diff options
Diffstat (limited to 'generic/tclInt.h')
-rw-r--r-- | generic/tclInt.h | 4685 |
1 files changed, 2994 insertions, 1691 deletions
diff --git a/generic/tclInt.h b/generic/tclInt.h index a9a876e..92251fe 100644 --- a/generic/tclInt.h +++ b/generic/tclInt.h @@ -10,35 +10,34 @@ * Copyright (c) 2001, 2002 by Kevin B. Kenny. All rights reserved. * Copyright (c) 2007 Daniel A. Steffen <das@users.sourceforge.net> * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #ifndef _TCLINT #define _TCLINT /* - * Common include files needed by most of the Tcl source files are - * included here, so that system-dependent personalizations for the - * include files only have to be made in once place. This results - * in a few extra includes, but greater modularity. The order of - * the three groups of #includes is important. For example, stdio.h - * is needed by tcl.h, and the _ANSI_ARGS_ declaration in tcl.h is - * needed by stdlib.h in some configurations. + * Some numerics configuration options. */ -#ifndef _TCL -#include "tcl.h" -#endif +#undef NO_WIDE_TYPE +#undef ACCEPT_NAN + +/* + * Common include files needed by most of the Tcl source files are included + * here, so that system-dependent personalizations for the include files only + * have to be made in once place. This results in a few extra includes, but + * greater modularity. The order of the three groups of #includes is + * important. For example, stdio.h is needed by tcl.h, and the _ANSI_ARGS_ + * declaration in tcl.h is needed by stdlib.h in some configurations. + */ + +#include "tclPort.h" #include <stdio.h> #include <ctype.h> -#ifdef NO_LIMITS_H -# include "../compat/limits.h" -#else -# include <limits.h> -#endif #ifdef NO_STDLIB_H # include "../compat/stdlib.h" #else @@ -49,9 +48,14 @@ #else #include <string.h> #endif +#ifdef STDC_HEADERS +#include <stddef.h> +#else +typedef int ptrdiff_t; +#endif /* - * Ensure WORDS_BIGENDIAN is defined correcly: + * Ensure WORDS_BIGENDIAN is defined correctly: * Needs to happen here in addition to configure to work with fat compiles on * Darwin (where configure runs only once for multiple architectures). */ @@ -64,15 +68,15 @@ #endif #ifdef BYTE_ORDER # ifdef BIG_ENDIAN -# if BYTE_ORDER == BIG_ENDIAN -# undef WORDS_BIGENDIAN -# define WORDS_BIGENDIAN 1 -# endif +# if BYTE_ORDER == BIG_ENDIAN +# undef WORDS_BIGENDIAN +# define WORDS_BIGENDIAN 1 +# endif # endif # ifdef LITTLE_ENDIAN -# if BYTE_ORDER == LITTLE_ENDIAN -# undef WORDS_BIGENDIAN -# endif +# if BYTE_ORDER == LITTLE_ENDIAN +# undef WORDS_BIGENDIAN +# endif # endif #endif @@ -89,66 +93,83 @@ # endif #endif -#undef TCL_STORAGE_CLASS -#ifdef BUILD_tcl -# define TCL_STORAGE_CLASS DLLEXPORT -#else -# ifdef USE_TCL_STUBS -# define TCL_STORAGE_CLASS -# else -# define TCL_STORAGE_CLASS DLLIMPORT -# endif +/* + * When Tcl_WideInt and long are the same type, there's no value in + * having a tclWideIntType separate from the tclIntType. + */ +#ifdef TCL_WIDE_INT_IS_LONG +#define NO_WIDE_TYPE +#endif + +/* + * Macros used to cast between pointers and integers (e.g. when storing an int + * in ClientData), on 64-bit architectures they avoid gcc warning about "cast + * to/from pointer from/to integer of different size". + */ + +#if !defined(INT2PTR) && !defined(PTR2INT) +# if defined(HAVE_INTPTR_T) || defined(intptr_t) +# define INT2PTR(p) ((void *)(intptr_t)(p)) +# define PTR2INT(p) ((int)(intptr_t)(p)) +# else +# define INT2PTR(p) ((void *)(p)) +# define PTR2INT(p) ((int)(p)) +# endif +#endif +#if !defined(UINT2PTR) && !defined(PTR2UINT) +# if defined(HAVE_UINTPTR_T) || defined(uintptr_t) +# define UINT2PTR(p) ((void *)(uintptr_t)(p)) +# define PTR2UINT(p) ((unsigned int)(uintptr_t)(p)) +# else +# define UINT2PTR(p) ((void *)(p)) +# define PTR2UINT(p) ((unsigned int)(p)) +# endif #endif /* - * The following procedures allow namespaces to be customized to - * support special name resolution rules for commands/variables. - * + * The following procedures allow namespaces to be customized to support + * special name resolution rules for commands/variables. */ struct Tcl_ResolvedVarInfo; -typedef Tcl_Var (Tcl_ResolveRuntimeVarProc) _ANSI_ARGS_(( - Tcl_Interp* interp, struct Tcl_ResolvedVarInfo *vinfoPtr)); +typedef Tcl_Var (Tcl_ResolveRuntimeVarProc)(Tcl_Interp *interp, + struct Tcl_ResolvedVarInfo *vinfoPtr); -typedef void (Tcl_ResolveVarDeleteProc) _ANSI_ARGS_(( - struct Tcl_ResolvedVarInfo *vinfoPtr)); +typedef void (Tcl_ResolveVarDeleteProc)(struct Tcl_ResolvedVarInfo *vinfoPtr); /* * The following structure encapsulates the routines needed to resolve a - * variable reference at runtime. Any variable specific state will typically + * variable reference at runtime. Any variable specific state will typically * be appended to this structure. */ - typedef struct Tcl_ResolvedVarInfo { Tcl_ResolveRuntimeVarProc *fetchProc; Tcl_ResolveVarDeleteProc *deleteProc; } Tcl_ResolvedVarInfo; +typedef int (Tcl_ResolveCompiledVarProc)(Tcl_Interp *interp, + CONST84 char *name, int length, Tcl_Namespace *context, + Tcl_ResolvedVarInfo **rPtr); +typedef int (Tcl_ResolveVarProc)(Tcl_Interp *interp, CONST84 char *name, + Tcl_Namespace *context, int flags, Tcl_Var *rPtr); -typedef int (Tcl_ResolveCompiledVarProc) _ANSI_ARGS_(( - Tcl_Interp* interp, CONST84 char* name, int length, - Tcl_Namespace *context, Tcl_ResolvedVarInfo **rPtr)); - -typedef int (Tcl_ResolveVarProc) _ANSI_ARGS_(( - Tcl_Interp* interp, CONST84 char* name, Tcl_Namespace *context, - int flags, Tcl_Var *rPtr)); +typedef int (Tcl_ResolveCmdProc)(Tcl_Interp *interp, CONST84 char *name, + Tcl_Namespace *context, int flags, Tcl_Command *rPtr); -typedef int (Tcl_ResolveCmdProc) _ANSI_ARGS_((Tcl_Interp* interp, - CONST84 char* name, Tcl_Namespace *context, int flags, - Tcl_Command *rPtr)); - typedef struct Tcl_ResolverInfo { - Tcl_ResolveCmdProc *cmdResProc; /* Procedure handling command name - * resolution. */ - Tcl_ResolveVarProc *varResProc; /* Procedure handling variable name - * resolution for variables that - * can only be handled at runtime. */ + Tcl_ResolveCmdProc *cmdResProc; + /* Procedure handling command name + * resolution. */ + Tcl_ResolveVarProc *varResProc; + /* Procedure handling variable name resolution + * for variables that can only be handled at + * runtime. */ Tcl_ResolveCompiledVarProc *compiledVarResProc; - /* Procedure handling variable name - * resolution at compile time. */ + /* Procedure handling variable name resolution + * at compile time. */ } Tcl_ResolverInfo; /* @@ -157,427 +178,526 @@ typedef struct Tcl_ResolverInfo { *---------------------------------------------------------------- */ +typedef struct Tcl_Ensemble Tcl_Ensemble; +typedef struct NamespacePathEntry NamespacePathEntry; + +/* + * Special hashtable for variables: this is just a Tcl_HashTable with an nsPtr + * field added at the end: in this way variables can find their namespace + * without having to copy a pointer in their struct: they can access it via + * their hPtr->tablePtr. + */ + +typedef struct TclVarHashTable { + Tcl_HashTable table; + struct Namespace *nsPtr; +} TclVarHashTable; + +/* + * This is for itcl - it likes to search our varTables directly :( + */ + +#define TclVarHashFindVar(tablePtr, key) \ + TclVarHashCreateVar((tablePtr), (key), NULL) + + /* * The structure below defines a namespace. * Note: the first five fields must match exactly the fields in a - * Tcl_Namespace structure (see tcl.h). If you change one, be sure to - * change the other. + * Tcl_Namespace structure (see tcl.h). If you change one, be sure to change + * the other. */ typedef struct Namespace { - char *name; /* The namespace's simple (unqualified) - * name. This contains no ::'s. The name of - * the global namespace is "" although "::" - * is an synonym. */ - char *fullName; /* The namespace's fully qualified name. - * This starts with ::. */ - ClientData clientData; /* An arbitrary value associated with this - * namespace. */ + char *name; /* The namespace's simple (unqualified) name. + * This contains no ::'s. The name of the + * global namespace is "" although "::" is an + * synonym. */ + char *fullName; /* The namespace's fully qualified name. This + * starts with ::. */ + ClientData clientData; /* An arbitrary value associated with this + * namespace. */ Tcl_NamespaceDeleteProc *deleteProc; - /* Procedure invoked when deleting the - * namespace to, e.g., free clientData. */ - struct Namespace *parentPtr; /* Points to the namespace that contains - * this one. NULL if this is the global - * namespace. */ - Tcl_HashTable childTable; /* Contains any child namespaces. Indexed - * by strings; values have type - * (Namespace *). */ - long nsId; /* Unique id for the namespace. */ - Tcl_Interp *interp; /* The interpreter containing this - * namespace. */ - int flags; /* OR-ed combination of the namespace - * status flags NS_DYING and NS_DEAD - * listed below. */ - int activationCount; /* Number of "activations" or active call - * frames for this namespace that are on - * the Tcl call stack. The namespace won't - * be freed until activationCount becomes - * zero. */ - int refCount; /* Count of references by namespaceName * - * objects. The namespace can't be freed - * until refCount becomes zero. */ - Tcl_HashTable cmdTable; /* Contains all the commands currently - * registered in the namespace. Indexed by - * strings; values have type (Command *). - * Commands imported by Tcl_Import have - * Command structures that point (via an - * ImportedCmdRef structure) to the - * Command structure in the source - * namespace's command table. */ - Tcl_HashTable varTable; /* Contains all the (global) variables - * currently in this namespace. Indexed - * by strings; values have type (Var *). */ - char **exportArrayPtr; /* Points to an array of string patterns - * specifying which commands are exported. - * A pattern may include "string match" - * style wildcard characters to specify - * multiple commands; however, no namespace - * qualifiers are allowed. NULL if no - * export patterns are registered. */ - int numExportPatterns; /* Number of export patterns currently - * registered using "namespace export". */ - int maxExportPatterns; /* Mumber of export patterns for which - * space is currently allocated. */ - int cmdRefEpoch; /* Incremented if a newly added command - * shadows a command for which this - * namespace has already cached a Command * - * pointer; this causes all its cached - * Command* pointers to be invalidated. */ - int resolverEpoch; /* Incremented whenever (a) the name resolution - * rules change for this namespace or (b) a - * newly added command shadows a command that - * is compiled to bytecodes. - * This invalidates all byte codes compiled - * in the namespace, causing the code to be - * recompiled under the new rules.*/ + /* Procedure invoked when deleting the + * namespace to, e.g., free clientData. */ + struct Namespace *parentPtr;/* Points to the namespace that contains this + * one. NULL if this is the global + * namespace. */ + Tcl_HashTable childTable; /* Contains any child namespaces. Indexed by + * strings; values have type (Namespace *). */ + long nsId; /* Unique id for the namespace. */ + Tcl_Interp *interp; /* The interpreter containing this + * namespace. */ + int flags; /* OR-ed combination of the namespace status + * flags NS_DYING and NS_DEAD listed below. */ + int activationCount; /* Number of "activations" or active call + * frames for this namespace that are on the + * Tcl call stack. The namespace won't be + * freed until activationCount becomes zero. */ + int refCount; /* Count of references by namespaceName + * objects. The namespace can't be freed until + * refCount becomes zero. */ + Tcl_HashTable cmdTable; /* Contains all the commands currently + * registered in the namespace. Indexed by + * strings; values have type (Command *). + * Commands imported by Tcl_Import have + * Command structures that point (via an + * ImportedCmdRef structure) to the Command + * structure in the source namespace's command + * table. */ + TclVarHashTable varTable; /* Contains all the (global) variables + * currently in this namespace. Indexed by + * strings; values have type (Var *). */ + char **exportArrayPtr; /* Points to an array of string patterns + * specifying which commands are exported. A + * pattern may include "string match" style + * wildcard characters to specify multiple + * commands; however, no namespace qualifiers + * are allowed. NULL if no export patterns are + * registered. */ + int numExportPatterns; /* Number of export patterns currently + * registered using "namespace export". */ + int maxExportPatterns; /* Mumber of export patterns for which space + * is currently allocated. */ + int cmdRefEpoch; /* Incremented if a newly added command + * shadows a command for which this namespace + * has already cached a Command* pointer; this + * causes all its cached Command* pointers to + * be invalidated. */ + int resolverEpoch; /* Incremented whenever (a) the name + * resolution rules change for this namespace + * or (b) a newly added command shadows a + * command that is compiled to bytecodes. This + * invalidates all byte codes compiled in the + * namespace, causing the code to be + * recompiled under the new rules.*/ Tcl_ResolveCmdProc *cmdResProc; - /* If non-null, this procedure overrides - * the usual command resolution mechanism - * in Tcl. This procedure is invoked - * within Tcl_FindCommand to resolve all - * command references within the namespace. */ + /* If non-null, this procedure overrides the + * usual command resolution mechanism in Tcl. + * This procedure is invoked within + * Tcl_FindCommand to resolve all command + * references within the namespace. */ Tcl_ResolveVarProc *varResProc; - /* If non-null, this procedure overrides - * the usual variable resolution mechanism - * in Tcl. This procedure is invoked - * within Tcl_FindNamespaceVar to resolve all - * variable references within the namespace - * at runtime. */ + /* If non-null, this procedure overrides the + * usual variable resolution mechanism in Tcl. + * This procedure is invoked within + * Tcl_FindNamespaceVar to resolve all + * variable references within the namespace at + * runtime. */ Tcl_ResolveCompiledVarProc *compiledVarResProc; - /* If non-null, this procedure overrides - * the usual variable resolution mechanism - * in Tcl. This procedure is invoked - * within LookupCompiledLocal to resolve - * variable references within the namespace - * at compile time. */ + /* If non-null, this procedure overrides the + * usual variable resolution mechanism in Tcl. + * This procedure is invoked within + * LookupCompiledLocal to resolve variable + * references within the namespace at compile + * time. */ + int exportLookupEpoch; /* Incremented whenever a command is added to + * a namespace, removed from a namespace or + * the exports of a namespace are changed. + * Allows TIP#112-driven command lists to be + * validated efficiently. */ + Tcl_Ensemble *ensembles; /* List of structures that contain the details + * of the ensembles that are implemented on + * top of this namespace. */ + Tcl_Obj *unknownHandlerPtr; /* A script fragment to be used when command + * resolution in this namespace fails. TIP + * 181. */ + int commandPathLength; /* The length of the explicit path. */ + NamespacePathEntry *commandPathArray; + /* The explicit path of the namespace as an + * array. */ + NamespacePathEntry *commandPathSourceList; + /* Linked list of path entries that point to + * this namespace. */ } Namespace; /* + * An entry on a namespace's command resolution path. + */ + +struct NamespacePathEntry { + Namespace *nsPtr; /* What does this path entry point to? If it + * is NULL, this path entry points is + * redundant and should be skipped. */ + Namespace *creatorNsPtr; /* Where does this path entry point from? This + * allows for efficient invalidation of + * references when the path entry's target + * updates its current list of defined + * commands. */ + NamespacePathEntry *prevPtr, *nextPtr; + /* Linked list pointers or NULL at either end + * of the list that hangs off Namespace's + * commandPathSourceList field. */ +}; + +/* * Flags used to represent the status of a namespace: * * NS_DYING - 1 means Tcl_DeleteNamespace has been called to delete the * namespace but there are still active call frames on the Tcl * stack that refer to the namespace. When the last call frame * referring to it has been popped, it's variables and command - * will be destroyed and it will be marked "dead" (NS_DEAD). - * The namespace can no longer be looked up by name. + * will be destroyed and it will be marked "dead" (NS_DEAD). The + * namespace can no longer be looked up by name. * NS_DEAD - 1 means Tcl_DeleteNamespace has been called to delete the - * namespace and no call frames still refer to it. Its - * variables and command have already been destroyed. This bit - * allows the namespace resolution code to recognize that the - * namespace is "deleted". When the last namespaceName object - * in any byte code code unit that refers to the namespace has - * been freed (i.e., when the namespace's refCount is 0), the - * namespace's storage will be