summaryrefslogtreecommitdiffstats
path: root/generic/tclIO.c
diff options
context:
space:
mode:
Diffstat (limited to 'generic/tclIO.c')
-rw-r--r--generic/tclIO.c308
1 files changed, 7 insertions, 301 deletions
diff --git a/generic/tclIO.c b/generic/tclIO.c
index 78ad629..dd9f1dc 100644
--- a/generic/tclIO.c
+++ b/generic/tclIO.c
@@ -165,8 +165,6 @@ static ChannelBuffer * AllocChannelBuffer(int length);
static void ChannelTimerProc(ClientData clientData);
static int CheckChannelErrors(ChannelState *statePtr,
int direction);
-static int CheckFlush(Channel *chanPtr, ChannelBuffer *bufPtr,
- int newlineFlag);
static int CheckForDeadChannel(Tcl_Interp *interp,
ChannelState *statePtr);
static void CheckForStdChannelsBeingClosed(Tcl_Channel chan);
@@ -220,20 +218,19 @@ static int SetBlockMode(Tcl_Interp *interp, Channel *chanPtr,
static void StopCopy(CopyState *csPtr);
static int TranslateInputEOL(ChannelState *statePtr, char *dst,
const char *src, int *dstLenPtr, int *srcLenPtr);
-static int TranslateOutputEOL(ChannelState *statePtr, char *dst,
- const char *src, int *dstLenPtr, int *srcLenPtr);
static void UpdateInterest(Channel *chanPtr);
static int Write(Channel *chanPtr, const char *src,
int srcLen, Tcl_Encoding encoding);
-static int WriteBytes(Channel *chanPtr, const char *src,
- int srcLen);
-static int WriteChars(Channel *chanPtr, const char *src,
- int srcLen);
static Tcl_Obj * FixLevelCode(Tcl_Obj *msg);
static void SpliceChannel(Tcl_Channel chan);
static void CutChannel(Tcl_Channel chan);
static int WillRead(Channel *chanPtr);
+#define WriteChars(chanPtr, src, srcLen) \
+ Write(chanPtr, src, srcLen, chanPtr->state->encoding)
+#define WriteBytes(chanPtr, src, srcLen) \
+ Write(chanPtr, src, srcLen, tclIdentityEncoding)
+
/*
* Simplifying helper macros. All may use their argument(s) multiple times.
* The ANSI C "prototypes" for the macros are listed below, together with a
@@ -3619,114 +3616,9 @@ static int WillRead(Channel *chanPtr)
/*
*----------------------------------------------------------------------
*
- * WriteBytes --
- *
- * Write a sequence of bytes into an output buffer, may queue the buffer
- * for output if it gets full, and also remembers whether the current
- * buffer is ready e.g. if it contains a newline and we are in line
- * buffering mode.
- *
- * Results:
- * The number of bytes written or -1 in case of error. If -1,
- * Tcl_GetErrno will return the error code.
- *
- * Side effects:
- * May buffer up output and may cause output to be produced on the
- * channel.
+ * Write --
*
- *----------------------------------------------------------------------
- */
-
-static int
-WriteBytes(
- Channel *chanPtr, /* The channel to buffer output for. */
- const char *src, /* Bytes to write. */
- int srcLen) /* Number of bytes to write. */
-{
-#if 1
- return Write(chanPtr, src, srcLen, tclIdentityEncoding);
-#else
- ChannelState *statePtr = chanPtr->state;
- /* State info for channel */
- ChannelBuffer *bufPtr;
- char *dst;
- int dstMax, sawLF, savedLF, total, dstLen, toWrite, translate;
-
- if (srcLen) {
- WillWrite(chanPtr);
- }
-
- total = 0;
- sawLF = 0;
- savedLF = 0;
- translate = (statePtr->flags & CHANNEL_LINEBUFFERED)
- || (statePtr->outputTranslation != TCL_TRANSLATE_LF);
-
- /*
- * Loop over all bytes in src, storing them in output buffer with proper
- * EOL translation.
