diff options
Diffstat (limited to 'generic/tclExecute.c')
-rw-r--r-- | generic/tclExecute.c | 10527 |
1 files changed, 10527 insertions, 0 deletions
diff --git a/generic/tclExecute.c b/generic/tclExecute.c new file mode 100644 index 0000000..1cfc030 --- /dev/null +++ b/generic/tclExecute.c @@ -0,0 +1,10527 @@ +/* + * tclExecute.c -- + * + * This file contains procedures that execute byte-compiled Tcl commands. + * + * Copyright (c) 1996-1997 Sun Microsystems, Inc. + * Copyright (c) 1998-2000 by Scriptics Corporation. + * Copyright (c) 2001 by Kevin B. Kenny. All rights reserved. + * Copyright (c) 2002-2010 by Miguel Sofer. + * Copyright (c) 2005-2007 by Donal K. Fellows. + * Copyright (c) 2007 Daniel A. Steffen <das@users.sourceforge.net> + * Copyright (c) 2006-2008 by Joe Mistachkin. All rights reserved. + * + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. + */ + +#include "tclInt.h" +#include "tclCompile.h" +#include "tclOOInt.h" +#include "tommath.h" +#include <math.h> +#include <assert.h> + +/* + * Hack to determine whether we may expect IEEE floating point. The hack is + * formally incorrect in that non-IEEE platforms might have the same precision + * and range, but VAX, IBM, and Cray do not; are there any other floating + * point units that we might care about? + */ + +#if (FLT_RADIX == 2) && (DBL_MANT_DIG == 53) && (DBL_MAX_EXP == 1024) +#define IEEE_FLOATING_POINT +#endif + +/* + * A counter that is used to work out when the bytecode engine should call + * Tcl_AsyncReady() to see whether there is a signal that needs handling, and + * other expensive periodic operations. + */ + +#ifndef ASYNC_CHECK_COUNT +# define ASYNC_CHECK_COUNT 64 +#endif /* !ASYNC_CHECK_COUNT */ + +/* + * Boolean flag indicating whether the Tcl bytecode interpreter has been + * initialized. + */ + +static int execInitialized = 0; +TCL_DECLARE_MUTEX(execMutex) + +static int cachedInExit = 0; + +#ifdef TCL_COMPILE_DEBUG +/* + * Variable that controls whether execution tracing is enabled and, if so, + * what level of tracing is desired: + * 0: no execution tracing + * 1: trace invocations of Tcl procs only + * 2: trace invocations of all (not compiled away) commands + * 3: display each instruction executed + * This variable is linked to the Tcl variable "tcl_traceExec". + */ + +int tclTraceExec = 0; +#endif + +/* + * Mapping from expression instruction opcodes to strings; used for error + * messages. Note that these entries must match the order and number of the + * expression opcodes (e.g., INST_LOR) in tclCompile.h. + * + * Does not include the string for INST_EXPON (and beyond), as that is + * disjoint for backward-compatability reasons. + */ + +static const char *const operatorStrings[] = { + "||", "&&", "|", "^", "&", "==", "!=", "<", ">", "<=", ">=", "<<", ">>", + "+", "-", "*", "/", "%", "+", "-", "~", "!" +}; + +/* + * Mapping from Tcl result codes to strings; used for error and debugging + * messages. + */ + +#ifdef TCL_COMPILE_DEBUG +static const char *const resultStrings[] = { + "TCL_OK", "TCL_ERROR", "TCL_RETURN", "TCL_BREAK", "TCL_CONTINUE" +}; +#endif + +/* + * These are used by evalstats to monitor object usage in Tcl. + */ + +#ifdef TCL_COMPILE_STATS +long tclObjsAlloced = 0; +long tclObjsFreed = 0; +long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS] = { 0, 0, 0, 0, 0 }; +#endif /* TCL_COMPILE_STATS */ + +/* + * Support pre-8.5 bytecodes unless specifically requested otherwise. + */ + +#ifndef TCL_SUPPORT_84_BYTECODE +#define TCL_SUPPORT_84_BYTECODE 1 +#endif + +#if TCL_SUPPORT_84_BYTECODE +/* + * We need to know the tclBuiltinFuncTable to support translation of pre-8.5 + * math functions to the namespace-based ::tcl::mathfunc::op in 8.5+. + */ + +typedef struct { + const char *name; /* Name of function. */ + int numArgs; /* Number of arguments for function. */ +} BuiltinFunc; + +/* + * Table describing the built-in math functions. Entries in this table are + * indexed by the values of the INST_CALL_BUILTIN_FUNC instruction's + * operand byte. + */ + +static BuiltinFunc const tclBuiltinFuncTable[] = { + {"acos", 1}, + {"asin", 1}, + {"atan", 1}, + {"atan2", 2}, + {"ceil", 1}, + {"cos", 1}, + {"cosh", 1}, + {"exp", 1}, + {"floor", 1}, + {"fmod", 2}, + {"hypot", 2}, + {"log", 1}, + {"log10", 1}, + {"pow", 2}, + {"sin", 1}, + {"sinh", 1}, + {"sqrt", 1}, + {"tan", 1}, + {"tanh", 1}, + {"abs", 1}, + {"double", 1}, + {"int", 1}, + {"rand", 0}, + {"round", 1}, + {"srand", 1}, + {"wide", 1}, + {NULL, 0}, +}; + +#define LAST_BUILTIN_FUNC 25 +#endif + +/* + * NR_TEBC + * Helpers for NR - non-recursive calls to TEBC + * Minimal data required to fully reconstruct the execution state. + */ + +typedef struct TEBCdata { + ByteCode *codePtr; /* Constant until the BC returns */ + /* -----------------------------------------*/ + ptrdiff_t *catchTop; /* These fields are used on return TO this */ + Tcl_Obj *auxObjList; /* this level: they record the state when a */ + CmdFrame cmdFrame; /* new codePtr was received for NR */ + /* execution. */ + void *stack[1]; /* Start of the actual combined catch and obj + * stacks; the struct will be expanded as + * necessary */ +} TEBCdata; + +#define TEBC_YIELD() \ + do { \ + esPtr->tosPtr = tosPtr; \ + TclNRAddCallback(interp, TEBCresume, \ + TD, pc, INT2PTR(cleanup), NULL); \ + } while (0) + +#define TEBC_DATA_DIG() \ + do { \ + tosPtr = esPtr->tosPtr; \ + } while (0) + +#define PUSH_TAUX_OBJ(objPtr) \ + do { \ + if (auxObjList) { \ + objPtr->length += auxObjList->length; \ + } \ + objPtr->internalRep.twoPtrValue.ptr1 = auxObjList; \ + auxObjList = objPtr; \ + } while (0) + +#define POP_TAUX_OBJ() \ + do { \ + tmpPtr = auxObjList; \ + auxObjList = tmpPtr->internalRep.twoPtrValue.ptr1; \ + Tcl_DecrRefCount(tmpPtr); \ + } while (0) + +/* + * These variable-access macros have to coincide with those in tclVar.c + */ + +#define VarHashGetValue(hPtr) \ + ((Var *) ((char *)hPtr - TclOffset(VarInHash, entry))) + +static inline Var * +VarHashCreateVar( + TclVarHashTable *tablePtr, + Tcl_Obj *key, + int *newPtr) +{ + Tcl_HashEntry *hPtr = Tcl_CreateHashEntry(&tablePtr->table, + key, newPtr); + + if (!hPtr) { + return NULL; + } + return VarHashGetValue(hPtr); +} + +#define VarHashFindVar(tablePtr, key) \ + VarHashCreateVar((tablePtr), (key), NULL) + +/* + * The new macro for ending an instruction; note that a reasonable C-optimiser + * will resolve all branches at compile time. (result) is always a constant; + * the macro NEXT_INST_F handles constant (nCleanup), NEXT_INST_V is resolved + * at runtime for variable (nCleanup). + * + * ARGUMENTS: + * pcAdjustment: how much to increment pc + * nCleanup: how many objects to remove from the stack + * resultHandling: 0 indicates no object should be pushed on the stack; + * otherwise, push objResultPtr. If (result < 0), objResultPtr already + * has the correct reference count. + * + * We use the new compile-time assertions to check that nCleanup is constant + * and within range. + */ + +/* Verify the stack depth, only when no expansion is in progress */ + +#ifdef TCL_COMPILE_DEBUG +#define CHECK_STACK() \ + do { \ + ValidatePcAndStackTop(codePtr, pc, CURR_DEPTH, \ + /*checkStack*/ !(starting || auxObjList)); \ + starting = 0; \ + } while (0) +#else +#define CHECK_STACK() +#endif + +#define NEXT_INST_F(pcAdjustment, nCleanup, resultHandling) \ + do { \ + TCL_CT_ASSERT((nCleanup >= 0) && (nCleanup <= 2)); \ + CHECK_STACK(); \ + if (nCleanup == 0) { \ + if (resultHandling != 0) { \ + if ((resultHandling) > 0) { \ + PUSH_OBJECT(objResultPtr); \ + } else { \ + *(++tosPtr) = objResultPtr; \ + } \ + } \ + pc += (pcAdjustment); \ + goto cleanup0; \ + } else if (resultHandling != 0) { \ + if ((resultHandling) > 0) { \ + Tcl_IncrRefCount(objResultPtr); \ + } \ + pc += (pcAdjustment); \ + switch (nCleanup) { \ + case 1: goto cleanup1_pushObjResultPtr; \ + case 2: goto cleanup2_pushObjResultPtr; \ + case 0: break; \ + } \ + } else { \ + pc += (pcAdjustment); \ + switch (nCleanup) { \ + case 1: goto cleanup1; \ + case 2: goto cleanup2; \ + case 0: break; \ + } \ + } \ + } while (0) + +#define NEXT_INST_V(pcAdjustment, nCleanup, resultHandling) \ + CHECK_STACK(); \ + do { \ + pc += (pcAdjustment); \ + cleanup = (nCleanup); \ + if (resultHandling) { \ + if ((resultHandling) > 0) { \ + Tcl_IncrRefCount(objResultPtr); \ + } \ + goto cleanupV_pushObjResultPtr; \ + } else { \ + goto cleanupV; \ + } \ + } while (0) + +#ifndef TCL_COMPILE_DEBUG +#define JUMP_PEEPHOLE_F(condition, pcAdjustment, cleanup) \ + do { \ + pc += (pcAdjustment); \ + switch (*pc) { \ + case INST_JUMP_FALSE1: \ + NEXT_INST_F(((condition)? 2 : TclGetInt1AtPtr(pc+1)), (cleanup), 0); \ + case INST_JUMP_TRUE1: \ + NEXT_INST_F(((condition)? TclGetInt1AtPtr(pc+1) : 2), (cleanup), 0); \ + case INST_JUMP_FALSE4: \ + NEXT_INST_F(((condition)? 5 : TclGetInt4AtPtr(pc+1)), (cleanup), 0); \ + case INST_JUMP_TRUE4: \ + NEXT_INST_F(((condition)? TclGetInt4AtPtr(pc+1) : 5), (cleanup), 0); \ + default: \ + if ((condition) < 0) { \ + TclNewIntObj(objResultPtr, -1); \ + } else { \ + objResultPtr = TCONST((condition) > 0); \ + } \ + NEXT_INST_F(0, (cleanup), 1); \ + } \ + } while (0) +#define JUMP_PEEPHOLE_V(condition, pcAdjustment, cleanup) \ + do { \ + pc += (pcAdjustment); \ + switch (*pc) { \ + case INST_JUMP_FALSE1: \ + NEXT_INST_V(((condition)? 2 : TclGetInt1AtPtr(pc+1)), (cleanup), 0); \ + case INST_JUMP_TRUE1: \ + NEXT_INST_V(((condition)? TclGetInt1AtPtr(pc+1) : 2), (cleanup), 0); \ + case INST_JUMP_FALSE4: \ + NEXT_INST_V(((condition)? 5 : TclGetInt4AtPtr(pc+1)), (cleanup), 0); \ + case INST_JUMP_TRUE4: \ + NEXT_INST_V(((condition)? TclGetInt4AtPtr(pc+1) : 5), (cleanup), 0); \ + default: \ + if ((condition) < 0) { \ + TclNewIntObj(objResultPtr, -1); \ + } else { \ + objResultPtr = TCONST((condition) > 0); \ + } \ + NEXT_INST_V(0, (cleanup), 1); \ + } \ + } while (0) +#else /* TCL_COMPILE_DEBUG */ +#define JUMP_PEEPHOLE_F(condition, pcAdjustment, cleanup) \ + do{ \ + if ((condition) < 0) { \ + TclNewIntObj(objResultPtr, -1); \ + } else { \ + objResultPtr = TCONST((condition) > 0); \ + } \ + NEXT_INST_F((pcAdjustment), (cleanup), 1); \ + } while (0) +#define JUMP_PEEPHOLE_V(condition, pcAdjustment, cleanup) \ + do{ \ + if ((condition) < 0) { \ + TclNewIntObj(objResultPtr, -1); \ + } else { \ + objResultPtr = TCONST((condition) > 0); \ + } \ + NEXT_INST_V((pcAdjustment), (cleanup), 1); \ + } while (0) +#endif + +/* + * Macros used to cache often-referenced Tcl evaluation stack information + * in local variables. Note that a DECACHE_STACK_INFO()-CACHE_STACK_INFO() + * pair must surround any call inside TclNRExecuteByteCode (and a few other + * procedures that use this scheme) that could result in a recursive call + * to TclNRExecuteByteCode. + */ + +#define CACHE_STACK_INFO() \ + checkInterp = 1 + +#define DECACHE_STACK_INFO() \ + esPtr->tosPtr = tosPtr + +/* + * Macros used to access items on the Tcl evaluation stack. PUSH_OBJECT + * increments the object's ref count since it makes the stack have another + * reference pointing to the object. However, POP_OBJECT does not decrement + * the ref count. This is because the stack may hold the only reference to the + * object, so the object would be destroyed if its ref count were decremented + * before the caller had a chance to, e.g., store it in a variable. It is the + * caller's responsibility to decrement the ref count when it is finished with + * an object. + * + * WARNING! It is essential that objPtr only appear once in the PUSH_OBJECT + * macro. The actual parameter might be an expression with side effects, and + * this ensures that it will be executed only once. + */ + +#define PUSH_OBJECT(objPtr) \ + Tcl_IncrRefCount(*(++tosPtr) = (objPtr)) + +#define POP_OBJECT() *(tosPtr--) + +#define OBJ_AT_TOS *tosPtr + +#define OBJ_UNDER_TOS *(tosPtr-1) + +#define OBJ_AT_DEPTH(n) *(tosPtr-(n)) + +#define CURR_DEPTH ((ptrdiff_t) (tosPtr - initTosPtr)) + +#define STACK_BASE(esPtr) ((esPtr)->stackWords - 1) + +/* + * Macros used to trace instruction execution. The macros TRACE, + * TRACE_WITH_OBJ, and O2S are only used inside TclNRExecuteByteCode. O2S is + * only used in TRACE* calls to get a string from an object. + */ + +#ifdef TCL_COMPILE_DEBUG +# define TRACE(a) \ + while (traceInstructions) { \ + fprintf(stdout, "%2d: %2d (%u) %s ", iPtr->numLevels, \ + (int) CURR_DEPTH, \ + (unsigned) (pc - codePtr->codeStart), \ + GetOpcodeName(pc)); \ + printf a; \ + break; \ + } +# define TRACE_APPEND(a) \ + while (traceInstructions) { \ + printf a; \ + break; \ + } +# define TRACE_ERROR(interp) \ + TRACE_APPEND(("ERROR: %.30s\n", O2S(Tcl_GetObjResult(interp)))); +# define TRACE_WITH_OBJ(a, objPtr) \ + while (traceInstructions) { \ + fprintf(stdout, "%2d: %2d (%u) %s ", iPtr->numLevels, \ + (int) CURR_DEPTH, \ + (unsigned) (pc - codePtr->codeStart), \ + GetOpcodeName(pc)); \ + printf a; \ + TclPrintObject(stdout, objPtr, 30); \ + fprintf(stdout, "\n"); \ + break; \ + } +# define O2S(objPtr) \ + (objPtr ? TclGetString(objPtr) : "") +#else /* !TCL_COMPILE_DEBUG */ +# define TRACE(a) +# define TRACE_APPEND(a) +# define TRACE_ERROR(interp) +# define TRACE_WITH_OBJ(a, objPtr) +# define O2S(objPtr) +#endif /* TCL_COMPILE_DEBUG */ + +/* + * DTrace instruction probe macros. + */ + +#define TCL_DTRACE_INST_NEXT() \ + do { \ + if (TCL_DTRACE_INST_DONE_ENABLED()) { \ + if (curInstName) { \ + TCL_DTRACE_INST_DONE(curInstName, (int) CURR_DEPTH, \ + tosPtr); \ + } \ + curInstName = tclInstructionTable[*pc].name; \ + if (TCL_DTRACE_INST_START_ENABLED()) { \ + TCL_DTRACE_INST_START(curInstName, (int) CURR_DEPTH, \ + tosPtr); \ + } \ + } else if (TCL_DTRACE_INST_START_ENABLED()) { \ + TCL_DTRACE_INST_START(tclInstructionTable[*pc].name, \ + (int) CURR_DEPTH, tosPtr); \ + } \ + } while (0) +#define TCL_DTRACE_INST_LAST() \ + do { \ + if (TCL_DTRACE_INST_DONE_ENABLED() && curInstName) { \ + TCL_DTRACE_INST_DONE(curInstName, (int) CURR_DEPTH, tosPtr);\ + } \ + } while (0) + +/* + * Macro used in this file to save a function call for common uses of + * TclGetNumberFromObj(). The ANSI C "prototype" is: + * + * MODULE_SCOPE int GetNumberFromObj(Tcl_Interp *interp, Tcl_Obj *objPtr, + * ClientData *ptrPtr, int *tPtr); + */ + +#ifdef TCL_WIDE_INT_IS_LONG +#define GetNumberFromObj(interp, objPtr, ptrPtr, tPtr) \ + (((objPtr)->typePtr == &tclIntType) \ + ? (*(tPtr) = TCL_NUMBER_LONG, \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.longValue)), TCL_OK) : \ + ((objPtr)->typePtr == &tclDoubleType) \ + ? (((TclIsNaN((objPtr)->internalRep.doubleValue)) \ + ? (*(tPtr) = TCL_NUMBER_NAN) \ + : (*(tPtr) = TCL_NUMBER_DOUBLE)), \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.doubleValue)), TCL_OK) : \ + ((((objPtr)->typePtr == NULL) && ((objPtr)->bytes == NULL)) || \ + (((objPtr)->bytes != NULL) && ((objPtr)->length == 0))) \ + ? (*(tPtr) = TCL_NUMBER_LONG),TCL_ERROR : \ + TclGetNumberFromObj((interp), (objPtr), (ptrPtr), (tPtr))) +#else /* !TCL_WIDE_INT_IS_LONG */ +#define GetNumberFromObj(interp, objPtr, ptrPtr, tPtr) \ + (((objPtr)->typePtr == &tclIntType) \ + ? (*(tPtr) = TCL_NUMBER_LONG, \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.longValue)), TCL_OK) : \ + ((objPtr)->typePtr == &tclWideIntType) \ + ? (*(tPtr) = TCL_NUMBER_WIDE, \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.wideValue)), TCL_OK) : \ + ((objPtr)->typePtr == &tclDoubleType) \ + ? (((TclIsNaN((objPtr)->internalRep.doubleValue)) \ + ? (*(tPtr) = TCL_NUMBER_NAN) \ + : (*(tPtr) = TCL_NUMBER_DOUBLE)), \ + *(ptrPtr) = (ClientData) \ + (&((objPtr)->internalRep.doubleValue)), TCL_OK) : \ + ((((objPtr)->typePtr == NULL) && ((objPtr)->bytes == NULL)) || \ + (((objPtr)->bytes != NULL) && ((objPtr)->length == 0))) \ + ? (*(tPtr) = TCL_NUMBER_LONG),TCL_ERROR : \ + TclGetNumberFromObj((interp), (objPtr), (ptrPtr), (tPtr))) +#endif /* TCL_WIDE_INT_IS_LONG */ + +/* + * Macro used in this file to save a function call for common uses of + * Tcl_GetBooleanFromObj(). The ANSI C "prototype" is: + * + * MODULE_SCOPE int TclGetBooleanFromObj(Tcl_Interp *interp, Tcl_Obj *objPtr, + * int *boolPtr); + */ + +#define TclGetBooleanFromObj(interp, objPtr, boolPtr) \ + ((((objPtr)->typePtr == &tclIntType) \ + || ((objPtr)->typePtr == &tclBooleanType)) \ + ? (*(boolPtr) = ((objPtr)->internalRep.longValue!=0), TCL_OK) \ + : Tcl_GetBooleanFromObj((interp), (objPtr), (boolPtr))) + +/* + * Macro used to make the check for type overflow more mnemonic. This works by + * comparing sign bits; the rest of the word is irrelevant. The ANSI C + * "prototype" (where inttype_t is any integer type) is: + * + * MODULE_SCOPE int Overflowing(inttype_t a, inttype_t b, inttype_t sum); + * + * Check first the condition most likely to fail in usual code (at least for + * usage in [incr]: do the first summand and the sum have != signs? + */ + +#define Overflowing(a,b,sum) ((((a)^(sum)) < 0) && (((a)^(b)) >= 0)) + +/* + * Macro for checking whether the type is NaN, used when we're thinking about + * throwing an error for supplying a non-number number. + */ + +#ifndef ACCEPT_NAN +#define IsErroringNaNType(type) ((type) == TCL_NUMBER_NAN) +#else +#define IsErroringNaNType(type) 0 +#endif + +/* + * Auxiliary tables used to compute powers of small integers. + */ + +#if (LONG_MAX == 0x7fffffff) + +/* + * Maximum base that, when raised to powers 2, 3, ... 8, fits in a 32-bit + * signed integer. + */ + +static const long MaxBase32[] = {46340, 1290, 215, 73, 35, 21, 14}; +static const size_t MaxBase32Size = sizeof(MaxBase32)/sizeof(long); + +/* + * Table giving 3, 4, ..., 11, raised to the powers 9, 10, ..., as far as they + * fit in a 32-bit signed integer. Exp32Index[i] gives the starting index of + * powers of i+3; Exp32Value[i] gives the corresponding powers. + */ + +static const unsigned short Exp32Index[] = { + 0, 11, 18, 23, 26, 29, 31, 32, 33 +}; +static const size_t Exp32IndexSize = + sizeof(Exp32Index) / sizeof(unsigned short); +static const long Exp32Value[] = { + 19683, 59049, 177147, 531441, 1594323, 4782969, 14348907, 43046721, + 129140163, 387420489, 1162261467, 262144, 1048576, 4194304, + 16777216, 67108864, 268435456, 1073741824, 1953125, 9765625, + 48828125, 244140625, 1220703125, 10077696, 60466176, 362797056, + 40353607, 282475249, 1977326743, 134217728, 1073741824, 387420489, + 1000000000 +}; +static const size_t Exp32ValueSize = sizeof(Exp32Value)/sizeof(long); +#endif /* LONG_MAX == 0x7fffffff -- 32 bit machine */ + +#if (LONG_MAX > 0x7fffffff) || !defined(TCL_WIDE_INT_IS_LONG) + +/* + * Maximum base that, when raised to powers 2, 3, ..., 16, fits in a + * Tcl_WideInt. + */ + +static const Tcl_WideInt MaxBase64[] = { + (Tcl_WideInt)46340*65536+62259, /* 3037000499 == isqrt(2**63-1) */ + (Tcl_WideInt)2097151, (Tcl_WideInt)55108, (Tcl_WideInt)6208, + (Tcl_WideInt)1448, (Tcl_WideInt)511, (Tcl_WideInt)234, (Tcl_WideInt)127, + (Tcl_WideInt)78, (Tcl_WideInt)52, (Tcl_WideInt)38, (Tcl_WideInt)28, + (Tcl_WideInt)22, (Tcl_WideInt)18, (Tcl_WideInt)15 +}; +static const size_t MaxBase64Size = sizeof(MaxBase64)/sizeof(Tcl_WideInt); + +/* + * Table giving 3, 4, ..., 13 raised to powers greater than 16 when the + * results fit in a 64-bit signed integer. + */ + +static const unsigned short Exp64Index[] = { + 0, 23, 38, 49, 57, 63, 67, 70, 72, 74, 75, 76 +}; +static const size_t Exp64IndexSize = + sizeof(Exp64Index) / sizeof(unsigned short); +static const Tcl_WideInt Exp64Value[] = { + (Tcl_WideInt)243*243*243*3*3, + (Tcl_WideInt)243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*3*3*3*3, + (Tcl_WideInt)243*243*243*243, + (Tcl_WideInt)243*243*243*243*3, + (Tcl_WideInt)243*243*243*243*3*3, + (Tcl_WideInt)243*243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*243*3*3*3*3, + (Tcl_WideInt)243*243*243*243*243, + (Tcl_WideInt)243*243*243*243*243*3, + (Tcl_WideInt)243*243*243*243*243*3*3, + (Tcl_WideInt)243*243*243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*243*243*3*3*3*3, + (Tcl_WideInt)243*243*243*243*243*243, + (Tcl_WideInt)243*243*243*243*243*243*3, + (Tcl_WideInt)243*243*243*243*243*243*3*3, + (Tcl_WideInt)243*243*243*243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*243*243*243*3*3*3*3, + (Tcl_WideInt)243*243*243*243*243*243*243, + (Tcl_WideInt)243*243*243*243*243*243*243*3, + (Tcl_WideInt)243*243*243*243*243*243*243*3*3, + (Tcl_WideInt)243*243*243*243*243*243*243*3*3*3, + (Tcl_WideInt)243*243*243*243*243*243*243*3*3*3*3, + (Tcl_WideInt)1024*1024*1024*4*4, + (Tcl_WideInt)1024*1024*1024*4*4*4, + (Tcl_WideInt)1024*1024*1024*4*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024, + (Tcl_WideInt)1024*1024*1024*1024*4, + (Tcl_WideInt)1024*1024*1024*1024*4*4, + (Tcl_WideInt)1024*1024*1024*1024*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024*4*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024*1024, + (Tcl_WideInt)1024*1024*1024*1024*1024*4, + (Tcl_WideInt)1024*1024*1024*1024*1024*4*4, + (Tcl_WideInt)1024*1024*1024*1024*1024*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024*1024*4*4*4*4, + (Tcl_WideInt)1024*1024*1024*1024*1024*1024, + (Tcl_WideInt)1024*1024*1024*1024*1024*1024*4, + (Tcl_WideInt)3125*3125*3125*5*5, + (Tcl_WideInt)3125*3125*3125*5*5*5, + (Tcl_WideInt)3125*3125*3125*5*5*5*5, + (Tcl_WideInt)3125*3125*3125*3125, + (Tcl_WideInt)3125*3125*3125*3125*5, + (Tcl_WideInt)3125*3125*3125*3125*5*5, + (Tcl_WideInt)3125*3125*3125*3125*5*5*5, + (Tcl_WideInt)3125*3125*3125*3125*5*5*5*5, + (Tcl_WideInt)3125*3125*3125*3125*3125, + (Tcl_WideInt)3125*3125*3125*3125*3125*5, + (Tcl_WideInt)3125*3125*3125*3125*3125*5*5, + (Tcl_WideInt)7776*7776*7776*6*6, + (Tcl_WideInt)7776*7776*7776*6*6*6, + (Tcl_WideInt)7776*7776*7776*6*6*6*6, + (Tcl_WideInt)7776*7776*7776*7776, + (Tcl_WideInt)7776*7776*7776*7776*6, + (Tcl_WideInt)7776*7776*7776*7776*6*6, + (Tcl_WideInt)7776*7776*7776*7776*6*6*6, + (Tcl_WideInt)7776*7776*7776*7776*6*6*6*6, + (Tcl_WideInt)16807*16807*16807*7*7, + (Tcl_WideInt)16807*16807*16807*7*7*7, + (Tcl_WideInt)16807*16807*16807*7*7*7*7, + (Tcl_WideInt)16807*16807*16807*16807, + (Tcl_WideInt)16807*16807*16807*16807*7, + (Tcl_WideInt)16807*16807*16807*16807*7*7, + (Tcl_WideInt)32768*32768*32768*8*8, + (Tcl_WideInt)32768*32768*32768*8*8*8, + (Tcl_WideInt)32768*32768*32768*8*8*8*8, + (Tcl_WideInt)32768*32768*32768*32768, + (Tcl_WideInt)59049*59049*59049*9*9, + (Tcl_WideInt)59049*59049*59049*9*9*9, + (Tcl_WideInt)59049*59049*59049*9*9*9*9, + (Tcl_WideInt)100000*100000*100000*10*10, + (Tcl_WideInt)100000*100000*100000*10*10*10, + (Tcl_WideInt)161051*161051*161051*11*11, + (Tcl_WideInt)161051*161051*161051*11*11*11, + (Tcl_WideInt)248832*248832*248832*12*12, + (Tcl_WideInt)371293*371293*371293*13*13 +}; +static const size_t Exp64ValueSize = sizeof(Exp64Value) / sizeof(Tcl_WideInt); +#endif /* (LONG_MAX > 0x7fffffff) || !defined(TCL_WIDE_INT_IS_LONG) */ + +/* + * Markers for ExecuteExtendedBinaryMathOp. + */ + +#define DIVIDED_BY_ZERO ((Tcl_Obj *) -1) +#define EXPONENT_OF_ZERO ((Tcl_Obj *) -2) +#define GENERAL_ARITHMETIC_ERROR ((Tcl_Obj *) -3) + +/* + * Declarations for local procedures to this file: + */ + +#ifdef TCL_COMPILE_STATS +static int EvalStatsCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +#endif /* TCL_COMPILE_STATS */ +#ifdef TCL_COMPILE_DEBUG +static const char * GetOpcodeName(const unsigned char *pc); +static void PrintByteCodeInfo(ByteCode *codePtr); +static const char * StringForResultCode(int result); +static void ValidatePcAndStackTop(ByteCode *codePtr, + const unsigned char *pc, int stackTop, + int checkStack); +#endif /* TCL_COMPILE_DEBUG */ +static ByteCode * CompileExprObj(Tcl_Interp *interp, Tcl_Obj *objPtr); +static void DeleteExecStack(ExecStack *esPtr); +static void DupExprCodeInternalRep(Tcl_Obj *srcPtr, + Tcl_Obj *copyPtr); +MODULE_SCOPE int TclCompareTwoNumbers(Tcl_Obj *valuePtr, + Tcl_Obj *value2Ptr); +static Tcl_Obj * ExecuteExtendedBinaryMathOp(Tcl_Interp *interp, + int opcode, Tcl_Obj **constants, + Tcl_Obj *valuePtr, Tcl_Obj *value2Ptr); +static Tcl_Obj * ExecuteExtendedUnaryMathOp(int opcode, + Tcl_Obj *valuePtr); +static void FreeExprCodeInternalRep(Tcl_Obj *objPtr); +static ExceptionRange * GetExceptRangeForPc(const unsigned char *pc, + int searchMode, ByteCode *codePtr); +static const char * GetSrcInfoForPc(const unsigned char *pc, + ByteCode *codePtr, int *lengthPtr, + const unsigned char **pcBeg, int *cmdIdxPtr); +static Tcl_Obj ** GrowEvaluationStack(ExecEnv *eePtr, int growth, + int move); +static void IllegalExprOperandType(Tcl_Interp *interp, + const unsigned char *pc, Tcl_Obj *opndPtr); +static void InitByteCodeExecution(Tcl_Interp *interp); +static inline int wordSkip(void *ptr); +static void ReleaseDictIterator(Tcl_Obj *objPtr); +/* Useful elsewhere, make available in tclInt.h or stubs? */ +static Tcl_Obj ** StackAllocWords(Tcl_Interp *interp, int numWords); +static Tcl_Obj ** StackReallocWords(Tcl_Interp *interp, int numWords); +static Tcl_NRPostProc CopyCallback; +static Tcl_NRPostProc ExprObjCallback; +static Tcl_NRPostProc FinalizeOONext; +static Tcl_NRPostProc FinalizeOONextFilter; +static Tcl_NRPostProc TEBCresume; + +/* + * The structure below defines a bytecode Tcl object type to hold the + * compiled bytecode for Tcl expressions. + */ + +static const Tcl_ObjType exprCodeType = { + "exprcode", + FreeExprCodeInternalRep, /* freeIntRepProc */ + DupExprCodeInternalRep, /* dupIntRepProc */ + NULL, /* updateStringProc */ + NULL /* setFromAnyProc */ +}; + +/* + * Custom object type only used in this file; values of its type should never + * be seen by user scripts. + */ + +static const Tcl_ObjType dictIteratorType = { + "dictIterator", + ReleaseDictIterator, + NULL, NULL, NULL +}; + +/* + *---------------------------------------------------------------------- + * + * ReleaseDictIterator -- + * + * This takes apart a dictionary iterator that is stored in the given Tcl + * object. + * + * Results: + * None. + * + * Side effects: + * Deallocates memory, marks the object as being untyped. + * + *---------------------------------------------------------------------- + */ + +static void +ReleaseDictIterator( + Tcl_Obj *objPtr) +{ + Tcl_DictSearch *searchPtr; + Tcl_Obj *dictPtr; + + /* + * First kill the search, and then release the reference to the dictionary + * that we were holding. + */ + + searchPtr = objPtr->internalRep.twoPtrValue.ptr1; + Tcl_DictObjDone(searchPtr); + ckfree(searchPtr); + + dictPtr = objPtr->internalRep.twoPtrValue.ptr2; + TclDecrRefCount(dictPtr); + + objPtr->typePtr = NULL; +} + +/* + *---------------------------------------------------------------------- + * + * InitByteCodeExecution -- + * + * This procedure is called once to initialize the Tcl bytecode + * interpreter. + * + * Results: + * None. + * + * Side effects: + * This procedure initializes the array of instruction names. If + * compiling with the TCL_COMPILE_STATS flag, it initializes the array + * that counts the executions of each instruction and it creates the + * "evalstats" command. It also establishes the link between the Tcl + * "tcl_traceExec" and C "tclTraceExec" variables. + * + *---------------------------------------------------------------------- + */ + +static void +InitByteCodeExecution( + Tcl_Interp *interp) /* Interpreter for which the Tcl variable + * "tcl_traceExec" is linked to control + * instruction tracing. */ +{ +#ifdef TCL_COMPILE_DEBUG + if (Tcl_LinkVar(interp, "tcl_traceExec", (char *) &tclTraceExec, + TCL_LINK_INT) != TCL_OK) { + Tcl_Panic("InitByteCodeExecution: can't create link for tcl_traceExec variable"); + } +#endif +#ifdef TCL_COMPILE_STATS + Tcl_CreateObjCommand(interp, "evalstats", EvalStatsCmd, NULL, NULL); +#endif /* TCL_COMPILE_STATS */ +} + +/* + *---------------------------------------------------------------------- + * + * TclCreateExecEnv -- + * + * This procedure creates a new execution environment for Tcl bytecode + * execution. An ExecEnv points to a Tcl evaluation stack. An ExecEnv is + * typically created once for each Tcl interpreter (Interp structure) and + * recursively passed to TclNRExecuteByteCode to execute ByteCode sequences + * for nested commands. + * + * Results: + * A newly allocated ExecEnv is returned. This points to an empty + * evaluation stack of the standard initial size. + * + * Side effects: + * The bytecode interpreter is also initialized here, as this procedure + * will be called before any call to TclNRExecuteByteCode. + * + *---------------------------------------------------------------------- + */ + +ExecEnv * +TclCreateExecEnv( + Tcl_Interp *interp, /* Interpreter for which the execution + * environment is being created. */ + int size) /* The initial stack size, in number of words + * [sizeof(Tcl_Obj*)] */ +{ + ExecEnv *eePtr = ckalloc(sizeof(ExecEnv)); + ExecStack *esPtr = ckalloc(sizeof(ExecStack) + + (size_t) (size-1) * sizeof(Tcl_Obj *)); + + eePtr->execStackPtr = esPtr; + TclNewBooleanObj(eePtr->constants[0], 0); + Tcl_IncrRefCount(eePtr->constants[0]); + TclNewBooleanObj(eePtr->constants[1], 1); + Tcl_IncrRefCount(eePtr->constants[1]); + eePtr->interp = interp; + eePtr->callbackPtr = NULL; + eePtr->corPtr = NULL; + eePtr->rewind = 0; + + esPtr->prevPtr = NULL; + esPtr->nextPtr = NULL; + esPtr->markerPtr = NULL; + esPtr->endPtr = &esPtr->stackWords[size-1]; + esPtr->tosPtr = STACK_BASE(esPtr); + + Tcl_MutexLock(&execMutex); + if (!execInitialized) { + InitByteCodeExecution(interp); + execInitialized = 1; + } + Tcl_MutexUnlock(&execMutex); + + return eePtr; +} + +/* + *---------------------------------------------------------------------- + * + * TclDeleteExecEnv -- + * + * Frees the storage for an ExecEnv. + * + * Results: + * None. + * + * Side effects: + * Storage for an ExecEnv and its contained storage (e.g. the evaluation + * stack) is freed. + * + *---------------------------------------------------------------------- + */ + +static void +DeleteExecStack( + ExecStack *esPtr) +{ + if (esPtr->markerPtr && !cachedInExit) { + Tcl_Panic("freeing an execStack which is still in use"); + } + + if (esPtr->prevPtr) { + esPtr->prevPtr->nextPtr = esPtr->nextPtr; + } + if (esPtr->nextPtr) { + esPtr->nextPtr->prevPtr = esPtr->prevPtr; + } + ckfree(esPtr); +} + +void +TclDeleteExecEnv( + ExecEnv *eePtr) /* Execution environment to free. */ +{ + ExecStack *esPtr = eePtr->execStackPtr, *tmpPtr; + + cachedInExit = TclInExit(); + + /* + * Delete all stacks in this exec env. + */ + + while (esPtr->nextPtr) { + esPtr = esPtr->nextPtr; + } + while (esPtr) { + tmpPtr = esPtr; + esPtr = tmpPtr->prevPtr; + DeleteExecStack(tmpPtr); + } + + TclDecrRefCount(eePtr->constants[0]); + TclDecrRefCount(eePtr->constants[1]); + if (eePtr->callbackPtr && !cachedInExit) { + Tcl_Panic("Deleting execEnv with pending TEOV callbacks!"); + } + if (eePtr->corPtr && !cachedInExit) { + Tcl_Panic("Deleting execEnv with existing coroutine"); + } + ckfree(eePtr); +} + +/* + *---------------------------------------------------------------------- + * + * TclFinalizeExecution -- + * + * Finalizes the execution environment setup so that it can be later + * reinitialized. + * + * Results: + * None. + * + * Side effects: + * After this call, the next time TclCreateExecEnv will be called it will + * call InitByteCodeExecution. + * + *---------------------------------------------------------------------- + */ + +void +TclFinalizeExecution(void) +{ + Tcl_MutexLock(&execMutex); + execInitialized = 0; + Tcl_MutexUnlock(&execMutex); +} + +/* + * Auxiliary code to insure that GrowEvaluationStack always returns correctly + * aligned memory. + * + * WALLOCALIGN represents the alignment reqs in words, just as TCL_ALLOCALIGN + * represents the reqs in bytes. This assumes that TCL_ALLOCALIGN is a + * multiple of the wordsize 'sizeof(Tcl_Obj *)'. + */ + +#define WALLOCALIGN \ + (TCL_ALLOCALIGN/sizeof(Tcl_Obj *)) + +/* + * wordSkip computes how many words have to be skipped until the next aligned + * word. Note that we are only interested in the low order bits of ptr, so + * that any possible information loss in PTR2INT is of no consequence. + */ + +static inline int +wordSkip( + void *ptr) +{ + int mask = TCL_ALLOCALIGN-1; + int base = PTR2INT(ptr) & mask; + return (TCL_ALLOCALIGN - base)/sizeof(Tcl_Obj *); +} + +/* + * Given a marker, compute where the following aligned memory starts. + */ + +#define MEMSTART(markerPtr) \ + ((markerPtr) + wordSkip(markerPtr)) + +/* + *---------------------------------------------------------------------- + * + * GrowEvaluationStack -- + * + * This procedure grows a Tcl evaluation stack stored in an ExecEnv, + * copying over the words since the last mark if so requested. A mark is + * set at the beginning of the new area when no copying is requested. + * + * Results: + * Returns a pointer to the first usable word in the (possibly) grown + * stack. + * + * Side effects: + * The size of the evaluation stack may be grown, a marker is set + * + *---------------------------------------------------------------------- + */ + +static Tcl_Obj ** +GrowEvaluationStack( + ExecEnv *eePtr, /* Points to the ExecEnv with an evaluation + * stack to enlarge. */ + int growth, /* How much larger than the current used + * size. */ + int move) /* 1 if move words since last marker. */ +{ + ExecStack *esPtr = eePtr->execStackPtr, *oldPtr = NULL; + int newBytes, newElems, currElems; + int needed = growth - (esPtr->endPtr - esPtr->tosPtr); + Tcl_Obj **markerPtr = esPtr->markerPtr, **memStart; + int moveWords = 0; + + if (move) { + if (!markerPtr) { + Tcl_Panic("STACK: Reallocating with no previous alloc"); + } + if (needed <= 0) { + return MEMSTART(markerPtr); + } + } else { +#ifndef PURIFY + Tcl_Obj **tmpMarkerPtr = esPtr->tosPtr + 1; + int offset = wordSkip(tmpMarkerPtr); + + if (needed + offset < 0) { + /* + * Put a marker pointing to the previous marker in this stack, and + * store it in esPtr as the current marker. Return a pointer to + * the start of aligned memory. + */ + + esPtr->markerPtr = tmpMarkerPtr; + memStart = tmpMarkerPtr + offset; + esPtr->tosPtr = memStart - 1; + *esPtr->markerPtr = (Tcl_Obj *) markerPtr; + return memStart; + } +#endif + } + + /* + * Reset move to hold the number of words to be moved to new stack (if + * any) and growth to hold the complete stack requirements: add one for + * the marker, (WALLOCALIGN-1) for the maximal possible offset. + */ + + if (move) { + moveWords = esPtr->tosPtr - MEMSTART(markerPtr) + 1; + } + needed = growth + moveWords + WALLOCALIGN; + + + /* + * Check if there is enough room in the next stack (if there is one, it + * should be both empty and the last one!) + */ + + if (esPtr->nextPtr) { + oldPtr = esPtr; + esPtr = oldPtr->nextPtr; + currElems = esPtr->endPtr - STACK_BASE(esPtr); + if (esPtr->markerPtr || (esPtr->tosPtr != STACK_BASE(esPtr))) { + Tcl_Panic("STACK: Stack after current is in use"); + } + if (esPtr->nextPtr) { + Tcl_Panic("STACK: Stack after current is not last"); + } + if (needed <= currElems) { + goto newStackReady; + } + DeleteExecStack(esPtr); + esPtr = oldPtr; + } else { + currElems = esPtr->endPtr - STACK_BASE(esPtr); + } + + /* + * We need to allocate a new stack! It needs to store 'growth' words, + * including the elements to be copied over and the new marker. + */ + +#ifndef PURIFY + newElems = 2*currElems; + while (needed > newElems) { + newElems *= 2; + } +#else + newElems = needed; +#endif + + newBytes = sizeof(ExecStack) + (newElems-1) * sizeof(Tcl_Obj *); + + oldPtr = esPtr; + esPtr = ckalloc(newBytes); + + oldPtr->nextPtr = esPtr; + esPtr->prevPtr = oldPtr; + esPtr->nextPtr = NULL; + esPtr->endPtr = &esPtr->stackWords[newElems-1]; + + newStackReady: + eePtr->execStackPtr = esPtr; + + /* + * Store a NULL marker at the beginning of the stack, to indicate that + * this is the first marker in this stack and that rewinding to here + * should actually be a return to the previous stack. + */ + + esPtr->stackWords[0] = NULL; + esPtr->markerPtr = &esPtr->stackWords[0]; + memStart = MEMSTART(esPtr->markerPtr); + esPtr->tosPtr = memStart - 1; + + if (move) { + memcpy(memStart, MEMSTART(markerPtr), moveWords*sizeof(Tcl_Obj *)); + esPtr->tosPtr += moveWords; + oldPtr->markerPtr = (Tcl_Obj **) *markerPtr; + oldPtr->tosPtr = markerPtr-1; + } + + /* + * Free the old stack if it is now unused. + */ + + if (!oldPtr->markerPtr) { + DeleteExecStack(oldPtr); + } + + return memStart; +} + +/* + *-------------------------------------------------------------- + * + * TclStackAlloc, TclStackRealloc, TclStackFree -- + * + * Allocate memory from the execution stack; it has to be returned later + * with a call to TclStackFree. + * + * Results: + * A pointer to the first byte allocated, or panics if the allocation did + * not succeed. + * + * Side effects: + * The execution stack may be grown. + * + *-------------------------------------------------------------- + */ + +static Tcl_Obj ** +StackAllocWords( + Tcl_Interp *interp, + int numWords) +{ + /* + * Note that GrowEvaluationStack sets a marker in the stack. This marker + * is read when rewinding, e.g., by TclStackFree. + */ + + Interp *iPtr = (Interp *) interp; + ExecEnv *eePtr = iPtr->execEnvPtr; + Tcl_Obj **resPtr = GrowEvaluationStack(eePtr, numWords, 0); + + eePtr->execStackPtr->tosPtr += numWords; + return resPtr; +} + +static Tcl_Obj ** +StackReallocWords( + Tcl_Interp *interp, + int numWords) +{ + Interp *iPtr = (Interp *) interp; + ExecEnv *eePtr = iPtr->execEnvPtr; + Tcl_Obj **resPtr = GrowEvaluationStack(eePtr, numWords, 1); + + eePtr->execStackPtr->tosPtr += numWords; + return resPtr; +} + +void +TclStackFree( + Tcl_Interp *interp, + void *freePtr) +{ + Interp *iPtr = (Interp *) interp; + ExecEnv *eePtr; + ExecStack *esPtr; + Tcl_Obj **markerPtr, *marker; + + if (iPtr == NULL || iPtr->execEnvPtr == NULL) { + ckfree(freePtr); + return; + } + + /* + * Rewind the stack to the previous marker position. The current marker, + * as set in the last call to GrowEvaluationStack, contains a pointer to + * the previous marker. + */ + + eePtr = iPtr->execEnvPtr; + esPtr = eePtr->execStackPtr; + markerPtr = esPtr->markerPtr; + marker = *markerPtr; + + if ((freePtr != NULL) && (MEMSTART(markerPtr) != (Tcl_Obj **)freePtr)) { + Tcl_Panic("TclStackFree: incorrect freePtr (%p != %p). Call out of sequence?", + freePtr, MEMSTART(markerPtr)); + } + + esPtr->tosPtr = markerPtr - 1; + esPtr->markerPtr = (Tcl_Obj **) marker; + if (marker) { + return; + } + + /* + * Return to previous active stack. Note that repeated expansions or + * reallocs could have generated several unused intervening stacks: free + * them too. + */ + + while (esPtr->nextPtr) { + esPtr = esPtr->nextPtr; + } + esPtr->tosPtr = STACK_BASE(esPtr); + while (esPtr->prevPtr) { + ExecStack *tmpPtr = esPtr->prevPtr; + if (tmpPtr->tosPtr == STACK_BASE(tmpPtr)) { + DeleteExecStack(tmpPtr); + } else { + break; + } + } + if (esPtr->prevPtr) { + eePtr->execStackPtr = esPtr->prevPtr; +#ifdef PURIFY + eePtr->execStackPtr->nextPtr = NULL; + DeleteExecStack(esPtr); +#endif + } else { + eePtr->execStackPtr = esPtr; + } +} + +void * +TclStackAlloc( + Tcl_Interp *interp, + int numBytes) +{ + Interp *iPtr = (Interp *) interp; + int numWords = (numBytes + (sizeof(Tcl_Obj *) - 1))/sizeof(Tcl_Obj *); + + if (iPtr == NULL || iPtr->execEnvPtr == NULL) { + return (void *) ckalloc(numBytes); + } + + return (void *) StackAllocWords(interp, numWords); +} + +void * +TclStackRealloc( + Tcl_Interp *interp, + void *ptr, + int numBytes) +{ + Interp *iPtr = (Interp *) interp; + ExecEnv *eePtr; + ExecStack *esPtr; + Tcl_Obj **markerPtr; + int numWords; + + if (iPtr == NULL || iPtr->execEnvPtr == NULL) { + return (void *) ckrealloc((char *) ptr, numBytes); + } + + eePtr = iPtr->execEnvPtr; + esPtr = eePtr->execStackPtr; + markerPtr = esPtr->markerPtr; + + if (MEMSTART(markerPtr) != (Tcl_Obj **)ptr) { + Tcl_Panic("TclStackRealloc: incorrect ptr. Call out of sequence?"); + } + + numWords = (numBytes + (sizeof(Tcl_Obj *) - 1))/sizeof(Tcl_Obj *); + return (void *) StackReallocWords(interp, numWords); +} + +/* + *-------------------------------------------------------------- + * + * Tcl_ExprObj -- + * + * Evaluate an expression in a Tcl_Obj. + * + * Results: + * A standard Tcl object result. If the result is other than TCL_OK, then + * the interpreter's result contains an error message. If the result is + * TCL_OK, then a pointer to the expression's result value object is + * stored in resultPtrPtr. In that case, the object's ref count is + * incremented to reflect the reference returned to the caller; the + * caller is then responsible for the resulting object and must, for + * example, decrement the ref count when it is finished with the object. + * + * Side effects: + * Any side effects caused by subcommands in the expression, if any. The + * interpreter result is not modified unless there is an error. + * + *-------------------------------------------------------------- + */ + +int +Tcl_ExprObj( + Tcl_Interp *interp, /* Context in which to evaluate the + * expression. */ + register Tcl_Obj *objPtr, /* Points to Tcl object containing expression + * to evaluate. */ + Tcl_Obj **resultPtrPtr) /* Where the Tcl_Obj* that is the expression + * result is stored if no errors occur. */ +{ + NRE_callback *rootPtr = TOP_CB(interp); + Tcl_Obj *resultPtr; + + TclNewObj(resultPtr); + TclNRAddCallback(interp, CopyCallback, resultPtrPtr, resultPtr, + NULL, NULL); + Tcl_NRExprObj(interp, objPtr, resultPtr); + return TclNRRunCallbacks(interp, TCL_OK, rootPtr); +} + +static int +CopyCallback( + ClientData data[], + Tcl_Interp *interp, + int result) +{ + Tcl_Obj **resultPtrPtr = data[0]; + Tcl_Obj *resultPtr = data[1]; + + if (result == TCL_OK) { + *resultPtrPtr = resultPtr; + Tcl_IncrRefCount(resultPtr); + } else { + Tcl_DecrRefCount(resultPtr); + } + return result; +} + +/* + *-------------------------------------------------------------- + * + * Tcl_NRExprObj -- + * + * Request evaluation of the expression in a Tcl_Obj by the NR stack. + * + * Results: + * Returns TCL_OK. + * + * Side effects: + * Compiles objPtr as a Tcl expression and places callbacks on the + * NR stack to execute the bytecode and store the result in resultPtr. + * If bytecode execution raises an exception, nothing is written + * to resultPtr, and the exceptional return code flows up the NR + * stack. If the exception is TCL_ERROR, an error message is left + * in the interp result and the interp's return options dictionary + * holds additional error information too. Execution of the bytecode + * may have other side effects, depending on the expression. + * + *-------------------------------------------------------------- + */ + +int +Tcl_NRExprObj( + Tcl_Interp *interp, + Tcl_Obj *objPtr, + Tcl_Obj *resultPtr) +{ + ByteCode *codePtr; + Tcl_InterpState state = Tcl_SaveInterpState(interp, TCL_OK); + + Tcl_ResetResult(interp); + codePtr = CompileExprObj(interp, objPtr); + + Tcl_NRAddCallback(interp, ExprObjCallback, state, resultPtr, + NULL, NULL); + return TclNRExecuteByteCode(interp, codePtr); +} + +static int +ExprObjCallback( + ClientData data[], + Tcl_Interp *interp, + int result) +{ + Tcl_InterpState state = data[0]; + Tcl_Obj *resultPtr = data[1]; + + if (result == TCL_OK) { + TclSetDuplicateObj(resultPtr, Tcl_GetObjResult(interp)); + (void) Tcl_RestoreInterpState(interp, state); + } else { + Tcl_DiscardInterpState(state); + } + return result; +} + +/* + *---------------------------------------------------------------------- + * + * CompileExprObj -- + * Compile a Tcl expression value into ByteCode. + * + * Results: + * A (ByteCode *) is returned pointing to the resulting ByteCode. + * + * Side effects: + * The Tcl_ObjType of objPtr is changed to the "exprcode" type, + * and the ByteCode is kept in the internal rep (along with context + * data for checking validity) for faster operations the next time + * CompileExprObj is called on the same value. + * + *---------------------------------------------------------------------- + */ + +static ByteCode * +CompileExprObj( + Tcl_Interp *interp, + Tcl_Obj *objPtr) +{ + Interp *iPtr = (Interp *) interp; + CompileEnv compEnv; /* Compilation environment structure allocated + * in frame. */ + register ByteCode *codePtr = NULL; + /* Tcl Internal type of bytecode. Initialized + * to avoid compiler warning. */ + + /* + * Get the expression ByteCode from the object. If it exists, make sure it + * is valid in the current context. + */ + if (objPtr->typePtr == &exprCodeType) { + Namespace *namespacePtr = iPtr->varFramePtr->nsPtr; + + codePtr = objPtr->internalRep.twoPtrValue.ptr1; + if (((Interp *) *codePtr->interpHandle != iPtr) + || (codePtr->compileEpoch != iPtr->compileEpoch) + || (codePtr->nsPtr != namespacePtr) + || (codePtr->nsEpoch != namespacePtr->resolverEpoch) + || (codePtr->localCachePtr != iPtr->varFramePtr->localCachePtr)) { + TclFreeIntRep(objPtr); + } + } + if (objPtr->typePtr != &exprCodeType) { + /* + * TIP #280: No invoker (yet) - Expression compilation. + */ + + int length; + const char *string = TclGetStringFromObj(objPtr, &length); + + TclInitCompileEnv(interp, &compEnv, string, length, NULL, 0); + TclCompileExpr(interp, string, length, &compEnv, 0); + + /* + * Successful compilation. If the expression yielded no instructions, + * push an zero object as the expression's result. + */ + + if (compEnv.codeNext == compEnv.codeStart) { + TclEmitPush(TclRegisterLiteral(&compEnv, "0", 1, 0), + &compEnv); + } + + /* + * Add a "done" instruction as the last instruction and change the + * object into a ByteCode object. Ownership of the literal objects and + * aux data items is given to the ByteCode object. + */ + + TclEmitOpcode(INST_DONE, &compEnv); + codePtr = TclInitByteCodeObj(objPtr, &exprCodeType, &compEnv); + TclFreeCompileEnv(&compEnv); + if (iPtr->varFramePtr->localCachePtr) { + codePtr->localCachePtr = iPtr->varFramePtr->localCachePtr; + codePtr->localCachePtr->refCount++; + } +#ifdef TCL_COMPILE_DEBUG + if (tclTraceCompile == 2) { + TclPrintByteCodeObj(interp, objPtr); + fflush(stdout); + } +#endif /* TCL_COMPILE_DEBUG */ + } + return codePtr; +} + +/* + *---------------------------------------------------------------------- + * + * DupExprCodeInternalRep -- + * + * Part of the Tcl object type implementation for Tcl expression + * bytecode. We do not copy the bytecode intrep. Instead, we return + * without setting copyPtr->typePtr, so the copy is a plain string copy + * of the expression value, and if it is to be used as a compiled + * expression, it will just need a recompile. + * + * This makes sense, because with Tcl's copy-on-write practices, the + * usual (only?) time Tcl_DuplicateObj() will be called is when the copy + * is about to be modified, which would invalidate any copied bytecode + * anyway. The only reason it might make sense to copy the bytecode is if + * we had some modifying routines that operated directly on the intrep, + * like we do for lists and dicts. + * + * Results: + * None. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +static void +DupExprCodeInternalRep( + Tcl_Obj *srcPtr, + Tcl_Obj *copyPtr) +{ + return; +} + +/* + *---------------------------------------------------------------------- + * + * FreeExprCodeInternalRep -- + * + * Part of the Tcl object type implementation for Tcl expression + * bytecode. Frees the storage allocated to hold the internal rep, unless + * ref counts indicate bytecode execution is still in progress. + * + * Results: + * None. + * + * Side effects: + * May free allocated memory. Leaves objPtr untyped. + * + *---------------------------------------------------------------------- + */ + +static void +FreeExprCodeInternalRep( + Tcl_Obj *objPtr) +{ + ByteCode *codePtr = objPtr->internalRep.twoPtrValue.ptr1; + + TclReleaseByteCode(codePtr); +} + +/* + *---------------------------------------------------------------------- + * + * TclCompileObj -- + * + * This procedure compiles the script contained in a Tcl_Obj. + * + * Results: + * A pointer to the corresponding ByteCode, never NULL. + * + * Side effects: + * The object is shimmered to bytecode type. + * + *---------------------------------------------------------------------- + */ + +ByteCode * +TclCompileObj( + Tcl_Interp *interp, + Tcl_Obj *objPtr, + const CmdFrame *invoker, + int word) +{ + register Interp *iPtr = (Interp *) interp; + register ByteCode *codePtr; /* Tcl Internal type of bytecode. */ + Namespace *namespacePtr = iPtr->varFramePtr->nsPtr; + + /* + * If the object is not already of tclByteCodeType, compile it (and reset + * the compilation flags in the interpreter; this should be done after any + * compilation). Otherwise, check that it is "fresh" enough. + */ + + if (objPtr->typePtr == &tclByteCodeType) { + /* + * Make sure the Bytecode hasn't been invalidated by, e.g., someone + * redefining a command with a compile procedure (this might make the + * compiled code wrong). The object needs to be recompiled if it was + * compiled in/for a different interpreter, or for a different + * namespace, or for the same namespace but with different name + * resolution rules. Precompiled objects, however, are immutable and + * therefore they are not recompiled, even if the epoch has changed. + * + * To be pedantically correct, we should also check that the + * originating procPtr is the same as the current context procPtr + * (assuming one exists at all - none for global level). This code is + * #def'ed out because [info body] was changed to never return a + * bytecode type object, which should obviate us from the extra checks + * here. + */ + + codePtr = objPtr->internalRep.twoPtrValue.ptr1; + if (((Interp *) *codePtr->interpHandle != iPtr) + || (codePtr->compileEpoch != iPtr->compileEpoch) + || (codePtr->nsPtr != namespacePtr) + || (codePtr->nsEpoch != namespacePtr->resolverEpoch)) { + if (!(codePtr->flags & TCL_BYTECODE_PRECOMPILED)) { + goto recompileObj; + } + if ((Interp *) *codePtr->interpHandle != iPtr) { + Tcl_Panic("Tcl_EvalObj: compiled script jumped interps"); + } + codePtr->compileEpoch = iPtr->compileEpoch; + } + + /* + * Check that any compiled locals do refer to the current proc + * environment! If not, recompile. + */ + + if (!(codePtr->flags & TCL_BYTECODE_PRECOMPILED) && + (codePtr->procPtr == NULL) && + (codePtr->localCachePtr != iPtr->varFramePtr->localCachePtr)){ + goto recompileObj; + } + + /* + * #280. + * Literal sharing fix. This part of the fix is not required by 8.4 + * nor 8.5, because they eval-direct any literals, so just saving the + * argument locations per command in bytecode is enough, embedded + * 'eval' commands, etc. get the correct information. + * + * But in 8.6 all the embedded script are compiled, and the resulting + * bytecode stored in the literal. Now the shared literal has bytecode + * with location data for _one_ particular location this literal is + * found at. If we get executed from a different location the bytecode + * has to be recompiled to get the correct locations. Not doing this + * will execute the saved bytecode with data for a different location, + * causing 'info frame' to point to the wrong place in the sources. + * + * Future optimizations ... + * (1) Save the location data (ExtCmdLoc) keyed by start line. In that + * case we recompile once per location of the literal, but not + * continously, because the moment we have all locations we do not + * need to recompile any longer. + * + * (2) Alternative: Do not recompile, tell the execution engine the + * offset between saved starting line and actual one. Then modify + * the users to adjust the locations they have by this offset. + * + * (3) Alternative 2: Do not fully recompile, adjust just the location + * information. + */ + + if (invoker == NULL) { + return codePtr; + } else { + Tcl_HashEntry *hePtr = + Tcl_FindHashEntry(iPtr->lineBCPtr, codePtr); + ExtCmdLoc *eclPtr; + CmdFrame *ctxCopyPtr; + int redo; + + if (!hePtr) { + return codePtr; + } + + eclPtr = Tcl_GetHashValue(hePtr); + redo = 0; + ctxCopyPtr = TclStackAlloc(interp, sizeof(CmdFrame)); + *ctxCopyPtr = *invoker; + + if (invoker->type == TCL_LOCATION_BC) { + /* + * Note: Type BC => ctx.data.eval.path is not used. + * ctx.data.tebc.codePtr used instead + */ + + TclGetSrcInfoForPc(ctxCopyPtr); + if (ctxCopyPtr->type == TCL_LOCATION_SOURCE) { + /* + * The reference made by 'TclGetSrcInfoForPc' is dead. + */ + + Tcl_DecrRefCount(ctxCopyPtr->data.eval.path); + ctxCopyPtr->data.eval.path = NULL; + } + } + + if (word < ctxCopyPtr->nline) { + /* + * Note: We do not care if the line[word] is -1. This is a + * difference and requires a recompile (location changed from + * absolute to relative, literal is used fixed and through + * variable) + * + * Example: + * test info-32.0 using literal of info-24.8 + * (dict with ... vs set body ...). + */ + + redo = ((eclPtr->type == TCL_LOCATION_SOURCE) + && (eclPtr->start != ctxCopyPtr->line[word])) + || ((eclPtr->type == TCL_LOCATION_BC) + && (ctxCopyPtr->type == TCL_LOCATION_SOURCE)); + } + + TclStackFree(interp, ctxCopyPtr); + if (!redo) { + return codePtr; + } + } + } + + recompileObj: + iPtr->errorLine = 1; + + /* + * TIP #280. Remember the invoker for a moment in the interpreter + * structures so that the byte code compiler can pick it up when + * initializing the compilation environment, i.e. the extended location + * information. + */ + + iPtr->invokeCmdFramePtr = invoker; + iPtr->invokeWord = word; + TclSetByteCodeFromAny(interp, objPtr, NULL, NULL); + iPtr->invokeCmdFramePtr = NULL; + codePtr = objPtr->internalRep.twoPtrValue.ptr1; + if (iPtr->varFramePtr->localCachePtr) { + codePtr->localCachePtr = iPtr->varFramePtr->localCachePtr; + codePtr->localCachePtr->refCount++; + } + return codePtr; +} + +/* + *---------------------------------------------------------------------- + * + * TclIncrObj -- + * + * Increment an integeral value in a Tcl_Obj by an integeral value held + * in another Tcl_Obj. Caller is responsible for making sure we can + * update the first object. + * + * Results: + * TCL_ERROR if either object is non-integer, and TCL_OK otherwise. On + * error, an error message is left in the interpreter (if it is not NULL, + * of course). + * + * Side effects: + * valuePtr gets the new incrmented value. + * + *---------------------------------------------------------------------- + */ + +int +TclIncrObj( + Tcl_Interp *interp, + Tcl_Obj *valuePtr, + Tcl_Obj *incrPtr) +{ + ClientData ptr1, ptr2; + int type1, type2; + mp_int value, incr; + + if (Tcl_IsShared(valuePtr)) { + Tcl_Panic("%s called with shared object", "TclIncrObj"); + } + + if (GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) { + /* + * Produce error message (reparse?!) + */ + + return TclGetIntFromObj(interp, valuePtr, &type1); + } + if (GetNumberFromObj(NULL, incrPtr, &ptr2, &type2) != TCL_OK) { + /* + * Produce error message (reparse?!) + */ + + TclGetIntFromObj(interp, incrPtr, &type1); + Tcl_AddErrorInfo(interp, "\n (reading increment)"); + return TCL_ERROR; + } + + if ((type1 == TCL_NUMBER_LONG) && (type2 == TCL_NUMBER_LONG)) { + long augend = *((const long *) ptr1); + long addend = *((const long *) ptr2); + long sum = augend + addend; + + /* + * Overflow when (augend and sum have different sign) and (augend and + * addend have the same sign). This is encapsulated in the Overflowing + * macro. + */ + + if (!Overflowing(augend, addend, sum)) { + TclSetLongObj(valuePtr, sum); + return TCL_OK; + } +#ifndef TCL_WIDE_INT_IS_LONG + { + Tcl_WideInt w1 = (Tcl_WideInt) augend; + Tcl_WideInt w2 = (Tcl_WideInt) addend; + + /* + * We know the sum value is outside the long range, so we use the + * macro form that doesn't range test again. + */ + + TclSetWideIntObj(valuePtr, w1 + w2); + return TCL_OK; + } +#endif + } + + if ((type1 == TCL_NUMBER_DOUBLE) || (type1 == TCL_NUMBER_NAN)) { + /* + * Produce error message (reparse?!) + */ + + return TclGetIntFromObj(interp, valuePtr, &type1); + } + if ((type2 == TCL_NUMBER_DOUBLE) || (type2 == TCL_NUMBER_NAN)) { + /* + * Produce error message (reparse?!) + */ + + TclGetIntFromObj(interp, incrPtr, &type1); + Tcl_AddErrorInfo(interp, "\n (reading increment)"); + return TCL_ERROR; + } + +#ifndef TCL_WIDE_INT_IS_LONG + if ((type1 != TCL_NUMBER_BIG) && (type2 != TCL_NUMBER_BIG)) { + Tcl_WideInt w1, w2, sum; + + TclGetWideIntFromObj(NULL, valuePtr, &w1); + TclGetWideIntFromObj(NULL, incrPtr, &w2); + sum = w1 + w2; + + /* + * Check for overflow. + */ + + if (!Overflowing(w1, w2, sum)) { + Tcl_SetWideIntObj(valuePtr, sum); + return TCL_OK; + } + } +#endif + + Tcl_TakeBignumFromObj(interp, valuePtr, &value); + Tcl_GetBignumFromObj(interp, incrPtr, &incr); + mp_add(&value, &incr, &value); + mp_clear(&incr); + Tcl_SetBignumObj(valuePtr, &value); + return TCL_OK; +} + +/* + *---------------------------------------------------------------------- + * + * ArgumentBCEnter -- + * + * This is a helper for TclNRExecuteByteCode/TEBCresume that encapsulates + * a code sequence that is fairly common in the code but *not* commonly + * called. + * + * Results: + * None + * + * Side effects: + * May register information about the bytecode in the command frame. + * + *---------------------------------------------------------------------- + */ + +static void +ArgumentBCEnter( + Tcl_Interp *interp, + ByteCode *codePtr, + TEBCdata *tdPtr, + const unsigned char *pc, + int objc, + Tcl_Obj **objv) +{ + int cmd; + + if (GetSrcInfoForPc(pc, codePtr, NULL, NULL, &cmd)) { + TclArgumentBCEnter(interp, objv, objc, codePtr, &tdPtr->cmdFrame, cmd, + pc - codePtr->codeStart); + } +} + +/* + *---------------------------------------------------------------------- + * + * TclNRExecuteByteCode -- + * + * This procedure executes the instructions of a ByteCode structure. It + * returns when a "done" instruction is executed or an error occurs. + * + * Results: + * The return value is one of the return codes defined in tcl.h (such as + * TCL_OK), and interp->objResultPtr refers to a Tcl object that either + * contains the result of executing the code or an error message. + * + * Side effects: + * Almost certainly, depending on the ByteCode's instructions. + * + *---------------------------------------------------------------------- + */ +#define bcFramePtr (&TD->cmdFrame) +#define initCatchTop ((ptrdiff_t *) (&TD->stack[-1])) +#define initTosPtr ((Tcl_Obj **) (initCatchTop+codePtr->maxExceptDepth)) +#define esPtr (iPtr->execEnvPtr->execStackPtr) + +int +TclNRExecuteByteCode( + Tcl_Interp *interp, /* Token for command interpreter. */ + ByteCode *codePtr) /* The bytecode sequence to interpret. */ +{ + Interp *iPtr = (Interp *) interp; + TEBCdata *TD; + int size = sizeof(TEBCdata) - 1 + + (codePtr->maxStackDepth + codePtr->maxExceptDepth) + * sizeof(void *); + int numWords = (size + sizeof(Tcl_Obj *) - 1) / sizeof(Tcl_Obj *); + + TclPreserveByteCode(codePtr); + + /* + * Reserve the stack, setup the TEBCdataPtr (TD) and CallFrame + * + * The execution uses a unified stack: first a TEBCdata, immediately + * above it a CmdFrame, then the catch stack, then the execution stack. + * + * Make sure the catch stack is large enough to hold the maximum number of + * catch commands that could ever be executing at the same time (this will + * be no more than the exception range array's depth). Make sure the + * execution stack is large enough to execute this ByteCode. + */ + + TD = (TEBCdata *) GrowEvaluationStack(iPtr->execEnvPtr, numWords, 0); + esPtr->tosPtr = initTosPtr; + + TD->codePtr = codePtr; + TD->catchTop = initCatchTop; + TD->auxObjList = NULL; + + /* + * TIP #280: Initialize the frame. Do not push it yet: it will be pushed + * every time that we call out from this TD, popped when we return to it. + */ + + bcFramePtr->type = ((codePtr->flags & TCL_BYTECODE_PRECOMPILED) + ? TCL_LOCATION_PREBC : TCL_LOCATION_BC); + bcFramePtr->level = (iPtr->cmdFramePtr ? iPtr->cmdFramePtr->level+1 : 1); + bcFramePtr->framePtr = iPtr->framePtr; + bcFramePtr->nextPtr = iPtr->cmdFramePtr; + bcFramePtr->nline = 0; + bcFramePtr->line = NULL; + bcFramePtr->litarg = NULL; + bcFramePtr->data.tebc.codePtr = codePtr; + bcFramePtr->data.tebc.pc = NULL; + bcFramePtr->cmdObj = NULL; + bcFramePtr->cmd = NULL; + bcFramePtr->len = 0; + +#ifdef TCL_COMPILE_STATS + iPtr->stats.numExecutions++; +#endif + + /* + * Test namespace-50.9 demonstrates the need for this call. + * Use a --enable-symbols=mem bug to see. + */ + + TclResetRewriteEnsemble(interp, 1); + + /* + * Push the callback for bytecode execution + */ + + TclNRAddCallback(interp, TEBCresume, TD, /* pc */ NULL, + /* cleanup */ INT2PTR(0), NULL); + return TCL_OK; +} + +static int +TEBCresume( + ClientData data[], + Tcl_Interp *interp, + int result) +{ + /* + * Compiler cast directive - not a real variable. + * Interp *iPtr = (Interp *) interp; + */ +#define iPtr ((Interp *) interp) + + /* + * Check just the read-traced/write-traced bit of a variable. + */ + +#define ReadTraced(varPtr) ((varPtr)->flags & VAR_TRACED_READ) +#define WriteTraced(varPtr) ((varPtr)->flags & VAR_TRACED_WRITE) +#define UnsetTraced(varPtr) ((varPtr)->flags & VAR_TRACED_UNSET) + + /* + * Bottom of allocated stack holds the NR data + */ + + /* + * Constants: variables that do not change during the execution, used + * sporadically: no special need for speed. + */ + + unsigned interruptCounter = 1; + /* Counter that is used to work out when to + * call Tcl_AsyncReady(). This must be 1 + * initially so that we call the async-check + * stanza early, otherwise there are command + * sequences that can make the interpreter + * busy-loop without an opportunity to + * recognise an interrupt. */ + const char *curInstName; +#ifdef TCL_COMPILE_DEBUG + int traceInstructions; /* Whether we are doing instruction-level + * tracing or not. */ +#endif + + Var *compiledLocals = iPtr->varFramePtr->compiledLocals; + Tcl_Obj **constants = &iPtr->execEnvPtr->constants[0]; + +#define LOCAL(i) (&compiledLocals[(i)]) +#define TCONST(i) (constants[(i)]) + + /* + * These macros are just meant to save some global variables that are not + * used too frequently + */ + + TEBCdata *TD = data[0]; +#define auxObjList (TD->auxObjList) +#define catchTop (TD->catchTop) +#define codePtr (TD->codePtr) + + /* + * Globals: variables that store state, must remain valid at all times. + */ + + Tcl_Obj **tosPtr; /* Cached pointer to top of evaluation + * stack. */ + const unsigned char *pc = data[1]; + /* The current program counter. */ + unsigned char inst; /* The currently running instruction */ + + /* + * Transfer variables - needed only between opcodes, but not while + * executing an instruction. + */ + + int cleanup = PTR2INT(data[2]); + Tcl_Obj *objResultPtr; + int checkInterp; /* Indicates when a check of interp readyness + * is necessary. Set by CACHE_STACK_INFO() */ + + /* + * Locals - variables that are used within opcodes or bounded sections of + * the file (jumps between opcodes within a family). + * NOTE: These are now mostly defined locally where needed. + */ + + Tcl_Obj *objPtr, *valuePtr, *value2Ptr, *part1Ptr, *part2Ptr, *tmpPtr; + Tcl_Obj **objv; + int objc = 0; + int opnd, length, pcAdjustment; + Var *varPtr, *arrayPtr; +#ifdef TCL_COMPILE_DEBUG + char cmdNameBuf[21]; +#endif + +#ifdef TCL_COMPILE_DEBUG + int starting = 1; + traceInstructions = (tclTraceExec == 3); +#endif + + TEBC_DATA_DIG(); + +#ifdef TCL_COMPILE_DEBUG + if (!pc && (tclTraceExec >= 2)) { + PrintByteCodeInfo(codePtr); + fprintf(stdout, " Starting stack top=%d\n", (int) CURR_DEPTH); + fflush(stdout); + } +#endif + + if (!pc) { + /* bytecode is starting from scratch */ + checkInterp = 0; + pc = codePtr->codeStart; + goto cleanup0; + } else { + /* resume from invocation */ + CACHE_STACK_INFO(); + + NRE_ASSERT(iPtr->cmdFramePtr == bcFramePtr); + if (bcFramePtr->cmdObj) { + Tcl_DecrRefCount(bcFramePtr->cmdObj); + bcFramePtr->cmdObj = NULL; + bcFramePtr->cmd = NULL; + } + iPtr->cmdFramePtr = bcFramePtr->nextPtr; + if (iPtr->flags & INTERP_DEBUG_FRAME) { + TclArgumentBCRelease(interp, bcFramePtr); + } + if (iPtr->execEnvPtr->rewind) { + result = TCL_ERROR; + goto abnormalReturn; + } + if (codePtr->flags & TCL_BYTECODE_RECOMPILE) { + iPtr->flags |= ERR_ALREADY_LOGGED; + codePtr->flags &= ~TCL_BYTECODE_RECOMPILE; + } + + if (result != TCL_OK) { + pc--; + goto processExceptionReturn; + } + + /* + * Push the call's object result and continue execution with the next + * instruction. + */ + + TRACE_WITH_OBJ(("%u => ... after \"%.20s\": TCL_OK, result=", + objc, cmdNameBuf), Tcl_GetObjResult(interp)); + + /* + * Reset the interp's result to avoid possible duplications of large + * objects [Bug 781585]. We do not call Tcl_ResetResult to avoid any + * side effects caused by the resetting of errorInfo and errorCode + * [Bug 804681], which are not needed here. We chose instead to + * manipulate the interp's object result directly. + * + * Note that the result object is now in objResultPtr, it keeps the + * refCount it had in its role of iPtr->objResultPtr. + */ + + objResultPtr = Tcl_GetObjResult(interp); + TclNewObj(objPtr); + Tcl_IncrRefCount(objPtr); + iPtr->objResultPtr = objPtr; +#ifndef TCL_COMPILE_DEBUG + if (*pc == INST_POP) { + TclDecrRefCount(objResultPtr); + NEXT_INST_V(1, cleanup, 0); + } +#endif + NEXT_INST_V(0, cleanup, -1); + } + + /* + * Targets for standard instruction endings; unrolled for speed in the + * most frequent cases (instructions that consume up to two stack + * elements). + * + * This used to be a "for(;;)" loop, with each instruction doing its own + * cleanup. + */ + + cleanupV_pushObjResultPtr: + switch (cleanup) { + case 0: + *(++tosPtr) = (objResultPtr); + goto cleanup0; + default: + cleanup -= 2; + while (cleanup--) { + objPtr = POP_OBJECT(); + TclDecrRefCount(objPtr); + } + case 2: + cleanup2_pushObjResultPtr: + objPtr = POP_OBJECT(); + TclDecrRefCount(objPtr); + case 1: + cleanup1_pushObjResultPtr: + objPtr = OBJ_AT_TOS; + TclDecrRefCount(objPtr); + } + OBJ_AT_TOS = objResultPtr; + goto cleanup0; + + cleanupV: + switch (cleanup) { + default: + cleanup -= 2; + while (cleanup--) { + objPtr = POP_OBJECT(); + TclDecrRefCount(objPtr); + } + case 2: + cleanup2: + objPtr = POP_OBJECT(); + TclDecrRefCount(objPtr); + case 1: + cleanup1: + objPtr = POP_OBJECT(); + TclDecrRefCount(objPtr); + case 0: + /* + * We really want to do nothing now, but this is needed for some + * compilers (SunPro CC). + */ + + break; + } + cleanup0: + + /* + * Check for asynchronous handlers [Bug 746722]; we do the check every + * ASYNC_CHECK_COUNT instructions. + */ + + if ((--interruptCounter) == 0) { + interruptCounter = ASYNC_CHECK_COUNT; + DECACHE_STACK_INFO(); + if (TclAsyncReady(iPtr)) { + result = Tcl_AsyncInvoke(interp, result); + if (result == TCL_ERROR) { + CACHE_STACK_INFO(); + goto gotError; + } + } + + if (TclCanceled(iPtr)) { + if (Tcl_Canceled(interp, TCL_LEAVE_ERR_MSG) == TCL_ERROR) { + CACHE_STACK_INFO(); + goto gotError; + } + } + + if (TclLimitReady(iPtr->limit)) { + if (Tcl_LimitCheck(interp) == TCL_ERROR) { + CACHE_STACK_INFO(); + goto gotError; + } + } + CACHE_STACK_INFO(); + } + + /* + * These two instructions account for 26% of all instructions (according + * to measurements on tclbench by Ben Vitale + * [http://www.cs.toronto.edu/syslab/pubs/tcl2005-vitale-zaleski.pdf] + * Resolving them before the switch reduces the cost of branch + * mispredictions, seems to improve runtime by 5% to 15%, and (amazingly!) + * reduces total obj size. + */ + + inst = *pc; + + peepholeStart: +#ifdef TCL_COMPILE_STATS + iPtr->stats.instructionCount[*pc]++; +#endif + +#ifdef TCL_COMPILE_DEBUG + /* + * Skip the stack depth check if an expansion is in progress. + */ + + CHECK_STACK(); + if (traceInstructions) { + fprintf(stdout, "%2d: %2d ", iPtr->numLevels, (int) CURR_DEPTH); + TclPrintInstruction(codePtr, pc); + fflush(stdout); + } +#endif /* TCL_COMPILE_DEBUG */ + + TCL_DTRACE_INST_NEXT(); + + if (inst == INST_LOAD_SCALAR1) { + goto instLoadScalar1; + } else if (inst == INST_PUSH1) { + PUSH_OBJECT(codePtr->objArrayPtr[TclGetUInt1AtPtr(pc+1)]); + TRACE_WITH_OBJ(("%u => ", TclGetUInt1AtPtr(pc+1)), OBJ_AT_TOS); + inst = *(pc += 2); + goto peepholeStart; + } else if (inst == INST_START_CMD) { + /* + * Peephole: do not run INST_START_CMD, just skip it + */ + + iPtr->cmdCount += TclGetUInt4AtPtr(pc+5); + if (checkInterp) { + checkInterp = 0; + if (((codePtr->compileEpoch != iPtr->compileEpoch) || + (codePtr->nsEpoch != iPtr->varFramePtr->nsPtr->resolverEpoch)) && + !(codePtr->flags & TCL_BYTECODE_PRECOMPILED)) { + goto instStartCmdFailed; + } + } + inst = *(pc += 9); + goto peepholeStart; + } else if (inst == INST_NOP) { +#ifndef TCL_COMPILE_DEBUG + while (inst == INST_NOP) +#endif + { + inst = *++pc; + } + goto peepholeStart; + } + + switch (inst) { + case INST_SYNTAX: + case INST_RETURN_IMM: { + int code = TclGetInt4AtPtr(pc+1); + int level = TclGetUInt4AtPtr(pc+5); + + /* + * OBJ_AT_TOS is returnOpts, OBJ_UNDER_TOS is resultObjPtr. + */ + + TRACE(("%u %u => ", code, level)); + result = TclProcessReturn(interp, code, level, OBJ_AT_TOS); + if (result == TCL_OK) { + TRACE_APPEND(("continuing to next instruction (result=\"%.30s\")\n", + O2S(objResultPtr))); + NEXT_INST_F(9, 1, 0); + } + Tcl_SetObjResult(interp, OBJ_UNDER_TOS); + if (*pc == INST_SYNTAX) { + iPtr->flags &= ~ERR_ALREADY_LOGGED; + } + cleanup = 2; + TRACE_APPEND(("\n")); + goto processExceptionReturn; + } + + case INST_RETURN_STK: + TRACE(("=> ")); + objResultPtr = POP_OBJECT(); + result = Tcl_SetReturnOptions(interp, OBJ_AT_TOS); + if (result == TCL_OK) { + Tcl_DecrRefCount(OBJ_AT_TOS); + OBJ_AT_TOS = objResultPtr; + TRACE_APPEND(("continuing to next instruction (result=\"%.30s\")\n", + O2S(objResultPtr))); + NEXT_INST_F(1, 0, 0); + } else if (result == TCL_ERROR) { + /* + * BEWARE! Must do this in this order, because an error in the + * option dictionary overrides the result (and can be verified by + * test). + */ + + Tcl_SetObjResult(interp, objResultPtr); + Tcl_SetReturnOptions(interp, OBJ_AT_TOS); + Tcl_DecrRefCount(OBJ_AT_TOS); + OBJ_AT_TOS = objResultPtr; + } else { + Tcl_DecrRefCount(OBJ_AT_TOS); + OBJ_AT_TOS = objResultPtr; + Tcl_SetObjResult(interp, objResultPtr); + } + cleanup = 1; + TRACE_APPEND(("\n")); + goto processExceptionReturn; + + { + CoroutineData *corPtr; + int yieldParameter; + + case INST_YIELD: + corPtr = iPtr->execEnvPtr->corPtr; + TRACE(("%.30s => ", O2S(OBJ_AT_TOS))); + if (!corPtr) { + TRACE_APPEND(("ERROR: yield outside coroutine\n")); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "yield can only be called in a coroutine", -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "COROUTINE", "ILLEGAL_YIELD", + NULL); + CACHE_STACK_INFO(); + goto gotError; + } + +#ifdef TCL_COMPILE_DEBUG + if (tclTraceExec >= 2) { + if (traceInstructions) { + TRACE_APPEND(("YIELD...