freed. + * namespace and no call frames still refer to it. Its variables + * and command have already been destroyed. This bit allows the + * namespace resolution code to recognize that the namespace is + * "deleted". When the last namespaceName object in any byte code + * unit that refers to the namespace has been freed (i.e., when + * the namespace's refCount is 0), the namespace's storage will + * be freed. * NS_KILLED 1 means that TclTeardownNamespace has already been called on * this namespace and it should not be called again [Bug 1355942] */ #define NS_DYING 0x01 #define NS_DEAD 0x02 -#define NS_KILLED 0x04 +#define NS_KILLED 0x04 /* - * Flag passed to TclGetNamespaceForQualName to have it create all namespace - * components of a namespace-qualified name that cannot be found. The new - * namespaces are created within their specified parent. Note that this - * flag's value must not conflict with the values of the flags - * TCL_GLOBAL_ONLY, TCL_NAMESPACE_ONLY, and FIND_ONLY_NS (defined in - * tclNamesp.c). + * Flags passed to TclGetNamespaceForQualName: + * + * TCL_GLOBAL_ONLY - (see tcl.h) Look only in the global ns. + * TCL_NAMESPACE_ONLY - (see tcl.h) Look only in the context ns. + * TCL_CREATE_NS_IF_UNKNOWN - Create unknown namespaces. + * TCL_FIND_ONLY_NS - The name sought is a namespace name. */ -#define CREATE_NS_IF_UNKNOWN 0x800 +#define TCL_CREATE_NS_IF_UNKNOWN 0x800 +#define TCL_FIND_ONLY_NS 0x1000 + +/* + * The data cached in an ensemble subcommand's Tcl_Obj rep (reference in + * twoPtrValue.ptr1 field). This structure is not shared between Tcl_Objs + * referring to the same subcommand, even where one is a duplicate of another. + */ + +typedef struct { + Namespace *nsPtr; /* The namespace backing the ensemble which + * this is a subcommand of. */ + int epoch; /* Used to confirm when the data in this + * really structure matches up with the + * ensemble. */ + Tcl_Command token; /* Reference to the comamnd for which this + * structure is a cache of the resolution. */ + char *fullSubcmdName; /* The full (local) name of the subcommand, + * allocated with ckalloc(). */ + Tcl_Obj *realPrefixObj; /* Object containing the prefix words of the + * command that implements this ensemble + * subcommand. */ +} EnsembleCmdRep; + +/* + * Flag to enable bytecode compilation of an ensemble. + */ + +#define ENSEMBLE_COMPILE 0x4 /* *---------------------------------------------------------------- - * Data structures related to variables. These are used primarily - * in tclVar.c + * Data structures related to variables. These are used primarily in tclVar.c *---------------------------------------------------------------- */ /* - * The following structure defines a variable trace, which is used to - * invoke a specific C procedure whenever certain operations are performed - * on a variable. + * The following structure defines a variable trace, which is used to invoke a + * specific C procedure whenever certain operations are performed on a + * variable. */ typedef struct VarTrace { - Tcl_VarTraceProc *traceProc;/* Procedure to call when operations given - * by flags are performed on variable. */ + Tcl_VarTraceProc *traceProc;/* Procedure to call when operations given by + * flags are performed on variable. */ ClientData clientData; /* Argument to pass to proc. */ int flags; /* What events the trace procedure is - * interested in: OR-ed combination of + * interested in: OR-ed combination of * TCL_TRACE_READS, TCL_TRACE_WRITES, * TCL_TRACE_UNSETS and TCL_TRACE_ARRAY. */ - struct VarTrace *nextPtr; /* Next in list of traces associated with - * a particular variable. */ + struct VarTrace *nextPtr; /* Next in list of traces associated with a + * particular variable. */ } VarTrace; /* - * The following structure defines a command trace, which is used to - * invoke a specific C procedure whenever certain operations are performed - * on a command. + * The following structure defines a command trace, which is used to invoke a + * specific C procedure whenever certain operations are performed on a + * command. */ typedef struct CommandTrace { - Tcl_CommandTraceProc *traceProc;/* Procedure to call when operations given - * by flags are performed on command. */ - ClientData clientData; /* Argument to pass to proc. */ - int flags; /* What events the trace procedure is - * interested in: OR-ed combination of - * TCL_TRACE_RENAME, TCL_TRACE_DELETE. */ - struct CommandTrace *nextPtr; /* Next in list of traces associated with - * a particular command. */ - int refCount; /* Used to ensure this structure is - * not deleted too early. Keeps track - * of how many pieces of code have - * a pointer to this structure. */ + Tcl_CommandTraceProc *traceProc; + /* Procedure to call when operations given by + * flags are performed on command. */ + ClientData clientData; /* Argument to pass to proc. */ + int flags; /* What events the trace procedure is + * interested in: OR-ed combination of + * TCL_TRACE_RENAME, TCL_TRACE_DELETE. */ + struct CommandTrace *nextPtr; + /* Next in list of traces associated with a + * particular command. */ + int refCount; /* Used to ensure this structure is not + * deleted too early. Keeps track of how many + * pieces of code have a pointer to this + * structure. */ } CommandTrace; /* - * When a command trace is active (i.e. its associated procedure is - * executing), one of the following structures is linked into a list - * associated with the command's interpreter. The information in - * the structure is needed in order for Tcl to behave reasonably - * if traces are deleted while traces are active. + * When a command trace is active (i.e. its associated procedure is executing) + * one of the following structures is linked into a list associated with the + * command's interpreter. The information in the structure is needed in order + * for Tcl to behave reasonably if traces are deleted while traces are active. */ typedef struct ActiveCommandTrace { struct Command *cmdPtr; /* Command that's being traced. */ struct ActiveCommandTrace *nextPtr; - /* Next in list of all active command - * traces for the interpreter, or NULL - * if no more. */ - CommandTrace *nextTracePtr; /* Next trace to check after current - * trace procedure returns; if this - * trace gets deleted, must update pointer - * to avoid using free'd memory. */ - int reverseScan; /* Boolean set true when the traces - * are scanning in reverse order. */ + /* Next in list of all active command traces + * for the interpreter, or NULL if no more. */ + CommandTrace *nextTracePtr; /* Next trace to check after current trace + * procedure returns; if this trace gets + * deleted, must update pointer to avoid using + * free'd memory. */ + int reverseScan; /* Boolean set true when traces are scanning + * in reverse order. */ } ActiveCommandTrace; /* * When a variable trace is active (i.e. its associated procedure is - * executing), one of the following structures is linked into a list - * associated with the variable's interpreter. The information in - * the structure is needed in order for Tcl to behave reasonably - * if traces are deleted while traces are active. + * executing) one of the following structures is linked into a list associated + * with the variable's interpreter. The information in the structure is needed + * in order for Tcl to behave reasonably if traces are deleted while traces + * are active. */ typedef struct ActiveVarTrace { struct Var *varPtr; /* Variable that's being traced. */ struct ActiveVarTrace *nextPtr; - /* Next in list of all active variable - * traces for the interpreter, or NULL - * if no more. */ - VarTrace *nextTracePtr; /* Next trace to check after current - * trace procedure returns; if this - * trace gets deleted, must update pointer - * to avoid using free'd memory. */ + /* Next in list of all active variable traces + * for the interpreter, or NULL if no more. */ + VarTrace *nextTracePtr; /* Next trace to check after current trace + * procedure returns; if this trace gets + * deleted, must update pointer to avoid using + * free'd memory. */ } ActiveVarTrace; /* - * The following structure describes an enumerative search in progress on - * an array variable; this are invoked with options to the "array" - * command. - */ - -typedef struct ArraySearch { - int id; /* Integer id used to distinguish among - * multiple concurrent searches for the - * same array. */ - struct Var *varPtr; /* Pointer to array variable that's being - * searched. */ - Tcl_HashSearch search; /* Info kept by the hash module about - * progress through the array. */ - Tcl_HashEntry *nextEntry; /* Non-null means this is the next element - * to be enumerated (it's leftover from - * the Tcl_FirstHashEntry call or from - * an "array anymore" command). NULL - * means must call Tcl_NextHashEntry - * to get value to return. */ - struct ArraySearch *nextPtr;/* Next in list of all active searches - * for this variable, or NULL if this is - * the last one. */ -} ArraySearch; - -/* - * The structure below defines a variable, which associates a string name - * with a Tcl_Obj value. These structures are kept in procedure call frames - * (for local variables recognized by the compiler) or in the heap (for - * global variables and any variable not known to the compiler). For each - * Var structure in the heap, a hash table entry holds the variable name and - * a pointer to the Var structure. + * The structure below defines a variable, which associates a string name with + * a Tcl_Obj value. These structures are kept in procedure call frames (for + * local variables recognized by the compiler) or in the heap (for global + * variables and any variable not known to the compiler). For each Var + * structure in the heap, a hash table entry holds the variable name and a + * pointer to the Var structure. */ typedef struct Var { + int flags; /* Miscellaneous bits of information about + * variable. See below for definitions. */ union { - Tcl_Obj *objPtr; /* The variable's object value. Used for + Tcl_Obj *objPtr; /* The variable's object value. Used for * scalar variables and array elements. */ - Tcl_HashTable *tablePtr;/* For array variables, this points to - * information about the hash table used - * to implement the associative array. - * Points to malloc-ed data. */ - struct Var *linkPtr; /* If this is a global variable being - * referred to in a procedure, or a variable - * created by "upvar", this field points to - * the referenced variable's Var struct. */ + TclVarHashTable *tablePtr;/* For array variables, this points to + * information about the hash table used to + * implement the associative array. Points to + * ckalloc-ed data. */ + struct Var *linkPtr; /* If this is a global variable being referred + * to in a procedure, or a variable created by + * "upvar", this field points to the + * referenced variable's Var struct. */ } value; - char *name; /* NULL if the variable is in a hashtable, - * otherwise points to the variable's - * name. It is used, e.g., by TclLookupVar - * and "info locals". The storage for the - * characters of the name is not owned by - * the Var and must not be freed when - * freeing the Var. */ - Namespace *nsPtr; /* Points to the namespace that contains - * this variable or NULL if the variable is - * a local variable in a Tcl procedure. */ - Tcl_HashEntry *hPtr; /* If variable is in a hashtable, either the - * hash table entry that refers to this - * variable or NULL if the variable has been - * detached from its hash table (e.g. an - * array is deleted, but some of its - * elements are still referred to in - * upvars). NULL if the variable is not in a - * hashtable. This is used to delete an - * variable from its hashtable if it is no - * longer needed. */ - int refCount; /* Counts number of active uses of this - * variable, not including its entry in the - * call frame or the hash table: 1 for each - * additional variable whose linkPtr points - * here, 1 for each nested trace active on - * variable, and 1 if the variable is a - * namespace variable. This record can't be - * deleted until refCount becomes 0. */ - VarTrace *tracePtr; /* First in list of all traces set for this - * variable. */ - ArraySearch *searchPtr; /* First in list of all searches active - * for this variable, or NULL if none. */ - int flags; /* Miscellaneous bits of information about - * variable. See below for definitions. */ } Var; -/* - * Flag bits for variables. The first three (VAR_SCALAR, VAR_ARRAY, and - * VAR_LINK) are mutually exclusive and give the "type" of the variable. - * VAR_UNDEFINED is independent of the variable's type. +typedef struct VarInHash { + Var var; + int refCount; /* Counts number of active uses of this + * variable: 1 for the entry in the hash + * table, 1 for each additional variable whose + * linkPtr points here, 1 for each nested + * trace active on variable, and 1 if the + * variable is a namespace variable. This + * record can't be deleted until refCount + * becomes 0. */ + Tcl_HashEntry entry; /* The hash table entry that refers to this + * variable. This is used to find the name of + * the variable and to delete it from its + * hashtable if it is no longer needed. It + * also holds the variable's name. */ +} VarInHash; + +/* + * Flag bits for variables. The first two (VAR_ARRAY and VAR_LINK) are + * mutually exclusive and give the "type" of the variable. If none is set, + * this is a scalar variable. + * + * VAR_ARRAY - 1 means this is an array variable rather than + * a scalar variable or link. The "tablePtr" + * field points to the array's hashtable for its + * elements. + * VAR_LINK - 1 means this Var structure contains a pointer + * to another Var structure that either has the + * real value or is itself another VAR_LINK + * pointer. Variables like this come about + * through "upvar" and "global" commands, or + * through references to variables in enclosing + * namespaces. + * + * Flags that indicate the type and status of storage; none is set for + * compiled local variables (Var structs). * - * VAR_SCALAR - 1 means this is a scalar variable and not - * an array or link. The "objPtr" field points - * to the variable's value, a Tcl object. - * VAR_ARRAY - 1 means this is an array variable rather - * than a scalar variable or link. The - * "tablePtr" field points to the array's - * hashtable for its elements. - * VAR_LINK - 1 means this Var structure contains a - * pointer to another Var structure that - * either has the real value or is itself - * another VAR_LINK pointer. Variables like - * this come about through "upvar" and "global" - * commands, or through references to variables - * in enclosing namespaces. - * VAR_UNDEFINED - 1 means that the variable is in the process - * of being deleted. An undefined variable - * logically does not exist and survives only - * while it has a trace, or if it is a global - * variable currently being used by some - * procedure. * VAR_IN_HASHTABLE - 1 means this variable is in a hashtable and - * the Var structure is malloced. 0 if it is - * a local variable that was assigned a slot - * in a procedure frame by the compiler so the - * Var storage is part of the call frame. - * VAR_TRACE_ACTIVE - 1 means that trace processing is currently - * underway for a read or write access, so - * new read or write accesses should not cause - * trace procedures to be called and the - * variable can't be deleted. + * the Var structure is malloced. 