tcl_GetStringFromObj(objPtr, &numSrcBytes); - Tcl_LogCommandInfo(interp, script, script, numSrcBytes); + + return TclGetIntFromObj(interp, valuePtr, &type1); + } + if (GetNumberFromObj(NULL, incrPtr, &ptr2, &type2) != TCL_OK) { + /* + * Produce error message (reparse?!) + */ + + TclGetIntFromObj(interp, incrPtr, &type1); + Tcl_AddErrorInfo(interp, "\n (reading increment)"); + return TCL_ERROR; + } + + if ((type1 == TCL_NUMBER_LONG) && (type2 == TCL_NUMBER_LONG)) { + long augend = *((const long *) ptr1); + long addend = *((const long *) ptr2); + long sum = augend + addend; + + /* + * Overflow when (augend and sum have different sign) and (augend and + * addend have the same sign). This is encapsulated in the Overflowing + * macro. + */ + + if (!Overflowing(augend, addend, sum)) { + TclSetLongObj(valuePtr, sum); + return TCL_OK; } +#ifndef NO_WIDE_TYPE + { + Tcl_WideInt w1 = (Tcl_WideInt) augend; + Tcl_WideInt w2 = (Tcl_WideInt) addend; + + /* + * We know the sum value is outside the long range, so we use the + * macro form that doesn't range test again. + */ + + TclSetWideIntObj(valuePtr, w1 + w2); + return TCL_OK; + } +#endif } - /* - * Set the interpreter's termOffset member to the offset of the - * character just after the last one executed. We approximate the offset - * of the last character executed by using the number of characters - * compiled. - */ + if ((type1 == TCL_NUMBER_DOUBLE) || (type1 == TCL_NUMBER_NAN)) { + /* + * Produce error message (reparse?!) + */ - iPtr->termOffset = numSrcBytes; - iPtr->flags &= ~ERR_ALREADY_LOGGED; + return TclGetIntFromObj(interp, valuePtr, &type1); + } + if ((type2 == TCL_NUMBER_DOUBLE) || (type2 == TCL_NUMBER_NAN)) { + /* + * Produce error message (reparse?!) + */ - return result; + TclGetIntFromObj(interp, incrPtr, &type1); + Tcl_AddErrorInfo(interp, "\n (reading increment)"); + return TCL_ERROR; + } + +#ifndef NO_WIDE_TYPE + if ((type1 != TCL_NUMBER_BIG) && (type2 != TCL_NUMBER_BIG)) { + Tcl_WideInt w1, w2, sum; + + TclGetWideIntFromObj(NULL, valuePtr, &w1); + TclGetWideIntFromObj(NULL, incrPtr, &w2); + sum = w1 + w2; + + /* + * Check for overflow. + */ + + if (!Overflowing(w1, w2, sum)) { + Tcl_SetWideIntObj(valuePtr, sum); + return TCL_OK; + } + } +#endif + + Tcl_TakeBignumFromObj(interp, valuePtr, &value); + Tcl_GetBignumFromObj(interp, incrPtr, &incr); + mp_add(&value, &incr, &value); + mp_clear(&incr); + Tcl_SetBignumObj(valuePtr, &value); + return TCL_OK; } /* @@ -1136,59 +1695,86 @@ TclCompEvalObj(interp, objPtr, invoker, word) * * TclExecuteByteCode -- * - * This procedure executes the instructions of a ByteCode structure. - * It returns when a "done" instruction is executed or an error occurs. + * This procedure executes the instructions of a ByteCode structure. It + * returns when a "done" instruction is executed or an error occurs. * * Results: - * The return value is one of the return codes defined in tcl.h - * (such as TCL_OK), and interp->objResultPtr refers to a Tcl object - * that either contains the result of executing the code or an - * error message. + * The return value is one of the return codes defined in tcl.h (such as + * TCL_OK), and interp->objResultPtr refers to a Tcl object that either + * contains the result of executing the code or an error message. * * Side effects: * Almost certainly, depending on the ByteCode's instructions. * *---------------------------------------------------------------------- */ - -static int -TclExecuteByteCode(interp, codePtr) - Tcl_Interp *interp; /* Token for command interpreter. */ - ByteCode *codePtr; /* The bytecode sequence to interpret. */ + +int +TclExecuteByteCode( + Tcl_Interp *interp, /* Token for command interpreter. */ + ByteCode *codePtr) /* The bytecode sequence to interpret. */ { - Interp *iPtr = (Interp *) interp; - ExecEnv *eePtr = iPtr->execEnvPtr; - /* Points to the execution environment. */ - register Tcl_Obj **stackPtr = eePtr->stackPtr; - /* Cached evaluation stack base pointer. */ - register int stackTop = eePtr->stackTop; - /* Cached top index of evaluation stack. */ + /* + * Compiler cast directive - not a real variable. + * Interp *iPtr = (Interp *) interp; + */ +#define iPtr ((Interp *) interp) + + /* + * Check just the read-traced/write-traced bit of a variable. + */ + +#define ReadTraced(varPtr) ((varPtr)->flags & VAR_TRACED_READ) +#define WriteTraced(varPtr) ((varPtr)->flags & VAR_TRACED_WRITE) + + /* + * Constants: variables that do not change during the execution, used + * sporadically. + */ + + ExecStack *esPtr; + Tcl_Obj **initTosPtr; /* Stack top at start of execution. */ + ptrdiff_t *initCatchTop; /* Catch stack top at start of execution. */ + Var *compiledLocals; + Namespace *namespacePtr; + CmdFrame *bcFramePtr; /* TIP #280: Structure for tracking lines. */ + Tcl_Obj **constants = &iPtr->execEnvPtr->constants[0]; + + /* + * Globals: variables that store state, must remain valid at all times. + */ + + ptrdiff_t *catchTop; + register Tcl_Obj **tosPtr; /* Cached pointer to top of evaluation + * stack. */ register unsigned char *pc = codePtr->codeStart; /* The current program counter. */ - int opnd; /* Current instruction's operand byte(s). */ - int pcAdjustment; /* Hold pc adjustment after instruction. */ - int initStackTop = stackTop;/* Stack top at start of execution. */ - ExceptionRange *rangePtr; /* Points to closest loop or catch exception - * range enclosing the pc. Used by various - * instructions and processCatch to - * process break, continue, and errors. */ - int result = TCL_OK; /* Return code returned after execution. */ - int storeFlags; - Tcl_Obj *valuePtr, *value2Ptr, *objPtr; - char *bytes; - int length; - long i = 0; /* Init. avoids compiler warning. */ - Tcl_WideInt w; + int instructionCount = 0; /* Counter that is used to work out when to + * call Tcl_AsyncReady() */ + Tcl_Obj *expandNestList = NULL; + int checkInterp = 0; /* Indicates when a check of interp readyness + * is necessary. Set by CACHE_STACK_INFO() */ + + /* + * Transfer variables - needed only between opcodes, but not while + * executing an instruction. + */ + register int cleanup; Tcl_Obj *objResultPtr; - char *part1, *part2; - Var *varPtr, *arrayPtr; - CallFrame *varFramePtr = iPtr->varFramePtr; -#ifdef TCL_TIP280 - /* TIP #280 : Structures for tracking lines */ - CmdFrame bcFrame; -#endif + /* + * Result variable - needed only when going to checkForcatch or other + * error handlers; also used as local in some opcodes. + */ + + int result = TCL_OK; /* Return code returned after execution. */ + + /* + * Locals - variables that are used within opcodes or bounded sections of + * the file (jumps between opcodes within a family). + * NOTE: These are now defined locally where needed. + */ #ifdef TCL_COMPILE_DEBUG int traceInstructions = (tclTraceExec == 3); @@ -1197,307 +1783,604 @@ TclExecuteByteCode(interp, codePtr) char *curInstName = NULL; /* - * This procedure uses a stack to hold information about catch commands. - * This information is the current operand stack top when starting to - * execute the code for each catch command. It starts out with stack- - * allocated space but uses dynamically-allocated storage if needed. + * The execution uses a unified stack: first the catch stack, immediately + * above it a CmdFrame, then the execution stack. + * + * Make sure the catch stack is large enough to hold the maximum number of + * catch commands that could ever be executing at the same time (this will + * be no more than the exception range array's depth). Make sure the + * execution stack is large enough to execute this ByteCode. */ -#define STATIC_CATCH_STACK_SIZE 4 - int (catchStackStorage[STATIC_CATCH_STACK_SIZE]); - int *catchStackPtr = catchStackStorage; - int catchTop = -1; - -#ifdef TCL_TIP280 - /* TIP #280 : Initialize the frame. Do not push it yet. */ - - bcFrame.type = ((codePtr->flags & TCL_BYTECODE_PRECOMPILED) - ? TCL_LOCATION_PREBC - : TCL_LOCATION_BC); - bcFrame.level = (iPtr->cmdFramePtr == NULL ? - 1 : - iPtr->cmdFramePtr->level + 1); - bcFrame.framePtr = iPtr->framePtr; - bcFrame.nextPtr = iPtr->cmdFramePtr; - bcFrame.nline = 0; - bcFrame.line = NULL; - - bcFrame.data.tebc.codePtr = codePtr; - bcFrame.data.tebc.pc = NULL; - bcFrame.cmd.str.cmd = NULL; - bcFrame.cmd.str.len = 0; -#endif + catchTop = initCatchTop = (ptrdiff_t *) ( + GrowEvaluationStack(iPtr->execEnvPtr, + (sizeof(CmdFrame) + sizeof(Tcl_Obj *) - 1)/sizeof(Tcl_Obj *) + + codePtr->maxExceptDepth + codePtr->maxStackDepth, 0) - 1); + bcFramePtr = (CmdFrame *) (initCatchTop + codePtr->maxExceptDepth + 1); + tosPtr = initTosPtr = ((Tcl_Obj **) (bcFramePtr + 1)) - 1; + esPtr = iPtr->execEnvPtr->execStackPtr; + + /* + * TIP #280: Initialize the frame. Do not push it yet. + */ + + bcFramePtr->type = ((codePtr->flags & TCL_BYTECODE_PRECOMPILED) + ? TCL_LOCATION_PREBC : TCL_LOCATION_BC); + bcFramePtr->level = (iPtr->cmdFramePtr ? iPtr->cmdFramePtr->level+1 : 1); + bcFramePtr->framePtr = iPtr->framePtr; + bcFramePtr->nextPtr = iPtr->cmdFramePtr; + bcFramePtr->nline = 0; + bcFramePtr->line = NULL; + + bcFramePtr->data.tebc.codePtr = codePtr; + bcFramePtr->data.tebc.pc = NULL; + bcFramePtr->cmd.str.cmd = NULL; + bcFramePtr->cmd.str.len = 0; #ifdef TCL_COMPILE_DEBUG if (tclTraceExec >= 2) { PrintByteCodeInfo(codePtr); - fprintf(stdout, " Starting stack top=%d\n", eePtr->stackTop); + fprintf(stdout, " Starting stack top=%d\n", (int) CURR_DEPTH); fflush(stdout); } - opnd = 0; /* Init. avoids compiler warning. */ #endif - + #ifdef TCL_COMPILE_STATS iPtr->stats.numExecutions++; #endif - /* - * Make sure the catch stack is large enough to hold the maximum number - * of catch commands that could ever be executing at the same time. This - * will be no more than the exception range array's depth. - */ - - if (codePtr->maxExceptDepth > STATIC_CATCH_STACK_SIZE) { - catchStackPtr = (int *) - ckalloc(codePtr->maxExceptDepth * sizeof(int)); - } - - /* - * Make sure the stack has enough room to execute this ByteCode. - */ - - while ((stackTop + codePtr->maxStackDepth) > eePtr->stackEnd) { - GrowEvaluationStack(eePtr); - stackPtr = eePtr->stackPtr; - } + namespacePtr = iPtr->varFramePtr->nsPtr; + compiledLocals = iPtr->varFramePtr->compiledLocals; /* - * Loop executing instructions until a "done" instruction, a - * TCL_RETURN, or some error. + * Loop executing instructions until a "done" instruction, a TCL_RETURN, + * or some error. */ goto cleanup0; - /* - * Targets for standard instruction endings; unrolled - * for speed in the most frequent cases (instructions that - * consume up to two stack elements). + * Targets for standard instruction endings; unrolled for speed in the + * most frequent cases (instructions that consume up to two stack + * elements). * - * This used to be a "for(;;)" loop, with each instruction doing - * its own cleanup. + * This used to be a "for(;;)" loop, with each instruction doing its own + * cleanup. */ - + + { + Tcl_Obj *valuePtr; + cleanupV_pushObjResultPtr: - switch (cleanup) { - case 0: - stackPtr[++stackTop] = (objResultPtr); + switch (cleanup) { + case 0: + *(++tosPtr) = (objResultPtr); goto cleanup0; - default: + default: cleanup -= 2; while (cleanup--) { valuePtr = POP_OBJECT(); TclDecrRefCount(valuePtr); } - case 2: - cleanup2_pushObjResultPtr: + case 2: + cleanup2_pushObjResultPtr: valuePtr = POP_OBJECT(); TclDecrRefCount(valuePtr); - case 1: - cleanup1_pushObjResultPtr: - valuePtr = stackPtr[stackTop]; + case 1: + cleanup1_pushObjResultPtr: + valuePtr = OBJ_AT_TOS; TclDecrRefCount(valuePtr); - } - stackPtr[stackTop] = objResultPtr; - goto cleanup0; - + } + OBJ_AT_TOS = objResultPtr; + goto cleanup0; + cleanupV: - switch (cleanup) { - default: + switch (cleanup) { + default: cleanup -= 2; while (cleanup--) { valuePtr = POP_OBJECT(); TclDecrRefCount(valuePtr); } - case 2: - cleanup2: + case 2: + cleanup2: valuePtr = POP_OBJECT(); TclDecrRefCount(valuePtr); - case 1: - cleanup1: + case 1: + cleanup1: valuePtr = POP_OBJECT(); TclDecrRefCount(valuePtr); - case 0: + case 0: /* - * We really want to do nothing now, but this is needed - * for some compilers (SunPro CC) + * We really want to do nothing now, but this is needed for some + * compilers (SunPro CC). */ + break; + } } + cleanup0: - cleanup0: - #ifdef TCL_COMPILE_DEBUG - ValidatePcAndStackTop(codePtr, pc, stackTop, initStackTop); + /* + * Skip the stack depth check if an expansion is in progress. + */ + + ValidatePcAndStackTop(codePtr, pc, CURR_DEPTH, 0, + /*checkStack*/ expandNestList == NULL); if (traceInstructions) { - fprintf(stdout, "%2d: %2d ", iPtr->numLevels, stackTop); + fprintf(stdout, "%2d: %2d ", iPtr->numLevels, (int) CURR_DEPTH); TclPrintInstruction(codePtr, pc); fflush(stdout); } #endif /* TCL_COMPILE_DEBUG */ - -#ifdef TCL_COMPILE_STATS + +#ifdef TCL_COMPILE_STATS iPtr->stats.instructionCount[*pc]++; #endif + /* + * Check for asynchronous handlers [Bug 746722]; we do the check every + * ASYNC_CHECK_COUNT_MASK instruction, of the form (2**n-1). + */ + + if ((instructionCount++ & ASYNC_CHECK_COUNT_MASK) == 0) { + /* + * Check for asynchronous handlers [Bug 746722]; we do the check every + * ASYNC_CHECK_COUNT_MASK instruction, of the form (2**n-<1). + */ + + if (TclAsyncReady(iPtr)) { + int localResult; + + DECACHE_STACK_INFO(); + localResult = Tcl_AsyncInvoke(interp, result); + CACHE_STACK_INFO(); + if (localResult == TCL_ERROR) { + result = localResult; + goto checkForCatch; + } + } + if (TclLimitReady(iPtr->limit)) { + int localResult; + + DECACHE_STACK_INFO(); + localResult = Tcl_LimitCheck(interp); + CACHE_STACK_INFO(); + if (localResult == TCL_ERROR) { + result = localResult; + goto checkForCatch; + } + } + } + TCL_DTRACE_INST_NEXT(); + /* + * These two instructions account for 26% of all instructions (according + * to measurements on tclbench by Ben Vitale + * [http://www.cs.toronto.edu/syslab/pubs/tcl2005-vitale-zaleski.pdf] + * Resolving them before the switch reduces the cost of branch + * mispredictions, seems to improve runtime by 5% to 15%, and (amazingly!) + * reduces total obj size. + */ + + if (*pc == INST_LOAD_SCALAR1) { + goto instLoadScalar1; + } else if (*pc == INST_PUSH1) { + goto instPush1Peephole; + } + switch (*pc) { + case INST_SYNTAX: + case INST_RETURN_IMM: { + int code = TclGetInt4AtPtr(pc+1); + int level = TclGetUInt4AtPtr(pc+5); + + /* + * OBJ_AT_TOS is returnOpts, OBJ_UNDER_TOS is resultObjPtr. + */ + + TRACE(("%u %u => ", code, level)); + result = TclProcessReturn(interp, code, level, OBJ_AT_TOS); + if (result == TCL_OK) { + TRACE_APPEND(("continuing to next instruction (result=\"%.30s\")", + O2S(objResultPtr))); + NEXT_INST_F(9, 1, 0); + } else { + Tcl_SetObjResult(interp, OBJ_UNDER_TOS); + if (*pc == INST_SYNTAX) { + iPtr->flags &= ~ERR_ALREADY_LOGGED; + } + cleanup = 2; + goto processExceptionReturn; + } + } + + case INST_RETURN_STK: + TRACE(("=> ")); + objResultPtr = POP_OBJECT(); + result = Tcl_SetReturnOptions(interp, OBJ_AT_TOS); + Tcl_DecrRefCount(OBJ_AT_TOS); + OBJ_AT_TOS = objResultPtr; + if (result == TCL_OK) { + TRACE_APPEND(("continuing to next instruction (result=\"%.30s\")", + O2S(objResultPtr))); + NEXT_INST_F(1, 0, 0); + } else { + Tcl_SetObjResult(interp, objResultPtr); + cleanup = 1; + goto processExceptionReturn; + } + case INST_DONE: - if (stackTop <= initStackTop) { - stackTop--; + if (tosPtr > initTosPtr) { + /* + * Set the interpreter's object result to point to the topmost + * object from the stack, and check for a possible [catch]. The + * stackTop's level and refCount will be handled by "processCatch" + * or "abnormalReturn". + */ + + Tcl_SetObjResult(interp, OBJ_AT_TOS); +#ifdef TCL_COMPILE_DEBUG + TRACE_WITH_OBJ(("=> return code=%d, result=", result), + iPtr->objResultPtr); + if (traceInstructions) { + fprintf(stdout, "\n"); + } +#endif + goto checkForCatch; + } else { + (void) POP_OBJECT(); goto abnormalReturn; } - + + case INST_PUSH1: + instPush1Peephole: + PUSH_OBJECT(codePtr->objArrayPtr[TclGetUInt1AtPtr(pc+1)]); + TRACE_WITH_OBJ(("%u => ", TclGetInt1AtPtr(pc+1)), OBJ_AT_TOS); + pc += 2; +#if !TCL_COMPILE_DEBUG /* - * Set the interpreter's object result to point to the - * topmost object from the stack, and check for a possible - * [catch]. The stackTop's level and refCount will be handled - * by "processCatch" or "abnormalReturn". + * Runtime peephole optimisation: check if we are pushing again. */ - valuePtr = stackPtr[stackTop]; - Tcl_SetObjResult(interp, valuePtr); -#ifdef TCL_COMPILE_DEBUG - TRACE_WITH_OBJ(("=> return code=%d, result=", result), - iPtr->objResultPtr); - if (traceInstructions) { - fprintf(stdout, "\n"); + if (*pc == INST_PUSH1) { + TCL_DTRACE_INST_NEXT(); + goto instPush1Peephole; } #endif - goto checkForCatch; - - case INST_PUSH1: - objResultPtr = codePtr->objArrayPtr[TclGetUInt1AtPtr(pc+1)]; - TRACE_WITH_OBJ(("%u => ", TclGetInt1AtPtr(pc+1)), objResultPtr); - NEXT_INST_F(2, 0, 1); + NEXT_INST_F(0, 0, 0); case INST_PUSH4: objResultPtr = codePtr->objArrayPtr[TclGetUInt4AtPtr(pc+1)]; TRACE_WITH_OBJ(("%u => ", TclGetUInt4AtPtr(pc+1)), objResultPtr); NEXT_INST_F(5, 0, 1); - case INST_POP: - TRACE_WITH_OBJ(("=> discarding "), stackPtr[stackTop]); + case INST_POP: { + Tcl_Obj *valuePtr; + + TRACE_WITH_OBJ(("=> discarding "), OBJ_AT_TOS); valuePtr = POP_OBJECT(); TclDecrRefCount(valuePtr); - NEXT_INST_F(1, 0, 0); - + + /* + * Runtime peephole optimisation: an INST_POP is scheduled at the end + * of most commands. If the next instruction is an INST_START_CMD, + * fall through to it. + */ + + pc++; +#if !TCL_COMPILE_DEBUG + if (*pc == INST_START_CMD) { + TCL_DTRACE_INST_NEXT(); + goto instStartCmdPeephole; + } +#endif + NEXT_INST_F(0, 0, 0); + } + + case INST_START_CMD: +#if !TCL_COMPILE_DEBUG + instStartCmdPeephole: +#endif + /* + * Remark that if the interpreter is marked for deletion its + * compileEpoch is modified, so that the epoch check also verifies + * that the interp is not deleted. If no outside call has been made + * since the last check, it is safe to omit the check. + */ + + iPtr->cmdCount += TclGetUInt4AtPtr(pc+5); + if (!checkInterp) { + instStartCmdOK: + NEXT_INST_F(9, 0, 0); + } else if (((codePtr->compileEpoch == iPtr->compileEpoch) + && (codePtr->nsEpoch == namespacePtr->resolverEpoch)) + || (codePtr->flags & TCL_BYTECODE_PRECOMPILED)) { + checkInterp = 0; + goto instStartCmdOK; + } else { + const char *bytes; + int length, opnd; + Tcl_Obj *newObjResultPtr; + + bytes = GetSrcInfoForPc(pc, codePtr, &length); + DECACHE_STACK_INFO(); + result = Tcl_EvalEx(interp, bytes, length, 0); + CACHE_STACK_INFO(); + if (result != TCL_OK) { + cleanup = 0; + if (result == TCL_ERROR) { + /* + * Tcl_EvalEx already did the task of logging + * the error to the stack trace for us, so set + * a flag to prevent the TEBC exception handling + * machinery from trying to do it again. + * Tcl Bug 2037338. See test execute-8.4. + */ + iPtr->flags |= ERR_ALREADY_LOGGED; + } + goto processExceptionReturn; + } + opnd = TclGetUInt4AtPtr(pc+1); + objResultPtr = Tcl_GetObjResult(interp); + TclNewObj(newObjResultPtr); + Tcl_IncrRefCount(newObjResultPtr); + iPtr->objResultPtr = newObjResultPtr; + NEXT_INST_V(opnd, 0, -1); + } + case INST_DUP: - objResultPtr = stackPtr[stackTop]; + objResultPtr = OBJ_AT_TOS; TRACE_WITH_OBJ(("=> "), objResultPtr); NEXT_INST_F(1, 0, 1); - case INST_OVER: - opnd = TclGetUInt4AtPtr( pc+1 ); - objResultPtr = stackPtr[ stackTop - opnd ]; + case INST_OVER: { + int opnd; + + opnd = TclGetUInt4AtPtr(pc+1); + objResultPtr = OBJ_AT_DEPTH(opnd); TRACE_WITH_OBJ(("=> "), objResultPtr); NEXT_INST_F(5, 0, 1); + } + + case INST_REVERSE: { + int opnd; + Tcl_Obj **a, **b; + + opnd = TclGetUInt4AtPtr(pc+1); + a = tosPtr-(opnd-1); + b = tosPtr; + while (a<b) { + Tcl_Obj *temp = *a; + *a = *b; + *b = temp; + a++; b--; + } + NEXT_INST_F(5, 0, 0); + } + + case INST_CONCAT1: { + int opnd, length, appendLen = 0; + char *bytes, *p; + Tcl_Obj **currPtr; - case INST_CONCAT1: opnd = TclGetUInt1AtPtr(pc+1); - { - int totalLen = 0; - - /* - * Peephole optimisation for appending an empty string. - * This enables replacing 'K $x [set x{}]' by '$x[set x{}]' - * for fastest execution. Avoid doing the optimisation for wide - * ints - a case where equal strings may refer to different values - * (see [Bug 1251791]). - */ - if ((opnd == 2) && (stackPtr[stackTop-1]->typePtr != &tclWideIntType)) { - Tcl_GetStringFromObj(stackPtr[stackTop], &length); - if (length == 0) { - /* Just drop the top item from the stack */ - NEXT_INST_F(2, 1, 0); - } + /* + * Compute the length to be appended. + */ + + for (currPtr=&OBJ_AT_DEPTH(opnd-2); + appendLen >= 0 && currPtr<=&OBJ_AT_TOS; currPtr++) { + bytes = TclGetStringFromObj(*currPtr, &length); + if (bytes != NULL) { + appendLen += length; + } + } + + if (appendLen < 0) { + /* TODO: convert panic to error ? */ + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); + } + + /* + * If nothing is to be appended, just return the first object by + * dropping all the others from the stack; this saves both the + * computation and copy of the string rep of the first object, + * enabling the fast '$x[set x {}]' idiom for 'K $x [set x {}]'. + */ + + if (appendLen == 0) { + TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr); + NEXT_INST_V(2, (opnd-1), 0); + } + + /* + * If the first object is shared, we need a new obj for the result; + * otherwise, we can reuse the first object. In any case, make sure it + * has enough room to accomodate all the concatenated bytes. Note that + * if it is unshared its bytes are copied by ckrealloc, so that we set + * the loop parameters to avoid copying them again: p points to the + * end of the already copied bytes, currPtr to the second object. + */ + + objResultPtr = OBJ_AT_DEPTH(opnd-1); + bytes = TclGetStringFromObj(objResultPtr, &length); + if (length + appendLen < 0) { + /* TODO: convert panic to error ? */ + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); + } +#if !TCL_COMPILE_DEBUG + if (bytes != tclEmptyStringRep && !Tcl_IsShared(objResultPtr)) { + TclFreeIntRep(objResultPtr); + objResultPtr->typePtr = NULL; + objResultPtr->bytes = ckrealloc(bytes, (length + appendLen + 1)); + objResultPtr->length = length + appendLen; + p = TclGetString(objResultPtr) + length; + currPtr = &OBJ_AT_DEPTH(opnd - 2); + } else { +#endif + p = (char *) ckalloc((unsigned) (length + appendLen + 1)); + TclNewObj(objResultPtr); + objResultPtr->bytes = p; + objResultPtr->length = length + appendLen; + currPtr = &OBJ_AT_DEPTH(opnd - 1); +#if !TCL_COMPILE_DEBUG + } +#endif + + /* + * Append the remaining characters. + */ + + for (; currPtr <= &OBJ_AT_TOS; currPtr++) { + bytes = TclGetStringFromObj(*currPtr, &length); + if (bytes != NULL) { + memcpy(p, bytes, (size_t) length); + p += length; } + } + *p = '\0'; + TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr); + NEXT_INST_V(2, opnd, 1); + } + + case INST_EXPAND_START: { + /* + * Push an element to the expandNestList. This records the current + * stack depth - i.e., the point in the stack where the expanded + * command starts. + * + * Use a Tcl_Obj as linked list element; slight mem waste, but faster + * allocation than ckalloc. This also abuses the Tcl_Obj structure, as + * we do not define a special tclObjType for it. It is not dangerous + * as the obj is never passed anywhere, so that all manipulations are + * performed here and in INST_INVOKE_EXPANDED (in case of an expansion + * error, also in INST_EXPAND_STKTOP). + */ + + Tcl_Obj *objPtr; + + TclNewObj(objPtr); + objPtr->internalRep.twoPtrValue.ptr1 = (VOID *) CURR_DEPTH; + objPtr->internalRep.twoPtrValue.ptr2 = (VOID *) expandNestList; + expandNestList = objPtr; + NEXT_INST_F(1, 0, 0); + } + + case INST_EXPAND_STKTOP: { + int objc, length, i; + Tcl_Obj **objv, *valuePtr; + ptrdiff_t moved; + + /* + * Make sure that the element at stackTop is a list; if not, just + * leave with an error. Note that the element from the expand list + * will be removed at checkForCatch. + */ + + valuePtr = OBJ_AT_TOS; + if (TclListObjGetElements(interp, valuePtr, &objc, &objv) != TCL_OK){ + TRACE_WITH_OBJ(("%.30s => ERROR: ", O2S(valuePtr)), + Tcl_GetObjResult(interp)); + result = TCL_ERROR; + goto checkForCatch; + } + (void) POP_OBJECT(); + + /* + * Make sure there is enough room in the stack to expand this list + * *and* process the rest of the command (at least up to the next + * argument expansion or command end). The operand is the current + * stack depth, as seen by the compiler. + */ + + length = objc + (codePtr->maxStackDepth - TclGetInt4AtPtr(pc+1)); + DECACHE_STACK_INFO(); + moved = (GrowEvaluationStack(iPtr->execEnvPtr, length, 1) - 1) + - (Tcl_Obj **) initCatchTop; + + if (moved) { /* - * Concatenate strings (with no separators) from the top - * opnd items on the stack starting with the deepest item. - * First, determine how many characters are needed. + * Change the global data to point to the new stack. */ - for (i = (stackTop - (opnd-1)); - totalLen >= 0 && i <= stackTop; i++) { - bytes = Tcl_GetStringFromObj(stackPtr[i], &length); - if (bytes != NULL) { - totalLen += length; - } - } + initCatchTop += moved; + catchTop += moved; + initTosPtr += moved; + tosPtr += moved; + esPtr = iPtr->execEnvPtr->execStackPtr; + } - if (totalLen < 0) { - Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", - INT_MAX); - } + /* + * Expand the list at stacktop onto the stack; free the list. Knowing + * that it has a freeIntRepProc we use Tcl_DecrRefCount(). + */ + + for (i = 0; i < objc; i++) { + PUSH_OBJECT(objv[i]); + } + + Tcl_DecrRefCount(valuePtr); + NEXT_INST_F(5, 0, 0); + } + + { + /* + * INVOCATION BLOCK + */ + int objc, pcAdjustment; + + case INST_INVOKE_EXPANDED: + { + Tcl_Obj *objPtr = expandNestList; + + expandNestList = (Tcl_Obj *) objPtr->internalRep.twoPtrValue.ptr2; + objc = CURR_DEPTH + - (ptrdiff_t) objPtr->internalRep.twoPtrValue.ptr1; + TclDecrRefCount(objPtr); + } + + if (objc) { + pcAdjustment = 1; + goto doInvocation; + } else { /* - * Initialize the new append string object by appending the - * strings of the opnd stack objects. Also pop the objects. + * Nothing was expanded, return {}. */ TclNewObj(objResultPtr); - if (totalLen > 0) { - char *p = (char *) ckalloc((unsigned) (totalLen + 1)); - objResultPtr->bytes = p; - objResultPtr->length = totalLen; - for (i = (stackTop - (opnd-1)); i <= stackTop; i++) { - valuePtr = stackPtr[i]; - bytes = Tcl_GetStringFromObj(valuePtr, &length); - if (bytes != NULL) { - memcpy((VOID *) p, (VOID *) bytes, - (size_t) length); - p += length; - } - } - *p = '\0'; - } - - TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr); - NEXT_INST_V(2, opnd, 1); + NEXT_INST_F(1, 0, 1); } - + case INST_INVOKE_STK4: - opnd = TclGetUInt4AtPtr(pc+1); + objc = TclGetUInt4AtPtr(pc+1); pcAdjustment = 5; goto doInvocation; case INST_INVOKE_STK1: - opnd = TclGetUInt1AtPtr(pc+1); + objc = TclGetUInt1AtPtr(pc+1); pcAdjustment = 2; - + doInvocation: { - int objc = opnd; /* The number of arguments. */ - Tcl_Obj **objv; /* The array of argument objects. */ - - /* - * We keep the stack reference count as a (char *), as that - * works nicely as a portable pointer-sized counter. - */ - - char **preservedStackRefCountPtr; - - /* - * Reference to memory block containing - * objv array (must be kept live throughout - * trace and command invokations.) - */ - - objv = &(stackPtr[stackTop - (objc-1)]); + Tcl_Obj **objv = &OBJ_AT_DEPTH(objc-1); #ifdef TCL_COMPILE_DEBUG if (tclTraceExec >= 2) { + int i; + if (traceInstructions) { strncpy(cmdNameBuf, TclGetString(objv[0]), 20); TRACE(("%u => call ", objc)); } else { - fprintf(stdout, "%d: (%u) invoking ", - iPtr->numLevels, - (unsigned int)(pc - codePtr->codeStart)); + fprintf(stdout, "%d: (%u) invoking ", iPtr->numLevels, + (unsigned)(pc - codePtr->codeStart)); } for (i = 0; i < objc; i++) { TclPrintObject(stdout, objv[i], 15); @@ -1508,142 +2391,189 @@ TclExecuteByteCode(interp, codePtr) } #endif /*TCL_COMPILE_DEBUG*/ - /* - * If trace procedures will be called, we need a - * command string to pass to TclEvalObjvInternal; note - * that a copy of the string will be made there to - * include the ending \0. - */ - - bytes = NULL; - length = 0; - if (iPtr->tracePtr != NULL) { - Trace *tracePtr, *nextTracePtr; - - for (tracePtr = iPtr->tracePtr; tracePtr != NULL; - tracePtr = nextTracePtr) { - nextTracePtr = tracePtr->nextPtr; - if (tracePtr->level == 0 || - iPtr->numLevels <= tracePtr->level) { - /* - * Traces will be called: get command string - */ - - bytes = GetSrcInfoForPc(pc, codePtr, &length); - break; - } - } - } else { - Command *cmdPtr; - cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, objv[0]); - if ((cmdPtr != NULL) && (cmdPtr->flags & CMD_HAS_EXEC_TRACES)) { - bytes = GetSrcInfoForPc(pc, codePtr, &length); - } - } - /* - * A reference to part of the stack vector itself - * escapes our control: increase its refCount - * to stop it from being deallocated by a recursive - * call to ourselves. The extra variable is needed - * because all others are liable to change due to the - * trace procedures. + * Reset the instructionCount variable, since we're about to check + * for async stuff anyway while processing TclEvalObjvInternal. */ - preservedStackRefCountPtr = (char **) (stackPtr-1); - ++*preservedStackRefCountPtr; + instructionCount = 1; /* * Finally, let TclEvalObjvInternal handle the command. * - * TIP #280 : Record the last piece of info needed by + * TIP #280: Record the last piece of info needed by * 'TclGetSrcInfoForPc', and push the frame. */ -#ifdef TCL_TIP280 - bcFrame.data.tebc.pc = (char*) pc; - iPtr->cmdFramePtr = &bcFrame; - TclArgumentBCEnter((Tcl_Interp*) iPtr, objv, objc, - codePtr, &bcFrame, - pc - codePtr->codeStart); -#endif + bcFramePtr->data.tebc.pc = (char *) pc; + iPtr->cmdFramePtr = bcFramePtr; + if (iPtr->flags & INTERP_DEBUG_FRAME) { + TclArgumentBCEnter((Tcl_Interp *) iPtr, objv, objc, + codePtr, bcFramePtr, pc - codePtr->codeStart); + } DECACHE_STACK_INFO(); - Tcl_ResetResult(interp); - result = TclEvalObjvInternal(interp, objc, objv, bytes, length, 0); + result = TclEvalObjvInternal(interp, objc, objv, + /* call from TEBC */(char *) -1, -1, 0); CACHE_STACK_INFO(); -#ifdef TCL_TIP280 - TclArgumentBCRelease((Tcl_Interp*) iPtr, objv, objc, - codePtr, - pc - codePtr->codeStart); + if (iPtr->flags & INTERP_DEBUG_FRAME) { + TclArgumentBCRelease((Tcl_Interp *) iPtr, objv, objc, + codePtr, pc - codePtr->codeStart); + } iPtr->cmdFramePtr = iPtr->cmdFramePtr->nextPtr; -#endif - - /* - * If the old stack is going to be released, it is - * safe to do so now, since no references to objv are - * going to be used from now on. - */ - - --*preservedStackRefCountPtr; - if (*preservedStackRefCountPtr == (char *) 0) { - ckfree((VOID *) preservedStackRefCountPtr); - } if (result == TCL_OK) { + Tcl_Obj *objPtr; + +#ifndef TCL_COMPILE_DEBUG + if (*(pc+pcAdjustment) == INST_POP) { + NEXT_INST_V((pcAdjustment+1), objc, 0); + } +#endif /* - * Push the call's object result and continue execution - * with the next instruction. + * Push the call's object result and continue execution with + * the next instruction. */ TRACE_WITH_OBJ(("%u => ... after \"%.20s\": TCL_OK, result=", - objc, cmdNameBuf), Tcl_GetObjResult(interp)); + objc, cmdNameBuf), Tcl_GetObjResult(interp)); objResultPtr = Tcl_GetObjResult(interp); /* - * Reset the interp's result to avoid possible duplications - * of large objects [Bug 781585]. We do not call - * Tcl_ResetResult() to avoid any side effects caused by - * the resetting of errorInfo and errorCode [Bug 804681], - * which are not needed here. We chose instead to manipulate - * the interp's object result directly. + * Reset the interp's result to avoid possible duplications of + * large objects [Bug 781585]. We do not call Tcl_ResetResult + * to avoid any side effects caused by the resetting of + * errorInfo and errorCode [Bug 804681], which are not needed + * here. We chose instead to manipulate the interp's object + * result directly. * * Note that the result object is now in objResultPtr, it - * keeps the refCount it had in its role of iPtr->objResultPtr. + * keeps the refCount it had in its role of + * iPtr->objResultPtr. */ - { - Tcl_Obj *newObjResultPtr; - TclNewObj(newObjResultPtr); - Tcl_IncrRefCount(newObjResultPtr); - iPtr->objResultPtr = newObjResultPtr; - } - NEXT_INST_V(pcAdjustment, opnd, -1); + TclNewObj(objPtr); + Tcl_IncrRefCount(objPtr); + iPtr->objResultPtr = objPtr; + NEXT_INST_V(pcAdjustment, objc, -1); } else { - cleanup = opnd; + cleanup = objc; goto processExceptionReturn; } } - case INST_EVAL_STK: +#if TCL_SUPPORT_84_BYTECODE + case INST_CALL_BUILTIN_FUNC1: { /* - * Note to maintainers: it is important that INST_EVAL_STK - * pop its argument from the stack before jumping to - * checkForCatch! DO NOT OPTIMISE! + * Call one of the built-in pre-8.5 Tcl math functions. This + * translates to INST_INVOKE_STK1 with the first argument of + * ::tcl::mathfunc::$objv[0]. We need to insert the named math + * function into the stack. */ - objPtr = stackPtr[stackTop]; - DECACHE_STACK_INFO(); -#ifndef TCL_TIP280 - result = TclCompEvalObj(interp, objPtr); + int opnd, numArgs; + Tcl_Obj *objPtr; + + opnd = TclGetUInt1AtPtr(pc+1); + if ((opnd < 0) || (opnd > LAST_BUILTIN_FUNC)) { + TRACE(("UNRECOGNIZED BUILTIN FUNC CODE %d\n", opnd)); + Tcl_Panic("TclExecuteByteCode: unrecognized builtin function code %d", opnd); + } + + objPtr = Tcl_NewStringObj("::tcl::mathfunc::", 17); + Tcl_AppendToObj(objPtr, tclBuiltinFuncTable[opnd].name, -1); + + /* + * Only 0, 1 or 2 args. + */ + + numArgs = tclBuiltinFuncTable[opnd].numArgs; + if (numArgs == 0) { + PUSH_OBJECT(objPtr); + } else if (numArgs == 1) { + Tcl_Obj *tmpPtr1 = POP_OBJECT(); + PUSH_OBJECT(objPtr); + PUSH_OBJECT(tmpPtr1); + Tcl_DecrRefCount(tmpPtr1); + } else { + Tcl_Obj *tmpPtr1, *tmpPtr2; + tmpPtr2 = POP_OBJECT(); + tmpPtr1 = POP_OBJECT(); + PUSH_OBJECT(objPtr); + PUSH_OBJECT(tmpPtr1); + PUSH_OBJECT(tmpPtr2); + Tcl_DecrRefCount(tmpPtr1); + Tcl_DecrRefCount(tmpPtr2); + } + + objc = numArgs + 1; + pcAdjustment = 2; + goto doInvocation; + } + + case INST_CALL_FUNC1: { + /* + * Call a non-builtin Tcl math function previously registered by a + * call to Tcl_CreateMathFunc pre-8.5. This is essentially + * INST_INVOKE_STK1 converting the first arg to + * ::tcl::mathfunc::$objv[0]. + */ + + Tcl_Obj *tmpPtr, *objPtr; + + /* + * Number of arguments. The function name is the 0-th argument. + */ + + objc = TclGetUInt1AtPtr(pc+1); + + objPtr = OBJ_AT_DEPTH(objc-1); + tmpPtr = Tcl_NewStringObj("::tcl::mathfunc::", 17); + Tcl_AppendObjToObj(tmpPtr, objPtr); + Tcl_DecrRefCount(objPtr); + + /* + * Variation of PUSH_OBJECT. + */ + + OBJ_AT_DEPTH(objc-1) = tmpPtr; + Tcl_IncrRefCount(tmpPtr); + + pcAdjustment = 2; + goto doInvocation; + } #else - /* TIP #280: The invoking context is left NULL for a dynamically + /* + * INST_CALL_BUILTIN_FUNC1 and INST_CALL_FUNC1 were made obsolete by the + * changes to add a ::tcl::mathfunc namespace in 8.5. Optional support + * remains for existing bytecode precompiled files. + */ + + case INST_CALL_BUILTIN_FUNC1: + Tcl_Panic("TclExecuteByteCode: obsolete INST_CALL_BUILTIN_FUNC1 found"); + case INST_CALL_FUNC1: + Tcl_Panic("TclExecuteByteCode: obsolete INST_CALL_FUNC1 found"); +#endif + } + + case INST_EVAL_STK: { + /* + * Note to maintainers: it is important that