\n")); + } else { + fprintf(stdout, "%d: (%u) yielding value \"%.30s\"\n", + iPtr->numLevels, (unsigned)(pc - codePtr->codeStart), + Tcl_GetString(OBJ_AT_TOS)); + } + fflush(stdout); + } +#endif + yieldParameter = 0; + Tcl_SetObjResult(interp, OBJ_AT_TOS); + goto doYield; + + case INST_YIELD_TO_INVOKE: + corPtr = iPtr->execEnvPtr->corPtr; + valuePtr = OBJ_AT_TOS; + if (!corPtr) { + TRACE(("[%.30s] => ERROR: yield outside coroutine\n", + O2S(valuePtr))); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "yieldto can only be called in a coroutine", -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "COROUTINE", "ILLEGAL_YIELD", + NULL); + CACHE_STACK_INFO(); + goto gotError; + } + if (((Namespace *)TclGetCurrentNamespace(interp))->flags & NS_DYING) { + TRACE(("[%.30s] => ERROR: yield in deleted\n", + O2S(valuePtr))); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "yieldto called in deleted namespace", -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "COROUTINE", "YIELDTO_IN_DELETED", + NULL); + CACHE_STACK_INFO(); + goto gotError; + } + +#ifdef TCL_COMPILE_DEBUG + if (tclTraceExec >= 2) { + if (traceInstructions) { + TRACE(("[%.30s] => YIELD...\n", O2S(valuePtr))); + } else { + /* FIXME: What is the right thing to trace? */ + fprintf(stdout, "%d: (%u) yielding to [%.30s]\n", + iPtr->numLevels, (unsigned)(pc - codePtr->codeStart), + TclGetString(valuePtr)); + } + fflush(stdout); + } +#endif + + /* + * Install a tailcall record in the caller and continue with the + * yield. The yield is switched into multi-return mode (via the + * 'yieldParameter'). + */ + + Tcl_IncrRefCount(valuePtr); + iPtr->execEnvPtr = corPtr->callerEEPtr; + TclSetTailcall(interp, valuePtr); + iPtr->execEnvPtr = corPtr->eePtr; + yieldParameter = (PTR2INT(NULL)+1); /*==CORO_ACTIVATE_YIELDM*/ + + doYield: + /* TIP #280: Record the last piece of info needed by + * 'TclGetSrcInfoForPc', and push the frame. + */ + + bcFramePtr->data.tebc.pc = (char *) pc; + iPtr->cmdFramePtr = bcFramePtr; + + if (iPtr->flags & INTERP_DEBUG_FRAME) { + ArgumentBCEnter(interp, codePtr, TD, pc, objc, objv); + } + + pc++; + cleanup = 1; + TEBC_YIELD(); + TclNRAddCallback(interp, TclNRCoroutineActivateCallback, corPtr, + INT2PTR(yieldParameter), NULL, NULL); + return TCL_OK; + } + + case INST_TAILCALL: { + Tcl_Obj *listPtr, *nsObjPtr; + + opnd = TclGetUInt1AtPtr(pc+1); + + if (!(iPtr->varFramePtr->isProcCallFrame & 1)) { + TRACE(("%d => ERROR: tailcall in non-proc context\n", opnd)); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "tailcall can only be called from a proc or lambda", -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "TAILCALL", "ILLEGAL", NULL); + CACHE_STACK_INFO(); + goto gotError; + } + +#ifdef TCL_COMPILE_DEBUG + /* FIXME: What is the right thing to trace? */ + { + register int i; + + TRACE(("%d [", opnd)); + for (i=opnd-1 ; i>=0 ; i--) { + TRACE_APPEND(("\"%.30s\"", O2S(OBJ_AT_DEPTH(i)))); + if (i > 0) { + TRACE_APPEND((" ")); + } + } + TRACE_APPEND(("] => RETURN...")); + } +#endif + + /* + * Push the evaluation of the called command into the NR callback + * stack. + */ + + listPtr = Tcl_NewListObj(opnd, &OBJ_AT_DEPTH(opnd-1)); + nsObjPtr = Tcl_NewStringObj(iPtr->varFramePtr->nsPtr->fullName, -1); + TclListObjSetElement(interp, listPtr, 0, nsObjPtr); + if (iPtr->varFramePtr->tailcallPtr) { + Tcl_DecrRefCount(iPtr->varFramePtr->tailcallPtr); + } + iPtr->varFramePtr->tailcallPtr = listPtr; + + result = TCL_RETURN; + cleanup = opnd; + goto processExceptionReturn; + } + + case INST_DONE: + if (tosPtr > initTosPtr) { + /* + * Set the interpreter's object result to point to the topmost + * object from the stack, and check for a possible [catch]. The + * stackTop's level and refCount will be handled by "processCatch" + * or "abnormalReturn". + */ + + Tcl_SetObjResult(interp, OBJ_AT_TOS); +#ifdef TCL_COMPILE_DEBUG + TRACE_WITH_OBJ(("=> return code=%d, result=", result), + iPtr->objResultPtr); + if (traceInstructions) { + fprintf(stdout, "\n"); + } +#endif + goto checkForCatch; + } + (void) POP_OBJECT(); + goto abnormalReturn; + + case INST_PUSH4: + objResultPtr = codePtr->objArrayPtr[TclGetUInt4AtPtr(pc+1)]; + TRACE_WITH_OBJ(("%u => ", TclGetUInt4AtPtr(pc+1)), objResultPtr); + NEXT_INST_F(5, 0, 1); + + case INST_POP: + TRACE_WITH_OBJ(("=> discarding "), OBJ_AT_TOS); + objPtr = POP_OBJECT(); + TclDecrRefCount(objPtr); + NEXT_INST_F(1, 0, 0); + + case INST_DUP: + objResultPtr = OBJ_AT_TOS; + TRACE_WITH_OBJ(("=> "), objResultPtr); + NEXT_INST_F(1, 0, 1); + + case INST_OVER: + opnd = TclGetUInt4AtPtr(pc+1); + objResultPtr = OBJ_AT_DEPTH(opnd); + TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr); + NEXT_INST_F(5, 0, 1); + + case INST_REVERSE: { + Tcl_Obj **a, **b; + + opnd = TclGetUInt4AtPtr(pc+1); + a = tosPtr-(opnd-1); + b = tosPtr; + while (a<b) { + tmpPtr = *a; + *a = *b; + *b = tmpPtr; + a++; b--; + } + TRACE(("%u => OK\n", opnd)); + NEXT_INST_F(5, 0, 0); + } + + case INST_STR_CONCAT1: + + opnd = TclGetUInt1AtPtr(pc+1); + + if (TCL_OK != TclStringCatObjv(interp, /* inPlace */ 1, + opnd, &OBJ_AT_DEPTH(opnd-1), &objResultPtr)) { + TRACE_ERROR(interp); + goto gotError; + } + + TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr); + NEXT_INST_V(2, opnd, 1); + + case INST_CONCAT_STK: + /* + * Pop the opnd (objc) top stack elements, run through Tcl_ConcatObj, + * and then decrement their ref counts. + */ + + opnd = TclGetUInt4AtPtr(pc+1); + objResultPtr = Tcl_ConcatObj(opnd, &OBJ_AT_DEPTH(opnd-1)); + TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr); + NEXT_INST_V(5, opnd, 1); + + case INST_EXPAND_START: + /* + * Push an element to the auxObjList. This records the current + * stack depth - i.e., the point in the stack where the expanded + * command starts. + * + * Use a Tcl_Obj as linked list element; slight mem waste, but faster + * allocation than ckalloc. This also abuses the Tcl_Obj structure, as + * we do not define a special tclObjType for it. It is not dangerous + * as the obj is never passed anywhere, so that all manipulations are + * performed here and in INST_INVOKE_EXPANDED (in case of an expansion + * error, also in INST_EXPAND_STKTOP). + */ + + TclNewObj(objPtr); + objPtr->internalRep.twoPtrValue.ptr2 = INT2PTR(CURR_DEPTH); + objPtr->length = 0; + PUSH_TAUX_OBJ(objPtr); + TRACE(("=> mark depth as %d\n", (int) CURR_DEPTH)); + NEXT_INST_F(1, 0, 0); + + case INST_EXPAND_DROP: + /* + * Drops an element of the auxObjList, popping stack elements to + * restore the stack to the state before the point where the aux + * element was created. + */ + + CLANG_ASSERT(auxObjList); + objc = CURR_DEPTH - PTR2INT(auxObjList->internalRep.twoPtrValue.ptr2); + POP_TAUX_OBJ(); +#ifdef TCL_COMPILE_DEBUG + /* Ugly abuse! */ + starting = 1; +#endif + TRACE(("=> drop %d items\n", objc)); + NEXT_INST_V(1, objc, 0); + + case INST_EXPAND_STKTOP: { + int i; + ptrdiff_t moved; + + /* + * Make sure that the element at stackTop is a list; if not, just + * leave with an error. Note that the element from the expand list + * will be removed at checkForCatch. + */ + + objPtr = OBJ_AT_TOS; + TRACE(("\"%.30s\" => ", O2S(objPtr))); + if (TclListObjGetElements(interp, objPtr, &objc, &objv) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + (void) POP_OBJECT(); + + /* + * Make sure there is enough room in the stack to expand this list + * *and* process the rest of the command (at least up to the next + * argument expansion or command end). The operand is the current + * stack depth, as seen by the compiler. + */ + + auxObjList->length += objc - 1; + if ((objc > 1) && (auxObjList->length > 0)) { + length = auxObjList->length /* Total expansion room we need */ + + codePtr->maxStackDepth /* Beyond the original max */ + - CURR_DEPTH; /* Relative to where we are */ + DECACHE_STACK_INFO(); + moved = GrowEvaluationStack(iPtr->execEnvPtr, length, 1) + - (Tcl_Obj **) TD; + if (moved) { + /* + * Change the global data to point to the new stack: move the + * TEBCdataPtr TD, recompute the position of every other + * stack-allocated parameter, update the stack pointers. + */ + + TD = (TEBCdata *) (((Tcl_Obj **)TD) + moved); + + catchTop += moved; + tosPtr += moved; + } + } + + /* + * Expand the list at stacktop onto the stack; free the list. Knowing + * that it has a freeIntRepProc we use Tcl_DecrRefCount(). + */ + + for (i = 0; i < objc; i++) { + PUSH_OBJECT(objv[i]); + } + + TRACE_APPEND(("OK\n")); + Tcl_DecrRefCount(objPtr); + NEXT_INST_F(5, 0, 0); + } + + case INST_EXPR_STK: { + ByteCode *newCodePtr; + + bcFramePtr->data.tebc.pc = (char *) pc; + iPtr->cmdFramePtr = bcFramePtr; + DECACHE_STACK_INFO(); + newCodePtr = CompileExprObj(interp, OBJ_AT_TOS); + CACHE_STACK_INFO(); + cleanup = 1; + pc++; + TEBC_YIELD(); + return TclNRExecuteByteCode(interp, newCodePtr); + } + + /* + * INVOCATION BLOCK + */ + + instEvalStk: + case INST_EVAL_STK: + bcFramePtr->data.tebc.pc = (char *) pc; + iPtr->cmdFramePtr = bcFramePtr; + + cleanup = 1; + pc += 1; + TEBC_YIELD(); + return TclNREvalObjEx(interp, OBJ_AT_TOS, 0, NULL, 0); + + case INST_INVOKE_EXPANDED: + CLANG_ASSERT(auxObjList); + objc = CURR_DEPTH - PTR2INT(auxObjList->internalRep.twoPtrValue.ptr2); + POP_TAUX_OBJ(); + if (objc) { + pcAdjustment = 1; + goto doInvocation; + } + + /* + * Nothing was expanded, return {}. + */ + + TclNewObj(objResultPtr); + NEXT_INST_F(1, 0, 1); + + case INST_INVOKE_STK4: + objc = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + goto doInvocation; + + case INST_INVOKE_STK1: + objc = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + + doInvocation: + objv = &OBJ_AT_DEPTH(objc-1); + cleanup = objc; + +#ifdef TCL_COMPILE_DEBUG + if (tclTraceExec >= 2) { + int i; + + if (traceInstructions) { + strncpy(cmdNameBuf, TclGetString(objv[0]), 20); + TRACE(("%u => call ", objc)); + } else { + fprintf(stdout, "%d: (%u) invoking ", iPtr->numLevels, + (unsigned)(pc - codePtr->codeStart)); + } + for (i = 0; i < objc; i++) { + TclPrintObject(stdout, objv[i], 15); + fprintf(stdout, " "); + } + fprintf(stdout, "\n"); + fflush(stdout); + } +#endif /*TCL_COMPILE_DEBUG*/ + + /* + * Finally, let TclEvalObjv handle the command. + * + * TIP #280: Record the last piece of info needed by + * 'TclGetSrcInfoForPc', and push the frame. + */ + + bcFramePtr->data.tebc.pc = (char *) pc; + iPtr->cmdFramePtr = bcFramePtr; + + if (iPtr->flags & INTERP_DEBUG_FRAME) { + ArgumentBCEnter(interp, codePtr, TD, pc, objc, objv); + } + + DECACHE_STACK_INFO(); + + pc += pcAdjustment; + TEBC_YIELD(); + return TclNREvalObjv(interp, objc, objv, + TCL_EVAL_NOERR | TCL_EVAL_SOURCE_IN_FRAME, NULL); + +#if TCL_SUPPORT_84_BYTECODE + case INST_CALL_BUILTIN_FUNC1: + /* + * Call one of the built-in pre-8.5 Tcl math functions. This + * translates to INST_INVOKE_STK1 with the first argument of + * ::tcl::mathfunc::$objv[0]. We need to insert the named math + * function into the stack. + */ + + opnd = TclGetUInt1AtPtr(pc+1); + if ((opnd < 0) || (opnd > LAST_BUILTIN_FUNC)) { + TRACE(("UNRECOGNIZED BUILTIN FUNC CODE %d\n", opnd)); + Tcl_Panic("TclNRExecuteByteCode: unrecognized builtin function code %d", opnd); + } + + TclNewLiteralStringObj(objPtr, "::tcl::mathfunc::"); + Tcl_AppendToObj(objPtr, tclBuiltinFuncTable[opnd].name, -1); + + /* + * Only 0, 1 or 2 args. + */ + + { + int numArgs = tclBuiltinFuncTable[opnd].numArgs; + Tcl_Obj *tmpPtr1, *tmpPtr2; + + if (numArgs == 0) { + PUSH_OBJECT(objPtr); + } else if (numArgs == 1) { + tmpPtr1 = POP_OBJECT(); + PUSH_OBJECT(objPtr); + PUSH_OBJECT(tmpPtr1); + Tcl_DecrRefCount(tmpPtr1); + } else { + tmpPtr2 = POP_OBJECT(); + tmpPtr1 = POP_OBJECT(); + PUSH_OBJECT(objPtr); + PUSH_OBJECT(tmpPtr1); + PUSH_OBJECT(tmpPtr2); + Tcl_DecrRefCount(tmpPtr1); + Tcl_DecrRefCount(tmpPtr2); + } + objc = numArgs + 1; + } + pcAdjustment = 2; + goto doInvocation; + + case INST_CALL_FUNC1: + /* + * Call a non-builtin Tcl math function previously registered by a + * call to Tcl_CreateMathFunc pre-8.5. This is essentially + * INST_INVOKE_STK1 converting the first arg to + * ::tcl::mathfunc::$objv[0]. + */ + + objc = TclGetUInt1AtPtr(pc+1); /* Number of arguments. The function + * name is the 0-th argument. */ + + objPtr = OBJ_AT_DEPTH(objc-1); + TclNewLiteralStringObj(tmpPtr, "::tcl::mathfunc::"); + Tcl_AppendObjToObj(tmpPtr, objPtr); + Tcl_DecrRefCount(objPtr); + + /* + * Variation of PUSH_OBJECT. + */ + + OBJ_AT_DEPTH(objc-1) = tmpPtr; + Tcl_IncrRefCount(tmpPtr); + + pcAdjustment = 2; + goto doInvocation; +#else + /* + * INST_CALL_BUILTIN_FUNC1 and INST_CALL_FUNC1 were made obsolete by the + * changes to add a ::tcl::mathfunc namespace in 8.5. Optional support + * remains for existing bytecode precompiled files. + */ + + case INST_CALL_BUILTIN_FUNC1: + Tcl_Panic("TclNRExecuteByteCode: obsolete INST_CALL_BUILTIN_FUNC1 found"); + case INST_CALL_FUNC1: + Tcl_Panic("TclNRExecuteByteCode: obsolete INST_CALL_FUNC1 found"); +#endif + + case INST_INVOKE_REPLACE: + objc = TclGetUInt4AtPtr(pc+1); + opnd = TclGetUInt1AtPtr(pc+5); + objPtr = POP_OBJECT(); + objv = &OBJ_AT_DEPTH(objc-1); + cleanup = objc; +#ifdef TCL_COMPILE_DEBUG + if (tclTraceExec >= 2) { + int i; + + if (traceInstructions) { + strncpy(cmdNameBuf, TclGetString(objv[0]), 20); + TRACE(("%u => call (implementation %s) ", objc, O2S(objPtr))); + } else { + fprintf(stdout, + "%d: (%u) invoking (using implementation %s) ", + iPtr->numLevels, (unsigned)(pc - codePtr->codeStart), + O2S(objPtr)); + } + for (i = 0; i < objc; i++) { + if (i < opnd) { + fprintf(stdout, "<"); + TclPrintObject(stdout, objv[i], 15); + fprintf(stdout, ">"); + } else { + TclPrintObject(stdout, objv[i], 15); + } + fprintf(stdout, " "); + } + fprintf(stdout, "\n"); + fflush(stdout); + } +#endif /*TCL_COMPILE_DEBUG*/ + + bcFramePtr->data.tebc.pc = (char *) pc; + iPtr->cmdFramePtr = bcFramePtr; + if (iPtr->flags & INTERP_DEBUG_FRAME) { + ArgumentBCEnter(interp, codePtr, TD, pc, objc, objv); + } + + TclInitRewriteEnsemble(interp, opnd, 1, objv); + + { + Tcl_Obj *copyPtr = Tcl_NewListObj(objc - opnd + 1, NULL); + + Tcl_ListObjAppendElement(NULL, copyPtr, objPtr); + Tcl_ListObjReplace(NULL, copyPtr, LIST_MAX, 0, + objc - opnd, objv + opnd); + Tcl_DecrRefCount(objPtr); + objPtr = copyPtr; + } + + DECACHE_STACK_INFO(); + pc += 6; + TEBC_YIELD(); + + TclMarkTailcall(interp); + TclNRAddCallback(interp, TclClearRootEnsemble, NULL, NULL, NULL, NULL); + Tcl_ListObjGetElements(NULL, objPtr, &objc, &objv); + TclNRAddCallback(interp, TclNRReleaseValues, objPtr, NULL, NULL, NULL); + return TclNREvalObjv(interp, objc, objv, TCL_EVAL_INVOKE, NULL); + + /* + * ----------------------------------------------------------------- + * Start of INST_LOAD instructions. + * + * WARNING: more 'goto' here than your doctor recommended! The different + * instructions set the value of some variables and then jump to some + * common execution code. + */ + + case INST_LOAD_SCALAR1: + instLoadScalar1: + opnd = TclGetUInt1AtPtr(pc+1); + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u => ", opnd)); + if (TclIsVarDirectReadable(varPtr)) { + /* + * No errors, no traces: just get the value. + */ + + objResultPtr = varPtr->value.objPtr; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(2, 0, 1); + } + pcAdjustment = 2; + cleanup = 0; + arrayPtr = NULL; + part1Ptr = part2Ptr = NULL; + goto doCallPtrGetVar; + + case INST_LOAD_SCALAR4: + opnd = TclGetUInt4AtPtr(pc+1); + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u => ", opnd)); + if (TclIsVarDirectReadable(varPtr)) { + /* + * No errors, no traces: just get the value. + */ + + objResultPtr = varPtr->value.objPtr; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(5, 0, 1); + } + pcAdjustment = 5; + cleanup = 0; + arrayPtr = NULL; + part1Ptr = part2Ptr = NULL; + goto doCallPtrGetVar; + + case INST_LOAD_ARRAY4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + goto doLoadArray; + + case INST_LOAD_ARRAY1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + + doLoadArray: + part1Ptr = NULL; + part2Ptr = OBJ_AT_TOS; + arrayPtr = LOCAL(opnd); + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + TRACE(("%u \"%.30s\" => ", opnd, O2S(part2Ptr))); + if (TclIsVarArray(arrayPtr) && !ReadTraced(arrayPtr)) { + varPtr = VarHashFindVar(arrayPtr->value.tablePtr, part2Ptr); + if (varPtr && TclIsVarDirectReadable(varPtr)) { + /* + * No errors, no traces: just get the value. + */ + + objResultPtr = varPtr->value.objPtr; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(pcAdjustment, 1, 1); + } + } + varPtr = TclLookupArrayElement(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "read", 0, 1, arrayPtr, opnd); + if (varPtr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + cleanup = 1; + goto doCallPtrGetVar; + + case INST_LOAD_ARRAY_STK: + cleanup = 2; + part2Ptr = OBJ_AT_TOS; /* element name */ + objPtr = OBJ_UNDER_TOS; /* array name */ + TRACE(("\"%.30s(%.30s)\" => ", O2S(objPtr), O2S(part2Ptr))); + goto doLoadStk; + + case INST_LOAD_STK: + case INST_LOAD_SCALAR_STK: + cleanup = 1; + part2Ptr = NULL; + objPtr = OBJ_AT_TOS; /* variable name */ + TRACE(("\"%.30s\" => ", O2S(objPtr))); + + doLoadStk: + part1Ptr = objPtr; + varPtr = TclObjLookupVarEx(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "read", /*createPart1*/0, /*createPart2*/1, + &arrayPtr); + if (!varPtr) { + TRACE_ERROR(interp); + goto gotError; + } + + if (TclIsVarDirectReadable2(varPtr, arrayPtr)) { + /* + * No errors, no traces: just get the value. + */ + + objResultPtr = varPtr->value.objPtr; + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(1, cleanup, 1); + } + pcAdjustment = 1; + opnd = -1; + + doCallPtrGetVar: + /* + * There are either errors or the variable is traced: call + * TclPtrGetVar to process fully. + */ + + DECACHE_STACK_INFO(); + objResultPtr = TclPtrGetVar(interp, varPtr, arrayPtr, + part1Ptr, part2Ptr, TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + if (!objResultPtr) { + TRACE_ERROR(interp); + goto gotError; + } + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(pcAdjustment, cleanup, 1); + + /* + * End of INST_LOAD instructions. + * ----------------------------------------------------------------- + * Start of INST_STORE and related instructions. + * + * WARNING: more 'goto' here than your doctor recommended! The different + * instructions set the value of some variables and then jump to somme + * common execution code. + */ + + { + int storeFlags, len; + + case INST_STORE_ARRAY4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + goto doStoreArrayDirect; + + case INST_STORE_ARRAY1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + + doStoreArrayDirect: + valuePtr = OBJ_AT_TOS; + part2Ptr = OBJ_UNDER_TOS; + arrayPtr = LOCAL(opnd); + TRACE(("%u \"%.30s\" <- \"%.30s\" => ", opnd, O2S(part2Ptr), + O2S(valuePtr))); + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + if (TclIsVarArray(arrayPtr) && !WriteTraced(arrayPtr)) { + varPtr = VarHashFindVar(arrayPtr->value.tablePtr, part2Ptr); + if (varPtr && TclIsVarDirectWritable(varPtr)) { + tosPtr--; + Tcl_DecrRefCount(OBJ_AT_TOS); + OBJ_AT_TOS = valuePtr; + goto doStoreVarDirect; + } + } + cleanup = 2; + storeFlags = TCL_LEAVE_ERR_MSG; + part1Ptr = NULL; + goto doStoreArrayDirectFailed; + + case INST_STORE_SCALAR4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + goto doStoreScalarDirect; + + case INST_STORE_SCALAR1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + + doStoreScalarDirect: + valuePtr = OBJ_AT_TOS; + varPtr = LOCAL(opnd); + TRACE(("%u <- \"%.30s\" => ", opnd, O2S(valuePtr))); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + if (!TclIsVarDirectWritable(varPtr)) { + storeFlags = TCL_LEAVE_ERR_MSG; + part1Ptr = NULL; + goto doStoreScalar; + } + + /* + * No traces, no errors, plain 'set': we can safely inline. The value + * *will* be set to what's requested, so that the stack top remains + * pointing to the same Tcl_Obj. + */ + + doStoreVarDirect: + valuePtr = varPtr->value.objPtr; + if (valuePtr != NULL) { + TclDecrRefCount(valuePtr); + } + objResultPtr = OBJ_AT_TOS; + varPtr->value.objPtr = objResultPtr; +#ifndef TCL_COMPILE_DEBUG + if (*(pc+pcAdjustment) == INST_POP) { + tosPtr--; + NEXT_INST_F((pcAdjustment+1), 0, 0); + } +#else + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); +#endif + Tcl_IncrRefCount(objResultPtr); + NEXT_INST_F(pcAdjustment, 0, 0); + + case INST_LAPPEND_STK: + valuePtr = OBJ_AT_TOS; /* value to append */ + part2Ptr = NULL; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); + goto doStoreStk; + + case INST_LAPPEND_ARRAY_STK: + valuePtr = OBJ_AT_TOS; /* value to append */ + part2Ptr = OBJ_UNDER_TOS; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); + goto doStoreStk; + + case INST_APPEND_STK: + valuePtr = OBJ_AT_TOS; /* value to append */ + part2Ptr = NULL; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); + goto doStoreStk; + + case INST_APPEND_ARRAY_STK: + valuePtr = OBJ_AT_TOS; /* value to append */ + part2Ptr = OBJ_UNDER_TOS; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); + goto doStoreStk; + + case INST_STORE_ARRAY_STK: + valuePtr = OBJ_AT_TOS; + part2Ptr = OBJ_UNDER_TOS; + storeFlags = TCL_LEAVE_ERR_MSG; + goto doStoreStk; + + case INST_STORE_STK: + case INST_STORE_SCALAR_STK: + valuePtr = OBJ_AT_TOS; + part2Ptr = NULL; + storeFlags = TCL_LEAVE_ERR_MSG; + + doStoreStk: + objPtr = OBJ_AT_DEPTH(1 + (part2Ptr != NULL)); /* variable name */ + part1Ptr = objPtr; +#ifdef TCL_COMPILE_DEBUG + if (part2Ptr == NULL) { + TRACE(("\"%.30s\" <- \"%.30s\" =>", O2S(part1Ptr),O2S(valuePtr))); + } else { + TRACE(("\"%.30s(%.30s)\" <- \"%.30s\" => ", + O2S(part1Ptr), O2S(part2Ptr), O2S(valuePtr))); + } +#endif + varPtr = TclObjLookupVarEx(interp, objPtr,part2Ptr, TCL_LEAVE_ERR_MSG, + "set", /*createPart1*/ 1, /*createPart2*/ 1, &arrayPtr); + if (!varPtr) { + TRACE_ERROR(interp); + goto gotError; + } + cleanup = ((part2Ptr == NULL)? 2 : 3); + pcAdjustment = 1; + opnd = -1; + goto doCallPtrSetVar; + + case INST_LAPPEND_ARRAY4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); + goto doStoreArray; + + case INST_LAPPEND_ARRAY1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); + goto doStoreArray; + + case INST_APPEND_ARRAY4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); + goto doStoreArray; + + case INST_APPEND_ARRAY1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); + goto doStoreArray; + + doStoreArray: + valuePtr = OBJ_AT_TOS; + part2Ptr = OBJ_UNDER_TOS; + arrayPtr = LOCAL(opnd); + TRACE(("%u \"%.30s\" <- \"%.30s\" => ", opnd, O2S(part2Ptr), + O2S(valuePtr))); + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + cleanup = 2; + part1Ptr = NULL; + + doStoreArrayDirectFailed: + varPtr = TclLookupArrayElement(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "set", 1, 1, arrayPtr, opnd); + if (!varPtr) { + TRACE_ERROR(interp); + goto gotError; + } + goto doCallPtrSetVar; + + case INST_LAPPEND_SCALAR4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); + goto doStoreScalar; + + case INST_LAPPEND_SCALAR1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE + | TCL_LIST_ELEMENT); + goto doStoreScalar; + + case INST_APPEND_SCALAR4: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); + goto doStoreScalar; + + case INST_APPEND_SCALAR1: + opnd = TclGetUInt1AtPtr(pc+1); + pcAdjustment = 2; + storeFlags = (TCL_LEAVE_ERR_MSG | TCL_APPEND_VALUE); + goto doStoreScalar; + + doStoreScalar: + valuePtr = OBJ_AT_TOS; + varPtr = LOCAL(opnd); + TRACE(("%u <- \"%.30s\" => ", opnd, O2S(valuePtr))); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + cleanup = 1; + arrayPtr = NULL; + part1Ptr = part2Ptr = NULL; + + doCallPtrSetVar: + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, arrayPtr, + part1Ptr, part2Ptr, valuePtr, storeFlags, opnd); + CACHE_STACK_INFO(); + if (!objResultPtr) { + TRACE_ERROR(interp); + goto gotError; + } +#ifndef TCL_COMPILE_DEBUG + if (*(pc+pcAdjustment) == INST_POP) { + NEXT_INST_V((pcAdjustment+1), cleanup, 0); + } +#endif + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(pcAdjustment, cleanup, 1); + + case INST_LAPPEND_LIST: + opnd = TclGetUInt4AtPtr(pc+1); + valuePtr = OBJ_AT_TOS; + varPtr = LOCAL(opnd); + cleanup = 1; + pcAdjustment = 5; + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u <- \"%.30s\" => ", opnd, O2S(valuePtr))); + if (TclListObjGetElements(interp, valuePtr, &objc, &objv) + != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + if (TclIsVarDirectReadable(varPtr) + && TclIsVarDirectWritable(varPtr)) { + goto lappendListDirect; + } + arrayPtr = NULL; + part1Ptr = part2Ptr = NULL; + goto lappendListPtr; + + case INST_LAPPEND_LIST_ARRAY: + opnd = TclGetUInt4AtPtr(pc+1); + valuePtr = OBJ_AT_TOS; + part1Ptr = NULL; + part2Ptr = OBJ_UNDER_TOS; + arrayPtr = LOCAL(opnd); + cleanup = 2; + pcAdjustment = 5; + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + TRACE(("%u \"%.30s\" \"%.30s\" => ", + opnd, O2S(part2Ptr), O2S(valuePtr))); + if (TclListObjGetElements(interp, valuePtr, &objc, &objv) + != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + if (TclIsVarArray(arrayPtr) && !ReadTraced(arrayPtr) + && !WriteTraced(arrayPtr)) { + varPtr = VarHashFindVar(arrayPtr->value.tablePtr, part2Ptr); + if (varPtr && TclIsVarDirectReadable(varPtr) + && TclIsVarDirectWritable(varPtr)) { + goto lappendListDirect; + } + } + varPtr = TclLookupArrayElement(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "set", 1, 1, arrayPtr, opnd); + if (varPtr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + goto lappendListPtr; + + case INST_LAPPEND_LIST_ARRAY_STK: + pcAdjustment = 1; + cleanup = 3; + valuePtr = OBJ_AT_TOS; + part2Ptr = OBJ_UNDER_TOS; /* element name */ + part1Ptr = OBJ_AT_DEPTH(2); /* array name */ + TRACE(("\"%.30s(%.30s)\" \"%.30s\" => ", + O2S(part1Ptr), O2S(part2Ptr), O2S(valuePtr))); + goto lappendList; + + case INST_LAPPEND_LIST_STK: + pcAdjustment = 1; + cleanup = 2; + valuePtr = OBJ_AT_TOS; + part2Ptr = NULL; + part1Ptr = OBJ_UNDER_TOS; /* variable name */ + TRACE(("\"%.30s\" \"%.30s\" => ", O2S(part1Ptr), O2S(valuePtr))); + goto lappendList; + + lappendListDirect: + objResultPtr = varPtr->value.objPtr; + if (TclListObjLength(interp, objResultPtr, &len) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + if (Tcl_IsShared(objResultPtr)) { + Tcl_Obj *newValue = Tcl_DuplicateObj(objResultPtr); + + TclDecrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr = newValue; + Tcl_IncrRefCount(newValue); + } + if (Tcl_ListObjReplace(interp, objResultPtr, len, 0, objc, objv) + != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(pcAdjustment, cleanup, 1); + + lappendList: + opnd = -1; + if (TclListObjGetElements(interp, valuePtr, &objc, &objv) + != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + DECACHE_STACK_INFO(); + varPtr = TclObjLookupVarEx(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "set", 1, 1, &arrayPtr); + CACHE_STACK_INFO(); + if (!varPtr) { + TRACE_ERROR(interp); + goto gotError; + } + + lappendListPtr: + if (TclIsVarInHash(varPtr)) { + VarHashRefCount(varPtr)++; + } + if (arrayPtr && TclIsVarInHash(arrayPtr)) { + VarHashRefCount(arrayPtr)++; + } + DECACHE_STACK_INFO(); + objResultPtr = TclPtrGetVar(interp, varPtr, arrayPtr, + part1Ptr, part2Ptr, TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + if (TclIsVarInHash(varPtr)) { + VarHashRefCount(varPtr)--; + } + if (arrayPtr && TclIsVarInHash(arrayPtr)) { + VarHashRefCount(arrayPtr)--; + } + + { + int createdNewObj = 0; + + if (!objResultPtr) { + objResultPtr = valuePtr; + } else if (TclListObjLength(interp, objResultPtr, &len)!=TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } else { + if (Tcl_IsShared(objResultPtr)) { + objResultPtr = Tcl_DuplicateObj(objResultPtr); + createdNewObj = 1; + } + if (Tcl_ListObjReplace(interp, objResultPtr, len,0, objc,objv) + != TCL_OK) { + goto errorInLappendListPtr; + } + } + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, arrayPtr, part1Ptr, + part2Ptr, objResultPtr, TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + if (!objResultPtr) { + errorInLappendListPtr: + if (createdNewObj) { + TclDecrRefCount(objResultPtr); + } + TRACE_ERROR(interp); + goto gotError; + } + } + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(pcAdjustment, cleanup, 1); + } + + /* + * End of INST_STORE and related instructions. + * ----------------------------------------------------------------- + * Start of INST_INCR instructions. + * + * WARNING: more 'goto' here than your doctor recommended! The different + * instructions set the value of some variables and then jump to somme + * common execution code. + */ + +/*TODO: Consider more untangling here; merge with LOAD and STORE ? */ + + { + Tcl_Obj *incrPtr; +#ifndef TCL_WIDE_INT_IS_LONG + Tcl_WideInt w; +#endif + long increment; + + case INST_INCR_SCALAR1: + case INST_INCR_ARRAY1: + case INST_INCR_ARRAY_STK: + case INST_INCR_SCALAR_STK: + case INST_INCR_STK: + opnd = TclGetUInt1AtPtr(pc+1); + incrPtr = POP_OBJECT(); + switch (*pc) { + case INST_INCR_SCALAR1: + pcAdjustment = 2; + goto doIncrScalar; + case INST_INCR_ARRAY1: + pcAdjustment = 2; + goto doIncrArray; + default: + pcAdjustment = 1; + goto doIncrStk; + } + + case INST_INCR_ARRAY_STK_IMM: + case INST_INCR_SCALAR_STK_IMM: + case INST_INCR_STK_IMM: + increment = TclGetInt1AtPtr(pc+1); + incrPtr = Tcl_NewIntObj(increment); + Tcl_IncrRefCount(incrPtr); + pcAdjustment = 2; + + doIncrStk: + if ((*pc == INST_INCR_ARRAY_STK_IMM) + || (*pc == INST_INCR_ARRAY_STK)) { + part2Ptr = OBJ_AT_TOS; + objPtr = OBJ_UNDER_TOS; + TRACE(("\"%.30s(%.30s)\" (by %ld) => ", + O2S(objPtr), O2S(part2Ptr), increment)); + } else { + part2Ptr = NULL; + objPtr = OBJ_AT_TOS; + TRACE(("\"%.30s\" (by %ld) => ", O2S(objPtr), increment)); + } + part1Ptr = objPtr; + opnd = -1; + varPtr = TclObjLookupVarEx(interp, objPtr, part2Ptr, + TCL_LEAVE_ERR_MSG, "read", 1, 1, &arrayPtr); + if (!varPtr) { + DECACHE_STACK_INFO(); + Tcl_AddErrorInfo(interp, + "\n (reading value of variable to increment)"); + CACHE_STACK_INFO(); + TRACE_ERROR(interp); + Tcl_DecrRefCount(incrPtr); + goto gotError; + } + cleanup = ((part2Ptr == NULL)? 1 : 2); + goto doIncrVar; + + case INST_INCR_ARRAY1_IMM: + opnd = TclGetUInt1AtPtr(pc+1); + increment = TclGetInt1AtPtr(pc+2); + incrPtr = Tcl_NewIntObj(increment); + Tcl_IncrRefCount(incrPtr); + pcAdjustment = 3; + + doIncrArray: + part1Ptr = NULL; + part2Ptr = OBJ_AT_TOS; + arrayPtr = LOCAL(opnd); + cleanup = 1; + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + TRACE(("%u \"%.30s\" (by %ld) => ", opnd, O2S(part2Ptr), increment)); + varPtr = TclLookupArrayElement(interp, part1Ptr, part2Ptr, + TCL_LEAVE_ERR_MSG, "read", 1, 1, arrayPtr, opnd); + if (!varPtr) { + TRACE_ERROR(interp); + Tcl_DecrRefCount(incrPtr); + goto gotError; + } + goto doIncrVar; + + case INST_INCR_SCALAR1_IMM: + opnd = TclGetUInt1AtPtr(pc+1); + increment = TclGetInt1AtPtr(pc+2); + pcAdjustment = 3; + cleanup = 0; + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + + if (TclIsVarDirectModifyable(varPtr)) { + ClientData ptr; + int type; + + objPtr = varPtr->value.objPtr; + if (GetNumberFromObj(NULL, objPtr, &ptr, &type) == TCL_OK) { + if (type == TCL_NUMBER_LONG) { + long augend = *((const long *)ptr); + long sum = augend + increment; + + /* + * Overflow when (augend and sum have different sign) and + * (augend and increment have the same sign). This is + * encapsulated in the Overflowing macro. + */ + + if (!Overflowing(augend, increment, sum)) { + TRACE(("%u %ld => ", opnd, increment)); + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared. */ + TclNewLongObj(objResultPtr, sum); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + TclSetLongObj(objPtr, sum); + } + goto doneIncr; + } +#ifndef TCL_WIDE_INT_IS_LONG + w = (Tcl_WideInt)augend; + + TRACE(("%u %ld => ", opnd, increment)); + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared. */ + objResultPtr = Tcl_NewWideIntObj(w+increment); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + + /* + * We know the sum value is outside the long range; + * use macro form that doesn't range test again. + */ + + TclSetWideIntObj(objPtr, w+increment); + } + goto doneIncr; +#endif + } /* end if (type == TCL_NUMBER_LONG) */ +#ifndef TCL_WIDE_INT_IS_LONG + if (type == TCL_NUMBER_WIDE) { + Tcl_WideInt sum; + + w = *((const Tcl_WideInt *) ptr); + sum = w + increment; + + /* + * Check for overflow. + */ + + if (!Overflowing(w, increment, sum)) { + TRACE(("%u %ld => ", opnd, increment)); + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared. */ + objResultPtr = Tcl_NewWideIntObj(sum); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + + /* + * We *do not* know the sum value is outside the + * long range (wide + long can yield long); use + * the function call that checks range. + */ + + Tcl_SetWideIntObj(objPtr, sum); + } + goto doneIncr; + } + } +#endif + } + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared */ + objResultPtr = Tcl_DuplicateObj(objPtr); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + } + TclNewLongObj(incrPtr, increment); + if (TclIncrObj(interp, objResultPtr, incrPtr) != TCL_OK) { + Tcl_DecrRefCount(incrPtr); + TRACE_ERROR(interp); + goto gotError; + } + Tcl_DecrRefCount(incrPtr); + goto doneIncr; + } + + /* + * All other cases, flow through to generic handling. + */ + + TclNewLongObj(incrPtr, increment); + Tcl_IncrRefCount(incrPtr); + + doIncrScalar: + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + arrayPtr = NULL; + part1Ptr = part2Ptr = NULL; + cleanup = 0; + TRACE(("%u %s => ", opnd, Tcl_GetString(incrPtr))); + + doIncrVar: + if (TclIsVarDirectModifyable2(varPtr, arrayPtr)) { + objPtr = varPtr->value.objPtr; + if (Tcl_IsShared(objPtr)) { + objPtr->refCount--; /* We know it's shared */ + objResultPtr = Tcl_DuplicateObj(objPtr); + Tcl_IncrRefCount(objResultPtr); + varPtr->value.objPtr = objResultPtr; + } else { + objResultPtr = objPtr; + } + if (TclIncrObj(interp, objResultPtr, incrPtr) != TCL_OK) { + Tcl_DecrRefCount(incrPtr); + TRACE_ERROR(interp); + goto gotError; + } + Tcl_DecrRefCount(incrPtr); + } else { + DECACHE_STACK_INFO(); + objResultPtr = TclPtrIncrObjVar(interp, varPtr, arrayPtr, + part1Ptr, part2Ptr, incrPtr, TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + Tcl_DecrRefCount(incrPtr); + if (objResultPtr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + } + doneIncr: + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); +#ifndef TCL_COMPILE_DEBUG + if (*(pc+pcAdjustment) == INST_POP) { + NEXT_INST_V((pcAdjustment+1), cleanup, 0); + } +#endif + NEXT_INST_V(pcAdjustment, cleanup, 1); + } + + /* + * End of INST_INCR instructions. + * ----------------------------------------------------------------- + * Start of INST_EXIST instructions. + */ + + case INST_EXIST_SCALAR: + cleanup = 0; + pcAdjustment = 5; + opnd = TclGetUInt4AtPtr(pc+1); + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u => ", opnd)); + if (ReadTraced(varPtr)) { + DECACHE_STACK_INFO(); + TclObjCallVarTraces(iPtr, NULL, varPtr, NULL, NULL, + TCL_TRACE_READS, 0, opnd); + CACHE_STACK_INFO(); + if (TclIsVarUndefined(varPtr)) { + TclCleanupVar(varPtr, NULL); + varPtr = NULL; + } + } + goto afterExistsPeephole; + + case INST_EXIST_ARRAY: + cleanup = 1; + pcAdjustment = 5; + opnd = TclGetUInt4AtPtr(pc+1); + part2Ptr = OBJ_AT_TOS; + arrayPtr = LOCAL(opnd); + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + TRACE(("%u \"%.30s\" => ", opnd, O2S(part2Ptr))); + if (TclIsVarArray(arrayPtr) && !ReadTraced(arrayPtr)) { + varPtr = VarHashFindVar(arrayPtr->value.tablePtr, part2Ptr); + if (!varPtr || !ReadTraced(varPtr)) { + goto afterExistsPeephole; + } + } + varPtr = TclLookupArrayElement(interp, NULL, part2Ptr, 0, "access", + 0, 1, arrayPtr, opnd); + if (varPtr) { + if (ReadTraced(varPtr) || (arrayPtr && ReadTraced(arrayPtr))) { + DECACHE_STACK_INFO(); + TclObjCallVarTraces(iPtr, arrayPtr, varPtr, NULL, part2Ptr, + TCL_TRACE_READS, 0, opnd); + CACHE_STACK_INFO(); + } + if (TclIsVarUndefined(varPtr)) { + TclCleanupVar(varPtr, arrayPtr); + varPtr = NULL; + } + } + goto afterExistsPeephole; + + case INST_EXIST_ARRAY_STK: + cleanup = 2; + pcAdjustment = 1; + part2Ptr = OBJ_AT_TOS; /* element name */ + part1Ptr = OBJ_UNDER_TOS; /* array name */ + TRACE(("\"%.30s(%.30s)\" => ", O2S(part1Ptr), O2S(part2Ptr))); + goto doExistStk; + + case INST_EXIST_STK: + cleanup = 1; + pcAdjustment = 1; + part2Ptr = NULL; + part1Ptr = OBJ_AT_TOS; /* variable name */ + TRACE(("\"%.30s\" => ", O2S(part1Ptr))); + + doExistStk: + varPtr = TclObjLookupVarEx(interp, part1Ptr, part2Ptr, 0, "access", + /*createPart1*/0, /*createPart2*/1, &arrayPtr); + if (varPtr) { + if (ReadTraced(varPtr) || (arrayPtr && ReadTraced(arrayPtr))) { + DECACHE_STACK_INFO(); + TclObjCallVarTraces(iPtr, arrayPtr, varPtr, part1Ptr,part2Ptr, + TCL_TRACE_READS, 0, -1); + CACHE_STACK_INFO(); + } + if (TclIsVarUndefined(varPtr)) { + TclCleanupVar(varPtr, arrayPtr); + varPtr = NULL; + } + } + + /* + * Peep-hole optimisation: if you're about to jump, do jump from here. + */ + + afterExistsPeephole: { + int found = (varPtr && !TclIsVarUndefined(varPtr)); + + TRACE_APPEND(("%d\n", found ? 