0 if it is a + * local variable that was assigned a slot in a + * procedure frame by the compiler so the Var + * storage is part of the call frame. + * VAR_DEAD_HASH 1 means that this var's entry in the hashtable + * has already been deleted. * VAR_ARRAY_ELEMENT - 1 means that this variable is an array - * element, so it is not legal for it to be - * an array itself (the VAR_ARRAY flag had - * better not be set). - * VAR_NAMESPACE_VAR - 1 means that this variable was declared - * as a namespace variable. This flag ensures - * it persists until its namespace is - * destroyed or until the variable is unset; - * it will persist even if it has not been - * initialized and is marked undefined. - * The variable's refCount is incremented to - * reflect the "reference" from its namespace. + * element, so it is not legal for it to be an + * array itself (the VAR_ARRAY flag had better + * not be set). + * VAR_NAMESPACE_VAR - 1 means that this variable was declared as a + * namespace variable. This flag ensures it + * persists until its namespace is destroyed or + * until the variable is unset; it will persist + * even if it has not been initialized and is + * marked undefined. The variable's refCount is + * incremented to reflect the "reference" from + * its namespace. + * + * Flag values relating to the variable's trace and search status. + * + * VAR_TRACED_READ + * VAR_TRACED_WRITE + * VAR_TRACED_UNSET + * VAR_TRACED_ARRAY + * VAR_TRACE_ACTIVE - 1 means that trace processing is currently + * underway for a read or write access, so new + * read or write accesses should not cause trace + * procedures to be called and the variable can't + * be deleted. + * VAR_SEARCH_ACTIVE * - * The following additional flags are used with the CompiledLocal type - * defined below: + * The following additional flags are used with the CompiledLocal type defined + * below: * * VAR_ARGUMENT - 1 means that this variable holds a procedure - * argument. + * argument. * VAR_TEMPORARY - 1 if the local variable is an anonymous * temporary variable. Temporaries have a NULL * name. * VAR_RESOLVED - 1 if name resolution has been done for this * variable. + * VAR_IS_ARGS 1 if this variable is the last argument and is + * named "args". */ -#define VAR_SCALAR 0x1 -#define VAR_ARRAY 0x2 -#define VAR_LINK 0x4 -#define VAR_UNDEFINED 0x8 -#define VAR_IN_HASHTABLE 0x10 -#define VAR_TRACE_ACTIVE 0x20 -#define VAR_ARRAY_ELEMENT 0x40 -#define VAR_NAMESPACE_VAR 0x80 +/* + * FLAGS RENUMBERED: everything breaks already, make things simpler. + * + * IMPORTANT: skip the values 0x10, 0x20, 0x40, 0x800 corresponding to + * TCL_TRACE_(READS/WRITES/UNSETS/ARRAY): makes code simpler in tclTrace.c + * + * Keep the flag values for VAR_ARGUMENT and VAR_TEMPORARY so that old values + * in precompiled scripts keep working. + */ + +/* Type of value (0 is scalar) */ +#define VAR_ARRAY 0x1 +#define VAR_LINK 0x2 + +/* Type of storage (0 is compiled local) */ +#define VAR_IN_HASHTABLE 0x4 +#define VAR_DEAD_HASH 0x8 +#define VAR_ARRAY_ELEMENT 0x1000 +#define VAR_NAMESPACE_VAR 0x80 /* KEEP OLD VALUE for Itcl */ + +#define VAR_ALL_HASH \ + (VAR_IN_HASHTABLE|VAR_DEAD_HASH|VAR_NAMESPACE_VAR|VAR_ARRAY_ELEMENT) + +/* Trace and search state. */ -#define VAR_ARGUMENT 0x100 -#define VAR_TEMPORARY 0x200 -#define VAR_RESOLVED 0x400 +#define VAR_TRACED_READ 0x10 /* TCL_TRACE_READS */ +#define VAR_TRACED_WRITE 0x20 /* TCL_TRACE_WRITES */ +#define VAR_TRACED_UNSET 0x40 /* TCL_TRACE_UNSETS */ +#define VAR_TRACED_ARRAY 0x800 /* TCL_TRACE_ARRAY */ +#define VAR_TRACE_ACTIVE 0x2000 +#define VAR_SEARCH_ACTIVE 0x4000 +#define VAR_ALL_TRACES \ + (VAR_TRACED_READ|VAR_TRACED_WRITE|VAR_TRACED_ARRAY|VAR_TRACED_UNSET) + +/* Special handling on initialisation (only CompiledLocal). */ +#define VAR_ARGUMENT 0x100 /* KEEP OLD VALUE! See tclProc.c */ +#define VAR_TEMPORARY 0x200 /* KEEP OLD VALUE! See tclProc.c */ +#define VAR_IS_ARGS 0x400 +#define VAR_RESOLVED 0x8000 /* * Macros to ensure that various flag bits are set properly for variables. * The ANSI C "prototypes" for these macros are: * - * EXTERN void TclSetVarScalar _ANSI_ARGS_((Var *varPtr)); - * EXTERN void TclSetVarArray _ANSI_ARGS_((Var *varPtr)); - * EXTERN void TclSetVarLink _ANSI_ARGS_((Var *varPtr)); - * EXTERN void TclSetVarArrayElement _ANSI_ARGS_((Var *varPtr)); - * EXTERN void TclSetVarUndefined _ANSI_ARGS_((Var *varPtr)); - * EXTERN void TclClearVarUndefined _ANSI_ARGS_((Var *varPtr)); + * MODULE_SCOPE void TclSetVarScalar(Var *varPtr); + * MODULE_SCOPE void TclSetVarArray(Var *varPtr); + * MODULE_SCOPE void TclSetVarLink(Var *varPtr); + * MODULE_SCOPE void TclSetVarArrayElement(Var *varPtr); + * MODULE_SCOPE void TclSetVarUndefined(Var *varPtr); + * MODULE_SCOPE void TclClearVarUndefined(Var *varPtr); */ #define TclSetVarScalar(varPtr) \ - (varPtr)->flags = ((varPtr)->flags & ~(VAR_ARRAY|VAR_LINK)) | VAR_SCALAR + (varPtr)->flags &= ~(VAR_ARRAY|VAR_LINK) #define TclSetVarArray(varPtr) \ - (varPtr)->flags = ((varPtr)->flags & ~(VAR_SCALAR|VAR_LINK)) | VAR_ARRAY + (varPtr)->flags = ((varPtr)->flags & ~VAR_LINK) | VAR_ARRAY #define TclSetVarLink(varPtr) \ - (varPtr)->flags = ((varPtr)->flags & ~(VAR_SCALAR|VAR_ARRAY)) | VAR_LINK + (varPtr)->flags = ((varPtr)->flags & ~VAR_ARRAY) | VAR_LINK #define TclSetVarArrayElement(varPtr) \ (varPtr)->flags = ((varPtr)->flags & ~VAR_ARRAY) | VAR_ARRAY_ELEMENT #define TclSetVarUndefined(varPtr) \ - (varPtr)->flags |= VAR_UNDEFINED + (varPtr)->flags &= ~(VAR_ARRAY|VAR_LINK);\ + (varPtr)->value.objPtr = NULL + +#define TclClearVarUndefined(varPtr) + +#define TclSetVarTraceActive(varPtr) \ + (varPtr)->flags |= VAR_TRACE_ACTIVE + +#define TclClearVarTraceActive(varPtr) \ + (varPtr)->flags &= ~VAR_TRACE_ACTIVE -#define TclClearVarUndefined(varPtr) \ - (varPtr)->flags &= ~VAR_UNDEFINED +#define TclSetVarNamespaceVar(varPtr) \ + if (!TclIsVarNamespaceVar(varPtr)) {\ + (varPtr)->flags |= VAR_NAMESPACE_VAR;\ + if (TclIsVarInHash(varPtr)) {\ + ((VarInHash *)(varPtr))->refCount++;\ + }\ + } + +#define TclClearVarNamespaceVar(varPtr) \ + if (TclIsVarNamespaceVar(varPtr)) {\ + (varPtr)->flags &= ~VAR_NAMESPACE_VAR;\ + if (TclIsVarInHash(varPtr)) {\ + ((VarInHash *)(varPtr))->refCount--;\ + }\ + } /* * Macros to read various flag bits of variables. * The ANSI C "prototypes" for these macros are: * - * EXTERN int TclIsVarScalar _ANSI_ARGS_((Var *varPtr)); - * EXTERN int TclIsVarLink _ANSI_ARGS_((Var *varPtr)); - * EXTERN int TclIsVarArray _ANSI_ARGS_((Var *varPtr)); - * EXTERN int TclIsVarUndefined _ANSI_ARGS_((Var *varPtr)); - * EXTERN int TclIsVarArrayElement _ANSI_ARGS_((Var *varPtr)); - * EXTERN int TclIsVarTemporary _ANSI_ARGS_((Var *varPtr)); - * EXTERN int TclIsVarArgument _ANSI_ARGS_((Var *varPtr)); - * EXTERN int TclIsVarResolved _ANSI_ARGS_((Var *varPtr)); - */ - + * MODULE_SCOPE int TclIsVarScalar(Var *varPtr); + * MODULE_SCOPE int TclIsVarLink(Var *varPtr); + * MODULE_SCOPE int TclIsVarArray(Var *varPtr); + * MODULE_SCOPE int TclIsVarUndefined(Var *varPtr); + * MODULE_SCOPE int TclIsVarArrayElement(Var *varPtr); + * MODULE_SCOPE int TclIsVarTemporary(Var *varPtr); + * MODULE_SCOPE int TclIsVarArgument(Var *varPtr); + * MODULE_SCOPE int TclIsVarResolved(Var *varPtr); + */ + #define TclIsVarScalar(varPtr) \ - ((varPtr)->flags & VAR_SCALAR) + !((varPtr)->flags & (VAR_ARRAY|VAR_LINK)) #define TclIsVarLink(varPtr) \ ((varPtr)->flags & VAR_LINK) @@ -586,24 +706,74 @@ typedef struct Var { ((varPtr)->flags & VAR_ARRAY) #define TclIsVarUndefined(varPtr) \ - ((varPtr)->flags & VAR_UNDEFINED) + ((varPtr)->value.objPtr == NULL) #define TclIsVarArrayElement(varPtr) \ ((varPtr)->flags & VAR_ARRAY_ELEMENT) +#define TclIsVarNamespaceVar(varPtr) \ + ((varPtr)->flags & VAR_NAMESPACE_VAR) + #define TclIsVarTemporary(varPtr) \ ((varPtr)->flags & VAR_TEMPORARY) - + #define TclIsVarArgument(varPtr) \ ((varPtr)->flags & VAR_ARGUMENT) - + #define TclIsVarResolved(varPtr) \ ((varPtr)->flags & VAR_RESOLVED) +#define TclIsVarTraceActive(varPtr) \ + ((varPtr)->flags & VAR_TRACE_ACTIVE) + +#define TclIsVarTraced(varPtr) \ + ((varPtr)->flags & VAR_ALL_TRACES) + +#define TclIsVarInHash(varPtr) \ + ((varPtr)->flags & VAR_IN_HASHTABLE) + +#define TclIsVarDeadHash(varPtr) \ + ((varPtr)->flags & VAR_DEAD_HASH) + +#define TclGetVarNsPtr(varPtr) \ + (TclIsVarInHash(varPtr) \ + ? ((TclVarHashTable *) ((((VarInHash *) (varPtr))->entry.tablePtr)))->nsPtr \ + : NULL) + +#define VarHashRefCount(varPtr) \ + ((VarInHash *) (varPtr))->refCount + +/* + * Macros for direct variable access by TEBC. + */ + +#define TclIsVarDirectReadable(varPtr) \ + ( !((varPtr)->flags & (VAR_ARRAY|VAR_LINK|VAR_TRACED_READ)) \ + && (varPtr)->value.objPtr) + +#define TclIsVarDirectWritable(varPtr) \ + !((varPtr)->flags & (VAR_ARRAY|VAR_LINK|VAR_TRACED_WRITE|VAR_DEAD_HASH)) + +#define TclIsVarDirectModifyable(varPtr) \ + ( !((varPtr)->flags & (VAR_ARRAY|VAR_LINK|VAR_TRACED_READ|VAR_TRACED_WRITE)) \ + && (varPtr)->value.objPtr) + +#define TclIsVarDirectReadable2(varPtr, arrayPtr) \ + (TclIsVarDirectReadable(varPtr) &&\ + (!(arrayPtr) || !((arrayPtr)->flags & VAR_TRACED_READ))) + +#define TclIsVarDirectWritable2(varPtr, arrayPtr) \ + (TclIsVarDirectWritable(varPtr) &&\ + (!(arrayPtr) || !((arrayPtr)->flags & VAR_TRACED_WRITE))) + +#define TclIsVarDirectModifyable2(varPtr, arrayPtr) \ + (TclIsVarDirectModifyable(varPtr) &&\ + (!(arrayPtr) || !((arrayPtr)->flags & (VAR_TRACED_READ|VAR_TRACED_WRITE)))) + /* *---------------------------------------------------------------- - * Data structures related to procedures. These are used primarily - * in tclProc.c, tclCompile.c, and tclExecute.c. + * Data structures related to procedures. These are used primarily in + * tclProc.c, tclCompile.c, and tclExecute.c. *---------------------------------------------------------------- */ @@ -616,32 +786,31 @@ struct Command; /* * The variable-length structure below describes a local variable of a - * procedure that was recognized by the compiler. These variables have a - * name, an element in the array of compiler-assigned local variables in the + * procedure that was recognized by the compiler. These variables have a name, + * an element in the array of compiler-assigned local variables in the * procedure's call frame, and various other items of information. If the - * local variable is a formal argument, it may also have a default value. - * The compiler can't recognize local variables whose names are - * expressions (these names are only known at runtime when the expressions - * are evaluated) or local variables that are created as a result of an - * "upvar" or "uplevel" command. These other local variables are kept - * separately in a hash table in the call frame. + * local variable is a formal argument, it may also have a default value. The + * compiler can't recognize local variables whose names are expressions (these + * names are only known at runtime when the expressions are evaluated) or + * local variables that are created as a result of an "upvar" or "uplevel" + * command. These other local variables are kept separately in a hash table in + * the call frame. */ typedef struct CompiledLocal { struct CompiledLocal *nextPtr; - /* Next compiler-recognized local variable - * for this procedure, or NULL if this is - * the last local. */ + /* Next compiler-recognized local variable for + * this procedure, or NULL if this is the last + * local. */ int nameLength; /* The number of characters in local - * variable's name. Used to speed up - * variable lookups. */ + * variable's name. Used to speed up variable + * lookups. */ int frameIndex; /* Index in the array of compiler-assigned * variables in the procedure call frame. */ int flags; /* Flag bits for the local variable. Same as * the flags for the Var structure above, - * although only VAR_SCALAR, VAR_ARRAY, - * VAR_LINK, VAR_ARGUMENT, VAR_TEMPORARY, and - * VAR_RESOLVED make sense. */ + * although only VAR_ARGUMENT, VAR_TEMPORARY, + * and VAR_RESOLVED make sense. */ Tcl_Obj *defValuePtr; /* Pointer to the default value of an * argument, if any. NULL if not an argument * or, if an argument, no default value. */ @@ -649,277 +818,306 @@ typedef struct CompiledLocal { /* Customized variable resolution info * supplied by the Tcl_ResolveCompiledVarProc * associated with a namespace. Each variable - * is marked by a unique ClientData tag - * during compilation, and that same tag - * is used to find the variable at runtime. */ - char name[4]; /* Name of the local variable starts here. - * If the name is NULL, this will just be - * '\0'. The actual size of this field will - * be large enough to hold the name. MUST - * BE THE LAST FIELD IN THE STRUCTURE! */ + * is marked by a unique ClientData tag during + * compilation, and that same tag is used to + * find the variable at runtime. */ + char name[4]; /* Name of the local variable starts here. If + * the name is NULL, this will just be '\0'. + * The actual size of this field will be large + * enough to hold the name. MUST BE THE LAST + * FIELD IN THE STRUCTURE! */ } CompiledLocal; /* * The structure below defines a command procedure, which consists of a - * collection of Tcl commands plus information about arguments and other - * local variables recognized at compile time. + * collection of Tcl commands plus information about arguments and other local + * variables recognized at compile time. */ typedef struct Proc { - struct Interp *iPtr; /* Interpreter for which this command - * is defined. */ - int refCount; /* Reference count: 1 if still present - * in command table plus 1 for each call - * to the procedure that is currently - * active. This structure can be freed - * when refCount becomes zero. */ - struct Command *cmdPtr; /* Points to the Command structure for - * this procedure. This is used to get - * the namespace in which to execute - * the procedure. */ - Tcl_Obj *bodyPtr; /* Points to the ByteCode object for - * procedure's body command. */ - int numArgs; /* Number of formal parameters. */ - int numCompiledLocals; /* Count of local variables recognized by - * the compiler including arguments and - * temporaries. */ - CompiledLocal *firstLocalPtr; /* Pointer to first of the procedure's - * compiler-allocated local variables, or - * NULL if none. The first numArgs entries - * in this list describe the procedure's - * formal arguments. */ - CompiledLocal *lastLocalPtr; /* Pointer to the last allocated local - * variable or NULL if none. This has - * frame index (numCompiledLocals-1). */ + struct Interp *iPtr; /* Interpreter for which this command is + * defined. */ + int refCount; /* Reference count: 1 if still present in + * command table plus 1 for each call to the + * procedure that is currently active. This + * structure can be freed when refCount + * becomes zero. */ + struct Command *cmdPtr; /* Points to the Command structure for this + * procedure. This is used to get the + * namespace in which to execute the + * procedure. */ + Tcl_Obj *bodyPtr; /* Points to the ByteCode object for + * procedure's body command. */ + int numArgs; /* Number of formal parameters. */ + int numCompiledLocals; /* Count of local variables recognized by the + * compiler including arguments and + * temporaries. */ + CompiledLocal *firstLocalPtr; + /* Pointer to first of the procedure's + * compiler-allocated local variables, or NULL + * if none. The first numArgs entries in this + * list describe the procedure's formal + * arguments. */ + CompiledLocal *lastLocalPtr;/* Pointer to the last allocated local + * variable or NULL if none. This has frame + * index (numCompiledLocals-1). */ } Proc; /* - * The structure below defines a command trace. This is used to allow Tcl + * The type of functions called to process errors found during the execution + * of a procedure (or lambda term or ...). + */ + +typedef void (*ProcErrorProc)(Tcl_Interp *interp, Tcl_Obj *procNameObj); + +/* + * The structure below defines a command trace. This is used to allow Tcl * clients to find out whenever a command is about to be executed. */ typedef struct Trace { - int level; /* Only trace commands at nesting level - * less than or equal to this. */ + int level; /* Only trace commands at nesting level less + * than or equal to this. */ Tcl_CmdObjTraceProc *proc; /* Procedure to call to trace command. */ ClientData clientData; /* Arbitrary value to pass to proc. */ struct Trace *nextPtr; /* Next in list of traces for this interp. */ int flags; /* Flags governing the trace - see - * Tcl_CreateObjTrace for details */ - Tcl_CmdObjTraceDeleteProc* delProc; - /* Procedure to call when trace is deleted */ + * Tcl_CreateObjTrace for details. */ + Tcl_CmdObjTraceDeleteProc *delProc; + /* Procedure to call when trace is deleted. */ } Trace; /* - * When an interpreter trace is active (i.e. its associated procedure - * is executing), one of the following structures is linked into a list - * associated with the interpreter. The information in the structure - * is needed in order for Tcl to behave reasonably if traces are - * deleted while traces are active. + * When an interpreter trace is active (i.e. its associated procedure is + * executing), one of the following structures is linked into a list + * associated with the interpreter. The information in the structure is needed + * in order for Tcl to behave reasonably if traces are deleted while traces + * are active. */ typedef struct ActiveInterpTrace { struct ActiveInterpTrace *nextPtr; - /* Next in list of all active command - * traces for the interpreter, or NULL - * if no more. */ - Trace *nextTracePtr; /* Next trace to check after current - * trace procedure returns; if this - * trace gets deleted, must update pointer - * to avoid using free'd memory. */ - int reverseScan; /* Boolean set true when the traces - * are scanning in reverse order. */ + /* Next in list of all active command traces + * for the interpreter, or NULL if no more. */ + Trace *nextTracePtr; /* Next trace to check after current trace + * procedure returns; if this trace gets + * deleted, must update pointer to avoid using + * free'd memory. */ + int reverseScan; /* Boolean set true when traces are scanning + * in reverse order. */ } ActiveInterpTrace; /* - * The structure below defines an entry in the assocData hash table which - * is associated with an interpreter. The entry contains a pointer to a - * function to call when the interpreter is deleted, and a pointer to - * a user-defined piece of data. + * Flag values designating types of execution traces. See tclTrace.c for + * related flag values. + * + * TCL_TRACE_ENTER_EXEC - triggers enter/enterstep traces. + * - passed to Tcl_CreateObjTrace to set up + * "enterstep" traces. + * TCL_TRACE_LEAVE_EXEC - triggers leave/leavestep traces. + * - passed to Tcl_CreateObjTrace to set up + * "leavestep" traces. + */ + +#define TCL_TRACE_ENTER_EXEC 1 +#define TCL_TRACE_LEAVE_EXEC 2 + +/* + * The structure below defines an entry in the assocData hash table which is + * associated with an interpreter. The entry contains a pointer to a function + * to call when the interpreter is deleted, and a pointer to a user-defined + * piece of data. */ typedef struct AssocData { Tcl_InterpDeleteProc *proc; /* Proc to call when deleting. */ ClientData clientData; /* Value to pass to proc. */ -} AssocData; +} AssocData; /* * The structure below defines a call frame. A call frame defines a naming - * context for a procedure call: its local naming scope (for local - * variables) and its global naming scope (a namespace, perhaps the global - * :: namespace). A call frame can also define the naming context for a - * namespace eval or namespace inscope command: the namespace in which the - * command's code should execute. The Tcl_CallFrame structures exist only - * while procedures or namespace eval/inscope's are being executed, and - * provide a kind of Tcl call stack. - * + * context for a procedure call: its local naming scope (for local variables) + * and its global naming scope (a namespace, perhaps the global :: namespace). + * A call frame can also define the naming context for a namespace eval or + * namespace inscope command: the namespace in which the command's code should + * execute. The Tcl_CallFrame structures exist only while procedures or + * namespace eval/inscope's are being executed, and provide a kind of Tcl call + * stack. + * * WARNING!! The structure definition must be kept consistent with the * Tcl_CallFrame structure in tcl.h. If you change one, change the other. */ +/* + * Will be grown to contain: pointers to the varnames (allocated at the end), + * plus the init values for each variable (suitable to be memcopied on init) + */ + +typedef struct LocalCache { + int refCount; + int numVars; + Tcl_Obj *varName0; +} LocalCache; + +#define localName(framePtr, i) \ + ((&((framePtr)->localCachePtr->varName0))[(i)]) + +MODULE_SCOPE void TclFreeLocalCache(Tcl_Interp *interp, + LocalCache *localCachePtr); + typedef struct CallFrame { Namespace *nsPtr; /* Points to the namespace used to resolve * commands and global variables. */ - int isProcCallFrame; /* If nonzero, the frame was pushed to - * execute a Tcl procedure and may have - * local vars. If 0, the frame was pushed - * to execute a namespace command and var - * references are treated as references to - * namespace vars; varTablePtr and - * compiledLocals are ignored. */ - int objc; /* This and objv below describe the - * arguments for this procedure call. */ - Tcl_Obj *CONST *objv; /* Array of argument objects. */ + int isProcCallFrame; /* If 0, the frame was pushed to execute a + * namespace command and var references are + * treated as references to namespace vars; + * varTablePtr and compiledLocals are ignored. + * If FRAME_IS_PROC is set, the frame was + * pushed to execute a Tcl procedure and may + * have local vars. */ + int objc; /* This and objv below describe the arguments + * for this procedure call. */ + Tcl_Obj *const *objv; /* Array of argument objects. */ struct CallFrame *callerPtr; /* Value of interp->framePtr when this - * procedure was invoked (i.e. next higher - * in stack of all active procedures). */ + * procedure was invoked (i.e. next higher in + * stack of all active procedures). */ struct CallFrame *callerVarPtr; /* Value of interp->varFramePtr when this * procedure was invoked (i.e. determines - * variable scoping within caller). Same - * as callerPtr unless an "uplevel" command - * or something equivalent was active in - * the caller). */ + * variable scoping within caller). Same as + * callerPtr unless an "uplevel" command or + * something equivalent was active in the + * caller). */ int level; /* Level of this procedure, for "uplevel" * purposes (i.e. corresponds to nesting of * callerVarPtr's, not callerPtr's). 1 for * outermost procedure, 0 for top-level. */ - Proc *procPtr; /* Points to the structure defining the - * called procedure. Used to get information - * such as the number of compiled local - * variables (local variables assigned - * entries ["slots"] in the compiledLocals - * array below). */ - Tcl_HashTable *varTablePtr; /* Hash table containing local variables not + Proc *procPtr; /* Points to the structure defining the called + * procedure. Used to get information such as + * the number of compiled local variables + * (local variables assigned entries ["slots"] + * in the compiledLocals array below). */ + TclVarHashTable *varTablePtr; + /* Hash table containing local variables not * recognized by the compiler, or created at * execution time through, e.g., upvar. * Initially NULL and created if needed. */ - int numCompiledLocals; /* Count of local variables recognized by - * the compiler including arguments. */ - Var* compiledLocals; /* Points to the array of local variables + int numCompiledLocals; /* Count of local variables recognized by the + * compiler including arguments. */ + Var *compiledLocals; /* Points to the array of local variables * recognized by the compiler. The compiler * emits code that refers to these variables * using an index into this array. */ + ClientData clientData; /* Pointer to some context that is used by + * object systems. The meaning of the contents + * of this field is defined by the code that + * sets it, and it should only ever be set by + * the code that is pushing the frame. In that + * case, the code that sets it should also + * have some means of discovering what the + * meaning of the value is, which we do not + * specify. */ + LocalCache *localCachePtr; } CallFrame; -#ifdef TCL_TIP280 +#define FRAME_IS_PROC 0x1 +#define FRAME_IS_LAMBDA 0x2 + /* * TIP #280 - * The structure below defines a command frame. A command frame - * provides location information for all commands executing a tcl - * script (source, eval, uplevel, procedure bodies, ...). The runtime - * structure essentially contains the stack trace as it would be if - * the currently executing command were to throw an error. + * The structure below defines a command frame. A command frame provides + * location information for all commands executing a tcl script (source, eval, + * uplevel, procedure bodies, ...). The runtime structure essentially contains + * the stack trace as it would be if the currently executing command were to + * throw an error. * - * For commands where it makes sense it refers to the associated - * CallFrame as well. + * For commands where it makes sense it refers to the associated CallFrame as + * well. * - * The structures are chained in a single list, with the top of the - * stack anchored in the Interp structure. + * The structures are chained in a single list, with the top of the stack + * anchored in the Interp structure. * - * Instances can be allocated on the C stack, or the heap, the former - * making cleanup a bit simpler. + * Instances can be allocated on the C stack, or the heap, the former making + * cleanup a bit simpler. */ typedef struct CmdFrame { - /* General data. Always available. */ - - int type; /* Values see below */ - int level; /* #Frames in stack, prevent O(n) scan of list */ - int* line; /* Lines the words of the command start on */ - int nline; - - CallFrame* framePtr; /* Procedure activation record, may be NULL */ - struct CmdFrame* nextPtr; /* Link to calling frame */ - - /* Data needed for Eval vs TEBC - * - * EXECUTION CONTEXTS and usage of CmdFrame - * - * Field TEBC EvalEx EvalObjEx - * ======= ==== ====== ========= - * level yes yes yes - * type BC/PREBC SRC/EVAL EVAL_LIST - * line0 yes yes yes - * framePtr yes yes yes - * ======= ==== ====== ========= - * - * ======= ==== ====== ========= union data - * line1 - yes - - * line3 - yes - - * path - yes - - * ------- ---- ------ --------- - * codePtr yes - - - * pc yes - - - * ======= ==== ====== ========= - * - * ======= ==== ====== ========= | union cmd - * listPtr - - yes | - * ------- ---- ------ --------- | - * cmd yes yes - | - * cmdlen yes yes - | - * ------- ---- ------ --------- | - */ - - union { - struct { - Tcl_Obj* path; /* Path of the sourced file the command - * is in. */ - } eval; - struct { - CONST void* codePtr; /* Byte code currently executed */ - CONST char* pc; /* and instruction pointer. */ - } tebc; - } data; + /* + * General data. Always available. + */ - union { - struct { - CONST char* cmd; /* The executed command, if possible */ - int len; /* And its length */ - } str; - Tcl_Obj* listPtr; /* Tcl_EvalObjEx, cmd list */ - } cmd; + int type; /* Values see below. */ + int level; /* Number of frames in stack, prevent O(n) + * scan of list. */ + int *line; /* Lines the words of the command start on. */ + int nline; + CallFrame *framePtr; /* Procedure activation record, may be + * NULL. */ + struct CmdFrame *nextPtr; /* Link to calling frame. */ + /* + * Data needed for Eval vs TEBC + * + * EXECUTION CONTEXTS and usage of CmdFrame + * + * Field TEBC EvalEx EvalObjEx + * ======= ==== ====== ========= + * level yes yes yes + * type BC/PREBC SRC/EVAL EVAL_LIST + * line0 yes yes yes + * framePtr yes yes yes + * ======= ==== ====== ========= + * + * ======= ==== ====== ========= union data + * line1 - yes - + * line3 - yes - + * path - yes - + * ------- ---- ------ --------- + * codePtr yes - - + * pc yes - - + * ======= ==== ====== ========= + * + * ======= ==== ====== ========= | union cmd + * listPtr - - yes | + * ------- ---- ------ --------- | + * cmd yes yes - | + * cmdlen yes yes - | + * ------- ---- ------ --------- | + */ + union { + struct { + Tcl_Obj *path; /* Path of the sourced file the command is + * in. */ + } eval; + struct { + const void *codePtr;/* Byte code currently executed... */ + const char *pc; /* ... and instruction pointer. */ + } tebc; + } data; + union { + struct { + const char *cmd; /* The executed command, if possible... */ + int len; /* ... and its length. */ + } str; + Tcl_Obj *listPtr; /* Tcl_EvalObjEx, cmd list. */ + } cmd; } CmdFrame; -/* The following macros define the allowed values for the type field - * of the CmdFrame structure above. Some of the values occur only in - * the extended location data referenced via the 'baseLocPtr'. - * - * TCL_LOCATION_EVAL : Frame is for a script evaluated by EvalEx. - * TCL_LOCATION_EVAL_LIST : Frame is for a script evaluated by the list - * optimization path of EvalObjEx. - * TCL_LOCATION_BC : Frame is for bytecode. - * TCL_LOCATION_PREBC : Frame is for precompiled bytecode. - * TCL_LOCATION_SOURCE : Frame is for a script evaluated by EvalEx, - * from a sourced file. - * TCL_LOCATION_PROC : Frame is for bytecode of a procedure. - * - * A TCL_LOCATION_BC type in a frame can be overridden by _SOURCE and - * _PROC types, per the context of the byte code in execution. - */ - -#define TCL_LOCATION_EVAL (0) /* Location in a dynamic eval script */ -#define TCL_LOCATION_EVAL_LIST (1) /* Location in a dynamic eval script, list-path */ -#define TCL_LOCATION_BC (2) /* Location in byte code */ -#define TCL_LOCATION_PREBC (3) /* Location in precompiled byte code, no location */ -#define TCL_LOCATION_SOURCE (4) /* Location in a file */ -#define TCL_LOCATION_PROC (5) /* Location in a dynamic proc */ - -#define TCL_LOCATION_LAST (6) /* Number of values in the enum */ - typedef struct CFWord { - CmdFrame* framePtr; /* CmdFrame to acess */ - int word; /* Index of the word in the command */ - int refCount; /* #times the word is on the stack */ + CmdFrame *framePtr; /* CmdFrame to access. */ + int word; /* Index of the word in the command. */ + int refCount; /* Number of times the word is on the + * stack. */ } CFWord; typedef struct CFWordBC { - CmdFrame* framePtr; /* CmdFrame to acess */ - int pc; /* Instruction pointer of a command in ExtCmdLoc.loc[.] */ - int word; /* Index of word in ExtCmdLoc.loc[cmd]->{line,literal}[.] */ - struct CFWordBC* prevPtr; + CmdFrame *framePtr; /* CmdFrame to access. */ + int pc; /* Instruction pointer of a command in + * ExtCmdLoc.loc[.] */ + int word; /* Index of word in + * ExtCmdLoc.loc[cmd]->line[.] */ + struct CFWordBC *prevPtr; /* Previous entry in stack for same Tcl_Obj. */ } CFWordBC; /* @@ -932,96 +1130,125 @@ typedef struct CFWordBC { * tracking. * * These structures are allocated and filled by both the function - * EvalTokensStandard() in the file "tclBasic.c" and its caller EvalEx(), and - * stored in the thread-global hashtable "lineCLPtr" in file "tclObj.c". They - * are used by the functions TclSetByteCodeFromAny() and TclCompileScript(), - * both found in the file "tclCompile.c". Their memory is released by the - * function TclFreeObj(), in the file "tclObj.c", and also by the function - * TclThreadFinalizeObjects(), in the same file. + * TclSubstTokens() in the file "tclParse.c" and its caller TclEvalEx() in the + * file "tclBasic.c", and stored in the thread-global hashtable "lineCLPtr" in + * file "tclObj.c". They are used by the functions TclSetByteCodeFromAny() and + * TclCompileScript(), both found in the file "tclCompile.c". Their memory is + * released by the function TclFreeObj(), in the file "tclObj.c", and also by + * the function TclThreadFinalizeObjects(), in the same file. */ -#define CLL_END (-1) +#define CLL_END (-1) typedef struct ContLineLoc { - int num; /* Number of entries in loc, not counting the final -1 - * marker entry */ - int loc[1]; /* Table of locations, as character offsets. The table is - * allocated as part of the structure, i.e. the loc array - * extends behind the nominal end of the structure. An entry - * containing the value CLL_END is put after the last - * location, as end-marker/sentinel. */ + int num; /* Number of entries in loc, not counting the + * final -1 marker entry. */ + int loc[1]; /* Table of locations, as character offsets. + * The table is allocated as part of the + * structure, extending behind the nominal end + * of the structure. An entry containing the + * value -1 is put after the last location, as + * end-marker/sentinel. */ } ContLineLoc; -#endif /* TCL_TIP280 */ +/* + * The following macros define the allowed values for the type field of the + * CmdFrame structure above. Some of the values occur only in the extended + * location data referenced via the 'baseLocPtr'. + * + * TCL_LOCATION_EVAL : Frame is for a script evaluated by EvalEx. + * TCL_LOCATION_EVAL_LIST : Frame is for a script evaluated by the list + * optimization path of EvalObjEx. + * TCL_LOCATION_BC : Frame is for bytecode. + * TCL_LOCATION_PREBC : Frame is for precompiled bytecode. + * TCL_LOCATION_SOURCE : Frame is for a script evaluated by EvalEx, from a + * sourced file. + * TCL_LOCATION_PROC : Frame is for bytecode of a procedure. + * + * A TCL_LOCATION_BC type in a frame can be overridden by _SOURCE and _PROC + * types, per the context of the byte code in execution. + */ + +#define TCL_LOCATION_EVAL (0) /* Location in a dynamic eval script. */ +#define TCL_LOCATION_EVAL_LIST (1) /* Location in a dynamic eval script, + * list-path. */ +#define TCL_LOCATION_BC (2) /* Location in byte code. */ +#define TCL_LOCATION_PREBC (3) /* Location in precompiled byte code, no + * location. */ +#define TCL_LOCATION_SOURCE (4) /* Location in a file. */ +#define TCL_LOCATION_PROC (5) /* Location in a dynamic proc. */ +#define TCL_LOCATION_LAST (6) /* Number of values in the enum. */ + +/* + * Structure passed to describe procedure-like "procedures" that are not + * procedures (e.g. a lambda) so that their details can be reported correctly + * by [info frame]. Contains a sub-structure for each extra field. + */ + +typedef Tcl_Obj *(*GetFrameInfoValueProc)(ClientData clientData); +typedef struct { + const char *name; /* Name of this field. */ + GetFrameInfoValueProc proc; /* Function to generate a Tcl_Obj* from the + * clientData, or just use the clientData + * directly (after casting) if NULL. */ + ClientData clientData; /* Context for above function, or Tcl_Obj* if + * proc field is NULL. */ +} ExtraFrameInfoField; +typedef struct { + int length; /* Length of array. */ + ExtraFrameInfoField fields[2]; + /* Really as long as necessary, but this is + * long enough for nearly anything. */ +} ExtraFrameInfo; /* *---------------------------------------------------------------- - * Data structures and procedures related to TclHandles, which - * are a very lightweight method of preserving enough information - * to determine if an arbitrary malloc'd block has been deleted. + * Data structures and procedures related to TclHandles, which are a very + * lightweight method of preserving enough information to determine if an + * arbitrary malloc'd block has been deleted. *---------------------------------------------------------------- */ -typedef VOID **TclHandle; +typedef void **TclHandle; /* *---------------------------------------------------------------- - * Data structures related to expressions. These are used only in - * tclExpr.c. + * Experimental flag value passed to Tcl_GetRegExpFromObj. Intended for use + * only by Expect. It will probably go away in a later release. *---------------------------------------------------------------- */ -/* - * The data structure below defines a math function (e.g. sin or hypot) - * for use in Tcl expressions. - */ - -#define MAX_MATH_ARGS 5 -typedef struct MathFunc { - int