- */
-
- while (srcLen + savedLF > 0) {
- bufPtr = statePtr->curOutPtr;
- if (bufPtr == NULL) {
- bufPtr = AllocChannelBuffer(statePtr->bufSize);
- statePtr->curOutPtr = bufPtr;
- }
- dst = InsertPoint(bufPtr);
- dstMax = SpaceLeft(bufPtr);
- dstLen = dstMax;
-
- toWrite = dstLen;
- if (toWrite > srcLen) {
- toWrite = srcLen;
- }
-
- if (translate) {
- if (savedLF) {
- /*
- * A '\n' was left over from last call to TranslateOutputEOL()
- * and we need to store it in this buffer. If the channel is
- * line-based, we will need to flush it.
- */
-
- *dst++ = '\n';
- dstLen--;
- sawLF++;
- }
- if (TranslateOutputEOL(statePtr, dst, src, &dstLen, &toWrite)) {
- sawLF++;
- }
- dstLen += savedLF;
- savedLF = 0;
- if (dstLen > dstMax) {
- savedLF = 1;
- dstLen = dstMax;
- }
- } else {
- memcpy(dst, src, toWrite);
- dstLen = toWrite;
- }
-
- bufPtr->nextAdded += dstLen;
- if (CheckFlush(chanPtr, bufPtr, sawLF) != 0) {
- return -1;
- }
- total += dstLen;
- src += toWrite;
- srcLen -= toWrite;
- sawLF = 0;
- }
- return total;
-#endif
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * WriteChars --
- *
- * Convert UTF-8 bytes to the channel's external encoding and write the
+ * Convert srcLen bytes starting at src according to encoding and write
* produced bytes into an output buffer, may queue the buffer for output
* if it gets full, and also remembers whether the current buffer is
* ready e.g. if it contains a newline and we are in line buffering mode.
@@ -3901,192 +3793,6 @@ Write(
return total;
}
-
-static int
-WriteChars(
- Channel *chanPtr, /* The channel to buffer output for. */
- const char *src, /* UTF-8 string to write. */
- int srcLen) /* Length of UTF-8 string in bytes. */
-{
- return Write(chanPtr, src, srcLen, chanPtr->state->encoding);
-}
-
-/*
- *---------------------------------------------------------------------------
- *
- * TranslateOutputEOL --
- *
- * Helper function for WriteBytes() and WriteChars(). Converts the '\n'
- * characters in the source buffer into the appropriate EOL form
- * specified by the output translation mode.
- *
- * EOL translation stops either when the source buffer is empty or the
- * output buffer is full.
- *
- * When converting to CRLF mode and there is only 1 byte left in the
- * output buffer, this routine stores the '\r' in the last byte and then
- * stores the '\n' in the byte just past the end of the buffer. The
- * caller is responsible for passing in a buffer that is large enough to
- * hold the extra byte.
- *
- * Results:
- * The return value is 1 if a '\n' was translated from the source buffer,
- * or 0 otherwise -- this can be used by the caller to decide to flush a
- * line-based channel even though the channel buffer is not full.
- *
- * *dstLenPtr is filled with how many bytes of the output buffer were
- * used. As mentioned above, this can be one more that the output
- * buffer's specified length if a CRLF was stored.
- *
- * *srcLenPtr is filled with how many bytes of the source buffer were
- * consumed.
- *
- * Side effects:
- * It may be obvious, but bears mentioning that when converting in CRLF
- * mode (which requires two bytes of storage in the output buffer), the
- * number of bytes consumed from the source buffer will be less than the
- * number of bytes stored in the output buffer.