1 : 0)); + JUMP_PEEPHOLE_V(found, pcAdjustment, cleanup); + } + + /* + * End of INST_EXIST instructions. + * ----------------------------------------------------------------- + * Start of INST_UNSET instructions. + */ + + { + int flags; + + case INST_UNSET_SCALAR: + flags = TclGetUInt1AtPtr(pc+1) ? TCL_LEAVE_ERR_MSG : 0; + opnd = TclGetUInt4AtPtr(pc+2); + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%s %u => ", (flags ? "normal" : "noerr"), opnd)); + if (TclIsVarDirectUnsettable(varPtr) && !TclIsVarInHash(varPtr)) { + /* + * No errors, no traces, no searches: just make the variable cease + * to exist. + */ + + if (!TclIsVarUndefined(varPtr)) { + TclDecrRefCount(varPtr->value.objPtr); + } else if (flags & TCL_LEAVE_ERR_MSG) { + goto slowUnsetScalar; + } + varPtr->value.objPtr = NULL; + TRACE_APPEND(("OK\n")); + NEXT_INST_F(6, 0, 0); + } + + slowUnsetScalar: + DECACHE_STACK_INFO(); + if (TclPtrUnsetVar(interp, varPtr, NULL, NULL, NULL, flags, + opnd) != TCL_OK && flags) { + goto errorInUnset; + } + CACHE_STACK_INFO(); + NEXT_INST_F(6, 0, 0); + + case INST_UNSET_ARRAY: + flags = TclGetUInt1AtPtr(pc+1) ? TCL_LEAVE_ERR_MSG : 0; + opnd = TclGetUInt4AtPtr(pc+2); + part2Ptr = OBJ_AT_TOS; + arrayPtr = LOCAL(opnd); + while (TclIsVarLink(arrayPtr)) { + arrayPtr = arrayPtr->value.linkPtr; + } + TRACE(("%s %u \"%.30s\" => ", + (flags ? "normal" : "noerr"), opnd, O2S(part2Ptr))); + if (TclIsVarArray(arrayPtr) && !UnsetTraced(arrayPtr)) { + varPtr = VarHashFindVar(arrayPtr->value.tablePtr, part2Ptr); + if (varPtr && TclIsVarDirectUnsettable(varPtr)) { + /* + * No nasty traces and element exists, so we can proceed to + * unset it. Might still not exist though... + */ + + if (!TclIsVarUndefined(varPtr)) { + TclDecrRefCount(varPtr->value.objPtr); + TclSetVarUndefined(varPtr); + TclClearVarNamespaceVar(varPtr); + TclCleanupVar(varPtr, arrayPtr); + } else if (flags & TCL_LEAVE_ERR_MSG) { + goto slowUnsetArray; + } + TRACE_APPEND(("OK\n")); + NEXT_INST_F(6, 1, 0); + } else if (!varPtr && !(flags & TCL_LEAVE_ERR_MSG)) { + /* + * Don't need to do anything here. + */ + + TRACE_APPEND(("OK\n")); + NEXT_INST_F(6, 1, 0); + } + } + slowUnsetArray: + DECACHE_STACK_INFO(); + varPtr = TclLookupArrayElement(interp, NULL, part2Ptr, flags, "unset", + 0, 0, arrayPtr, opnd); + if (!varPtr) { + if (flags & TCL_LEAVE_ERR_MSG) { + goto errorInUnset; + } + } else if (TclPtrUnsetVar(interp, varPtr, arrayPtr, NULL, part2Ptr, + flags, opnd) != TCL_OK && (flags & TCL_LEAVE_ERR_MSG)) { + goto errorInUnset; + } + CACHE_STACK_INFO(); + NEXT_INST_F(6, 1, 0); + + case INST_UNSET_ARRAY_STK: + flags = TclGetUInt1AtPtr(pc+1) ? TCL_LEAVE_ERR_MSG : 0; + cleanup = 2; + part2Ptr = OBJ_AT_TOS; /* element name */ + part1Ptr = OBJ_UNDER_TOS; /* array name */ + TRACE(("%s \"%.30s(%.30s)\" => ", (flags ? "normal" : "noerr"), + O2S(part1Ptr), O2S(part2Ptr))); + goto doUnsetStk; + + case INST_UNSET_STK: + flags = TclGetUInt1AtPtr(pc+1) ? TCL_LEAVE_ERR_MSG : 0; + cleanup = 1; + part2Ptr = NULL; + part1Ptr = OBJ_AT_TOS; /* variable name */ + TRACE(("%s \"%.30s\" => ", (flags ? "normal" : "noerr"), + O2S(part1Ptr))); + + doUnsetStk: + DECACHE_STACK_INFO(); + if (TclObjUnsetVar2(interp, part1Ptr, part2Ptr, flags) != TCL_OK + && (flags & TCL_LEAVE_ERR_MSG)) { + goto errorInUnset; + } + CACHE_STACK_INFO(); + TRACE_APPEND(("OK\n")); + NEXT_INST_V(2, cleanup, 0); + + errorInUnset: + CACHE_STACK_INFO(); + TRACE_ERROR(interp); + goto gotError; + + /* + * This is really an unset operation these days. Do not issue. + */ + + case INST_DICT_DONE: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => OK\n", opnd)); + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + if (TclIsVarDirectUnsettable(varPtr) && !TclIsVarInHash(varPtr)) { + if (!TclIsVarUndefined(varPtr)) { + TclDecrRefCount(varPtr->value.objPtr); + } + varPtr->value.objPtr = NULL; + } else { + DECACHE_STACK_INFO(); + TclPtrUnsetVar(interp, varPtr, NULL, NULL, NULL, 0, opnd); + CACHE_STACK_INFO(); + } + NEXT_INST_F(5, 0, 0); + } + + /* + * End of INST_UNSET instructions. + * ----------------------------------------------------------------- + * Start of INST_ARRAY instructions. + */ + + case INST_ARRAY_EXISTS_IMM: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + cleanup = 0; + part1Ptr = NULL; + arrayPtr = NULL; + TRACE(("%u => ", opnd)); + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + goto doArrayExists; + case INST_ARRAY_EXISTS_STK: + opnd = -1; + pcAdjustment = 1; + cleanup = 1; + part1Ptr = OBJ_AT_TOS; + TRACE(("\"%.30s\" => ", O2S(part1Ptr))); + varPtr = TclObjLookupVarEx(interp, part1Ptr, NULL, 0, NULL, + /*createPart1*/0, /*createPart2*/0, &arrayPtr); + doArrayExists: + if (varPtr && (varPtr->flags & VAR_TRACED_ARRAY) + && (TclIsVarArray(varPtr) || TclIsVarUndefined(varPtr))) { + DECACHE_STACK_INFO(); + result = TclObjCallVarTraces(iPtr, arrayPtr, varPtr, part1Ptr, + NULL, (TCL_LEAVE_ERR_MSG|TCL_NAMESPACE_ONLY| + TCL_GLOBAL_ONLY|TCL_TRACE_ARRAY), 1, opnd); + CACHE_STACK_INFO(); + if (result == TCL_ERROR) { + TRACE_ERROR(interp); + goto gotError; + } + } + if (varPtr && TclIsVarArray(varPtr) && !TclIsVarUndefined(varPtr)) { + objResultPtr = TCONST(1); + } else { + objResultPtr = TCONST(0); + } + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(pcAdjustment, cleanup, 1); + + case INST_ARRAY_MAKE_IMM: + opnd = TclGetUInt4AtPtr(pc+1); + pcAdjustment = 5; + cleanup = 0; + part1Ptr = NULL; + arrayPtr = NULL; + TRACE(("%u => ", opnd)); + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + goto doArrayMake; + case INST_ARRAY_MAKE_STK: + opnd = -1; + pcAdjustment = 1; + cleanup = 1; + part1Ptr = OBJ_AT_TOS; + TRACE(("\"%.30s\" => ", O2S(part1Ptr))); + varPtr = TclObjLookupVarEx(interp, part1Ptr, NULL, TCL_LEAVE_ERR_MSG, + "set", /*createPart1*/1, /*createPart2*/0, &arrayPtr); + if (varPtr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + doArrayMake: + if (varPtr && !TclIsVarArray(varPtr)) { + if (TclIsVarArrayElement(varPtr) || !TclIsVarUndefined(varPtr)) { + /* + * Either an array element, or a scalar: lose! + */ + + TclObjVarErrMsg(interp, part1Ptr, NULL, "array set", + "variable isn't array", opnd); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "WRITE", "ARRAY", NULL); + CACHE_STACK_INFO(); + TRACE_ERROR(interp); + goto gotError; + } + TclSetVarArray(varPtr); + varPtr->value.tablePtr = ckalloc(sizeof(TclVarHashTable)); + TclInitVarHashTable(varPtr->value.tablePtr, + TclGetVarNsPtr(varPtr)); +#ifdef TCL_COMPILE_DEBUG + TRACE_APPEND(("done\n")); + } else { + TRACE_APPEND(("nothing to do\n")); +#endif + } + NEXT_INST_V(pcAdjustment, cleanup, 0); + + /* + * End of INST_ARRAY instructions. + * ----------------------------------------------------------------- + * Start of variable linking instructions. + */ + + { + Var *otherPtr; + CallFrame *framePtr, *savedFramePtr; + Tcl_Namespace *nsPtr; + Namespace *savedNsPtr; + + case INST_UPVAR: + TRACE(("%d %.30s %.30s => ", TclGetInt4AtPtr(pc+1), + O2S(OBJ_UNDER_TOS), O2S(OBJ_AT_TOS))); + + if (TclObjGetFrame(interp, OBJ_UNDER_TOS, &framePtr) == -1) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Locate the other variable. + */ + + savedFramePtr = iPtr->varFramePtr; + iPtr->varFramePtr = framePtr; + otherPtr = TclObjLookupVarEx(interp, OBJ_AT_TOS, NULL, + TCL_LEAVE_ERR_MSG, "access", /*createPart1*/ 1, + /*createPart2*/ 1, &varPtr); + iPtr->varFramePtr = savedFramePtr; + if (!otherPtr) { + TRACE_ERROR(interp); + goto gotError; + } + goto doLinkVars; + + case INST_NSUPVAR: + TRACE(("%d %.30s %.30s => ", TclGetInt4AtPtr(pc+1), + O2S(OBJ_UNDER_TOS), O2S(OBJ_AT_TOS))); + if (TclGetNamespaceFromObj(interp, OBJ_UNDER_TOS, &nsPtr) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Locate the other variable. + */ + + savedNsPtr = iPtr->varFramePtr->nsPtr; + iPtr->varFramePtr->nsPtr = (Namespace *) nsPtr; + otherPtr = TclObjLookupVarEx(interp, OBJ_AT_TOS, NULL, + (TCL_NAMESPACE_ONLY|TCL_LEAVE_ERR_MSG|TCL_AVOID_RESOLVERS), + "access", /*createPart1*/ 1, /*createPart2*/ 1, &varPtr); + iPtr->varFramePtr->nsPtr = savedNsPtr; + if (!otherPtr) { + TRACE_ERROR(interp); + goto gotError; + } + goto doLinkVars; + + case INST_VARIABLE: + TRACE(("%d, %.30s => ", TclGetInt4AtPtr(pc+1), O2S(OBJ_AT_TOS))); + otherPtr = TclObjLookupVarEx(interp, OBJ_AT_TOS, NULL, + (TCL_NAMESPACE_ONLY | TCL_LEAVE_ERR_MSG), "access", + /*createPart1*/ 1, /*createPart2*/ 1, &varPtr); + if (!otherPtr) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Do the [variable] magic. + */ + + TclSetVarNamespaceVar(otherPtr); + + doLinkVars: + + /* + * If we are here, the local variable has already been created: do the + * little work of TclPtrMakeUpvar that remains to be done right here + * if there are no errors; otherwise, let it handle the case. + */ + + opnd = TclGetInt4AtPtr(pc+1); + varPtr = LOCAL(opnd); + if ((varPtr != otherPtr) && !TclIsVarTraced(varPtr) + && (TclIsVarUndefined(varPtr) || TclIsVarLink(varPtr))) { + if (!TclIsVarUndefined(varPtr)) { + /* + * Then it is a defined link. + */ + + Var *linkPtr = varPtr->value.linkPtr; + + if (linkPtr == otherPtr) { + TRACE_APPEND(("already linked\n")); + NEXT_INST_F(5, 1, 0); + } + if (TclIsVarInHash(linkPtr)) { + VarHashRefCount(linkPtr)--; + if (TclIsVarUndefined(linkPtr)) { + TclCleanupVar(linkPtr, NULL); + } + } + } + TclSetVarLink(varPtr); + varPtr->value.linkPtr = otherPtr; + if (TclIsVarInHash(otherPtr)) { + VarHashRefCount(otherPtr)++; + } + } else if (TclPtrObjMakeUpvar(interp, otherPtr, NULL, 0, + opnd) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Do not pop the namespace or frame index, it may be needed for other + * variables - and [variable] did not push it at all. + */ + + TRACE_APPEND(("link made\n")); + NEXT_INST_F(5, 1, 0); + } + + /* + * End of variable linking instructions. + * ----------------------------------------------------------------- + */ + + case INST_JUMP1: + opnd = TclGetInt1AtPtr(pc+1); + TRACE(("%d => new pc %u\n", opnd, + (unsigned)(pc + opnd - codePtr->codeStart))); + NEXT_INST_F(opnd, 0, 0); + + case INST_JUMP4: + opnd = TclGetInt4AtPtr(pc+1); + TRACE(("%d => new pc %u\n", opnd, + (unsigned)(pc + opnd - codePtr->codeStart))); + NEXT_INST_F(opnd, 0, 0); + + { + int jmpOffset[2], b; + + /* TODO: consider rewrite so we don't compute the offset we're not + * going to take. */ + case INST_JUMP_FALSE4: + jmpOffset[0] = TclGetInt4AtPtr(pc+1); /* FALSE offset */ + jmpOffset[1] = 5; /* TRUE offset */ + goto doCondJump; + + case INST_JUMP_TRUE4: + jmpOffset[0] = 5; + jmpOffset[1] = TclGetInt4AtPtr(pc+1); + goto doCondJump; + + case INST_JUMP_FALSE1: + jmpOffset[0] = TclGetInt1AtPtr(pc+1); + jmpOffset[1] = 2; + goto doCondJump; + + case INST_JUMP_TRUE1: + jmpOffset[0] = 2; + jmpOffset[1] = TclGetInt1AtPtr(pc+1); + + doCondJump: + valuePtr = OBJ_AT_TOS; + TRACE(("%d => ", jmpOffset[ + (*pc==INST_JUMP_FALSE1 || *pc==INST_JUMP_FALSE4) ? 0 : 1])); + + /* TODO - check claim that taking address of b harms performance */ + /* TODO - consider optimization search for constants */ + if (TclGetBooleanFromObj(interp, valuePtr, &b) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + +#ifdef TCL_COMPILE_DEBUG + if (b) { + if ((*pc == INST_JUMP_TRUE1) || (*pc == INST_JUMP_TRUE4)) { + TRACE_APPEND(("%.20s true, new pc %u\n", O2S(valuePtr), + (unsigned)(pc + jmpOffset[1] - codePtr->codeStart))); + } else { + TRACE_APPEND(("%.20s true\n", O2S(valuePtr))); + } + } else { + if ((*pc == INST_JUMP_TRUE1) || (*pc == INST_JUMP_TRUE4)) { + TRACE_APPEND(("%.20s false\n", O2S(valuePtr))); + } else { + TRACE_APPEND(("%.20s false, new pc %u\n", O2S(valuePtr), + (unsigned)(pc + jmpOffset[0] - codePtr->codeStart))); + } + } +#endif + NEXT_INST_F(jmpOffset[b], 1, 0); + } + + case INST_JUMP_TABLE: { + Tcl_HashEntry *hPtr; + JumptableInfo *jtPtr; + + /* + * Jump to location looked up in a hashtable; fall through to next + * instr if lookup fails. + */ + + opnd = TclGetInt4AtPtr(pc+1); + jtPtr = (JumptableInfo *) codePtr->auxDataArrayPtr[opnd].clientData; + TRACE(("%d \"%.20s\" => ", opnd, O2S(OBJ_AT_TOS))); + hPtr = Tcl_FindHashEntry(&jtPtr->hashTable, TclGetString(OBJ_AT_TOS)); + if (hPtr != NULL) { + int jumpOffset = PTR2INT(Tcl_GetHashValue(hPtr)); + + TRACE_APPEND(("found in table, new pc %u\n", + (unsigned)(pc - codePtr->codeStart + jumpOffset))); + NEXT_INST_F(jumpOffset, 1, 0); + } else { + TRACE_APPEND(("not found in table\n")); + NEXT_INST_F(5, 1, 0); + } + } + + /* + * These two instructions are now redundant: the complete logic of the LOR + * and LAND is now handled by the expression compiler. + */ + + case INST_LOR: + case INST_LAND: { + /* + * Operands must be boolean or numeric. No int->double conversions are + * performed. + */ + + int i1, i2, iResult; + + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + if (TclGetBooleanFromObj(NULL, valuePtr, &i1) != TCL_OK) { + TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto gotError; + } + + if (TclGetBooleanFromObj(NULL, value2Ptr, &i2) != TCL_OK) { + TRACE(("\"%.20s\" => ILLEGAL TYPE %s \n", O2S(value2Ptr), + (value2Ptr->typePtr? value2Ptr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, value2Ptr); + CACHE_STACK_INFO(); + goto gotError; + } + + if (*pc == INST_LOR) { + iResult = (i1 || i2); + } else { + iResult = (i1 && i2); + } + objResultPtr = TCONST(iResult); + TRACE(("%.20s %.20s => %d\n", O2S(valuePtr),O2S(value2Ptr),iResult)); + NEXT_INST_F(1, 2, 1); + } + + /* + * ----------------------------------------------------------------- + * Start of general introspector instructions. + */ + + case INST_NS_CURRENT: { + Namespace *currNsPtr = (Namespace *) TclGetCurrentNamespace(interp); + + if (currNsPtr == (Namespace *) TclGetGlobalNamespace(interp)) { + TclNewLiteralStringObj(objResultPtr, "::"); + } else { + TclNewStringObj(objResultPtr, currNsPtr->fullName, + strlen(currNsPtr->fullName)); + } + TRACE_WITH_OBJ(("=> "), objResultPtr); + NEXT_INST_F(1, 0, 1); + } + case INST_COROUTINE_NAME: { + CoroutineData *corPtr = iPtr->execEnvPtr->corPtr; + + TclNewObj(objResultPtr); + if (corPtr && !(corPtr->cmdPtr->flags & CMD_IS_DELETED)) { + Tcl_GetCommandFullName(interp, (Tcl_Command) corPtr->cmdPtr, + objResultPtr); + } + TRACE_WITH_OBJ(("=> "), objResultPtr); + NEXT_INST_F(1, 0, 1); + } + case INST_INFO_LEVEL_NUM: + TclNewIntObj(objResultPtr, iPtr->varFramePtr->level); + TRACE_WITH_OBJ(("=> "), objResultPtr); + NEXT_INST_F(1, 0, 1); + case INST_INFO_LEVEL_ARGS: { + int level; + register CallFrame *framePtr = iPtr->varFramePtr; + register CallFrame *rootFramePtr = iPtr->rootFramePtr; + + TRACE(("\"%.30s\" => ", O2S(OBJ_AT_TOS))); + if (TclGetIntFromObj(interp, OBJ_AT_TOS, &level) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + if (level <= 0) { + level += framePtr->level; + } + for (; (framePtr->level!=level) && (framePtr!=rootFramePtr) ; + framePtr = framePtr->callerVarPtr) { + /* Empty loop body */ + } + if (framePtr == rootFramePtr) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "bad level \"%s\"", TclGetString(OBJ_AT_TOS))); + TRACE_ERROR(interp); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "STACK_LEVEL", + TclGetString(OBJ_AT_TOS), NULL); + CACHE_STACK_INFO(); + goto gotError; + } + objResultPtr = Tcl_NewListObj(framePtr->objc, framePtr->objv); + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + } + { + Tcl_Command cmd, origCmd; + + case INST_RESOLVE_COMMAND: + cmd = Tcl_GetCommandFromObj(interp, OBJ_AT_TOS); + TclNewObj(objResultPtr); + if (cmd != NULL) { + Tcl_GetCommandFullName(interp, cmd, objResultPtr); + } + TRACE_WITH_OBJ(("\"%.20s\" => ", O2S(OBJ_AT_TOS)), objResultPtr); + NEXT_INST_F(1, 1, 1); + + case INST_ORIGIN_COMMAND: + TRACE(("\"%.30s\" => ", O2S(OBJ_AT_TOS))); + cmd = Tcl_GetCommandFromObj(interp, OBJ_AT_TOS); + if (cmd == NULL) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "invalid command name \"%s\"", TclGetString(OBJ_AT_TOS))); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "COMMAND", + TclGetString(OBJ_AT_TOS), NULL); + CACHE_STACK_INFO(); + TRACE_APPEND(("ERROR: not command\n")); + goto gotError; + } + origCmd = TclGetOriginalCommand(cmd); + if (origCmd == NULL) { + origCmd = cmd; + } + TclNewObj(objResultPtr); + Tcl_GetCommandFullName(interp, origCmd, objResultPtr); + TRACE_APPEND(("\"%.30s\"", O2S(OBJ_AT_TOS))); + NEXT_INST_F(1, 1, 1); + } + + /* + * ----------------------------------------------------------------- + * Start of TclOO support instructions. + */ + + { + Object *oPtr; + CallFrame *framePtr; + CallContext *contextPtr; + int skip, newDepth; + + case INST_TCLOO_SELF: + framePtr = iPtr->varFramePtr; + if (framePtr == NULL || + !(framePtr->isProcCallFrame & FRAME_IS_METHOD)) { + TRACE(("=> ERROR: no TclOO call context\n")); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "self may only be called from inside a method", + -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "OO", "CONTEXT_REQUIRED", NULL); + CACHE_STACK_INFO(); + goto gotError; + } + contextPtr = framePtr->clientData; + + /* + * Call out to get the name; it's expensive to compute but cached. + */ + + objResultPtr = TclOOObjectName(interp, contextPtr->oPtr); + TRACE_WITH_OBJ(("=> "), objResultPtr); + NEXT_INST_F(1, 0, 1); + + case INST_TCLOO_NEXT_CLASS: + opnd = TclGetUInt1AtPtr(pc+1); + framePtr = iPtr->varFramePtr; + valuePtr = OBJ_AT_DEPTH(opnd - 2); + objv = &OBJ_AT_DEPTH(opnd - 1); + skip = 2; + TRACE(("%d => ", opnd)); + if (framePtr == NULL || + !(framePtr->isProcCallFrame & FRAME_IS_METHOD)) { + TRACE_APPEND(("ERROR: no TclOO call context\n")); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "nextto may only be called from inside a method", + -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "OO", "CONTEXT_REQUIRED", NULL); + CACHE_STACK_INFO(); + goto gotError; + } + contextPtr = framePtr->clientData; + + oPtr = (Object *) Tcl_GetObjectFromObj(interp, valuePtr); + if (oPtr == NULL) { + TRACE_APPEND(("ERROR: \"%.30s\" not object\n", O2S(valuePtr))); + goto gotError; + } else { + Class *classPtr = oPtr->classPtr; + struct MInvoke *miPtr; + int i; + const char *methodType; + + if (classPtr == NULL) { + TRACE_APPEND(("ERROR: \"%.30s\" not class\n", O2S(valuePtr))); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "\"%s\" is not a class", TclGetString(valuePtr))); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "OO", "CLASS_REQUIRED", NULL); + CACHE_STACK_INFO(); + goto gotError; + } + + for (i=contextPtr->index+1 ; i<contextPtr->callPtr->numChain ; i++) { + miPtr = contextPtr->callPtr->chain + i; + if (!miPtr->isFilter && + miPtr->mPtr->declaringClassPtr == classPtr) { + newDepth = i; +#ifdef TCL_COMPILE_DEBUG + if (tclTraceExec >= 2) { + if (traceInstructions) { + strncpy(cmdNameBuf, TclGetString(objv[0]), 20); + } else { + fprintf(stdout, "%d: (%u) invoking ", + iPtr->numLevels, + (unsigned)(pc - codePtr->codeStart)); + } + for (i = 0; i < opnd; i++) { + TclPrintObject(stdout, objv[i], 15); + fprintf(stdout, " "); + } + fprintf(stdout, "\n"); + fflush(stdout); + } +#endif /*TCL_COMPILE_DEBUG*/ + goto doInvokeNext; + } + } + + if (contextPtr->callPtr->flags & CONSTRUCTOR) { + methodType = "constructor"; + } else if (contextPtr->callPtr->flags & DESTRUCTOR) { + methodType = "destructor"; + } else { + methodType = "method"; + } + + TRACE_APPEND(("ERROR: \"%.30s\" not on reachable chain\n", + O2S(valuePtr))); + for (i=contextPtr->index ; i>=0 ; i--) { + miPtr = contextPtr->callPtr->chain + i; + if (miPtr->isFilter + || miPtr->mPtr->declaringClassPtr != classPtr) { + continue; + } + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "%s implementation by \"%s\" not reachable from here", + methodType, TclGetString(valuePtr))); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "OO", "CLASS_NOT_REACHABLE", + NULL); + CACHE_STACK_INFO(); + goto gotError; + } + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "%s has no non-filter implementation by \"%s\"", + methodType, TclGetString(valuePtr))); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "OO", "CLASS_NOT_THERE", NULL); + CACHE_STACK_INFO(); + goto gotError; + } + + case INST_TCLOO_NEXT: + opnd = TclGetUInt1AtPtr(pc+1); + objv = &OBJ_AT_DEPTH(opnd - 1); + framePtr = iPtr->varFramePtr; + skip = 1; + TRACE(("%d => ", opnd)); + if (framePtr == NULL || + !(framePtr->isProcCallFrame & FRAME_IS_METHOD)) { + TRACE_APPEND(("ERROR: no TclOO call context\n")); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "next may only be called from inside a method", + -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "OO", "CONTEXT_REQUIRED", NULL); + CACHE_STACK_INFO(); + goto gotError; + } + contextPtr = framePtr->clientData; + + newDepth = contextPtr->index + 1; + if (newDepth >= contextPtr->callPtr->numChain) { + /* + * We're at the end of the chain; generate an error message unless + * the interpreter is being torn down, in which case we might be + * getting here because of methods/destructors doing a [next] (or + * equivalent) unexpectedly. + */ + + const char *methodType; + + if (contextPtr->callPtr->flags & CONSTRUCTOR) { + methodType = "constructor"; + } else if (contextPtr->callPtr->flags & DESTRUCTOR) { + methodType = "destructor"; + } else { + methodType = "method"; + } + + TRACE_APPEND(("ERROR: no TclOO next impl\n")); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "no next %s implementation", methodType)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "OO", "NOTHING_NEXT", NULL); + CACHE_STACK_INFO(); + goto gotError; +#ifdef TCL_COMPILE_DEBUG + } else if (tclTraceExec >= 2) { + int i; + + if (traceInstructions) { + strncpy(cmdNameBuf, TclGetString(objv[0]), 20); + } else { + fprintf(stdout, "%d: (%u) invoking ", + iPtr->numLevels, (unsigned)(pc - codePtr->codeStart)); + } + for (i = 0; i < opnd; i++) { + TclPrintObject(stdout, objv[i], 15); + fprintf(stdout, " "); + } + fprintf(stdout, "\n"); + fflush(stdout); +#endif /*TCL_COMPILE_DEBUG*/ + } + + doInvokeNext: + bcFramePtr->data.tebc.pc = (char *) pc; + iPtr->cmdFramePtr = bcFramePtr; + + if (iPtr->flags & INTERP_DEBUG_FRAME) { + ArgumentBCEnter(interp, codePtr, TD, pc, opnd, objv); + } + + pcAdjustment = 2; + cleanup = opnd; + DECACHE_STACK_INFO(); + iPtr->varFramePtr = framePtr->callerVarPtr; + pc += pcAdjustment; + TEBC_YIELD(); + + TclPushTailcallPoint(interp); + oPtr = contextPtr->oPtr; + if (oPtr->flags & FILTER_HANDLING) { + TclNRAddCallback(interp, FinalizeOONextFilter, + framePtr, contextPtr, INT2PTR(contextPtr->index), + INT2PTR(contextPtr->skip)); + } else { + TclNRAddCallback(interp, FinalizeOONext, + framePtr, contextPtr, INT2PTR(contextPtr->index), + INT2PTR(contextPtr->skip)); + } + contextPtr->skip = skip; + contextPtr->index = newDepth; + if (contextPtr->callPtr->chain[newDepth].isFilter + || contextPtr->callPtr->flags & FILTER_HANDLING) { + oPtr->flags |= FILTER_HANDLING; + } else { + oPtr->flags &= ~FILTER_HANDLING; + } + + { + register Method *const mPtr = + contextPtr->callPtr->chain[newDepth].mPtr; + + return mPtr->typePtr->callProc(mPtr->clientData, interp, + (Tcl_ObjectContext) contextPtr, opnd, objv); + } + + case INST_TCLOO_IS_OBJECT: + oPtr = (Object *) Tcl_GetObjectFromObj(interp, OBJ_AT_TOS); + objResultPtr = TCONST(oPtr != NULL ? 1 : 0); + TRACE_WITH_OBJ(("%.30s => ", O2S(OBJ_AT_TOS)), objResultPtr); + NEXT_INST_F(1, 1, 1); + case INST_TCLOO_CLASS: + oPtr = (Object *) Tcl_GetObjectFromObj(interp, OBJ_AT_TOS); + if (oPtr == NULL) { + TRACE(("%.30s => ERROR: not object\n", O2S(OBJ_AT_TOS))); + goto gotError; + } + objResultPtr = TclOOObjectName(interp, oPtr->selfCls->thisPtr); + TRACE_WITH_OBJ(("%.30s => ", O2S(OBJ_AT_TOS)), objResultPtr); + NEXT_INST_F(1, 1, 1); + case INST_TCLOO_NS: + oPtr = (Object *) Tcl_GetObjectFromObj(interp, OBJ_AT_TOS); + if (oPtr == NULL) { + TRACE(("%.30s => ERROR: not object\n", O2S(OBJ_AT_TOS))); + goto gotError; + } + + /* + * TclOO objects *never* have the global namespace as their NS. + */ + + TclNewStringObj(objResultPtr, oPtr->namespacePtr->fullName, + strlen(oPtr->namespacePtr->fullName)); + TRACE_WITH_OBJ(("%.30s => ", O2S(OBJ_AT_TOS)), objResultPtr); + NEXT_INST_F(1, 1, 1); + } + + /* + * End of TclOO support instructions. + * ----------------------------------------------------------------- + * Start of INST_LIST and related instructions. + */ + + { + int index, numIndices, fromIdx, toIdx; + int nocase, match, length2, cflags, s1len, s2len; + const char *s1, *s2; + + case INST_LIST: + /* + * Pop the opnd (objc) top stack elements into a new list obj and then + * decrement their ref counts. + */ + + opnd = TclGetUInt4AtPtr(pc+1); + objResultPtr = Tcl_NewListObj(opnd, &OBJ_AT_DEPTH(opnd-1)); + TRACE_WITH_OBJ(("%u => ", opnd), objResultPtr); + NEXT_INST_V(5, opnd, 1); + + case INST_LIST_LENGTH: + TRACE(("\"%.30s\" => ", O2S(OBJ_AT_TOS))); + if (TclListObjLength(interp, OBJ_AT_TOS, &length) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + TclNewIntObj(objResultPtr, length); + TRACE_APPEND(("%d\n", length)); + NEXT_INST_F(1, 1, 1); + + case INST_LIST_INDEX: /* lindex with objc == 3 */ + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + TRACE(("\"%.30s\" \"%.30s\" => ", O2S(valuePtr), O2S(value2Ptr))); + + /* + * Extract the desired list element. + */ + + if ((TclListObjGetElements(interp, valuePtr, &objc, &objv) == TCL_OK) + && (value2Ptr->typePtr != &tclListType) + && (TclGetIntForIndexM(NULL , value2Ptr, objc-1, + &index) == TCL_OK)) { + TclDecrRefCount(value2Ptr); + tosPtr--; + pcAdjustment = 1; + goto lindexFastPath; + } + + objResultPtr = TclLindexList(interp, valuePtr, value2Ptr); + if (!objResultPtr) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Stash the list element on the stack. + */ + + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, -1); /* Already has the correct refCount */ + + case INST_LIST_INDEX_IMM: /* lindex with objc==3 and index in bytecode + * stream */ + + /* + * Pop the list and get the index. + */ + + valuePtr = OBJ_AT_TOS; + opnd = TclGetInt4AtPtr(pc+1); + TRACE(("\"%.30s\" %d => ", O2S(valuePtr), opnd)); + + /* + * Get the contents of the list, making sure that it really is a list + * in the process. + */ + + if (TclListObjGetElements(interp, valuePtr, &objc, &objv) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Select the list item based on the index. Negative operand means + * end-based indexing. + */ + + if (opnd < -1) { + index = opnd+1 + objc; + } else { + index = opnd; + } + pcAdjustment = 5; + + lindexFastPath: + if (index >= 0 && index < objc) { + objResultPtr = objv[index]; + } else { + TclNewObj(objResultPtr); + } + + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_F(pcAdjustment, 1, 1); + + case INST_LIST_INDEX_MULTI: /* 'lindex' with multiple index args */ + /* + * Determine the count of index args. + */ + + opnd = TclGetUInt4AtPtr(pc+1); + numIndices = opnd-1; + + /* + * Do the 'lindex' operation. + */ + + TRACE(("%d => ", opnd)); + objResultPtr = TclLindexFlat(interp, OBJ_AT_DEPTH(numIndices), + numIndices, &OBJ_AT_DEPTH(numIndices - 1)); + if (!objResultPtr) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Set result. + */ + + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_V(5, opnd, -1); + + case INST_LSET_FLAT: + /* + * Lset with 3, 5, or more args. Get the number of index args. + */ + + opnd = TclGetUInt4AtPtr(pc + 1); + numIndices = opnd - 2; + TRACE(("%d => ", opnd)); + + /* + * Get the old value of variable, and remove the stack ref. This is + * safe because the variable still references the object; the ref + * count will never go zero here - we can use the smaller macro + * Tcl_DecrRefCount. + */ + + valuePtr = POP_OBJECT(); + Tcl_DecrRefCount(valuePtr); /* This one should be done here */ + + /* + * Compute the new variable value. + */ + + objResultPtr = TclLsetFlat(interp, valuePtr, numIndices, + &OBJ_AT_DEPTH(numIndices), OBJ_AT_TOS); + if (!objResultPtr) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Set result. + */ + + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_V(5, numIndices+1, -1); + + case INST_LSET_LIST: /* 'lset' with 4 args */ + /* + * Get the old value of variable, and remove the stack ref. This is + * safe because the variable still references the object; the ref + * count will never go zero here - we can use the smaller macro + * Tcl_DecrRefCount. + */ + + objPtr = POP_OBJECT(); + Tcl_DecrRefCount(objPtr); /* This one should be done here. */ + + /* + * Get the new element value, and the index list. + */ + + valuePtr = OBJ_AT_TOS; + value2Ptr = OBJ_UNDER_TOS; + TRACE(("\"%.30s\" \"%.30s\" \"%.30s\" => ", + O2S(value2Ptr), O2S(valuePtr), O2S(objPtr))); + + /* + * Compute the new variable value. + */ + + objResultPtr = TclLsetList(interp, objPtr, value2Ptr, valuePtr); + if (!objResultPtr) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Set result. + */ + + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, -1); + + case INST_LIST_RANGE_IMM: /* lrange with objc==4 and both indices in + * bytecode stream */ + + /* + * Pop the list and get the indices. + */ + + valuePtr = OBJ_AT_TOS; + fromIdx = TclGetInt4AtPtr(pc+1); + toIdx = TclGetInt4AtPtr(pc+5); + TRACE(("\"%.30s\" %d %d => ", O2S(valuePtr), TclGetInt4AtPtr(pc+1), + TclGetInt4AtPtr(pc+5))); + + /* + * Get the contents of the list, making sure that it really is a list + * in the process. + */ + + if (TclListObjGetElements(interp, valuePtr, &objc, &objv) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Skip a lot of work if we're about to throw the result away (common + * with uses of [lassign]). + */ + +#ifndef TCL_COMPILE_DEBUG + if (*(pc+9) == INST_POP) { + NEXT_INST_F(10, 1, 0); + } +#endif + + /* + * Adjust the indices for end-based handling. + */ + + if (fromIdx < -1) { + fromIdx += 1+objc; + if (fromIdx < -1) { + fromIdx = -1; + } + } else if (fromIdx > objc) { + fromIdx = objc; + } + if (toIdx < -1) { + toIdx += 1 + objc; + if (toIdx < -1) { + toIdx = -1; + } + } else if (toIdx > objc) { + toIdx = objc; + } + + /* + * Check if we are referring to a valid, non-empty list range, and if + * so, build the list of elements in that range. + */ + + if (fromIdx<=toIdx && fromIdx<objc && toIdx>=0) { + if (fromIdx < 0) { + fromIdx = 0; + } + if (toIdx >= objc) { + toIdx = objc-1; + } + if (fromIdx == 0 && toIdx != objc-1 && !Tcl_IsShared(valuePtr)) { + Tcl_ListObjReplace(interp, valuePtr, + toIdx + 1, LIST_MAX, 0, NULL); + TRACE_APPEND(("%.30s\n", O2S(valuePtr))); + NEXT_INST_F(9, 0, 0); + } + objResultPtr = Tcl_NewListObj(toIdx-fromIdx+1, objv+fromIdx); + } else { + TclNewObj(objResultPtr); + } + + TRACE_APPEND(("\"%.30s\"", O2S(objResultPtr))); + NEXT_INST_F(9, 1, 1); + + case INST_LIST_IN: + case INST_LIST_NOT_IN: /* Basic list containment operators. */ + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + + s1 = TclGetStringFromObj(valuePtr, &s1len); + TRACE(("\"%.30s\" \"%.30s\" => ", O2S(valuePtr), O2S(value2Ptr))); + if (TclListObjLength(interp, value2Ptr, &length) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + match = 0; + if (length > 0) { + int i = 0; + Tcl_Obj *o; + + /* + * An empty list doesn't match anything. + */ + + do { + Tcl_ListObjIndex(NULL, value2Ptr, i, &o); + if (o != NULL) { + s2 = TclGetStringFromObj(o, &s2len); + } else { + s2 = ""; + s2len = 0; + } + if (s1len == s2len) { + match = (memcmp(s1, s2, s1len) == 0); + } + i++; + } while (i < length && match == 0); + } + + if (*pc == INST_LIST_NOT_IN) { + match = !match; + } + + TRACE_APPEND(("%d\n", match)); + + /* + * Peep-hole optimisation: if you're about to jump, do jump from here. + * We're saving the effort of pushing a boolean value only to pop it + * for branching. + */ + + JUMP_PEEPHOLE_F(match, 1, 2); + + case INST_LIST_CONCAT: + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + TRACE(("\"%.30s\" \"%.30s\" => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_DuplicateObj(valuePtr); + if (Tcl_ListObjAppendList(interp, objResultPtr, + value2Ptr) != TCL_OK) { + TRACE_ERROR(interp); + TclDecrRefCount(objResultPtr); + goto gotError; + } + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } else { + if (Tcl_ListObjAppendList(interp, valuePtr, value2Ptr) != TCL_OK){ + TRACE_ERROR(interp); + goto gotError; + } + TRACE_APPEND(("\"%.30s\"\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + + /* + * End of INST_LIST and related instructions. + * ----------------------------------------------------------------- + * Start of string-related instructions. + */ + + case INST_STR_EQ: + case INST_STR_NEQ: /* String (in)equality check */ + case INST_STR_CMP: /* String compare. */ + stringCompare: + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + + if (valuePtr == value2Ptr) { + match = 0; + } else { + /* + * We only need to check (in)equality when we have equal length + * strings. We can use memcmp in all (n)eq cases because we + * don't need to worry about lexical LE/BE variance. + */ + + typedef int (*memCmpFn_t)(const void*, const void*, size_t); + memCmpFn_t memCmpFn; + int checkEq = ((*pc == INST_EQ) || (*pc == INST_NEQ) + || (*pc == INST_STR_EQ) || (*pc == INST_STR_NEQ)); + + if (TclIsPureByteArray(valuePtr) + && TclIsPureByteArray(value2Ptr)) { + s1 = (char *) Tcl_GetByteArrayFromObj(valuePtr, &s1len); + s2 = (char *) Tcl_GetByteArrayFromObj(value2Ptr, &s2len); + memCmpFn = memcmp; + } else if ((valuePtr->typePtr == &tclStringType) + && (value2Ptr->typePtr == &tclStringType)) { + /* + * Do a unicode-specific comparison if both of the args are of + * String type. If the char length == byte length, we can do a + * memcmp. In benchmark testing this proved the most efficient + * check between the unicode and string comparison operations. + */ + + s1len = Tcl_GetCharLength(valuePtr); + s2len = Tcl_GetCharLength(value2Ptr); + if ((s1len == valuePtr->length) + && (valuePtr->bytes != NULL) + && (s2len == value2Ptr->length) + && (value2Ptr->bytes != NULL)) { + s1 = valuePtr->bytes; + s2 = value2Ptr->bytes; + memCmpFn = memcmp; + } else { + s1 = (char *) Tcl_GetUnicode(valuePtr); + s2 = (char *) Tcl_GetUnicode(value2Ptr); + if ( +#ifdef WORDS_BIGENDIAN + 1 +#else + checkEq +#endif + ) { + memCmpFn = memcmp; + s1len *= sizeof(Tcl_UniChar); + s2len *= sizeof(Tcl_UniChar); + } else { + memCmpFn = (memCmpFn_t) Tcl_UniCharNcmp; + } + } + } else { + /* + * strcmp can't do a simple memcmp in order to handle the + * special Tcl \xC0\x80 null encoding for utf-8. + */ + + s1 = TclGetStringFromObj(valuePtr, &s1len); + s2 = TclGetStringFromObj(value2Ptr, &s2len); + if (checkEq) { + memCmpFn = memcmp; + } else { + memCmpFn = (memCmpFn_t) TclpUtfNcmp2; + } + } + + if (checkEq && (s1len != s2len)) { + match = 1; + } else { + /* + * The comparison function should compare up to the minimum + * byte length only. + */ + match = memCmpFn(s1, s2, + (size_t) ((s1len < s2len) ? s1len : s2len)); + if (match == 0) { + match = s1len - s2len; + } + } + } + + /* + * Make sure only -1,0,1 is returned + * TODO: consider peephole opt. + */ + + if (*pc != INST_STR_CMP) { + /* + * Take care of the opcodes that goto'ed into here. + */ + + switch (*pc) { + case INST_STR_EQ: + case INST_EQ: + match = (match == 0); + break; + case INST_STR_NEQ: + case INST_NEQ: + match = (match != 0); + break; + case INST_LT: + match = (match < 0); + break; + case INST_GT: + match = (match > 0); + break; + case INST_LE: + match = (match <= 0); + break; + case INST_GE: + match = (match >= 0); + break; + } + } + + TRACE(("\"%.20s\" \"%.20s\" => %d\n", O2S(valuePtr), O2S(value2Ptr), + (match < 0 ? -1 : match > 0 ? 