builtinFuncIndex; /* If this is a builtin math function, its - * index in the array of builtin functions. - * (tclCompilation.h lists these indices.) - * The value is -1 if this is a new function - * defined by Tcl_CreateMathFunc. The value - * is also -1 if a builtin function is - * replaced by a Tcl_CreateMathFunc call. */ - int numArgs; /* Number of arguments for function. */ - Tcl_ValueType argTypes[MAX_MATH_ARGS]; - /* Acceptable types for each argument. */ - Tcl_MathProc *proc; /* Procedure that implements this function. - * NULL if isBuiltinFunc is 1. */ - ClientData clientData; /* Additional argument to pass to the - * function when invoking it. NULL if - * isBuiltinFunc is 1. */ -} MathFunc; +#define TCL_REG_BOSONLY 002000 /* Prepend \A to pattern so it only matches at + * the beginning of the string. */ /* * These are a thin layer over TclpThreadKeyDataGet and TclpThreadKeyDataSet - * when threads are used, or an emulation if there are no threads. These - * are really internal and Tcl clients should use Tcl_GetThreadData. + * when threads are used, or an emulation if there are no threads. These are + * really internal and Tcl clients should use Tcl_GetThreadData. */ -EXTERN VOID *TclThreadDataKeyGet _ANSI_ARGS_((Tcl_ThreadDataKey *keyPtr)); -EXTERN void TclThreadDataKeySet _ANSI_ARGS_((Tcl_ThreadDataKey *keyPtr, VOID *data)); +MODULE_SCOPE void * TclThreadDataKeyGet(Tcl_ThreadDataKey *keyPtr); +MODULE_SCOPE void TclThreadDataKeySet(Tcl_ThreadDataKey *keyPtr, + void *data); /* * This is a convenience macro used to initialize a thread local storage ptr. */ -#define TCL_TSD_INIT(keyPtr) (ThreadSpecificData *)Tcl_GetThreadData((keyPtr), sizeof(ThreadSpecificData)) +#define TCL_TSD_INIT(keyPtr) \ + (ThreadSpecificData *)Tcl_GetThreadData((keyPtr), sizeof(ThreadSpecificData)) /* *---------------------------------------------------------------- - * Data structures related to bytecode compilation and execution. - * These are used primarily in tclCompile.c, tclExecute.c, and - * tclBasic.c. + * Data structures related to bytecode compilation and execution. These are + * used primarily in tclCompile.c, tclExecute.c, and tclBasic.c. *---------------------------------------------------------------- */ /* * Forward declaration to prevent errors when the forward references to - * Tcl_Parse and CompileEnv are encountered in the procedure type - * CompileProc declared below. + * Tcl_Parse and CompileEnv are encountered in the procedure type CompileProc + * declared below. */ struct CompileEnv; @@ -1029,62 +1256,72 @@ struct CompileEnv; /* * The type of procedures called by the Tcl bytecode compiler to compile * commands. Pointers to these procedures are kept in the Command structure - * describing each command. When a CompileProc returns, the interpreter's - * result is set to error information, if any. In addition, the CompileProc - * returns an integer value, which is one of the following: + * describing each command. The integer value returned by a CompileProc must + * be one of the following: * * TCL_OK Compilation completed normally. - * TCL_ERROR Compilation failed because of an error; - * the interpreter's result describes what went wrong. - * TCL_OUT_LINE_COMPILE Compilation failed because, e.g., the command is - * too complex for effective inline compilation. The - * CompileProc believes the command is legal but - * should be compiled "out of line" by emitting code - * to invoke its command procedure at runtime. + * TCL_ERROR Compilation could not be completed. This can be just a + * judgment by the CompileProc that the command is too + * complex to compile effectively, or it can indicate + * that in the current state of the interp, the command + * would raise an error. The bytecode compiler will not + * do any error reporting at compiler time. Error + * reporting is deferred until the actual runtime, + * because by then changes in the interp state may allow + * the command to be successfully evaluated. + * TCL_OUT_LINE_COMPILE A source-compatible alias for TCL_ERROR, kept for the + * sake of old code only. */ -#define TCL_OUT_LINE_COMPILE (TCL_CONTINUE + 1) +#define TCL_OUT_LINE_COMPILE TCL_ERROR -typedef int (CompileProc) _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *compEnvPtr)); +typedef int (CompileProc)(Tcl_Interp *interp, Tcl_Parse *parsePtr, + struct Command *cmdPtr, struct CompileEnv *compEnvPtr); /* * The type of procedure called from the compilation hook point in * SetByteCodeFromAny. */ -typedef int (CompileHookProc) _ANSI_ARGS_((Tcl_Interp *interp, - struct CompileEnv *compEnvPtr, ClientData clientData)); +typedef int (CompileHookProc)(Tcl_Interp *interp, + struct CompileEnv *compEnvPtr, ClientData clientData); + +/* + * The data structure for a (linked list of) execution stacks. + */ + +typedef struct ExecStack { + struct ExecStack *prevPtr; + struct ExecStack *nextPtr; + Tcl_Obj **markerPtr; + Tcl_Obj **endPtr; + Tcl_Obj **tosPtr; + Tcl_Obj *stackWords[1]; +} ExecStack; /* * The data structure defining the execution environment for ByteCode's. - * There is one ExecEnv structure per Tcl interpreter. It holds the - * evaluation stack that holds command operands and results. The stack grows - * towards increasing addresses. The "stackTop" member is cached by - * TclExecuteByteCode in a local variable: it must be set before calling - * TclExecuteByteCode and will be restored by TclExecuteByteCode before it - * returns. + * There is one ExecEnv structure per Tcl interpreter. It holds the evaluation + * stack that holds command operands and results. The stack grows towards + * increasing addresses. The member stackPtr points to the stackItems of the + * currently active execution stack. */ typedef struct ExecEnv { - Tcl_Obj **stackPtr; /* Points to the first item in the - * evaluation stack on the heap. */ - int stackTop; /* Index of current top of stack; -1 when - * the stack is empty. */ - int stackEnd; /* Index of last usable item in stack. */ - Tcl_Obj *errorInfo; - Tcl_Obj *errorCode; + ExecStack *execStackPtr; /* Points to the first item in the evaluation + * stack on the heap. */ + Tcl_Obj *constants[2]; /* Pointers to constant "0" and "1" objs. */ } ExecEnv; /* * The definitions for the LiteralTable and LiteralEntry structures. Each * interpreter contains a LiteralTable. It is used to reduce the storage * needed for all the Tcl objects that hold the literals of scripts compiled - * by the interpreter. A literal's object is shared by all the ByteCodes - * that refer to the literal. Each distinct literal has one LiteralEntry - * entry in the LiteralTable. A literal table is a specialized hash table - * that is indexed by the literal's string representation, which may contain - * null characters. + * by the interpreter. A literal's object is shared by all the ByteCodes that + * refer to the literal. Each distinct literal has one LiteralEntry entry in + * the LiteralTable. A literal table is a specialized hash table that is + * indexed by the literal's string representation, which may contain null + * characters. * * Note that we reduce the space needed for literals by sharing literal * objects both within a ByteCode (each ByteCode contains a local @@ -1093,37 +1330,36 @@ typedef struct ExecEnv { */ typedef struct LiteralEntry { - struct LiteralEntry *nextPtr; /* Points to next entry in this - * hash bucket or NULL if end of - * chain. */ - Tcl_Obj *objPtr; /* Points to Tcl object that - * holds the literal's bytes and - * length. */ - int refCount; /* If in an interpreter's global - * literal table, the number of - * ByteCode structures that share - * the literal object; the literal - * entry can be freed when refCount - * drops to 0. If in a local literal - * table, -1. */ + struct LiteralEntry *nextPtr; + /* Points to next entry in this hash bucket or + * NULL if end of chain. */ + Tcl_Obj *objPtr; /* Points to Tcl object that holds the + * literal's bytes and length. */ + int refCount; /* If in an interpreter's global literal + * table, the number of ByteCode structures + * that share the literal object; the literal + * entry can be freed when refCount drops to + * 0. If in a local literal table, -1. */ + Namespace *nsPtr; /* Namespace in which this literal is used. We + * try to avoid sharing literal non-FQ command + * names among different namespaces to reduce + * shimmering. */ } LiteralEntry; typedef struct LiteralTable { - LiteralEntry **buckets; /* Pointer to bucket array. Each - * element points to first entry in - * bucket's hash chain, or NULL. */ + LiteralEntry **buckets; /* Pointer to bucket array. Each element + * points to first entry in bucket's hash + * chain, or NULL. */ LiteralEntry *staticBuckets[TCL_SMALL_HASH_TABLE]; - /* Bucket array used for small - * tables to avoid mallocs and - * frees. */ - int numBuckets; /* Total number of buckets allocated - * at **buckets. */ - int numEntries; /* Total number of entries present - * in table. */ - int rebuildSize; /* Enlarge table when numEntries - * gets to be this large. */ - int mask; /* Mask value used in hashing - * function. */ + /* Bucket array used for small tables to avoid + * mallocs and frees. */ + int numBuckets; /* Total number of buckets allocated at + * **buckets. */ + int numEntries; /* Total number of entries present in + * table. */ + int rebuildSize; /* Enlarge table when numEntries gets to be + * this large. */ + int mask; /* Mask value used in hashing function. */ } LiteralTable; /* @@ -1134,36 +1370,49 @@ typedef struct LiteralTable { #ifdef TCL_COMPILE_STATS typedef struct ByteCodeStats { - long numExecutions; /* Number of ByteCodes executed. */ - long numCompilations; /* Number of ByteCodes created. */ - long numByteCodesFreed; /* Number of ByteCodes destroyed. */ - long instructionCount[256]; /* Number of times each instruction was - * executed. */ - - double totalSrcBytes; /* Total source bytes ever compiled. */ - double totalByteCodeBytes; /* Total bytes for all ByteCodes. */ - double currentSrcBytes; /* Src bytes for all current ByteCodes. */ - double currentByteCodeBytes; /* Code bytes in all current ByteCodes. */ - - long srcCount[32]; /* Source size distribution: # of srcs of - * size [2**(n-1)..2**n), n in [0..32). */ - long byteCodeCount[32]; /* ByteCode size distribution. */ - long lifetimeCount[32]; /* ByteCode lifetime distribution (ms). */ - - double currentInstBytes; /* Instruction bytes-current ByteCodes. */ - double currentLitBytes; /* Current literal bytes. */ - double currentExceptBytes; /* Current exception table bytes. */ - double currentAuxBytes; /* Current auxiliary information bytes. */ - double currentCmdMapBytes; /* Current src<->code map bytes. */ - - long numLiteralsCreated; /* Total literal objects ever compiled. */ - double totalLitStringBytes; /* Total string bytes in all literals. */ - double currentLitStringBytes; /* String bytes in current literals. */ - long literalCount[32]; /* Distribution of literal string sizes. */ + long numExecutions; /* Number of ByteCodes executed. */ + long numCompilations; /* Number of ByteCodes created. */ + long numByteCodesFreed; /* Number of ByteCodes destroyed. */ + long instructionCount[256]; /* Number of times each instruction was + * executed. */ + + double totalSrcBytes; /* Total source bytes ever compiled. */ + double totalByteCodeBytes; /* Total bytes for all ByteCodes. */ + double currentSrcBytes; /* Src bytes for all current ByteCodes. */ + double currentByteCodeBytes;/* Code bytes in all current ByteCodes. */ + + long srcCount[32]; /* Source size distribution: # of srcs of + * size [2**(n-1)..2**n), n in [0..32). */ + long byteCodeCount[32]; /* ByteCode size distribution. */ + long lifetimeCount[32]; /* ByteCode lifetime distribution (ms). */ + + double currentInstBytes; /* Instruction bytes-current ByteCodes. */ + double currentLitBytes; /* Current literal bytes. */ + double currentExceptBytes; /* Current exception table bytes. */ + double currentAuxBytes; /* Current auxiliary information bytes. */ + double currentCmdMapBytes; /* Current src<->code map bytes. */ + + long numLiteralsCreated; /* Total literal objects ever compiled. */ + double totalLitStringBytes; /* Total string bytes in all literals. */ + double currentLitStringBytes; + /* String bytes in current literals. */ + long literalCount[32]; /* Distribution of literal string sizes. */ } ByteCodeStats; #endif /* TCL_COMPILE_STATS */ /* + * Structure used in implementation of those core ensembles which are + * partially compiled. Used as an array of these, with a terminating field + * whose 'name' is NULL. + */ + +typedef struct { + const char *name; /* The name of the subcommand. */ + Tcl_ObjCmdProc *proc; /* The implementation of the subcommand. */ + CompileProc *compileProc; /* The compiler for the subcommand. */ +} EnsembleImplMap; + +/* *---------------------------------------------------------------- * Data structures related to commands. *---------------------------------------------------------------- @@ -1171,11 +1420,12 @@ typedef struct ByteCodeStats { /* * An imported command is created in an namespace when it imports a "real" - * command from another namespace. An imported command has a Command - * structure that points (via its ClientData value) to the "real" Command - * structure in the source namespace's command table. The real command - * records all the imported commands that refer to it in a list of ImportRef - * structures so that they can be deleted when the real command is deleted. */ + * command from another namespace. An imported command has a Command structure + * that points (via its ClientData value) to the "real" Command structure in + * the source namespace's command table. The real command records all the + * imported commands that refer to it in a list of ImportRef structures so + * that they can be deleted when the real command is deleted. + */ typedef struct ImportRef { struct Command *importedCmdPtr; @@ -1183,11 +1433,11 @@ typedef struct ImportRef { * an importing namespace; this command * redirects its invocations to the "real" * command. */ - struct ImportRef *nextPtr; /* Next element on the linked list of - * imported commands that refer to the - * "real" command. The real command deletes - * these imported commands on this list when - * it is deleted. */ + struct ImportRef *nextPtr; /* Next element on the linked list of imported + * commands that refer to the "real" command. + * The real command deletes these imported + * commands on this list when it is + * deleted. */ } ImportRef; /* @@ -1200,35 +1450,34 @@ typedef struct ImportedCmdData { struct Command *realCmdPtr; /* "Real" command that this imported command * refers to. */ struct Command *selfPtr; /* Pointer to this imported command. Needed - * only when deleting it in order to remove - * it from the real command's linked list of + * only when deleting it in order to remove it + * from the real command's linked list of * imported commands that refer to it. */ } ImportedCmdData; /* - * A Command structure exists for each command in a namespace. The - * Tcl_Command opaque type actually refers to these structures. + * A Command structure exists for each command in a namespace. The Tcl_Command + * opaque type actually refers to these structures. */ typedef struct Command { - Tcl_HashEntry *hPtr; /* Pointer to the hash table entry that - * refers to this command. The hash table is - * either a namespace's command table or an + Tcl_HashEntry *hPtr; /* Pointer to the hash table entry that refers + * to this command. The hash table is either a + * namespace's command table or an * interpreter's hidden command table. This * pointer is used to get a command's name * from its Tcl_Command handle. NULL means - * that the hash table entry has been - * removed already (this can happen if - * deleteProc causes the command to be - * deleted or recreated). */ + * that the hash table entry has been removed + * already (this can happen if deleteProc + * causes the command to be deleted or + * recreated). */ Namespace *nsPtr; /* Points to the namespace containing this * command. */ int refCount; /* 1 if in command hashtable plus 1 for each * reference from a CmdName Tcl object - * representing a command's name in a - * ByteCode instruction sequence. This - * structure can be freed when refCount - * becomes zero. */ + * representing a command's name in a ByteCode + * instruction sequence. This structure can be + * freed when refCount becomes zero. */ int cmdEpoch; /* Incremented to invalidate any references * that point to this command when it is * renamed, deleted, hidden, or exposed. */ @@ -1239,45 +1488,46 @@ typedef struct Command { Tcl_CmdProc *proc; /* String-based command procedure. */ ClientData clientData; /* Arbitrary value passed to string proc. */ Tcl_CmdDeleteProc *deleteProc; - /* Procedure invoked when deleting command - * to, e.g., free all client data. */ + /* Procedure invoked when deleting command to, + * e.g., free all client data. */ ClientData deleteData; /* Arbitrary value passed to deleteProc. */ int flags; /* Miscellaneous bits of information about * command. See below for definitions. */ ImportRef *importRefPtr; /* List of each imported