INST_EVAL_STK pop its + * argument from the stack before jumping to checkForCatch! DO NOT + * OPTIMISE! + */ + + Tcl_Obj *objPtr = OBJ_AT_TOS; + + DECACHE_STACK_INFO(); + + /* + * TIP #280: The invoking context is left NULL for a dynamically * constructed command. We cannot match its lines to the outer * context. */ - result = TclCompEvalObj(interp, objPtr, NULL,0); -#endif + result = TclCompEvalObj(interp, objPtr, NULL, 0); CACHE_STACK_INFO(); if (result == TCL_OK) { /* @@ -1652,69 +2582,75 @@ TclExecuteByteCode(interp, codePtr) objResultPtr = Tcl_GetObjResult(interp); TRACE_WITH_OBJ(("\"%.30s\" => ", O2S(objPtr)), - Tcl_GetObjResult(interp)); + Tcl_GetObjResult(interp)); /* - * Reset the interp's result to avoid possible duplications - * of large objects [Bug 781585]. We do not call - * Tcl_ResetResult() to avoid any side effects caused by - * the resetting of errorInfo and errorCode [Bug 804681], - * which are not needed here. We chose instead to manipulate - * the interp's object result directly. + * Reset the interp's result to avoid possible duplications of + * large objects [Bug 781585]. We do not call Tcl_ResetResult to + * avoid any side effects caused by the resetting of errorInfo and + * errorCode [Bug 804681], which are not needed here. We chose + * instead to manipulate the interp's object result directly. * - * Note that the result object is now in objResultPtr, it - * keeps the refCount it had in its role of iPtr->objResultPtr. + * Note that the result object is now in objResultPtr, it keeps + * the refCount it had in its role of iPtr->objResultPtr. */ - { - Tcl_Obj *newObjResultPtr; - TclNewObj(newObjResultPtr); - Tcl_IncrRefCount(newObjResultPtr); - iPtr->objResultPtr = newObjResultPtr; - } + TclNewObj(objPtr); + Tcl_IncrRefCount(objPtr); + iPtr->objResultPtr = objPtr; NEXT_INST_F(1, 1, -1); } else { cleanup = 1; goto processExceptionReturn; } + } - case INST_EXPR_STK: - objPtr = stackPtr[stackTop]; + case INST_EXPR_STK: { + Tcl_Obj *objPtr, *valuePtr; + + objPtr = OBJ_AT_TOS; DECACHE_STACK_INFO(); - Tcl_ResetResult(interp); + /*Tcl_ResetResult(interp);*/ result = Tcl_ExprObj(interp, objPtr, &valuePtr); CACHE_STACK_INFO(); - if (result != TCL_OK) { - TRACE_WITH_OBJ(("\"%.30s\" => ERROR: ", - O2S(objPtr)), Tcl_GetObjResult(interp)); + if (result == TCL_OK) { + objResultPtr = valuePtr; + TRACE_WITH_OBJ(("\"%.30s\" => ", O2S(objPtr)), valuePtr); + NEXT_INST_F(1, 1, -1); /* Already has right refct. */ + } else { + TRACE_WITH_OBJ(("\"%.30s\" => ERROR: ", O2S(objPtr)), + Tcl_GetObjResult(interp)); goto checkForCatch; } - objResultPtr = valuePtr; - TRACE_WITH_OBJ(("\"%.30s\" => ", O2S(objPtr)), valuePtr); - NEXT_INST_F(1, 1, -1); /* already has right refct */ + } /* * --------------------------------------------------------- - * Start of INST_LOAD instructions. + * Start of INST_LOAD instructions. * - * WARNING: more 'goto' here than your doctor recommended! - * The different instructions set the value of some variables - * and then jump to somme common execution code. + * WARNING: more 'goto' here than your doctor recommended! The different + * instructions set the value of some variables and then jump to some + * common execution code. */ + { + int opnd, pcAdjustment; + Tcl_Obj *part1Ptr, *part2Ptr; + Var *varPtr, *arrayPtr; + Tcl_Obj *objPtr; case INST_LOAD_SCALAR1: + instLoadScalar1: opnd = TclGetUInt1AtPtr(pc+1); - varPtr = &(varFramePtr->compiledLocals[opnd]); - part1 = varPtr->name; + varPtr = &(compiledLocals[opnd]); while (TclIsVarLink(varPtr)) { varPtr = varPtr->value.linkPtr; } TRACE(("%u => ", opnd)); - if (TclIsVarScalar(varPtr) && !TclIsVarUndefined(varPtr) - && (varPtr->tracePtr == NULL)) { + if (TclIsVarDirectReadable(varPtr)) { /* * No errors, no traces: just get the value. */ + objResultPtr = varPtr->value.objPtr; TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); NEXT_INST_F(2, 0, 1); @@ -1722,22 +2658,21 @@ TclExecuteByteCode(interp, codePtr) pcAdjustment = 2; cleanup = 0; arrayPtr = NULL; - part2 = NULL; + part1Ptr = part2Ptr = NULL; goto doCallPtrGetVar; case INST_LOAD_SCALAR4: opnd = TclGetUInt4AtPtr(pc+1); - varPtr = &(varFramePtr->compiledLocals[opnd]); - part1 = varPtr->name; + varPtr = &(compiledLocals[opnd]); while (TclIsVarLink(varPtr)) { varPtr = varPtr->value.linkPtr; } TRACE(("%u => ", opnd)); - if (TclIsVarScalar(varPtr) && !TclIsVarUndefined(varPtr) - && (varPtr->tracePtr == NULL)) { + if (TclIsVarDirectReadable(varPtr)) { /* * No errors, no traces: just get the value. */ + objResultPtr = varPtr->value.objPtr; TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); NEXT_INST_F(5, 0, 1); @@ -1745,46 +2680,7 @@ TclExecuteByteCode(interp, codePtr) pcAdjustment = 5; cleanup = 0; arrayPtr = NULL; - part2 = NULL; - goto doCallPtrGetVar; - - case INST_LOAD_ARRAY_STK: - cleanup = 2; - part2 = Tcl_GetString(stackPtr[stackTop]); /* element name */ - objPtr = stackPtr[stackTop-1]; /* array name */ - TRACE(("\"%.30s(%.30s)\" => ", O2S(objPtr), part2)); - goto doLoadStk; - - case INST_LOAD_STK: - case INST_LOAD_SCALAR_STK: - cleanup = 1; - part2 = NULL; - objPtr = stackPtr[stackTop]; /* variable name */ - TRACE(("\"%.30s\" => ", O2S(objPtr))); - - doLoadStk: - part1 = TclGetString(objPtr); - varPtr = TclObjLookupVar(interp, objPtr, part2, - TCL_LEAVE_ERR_MSG, "read", - /*createPart1*/ 0, - /*createPart2*/ 1, &arrayPtr); - if (varPtr == NULL) { - TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); - result = TCL_ERROR; - goto checkForCatch; - } - if (TclIsVarScalar(varPtr) && !TclIsVarUndefined(varPtr) - && (varPtr->tracePtr == NULL) - && ((arrayPtr == NULL) - || (arrayPtr->tracePtr == NULL))) { - /* - * No errors, no traces: just get the value. - */ - objResultPtr = varPtr->value.objPtr; - TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); - NEXT_INST_V(1, cleanup, 1); - } - pcAdjustment = 1; + part1Ptr = part2Ptr = NULL; goto doCallPtrGetVar; case INST_LOAD_ARRAY4: @@ -1795,143 +2691,267 @@ TclExecuteByteCode(interp, codePtr) case INST_LOAD_ARRAY1: opnd = TclGetUInt1AtPtr(pc+1); pcAdjustment = 2; - + doLoadArray: - part2 = TclGetString(stackPtr[stackTop]); - arrayPtr = &(varFramePtr->compiledLocals[opnd]); - part1 = arrayPtr->name; + part1Ptr = NULL; + part2Ptr = OBJ_AT_TOS; + arrayPtr = &(compiledLocals[opnd]); while (TclIsVarLink(arrayPtr)) { arrayPtr = arrayPtr->value.linkPtr; } - TRACE(("%u \"%.30s\" => ", opnd, part2)); - varPtr = TclLookupArrayElement(interp, part1, part2, - TCL_LEAVE_ERR_MSG, "read", 0, 1, arrayPtr); + TRACE(("%u \"%.30s\" => ", opnd, O2S(part2Ptr))); + if (TclIsVarArray(arrayPtr) && !ReadTraced(arrayPtr)) { + varPtr = VarHashFindVar(arrayPtr->value.tablePtr, part2Ptr); + if (varPtr && TclIsVarDirectReadable(varPtr)) { + /* + * No errors, no traces: just get the value. + */ + + objResultPtr = varPtr->value.objPtr; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(pcAdjustment, 1, 1); + } + } + varPtr = TclLookupArrayElement(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "read", 0, 1, arrayPtr, opnd); if (varPtr == NULL) { - TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); + TRACE_APPEND(("ERROR: %.30s\n", + O2S(Tcl_GetObjResult(interp)))); result = TCL_ERROR; goto checkForCatch; } - if (TclIsVarScalar(varPtr) && !TclIsVarUndefined(varPtr) - && (varPtr->tracePtr == NULL) - && ((arrayPtr == NULL) - || (arrayPtr->tracePtr == NULL))) { - /* - * No errors, no traces: just get the value. - */ - objResultPtr = varPtr->value.objPtr; - TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); - NEXT_INST_F(pcAdjustment, 1, 1); - } cleanup = 1; goto doCallPtrGetVar; + case INST_LOAD_ARRAY_STK: + cleanup = 2; + part2Ptr = OBJ_AT_TOS; /* element name */ + objPtr = OBJ_UNDER_TOS; /* array name */ + TRACE(("\"%.30s(%.30s)\" => ", O2S(objPtr), O2S(part2Ptr))); + goto doLoadStk; + + case INST_LOAD_STK: + case INST_LOAD_SCALAR_STK: + cleanup = 1; + part2Ptr = NULL; + objPtr = OBJ_AT_TOS; /* variable name */ + TRACE(("\"%.30s\" => ", O2S(objPtr))); + + doLoadStk: + part1Ptr = objPtr; + varPtr = TclObjLookupVarEx(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "read", /*createPart1*/0, /*createPart2*/1, + &arrayPtr); + if (varPtr) { + if (TclIsVarDirectReadable2(varPtr, arrayPtr)) { + /* + * No errors, no traces: just get the value. + */ + + objResultPtr = varPtr->value.objPtr; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(1, cleanup, 1); + } + pcAdjustment = 1; + opnd = -1; + goto doCallPtrGetVar; + } else { + TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); + result = TCL_ERROR; + goto checkForCatch; + } + doCallPtrGetVar: /* - * There are either errors or the variable is traced: - * call TclPtrGetVar to process fully. + * There are either errors or the variable is traced: call + * TclPtrGetVar to process fully. */ DECACHE_STACK_INFO(); - objResultPtr = TclPtrGetVar(interp, varPtr, arrayPtr, part1, - part2, TCL_LEAVE_ERR_MSG); + objResultPtr = TclPtrGetVar(interp, varPtr, arrayPtr, + part1Ptr, part2Ptr, TCL_LEAVE_ERR_MSG, opnd); CACHE_STACK_INFO(); - if (objResultPtr == NULL) { + if (objResultPtr) { + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(pcAdjustment, cleanup, 1); + } else { TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); result = TCL_ERROR; goto checkForCatch; } - TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); - NEXT_INST_V(pcAdjustment, cleanup, 1); + } /* - * End of INST_LOAD instructions. + * End of INST_LOAD instructions. * --------------------------------------------------------- */ /* * --------------------------------------------------------- - * Start of INST_STORE and related instructions. + * Start of INST_STORE and related instructions. * - * WARNING: more 'goto' here than your doctor recommended! - * The different instructions set the value of some variables - * and then jump to somme common execution code. + * WARNING: more 'goto' here than your doctor recommended! The different + * instructions set the value of some variables and then jump to somme + * common execution code. */ + { + int opnd, pcAdjustment, storeFlags; + Tcl_Obj *part1Ptr, *part2Ptr; + Var *varPtr, *arrayPtr; + Tcl_Obj *objPtr, *valuePtr; + + case INST_STORE_ARRAY4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + goto doStoreArrayDirect; + + case INST_STORE_ARRAY1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + + doStoreArrayDirect: + valuePtr = OBJ_AT_TOS; + part2Ptr = OBJ_UNDER_TOS; + arrayPtr = &(compiledLocals[opnd]); + TRACE(("%u \"%.30s\" <- \"%.30s\" => ", opnd, O2S(part2Ptr), + O2S(valuePtr))); + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + if (TclIsVarArray(arrayPtr) && !WriteTraced(arrayPtr)) { + varPtr = VarHashFindVar(arrayPtr->value.tablePtr, part2Ptr); + if (varPtr && TclIsVarDirectWritable(varPtr)) { + tosPtr--; + Tcl_DecrRefCount(OBJ_AT_TOS); + OBJ_AT_TOS = valuePtr; + goto doStoreVarDirect; + } + } + cleanup = 2; + storeFlags = TCL_LEAVE_ERR_MSG; + part1Ptr = NULL; + goto doStoreArrayDirectFailed; + + case INST_STORE_SCALAR4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + goto doStoreScalarDirect; + + case INST_STORE_SCALAR1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + + doStoreScalarDirect: + valuePtr = OBJ_AT_TOS; + varPtr = &(compiledLocals[opnd]); + TRACE(("%u <- \"%.30s\" => ", opnd, O2S(valuePtr))); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + if (TclIsVarDirectWritable(varPtr)) { + doStoreVarDirect: + /* + * No traces, no errors, plain 'set': we can safely inline. The + * value *will* be set to what's requested, so that the stack top + * remains pointing to the same Tcl_Obj. + */ + + valuePtr = varPtr->value.objPtr; + if (valuePtr != NULL) { + TclDecrRefCount(valuePtr); + } + objResultPtr = OBJ_AT_TOS; + varPtr->value.objPtr = objResultPtr; +#ifndef TCL_COMPILE_DEBUG + if (*(pc+pcAdjustment) == INST_POP) { + tosPtr--; + NEXT_INST_F((pcAdjustment+1), 0, 0); + } +#else + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); +#endif + Tcl_IncrRefCount(objResultPtr); + NEXT_INST_F(pcAdjustment, 0, 0); + } + storeFlags = TCL_LEAVE_ERR_MSG; + part1Ptr = NULL; + goto doStoreScalar; + case INST_LAPPEND_STK: - valuePtr = stackPtr[stackTop]; /* value to append */ - part2 = NULL; - storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE - | TCL_LIST_ELEMENT); + valuePtr = OBJ_AT_TOS; /* value to append */ + part2Ptr = NULL; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); goto doStoreStk; case INST_LAPPEND_ARRAY_STK: - valuePtr = stackPtr[stackTop]; /* value to append */ - part2 = TclGetString(stackPtr[stackTop - 1]); - storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE - | TCL_LIST_ELEMENT); + valuePtr = OBJ_AT_TOS; /* value to append */ + part2Ptr = OBJ_UNDER_TOS; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); goto doStoreStk; case INST_APPEND_STK: - valuePtr = stackPtr[stackTop]; /* value to append */ - part2 = NULL; + valuePtr = OBJ_AT_TOS; /* value to append */ + part2Ptr = NULL; storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); goto doStoreStk; case INST_APPEND_ARRAY_STK: - valuePtr = stackPtr[stackTop]; /* value to append */ - part2 = TclGetString(stackPtr[stackTop - 1]); + valuePtr = OBJ_AT_TOS; /* value to append */ + part2Ptr = OBJ_UNDER_TOS; storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); goto doStoreStk; case INST_STORE_ARRAY_STK: - valuePtr = stackPtr[stackTop]; - part2 = TclGetString(stackPtr[stackTop - 1]); + valuePtr = OBJ_AT_TOS; + part2Ptr = OBJ_UNDER_TOS; storeFlags = TCL_LEAVE_ERR_MSG; goto doStoreStk; case INST_STORE_STK: case INST_STORE_SCALAR_STK: - valuePtr = stackPtr[stackTop]; - part2 = NULL; + valuePtr = OBJ_AT_TOS; + part2Ptr = NULL; storeFlags = TCL_LEAVE_ERR_MSG; doStoreStk: - objPtr = stackPtr[stackTop - 1 - (part2 != NULL)]; /* variable name */ - part1 = TclGetString(objPtr); + objPtr = OBJ_AT_DEPTH(1 + (part2Ptr != NULL)); /* variable name */ + part1Ptr = objPtr; #ifdef TCL_COMPILE_DEBUG - if (part2 == NULL) { - TRACE(("\"%.30s\" <- \"%.30s\" =>", - part1, O2S(valuePtr))); + if (part2Ptr == NULL) { + TRACE(("\"%.30s\" <- \"%.30s\" =>", O2S(part1Ptr),O2S(valuePtr))); } else { TRACE(("\"%.30s(%.30s)\" <- \"%.30s\" => ", - part1, part2, O2S(valuePtr))); + O2S(part1Ptr), O2S(part2Ptr), O2S(valuePtr))); } #endif - varPtr = TclObjLookupVar(interp, objPtr, part2, - TCL_LEAVE_ERR_MSG, "set", - /*createPart1*/ 1, - /*createPart2*/ 1, &arrayPtr); - if (varPtr == NULL) { + varPtr = TclObjLookupVarEx(interp, objPtr,part2Ptr, TCL_LEAVE_ERR_MSG, + "set", /*createPart1*/ 1, /*createPart2*/ 1, &arrayPtr); + if (varPtr) { + cleanup = ((part2Ptr == NULL)? 2 : 3); + pcAdjustment = 1; + opnd = -1; + goto doCallPtrSetVar; + } else { TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); result = TCL_ERROR; goto checkForCatch; } - cleanup = ((part2 == NULL)? 2 : 3); - pcAdjustment = 1; - goto doCallPtrSetVar; case INST_LAPPEND_ARRAY4: opnd = TclGetUInt4AtPtr(pc+1); pcAdjustment = 5; - storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE - | TCL_LIST_ELEMENT); + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); goto doStoreArray; case INST_LAPPEND_ARRAY1: opnd = TclGetUInt1AtPtr(pc+1); pcAdjustment = 2; - storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE - | TCL_LIST_ELEMENT); + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); goto doStoreArray; case INST_APPEND_ARRAY4: @@ -1946,49 +2966,41 @@ TclExecuteByteCode(interp, codePtr) storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); goto doStoreArray; - case INST_STORE_ARRAY4: - opnd = TclGetUInt4AtPtr(pc+1); - pcAdjustment = 5; - storeFlags = TCL_LEAVE_ERR_MSG; - goto doStoreArray; - - case INST_STORE_ARRAY1: - opnd = TclGetUInt1AtPtr(pc+1); - pcAdjustment = 2; - storeFlags = TCL_LEAVE_ERR_MSG; - doStoreArray: - valuePtr = stackPtr[stackTop]; - part2 = TclGetString(stackPtr[stackTop - 1]); - arrayPtr = &(varFramePtr->compiledLocals[opnd]); - part1 = arrayPtr->name; - TRACE(("%u \"%.30s\" <- \"%.30s\" => ", - opnd, part2, O2S(valuePtr))); + valuePtr = OBJ_AT_TOS; + part2Ptr = OBJ_UNDER_TOS; + arrayPtr = &(compiledLocals[opnd]); + TRACE(("%u \"%.30s\" <- \"%.30s\" => ", opnd, O2S(part2Ptr), + O2S(valuePtr))); while (TclIsVarLink(arrayPtr)) { arrayPtr = arrayPtr->value.linkPtr; } - varPtr = TclLookupArrayElement(interp, part1, part2, - TCL_LEAVE_ERR_MSG, "set", 1, 1, arrayPtr); - if (varPtr == NULL) { + cleanup = 2; + part1Ptr = NULL; + + doStoreArrayDirectFailed: + varPtr = TclLookupArrayElement(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "set", 1, 1, arrayPtr, opnd); + if (varPtr) { + goto doCallPtrSetVar; + } else { TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); result = TCL_ERROR; goto checkForCatch; } - cleanup = 2; - goto doCallPtrSetVar; case INST_LAPPEND_SCALAR4: opnd = TclGetUInt4AtPtr(pc+1); pcAdjustment = 5; - storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE - | TCL_LIST_ELEMENT); + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); goto doStoreScalar; case INST_LAPPEND_SCALAR1: opnd = TclGetUInt1AtPtr(pc+1); - pcAdjustment = 2; - storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE - | TCL_LIST_ELEMENT); + pcAdjustment = 2; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); goto doStoreScalar; case INST_APPEND_SCALAR4: @@ -1999,248 +3011,317 @@ TclExecuteByteCode(interp, codePtr) case INST_APPEND_SCALAR1: opnd = TclGetUInt1AtPtr(pc+1); - pcAdjustment = 2; + pcAdjustment = 2; storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); goto doStoreScalar; - case INST_STORE_SCALAR4: - opnd = TclGetUInt4AtPtr(pc+1); - pcAdjustment = 5; - storeFlags = TCL_LEAVE_ERR_MSG; - goto doStoreScalar; - - case INST_STORE_SCALAR1: - opnd = TclGetUInt1AtPtr(pc+1); - pcAdjustment = 2; - storeFlags = TCL_LEAVE_ERR_MSG; - doStoreScalar: - valuePtr = stackPtr[stackTop]; - varPtr = &(varFramePtr->compiledLocals[opnd]); - part1 = varPtr->name; + valuePtr = OBJ_AT_TOS; + varPtr = &(compiledLocals[opnd]); TRACE(("%u <- \"%.30s\" => ", opnd, O2S(valuePtr))); while (TclIsVarLink(varPtr)) { varPtr = varPtr->value.linkPtr; } cleanup = 1; arrayPtr = NULL; - part2 = NULL; + part1Ptr = part2Ptr = NULL; doCallPtrSetVar: - if ((storeFlags == TCL_LEAVE_ERR_MSG) - && !((varPtr->flags & VAR_IN_HASHTABLE) - && (varPtr->hPtr == NULL)) - && (varPtr->tracePtr == NULL) - && (TclIsVarScalar(varPtr) - || TclIsVarUndefined(varPtr)) - && ((arrayPtr == NULL) - || (arrayPtr->tracePtr == NULL))) { - /* - * No traces, no errors, plain 'set': we can safely inline. - * The value *will* be set to what's requested, so that - * the stack top remains pointing to the same Tcl_Obj. - */ - valuePtr = varPtr->value.objPtr; - objResultPtr = stackPtr[stackTop]; - if (valuePtr != objResultPtr) { - if (valuePtr != NULL) { - TclDecrRefCount(valuePtr); - } else { - TclSetVarScalar(varPtr); - TclClearVarUndefined(varPtr); - } - varPtr->value.objPtr = objResultPtr; - Tcl_IncrRefCount(objResultPtr); - } + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, arrayPtr, + part1Ptr, part2Ptr, valuePtr, storeFlags, opnd); + CACHE_STACK_INFO(); + if (objResultPtr) { #ifndef TCL_COMPILE_DEBUG if (*(pc+pcAdjustment) == INST_POP) { NEXT_INST_V((pcAdjustment+1), cleanup, 0); } -#else - TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); #endif + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); NEXT_INST_V(pcAdjustment, cleanup, 1); } else { - DECACHE_STACK_INFO(); - objResultPtr = TclPtrSetVar(interp, varPtr, arrayPtr, - part1, part2, valuePtr, storeFlags); - CACHE_STACK_INFO(); - if (objResultPtr == NULL) { - TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); - result = TCL_ERROR; - goto checkForCatch; - } - } -#ifndef TCL_COMPILE_DEBUG - if (*(pc+pcAdjustment) == INST_POP) { - NEXT_INST_V((pcAdjustment+1), cleanup, 0); + TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); + result = TCL_ERROR; + goto checkForCatch; } -#endif - TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); - NEXT_INST_V(pcAdjustment, cleanup, 1); - + } /* - * End of INST_STORE and related instructions. + * End of INST_STORE and related instructions. * --------------------------------------------------------- */ /* * --------------------------------------------------------- - * Start of INST_INCR instructions. + * Start of INST_INCR instructions. * - * WARNING: more 'goto' here than your doctor recommended! - * The different instructions set the value of some variables - * and then jump to somme common execution code. + * WARNING: more 'goto' here than your doctor recommended! The different + * instructions set the value of some variables and then jump to somme + * common execution code. */ +/*TODO: Consider more untangling here; merge with LOAD and STORE ? */ + + { + Tcl_Obj *objPtr, *incrPtr; + int opnd, pcAdjustment; +#ifndef NO_WIDE_TYPE + Tcl_WideInt w; +#endif + long i; + Tcl_Obj *part1Ptr, *part2Ptr; + Var *varPtr, *arrayPtr; + case INST_INCR_SCALAR1: case INST_INCR_ARRAY1: case INST_INCR_ARRAY_STK: case INST_INCR_SCALAR_STK: case INST_INCR_STK: opnd = TclGetUInt1AtPtr(pc+1); - valuePtr = stackPtr[stackTop]; - if (valuePtr->typePtr == &tclIntType) { - i = valuePtr->internalRep.longValue; - } else if (valuePtr->typePtr == &tclWideIntType) { - TclGetLongFromWide(i,valuePtr); - } else { - REQUIRE_WIDE_OR_INT(result, valuePtr, i, w); - if (result != TCL_OK) { - TRACE_WITH_OBJ(("%u (by %s) => ERROR converting increment amount to int: ", - opnd, O2S(valuePtr)), Tcl_GetObjResult(interp)); - DECACHE_STACK_INFO(); - Tcl_AddErrorInfo(interp, "\n (reading increment)"); - CACHE_STACK_INFO(); - goto checkForCatch; - } - FORCE_LONG(valuePtr, i, w); - } - stackTop--; - TclDecrRefCount(valuePtr); + incrPtr = POP_OBJECT(); switch (*pc) { - case INST_INCR_SCALAR1: - pcAdjustment = 2; - goto doIncrScalar; - case INST_INCR_ARRAY1: - pcAdjustment = 2; - goto doIncrArray; - default: - pcAdjustment = 1; - goto doIncrStk; + case INST_INCR_SCALAR1: + pcAdjustment = 2; + goto doIncrScalar; + case INST_INCR_ARRAY1: + pcAdjustment = 2; + goto doIncrArray; + default: + pcAdjustment = 1; + goto doIncrStk; } case INST_INCR_ARRAY_STK_IMM: case INST_INCR_SCALAR_STK_IMM: case INST_INCR_STK_IMM: i = TclGetInt1AtPtr(pc+1); + incrPtr = Tcl_NewIntObj(i); + Tcl_IncrRefCount(incrPtr); pcAdjustment = 2; - + doIncrStk: - if ((*pc == INST_INCR_ARRAY_STK_IMM) - || (*pc == INST_INCR_ARRAY_STK)) { - part2 = TclGetString(stackPtr[stackTop]); - objPtr = stackPtr[stackTop - 1]; + if ((*pc == INST_INCR_ARRAY_STK_IMM) + || (*pc == INST_INCR_ARRAY_STK)) { + part2Ptr = OBJ_AT_TOS; + objPtr = OBJ_UNDER_TOS; TRACE(("\"%.30s(%.30s)\" (by %ld) => ", - O2S(objPtr), part2, i)); + O2S(objPtr), O2S(part2Ptr), i)); } else { - part2 = NULL; - objPtr = stackPtr[stackTop]; + part2Ptr = NULL; + objPtr = OBJ_AT_TOS; TRACE(("\"%.30s\" (by %ld) => ", O2S(objPtr), i)); } - part1 = TclGetString(objPtr); - - varPtr = TclObjLookupVar(interp, objPtr, part2, - TCL_LEAVE_ERR_MSG, "read", 0, 1, &arrayPtr); - if (varPtr == NULL) { - DECACHE_STACK_INFO(); + part1Ptr = objPtr; + opnd = -1; + varPtr = TclObjLookupVarEx(interp, objPtr, part2Ptr, + TCL_LEAVE_ERR_MSG, "read", 1, 1, &arrayPtr); + if (varPtr) { + cleanup = ((part2Ptr == NULL)? 1 : 2); + goto doIncrVar; + } else { Tcl_AddObjErrorInfo(interp, - "\n (reading value of variable to increment)", -1); - CACHE_STACK_INFO(); + "\n (reading value of variable to increment)", -1); TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); result = TCL_ERROR; + Tcl_DecrRefCount(incrPtr); goto checkForCatch; } - cleanup = ((part2 == NULL)? 1 : 2); - goto doIncrVar; case INST_INCR_ARRAY1_IMM: opnd = TclGetUInt1AtPtr(pc+1); i = TclGetInt1AtPtr(pc+2); + incrPtr = Tcl_NewIntObj(i); + Tcl_IncrRefCount(incrPtr); pcAdjustment = 3; doIncrArray: - part2 = TclGetString(stackPtr[stackTop]); - arrayPtr = &(varFramePtr->compiledLocals[opnd]); - part1 = arrayPtr->name; + part1Ptr = NULL; + part2Ptr = OBJ_AT_TOS; + arrayPtr = &(compiledLocals[opnd]); + cleanup = 1; while (TclIsVarLink(arrayPtr)) { arrayPtr = arrayPtr->value.linkPtr; } - TRACE(("%u \"%.30s\" (by %ld) => ", - opnd, part2, i)); - varPtr = TclLookupArrayElement(interp, part1, part2, - TCL_LEAVE_ERR_MSG, "read", 0, 1, arrayPtr); - if (varPtr == NULL) { + TRACE(("%u \"%.30s\" (by %ld) => ", opnd, O2S(part2Ptr), i)); + varPtr = TclLookupArrayElement(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "read", 1, 1, arrayPtr, opnd); + if (varPtr) { + goto doIncrVar; + } else { TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); result = TCL_ERROR; + Tcl_DecrRefCount(incrPtr); goto checkForCatch; } - cleanup = 1; - goto doIncrVar; case INST_INCR_SCALAR1_IMM: opnd = TclGetUInt1AtPtr(pc+1); i = TclGetInt1AtPtr(pc+2); pcAdjustment = 3; + cleanup = 0; + varPtr = &(compiledLocals[opnd]); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + + if (TclIsVarDirectModifyable(varPtr)) { + ClientData ptr; + int type; + + objPtr = varPtr->value.objPtr; + if (GetNumberFromObj(NULL, objPtr, &ptr, &type) == TCL_OK) { + if (type == TCL_NUMBER_LONG) { + long augend = *((const long *)ptr); + long sum = augend + i; + + /* + * Overflow when (augend and sum have different sign) and + * (augend and i have the same sign). This is encapsulated + * in the Overflowing macro. + */ + + if (!Overflowing(augend, i, sum)) { + TRACE(("%u %ld => ", opnd, i)); + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared. */ + TclNewLongObj(objResultPtr, sum); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + TclSetLongObj(objPtr, sum); + } + goto doneIncr; + } +#ifndef NO_WIDE_TYPE + { + w = (Tcl_WideInt)augend; + + TRACE(("%u %ld => ", opnd, i)); + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared. */ + objResultPtr = Tcl_NewWideIntObj(w+i); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + + /* + * We know the sum value is outside the long + * range; use macro form that doesn't range test + * again. + */ + + TclSetWideIntObj(objPtr, w+i); + } + goto doneIncr; + } +#endif + } /* end if (type == TCL_NUMBER_LONG) */ +#ifndef NO_WIDE_TYPE + if (type == TCL_NUMBER_WIDE) { + Tcl_WideInt sum; + w = *((const Tcl_WideInt *)ptr); + sum = w + i; + + /* + * Check for overflow. + */ + + if (!Overflowing(w, i, sum)) { + TRACE(("%u %ld => ", opnd, i)); + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared. */ + objResultPtr = Tcl_NewWideIntObj(sum); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + + /* + * We *do not* know the sum value is outside the + * long range (wide + long can yield long); use + * the function call that checks range. + */ + + Tcl_SetWideIntObj(objPtr, sum); + } + goto doneIncr; + } + } +#endif + } + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared */ + objResultPtr = Tcl_DuplicateObj(objPtr); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + } + TclNewLongObj(incrPtr, i); + result = TclIncrObj(interp, objResultPtr, incrPtr); + Tcl_DecrRefCount(incrPtr); + if (result == TCL_OK) { + goto doneIncr; + } else { + TRACE_APPEND(("ERROR: %.30s\n", + O2S(Tcl_GetObjResult(interp)))); + goto checkForCatch; + } + } + + /* + * All other cases, flow through to generic handling. + */ + + TclNewLongObj(incrPtr, i); + Tcl_IncrRefCount(incrPtr); doIncrScalar: - varPtr = &(varFramePtr->compiledLocals[opnd]); - part1 = varPtr->name; + varPtr = &(compiledLocals[opnd]); while (TclIsVarLink(varPtr)) { varPtr = varPtr->value.linkPtr; } arrayPtr = NULL; - part2 = NULL; + part1Ptr = part2Ptr = NULL; cleanup = 0; TRACE(("%u %ld => ", opnd, i)); - doIncrVar: - objPtr = varPtr->value.objPtr; - if (TclIsVarScalar(varPtr) - && !TclIsVarUndefined(varPtr) - && (varPtr->tracePtr == NULL) - && ((arrayPtr == NULL) - || (arrayPtr->tracePtr == NULL)) - && (objPtr->typePtr == &tclIntType)) { - /* - * No errors, no traces, the variable already has an - * integer value: inline processing. - */ - - i += objPtr->internalRep.longValue; + if (TclIsVarDirectModifyable2(varPtr, arrayPtr)) { + objPtr = varPtr->value.objPtr; if (Tcl_IsShared(objPtr)) { - objResultPtr = Tcl_NewLongObj(i); - TclDecrRefCount(objPtr); + objPtr->refCount--; /* We know it's shared */ + objResultPtr = Tcl_DuplicateObj(objPtr); Tcl_IncrRefCount(objResultPtr); varPtr->value.objPtr = objResultPtr; } else { - Tcl_SetLongObj(objPtr, i); objResultPtr = objPtr; } - TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + result = TclIncrObj(interp, objResultPtr, incrPtr); + Tcl_DecrRefCount(incrPtr); + if (result == TCL_OK) { + goto doneIncr; + } else { + TRACE_APPEND(("ERROR: %.30s\n", + O2S(Tcl_GetObjResult(interp)))); + goto checkForCatch; + } } else { DECACHE_STACK_INFO(); - objResultPtr = TclPtrIncrVar(interp, varPtr, arrayPtr, part1, - part2, i, TCL_LEAVE_ERR_MSG); + objResultPtr = TclPtrIncrObjVar(interp, varPtr, arrayPtr, + part1Ptr, part2Ptr, incrPtr, TCL_LEAVE_ERR_MSG, opnd); CACHE_STACK_INFO(); + Tcl_DecrRefCount(incrPtr); if (objResultPtr == NULL) { - TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); + TRACE_APPEND(("ERROR: %.30s\n", + O2S(Tcl_GetObjResult(interp)))); result = TCL_ERROR; goto checkForCatch; } } + doneIncr: TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); #ifndef TCL_COMPILE_DEBUG if (*(pc+pcAdjustment) == INST_POP) { @@ -2248,250 +3329,532 @@ TclExecuteByteCode(interp, codePtr) } #endif NEXT_INST_V(pcAdjustment, cleanup, 1); - + } + /* - * End of INST_INCR instructions. + * End of INST_INCR instructions. * --------------------------------------------------------- */ + /* + * --------------------------------------------------------- + * Start of INST_EXIST instructions. + */ + { + Tcl_Obj *part1Ptr, *part2Ptr; + Var *varPtr, *arrayPtr; - case INST_JUMP1: - opnd = TclGetInt1AtPtr(pc+1); - TRACE(("%d => new pc %u\n", opnd, - (unsigned int)(pc + opnd - codePtr->codeStart))); - NEXT_INST_F(opnd, 0, 0); + case INST_EXIST_SCALAR: { + int opnd = TclGetUInt4AtPtr(pc+1); - case INST_JUMP4: - opnd = TclGetInt4AtPtr(pc+1); - TRACE(("%d => new pc %u\n", opnd, - (unsigned int)(pc + opnd - codePtr->codeStart))); - NEXT_INST_F(opnd, 0, 0); + varPtr = &(compiledLocals[opnd]); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u => ", opnd)); + if (ReadTraced(varPtr)) { + DECACHE_STACK_INFO(); + TclObjCallVarTraces(iPtr, NULL, varPtr, NULL, NULL, + TCL_TRACE_READS, 0, opnd); + CACHE_STACK_INFO(); + if (TclIsVarUndefined(varPtr)) { + TclCleanupVar(varPtr, NULL); + varPtr = NULL; + } + } - case INST_JUMP_FALSE4: - opnd = 5; /* TRUE */ - pcAdjustment = TclGetInt4AtPtr(pc+1); /* FALSE */ - goto doJumpTrue; + /* + * Tricky! Arrays always exist. + */ - case INST_JUMP_TRUE4: - opnd = TclGetInt4AtPtr(pc+1); /* TRUE */ - pcAdjustment = 5; /* FALSE */ - goto doJumpTrue; + objResultPtr = constants[!varPtr || TclIsVarUndefined(varPtr) ? 0 : 1]; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(5, 0, 1); + } - case INST_JUMP_FALSE1: - opnd = 2; /* TRUE */ - pcAdjustment = TclGetInt1AtPtr(pc+1); /* FALSE */ - goto doJumpTrue; + case INST_EXIST_ARRAY: { + int opnd = TclGetUInt4AtPtr(pc+1); + + part2Ptr = OBJ_AT_TOS; + arrayPtr = &(compiledLocals[opnd]); + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + TRACE(("%u \"%.30s\" => ", opnd, O2S(part2Ptr))); + if (TclIsVarArray(arrayPtr) && !ReadTraced(arrayPtr)) { + varPtr = VarHashFindVar(arrayPtr->value.tablePtr, part2Ptr); + if (!varPtr || !ReadTraced(varPtr)) { + goto doneExistArray; + } + } + varPtr = TclLookupArrayElement(interp, NULL, part2Ptr, 0, "access", + 0, 1, arrayPtr, opnd); + if (varPtr) { + if (ReadTraced(varPtr) || (arrayPtr && ReadTraced(arrayPtr))) { + DECACHE_STACK_INFO(); + TclObjCallVarTraces(iPtr, arrayPtr, varPtr, NULL, part2Ptr, + TCL_TRACE_READS, 0, opnd); + CACHE_STACK_INFO(); + } + if (TclIsVarUndefined(varPtr)) { + TclCleanupVar(varPtr, arrayPtr); + varPtr = NULL; + } + } + doneExistArray: + objResultPtr = constants[!varPtr || TclIsVarUndefined(varPtr) ? 0 : 1]; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(5, 1, 1); + } + + case INST_EXIST_ARRAY_STK: + cleanup = 2; + part2Ptr = OBJ_AT_TOS; /* element name */ + part1Ptr = OBJ_UNDER_TOS; /* array name */ + TRACE(("\"%.30s(%.30s)\" => ", O2S(part1Ptr), O2S(part2Ptr))); + goto doExistStk; + + case INST_EXIST_STK: + cleanup = 1; + part2Ptr = NULL; + part1Ptr = OBJ_AT_TOS; /* variable name */ + TRACE(("\"%.30s\" => ", O2S(part1Ptr))); + + doExistStk: + varPtr = TclObjLookupVarEx(interp, part1Ptr, part2Ptr, 0, "access", + /*createPart1*/0, /*createPart2*/1, &arrayPtr); + if (varPtr) { + if (ReadTraced(varPtr) || (arrayPtr && ReadTraced(arrayPtr))) { + DECACHE_STACK_INFO(); + TclObjCallVarTraces(iPtr, arrayPtr, varPtr, part1Ptr,part2Ptr, + TCL_TRACE_READS, 0, -1); + CACHE_STACK_INFO(); + } + if (TclIsVarUndefined(varPtr)) { + TclCleanupVar(varPtr, arrayPtr); + varPtr = NULL; + } + } + objResultPtr = constants[!varPtr || TclIsVarUndefined(varPtr) ? 