1 : 0))); + JUMP_PEEPHOLE_F(match, 1, 2); + + case INST_STR_LEN: + valuePtr = OBJ_AT_TOS; + length = Tcl_GetCharLength(valuePtr); + TclNewIntObj(objResultPtr, length); + TRACE(("\"%.20s\" => %d\n", O2S(valuePtr), length)); + NEXT_INST_F(1, 1, 1); + + case INST_STR_UPPER: + valuePtr = OBJ_AT_TOS; + TRACE(("\"%.20s\" => ", O2S(valuePtr))); + if (Tcl_IsShared(valuePtr)) { + s1 = TclGetStringFromObj(valuePtr, &length); + TclNewStringObj(objResultPtr, s1, length); + length = Tcl_UtfToUpper(TclGetString(objResultPtr)); + Tcl_SetObjLength(objResultPtr, length); + TRACE_APPEND(("\"%.20s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + } else { + length = Tcl_UtfToUpper(TclGetString(valuePtr)); + Tcl_SetObjLength(valuePtr, length); + TclFreeIntRep(valuePtr); + TRACE_APPEND(("\"%.20s\"\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); + } + case INST_STR_LOWER: + valuePtr = OBJ_AT_TOS; + TRACE(("\"%.20s\" => ", O2S(valuePtr))); + if (Tcl_IsShared(valuePtr)) { + s1 = TclGetStringFromObj(valuePtr, &length); + TclNewStringObj(objResultPtr, s1, length); + length = Tcl_UtfToLower(TclGetString(objResultPtr)); + Tcl_SetObjLength(objResultPtr, length); + TRACE_APPEND(("\"%.20s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + } else { + length = Tcl_UtfToLower(TclGetString(valuePtr)); + Tcl_SetObjLength(valuePtr, length); + TclFreeIntRep(valuePtr); + TRACE_APPEND(("\"%.20s\"\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); + } + case INST_STR_TITLE: + valuePtr = OBJ_AT_TOS; + TRACE(("\"%.20s\" => ", O2S(valuePtr))); + if (Tcl_IsShared(valuePtr)) { + s1 = TclGetStringFromObj(valuePtr, &length); + TclNewStringObj(objResultPtr, s1, length); + length = Tcl_UtfToTitle(TclGetString(objResultPtr)); + Tcl_SetObjLength(objResultPtr, length); + TRACE_APPEND(("\"%.20s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + } else { + length = Tcl_UtfToTitle(TclGetString(valuePtr)); + Tcl_SetObjLength(valuePtr, length); + TclFreeIntRep(valuePtr); + TRACE_APPEND(("\"%.20s\"\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); + } + + case INST_STR_INDEX: + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + TRACE(("\"%.20s\" %.20s => ", O2S(valuePtr), O2S(value2Ptr))); + + /* + * Get char length to calulate what 'end' means. + */ + + length = Tcl_GetCharLength(valuePtr); + if (TclGetIntForIndexM(interp, value2Ptr, length-1, &index)!=TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + + if ((index < 0) || (index >= length)) { + TclNewObj(objResultPtr); + } else if (TclIsPureByteArray(valuePtr)) { + objResultPtr = Tcl_NewByteArrayObj( + Tcl_GetByteArrayFromObj(valuePtr, NULL)+index, 1); + } else if (valuePtr->bytes && length == valuePtr->length) { + objResultPtr = Tcl_NewStringObj((const char *) + valuePtr->bytes+index, 1); + } else { + char buf[TCL_UTF_MAX]; + Tcl_UniChar ch = Tcl_GetUniChar(valuePtr, index); + + /* + * This could be: Tcl_NewUnicodeObj((const Tcl_UniChar *)&ch, 1) + * but creating the object as a string seems to be faster in + * practical use. + */ + + length = Tcl_UniCharToUtf(ch, buf); + objResultPtr = Tcl_NewStringObj(buf, length); + } + + TRACE_APPEND(("\"%s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + + case INST_STR_RANGE: + TRACE(("\"%.20s\" %.20s %.20s =>", + O2S(OBJ_AT_DEPTH(2)), O2S(OBJ_UNDER_TOS), O2S(OBJ_AT_TOS))); + length = Tcl_GetCharLength(OBJ_AT_DEPTH(2)) - 1; + if (TclGetIntForIndexM(interp, OBJ_UNDER_TOS, length, + &fromIdx) != TCL_OK + || TclGetIntForIndexM(interp, OBJ_AT_TOS, length, + &toIdx) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + + if (fromIdx < 0) { + fromIdx = 0; + } + if (toIdx >= length) { + toIdx = length; + } + if (toIdx >= fromIdx) { + objResultPtr = Tcl_GetRange(OBJ_AT_DEPTH(2), fromIdx, toIdx); + } else { + TclNewObj(objResultPtr); + } + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_V(1, 3, 1); + + case INST_STR_RANGE_IMM: + valuePtr = OBJ_AT_TOS; + fromIdx = TclGetInt4AtPtr(pc+1); + toIdx = TclGetInt4AtPtr(pc+5); + length = Tcl_GetCharLength(valuePtr); + TRACE(("\"%.20s\" %d %d => ", O2S(valuePtr), fromIdx, toIdx)); + + /* + * Adjust indices for end-based indexing. + */ + + if (fromIdx < -1) { + fromIdx += 1 + length; + if (fromIdx < 0) { + fromIdx = 0; + } + } else if (fromIdx >= length) { + fromIdx = length; + } + if (toIdx < -1) { + toIdx += 1 + length; + } else if (toIdx >= length) { + toIdx = length - 1; + } + + /* + * Check if we can do a sane substring. + */ + + if (fromIdx <= toIdx) { + objResultPtr = Tcl_GetRange(valuePtr, fromIdx, toIdx); + } else { + TclNewObj(objResultPtr); + } + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(9, 1, 1); + + { + Tcl_UniChar *ustring1, *ustring2, *ustring3, *end, *p; + int length3; + Tcl_Obj *value3Ptr; + + case INST_STR_REPLACE: + value3Ptr = POP_OBJECT(); + valuePtr = OBJ_AT_DEPTH(2); + length = Tcl_GetCharLength(valuePtr) - 1; + TRACE(("\"%.20s\" %s %s \"%.20s\" => ", O2S(valuePtr), + O2S(OBJ_UNDER_TOS), O2S(OBJ_AT_TOS), O2S(value3Ptr))); + if (TclGetIntForIndexM(interp, OBJ_UNDER_TOS, length, + &fromIdx) != TCL_OK + || TclGetIntForIndexM(interp, OBJ_AT_TOS, length, + &toIdx) != TCL_OK) { + TclDecrRefCount(value3Ptr); + TRACE_ERROR(interp); + goto gotError; + } + TclDecrRefCount(OBJ_AT_TOS); + (void) POP_OBJECT(); + TclDecrRefCount(OBJ_AT_TOS); + (void) POP_OBJECT(); + if (fromIdx < 0) { + fromIdx = 0; + } + + if (fromIdx > toIdx || fromIdx > length) { + TRACE_APPEND(("\"%.30s\"\n", O2S(valuePtr))); + TclDecrRefCount(value3Ptr); + NEXT_INST_F(1, 0, 0); + } + + if (toIdx > length) { + toIdx = length; + } + + if (fromIdx == 0 && toIdx == length) { + TclDecrRefCount(OBJ_AT_TOS); + OBJ_AT_TOS = value3Ptr; + TRACE_APPEND(("\"%.30s\"\n", O2S(value3Ptr))); + NEXT_INST_F(1, 0, 0); + } + + length3 = Tcl_GetCharLength(value3Ptr); + + /* + * See if we can splice in place. This happens when the number of + * characters being replaced is the same as the number of characters + * in the string to be inserted. + */ + + if (length3 - 1 == toIdx - fromIdx) { + unsigned char *bytes1, *bytes2; + + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_DuplicateObj(valuePtr); + } else { + objResultPtr = valuePtr; + } + if (TclIsPureByteArray(objResultPtr) + && TclIsPureByteArray(value3Ptr)) { + bytes1 = Tcl_GetByteArrayFromObj(objResultPtr, NULL); + bytes2 = Tcl_GetByteArrayFromObj(value3Ptr, NULL); + memcpy(bytes1 + fromIdx, bytes2, length3); + } else { + ustring1 = Tcl_GetUnicodeFromObj(objResultPtr, NULL); + ustring2 = Tcl_GetUnicodeFromObj(value3Ptr, NULL); + memcpy(ustring1 + fromIdx, ustring2, + length3 * sizeof(Tcl_UniChar)); + } + Tcl_InvalidateStringRep(objResultPtr); + TclDecrRefCount(value3Ptr); + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + if (objResultPtr == valuePtr) { + NEXT_INST_F(1, 0, 0); + } else { + NEXT_INST_F(1, 1, 1); + } + } + + /* + * Get the unicode representation; this is where we guarantee to lose + * bytearrays. + */ + + ustring1 = Tcl_GetUnicodeFromObj(valuePtr, &length); + length--; + + /* + * Remove substring using copying. + */ + + objResultPtr = NULL; + if (fromIdx > 0) { + objResultPtr = Tcl_NewUnicodeObj(ustring1, fromIdx); + } + if (length3 > 0) { + if (objResultPtr) { + Tcl_AppendObjToObj(objResultPtr, value3Ptr); + } else if (Tcl_IsShared(value3Ptr)) { + objResultPtr = Tcl_DuplicateObj(value3Ptr); + } else { + objResultPtr = value3Ptr; + } + } + if (toIdx < length) { + if (objResultPtr) { + Tcl_AppendUnicodeToObj(objResultPtr, ustring1 + toIdx + 1, + length - toIdx); + } else { + objResultPtr = Tcl_NewUnicodeObj(ustring1 + toIdx + 1, + length - toIdx); + } + } + if (objResultPtr == NULL) { + /* This has to be the case [string replace $s 0 end {}] */ + /* which has result {} which is same as value3Ptr. */ + objResultPtr = value3Ptr; + } + if (objResultPtr == value3Ptr) { + /* See [Bug 82e7f67325] */ + TclDecrRefCount(OBJ_AT_TOS); + OBJ_AT_TOS = value3Ptr; + TRACE_APPEND(("\"%.30s\"\n", O2S(value3Ptr))); + NEXT_INST_F(1, 0, 0); + } + TclDecrRefCount(value3Ptr); + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + + case INST_STR_MAP: + valuePtr = OBJ_AT_TOS; /* "Main" string. */ + value3Ptr = OBJ_UNDER_TOS; /* "Target" string. */ + value2Ptr = OBJ_AT_DEPTH(2); /* "Source" string. */ + if (value3Ptr == value2Ptr) { + objResultPtr = valuePtr; + goto doneStringMap; + } else if (valuePtr == value2Ptr) { + objResultPtr = value3Ptr; + goto doneStringMap; + } + ustring1 = Tcl_GetUnicodeFromObj(valuePtr, &length); + if (length == 0) { + objResultPtr = valuePtr; + goto doneStringMap; + } + ustring2 = Tcl_GetUnicodeFromObj(value2Ptr, &length2); + if (length2 > length || length2 == 0) { + objResultPtr = valuePtr; + goto doneStringMap; + } else if (length2 == length) { + if (memcmp(ustring1, ustring2, sizeof(Tcl_UniChar) * length)) { + objResultPtr = valuePtr; + } else { + objResultPtr = value3Ptr; + } + goto doneStringMap; + } + ustring3 = Tcl_GetUnicodeFromObj(value3Ptr, &length3); + + objResultPtr = Tcl_NewUnicodeObj(ustring1, 0); + p = ustring1; + end = ustring1 + length; + for (; ustring1 < end; ustring1++) { + if ((*ustring1 == *ustring2) && (length2==1 || + memcmp(ustring1, ustring2, sizeof(Tcl_UniChar) * length2) + == 0)) { + if (p != ustring1) { + Tcl_AppendUnicodeToObj(objResultPtr, p, ustring1-p); + p = ustring1 + length2; + } else { + p += length2; + } + ustring1 = p - 1; + + Tcl_AppendUnicodeToObj(objResultPtr, ustring3, length3); + } + } + if (p != ustring1) { + /* + * Put the rest of the unmapped chars onto result. + */ + + Tcl_AppendUnicodeToObj(objResultPtr, p, ustring1 - p); + } + doneStringMap: + TRACE_WITH_OBJ(("%.20s %.20s %.20s => ", + O2S(value2Ptr), O2S(value3Ptr), O2S(valuePtr)), objResultPtr); + NEXT_INST_V(1, 3, 1); + + case INST_STR_FIND: + match = TclStringFind(OBJ_UNDER_TOS, OBJ_AT_TOS, 0); + + TRACE(("%.20s %.20s => %d\n", + O2S(OBJ_UNDER_TOS), O2S(OBJ_AT_TOS), match)); + TclNewIntObj(objResultPtr, match); + NEXT_INST_F(1, 2, 1); + + case INST_STR_FIND_LAST: + match = TclStringLast(OBJ_UNDER_TOS, OBJ_AT_TOS, INT_MAX - 1); + + TRACE(("%.20s %.20s => %d\n", + O2S(OBJ_UNDER_TOS), O2S(OBJ_AT_TOS), match)); + TclNewIntObj(objResultPtr, match); + NEXT_INST_F(1, 2, 1); + + case INST_STR_CLASS: + opnd = TclGetInt1AtPtr(pc+1); + valuePtr = OBJ_AT_TOS; + TRACE(("%s \"%.30s\" => ", tclStringClassTable[opnd].name, + O2S(valuePtr))); + ustring1 = Tcl_GetUnicodeFromObj(valuePtr, &length); + match = 1; + if (length > 0) { + end = ustring1 + length; + for (p=ustring1 ; p<end ; p++) { + if (!tclStringClassTable[opnd].comparator(*p)) { + match = 0; + break; + } + } + } + TRACE_APPEND(("%d\n", match)); + JUMP_PEEPHOLE_F(match, 2, 1); + } + + case INST_STR_MATCH: + nocase = TclGetInt1AtPtr(pc+1); + valuePtr = OBJ_AT_TOS; /* String */ + value2Ptr = OBJ_UNDER_TOS; /* Pattern */ + + /* + * Check that at least one of the objects is Unicode before promoting + * both. + */ + + if ((valuePtr->typePtr == &tclStringType) + || (value2Ptr->typePtr == &tclStringType)) { + Tcl_UniChar *ustring1, *ustring2; + + ustring1 = Tcl_GetUnicodeFromObj(valuePtr, &length); + ustring2 = Tcl_GetUnicodeFromObj(value2Ptr, &length2); + match = TclUniCharMatch(ustring1, length, ustring2, length2, + nocase); + } else if (TclIsPureByteArray(valuePtr) && !nocase) { + unsigned char *bytes1, *bytes2; + + bytes1 = Tcl_GetByteArrayFromObj(valuePtr, &length); + bytes2 = Tcl_GetByteArrayFromObj(value2Ptr, &length2); + match = TclByteArrayMatch(bytes1, length, bytes2, length2, 0); + } else { + match = Tcl_StringCaseMatch(TclGetString(valuePtr), + TclGetString(value2Ptr), nocase); + } + + /* + * Reuse value2Ptr object already on stack if possible. Adjustment is + * 2 due to the nocase byte + */ + + TRACE(("%.20s %.20s => %d\n", O2S(valuePtr), O2S(value2Ptr), match)); + + /* + * Peep-hole optimisation: if you're about to jump, do jump from here. + */ + + JUMP_PEEPHOLE_F(match, 2, 2); + + { + const char *string1, *string2; + int trim1, trim2; + + case INST_STR_TRIM_LEFT: + valuePtr = OBJ_UNDER_TOS; /* String */ + value2Ptr = OBJ_AT_TOS; /* TrimSet */ + string2 = TclGetStringFromObj(value2Ptr, &length2); + string1 = TclGetStringFromObj(valuePtr, &length); + trim1 = TclTrimLeft(string1, length, string2, length2); + trim2 = 0; + goto createTrimmedString; + case INST_STR_TRIM_RIGHT: + valuePtr = OBJ_UNDER_TOS; /* String */ + value2Ptr = OBJ_AT_TOS; /* TrimSet */ + string2 = TclGetStringFromObj(value2Ptr, &length2); + string1 = TclGetStringFromObj(valuePtr, &length); + trim2 = TclTrimRight(string1, length, string2, length2); + trim1 = 0; + goto createTrimmedString; + case INST_STR_TRIM: + valuePtr = OBJ_UNDER_TOS; /* String */ + value2Ptr = OBJ_AT_TOS; /* TrimSet */ + string2 = TclGetStringFromObj(value2Ptr, &length2); + string1 = TclGetStringFromObj(valuePtr, &length); + trim1 = TclTrimLeft(string1, length, string2, length2); + if (trim1 < length) { + trim2 = TclTrimRight(string1, length, string2, length2); + } else { + trim2 = 0; + } + createTrimmedString: + /* + * Careful here; trim set often contains non-ASCII characters so we + * take care when printing. [Bug 971cb4f1db] + */ + +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + TRACE(("\"%.30s\" ", O2S(valuePtr))); + TclPrintObject(stdout, value2Ptr, 30); + printf(" => "); + } +#endif + if (trim1 == 0 && trim2 == 0) { +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + TclPrintObject(stdout, valuePtr, 30); + printf("\n"); + } +#endif + NEXT_INST_F(1, 1, 0); + } else { + objResultPtr = Tcl_NewStringObj(string1+trim1, length-trim1-trim2); +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + TclPrintObject(stdout, objResultPtr, 30); + printf("\n"); + } +#endif + NEXT_INST_F(1, 2, 1); + } + } + + case INST_REGEXP: + cflags = TclGetInt1AtPtr(pc+1); /* RE compile flages like NOCASE */ + valuePtr = OBJ_AT_TOS; /* String */ + value2Ptr = OBJ_UNDER_TOS; /* Pattern */ + TRACE(("\"%.30s\" \"%.30s\" => ", O2S(valuePtr), O2S(value2Ptr))); + + /* + * Compile and match the regular expression. + */ + + { + Tcl_RegExp regExpr = + Tcl_GetRegExpFromObj(interp, value2Ptr, cflags); + + if (regExpr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + match = Tcl_RegExpExecObj(interp, regExpr, valuePtr, 0, 0, 0); + if (match < 0) { + TRACE_ERROR(interp); + goto gotError; + } + } + + TRACE_APPEND(("%d\n", match)); + + /* + * Peep-hole optimisation: if you're about to jump, do jump from here. + * Adjustment is 2 due to the nocase byte. + */ + + JUMP_PEEPHOLE_F(match, 2, 2); + } + + /* + * End of string-related instructions. + * ----------------------------------------------------------------- + * Start of numeric operator instructions. + */ + + { + ClientData ptr1, ptr2; + int type1, type2; + long l1, l2, lResult; + + case INST_NUM_TYPE: + if (GetNumberFromObj(NULL, OBJ_AT_TOS, &ptr1, &type1) != TCL_OK) { + type1 = 0; + } else if (type1 == TCL_NUMBER_LONG) { + /* value is between LONG_MIN and LONG_MAX */ + /* [string is integer] is -UINT_MAX to UINT_MAX range */ + int i; + + if (Tcl_GetIntFromObj(NULL, OBJ_AT_TOS, &i) != TCL_OK) { + type1 = TCL_NUMBER_WIDE; + } +#ifndef TCL_WIDE_INT_IS_LONG + } else if (type1 == TCL_NUMBER_WIDE) { + /* value is between WIDE_MIN and WIDE_MAX */ + /* [string is wideinteger] is -UWIDE_MAX to UWIDE_MAX range */ + int i; + if (Tcl_GetIntFromObj(NULL, OBJ_AT_TOS, &i) == TCL_OK) { + type1 = TCL_NUMBER_LONG; + } +#endif + } else if (type1 == TCL_NUMBER_BIG) { + /* value is an integer outside the WIDE_MIN to WIDE_MAX range */ + /* [string is wideinteger] is -UWIDE_MAX to UWIDE_MAX range */ + Tcl_WideInt w; + + if (Tcl_GetWideIntFromObj(NULL, OBJ_AT_TOS, &w) == TCL_OK) { + type1 = TCL_NUMBER_WIDE; + } + } + TclNewIntObj(objResultPtr, type1); + TRACE(("\"%.20s\" => %d\n", O2S(OBJ_AT_TOS), type1)); + NEXT_INST_F(1, 1, 1); + + case INST_EQ: + case INST_NEQ: + case INST_LT: + case INST_GT: + case INST_LE: + case INST_GE: { + int iResult = 0, compare = 0; + + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + + if (GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) { + /* + * At least one non-numeric argument - compare as strings. + */ + + goto stringCompare; + } + if (type1 == TCL_NUMBER_NAN) { + /* + * NaN first arg: NaN != to everything, other compares are false. + */ + + iResult = (*pc == INST_NEQ); + goto foundResult; + } + if (valuePtr == value2Ptr) { + compare = MP_EQ; + goto convertComparison; + } + if (GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2) != TCL_OK) { + /* + * At least one non-numeric argument - compare as strings. + */ + + goto stringCompare; + } + if (type2 == TCL_NUMBER_NAN) { + /* + * NaN 2nd arg: NaN != to everything, other compares are false. + */ + + iResult = (*pc == INST_NEQ); + goto foundResult; + } + if ((type1 == TCL_NUMBER_LONG) && (type2 == TCL_NUMBER_LONG)) { + l1 = *((const long *)ptr1); + l2 = *((const long *)ptr2); + compare = (l1 < l2) ? MP_LT : ((l1 > l2) ? MP_GT : MP_EQ); + } else { + compare = TclCompareTwoNumbers(valuePtr, value2Ptr); + } + + /* + * Turn comparison outcome into appropriate result for opcode. + */ + + convertComparison: + switch (*pc) { + case INST_EQ: + iResult = (compare == MP_EQ); + break; + case INST_NEQ: + iResult = (compare != MP_EQ); + break; + case INST_LT: + iResult = (compare == MP_LT); + break; + case INST_GT: + iResult = (compare == MP_GT); + break; + case INST_LE: + iResult = (compare != MP_GT); + break; + case INST_GE: + iResult = (compare != MP_LT); + break; + } + + /* + * Peep-hole optimisation: if you're about to jump, do jump from here. + */ + + foundResult: + TRACE(("\"%.20s\" \"%.20s\" => %d\n", O2S(valuePtr), O2S(value2Ptr), + iResult)); + JUMP_PEEPHOLE_F(iResult, 1, 2); + } + + case INST_MOD: + case INST_LSHIFT: + case INST_RSHIFT: + case INST_BITOR: + case INST_BITXOR: + case INST_BITAND: + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + + if ((GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) + || (type1==TCL_NUMBER_DOUBLE) || (type1==TCL_NUMBER_NAN)) { + TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n", O2S(valuePtr), + O2S(value2Ptr), (valuePtr->typePtr? + valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto gotError; + } + + if ((GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2) != TCL_OK) + || (type2==TCL_NUMBER_DOUBLE) || (type2==TCL_NUMBER_NAN)) { + TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n", O2S(valuePtr), + O2S(value2Ptr), (value2Ptr->typePtr? + value2Ptr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, value2Ptr); + CACHE_STACK_INFO(); + goto gotError; + } + + /* + * Check for common, simple case. + */ + + if ((type1 == TCL_NUMBER_LONG) && (type2 == TCL_NUMBER_LONG)) { + l1 = *((const long *)ptr1); + l2 = *((const long *)ptr2); + + switch (*pc) { + case INST_MOD: + if (l2 == 0) { + TRACE(("%s %s => DIVIDE BY ZERO\n", O2S(valuePtr), + O2S(value2Ptr))); + goto divideByZero; + } else if ((l2 == 1) || (l2 == -1)) { + /* + * Div. by |1| always yields remainder of 0. + */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = TCONST(0); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } else if (l1 == 0) { + /* + * 0 % (non-zero) always yields remainder of 0. + */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = TCONST(0); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } else { + lResult = l1 / l2; + + /* + * Force Tcl's integer division rules. + * TODO: examine for logic simplification + */ + + if ((lResult < 0 || (lResult == 0 && + ((l1 < 0 && l2 > 0) || (l1 > 0 && l2 < 0)))) && + (lResult * l2 != l1)) { + lResult -= 1; + } + lResult = l1 - l2*lResult; + goto longResultOfArithmetic; + } + + case INST_RSHIFT: + if (l2 < 0) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "negative shift argument", -1)); +#ifdef ERROR_CODE_FOR_EARLY_DETECTED_ARITH_ERROR + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", + "domain error: argument not in valid range", + NULL); + CACHE_STACK_INFO(); +#endif /* ERROR_CODE_FOR_EARLY_DETECTED_ARITH_ERROR */ + goto gotError; + } else if (l1 == 0) { + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = TCONST(0); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } else { + /* + * Quickly force large right shifts to 0 or -1. + */ + + if (l2 >= (long)(CHAR_BIT*sizeof(long))) { + /* + * We assume that INT_MAX is much larger than the + * number of bits in a long. This is a pretty safe + * assumption, given that the former is usually around + * 4e9 and the latter 32 or 64... + */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (l1 > 0L) { + objResultPtr = TCONST(0); + } else { + TclNewIntObj(objResultPtr, -1); + } + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + + /* + * Handle shifts within the native long range. + */ + + lResult = l1 >> ((int) l2); + goto longResultOfArithmetic; + } + + case INST_LSHIFT: + if (l2 < 0) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "negative shift argument", -1)); +#ifdef ERROR_CODE_FOR_EARLY_DETECTED_ARITH_ERROR + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", + "domain error: argument not in valid range", + NULL); + CACHE_STACK_INFO(); +#endif /* ERROR_CODE_FOR_EARLY_DETECTED_ARITH_ERROR */ + goto gotError; + } else if (l1 == 0) { + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = TCONST(0); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } else if (l2 > (long) INT_MAX) { + /* + * Technically, we could hold the value (1 << (INT_MAX+1)) + * in an mp_int, but since we're using mp_mul_2d() to do + * the work, and it takes only an int argument, that's a + * good place to draw the line. + */ + + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "integer value too large to represent", -1)); +#ifdef ERROR_CODE_FOR_EARLY_DETECTED_ARITH_ERROR + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "ARITH", "IOVERFLOW", + "integer value too large to represent", NULL); + CACHE_STACK_INFO(); +#endif /* ERROR_CODE_FOR_EARLY_DETECTED_ARITH_ERROR */ + goto gotError; + } else { + int shift = (int) l2; + + /* + * Handle shifts within the native long range. + */ + + if ((size_t) shift < CHAR_BIT*sizeof(long) && (l1 != 0) + && !((l1>0 ? l1 : ~l1) & + -(1L<<(CHAR_BIT*sizeof(long) - 1 - shift)))) { + lResult = l1 << shift; + goto longResultOfArithmetic; + } + } + + /* + * Too large; need to use the broken-out function. + */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + break; + + case INST_BITAND: + lResult = l1 & l2; + goto longResultOfArithmetic; + case INST_BITOR: + lResult = l1 | l2; + goto longResultOfArithmetic; + case INST_BITXOR: + lResult = l1 ^ l2; + longResultOfArithmetic: + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr, lResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + TclSetLongObj(valuePtr, lResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } + } + + /* + * DO NOT MERGE THIS WITH THE EQUIVALENT SECTION LATER! That would + * encourage the compiler to inline ExecuteExtendedBinaryMathOp, which + * is highly undesirable due to the overall impact on size. + */ + + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = ExecuteExtendedBinaryMathOp(interp, *pc, &TCONST(0), + valuePtr, value2Ptr); + if (objResultPtr == DIVIDED_BY_ZERO) { + TRACE_APPEND(("DIVIDE BY ZERO\n")); + goto divideByZero; + } else if (objResultPtr == GENERAL_ARITHMETIC_ERROR) { + TRACE_ERROR(interp); + goto gotError; + } else if (objResultPtr == NULL) { + TRACE_APPEND(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } else { + TRACE_APPEND(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + + case INST_EXPON: + case INST_ADD: + case INST_SUB: + case INST_DIV: + case INST_MULT: + value2Ptr = OBJ_AT_TOS; + valuePtr = OBJ_UNDER_TOS; + + if ((GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) + || IsErroringNaNType(type1)) { + TRACE(("%.20s %.20s => ILLEGAL 1st TYPE %s\n", + O2S(value2Ptr), O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name: "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto gotError; + } + +#ifdef ACCEPT_NAN + if (type1 == TCL_NUMBER_NAN) { + /* + * NaN first argument -> result is also NaN. + */ + + NEXT_INST_F(1, 1, 0); + } +#endif + + if ((GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2) != TCL_OK) + || IsErroringNaNType(type2)) { + TRACE(("%.20s %.20s => ILLEGAL 2nd TYPE %s\n", + O2S(value2Ptr), O2S(valuePtr), + (value2Ptr->typePtr? value2Ptr->typePtr->name: "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, value2Ptr); + CACHE_STACK_INFO(); + goto gotError; + } + +#ifdef ACCEPT_NAN + if (type2 == TCL_NUMBER_NAN) { + /* + * NaN second argument -> result is also NaN. + */ + + objResultPtr = value2Ptr; + NEXT_INST_F(1, 2, 1); + } +#endif + + /* + * Handle (long,long) arithmetic as best we can without going out to + * an external function. + */ + + if ((type1 == TCL_NUMBER_LONG) && (type2 == TCL_NUMBER_LONG)) { + Tcl_WideInt w1, w2, wResult; + + l1 = *((const long *)ptr1); + l2 = *((const long *)ptr2); + + switch (*pc) { + case INST_ADD: + w1 = (Tcl_WideInt) l1; + w2 = (Tcl_WideInt) l2; + wResult = w1 + w2; +#ifdef TCL_WIDE_INT_IS_LONG + /* + * Check for overflow. + */ + + if (Overflowing(w1, w2, wResult)) { + goto overflow; + } +#endif + goto wideResultOfArithmetic; + + case INST_SUB: + w1 = (Tcl_WideInt) l1; + w2 = (Tcl_WideInt) l2; + wResult = w1 - w2; +#ifdef TCL_WIDE_INT_IS_LONG + /* + * Must check for overflow. The macro tests for overflows in + * sums by looking at the sign bits. As we have a subtraction + * here, we are adding -w2. As -w2 could in turn overflow, we + * test with ~w2 instead: it has the opposite sign bit to w2 + * so it does the job. Note that the only "bad" case (w2==0) + * is irrelevant for this macro, as in that case w1 and + * wResult have the same sign and there is no overflow anyway. + */ + + if (Overflowing(w1, ~w2, wResult)) { + goto overflow; + } +#endif + wideResultOfArithmetic: + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + if (Tcl_IsShared(valuePtr)) { + objResultPtr = Tcl_NewWideIntObj(wResult); + TRACE(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + Tcl_SetWideIntObj(valuePtr, wResult); + TRACE(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + + case INST_DIV: + if (l2 == 0) { + TRACE(("%s %s => DIVIDE BY ZERO\n", + O2S(valuePtr), O2S(value2Ptr))); + goto divideByZero; + } else if ((l1 == LONG_MIN) && (l2 == -1)) { + /* + * Can't represent (-LONG_MIN) as a long. + */ + + goto overflow; + } + lResult = l1 / l2; + + /* + * Force Tcl's integer division rules. + * TODO: examine for logic simplification + */ + + if (((lResult < 0) || ((lResult == 0) && + ((l1 < 0 && l2 > 0) || (l1 > 0 && l2 < 0)))) && + ((lResult * l2) != l1)) { + lResult -= 1; + } + goto longResultOfArithmetic; + + case INST_MULT: + if (((sizeof(long) >= 2*sizeof(int)) + && (l1 <= INT_MAX) && (l1 >= INT_MIN) + && (l2 <= INT_MAX) && (l2 >= INT_MIN)) + || ((sizeof(long) >= 2*sizeof(short)) + && (l1 <= SHRT_MAX) && (l1 >= SHRT_MIN) + && (l2 <= SHRT_MAX) && (l2 >= SHRT_MIN))) { + lResult = l1 * l2; + goto longResultOfArithmetic; + } + } + + /* + * Fall through with INST_EXPON, INST_DIV and large multiplies. + */ + } + + overflow: + TRACE(("%s %s => ", O2S(valuePtr), O2S(value2Ptr))); + objResultPtr = ExecuteExtendedBinaryMathOp(interp, *pc, &TCONST(0), + valuePtr, value2Ptr); + if (objResultPtr == DIVIDED_BY_ZERO) { + TRACE_APPEND(("DIVIDE BY ZERO\n")); + goto divideByZero; + } else if (objResultPtr == EXPONENT_OF_ZERO) { + TRACE_APPEND(("EXPONENT OF ZERO\n")); + goto exponOfZero; + } else if (objResultPtr == GENERAL_ARITHMETIC_ERROR) { + TRACE_ERROR(interp); + goto gotError; + } else if (objResultPtr == NULL) { + TRACE_APPEND(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 1, 0); + } else { + TRACE_APPEND(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + } + + case INST_LNOT: { + int b; + + valuePtr = OBJ_AT_TOS; + + /* TODO - check claim that taking address of b harms performance */ + /* TODO - consider optimization search for constants */ + if (TclGetBooleanFromObj(NULL, valuePtr, &b) != TCL_OK) { + TRACE(("\"%.20s\" => ERROR: illegal type %s\n", O2S(valuePtr), + (valuePtr->typePtr? valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto gotError; + } + /* TODO: Consider peephole opt. */ + objResultPtr = TCONST(!b); + TRACE_WITH_OBJ(("%s => ", O2S(valuePtr)), objResultPtr); + NEXT_INST_F(1, 1, 1); + } + + case INST_BITNOT: + valuePtr = OBJ_AT_TOS; + TRACE(("\"%.20s\" => ", O2S(valuePtr))); + if ((GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) + || (type1==TCL_NUMBER_NAN) || (type1==TCL_NUMBER_DOUBLE)) { + /* + * ... ~$NonInteger => raise an error. + */ + + TRACE_APPEND(("ERROR: illegal type %s\n", + (valuePtr->typePtr? valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto gotError; + } + if (type1 == TCL_NUMBER_LONG) { + l1 = *((const long *) ptr1); + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr, ~l1); + TRACE_APPEND(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + } + TclSetLongObj(valuePtr, ~l1); + TRACE_APPEND(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); + } + objResultPtr = ExecuteExtendedUnaryMathOp(*pc, valuePtr); + if (objResultPtr != NULL) { + TRACE_APPEND(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + } else { + TRACE_APPEND(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); + } + + case INST_UMINUS: + valuePtr = OBJ_AT_TOS; + TRACE(("\"%.20s\" => ", O2S(valuePtr))); + if ((GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) + || IsErroringNaNType(type1)) { + TRACE_APPEND(("ERROR: illegal type %s \n", + (valuePtr->typePtr? valuePtr->typePtr->name : "null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto gotError; + } + switch (type1) { + case TCL_NUMBER_NAN: + /* -NaN => NaN */ + TRACE_APPEND(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); + case TCL_NUMBER_LONG: + l1 = *((const long *) ptr1); + if (l1 != LONG_MIN) { + if (Tcl_IsShared(valuePtr)) { + TclNewLongObj(objResultPtr, -l1); + TRACE_APPEND(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + } + TclSetLongObj(valuePtr, -l1); + TRACE_APPEND(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); + } + /* FALLTHROUGH */ + } + objResultPtr = ExecuteExtendedUnaryMathOp(*pc, valuePtr); + if (objResultPtr != NULL) { + TRACE_APPEND(("%s\n", O2S(objResultPtr))); + NEXT_INST_F(1, 1, 1); + } else { + TRACE_APPEND(("%s\n", O2S(valuePtr))); + NEXT_INST_F(1, 0, 0); + } + + case INST_UPLUS: + case INST_TRY_CVT_TO_NUMERIC: + /* + * Try to convert the topmost stack object to numeric object. This is + * done in order to support [expr]'s policy of interpreting operands + * if at all possible as numbers first, then strings. + */ + + valuePtr = OBJ_AT_TOS; + TRACE(("\"%.20s\" => ", O2S(valuePtr))); + + if (GetNumberFromObj(NULL, valuePtr, &ptr1, &type1) != TCL_OK) { + if (*pc == INST_UPLUS) { + /* + * ... +$NonNumeric => raise an error. + */ + + TRACE_APPEND(("ERROR: illegal type %s\n", + (valuePtr->typePtr? valuePtr->typePtr->name:"null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + goto gotError; + } + + /* ... TryConvertToNumeric($NonNumeric) is acceptable */ + TRACE_APPEND(("not numeric\n")); + NEXT_INST_F(1, 0, 0); + } + if (IsErroringNaNType(type1)) { + if (*pc == INST_UPLUS) { + /* + * ... +$NonNumeric => raise an error. + */ + + TRACE_APPEND(("ERROR: illegal type %s\n", + (valuePtr->typePtr? valuePtr->typePtr->name:"null"))); + DECACHE_STACK_INFO(); + IllegalExprOperandType(interp, pc, valuePtr); + CACHE_STACK_INFO(); + } else { + /* + * Numeric conversion of NaN -> error. + */ + + TRACE_APPEND(("ERROR: IEEE floating pt error\n")); + DECACHE_STACK_INFO(); + TclExprFloatError(interp, *((const double *) ptr1)); + CACHE_STACK_INFO(); + } + goto gotError; + } + + /* + * Ensure that the numeric value has a string rep the same as the + * formatted version of its internal rep. This is used, e.g., to make + * sure that "expr {0001}" yields "1", not "0001". We implement this + * by _discarding_ the string rep since we know it will be + * regenerated, if needed later, by formatting the internal rep's + * value. + */ + + if (valuePtr->bytes == NULL) { + TRACE_APPEND(("numeric, same Tcl_Obj\n")); + NEXT_INST_F(1, 0, 0); + } + if (Tcl_IsShared(valuePtr)) { + /* + * Here we do some surgery within the Tcl_Obj internals. We want + * to copy the intrep, but not the string, so we temporarily hide + * the string so we do not copy it. + */ + + char *savedString = valuePtr->bytes; + + valuePtr->bytes = NULL; + objResultPtr = Tcl_DuplicateObj(valuePtr); + valuePtr->bytes = savedString; + TRACE_APPEND(("numeric, new Tcl_Obj\n")); + NEXT_INST_F(1, 1, 1); + } + TclInvalidateStringRep(valuePtr); + TRACE_APPEND(("numeric, same Tcl_Obj\n")); + NEXT_INST_F(1, 0, 0); + } + + /* + * End of numeric operator instructions. + * ----------------------------------------------------------------- + */ + + case INST_TRY_CVT_TO_BOOLEAN: + valuePtr = OBJ_AT_TOS; + if (valuePtr->typePtr == &tclBooleanType) { + objResultPtr = TCONST(1); + } else { + int result = (TclSetBooleanFromAny(NULL, valuePtr) == TCL_OK); + objResultPtr = TCONST(result); + } + TRACE_WITH_OBJ(("\"%.30s\" => ", O2S(valuePtr)), objResultPtr); + NEXT_INST_F(1, 0, 1); + + case INST_BREAK: + /* + DECACHE_STACK_INFO(); + Tcl_ResetResult(interp); + CACHE_STACK_INFO(); + */ + result = TCL_BREAK; + cleanup = 0; + TRACE(("=> BREAK!