Command created in * another namespace when this command is - * imported. These imported commands - * redirect invocations back to this - * command. The list is used to remove all - * those imported commands when deleting - * this "real" command. */ + * imported. These imported commands redirect + * invocations back to this command. The list + * is used to remove all those imported + * commands when deleting this "real" + * command. */ CommandTrace *tracePtr; /* First in list of all traces set for this * command. */ } Command; /* - * Flag bits for commands. + * Flag bits for commands. * - * CMD_IS_DELETED - Means that the command is in the process - * of being deleted (its deleteProc is - * currently executing). Other attempts to - * delete the command should be ignored. + * CMD_IS_DELETED - Means that the command is in the process of + * being deleted (its deleteProc is currently + * executing). Other attempts to delete the + * command should be ignored. * CMD_TRACE_ACTIVE - 1 means that trace processing is currently - * underway for a rename/delete change. - * See the two flags below for which is - * currently being processed. - * CMD_HAS_EXEC_TRACES - 1 means that this command has at least - * one execution trace (as opposed to simple - * delete/rename traces) in its tracePtr list. - * TCL_TRACE_RENAME - A rename trace is in progress. Further - * recursive renames will not be traced. - * TCL_TRACE_DELETE - A delete trace is in progress. Further - * recursive deletes will not be traced. + * underway for a rename/delete change. See the + * two flags below for which is currently being + * processed. + * CMD_HAS_EXEC_TRACES - 1 means that this command has at least one + * execution trace (as opposed to simple + * delete/rename traces) in its tracePtr list. + * TCL_TRACE_RENAME - A rename trace is in progress. Further + * recursive renames will not be traced. + * TCL_TRACE_DELETE - A delete trace is in progress. Further + * recursive deletes will not be traced. * (these last two flags are defined in tcl.h) */ -#define CMD_IS_DELETED 0x1 -#define CMD_TRACE_ACTIVE 0x2 -#define CMD_HAS_EXEC_TRACES 0x4 + +#define CMD_IS_DELETED 0x1 +#define CMD_TRACE_ACTIVE 0x2 +#define CMD_HAS_EXEC_TRACES 0x4 /* *---------------------------------------------------------------- @@ -1286,12 +1536,11 @@ typedef struct Command { */ /* - * The interpreter keeps a linked list of name resolution schemes. - * The scheme for a namespace is consulted first, followed by the - * list of schemes in an interpreter, followed by the default - * name resolution in Tcl. Schemes are added/removed from the - * interpreter's list by calling Tcl_AddInterpResolver and - * Tcl_RemoveInterpResolver. + * The interpreter keeps a linked list of name resolution schemes. The scheme + * for a namespace is consulted first, followed by the list of schemes in an + * interpreter, followed by the default name resolution in Tcl. Schemes are + * added/removed from the interpreter's list by calling Tcl_AddInterpResolver + * and Tcl_RemoveInterpResolver. */ typedef struct ResolverScheme { @@ -1300,18 +1549,23 @@ typedef struct ResolverScheme { /* Procedure handling command name * resolution. */ Tcl_ResolveVarProc *varResProc; - /* Procedure handling variable name - * resolution for variables that - * can only be handled at runtime. */ + /* Procedure handling variable name resolution + * for variables that can only be handled at + * runtime. */ Tcl_ResolveCompiledVarProc *compiledVarResProc; - /* Procedure handling variable name - * resolution at compile time. */ + /* Procedure handling variable name resolution + * at compile time. */ struct ResolverScheme *nextPtr; /* Pointer to next record in linked list. */ } ResolverScheme; -#ifdef TCL_TIP268 +/* + * Forward declaration of the TIP#143 limit handler structure. + */ + +typedef struct LimitHandler LimitHandler; + /* * TIP #268. * Values for the selection mode, i.e the package require preferences. @@ -1320,24 +1574,21 @@ typedef struct ResolverScheme { enum PkgPreferOptions { PKG_PREFER_LATEST, PKG_PREFER_STABLE }; -#endif /* *---------------------------------------------------------------- - * This structure defines an interpreter, which is a collection of - * commands plus other state information related to interpreting - * commands, such as variable storage. Primary responsibility for - * this data structure is in tclBasic.c, but almost every Tcl - * source file uses something in here. + * This structure defines an interpreter, which is a collection of commands + * plus other state information related to interpreting commands, such as + * variable storage. Primary responsibility for this data structure is in + * tclBasic.c, but almost every Tcl source file uses something in here. *---------------------------------------------------------------- */ typedef struct Interp { - /* - * Note: the first three fields must match exactly the fields in - * a Tcl_Interp struct (see tcl.h). If you change one, be sure to - * change the other. + * Note: the first three fields must match exactly the fields in a + * Tcl_Interp struct (see tcl.h). If you change one, be sure to change the + * other. * * The interpreter's result is held in both the string and the * objResultPtr fields. These fields hold, respectively, the result's @@ -1346,106 +1597,97 @@ typedef struct Interp { * The two fields are kept consistent unless some C code sets * interp->result directly. Programs should not access result and * objResultPtr directly; instead, they should always get and set the - * result using procedures such as Tcl_SetObjResult, Tcl_GetObjResult, - * and Tcl_GetStringResult. See the SetResult man page for details. + * result using procedures such as Tcl_SetObjResult, Tcl_GetObjResult, and + * Tcl_GetStringResult. See the SetResult man page for details. */ char *result; /* If the last command returned a string * result, this points to it. Should not be * accessed directly; see comment above. */ Tcl_FreeProc *freeProc; /* Zero means a string result is statically - * allocated. TCL_DYNAMIC means string - * result was allocated with ckalloc and - * should be freed with ckfree. Other values - * give address of procedure to invoke to - * free the string result. Tcl_Eval must - * free it before executing next command. */ - int errorLine; /* When TCL_ERROR is returned, this gives - * the line number in the command where the - * error occurred (1 means first line). */ + * allocated. TCL_DYNAMIC means string result + * was allocated with ckalloc and should be + * freed with ckfree. Other values give + * address of procedure to invoke to free the + * string result. Tcl_Eval must free it before + * executing next command. */ + int errorLine; /* When TCL_ERROR is returned, this gives the + * line number in the command where the error + * occurred (1 means first line). */ struct TclStubs *stubTable; - /* Pointer to the exported Tcl stub table. - * On previous versions of Tcl this is a - * pointer to the objResultPtr or a pointer - * to a buckets array in a hash table. We - * therefore have to do some careful checking - * before we can use this. */ + /* Pointer to the exported Tcl stub table. On + * previous versions of Tcl this is a pointer + * to the objResultPtr or a pointer to a + * buckets array in a hash table. We therefore + * have to do some careful checking before we + * can use this. */ TclHandle handle; /* Handle used to keep track of when this * interp is deleted. */ Namespace *globalNsPtr; /* The interpreter's global namespace. */ Tcl_HashTable *hiddenCmdTablePtr; - /* Hash table used by tclBasic.c to keep - * track of hidden commands on a per-interp + /* Hash table used by tclBasic.c to keep track + * of hidden commands on a per-interp * basis. */ ClientData interpInfo; /* Information used by tclInterp.c to keep - * track of master/slave interps on - * a per-interp basis. */ - Tcl_HashTable mathFuncTable;/* Contains all the math functions currently - * defined for the interpreter. Indexed by - * strings (function names); values have - * type (MathFunc *). */ - - + * track of master/slave interps on a + * per-interp basis. */ + Tcl_HashTable unused2; /* No longer used (was mathFuncTable) */ /* - * Information related to procedures and variables. See tclProc.c - * and tclVar.c for usage. + * Information related to procedures and variables. See tclProc.c and + * tclVar.c for usage. */ int numLevels; /* Keeps track of how many nested calls to * Tcl_Eval are in progress for this - * interpreter. It's used to delay deletion - * of the table until all Tcl_Eval - * invocations are completed. */ + * interpreter. It's used to delay deletion of + * the table until all Tcl_Eval invocations + * are completed. */ int maxNestingDepth; /* If numLevels exceeds this value then Tcl * assumes that infinite recursion has * occurred and it generates an error. */ CallFrame *framePtr; /* Points to top-most in stack of all nested - * procedure invocations. NULL means there - * are no active procedures. */ + * procedure invocations. */ CallFrame *varFramePtr; /* Points to the call frame whose variables * are currently in use (same as framePtr * unless an "uplevel" command is - * executing). NULL means no procedure is - * active or "uplevel 0" is executing. */ + * executing). */ ActiveVarTrace *activeVarTracePtr; - /* First in list of active traces for - * interp, or NULL if no active traces. */ - int returnCode; /* Completion code to return if current - * procedure exits with TCL_RETURN code. */ - char *errorInfo; /* Value to store in errorInfo if returnCode - * is TCL_ERROR. Malloc'ed, may be NULL */ - char *errorCode; /* Value to store in errorCode if returnCode - * is TCL_ERROR. Malloc'ed, may be NULL */ + /* First in list of active traces for interp, + * or NULL if no active traces. */ + int returnCode; /* [return -code] parameter. */ + CallFrame *rootFramePtr; /* Global frame pointer for this + * interpreter. */ + Namespace *lookupNsPtr; /* Namespace to use ONLY on the next + * TCL_EVAL_INVOKE call to Tcl_EvalObjv. */ /* - * Information used by Tcl_AppendResult to keep track of partial - * results. See Tcl_AppendResult code for details. + * Information used by Tcl_AppendResult to keep track of partial results. + * See Tcl_AppendResult code for details. */ - char *appendResult; /* Storage space for results generated - * by Tcl_AppendResult. Malloc-ed. NULL - * means not yet allocated. */ + char *appendResult; /* Storage space for results generated by + * Tcl_AppendResult. Ckalloc-ed. NULL means + * not yet allocated. */ int appendAvl; /* Total amount of space available at * partialResult. */ - int appendUsed; /* Number of non-null bytes currently - * stored at partialResult. */ + int appendUsed; /* Number of non-null bytes currently stored + * at partialResult. */ /* - * Information about packages. Used only in tclPkg.c. + * Information about packages. Used only in tclPkg.c. */ - Tcl_HashTable packageTable; /* Describes all of the packages loaded - * in or available to this interpreter. - * Keys are package names, values are - * (Package *) pointers. */ - char *packageUnknown; /* Command to invoke during "package - * require" commands for packages that - * aren't described in packageTable. - * Malloc'ed, may be NULL. */ - + Tcl_HashTable packageTable; /* Describes all of the packages loaded in or + * available to this interpreter. Keys are + * package names, values are (Package *) + * pointers. */ + char *packageUnknown; /* Command to invoke during "package require" + * commands for packages that aren't described + * in packageTable. Ckalloc'ed, may be + * NULL. */ /* * Miscellaneous information: */ @@ -1454,44 +1696,42 @@ typedef struct Interp { * has been called for this interpreter. */ int evalFlags; /* Flags to control next call to Tcl_Eval. * Normally zero, but may be set before - * calling Tcl_Eval. See below for valid + * calling Tcl_Eval. See below for valid * values. */ - int termOffset; /* Offset of character just after last one - * compiled or executed by Tcl_EvalObj. */ - LiteralTable literalTable; /* Contains LiteralEntry's describing all - * Tcl objects holding literals of scripts - * compiled by the interpreter. Indexed by - * the string representations of literals. - * Used to avoid creating duplicate - * objects. */ - int compileEpoch; /* Holds the current "compilation epoch" - * for this interpreter. This is - * incremented to invalidate existing - * ByteCodes when, e.g., a command with a - * compile procedure is redefined. */ - Proc *compiledProcPtr; /* If a procedure is being compiled, a - * pointer to its Proc structure; otherwise, - * this is NULL. Set by ObjInterpProc in - * tclProc.c and used by tclCompile.c to - * process local variables appropriately. */ + int unused1; /* No longer used (was termOffset) */ + LiteralTable literalTable; /* Contains LiteralEntry's describing all Tcl + * objects holding literals of scripts + * compiled by the interpreter. Indexed by the + * string representations of literals. Used to + * avoid creating duplicate objects. */ + int compileEpoch; /* Holds the current "compilation epoch" for + * this interpreter. This is incremented to + * invalidate existing ByteCodes when, e.g., a + * command with a compile procedure is + * redefined. */ + Proc *compiledProcPtr; /* If a procedure is being compiled, a pointer + * to its Proc structure; otherwise, this is + * NULL. Set by ObjInterpProc in tclProc.c and + * used by tclCompile.c to process local + * variables appropriately. */ ResolverScheme *resolverPtr; /* Linked list of name resolution schemes - * added to this interpreter. Schemes - * are added/removed by calling + * added to this interpreter. Schemes are + * added and removed by calling * Tcl_AddInterpResolvers and - * Tcl_RemoveInterpResolver. */ + * Tcl_RemoveInterpResolver respectively. */ Tcl_Obj *scriptFile; /* NULL means there is no nested source - * command active; otherwise this points to + * command active; otherwise this points to * pathPtr of the file being sourced. */ - int flags; /* Various flag bits. See below. */ + int flags; /* Various flag bits. See below. */ long randSeed; /* Seed used for rand() function. */ Trace *tracePtr; /* List of traces for this interpreter. */ - Tcl_HashTable *assocData; /* Hash table for associating data with - * this interpreter. Cleaned up when - * this interpreter is deleted. */ + Tcl_HashTable *assocData; /* Hash table for associating data with this + * interpreter. Cleaned up when this + * interpreter is deleted. */ struct ExecEnv *execEnvPtr; /* Execution environment for Tcl bytecode - * execution. Contains a pointer to the - * Tcl evaluation stack. */ + * execution. Contains a pointer to the Tcl + * evaluation stack. */ Tcl_Obj *emptyObjPtr; /* Points to an object holding an empty * string. Returned by Tcl_ObjSetVar2 when * variable traces change a variable in a @@ -1501,67 +1741,137 @@ typedef struct Interp { Tcl_Obj *objResultPtr; /* If the last command returned an object * result, this points to it. Should not be * accessed directly; see comment above. */ - Tcl_ThreadId threadId; /* ID of thread that owns the interpreter */ + Tcl_ThreadId threadId; /* ID of thread that owns the interpreter. */ ActiveCommandTrace *activeCmdTracePtr; /* First in list of active command traces for * interp, or NULL if no active traces. */ ActiveInterpTrace *activeInterpTracePtr; - /* First in list of active traces for - * interp, or NULL if no active traces. */ + /* First in list of active traces for interp, + * or NULL if no active traces. */ - int tracesForbiddingInline; /* Count of traces (in the list headed by + int tracesForbiddingInline; /* Count of traces (in the list headed by * tracePtr) that forbid inline bytecode - * compilation */ -#ifdef TCL_TIP280 - /* TIP #280 */ - CmdFrame* cmdFramePtr; /* Points to the command frame containing - * the location information for the current + * compilation. */ + + /* + * Fields used to manage extensible return options (TIP 90). + */ + + Tcl_Obj *returnOpts; /* A dictionary holding the options to the + * last [return] command. */ + + Tcl_Obj *errorInfo; /* errorInfo value (now as a Tcl_Obj). */ + Tcl_Obj *eiVar; /* cached ref to ::errorInfo variable. */ + Tcl_Obj *errorCode; /* errorCode value (now as a Tcl_Obj). */ + Tcl_Obj *ecVar; /* cached ref to ::errorInfo variable. */ + int returnLevel; /* [return -level] parameter. */ + + /* + * Resource limiting framework support (TIP#143). + */ + + struct { + int active; /* Flag values defining which limits have been + * set. */ + int granularityTicker; /* Counter used to determine how often to + * check the limits. */ + int exceeded; /* Which limits have been exceeded, described + * as flag values the same as the 'active' + * field. */ + + int cmdCount; /* Limit for how many commands to execute in + * the interpreter. */ + LimitHandler *cmdHandlers; + /* Handlers to execute when the limit is + * reached. */ + int cmdGranularity; /* Mod factor used to determine how often to + * evaluate the limit check. */ + + Tcl_Time time; /* Time limit for execution within the + * interpreter. */ + LimitHandler *timeHandlers; + /* Handlers to execute when the