- *
- *---------------------------------------------------------------------------
- */
-
-static int
-TranslateOutputEOL(
- ChannelState *statePtr, /* Channel being read, for translation and
- * buffering modes. */
- char *dst, /* Output buffer filled with UTF-8 chars by
- * applying appropriate EOL translation to
- * source characters. */
- const char *src, /* Source UTF-8 characters. */
- int *dstLenPtr, /* On entry, the maximum length of output
- * buffer in bytes. On exit, the number of
- * bytes actually used in output buffer. */
- int *srcLenPtr) /* On entry, the length of source buffer. On
- * exit, the number of bytes read from the
- * source buffer. */
-{
- char *dstEnd;
- int srcLen, newlineFound;
-
- newlineFound = 0;
- srcLen = *srcLenPtr;
-
- switch (statePtr->outputTranslation) {
- case TCL_TRANSLATE_LF:
- for (dstEnd = dst + srcLen; dst < dstEnd; ) {
- if (*src == '\n') {
- newlineFound = 1;
- }
- *dst++ = *src++;
- }
- *dstLenPtr = srcLen;
- break;
- case TCL_TRANSLATE_CR:
- for (dstEnd = dst + srcLen; dst < dstEnd;) {
- if (*src == '\n') {
- *dst++ = '\r';
- newlineFound = 1;
- src++;
- } else {
- *dst++ = *src++;
- }
- }
- *dstLenPtr = srcLen;
- break;
- case TCL_TRANSLATE_CRLF: {
- /*
- * Since this causes the number of bytes to grow, we start off trying
- * to put 'srcLen' bytes into the output buffer, but allow it to store
- * more bytes, as long as there's still source bytes and room in the
- * output buffer.
- */
-
- char *dstStart, *dstMax;
- const char *srcStart;
-
- dstStart = dst;
- dstMax = dst + *dstLenPtr;
-
- srcStart = src;
-
- if (srcLen < *dstLenPtr) {
- dstEnd = dst + srcLen;
- } else {
- dstEnd = dst + *dstLenPtr;
- }
- while (dst < dstEnd) {
- if (*src == '\n') {
- if (dstEnd < dstMax) {
- dstEnd++;
- }
- *dst++ = '\r';
- newlineFound = 1;
- }
- *dst++ = *src++;
- }
- *srcLenPtr = src - srcStart;
- *dstLenPtr = dst - dstStart;
- break;
- }
- default:
- break;
- }
- return newlineFound;
-}
-
-/*
- *---------------------------------------------------------------------------
- *
- * CheckFlush --
- *
- * Helper function for WriteBytes() and WriteChars(). If the channel
- * buffer is ready to be flushed, flush it.
- *
- * Results:
- * The return value is -1 if there was a problem flushing the channel
- * buffer, or 0 otherwise.
- *
- * Side effects:
- * The buffer will be recycled if it is flushed.
- *
- *---------------------------------------------------------------------------
- */
-
-static int
-CheckFlush(
- Channel *chanPtr, /* Channel being read, for buffering mode. */
- ChannelBuffer *bufPtr, /* Channel buffer to possibly flush. */
- int newlineFlag) /* Non-zero if a the channel buffer contains a
- * newline. */
-{
- ChannelState *statePtr = chanPtr->state;
- /* State info for channel */
-
- /*
- * The current buffer is ready for output:
- * 1. if it is full.
- * 2. if it contains a newline and this channel is line-buffered.
- * 3. if it contains any output and this channel is unbuffered.
- */
-
- if ((statePtr->flags & BUFFER_READY) == 0) {
- if (IsBufferFull(bufPtr)) {
- SetFlag(statePtr, BUFFER_READY);
- } else if (statePtr->flags & CHANNEL_LINEBUFFERED) {
- if (newlineFlag != 0) {
- SetFlag(statePtr, BUFFER_READY);
- }
- } else if (statePtr->flags & CHANNEL_UNBUFFERED) {
- SetFlag(statePtr, BUFFER_READY);
- }
- }
- if (statePtr->flags & BUFFER_READY) {
- if (FlushChannel(NULL, chanPtr, 0) != 0) {
- return -1;
- }
- }
- return 0;
-}
/*
*---------------------------------------------------------------------------