\n")); + goto processExceptionReturn; + + case INST_CONTINUE: + /* + DECACHE_STACK_INFO(); + Tcl_ResetResult(interp); + CACHE_STACK_INFO(); + */ + result = TCL_CONTINUE; + cleanup = 0; + TRACE(("=> CONTINUE!\n")); + goto processExceptionReturn; + + { + ForeachInfo *infoPtr; + Var *iterVarPtr, *listVarPtr; + Tcl_Obj *oldValuePtr, *listPtr, **elements; + ForeachVarList *varListPtr; + int numLists, iterNum, listTmpIndex, listLen, numVars; + int varIndex, valIndex, continueLoop, j, iterTmpIndex; + long i; + + case INST_FOREACH_START4: /* DEPRECATED */ + /* + * Initialize the temporary local var that holds the count of the + * number of iterations of the loop body to -1. + */ + + opnd = TclGetUInt4AtPtr(pc+1); + infoPtr = codePtr->auxDataArrayPtr[opnd].clientData; + iterTmpIndex = infoPtr->loopCtTemp; + iterVarPtr = LOCAL(iterTmpIndex); + oldValuePtr = iterVarPtr->value.objPtr; + + if (oldValuePtr == NULL) { + TclNewLongObj(iterVarPtr->value.objPtr, -1); + Tcl_IncrRefCount(iterVarPtr->value.objPtr); + } else { + TclSetLongObj(oldValuePtr, -1); + } + TRACE(("%u => loop iter count temp %d\n", opnd, iterTmpIndex)); + +#ifndef TCL_COMPILE_DEBUG + /* + * Remark that the compiler ALWAYS sets INST_FOREACH_STEP4 immediately + * after INST_FOREACH_START4 - let us just fall through instead of + * jumping back to the top. + */ + + pc += 5; + TCL_DTRACE_INST_NEXT(); +#else + NEXT_INST_F(5, 0, 0); +#endif + + case INST_FOREACH_STEP4: /* DEPRECATED */ + /* + * "Step" a foreach loop (i.e., begin its next iteration) by assigning + * the next value list element to each loop var. + */ + + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ", opnd)); + infoPtr = codePtr->auxDataArrayPtr[opnd].clientData; + numLists = infoPtr->numLists; + + /* + * Increment the temp holding the loop iteration number. + */ + + iterVarPtr = LOCAL(infoPtr->loopCtTemp); + valuePtr = iterVarPtr->value.objPtr; + iterNum = valuePtr->internalRep.longValue + 1; + TclSetLongObj(valuePtr, iterNum); + + /* + * Check whether all value lists are exhausted and we should stop the + * loop. + */ + + continueLoop = 0; + listTmpIndex = infoPtr->firstValueTemp; + for (i = 0; i < numLists; i++) { + varListPtr = infoPtr->varLists[i]; + numVars = varListPtr->numVars; + + listVarPtr = LOCAL(listTmpIndex); + listPtr = listVarPtr->value.objPtr; + if (TclListObjLength(interp, listPtr, &listLen) != TCL_OK) { + TRACE_APPEND(("ERROR converting list %ld, \"%.30s\": %s\n", + i, O2S(listPtr), O2S(Tcl_GetObjResult(interp)))); + goto gotError; + } + if (listLen > iterNum * numVars) { + continueLoop = 1; + } + listTmpIndex++; + } + + /* + * If some var in some var list still has a remaining list element + * iterate one more time. Assign to var the next element from its + * value list. We already checked above that each list temp holds a + * valid list object (by calling Tcl_ListObjLength), but cannot rely + * on that check remaining valid: one list could have been shimmered + * as a side effect of setting a traced variable. + */ + + if (continueLoop) { + listTmpIndex = infoPtr->firstValueTemp; + for (i = 0; i < numLists; i++) { + varListPtr = infoPtr->varLists[i]; + numVars = varListPtr->numVars; + + listVarPtr = LOCAL(listTmpIndex); + listPtr = TclListObjCopy(NULL, listVarPtr->value.objPtr); + TclListObjGetElements(interp, listPtr, &listLen, &elements); + + valIndex = (iterNum * numVars); + for (j = 0; j < numVars; j++) { + if (valIndex >= listLen) { + TclNewObj(valuePtr); + } else { + valuePtr = elements[valIndex]; + } + + varIndex = varListPtr->varIndexes[j]; + varPtr = LOCAL(varIndex); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + if (TclIsVarDirectWritable(varPtr)) { + value2Ptr = varPtr->value.objPtr; + if (valuePtr != value2Ptr) { + if (value2Ptr != NULL) { + TclDecrRefCount(value2Ptr); + } + varPtr->value.objPtr = valuePtr; + Tcl_IncrRefCount(valuePtr); + } + } else { + DECACHE_STACK_INFO(); + if (TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + valuePtr, TCL_LEAVE_ERR_MSG, varIndex)==NULL){ + CACHE_STACK_INFO(); + TRACE_APPEND(( + "ERROR init. index temp %d: %s\n", + varIndex, O2S(Tcl_GetObjResult(interp)))); + TclDecrRefCount(listPtr); + goto gotError; + } + CACHE_STACK_INFO(); + } + valIndex++; + } + TclDecrRefCount(listPtr); + listTmpIndex++; + } + } + TRACE_APPEND(("%d lists, iter %d, %s loop\n", + numLists, iterNum, (continueLoop? "continue" : "exit"))); + + /* + * Run-time peep-hole optimisation: the compiler ALWAYS follows + * INST_FOREACH_STEP4 with an INST_JUMP_FALSE. We just skip that + * instruction and jump direct from here. + */ + + pc += 5; + if (*pc == INST_JUMP_FALSE1) { + NEXT_INST_F((continueLoop? 2 : TclGetInt1AtPtr(pc+1)), 0, 0); + } else { + NEXT_INST_F((continueLoop? 5 : TclGetInt4AtPtr(pc+1)), 0, 0); + } + + } + { + ForeachInfo *infoPtr; + Tcl_Obj *listPtr, **elements, *tmpPtr; + ForeachVarList *varListPtr; + int numLists, iterMax, listLen, numVars; + int iterTmp, iterNum, listTmpDepth; + int varIndex, valIndex, j; + long i; + + case INST_FOREACH_START: + /* + * Initialize the data for the looping construct, pushing the + * corresponding Tcl_Objs to the stack. + */ + + opnd = TclGetUInt4AtPtr(pc+1); + infoPtr = codePtr->auxDataArrayPtr[opnd].clientData; + numLists = infoPtr->numLists; + TRACE(("%u => ", opnd)); + + /* + * Compute the number of iterations that will be run: iterMax + */ + + iterMax = 0; + listTmpDepth = numLists-1; + for (i = 0; i < numLists; i++) { + varListPtr = infoPtr->varLists[i]; + numVars = varListPtr->numVars; + listPtr = OBJ_AT_DEPTH(listTmpDepth); + if (TclListObjLength(interp, listPtr, &listLen) != TCL_OK) { + TRACE_APPEND(("ERROR converting list %ld, \"%s\": %s", + i, O2S(listPtr), O2S(Tcl_GetObjResult(interp)))); + goto gotError; + } + if (Tcl_IsShared(listPtr)) { + objPtr = TclListObjCopy(NULL, listPtr); + Tcl_IncrRefCount(objPtr); + Tcl_DecrRefCount(listPtr); + OBJ_AT_DEPTH(listTmpDepth) = objPtr; + } + iterTmp = (listLen + (numVars - 1))/numVars; + if (iterTmp > iterMax) { + iterMax = iterTmp; + } + listTmpDepth--; + } + + /* + * Store the iterNum and iterMax in a single Tcl_Obj; we keep a + * nul-string obj with the pointer stored in the ptrValue so that the + * thing is properly garbage collected. THIS OBJ MAKES NO SENSE, but + * it will never leave this scope and is read-only. + */ + + TclNewObj(tmpPtr); + tmpPtr->internalRep.twoPtrValue.ptr1 = INT2PTR(0); + tmpPtr->internalRep.twoPtrValue.ptr2 = INT2PTR(iterMax); + PUSH_OBJECT(tmpPtr); /* iterCounts object */ + + /* + * Store a pointer to the ForeachInfo struct; same dirty trick + * as above + */ + + TclNewObj(tmpPtr); + tmpPtr->internalRep.twoPtrValue.ptr1 = infoPtr; + PUSH_OBJECT(tmpPtr); /* infoPtr object */ + TRACE_APPEND(("jump to loop step\n")); + + /* + * Jump directly to the INST_FOREACH_STEP instruction; the C code just + * falls through. + */ + + pc += 5 - infoPtr->loopCtTemp; + + case INST_FOREACH_STEP: + /* + * "Step" a foreach loop (i.e., begin its next iteration) by assigning + * the next value list element to each loop var. + */ + + tmpPtr = OBJ_AT_TOS; + infoPtr = tmpPtr->internalRep.twoPtrValue.ptr1; + numLists = infoPtr->numLists; + TRACE(("=> ")); + + tmpPtr = OBJ_AT_DEPTH(1); + iterNum = PTR2INT(tmpPtr->internalRep.twoPtrValue.ptr1); + iterMax = PTR2INT(tmpPtr->internalRep.twoPtrValue.ptr2); + + /* + * If some list still has a remaining list element iterate one more + * time. Assign to var the next element from its value list. + */ + + if (iterNum < iterMax) { + /* + * Set the variables and jump back to run the body + */ + + tmpPtr->internalRep.twoPtrValue.ptr1 = INT2PTR(iterNum + 1); + + listTmpDepth = numLists + 1; + + for (i = 0; i < numLists; i++) { + varListPtr = infoPtr->varLists[i]; + numVars = varListPtr->numVars; + + listPtr = OBJ_AT_DEPTH(listTmpDepth); + TclListObjGetElements(interp, listPtr, &listLen, &elements); + + valIndex = (iterNum * numVars); + for (j = 0; j < numVars; j++) { + if (valIndex >= listLen) { + TclNewObj(valuePtr); + } else { + valuePtr = elements[valIndex]; + } + + varIndex = varListPtr->varIndexes[j]; + varPtr = LOCAL(varIndex); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + if (TclIsVarDirectWritable(varPtr)) { + value2Ptr = varPtr->value.objPtr; + if (valuePtr != value2Ptr) { + if (value2Ptr != NULL) { + TclDecrRefCount(value2Ptr); + } + varPtr->value.objPtr = valuePtr; + Tcl_IncrRefCount(valuePtr); + } + } else { + DECACHE_STACK_INFO(); + if (TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + valuePtr, TCL_LEAVE_ERR_MSG, varIndex)==NULL){ + CACHE_STACK_INFO(); + TRACE_APPEND(("ERROR init. index temp %d: %.30s", + varIndex, O2S(Tcl_GetObjResult(interp)))); + goto gotError; + } + CACHE_STACK_INFO(); + } + valIndex++; + } + listTmpDepth--; + } + TRACE_APPEND(("jump to loop start\n")); + /* loopCtTemp being 'misused' for storing the jump size */ + NEXT_INST_F(infoPtr->loopCtTemp, 0, 0); + } + + TRACE_APPEND(("loop has no more iterations\n")); +#ifdef TCL_COMPILE_DEBUG + NEXT_INST_F(1, 0, 0); +#else + /* + * FALL THROUGH + */ + pc++; +#endif + + case INST_FOREACH_END: + /* THIS INSTRUCTION IS ONLY CALLED AS A BREAK TARGET */ + tmpPtr = OBJ_AT_TOS; + infoPtr = tmpPtr->internalRep.twoPtrValue.ptr1; + numLists = infoPtr->numLists; + TRACE(("=> loop terminated\n")); + NEXT_INST_V(1, numLists+2, 0); + + case INST_LMAP_COLLECT: + /* + * This instruction is only issued by lmap. The stack is: + * - result + * - infoPtr + * - loop counters + * - valLists + * - collecting obj (unshared) + * The instruction lappends the result to the collecting obj. + */ + + tmpPtr = OBJ_AT_DEPTH(1); + infoPtr = tmpPtr->internalRep.twoPtrValue.ptr1; + numLists = infoPtr->numLists; + TRACE_APPEND(("=> appending to list at depth %d\n", 3 + numLists)); + + objPtr = OBJ_AT_DEPTH(3 + numLists); + Tcl_ListObjAppendElement(NULL, objPtr, OBJ_AT_TOS); + NEXT_INST_F(1, 1, 0); + } + + case INST_BEGIN_CATCH4: + /* + * Record start of the catch command with exception range index equal + * to the operand. Push the current stack depth onto the special catch + * stack. + */ + + *(++catchTop) = CURR_DEPTH; + TRACE(("%u => catchTop=%d, stackTop=%d\n", + TclGetUInt4AtPtr(pc+1), (int) (catchTop - initCatchTop - 1), + (int) CURR_DEPTH)); + NEXT_INST_F(5, 0, 0); + + case INST_END_CATCH: + catchTop--; + DECACHE_STACK_INFO(); + Tcl_ResetResult(interp); + CACHE_STACK_INFO(); + result = TCL_OK; + TRACE(("=> catchTop=%d\n", (int) (catchTop - initCatchTop - 1))); + NEXT_INST_F(1, 0, 0); + + case INST_PUSH_RESULT: + objResultPtr = Tcl_GetObjResult(interp); + TRACE_WITH_OBJ(("=> "), objResultPtr); + + /* + * See the comments at INST_INVOKE_STK + */ + + TclNewObj(objPtr); + Tcl_IncrRefCount(objPtr); + iPtr->objResultPtr = objPtr; + NEXT_INST_F(1, 0, -1); + + case INST_PUSH_RETURN_CODE: + TclNewIntObj(objResultPtr, result); + TRACE(("=> %u\n", result)); + NEXT_INST_F(1, 0, 1); + + case INST_PUSH_RETURN_OPTIONS: + DECACHE_STACK_INFO(); + objResultPtr = Tcl_GetReturnOptions(interp, result); + CACHE_STACK_INFO(); + TRACE_WITH_OBJ(("=> "), objResultPtr); + NEXT_INST_F(1, 0, 1); + + case INST_RETURN_CODE_BRANCH: { + int code; + + if (TclGetIntFromObj(NULL, OBJ_AT_TOS, &code) != TCL_OK) { + Tcl_Panic("INST_RETURN_CODE_BRANCH: TOS not a return code!"); + } + if (code == TCL_OK) { + Tcl_Panic("INST_RETURN_CODE_BRANCH: TOS is TCL_OK!"); + } + if (code < TCL_ERROR || code > TCL_CONTINUE) { + code = TCL_CONTINUE + 1; + } + TRACE(("\"%s\" => jump offset %d\n", O2S(OBJ_AT_TOS), 2*code-1)); + NEXT_INST_F(2*code-1, 1, 0); + } + + /* + * ----------------------------------------------------------------- + * Start of dictionary-related instructions. + */ + + { + int opnd2, allocateDict, done, i, allocdict; + Tcl_Obj *dictPtr, *statePtr, *keyPtr, *listPtr, *varNamePtr, *keysPtr; + Tcl_Obj *emptyPtr, **keyPtrPtr; + Tcl_DictSearch *searchPtr; + DictUpdateInfo *duiPtr; + + case INST_DICT_VERIFY: + dictPtr = OBJ_AT_TOS; + TRACE(("\"%.30s\" => ", O2S(dictPtr))); + if (Tcl_DictObjSize(interp, dictPtr, &done) != TCL_OK) { + TRACE_APPEND(("ERROR verifying dictionary nature of \"%.30s\": %s\n", + O2S(dictPtr), O2S(Tcl_GetObjResult(interp)))); + goto gotError; + } + TRACE_APPEND(("OK\n")); + NEXT_INST_F(1, 1, 0); + + case INST_DICT_GET: + case INST_DICT_EXISTS: { + register Tcl_Interp *interp2 = interp; + register int found; + + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ", opnd)); + dictPtr = OBJ_AT_DEPTH(opnd); + if (*pc == INST_DICT_EXISTS) { + interp2 = NULL; + } + if (opnd > 1) { + dictPtr = TclTraceDictPath(interp2, dictPtr, opnd-1, + &OBJ_AT_DEPTH(opnd-1), DICT_PATH_READ); + if (dictPtr == NULL) { + if (*pc == INST_DICT_EXISTS) { + found = 0; + goto afterDictExists; + } + TRACE_WITH_OBJ(( + "ERROR tracing dictionary path into \"%.30s\": ", + O2S(OBJ_AT_DEPTH(opnd))), + Tcl_GetObjResult(interp)); + goto gotError; + } + } + if (Tcl_DictObjGet(interp2, dictPtr, OBJ_AT_TOS, + &objResultPtr) == TCL_OK) { + if (*pc == INST_DICT_EXISTS) { + found = (objResultPtr ? 1 : 0); + goto afterDictExists; + } + if (!objResultPtr) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "key \"%s\" not known in dictionary", + TclGetString(OBJ_AT_TOS))); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "DICT", + TclGetString(OBJ_AT_TOS), NULL); + CACHE_STACK_INFO(); + TRACE_ERROR(interp); + goto gotError; + } + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_V(5, opnd+1, 1); + } else if (*pc != INST_DICT_EXISTS) { + TRACE_APPEND(("ERROR reading leaf dictionary key \"%.30s\": %s", + O2S(dictPtr), O2S(Tcl_GetObjResult(interp)))); + goto gotError; + } else { + found = 0; + } + afterDictExists: + TRACE_APPEND(("%d\n", found)); + + /* + * The INST_DICT_EXISTS instruction is usually followed by a + * conditional jump, so we can take advantage of this to do some + * peephole optimization (note that we're careful to not close out + * someone doing something else). + */ + + JUMP_PEEPHOLE_V(found, 5, opnd+1); + } + + case INST_DICT_SET: + case INST_DICT_UNSET: + case INST_DICT_INCR_IMM: + opnd = TclGetUInt4AtPtr(pc+1); + opnd2 = TclGetUInt4AtPtr(pc+5); + + varPtr = LOCAL(opnd2); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u %u => ", opnd, opnd2)); + if (TclIsVarDirectReadable(varPtr)) { + dictPtr = varPtr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + dictPtr = TclPtrGetVar(interp, varPtr, NULL,NULL,NULL, 0, opnd2); + CACHE_STACK_INFO(); + } + if (dictPtr == NULL) { + TclNewObj(dictPtr); + allocateDict = 1; + } else { + allocateDict = Tcl_IsShared(dictPtr); + if (allocateDict) { + dictPtr = Tcl_DuplicateObj(dictPtr); + } + } + + switch (*pc) { + case INST_DICT_SET: + cleanup = opnd + 1; + result = Tcl_DictObjPutKeyList(interp, dictPtr, opnd, + &OBJ_AT_DEPTH(opnd), OBJ_AT_TOS); + break; + case INST_DICT_INCR_IMM: + cleanup = 1; + opnd = TclGetInt4AtPtr(pc+1); + result = Tcl_DictObjGet(interp, dictPtr, OBJ_AT_TOS, &valuePtr); + if (result != TCL_OK) { + break; + } + if (valuePtr == NULL) { + Tcl_DictObjPut(NULL, dictPtr, OBJ_AT_TOS,Tcl_NewIntObj(opnd)); + } else { + value2Ptr = Tcl_NewIntObj(opnd); + Tcl_IncrRefCount(value2Ptr); + if (Tcl_IsShared(valuePtr)) { + valuePtr = Tcl_DuplicateObj(valuePtr); + Tcl_DictObjPut(NULL, dictPtr, OBJ_AT_TOS, valuePtr); + } + result = TclIncrObj(interp, valuePtr, value2Ptr); + if (result == TCL_OK) { + TclInvalidateStringRep(dictPtr); + } + TclDecrRefCount(value2Ptr); + } + break; + case INST_DICT_UNSET: + cleanup = opnd; + result = Tcl_DictObjRemoveKeyList(interp, dictPtr, opnd, + &OBJ_AT_DEPTH(opnd-1)); + break; + default: + cleanup = 0; /* stop compiler warning */ + Tcl_Panic("Should not happen!"); + } + + if (result != TCL_OK) { + if (allocateDict) { + TclDecrRefCount(dictPtr); + } + TRACE_APPEND(("ERROR updating dictionary: %s\n", + O2S(Tcl_GetObjResult(interp)))); + goto checkForCatch; + } + + if (TclIsVarDirectWritable(varPtr)) { + if (allocateDict) { + value2Ptr = varPtr->value.objPtr; + Tcl_IncrRefCount(dictPtr); + if (value2Ptr != NULL) { + TclDecrRefCount(value2Ptr); + } + varPtr->value.objPtr = dictPtr; + } + objResultPtr = dictPtr; + } else { + Tcl_IncrRefCount(dictPtr); + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + dictPtr, TCL_LEAVE_ERR_MSG, opnd2); + CACHE_STACK_INFO(); + TclDecrRefCount(dictPtr); + if (objResultPtr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + } +#ifndef TCL_COMPILE_DEBUG + if (*(pc+9) == INST_POP) { + NEXT_INST_V(10, cleanup, 0); + } +#endif + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_V(9, cleanup, 1); + + case INST_DICT_APPEND: + case INST_DICT_LAPPEND: + opnd = TclGetUInt4AtPtr(pc+1); + varPtr = LOCAL(opnd); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + TRACE(("%u => ", opnd)); + if (TclIsVarDirectReadable(varPtr)) { + dictPtr = varPtr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + dictPtr = TclPtrGetVar(interp, varPtr, NULL, NULL, NULL, 0, opnd); + CACHE_STACK_INFO(); + } + if (dictPtr == NULL) { + TclNewObj(dictPtr); + allocateDict = 1; + } else { + allocateDict = Tcl_IsShared(dictPtr); + if (allocateDict) { + dictPtr = Tcl_DuplicateObj(dictPtr); + } + } + + if (Tcl_DictObjGet(interp, dictPtr, OBJ_UNDER_TOS, + &valuePtr) != TCL_OK) { + if (allocateDict) { + TclDecrRefCount(dictPtr); + } + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Note that a non-existent key results in a NULL valuePtr, which is a + * case handled separately below. What we *can* say at this point is + * that the write-back will always succeed. + */ + + switch (*pc) { + case INST_DICT_APPEND: + if (valuePtr == NULL) { + Tcl_DictObjPut(NULL, dictPtr, OBJ_UNDER_TOS, OBJ_AT_TOS); + } else if (Tcl_IsShared(valuePtr)) { + valuePtr = Tcl_DuplicateObj(valuePtr); + Tcl_AppendObjToObj(valuePtr, OBJ_AT_TOS); + Tcl_DictObjPut(NULL, dictPtr, OBJ_UNDER_TOS, valuePtr); + } else { + Tcl_AppendObjToObj(valuePtr, OBJ_AT_TOS); + + /* + * Must invalidate the string representation of dictionary + * here because we have directly updated the internal + * representation; if we don't, callers could see the wrong + * string rep despite the internal version of the dictionary + * having the correct value. [Bug 3079830] + */ + + TclInvalidateStringRep(dictPtr); + } + break; + case INST_DICT_LAPPEND: + /* + * More complex because list-append can fail. + */ + + if (valuePtr == NULL) { + Tcl_DictObjPut(NULL, dictPtr, OBJ_UNDER_TOS, + Tcl_NewListObj(1, &OBJ_AT_TOS)); + break; + } else if (Tcl_IsShared(valuePtr)) { + valuePtr = Tcl_DuplicateObj(valuePtr); + if (Tcl_ListObjAppendElement(interp, valuePtr, + OBJ_AT_TOS) != TCL_OK) { + TclDecrRefCount(valuePtr); + if (allocateDict) { + TclDecrRefCount(dictPtr); + } + TRACE_ERROR(interp); + goto gotError; + } + Tcl_DictObjPut(NULL, dictPtr, OBJ_UNDER_TOS, valuePtr); + } else { + if (Tcl_ListObjAppendElement(interp, valuePtr, + OBJ_AT_TOS) != TCL_OK) { + if (allocateDict) { + TclDecrRefCount(dictPtr); + } + TRACE_ERROR(interp); + goto gotError; + } + + /* + * Must invalidate the string representation of dictionary + * here because we have directly updated the internal + * representation; if we don't, callers could see the wrong + * string rep despite the internal version of the dictionary + * having the correct value. [Bug 3079830] + */ + + TclInvalidateStringRep(dictPtr); + } + break; + default: + Tcl_Panic("Should not happen!"); + } + + if (TclIsVarDirectWritable(varPtr)) { + if (allocateDict) { + value2Ptr = varPtr->value.objPtr; + Tcl_IncrRefCount(dictPtr); + if (value2Ptr != NULL) { + TclDecrRefCount(value2Ptr); + } + varPtr->value.objPtr = dictPtr; + } + objResultPtr = dictPtr; + } else { + Tcl_IncrRefCount(dictPtr); + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + dictPtr, TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + TclDecrRefCount(dictPtr); + if (objResultPtr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + } +#ifndef TCL_COMPILE_DEBUG + if (*(pc+5) == INST_POP) { + NEXT_INST_F(6, 2, 0); + } +#endif + TRACE_APPEND(("%.30s\n", O2S(objResultPtr))); + NEXT_INST_F(5, 2, 1); + + case INST_DICT_FIRST: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ", opnd)); + dictPtr = POP_OBJECT(); + searchPtr = ckalloc(sizeof(Tcl_DictSearch)); + if (Tcl_DictObjFirst(interp, dictPtr, searchPtr, &keyPtr, + &valuePtr, &done) != TCL_OK) { + + /* + * dictPtr is no longer on the stack, and we're not + * moving it into the intrep of an iterator. We need + * to drop the refcount [Tcl Bug 9b352768e6]. + */ + + Tcl_DecrRefCount(dictPtr); + ckfree(searchPtr); + TRACE_ERROR(interp); + goto gotError; + } + TclNewObj(statePtr); + statePtr->typePtr = &dictIteratorType; + statePtr->internalRep.twoPtrValue.ptr1 = searchPtr; + statePtr->internalRep.twoPtrValue.ptr2 = dictPtr; + varPtr = LOCAL(opnd); + if (varPtr->value.objPtr) { + if (varPtr->value.objPtr->typePtr == &dictIteratorType) { + Tcl_Panic("mis-issued dictFirst!"); + } + TclDecrRefCount(varPtr->value.objPtr); + } + varPtr->value.objPtr = statePtr; + Tcl_IncrRefCount(statePtr); + goto pushDictIteratorResult; + + case INST_DICT_NEXT: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ", opnd)); + statePtr = (*LOCAL(opnd)).value.objPtr; + if (statePtr == NULL || statePtr->typePtr != &dictIteratorType) { + Tcl_Panic("mis-issued dictNext!"); + } + searchPtr = statePtr->internalRep.twoPtrValue.ptr1; + Tcl_DictObjNext(searchPtr, &keyPtr, &valuePtr, &done); + pushDictIteratorResult: + if (done) { + TclNewObj(emptyPtr); + PUSH_OBJECT(emptyPtr); + PUSH_OBJECT(emptyPtr); + } else { + PUSH_OBJECT(valuePtr); + PUSH_OBJECT(keyPtr); + } + TRACE_APPEND(("\"%.30s\" \"%.30s\" %d\n", + O2S(OBJ_UNDER_TOS), O2S(OBJ_AT_TOS), done)); + + /* + * The INST_DICT_FIRST and INST_DICT_NEXT instructsions are always + * followed by a conditional jump, so we can take advantage of this to + * do some peephole optimization (note that we're careful to not close + * out someone doing something else). + */ + + JUMP_PEEPHOLE_F(done, 5, 0); + + case INST_DICT_UPDATE_START: + opnd = TclGetUInt4AtPtr(pc+1); + opnd2 = TclGetUInt4AtPtr(pc+5); + TRACE(("%u => ", opnd)); + varPtr = LOCAL(opnd); + duiPtr = codePtr->auxDataArrayPtr[opnd2].clientData; + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + if (TclIsVarDirectReadable(varPtr)) { + dictPtr = varPtr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + dictPtr = TclPtrGetVar(interp, varPtr, NULL, NULL, NULL, + TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + if (dictPtr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + } + Tcl_IncrRefCount(dictPtr); + if (TclListObjGetElements(interp, OBJ_AT_TOS, &length, + &keyPtrPtr) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + if (length != duiPtr->length) { + Tcl_Panic("dictUpdateStart argument length mismatch"); + } + for (i=0 ; i<length ; i++) { + if (Tcl_DictObjGet(interp, dictPtr, keyPtrPtr[i], + &valuePtr) != TCL_OK) { + TRACE_ERROR(interp); + Tcl_DecrRefCount(dictPtr); + goto gotError; + } + varPtr = LOCAL(duiPtr->varIndices[i]); + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + DECACHE_STACK_INFO(); + if (valuePtr == NULL) { + TclObjUnsetVar2(interp, + localName(iPtr->varFramePtr, duiPtr->varIndices[i]), + NULL, 0); + } else if (TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + valuePtr, TCL_LEAVE_ERR_MSG, + duiPtr->varIndices[i]) == NULL) { + CACHE_STACK_INFO(); + TRACE_ERROR(interp); + Tcl_DecrRefCount(dictPtr); + goto gotError; + } + CACHE_STACK_INFO(); + } + TclDecrRefCount(dictPtr); + TRACE_APPEND(("OK\n")); + NEXT_INST_F(9, 0, 0); + + case INST_DICT_UPDATE_END: + opnd = TclGetUInt4AtPtr(pc+1); + opnd2 = TclGetUInt4AtPtr(pc+5); + TRACE(("%u => ", opnd)); + varPtr = LOCAL(opnd); + duiPtr = codePtr->auxDataArrayPtr[opnd2].clientData; + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + if (TclIsVarDirectReadable(varPtr)) { + dictPtr = varPtr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + dictPtr = TclPtrGetVar(interp, varPtr, NULL, NULL, NULL, 0, opnd); + CACHE_STACK_INFO(); + } + if (dictPtr == NULL) { + TRACE_APPEND(("storage was unset\n")); + NEXT_INST_F(9, 1, 0); + } + if (Tcl_DictObjSize(interp, dictPtr, &length) != TCL_OK + || TclListObjGetElements(interp, OBJ_AT_TOS, &length, + &keyPtrPtr) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + allocdict = Tcl_IsShared(dictPtr); + if (allocdict) { + dictPtr = Tcl_DuplicateObj(dictPtr); + } + if (length > 0) { + TclInvalidateStringRep(dictPtr); + } + for (i=0 ; i<length ; i++) { + Var *var2Ptr = LOCAL(duiPtr->varIndices[i]); + + while (TclIsVarLink(var2Ptr)) { + var2Ptr = var2Ptr->value.linkPtr; + } + if (TclIsVarDirectReadable(var2Ptr)) { + valuePtr = var2Ptr->value.objPtr; + } else { + DECACHE_STACK_INFO(); + valuePtr = TclPtrGetVar(interp, var2Ptr, NULL, NULL, NULL, 0, + duiPtr->varIndices[i]); + CACHE_STACK_INFO(); + } + if (valuePtr == NULL) { + Tcl_DictObjRemove(interp, dictPtr, keyPtrPtr[i]); + } else if (dictPtr == valuePtr) { + Tcl_DictObjPut(interp, dictPtr, keyPtrPtr[i], + Tcl_DuplicateObj(valuePtr)); + } else { + Tcl_DictObjPut(interp, dictPtr, keyPtrPtr[i], valuePtr); + } + } + if (TclIsVarDirectWritable(varPtr)) { + Tcl_IncrRefCount(dictPtr); + TclDecrRefCount(varPtr->value.objPtr); + varPtr->value.objPtr = dictPtr; + } else { + DECACHE_STACK_INFO(); + objResultPtr = TclPtrSetVar(interp, varPtr, NULL, NULL, NULL, + dictPtr, TCL_LEAVE_ERR_MSG, opnd); + CACHE_STACK_INFO(); + if (objResultPtr == NULL) { + if (allocdict) { + TclDecrRefCount(dictPtr); + } + TRACE_ERROR(interp); + goto gotError; + } + } + TRACE_APPEND(("written back\n")); + NEXT_INST_F(9, 1, 0); + + case INST_DICT_EXPAND: + dictPtr = OBJ_UNDER_TOS; + listPtr = OBJ_AT_TOS; + TRACE(("\"%.30s\" \"%.30s\" =>", O2S(dictPtr), O2S(listPtr))); + if (TclListObjGetElements(interp, listPtr, &objc, &objv) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + objResultPtr = TclDictWithInit(interp, dictPtr, objc, objv); + if (objResultPtr == NULL) { + TRACE_ERROR(interp); + goto gotError; + } + TRACE_APPEND(("\"%.30s\"\n", O2S(objResultPtr))); + NEXT_INST_F(1, 2, 1); + + case INST_DICT_RECOMBINE_STK: + keysPtr = POP_OBJECT(); + varNamePtr = OBJ_UNDER_TOS; + listPtr = OBJ_AT_TOS; + TRACE(("\"%.30s\" \"%.30s\" \"%.30s\" => ", + O2S(varNamePtr), O2S(valuePtr), O2S(keysPtr))); + if (TclListObjGetElements(interp, listPtr, &objc, &objv) != TCL_OK) { + TRACE_ERROR(interp); + TclDecrRefCount(keysPtr); + goto gotError; + } + varPtr = TclObjLookupVarEx(interp, varNamePtr, NULL, + TCL_LEAVE_ERR_MSG, "set", 1, 1, &arrayPtr); + if (varPtr == NULL) { + TRACE_ERROR(interp); + TclDecrRefCount(keysPtr); + goto gotError; + } + DECACHE_STACK_INFO(); + result = TclDictWithFinish(interp, varPtr,arrayPtr,varNamePtr,NULL,-1, + objc, objv, keysPtr); + CACHE_STACK_INFO(); + TclDecrRefCount(keysPtr); + if (result != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + TRACE_APPEND(("OK\n")); + NEXT_INST_F(1, 2, 0); + + case INST_DICT_RECOMBINE_IMM: + opnd = TclGetUInt4AtPtr(pc+1); + listPtr = OBJ_UNDER_TOS; + keysPtr = OBJ_AT_TOS; + varPtr = LOCAL(opnd); + TRACE(("%u <- \"%.30s\" \"%.30s\" => ", opnd, O2S(valuePtr), + O2S(keysPtr))); + if (TclListObjGetElements(interp, listPtr, &objc, &objv) != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + while (TclIsVarLink(varPtr)) { + varPtr = varPtr->value.linkPtr; + } + DECACHE_STACK_INFO(); + result = TclDictWithFinish(interp, varPtr, NULL, NULL, NULL, opnd, + objc, objv, keysPtr); + CACHE_STACK_INFO(); + if (result != TCL_OK) { + TRACE_ERROR(interp); + goto gotError; + } + TRACE_APPEND(("OK\n")); + NEXT_INST_F(5, 2, 0); + } + + /* + * End of dictionary-related instructions. + * ----------------------------------------------------------------- + */ + + default: + Tcl_Panic("TclNRExecuteByteCode: unrecognized opCode %u", *pc); + } /* end of switch on opCode */ + + /* + * Block for variables needed to process exception returns. + */ + + { + ExceptionRange *rangePtr; + /* Points to closest loop or catch exception + * range enclosing the pc. Used by various + * instructions and processCatch to process + * break, continue, and errors. */ + const char *bytes; + + /* + * An external evaluation (INST_INVOKE or INST_EVAL) returned + * something different from TCL_OK, or else INST_BREAK or + * INST_CONTINUE were called. + */ + + processExceptionReturn: +#ifdef TCL_COMPILE_DEBUG + switch (*pc) { + case INST_INVOKE_STK1: + opnd = TclGetUInt1AtPtr(pc+1); + TRACE(("%u => ... after \"%.20s\": ", opnd, cmdNameBuf)); + break; + case INST_INVOKE_STK4: + opnd = TclGetUInt4AtPtr(pc+1); + TRACE(("%u => ... after \"%.20s\": ", opnd, cmdNameBuf)); + break; + case INST_EVAL_STK: + /* + * Note that the object at stacktop has to be used before doing + * the cleanup. + */ + + TRACE(("\"%.30s\" => ", O2S(OBJ_AT_TOS))); + break; + default: + TRACE(("=> ")); + } +#endif + if ((result == TCL_CONTINUE) || (result == TCL_BREAK)) { + rangePtr = GetExceptRangeForPc(pc, result, codePtr); + if (rangePtr == NULL) { + TRACE_APPEND(("no encl. loop or catch, returning %s\n", + StringForResultCode(result))); + goto abnormalReturn; + } + if (rangePtr->type == CATCH_EXCEPTION_RANGE) { + TRACE_APPEND(("%s ...\n", StringForResultCode(result))); + goto processCatch; + } + while (cleanup--) { + valuePtr = POP_OBJECT(); + TclDecrRefCount(valuePtr); + } + if (result == TCL_BREAK) { + result = TCL_OK; + pc = (codePtr->codeStart + rangePtr->breakOffset); + TRACE_APPEND(("%s, range at %d, new pc %d\n", + StringForResultCode(result), + rangePtr->codeOffset, rangePtr->breakOffset)); + NEXT_INST_F(0, 0, 0); + } + if (rangePtr->continueOffset == -1) { + TRACE_APPEND(("%s, loop w/o continue, checking for catch\n", + StringForResultCode(result))); + goto checkForCatch; + } + result = TCL_OK; + pc = (codePtr->codeStart + rangePtr->continueOffset); + TRACE_APPEND(("%s, range at %d, new pc %d\n", + StringForResultCode(result), + rangePtr->codeOffset, rangePtr->continueOffset)); + NEXT_INST_F(0, 0, 0); + } +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + objPtr = Tcl_GetObjResult(interp); + if ((result != TCL_ERROR) && (result != TCL_RETURN)) { + TRACE_APPEND(("OTHER RETURN CODE %d, result=\"%.30s\"\n ", + result, O2S(objPtr))); + } else { + TRACE_APPEND(("%s, result=\"%.30s\"\n", + StringForResultCode(result), O2S(objPtr))); + } + } +#endif + goto checkForCatch; + + /* + * Division by zero in an expression. Control only reaches this point + * by "goto divideByZero". + */ + + divideByZero: + Tcl_SetObjResult(interp, Tcl_NewStringObj("divide by zero", -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "ARITH", "DIVZERO", "divide by zero", NULL); + CACHE_STACK_INFO(); + goto gotError; + + /* + * Exponentiation of zero by negative number in an expression. Control + * only reaches this point by "goto exponOfZero". + */ + + exponOfZero: + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "exponentiation of zero by negative power", -1)); + DECACHE_STACK_INFO(); + Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", + "exponentiation of zero by negative power", NULL); + CACHE_STACK_INFO(); + + /* + * Almost all error paths feed through here rather than assigning to + * result themselves (for a small but consistent saving). + */ + + gotError: + result = TCL_ERROR; + + /* + * Execution has generated an "exception" such as TCL_ERROR. If the + * exception is an error, record information about what was being + * executed when the error occurred. Find the closest enclosing catch + * range, if any. If no enclosing catch range is found, stop execution + * and return the "exception" code. + */ + + checkForCatch: + if (iPtr->execEnvPtr->rewind) { + goto abnormalReturn; + } + if ((result == TCL_ERROR) && !