limit is + * reached. */ + int timeGranularity; /* Mod factor used to determine how often to + * evaluate the limit check. */ + Tcl_TimerToken timeEvent; + /* Handle for a timer callback that will occur + * when the time-limit is exceeded. */ + + Tcl_HashTable callbacks;/* Mapping from (interp,type) pair to data + * used to install a limit handler callback to + * run in _this_ interp when the limit is + * exceeded. */ + } limit; + + /* + * Information for improved default error generation from ensembles + * (TIP#112). + */ + + struct { + Tcl_Obj *const *sourceObjs; + /* What arguments were actually input into the + * *root* ensemble command? (Nested ensembles + * don't rewrite this.) NULL if we're not + * processing an ensemble. */ + int numRemovedObjs; /* How many arguments have been stripped off + * because of ensemble processing. */ + int numInsertedObjs; /* How many of the current arguments were + * inserted by an ensemble. */ + } ensembleRewrite; + + /* + * TIP #219: Global info for the I/O system. + */ + + Tcl_Obj *chanMsg; /* Error message set by channel drivers, for + * the propagation of arbitrary Tcl errors. + * This information, if present (chanMsg not + * NULL), takes precedence over a POSIX error + * code returned by a channel operation. */ + + /* + * Source code origin information (TIP #280). + */ + + CmdFrame *cmdFramePtr; /* Points to the command frame containing the + * location information for the current * command. */ - CONST CmdFrame* invokeCmdFramePtr; /* Points to the command frame which is the - * invoking context of the bytecode compiler. - * NULL when the byte code compiler is not - * active */ - int invokeWord; /* Index of the word in the command which + const CmdFrame *invokeCmdFramePtr; + /* Points to the command frame which is the + * invoking context of the bytecode compiler. + * NULL when the byte code compiler is not + * active. */ + int invokeWord; /* Index of the word in the command which * is getting compiled. */ - Tcl_HashTable* linePBodyPtr; - /* This table remembers for each - * statically defined procedure the - * location information for its - * body. It is keyed by the address of - * the Proc structure for a procedure. - * The values are "struct CmdFrame*". - */ - Tcl_HashTable* lineBCPtr; - /* This table remembers for each - * ByteCode object the location - * information for its body. It is - * keyed by the address of the Proc - * structure for a procedure. The - * values are "struct ExtCmdLoc*" (See - * tclCompile.h). - */ - Tcl_HashTable* lineLABCPtr; - Tcl_HashTable* lineLAPtr; - /* This table remembers for each - * argument of a command on the - * execution stack the index of the - * argument in the command, and the - * location data of the command. It is - * keyed by the address of the Tcl_Obj - * containing the argument. The values - * are "struct CFWord*" (See - * tclBasic.c). This allows commands - * like uplevel, eval, etc. to find - * location information for their - * arguments, if they are a proper - * literal argument to an invoking - * command. Alt view: An index to the - * CmdFrame stack keyed by command - * argument holders. - */ - ContLineLoc* scriptCLLocPtr; - /* This table points to the location data for + Tcl_HashTable *linePBodyPtr;/* This table remembers for each statically + * defined procedure the location information + * for its body. It is keyed by the address of + * the Proc structure for a procedure. The + * values are "struct CmdFrame*". */ + Tcl_HashTable *lineBCPtr; /* This table remembers for each ByteCode + * object the location information for its + * body. It is keyed by the address of the + * Proc structure for a procedure. The values + * are "struct ExtCmdLoc*". (See + * tclCompile.h) */ + Tcl_HashTable *lineLABCPtr; + Tcl_HashTable *lineLAPtr; /* This table remembers for each argument of a + * command on the execution stack the index of + * the argument in the command, and the + * location data of the command. It is keyed + * by the address of the Tcl_Obj containing + * the argument. The values are "struct + * CFWord*" (See tclBasic.c). This allows + * commands like uplevel, eval, etc. to find + * location information for their arguments, + * if they are a proper literal argument to an + * invoking command. Alt view: An index to the + * CmdFrame stack keyed by command argument + * holders. */ + ContLineLoc *scriptCLLocPtr;/* This table points to the location data for * invisible continuation lines in the script, * if any. This pointer is set by the function * TclEvalObjEx() in file "tclBasic.c", and @@ -1570,43 +1880,103 @@ typedef struct Interp { * execution what CompileEnv.clLoc does for * the bytecode compiler. */ -#endif -#ifdef TCL_TIP268 /* - * TIP #268. - * The currently active selection mode, - * i.e the package require preferences. + * TIP #268. The currently active selection mode, i.e. the package require + * preferences. */ - int packagePrefer; /* Current package selection mode. */ -#endif + int packagePrefer; /* Current package selection mode. */ + + /* + * Hashtables for variable traces and searches. + */ + + Tcl_HashTable varTraces; /* Hashtable holding the start of a variable's + * active trace list; varPtr is the key. */ + Tcl_HashTable varSearches; /* Hashtable holding the start of a variable's + * active searches list; varPtr is the key. */ + /* + * The thread-specific data ekeko: cache pointers or values that + * (a) do not change during the thread's lifetime + * (b) require access to TSD to determine at runtime + * (c) are accessed very often (e.g., at each command call) + * + * Note that these are the same for all interps in the same thread. They + * just have to be initialised for the thread's master interp, slaves + * inherit the value. + * + * They are used by the macros defined below. + */ + + void *allocCache; + void *pendingObjDataPtr; /* Pointer to the Cache and PendingObjData + * structs for this interp's thread; see + * tclObj.c and tclThreadAlloc.c */ + int *asyncReadyPtr; /* Pointer to the asyncReady indicator for + * this interp's thread; see tclAsync.c */ + int *stackBound; /* Pointer to the limit stack address + * allowable for invoking a new command + * without "risking" a C-stack overflow; see + * TclpCheckStackSpace in the platform's + * directory. */ + + +#ifdef TCL_COMPILE_STATS /* * Statistical information about the bytecode compiler and interpreter's * operation. */ -#ifdef TCL_COMPILE_STATS - ByteCodeStats stats; /* Holds compilation and execution - * statistics for this interpreter. */ -#endif /* TCL_COMPILE_STATS */ + ByteCodeStats stats; /* Holds compilation and execution statistics + * for this interpreter. */ +#endif /* TCL_COMPILE_STATS */ } Interp; /* + * Macros that use the TSD-ekeko. + */ + +#define TclAsyncReady(iPtr) \ + *((iPtr)->asyncReadyPtr) + +/* + * Macros for splicing into and out of doubly linked lists. They assume + * existence of struct items 'prevPtr' and 'nextPtr'. + * + * a = element to add or remove. + * b = list head. + * + * TclSpliceIn adds to the head of the list. + */ + +#define TclSpliceIn(a,b) \ + (a)->nextPtr = (b); \ + if ((b) != NULL) { \ + (b)->prevPtr = (a); \ + } \ + (a)->prevPtr = NULL, (b) = (a); + +#define TclSpliceOut(a,b) \ + if ((a)->prevPtr != NULL) { \ + (a)->prevPtr->nextPtr = (a)->nextPtr; \ + } else { \ + (b) = (a)->nextPtr; \ + } \ + if ((a)->nextPtr != NULL) { \ + (a)->nextPtr->prevPtr = (a)->prevPtr; \ + } + +/* * EvalFlag bits for Interp structures: * - * TCL_BRACKET_TERM 1 means that the current script is terminated by - * a close bracket rather than the end of the string. - * TCL_ALLOW_EXCEPTIONS 1 means it's OK for the script to terminate with - * a code other than TCL_OK or TCL_ERROR; 0 means - * codes other than these should be turned into errors. - */ - -#define TCL_BRACKET_TERM 1 -#define TCL_ALLOW_EXCEPTIONS 4 -#ifdef TCL_TIP280 -#define TCL_EVAL_FILE 2 -#define TCL_EVAL_CTX 8 -#endif + * TCL_ALLOW_EXCEPTIONS 1 means it's OK for the script to terminate with a + * code other than TCL_OK or TCL_ERROR; 0 means codes + * other than these should be turned into errors. + */ + +#define TCL_ALLOW_EXCEPTIONS 4 +#define TCL_EVAL_FILE 2 +#define TCL_EVAL_CTX 8 /* * Flag bits for Interp structures: @@ -1615,115 +1985,126 @@ typedef struct Interp { * don't process any more commands for it, and destroy * the structure as soon as all nested invocations of * Tcl_Eval are done. - * ERR_IN_PROGRESS: Non-zero means an error unwind is already in - * progress. Zero means a command proc has been - * invoked since last error occured. - * ERR_ALREADY_LOGGED: Non-zero means information has already been logged - * in $errorInfo for the current Tcl_Eval instance, - * so Tcl_Eval needn't log it (used to implement the - * "error message log" command). - * ERROR_CODE_SET: Non-zero means that Tcl_SetErrorCode has been - * called to record information for the current - * error. Zero means Tcl_Eval must clear the - * errorCode variable if an error is returned. - * EXPR_INITIALIZED: Non-zero means initialization specific to - * expressions has been carried out. - * DONT_COMPILE_CMDS_INLINE: Non-zero means that the bytecode compiler - * should not compile any commands into an inline - * sequence of instructions. This is set 1, for - * example, when command traces are requested. - * RAND_SEED_INITIALIZED: Non-zero means that the randSeed value of the - * interp has not be initialized. This is set 1 - * when we first use the rand() or srand() functions. - * SAFE_INTERP: Non zero means that the current interp is a - * safe interp (ie it has only the safe commands - * installed, less priviledge than a regular interp). - * USE_EVAL_DIRECT: Non-zero means don't use the compiler or byte-code - * interpreter; instead, have Tcl_EvalObj call - * Tcl_EvalEx. Used primarily for testing the - * new parser. + * ERR_ALREADY_LOGGED: Non-zero means information has already been logged in + * iPtr->errorInfo for the current Tcl_Eval instance, so + * Tcl_Eval needn't log it (used to implement the "error + * message log" command). + * DONT_COMPILE_CMDS_INLINE: Non-zero means that the bytecode compiler should + * not compile any commands into an inline sequence of + * instructions. This is set 1, for example, when command + * traces are requested. + * RAND_SEED_INITIALIZED: Non-zero means that the randSeed value of the interp + * has not be initialized. This is set 1 when we first + * use the rand() or srand() functions. + * SAFE_INTERP: Non zero means that the current interp is a safe + * interp (i.e. it has only the safe commands installed, + * less priviledge than a regular interp). + * INTERP_DEBUG_FRAME: Used for switching on various extra interpreter + * debug/info mechanisms (e.g. info frame eval/uplevel + * tracing) which are performance intensive. * INTERP_TRACE_IN_PROGRESS: Non-zero means that an interp trace is currently * active; so no further trace callbacks should be * invoked. + * INTERP_ALTERNATE_WRONG_ARGS: Used for listing second and subsequent forms + * of the wrong-num-args string in Tcl_WrongNumArgs. + * Makes it append instead of replacing and uses + * different intermediate text. + * + * WARNING: For the sake of some extensions that have made use of former + * internal values, do not re-use the flag values 2 (formerly ERR_IN_PROGRESS) + * or 8 (formerly ERROR_CODE_SET). */ -#define DELETED 1 -#define ERR_IN_PROGRESS 2 -#define ERR_ALREADY_LOGGED 4 -#define ERROR_CODE_SET 8 -#define EXPR_INITIALIZED 0x10 -#define DONT_COMPILE_CMDS_INLINE 0x20 -#define RAND_SEED_INITIALIZED 0x40 -#define SAFE_INTERP 0x80 -#define USE_EVAL_DIRECT 0x100 -#define INTERP_TRACE_IN_PROGRESS 0x200 +#define DELETED 1 +#define ERR_ALREADY_LOGGED 4 +#define INTERP_DEBUG_FRAME 0x10 +#define DONT_COMPILE_CMDS_INLINE 0x20 +#define RAND_SEED_INITIALIZED 0x40 +#define SAFE_INTERP 0x80 +#define INTERP_TRACE_IN_PROGRESS 0x200 +#define INTERP_ALTERNATE_WRONG_ARGS 0x400 +#define ERR_LEGACY_COPY 0x800 /* - * Maximum number of levels of nesting permitted in Tcl commands (used - * to catch infinite recursion). + * Maximum number of levels of nesting permitted in Tcl commands (used to + * catch infinite recursion). */ #define MAX_NESTING_DEPTH 1000 /* - * The macro below is used to modify a "char" value (e.g. by casting - * it to an unsigned character) so that it can be used safely with - * macros such as isspace. + * The macro below is used to modify a "char" value (e.g. by casting it to an + * unsigned character) so that it can be used safely with macros such as + * isspace. */ #define UCHAR(c) ((unsigned char) (c)) /* + * This macro is used to properly align the memory allocated by Tcl, giving + * the same alignment as the native malloc. + */ + +#if defined(__APPLE__) +#define TCL_ALLOCALIGN 16 +#else +#define TCL_ALLOCALIGN (2*sizeof(void *)) +#endif + +/* * This macro is used to determine the offset needed to safely allocate any * data structure in memory. Given a starting offset or size, it "rounds up" * or "aligns" the offset to the next 8-byte boundary so that any data * structure can be placed at the resulting offset without fear of an * alignment error. * - * WARNING!! DO NOT USE THIS MACRO TO ALIGN POINTERS: it will produce - * the wrong result on platforms that allocate addresses that are divisible - * by 4 or 2. Only use it for offsets or sizes. + * WARNING!! DO NOT USE THIS MACRO TO ALIGN POINTERS: it will produce the + * wrong result on platforms that allocate addresses that are divisible by 4 + * or 2. Only use it for offsets or sizes. + * + * This macro is only used by tclCompile.c in the core (Bug 926445). It + * however not be made file static, as extensions that touch bytecodes + * (notably tbcload) require it. */ #define TCL_ALIGN(x) (((int)(x) + 7) & ~7) /* - * The following enum values are used to specify the runtime platform - * setting of the tclPlatform variable. + * The following enum values are used to specify the runtime platform setting + * of the tclPlatform variable. */ typedef enum { - TCL_PLATFORM_UNIX, /* Any Unix-like OS. */ - TCL_PLATFORM_WINDOWS=2 /* Any Microsoft Windows OS. */ + TCL_PLATFORM_UNIX = 0, /* Any Unix-like OS. */ + TCL_PLATFORM_WINDOWS = 2 /* Any Microsoft Windows OS. */ } TclPlatformType; /* - * The following enum values are used to indicate the translation - * of a Tcl channel. Declared here so that each platform can define - * TCL_PLATFORM_TRANSLATION to the native translation on that platform + * The following enum values are used to indicate the translation of a Tcl + * channel. Declared here so that each platform can define + * TCL_PLATFORM_TRANSLATION to the native translation on that platform. */ typedef enum TclEolTranslation { - TCL_TRANSLATE_AUTO, /* Eol == \r, \n and \r\n. */ - TCL_TRANSLATE_CR, /* Eol == \r. */ - TCL_TRANSLATE_LF, /* Eol == \n. */ - TCL_TRANSLATE_CRLF /* Eol == \r\n. */ + TCL_TRANSLATE_AUTO, /* Eol == \r, \n and \r\n. */ + TCL_TRANSLATE_CR, /* Eol == \r. */ + TCL_TRANSLATE_LF, /* Eol == \n. */ + TCL_TRANSLATE_CRLF /* Eol == \r\n. */ } TclEolTranslation; /* * Flags for TclInvoke: * - * TCL_INVOKE_HIDDEN Invoke a hidden command; if not set, - * invokes an exposed command. - * TCL_INVOKE_NO_UNKNOWN If set, "unknown" is not invoked if - * the command to be invoked is not found. - * Only has an effect if invoking an exposed - * command, i.e. if TCL_INVOKE_HIDDEN is not - * also set. - * TCL_INVOKE_NO_TRACEBACK Does not record traceback information if - * the invoked command returns an error. Used - * if the caller plans on recording its own - * traceback information. + * TCL_INVOKE_HIDDEN Invoke a hidden command; if not set, invokes + * an exposed command. + * TCL_INVOKE_NO_UNKNOWN If set, "unknown" is not invoked if the + * command to be invoked is not found. Only has + * an effect if invoking an exposed command, + * i.e. if TCL_INVOKE_HIDDEN is not also set. + * TCL_INVOKE_NO_TRACEBACK Does not record traceback information if the + * invoked command returns an error. Used if the + * caller plans on recording its own traceback + * information. */ #define TCL_INVOKE_HIDDEN (1<<0) @@ -1731,62 +2112,176 @@ typedef enum TclEolTranslation { #define TCL_INVOKE_NO_TRACEBACK (1<<2) /* - * The structure used as the internal representation of Tcl list - * objects. This is an array of pointers to the element objects. This array - * is grown (reallocated and copied) as necessary to hold all the list's - * element pointers. The array might contain more slots than currently used - * to hold all element pointers. This is done to make append operations + * The structure used as the internal representation of Tcl list objects. This + * struct is grown (reallocated and copied) as necessary to hold all the + * list's element pointers. The struct might contain more slots than currently + * used to hold all element pointers. This is done to make append operations * faster. */ typedef struct List { + int refCount; int maxElemCount; /* Total number of element array slots. */ int elemCount; /* Current number of list elements. */ - Tcl_Obj **elements; /* Array of pointers to element objects. */ + int canonicalFlag; /* Set if the string representation was + * derived from the list representation. May + * be ignored if there is no string rep at + * all.