0 : 1]; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(1, cleanup, 1); + } + + /* + * End of INST_EXIST instructions. + * --------------------------------------------------------- + */ + + case INST_UPVAR: { + int opnd; + Var *varPtr, *otherPtr; + + TRACE_WITH_OBJ(("upvar "), OBJ_UNDER_TOS); - case INST_JUMP_TRUE1: - opnd = TclGetInt1AtPtr(pc+1); /* TRUE */ - pcAdjustment = 2; /* FALSE */ - - doJumpTrue: { - int b; - - valuePtr = stackPtr[stackTop]; - if (valuePtr->typePtr == &tclIntType) { - b = (valuePtr->internalRep.longValue != 0); - } else if (valuePtr->typePtr == &tclDoubleType) { - b = (valuePtr->internalRep.doubleValue != 0.0); - } else if (valuePtr->typePtr == &tclWideIntType) { - TclGetWide(w,valuePtr); - b = (w != W0); - } else { - result = Tcl_GetBooleanFromObj(interp, valuePtr, &b); - if (result != TCL_OK) { - TRACE_WITH_OBJ(("%d => ERROR: ", opnd), Tcl_GetObjResult(interp)); - goto checkForCatch; + CallFrame *framePtr, *savedFramePtr; + + result = TclObjGetFrame(interp, OBJ_UNDER_TOS, &framePtr); + if (result != -1) { + /* + * Locate the other variable. + */ + + savedFramePtr = iPtr->varFramePtr; + iPtr->varFramePtr = framePtr; + otherPtr = TclObjLookupVarEx(interp, OBJ_AT_TOS, NULL, + (TCL_LEAVE_ERR_MSG), "access", + /*createPart1*/ 1, /*createPart2*/ 1, &varPtr); + iPtr->varFramePtr = savedFramePtr; + if (otherPtr) { + result = TCL_OK; + goto doLinkVars; } } -#ifndef TCL_COMPILE_DEBUG - NEXT_INST_F((b? opnd : pcAdjustment), 1, 0); -#else - if (b) { - if ((*pc == INST_JUMP_TRUE1) || (*pc == INST_JUMP_TRUE1)) { - TRACE(("%d => %.20s true, new pc %u\n", opnd, O2S(valuePtr), - (unsigned int)(pc+opnd - codePtr->codeStart))); - } else { - TRACE(("%d => %.20s true\n", pcAdjustment, O2S(valuePtr))); - } - NEXT_INST_F(opnd, 1, 0); - } else { - if ((*pc == INST_JUMP_TRUE1) || (*pc == INST_JUMP_TRUE1)) { - TRACE(("%d => %.20s false\n", opnd, O2S(valuePtr))); - } else { - opnd = pcAdjustment; - TRACE(("%d => %.20s false, new pc %u\n", opnd, O2S(valuePtr), - (unsigned int)(pc + opnd - codePtr->codeStart))); + result = TCL_ERROR; + goto checkForCatch; + } + + case INST_VARIABLE: + TRACE(("variable ")); + otherPtr = TclObjLookupVarEx(interp, OBJ_AT_TOS, NULL, + (TCL_NAMESPACE_ONLY | TCL_LEAVE_ERR_MSG), "access", + /*createPart1*/ 1, /*createPart2*/ 1, &varPtr); + if (otherPtr) { + /* + * Do the [variable] magic. + */ + + TclSetVarNamespaceVar(otherPtr); + result = TCL_OK; + goto doLinkVars; + } + result = TCL_ERROR; + goto checkForCatch; + + case INST_NSUPVAR: + TRACE_WITH_OBJ(("nsupvar "), OBJ_UNDER_TOS); + + { + Tcl_Namespace *nsPtr, *savedNsPtr; + + result = TclGetNamespaceFromObj(interp, OBJ_UNDER_TOS, &nsPtr); + if (result == TCL_OK) { + /* + * Locate the other variable. + */ + + savedNsPtr = (Tcl_Namespace *) iPtr->varFramePtr->nsPtr; + iPtr->varFramePtr->nsPtr = (Namespace *) nsPtr; + otherPtr = TclObjLookupVarEx(interp, OBJ_AT_TOS, NULL, + (TCL_NAMESPACE_ONLY | TCL_LEAVE_ERR_MSG), "access", + /*createPart1*/ 1, /*createPart2*/ 1, &varPtr); + iPtr->varFramePtr->nsPtr = (Namespace *) savedNsPtr; + if (otherPtr) { + goto doLinkVars; } - NEXT_INST_F(pcAdjustment, 1, 0); } -#endif + result = TCL_ERROR; + goto checkForCatch; } - - case INST_LOR: - case INST_LAND: - { + + doLinkVars: + /* - * Operands must be boolean or numeric. No int->double - * conversions are performed. + * If we are here, the local variable has already been created: do the + * little work of TclPtrMakeUpvar that remains to be done right here + * if there are no errors; otherwise, let it handle the case. */ - - int i1, i2; - int iResult; - char *s; - Tcl_ObjType *t1Ptr, *t2Ptr; - - value2Ptr = stackPtr[stackTop]; - valuePtr = stackPtr[stackTop - 1];; - t1Ptr = valuePtr->typePtr; - t2Ptr = value2Ptr->typePtr; - - if ((t1Ptr == &tclIntType) || (t1Ptr == &tclBooleanType)) { - i1 = (valuePtr->internalRep.longValue != 0); - } else if (t1Ptr == &tclWideIntType) { - TclGetWide(w,valuePtr); - i1 = (w != W0); - } else if (t1Ptr == &tclDoubleType) { - i1 = (valuePtr->internalRep.doubleValue != 0.0); - } else { - s = Tcl_GetStringFromObj(valuePtr, &length); - if (TclLooksLikeInt(s, length)) { - GET_WIDE_OR_INT(result, valuePtr, i, w); - if (valuePtr->typePtr == &tclIntType) { - i1 = (i != 0); - } else { - i1 = (w != W0); + + opnd = TclGetInt4AtPtr(pc+1);; + varPtr = &(compiledLocals[opnd]); + if ((varPtr != otherPtr) && !TclIsVarTraced(varPtr) + && (TclIsVarUndefined(varPtr) || TclIsVarLink(varPtr))) { + if (!TclIsVarUndefined(varPtr)) { + /* + * Then it is a defined link. + */ + + Var *linkPtr = varPtr->value.linkPtr; + + if (linkPtr == otherPtr) { + goto doLinkVarsDone; + } + if (TclIsVarInHash(linkPtr)) { + VarHashRefCount(linkPtr)--; + if (TclIsVarUndefined(linkPtr)) { + TclCleanupVar(linkPtr, NULL); + } } - } else { - result = Tcl_GetBooleanFromObj((Tcl_Interp *) NULL, - valuePtr, &i1); - i1 = (i1 != 0); } + TclSetVarLink(varPtr); + varPtr->value.linkPtr = otherPtr; + if (TclIsVarInHash(otherPtr)) { + VarHashRefCount(otherPtr)++; + } + } else { + result = TclPtrObjMakeUpvar(interp, otherPtr, NULL, 0, opnd); if (result != TCL_OK) { - TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(valuePtr), - (t1Ptr? t1Ptr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, valuePtr); - CACHE_STACK_INFO(); goto checkForCatch; } } - - if ((t2Ptr == &tclIntType) || (t2Ptr == &tclBooleanType)) { - i2 = (value2Ptr->internalRep.longValue != 0); - } else if (t2Ptr == &tclWideIntType) { - TclGetWide(w,value2Ptr); - i2 = (w != W0); - } else if (t2Ptr == &tclDoubleType) { - i2 = (value2Ptr->internalRep.doubleValue != 0.0); - } else { - s = Tcl_GetStringFromObj(value2Ptr, &length); - if (TclLooksLikeInt(s, length)) { - GET_WIDE_OR_INT(result, value2Ptr, i, w); - if (value2Ptr->typePtr == &tclIntType) { - i2 = (i != 0); - } else { - i2 = (w != W0); - } + + /* + * Do not pop the namespace or frame index, it may be needed for other + * variables - and [variable] did not push it at all. + */ + + doLinkVarsDone: + NEXT_INST_F(5, 1, 0); + } + + case INST_JUMP1: { + int opnd = TclGetInt1AtPtr(pc+1); + + TRACE(("%d => new pc %u\n", opnd, + (unsigned)(pc + opnd - codePtr->codeStart))); + NEXT_INST_F(opnd, 0, 0); + } + + case INST_JUMP4: { + int opnd = TclGetInt4AtPtr(pc+1); + + TRACE(("%d => new pc %u\n", opnd, + (unsigned)(pc + opnd - codePtr->codeStart))); + NEXT_INST_F(opnd, 0, 0); + } + + { + int jmpOffset[2], b; + Tcl_Obj *valuePtr; + + /* TODO: consider rewrite so we don't compute the offset we're not + * going to take. */ + case INST_JUMP_FALSE4: + jmpOffset[0] = TclGetInt4AtPtr(pc+1); /* FALSE offset */ + jmpOffset[1] = 5; /* TRUE offset*/ + goto doCondJump; + + case INST_JUMP_TRUE4: + jmpOffset[0] = 5; + jmpOffset[1] = TclGetInt4AtPtr(pc+1); + goto doCondJump; + + case INST_JUMP_FALSE1: + jmpOffset[0] = TclGetInt1AtPtr(pc+1); + jmpOffset[1] = 2; + goto doCondJump; + + case INST_JUMP_TRUE1: + jmpOffset[0] = 2; + jmpOffset[1] = TclGetInt1AtPtr(pc+1); + + doCondJump: + valuePtr = OBJ_AT_TOS; + + /* TODO - check claim that taking address of b harms performance */ + /* TODO - consider optimization search for constants */ + result = TclGetBooleanFromObj(interp, valuePtr, &b); + if (result != TCL_OK) { + TRACE_WITH_OBJ(("%d => ERROR: ", jmpOffset[ + ((*pc == INST_JUMP_FALSE1) || (*pc == INST_JUMP_FALSE4)) + ? 0 : 1]), Tcl_GetObjResult(interp)); + goto checkForCatch; + } + +#ifdef TCL_COMPILE_DEBUG + if (b) { + if ((*pc == INST_JUMP_TRUE1) || (*pc == INST_JUMP_TRUE4)) { + TRACE(("%d => %.20s true, new pc %u\n", jmpOffset[1], + O2S(valuePtr), + (unsigned)(pc + jmpOffset[1] - codePtr->codeStart))); } else { - result = Tcl_GetBooleanFromObj((Tcl_Interp *) NULL, value2Ptr, &i2); + TRACE(("%d => %.20s true\n", jmpOffset[0], O2S(valuePtr))); } - if (result != TCL_OK) { - TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(value2Ptr), - (t2Ptr? t2Ptr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, value2Ptr); - CACHE_STACK_INFO(); - goto checkForCatch; + } else { + if ((*pc == INST_JUMP_TRUE1) || (*pc == INST_JUMP_TRUE4)) { + TRACE(("%d => %.20s false\n", jmpOffset[0], O2S(valuePtr))); + } else { + TRACE(("%d => %.20s false, new pc %u\n", jmpOffset[0], + O2S(valuePtr), + (unsigned)(pc + jmpOffset[1] - codePtr->codeStart))); } } +#endif + NEXT_INST_F(jmpOffset[b], 1, 0); + } + + case INST_JUMP_TABLE: { + Tcl_HashEntry *hPtr; + JumptableInfo *jtPtr; + int opnd; /* - * Reuse the valuePtr object already on stack if possible. + * Jump to location looked up in a hashtable; fall through to next + * instr if lookup fails. */ - + + opnd = TclGetInt4AtPtr(pc+1); + jtPtr = (JumptableInfo *) codePtr->auxDataArrayPtr[opnd].clientData; + TRACE(("%d => %.20s ", opnd, O2S(OBJ_AT_TOS))); + hPtr = Tcl_FindHashEntry(&jtPtr->hashTable, TclGetString(OBJ_AT_TOS)); + if (hPtr != NULL) { + int jumpOffset = PTR2INT(Tcl_GetHashValue(hPtr)); + + TRACE_APPEND(("found in table, new pc %u\n", + (unsigned)(pc - codePtr->codeStart + jumpOffset))); + NEXT_INST_F(jumpOffset, 1, 0); + } else { + TRACE_APPEND(("not found in table\n")); + NEXT_INST_F(5, 1, 0); + } + } + + /* + * These two instructions are now redundant: the complete logic of the LOR + * and LAND is now handled by the expression compiler. + */ + + case INST_LOR: + case INST_LAND: { + /* + * Operands must be boolean or numeric. No int->double conversions are + * performed. + */ + + int i1, i2, iResult; + Tcl_Obj *value2Ptr = OBJ_AT_TOS; + Tcl_Obj *valuePtr = OBJ_UNDER_TOS; + + result = TclGetBooleanFromObj(NULL, valuePtr, &i1); + if (result != TCL_OK) { + TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto checkForCatch; + } + + result = TclGetBooleanFromObj(NULL, value2Ptr, &i2); + if (result != TCL_OK) { + TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(value2Ptr), + (value2Ptr->typePtr? value2Ptr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, value2Ptr); + CACHE_STACK_INFO(); + goto checkForCatch; + } + if (*pc == INST_LOR) { iResult = (i1 || i2); } else { iResult = (i1 && i2); } - if (Tcl_IsShared(valuePtr)) { - objResultPtr = Tcl_NewLongObj(iResult); - TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), iResult)); - NEXT_INST_F(1, 2, 1); - } else { /* reuse the valuePtr object */ - TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), iResult)); - Tcl_SetLongObj(valuePtr, iResult); - NEXT_INST_F(1, 1, 0); - } + objResultPtr = constants[iResult]; + TRACE(("%.20s %.20s => %d\n", O2S(valuePtr),O2S(value2Ptr),iResult)); + NEXT_INST_F(1, 2, 1); } /* * --------------------------------------------------------- - * Start of INST_LIST and related instructions. + * Start of INST_LIST and related instructions. */ - case INST_LIST: + case INST_LIST: { /* - * Pop the opnd (objc) top stack elements into a new list obj - * and then decrement their ref counts. + * Pop the opnd (objc) top stack elements into a new list obj and then + * decrement their ref counts. */ + int opnd; + opnd = TclGetUInt4AtPtr(pc+1); - objResultPtr = Tcl_NewListObj(opnd, &(stackPtr[stackTop - (opnd-1)])); + objResultPtr = Tcl_NewListObj(opnd, &OBJ_AT_DEPTH(opnd-1)); TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr); NEXT_INST_V(5, opnd, 1); + } - case INST_LIST_LENGTH: - valuePtr = stackPtr[stackTop]; + case INST_LIST_LENGTH: { + Tcl_Obj *valuePtr; + int length; - result = Tcl_ListObjLength(interp, valuePtr, &length); - if (result != TCL_OK) { + valuePtr = OBJ_AT_TOS; + + result = TclListObjLength(interp, valuePtr, &length); + if (result == TCL_OK) { + TclNewIntObj(objResultPtr, length); + TRACE(("%.20s => %d\n", O2S(valuePtr), length)); + NEXT_INST_F(1, 1, 1); + } else { TRACE_WITH_OBJ(("%.30s => ERROR: ", O2S(valuePtr)), - Tcl_GetObjResult(interp)); + Tcl_GetObjResult(interp)); goto checkForCatch; } - objResultPtr = Tcl_NewIntObj(length); - TRACE(("%.20s => %d\n", O2S(valuePtr), length)); - NEXT_INST_F(1, 1, 1); - - case INST_LIST_INDEX: + } + + case INST_LIST_INDEX: { /*** lindex with objc == 3 ***/ - + + /* Variables also for INST_LIST_INDEX_IMM */ + + int listc, idx, opnd, pcAdjustment; + Tcl_Obj **listv; + Tcl_Obj *valuePtr, *value2Ptr; + /* - * Pop the two operands + * Pop the two operands. */ - value2Ptr = stackPtr[stackTop]; - valuePtr = stackPtr[stackTop- 1]; + + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; /* - * Extract the desired list element + * Extract the desired list element. */ + + result = TclListObjGetElements(interp, valuePtr, &listc, &listv); + if ((result == TCL_OK) && (value2Ptr->typePtr != &tclListType) + && (TclGetIntForIndexM(NULL , value2Ptr, listc-1, + &idx) == TCL_OK)) { + TclDecrRefCount(value2Ptr); + tosPtr--; + pcAdjustment = 1; + goto lindexFastPath; + } + objResultPtr = TclLindexList(interp, valuePtr, value2Ptr); - if (objResultPtr == NULL) { - TRACE_WITH_OBJ(("%.30s %.30s => ERROR: ", O2S(valuePtr), O2S(value2Ptr)), - Tcl_GetObjResult(interp)); + if (objResultPtr) { + /* + * Stash the list element on the stack. + */ + + TRACE(("%.20s %.20s => %s\n", + O2S(valuePtr), O2S(value2Ptr), O2S(objResultPtr))); + NEXT_INST_F(1, 2, -1); /* Already has the correct refCount */ + } else { + TRACE_WITH_OBJ(("%.30s %.30s => ERROR: ", O2S(valuePtr), + O2S(value2Ptr)), Tcl_GetObjResult(interp)); result = TCL_ERROR; goto checkForCatch; } + case INST_LIST_INDEX_IMM: + /*** lindex with objc==3 and index in bytecode stream ***/ + + pcAdjustment = 5; + /* - * Stash the list element on the stack + * Pop the list and get the index. */ - TRACE(("%.20s %.20s => %s\n", - O2S(valuePtr), O2S(value2Ptr), O2S(objResultPtr))); - NEXT_INST_F(1, 2, -1); /* already has the correct refCount */ - case INST_LIST_INDEX_MULTI: - { + valuePtr = OBJ_AT_TOS; + opnd = TclGetInt4AtPtr(pc+1); + + /* + * Get the contents of the list, making sure that it really is a list + * in the process. + */ + + result = TclListObjGetElements(interp, valuePtr, &listc, &listv); + + if (result == TCL_OK) { + /* + * Select the list item based on the index. Negative operand means + * end-based indexing. + */ + + if (opnd < -1) { + idx = opnd+1 + listc; + } else { + idx = opnd; + } + + lindexFastPath: + if (idx >= 0 && idx < listc) { + objResultPtr = listv[idx]; + } else { + TclNewObj(objResultPtr); + } + + TRACE_WITH_OBJ(("\"%.30s\" %d => ", O2S(valuePtr), opnd), + objResultPtr); + NEXT_INST_F(pcAdjustment, 1, 1); + } else { + TRACE_WITH_OBJ(("\"%.30s\" %d => ERROR: ", O2S(valuePtr), opnd), + Tcl_GetObjResult(interp)); + goto checkForCatch; + } + } + + case INST_LIST_INDEX_MULTI: { /* * 'lindex' with multiple index args: * * Determine the count of index args. */ - int numIdx; + int numIdx, opnd; opnd = TclGetUInt4AtPtr(pc+1); numIdx = opnd-1; @@ -2499,143 +3862,318 @@ TclExecuteByteCode(interp, codePtr) /* * Do the 'lindex' operation. */ - objResultPtr = TclLindexFlat(interp, stackPtr[stackTop - numIdx], - numIdx, stackPtr + stackTop - numIdx + 1); + + objResultPtr = TclLindexFlat(interp, OBJ_AT_DEPTH(numIdx), + numIdx, &OBJ_AT_DEPTH(numIdx - 1)); /* - * Check for errors + * Check for errors. */ - if (objResultPtr == NULL) { + + if (objResultPtr) { + /* + * Set result. + */ + + TRACE(("%d => %s\n", opnd, O2S(objResultPtr))); + NEXT_INST_V(5, opnd, -1); + } else { TRACE_WITH_OBJ(("%d => ERROR: ", opnd), Tcl_GetObjResult(interp)); result = TCL_ERROR; goto checkForCatch; } - - /* - * Set result - */ - TRACE(("%d => %s\n", opnd, O2S(objResultPtr))); - NEXT_INST_V(5, opnd, -1); } - case INST_LSET_FLAT: - { + case INST_LSET_FLAT: { /* - * Lset with 3, 5, or more args. Get the number - * of index args. + * Lset with 3, 5, or more args. Get the number of index args. */ - int numIdx; - opnd = TclGetUInt4AtPtr( pc + 1 ); + int numIdx,opnd; + Tcl_Obj *valuePtr, *value2Ptr; + + opnd = TclGetUInt4AtPtr(pc + 1); numIdx = opnd - 2; /* - * Get the old value of variable, and remove the stack ref. - * This is safe because the variable still references the - * object; the ref count will never go zero here. + * Get the old value of variable, and remove the stack ref. This is + * safe because the variable still references the object; the ref + * count will never go zero here - we can use the smaller macro + * Tcl_DecrRefCount. */ + value2Ptr = POP_OBJECT(); - TclDecrRefCount(value2Ptr); /* This one should be done here */ + Tcl_DecrRefCount(value2Ptr); /* This one should be done here */ /* * Get the new element value. */ - valuePtr = stackPtr[stackTop]; + + valuePtr = OBJ_AT_TOS; /* - * Compute the new variable value + * Compute the new variable value. */ - objResultPtr = TclLsetFlat(interp, value2Ptr, numIdx, - stackPtr + stackTop - numIdx, valuePtr); + objResultPtr = TclLsetFlat(interp, value2Ptr, numIdx, + &OBJ_AT_DEPTH(numIdx), valuePtr); /* - * Check for errors + * Check for errors. */ - if (objResultPtr == NULL) { + + if (objResultPtr) { + /* + * Set result. + */ + + TRACE(("%d => %s\n", opnd, O2S(objResultPtr))); + NEXT_INST_V(5, (numIdx+1), -1); + } else { TRACE_WITH_OBJ(("%d => ERROR: ", opnd), Tcl_GetObjResult(interp)); result = TCL_ERROR; goto checkForCatch; } + } + case INST_LSET_LIST: { /* - * Set result + * 'lset' with 4 args. */ - TRACE(("%d => %s\n", opnd, O2S(objResultPtr))); - NEXT_INST_V(5, (numIdx+1), -1); - } - case INST_LSET_LIST: + Tcl_Obj *objPtr, *valuePtr, *value2Ptr; + /* - * 'lset' with 4 args. - * - * Get the old value of variable, and remove the stack ref. - * This is safe because the variable still references the - * object; the ref count will never go zero here. + * Get the old value of variable, and remove the stack ref. This is + * safe because the variable still references the object; the ref + * count will never go zero here - we can use the smaller macro + * Tcl_DecrRefCount. */ - objPtr = POP_OBJECT(); - TclDecrRefCount(objPtr); /* This one should be done here */ - + + objPtr = POP_OBJECT(); + Tcl_DecrRefCount(objPtr); /* This one should be done here. */ + /* - * Get the new element value, and the index list + * Get the new element value, and the index list. */ - valuePtr = stackPtr[stackTop]; - value2Ptr = stackPtr[stackTop - 1]; - + + valuePtr = OBJ_AT_TOS; + value2Ptr = OBJ_UNDER_TOS; + /* - * Compute the new variable value + * Compute the new variable value. */ + objResultPtr = TclLsetList(interp, objPtr, value2Ptr, valuePtr); /* - * Check for errors + * Check for errors. */ - if (objResultPtr == NULL) { + + if (objResultPtr) { + /* + * Set result. + */ + + TRACE(("=> %s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, -1); + } else { TRACE_WITH_OBJ(("\"%.30s\" => ERROR: ", O2S(value2Ptr)), - Tcl_GetObjResult(interp)); + Tcl_GetObjResult(interp)); result = TCL_ERROR; goto checkForCatch; } + } + + case INST_LIST_RANGE_IMM: { + /*** lrange with objc==4 and both indices in bytecode stream ***/ + + int listc, fromIdx, toIdx; + Tcl_Obj **listv, *valuePtr; + + /* + * Pop the list and get the indices. + */ + + valuePtr = OBJ_AT_TOS; + fromIdx = TclGetInt4AtPtr(pc+1); + toIdx = TclGetInt4AtPtr(pc+5); + + /* + * Get the contents of the list, making sure that it really is a list + * in the process. + */ + result = TclListObjGetElements(interp, valuePtr, &listc, &listv); + + /* + * Skip a lot of work if we're about to throw the result away (common + * with uses of [lassign]). + */ + + if (result == TCL_OK) { +#ifndef TCL_COMPILE_DEBUG + if (*(pc+9) == INST_POP) { + NEXT_INST_F(10, 1, 0); + } +#endif + } else { + TRACE_WITH_OBJ(("\"%.30s\" %d %d => ERROR: ", O2S(valuePtr), + fromIdx, toIdx), Tcl_GetObjResult(interp)); + goto checkForCatch; + } + + /* + * Adjust the indices for end-based handling. + */ + + if (fromIdx < -1) { + fromIdx += 1+listc; + if (fromIdx < -1) { + fromIdx = -1; + } + } else if (fromIdx > listc) { + fromIdx = listc; + } + if (toIdx < -1) { + toIdx += 1+listc; + if (toIdx < -1) { + toIdx = -1; + } + } else if (toIdx > listc) { + toIdx = listc; + } /* - * Set result + * Check if we are referring to a valid, non-empty list range, and if + * so, build the list of elements in that range. */ - TRACE(("=> %s\n", O2S(objResultPtr))); - NEXT_INST_F(1, 2, -1); + + if (fromIdx<=toIdx && fromIdx<listc && toIdx>=0) { + if (fromIdx<0) { + fromIdx = 0; + } + if (toIdx >= listc) { + toIdx = listc-1; + } + objResultPtr = Tcl_NewListObj(toIdx-fromIdx+1, listv+fromIdx); + } else { + TclNewObj(objResultPtr); + } + + TRACE_WITH_OBJ(("\"%.30s\" %d %d => ", O2S(valuePtr), + TclGetInt4AtPtr(pc+1), TclGetInt4AtPtr(pc+5)), objResultPtr); + NEXT_INST_F(9, 1, 1); + } + + case INST_LIST_IN: + case INST_LIST_NOT_IN: { + /* + * Basic list containment operators. + */ + + int found, s1len, s2len, llen, i; + Tcl_Obj *valuePtr, *value2Ptr, *o; + char *s1; + const char *s2; + + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + + /* TODO: Consider more efficient tests than strcmp() */ + s1 = TclGetStringFromObj(valuePtr, &s1len); + result = TclListObjLength(interp, value2Ptr, &llen); + if (result != TCL_OK) { + TRACE_WITH_OBJ(("\"%.30s\" \"%.30s\" => ERROR: ", O2S(valuePtr), + O2S(value2Ptr)), Tcl_GetObjResult(interp)); + goto checkForCatch; + } + found = 0; + if (llen > 0) { + /* + * An empty list doesn't match anything. + */ + + i = 0; + do { + Tcl_ListObjIndex(NULL, value2Ptr, i, &o); + if (o != NULL) { + s2 = TclGetStringFromObj(o, &s2len); + } else { + s2 = ""; + } + if (s1len == s2len) { + found = (strcmp(s1, s2) == 0); + } + i++; + } while (i < llen && found == 0); + } + + if (*pc == INST_LIST_NOT_IN) { + found = !found; + } + + TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), found)); + + /* + * Peep-hole optimisation: if you're about to jump, do jump from here. + * We're saving the effort of pushing a boolean value only to pop it + * for branching. + */ + + pc++; +#ifndef TCL_COMPILE_DEBUG + switch (*pc) { + case INST_JUMP_FALSE1: + NEXT_INST_F((found ? 2 : TclGetInt1AtPtr(pc+1)), 2, 0); + case INST_JUMP_TRUE1: + NEXT_INST_F((found ? TclGetInt1AtPtr(pc+1) : 2), 2, 0); + case INST_JUMP_FALSE4: + NEXT_INST_F((found ? 5 : TclGetInt4AtPtr(pc+1)), 2, 0); + case INST_JUMP_TRUE4: + NEXT_INST_F((found ? TclGetInt4AtPtr(pc+1) : 5), 2, 0); + } +#endif + objResultPtr = constants[found]; + NEXT_INST_F(0, 2, 1); + } /* - * End of INST_LIST and related instructions. + * End of INST_LIST and related instructions. * --------------------------------------------------------- */ case INST_STR_EQ: - case INST_STR_NEQ: - { + case INST_STR_NEQ: { /* * String (in)equality check + * TODO: Consider merging into INST_STR_CMP */ + int iResult; + Tcl_Obj *valuePtr, *value2Ptr; - value2Ptr = stackPtr[stackTop]; - valuePtr = stackPtr[stackTop - 1]; + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; if (valuePtr == value2Ptr) { /* - * On the off-chance that the objects are the same, - * we don't really have to think hard about equality. + * On the off-chance that the objects are the same, we don't + * really have to think hard about equality. */ + iResult = (*pc == INST_STR_EQ); } else { char *s1, *s2; int s1len, s2len; - s1 = Tcl_GetStringFromObj(valuePtr, &s1len); - s2 = Tcl_GetStringFromObj(value2Ptr, &s2len); + s1 = TclGetStringFromObj(valuePtr, &s1len); + s2 = TclGetStringFromObj(value2Ptr, &s2len); if (s1len == s2len) { /* - * We only need to check (in)equality when - * we have equal length strings. + * We only need to check (in)equality when we have equal + * length strings. */ + if (*pc == INST_STR_NEQ) { iResult = (strcmp(s1, s2) != 0); } else { @@ -2647,63 +4185,66 @@ TclExecuteByteCode(interp, codePtr) } } - TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), iResult)); + TRACE(("%.20s %.20s => %d\n", O2S(valuePtr),O2S(value2Ptr),iResult)); /* - * Peep-hole optimisation: if you're about to jump, do jump - * from here. + * Peep-hole optimisation: if you're about to jump, do jump from here. */ pc++; #ifndef TCL_COMPILE_DEBUG switch (*pc) { - case INST_JUMP_FALSE1: - NEXT_INST_F((iResult? 2 : TclGetInt1AtPtr(pc+1)), 2, 0); - case INST_JUMP_TRUE1: - NEXT_INST_F((iResult? TclGetInt1AtPtr(pc+1) : 2), 2, 0); - case INST_JUMP_FALSE4: - NEXT_INST_F((iResult? 5 : TclGetInt4AtPtr(pc+1)), 2, 0); - case INST_JUMP_TRUE4: - NEXT_INST_F((iResult? TclGetInt4AtPtr(pc+1) : 5), 2, 0); + case INST_JUMP_FALSE1: + NEXT_INST_F((iResult? 2 : TclGetInt1AtPtr(pc+1)), 2, 0); + case INST_JUMP_TRUE1: + NEXT_INST_F((iResult? TclGetInt1AtPtr(pc+1) : 2), 2, 0); + case INST_JUMP_FALSE4: + NEXT_INST_F((iResult? 5 : TclGetInt4AtPtr(pc+1)), 2, 0); + case INST_JUMP_TRUE4: + NEXT_INST_F((iResult? TclGetInt4AtPtr(pc+1) : 5), 2, 0); } #endif - objResultPtr = Tcl_NewIntObj(iResult); + objResultPtr = constants[iResult]; NEXT_INST_F(0, 2, 1); } - case INST_STR_CMP: - { + case INST_STR_CMP: { /* - * String compare + * String compare. */ - CONST char *s1, *s2; + + const char *s1, *s2; int s1len, s2len, iResult; + Tcl_Obj *valuePtr, *value2Ptr; - value2Ptr = stackPtr[stackTop]; - valuePtr = stackPtr[stackTop - 1]; + stringCompare: + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; /* - * The comparison function should compare up to the - * minimum byte length only. + * The comparison function should compare up to the minimum byte + * length only. */ + if (valuePtr == value2Ptr) { /* - * In the pure equality case, set lengths too for - * the checks below (or we could goto beyond it). + * In the pure equality case, set lengths too for the checks below + * (or we could goto beyond it). */ + iResult = s1len = s2len = 0; } else if ((valuePtr->typePtr == &tclByteArrayType) - && (value2Ptr->typePtr == &tclByteArrayType)) { + && (value2Ptr->typePtr == &tclByteArrayType)) { s1 = (char *) Tcl_GetByteArrayFromObj(valuePtr, &s1len); s2 = (char *) Tcl_GetByteArrayFromObj(value2Ptr, &s2len); - iResult = memcmp(s1, s2, - (size_t) ((s1len < s2len) ? s1len : s2len)); + iResult = memcmp(s1, s2, + (size_t) ((s1len < s2len) ? s1len : s2len)); } else if (((valuePtr->typePtr == &tclStringType) - && (value2Ptr->typePtr == &tclStringType))) { + && (value2Ptr->typePtr == &tclStringType))) { /* * Do a unicode-specific comparison if both of the args are of - * String type. If the char length == byte length, we can do a - * memcmp. In benchmark testing this proved the most efficient + * String type. If the char length == byte length, we can do a + * memcmp. In benchmark testing this proved the most efficient * check between the unicode and string comparison operations. */ @@ -2719,64 +4260,96 @@ TclExecuteByteCode(interp, codePtr) } } else { /* - * We can't do a simple memcmp in order to handle the - * special Tcl \xC0\x80 null encoding for utf-8. + * We can't do a simple memcmp in order to handle the special Tcl + * \xC0\x80 null encoding for utf-8. */ - s1 = Tcl_GetStringFromObj(valuePtr, &s1len); - s2 = Tcl_GetStringFromObj(value2Ptr, &s2len); + + s1 = TclGetStringFromObj(valuePtr, &s1len); + s2 = TclGetStringFromObj(value2Ptr, &s2len); iResult = TclpUtfNcmp2(s1, s2, - (size_t) ((s1len < s2len) ? s1len : s2len)); + (size_t) ((s1len < s2len) ? s1len : s2len)); } /* * Make sure only -1,0,1 is returned + * TODO: consider peephole opt. */ + if (iResult == 0) { iResult = s1len - s2len; } + + if (*pc != INST_STR_CMP) { + /* + * Take care of the opcodes that goto'ed into here. + */ + + switch (*pc) { + case INST_EQ: + iResult = (iResult == 0); + break; + case INST_NEQ: + iResult = (iResult != 0); + break; + case INST_LT: + iResult = (iResult < 0); + break; + case INST_GT: + iResult = (iResult > 0); + break; + case INST_LE: + iResult = (iResult <= 0); + break; + case INST_GE: + iResult = (iResult >= 0); + break; + } + } if (iResult < 0) { - iResult = -1; - } else if (iResult > 0) { - iResult = 1; + TclNewIntObj(objResultPtr, -1); + TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), -1)); + } else { + objResultPtr = constants[(iResult>0)]; + TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), + (iResult > 0))); } - objResultPtr = Tcl_NewIntObj(iResult); - TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), iResult)); NEXT_INST_F(1, 2, 1); } - case INST_STR_LEN: - { - int length1; - - valuePtr = stackPtr[stackTop]; + case INST_STR_LEN: { + int length; + Tcl_Obj *valuePtr; + + valuePtr = OBJ_AT_TOS; if (valuePtr->typePtr == &tclByteArrayType) { - (void) Tcl_GetByteArrayFromObj(valuePtr, &length1); + (void) Tcl_GetByteArrayFromObj(valuePtr, &length); } else { - length1 = Tcl_GetCharLength(valuePtr); + length = Tcl_GetCharLength(valuePtr); } - objResultPtr = Tcl_NewIntObj(length1); - TRACE(("%.20s => %d\n", O2S(valuePtr), length1)); + TclNewIntObj(objResultPtr, length); + TRACE(("%.20s => %d\n", O2S(valuePtr), length)); NEXT_INST_F(1, 1, 1); } - - case INST_STR_INDEX: - { + + case INST_STR_INDEX: { /* - * String compare + * String compare. */ - int index; - bytes = NULL; /* lint */ - value2Ptr = stackPtr[stackTop]; - valuePtr = stackPtr[stackTop - 1]; + int index, length; + char *bytes; + Tcl_Obj *valuePtr, *value2Ptr; + + bytes = NULL; /* lint */ + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; /* - * If we have a ByteArray object, avoid indexing in the - * Utf string since the byte array contains one byte per - * character. Otherwise, use the Unicode string rep to - * get the index'th char. + * If we have a ByteArray object, avoid indexing in the Utf string + * since the byte array contains one byte per character. Otherwise, + * use the Unicode string rep to get the index'th char. */ if (valuePtr->typePtr == &tclByteArrayType) { @@ -2785,10 +4358,11 @@ TclExecuteByteCode(interp, codePtr) /* * Get Unicode char length to calulate what 'end' means. */ + length = Tcl_GetCharLength(valuePtr); } - result = TclGetIntForIndex(interp, value2Ptr, length - 1, &index); + result = TclGetIntForIndexM(interp, value2Ptr, length - 1, &index); if (result != TCL_OK) { goto checkForCatch; } @@ -2796,21 +4370,22 @@ TclExecuteByteCode(interp, codePtr) if ((index >= 0) && (index < length)) { if (valuePtr->typePtr == &tclByteArrayType) { objResultPtr = Tcl_NewByteArrayObj((unsigned char *) - (&bytes[index]), 1); + (&bytes[index]), 1); } else if (valuePtr->bytes && length == valuePtr->length) { - objResultPtr = Tcl_NewStringObj((CONST char *) - (&valuePtr->bytes[index]), 1); + objResultPtr = Tcl_NewStringObj((const char *) + (&valuePtr->bytes[index]), 1); } else { char buf[TCL_UTF_MAX]; Tcl_UniChar ch; ch = Tcl_GetUniChar(valuePtr, index); + /* - * This could be: - * Tcl_NewUnicodeObj((CONST Tcl_UniChar *)&ch, 1) - * but creating the object as a string seems to be - * faster in practical use. + * This could be: Tcl_NewUnicodeObj((const Tcl_UniChar *)&ch, + * 1) but creating the object as a string seems to be faster + * in practical use. */ + length = Tcl_UniCharToUtf(ch, buf); objResultPtr = Tcl_NewStringObj(buf, length); } @@ -2818,26 +4393,26 @@ TclExecuteByteCode(interp, codePtr) TclNewObj(objResultPtr); } - TRACE(("%.20s %.20s => %s\n", O2S(valuePtr), O2S(value2Ptr), - O2S(objResultPtr))); + TRACE(("%.20s %.20s => %s\n", O2S(valuePtr), O2S(value2Ptr), + O2S(objResultPtr))); NEXT_INST_F(1, 2, 1); } - case INST_STR_MATCH: - { + case INST_STR_MATCH: { int nocase, match; + Tcl_Obj *valuePtr, *value2Ptr; - nocase = TclGetInt1AtPtr(pc+1); - valuePtr = stackPtr[stackTop]; /* String */ - value2Ptr = stackPtr[stackTop - 1]; /* Pattern */ + nocase = TclGetInt1AtPtr(pc+1); + valuePtr = OBJ_AT_TOS; /* String */ + value2Ptr = OBJ_UNDER_TOS; /* Pattern */ /* - * Check that at least one of the objects is Unicode before - * promoting both. + * Check that at least one of the objects is Unicode before promoting + * both. */ if ((valuePtr->typePtr == &tclStringType) - || (value2Ptr->typePtr == &tclStringType)) { + || (value2Ptr->typePtr == &tclStringType)) { Tcl_UniChar *ustring1, *ustring2; int length1, length2; @@ -2845,23 +4420,60 @@ TclExecuteByteCode(interp, codePtr) ustring2 = Tcl_GetUnicodeFromObj(value2Ptr, &length2); match = TclUniCharMatch(ustring1, length1, ustring2, length2, nocase); + } else if ((valuePtr->typePtr == &tclByteArrayType) && !nocase) { + unsigned char *string1, *string2; + int length1, length2; + + string1 = Tcl_GetByteArrayFromObj(valuePtr, &length1); + string2 = Tcl_GetByteArrayFromObj(value2Ptr, &length2); + match = TclByteArrayMatch(string1, length1, string2, length2, 0); } else { match = Tcl_StringCaseMatch(TclGetString(valuePtr), TclGetString(value2Ptr), nocase); } /* - * Reuse value2Ptr object already on stack if possible. - * Adjustment is 2 due to the nocase byte + * Reuse value2Ptr object already on stack if possible. Adjustment is + * 2 due to the nocase byte + * TODO: consider peephole opt. */ TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), match)); - if (Tcl_IsShared(value2Ptr)) { - objResultPtr = Tcl_NewIntObj(match); + objResultPtr = constants[match]; + NEXT_INST_F(2, 2, 1); + } + + case INST_REGEXP: { + int cflags, match; + Tcl_Obj *valuePtr, *value2Ptr; + Tcl_RegExp regExpr; + + cflags = TclGetInt1AtPtr(pc+1); /* RE compile flages like NOCASE */ + valuePtr = OBJ_AT_TOS; /* String */ + value2Ptr = OBJ_UNDER_TOS; /* Pattern */ + + regExpr = Tcl_GetRegExpFromObj(interp, value2Ptr, cflags); + if (regExpr == NULL) { + match = -1; + } else { + match = Tcl_RegExpExecObj(interp, regExpr, valuePtr, 0, 0, 0); + } + + /* + * Adjustment is 2 due to the nocase byte + */ + + if (match < 0) { + objResultPtr = Tcl_GetObjResult(interp); + TRACE_WITH_OBJ(("%.20s %.20s => ERROR: ", + O2S(valuePtr), O2S(value2Ptr)), objResultPtr); + result = TCL_ERROR; + goto checkForCatch; + } else { + TRACE(("%.20s %.20s => %d\n", + O2S(valuePtr), O2S(value2Ptr), match)); + objResultPtr = constants[match]; NEXT_INST_F(2, 2, 1); - } else { /* reuse the valuePtr object */ - Tcl_SetIntObj(value2Ptr, match); - NEXT_INST_F(2, 1, 0); } } @@ -2870,1441 +4482,2277 @@ TclExecuteByteCode(interp, codePtr) case INST_LT: case INST_GT: case INST_LE: - case INST_GE: - { - /* - * Any type is allowed but the two operands must have the - * same type. We will compute value op value2. - */ - - Tcl_ObjType *t1Ptr, *t2Ptr; - char *s1 = NULL; /* Init. avoids compiler warning. */ - char *s2 = NULL; /* Init. avoids compiler warning. */ - long i2 = 0; /* Init. avoids compiler warning. */ - double d1 = 0.0; /* Init. avoids compiler warning. */ - double d2 = 0.0; /* Init. avoids compiler warning. */ - long iResult = 0; /* Init. avoids compiler warning. */ + case INST_GE: { + Tcl_Obj *valuePtr = OBJ_UNDER_TOS; + Tcl_Obj *value2Ptr = OBJ_AT_TOS; + ClientData ptr1, ptr2; + int iResult = 0, compare = 0, type1, type2; + double d1, d2, tmp; + long l1, l2; + mp_int big1, big2; +#ifndef NO_WIDE_TYPE + Tcl_WideInt w1, w2; +#endif - value2Ptr = stackPtr[stackTop]; - valuePtr = stackPtr[stackTop - 1]; + if (GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) { + /* + * At least one non-numeric argument - compare as strings. + */ - /* - * Be careful in the equal-object case; 'NaN' isn't supposed - * to be equal to even itself. [Bug 761471] - */ + goto stringCompare; + } + if (type1 == TCL_NUMBER_NAN) { + /* + * NaN first arg: NaN != to everything, other compares are false. + */ - t1Ptr = valuePtr->typePtr; + iResult = (*pc == INST_NEQ); + goto foundResult; + } if (valuePtr == value2Ptr) { + compare = MP_EQ; + goto convertComparison; + } + if (GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2) != TCL_OK) { /* - * If we are numeric already, we can proceed to the main - * equality check right now. Otherwise, we need to try to - * coerce to a numeric type so we can see if we've got a - * NaN but haven't parsed it as numeric. + * At least one non-numeric argument - compare as strings. */ - if (!IS_NUMERIC_TYPE(t1Ptr)) { - if (t1Ptr == &tclListType) { - int length; - /* - * Only a list of length 1 can be NaN or such - * things. - */ - (void) Tcl_ListObjLength(NULL, valuePtr, &length); - if (length == 1) { - goto mustConvertForNaNCheck; - } - } else { - /* - * Too bad, we'll have to compute the string and - * try the conversion - */ - mustConvertForNaNCheck: - s1 = Tcl_GetStringFromObj(valuePtr, &length); - if (TclLooksLikeInt(s1, length)) { - GET_WIDE_OR_INT(iResult, valuePtr, i, w); - } else { - (void) Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, - valuePtr, &d1); - } - t1Ptr = valuePtr->typePtr; - } - } + goto stringCompare; + } + if (type2 == TCL_NUMBER_NAN) { + /* + * NaN 2nd arg: NaN != to everything, other compares are false. + */ - switch (*pc) { - case INST_EQ: - case INST_LE: - case INST_GE: - iResult = !((t1Ptr == &tclDoubleType) - && IS_NAN(valuePtr->internalRep.doubleValue)); - break; - case INST_LT: - case INST_GT: - iResult = 0; - break; - case INST_NEQ: - iResult = ((t1Ptr == &tclDoubleType) - && IS_NAN(valuePtr->internalRep.doubleValue)); - break; - } + iResult = (*pc == INST_NEQ); goto foundResult; } + switch (type1) { + case TCL_NUMBER_LONG: + l1 = *((const long *)ptr1); + switch (type2) { + case TCL_NUMBER_LONG: + l2 = *((const long *)ptr2); + longCompare: + compare = (l1 < l2) ? MP_LT : ((l1 > l2) ? MP_GT : MP_EQ); + break; +#ifndef NO_WIDE_TYPE + case TCL_NUMBER_WIDE: + w2 = *((const Tcl_WideInt *)ptr2); + w1 = (Tcl_WideInt)l1; + goto wideCompare; +#endif + case TCL_NUMBER_DOUBLE: + d2 = *((const double *)ptr2); + d1 = (double) l1; - t2Ptr = value2Ptr->typePtr; + /* + * If the double has a fractional part, or if the long can be + * converted to double without loss of precision, then compare + * as doubles. + */ - /* - * We only want to coerce numeric validation if neither type - * is NULL. A NULL type means the arg is essentially an empty - * object ("", {} or [list]). - */ - if (!