(iPtr->flags & ERR_ALREADY_LOGGED)) { + const unsigned char *pcBeg; + + bytes = GetSrcInfoForPc(pc, codePtr, &length, &pcBeg, NULL); + DECACHE_STACK_INFO(); + TclLogCommandInfo(interp, codePtr->source, bytes, + bytes ? length : 0, pcBeg, tosPtr); + CACHE_STACK_INFO(); + } + iPtr->flags &= ~ERR_ALREADY_LOGGED; + + /* + * Clear all expansions that may have started after the last + * INST_BEGIN_CATCH. + */ + + while (auxObjList) { + if ((catchTop != initCatchTop) + && (*catchTop > (ptrdiff_t) + auxObjList->internalRep.twoPtrValue.ptr2)) { + break; + } + POP_TAUX_OBJ(); + } + + /* + * We must not catch if the script in progress has been canceled with + * the TCL_CANCEL_UNWIND flag. Instead, it blows outwards until we + * either hit another interpreter (presumably where the script in + * progress has not been canceled) or we get to the top-level. We do + * NOT modify the interpreter result here because we know it will + * already be set prior to vectoring down to this point in the code. + */ + + if (TclCanceled(iPtr) && (Tcl_Canceled(interp, 0) == TCL_ERROR)) { +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + fprintf(stdout, " ... cancel with unwind, returning %s\n", + StringForResultCode(result)); + } +#endif + goto abnormalReturn; + } + + /* + * We must not catch an exceeded limit. Instead, it blows outwards + * until we either hit another interpreter (presumably where the limit + * is not exceeded) or we get to the top-level. + */ + + if (TclLimitExceeded(iPtr->limit)) { +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + fprintf(stdout, " ... limit exceeded, returning %s\n", + StringForResultCode(result)); + } +#endif + goto abnormalReturn; + } + if (catchTop == initCatchTop) { +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + fprintf(stdout, " ... no enclosing catch, returning %s\n", + StringForResultCode(result)); + } +#endif + goto abnormalReturn; + } + rangePtr = GetExceptRangeForPc(pc, TCL_ERROR, codePtr); + if (rangePtr == NULL) { + /* + * This is only possible when compiling a [catch] that sends its + * script to INST_EVAL. Cannot correct the compiler without + * breaking compat with previous .tbc compiled scripts. + */ + +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + fprintf(stdout, " ... no enclosing catch, returning %s\n", + StringForResultCode(result)); + } +#endif + goto abnormalReturn; + } + + /* + * A catch exception range (rangePtr) was found to handle an + * "exception". It was found either by checkForCatch just above or by + * an instruction during break, continue, or error processing. Jump to + * its catchOffset after unwinding the operand stack to the depth it + * had when starting to execute the range's catch command. + */ + + processCatch: + while (CURR_DEPTH > *catchTop) { + valuePtr = POP_OBJECT(); + TclDecrRefCount(valuePtr); + } +#ifdef TCL_COMPILE_DEBUG + if (traceInstructions) { + fprintf(stdout, " ... found catch at %d, catchTop=%d, " + "unwound to %ld, new pc %u\n", + rangePtr->codeOffset, (int) (catchTop - initCatchTop - 1), + (long) *catchTop, (unsigned) rangePtr->catchOffset); + } +#endif + pc = (codePtr->codeStart + rangePtr->catchOffset); + NEXT_INST_F(0, 0, 0); /* Restart the execution loop at pc. */ + + /* + * end of infinite loop dispatching on instructions. + */ + + /* + * Abnormal return code. Restore the stack to state it had when + * starting to execute the ByteCode. Panic if the stack is below the + * initial level. + */ + + abnormalReturn: + TCL_DTRACE_INST_LAST(); + + /* + * Clear all expansions and same-level NR calls. + * + * Note that expansion markers have a NULL type; avoid removing other + * markers. + */ + + while (auxObjList) { + POP_TAUX_OBJ(); + } + while (tosPtr > initTosPtr) { + objPtr = POP_OBJECT(); + Tcl_DecrRefCount(objPtr); + } + + if (tosPtr < initTosPtr) { + fprintf(stderr, + "\nTclNRExecuteByteCode: abnormal return at pc %u: " + "stack top %d < entry stack top %d\n", + (unsigned)(pc - codePtr->codeStart), + (unsigned) CURR_DEPTH, (unsigned) 0); + Tcl_Panic("TclNRExecuteByteCode execution failure: end stack top < start stack top"); + } + CLANG_ASSERT(bcFramePtr); + } + + iPtr->cmdFramePtr = bcFramePtr->nextPtr; + TclReleaseByteCode(codePtr); + TclStackFree(interp, TD); /* free my stack */ + + return result; + + /* + * INST_START_CMD failure case removed where it doesn't bother that much + * + * Remark that if the interpreter is marked for deletion its + * compileEpoch is modified, so that the epoch check also verifies + * that the interp is not deleted. If no outside call has been made + * since the last check, it is safe to omit the check. + + * case INST_START_CMD: + */ + + instStartCmdFailed: + { + const char *bytes; + + checkInterp = 1; + length = 0; + + /* + * We used to switch to direct eval; for NRE-awareness we now + * compile and eval the command so that this evaluation does not + * add a new TEBC instance. [Bug 2910748] + */ + + if (TclInterpReady(interp) == TCL_ERROR) { + goto gotError; + } + + codePtr->flags |= TCL_BYTECODE_RECOMPILE; + bytes = GetSrcInfoForPc(pc, codePtr, &length, NULL, NULL); + opnd = TclGetUInt4AtPtr(pc+1); + pc += (opnd-1); + assert(bytes); + PUSH_OBJECT(Tcl_NewStringObj(bytes, length)); + goto instEvalStk; + } +} + +#undef codePtr +#undef iPtr +#undef bcFramePtr +#undef initCatchTop +#undef initTosPtr +#undef auxObjList +#undef catchTop +#undef TCONST +#undef esPtr + +static int +FinalizeOONext( + ClientData data[], + Tcl_Interp *interp, + int result) +{ + Interp *iPtr = (Interp *) interp; + CallContext *contextPtr = data[1]; + + /* + * Reset the variable lookup frame. + */ + + iPtr->varFramePtr = data[0]; + + /* + * Restore the call chain context index as we've finished the inner invoke + * and want to operate in the outer context again. + */ + + contextPtr->index = PTR2INT(data[2]); + contextPtr->skip = PTR2INT(data[3]); + contextPtr->oPtr->flags &= ~FILTER_HANDLING; + return result; +} + +static int +FinalizeOONextFilter( + ClientData data[], + Tcl_Interp *interp, + int result) +{ + Interp *iPtr = (Interp *) interp; + CallContext *contextPtr = data[1]; + + /* + * Reset the variable lookup frame. + */ + + iPtr->varFramePtr = data[0]; + + /* + * Restore the call chain context index as we've finished the inner invoke + * and want to operate in the outer context again. + */ + + contextPtr->index = PTR2INT(data[2]); + contextPtr->skip = PTR2INT(data[3]); + contextPtr->oPtr->flags |= FILTER_HANDLING; + return result; +} + +/* + *---------------------------------------------------------------------- + * + * ExecuteExtendedBinaryMathOp, ExecuteExtendedUnaryMathOp -- + * + * These functions do advanced math for binary and unary operators + * respectively, so that the main TEBC code does not bear the cost of + * them. + * + * Results: + * A Tcl_Obj* result, or a NULL (in which case valuePtr is updated to + * hold the result value), or one of the special flag values + * GENERAL_ARITHMETIC_ERROR, EXPONENT_OF_ZERO or DIVIDED_BY_ZERO. The + * latter two signify a zero value raised to a negative power or a value + * divided by zero, respectively. With GENERAL_ARITHMETIC_ERROR, all + * error information will have already been reported in the interpreter + * result. + * + * Side effects: + * May update the Tcl_Obj indicated valuePtr if it is unshared. Will + * return a NULL when that happens. + * + *---------------------------------------------------------------------- + */ + +static Tcl_Obj * +ExecuteExtendedBinaryMathOp( + Tcl_Interp *interp, /* Where to report errors. */ + int opcode, /* What operation to perform. */ + Tcl_Obj **constants, /* The execution environment's constants. */ + Tcl_Obj *valuePtr, /* The first operand on the stack. */ + Tcl_Obj *value2Ptr) /* The second operand on the stack. */ +{ +#define LONG_RESULT(l) \ + if (Tcl_IsShared(valuePtr)) { \ + TclNewLongObj(objResultPtr, l); \ + return objResultPtr; \ + } else { \ + Tcl_SetLongObj(valuePtr, l); \ + return NULL; \ + } +#define WIDE_RESULT(w) \ + if (Tcl_IsShared(valuePtr)) { \ + return Tcl_NewWideIntObj(w); \ + } else { \ + Tcl_SetWideIntObj(valuePtr, w); \ + return NULL; \ + } +#define BIG_RESULT(b) \ + if (Tcl_IsShared(valuePtr)) { \ + return Tcl_NewBignumObj(b); \ + } else { \ + Tcl_SetBignumObj(valuePtr, b); \ + return NULL; \ + } +#define DOUBLE_RESULT(d) \ + if (Tcl_IsShared(valuePtr)) { \ + TclNewDoubleObj(objResultPtr, (d)); \ + return objResultPtr; \ + } else { \ + Tcl_SetDoubleObj(valuePtr, (d)); \ + return NULL; \ + } + + int type1, type2; + ClientData ptr1, ptr2; + double d1, d2, dResult; + long l1, l2, lResult; + Tcl_WideInt w1, w2, wResult; + mp_int big1, big2, bigResult, bigRemainder; + Tcl_Obj *objResultPtr; + int invalid, numPos, zero; + long shift; + + (void) GetNumberFromObj(NULL, valuePtr, &ptr1, &type1); + (void) GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2); + + switch (opcode) { + case INST_MOD: + /* TODO: Attempts to re-use unshared operands on stack */ + + l2 = 0; /* silence gcc warning */ + if (type2 == TCL_NUMBER_LONG) { + l2 = *((const long *)ptr2); + if (l2 == 0) { + return DIVIDED_BY_ZERO; + } + if ((l2 == 1) || (l2 == -1)) { + /* + * Div. by |1| always yields remainder of 0. + */ + + return constants[0]; + } + } +#ifndef TCL_WIDE_INT_IS_LONG + if (type1 == TCL_NUMBER_WIDE) { + w1 = *((const Tcl_WideInt *)ptr1); + if (type2 != TCL_NUMBER_BIG) { + Tcl_WideInt wQuotient, wRemainder; + Tcl_GetWideIntFromObj(NULL, value2Ptr, &w2); + wQuotient = w1 / w2; + + /* + * Force Tcl's integer division rules. + * TODO: examine for logic simplification + */ + + if (((wQuotient < (Tcl_WideInt) 0) + || ((wQuotient == (Tcl_WideInt) 0) + && ((w1 < (Tcl_WideInt)0 && w2 > (Tcl_WideInt)0) + || (w1 > (Tcl_WideInt)0 && w2 < (Tcl_WideInt)0)))) + && (wQuotient * w2 != w1)) { + wQuotient -= (Tcl_WideInt) 1; + } + wRemainder = w1 - w2*wQuotient; + WIDE_RESULT(wRemainder); + } + + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + + /* TODO: internals intrusion */ + if ((w1 > ((Tcl_WideInt) 0)) ^ (big2.sign == MP_ZPOS)) { + /* + * Arguments are opposite sign; remainder is sum. + */ + + TclBNInitBignumFromWideInt(&big1, w1); + mp_add(&big2, &big1, &big2); + mp_clear(&big1); + BIG_RESULT(&big2); + } + + /* + * Arguments are same sign; remainder is first operand. + */ + + mp_clear(&big2); + return NULL; + } +#endif + Tcl_GetBignumFromObj(NULL, valuePtr, &big1); + Tcl_GetBignumFromObj(NULL, value2Ptr, &big2); + mp_init(&bigResult); + mp_init(&bigRemainder); + mp_div(&big1, &big2, &bigResult, &bigRemainder); + if (!mp_iszero(&bigRemainder) && (bigRemainder.sign != big2.sign)) { + /* + * Convert to Tcl's integer division rules. + */ + + mp_sub_d(&bigResult, 1, &bigResult); + mp_add(&bigRemainder, &big2, &bigRemainder); + } + mp_copy(&bigRemainder, &bigResult); + mp_clear(&bigRemainder); + mp_clear(&big1); + mp_clear(&big2); + BIG_RESULT(&bigResult); + + case INST_LSHIFT: + case INST_RSHIFT: { + /* + * Reject negative shift argument. + */ + + switch (type2) { + case TCL_NUMBER_LONG: + invalid = (*((const long *)ptr2) < 0L); + break; +#ifndef TCL_WIDE_INT_IS_LONG + case TCL_NUMBER_WIDE: + invalid = (*((const Tcl_WideInt *)ptr2) < (Tcl_WideInt)0); + break; +#endif + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + invalid = (mp_cmp_d(&big2, 0) == MP_LT); + mp_clear(&big2); + break; + default: + /* Unused, here to silence compiler warning */ + invalid = 0; + } + if (invalid) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "negative shift argument", -1)); + return GENERAL_ARITHMETIC_ERROR; + } + + /* + * Zero shifted any number of bits is still zero. + */ + + if ((type1==TCL_NUMBER_LONG) && (*((const long *)ptr1) == (long)0)) { + return constants[0]; + } + + if (opcode == INST_LSHIFT) { + /* + * Large left shifts create integer overflow. + * + * BEWARE! Can't use Tcl_GetIntFromObj() here because that + * converts values in the (unsigned) range to their signed int + * counterparts, leading to incorrect results. + */ + + if ((type2 != TCL_NUMBER_LONG) + || (*((const long *)ptr2) > (long) INT_MAX)) { + /* + * Technically, we could hold the value (1 << (INT_MAX+1)) in + * an mp_int, but since we're using mp_mul_2d() to do the + * work, and it takes only an int argument, that's a good + * place to draw the line. + */ + + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "integer value too large to represent", -1)); + return GENERAL_ARITHMETIC_ERROR; + } + shift = (int)(*((const long *)ptr2)); + + /* + * Handle shifts within the native wide range. + */ + + if ((type1 != TCL_NUMBER_BIG) + && ((size_t)shift < CHAR_BIT*sizeof(Tcl_WideInt))) { + TclGetWideIntFromObj(NULL, valuePtr, &w1); + if (!((w1>0 ? w1 : ~w1) + & -(((Tcl_WideInt)1) + << (CHAR_BIT*sizeof(Tcl_WideInt) - 1 - shift)))) { + WIDE_RESULT(w1 << shift); + } + } + } else { + /* + * Quickly force large right shifts to 0 or -1. + */ + + if ((type2 != TCL_NUMBER_LONG) + || (*(const long *)ptr2 > INT_MAX)) { + /* + * Again, technically, the value to be shifted could be an + * mp_int so huge that a right shift by (INT_MAX+1) bits could + * not take us to the result of 0 or -1, but since we're using + * mp_div_2d to do the work, and it takes only an int + * argument, we draw the line there. + */ + + switch (type1) { + case TCL_NUMBER_LONG: + zero = (*(const long *)ptr1 > 0L); + break; +#ifndef TCL_WIDE_INT_IS_LONG + case TCL_NUMBER_WIDE: + zero = (*(const Tcl_WideInt *)ptr1 > (Tcl_WideInt)0); + break; +#endif + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + zero = (mp_cmp_d(&big1, 0) == MP_GT); + mp_clear(&big1); + break; + default: + /* Unused, here to silence compiler warning. */ + zero = 0; + } + if (zero) { + return constants[0]; + } + LONG_RESULT(-1); + } + shift = (int)(*(const long *)ptr2); + +#ifndef TCL_WIDE_INT_IS_LONG + /* + * Handle shifts within the native wide range. + */ + + if (type1 == TCL_NUMBER_WIDE) { + w1 = *(const Tcl_WideInt *)ptr1; + if ((size_t)shift >= CHAR_BIT*sizeof(Tcl_WideInt)) { + if (w1 >= (Tcl_WideInt)0) { + return constants[0]; + } + LONG_RESULT(-1); + } + WIDE_RESULT(w1 >> shift); + } +#endif + } + + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + + mp_init(&bigResult); + if (opcode == INST_LSHIFT) { + mp_mul_2d(&big1, shift, &bigResult); + } else { + mp_init(&bigRemainder); + mp_div_2d(&big1, shift, &bigResult, &bigRemainder); + if (mp_cmp_d(&bigRemainder, 0) == MP_LT) { + /* + * Convert to Tcl's integer division rules. + */ + + mp_sub_d(&bigResult, 1, &bigResult); + } + mp_clear(&bigRemainder); + } + mp_clear(&big1); + BIG_RESULT(&bigResult); + } + + case INST_BITOR: + case INST_BITXOR: + case INST_BITAND: + if ((type1 == TCL_NUMBER_BIG) || (type2 == TCL_NUMBER_BIG)) { + mp_int *First, *Second; + + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + + /* + * Count how many positive arguments we have. If only one of the + * arguments is negative, store it in 'Second'. + */ + + if (mp_cmp_d(&big1, 0) != MP_LT) { + numPos = 1 + (mp_cmp_d(&big2, 0) != MP_LT); + First = &big1; + Second = &big2; + } else { + First = &big2; + Second = &big1; + numPos = (mp_cmp_d(First, 0) != MP_LT); + } + mp_init(&bigResult); + + switch (opcode) { + case INST_BITAND: + switch (numPos) { + case 2: + /* + * Both arguments positive, base case. + */ + + mp_and(First, Second, &bigResult); + break; + case 1: + /* + * First is positive; second negative: + * P & N = P & ~~N = P&~(-N-1) = P & (P ^ (-N-1)) + */ + + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_xor(First, Second, &bigResult); + mp_and(First, &bigResult, &bigResult); + break; + case 0: + /* + * Both arguments negative: + * a & b = ~ (~a | ~b) = -(-a-1|-b-1)-1 + */ + + mp_neg(First, First); + mp_sub_d(First, 1, First); + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_or(First, Second, &bigResult); + mp_neg(&bigResult, &bigResult); + mp_sub_d(&bigResult, 1, &bigResult); + break; + } + break; + + case INST_BITOR: + switch (numPos) { + case 2: + /* + * Both arguments positive, base case. + */ + + mp_or(First, Second, &bigResult); + break; + case 1: + /* + * First is positive; second negative: + * N|P = ~(~N&~P) = ~((-N-1)&~P) = -((-N-1)&((-N-1)^P))-1 + */ + + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_xor(First, Second, &bigResult); + mp_and(Second, &bigResult, &bigResult); + mp_neg(&bigResult, &bigResult); + mp_sub_d(&bigResult, 1, &bigResult); + break; + case 0: + /* + * Both arguments negative: + * a | b = ~ (~a & ~b) = -(-a-1&-b-1)-1 + */ + + mp_neg(First, First); + mp_sub_d(First, 1, First); + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_and(First, Second, &bigResult); + mp_neg(&bigResult, &bigResult); + mp_sub_d(&bigResult, 1, &bigResult); + break; + } + break; + + case INST_BITXOR: + switch (numPos) { + case 2: + /* + * Both arguments positive, base case. + */ + + mp_xor(First, Second, &bigResult); + break; + case 1: + /* + * First is positive; second negative: + * P^N = ~(P^~N) = -(P^(-N-1))-1 + */ + + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_xor(First, Second, &bigResult); + mp_neg(&bigResult, &bigResult); + mp_sub_d(&bigResult, 1, &bigResult); + break; + case 0: + /* + * Both arguments negative: + * a ^ b = (~a ^ ~b) = (-a-1^-b-1) + */ + + mp_neg(First, First); + mp_sub_d(First, 1, First); + mp_neg(Second, Second); + mp_sub_d(Second, 1, Second); + mp_xor(First, Second, &bigResult); + break; + } + break; + } + + mp_clear(&big1); + mp_clear(&big2); + BIG_RESULT(&bigResult); + } + +#ifndef TCL_WIDE_INT_IS_LONG + if ((type1 == TCL_NUMBER_WIDE) || (type2 == TCL_NUMBER_WIDE)) { + TclGetWideIntFromObj(NULL, valuePtr, &w1); + TclGetWideIntFromObj(NULL, value2Ptr, &w2); + + switch (opcode) { + case INST_BITAND: + wResult = w1 & w2; + break; + case INST_BITOR: + wResult = w1 | w2; + break; + case INST_BITXOR: + wResult = w1 ^ w2; + break; + default: + /* Unused, here to silence compiler warning. */ + wResult = 0; + } + WIDE_RESULT(wResult); + } +#endif + l1 = *((const long *)ptr1); + l2 = *((const long *)ptr2); + + switch (opcode) { + case INST_BITAND: + lResult = l1 & l2; + break; + case INST_BITOR: + lResult = l1 | l2; + break; + case INST_BITXOR: + lResult = l1 ^ l2; + break; + default: + /* Unused, here to silence compiler warning. */ + lResult = 0; + } + LONG_RESULT(lResult); + + case INST_EXPON: { + int oddExponent = 0, negativeExponent = 0; + unsigned short base; + + if ((type1 == TCL_NUMBER_DOUBLE) || (type2 == TCL_NUMBER_DOUBLE)) { + Tcl_GetDoubleFromObj(NULL, valuePtr, &d1); + Tcl_GetDoubleFromObj(NULL, value2Ptr, &d2); + + if (d1==0.0 && d2<0.0) { + return EXPONENT_OF_ZERO; + } + dResult = pow(d1, d2); + goto doubleResult; + } + l1 = l2 = 0; + if (type2 == TCL_NUMBER_LONG) { + l2 = *((const long *) ptr2); + if (l2 == 0) { + /* + * Anything to the zero power is 1. + */ + + return constants[1]; + } else if (l2 == 1) { + /* + * Anything to the first power is itself + */ + + return NULL; + } + } + + switch (type2) { + case TCL_NUMBER_LONG: + negativeExponent = (l2 < 0); + oddExponent = (int) (l2 & 1); + break; +#ifndef TCL_WIDE_INT_IS_LONG + case TCL_NUMBER_WIDE: + w2 = *((const Tcl_WideInt *)ptr2); + negativeExponent = (w2 < 0); + oddExponent = (int) (w2 & (Tcl_WideInt)1); + break; +#endif + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + negativeExponent = (mp_cmp_d(&big2, 0) == MP_LT); + mp_mod_2d(&big2, 1, &big2); + oddExponent = !mp_iszero(&big2); + mp_clear(&big2); + break; + } + + if (type1 == TCL_NUMBER_LONG) { + l1 = *((const long *)ptr1); + } + if (negativeExponent) { + if (type1 == TCL_NUMBER_LONG) { + switch (l1) { + case 0: + /* + * Zero to a negative power is div by zero error. + */ + + return EXPONENT_OF_ZERO; + case -1: + if (oddExponent) { + LONG_RESULT(-1); + } + /* fallthrough */ + case 1: + /* + * 1 to any power is 1. + */ + + return constants[1]; + } + } + + /* + * Integers with magnitude greater than 1 raise to a negative + * power yield the answer zero (see TIP 123). + */ + + return constants[0]; + } + + if (type1 == TCL_NUMBER_LONG) { + switch (l1) { + case 0: + /* + * Zero to a positive power is zero. + */ + + return constants[0]; + case 1: + /* + * 1 to any power is 1. + */ + + return constants[1]; + case -1: + if (!oddExponent) { + return constants[1]; + } + LONG_RESULT(-1); + } + } + + /* + * We refuse to accept exponent arguments that exceed one mp_digit + * which means the max exponent value is 2**28-1 = 0x0fffffff = + * 268435455, which fits into a signed 32 bit int which is within the + * range of the long int type. This means any numeric Tcl_Obj value + * not using TCL_NUMBER_LONG type must hold a value larger than we + * accept. + */ + + if (type2 != TCL_NUMBER_LONG) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "exponent too large", -1)); + return GENERAL_ARITHMETIC_ERROR; + } + + if (type1 == TCL_NUMBER_LONG) { + if (l1 == 2) { + /* + * Reduce small powers of 2 to shifts. + */ + + if ((unsigned long) l2 < CHAR_BIT * sizeof(long) - 1) { + LONG_RESULT(1L << l2); + } +#if !defined(TCL_WIDE_INT_IS_LONG) + if ((unsigned long)l2 < CHAR_BIT*sizeof(Tcl_WideInt) - 1) { + WIDE_RESULT(((Tcl_WideInt) 1) << l2); + } +#endif + goto overflowExpon; + } + if (l1 == -2) { + int signum = oddExponent ? -1 : 1; + + /* + * Reduce small powers of 2 to shifts. + */ + + if ((unsigned long) l2 < CHAR_BIT * sizeof(long) - 1) { + LONG_RESULT(signum * (1L << l2)); + } +#if !defined(TCL_WIDE_INT_IS_LONG) + if ((unsigned long)l2 < CHAR_BIT*sizeof(Tcl_WideInt) - 1){ + WIDE_RESULT(signum * (((Tcl_WideInt) 1) << l2)); + } +#endif + goto overflowExpon; + } +#if (LONG_MAX == 0x7fffffff) + if (l2 - 2 < (long)MaxBase32Size + && l1 <= MaxBase32[l2 - 2] + && l1 >= -MaxBase32[l2 - 2]) { + /* + * Small powers of 32-bit integers. + */ + + lResult = l1 * l1; /* b**2 */ + switch (l2) { + case 2: + break; + case 3: + lResult *= l1; /* b**3 */ + break; + case 4: + lResult *= lResult; /* b**4 */ + break; + case 5: + lResult *= lResult; /* b**4 */ + lResult *= l1; /* b**5 */ + break; + case 6: + lResult *= l1; /* b**3 */ + lResult *= lResult; /* b**6 */ + break; + case 7: + lResult *= l1; /* b**3 */ + lResult *= lResult; /* b**6 */ + lResult *= l1; /* b**7 */ + break; + case 8: + lResult *= lResult; /* b**4 */ + lResult *= lResult; /* b**8 */ + break; + } + LONG_RESULT(lResult); + } + + if (l1 - 3 >= 0 && l1 -2 < (long)Exp32IndexSize + && l2 - 2 < (long)(Exp32ValueSize + MaxBase32Size)) { + base = Exp32Index[l1 - 3] + + (unsigned short) (l2 - 2 - MaxBase32Size); + if (base < Exp32Index[l1 - 2]) { + /* + * 32-bit number raised to intermediate power, done by + * table lookup. + */ + + LONG_RESULT(Exp32Value[base]); + } + } + if (-l1 - 3 >= 0 && -l1 - 2 < (long)Exp32IndexSize + && l2 - 2 < (long)(Exp32ValueSize + MaxBase32Size)) { + base = Exp32Index[-l1 - 3] + + (unsigned short) (l2 - 2 - MaxBase32Size); + if (base < Exp32Index[-l1 - 2]) { + /* + * 32-bit number raised to intermediate power, done by + * table lookup. + */ + + lResult = (oddExponent) ? + -Exp32Value[base] : Exp32Value[base]; + LONG_RESULT(lResult); + } + } +#endif + } +#if (LONG_MAX > 0x7fffffff) || !defined(TCL_WIDE_INT_IS_LONG) + if (type1 == TCL_NUMBER_LONG) { + w1 = l1; +#ifndef TCL_WIDE_INT_IS_LONG + } else if (type1 == TCL_NUMBER_WIDE) { + w1 = *((const Tcl_WideInt *) ptr1); +#endif + } else { + goto overflowExpon; + } + if (l2 - 2 < (long)MaxBase64Size + && w1 <= MaxBase64[l2 - 2] + && w1 >= -MaxBase64[l2 - 2]) { + /* + * Small powers of integers whose result is wide. + */ + + wResult = w1 * w1; /* b**2 */ + switch (l2) { + case 2: + break; + case 3: + wResult *= l1; /* b**3 */ + break; + case 4: + wResult *= wResult; /* b**4 */ + break; + case 5: + wResult *= wResult; /* b**4 */ + wResult *= w1; /* b**5 */ + break; + case 6: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + break; + case 7: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= w1; /* b**7 */ + break; + case 8: + wResult *= wResult; /* b**4 */ + wResult *= wResult; /* b**8 */ + break; + case 9: + wResult *= wResult; /* b**4 */ + wResult *= wResult; /* b**8 */ + wResult *= w1; /* b**9 */ + break; + case 10: + wResult *= wResult; /* b**4 */ + wResult *= w1; /* b**5 */ + wResult *= wResult; /* b**10 */ + break; + case 11: + wResult *= wResult; /* b**4 */ + wResult *= w1; /* b**5 */ + wResult *= wResult; /* b**10 */ + wResult *= w1; /* b**11 */ + break; + case 12: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= wResult; /* b**12 */ + break; + case 13: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= wResult; /* b**12 */ + wResult *= w1; /* b**13 */ + break; + case 14: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= w1; /* b**7 */ + wResult *= wResult; /* b**14 */ + break; + case 15: + wResult *= w1; /* b**3 */ + wResult *= wResult; /* b**6 */ + wResult *= w1; /* b**7 */ + wResult *= wResult; /* b**14 */ + wResult *= w1; /* b**15 */ + break; + case 16: + wResult *= wResult; /* b**4 */ + wResult *= wResult; /* b**8 */ + wResult *= wResult; /* b**16 */ + break; + } + WIDE_RESULT(wResult); + } + + /* + * Handle cases of powers > 16 that still fit in a 64-bit word by + * doing table lookup. + */ + + if (w1 - 3 >= 0 && w1 - 2 < (long)Exp64IndexSize + && l2 - 2 < (long)(Exp64ValueSize + MaxBase64Size)) { + base = Exp64Index[w1 - 3] + + (unsigned short) (l2 - 2 - MaxBase64Size); + if (base < Exp64Index[w1 - 2]) { + /* + * 64-bit number raised to intermediate power, done by + * table lookup. + */ + + WIDE_RESULT(Exp64Value[base]); + } + } + + if (-w1 - 3 >= 0 && -w1 - 2 < (long)Exp64IndexSize + && l2 - 2 < (long)(Exp64ValueSize + MaxBase64Size)) { + base = Exp64Index[-w1 - 3] + + (unsigned short) (l2 - 2 - MaxBase64Size); + if (base < Exp64Index[-w1 - 2]) { + /* + * 64-bit number raised to intermediate power, done by + * table lookup. + */ + + wResult = oddExponent ? -Exp64Value[base] : Exp64Value[base]; + WIDE_RESULT(wResult); + } + } +#endif + + overflowExpon: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + if (big2.used > 1) { + mp_clear(&big2); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "exponent too large", -1)); + return GENERAL_ARITHMETIC_ERROR; + } + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + mp_init(&bigResult); + mp_expt_d(&big1, big2.dp[0], &bigResult); + mp_clear(&big1); + mp_clear(&big2); + BIG_RESULT(&bigResult); + } + + case INST_ADD: + case INST_SUB: + case INST_MULT: + case INST_DIV: + if ((type1 == TCL_NUMBER_DOUBLE) || (type2 == TCL_NUMBER_DOUBLE)) { + /* + * At least one of the values is floating-point, so perform + * floating point calculations. + */ + + Tcl_GetDoubleFromObj(NULL, valuePtr, &d1); + Tcl_GetDoubleFromObj(NULL, value2Ptr, &d2); + + switch (opcode) { + case INST_ADD: + dResult = d1 + d2; + break; + case INST_SUB: + dResult = d1 - d2; + break; + case INST_MULT: + dResult = d1 * d2; + break; + case INST_DIV: +#ifndef IEEE_FLOATING_POINT + if (d2 == 0.0) { + return DIVIDED_BY_ZERO; + } +#endif + /* + * We presume that we are running with zero-divide unmasked if + * we're on an IEEE box. Otherwise, this statement might cause + * demons to fly out our noses. + */ + + dResult = d1 / d2; + break; + default: + /* Unused, here to silence compiler warning. */ + dResult = 0; + } + + doubleResult: +#ifndef ACCEPT_NAN + /* + * Check now for IEEE floating-point error. + */ + + if (TclIsNaN(dResult)) { + TclExprFloatError(interp, dResult); + return GENERAL_ARITHMETIC_ERROR; + } +#endif + DOUBLE_RESULT(dResult); + } + if ((type1 != TCL_NUMBER_BIG) && (type2 != TCL_NUMBER_BIG)) { + TclGetWideIntFromObj(NULL, valuePtr, &w1); + TclGetWideIntFromObj(NULL, value2Ptr, &w2); + + switch (opcode) { + case INST_ADD: + wResult = w1 + w2; +#ifndef TCL_WIDE_INT_IS_LONG + if ((type1 == TCL_NUMBER_WIDE) || (type2 == TCL_NUMBER_WIDE)) +#endif + { + /* + * Check for overflow. + */ + + if (Overflowing(w1, w2, wResult)) { + goto overflowBasic; + } + } + break; + + case INST_SUB: + wResult = w1 - w2; +#ifndef TCL_WIDE_INT_IS_LONG + if ((type1 == TCL_NUMBER_WIDE) || (type2 == TCL_NUMBER_WIDE)) +#endif + { + /* + * Must check for overflow. The macro tests for overflows + * in sums by looking at the sign bits. As we have a + * subtraction here, we are adding -w2. As -w2 could in + * turn overflow, we test with ~w2 instead: it has the + * opposite sign bit to w2 so it does the job. Note that + * the only "bad" case (w2==0) is irrelevant for this + * macro, as in that case w1 and wResult have the same + * sign and there is no overflow anyway. + */ + + if (Overflowing(w1, ~w2, wResult)) { + goto overflowBasic; + } + } + break; + + case INST_MULT: + if ((type1 != TCL_NUMBER_LONG) || (type2 != TCL_NUMBER_LONG) + || (sizeof(Tcl_WideInt) < 2*sizeof(long))) { + goto overflowBasic; + } + wResult = w1 * w2; + break; + + case INST_DIV: + if (w2 == 0) { + return DIVIDED_BY_ZERO; + } + + /* + * Need a bignum to represent (LLONG_MIN / -1) + */ + + if ((w1 == LLONG_MIN) && (w2 == -1)) { + goto overflowBasic; + } + wResult = w1 / w2; + + /* + * Force Tcl's integer division rules. + * TODO: examine for logic simplification + */ + + if (((wResult < 0) || ((wResult == 0) && + ((w1 < 0 && w2 > 0) || (w1 > 0 && w2 < 0)))) && + (wResult*w2 != w1)) { + wResult -= 1; + } + break; + + default: + /* + * Unused, here to silence compiler warning. + */ + + wResult = 0; + } + + WIDE_RESULT(wResult); + } + + overflowBasic: + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + mp_init(&bigResult); + switch (opcode) { + case INST_ADD: + mp_add(&big1, &big2, &bigResult); + break; + case INST_SUB: + mp_sub(&big1, &big2, &bigResult); + break; + case INST_MULT: + mp_mul(&big1, &big2, &bigResult); + break; + case INST_DIV: + if (mp_iszero(&big2)) { + mp_clear(&big1); + mp_clear(&big2); + mp_clear(&bigResult); + return DIVIDED_BY_ZERO; + } + mp_init(&bigRemainder); + mp_div(&big1, &big2, &bigResult, &bigRemainder); + /* TODO: internals intrusion */ + if (!mp_iszero(&bigRemainder) + && (bigRemainder.sign != big2.sign)) { + /* + * Convert to Tcl's integer division rules. + */ + + mp_sub_d(&bigResult, 1, &bigResult); + mp_add(&bigRemainder, &big2, &bigRemainder); + } + mp_clear(&bigRemainder); + break; + } + mp_clear(&big1); + mp_clear(&big2); + BIG_RESULT(&bigResult); + } + + Tcl_Panic("unexpected opcode"); + return NULL; +} + +static Tcl_Obj * +ExecuteExtendedUnaryMathOp( + int opcode, /* What operation to perform. */ + Tcl_Obj *valuePtr) /* The operand on the stack. */ +{ + ClientData ptr; + int type; + Tcl_WideInt w; + mp_int big; + Tcl_Obj *objResultPtr; + + (void) GetNumberFromObj(NULL, valuePtr, &ptr, &type); + + switch (opcode) { + case INST_BITNOT: +#ifndef TCL_WIDE_INT_IS_LONG + if (type == TCL_NUMBER_WIDE) { + w = *((const Tcl_WideInt *) ptr); + WIDE_RESULT(~w); + } +#endif + Tcl_TakeBignumFromObj(NULL, valuePtr, &big); + /* ~a = - a - 1 */ + mp_neg(&big, &big); + mp_sub_d(&big, 1, &big); + BIG_RESULT(&big); + case INST_UMINUS: + switch (type) { + case TCL_NUMBER_DOUBLE: + DOUBLE_RESULT(-(*((const double *) ptr))); + case TCL_NUMBER_LONG: + w = (Tcl_WideInt) (*((const long *) ptr)); + if (w != LLONG_MIN) { + WIDE_RESULT(-w); + } + TclBNInitBignumFromLong(&big, *(const long *) ptr); + break; +#ifndef TCL_WIDE_INT_IS_LONG + case TCL_NUMBER_WIDE: + w = *((const Tcl_WideInt *) ptr); + if (w != LLONG_MIN) { + WIDE_RESULT(-w); + } + TclBNInitBignumFromWideInt(&big, w); + break; +#endif + default: + Tcl_TakeBignumFromObj(NULL, valuePtr, &big); + } + mp_neg(&big, &big); + BIG_RESULT(&big); + } + + Tcl_Panic("unexpected opcode"); + return NULL; +} +#undef LONG_RESULT +#undef WIDE_RESULT +#undef BIG_RESULT +#undef DOUBLE_RESULT + +/* + *---------------------------------------------------------------------- + * + * CompareTwoNumbers -- + * + * This function compares a pair of numbers in Tcl_Objs. Each argument + * must already be known to be numeric and not NaN. + * + * Results: + * One of MP_LT, MP_EQ or MP_GT, depending on whether valuePtr is less + * than, equal to, or greater than value2Ptr (respectively). + * + * Side effects: + * None, provided both values are numeric. + * + *---------------------------------------------------------------------- + */ + +int +TclCompareTwoNumbers( + Tcl_Obj *valuePtr, + Tcl_Obj *value2Ptr) +{ + int type1, type2, compare; + ClientData ptr1, ptr2; + mp_int big1, big2; + double d1, d2, tmp; + long l1, l2; +#ifndef TCL_WIDE_INT_IS_LONG + Tcl_WideInt w1, w2; +#endif + + (void) GetNumberFromObj(NULL, valuePtr, &ptr1, &type1); + (void) GetNumberFromObj(NULL, value2Ptr, &ptr2, &type2); + + switch (type1) { + case TCL_NUMBER_LONG: + l1 = *((const long *)ptr1); + switch (type2) { + case TCL_NUMBER_LONG: + l2 = *((const long *)ptr2); + longCompare: + return (l1 < l2) ? MP_LT : ((l1 > l2) ? MP_GT : MP_EQ); +#ifndef TCL_WIDE_INT_IS_LONG + case TCL_NUMBER_WIDE: + w2 = *((const Tcl_WideInt *)ptr2); + w1 = (Tcl_WideInt)l1; + goto wideCompare; +#endif + case TCL_NUMBER_DOUBLE: + d2 = *((const double *)ptr2); + d1 = (double) l1; + + /* + * If the double has a fractional part, or if the long can be + * converted to double without loss of precision, then compare as + * doubles. + */ + + if (DBL_MANT_DIG > CHAR_BIT*sizeof(long) || l1 == (long) d1 + || modf(d2, &tmp) != 0.0) { + goto doubleCompare; + } + + /* + * Otherwise, to make comparision based on full precision, need to + * convert the double to a suitably sized integer. + * + * Need this to get comparsions like + * expr 20000000000000003 < 20000000000000004.0 + * right. Converting the first argument to double will yield two + * double values that are equivalent within double precision. + * Converting the double to an integer gets done exactly, then + * integer comparison can tell the difference. + */ + + if (d2 < (double)LONG_MIN) { + return MP_GT; + } + if (d2 > (double)LONG_MAX) { + return MP_LT; + } + l2 = (long) d2; + goto longCompare; + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + if (mp_cmp_d(&big2, 0) == MP_LT) { + compare = MP_GT; + } else { + compare = MP_LT; + } + mp_clear(&big2); + return compare; + } + +#ifndef TCL_WIDE_INT_IS_LONG + case TCL_NUMBER_WIDE: + w1 = *((const Tcl_WideInt *)ptr1); + switch (type2) { + case TCL_NUMBER_WIDE: + w2 = *((const Tcl_WideInt *)ptr2); + wideCompare: + return (w1 < w2) ? MP_LT : ((w1 > w2) ? MP_GT : MP_EQ); + case TCL_NUMBER_LONG: + l2 = *((const long *)ptr2); + w2 = (Tcl_WideInt)l2; + goto wideCompare; + case TCL_NUMBER_DOUBLE: + d2 = *((const double *)ptr2); + d1 = (double) w1; + if (DBL_MANT_DIG > CHAR_BIT*sizeof(Tcl_WideInt) + || w1 == (Tcl_WideInt) d1 || modf(d2, &tmp) != 0.0) { + goto doubleCompare; + } + if (d2 < (double)LLONG_MIN) { + return MP_GT; + } + if (d2 > (double)LLONG_MAX) { + return MP_LT; + } + w2 = (Tcl_WideInt) d2; + goto wideCompare; + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + if (mp_cmp_d(&big2, 0) == MP_LT) { + compare = MP_GT; + } else { + compare = MP_LT; + } + mp_clear(&big2); + return compare; + } +#endif + + case TCL_NUMBER_DOUBLE: + d1 = *((const double *)ptr1); + switch (type2) { + case TCL_NUMBER_DOUBLE: + d2 = *((const double *)ptr2); + doubleCompare: + return (d1 < d2) ? MP_LT : ((d1 > d2) ? MP_GT : MP_EQ); + case TCL_NUMBER_LONG: + l2 = *((const long *)ptr2); + d2 = (double) l2; + if (DBL_MANT_DIG > CHAR_BIT*sizeof(long) || l2 == (long) d2 + || modf(d1, &tmp) != 0.0) { + goto doubleCompare; + } + if (d1 < (double)LONG_MIN) { + return MP_LT; + } + if (d1 > (double)LONG_MAX) { + return MP_GT; + } + l1 = (long) d1; + goto longCompare; +#ifndef TCL_WIDE_INT_IS_LONG + case TCL_NUMBER_WIDE: + w2 = *((const Tcl_WideInt *)ptr2); + d2 = (double) w2; + if (DBL_MANT_DIG > CHAR_BIT*sizeof(Tcl_WideInt) + || w2 == (Tcl_WideInt) d2 || modf(d1, &tmp) != 0.0) { + goto doubleCompare; + } + if (d1 < (double)LLONG_MIN) { + return MP_LT; + } + if (d1 > (double)LLONG_MAX) { + return MP_GT; + } + w1 = (Tcl_WideInt) d1; + goto wideCompare; +#endif + case TCL_NUMBER_BIG: + if (TclIsInfinite(d1)) { + return (d1 > 0.0) ? MP_GT : MP_LT; + } + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + if ((d1 < (double)LONG_MAX) && (d1 > (double)LONG_MIN)) { + if (mp_cmp_d(&big2, 0) == MP_LT) { + compare = MP_GT; + } else { + compare = MP_LT; + } + mp_clear(&big2); + return compare; + } + if (DBL_MANT_DIG > CHAR_BIT*sizeof(long) + && modf(d1, &tmp) != 0.0) { + d2 = TclBignumToDouble(&big2); + mp_clear(&big2); + goto doubleCompare; + } + Tcl_InitBignumFromDouble(NULL, d1, &big1); + goto bigCompare; + } + + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, valuePtr, &big1); + switch (type2) { +#ifndef TCL_WIDE_INT_IS_LONG + case TCL_NUMBER_WIDE: +#endif + case TCL_NUMBER_LONG: + compare = mp_cmp_d(&big1, 0); + mp_clear(&big1); + return compare; + case TCL_NUMBER_DOUBLE: + d2 = *((const double *)ptr2); + if (TclIsInfinite(d2)) { + compare = (d2 > 0.0) ? MP_LT : MP_GT; + mp_clear(&big1); + return compare; + } + if ((d2 < (double)LONG_MAX) && (d2 > (double)LONG_MIN)) { + compare = mp_cmp_d(&big1, 0); + mp_clear(&big1); + return compare; + } + if (DBL_MANT_DIG > CHAR_BIT*sizeof(long) + && modf(d2, &tmp) != 0.0) { + d1 = TclBignumToDouble(&big1); + mp_clear(&big1); + goto doubleCompare; + } + Tcl_InitBignumFromDouble(NULL, d2, &big2); + goto bigCompare; + case TCL_NUMBER_BIG: + Tcl_TakeBignumFromObj(NULL, value2Ptr, &big2); + bigCompare: + compare = mp_cmp(&big1, &big2); + mp_clear(&big1); + mp_clear(&big2); + return compare; + } + default: + Tcl_Panic("unexpected number type"); + return TCL_ERROR; + } +} + +#ifdef TCL_COMPILE_DEBUG +/* + *---------------------------------------------------------------------- + * + * PrintByteCodeInfo -- + * + * This procedure prints a summary about a bytecode object to stdout. It + * is called by TclNRExecuteByteCode when starting to execute the bytecode + * object if tclTraceExec has the value 2 or more. + * + * Results: + * None. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +static void +PrintByteCodeInfo( + register ByteCode *codePtr) /* The bytecode whose summary is printed to + * stdout. */ +{ + Proc *procPtr = codePtr->procPtr; + Interp *iPtr = (Interp *) *codePtr->interpHandle; + + fprintf(stdout, "\nExecuting ByteCode 0x%p, refCt %u, epoch %u, interp 0x%p (epoch %u)\n", + codePtr, codePtr->refCount, codePtr->compileEpoch, iPtr, + iPtr->compileEpoch); + + fprintf(stdout, " Source: "); + TclPrintSource(stdout, codePtr->source, 60); + + fprintf(stdout, "\n Cmds %d, src %d, inst %u, litObjs %u, aux %d, stkDepth %u, code/src %.2f\n", + codePtr->numCommands, codePtr->numSrcBytes, + codePtr->numCodeBytes, codePtr->numLitObjects, + codePtr->numAuxDataItems, codePtr->maxStackDepth, +#ifdef TCL_COMPILE_STATS + codePtr->numSrcBytes? + ((float)codePtr->structureSize)/codePtr->numSrcBytes : +#endif + 0.0); + +#ifdef TCL_COMPILE_STATS + fprintf(stdout, " Code %lu = header %lu+inst %d+litObj %lu+exc %lu+aux %lu+cmdMap %d\n", + (unsigned long) codePtr->structureSize, + (unsigned long) (sizeof(ByteCode)-sizeof(size_t)-sizeof(Tcl_Time)), + codePtr->numCodeBytes, + (unsigned long) (codePtr->numLitObjects * sizeof(Tcl_Obj *)), + (unsigned long) (codePtr->numExceptRanges*sizeof(ExceptionRange)), + (unsigned long) (codePtr->numAuxDataItems * sizeof(AuxData)), + codePtr->numCmdLocBytes); +#endif /* TCL_COMPILE_STATS */ + if (procPtr != NULL) { + fprintf(stdout, + " Proc 0x%p, refCt %d, args %d, compiled locals %d\n", + procPtr, procPtr->refCount, procPtr->numArgs, + procPtr->numCompiledLocals); + } +} +#endif /* TCL_COMPILE_DEBUG */ + +/* + *---------------------------------------------------------------------- + * + * ValidatePcAndStackTop -- + * + * This procedure is called by TclNRExecuteByteCode when debugging to + * verify that the program counter and stack top are valid during + * execution. + * + * Results: + * None. + * + * Side effects: + * Prints a message to stderr and panics if either the pc or stack top + * are invalid. + * + *---------------------------------------------------------------------- + */ + +#ifdef TCL_COMPILE_DEBUG +static void +ValidatePcAndStackTop( + register ByteCode *codePtr, /* The bytecode whose summary is printed to + * stdout. */ + const unsigned char *pc, /* Points to first byte of a bytecode + * instruction. The program counter. */ + int stackTop, /* Current stack top. Must be between + * stackLowerBound and stackUpperBound + * (inclusive). */ + int checkStack) /* 0 if the stack depth check should be + * skipped. */ +{ + int stackUpperBound = codePtr->maxStackDepth; + /* Greatest legal value for stackTop. */ + unsigned relativePc = (unsigned) (pc - codePtr->codeStart); + unsigned long codeStart = (unsigned long) codePtr->codeStart; + unsigned long codeEnd = (unsigned long) + (codePtr->codeStart + codePtr->numCodeBytes); + unsigned char opCode = *pc; + + if (((unsigned long) pc < codeStart) || ((unsigned long) pc > codeEnd)) { + fprintf(stderr, "\nBad instruction pc 0x%p in TclNRExecuteByteCode\n", + pc); + Tcl_Panic("TclNRExecuteByteCode execution failure: bad pc"); + } + if ((unsigned) opCode > LAST_INST_OPCODE) { + fprintf(stderr, "\nBad opcode %d at pc %u in TclNRExecuteByteCode\n", + (unsigned) opCode, relativePc); + Tcl_Panic("TclNRExecuteByteCode execution failure: bad opcode"); + } + if (checkStack && + ((stackTop < 0) || (stackTop > stackUpperBound))) { + int numChars; + const char *cmd = GetSrcInfoForPc(pc, codePtr, &numChars, NULL, NULL); + + fprintf(stderr, "\nBad stack top %d at pc %u in TclNRExecuteByteCode (min 0, max %i)", + stackTop, relativePc, stackUpperBound); + if (cmd != NULL) { + Tcl_Obj *message; + + TclNewLiteralStringObj(message, "\n executing "); + Tcl_IncrRefCount(message); + Tcl_AppendLimitedToObj(message, cmd, numChars, 100, NULL); + fprintf(stderr,"%s\n", TclGetString(message)); + Tcl_DecrRefCount(message); + } else { + fprintf(stderr, "\n"); + } + Tcl_Panic("TclNRExecuteByteCode execution failure: bad stack top"); + } +} +#endif /* TCL_COMPILE_DEBUG */ + +/* + *---------------------------------------------------------------------- + * + * IllegalExprOperandType -- + * + * Used by TclNRExecuteByteCode to append an error message to the interp + * result when an illegal operand type is detected by an expression + * instruction. The argument opndPtr holds the operand object in error. + * + * Results: + * None. + * + * Side effects: + * An error message is appended to the interp result. + * + *---------------------------------------------------------------------- + */ + +static void +IllegalExprOperandType( + Tcl_Interp *interp, /* Interpreter to which error information + * pertains. */ + const unsigned char *pc, /* Points to the instruction being executed + * when the illegal type was found. */ + Tcl_Obj *opndPtr) /* Points to the operand holding the value + * with the illegal type. */ +{ + ClientData ptr; + int type; + const unsigned char opcode = *pc; + const char *description, *operator = "unknown"; + + if (opcode == INST_EXPON) { + operator = "**"; + } else if (opcode <= INST_LNOT) { + operator = operatorStrings[opcode - INST_LOR]; + } + + if (GetNumberFromObj(NULL, opndPtr, &ptr, &type) != TCL_OK) { + int numBytes; + const char *bytes = TclGetStringFromObj(opndPtr, &numBytes); + + if (numBytes == 0) { + description = "empty string"; + } else if (TclCheckBadOctal(NULL, bytes)) { + description = "invalid octal number"; + } else { + description = "non-numeric string"; + } + } else if (type == TCL_NUMBER_NAN) { + description = "non-numeric floating-point value"; + } else if (type == TCL_NUMBER_DOUBLE) { + description = "floating-point value"; + } else { + /* TODO: No caller needs this. Eliminate? */ + description = "(big) integer"; + } + + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "can't use %s as operand of \"%s\"", description, operator)); + Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", description, NULL); +} + +/* + *---------------------------------------------------------------------- + * + * TclGetSrcInfoForPc, GetSrcInfoForPc, TclGetSourceFromFrame -- + * + * Given a program counter value, finds the closest command in the + * bytecode code unit's CmdLocation array and returns information about + * that command's source: a pointer to its first byte and the number of + * characters. + * + * Results: + * If a command is found that encloses the program counter value, a + * pointer to the command's source is returned and the length of the + * source is stored at *lengthPtr. If multiple commands resulted in code + * at pc, information about the closest enclosing command is returned. If + * no matching command is found, NULL is returned and *lengthPtr is + * unchanged. + * + * Side effects: + * The CmdFrame at *cfPtr is updated. + * + *---------------------------------------------------------------------- + */ + +Tcl_Obj * +TclGetSourceFromFrame( + CmdFrame *cfPtr, + int objc, + Tcl_Obj *const objv[]) +{ + if (cfPtr == NULL) { + return Tcl_NewListObj(objc, objv); + } + if (cfPtr->cmdObj == NULL) { + if (cfPtr->cmd == NULL) { + ByteCode *codePtr = (ByteCode *) cfPtr->data.tebc.codePtr; + + cfPtr->cmd = GetSrcInfoForPc((unsigned char *) + cfPtr->data.tebc.pc, codePtr, &cfPtr->len, NULL, NULL); + } + if (cfPtr->cmd) { + cfPtr->cmdObj = Tcl_NewStringObj(cfPtr->cmd, cfPtr->len); + } else { + cfPtr->cmdObj = Tcl_NewListObj(objc, objv); + } + Tcl_IncrRefCount(cfPtr->cmdObj); + } + return cfPtr->cmdObj; +} + +void +TclGetSrcInfoForPc( + CmdFrame *cfPtr) +{ + ByteCode *codePtr = (ByteCode *) cfPtr->data.tebc.codePtr; + + assert(cfPtr->type == TCL_LOCATION_BC); + + if (cfPtr->cmd == NULL) { + + cfPtr->cmd = GetSrcInfoForPc( + (unsigned char *) cfPtr->data.tebc.pc, codePtr, + &cfPtr->len, NULL, NULL); + } + + if (cfPtr->cmd != NULL) { + /* + * We now have the command. We can get the srcOffset back and from + * there find the list of word locations for this command. + */ + + ExtCmdLoc *eclPtr; + ECL *locPtr = NULL; + int srcOffset, i; + Interp *iPtr = (Interp *) *codePtr->interpHandle; + Tcl_HashEntry *hePtr = + Tcl_FindHashEntry(iPtr->lineBCPtr, codePtr); + + if (!hePtr) { + return; + } + + srcOffset = cfPtr->cmd - codePtr->source; + eclPtr = Tcl_GetHashValue(hePtr); + + for (i=0; i < eclPtr->nuloc; i++) { + if (eclPtr->loc[i].srcOffset == srcOffset) { + locPtr = eclPtr->loc+i; + break; + } + } + if (locPtr == NULL) { + Tcl_Panic("LocSearch failure"); + } + + cfPtr->line = locPtr->line; + cfPtr->nline = locPtr->nline; + cfPtr->type = eclPtr->type; + + if (eclPtr->type == TCL_LOCATION_SOURCE) { + cfPtr->data.eval.path = eclPtr->path; + Tcl_IncrRefCount(cfPtr->data.eval.path); + } + + /* + * Do not set cfPtr->data.eval.path NULL for non-SOURCE. Needed for + * cfPtr->data.tebc.codePtr. + */ + } +} + +static const char * +GetSrcInfoForPc( + const unsigned char *pc, /* The program counter value for which to + * return the closest command's source info. + * This points within a bytecode instruction + * in codePtr's code. */ + ByteCode *codePtr, /* The bytecode sequence in which to look up + * the command source for the pc. */ + int *lengthPtr, /* If non-NULL, the location where the length + * of the command's source should be stored. + * If NULL, no length is stored. */ + const unsigned char **pcBeg,/* If non-NULL, the bytecode location + * where the current instruction starts. + * If NULL; no pointer is stored. */ + int *cmdIdxPtr) /* If non-NULL, the location where the index + * of the command containing the pc should + * be stored. */ +{ + register int pcOffset = (pc - codePtr->codeStart); + int numCmds = codePtr->numCommands; + unsigned char *codeDeltaNext, *codeLengthNext; + unsigned char *srcDeltaNext, *srcLengthNext; + int codeOffset, codeLen, codeEnd, srcOffset, srcLen, delta, i; + int bestDist = INT_MAX; /* Distance of pc to best cmd's start pc. */ + int bestSrcOffset = -1; /* Initialized to avoid compiler warning. */ + int bestSrcLength = -1; /* Initialized to avoid compiler warning. */ + int bestCmdIdx = -1; + + /* The pc must point within the bytecode */ + assert ((pcOffset >= 0) && (pcOffset < codePtr->numCodeBytes)); + + /* + * Decode the code and source offset and length for each command. The + * closest enclosing command is the last one whose code started before + * pcOffset. + */ + + codeDeltaNext = codePtr->codeDeltaStart; + codeLengthNext = codePtr->codeLengthStart; + srcDeltaNext = codePtr->srcDeltaStart; + srcLengthNext = codePtr->srcLengthStart; + codeOffset = srcOffset = 0; + for (i = 0; i < numCmds; i++) { + if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) { + codeDeltaNext++; + delta = TclGetInt4AtPtr(codeDeltaNext); + codeDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(codeDeltaNext); + codeDeltaNext++; + } + codeOffset += delta; + + if ((unsigned) *codeLengthNext == (unsigned) 0xFF) { + codeLengthNext++; + codeLen = TclGetInt4AtPtr(codeLengthNext); + codeLengthNext += 4; + } else { + codeLen = TclGetInt1AtPtr(codeLengthNext); + codeLengthNext++; + } + codeEnd = (codeOffset + codeLen - 1); + + if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) { + srcDeltaNext++; + delta = TclGetInt4AtPtr(srcDeltaNext); + srcDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(srcDeltaNext); + srcDeltaNext++; + } + srcOffset += delta; + + if ((unsigned) *srcLengthNext == (unsigned) 0xFF) { + srcLengthNext++; + srcLen = TclGetInt4AtPtr(srcLengthNext); + srcLengthNext += 4; + } else { + srcLen = TclGetInt1AtPtr(srcLengthNext); + srcLengthNext++; + } + + if (codeOffset > pcOffset) { /* Best cmd already found */ + break; + } + if (pcOffset <= codeEnd) { /* This cmd's code encloses pc */ + int dist = (pcOffset - codeOffset); + + if (dist <= bestDist) { + bestDist = dist; + bestSrcOffset = srcOffset; + bestSrcLength = srcLen; + bestCmdIdx = i; + } + } + } + + if (pcBeg != NULL) { + const unsigned char *curr, *prev; + + /* + * Walk from beginning of command or BC to pc, by complete + * instructions. Stop when crossing pc; keep previous. + */ + + curr = ((bestDist == INT_MAX) ? codePtr->codeStart : pc - bestDist); + prev = curr; + while (curr <= pc) { + prev = curr; + curr += tclInstructionTable[*curr].numBytes; + } + *pcBeg = prev; + } + + if (bestDist == INT_MAX) { + return NULL; + } + + if (lengthPtr != NULL) { + *lengthPtr = bestSrcLength; + } + + if (cmdIdxPtr != NULL) { + *cmdIdxPtr = bestCmdIdx; + } + + return (codePtr->source + bestSrcOffset); +} + +/* + *---------------------------------------------------------------------- + * + * GetExceptRangeForPc -- + * + * Given a program counter value, return the closest enclosing + * ExceptionRange. + * + * Results: + * If the searchMode is TCL_ERROR, this procedure ignores loop exception + * ranges and returns a pointer to the closest catch range. If the + * searchMode is TCL_BREAK, this procedure returns a pointer to the most + * closely enclosing ExceptionRange regardless of whether it is a loop or + * catch exception range. If the searchMode is TCL_CONTINUE, this + * procedure returns a pointer to the most closely enclosing + * ExceptionRange (of any type) skipping only loop exception ranges if + * they don't have a sensible continueOffset defined. If no matching + * ExceptionRange is found that encloses pc, a NULL is returned. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +static ExceptionRange * +GetExceptRangeForPc( + const unsigned char *pc, /* The program counter value for which to + * search for a closest enclosing exception + * range. This points to a bytecode + * instruction in codePtr's code. */ + int searchMode, /* If TCL_BREAK, consider either loop or catch + * ExceptionRanges in search. If TCL_ERROR + * consider only catch ranges (and ignore any + * closer loop ranges). If TCL_CONTINUE, look + * for loop ranges that define a continue + * point or a catch range. */ + ByteCode *codePtr) /* Points to the ByteCode in which to search + * for the enclosing ExceptionRange. */ +{ + ExceptionRange *rangeArrayPtr; + int numRanges = codePtr->numExceptRanges; + register ExceptionRange *rangePtr; + int pcOffset = pc - codePtr->codeStart; + register int start; + + if (numRanges == 0) { + return NULL; + } + + /* + * This exploits peculiarities of our compiler: nested ranges are always + * *after* their containing ranges, so that by scanning backwards we are + * sure that the first matching range is indeed the deepest. + */ + + rangeArrayPtr = codePtr->exceptArrayPtr; + rangePtr = rangeArrayPtr + numRanges; + while (--rangePtr >= rangeArrayPtr) { + start = rangePtr->codeOffset; + if ((start <= pcOffset) && + (pcOffset < (start + rangePtr->numCodeBytes))) { + if (rangePtr->type == CATCH_EXCEPTION_RANGE) { + return rangePtr; + } + if (searchMode == TCL_BREAK) { + return rangePtr; + } + if (searchMode == TCL_CONTINUE && rangePtr->continueOffset != -1){ + return rangePtr; + } + } + } + return NULL; +} + +/* + *---------------------------------------------------------------------- + * + * GetOpcodeName -- + * + * This procedure is called by the TRACE and TRACE_WITH_OBJ macros used + * in TclNRExecuteByteCode when debugging. It returns the name of the + * bytecode instruction at a specified instruction pc. + * + * Results: + * A character string for the instruction. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +#ifdef TCL_COMPILE_DEBUG +static const char * +GetOpcodeName( + const unsigned char *pc) /* Points to the instruction whose name should + * be returned. */ +{ + unsigned char opCode = *pc; + + return tclInstructionTable[opCode].name; +} +#endif /* TCL_COMPILE_DEBUG */ + +/* + *---------------------------------------------------------------------- + * + * TclExprFloatError -- + * + * This procedure is called when an error occurs during a floating-point + * operation. It reads errno and sets interp->objResultPtr accordingly. + * + * Results: + * interp->objResultPtr is set to hold an error message. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +void +TclExprFloatError( + Tcl_Interp *interp, /* Where to store error message. */ + double value) /* Value returned after error; used to + * distinguish underflows from overflows. */ +{ + const char *s; + + if ((errno == EDOM) || TclIsNaN(value)) { + s = "domain error: argument not in valid range"; + Tcl_SetObjResult(interp, Tcl_NewStringObj(s, -1)); + Tcl_SetErrorCode(interp, "ARITH", "DOMAIN", s, NULL); + } else if ((errno == ERANGE) || TclIsInfinite(value)) { + if (value == 0.0) { + s = "floating-point value too small to represent"; + Tcl_SetObjResult(interp, Tcl_NewStringObj(s, -1)); + Tcl_SetErrorCode(interp, "ARITH", "UNDERFLOW", s, NULL); + } else { + s = "floating-point value too large to represent"; + Tcl_SetObjResult(interp, Tcl_NewStringObj(s, -1)); + Tcl_SetErrorCode(interp, "ARITH", "OVERFLOW", s, NULL); + } + } else { + Tcl_Obj *objPtr = Tcl_ObjPrintf( + "unknown floating-point error, errno = %d", errno); + + Tcl_SetErrorCode(interp, "ARITH", "UNKNOWN", + TclGetString(objPtr), NULL); + Tcl_SetObjResult(interp, objPtr); + } +} + +#ifdef TCL_COMPILE_STATS +/* + *---------------------------------------------------------------------- + * + * TclLog2 -- + * + * Procedure used while collecting compilation statistics to determine + * the log base 2 of an integer. + * + * Results: + * Returns the log base 2 of the operand. If the argument is less than or + * equal to zero, a zero is returned. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +int +TclLog2( + register int value) /* The integer for which to compute the log + * base 2. */ +{ + register int n = value; + register int result = 0; + + while (n > 1) { + n = n >> 1; + result++; + } + return result; +} + +/* + *---------------------------------------------------------------------- + * + * EvalStatsCmd -- + * + * Implements the "evalstats" command that prints instruction execution + * counts to stdout. + * + * Results: + * Standard Tcl results. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +static int +EvalStatsCmd( + ClientData unused, /* Unused. */ + Tcl_Interp *interp, /* The current interpreter. */ + int objc, /* The number of arguments. */ + Tcl_Obj *const objv[]) /* The argument strings. */ +{ + Interp *iPtr = (Interp *) interp; + LiteralTable *globalTablePtr = &iPtr->literalTable; + ByteCodeStats *statsPtr = &iPtr->stats; + double totalCodeBytes, currentCodeBytes; + double totalLiteralBytes, currentLiteralBytes; + double objBytesIfUnshared, strBytesIfUnshared, sharingBytesSaved; + double strBytesSharedMultX, strBytesSharedOnce; + double numInstructions, currentHeaderBytes; + long numCurrentByteCodes, numByteCodeLits; + long refCountSum, literalMgmtBytes, sum; + int numSharedMultX, numSharedOnce; + int decadeHigh, minSizeDecade, maxSizeDecade, length, i; + char *litTableStats; + LiteralEntry *entryPtr; + Tcl_Obj *objPtr; + +#define Percent(a,b) ((a) * 100.0 / (b)) + + objPtr = Tcl_NewObj(); + Tcl_IncrRefCount(objPtr); + + numInstructions = 0.0; + for (i = 0; i < 256; i++) { + if (statsPtr->instructionCount[i] != 0) { + numInstructions += statsPtr->instructionCount[i]; + } + } + + totalLiteralBytes = sizeof(LiteralTable) + + iPtr->literalTable.numBuckets * sizeof(LiteralEntry *) + + (statsPtr->numLiteralsCreated * sizeof(LiteralEntry)) + + (statsPtr->numLiteralsCreated * sizeof(Tcl_Obj)) + + statsPtr->totalLitStringBytes; + totalCodeBytes = statsPtr->totalByteCodeBytes + totalLiteralBytes; + + numCurrentByteCodes = + statsPtr->numCompilations - statsPtr->numByteCodesFreed; + currentHeaderBytes = numCurrentByteCodes + * (sizeof(ByteCode) - sizeof(size_t) - sizeof(Tcl_Time)); + literalMgmtBytes = sizeof(LiteralTable) + + (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)) + + (iPtr->literalTable.numEntries * sizeof(LiteralEntry)); + currentLiteralBytes = literalMgmtBytes + + iPtr->literalTable.numEntries * sizeof(Tcl_Obj) + + statsPtr->currentLitStringBytes; + currentCodeBytes = statsPtr->currentByteCodeBytes + currentLiteralBytes; + + /* + * Summary statistics, total and current source and ByteCode sizes. + */ + + Tcl_AppendPrintfToObj(objPtr, "\n----------------------------------------------------------------\n"); + Tcl_AppendPrintfToObj(objPtr, + "Compilation and execution statistics for interpreter %#lx\n", + (long int)iPtr); + + Tcl_AppendPrintfToObj(objPtr, "\nNumber ByteCodes executed\t%ld\n", + statsPtr->numExecutions); + Tcl_AppendPrintfToObj(objPtr, "Number ByteCodes compiled\t%ld\n", + statsPtr->numCompilations); + Tcl_AppendPrintfToObj(objPtr, " Mean executions/compile\t%.1f\n", + statsPtr->numExecutions / (float)statsPtr->numCompilations); + + Tcl_AppendPrintfToObj(objPtr, "\nInstructions executed\t\t%.0f\n", + numInstructions); + Tcl_AppendPrintfToObj(objPtr, " Mean inst/compile\t\t%.0f\n", + numInstructions / statsPtr->numCompilations); + Tcl_AppendPrintfToObj(objPtr, " Mean inst/execution\t\t%.0f\n", + numInstructions / statsPtr->numExecutions); + + Tcl_AppendPrintfToObj(objPtr, "\nTotal ByteCodes\t\t\t%ld\n", + statsPtr->numCompilations); + Tcl_AppendPrintfToObj(objPtr, " Source bytes\t\t\t%.6g\n", + statsPtr->totalSrcBytes); + Tcl_AppendPrintfToObj(objPtr, " Code bytes\t\t\t%.6g\n", + totalCodeBytes); + Tcl_AppendPrintfToObj(objPtr, " ByteCode bytes\t\t%.6g\n", + statsPtr->totalByteCodeBytes); + Tcl_AppendPrintfToObj(objPtr, " Literal bytes\t\t%.6g\n", + totalLiteralBytes); + Tcl_AppendPrintfToObj(objPtr, " table %lu + bkts %lu + entries %lu + objects %lu + strings %.6g\n", + (unsigned long) sizeof(LiteralTable), + (unsigned long) (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)), + (unsigned long) (statsPtr->numLiteralsCreated * sizeof(LiteralEntry)), + (unsigned long) (statsPtr->numLiteralsCreated * sizeof(Tcl_Obj)), + statsPtr->totalLitStringBytes); + Tcl_AppendPrintfToObj(objPtr, " Mean code/compile\t\t%.1f\n", + totalCodeBytes / statsPtr->numCompilations); + Tcl_AppendPrintfToObj(objPtr, " Mean code/source\t\t%.1f\n", + totalCodeBytes / statsPtr->totalSrcBytes); + + Tcl_AppendPrintfToObj(objPtr, "\nCurrent (active) ByteCodes\t%ld\n", + numCurrentByteCodes); + Tcl_AppendPrintfToObj(objPtr, " Source bytes\t\t\t%.6g\n", + statsPtr->currentSrcBytes); + Tcl_AppendPrintfToObj(objPtr, " Code bytes\t\t\t%.6g\n", + currentCodeBytes); + Tcl_AppendPrintfToObj(objPtr, " ByteCode bytes\t\t%.6g\n", + statsPtr->currentByteCodeBytes); + Tcl_AppendPrintfToObj(objPtr, " Literal bytes\t\t%.6g\n", + currentLiteralBytes); + Tcl_AppendPrintfToObj(objPtr, " table %lu + bkts %lu + entries %lu + objects %lu + strings %.6g\n", + (unsigned long) sizeof(LiteralTable), + (unsigned long) (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(LiteralEntry)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(Tcl_Obj)), + statsPtr->currentLitStringBytes); + Tcl_AppendPrintfToObj(objPtr, " Mean code/source\t\t%.1f\n", + currentCodeBytes / statsPtr->currentSrcBytes); + Tcl_AppendPrintfToObj(objPtr, " Code + source bytes\t\t%.6g (%0.1f mean code/src)\n", + (currentCodeBytes + statsPtr->currentSrcBytes), + (currentCodeBytes / statsPtr->currentSrcBytes) + 1.0); + + /* + * Tcl_IsShared statistics check + * + * This gives the refcount of each obj as Tcl_IsShared was called for it. + * Shared objects must be duplicated before they can be modified. + */ + + numSharedMultX = 0; + Tcl_AppendPrintfToObj(objPtr, "\nTcl_IsShared object check (all objects):\n"); + Tcl_AppendPrintfToObj(objPtr, " Object had refcount <=1 (not shared)\t%ld\n", + tclObjsShared[1]); + for (i = 2; i < TCL_MAX_SHARED_OBJ_STATS; i++) { + Tcl_AppendPrintfToObj(objPtr, " refcount ==%d\t\t%ld\n", + i, tclObjsShared[i]); + numSharedMultX += tclObjsShared[i]; + } + Tcl_AppendPrintfToObj(objPtr, " refcount >=%d\t\t%ld\n", + i, tclObjsShared[0]); + numSharedMultX += tclObjsShared[0]; + Tcl_AppendPrintfToObj(objPtr, " Total shared objects\t\t\t%d\n", + numSharedMultX); + + /* + * Literal table statistics. + */ + + numByteCodeLits = 0; + refCountSum = 0; + numSharedMultX = 0; + numSharedOnce = 0; + objBytesIfUnshared = 0.0; + strBytesIfUnshared = 0.0; + strBytesSharedMultX = 0.0; + strBytesSharedOnce = 0.0; + for (i = 0; i < globalTablePtr->numBuckets; i++) { + for (entryPtr = globalTablePtr->buckets[i]; entryPtr != NULL; + entryPtr = entryPtr->nextPtr) { + if (entryPtr->objPtr->typePtr == &tclByteCodeType) { + numByteCodeLits++; + } + (void) TclGetStringFromObj(entryPtr->objPtr, &length); + refCountSum += entryPtr->refCount; + objBytesIfUnshared += (entryPtr->refCount * sizeof(Tcl_Obj)); + strBytesIfUnshared += (entryPtr->refCount * (length+1)); + if (entryPtr->refCount > 1) { + numSharedMultX++; + strBytesSharedMultX += (length+1); + } else { + numSharedOnce++; + strBytesSharedOnce += (length+1); + } + } + } + sharingBytesSaved = (objBytesIfUnshared + strBytesIfUnshared) + - currentLiteralBytes; + + Tcl_AppendPrintfToObj(objPtr, "\nTotal objects (all interps)\t%ld\n", + tclObjsAlloced); + Tcl_AppendPrintfToObj(objPtr, "Current objects\t\t\t%ld\n", + (tclObjsAlloced - tclObjsFreed)); + Tcl_AppendPrintfToObj(objPtr, "Total literal objects\t\t%ld\n", + statsPtr->numLiteralsCreated); + + Tcl_AppendPrintfToObj(objPtr, "\nCurrent literal objects\t\t%d (%0.1f%% of current objects)\n", + globalTablePtr->numEntries, + Percent(globalTablePtr->numEntries, tclObjsAlloced-tclObjsFreed)); + Tcl_AppendPrintfToObj(objPtr, " ByteCode literals\t\t%ld (%0.1f%% of current literals)\n", + numByteCodeLits, + Percent(numByteCodeLits, globalTablePtr->numEntries)); + Tcl_AppendPrintfToObj(objPtr, " Literals reused > 1x\t\t%d\n", + numSharedMultX); + Tcl_AppendPrintfToObj(objPtr, " Mean reference count\t\t%.2f\n", + ((double) refCountSum) / globalTablePtr->numEntries); + Tcl_AppendPrintfToObj(objPtr, " Mean len, str reused >1x \t%.2f\n", + (numSharedMultX ? strBytesSharedMultX/numSharedMultX : 0.0)); + Tcl_AppendPrintfToObj(objPtr, " Mean len, str used 1x\t\t%.2f\n", + (numSharedOnce ? strBytesSharedOnce/numSharedOnce : 0.0)); + Tcl_AppendPrintfToObj(objPtr, " Total sharing savings\t\t%.6g (%0.1f%% of bytes if no sharing)\n", + sharingBytesSaved, + Percent(sharingBytesSaved, objBytesIfUnshared+strBytesIfUnshared)); + Tcl_AppendPrintfToObj(objPtr, " Bytes with sharing\t\t%.6g\n", + currentLiteralBytes); + Tcl_AppendPrintfToObj(objPtr, " table %lu + bkts %lu + entries %lu + objects %lu + strings %.6g\n", + (unsigned long) sizeof(LiteralTable), + (unsigned long) (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(LiteralEntry)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(Tcl_Obj)), + statsPtr->currentLitStringBytes); + Tcl_AppendPrintfToObj(objPtr, " Bytes if no sharing\t\t%.6g = objects %.6g + strings %.6g\n", + (objBytesIfUnshared + strBytesIfUnshared), + objBytesIfUnshared, strBytesIfUnshared); + Tcl_AppendPrintfToObj(objPtr, " String sharing savings \t%.6g = unshared %.6g - shared %.6g\n", + (strBytesIfUnshared - statsPtr->currentLitStringBytes), + strBytesIfUnshared, statsPtr->currentLitStringBytes); + Tcl_AppendPrintfToObj(objPtr, " Literal mgmt overhead\t\t%ld (%0.1f%% of bytes with sharing)\n", + literalMgmtBytes, + Percent(literalMgmtBytes, currentLiteralBytes)); + Tcl_AppendPrintfToObj(objPtr, " table %lu + buckets %lu + entries %lu\n", + (unsigned long) sizeof(LiteralTable), + (unsigned long) (iPtr->literalTable.numBuckets * sizeof(LiteralEntry *)), + (unsigned long) (iPtr->literalTable.numEntries * sizeof(LiteralEntry))); + + /* + * Breakdown of current ByteCode space requirements. + */ + + Tcl_AppendPrintfToObj(objPtr, "\nBreakdown of current ByteCode requirements:\n"); + Tcl_AppendPrintfToObj(objPtr, " Bytes Pct of Avg per\n"); + Tcl_AppendPrintfToObj(objPtr, " total ByteCode\n"); + Tcl_AppendPrintfToObj(objPtr, "Total %12.6g 100.00%% %8.1f\n", + statsPtr->currentByteCodeBytes, + statsPtr->currentByteCodeBytes / numCurrentByteCodes); + Tcl_AppendPrintfToObj(objPtr, "Header %12.6g %8.1f%% %8.1f\n", + currentHeaderBytes, + Percent(currentHeaderBytes, statsPtr->currentByteCodeBytes), + currentHeaderBytes / numCurrentByteCodes); + Tcl_AppendPrintfToObj(objPtr, "Instructions %12.6g %8.1f%% %8.1f\n", + statsPtr->currentInstBytes, + Percent(statsPtr->currentInstBytes,statsPtr->currentByteCodeBytes), + statsPtr->currentInstBytes / numCurrentByteCodes); + Tcl_AppendPrintfToObj(objPtr, "Literal ptr array %12.6g %8.1f%% %8.1f\n", + statsPtr->currentLitBytes, + Percent(statsPtr->currentLitBytes,statsPtr->currentByteCodeBytes), + statsPtr->currentLitBytes / numCurrentByteCodes); + Tcl_AppendPrintfToObj(objPtr, "Exception table %12.6g %8.1f%% %8.1f\n", + statsPtr->currentExceptBytes, + Percent(statsPtr->currentExceptBytes,statsPtr->currentByteCodeBytes), + statsPtr->currentExceptBytes / numCurrentByteCodes); + Tcl_AppendPrintfToObj(objPtr, "Auxiliary data %12.6g %8.1f%% %8.1f\n", + statsPtr->currentAuxBytes, + Percent(statsPtr->currentAuxBytes,statsPtr->currentByteCodeBytes), + statsPtr->currentAuxBytes / numCurrentByteCodes); + Tcl_AppendPrintfToObj(objPtr, "Command map %12.6g %8.1f%% %8.1f\n", + statsPtr->currentCmdMapBytes, + Percent(statsPtr->currentCmdMapBytes,statsPtr->currentByteCodeBytes), + statsPtr->currentCmdMapBytes / numCurrentByteCodes); + + /* + * Detailed literal statistics. + */ + + Tcl_AppendPrintfToObj(objPtr, "\nLiteral string sizes:\n"); + Tcl_AppendPrintfToObj(objPtr, "\t Up to length\t\tPercentage\n"); + maxSizeDecade = 0; + for (i = 31; i >= 0; i--) { + if (statsPtr->literalCount[i] > 0) { + maxSizeDecade = i; + break; + } + } + sum = 0; + for (i = 0; i <= maxSizeDecade; i++) { + decadeHigh = (1 << (i+1)) - 1; + sum += statsPtr->literalCount[i]; + Tcl_AppendPrintfToObj(objPtr, "\t%10d\t\t%8.0f%%\n", + decadeHigh, Percent(sum, statsPtr->numLiteralsCreated)); + } + + litTableStats = TclLiteralStats(globalTablePtr); + Tcl_AppendPrintfToObj(objPtr, "\nCurrent literal table statistics:\n%s\n", + litTableStats); + ckfree(litTableStats); + + /* + * Source and ByteCode size distributions. + */ + + Tcl_AppendPrintfToObj(objPtr, "\nSource sizes:\n"); + Tcl_AppendPrintfToObj(objPtr, "\t Up to size\t\tPercentage\n"); + minSizeDecade = maxSizeDecade = 0; + for (i = 0; i < 31; i++) { + if (statsPtr->srcCount[i] > 0) { + minSizeDecade = i; + break; + } + } + for (i = 31; i >= 0; i--) { + if (statsPtr->srcCount[i] > 0) { + maxSizeDecade = i; + break; + } + } + sum = 0; + for (i = minSizeDecade; i <= maxSizeDecade; i++) { + decadeHigh = (1 << (i+1)) - 1; + sum += statsPtr->srcCount[i]; + Tcl_AppendPrintfToObj(objPtr, "\t%10d\t\t%8.0f%%\n", + decadeHigh, Percent(sum, statsPtr->numCompilations)); + } + + Tcl_AppendPrintfToObj(objPtr, "\nByteCode sizes:\n"); + Tcl_AppendPrintfToObj(objPtr, "\t Up to size\t\tPercentage\n"); + minSizeDecade = maxSizeDecade = 0; + for (i = 0; i < 31; i++) { + if (statsPtr->byteCodeCount[i] > 0) { + minSizeDecade = i; + break; + } + } + for (i = 31; i >= 0; i--) { + if (statsPtr->byteCodeCount[i] > 0) { + maxSizeDecade = i; + break; + } + } + sum = 0; + for (i = minSizeDecade; i <= maxSizeDecade; i++) { + decadeHigh = (1 << (i+1)) - 1; + sum += statsPtr->byteCodeCount[i]; + Tcl_AppendPrintfToObj(objPtr, "\t%10d\t\t%8.0f%%\n", + decadeHigh, Percent(sum, statsPtr->numCompilations)); + } + + Tcl_AppendPrintfToObj(objPtr, "\nByteCode longevity (excludes Current ByteCodes):\n"); + Tcl_AppendPrintfToObj(objPtr, "\t Up to ms\t\tPercentage\n"); + minSizeDecade = maxSizeDecade = 0; + for (i = 0; i < 31; i++) { + if (statsPtr->lifetimeCount[i] > 0) { + minSizeDecade = i; + break; + } + } + for (i = 31; i >= 0; i--) { + if (statsPtr->lifetimeCount[i] > 0) { + maxSizeDecade = i; + break; + } + } + sum = 0; + for (i = minSizeDecade; i <= maxSizeDecade; i++) { + decadeHigh = (1 << (i+1)) - 1; + sum += statsPtr->lifetimeCount[i]; + Tcl_AppendPrintfToObj(objPtr, "\t%12.3f\t\t%8.0f%%\n", + decadeHigh/1000.0, Percent(sum, statsPtr->numByteCodesFreed)); + } + + /* + * Instruction counts. + */ + + Tcl_AppendPrintfToObj(objPtr, "\nInstruction counts:\n"); + for (i = 0; i <= LAST_INST_OPCODE; i++) { + Tcl_AppendPrintfToObj(objPtr, "%20s %8ld ", + tclInstructionTable[i].name, statsPtr->instructionCount[i]); + if (statsPtr->instructionCount[i]) { + Tcl_AppendPrintfToObj(objPtr, "%6.1f%%\n", + Percent(statsPtr->instructionCount[i], numInstructions)); + } else { + Tcl_AppendPrintfToObj(objPtr, "0\n"); + } + } + +#ifdef TCL_MEM_DEBUG + Tcl_AppendPrintfToObj(objPtr, "\nHeap Statistics:\n"); + TclDumpMemoryInfo((ClientData) objPtr, 1); +#endif + Tcl_AppendPrintfToObj(objPtr, "\n----------------------------------------------------------------\n"); + + if (objc == 1) { + Tcl_SetObjResult(interp, objPtr); + } else { + Tcl_Channel outChan; + char *str = TclGetStringFromObj(objv[1], &length); + + if (length) { + if (strcmp(str, "stdout") == 0) { + outChan = Tcl_GetStdChannel(TCL_STDOUT); + } else if (strcmp(str, "stderr") == 0) { + outChan = Tcl_GetStdChannel(TCL_STDERR); + } else { + outChan = Tcl_OpenFileChannel(NULL, str, "w", 0664); + } + } else { + outChan = Tcl_GetStdChannel(TCL_STDOUT); + } + if (outChan != NULL) { + Tcl_WriteObj(outChan, objPtr); + } + } + Tcl_DecrRefCount(objPtr); + return TCL_OK; +} +#endif /* TCL_COMPILE_STATS */ + +#ifdef TCL_COMPILE_DEBUG +/* + *---------------------------------------------------------------------- + * + * StringForResultCode -- + * + * Procedure that returns a human-readable string representing a Tcl + * result code such as TCL_ERROR. + * + * Results: + * If the result code is one of the standard Tcl return codes, the result + * is a string representing that code such as "TCL_ERROR". Otherwise, the + * result string is that code formatted as a sequence of decimal digit + * characters. Note that the resulting string must not be modified by the + * caller. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +static const char * +StringForResultCode( + int result) /* The Tcl result code for which to generate a + * string. */ +{ + static char buf[TCL_INTEGER_SPACE]; + + if ((result >= TCL_OK) && (result <= TCL_CONTINUE)) { + return resultStrings[result]; + } + TclFormatInt(buf, result); + return buf; +} +#endif /* TCL_COMPILE_DEBUG */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 4 + * fill-column: 78 + * End: + */ |