( (!t1Ptr && !valuePtr->bytes) - || (valuePtr->bytes && !valuePtr->length) - || (!t2Ptr && !value2Ptr->bytes) - || (value2Ptr->bytes && !value2Ptr->length))) { - if (!IS_NUMERIC_TYPE(t1Ptr)) { - s1 = Tcl_GetStringFromObj(valuePtr, &length); - if (TclLooksLikeInt(s1, length)) { - GET_WIDE_OR_INT(iResult, valuePtr, i, w); - } else { - (void) Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, - valuePtr, &d1); + if (DBL_MANT_DIG > CHAR_BIT*sizeof(long) + || l1 == (long) d1 + || modf(d2, &tmp) != 0.0) { + goto doubleCompare; } - t1Ptr = valuePtr->typePtr; - } - if (!IS_NUMERIC_TYPE(t2Ptr)) { - s2 = Tcl_GetStringFromObj(value2Ptr, &length); - if (TclLooksLikeInt(s2, length)) { - GET_WIDE_OR_INT(iResult, value2Ptr, i2, w); - } else { - (void) Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, - value2Ptr, &d2); - } - t2Ptr = value2Ptr->typePtr; - } - } - if (!IS_NUMERIC_TYPE(t1Ptr) || !IS_NUMERIC_TYPE(t2Ptr)) { - /* - * One operand is not numeric. Compare as strings. NOTE: - * strcmp is not correct for \x00 < \x01, but that is - * unlikely to occur here. We could use the TclUtfNCmp2 - * to handle this. - */ - int s1len, s2len; - s1 = Tcl_GetStringFromObj(valuePtr, &s1len); - s2 = Tcl_GetStringFromObj(value2Ptr, &s2len); - switch (*pc) { - case INST_EQ: - if (s1len == s2len) { - iResult = (strcmp(s1, s2) == 0); - } else { - iResult = 0; - } - break; - case INST_NEQ: - if (s1len == s2len) { - iResult = (strcmp(s1, s2) != 0); - } else { - iResult = 1; - } - break; - case INST_LT: - iResult = (strcmp(s1, s2) < 0); - break; - case INST_GT: - iResult = (strcmp(s1, s2) > 0); - break; - case INST_LE: - iResult = (strcmp(s1, s2) <= 0); + + /* + * Otherwise, to make comparision based on full precision, + * need to convert the double to a suitably sized integer. + * + * Need this to get comparsions like + * expr 20000000000000003 < 20000000000000004.0 + * right. Converting the first argument to double will yield + * two double values that are equivalent within double + * precision. Converting the double to an integer gets done + * exactly, then integer comparison can tell the difference. + */ + + if (d2 < (double)LONG_MIN) { + compare = MP_GT; break; - case INST_GE: - iResult = (strcmp(s1, s2) >= 0); + } + if (d2 > (double)LONG_MAX) { + compare = MP_LT; break; + } + l2 = (long) d2; + goto longCompare; + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + if (mp_cmp_d(&big2, 0) == MP_LT) { + compare = MP_GT; + } else { + compare = MP_LT; + } + mp_clear(&big2); } - } else if ((t1Ptr == &tclDoubleType) - || (t2Ptr == &tclDoubleType)) { - /* - * Compare as doubles. - */ - if (t1Ptr == &tclDoubleType) { - d1 = valuePtr->internalRep.doubleValue; - GET_DOUBLE_VALUE(d2, value2Ptr, t2Ptr); - } else { /* t1Ptr is integer, t2Ptr is double */ - GET_DOUBLE_VALUE(d1, valuePtr, t1Ptr); - d2 = value2Ptr->internalRep.doubleValue; - } - switch (*pc) { - case INST_EQ: - iResult = d1 == d2; - break; - case INST_NEQ: - iResult = d1 != d2; - break; - case INST_LT: - iResult = d1 < d2; - break; - case INST_GT: - iResult = d1 > d2; - break; - case INST_LE: - iResult = d1 <= d2; + break; + +#ifndef NO_WIDE_TYPE + case TCL_NUMBER_WIDE: + w1 = *((const Tcl_WideInt *)ptr1); + switch (type2) { + case TCL_NUMBER_WIDE: + w2 = *((const Tcl_WideInt *)ptr2); + wideCompare: + compare = (w1 < w2) ? MP_LT : ((w1 > w2) ? MP_GT : MP_EQ); + break; + case TCL_NUMBER_LONG: + l2 = *((const long *)ptr2); + w2 = (Tcl_WideInt)l2; + goto wideCompare; + case TCL_NUMBER_DOUBLE: + d2 = *((const double *)ptr2); + d1 = (double) w1; + if (DBL_MANT_DIG > CHAR_BIT*sizeof(Tcl_WideInt) + || w1 == (Tcl_WideInt) d1 + || modf(d2, &tmp) != 0.0) { + goto doubleCompare; + } + if (d2 < (double)LLONG_MIN) { + compare = MP_GT; break; - case INST_GE: - iResult = d1 >= d2; + } + if (d2 > (double)LLONG_MAX) { + compare = MP_LT; break; + } + w2 = (Tcl_WideInt) d2; + goto wideCompare; + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + if (mp_cmp_d(&big2, 0) == MP_LT) { + compare = MP_GT; + } else { + compare = MP_LT; + } + mp_clear(&big2); } - } else if ((t1Ptr == &tclWideIntType) - || (t2Ptr == &tclWideIntType)) { - Tcl_WideInt w2; - /* - * Compare as wide ints (neither are doubles) - */ - if (t1Ptr == &tclIntType) { - w = Tcl_LongAsWide(valuePtr->internalRep.longValue); - TclGetWide(w2,value2Ptr); - } else if (t2Ptr == &tclIntType) { - TclGetWide(w,valuePtr); - w2 = Tcl_LongAsWide(value2Ptr->internalRep.longValue); - } else { - TclGetWide(w,valuePtr); - TclGetWide(w2,value2Ptr); - } - switch (*pc) { - case INST_EQ: - iResult = w == w2; + break; +#endif + + case TCL_NUMBER_DOUBLE: + d1 = *((const double *)ptr1); + switch (type2) { + case TCL_NUMBER_DOUBLE: + d2 = *((const double *)ptr2); + doubleCompare: + compare = (d1 < d2) ? MP_LT : ((d1 > d2) ? MP_GT : MP_EQ); + break; + case TCL_NUMBER_LONG: + l2 = *((const long *)ptr2); + d2 = (double) l2; + if (DBL_MANT_DIG > CHAR_BIT*sizeof(long) + || l2 == (long) d2 + || modf(d1, &tmp) != 0.0) { + goto doubleCompare; + } + if (d1 < (double)LONG_MIN) { + compare = MP_LT; break; - case INST_NEQ: - iResult = w != w2; + } + if (d1 > (double)LONG_MAX) { + compare = MP_GT; break; - case INST_LT: - iResult = w < w2; + } + l1 = (long) d1; + goto longCompare; +#ifndef NO_WIDE_TYPE + case TCL_NUMBER_WIDE: + w2 = *((const Tcl_WideInt *)ptr2); + d2 = (double) w2; + if (DBL_MANT_DIG > CHAR_BIT*sizeof(Tcl_WideInt) + || w2 == (Tcl_WideInt) d2 + || modf(d1, &tmp) != 0.0) { + goto doubleCompare; + } + if (d1 < (double)LLONG_MIN) { + compare = MP_LT; break; - case INST_GT: - iResult = w > w2; + } + if (d1 > (double)LLONG_MAX) { + compare = MP_GT; break; - case INST_LE: - iResult = w <= w2; + } + w1 = (Tcl_WideInt) d1; + goto wideCompare; +#endif + case TCL_NUMBER_BIG: + if (TclIsInfinite(d1)) { + compare = (d1 > 0.0) ? MP_GT : MP_LT; break; - case INST_GE: - iResult = w >= w2; + } + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + if ((d1 < (double)LONG_MAX) && (d1 > (double)LONG_MIN)) { + if (mp_cmp_d(&big2, 0) == MP_LT) { + compare = MP_GT; + } else { + compare = MP_LT; + } + mp_clear(&big2); break; + } + if (DBL_MANT_DIG > CHAR_BIT*sizeof(long) + && modf(d1, &tmp) != 0.0) { + d2 = TclBignumToDouble(&big2); + mp_clear(&big2); + goto doubleCompare; + } + Tcl_InitBignumFromDouble(NULL, d1, &big1); + goto bigCompare; } - } else { - /* - * Compare as ints. - */ - i = valuePtr->internalRep.longValue; - i2 = value2Ptr->internalRep.longValue; - switch (*pc) { - case INST_EQ: - iResult = i == i2; - break; - case INST_NEQ: - iResult = i != i2; - break; - case INST_LT: - iResult = i < i2; - break; - case INST_GT: - iResult = i > i2; - break; - case INST_LE: - iResult = i <= i2; + break; + + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + switch (type2) { +#ifndef NO_WIDE_TYPE + case TCL_NUMBER_WIDE: +#endif + case TCL_NUMBER_LONG: + compare = mp_cmp_d(&big1, 0); + mp_clear(&big1); + break; + case TCL_NUMBER_DOUBLE: + d2 = *((const double *)ptr2); + if (TclIsInfinite(d2)) { + compare = (d2 > 0.0) ? MP_LT : MP_GT; + mp_clear(&big1); break; - case INST_GE: - iResult = i >= i2; + } + if ((d2 < (double)LONG_MAX) && (d2 > (double)LONG_MIN)) { + compare = mp_cmp_d(&big1, 0); + mp_clear(&big1); break; + } + if (DBL_MANT_DIG > CHAR_BIT*sizeof(long) + && modf(d2, &tmp) != 0.0) { + d1 = TclBignumToDouble(&big1); + mp_clear(&big1); + goto doubleCompare; + } + Tcl_InitBignumFromDouble(NULL, d2, &big2); + goto bigCompare; + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + bigCompare: + compare = mp_cmp(&big1, &big2); + mp_clear(&big1); + mp_clear(&big2); } } - foundResult: - TRACE(("%.20s %.20s => %ld\n", O2S(valuePtr), O2S(value2Ptr), iResult)); + /* + * Turn comparison outcome into appropriate result for opcode. + */ + + convertComparison: + switch (*pc) { + case INST_EQ: + iResult = (compare == MP_EQ); + break; + case INST_NEQ: + iResult = (compare != MP_EQ); + break; + case INST_LT: + iResult = (compare == MP_LT); + break; + case INST_GT: + iResult = (compare == MP_GT); + break; + case INST_LE: + iResult = (compare != MP_GT); + break; + case INST_GE: + iResult = (compare != MP_LT); + break; + } /* - * Peep-hole optimisation: if you're about to jump, do jump - * from here. + * Peep-hole optimisation: if you're about to jump, do jump from here. */ + foundResult: pc++; #ifndef TCL_COMPILE_DEBUG switch (*pc) { - case INST_JUMP_FALSE1: - NEXT_INST_F((iResult? 2 : TclGetInt1AtPtr(pc+1)), 2, 0); - case INST_JUMP_TRUE1: - NEXT_INST_F((iResult? TclGetInt1AtPtr(pc+1) : 2), 2, 0); - case INST_JUMP_FALSE4: - NEXT_INST_F((iResult? 5 : TclGetInt4AtPtr(pc+1)), 2, 0); - case INST_JUMP_TRUE4: - NEXT_INST_F((iResult? TclGetInt4AtPtr(pc+1) : 5), 2, 0); + case INST_JUMP_FALSE1: + NEXT_INST_F((iResult? 2 : TclGetInt1AtPtr(pc+1)), 2, 0); + case INST_JUMP_TRUE1: + NEXT_INST_F((iResult? TclGetInt1AtPtr(pc+1) : 2), 2, 0); + case INST_JUMP_FALSE4: + NEXT_INST_F((iResult? 5 : TclGetInt4AtPtr(pc+1)), 2, 0); + case INST_JUMP_TRUE4: + NEXT_INST_F((iResult? TclGetInt4AtPtr(pc+1) : 5), 2, 0); } #endif - objResultPtr = Tcl_NewIntObj(iResult); + objResultPtr = constants[iResult]; NEXT_INST_F(0, 2, 1); } case INST_MOD: case INST_LSHIFT: - case INST_RSHIFT: - case INST_BITOR: - case INST_BITXOR: - case INST_BITAND: - { - /* - * Only integers are allowed. We compute value op value2. - */ - - long i2 = 0, rem, negative; - long iResult = 0; /* Init. avoids compiler warning. */ - Tcl_WideInt w2, wResult = W0; - int doWide = 0; - - value2Ptr = stackPtr[stackTop]; - valuePtr = stackPtr[stackTop - 1]; - if (valuePtr->typePtr == &tclIntType) { - i = valuePtr->internalRep.longValue; - } else if (valuePtr->typePtr == &tclWideIntType) { - TclGetWide(w,valuePtr); - } else { /* try to convert to int */ - REQUIRE_WIDE_OR_INT(result, valuePtr, i, w); - if (result != TCL_OK) { - TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n", - O2S(valuePtr), O2S(value2Ptr), - (valuePtr->typePtr? - valuePtr->typePtr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, valuePtr); - CACHE_STACK_INFO(); - goto checkForCatch; - } + case INST_RSHIFT: { + Tcl_Obj *value2Ptr = OBJ_AT_TOS; + Tcl_Obj *valuePtr = OBJ_UNDER_TOS; + ClientData ptr1, ptr2; + int invalid, shift, type1, type2; + long l1 = 0; + + result = GetNumberFromObj(NULL, valuePtr, &ptr1, &type1); + if ((result != TCL_OK) || (type1 == TCL_NUMBER_DOUBLE) + || (type1 == TCL_NUMBER_NAN)) { + result = TCL_ERROR; + TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n", O2S(valuePtr), + O2S(value2Ptr), (valuePtr->typePtr? + valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto checkForCatch; } - if (value2Ptr->typePtr == &tclIntType) { - i2 = value2Ptr->internalRep.longValue; - } else if (value2Ptr->typePtr == &tclWideIntType) { - TclGetWide(w2,value2Ptr); - } else { - REQUIRE_WIDE_OR_INT(result, value2Ptr, i2, w2); - if (result != TCL_OK) { - TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n", - O2S(valuePtr), O2S(value2Ptr), - (value2Ptr->typePtr? - value2Ptr->typePtr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, value2Ptr); - CACHE_STACK_INFO(); - goto checkForCatch; - } + + result = GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2); + if ((result != TCL_OK) || (type2 == TCL_NUMBER_DOUBLE) + || (type2 == TCL_NUMBER_NAN)) { + result = TCL_ERROR; + TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n", O2S(valuePtr), + O2S(value2Ptr), (value2Ptr->typePtr? + value2Ptr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, value2Ptr); + CACHE_STACK_INFO(); + goto checkForCatch; } - switch (*pc) { - case INST_MOD: - /* - * This code is tricky: C doesn't guarantee much about - * the quotient or remainder, but Tcl does. The - * remainder always has the same sign as the divisor and - * a smaller absolute value. - */ - if (value2Ptr->typePtr == &tclWideIntType && w2 == W0) { - if (valuePtr->typePtr == &tclIntType) { - TRACE(("%ld "LLD" => DIVIDE BY ZERO\n", i, w2)); - } else { - TRACE((LLD" "LLD" => DIVIDE BY ZERO\n", w, w2)); + if (*pc == INST_MOD) { + /* TODO: Attempts to re-use unshared operands on stack */ + + long l2 = 0; /* silence gcc warning */ + + if (type2 == TCL_NUMBER_LONG) { + l2 = *((const long *)ptr2); + if (l2 == 0) { + TRACE(("%s %s => DIVIDE BY ZERO\n", O2S(valuePtr), + O2S(value2Ptr))); + goto divideByZero; } - goto divideByZero; - } - if (value2Ptr->typePtr == &tclIntType && i2 == 0) { - if (valuePtr->typePtr == &tclIntType) { - TRACE(("%ld %ld => DIVIDE BY ZERO\n", i, i2)); - } else { - TRACE((LLD" %ld => DIVIDE BY ZERO\n", w, i2)); + if ((l2 == 1) || (l2 == -1)) { + /* + * Div. by |1| always yields remainder of 0. + */ + + objResultPtr = constants[0]; + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - goto divideByZero; } - negative = 0; - if (valuePtr->typePtr == &tclWideIntType - || value2Ptr->typePtr == &tclWideIntType) { - Tcl_WideInt wRemainder; + if (type1 == TCL_NUMBER_LONG) { + l1 = *((const long *)ptr1); + if (l1 == 0) { + /* + * 0 % (non-zero) always yields remainder of 0. + */ + + objResultPtr = constants[0]; + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + if (type2 == TCL_NUMBER_LONG) { + /* + * Both operands are long; do native calculation. + */ + + long lRemainder, lQuotient = l1 / l2; + + /* + * Force Tcl's integer division rules. + * TODO: examine for logic simplification + */ + + if ((lQuotient < 0 || (lQuotient == 0 && + ((l1 < 0 && l2 > 0) || (l1 > 0 && l2 < 0)))) && + (lQuotient * l2 != l1)) { + lQuotient -= 1; + } + lRemainder = l1 - l2*lQuotient; + TclNewLongObj(objResultPtr, lRemainder); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + /* - * Promote to wide + * First operand fits in long; second does not, so the second + * has greater magnitude than first. No need to divide to + * determine the remainder. */ - if (valuePtr->typePtr == &tclIntType) { - w = Tcl_LongAsWide(i); - } else if (value2Ptr->typePtr == &tclIntType) { - w2 = Tcl_LongAsWide(i2); + +#ifndef NO_WIDE_TYPE + if (type2 == TCL_NUMBER_WIDE) { + Tcl_WideInt w2 = *((const Tcl_WideInt *)ptr2); + + if ((l1 > 0) ^ (w2 > (Tcl_WideInt)0)) { + /* + * Arguments are opposite sign; remainder is sum. + */ + + objResultPtr = Tcl_NewWideIntObj(w2+(Tcl_WideInt)l1); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + + /* + * Arguments are same sign; remainder is first operand. + */ + + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } - if (w2 < 0) { - w2 = -w2; - w = -w; - negative = 1; +#endif + { + mp_int big2; + + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + + /* TODO: internals intrusion */ + if ((l1 > 0) ^ (big2.sign == MP_ZPOS)) { + /* + * Arguments are opposite sign; remainder is sum. + */ + + mp_int big1; + + TclBNInitBignumFromLong(&big1, l1); + mp_add(&big2, &big1, &big2); + mp_clear(&big1); + objResultPtr = Tcl_NewBignumObj(&big2); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + + /* + * Arguments are same sign; remainder is first operand. + */ + + mp_clear(&big2); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } - wRemainder = w % w2; - if (wRemainder < 0) { - wRemainder += w2; + } +#ifndef NO_WIDE_TYPE + if (type1 == TCL_NUMBER_WIDE) { + Tcl_WideInt w1 = *((const Tcl_WideInt *)ptr1); + + if (type2 != TCL_NUMBER_BIG) { + Tcl_WideInt w2, wQuotient, wRemainder; + + Tcl_GetWideIntFromObj(NULL, value2Ptr, &w2); + wQuotient = w1 / w2; + + /* + * Force Tcl's integer division rules. + * TODO: examine for logic simplification + */ + + if (((wQuotient < (Tcl_WideInt) 0) + || ((wQuotient == (Tcl_WideInt) 0) + && ((w1 < (Tcl_WideInt)0 && w2 > (Tcl_WideInt)0) + || (w1 > (Tcl_WideInt)0 && w2 < (Tcl_WideInt)0)))) + && (wQuotient * w2 != w1)) { + wQuotient -= (Tcl_WideInt) 1; + } + wRemainder = w1 - w2*wQuotient; + objResultPtr = Tcl_NewWideIntObj(wRemainder); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - if (negative) { - wRemainder = -wRemainder; + { + mp_int big2; + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + + /* TODO: internals intrusion */ + if ((w1 > ((Tcl_WideInt) 0)) ^ (big2.sign == MP_ZPOS)) { + /* + * Arguments are opposite sign; remainder is sum. + */ + + mp_int big1; + + TclBNInitBignumFromWideInt(&big1, w1); + mp_add(&big2, &big1, &big2); + mp_clear(&big1); + objResultPtr = Tcl_NewBignumObj(&big2); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + + /* + * Arguments are same sign; remainder is first operand. + */ + + mp_clear(&big2); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } - wResult = wRemainder; - doWide = 1; - break; - } - if (i2 < 0) { - i2 = -i2; - i = -i; - negative = 1; - } - rem = i % i2; - if (rem < 0) { - rem += i2; } - if (negative) { - rem = -rem; +#endif + { + mp_int big1, big2, bigResult, bigRemainder; + + Tcl_GetBignumFromObj(NULL, valuePtr, &big1); + Tcl_GetBignumFromObj(NULL, value2Ptr, &big2); + mp_init(&bigResult); + mp_init(&bigRemainder); + mp_div(&big1, &big2, &bigResult, &bigRemainder); + if (!mp_iszero(&bigRemainder) + && (bigRemainder.sign != big2.sign)) { + /* + * Convert to Tcl's integer division rules. + */ + + mp_sub_d(&bigResult, 1, &bigResult); + mp_add(&bigRemainder, &big2, &bigRemainder); + } + mp_copy(&bigRemainder, &bigResult); + mp_clear(&bigRemainder); + mp_clear(&big1); + mp_clear(&big2); + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewBignumObj(&bigResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetBignumObj(valuePtr, &bigResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } - iResult = rem; + } + + /* + * Reject negative shift argument. + */ + + switch (type2) { + case TCL_NUMBER_LONG: + invalid = (*((const long *)ptr2) < (long)0); + break; +#ifndef NO_WIDE_TYPE + case TCL_NUMBER_WIDE: + invalid = (*((const Tcl_WideInt *)ptr2) < (Tcl_WideInt)0); break; - case INST_LSHIFT: +#endif + case TCL_NUMBER_BIG: { + mp_int big2; + + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + invalid = (mp_cmp_d(&big2, 0) == MP_LT); + mp_clear(&big2); + break; + } + default: + /* Unused, here to silence compiler warning */ + invalid = 0; + } + if (invalid) { + Tcl_SetObjResult(interp, + Tcl_NewStringObj("negative shift argument", -1)); + result = TCL_ERROR; + goto checkForCatch; + } + + /* + * Zero shifted any number of bits is still zero. + */ + + if ((type1==TCL_NUMBER_LONG) && (*((const long *)ptr1) == (long)0)) { + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = constants[0]; + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + + if (*pc == INST_LSHIFT) { /* - * Shifts are never usefully 64-bits wide! + * Large left shifts create integer overflow. + * + * BEWARE! Can't use Tcl_GetIntFromObj() here because that + * converts values in the (unsigned) range to their signed int + * counterparts, leading to incorrect results. */ - FORCE_LONG(value2Ptr, i2, w2); - if (valuePtr->typePtr == &tclWideIntType) { -#ifdef TCL_COMPILE_DEBUG - w2 = Tcl_LongAsWide(i2); -#endif /* TCL_COMPILE_DEBUG */ - wResult = w; + + if ((type2 != TCL_NUMBER_LONG) + || (*((const long *)ptr2) > (long) INT_MAX)) { /* - * Shift in steps when the shift gets large to prevent - * annoying compiler/processor bugs. [Bug 868467] + * Technically, we could hold the value (1 << (INT_MAX+1)) in + * an mp_int, but since we're using mp_mul_2d() to do the + * work, and it takes only an int argument, that's a good + * place to draw the line. */ - if (i2 >= 64) { - wResult = Tcl_LongAsWide(0); - } else if (i2 > 60) { - wResult = w << 30; - wResult <<= 30; - wResult <<= i2-60; - } else if (i2 > 30) { - wResult = w << 30; - wResult <<= i2-30; - } else { - wResult = w << i2; - } - doWide = 1; - break; + + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "integer value too large to represent", -1)); + result = TCL_ERROR; + goto checkForCatch; } + shift = (int)(*((const long *)ptr2)); + /* - * Shift in steps when the shift gets large to prevent - * annoying compiler/processor bugs. [Bug 868467] + * Handle shifts within the native long range. */ - if (i2 >= 64) { - iResult = 0; - } else if (i2 > 60) { - iResult = i << 30; - iResult <<= 30; - iResult <<= i2-60; - } else if (i2 > 30) { - iResult = i << 30; - iResult <<= i2-30; - } else { - iResult = i << i2; + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if ((type1 == TCL_NUMBER_LONG) + && (size_t) shift < CHAR_BIT*sizeof(long) + && ((l1 = *(const long *)ptr1) != 0) + && !((l1>0 ? l1 : ~l1) + & -(1L<<(CHAR_BIT*sizeof(long) - 1 - shift)))) { + TclNewLongObj(objResultPtr, (l1<<shift)); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - break; - case INST_RSHIFT: + /* - * The following code is a bit tricky: it ensures that - * right shifts propagate the sign bit even on machines - * where ">>" won't do it by default. + * Handle shifts within the native wide range. */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if ((type1 != TCL_NUMBER_BIG) + && ((size_t)shift < CHAR_BIT*sizeof(Tcl_WideInt))) { + Tcl_WideInt w; + + TclGetWideIntFromObj(NULL, valuePtr, &w); + if (!((w>0 ? w : ~w) + & -(((Tcl_WideInt)1) + << (CHAR_BIT*sizeof(Tcl_WideInt) - 1 - shift)))) { + objResultPtr = Tcl_NewWideIntObj(w<<shift); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + } + } else { /* - * Shifts are never usefully 64-bits wide! + * Quickly force large right shifts to 0 or -1. */ - FORCE_LONG(value2Ptr, i2, w2); - if (valuePtr->typePtr == &tclWideIntType) { -#ifdef TCL_COMPILE_DEBUG - w2 = Tcl_LongAsWide(i2); -#endif /* TCL_COMPILE_DEBUG */ - if (w < 0) { - wResult = ~w; - } else { - wResult = w; - } + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if ((type2 != TCL_NUMBER_LONG) + || (*(const long *)ptr2 > INT_MAX)) { /* - * Shift in steps when the shift gets large to prevent - * annoying compiler/processor bugs. [Bug 868467] + * Again, technically, the value to be shifted could be an + * mp_int so huge that a right shift by (INT_MAX+1) bits could + * not take us to the result of 0 or -1, but since we're using + * mp_div_2d to do the work, and it takes only an int + * argument, we draw the line there. */ - if (i2 >= 64) { - wResult = Tcl_LongAsWide(0); - } else if (i2 > 60) { - wResult >>= 30; - wResult >>= 30; - wResult >>= i2-60; - } else if (i2 > 30) { - wResult >>= 30; - wResult >>= i2-30; + + int zero; + + switch (type1) { + case TCL_NUMBER_LONG: + zero = (*(const long *)ptr1 > 0L); + break; +#ifndef NO_WIDE_TYPE + case TCL_NUMBER_WIDE: + zero = (*(const Tcl_WideInt *)ptr1 > (Tcl_WideInt)0); + break; +#endif + case TCL_NUMBER_BIG: { + mp_int big1; + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + zero = (mp_cmp_d(&big1, 0) == MP_GT); + mp_clear(&big1); + break; + } + default: + /* Unused, here to silence compiler warning. */ + zero = 0; + } + if (zero) { + objResultPtr = constants[0]; } else { - wResult >>= i2; + TclNewIntObj(objResultPtr, -1); } - if (w < 0) { - wResult = ~wResult; + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + shift = (int)(*(const long *)ptr2); + + /* + * Handle shifts within the native long range. + */ + + if (type1 == TCL_NUMBER_LONG) { + l1 = *((const long *)ptr1); + if ((size_t)shift >= CHAR_BIT*sizeof(long)) { + if (l1 >= (long)0) { + objResultPtr = constants[0]; + } else { + TclNewIntObj(objResultPtr, -1); + } + } else { + TclNewLongObj(objResultPtr, (l1 >> shift)); } - doWide = 1; - break; + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + +#ifndef NO_WIDE_TYPE + /* + * Handle shifts within the native wide range. + */ + + if (type1 == TCL_NUMBER_WIDE) { + Tcl_WideInt w = *(const Tcl_WideInt *)ptr1; + + if ((size_t)shift >= CHAR_BIT*sizeof(Tcl_WideInt)) { + if (w >= (Tcl_WideInt)0) { + objResultPtr = constants[0]; + } else { + TclNewIntObj(objResultPtr, -1); + } + } else { + objResultPtr = Tcl_NewWideIntObj(w >> shift); + } + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - if (i < 0) { - iResult = ~i; +#endif + } + + { + mp_int big, bigResult, bigRemainder; + + Tcl_TakeBignumFromObj(NULL, valuePtr, &big); + + mp_init(&bigResult); + if (*pc == INST_LSHIFT) { + mp_mul_2d(&big, shift, &bigResult); } else { - iResult = i; + mp_init(&bigRemainder); + mp_div_2d(&big, shift, &bigResult, &bigRemainder); + if (mp_cmp_d(&bigRemainder, 0) == MP_LT) { + /* + * Convert to Tcl's integer division rules. + */ + + mp_sub_d(&bigResult, 1, &bigResult); + } + mp_clear(&bigRemainder); + } + mp_clear(&big); + + if (!Tcl_IsShared(valuePtr)) { + Tcl_SetBignumObj(valuePtr, &bigResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } + objResultPtr = Tcl_NewBignumObj(&bigResult); + } + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + + case INST_BITOR: + case INST_BITXOR: + case INST_BITAND: { + ClientData ptr1, ptr2; + int type1, type2; + Tcl_Obj *value2Ptr = OBJ_AT_TOS; + Tcl_Obj *valuePtr = OBJ_UNDER_TOS; + + result = GetNumberFromObj(NULL, valuePtr, &ptr1, &type1); + if ((result != TCL_OK) + || (type1 == TCL_NUMBER_NAN) + || (type1 == TCL_NUMBER_DOUBLE)) { + result = TCL_ERROR; + TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n", O2S(valuePtr), + O2S(value2Ptr), (valuePtr->typePtr? + valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto checkForCatch; + } + result = GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2); + if ((result != TCL_OK) || (type2 == TCL_NUMBER_NAN) + || (type2 == TCL_NUMBER_DOUBLE)) { + result = TCL_ERROR; + TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n", O2S(valuePtr), + O2S(value2Ptr), (value2Ptr->typePtr? + value2Ptr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, value2Ptr); + CACHE_STACK_INFO(); + goto checkForCatch; + } + + if ((type1 == TCL_NUMBER_BIG) || (type2 == TCL_NUMBER_BIG)) { + mp_int big1, big2, bigResult, *First, *Second; + int numPos; + + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + /* - * Shift in steps when the shift gets large to prevent - * annoying compiler/processor bugs. [Bug 868467] + * Count how many positive arguments we have. If only one of the + * arguments is negative, store it in 'Second'. */ - if (i2 >= 64) { - iResult = 0; - } else if (i2 > 60) { - iResult >>= 30; - iResult >>= 30; - iResult >>= i2-60; - } else if (i2 > 30) { - iResult >>= 30; - iResult >>= i2-30; + + if (mp_cmp_d(&big1, 0) != MP_LT) { + numPos = 1 + (mp_cmp_d(&big2, 0) != MP_LT); + First = &big1; + Second = &big2; } else { - iResult >>= i2; - } - if (i < 0) { - iResult = ~iResult; + First = &big2; + Second = &big1; + numPos = (mp_cmp_d(First, 0) != MP_LT); } - break; - case INST_BITOR: - if (valuePtr->typePtr == &tclWideIntType - || value2Ptr->typePtr == &tclWideIntType) { - /* - * Promote to wide - */ - if (valuePtr->typePtr == &tclIntType) { - w = Tcl_LongAsWide(i); - } else if (value2Ptr->typePtr == &tclIntType) { - w2 = Tcl_LongAsWide(i2); + mp_init(&bigResult); + + switch (*pc) { + case INST_BITAND: + switch (numPos) { + case 2: + /* + * Both arguments positive, base case. + */ + + mp_and(First, Second, &bigResult); + break; + case 1: + /* + * First is positive; second negative: + * P & N = P & ~~N = P&~(-N-1) = P & (P ^ (-N-1)) + */ + + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_xor(First, Second, &bigResult); + mp_and(First, &bigResult, &bigResult); + break; + case 0: + /* + * Both arguments negative: + * a & b = ~ (~a | ~b) = -(-a-1|-b-1)-1 + */ + + mp_neg(First, First); + mp_sub_d(First, 1, First); + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_or(First, Second, &bigResult); + mp_neg(&bigResult, &bigResult); + mp_sub_d(&bigResult, 1, &bigResult); + break; } - wResult = w | w2; - doWide = 1; break; - } - iResult = i | i2; - break; - case INST_BITXOR: - if (valuePtr->typePtr == &tclWideIntType - || value2Ptr->typePtr == &tclWideIntType) { - /* - * Promote to wide - */ - if (valuePtr->typePtr == &tclIntType) { - w = Tcl_LongAsWide(i); - } else if (value2Ptr->typePtr == &tclIntType) { - w2 = Tcl_LongAsWide(i2); + + case INST_BITOR: + switch (numPos) { + case 2: + /* + * Both arguments positive, base case. + */ + + mp_or(First, Second, &bigResult); + break; + case 1: + /* + * First is positive; second negative: + * N|P = ~(~N&~P) = ~((-N-1)&~P) = -((-N-1)&((-N-1)^P))-1 + */ + + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_xor(First, Second, &bigResult); + mp_and(Second, &bigResult, &bigResult); + mp_neg(&bigResult, &bigResult); + mp_sub_d(&bigResult, 1, &bigResult); + break; + case 0: + /* + * Both arguments negative: + * a | b = ~ (~a & ~b) = -(-a-1&-b-1)-1 + */ + + mp_neg(First, First); + mp_sub_d(First, 1, First); + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_and(First, Second, &bigResult); + mp_neg(&bigResult, &bigResult); + mp_sub_d(&bigResult, 1, &bigResult); + break; } - wResult = w ^ w2; - doWide = 1; break; - } - iResult = i ^ i2; - break; - case INST_BITAND: - if (valuePtr->typePtr == &tclWideIntType - || value2Ptr->typePtr == &tclWideIntType) { - /* - * Promote to wide - */ - if (valuePtr->typePtr == &tclIntType) { - w = Tcl_LongAsWide(i); - } else if (value2Ptr->typePtr == &tclIntType) { - w2 = Tcl_LongAsWide(i2); + + case INST_BITXOR: + switch (numPos) { + case 2: + /* + * Both arguments positive, base case. + */ + + mp_xor(First, Second, &bigResult); + break; + case 1: + /* + * First is positive; second negative: + * P^N = ~(P^~N) = -(P^(-N-1))-1 + */ + + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_xor(First, Second, &bigResult); + mp_neg(&bigResult, &bigResult); + mp_sub_d(&bigResult, 1, &bigResult); + break; + case 0: + /* + * Both arguments negative: + * a ^ b = (~a ^ ~b) = (-a-1^-b-1) + */ + + mp_neg(First, First); + mp_sub_d(First, 1, First); + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_xor(First, Second, &bigResult); + break; } - wResult = w & w2; - doWide = 1; break; } - iResult = i & i2; - break; + + mp_clear(&big1); + mp_clear(&big2); + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewBignumObj(&bigResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetBignumObj(valuePtr, &bigResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } - /* - * Reuse the valuePtr object already on stack if possible. - */ - - if (Tcl_IsShared(valuePtr)) { - if (doWide) { +#ifndef NO_WIDE_TYPE + if ((type1 == TCL_NUMBER_WIDE) || (type2 == TCL_NUMBER_WIDE)) { + Tcl_WideInt wResult, w1, w2; + + TclGetWideIntFromObj(NULL, valuePtr, &w1); + TclGetWideIntFromObj(NULL, value2Ptr, &w2); + + switch (*pc) { + case INST_BITAND: + wResult = w1 & w2; + break; + case INST_BITOR: + wResult = w1 | w2; + break; + case INST_BITXOR: + wResult = w1 ^ w2; + break; + default: + /* Unused, here to silence compiler warning. */ + wResult = 0; + } + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { objResultPtr = Tcl_NewWideIntObj(wResult); - TRACE((LLD" "LLD" => "LLD"\n", w, w2, wResult)); - } else { - objResultPtr = Tcl_NewLongObj(iResult); - TRACE(("%ld %ld => %ld\n", i, i2, iResult)); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - NEXT_INST_F(1, 2, 1); - } else { /* reuse the valuePtr object */ - if (doWide) { - TRACE((LLD" "LLD" => "LLD"\n", w, w2, wResult)); - Tcl_SetWideIntObj(valuePtr, wResult); - } else { - TRACE(("%ld %ld => %ld\n", i, i2, iResult)); - Tcl_SetLongObj(valuePtr, iResult); + Tcl_SetWideIntObj(valuePtr, wResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } +#endif + { + long lResult, l1 = *((const long *)ptr1); + long l2 = *((const long *)ptr2); + + switch (*pc) { + case INST_BITAND: + lResult = l1 & l2; + break; + case INST_BITOR: + lResult = l1 | l2; + break; + case INST_BITXOR: + lResult = l1 ^ l2; + break; + default: + /* Unused, here to silence compiler warning. */ + lResult = 0; } + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr, lResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + TclSetLongObj(valuePtr, lResult); + TRACE(("%s\n", O2S(valuePtr))); NEXT_INST_F(1, 1, 0); } } + case INST_EXPON: case INST_ADD: case INST_SUB: - case INST_MULT: case INST_DIV: - { - /* - * Operands must be numeric and ints get converted to floats - * if necessary. We compute value op value2. - */ + case INST_MULT: { + ClientData ptr1, ptr2; + int type1, type2; + Tcl_Obj *value2Ptr = OBJ_AT_TOS; + Tcl_Obj *valuePtr = OBJ_UNDER_TOS; + + result = GetNumberFromObj(NULL, valuePtr, &ptr1, &type1); + if ((result != TCL_OK) +#ifndef ACCEPT_NAN + || (type1 == TCL_NUMBER_NAN) +#endif + ) { + result = TCL_ERROR; + TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n", + O2S(value2Ptr), O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name: "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto checkForCatch; + } - Tcl_ObjType *t1Ptr, *t2Ptr; - long i2 = 0, quot, rem; /* Init. avoids compiler warning. */ - double d1, d2; - long iResult = 0; /* Init. avoids compiler warning. */ - double dResult = 0.0; /* Init. avoids compiler warning. */ - int doDouble = 0; /* 1 if doing floating arithmetic */ - Tcl_WideInt w2, wquot, wrem; - Tcl_WideInt wResult = W0; /* Init. avoids compiler warning. */ - int doWide = 0; /* 1 if doing wide arithmetic. */ - - value2Ptr = stackPtr[stackTop]; - valuePtr = stackPtr[stackTop - 1]; - t1Ptr = valuePtr->typePtr; - t2Ptr = value2Ptr->typePtr; - - if (t1Ptr == &tclIntType) { - i = valuePtr->internalRep.longValue; - } else if (t1Ptr == &tclWideIntType) { - TclGetWide(w,valuePtr); - } else if ((t1Ptr == &tclDoubleType) - && (valuePtr->bytes == NULL)) { +#ifdef ACCEPT_NAN + if (type1 == TCL_NUMBER_NAN) { /* - * We can only use the internal rep directly if there is - * no string rep. Otherwise the string rep might actually - * look like an integer, which is preferred. + * NaN first argument -> result is also NaN. */ - d1 = valuePtr->internalRep.doubleValue; - } else { - char *s = Tcl_GetStringFromObj(valuePtr, &length); - if (TclLooksLikeInt(s, length)) { - GET_WIDE_OR_INT(result, valuePtr, i, w); - } else { - result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, - valuePtr, &d1); - } - if (result != TCL_OK) { - TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n", - s, O2S(valuePtr), - (valuePtr->typePtr? - valuePtr->typePtr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, valuePtr); - CACHE_STACK_INFO(); - goto checkForCatch; - } - t1Ptr = valuePtr->typePtr; + NEXT_INST_F(1, 1, 0); } +#endif - if (t2Ptr == &tclIntType) { - i2 = value2Ptr->internalRep.longValue; - } else if (t2Ptr == &tclWideIntType) { - TclGetWide(w2,value2Ptr); - } else if ((t2Ptr == &tclDoubleType) - && (value2Ptr->bytes == NULL)) { + result = GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2); + if ((result != TCL_OK) +#ifndef ACCEPT_NAN + || (type2 == TCL_NUMBER_NAN) +#endif + ) { + result = TCL_ERROR; + TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n", + O2S(value2Ptr), O2S(valuePtr), + (value2Ptr->typePtr? value2Ptr->typePtr->name: "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, value2Ptr); + CACHE_STACK_INFO(); + goto checkForCatch; + } + +#ifdef ACCEPT_NAN + if (type2 == TCL_NUMBER_NAN) { /* - * We can only use the internal rep directly if there is - * no string rep. Otherwise the string rep might actually - * look like an integer, which is preferred. + * NaN second argument -> result is also NaN. */ - d2 = value2Ptr->internalRep.doubleValue; - } else { - char *s = Tcl_GetStringFromObj(value2Ptr, &length); - if (TclLooksLikeInt(s, length)) { - GET_WIDE_OR_INT(result, value2Ptr, i2, w2); - } else { - result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, - value2Ptr, &d2); - } - if (result != TCL_OK) { - TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n", - O2S(value2Ptr), s, - (value2Ptr->typePtr? - value2Ptr->typePtr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, value2Ptr); - CACHE_STACK_INFO(); - goto checkForCatch; - } - t2Ptr = value2Ptr->typePtr; + objResultPtr = value2Ptr; + NEXT_INST_F(1, 2, 1); } +#endif - if ((t1Ptr == &tclDoubleType) || (t2Ptr == &tclDoubleType)) { + if ((type1 == TCL_NUMBER_DOUBLE) || (type2 == TCL_NUMBER_DOUBLE)) { /* - * Do double arithmetic. + * At least one of the values is floating-point, so perform + * floating point calculations. */ - doDouble = 1; - if (t1Ptr == &tclIntType) { - d1 = i; /* promote value 1 to double */ - } else if (t2Ptr == &tclIntType) { - d2 = i2; /* promote value 2 to double */ - } else if (t1Ptr == &tclWideIntType) { - d1 = Tcl_WideAsDouble(w); - } else if (t2Ptr == &tclWideIntType) { - d2 = Tcl_WideAsDouble(w2); - } + + double d1, d2, dResult; + + Tcl_GetDoubleFromObj(NULL, valuePtr, &d1); + Tcl_GetDoubleFromObj(NULL, value2Ptr, &d2); + switch (*pc) { - case INST_ADD: - dResult = d1 + d2; - break; - case INST_SUB: - dResult = d1 - d2; - break; - case INST_MULT: - dResult = d1 * d2; - break; - case INST_DIV: - if (d2 == 0.0) { - TRACE(("%.6g %.6g => DIVIDE BY ZERO\n", d1, d2)); - goto divideByZero; - } - dResult = d1 / d2; - break; + case INST_ADD: + dResult = d1 + d2; + break; + case INST_SUB: + dResult = d1 - d2; + break; + case INST_MULT: + dResult = d1 * d2; + break; + case INST_DIV: +#ifndef IEEE_FLOATING_POINT + if (d2 == 0.0) { + TRACE(("%.6g %.6g => DIVIDE BY ZERO\n", d1, d2)); + goto divideByZero; + } +#endif + /* + * We presume that we are running with zero-divide unmasked if + * we're on an IEEE box. Otherwise, this statement might cause + * demons to fly out our noses. + */ + + dResult = d1 / d2; + break; + case INST_EXPON: + if (d1==0.0 && d2<0.0) { + TRACE(("%.6g %.6g => EXPONENT OF ZERO\n", d1, d2)); + goto exponOfZero; + } + dResult = pow(d1, d2); + break; + default: + /* Unused, here to silence compiler warning. */ + dResult = 0; } - + +#ifndef ACCEPT_NAN /* * Check now for IEEE floating-point error. */ - - if (IS_NAN(dResult) || IS_INF(dResult)) { + + if (TclIsNaN(dResult)) { TRACE(("%.20s %.20s => IEEE FLOATING PT ERROR\n", - O2S(valuePtr), O2S(value2Ptr))); + O2S(valuePtr), O2S(value2Ptr))); DECACHE_STACK_INFO(); TclExprFloatError(interp, dResult); CACHE_STACK_INFO(); result = TCL_ERROR; goto checkForCatch; } - } else if ((t1Ptr == &tclWideIntType) - || (t2Ptr == &tclWideIntType)) { - /* - * Do wide integer arithmetic. - */ - doWide = 1; - if (t1Ptr == &tclIntType) { - w = Tcl_LongAsWide(i); - } else if (t2Ptr == &tclIntType) { - w2 = Tcl_LongAsWide(i2); +#endif + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + TclNewDoubleObj(objResultPtr, dResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - switch (*pc) { - case INST_ADD: - wResult = w + w2; - break; - case INST_SUB: - wResult = w - w2; - break; - case INST_MULT: - wResult = w * w2; - break; - case INST_DIV: + TclSetDoubleObj(valuePtr, dResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + + if ((sizeof(long) >= 2*sizeof(int)) && (*pc == INST_MULT) + && (type1 == TCL_NUMBER_LONG) && (type2 == TCL_NUMBER_LONG)) { + long l1 = *((const long *)ptr1); + long l2 = *((const long *)ptr2); + + if ((l1 <= INT_MAX) && (l1 >= INT_MIN) + && (l2 <= INT_MAX) && (l2 >= INT_MIN)) { + long lResult = l1 * l2; + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr,lResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + TclSetLongObj(valuePtr, lResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + } + + if ((sizeof(Tcl_WideInt) >= 2*sizeof(long)) && (*pc == INST_MULT) + && (type1 == TCL_NUMBER_LONG) && (type2 == TCL_NUMBER_LONG)) { + Tcl_WideInt w1, w2, wResult; + TclGetWideIntFromObj(NULL, valuePtr, &w1); + TclGetWideIntFromObj(NULL, value2Ptr, &w2); + + wResult = w1 * w2; + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewWideIntObj(wResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetWideIntObj(valuePtr, wResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + + /* TODO: Attempts to re-use unshared operands on stack. */ + if (*pc == INST_EXPON) { + long l1 = 0, l2 = 0; + int oddExponent = 0, negativeExponent = 0; +#if (LONG_MAX > 0x7fffffff) || !defined(TCL_WIDE_INT_IS_LONG) + Tcl_WideInt w1; +#endif + + if (type2 == TCL_NUMBER_LONG) { + l2 = *((const long *) ptr2); + if (l2 == 0) { /* - * This code is tricky: C doesn't guarantee much - * about the quotient or remainder, but Tcl does. - * The remainder always has the same sign as the - * divisor and a smaller absolute value. + * Anything to the zero power is 1. */ - if (w2 == W0) { - TRACE((LLD" "LLD" => DIVIDE BY ZERO\n", w, w2)); - goto divideByZero; - } - if (w2 < 0) { - w2 = -w2; - w = -w; + + objResultPtr = constants[1]; + NEXT_INST_F(1, 2, 1); + } else if (l2 == 1) { + /* + * Anything to the first power is itself + */ + NEXT_INST_F(1, 1, 0); + } + } + + switch (type2) { + case TCL_NUMBER_LONG: { + negativeExponent = (l2 < 0); + oddExponent = (int) (l2 & 1); + break; + } +#ifndef NO_WIDE_TYPE + case TCL_NUMBER_WIDE: { + Tcl_WideInt w2 = *((const Tcl_WideInt *)ptr2); + + negativeExponent = (w2 < 0); + oddExponent = (int) (w2 & (Tcl_WideInt)1); + break; + } +#endif + case TCL_NUMBER_BIG: { + mp_int big2; + + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + negativeExponent = (mp_cmp_d(&big2, 0) == MP_LT); + mp_mod_2d(&big2, 1, &big2); + oddExponent = !mp_iszero(&big2); + mp_clear(&big2); + break; + } + } + + if (type1 == TCL_NUMBER_LONG) { + l1 = *((const long *)ptr1); + } + if (negativeExponent) { + if (type1 == TCL_NUMBER_LONG) { + switch (l1) { + case 0: + /* + * Zero to a negative power is div by zero error. + */ + + TRACE(("%s %s => EXPONENT OF ZERO\n", O2S(valuePtr), + O2S(value2Ptr))); + goto exponOfZero; + case -1: + if (oddExponent) { + TclNewIntObj(objResultPtr, -1); + } else { + objResultPtr = constants[1]; + } + NEXT_INST_F(1, 2, 1); + case 1: + /* + * 1 to any power is 1. + */ + + objResultPtr = constants[1]; + NEXT_INST_F(1, 2, 1); } - wquot = w / w2; - wrem = w % w2; - if (wrem < W0) { - wquot -= 1; + } + + /* + * Integers with magnitude greater than 1 raise to a negative + * power yield the answer zero (see TIP 123). + */ + + objResultPtr = constants[0]; + NEXT_INST_F(1, 2, 1); + } + + if (type1 == TCL_NUMBER_LONG) { + switch (l1) { + case 0: + /* + * Zero to a positive power is zero. + */ + + objResultPtr = constants[0]; + NEXT_INST_F(1, 2, 1); + case 1: + /* + * 1 to any power is 1. + */ + + objResultPtr = constants[1]; + NEXT_INST_F(1, 2, 1); + case -1: + if (oddExponent) { + TclNewIntObj(objResultPtr, -1); + } else { + objResultPtr = constants[1]; } - wResult = wquot; - break; + NEXT_INST_F(1, 2, 1); + } } - } else { /* - * Do integer arithmetic. + * We refuse to accept exponent arguments that exceed + * one mp_digit which means the max exponent value is + * 2**28-1 = 0x0fffffff = 268435455, which fits into + * a signed 32 bit int which is within the range of the + * long int type. This means any numeric Tcl_Obj value + * not using TCL_NUMBER_LONG type must hold a value larger + * than we accept. + */ + if (type2 != TCL_NUMBER_LONG) { + Tcl_SetObjResult(interp, + Tcl_NewStringObj("exponent too large", -1)); + result = TCL_ERROR; + goto checkForCatch; + } + + if (type1 == TCL_NUMBER_LONG) { + if (l1 == 2) { + /* + * Reduce small powers of 2 to shifts. */ - switch (*pc) { - case INST_ADD: - iResult = i + i2; - break; - case INST_SUB: - iResult = i - i2; - break; - case INST_MULT: - iResult = i * i2; - break; - case INST_DIV: + + if ((unsigned long) l2 < CHAR_BIT * sizeof(long) - 1) { + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + TclNewLongObj(objResultPtr, (1L << l2)); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } +#if !defined(TCL_WIDE_INT_IS_LONG) + if ((unsigned long)l2 < CHAR_BIT*sizeof(Tcl_WideInt) - 1){ + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = + Tcl_NewWideIntObj(((Tcl_WideInt) 1) << l2); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } +#endif + goto overflow; + } + if (l1 == -2) { + int signum = oddExponent ? -1 : 1; + /* - * This code is tricky: C doesn't guarantee much - * about the quotient or remainder, but Tcl does. - * The remainder always has the same sign as the - * divisor and a smaller absolute value. + * Reduce small powers of 2 to shifts. */ - if (i2 == 0) { - TRACE(("%ld %ld => DIVIDE BY ZERO\n", i, i2)); - goto divideByZero; + + if ((unsigned long) l2 < CHAR_BIT * sizeof(long) - 1) { + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + TclNewLongObj(objResultPtr, signum * (1L << l2)); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - if (i2 < 0) { - i2 = -i2; - i = -i; +#if !defined(TCL_WIDE_INT_IS_LONG) + if ((unsigned long)l2 < CHAR_BIT*sizeof(Tcl_WideInt) - 1){ + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = Tcl_NewWideIntObj( + signum * (((Tcl_WideInt) 1) << l2)); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - quot = i / i2; - rem = i % i2; - if (rem < 0) { - quot -= 1; +#endif + goto overflow; + } +#if (LONG_MAX == 0x7fffffff) + if (l2 - 2 < (long)MaxBase32Size + && l1 <= MaxBase32[l2 - 2] + && l1 >= -MaxBase32[l2 - 2]) { + /* + * Small powers of 32-bit integers. + */ + + long lResult = l1 * l1; /* b**2 */ + switch (l2) { + case 2: + break; + case 3: + lResult *= l1; /* b**3 */ + break; + case 4: + lResult *= lResult; /* b**4 */ + break; + case 5: + lResult *= lResult; /* b**4 */ + lResult *= l1; /* b**5 */ + break; + case 6: + lResult *= l1; /* b**3 */ + lResult *= lResult; /* b**6 */ + break; + case 7: + lResult *= l1; /* b**3 */ + lResult *= lResult; /* b**6 */ + lResult *= l1; /* b**7 */ + break; + case 8: + lResult *= lResult; /* b**4 */ + lResult *= lResult; /* b**8 */ + break; } - iResult = quot; - break; - } - } + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr, lResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetLongObj(valuePtr, lResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + if (l1 - 3 >= 0 && l1 - 2 < (long)Exp32IndexSize + && l2 - 2 < (long)(Exp32ValueSize + MaxBase32Size)) { - /* - * Reuse the valuePtr object already on stack if possible. - */ - - if (Tcl_IsShared(valuePtr)) { - if (doDouble) { - objResultPtr = Tcl_NewDoubleObj(dResult); - TRACE(("%.6g %.6g => %.6g\n", d1, d2, dResult)); - } else if (doWide) { - objResultPtr = Tcl_NewWideIntObj(wResult); - TRACE((LLD" "LLD" => "LLD"\n", w, w2, wResult)); - } else { - objResultPtr = Tcl_NewLongObj(iResult); - TRACE(("%ld %ld => %ld\n", i, i2, iResult)); - } - NEXT_INST_F(1, 2, 1); - } else { /* reuse the valuePtr object */ - if (doDouble) { /* NB: stack top is off by 1 */ - TRACE(("%.6g %.6g => %.6g\n", d1, d2, dResult)); - Tcl_SetDoubleObj(valuePtr, dResult); - } else if (doWide) { - TRACE((LLD" "LLD" => "LLD"\n", w, w2, wResult)); - Tcl_SetWideIntObj(valuePtr, wResult); - } else { - TRACE(("%ld %ld => %ld\n", i, i2, iResult)); - Tcl_SetLongObj(valuePtr, iResult); - } - NEXT_INST_F(1, 1, 0); - } - } + unsigned short base = Exp32Index[l1 - 3] + + (unsigned short) (l2 - 2 - MaxBase32Size); + if (base < Exp32Index[l1 - 2]) { + /* + * 32-bit number raised to intermediate power, done by + * table lookup. + */ - case INST_UPLUS: - { - /* - * Operand must be numeric. - */ + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr, Exp32Value[base]); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetLongObj(valuePtr, Exp32Value[base]); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + } + if (-l1 - 3 >= 0 && -l1 - 2 < (long)Exp32IndexSize + && l2 - 2 < (long)(Exp32ValueSize + MaxBase32Size)) { + unsigned short base = Exp32Index[-l1 - 3] + + (unsigned short) (l2 - 2 - MaxBase32Size); + if (base < Exp32Index[-l1 - 2]) { + long lResult = (oddExponent) ? + -Exp32Value[base] : Exp32Value[base]; - double d; - Tcl_ObjType *tPtr; - - valuePtr = stackPtr[stackTop]; - tPtr = valuePtr->typePtr; - if (!IS_INTEGER_TYPE(tPtr) && ((tPtr != &tclDoubleType) - || (valuePtr->bytes != NULL))) { - char *s = Tcl_GetStringFromObj(valuePtr, &length); - if (TclLooksLikeInt(s, length)) { - GET_WIDE_OR_INT(result, valuePtr, i, w); - } else { - result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, valuePtr, &d); + /* + * 32-bit number raised to intermediate power, done by + * table lookup. + */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr, lResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetLongObj(valuePtr, lResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + } +#endif } - if (result != TCL_OK) { - TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", - s, (tPtr? tPtr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, valuePtr); - CACHE_STACK_INFO(); - goto checkForCatch; +#if (LONG_MAX > 0x7fffffff) || !defined(TCL_WIDE_INT_IS_LONG) + if (type1 == TCL_NUMBER_LONG) { + w1 = l1; +#ifndef NO_WIDE_TYPE + } else if (type1 == TCL_NUMBER_WIDE) { + w1 = *((const Tcl_WideInt*) ptr1); +#endif + } else { + goto overflow; } - tPtr = valuePtr->typePtr; - } + if (l2 - 2 < (long)MaxBase64Size + && w1 <= MaxBase64[l2 - 2] + && w1 >= -MaxBase64[l2 - 2]) { + /* + * Small powers of integers whose result is wide. + */ - /* - * Ensure that the operand's string rep is the same as the - * formatted version of its internal rep. This makes sure - * that "expr +000123" yields "83", not "000123". We - * implement this by _discarding_ the string rep since we - * know it will be regenerated, if needed later, by - * formatting the internal rep's value. - */ + Tcl_WideInt wResult = w1 * w1; /* b**2 */ - if (Tcl_IsShared(valuePtr)) { - if (tPtr == &tclIntType) { - i = valuePtr->internalRep.longValue; - objResultPtr = Tcl_NewLongObj(i); - } else if (tPtr == &tclWideIntType) { - TclGetWide(w,valuePtr); - objResultPtr = Tcl_NewWideIntObj(w); - } else { - d = valuePtr->internalRep.doubleValue; - objResultPtr = Tcl_NewDoubleObj(d); + switch (l2) { + case 2: + break; + case 3: + wResult *= l1; /* b**3 */ + break; + case 4: + wResult *= wResult; /* b**4 */ + break; + case 5: + wResult *= wResult; /* b**4 */ + wResult *= w1; /* b**5 */ + break; + case 6: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + break; + case 7: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= w1; /* b**7 */ + break; + case 8: + wResult *= wResult; /* b**4 */ + wResult *= wResult; /* b**8 */ + break; + case 9: + wResult *= wResult; /* b**4 */ + wResult *= wResult; /* b**8 */ + wResult *= w1; /* b**9 */ + break; + case 10: + wResult *= wResult; /* b**4 */ + wResult *= w1; /* b**5 */ + wResult *= wResult; /* b**10 */ + break; + case 11: + wResult *= wResult; /* b**4 */ + wResult *= w1; /* b**5 */ + wResult *= wResult; /* b**10 */ + wResult *= w1; /* b**11 */ + break; + case 12: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= wResult; /* b**12 */ + break; + case 13: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= wResult; /* b**12 */ + wResult *= w1; /* b**13 */ + break; + case 14: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= w1; /* b**7 */ + wResult *= wResult; /* b**14 */ + break; + case 15: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= w1; /* b**7 */ + wResult *= wResult; /* b**14 */ + wResult *= w1; /* b**15 */ + break; + case 16: + wResult *= wResult; /* b**4 */ + wResult *= wResult; /* b**8 */ + wResult *= wResult; /* b**16 */ + break; + + } + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = Tcl_NewWideIntObj(wResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); } - TRACE_WITH_OBJ(("%s => ", O2S(objResultPtr)), objResultPtr); - NEXT_INST_F(1, 1, 1); - } else { - Tcl_InvalidateStringRep(valuePtr); - TRACE_WITH_OBJ(("%s => ", O2S(valuePtr)), valuePtr); - NEXT_INST_F(1, 0, 0); - } - } - - case INST_UMINUS: - case INST_LNOT: - { - /* - * The operand must be numeric or a boolean string as - * accepted by Tcl_GetBooleanFromObj(). If the operand - * object is unshared modify it directly, otherwise - * create a copy to modify: this is "copy on write". - * Free any old string representation since it is now - * invalid. - */ - double d; - int boolvar; - Tcl_ObjType *tPtr; + /* + * Handle cases of powers > 16 that still fit in a 64-bit word by + * doing table lookup. + */ + if (w1 - 3 >= 0 && w1 - 2 < (long)Exp64IndexSize + && l2 - 2 < (long)(Exp64ValueSize + MaxBase64Size)) { + unsigned short base = Exp64Index[w1 - 3] + + (unsigned short) (l2 - 2 - MaxBase64Size); - valuePtr = stackPtr[stackTop]; - tPtr = valuePtr->typePtr; - if (!IS_INTEGER_TYPE(tPtr) && ((tPtr != &tclDoubleType) - || (valuePtr->bytes != NULL))) { - if ((tPtr == &tclBooleanType) && (valuePtr->bytes == NULL)) { - valuePtr->typePtr = &tclIntType; - } else { - char *s = Tcl_GetStringFromObj(valuePtr, &length); - if (TclLooksLikeInt(s, length)) { - GET_WIDE_OR_INT(result, valuePtr, i, w); - } else { - result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, - valuePtr, &d); - } - if (result == TCL_ERROR && *pc == INST_LNOT) { - result = Tcl_GetBooleanFromObj((Tcl_Interp *)NULL, - valuePtr, &boolvar); - i = (long)boolvar; /* i is long, not int! */ + if (base < Exp64Index[w1 - 2]) { + /* + * 64-bit number raised to intermediate power, done by + * table lookup. + */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewWideIntObj(Exp64Value[base]); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetWideIntObj(valuePtr, Exp64Value[base]); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } - if (result != TCL_OK) { - TRACE(("\"%.20s\" => ILLEGAL TYPE %s\n", - s, (tPtr? tPtr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, valuePtr); - CACHE_STACK_INFO(); - goto checkForCatch; + } + + if (-w1 - 3 >= 0 && -w1 - 2 < (long)Exp64IndexSize + && l2 - 2 < (long)(Exp64ValueSize + MaxBase64Size)) { + unsigned short base = Exp64Index[-w1 - 3] + + (unsigned short) (l2 - 2 - MaxBase64Size); + + if (base < Exp64Index[-w1 - 2]) { + Tcl_WideInt wResult = (oddExponent) ? + -Exp64Value[base] : Exp64Value[base]; + /* + * 64-bit number raised to intermediate power, done by + * table lookup. + */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewWideIntObj(wResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetWideIntObj(valuePtr, wResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } } - tPtr = valuePtr->typePtr; +#endif + + goto overflow; } - if (Tcl_IsShared(valuePtr)) { - /* - * Create a new object. - */ - if ((tPtr == &tclIntType) || (tPtr == &tclBooleanType)) { - i = valuePtr->internalRep.longValue; - objResultPtr = Tcl_NewLongObj( - (*pc == INST_UMINUS)? -i : !i); - TRACE_WITH_OBJ(("%ld => ", i), objResultPtr); - } else if (tPtr == &tclWideIntType) { - TclGetWide(w,valuePtr); - if (*pc == INST_UMINUS) { - objResultPtr = Tcl_NewWideIntObj(-w); - } else { - objResultPtr = Tcl_NewLongObj(w == W0); + if ((*pc != INST_MULT) + && (type1 != TCL_NUMBER_BIG) && (type2 != TCL_NUMBER_BIG)) { + Tcl_WideInt w1, w2, wResult; + + TclGetWideIntFromObj(NULL, valuePtr, &w1); + TclGetWideIntFromObj(NULL, value2Ptr, &w2); + + switch (*pc) { + case INST_ADD: + wResult = w1 + w2; +#ifndef NO_WIDE_TYPE + if ((type1 == TCL_NUMBER_WIDE) || (type2 == TCL_NUMBER_WIDE)) +#endif + { + /* + * Check for overflow. + */ + + if (Overflowing(w1, w2, wResult)) { + goto overflow; + } } - TRACE_WITH_OBJ((LLD" => ", w), objResultPtr); - } else { - d = valuePtr->internalRep.doubleValue; - if (*pc == INST_UMINUS) { - objResultPtr = Tcl_NewDoubleObj(-d); - } else { + break; + + case INST_SUB: + wResult = w1 - w2; +#ifndef NO_WIDE_TYPE + if ((type1 == TCL_NUMBER_WIDE) || (type2 == TCL_NUMBER_WIDE)) +#endif + { /* - * Should be able to use "!d", but apparently - * some compilers can't handle it. + * Must check for overflow. The macro tests for overflows + * in sums by looking at the sign bits. As we have a + * subtraction here, we are adding -w2. As -w2 could in + * turn overflow, we test with ~w2 instead: it has the + * opposite sign bit to w2 so it does the job. Note that + * the only "bad" case (w2==0) is irrelevant for this + * macro, as in that case w1 and wResult have the same + * sign and there is no overflow anyway. */ - objResultPtr = Tcl_NewLongObj((d==0.0)? 1 : 0); + + if (Overflowing(w1, ~w2, wResult)) { + goto overflow; + } + } + break; + + case INST_DIV: + if (w2 == 0) { + TRACE(("%s %s => DIVIDE BY ZERO\n", + O2S(valuePtr), O2S(value2Ptr))); + goto divideByZero; } - TRACE_WITH_OBJ(("%.6g => ", d), objResultPtr); + + /* + * Need a bignum to represent (LLONG_MIN / -1) + */ + + if ((w1 == LLONG_MIN) && (w2 == -1)) { + goto overflow; + } + wResult = w1 / w2; + + /* + * Force Tcl's integer division rules. + * TODO: examine for logic simplification + */ + + if (((wResult < 0) || ((wResult == 0) && + ((w1 < 0 && w2 > 0) || (w1 > 0 && w2 < 0)))) && + ((wResult * w2) != w1)) { + wResult -= 1; + } + break; + default: + /* + * Unused, here to silence compiler warning. + */ + + wResult = 0; } - NEXT_INST_F(1, 1, 1); - } else { - /* - * valuePtr is unshared. Modify it directly. - */ - if ((tPtr == &tclIntType) || (tPtr == &tclBooleanType)) { - i = valuePtr->internalRep.longValue; - Tcl_SetLongObj(valuePtr, - (*pc == INST_UMINUS)? -i : !i); - TRACE_WITH_OBJ(("%ld => ", i), valuePtr); - } else if (tPtr == &tclWideIntType) { - TclGetWide(w,valuePtr); - if (*pc == INST_UMINUS) { - Tcl_SetWideIntObj(valuePtr, -w); - } else { - Tcl_SetLongObj(valuePtr, w == W0); + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewWideIntObj(wResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetWideIntObj(valuePtr, wResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + + overflow: + { + mp_int big1, big2, bigResult, bigRemainder; + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + mp_init(&bigResult); + switch (*pc) { + case INST_ADD: + mp_add(&big1, &big2, &bigResult); + break; + case INST_SUB: + mp_sub(&big1, &big2, &bigResult); + break; + case INST_MULT: + mp_mul(&big1, &big2, &bigResult); + break; + case INST_DIV: + if (mp_iszero(&big2)) { + TRACE(("%s %s => DIVIDE BY ZERO\n", O2S(valuePtr), + O2S(value2Ptr))); + mp_clear(&big1); + mp_clear(&big2); + mp_clear(&bigResult); + goto divideByZero; } - TRACE_WITH_OBJ((LLD" => ", w), valuePtr); - } else { - d = valuePtr->internalRep.doubleValue; - if (*pc == INST_UMINUS) { - Tcl_SetDoubleObj(valuePtr, -d); - } else { + mp_init(&bigRemainder); + mp_div(&big1, &big2, &bigResult, &bigRemainder); + /* TODO: internals intrusion */ + if (!mp_iszero(&bigRemainder) + && (bigRemainder.sign != big2.sign)) { /* - * Should be able to use "!d", but apparently - * some compilers can't handle it. + * Convert to Tcl's integer division rules. */ - Tcl_SetLongObj(valuePtr, (d==0.0)? 1 : 0); + + mp_sub_d(&bigResult, 1, &bigResult); + mp_add(&bigRemainder, &big2, &bigRemainder); } - TRACE_WITH_OBJ(("%.6g => ", d), valuePtr); + mp_clear(&bigRemainder); + break; + case INST_EXPON: + if (big2.used > 1) { + Tcl_SetObjResult(interp, + Tcl_NewStringObj("exponent too large", -1)); + mp_clear(&big1); + mp_clear(&big2); + mp_clear(&bigResult); + result = TCL_ERROR; + goto checkForCatch; + } + mp_expt_d(&big1, big2.dp[0], &bigResult); + break; } - NEXT_INST_F(1, 0, 0); + mp_clear(&big1); + mp_clear(&big2); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewBignumObj(&bigResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetBignumObj(valuePtr, &bigResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); } } - case INST_BITNOT: - { - /* - * The operand must be an integer. If the operand object is - * unshared modify it directly, otherwise modify a copy. - * Free any old string representation since it is now - * invalid. - */ - - Tcl_ObjType *tPtr; - - valuePtr = stackPtr[stackTop]; - tPtr = valuePtr->typePtr; - if (!IS_INTEGER_TYPE(tPtr)) { - REQUIRE_WIDE_OR_INT(result, valuePtr, i, w); - if (result != TCL_OK) { /* try to convert to double */ - TRACE(("\"%.20s\" => ILLEGAL TYPE %s\n", - O2S(valuePtr), (tPtr? tPtr->name : "null"))); - DECACHE_STACK_INFO(); - IllegalExprOperandType(interp, pc, valuePtr); - CACHE_STACK_INFO(); - goto checkForCatch; - } + case INST_LNOT: { + int b; + Tcl_Obj *valuePtr = OBJ_AT_TOS; + + /* TODO - check claim that taking address of b harms performance */ + /* TODO - consider optimization search for constants */ + result = TclGetBooleanFromObj(NULL, valuePtr, &b); + if (result != TCL_OK) { + TRACE(("\"%.20s\" => ILLEGAL TYPE %s\n", O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto checkForCatch; } - - if (valuePtr->typePtr == &tclWideIntType) { - TclGetWide(w,valuePtr); + /* TODO: Consider peephole opt. */ + objResultPtr = constants[!b]; + NEXT_INST_F(1, 1, 1); + } + + case INST_BITNOT: { + mp_int big; + ClientData ptr; + int type; + Tcl_Obj *valuePtr = OBJ_AT_TOS; + + result = GetNumberFromObj(NULL, valuePtr, &ptr, &type); + if ((result != TCL_OK) + || (type == TCL_NUMBER_NAN) || (type == TCL_NUMBER_DOUBLE)) { + /* + * ... ~$NonInteger => raise an error. + */ + + result = TCL_ERROR; + TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto checkForCatch; + } + if (type == TCL_NUMBER_LONG) { + long l = *((const long *)ptr); + if (Tcl_IsShared(valuePtr)) { - objResultPtr = Tcl_NewWideIntObj(~w); - TRACE(("0x%" TCL_LL_MODIFIER "x => (%" TCL_LL_MODIFIER "u)\n", - w, ~w)); + TclNewLongObj(objResultPtr, ~l); NEXT_INST_F(1, 1, 1); - } else { - /* - * valuePtr is unshared. Modify it directly. - */ - Tcl_SetWideIntObj(valuePtr, ~w); - TRACE(("0x%" TCL_LL_MODIFIER "x => (%" TCL_LL_MODIFIER "u)\n", - w, ~w)); - NEXT_INST_F(1, 0, 0); } - } else { - i = valuePtr->internalRep.longValue; + TclSetLongObj(valuePtr, ~l); + NEXT_INST_F(1, 0, 0); + } +#ifndef NO_WIDE_TYPE + if (type == TCL_NUMBER_WIDE) { + Tcl_WideInt w = *((const Tcl_WideInt *)ptr); + if (Tcl_IsShared(valuePtr)) { - objResultPtr = Tcl_NewLongObj(~i); - TRACE(("0x%lx => (%lu)\n", i, ~i)); + objResultPtr = Tcl_NewWideIntObj(~w); NEXT_INST_F(1, 1, 1); - } else { - /* - * valuePtr is unshared. Modify it directly. - */ - Tcl_SetLongObj(valuePtr, ~i); - TRACE(("0x%lx => (%lu)\n", i, ~i)); - NEXT_INST_F(1, 0, 0); } + Tcl_SetWideIntObj(valuePtr, ~w); + NEXT_INST_F(1, 0, 0); } +#endif + Tcl_TakeBignumFromObj(NULL, valuePtr, &big); + /* ~a = - a - 1 */ + mp_neg(&big, &big); + mp_sub_d(&big, 1, &big); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewBignumObj(&big); + NEXT_INST_F(1, 1, 1); + } + Tcl_SetBignumObj(valuePtr, &big); + NEXT_INST_F(1, 0, 0); } - case INST_CALL_BUILTIN_FUNC1: - opnd = TclGetUInt1AtPtr(pc+1); - { - /* - * Call one of the built-in Tcl math functions. - */ + case INST_UMINUS: { + ClientData ptr; + int type; + Tcl_Obj *valuePtr = OBJ_AT_TOS; - BuiltinFunc *mathFuncPtr; - - if ((opnd < 0) || (opnd > LAST_BUILTIN_FUNC)) { - TRACE(("UNRECOGNIZED BUILTIN FUNC CODE %d\n", opnd)); - panic("TclExecuteByteCode: unrecognized builtin function code %d", opnd); - } - mathFuncPtr = &(tclBuiltinFuncTable[opnd]); + result = GetNumberFromObj(NULL, valuePtr, &ptr, &type); + if ((result != TCL_OK) +#ifndef ACCEPT_NAN + || (type == TCL_NUMBER_NAN) +#endif + ) { + result = TCL_ERROR; + TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name : "null"))); DECACHE_STACK_INFO(); - result = (*mathFuncPtr->proc)(interp, eePtr, - mathFuncPtr->clientData); + IllegalExprOperandType(interp, pc, valuePtr); CACHE_STACK_INFO(); - if (result != TCL_OK) { - goto checkForCatch; + goto checkForCatch; + } + switch (type) { + case TCL_NUMBER_DOUBLE: { + double d; + + if (Tcl_IsShared(valuePtr)) { + TclNewDoubleObj(objResultPtr, -(*((const double *)ptr))); + NEXT_INST_F(1, 1, 1); } - TRACE_WITH_OBJ(("%d => ", opnd), stackPtr[stackTop]); + d = *((const double *)ptr); + TclSetDoubleObj(valuePtr, -d); + NEXT_INST_F(1, 0, 0); } - NEXT_INST_F(2, 0, 0); - - case INST_CALL_FUNC1: - opnd = TclGetUInt1AtPtr(pc+1); - { - /* - * Call a non-builtin Tcl math function previously - * registered by a call to Tcl_CreateMathFunc. - */ - - int objc = opnd; /* Number of arguments. The function name - * is the 0-th argument. */ - Tcl_Obj **objv; /* The array of arguments. The function - * name is objv[0]. */ + case TCL_NUMBER_LONG: { + long l = *((const long *)ptr); - objv = &(stackPtr[stackTop - (objc-1)]); /* "objv[0]" */ - DECACHE_STACK_INFO(); - result = ExprCallMathFunc(interp, eePtr, objc, objv); - CACHE_STACK_INFO(); - if (result != TCL_OK) { - goto checkForCatch; + if (l != LONG_MIN) { + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr, -l); + NEXT_INST_F(1, 1, 1); + } + TclSetLongObj(valuePtr, -l); + NEXT_INST_F(1, 0, 0); } - TRACE_WITH_OBJ(("%d => ", objc), stackPtr[stackTop]); + /* FALLTHROUGH */ } - NEXT_INST_F(2, 0, 0); +#ifndef NO_WIDE_TYPE + case TCL_NUMBER_WIDE: { + Tcl_WideInt w; - case INST_TRY_CVT_TO_NUMERIC: - { - /* - * Try to convert the topmost stack object to an int or - * double object. This is done in order to support Tcl's - * policy of interpreting operands if at all possible as - * first integers, else floating-point numbers. - */ - - double d; - char *s; - Tcl_ObjType *tPtr; - int converted, needNew; - - valuePtr = stackPtr[stackTop]; - tPtr = valuePtr->typePtr; - converted = 0; - if (!IS_INTEGER_TYPE(tPtr) && ((tPtr != &tclDoubleType) - || (valuePtr->bytes != NULL))) { - if ((tPtr == &tclBooleanType) && (valuePtr->bytes == NULL)) { - valuePtr->typePtr = &tclIntType; - converted = 1; + if (type == TCL_NUMBER_LONG) { + w = (Tcl_WideInt)(*((const long *)ptr)); } else { - s = Tcl_GetStringFromObj(valuePtr, &length); - if (TclLooksLikeInt(s, length)) { - GET_WIDE_OR_INT(result, valuePtr, i, w); - } else { - result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, - valuePtr, &d); - } - if (result == TCL_OK) { - converted = 1; + w = *((const Tcl_WideInt *)ptr); + } + if (w != LLONG_MIN) { + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewWideIntObj(-w); + NEXT_INST_F(1, 1, 1); } - result = TCL_OK; /* reset the result variable */ + Tcl_SetWideIntObj(valuePtr, -w); + NEXT_INST_F(1, 0, 0); + } + /* FALLTHROUGH */ + } +#endif + case TCL_NUMBER_BIG: { + mp_int big; + + switch (type) { +#ifdef NO_WIDE_TYPE + case TCL_NUMBER_LONG: + TclBNInitBignumFromLong(&big, *(const long *) ptr); + break; +#else + case TCL_NUMBER_WIDE: + TclBNInitBignumFromWideInt(&big, *(const Tcl_WideInt *) ptr); + break; +#endif + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, valuePtr, &big); } - tPtr = valuePtr->typePtr; + mp_neg(&big, &big); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewBignumObj(&big); + NEXT_INST_F(1, 1, 1); + } + Tcl_SetBignumObj(valuePtr, &big); + NEXT_INST_F(1, 0, 0); } + case TCL_NUMBER_NAN: + /* -NaN => NaN */ + NEXT_INST_F(1, 0, 0); + } + } + case INST_UPLUS: + case INST_TRY_CVT_TO_NUMERIC: { /* - * Ensure that the topmost stack object, if numeric, has a - * string rep the same as the formatted version of its - * internal rep. This is used, e.g., to make sure that "expr - * {0001}" yields "1", not "0001". We implement this by - * _discarding_ the string rep since we know it will be - * regenerated, if needed later, by formatting the internal - * rep's value. Also check if there has been an IEEE - * floating point error. + * Try to convert the topmost stack object to numeric object. This is + * done in order to support [expr]'s policy of interpreting operands + * if at all possible as numbers first, then strings. */ - - objResultPtr = valuePtr; - needNew = 0; - if (IS_NUMERIC_TYPE(tPtr)) { - if (Tcl_IsShared(valuePtr)) { - if (valuePtr->bytes != NULL) { - /* - * We only need to make a copy of the object - * when it already had a string rep - */ - needNew = 1; - if (tPtr == &tclIntType) { - i = valuePtr->internalRep.longValue; - objResultPtr = Tcl_NewLongObj(i); - } else if (tPtr == &tclWideIntType) { - TclGetWide(w,valuePtr); - objResultPtr = Tcl_NewWideIntObj(w); - } else { - d = valuePtr->internalRep.doubleValue; - objResultPtr = Tcl_NewDoubleObj(d); - } - tPtr = objResultPtr->typePtr; - } + + ClientData ptr; + int type; + Tcl_Obj *valuePtr = OBJ_AT_TOS; + + if (GetNumberFromObj(NULL, valuePtr, &ptr, &type) != TCL_OK) { + if (*pc == INST_UPLUS) { + /* + * ... +$NonNumeric => raise an error. + */ + + result = TCL_ERROR; + TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name:"null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto checkForCatch; } else { - Tcl_InvalidateStringRep(valuePtr); + /* ... TryConvertToNumeric($NonNumeric) is acceptable */ + TRACE(("\"%.20s\" => not numeric\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); } - - if (tPtr == &tclDoubleType) { - d = objResultPtr->internalRep.doubleValue; - if (IS_NAN(d) || IS_INF(d)) { - TRACE(("\"%.20s\" => IEEE FLOATING PT ERROR\n", - O2S(objResultPtr))); - DECACHE_STACK_INFO(); - TclExprFloatError(interp, d); - CACHE_STACK_INFO(); - result = TCL_ERROR; - goto checkForCatch; - } + } +#ifndef ACCEPT_NAN + if (type == TCL_NUMBER_NAN) { + result = TCL_ERROR; + if (*pc == INST_UPLUS) { + /* + * ... +$NonNumeric => raise an error. + */ + + TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name:"null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + } else { + /* + * Numeric conversion of NaN -> error. + */ + + TRACE(("\"%.20s\" => IEEE FLOATING PT ERROR\n", + O2S(objResultPtr))); + DECACHE_STACK_INFO(); + TclExprFloatError(interp, *((const double *)ptr)); + CACHE_STACK_INFO(); } - converted = converted; /* lint, converted not used. */ - TRACE(("\"%.20s\" => numeric, %s, %s\n", O2S(valuePtr), - (converted? "converted" : "not converted"), - (needNew? "new Tcl_Obj" : "same Tcl_Obj"))); - } else { - TRACE(("\"%.20s\" => not numeric\n", O2S(valuePtr))); + goto checkForCatch; } - if (needNew) { - NEXT_INST_F(1, 1, 1); - } else { +#endif + + /* + * Ensure that the numeric value has a string rep the same as the + * formatted version of its internal rep. This is used, e.g., to make + * sure that "expr {0001}" yields "1", not "0001". We implement this + * by _discarding_ the string rep since we know it will be + * regenerated, if needed later, by formatting the internal rep's + * value. + */ + + if (valuePtr->bytes == NULL) { + TRACE(("\"%.20s\" => numeric, same Tcl_Obj\n", O2S(valuePtr))); NEXT_INST_F(1, 0, 0); } + if (Tcl_IsShared(valuePtr)) { + /* + * Here we do some surgery within the Tcl_Obj internals. We want + * to copy the intrep, but not the string, so we temporarily hide + * the string so we do not copy it. + */ + + char *savedString = valuePtr->bytes; + + valuePtr->bytes = NULL; + objResultPtr = Tcl_DuplicateObj(valuePtr); + valuePtr->bytes = savedString; + TRACE(("\"%.20s\" => numeric, new Tcl_Obj\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 1); + } + TclInvalidateStringRep(valuePtr); + TRACE(("\"%.20s\" => numeric, same Tcl_Obj\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); } - + case INST_BREAK: + /* DECACHE_STACK_INFO(); Tcl_ResetResult(interp); CACHE_STACK_INFO(); + */ result = TCL_BREAK; cleanup = 0; goto processExceptionReturn; case INST_CONTINUE: + /* DECACHE_STACK_INFO(); Tcl_ResetResult(interp); CACHE_STACK_INFO(); + */ result = TCL_CONTINUE; cleanup = 0; goto processExceptionReturn; - case INST_FOREACH_START4: - opnd = TclGetUInt4AtPtr(pc+1); - { - /* - * Initialize the temporary local var that holds the count - * of the number of iterations of the loop body to -1. - */ + case INST_FOREACH_START4: { + /* + * Initialize the temporary local var that holds the count of the + * number of iterations of the loop body to -1. + */ - ForeachInfo *infoPtr = (ForeachInfo *) - codePtr->auxDataArrayPtr[opnd].clientData; - int iterTmpIndex = infoPtr->loopCtTemp; - Var *compiledLocals = iPtr->varFramePtr->compiledLocals; - Var *iterVarPtr = &(compiledLocals[iterTmpIndex]); - Tcl_Obj *oldValuePtr = iterVarPtr->value.objPtr; + int opnd, iterTmpIndex; + ForeachInfo *infoPtr; + Var *iterVarPtr; + Tcl_Obj *oldValuePtr; - if (oldValuePtr == NULL) { - iterVarPtr->value.objPtr = Tcl_NewLongObj(-1); - Tcl_IncrRefCount(iterVarPtr->value.objPtr); - } else { - Tcl_SetLongObj(oldValuePtr, -1); - } - TclSetVarScalar(iterVarPtr); - TclClearVarUndefined(iterVarPtr); - TRACE(("%u => loop iter count temp %d\n", - opnd, iterTmpIndex)); + opnd = TclGetUInt4AtPtr(pc+1); + infoPtr = (ForeachInfo *) codePtr->auxDataArrayPtr[opnd].clientData; + iterTmpIndex = infoPtr->loopCtTemp; + iterVarPtr = &(compiledLocals[iterTmpIndex]); + oldValuePtr = iterVarPtr->value.objPtr; + + if (oldValuePtr == NULL) { + TclNewLongObj(iterVarPtr->value.objPtr, -1); + Tcl_IncrRefCount(iterVarPtr->value.objPtr); + } else { + TclSetLongObj(oldValuePtr, -1); } - + TRACE(("%u => loop iter count temp %d\n", opnd, iterTmpIndex)); + #ifndef TCL_COMPILE_DEBUG - /* - * Remark that the compiler ALWAYS sets INST_FOREACH_STEP4 - * immediately after INST_FOREACH_START4 - let us just fall - * through instead of jumping back to the top. + /* + * Remark that the compiler ALWAYS sets INST_FOREACH_STEP4 immediately + * after INST_FOREACH_START4 - let us just fall through instead of + * jumping back to the top. */ pc += 5; TCL_DTRACE_INST_NEXT(); #else NEXT_INST_F(5, 0, 0); -#endif - case INST_FOREACH_STEP4: +#endif + } + + case INST_FOREACH_STEP4: { + /* + * "Step" a foreach loop (i.e., begin its next iteration) by assigning + * the next value list element to each loop var. + */ + + ForeachInfo *infoPtr; + ForeachVarList *varListPtr; + Tcl_Obj *listPtr,*valuePtr, *value2Ptr, **elements; + Var *iterVarPtr, *listVarPtr, *varPtr; + int opnd, numLists, iterNum, listTmpIndex, listLen, numVars; + int varIndex, valIndex, continueLoop, j; + long i; + opnd = TclGetUInt4AtPtr(pc+1); - { - /* - * "Step" a foreach loop (i.e., begin its next iteration) by - * assigning the next value list element to each loop var. - */ + infoPtr = (ForeachInfo *) codePtr->auxDataArrayPtr[opnd].clientData; + numLists = infoPtr->numLists; - ForeachInfo *infoPtr = (ForeachInfo *) - codePtr->auxDataArrayPtr[opnd].clientData; - ForeachVarList *varListPtr; - int numLists = infoPtr->numLists; - Var *compiledLocals = iPtr->varFramePtr->compiledLocals; - Tcl_Obj *listPtr; - Var *iterVarPtr, *listVarPtr; - int iterNum, listTmpIndex, listLen, numVars; - int varIndex, valIndex, continueLoop, j; + /* + * Increment the temp holding the loop iteration number. + */ - /* - * Increment the temp holding the loop iteration number. - */ + iterVarPtr = &(compiledLocals[infoPtr->loopCtTemp]); + valuePtr = iterVarPtr->value.objPtr; + iterNum = (valuePtr->internalRep.longValue + 1); + TclSetLongObj(valuePtr, iterNum); - iterVarPtr = &(compiledLocals[infoPtr->loopCtTemp]); - valuePtr = iterVarPtr->value.objPtr; - iterNum = (valuePtr->internalRep.longValue + 1); - Tcl_SetLongObj(valuePtr, iterNum); - - /* - * Check whether all value lists are exhausted and we should - * stop the loop. - */ + /* + * Check whether all value lists are exhausted and we should stop the + * loop. + */ - continueLoop = 0; - listTmpIndex = infoPtr->firstValueTemp; - for (i = 0; i < numLists; i++) { - varListPtr = infoPtr->varLists[i]; - numVars = varListPtr->numVars; - - listVarPtr = &(compiledLocals[listTmpIndex]); - listPtr = listVarPtr->value.objPtr; - result = Tcl_ListObjLength(interp, listPtr, &listLen); - if (result != TCL_OK) { - TRACE_WITH_OBJ(("%u => ERROR converting list %ld, \"%s\": ", - opnd, i, O2S(listPtr)), Tcl_GetObjResult(interp)); - goto checkForCatch; - } + continueLoop = 0; + listTmpIndex = infoPtr->firstValueTemp; + for (i = 0; i < numLists; i++) { + varListPtr = infoPtr->varLists[i]; + numVars = varListPtr->numVars; + + listVarPtr = &(compiledLocals[listTmpIndex]); + listPtr = listVarPtr->value.objPtr; + result = TclListObjLength(interp, listPtr, &listLen); + if (result == TCL_OK) { if (listLen > (iterNum * numVars)) { continueLoop = 1; } listTmpIndex++; + } else { + TRACE_WITH_OBJ(("%u => ERROR converting list %ld, \"%s\": ", + opnd, i, O2S(listPtr)), Tcl_GetObjResult(interp)); + goto checkForCatch; } + } - /* - * If some var in some var list still has a remaining list - * element iterate one more time. Assign to var the next - * element from its value list. We already checked above - * that each list temp holds a valid list object. - */ - - if (continueLoop) { - listTmpIndex = infoPtr->firstValueTemp; - for (i = 0; i < numLists; i++) { - varListPtr = infoPtr->varLists[i]; - numVars = varListPtr->numVars; + /* + * If some var in some var list still has a remaining list element + * iterate one more time. Assign to var the next element from its + * value list. We already checked above that each list temp holds a + * valid list object (by calling Tcl_ListObjLength), but cannot rely + * on that check remaining valid: one list could have been shimmered + * as a side effect of setting a traced variable. + */ - listVarPtr = &(compiledLocals[listTmpIndex]); - listPtr = listVarPtr->value.objPtr; + if (continueLoop) { + listTmpIndex = infoPtr->firstValueTemp; + for (i = 0; i < numLists; i++) { + varListPtr = infoPtr->varLists[i]; + numVars = varListPtr->numVars; - valIndex = (iterNum * numVars); - for (j = 0; j < numVars; j++) { - Tcl_Obj **elements; + listVarPtr = &(compiledLocals[listTmpIndex]); + listPtr = TclListObjCopy(NULL, listVarPtr->value.objPtr); + TclListObjGetElements(interp, listPtr, &listLen, &elements); - /* - * The call to TclPtrSetVar might shimmer listPtr, - * so re-fetch pointers every iteration for safety. - * See test foreach-10.1. - */ + valIndex = (iterNum * numVars); + for (j = 0; j < numVars; j++) { + if (valIndex >= listLen) { + TclNewObj(valuePtr); + } else { + valuePtr = elements[valIndex]; + } - Tcl_ListObjGetElements(NULL, listPtr, - &listLen, &elements); - if (valIndex >= listLen) { - TclNewObj(valuePtr); - } else { - valuePtr = elements[valIndex]; - } - - varIndex = varListPtr->varIndexes[j]; - varPtr = &(varFramePtr->compiledLocals[varIndex]); - part1 = varPtr->name; - while (TclIsVarLink(varPtr)) { - varPtr = varPtr->value.linkPtr; - } - if (!((varPtr->flags & VAR_IN_HASHTABLE) && (varPtr->hPtr == NULL)) - && (varPtr->tracePtr == NULL) - && (TclIsVarScalar(varPtr) || TclIsVarUndefined(varPtr))) { - value2Ptr = varPtr->value.objPtr; - if (valuePtr != value2Ptr) { - if (value2Ptr != NULL) { - TclDecrRefCount(value2Ptr); - } else { - TclSetVarScalar(varPtr); - TclClearVarUndefined(varPtr); - } - varPtr->value.objPtr = valuePtr; - Tcl_IncrRefCount(valuePtr); + varIndex = varListPtr->varIndexes[j]; + varPtr = &(compiledLocals[varIndex]); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + if (TclIsVarDirectWritable(varPtr)) { + value2Ptr = varPtr->value.objPtr; + if (valuePtr != value2Ptr) { + if (value2Ptr != NULL) { + TclDecrRefCount(value2Ptr); } - } else { - DECACHE_STACK_INFO(); + varPtr->value.objPtr = valuePtr; Tcl_IncrRefCount(valuePtr); - value2Ptr = TclPtrSetVar(interp, varPtr, NULL, part1, - NULL, valuePtr, TCL_LEAVE_ERR_MSG); - TclDecrRefCount(valuePtr); - CACHE_STACK_INFO(); - if (value2Ptr == NULL) { - TRACE_WITH_OBJ(("%u => ERROR init. index temp %d: ", - opnd, varIndex), - Tcl_GetObjResult(interp)); - result = TCL_ERROR; - goto checkForCatch; - } } - valIndex++; + } else { + DECACHE_STACK_INFO(); + value2Ptr = TclPtrSetVar(interp, varPtr, NULL, NULL, + NULL, valuePtr, TCL_LEAVE_ERR_MSG, varIndex); + CACHE_STACK_INFO(); + if (value2Ptr == NULL) { + TRACE_WITH_OBJ(( + "%u => ERROR init. index temp %d: ", + opnd,varIndex), Tcl_GetObjResult(interp)); + result = TCL_ERROR; + TclDecrRefCount(listPtr); + goto checkForCatch; + } } - listTmpIndex++; + valIndex++; } + TclDecrRefCount(listPtr); + listTmpIndex++; } - TRACE(("%u => %d lists, iter %d, %s loop\n", opnd, numLists, - iterNum, (continueLoop? "continue" : "exit"))); + } + TRACE(("%u => %d lists, iter %d, %s loop\n", opnd, numLists, + iterNum, (continueLoop? "continue" : "exit"))); - /* - * Run-time peep-hole optimisation: the compiler ALWAYS follows - * INST_FOREACH_STEP4 with an INST_JUMP_FALSE. We just skip that - * instruction and jump direct from here. - */ + /* + * Run-time peep-hole optimisation: the compiler ALWAYS follows + * INST_FOREACH_STEP4 with an INST_JUMP_FALSE. We just skip that + * instruction and jump direct from here. + */ - pc += 5; - if (*pc == INST_JUMP_FALSE1) { - NEXT_INST_F((continueLoop? 2 : TclGetInt1AtPtr(pc+1)), 0, 0); - } else { - NEXT_INST_F((continueLoop? 5 : TclGetInt4AtPtr(pc+1)), 0, 0); - } + pc += 5; + if (*pc == INST_JUMP_FALSE1) { + NEXT_INST_F((continueLoop? 2 : TclGetInt1AtPtr(pc+1)), 0, 0); + } else { + NEXT_INST_F((continueLoop? 5 : TclGetInt4AtPtr(pc+1)), 0, 0); } + } case INST_BEGIN_CATCH4: /* - * Record start of the catch command with exception range index - * equal to the operand. Push the current stack depth onto the - * special catch stack. + * Record start of the catch command with exception range index equal + * to the operand. Push the current stack depth onto the special catch + * stack. */ - catchStackPtr[++catchTop] = stackTop; + + *(++catchTop) = CURR_DEPTH; TRACE(("%u => catchTop=%d, stackTop=%d\n", - TclGetUInt4AtPtr(pc+1), catchTop, stackTop)); + TclGetUInt4AtPtr(pc+1), (int) (catchTop - initCatchTop - 1), + (int) CURR_DEPTH)); NEXT_INST_F(5, 0, 0); case INST_END_CATCH: catchTop--; + DECACHE_STACK_INFO(); + Tcl_ResetResult(interp); + CACHE_STACK_INFO(); result = TCL_OK; - TRACE(("=> catchTop=%d\n", catchTop)); + TRACE(("=> catchTop=%d\n", (int) (catchTop - initCatchTop - 1))); NEXT_INST_F(1, 0, 0); - + case INST_PUSH_RESULT: objResultPtr = Tcl_GetObjResult(interp); - TRACE_WITH_OBJ(("=> "), Tcl_GetObjResult(interp)); + TRACE_WITH_OBJ(("=> "), objResultPtr); /* * See the comments at INST_INVOKE_STK */ { Tcl_Obj *newObjResultPtr; + TclNewObj(newObjResultPtr); Tcl_IncrRefCount(newObjResultPtr); iPtr->objResultPtr = newObjResultPtr; @@ -4313,205 +6761,784 @@ TclExecuteByteCode(interp, codePtr) NEXT_INST_F(1, 0, -1); case INST_PUSH_RETURN_CODE: - objResultPtr = Tcl_NewLongObj(result); + TclNewIntObj(objResultPtr, result); TRACE(("=> %u\n", result)); NEXT_INST_F(1, 0, 1); + case INST_PUSH_RETURN_OPTIONS: + objResultPtr = Tcl_GetReturnOptions(interp, result); + TRACE_WITH_OBJ(("=> "), objResultPtr); + NEXT_INST_F(1, 0, 1); + +/* TODO: normalize "valPtr" to "valuePtr" */ + { + int opnd, opnd2, allocateDict; + Tcl_Obj *dictPtr, *valPtr; + Var *varPtr; + + case INST_DICT_GET: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ", opnd)); + dictPtr = OBJ_AT_DEPTH(opnd); + if (opnd > 1) { + dictPtr = TclTraceDictPath(interp, dictPtr, opnd-1, + &OBJ_AT_DEPTH(opnd-1), DICT_PATH_READ); + if (dictPtr == NULL) { + TRACE_WITH_OBJ(( + "%u => ERROR tracing dictionary path into \"%s\": ", + opnd, O2S(OBJ_AT_DEPTH(opnd))), + Tcl_GetObjResult(interp)); + result = TCL_ERROR; + goto checkForCatch; + } + } + result = Tcl_DictObjGet(interp, dictPtr, OBJ_AT_TOS, &objResultPtr); + if ((result == TCL_OK) && objResultPtr) { + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(5, opnd+1, 1); + } + if (result != TCL_OK) { + TRACE_WITH_OBJ(( + "%u => ERROR reading leaf dictionary key \"%s\": ", + opnd, O2S(dictPtr)), Tcl_GetObjResult(interp)); + } else { + DECACHE_STACK_INFO(); + Tcl_ResetResult(interp); + Tcl_AppendResult(interp, "key \"", TclGetString(OBJ_AT_TOS), + "\" not known in dictionary", NULL); + CACHE_STACK_INFO(); + TRACE_WITH_OBJ(("%u => ERROR ", opnd), Tcl_GetObjResult(interp)); + result = TCL_ERROR; + } + goto checkForCatch; + + case INST_DICT_SET: + case INST_DICT_UNSET: + case INST_DICT_INCR_IMM: + opnd = TclGetUInt4AtPtr(pc+1); + opnd2 = TclGetUInt4AtPtr(pc+5); + + varPtr = &(compiledLocals[opnd2]); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u %u => ", opnd, opnd2)); + if (TclIsVarDirectReadable(varPtr)) { + dictPtr = varPtr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + dictPtr = TclPtrGetVar(interp, varPtr, NULL,NULL,NULL, 0, opnd2); + CACHE_STACK_INFO(); + } + if (dictPtr == NULL) { + TclNewObj(dictPtr); + allocateDict = 1; + } else { + allocateDict = Tcl_IsShared(dictPtr); + if (allocateDict) { + dictPtr = Tcl_DuplicateObj(dictPtr); + } + } + + switch (*pc) { + case INST_DICT_SET: + cleanup = opnd + 1; + result = Tcl_DictObjPutKeyList(interp, dictPtr, opnd, + &OBJ_AT_DEPTH(opnd), OBJ_AT_TOS); + break; + case INST_DICT_INCR_IMM: + cleanup = 1; + opnd = TclGetInt4AtPtr(pc+1); + result = Tcl_DictObjGet(interp, dictPtr, OBJ_AT_TOS, &valPtr); + if (result != TCL_OK) { + break; + } + if (valPtr == NULL) { + Tcl_DictObjPut(NULL, dictPtr, OBJ_AT_TOS,Tcl_NewIntObj(opnd)); + } else { + Tcl_Obj *incrPtr = Tcl_NewIntObj(opnd); + + Tcl_IncrRefCount(incrPtr); + if (Tcl_IsShared(valPtr)) { + valPtr = Tcl_DuplicateObj(valPtr); + Tcl_DictObjPut(NULL, dictPtr, OBJ_AT_TOS, valPtr); + } + result = TclIncrObj(interp, valPtr, incrPtr); + if (result == TCL_OK) { + TclInvalidateStringRep(dictPtr); + } + TclDecrRefCount(incrPtr); + } + break; + case INST_DICT_UNSET: + cleanup = opnd; + result = Tcl_DictObjRemoveKeyList(interp, dictPtr, opnd, + &OBJ_AT_DEPTH(opnd-1)); + break; + default: + cleanup = 0; /* stop compiler warning */ + Tcl_Panic("Should not happen!"); + } + + if (result != TCL_OK) { + if (allocateDict) { + TclDecrRefCount(dictPtr); + } + TRACE_WITH_OBJ(("%u %u => ERROR updating dictionary: ", + opnd, opnd2), Tcl_GetObjResult(interp)); + goto checkForCatch; + } + + if (TclIsVarDirectWritable(varPtr)) { + if (allocateDict) { + Tcl_Obj *oldValuePtr = varPtr->value.objPtr; + + Tcl_IncrRefCount(dictPtr); + if (oldValuePtr != NULL) { + TclDecrRefCount(oldValuePtr); + } + varPtr->value.objPtr = dictPtr; + } + objResultPtr = dictPtr; + } else { + Tcl_IncrRefCount(dictPtr); + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + dictPtr, TCL_LEAVE_ERR_MSG, opnd2); + CACHE_STACK_INFO(); + TclDecrRefCount(dictPtr); + if (objResultPtr == NULL) { + TRACE_APPEND(("ERROR: %.30s\n", + O2S(Tcl_GetObjResult(interp)))); + result = TCL_ERROR; + goto checkForCatch; + } + } +#ifndef TCL_COMPILE_DEBUG + if (*(pc+9) == INST_POP) { + NEXT_INST_V(10, cleanup, 0); + } +#endif + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(9, cleanup, 1); + + case INST_DICT_APPEND: + case INST_DICT_LAPPEND: + opnd = TclGetUInt4AtPtr(pc+1); + + varPtr = &(compiledLocals[opnd]); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u => ", opnd)); + if (TclIsVarDirectReadable(varPtr)) { + dictPtr = varPtr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + dictPtr = TclPtrGetVar(interp, varPtr, NULL, NULL, NULL, 0, opnd); + CACHE_STACK_INFO(); + } + if (dictPtr == NULL) { + TclNewObj(dictPtr); + allocateDict = 1; + } else { + allocateDict = Tcl_IsShared(dictPtr); + if (allocateDict) { + dictPtr = Tcl_DuplicateObj(dictPtr); + } + } + + result = Tcl_DictObjGet(interp, dictPtr, OBJ_UNDER_TOS, &valPtr); + if (result != TCL_OK) { + if (allocateDict) { + TclDecrRefCount(dictPtr); + } + goto checkForCatch; + } + + /* + * Note that a non-existent key results in a NULL valPtr, which is a + * case handled separately below. What we *can* say at this point is + * that the write-back will always succeed. + */ + + switch (*pc) { + case INST_DICT_APPEND: + if (valPtr == NULL) { + valPtr = OBJ_AT_TOS; + } else { + if (Tcl_IsShared(valPtr)) { + valPtr = Tcl_DuplicateObj(valPtr); + } + Tcl_AppendObjToObj(valPtr, OBJ_AT_TOS); + } + break; + case INST_DICT_LAPPEND: + /* + * More complex because list-append can fail. + */ + + if (valPtr == NULL) { + valPtr = Tcl_NewListObj(1, &OBJ_AT_TOS); + } else if (Tcl_IsShared(valPtr)) { + valPtr = Tcl_DuplicateObj(valPtr); + result = Tcl_ListObjAppendElement(interp, valPtr, OBJ_AT_TOS); + if (result != TCL_OK) { + TclDecrRefCount(valPtr); + if (allocateDict) { + TclDecrRefCount(dictPtr); + } + goto checkForCatch; + } + } else { + result = Tcl_ListObjAppendElement(interp, valPtr, OBJ_AT_TOS); + if (result != TCL_OK) { + if (allocateDict) { + TclDecrRefCount(dictPtr); + } + goto checkForCatch; + } + } + break; + default: + Tcl_Panic("Should not happen!"); + } + + Tcl_DictObjPut(NULL, dictPtr, OBJ_UNDER_TOS, valPtr); + + if (TclIsVarDirectWritable(varPtr)) { + if (allocateDict) { + Tcl_Obj *oldValuePtr = varPtr->value.objPtr; + + Tcl_IncrRefCount(dictPtr); + if (oldValuePtr != NULL) { + TclDecrRefCount(oldValuePtr); + } + varPtr->value.objPtr = dictPtr; + } + objResultPtr = dictPtr; + } else { + Tcl_IncrRefCount(dictPtr); + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + dictPtr, TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + TclDecrRefCount(dictPtr); + if (objResultPtr == NULL) { + TRACE_APPEND(("ERROR: %.30s\n", + O2S(Tcl_GetObjResult(interp)))); + result = TCL_ERROR; + goto checkForCatch; + } + } +#ifndef TCL_COMPILE_DEBUG + if (*(pc+5) == INST_POP) { + NEXT_INST_F(6, 2, 0); + } +#endif + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(5, 2, 1); + } + + { + int opnd, done; + Tcl_Obj *statePtr, *dictPtr, *keyPtr, *valuePtr, *emptyPtr; + Var *varPtr; + Tcl_DictSearch *searchPtr; + + case INST_DICT_FIRST: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ", opnd)); + dictPtr = POP_OBJECT(); + searchPtr = (Tcl_DictSearch *) ckalloc(sizeof(Tcl_DictSearch)); + result = Tcl_DictObjFirst(interp, dictPtr, searchPtr, &keyPtr, + &valuePtr, &done); + if (result != TCL_OK) { + ckfree((char *) searchPtr); + goto checkForCatch; + } + TclNewObj(statePtr); + statePtr->typePtr = &dictIteratorType; + statePtr->internalRep.twoPtrValue.ptr1 = (void *) searchPtr; + statePtr->internalRep.twoPtrValue.ptr2 = (void *) dictPtr; + varPtr = (compiledLocals + opnd); + if (varPtr->value.objPtr) { + if (varPtr->value.objPtr->typePtr != &dictIteratorType) { + TclDecrRefCount(varPtr->value.objPtr); + } else { + Tcl_Panic("mis-issued dictFirst!"); + } + } + varPtr->value.objPtr = statePtr; + Tcl_IncrRefCount(statePtr); + goto pushDictIteratorResult; + + case INST_DICT_NEXT: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ", opnd)); + statePtr = compiledLocals[opnd].value.objPtr; + if (statePtr == NULL || statePtr->typePtr != &dictIteratorType) { + Tcl_Panic("mis-issued dictNext!"); + } + searchPtr = (Tcl_DictSearch *) statePtr->internalRep.twoPtrValue.ptr1; + Tcl_DictObjNext(searchPtr, &keyPtr, &valuePtr, &done); + pushDictIteratorResult: + if (done) { + TclNewObj(emptyPtr); + PUSH_OBJECT(emptyPtr); + PUSH_OBJECT(emptyPtr); + } else { + PUSH_OBJECT(valuePtr); + PUSH_OBJECT(keyPtr); + } + TRACE_APPEND(("\"%.30s\" \"%.30s\" %d", + O2S(OBJ_UNDER_TOS), O2S(OBJ_AT_TOS), done)); + objResultPtr = constants[done]; + /* TODO: consider opt like INST_FOREACH_STEP4 */ + NEXT_INST_F(5, 0, 1); + + case INST_DICT_DONE: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ", opnd)); + statePtr = compiledLocals[opnd].value.objPtr; + if (statePtr == NULL) { + Tcl_Panic("mis-issued dictDone!"); + } + + if (statePtr->typePtr == &dictIteratorType) { + /* + * First kill the search, and then release the reference to the + * dictionary that we were holding. + */ + + searchPtr = (Tcl_DictSearch *) + statePtr->internalRep.twoPtrValue.ptr1; + Tcl_DictObjDone(searchPtr); + ckfree((char *) searchPtr); + + dictPtr = (Tcl_Obj *) statePtr->internalRep.twoPtrValue.ptr2; + TclDecrRefCount(dictPtr); + + /* + * Set the internal variable to an empty object to signify that we + * don't hold an iterator. + */ + + TclDecrRefCount(statePtr); + TclNewObj(emptyPtr); + compiledLocals[opnd].value.objPtr = emptyPtr; + Tcl_IncrRefCount(emptyPtr); + } + NEXT_INST_F(5, 0, 0); + } + + { + int opnd, opnd2, i, length, allocdict; + Tcl_Obj **keyPtrPtr, *dictPtr; + DictUpdateInfo *duiPtr; + Var *varPtr; + + case INST_DICT_UPDATE_START: + opnd = TclGetUInt4AtPtr(pc+1); + opnd2 = TclGetUInt4AtPtr(pc+5); + varPtr = &(compiledLocals[opnd]); + duiPtr = codePtr->auxDataArrayPtr[opnd2].clientData; + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u => ", opnd)); + if (TclIsVarDirectReadable(varPtr)) { + dictPtr = varPtr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + dictPtr = TclPtrGetVar(interp, varPtr, NULL, NULL, NULL, + TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + if (dictPtr == NULL) { + goto dictUpdateStartFailed; + } + } + if (TclListObjGetElements(interp, OBJ_AT_TOS, &length, + &keyPtrPtr) != TCL_OK) { + goto dictUpdateStartFailed; + } + if (length != duiPtr->length) { + Tcl_Panic("dictUpdateStart argument length mismatch"); + } + for (i=0 ; i<length ; i++) { + Tcl_Obj *valPtr; + + if (Tcl_DictObjGet(interp, dictPtr, keyPtrPtr[i], + &valPtr) != TCL_OK) { + goto dictUpdateStartFailed; + } + varPtr = &(compiledLocals[duiPtr->varIndices[i]]); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + DECACHE_STACK_INFO(); + if (valPtr == NULL) { + TclObjUnsetVar2(interp, + localName(iPtr->varFramePtr, duiPtr->varIndices[i]), + NULL, 0); + } else if (TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + valPtr, TCL_LEAVE_ERR_MSG, + duiPtr->varIndices[i]) == NULL) { + CACHE_STACK_INFO(); + dictUpdateStartFailed: + result = TCL_ERROR; + goto checkForCatch; + } + CACHE_STACK_INFO(); + } + NEXT_INST_F(9, 0, 0); + + case INST_DICT_UPDATE_END: + opnd = TclGetUInt4AtPtr(pc+1); + opnd2 = TclGetUInt4AtPtr(pc+5); + varPtr = &(compiledLocals[opnd]); + duiPtr = codePtr->auxDataArrayPtr[opnd2].clientData; + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u => ", opnd)); + if (TclIsVarDirectReadable(varPtr)) { + dictPtr = varPtr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + dictPtr = TclPtrGetVar(interp, varPtr, NULL, NULL, NULL, 0, opnd); + CACHE_STACK_INFO(); + } + if (dictPtr == NULL) { + NEXT_INST_F(9, 1, 0); + } + if (Tcl_DictObjSize(interp, dictPtr, &length) != TCL_OK + || TclListObjGetElements(interp, OBJ_AT_TOS, &length, + &keyPtrPtr) != TCL_OK) { + result = TCL_ERROR; + goto checkForCatch; + } + allocdict = Tcl_IsShared(dictPtr); + if (allocdict) { + dictPtr = Tcl_DuplicateObj(dictPtr); + } + for (i=0 ; i<length ; i++) { + Tcl_Obj *valPtr; + Var *var2Ptr; + + var2Ptr = &(compiledLocals[duiPtr->varIndices[i]]); + while (TclIsVarLink(var2Ptr)) { + var2Ptr = var2Ptr->value.linkPtr; + } + if (TclIsVarDirectReadable(var2Ptr)) { + valPtr = var2Ptr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + valPtr = TclPtrGetVar(interp, var2Ptr, NULL, NULL, NULL, 0, + duiPtr->varIndices[i]); + CACHE_STACK_INFO(); + } + if (valPtr == NULL) { + Tcl_DictObjRemove(interp, dictPtr, keyPtrPtr[i]); + } else if (dictPtr == valPtr) { + Tcl_DictObjPut(interp, dictPtr, keyPtrPtr[i], + Tcl_DuplicateObj(valPtr)); + } else { + Tcl_DictObjPut(interp, dictPtr, keyPtrPtr[i], valPtr); + } + } + if (TclIsVarDirectWritable(varPtr)) { + Tcl_IncrRefCount(dictPtr); + TclDecrRefCount(varPtr->value.objPtr); + varPtr->value.objPtr = dictPtr; + } else { + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + dictPtr, TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + if (objResultPtr == NULL) { + if (allocdict) { + TclDecrRefCount(dictPtr); + } + result = TCL_ERROR; + goto checkForCatch; + } + } + NEXT_INST_F(9, 1, 0); + } + default: - panic("TclExecuteByteCode: unrecognized opCode %u", *pc); + Tcl_Panic("TclExecuteByteCode: unrecognized opCode %u", *pc); } /* end of switch on opCode */ /* - * Division by zero in an expression. Control only reaches this - * point by "goto divideByZero". + * Division by zero in an expression. Control only reaches this point by + * "goto divideByZero". */ - + divideByZero: DECACHE_STACK_INFO(); - Tcl_ResetResult(interp); - Tcl_AppendToObj(Tcl_GetObjResult(interp), "divide by zero", -1); - Tcl_SetErrorCode(interp, "ARITH", "DIVZERO", "divide by zero", - (char *) NULL); + Tcl_SetObjResult(interp, Tcl_NewStringObj("divide by zero", -1)); + Tcl_SetErrorCode(interp, "ARITH", "DIVZERO", "divide by zero", NULL); CACHE_STACK_INFO(); result = TCL_ERROR; goto checkForCatch; - + /* - * An external evaluation (INST_INVOKE or INST_EVAL) returned - * something different from TCL_OK, or else INST_BREAK or - * INST_CONTINUE were called. + * Exponentiation of zero by negative number in an expression. Control + * only reaches this point by "goto exponOfZero". */ - processExceptionReturn: -#if TCL_COMPILE_DEBUG - switch (*pc) { - case INST_INVOKE_STK1: - case INST_INVOKE_STK4: + exponOfZero: + DECACHE_STACK_INFO(); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "exponentiation of zero by negative power", -1)); + Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", + "exponentiation of zero by negative power", NULL); + CACHE_STACK_INFO(); + result = TCL_ERROR; + goto checkForCatch; + + /* + * Block for variables needed to process exception returns. + */ + + { + ExceptionRange *rangePtr; + /* Points to closest loop or catch exception + * range enclosing the pc. Used by various + * instructions and processCatch to process + * break, continue, and errors. */ + Tcl_Obj *valuePtr; + const char *bytes; + int length; +#if TCL_COMPILE_DEBUG + int opnd; +#endif + + /* + * An external evaluation (INST_INVOKE or INST_EVAL) returned + * something different from TCL_OK, or else INST_BREAK or + * INST_CONTINUE were called. + */ + + processExceptionReturn: +#if TCL_COMPILE_DEBUG + switch (*pc) { + case INST_INVOKE_STK1: + opnd = TclGetUInt1AtPtr(pc+1); TRACE(("%u => ... after \"%.20s\": ", opnd, cmdNameBuf)); break; - case INST_EVAL_STK: + case INST_INVOKE_STK4: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ... after \"%.20s\": ", opnd, cmdNameBuf)); + break; + case INST_EVAL_STK: /* - * Note that the object at stacktop has to be used - * before doing the cleanup. + * Note that the object at stacktop has to be used before doing + * the cleanup. */ - TRACE(("\"%.30s\" => ", O2S(stackPtr[stackTop]))); + TRACE(("\"%.30s\" => ", O2S(OBJ_AT_TOS))); break; - default: + default: TRACE(("=> ")); - } -#endif - if ((result == TCL_CONTINUE) || (result == TCL_BREAK)) { - rangePtr = GetExceptRangeForPc(pc, /*catchOnly*/ 0, codePtr); - if (rangePtr == NULL) { - TRACE_APPEND(("no encl. loop or catch, returning %s\n", - StringForResultCode(result))); - goto abnormalReturn; - } - if (rangePtr->type == CATCH_EXCEPTION_RANGE) { - TRACE_APPEND(("%s ...\n", StringForResultCode(result))); - goto processCatch; } - while (cleanup--) { - valuePtr = POP_OBJECT(); - TclDecrRefCount(valuePtr); +#endif + if ((result == TCL_CONTINUE) || (result == TCL_BREAK)) { + rangePtr = GetExceptRangeForPc(pc, /*catchOnly*/ 0, codePtr); + if (rangePtr == NULL) { + TRACE_APPEND(("no encl. loop or catch, returning %s\n", + StringForResultCode(result))); + goto abnormalReturn; + } + if (rangePtr->type == CATCH_EXCEPTION_RANGE) { + TRACE_APPEND(("%s ...\n", StringForResultCode(result))); + goto processCatch; + } + while (cleanup--) { + valuePtr = POP_OBJECT(); + TclDecrRefCount(valuePtr); + } + if (result == TCL_BREAK) { + result = TCL_OK; + pc = (codePtr->codeStart + rangePtr->breakOffset); + TRACE_APPEND(("%s, range at %d, new pc %d\n", + StringForResultCode(result), + rangePtr->codeOffset, rangePtr->breakOffset)); + NEXT_INST_F(0, 0, 0); + } else { + if (rangePtr->continueOffset == -1) { + TRACE_APPEND(( + "%s, loop w/o continue, checking for catch\n", + StringForResultCode(result))); + goto checkForCatch; + } + result = TCL_OK; + pc = (codePtr->codeStart + rangePtr->continueOffset); + TRACE_APPEND(("%s, range at %d, new pc %d\n", + StringForResultCode(result), + rangePtr->codeOffset, rangePtr->continueOffset)); + NEXT_INST_F(0, 0, 0); + } +#if TCL_COMPILE_DEBUG + } else if (traceInstructions) { + if ((result != TCL_ERROR) && (result != TCL_RETURN)) { + Tcl_Obj *objPtr = Tcl_GetObjResult(interp); + TRACE_APPEND(("OTHER RETURN CODE %d, result= \"%s\"\n ", + result, O2S(objPtr))); + } else { + Tcl_Obj *objPtr = Tcl_GetObjResult(interp); + TRACE_APPEND(("%s, result= \"%s\"\n", + StringForResultCode(result), O2S(objPtr))); + } +#endif } - if (result == TCL_BREAK) { - result = TCL_OK; - pc = (codePtr->codeStart + rangePtr->breakOffset); - TRACE_APPEND(("%s, range at %d, new pc %d\n", - StringForResultCode(result), - rangePtr->codeOffset, rangePtr->breakOffset)); - NEXT_INST_F(0, 0, 0); - } else { - if (rangePtr->continueOffset == -1) { - TRACE_APPEND(("%s, loop w/o continue, checking for catch\n", - StringForResultCode(result))); - goto checkForCatch; - } - result = TCL_OK; - pc = (codePtr->codeStart + rangePtr->continueOffset); - TRACE_APPEND(("%s, range at %d, new pc %d\n", - StringForResultCode(result), - rangePtr->codeOffset, rangePtr->continueOffset)); - NEXT_INST_F(0, 0, 0); - } -#if TCL_COMPILE_DEBUG - } else if (traceInstructions) { - if ((result != TCL_ERROR) && (result != TCL_RETURN)) { - objPtr = Tcl_GetObjResult(interp); - TRACE_APPEND(("OTHER RETURN CODE %d, result= \"%s\"\n ", - result, O2S(objPtr))); - } else { - objPtr = Tcl_GetObjResult(interp); - TRACE_APPEND(("%s, result= \"%s\"\n", - StringForResultCode(result), O2S(objPtr))); + + /* + * Execution has generated an "exception" such as TCL_ERROR. If the + * exception is an error, record information about what was being + * executed when the error occurred. Find the closest enclosing catch + * range, if any. If no enclosing catch range is found, stop execution + * and return the "exception" code. + */ + + checkForCatch: + if ((result == TCL_ERROR) && !(iPtr->flags & ERR_ALREADY_LOGGED)) { + bytes = GetSrcInfoForPc(pc, codePtr, &length); + if (bytes != NULL) { + DECACHE_STACK_INFO(); + Tcl_LogCommandInfo(interp, codePtr->source, bytes, length); + CACHE_STACK_INFO(); + } + } + iPtr->flags &= ~ERR_ALREADY_LOGGED; + + /* + * Clear all expansions that may have started after the last + * INST_BEGIN_CATCH. + */ + + while ((expandNestList != NULL) && ((catchTop == initCatchTop) || + (*catchTop <= + (ptrdiff_t) expandNestList->internalRep.twoPtrValue.ptr1))) { + Tcl_Obj *objPtr = expandNestList->internalRep.twoPtrValue.ptr2; + + TclDecrRefCount(expandNestList); + expandNestList = objPtr; } + + /* + * We must not catch an exceeded limit. Instead, it blows outwards + * until we either hit another interpreter (presumably where the limit + * is not exceeded) or we get to the top-level. + */ + + if (TclLimitExceeded(iPtr->limit)) { +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + fprintf(stdout, " ... limit exceeded, returning %s\n", + StringForResultCode(result)); + } #endif - } - - /* - * Execution has generated an "exception" such as TCL_ERROR. If the - * exception is an error, record information about what was being - * executed when the error occurred. Find the closest enclosing - * catch range, if any. If no enclosing catch range is found, stop - * execution and return the "exception" code. - */ - - checkForCatch: - if ((result == TCL_ERROR) && !(iPtr->flags & ERR_ALREADY_LOGGED)) { - bytes = GetSrcInfoForPc(pc, codePtr, &length); - if (bytes != NULL) { - DECACHE_STACK_INFO(); - Tcl_LogCommandInfo(interp, codePtr->source, bytes, length); - CACHE_STACK_INFO(); - iPtr->flags |= ERR_ALREADY_LOGGED; + goto abnormalReturn; } - } - if (catchTop == -1) { + if (catchTop == initCatchTop) { #ifdef TCL_COMPILE_DEBUG - if (traceInstructions) { - fprintf(stdout, " ... no enclosing catch, returning %s\n", - StringForResultCode(result)); + if (traceInstructions) { + fprintf(stdout, " ... no enclosing catch, returning %s\n", + StringForResultCode(result)); + } +#endif + goto abnormalReturn; } + rangePtr = GetExceptRangeForPc(pc, /*catchOnly*/ 1, codePtr); + if (rangePtr == NULL) { + /* + * This is only possible when compiling a [catch] that sends its + * script to INST_EVAL. Cannot correct the compiler without + * breakingcompat with previous .tbc compiled scripts. + */ + +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + fprintf(stdout, " ... no enclosing catch, returning %s\n", + StringForResultCode(result)); + } #endif - goto abnormalReturn; - } - rangePtr = GetExceptRangeForPc(pc, /*catchOnly*/ 1, codePtr); - if (rangePtr == NULL) { + goto abnormalReturn; + } + /* - * This is only possible when compiling a [catch] that sends its - * script to INST_EVAL. Cannot correct the compiler without - * breakingcompat with previous .tbc compiled scripts. + * A catch exception range (rangePtr) was found to handle an + * "exception". It was found either by checkForCatch just above or by + * an instruction during break, continue, or error processing. Jump to + * its catchOffset after unwinding the operand stack to the depth it + * had when starting to execute the range's catch command. */ + + processCatch: + while (CURR_DEPTH > *catchTop) { + valuePtr = POP_OBJECT(); + TclDecrRefCount(valuePtr); + } #ifdef TCL_COMPILE_DEBUG if (traceInstructions) { - fprintf(stdout, " ... no enclosing catch, returning %s\n", - StringForResultCode(result)); + fprintf(stdout, " ... found catch at %d, catchTop=%d, " + "unwound to %ld, new pc %u\n", + rangePtr->codeOffset, (int) (catchTop - initCatchTop - 1), + (long) *catchTop, (unsigned) rangePtr->catchOffset); } #endif - goto abnormalReturn; - } + pc = (codePtr->codeStart + rangePtr->catchOffset); + NEXT_INST_F(0, 0, 0); /* Restart the execution loop at pc. */ - /* - * A catch exception range (rangePtr) was found to handle an - * "exception". It was found either by checkForCatch just above or - * by an instruction during break, continue, or error processing. - * Jump to its catchOffset after unwinding the operand stack to - * the depth it had when starting to execute the range's catch - * command. - */ + /* + * end of infinite loop dispatching on instructions. + */ - processCatch: - while (stackTop > catchStackPtr[catchTop]) { - valuePtr = POP_OBJECT(); - TclDecrRefCount(valuePtr); - } -#ifdef TCL_COMPILE_DEBUG - if (traceInstructions) { - fprintf(stdout, " ... found catch at %d, catchTop=%d, unwound to %d, new pc %u\n", - rangePtr->codeOffset, catchTop, catchStackPtr[catchTop], - (unsigned int)(rangePtr->catchOffset)); - } -#endif - pc = (codePtr->codeStart + rangePtr->catchOffset); - NEXT_INST_F(0, 0, 0); /* restart the execution loop at pc */ + /* + * Abnormal return code. Restore the stack to state it had when + * starting to execute the ByteCode. Panic if the stack is below the + * initial level. + */ - /* - * end of infinite loop dispatching on instructions. - */ + abnormalReturn: + TCL_DTRACE_INST_LAST(); + while (tosPtr > initTosPtr) { + Tcl_Obj *objPtr = POP_OBJECT(); - /* - * Abnormal return code. Restore the stack to state it had when starting - * to execute the ByteCode. Panic if the stack is below the initial level. - */ + Tcl_DecrRefCount(objPtr); + } - abnormalReturn: - TCL_DTRACE_INST_LAST(); - while (stackTop > initStackTop) { - valuePtr = POP_OBJECT(); - TclDecrRefCount(valuePtr); - } - if (stackTop < initStackTop) { - fprintf(stderr, "\nTclExecuteByteCode: abnormal return at pc %u: stack top %d < entry stack top %d\n", - (unsigned int)(pc - codePtr->codeStart), - (unsigned int) stackTop, - (unsigned int) initStackTop); - panic("TclExecuteByteCode execution failure: end stack top < start stack top"); + /* + * Clear all expansions. + */ + + while (expandNestList) { + Tcl_Obj *objPtr = expandNestList->internalRep.twoPtrValue.ptr2; + + TclDecrRefCount(expandNestList); + expandNestList = objPtr; + } + if (tosPtr < initTosPtr) { + fprintf(stderr, + "\nTclExecuteByteCode: abnormal return at pc %u: " + "stack top %d < entry stack top %d\n", + (unsigned)(pc - codePtr->codeStart), + (unsigned) CURR_DEPTH, (unsigned) 0); + Tcl_Panic("TclExecuteByteCode execution failure: end stack top < start stack top"); + } } - + /* - * Free the catch stack array if malloc'ed storage was used. + * Restore the stack to the state it had previous to this bytecode. */ - if (catchStackPtr != catchStackStorage) { - ckfree((char *) catchStackPtr); - } - eePtr->stackTop = initStackTop; - + TclStackFree(interp, initCatchTop+1); return result; -#undef STATIC_CATCH_STACK_SIZE +#undef iPtr } #ifdef TCL_COMPILE_DEBUG @@ -4520,9 +7547,9 @@ TclExecuteByteCode(interp, codePtr) * * PrintByteCodeInfo -- * - * This procedure prints a summary about a bytecode object to stdout. - * It is called by TclExecuteByteCode when starting to execute the - * bytecode object if tclTraceExec has the value 2 or more. + * This procedure prints a summary about a bytecode object to stdout. It + * is called by TclExecuteByteCode when starting to execute the bytecode + * object if tclTraceExec has the value 2 or more. * * Results: * None. @@ -4534,46 +7561,45 @@ TclExecuteByteCode(interp, codePtr) */ static void -PrintByteCodeInfo(codePtr) - register ByteCode *codePtr; /* The bytecode whose summary is printed - * to stdout. */ +PrintByteCodeInfo( + register ByteCode *codePtr) /* The bytecode whose summary is printed to + * stdout. */ { Proc *procPtr = codePtr->procPtr; Interp *iPtr = (Interp *) *codePtr->interpHandle; - fprintf(stdout, "\nExecuting ByteCode 0x%x, refCt %u, epoch %u, interp 0x%x (epoch %u)\n", - (unsigned int) codePtr, codePtr->refCount, - codePtr->compileEpoch, (unsigned int) iPtr, + fprintf(stdout, "\nExecuting ByteCode 0x%p, refCt %u, epoch %u, interp 0x%p (epoch %u)\n", + codePtr, codePtr->refCount, codePtr->compileEpoch, iPtr, iPtr->compileEpoch); - + fprintf(stdout, " Source: "); TclPrintSource(stdout, codePtr->source, 60); fprintf(stdout, "\n Cmds %d, src %d, inst %u, litObjs %u, aux %d, stkDepth %u, code/src %.2f\n", - codePtr->numCommands, codePtr->numSrcBytes, + codePtr->numCommands, codePtr->numSrcBytes, codePtr->numCodeBytes, codePtr->numLitObjects, codePtr->numAuxDataItems, codePtr->maxStackDepth, #ifdef TCL_COMPILE_STATS - (codePtr->numSrcBytes? - ((float)codePtr->structureSize)/((float)codePtr->numSrcBytes) : 0.0)); -#else - 0.0); + codePtr->numSrcBytes? + ((float)codePtr->structureSize)/codePtr->numSrcBytes : #endif + 0.0); + #ifdef TCL_COMPILE_STATS - fprintf(stdout, " Code %u = header %u+inst %d+litObj %lu+exc %lu+aux %lu+cmdMap %d\n", - (unsigned int)codePtr->structureSize, - (unsigned int)(sizeof(ByteCode) - (sizeof(size_t) + sizeof(Tcl_Time))), + fprintf(stdout, " Code %lu = header %lu+inst %d+litObj %lu+exc %lu+aux %lu+cmdMap %d\n", + (unsigned long) codePtr->structureSize, + (unsigned long) (sizeof(ByteCode)-sizeof(size_t)-sizeof(Tcl_Time)), codePtr->numCodeBytes, - (unsigned long)(codePtr->numLitObjects * sizeof(Tcl_Obj *)), - (unsigned long)(codePtr->numExceptRanges * sizeof(ExceptionRange)), - (unsigned long)(codePtr->numAuxDataItems * sizeof(AuxData)), + (unsigned long) (codePtr->numLitObjects * sizeof(Tcl_Obj *)), + (unsigned long) (codePtr->numExceptRanges*sizeof(ExceptionRange)), + (unsigned long) (codePtr->numAuxDataItems * sizeof(AuxData)), codePtr->numCmdLocBytes); #endif /* TCL_COMPILE_STATS */ if (procPtr != NULL) { fprintf(stdout, - " Proc 0x%x, refCt %d, args %d, compiled locals %d\n", - (unsigned int) procPtr, procPtr->refCount, - procPtr->numArgs, procPtr->numCompiledLocals); + " Proc 0x%p, refCt %d, args %d, compiled locals %d\n", + procPtr, procPtr->refCount, procPtr->numArgs, + procPtr->numCompiledLocals); } } #endif /* TCL_COMPILE_DEBUG */ @@ -4591,60 +7617,63 @@ PrintByteCodeInfo(codePtr) * None. * * Side effects: - * Prints a message to stderr and panics if either the pc or stack - * top are invalid. + * Prints a message to stderr and panics if either the pc or stack top + * are invalid. * *---------------------------------------------------------------------- */ #ifdef TCL_COMPILE_DEBUG static void -ValidatePcAndStackTop(codePtr, pc, stackTop, stackLowerBound) - register ByteCode *codePtr; /* The bytecode whose summary is printed - * to stdout. */ - unsigned char *pc; /* Points to first byte of a bytecode +ValidatePcAndStackTop( + register ByteCode *codePtr, /* The bytecode whose summary is printed to + * stdout. */ + unsigned char *pc, /* Points to first byte of a bytecode * instruction. The program counter. */ - int stackTop; /* Current stack top. Must be between + int stackTop, /* Current stack top. Must be between * stackLowerBound and stackUpperBound * (inclusive). */ - int stackLowerBound; /* Smallest legal value for stackTop. */ + int stackLowerBound, /* Smallest legal value for stackTop. */ + int checkStack) /* 0 if the stack depth check should be + * skipped. */ { - int stackUpperBound = stackLowerBound + codePtr->maxStackDepth; - /* Greatest legal value for stackTop. */ - unsigned int relativePc = (unsigned int) (pc - codePtr->codeStart); - unsigned int codeStart = (unsigned int) codePtr->codeStart; - unsigned int codeEnd = (unsigned int) + int stackUpperBound = stackLowerBound + codePtr->maxStackDepth; + /* Greatest legal value for stackTop. */ + unsigned relativePc = (unsigned) (pc - codePtr->codeStart); + unsigned long codeStart = (unsigned long) codePtr->codeStart; + unsigned long codeEnd = (unsigned long) (codePtr->codeStart + codePtr->numCodeBytes); unsigned char opCode = *pc; - if (((unsigned int) pc < codeStart) || ((unsigned int) pc > codeEnd)) { - fprintf(stderr, "\nBad instruction pc 0x%x in TclExecuteByteCode\n", - (unsigned int) pc); - panic("TclExecuteByteCode execution failure: bad pc"); + if (((unsigned long) pc < codeStart) || ((unsigned long) pc > codeEnd)) { + fprintf(stderr, "\nBad instruction pc 0x%p in TclExecuteByteCode\n", + pc); + Tcl_Panic("TclExecuteByteCode execution failure: bad pc"); } - if ((unsigned int) opCode > LAST_INST_OPCODE) { + if ((unsigned) opCode > LAST_INST_OPCODE) { fprintf(stderr, "\nBad opcode %d at pc %u in TclExecuteByteCode\n", - (unsigned int) opCode, relativePc); - panic("TclExecuteByteCode execution failure: bad opcode"); + (unsigned) opCode, relativePc); + Tcl_Panic("TclExecuteByteCode execution failure: bad opcode"); } - if ((stackTop < stackLowerBound) || (stackTop > stackUpperBound)) { + if (checkStack && + ((stackTop < stackLowerBound) || (stackTop > stackUpperBound))) { int numChars; - char *cmd = GetSrcInfoForPc(pc, codePtr, &numChars); - char *ellipsis = ""; - + const char *cmd = GetSrcInfoForPc(pc, codePtr, &numChars); + fprintf(stderr, "\nBad stack top %d at pc %u in TclExecuteByteCode (min %i, max %i)", stackTop, relativePc, stackLowerBound, stackUpperBound); if (cmd != NULL) { - if (numChars > 100) { - numChars = 100; - ellipsis = "..."; - } - fprintf(stderr, "\n executing %.*s%s\n", numChars, cmd, - ellipsis); + Tcl_Obj *message; + + TclNewLiteralStringObj(message, "\n executing "); + Tcl_IncrRefCount(message); + Tcl_AppendLimitedToObj(message, cmd, numChars, 100, NULL); + fprintf(stderr,"%s\n", Tcl_GetString(message)); + Tcl_DecrRefCount(message); } else { fprintf(stderr, "\n"); } - panic("TclExecuteByteCode execution failure: bad stack top"); + Tcl_Panic("TclExecuteByteCode execution failure: bad stack top"); } } #endif /* TCL_COMPILE_DEBUG */ @@ -4654,142 +7683,66 @@ ValidatePcAndStackTop(codePtr, pc, stackTop, stackLowerBound) * * IllegalExprOperandType -- * - * Used by TclExecuteByteCode to add an error message to errorInfo - * when an illegal operand type is detected by an expression + * Used by TclExecuteByteCode to append an error message to the interp + * result when an illegal operand type is detected by an expression * instruction. The argument opndPtr holds the operand object in error. * * Results: * None. * * Side effects: - * An error message is appended to errorInfo. + * An error message is appended to the interp result. * *---------------------------------------------------------------------- */ static void -IllegalExprOperandType(interp, pc, opndPtr) - Tcl_Interp *interp; /* Interpreter to which error information +IllegalExprOperandType( + Tcl_Interp *interp, /* Interpreter to which error information * pertains. */ - unsigned char *pc; /* Points to the instruction being executed + unsigned char *pc, /* Points to the instruction being executed * when the illegal type was found. */ - Tcl_Obj *opndPtr; /* Points to the operand holding the value + Tcl_Obj *opndPtr) /* Points to the operand holding the value * with the illegal type. */ { - unsigned char opCode = *pc; - - Tcl_ResetResult(interp); - if ((opndPtr->bytes == NULL) || (opndPtr->length == 0)) { - Tcl_AppendStringsToObj(Tcl_GetObjResult(interp), - "can't use empty string as operand of \"", - operatorStrings[opCode - INST_LOR], "\"", (char *) NULL); - } else { - char *msg = "non-numeric string"; - char *s, *p; - int length; - int looksLikeInt = 0; + ClientData ptr; + int type; + unsigned char opcode = *pc; + const char *description, *operator = operatorStrings[opcode - INST_LOR]; - s = Tcl_GetStringFromObj(opndPtr, &length); - p = s; - /* - * strtod() isn't at all consistent about detecting Inf and - * NaN between platforms. - */ - if (length == 3) { - if ((s[0]=='n' || s[0]=='N') && (s[1]=='a' || s[1]=='A') && - (s[2]=='n' || s[2]=='N')) { - msg = "non-numeric floating-point value"; - goto makeErrorMessage; - } - if ((s[0]=='i' || s[0]=='I') && (s[1]=='n' || s[1]=='N') && - (s[2]=='f' || s[2]=='F')) { - msg = "infinite floating-point value"; - goto makeErrorMessage; - } - } + if (opcode == INST_EXPON) { + operator = "**"; + } - /* - * We cannot use TclLooksLikeInt here because it passes strings - * like "10;" [Bug 587140]. We'll accept as "looking like ints" - * for the present purposes any string that looks formally like - * a (decimal|octal|hex) integer. - */ + if (GetNumberFromObj(NULL, opndPtr, &ptr, &type) != TCL_OK) { + int numBytes; + const char *bytes = Tcl_GetStringFromObj(opndPtr, &numBytes); - while (length && isspace(UCHAR(*p))) { - length--; - p++; - } - if (length && ((*p == '+') || (*p == '-'))) { - length--; - p++; - } - if (length) { - if ((*p == '0') && ((*(p+1) == 'x') || (*(p+1) == 'X'))) { - p += 2; - length -= 2; - looksLikeInt = ((length > 0) && isxdigit(UCHAR(*p))); - if (looksLikeInt) { - length--; - p++; - while (length && isxdigit(UCHAR(*p))) { - length--; - p++; - } - } - } else { - looksLikeInt = (length && isdigit(UCHAR(*p))); - if (looksLikeInt) { - length--; - p++; - while (length && isdigit(UCHAR(*p))) { - length--; - p++; - } - } - } - while (length && isspace(UCHAR(*p))) { - length--; - p++; - } - looksLikeInt = !length; - } - if (looksLikeInt) { - /* - * If something that looks like an integer could not be - * converted, then it *must* be a bad octal or too large - * to represent [Bug 542588]. - */ - - if (TclCheckBadOctal(NULL, s)) { - msg = "invalid octal number"; - } else { - msg = "integer value too large to represent"; - Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW", - "integer value too large to represent", (char *) NULL); - } + if (numBytes == 0) { + description = "empty string"; + } else if (TclCheckBadOctal(NULL, bytes)) { + description = "invalid octal number"; } else { - /* - * See if the operand can be interpreted as a double in - * order to improve the error message. - */ - - double d; - - if (Tcl_GetDouble((Tcl_Interp *) NULL, s, &d) == TCL_OK) { - msg = "floating-point value"; - } + description = "non-numeric string"; } - makeErrorMessage: - Tcl_AppendStringsToObj(Tcl_GetObjResult(interp), "can't use ", - msg, " as operand of \"", operatorStrings[opCode - INST_LOR], - "\"", (char *) NULL); + } else if (type == TCL_NUMBER_NAN) { + description = "non-numeric floating-point value"; + } else if (type == TCL_NUMBER_DOUBLE) { + description = "floating-point value"; + } else { + /* TODO: No caller needs this. Eliminate? */ + description = "(big) integer"; } + + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "can't use %s as operand of \"%s\"", description, operator)); + Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", description, NULL); } /* *---------------------------------------------------------------------- * - * TclGetSrcInfoForPc, GetSrcInfoForPc -- + * TclGetSrcInfoForPc, GetSrcInfoForPc, TclGetSrcInfoForCmd -- * * Given a program counter value, finds the closest command in the * bytecode code unit's CmdLocation array and returns information about @@ -4799,85 +7752,98 @@ IllegalExprOperandType(interp, pc, opndPtr) * Results: * If a command is found that encloses the program counter value, a * pointer to the command's source is returned and the length of the - * source is stored at *lengthPtr. If multiple commands resulted in - * code at pc, information about the closest enclosing command is - * returned. If no matching command is found, NULL is returned and - * *lengthPtr is unchanged. + * source is stored at *lengthPtr. If multiple commands resulted in code + * at pc, information about the closest enclosing command is returned. If + * no matching command is found, NULL is returned and *lengthPtr is + * unchanged. * * Side effects: - * None. + * The CmdFrame at *cfPtr is updated. * *---------------------------------------------------------------------- */ -#ifdef TCL_TIP280 +const char * +TclGetSrcInfoForCmd( + Interp *iPtr, + int *lenPtr) +{ + CmdFrame *cfPtr = iPtr->cmdFramePtr; + ByteCode *codePtr = (ByteCode *) cfPtr->data.tebc.codePtr; + + return GetSrcInfoForPc((unsigned char *) cfPtr->data.tebc.pc, + codePtr, lenPtr); +} + void -TclGetSrcInfoForPc (cfPtr) - CmdFrame* cfPtr; +TclGetSrcInfoForPc( + CmdFrame *cfPtr) { - ByteCode* codePtr = (ByteCode*) cfPtr->data.tebc.codePtr; + ByteCode *codePtr = (ByteCode *) cfPtr->data.tebc.codePtr; if (cfPtr->cmd.str.cmd == NULL) { - cfPtr->cmd.str.cmd = GetSrcInfoForPc((unsigned char*) cfPtr->data.tebc.pc, - codePtr, - &cfPtr->cmd.str.len); + cfPtr->cmd.str.cmd = GetSrcInfoForPc( + (unsigned char *) cfPtr->data.tebc.pc, codePtr, + &cfPtr->cmd.str.len); } if (cfPtr->cmd.str.cmd != NULL) { - /* We now have the command. We can get the srcOffset back and - * from there find the list of word locations for this command + /* + * We now have the command. We can get the srcOffset back and from + * there find the list of word locations for this command. */ - ExtCmdLoc* eclPtr; - ECL* locPtr = NULL; - int srcOffset; + ExtCmdLoc *eclPtr; + ECL *locPtr = NULL; + int srcOffset, i; + Interp *iPtr = (Interp *) *codePtr->interpHandle; + Tcl_HashEntry *hePtr = + Tcl_FindHashEntry(iPtr->lineBCPtr, (char *) codePtr); - Interp* iPtr = (Interp*) *codePtr->interpHandle; - Tcl_HashEntry* hePtr = Tcl_FindHashEntry (iPtr->lineBCPtr, (char *) codePtr); - - if (!hePtr) return; + if (!hePtr) { + return; + } srcOffset = cfPtr->cmd.str.cmd - codePtr->source; - eclPtr = (ExtCmdLoc*) Tcl_GetHashValue (hePtr); + eclPtr = (ExtCmdLoc *) Tcl_GetHashValue (hePtr); - { - int i; - for (i=0; i < eclPtr->nuloc; i++) { - if (eclPtr->loc [i].srcOffset == srcOffset) { - locPtr = &(eclPtr->loc [i]); - break; - } + for (i=0; i < eclPtr->nuloc; i++) { + if (eclPtr->loc[i].srcOffset == srcOffset) { + locPtr = eclPtr->loc+i; + break; } } + if (locPtr == NULL) { + Tcl_Panic("LocSearch failure"); + } - if (locPtr == NULL) {Tcl_Panic ("LocSearch failure");} - - cfPtr->line = locPtr->line; - cfPtr->nline = locPtr->nline; - cfPtr->type = eclPtr->type; + cfPtr->line = locPtr->line; + cfPtr->nline = locPtr->nline; + cfPtr->type = eclPtr->type; if (eclPtr->type == TCL_LOCATION_SOURCE) { cfPtr->data.eval.path = eclPtr->path; - Tcl_IncrRefCount (cfPtr->data.eval.path); + Tcl_IncrRefCount(cfPtr->data.eval.path); } - /* Do not set cfPtr->data.eval.path NULL for non-SOURCE - * Needed for cfPtr->data.tebc.codePtr. + + /* + * Do not set cfPtr->data.eval.path NULL for non-SOURCE. Needed for + * cfPtr->data.tebc.codePtr. */ } } -#endif -static char * -GetSrcInfoForPc(pc, codePtr, lengthPtr) - unsigned char *pc; /* The program counter value for which to +static const char * +GetSrcInfoForPc( + unsigned char *pc, /* The program counter value for which to * return the closest command's source info. - * This points to a bytecode instruction - * in codePtr's code. */ - ByteCode *codePtr; /* The bytecode sequence in which to look - * up the command source for the pc. */ - int *lengthPtr; /* If non-NULL, the location where the - * length of the command's source should be - * stored. If NULL, no length is stored. */ + * This points to a bytecode instruction in + * codePtr's code. */ + ByteCode *codePtr, /* The bytecode sequence in which to look up + * the command source for the pc. */ + int *lengthPtr) /* If non-NULL, the location where the length + * of the command's source should be stored. + * If NULL, no length is stored. */ { register int pcOffset = (pc - codePtr->codeStart); int numCmds = codePtr->numCommands; @@ -4900,11 +7866,11 @@ GetSrcInfoForPc(pc, codePtr, lengthPtr) codeDeltaNext = codePtr->codeDeltaStart; codeLengthNext = codePtr->codeLengthStart; - srcDeltaNext = codePtr->srcDeltaStart; + srcDeltaNext = codePtr->srcDeltaStart; srcLengthNext = codePtr->srcLengthStart; codeOffset = srcOffset = 0; for (i = 0; i < numCmds; i++) { - if ((unsigned int) (*codeDeltaNext) == (unsigned int) 0xFF) { + if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) { codeDeltaNext++; delta = TclGetInt4AtPtr(codeDeltaNext); codeDeltaNext += 4; @@ -4914,7 +7880,7 @@ GetSrcInfoForPc(pc, codePtr, lengthPtr) } codeOffset += delta; - if ((unsigned int) (*codeLengthNext) == (unsigned int) 0xFF) { + if ((unsigned) *codeLengthNext == (unsigned) 0xFF) { codeLengthNext++; codeLen = TclGetInt4AtPtr(codeLengthNext); codeLengthNext += 4; @@ -4924,7 +7890,7 @@ GetSrcInfoForPc(pc, codePtr, lengthPtr) } codeEnd = (codeOffset + codeLen - 1); - if ((unsigned int) (*srcDeltaNext) == (unsigned int) 0xFF) { + if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) { srcDeltaNext++; delta = TclGetInt4AtPtr(srcDeltaNext); srcDeltaNext += 4; @@ -4934,7 +7900,7 @@ GetSrcInfoForPc(pc, codePtr, lengthPtr) } srcOffset += delta; - if ((unsigned int) (*srcLengthNext) == (unsigned int) 0xFF) { + if ((unsigned) *srcLengthNext == (unsigned) 0xFF) { srcLengthNext++; srcLen = TclGetInt4AtPtr(srcLengthNext); srcLengthNext += 4; @@ -4942,11 +7908,13 @@ GetSrcInfoForPc(pc, codePtr, lengthPtr) srcLen = TclGetInt1AtPtr(srcLengthNext); srcLengthNext++; } - - if (codeOffset > pcOffset) { /* best cmd already found */ + + if (codeOffset > pcOffset) { /* Best cmd already found */ break; - } else if (pcOffset <= codeEnd) { /* this cmd's code encloses pc */ + } + if (pcOffset <= codeEnd) { /* This cmd's code encloses pc */ int dist = (pcOffset - codeOffset); + if (dist <= bestDist) { bestDist = dist; bestSrcOffset = srcOffset; @@ -4958,7 +7926,7 @@ GetSrcInfoForPc(pc, codePtr, lengthPtr) if (bestDist == INT_MAX) { return NULL; } - + if (lengthPtr != NULL) { *lengthPtr = bestSrcLength; } @@ -4974,15 +7942,14 @@ GetSrcInfoForPc(pc, codePtr, lengthPtr) * ExceptionRange. * * Results: - * In the normal case, catchOnly is 0 (false) and this procedure - * returns a pointer to the most closely enclosing ExceptionRange - * structure regardless of whether it is a loop or catch exception - * range. This is appropriate when processing a TCL_BREAK or - * TCL_CONTINUE, which will be "handled" either by a loop exception - * range or a closer catch range. If catchOnly is nonzero, this - * procedure ignores loop exception ranges and returns a pointer to the - * closest catch range. If no matching ExceptionRange is found that - * encloses pc, a NULL is returned. + * In the normal case, catchOnly is 0 (false) and this procedure returns + * a pointer to the most closely enclosing ExceptionRange structure + * regardless of whether it is a loop or catch exception range. This is + * appropriate when processing a TCL_BREAK or TCL_CONTINUE, which will be + * "handled" either by a loop exception range or a closer catch range. If + * catchOnly is nonzero, this procedure ignores loop exception ranges and + * returns a pointer to the closest catch range. If no matching + * ExceptionRange is found that encloses pc, a NULL is returned. * * Side effects: * None. @@ -4991,33 +7958,32 @@ GetSrcInfoForPc(pc, codePtr, lengthPtr) */ static ExceptionRange * -GetExceptRangeForPc(pc, catchOnly, codePtr) - unsigned char *pc; /* The program counter value for which to +GetExceptRangeForPc( + unsigned char *pc, /* The program counter value for which to * search for a closest enclosing exception * range. This points to a bytecode * instruction in codePtr's code. */ - int catchOnly; /* If 0, consider either loop or catch + int catchOnly, /* If 0, consider either loop or catch * ExceptionRanges in search. If nonzero - * consider only catch ranges (and ignore - * any closer loop ranges). */ - ByteCode* codePtr; /* Points to the ByteCode in which to search + * consider only catch ranges (and ignore any + * closer loop ranges). */ + ByteCode *codePtr) /* Points to the ByteCode in which to search * for the enclosing ExceptionRange. */ { ExceptionRange *rangeArrayPtr; int numRanges = codePtr->numExceptRanges; register ExceptionRange *rangePtr; - int pcOffset = (pc - codePtr->codeStart); + int pcOffset = pc - codePtr->codeStart; register int start; if (numRanges == 0) { return NULL; } - /* - * This exploits peculiarities of our compiler: nested ranges - * are always *after* their containing ranges, so that by scanning - * backwards we are sure that the first matching range is indeed - * the deepest. + /* + * This exploits peculiarities of our compiler: nested ranges are always + * *after* their containing ranges, so that by scanning backwards we are + * sure that the first matching range is indeed the deepest. */ rangeArrayPtr = codePtr->exceptArrayPtr; @@ -5025,7 +7991,7 @@ GetExceptRangeForPc(pc, catchOnly, codePtr) while (--rangePtr >= rangeArrayPtr) { start = rangePtr->codeOffset; if ((start <= pcOffset) && - (pcOffset < (start + rangePtr->numCodeBytes))) { + (pcOffset < (start + rangePtr->numCodeBytes))) { if ((!catchOnly) || (rangePtr->type == CATCH_EXCEPTION_RANGE)) { return rangePtr; @@ -5040,9 +8006,9 @@ GetExceptRangeForPc(pc, catchOnly, codePtr) * * GetOpcodeName -- * - * This procedure is called by the TRACE and TRACE_WITH_OBJ macros - * used in TclExecuteByteCode when debugging. It returns the name of - * the bytecode instruction at a specified instruction pc. + * This procedure is called by the TRACE and TRACE_WITH_OBJ macros used + * in TclExecuteByteCode when debugging. It returns the name of the + * bytecode instruction at a specified instruction pc. * * Results: * A character string for the instruction. @@ -5055,12 +8021,12 @@ GetExceptRangeForPc(pc, catchOnly, codePtr) #ifdef TCL_COMPILE_DEBUG static char * -GetOpcodeName(pc) - unsigned char *pc; /* Points to the instruction whose name - * should be returned. */ +GetOpcodeName( + unsigned char *pc) /* Points to the instruction whose name should + * be returned. */ { unsigned char opCode = *pc; - + return tclInstructionTable[opCode].name; } #endif /* TCL_COMPILE_DEBUG */ @@ -5068,991 +8034,10 @@ GetOpcodeName(pc) /* *---------------------------------------------------------------------- * - * VerifyExprObjType -- - * - * This procedure is called by the math functions to verify that - * the object is either an int or double, coercing it if necessary. - * If an error occurs during conversion, an error message is left - * in the interpreter's result unless "interp" is NULL. - * - * Results: - * TCL_OK if it was int or double, TCL_ERROR otherwise - * - * Side effects: - * objPtr is ensured to be of tclIntType, tclWideIntType or - * tclDoubleType. - * - *---------------------------------------------------------------------- - */ - -static int -VerifyExprObjType(interp, objPtr) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - Tcl_Obj *objPtr; /* Points to the object to type check. */ -{ - if (IS_NUMERIC_TYPE(objPtr->typePtr)) { - return TCL_OK; - } else { - int length, result = TCL_OK; - char *s = Tcl_GetStringFromObj(objPtr, &length); - - if (TclLooksLikeInt(s, length)) { - long i; - Tcl_WideInt w; - GET_WIDE_OR_INT(result, objPtr, i, w); - /* Quiet cranky old compilers that complain about - * setting i, but not using it. */ - (void)i; - } else { - double d; - result = Tcl_GetDoubleFromObj((Tcl_Interp *) NULL, objPtr, &d); - } - if ((result != TCL_OK) && (interp != NULL)) { - Tcl_ResetResult(interp); - if (TclCheckBadOctal((Tcl_Interp *) NULL, s)) { - Tcl_AppendToObj(Tcl_GetObjResult(interp), - "argument to math function was an invalid octal number", - -1); - } else { - Tcl_AppendToObj(Tcl_GetObjResult(interp), - "argument to math function didn't have numeric value", - -1); - } - } - return result; - } -} - -/* - *---------------------------------------------------------------------- - * - * Math Functions -- - * - * This page contains the procedures that implement all of the - * built-in math functions for expressions. - * - * Results: - * Each procedure returns TCL_OK if it succeeds and pushes an - * Tcl object holding the result. If it fails it returns TCL_ERROR - * and leaves an error message in the interpreter's result. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - -static int -ExprUnaryFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Contains the address of a procedure that - * takes one double argument and returns a - * double result. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - register Tcl_Obj *valuePtr; - double d, dResult; - int result; - - double (*func) _ANSI_ARGS_((double)) = - (double (*)_ANSI_ARGS_((double))) clientData; - - /* - * Set stackPtr and stackTop from eePtr. - */ - - result = TCL_OK; - CACHE_STACK_INFO(); - - /* - * Pop the function's argument from the evaluation stack. Convert it - * to a double if necessary. - */ - - valuePtr = POP_OBJECT(); - - if (VerifyExprObjType(interp, valuePtr) != TCL_OK) { - result = TCL_ERROR; - goto done; - } - - GET_DOUBLE_VALUE(d, valuePtr, valuePtr->typePtr); - - errno = 0; - dResult = (*func)(d); - if ((errno != 0) || IS_NAN(dResult) || IS_INF(dResult)) { - TclExprFloatError(interp, dResult); - result = TCL_ERROR; - goto done; - } - - /* - * Push a Tcl object holding the result. - */ - - PUSH_OBJECT(Tcl_NewDoubleObj(dResult)); - - /* - * Reflect the change to stackTop back in eePtr. - */ - - done: - TclDecrRefCount(valuePtr); - DECACHE_STACK_INFO(); - return result; -} - -static int -ExprBinaryFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Contains the address of a procedure that - * takes two double arguments and - * returns a double result. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - register Tcl_Obj *valuePtr, *value2Ptr; - double d1, d2, dResult; - int result; - - double (*func) _ANSI_ARGS_((double, double)) - = (double (*)_ANSI_ARGS_((double, double))) clientData; - - /* - * Set stackPtr and stackTop from eePtr. - */ - - result = TCL_OK; - CACHE_STACK_INFO(); - - /* - * Pop the function's two arguments from the evaluation stack. Convert - * them to doubles if necessary. - */ - - value2Ptr = POP_OBJECT(); - valuePtr = POP_OBJECT(); - - if ((VerifyExprObjType(interp, valuePtr) != TCL_OK) || - (VerifyExprObjType(interp, value2Ptr) != TCL_OK)) { - result = TCL_ERROR; - goto done; - } - - GET_DOUBLE_VALUE(d1, valuePtr, valuePtr->typePtr); - GET_DOUBLE_VALUE(d2, value2Ptr, value2Ptr->typePtr); - - errno = 0; - dResult = (*func)(d1, d2); - if ((errno != 0) || IS_NAN(dResult) || IS_INF(dResult)) { - TclExprFloatError(interp, dResult); - result = TCL_ERROR; - goto done; - } - - /* - * Push a Tcl object holding the result. - */ - - PUSH_OBJECT(Tcl_NewDoubleObj(dResult)); - - /* - * Reflect the change to stackTop back in eePtr. - */ - - done: - TclDecrRefCount(valuePtr); - TclDecrRefCount(value2Ptr); - DECACHE_STACK_INFO(); - return result; -} - -static int -ExprAbsFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Ignored. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - register Tcl_Obj *valuePtr; - long i, iResult; - double d, dResult; - int result; - - /* - * Set stackPtr and stackTop from eePtr. - */ - - result = TCL_OK; - CACHE_STACK_INFO(); - - /* - * Pop the argument from the evaluation stack. - */ - - valuePtr = POP_OBJECT(); - - if (VerifyExprObjType(interp, valuePtr) != TCL_OK) { - result = TCL_ERROR; - goto done; - } - - /* - * Push a Tcl object with the result. - */ - if (valuePtr->typePtr == &tclIntType) { - i = valuePtr->internalRep.longValue; - if (i < 0) { - if (i == LONG_MIN) { -#ifdef TCL_WIDE_INT_IS_LONG - Tcl_SetObjResult(interp, Tcl_NewStringObj( - "integer value too large to represent", -1)); - Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW", - "integer value too large to represent", (char *) NULL); - result = TCL_ERROR; - goto done; -#else - /* - * Special case: abs(MIN_INT) must promote to wide. - */ - - PUSH_OBJECT( Tcl_NewWideIntObj(-(Tcl_WideInt) i) ); - result = TCL_OK; - goto done; -#endif - - } - iResult = -i; - } else { - iResult = i; - } - PUSH_OBJECT(Tcl_NewLongObj(iResult)); - } else if (valuePtr->typePtr == &tclWideIntType) { - Tcl_WideInt wResult, w; - TclGetWide(w,valuePtr); - if (w < W0) { - wResult = -w; - if (wResult < 0) { - Tcl_ResetResult(interp); - Tcl_AppendToObj(Tcl_GetObjResult(interp), - "integer value too large to represent", -1); - Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW", - "integer value too large to represent", (char *) NULL); - result = TCL_ERROR; - goto done; - } - } else { - wResult = w; - } - PUSH_OBJECT(Tcl_NewWideIntObj(wResult)); - } else { - d = valuePtr->internalRep.doubleValue; - if (d < 0.0) { - dResult = -d; - } else if (d == -0.0) { - /* We need to distinguish here between positive 0.0 and - * negative -0.0, see Bug ID #2954959. - */ - static const double poszero = 0.0; - if (memcmp(&d, &poszero, sizeof(double))) { - dResult = -d; - } else { - dResult = d; - } - } else { - dResult = d; - } - if (IS_NAN(dResult) || IS_INF(dResult)) { - TclExprFloatError(interp, dResult); - result = TCL_ERROR; - goto done; - } - PUSH_OBJECT(Tcl_NewDoubleObj(dResult)); - } - - /* - * Reflect the change to stackTop back in eePtr. - */ - - done: - TclDecrRefCount(valuePtr); - DECACHE_STACK_INFO(); - return result; -} - -static int -ExprDoubleFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Ignored. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - register Tcl_Obj *valuePtr; - double dResult; - int result; - - /* - * Set stackPtr and stackTop from eePtr. - */ - - result = TCL_OK; - CACHE_STACK_INFO(); - - /* - * Pop the argument from the evaluation stack. - */ - - valuePtr = POP_OBJECT(); - - if (VerifyExprObjType(interp, valuePtr) != TCL_OK) { - result = TCL_ERROR; - goto done; - } - - GET_DOUBLE_VALUE(dResult, valuePtr, valuePtr->typePtr); - - /* - * Push a Tcl object with the result. - */ - - PUSH_OBJECT(Tcl_NewDoubleObj(dResult)); - - /* - * Reflect the change to stackTop back in eePtr. - */ - - done: - TclDecrRefCount(valuePtr); - DECACHE_STACK_INFO(); - return result; -} - -static int -ExprIntFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Ignored. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - register Tcl_Obj *valuePtr; - long iResult; - double d; - int result; - - /* - * Set stackPtr and stackTop from eePtr. - */ - - result = TCL_OK; - CACHE_STACK_INFO(); - - /* - * Pop the argument from the evaluation stack. - */ - - valuePtr = POP_OBJECT(); - - if (VerifyExprObjType(interp, valuePtr) != TCL_OK) { - result = TCL_ERROR; - goto done; - } - - if (valuePtr->typePtr == &tclIntType) { - iResult = valuePtr->internalRep.longValue; - } else if (valuePtr->typePtr == &tclWideIntType) { - TclGetLongFromWide(iResult,valuePtr); - } else { - d = valuePtr->internalRep.doubleValue; - if (d < 0.0) { - if (d < (double) (long) LONG_MIN) { - tooLarge: - Tcl_ResetResult(interp); - Tcl_AppendToObj(Tcl_GetObjResult(interp), - "integer value too large to represent", -1); - Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW", - "integer value too large to represent", (char *) NULL); - result = TCL_ERROR; - goto done; - } - } else { - if (d > (double) LONG_MAX) { - goto tooLarge; - } - } - if (IS_NAN(d) || IS_INF(d)) { - TclExprFloatError(interp, d); - result = TCL_ERROR; - goto done; - } - iResult = (long) d; - } - - /* - * Push a Tcl object with the result. - */ - - PUSH_OBJECT(Tcl_NewLongObj(iResult)); - - /* - * Reflect the change to stackTop back in eePtr. - */ - - done: - TclDecrRefCount(valuePtr); - DECACHE_STACK_INFO(); - return result; -} - -static int -ExprWideFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Ignored. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - register Tcl_Obj *valuePtr; - Tcl_WideInt wResult; - double d; - int result; - - /* - * Set stackPtr and stackTop from eePtr. - */ - - result = TCL_OK; - CACHE_STACK_INFO(); - - /* - * Pop the argument from the evaluation stack. - */ - - valuePtr = POP_OBJECT(); - - if (VerifyExprObjType(interp, valuePtr) != TCL_OK) { - result = TCL_ERROR; - goto done; - } - - if (valuePtr->typePtr == &tclWideIntType) { - TclGetWide(wResult,valuePtr); - } else if (valuePtr->typePtr == &tclIntType) { - wResult = Tcl_LongAsWide(valuePtr->internalRep.longValue); - } else { - d = valuePtr->internalRep.doubleValue; - if (d < 0.0) { - if (d < Tcl_WideAsDouble(LLONG_MIN)) { - tooLarge: - Tcl_ResetResult(interp); - Tcl_AppendToObj(Tcl_GetObjResult(interp), - "integer value too large to represent", -1); - Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW", - "integer value too large to represent", (char *) NULL); - result = TCL_ERROR; - goto done; - } - } else { - if (d > Tcl_WideAsDouble(LLONG_MAX)) { - goto tooLarge; - } - } - if (IS_NAN(d) || IS_INF(d)) { - TclExprFloatError(interp, d); - result = TCL_ERROR; - goto done; - } - wResult = Tcl_DoubleAsWide(d); - } - - /* - * Push a Tcl object with the result. - */ - - PUSH_OBJECT(Tcl_NewWideIntObj(wResult)); - - /* - * Reflect the change to stackTop back in eePtr. - */ - - done: - TclDecrRefCount(valuePtr); - DECACHE_STACK_INFO(); - return result; -} - -static int -ExprRandFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Ignored. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - Interp *iPtr = (Interp *) interp; - double dResult; - long tmp; /* Algorithm assumes at least 32 bits. - * Only long guarantees that. See below. */ - - if (!(iPtr->flags & RAND_SEED_INITIALIZED)) { - iPtr->flags |= RAND_SEED_INITIALIZED; - - /* - * Take into consideration the thread this interp is running in order - * to insure different seeds in different threads (bug #416643) - */ - - iPtr->randSeed = TclpGetClicks() + ((long)Tcl_GetCurrentThread()<<12); - - /* - * Make sure 1 <= randSeed <= (2^31) - 2. See below. - */ - - iPtr->randSeed &= (unsigned long) 0x7fffffff; - if ((iPtr->randSeed == 0) || (iPtr->randSeed == 0x7fffffff)) { - iPtr->randSeed ^= 123459876; - } - } - - /* - * Set stackPtr and stackTop from eePtr. - */ - - CACHE_STACK_INFO(); - - /* - * Generate the random number using the linear congruential - * generator defined by the following recurrence: - * seed = ( IA * seed ) mod IM - * where IA is 16807 and IM is (2^31) - 1. The recurrence maps - * a seed in the range [1, IM - 1] to a new seed in that same range. - * The recurrence maps IM to 0, and maps 0 back to 0, so those two - * values must not be allowed as initial values of seed. - * - * In order to avoid potential problems with integer overflow, the - * recurrence is implemented in terms of additional constants - * IQ and IR such that - * IM = IA*IQ + IR - * None of the operations in the implementation overflows a 32-bit - * signed integer, and the C type long is guaranteed to be at least - * 32 bits wide. - * - * For more details on how this algorithm works, refer to the following - * papers: - * - * S.K. Park & K.W. Miller, "Random number generators: good ones - * are hard to find," Comm ACM 31(10):1192-1201, Oct 1988 - * - * W.H. Press & S.A. Teukolsky, "Portable random number - * generators," Computers in Physics 6(5):522-524, Sep/Oct 1992. - */ - -#define RAND_IA 16807 -#define RAND_IM 2147483647 -#define RAND_IQ 127773 -#define RAND_IR 2836 -#define RAND_MASK 123459876 - - tmp = iPtr->randSeed/RAND_IQ; - iPtr->randSeed = RAND_IA*(iPtr->randSeed - tmp*RAND_IQ) - RAND_IR*tmp; - if (iPtr->randSeed < 0) { - iPtr->randSeed += RAND_IM; - } - - /* - * Since the recurrence keeps seed values in the range [1, RAND_IM - 1], - * dividing by RAND_IM yields a double in the range (0, 1). - */ - - dResult = iPtr->randSeed * (1.0/RAND_IM); - - /* - * Push a Tcl object with the result. - */ - - PUSH_OBJECT(Tcl_NewDoubleObj(dResult)); - - /* - * Reflect the change to stackTop back in eePtr. - */ - - DECACHE_STACK_INFO(); - return TCL_OK; -} - -static int -ExprRoundFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Ignored. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - Tcl_Obj *valuePtr, *resPtr; - double d, f, i; - int result; - - /* - * Set stackPtr and stackTop from eePtr. - */ - - result = TCL_OK; - CACHE_STACK_INFO(); - - /* - * Pop the argument from the evaluation stack. - */ - - valuePtr = POP_OBJECT(); - - if (VerifyExprObjType(interp, valuePtr) != TCL_OK) { - result = TCL_ERROR; - goto done; - } - - if ((valuePtr->typePtr == &tclIntType) || - (valuePtr->typePtr == &tclWideIntType)) { - result = TCL_OK; - resPtr = valuePtr; - } else { - - /* - * Round the number to the nearest integer. I'd like to use round(), - * but it's C99 (or BSD), and not yet universal. - */ - - d = valuePtr->internalRep.doubleValue; - f = modf(d, &i); - if (d < 0.0) { - if (f <= -0.5) { - i += -1.0; - } - if (i <= Tcl_WideAsDouble(LLONG_MIN)) { - goto tooLarge; - } else if (i <= (double) LONG_MIN) { - resPtr = Tcl_NewWideIntObj(Tcl_DoubleAsWide(i)); - } else { - resPtr = Tcl_NewLongObj((long) i); - } - } else { - if (f >= 0.5) { - i += 1.0; - } - if (i >= Tcl_WideAsDouble(LLONG_MAX)) { - goto tooLarge; - } else if (i >= (double) LONG_MAX) { - resPtr = Tcl_NewWideIntObj(Tcl_DoubleAsWide(i)); - } else { - resPtr = Tcl_NewLongObj((long) i); - } - } - } - - /* - * Push the result object and free the argument Tcl_Obj. - */ - - PUSH_OBJECT(resPtr); - - done: - TclDecrRefCount(valuePtr); - DECACHE_STACK_INFO(); - return result; - - /* - * Error return: result cannot be represented as an integer. - */ - - tooLarge: - Tcl_ResetResult(interp); - Tcl_AppendToObj(Tcl_GetObjResult(interp), - "integer value too large to represent", -1); - Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW", - "integer value too large to represent", - (char *) NULL); - result = TCL_ERROR; - goto done; -} - -static int -ExprSrandFunc(interp, eePtr, clientData) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - ClientData clientData; /* Ignored. */ -{ - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - Interp *iPtr = (Interp *) interp; - Tcl_Obj *valuePtr; - long i = 0; /* Initialized to avoid compiler warning. */ - - /* - * Set stackPtr and stackTop from eePtr. - */ - - CACHE_STACK_INFO(); - - /* - * Pop the argument from the evaluation stack. Use the value - * to reset the random number seed. - */ - - valuePtr = POP_OBJECT(); - - if (VerifyExprObjType(interp, valuePtr) != TCL_OK) { - goto badValue; - } - - if (Tcl_GetLongFromObj(NULL, valuePtr, &i) != TCL_OK) { - Tcl_WideInt w; - - if (Tcl_GetWideIntFromObj(interp, valuePtr, &w) != TCL_OK) { - badValue: - Tcl_AddErrorInfo(interp, "\n (argument to \"srand()\")"); - TclDecrRefCount(valuePtr); - DECACHE_STACK_INFO(); - return TCL_ERROR; - } - - i = Tcl_WideAsLong(w); - } - - /* - * Reset the seed. Make sure 1 <= randSeed <= 2^31 - 2. - * See comments in ExprRandFunc() for more details. - */ - - iPtr->flags |= RAND_SEED_INITIALIZED; - iPtr->randSeed = i; - iPtr->randSeed &= (unsigned long) 0x7fffffff; - if ((iPtr->randSeed == 0) || (iPtr->randSeed == 0x7fffffff)) { - iPtr->randSeed ^= 123459876; - } - - /* - * To avoid duplicating the random number generation code we simply - * clean up our state and call the real random number function. That - * function will always succeed. - */ - - TclDecrRefCount(valuePtr); - DECACHE_STACK_INFO(); - - ExprRandFunc(interp, eePtr, clientData); - return TCL_OK; -} - -/* - *---------------------------------------------------------------------- - * - * ExprCallMathFunc -- - * - * This procedure is invoked to call a non-builtin math function - * during the execution of an expression. - * - * Results: - * TCL_OK is returned if all went well and the function's value - * was computed successfully. If an error occurred, TCL_ERROR - * is returned and an error message is left in the interpreter's - * result. After a successful return this procedure pushes a Tcl object - * holding the result. - * - * Side effects: - * None, unless the called math function has side effects. - * - *---------------------------------------------------------------------- - */ - -static int -ExprCallMathFunc(interp, eePtr, objc, objv) - Tcl_Interp *interp; /* The interpreter in which to execute the - * function. */ - ExecEnv *eePtr; /* Points to the environment for executing - * the function. */ - int objc; /* Number of arguments. The function name is - * the 0-th argument. */ - Tcl_Obj **objv; /* The array of arguments. The function name - * is objv[0]. */ -{ - Interp *iPtr = (Interp *) interp; - Tcl_Obj **stackPtr; /* Cached evaluation stack base pointer. */ - register int stackTop; /* Cached top index of evaluation stack. */ - char *funcName; - Tcl_HashEntry *hPtr; - MathFunc *mathFuncPtr; /* Information about math function. */ - Tcl_Value args[MAX_MATH_ARGS]; /* Arguments for function call. */ - Tcl_Value funcResult; /* Result of function call as Tcl_Value. */ - register Tcl_Obj *valuePtr; - long i; - double d; - int j, k, result; - - Tcl_ResetResult(interp); - - /* - * Set stackPtr and stackTop from eePtr. - */ - - CACHE_STACK_INFO(); - - /* - * Look up the MathFunc record for the function. - */ - - funcName = TclGetString(objv[0]); - hPtr = Tcl_FindHashEntry(&iPtr->mathFuncTable, funcName); - if (hPtr == NULL) { - Tcl_AppendStringsToObj(Tcl_GetObjResult(interp), - "unknown math function \"", funcName, "\"", (char *) NULL); - result = TCL_ERROR; - goto done; - } - mathFuncPtr = (MathFunc *) Tcl_GetHashValue(hPtr); - if (mathFuncPtr->numArgs != (objc-1)) { - panic("ExprCallMathFunc: expected number of args %d != actual number %d", - mathFuncPtr->numArgs, objc); - result = TCL_ERROR; - goto done; - } - - /* - * Collect the arguments for the function, if there are any, into the - * array "args". Note that args[0] will have the Tcl_Value that - * corresponds to objv[1]. - */ - - for (j = 1, k = 0; j < objc; j++, k++) { - valuePtr = objv[j]; - - if (VerifyExprObjType(interp, valuePtr) != TCL_OK) { - result = TCL_ERROR; - goto done; - } - - /* - * Copy the object's numeric value to the argument record, - * converting it if necessary. - */ - - if (valuePtr->typePtr == &tclIntType) { - i = valuePtr->internalRep.longValue; - if (mathFuncPtr->argTypes[k] == TCL_DOUBLE) { - args[k].type = TCL_DOUBLE; - args[k].doubleValue = i; - } else if (mathFuncPtr->argTypes[k] == TCL_WIDE_INT) { - args[k].type = TCL_WIDE_INT; - args[k].wideValue = Tcl_LongAsWide(i); - } else { - args[k].type = TCL_INT; - args[k].intValue = i; - } - } else if (valuePtr->typePtr == &tclWideIntType) { - Tcl_WideInt w; - TclGetWide(w,valuePtr); - if (mathFuncPtr->argTypes[k] == TCL_DOUBLE) { - args[k].type = TCL_DOUBLE; - args[k].doubleValue = Tcl_WideAsDouble(w); - } else if (mathFuncPtr->argTypes[k] == TCL_INT) { - args[k].type = TCL_INT; - args[k].intValue = Tcl_WideAsLong(w); - } else { - args[k].type = TCL_WIDE_INT; - args[k].wideValue = w; - } - } else { - d = valuePtr->internalRep.doubleValue; - if (mathFuncPtr->argTypes[k] == TCL_INT) { - args[k].type = TCL_INT; - args[k].intValue = (long) d; - } else if (mathFuncPtr->argTypes[k] == TCL_WIDE_INT) { - args[k].type = TCL_WIDE_INT; - args[k].wideValue = Tcl_DoubleAsWide(d); - } else { - args[k].type = TCL_DOUBLE; - args[k].doubleValue = d; - } - } - } - - /* - * Invoke the function and copy its result back into valuePtr. - */ - - result = (*mathFuncPtr->proc)(mathFuncPtr->clientData, interp, args, - &funcResult); - if (result != TCL_OK) { - goto done; - } - - /* - * Pop the objc top stack elements and decrement their ref counts. - */ - - k = (stackTop - (objc-1)); - while (stackTop >= k) { - valuePtr = POP_OBJECT(); - TclDecrRefCount(valuePtr); - } - - /* - * Push the call's object result. - */ - - if (funcResult.type == TCL_INT) { - PUSH_OBJECT(Tcl_NewLongObj(funcResult.intValue)); - } else if (funcResult.type == TCL_WIDE_INT) { - PUSH_OBJECT(Tcl_NewWideIntObj(funcResult.wideValue)); - } else { - d = funcResult.doubleValue; - if (IS_NAN(d) || IS_INF(d)) { - TclExprFloatError(interp, d); - result = TCL_ERROR; - goto done; - } - PUSH_OBJECT(Tcl_NewDoubleObj(d)); - } - - /* - * Reflect the change to stackTop back in eePtr. - */ - - done: - DECACHE_STACK_INFO(); - return result; -} - -/* - *---------------------------------------------------------------------- - * * TclExprFloatError -- * - * This procedure is called when an error occurs during a - * floating-point operation. It reads errno and sets - * interp->objResultPtr accordingly. + * This procedure is called when an error occurs during a floating-point + * operation. It reads errno and sets interp->objResultPtr accordingly. * * Results: * interp->objResultPtr is set to hold an error message. @@ -6064,34 +8049,34 @@ ExprCallMathFunc(interp, eePtr, objc, objv) */ void -TclExprFloatError(interp, value) - Tcl_Interp *interp; /* Where to store error message. */ - double value; /* Value returned after error; used to +TclExprFloatError( + Tcl_Interp *interp, /* Where to store error message. */ + double value) /* Value returned after error; used to * distinguish underflows from overflows. */ { - char *s; + const char *s; - Tcl_ResetResult(interp); - if ((errno == EDOM) || IS_NAN(value)) { + if ((errno == EDOM) || TclIsNaN(value)) { s = "domain error: argument not in valid range"; - Tcl_AppendToObj(Tcl_GetObjResult(interp), s, -1); - Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", s, (char *) NULL); - } else if ((errno == ERANGE) || IS_INF(value)) { + Tcl_SetObjResult(interp, Tcl_NewStringObj(s, -1)); + Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", s, NULL); + } else if ((errno == ERANGE) || TclIsInfinite(value)) { if (value == 0.0) { s = "floating-point value too small to represent"; - Tcl_AppendToObj(Tcl_GetObjResult(interp), s, -1); - Tcl_SetErrorCode(interp, "ARITH", "UNDERFLOW", s, (char *) NULL); + Tcl_SetObjResult(interp, Tcl_NewStringObj(s, -1)); + Tcl_SetErrorCode(interp, "ARITH", "UNDERFLOW", s, NULL); } else { s = "floating-point value too large to represent"; - Tcl_AppendToObj(Tcl_GetObjResult(interp), s, -1); - Tcl_SetErrorCode(interp, "ARITH", "OVERFLOW", s, (char *) NULL); + Tcl_SetObjResult(interp, Tcl_NewStringObj(s, -1)); + Tcl_SetErrorCode(interp, "ARITH", "OVERFLOW", s, NULL); } } else { - char msg[64 + TCL_INTEGER_SPACE]; - - sprintf(msg, "unknown floating-point error, errno = %d", errno); - Tcl_AppendToObj(Tcl_GetObjResult(interp), msg, -1); - Tcl_SetErrorCode(interp, "ARITH", "UNKNOWN", msg, (char *) NULL); + Tcl_Obj *objPtr = Tcl_ObjPrintf( + "unknown floating-point error, errno = %d", errno); + + Tcl_SetErrorCode(interp, "ARITH", "UNKNOWN", + Tcl_GetString(objPtr), NULL); + Tcl_SetObjResult(interp, objPtr); } } @@ -6105,8 +8090,8 @@ TclExprFloatError(interp, value) * the log base 2 of an integer. * * Results: - * Returns the log base 2 of the operand. If the argument is less - * than or equal to zero, a zero is returned. + * Returns the log base 2 of the operand. If the argument is less than or + * equal to zero, a zero is returned. * * Side effects: * None. @@ -6115,9 +8100,9 @@ TclExprFloatError(interp, value) */ int -TclLog2(value) - register int value; /* The integer for which to compute the - * log base 2. */ +TclLog2( + register int value) /* The integer for which to compute the log + * base 2. */ { register int n = value; register int result = 0; @@ -6147,15 +8132,15 @@ TclLog2(value) */ static int -EvalStatsCmd(unused, interp, objc, objv) - ClientData unused; /* Unused. */ - Tcl_Interp *interp; /* The current interpreter. */ - int objc; /* The number of arguments. */ - Tcl_Obj *CONST objv[]; /* The argument strings. */ +EvalStatsCmd( + ClientData unused, /* Unused. */ + Tcl_Interp *interp, /* The current interpreter. */ + int objc, /* The number of arguments. */ + Tcl_Obj *const objv[]) /* The argument strings. */ { Interp *iPtr = (Interp *) interp; - LiteralTable *globalTablePtr = &(iPtr->literalTable); - ByteCodeStats *statsPtr = &(iPtr->stats); + LiteralTable *globalTablePtr = &iPtr->literalTable; + ByteCodeStats *statsPtr = &iPtr->stats; double totalCodeBytes, currentCodeBytes; double totalLiteralBytes, currentLiteralBytes; double objBytesIfUnshared, strBytesIfUnshared, sharingBytesSaved; @@ -6167,12 +8152,18 @@ EvalStatsCmd(unused, interp, objc, objv) int decadeHigh, minSizeDecade, maxSizeDecade, length, i; char *litTableStats; LiteralEntry *entryPtr; + Tcl_Obj *objPtr; + +#define Percent(a,b) ((a) * 100.0 / (b)) + + objPtr = Tcl_NewObj(); + Tcl_IncrRefCount(objPtr); numInstructions = 0.0; for (i = 0; i < 256; i++) { - if (statsPtr->instructionCount[i] != 0) { - numInstructions += statsPtr->instructionCount[i]; - } + if (statsPtr->instructionCount[i] != 0) { + numInstructions += statsPtr->instructionCount[i]; + } } totalLiteralBytes = sizeof(LiteralTable) @@ -6185,7 +8176,7 @@ EvalStatsCmd(unused, interp, objc, objv) numCurrentByteCodes = statsPtr->numCompilations - statsPtr->numByteCodesFreed; currentHeaderBytes = numCurrentByteCodes - * (sizeof(ByteCode) - (sizeof(size_t) + sizeof(Tcl_Time))); + * (sizeof(ByteCode) - sizeof(size_t) - sizeof(Tcl_Time)); literalMgmtBytes = sizeof(LiteralTable) + (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)) + (iPtr->literalTable.numEntries * sizeof(LiteralEntry)); @@ -6193,94 +8184,93 @@ EvalStatsCmd(unused, interp, objc, objv) + iPtr->literalTable.numEntries * sizeof(Tcl_Obj) + statsPtr->currentLitStringBytes; currentCodeBytes = statsPtr->currentByteCodeBytes + currentLiteralBytes; - + /* * Summary statistics, total and current source and ByteCode sizes. */ - fprintf(stdout, "\n----------------------------------------------------------------\n"); - fprintf(stdout, - "Compilation and execution statistics for interpreter 0x%x\n", - (unsigned int) iPtr); + Tcl_AppendPrintfToObj(objPtr, "\n----------------------------------------------------------------\n"); + Tcl_AppendPrintfToObj(objPtr, + "Compilation and execution statistics for interpreter %#lx\n", + iPtr); - fprintf(stdout, "\nNumber ByteCodes executed %ld\n", + Tcl_AppendPrintfToObj(objPtr, "\nNumber ByteCodes executed %ld\n", statsPtr->numExecutions); - fprintf(stdout, "Number ByteCodes compiled %ld\n", + Tcl_AppendPrintfToObj(objPtr, "Number ByteCodes compiled %ld\n", statsPtr->numCompilations); - fprintf(stdout, " Mean executions/compile %.1f\n", - ((float)statsPtr->numExecutions) / ((float)statsPtr->numCompilations)); - - fprintf(stdout, "\nInstructions executed %.0f\n", + Tcl_AppendPrintfToObj(objPtr, " Mean executions/compile %.1f\n", + statsPtr->numExecutions / (float)statsPtr->numCompilations); + + Tcl_AppendPrintfToObj(objPtr, "\nInstructions executed %.0f\n", numInstructions); - fprintf(stdout, " Mean inst/compile %.0f\n", + Tcl_AppendPrintfToObj(objPtr, " Mean inst/compile %.0f\n", numInstructions / statsPtr->numCompilations); - fprintf(stdout, " Mean inst/execution %.0f\n", + Tcl_AppendPrintfToObj(objPtr, " Mean inst/execution %.0f\n", numInstructions / statsPtr->numExecutions); - fprintf(stdout, "\nTotal ByteCodes %ld\n", + Tcl_AppendPrintfToObj(objPtr, "\nTotal ByteCodes %ld\n", statsPtr->numCompilations); - fprintf(stdout, " Source bytes %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " Source bytes %.6g\n", statsPtr->totalSrcBytes); - fprintf(stdout, " Code bytes %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " Code bytes %.6g\n", totalCodeBytes); - fprintf(stdout, " ByteCode bytes %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " ByteCode bytes %.6g\n", statsPtr->totalByteCodeBytes); - fprintf(stdout, " Literal bytes %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " Literal bytes %.6g\n", totalLiteralBytes); - fprintf(stdout, " table %u + bkts %lu + entries %lu + objects %lu + strings %.6g\n", - (unsigned int)sizeof(LiteralTable), - (unsigned long)iPtr->literalTable.numBuckets * sizeof(LiteralEntry *), - (unsigned long)statsPtr->numLiteralsCreated * sizeof(LiteralEntry), - (unsigned long)statsPtr->numLiteralsCreated * sizeof(Tcl_Obj), + Tcl_AppendPrintfToObj(objPtr, " table %lu + bkts %lu + entries %lu + objects %lu + strings %.6g\n", + (unsigned long) sizeof(LiteralTable), + (unsigned long) (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)), + (unsigned long) (statsPtr->numLiteralsCreated * sizeof(LiteralEntry)), + (unsigned long) (statsPtr->numLiteralsCreated * sizeof(Tcl_Obj)), statsPtr->totalLitStringBytes); - fprintf(stdout, " Mean code/compile %.1f\n", + Tcl_AppendPrintfToObj(objPtr, " Mean code/compile %.1f\n", totalCodeBytes / statsPtr->numCompilations); - fprintf(stdout, " Mean code/source %.1f\n", + Tcl_AppendPrintfToObj(objPtr, " Mean code/source %.1f\n", totalCodeBytes / statsPtr->totalSrcBytes); - fprintf(stdout, "\nCurrent (active) ByteCodes %ld\n", + Tcl_AppendPrintfToObj(objPtr, "\nCurrent (active) ByteCodes %ld\n", numCurrentByteCodes); - fprintf(stdout, " Source bytes %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " Source bytes %.6g\n", statsPtr->currentSrcBytes); - fprintf(stdout, " Code bytes %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " Code bytes %.6g\n", currentCodeBytes); - fprintf(stdout, " ByteCode bytes %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " ByteCode bytes %.6g\n", statsPtr->currentByteCodeBytes); - fprintf(stdout, " Literal bytes %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " Literal bytes %.6g\n", currentLiteralBytes); - fprintf(stdout, " table %u + bkts %lu + entries %lu + objects %lu + strings %.6g\n", - (unsigned int)sizeof(LiteralTable), - (unsigned long)iPtr->literalTable.numBuckets * sizeof(LiteralEntry *), - (unsigned long)iPtr->literalTable.numEntries * sizeof(LiteralEntry), - (unsigned long)iPtr->literalTable.numEntries * sizeof(Tcl_Obj), + Tcl_AppendPrintfToObj(objPtr, " table %lu + bkts %lu + entries %lu + objects %lu + strings %.6g\n", + (unsigned long) sizeof(LiteralTable), + (unsigned long) (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(LiteralEntry)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(Tcl_Obj)), statsPtr->currentLitStringBytes); - fprintf(stdout, " Mean code/source %.1f\n", + Tcl_AppendPrintfToObj(objPtr, " Mean code/source %.1f\n", currentCodeBytes / statsPtr->currentSrcBytes); - fprintf(stdout, " Code + source bytes %.6g (%0.1f mean code/src)\n", + Tcl_AppendPrintfToObj(objPtr, " Code + source bytes %.6g (%0.1f mean code/src)\n", (currentCodeBytes + statsPtr->currentSrcBytes), (currentCodeBytes / statsPtr->currentSrcBytes) + 1.0); /* * Tcl_IsShared statistics check * - * This gives the refcount of each obj as Tcl_IsShared was called - * for it. Shared objects must be duplicated before they can be - * modified. + * This gives the refcount of each obj as Tcl_IsShared was called for it. + * Shared objects must be duplicated before they can be modified. */ numSharedMultX = 0; - fprintf(stdout, "\nTcl_IsShared object check (all objects):\n"); - fprintf(stdout, " Object had refcount <=1 (not shared) %ld\n", + Tcl_AppendPrintfToObj(objPtr, "\nTcl_IsShared object check (all objects):\n"); + Tcl_AppendPrintfToObj(objPtr, " Object had refcount <=1 (not shared) %ld\n", tclObjsShared[1]); for (i = 2; i < TCL_MAX_SHARED_OBJ_STATS; i++) { - fprintf(stdout, " refcount ==%d %ld\n", + Tcl_AppendPrintfToObj(objPtr, " refcount ==%d %ld\n", i, tclObjsShared[i]); numSharedMultX += tclObjsShared[i]; } - fprintf(stdout, " refcount >=%d %ld\n", + Tcl_AppendPrintfToObj(objPtr, " refcount >=%d %ld\n", i, tclObjsShared[0]); numSharedMultX += tclObjsShared[0]; - fprintf(stdout, " Total shared objects %d\n", + Tcl_AppendPrintfToObj(objPtr, " Total shared objects %d\n", numSharedMultX); /* @@ -6290,14 +8280,14 @@ EvalStatsCmd(unused, interp, objc, objv) numByteCodeLits = 0; refCountSum = 0; numSharedMultX = 0; - numSharedOnce = 0; - objBytesIfUnshared = 0.0; - strBytesIfUnshared = 0.0; + numSharedOnce = 0; + objBytesIfUnshared = 0.0; + strBytesIfUnshared = 0.0; strBytesSharedMultX = 0.0; - strBytesSharedOnce = 0.0; + strBytesSharedOnce = 0.0; for (i = 0; i < globalTablePtr->numBuckets; i++) { for (entryPtr = globalTablePtr->buckets[i]; entryPtr != NULL; - entryPtr = entryPtr->nextPtr) { + entryPtr = entryPtr->nextPtr) { if (entryPtr->objPtr->typePtr == &tclByteCodeType) { numByteCodeLits++; } @@ -6317,213 +8307,230 @@ EvalStatsCmd(unused, interp, objc, objv) sharingBytesSaved = (objBytesIfUnshared + strBytesIfUnshared) - currentLiteralBytes; - fprintf(stdout, "\nTotal objects (all interps) %ld\n", + Tcl_AppendPrintfToObj(objPtr, "\nTotal objects (all interps) %ld\n", tclObjsAlloced); - fprintf(stdout, "Current objects %ld\n", + Tcl_AppendPrintfToObj(objPtr, "Current objects %ld\n", (tclObjsAlloced - tclObjsFreed)); - fprintf(stdout, "Total literal objects %ld\n", + Tcl_AppendPrintfToObj(objPtr, "Total literal objects %ld\n", statsPtr->numLiteralsCreated); - fprintf(stdout, "\nCurrent literal objects %d (%0.1f%% of current objects)\n", + Tcl_AppendPrintfToObj(objPtr, "\nCurrent literal objects %d (%0.1f%% of current objects)\n", globalTablePtr->numEntries, - (globalTablePtr->numEntries * 100.0) / (tclObjsAlloced-tclObjsFreed)); - fprintf(stdout, " ByteCode literals %ld (%0.1f%% of current literals)\n", + Percent(globalTablePtr->numEntries, tclObjsAlloced-tclObjsFreed)); + Tcl_AppendPrintfToObj(objPtr, " ByteCode literals %ld (%0.1f%% of current literals)\n", numByteCodeLits, - (numByteCodeLits * 100.0) / globalTablePtr->numEntries); - fprintf(stdout, " Literals reused > 1x %d\n", + Percent(numByteCodeLits, globalTablePtr->numEntries)); + Tcl_AppendPrintfToObj(objPtr, " Literals reused > 1x %d\n", numSharedMultX); - fprintf(stdout, " Mean reference count %.2f\n", + Tcl_AppendPrintfToObj(objPtr, " Mean reference count %.2f\n", ((double) refCountSum) / globalTablePtr->numEntries); - fprintf(stdout, " Mean len, str reused >1x %.2f\n", - (numSharedMultX? (strBytesSharedMultX/numSharedMultX) : 0.0)); - fprintf(stdout, " Mean len, str used 1x %.2f\n", - (numSharedOnce? (strBytesSharedOnce/numSharedOnce) : 0.0)); - fprintf(stdout, " Total sharing savings %.6g (%0.1f%% of bytes if no sharing)\n", + Tcl_AppendPrintfToObj(objPtr, " Mean len, str reused >1x %.2f\n", + (numSharedMultX ? strBytesSharedMultX/numSharedMultX : 0.0)); + Tcl_AppendPrintfToObj(objPtr, " Mean len, str used 1x %.2f\n", + (numSharedOnce ? strBytesSharedOnce/numSharedOnce : 0.0)); + Tcl_AppendPrintfToObj(objPtr, " Total sharing savings %.6g (%0.1f%% of bytes if no sharing)\n", sharingBytesSaved, - (sharingBytesSaved * 100.0) / (objBytesIfUnshared + strBytesIfUnshared)); - fprintf(stdout, " Bytes with sharing %.6g\n", + Percent(sharingBytesSaved, objBytesIfUnshared+strBytesIfUnshared)); + Tcl_AppendPrintfToObj(objPtr, " Bytes with sharing %.6g\n", currentLiteralBytes); - fprintf(stdout, " table %u + bkts %lu + entries %lu + objects %lu + strings %.6g\n", - (unsigned int)sizeof(LiteralTable), - (unsigned long)iPtr->literalTable.numBuckets * sizeof(LiteralEntry *), - (unsigned long)iPtr->literalTable.numEntries * sizeof(LiteralEntry), - (unsigned long)iPtr->literalTable.numEntries * sizeof(Tcl_Obj), + Tcl_AppendPrintfToObj(objPtr, " table %lu + bkts %lu + entries %lu + objects %lu + strings %.6g\n", + (unsigned long) sizeof(LiteralTable), + (unsigned long) (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(LiteralEntry)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(Tcl_Obj)), statsPtr->currentLitStringBytes); - fprintf(stdout, " Bytes if no sharing %.6g = objects %.6g + strings %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " Bytes if no sharing %.6g = objects %.6g + strings %.6g\n", (objBytesIfUnshared + strBytesIfUnshared), objBytesIfUnshared, strBytesIfUnshared); - fprintf(stdout, " String sharing savings %.6g = unshared %.6g - shared %.6g\n", + Tcl_AppendPrintfToObj(objPtr, " String sharing savings %.6g = unshared %.6g - shared %.6g\n", (strBytesIfUnshared - statsPtr->currentLitStringBytes), strBytesIfUnshared, statsPtr->currentLitStringBytes); - fprintf(stdout, " Literal mgmt overhead %ld (%0.1f%% of bytes with sharing)\n", + Tcl_AppendPrintfToObj(objPtr, " Literal mgmt overhead %ld (%0.1f%% of bytes with sharing)\n", literalMgmtBytes, - (literalMgmtBytes * 100.0) / currentLiteralBytes); - fprintf(stdout, " table %u + buckets %lu + entries %lu\n", - (unsigned int)sizeof(LiteralTable), - (unsigned long)iPtr->literalTable.numBuckets * sizeof(LiteralEntry *), - (unsigned long)iPtr->literalTable.numEntries * sizeof(LiteralEntry)); + Percent(literalMgmtBytes, currentLiteralBytes)); + Tcl_AppendPrintfToObj(objPtr, " table %lu + buckets %lu + entries %lu\n", + (unsigned long) sizeof(LiteralTable), + (unsigned long) (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(LiteralEntry))); /* * Breakdown of current ByteCode space requirements. */ - - fprintf(stdout, "\nBreakdown of current ByteCode requirements:\n"); - fprintf(stdout, " Bytes Pct of Avg per\n"); - fprintf(stdout, " total ByteCode\n"); - fprintf(stdout, "Total %12.6g 100.00%% %8.1f\n", + + Tcl_AppendPrintfToObj(objPtr, "\nBreakdown of current ByteCode requirements:\n"); + Tcl_AppendPrintfToObj(objPtr, " Bytes Pct of Avg per\n"); + Tcl_AppendPrintfToObj(objPtr, " total ByteCode\n"); + Tcl_AppendPrintfToObj(objPtr, "Total %12.6g 100.00%% %8.1f\n", statsPtr->currentByteCodeBytes, statsPtr->currentByteCodeBytes / numCurrentByteCodes); - fprintf(stdout, "Header %12.6g %8.1f%% %8.1f\n", + Tcl_AppendPrintfToObj(objPtr, "Header %12.6g %8.1f%% %8.1f\n", currentHeaderBytes, - ((currentHeaderBytes * 100.0) / statsPtr->currentByteCodeBytes), + Percent(currentHeaderBytes, statsPtr->currentByteCodeBytes), currentHeaderBytes / numCurrentByteCodes); - fprintf(stdout, "Instructions %12.6g %8.1f%% %8.1f\n", + Tcl_AppendPrintfToObj(objPtr, "Instructions %12.6g %8.1f%% %8.1f\n", statsPtr->currentInstBytes, - ((statsPtr->currentInstBytes * 100.0) / statsPtr->currentByteCodeBytes), + Percent(statsPtr->currentInstBytes,statsPtr->currentByteCodeBytes), statsPtr->currentInstBytes / numCurrentByteCodes); - fprintf(stdout, "Literal ptr array %12.6g %8.1f%% %8.1f\n", + Tcl_AppendPrintfToObj(objPtr, "Literal ptr array %12.6g %8.1f%% %8.1f\n", statsPtr->currentLitBytes, - ((statsPtr->currentLitBytes * 100.0) / statsPtr->currentByteCodeBytes), + Percent(statsPtr->currentLitBytes,statsPtr->currentByteCodeBytes), statsPtr->currentLitBytes / numCurrentByteCodes); - fprintf(stdout, "Exception table %12.6g %8.1f%% %8.1f\n", + Tcl_AppendPrintfToObj(objPtr, "Exception table %12.6g %8.1f%% %8.1f\n", statsPtr->currentExceptBytes, - ((statsPtr->currentExceptBytes * 100.0) / statsPtr->currentByteCodeBytes), + Percent(statsPtr->currentExceptBytes,statsPtr->currentByteCodeBytes), statsPtr->currentExceptBytes / numCurrentByteCodes); - fprintf(stdout, "Auxiliary data %12.6g %8.1f%% %8.1f\n", + Tcl_AppendPrintfToObj(objPtr, "Auxiliary data %12.6g %8.1f%% %8.1f\n", statsPtr->currentAuxBytes, - ((statsPtr->currentAuxBytes * 100.0) / statsPtr->currentByteCodeBytes), + Percent(statsPtr->currentAuxBytes,statsPtr->currentByteCodeBytes), statsPtr->currentAuxBytes / numCurrentByteCodes); - fprintf(stdout, "Command map %12.6g %8.1f%% %8.1f\n", + Tcl_AppendPrintfToObj(objPtr, "Command map %12.6g %8.1f%% %8.1f\n", statsPtr->currentCmdMapBytes, - ((statsPtr->currentCmdMapBytes * 100.0) / statsPtr->currentByteCodeBytes), + Percent(statsPtr->currentCmdMapBytes,statsPtr->currentByteCodeBytes), statsPtr->currentCmdMapBytes / numCurrentByteCodes); /* * Detailed literal statistics. */ - - fprintf(stdout, "\nLiteral string sizes:\n"); - fprintf(stdout, " Up to length Percentage\n"); + + Tcl_AppendPrintfToObj(objPtr, "\nLiteral string sizes:\n"); + Tcl_AppendPrintfToObj(objPtr, " Up to length Percentage\n"); maxSizeDecade = 0; for (i = 31; i >= 0; i--) { - if (statsPtr->literalCount[i] > 0) { - maxSizeDecade = i; + if (statsPtr->literalCount[i] > 0) { + maxSizeDecade = i; break; - } + } } sum = 0; for (i = 0; i <= maxSizeDecade; i++) { decadeHigh = (1 << (i+1)) - 1; sum += statsPtr->literalCount[i]; - fprintf(stdout, " %10d %8.0f%%\n", - decadeHigh, (sum * 100.0) / statsPtr->numLiteralsCreated); + Tcl_AppendPrintfToObj(objPtr, " %10d %8.0f%%\n", + decadeHigh, Percent(sum, statsPtr->numLiteralsCreated)); } litTableStats = TclLiteralStats(globalTablePtr); - fprintf(stdout, "\nCurrent literal table statistics:\n%s\n", - litTableStats); + Tcl_AppendPrintfToObj(objPtr, "\nCurrent literal table statistics:\n%s\n", + litTableStats); ckfree((char *) litTableStats); /* * Source and ByteCode size distributions. */ - fprintf(stdout, "\nSource sizes:\n"); - fprintf(stdout, " Up to size Percentage\n"); + Tcl_AppendPrintfToObj(objPtr, "\nSource sizes:\n"); + Tcl_AppendPrintfToObj(objPtr, " Up to size Percentage\n"); minSizeDecade = maxSizeDecade = 0; for (i = 0; i < 31; i++) { - if (statsPtr->srcCount[i] > 0) { + if (statsPtr->srcCount[i] > 0) { minSizeDecade = i; break; - } + } } for (i = 31; i >= 0; i--) { - if (statsPtr->srcCount[i] > 0) { - maxSizeDecade = i; + if (statsPtr->srcCount[i] > 0) { + maxSizeDecade = i; break; - } + } } sum = 0; for (i = minSizeDecade; i <= maxSizeDecade; i++) { decadeHigh = (1 << (i+1)) - 1; sum += statsPtr->srcCount[i]; - fprintf(stdout, " %10d %8.0f%%\n", - decadeHigh, (sum * 100.0) / statsPtr->numCompilations); + Tcl_AppendPrintfToObj(objPtr, " %10d %8.0f%%\n", + decadeHigh, Percent(sum, statsPtr->numCompilations)); } - fprintf(stdout, "\nByteCode sizes:\n"); - fprintf(stdout, " Up to size Percentage\n"); + Tcl_AppendPrintfToObj(objPtr, "\nByteCode sizes:\n"); + Tcl_AppendPrintfToObj(objPtr, " Up to size Percentage\n"); minSizeDecade = maxSizeDecade = 0; for (i = 0; i < 31; i++) { - if (statsPtr->byteCodeCount[i] > 0) { + if (statsPtr->byteCodeCount[i] > 0) { minSizeDecade = i; break; - } + } } for (i = 31; i >= 0; i--) { - if (statsPtr->byteCodeCount[i] > 0) { - maxSizeDecade = i; + if (statsPtr->byteCodeCount[i] > 0) { + maxSizeDecade = i; break; - } + } } sum = 0; for (i = minSizeDecade; i <= maxSizeDecade; i++) { decadeHigh = (1 << (i+1)) - 1; sum += statsPtr->byteCodeCount[i]; - fprintf(stdout, " %10d %8.0f%%\n", - decadeHigh, (sum * 100.0) / statsPtr->numCompilations); + Tcl_AppendPrintfToObj(objPtr, " %10d %8.0f%%\n", + decadeHigh, Percent(sum, statsPtr->numCompilations)); } - fprintf(stdout, "\nByteCode longevity (excludes Current ByteCodes):\n"); - fprintf(stdout, " Up to ms Percentage\n"); + Tcl_AppendPrintfToObj(objPtr, "\nByteCode longevity (excludes Current ByteCodes):\n"); + Tcl_AppendPrintfToObj(objPtr, " Up to ms Percentage\n"); minSizeDecade = maxSizeDecade = 0; for (i = 0; i < 31; i++) { - if (statsPtr->lifetimeCount[i] > 0) { + if (statsPtr->lifetimeCount[i] > 0) { minSizeDecade = i; break; - } + } } for (i = 31; i >= 0; i--) { - if (statsPtr->lifetimeCount[i] > 0) { - maxSizeDecade = i; + if (statsPtr->lifetimeCount[i] > 0) { + maxSizeDecade = i; break; - } + } } sum = 0; for (i = minSizeDecade; i <= maxSizeDecade; i++) { decadeHigh = (1 << (i+1)) - 1; sum += statsPtr->lifetimeCount[i]; - fprintf(stdout, " %12.3f %8.0f%%\n", - decadeHigh / 1000.0, - (sum * 100.0) / statsPtr->numByteCodesFreed); + Tcl_AppendPrintfToObj(objPtr, " %12.3f %8.0f%%\n", + decadeHigh/1000.0, Percent(sum, statsPtr->numByteCodesFreed)); } /* * Instruction counts. */ - fprintf(stdout, "\nInstruction counts:\n"); - for (i = 0; i <= LAST_INST_OPCODE; i++) { - if (statsPtr->instructionCount[i]) { - fprintf(stdout, "%20s %8ld %6.1f%%\n", - tclInstructionTable[i].name, - statsPtr->instructionCount[i], - (statsPtr->instructionCount[i]*100.0) / numInstructions); - } - } - - fprintf(stdout, "\nInstructions NEVER executed:\n"); + Tcl_AppendPrintfToObj(objPtr, "\nInstruction counts:\n"); for (i = 0; i <= LAST_INST_OPCODE; i++) { - if (statsPtr->instructionCount[i] == 0) { - fprintf(stdout, "%20s\n", tclInstructionTable[i].name); - } + Tcl_AppendPrintfToObj(objPtr, "%20s %8ld ", + tclInstructionTable[i].name, statsPtr->instructionCount[i]); + if (statsPtr->instructionCount[i]) { + Tcl_AppendPrintfToObj(objPtr, "%6.1f%%\n", + Percent(statsPtr->instructionCount[i], numInstructions)); + } else { + Tcl_AppendPrintfToObj(objPtr, "0\n"); + } } #ifdef TCL_MEM_DEBUG - fprintf(stdout, "\nHeap Statistics:\n"); - TclDumpMemoryInfo(stdout); + Tcl_AppendPrintfToObj(objPtr, "\nHeap Statistics:\n"); + TclDumpMemoryInfo((ClientData) objPtr, 1); #endif - fprintf(stdout, "\n----------------------------------------------------------------\n"); + Tcl_AppendPrintfToObj(objPtr, "\n----------------------------------------------------------------\n"); + + if (objc == 1) { + Tcl_SetObjResult(interp, objPtr); + } else { + Tcl_Channel outChan; + char *str = Tcl_GetStringFromObj(objv[1], &length); + + if (length) { + if (strcmp(str, "stdout") == 0) { + outChan = Tcl_GetStdChannel(TCL_STDOUT); + } else if (strcmp(str, "stderr") == 0) { + outChan = Tcl_GetStdChannel(TCL_STDERR); + } else { + outChan = Tcl_OpenFileChannel(NULL, str, "w", 0664); + } + } else { + outChan = Tcl_GetStdChannel(TCL_STDOUT); + } + if (outChan != NULL) { + Tcl_WriteObj(outChan, objPtr); + } + } + Tcl_DecrRefCount(objPtr); return TCL_OK; } #endif /* TCL_COMPILE_STATS */ @@ -6534,15 +8541,15 @@ EvalStatsCmd(unused, interp, objc, objv) * * StringForResultCode -- * - * Procedure that returns a human-readable string representing a - * Tcl result code such as TCL_ERROR. + * Procedure that returns a human-readable string representing a Tcl + * result code such as TCL_ERROR. * * Results: - * If the result code is one of the standard Tcl return codes, the - * result is a string representing that code such as "TCL_ERROR". - * Otherwise, the result string is that code formatted as a - * sequence of decimal digit characters. Note that the resulting - * string must not be modified by the caller. + * If the result code is one of the standard Tcl return codes, the result + * is a string representing that code such as "TCL_ERROR". Otherwise, the + * result string is that code formatted as a sequence of decimal digit + * characters. Note that the resulting string must not be modified by the + * caller. * * Side effects: * None. @@ -6550,13 +8557,13 @@ EvalStatsCmd(unused, interp, objc, objv) *---------------------------------------------------------------------- */ -static CONST char * -StringForResultCode(result) - int result; /* The Tcl result code for which to - * generate a string. */ +static const char * +StringForResultCode( + int result) /* The Tcl result code for which to generate a + * string. */ { static char buf[TCL_INTEGER_SPACE]; - + if ((result >= TCL_OK) && (result <= TCL_CONTINUE)) { return resultStrings[result]; } @@ -6572,4 +8579,3 @@ StringForResultCode(result) * fill-column: 78 * End: */ - |