*/ + Tcl_Obj *elements; /* First list element; the struct is grown to + * accomodate all elements. */ } List; +#define LIST_MAX \ + (1 + (int)(((size_t)UINT_MAX - sizeof(List))/sizeof(Tcl_Obj *))) + +/* + * Macro used to get the elements of a list object. + */ + +#define ListRepPtr(listPtr) \ + ((List *) (listPtr)->internalRep.twoPtrValue.ptr1) + +#define ListSetIntRep(objPtr, listRepPtr) \ + (objPtr)->internalRep.twoPtrValue.ptr1 = (void *)(listRepPtr), \ + (objPtr)->internalRep.twoPtrValue.ptr2 = NULL, \ + (listRepPtr)->refCount++, \ + (objPtr)->typePtr = &tclListType + +#define ListObjGetElements(listPtr, objc, objv) \ + ((objv) = &(ListRepPtr(listPtr)->elements), \ + (objc) = ListRepPtr(listPtr)->elemCount) + +#define ListObjLength(listPtr, len) \ + ((len) = ListRepPtr(listPtr)->elemCount) + +#define ListObjIsCanonical(listPtr) \ + (((listPtr)->bytes == NULL) || ListRepPtr(listPtr)->canonicalFlag) + +#define TclListObjGetElements(interp, listPtr, objcPtr, objvPtr) \ + (((listPtr)->typePtr == &tclListType) \ + ? ((ListObjGetElements((listPtr), *(objcPtr), *(objvPtr))), TCL_OK)\ + : Tcl_ListObjGetElements((interp), (listPtr), (objcPtr), (objvPtr))) + +#define TclListObjLength(interp, listPtr, lenPtr) \ + (((listPtr)->typePtr == &tclListType) \ + ? ((ListObjLength((listPtr), *(lenPtr))), TCL_OK)\ + : Tcl_ListObjLength((interp), (listPtr), (lenPtr))) + +#define TclListObjIsCanonical(listPtr) \ + (((listPtr)->typePtr == &tclListType) ? ListObjIsCanonical((listPtr)) : 0) + +/* + * Macros providing a faster path to integers: Tcl_GetLongFromObj everywhere, + * Tcl_GetIntFromObj and TclGetIntForIndex on platforms where longs are ints. + * + * WARNING: these macros eval their args more than once. + */ + +#define TclGetLongFromObj(interp, objPtr, longPtr) \ + (((objPtr)->typePtr == &tclIntType) \ + ? ((*(longPtr) = (objPtr)->internalRep.longValue), TCL_OK) \ + : Tcl_GetLongFromObj((interp), (objPtr), (longPtr))) + +#if (LONG_MAX == INT_MAX) +#define TclGetIntFromObj(interp, objPtr, intPtr) \ + (((objPtr)->typePtr == &tclIntType) \ + ? ((*(intPtr) = (objPtr)->internalRep.longValue), TCL_OK) \ + : Tcl_GetIntFromObj((interp), (objPtr), (intPtr))) +#define TclGetIntForIndexM(interp, objPtr, endValue, idxPtr) \ + (((objPtr)->typePtr == &tclIntType) \ + ? ((*(idxPtr) = (objPtr)->internalRep.longValue), TCL_OK) \ + : TclGetIntForIndex((interp), (objPtr), (endValue), (idxPtr))) +#else +#define TclGetIntFromObj(interp, objPtr, intPtr) \ + Tcl_GetIntFromObj((interp), (objPtr), (intPtr)) +#define TclGetIntForIndexM(interp, objPtr, ignore, idxPtr) \ + TclGetIntForIndex(interp, objPtr, ignore, idxPtr) +#endif /* - * The following types are used for getting and storing platform-specific - * file attributes in tclFCmd.c and the various platform-versions of - * that file. This is done to have as much common code as possible - * in the file attributes code. For more information about the callbacks, - * see TclFileAttrsCmd in tclFCmd.c. + * Flag values for TclTraceDictPath(). + * + * DICT_PATH_READ indicates that all entries on the path must exist but no + * updates will be needed. + * + * DICT_PATH_UPDATE indicates that we are going to be doing an update at the + * tip of the path, so duplication of shared objects should be done along the + * way. + * + * DICT_PATH_EXISTS indicates that we are performing an existance test and a + * lookup failure should therefore not be an error. If (and only if) this flag + * is set, TclTraceDictPath() will return the special value + * DICT_PATH_NON_EXISTENT if the path is not traceable. + * + * DICT_PATH_CREATE (which also requires the DICT_PATH_UPDATE bit to be set) + * indicates that we are to create non-existant dictionaries on the path. */ -typedef int (TclGetFileAttrProc) _ANSI_ARGS_((Tcl_Interp *interp, - int objIndex, Tcl_Obj *fileName, Tcl_Obj **attrObjPtrPtr)); -typedef int (TclSetFileAttrProc) _ANSI_ARGS_((Tcl_Interp *interp, - int objIndex, Tcl_Obj *fileName, Tcl_Obj *attrObjPtr)); +#define DICT_PATH_READ 0 +#define DICT_PATH_UPDATE 1 +#define DICT_PATH_EXISTS 2 +#define DICT_PATH_CREATE 5 + +#define DICT_PATH_NON_EXISTENT ((Tcl_Obj *) (void *) 1) + +/* + *---------------------------------------------------------------- + * Data structures related to the filesystem internals + *---------------------------------------------------------------- + */ + +/* + * The version_2 filesystem is private to Tcl. As and when these changes have + * been thoroughly tested and investigated a new public filesystem interface + * will be released. The aim is more versatile virtual filesystem interfaces, + * more efficiency in 'path' manipulation and usage, and cleaner filesystem + * code internally. + */ + +#define TCL_FILESYSTEM_VERSION_2 ((Tcl_FSVersion) 0x2) +typedef ClientData (TclFSGetCwdProc2)(ClientData clientData); + +/* + * The following types are used for getting and storing platform-specific file + * attributes in tclFCmd.c and the various platform-versions of that file. + * This is done to have as much common code as possible in the file attributes + * code. For more information about the callbacks, see TclFileAttrsCmd in + * tclFCmd.c. + */ + +typedef int (TclGetFileAttrProc)(Tcl_Interp *interp, int objIndex, + Tcl_Obj *fileName, Tcl_Obj **attrObjPtrPtr); +typedef int (TclSetFileAttrProc)(Tcl_Interp *interp, int objIndex, + Tcl_Obj *fileName, Tcl_Obj *attrObjPtr); typedef struct TclFileAttrProcs { - TclGetFileAttrProc *getProc; /* The procedure for getting attrs. */ - TclSetFileAttrProc *setProc; /* The procedure for setting attrs. */ + TclGetFileAttrProc *getProc;/* The procedure for getting attrs. */ + TclSetFileAttrProc *setProc;/* The procedure for setting attrs. */ } TclFileAttrProcs; /* * Opaque handle used in pipeline routines to encapsulate platform-dependent - * state. + * state. */ typedef struct TclFile_ *TclFile; - -/* - * Opaque names for platform specific types. - */ - -typedef struct TclpTime_t_ *TclpTime_t; -typedef struct TclpTime_t_ *CONST TclpTime_t_CONST; /* - * The "globParameters" argument of the function TclGlob is an - * or'ed combination of the following values: + * The "globParameters" argument of the function TclGlob is an or'ed + * combination of the following values: */ -#define TCL_GLOBMODE_NO_COMPLAIN 1 -#define TCL_GLOBMODE_JOIN 2 -#define TCL_GLOBMODE_DIR 4 -#define TCL_GLOBMODE_TAILS 8 +#define TCL_GLOBMODE_NO_COMPLAIN 1 +#define TCL_GLOBMODE_JOIN 2 +#define TCL_GLOBMODE_DIR 4 +#define TCL_GLOBMODE_TAILS 8 + +typedef enum Tcl_PathPart { + TCL_PATH_DIRNAME, + TCL_PATH_TAIL, + TCL_PATH_EXTENSION, + TCL_PATH_ROOT +} Tcl_PathPart; /* *---------------------------------------------------------------- @@ -1794,12 +2289,10 @@ typedef struct TclpTime_t_ *CONST TclpTime_t_CONST; *---------------------------------------------------------------- */ -typedef int (TclStatProc_) _ANSI_ARGS_((CONST char *path, Tcl_StatBuf *buf)); -typedef int (TclAccessProc_) _ANSI_ARGS_((CONST char *path, int mode)); -typedef Tcl_Channel (TclOpenFileChannelProc_) _ANSI_ARGS_((Tcl_Interp *interp, - CONST char *fileName, CONST char *modeString, - int permissions)); - +typedef int (TclStatProc_)(CONST char *path, struct stat *buf); +typedef int (TclAccessProc_)(CONST char *path, int mode); +typedef Tcl_Channel (TclOpenFileChannelProc_)(Tcl_Interp *interp, + CONST char *fileName, CONST char *modeString, int permissions); /* *---------------------------------------------------------------- @@ -1812,324 +2305,463 @@ typedef Tcl_ObjCmdProc *TclObjCmdProcType; /* *---------------------------------------------------------------- + * Data structures for process-global values. + *---------------------------------------------------------------- + */ + +typedef void (TclInitProcessGlobalValueProc)(char **valuePtr, int *lengthPtr, + Tcl_Encoding *encodingPtr); + +/* + * A ProcessGlobalValue struct exists for each internal value in Tcl that is + * to be shared among several threads. Each thread sees a (Tcl_Obj) copy of + * the value, and the master is kept as a counted string, with epoch and mutex + * control. Each ProcessGlobalValue struct should be a static variable in some + * file. + */ + +typedef struct ProcessGlobalValue { + int epoch; /* Epoch counter to detect changes in the + * master value. */ + int numBytes; /* Length of the master string. */ + char *value; /* The master string value. */ + Tcl_Encoding encoding; /* system encoding when master string was + * initialized. */ + TclInitProcessGlobalValueProc *proc; + /* A procedure to initialize the master string + * copy when a "get" request comes in before + * any "set" request has been received. */ + Tcl_Mutex mutex; /* Enforce orderly access from multiple + * threads. */ + Tcl_ThreadDataKey key; /* Key for per-thread data holding the + * (Tcl_Obj) copy for each thread. */ +} ProcessGlobalValue; + +/* + *---------------------------------------------------------------------- + * Flags for TclParseNumber + *---------------------------------------------------------------------- + */ + +#define TCL_PARSE_DECIMAL_ONLY 1 + /* Leading zero doesn't denote octal or + * hex. */ +#define TCL_PARSE_OCTAL_ONLY 2 + /* Parse octal even without prefix. */ +#define TCL_PARSE_HEXADECIMAL_ONLY 4 + /* Parse hexadecimal even without prefix. */ +#define TCL_PARSE_INTEGER_ONLY 8 + /* Disable floating point parsing. */ +#define TCL_PARSE_SCAN_PREFIXES 16 + /* Use [scan] rules dealing with 0? + * prefixes. */ +#define TCL_PARSE_NO_WHITESPACE 32 + /* Reject leading/trailing whitespace. */ + +/* + *---------------------------------------------------------------------- + * Type values TclGetNumberFromObj + *---------------------------------------------------------------------- + */ + +#define TCL_NUMBER_LONG 1 +#define TCL_NUMBER_WIDE 2 +#define TCL_NUMBER_BIG 3 +#define TCL_NUMBER_DOUBLE 4 +#define TCL_NUMBER_NAN 5 + +/* + *---------------------------------------------------------------- * Variables shared among Tcl modules but not used by the outside world. *---------------------------------------------------------------- */ -extern Tcl_Time tclBlockTime; -extern int tclBlockTimeSet; -extern char * tclExecutableName; -extern char * tclNativeExecutableName; -extern char * tclDefaultEncodingDir; -extern Tcl_ChannelType tclFileChannelType; -extern char * tclMemDumpFileName; -extern TclPlatformType tclPlatform; -extern Tcl_NotifierProcs tclOriginalNotifier; +MODULE_SCOPE char *tclNativeExecutableName; +MODULE_SCOPE int tclFindExecutableSearchDone; +MODULE_SCOPE char *tclMemDumpFileName; +MODULE_SCOPE TclPlatformType tclPlatform; +MODULE_SCOPE Tcl_NotifierProcs tclOriginalNotifier; + +/* + * TIP #233 (Virtualized Time) + * Data for the time hooks, if any. + */ + +MODULE_SCOPE Tcl_GetTimeProc *tclGetTimeProcPtr; +MODULE_SCOPE Tcl_ScaleTimeProc *tclScaleTimeProcPtr; +MODULE_SCOPE ClientData tclTimeClientData; /* * Variables denoting the Tcl object types defined in the core. */ -extern Tcl_ObjType tclBooleanType; -extern Tcl_ObjType tclByteArrayType; -extern Tcl_ObjType tclByteCodeType; -extern Tcl_ObjType tclDoubleType; -extern Tcl_ObjType tclEndOffsetType; -extern Tcl_ObjType tclIntType; -extern Tcl_ObjType tclListType; -extern Tcl_ObjType tclProcBodyType; -extern Tcl_ObjType tclStringType; -extern Tcl_ObjType tclArraySearchType; -extern Tcl_ObjType tclIndexType; -extern Tcl_ObjType tclNsNameType; -extern Tcl_ObjType tclWideIntType; +MODULE_SCOPE Tcl_ObjType tclBignumType; +MODULE_SCOPE Tcl_ObjType tclBooleanType; +MODULE_SCOPE Tcl_ObjType tclByteArrayType; +MODULE_SCOPE Tcl_ObjType tclByteCodeType; +MODULE_SCOPE Tcl_ObjType tclDoubleType; +MODULE_SCOPE Tcl_ObjType tclEndOffsetType; +MODULE_SCOPE Tcl_ObjType tclIntType; +MODULE_SCOPE Tcl_ObjType tclListType; +MODULE_SCOPE Tcl_ObjType tclDictType; +MODULE_SCOPE Tcl_ObjType tclProcBodyType; +MODULE_SCOPE Tcl_ObjType tclStringType; +MODULE_SCOPE Tcl_ObjType tclArraySearchType; +MODULE_SCOPE Tcl_ObjType tclEnsembleCmdType; +#ifndef NO_WIDE_TYPE +MODULE_SCOPE Tcl_ObjType tclWideIntType; +#endif +MODULE_SCOPE Tcl_ObjType tclRegexpType; /* * Variables denoting the hash key types defined in the core. */ -extern Tcl_HashKeyType tclArrayHashKeyType; -extern Tcl_HashKeyType tclOneWordHashKeyType; -extern Tcl_HashKeyType tclStringHashKeyType; -extern Tcl_HashKeyType tclObjHashKeyType; +MODULE_SCOPE Tcl_HashKeyType tclArrayHashKeyType; +MODULE_SCOPE Tcl_HashKeyType tclOneWordHashKeyType; +MODULE_SCOPE Tcl_HashKeyType tclStringHashKeyType; +MODULE_SCOPE Tcl_HashKeyType tclObjHashKeyType; /* * The head of the list of free Tcl objects, and the total number of Tcl * objects ever allocated and freed. */ -extern Tcl_Obj * tclFreeObjList; +MODULE_SCOPE Tcl_Obj * tclFreeObjList; #ifdef TCL_COMPILE_STATS -extern long tclObjsAlloced; -extern long tclObjsFreed; +MODULE_SCOPE long tclObjsAlloced; +MODULE_SCOPE long tclObjsFreed; #define TCL_MAX_SHARED_OBJ_STATS 5 -extern long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS]; +MODULE_SCOPE long tclObjsShared[TCL_MAX_SHARED_OBJ_STATS]; #endif /* TCL_COMPILE_STATS */ /* - * Pointer to a heap-allocated string of length zero that the Tcl core uses - * as the value of an empty string representation for an object. This value - * is shared by all new objects allocated by Tcl_NewObj. + * Pointer to a heap-allocated string of length zero that the Tcl core uses as + * the value of an empty string representation for an object. This value is + * shared by all new objects allocated by Tcl_NewObj. */ -extern char * tclEmptyStringRep; -extern char tclEmptyString; +MODULE_SCOPE char * tclEmptyStringRep; +MODULE_SCOPE char tclEmptyString; + +/* Flags for conversion of doubles to digit strings */ + +#define TCL_DD_SHORTEST 0x4 + /* Use the shortest possible string */ +#define TCL_DD_STEELE 0x5 + /* Use the original Steele&White algorithm */ +#define TCL_DD_E_FORMAT 0x2 + /* Use a fixed-length string of digits, + * suitable for E format*/ +#define TCL_DD_F_FORMAT 0x3 + /* Use a fixed number of digits after the + * decimal point, suitable for F format */ + +#define TCL_DD_SHORTEN_FLAG 0x4 + /* Allow return of a shorter digit string + * if it converts losslessly */ +#define TCL_DD_NO_QUICK 0x8 + /* Debug flag: forbid quick FP conversion */ + +#define TCL_DD_CONVERSION_TYPE_MASK 0x3 + /* Mask to isolate the conversion type */ +#define TCL_DD_STEELE0 0x1 + /* 'Steele&White' after masking */ +#define TCL_DD_SHORTEST0 0x0 + /* 'Shortest possible' after masking */ /* *---------------------------------------------------------------- - * Procedures shared among Tcl modules but not used by the outside - * world: + * Procedures shared among Tcl modules but not used by the outside world: *---------------------------------------------------------------- */ -#ifdef TCL_TIP280 -EXTERN void TclAdvanceLines _ANSI_ARGS_((int* line, CONST char* start, - CONST char* end)); -EXTERN void TclAdvanceContinuations _ANSI_ARGS_((int* line, int** next, - int loc)); -EXTERN ContLineLoc* TclContinuationsEnter _ANSI_ARGS_((Tcl_Obj* objPtr, int num, - int* loc)); -EXTERN void TclContinuationsEnterDerived _ANSI_ARGS_((Tcl_Obj* objPtr, - int start, int* clNext)); -EXTERN ContLineLoc* TclContinuationsGet _ANSI_ARGS_((Tcl_Obj* objPtr)); - -EXTERN void TclContinuationsCopy _ANSI_ARGS_((Tcl_Obj* objPtr, Tcl_Obj* originObjPtr)); - -#endif -EXTERN int TclArraySet _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *arrayNameObj, Tcl_Obj *arrayElemObj)); -EXTERN int TclCheckBadOctal _ANSI_ARGS_((Tcl_Interp *interp, - CONST char *value)); -EXTERN void TclDeleteNamespaceVars _ANSI_ARGS_((Namespace *nsPtr)); - -#ifdef TCL_TIP280 -EXTERN int TclEvalObjEx _ANSI_ARGS_((Tcl_Interp *interp, - register Tcl_Obj *objPtr, - int flags, - CONST CmdFrame* invoker, - int word)); - -EXTERN void TclArgumentEnter _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj* objv[], int objc, CmdFrame* cf)); -EXTERN void TclArgumentRelease _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj* objv[], int objc)); -EXTERN void TclArgumentBCEnter _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj* objv[], int objc, - void* codePtr, CmdFrame* cfPtr, int pc)); -EXTERN void TclArgumentBCRelease _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj* objv[], int objc, - void* codePtr, int pc)); - -EXTERN void TclArgumentGet _ANSI_ARGS_((Tcl_Interp* interp, Tcl_Obj* obj, - CmdFrame** cfPtrPtr, int* wordPtr)); +MODULE_SCOPE void TclAdvanceContinuations(int* line, int** next, int loc); +MODULE_SCOPE void TclAdvanceLines(int *line, const char *start, + const char *end); +MODULE_SCOPE void TclArgumentEnter(Tcl_Interp* interp, + Tcl_Obj* objv[], int objc, CmdFrame* cf); +MODULE_SCOPE void TclArgumentRelease(Tcl_Interp* interp, + Tcl_Obj* objv[], int objc); +MODULE_SCOPE void TclArgumentGet(Tcl_Interp* interp, Tcl_Obj* obj, + CmdFrame **cfPtrPtr, int *wordPtr); +MODULE_SCOPE void TclArgumentBCEnter(Tcl_Interp *interp, + Tcl_Obj* objv[], int objc, + void *codePtr, CmdFrame *cfPtr, int pc); +MODULE_SCOPE void TclArgumentBCRelease(Tcl_Interp *interp, + Tcl_Obj *objv[], int objc, + void *codePtr, int pc); +MODULE_SCOPE int TclArraySet(Tcl_Interp *interp, + Tcl_Obj *arrayNameObj, Tcl_Obj *arrayElemObj); +MODULE_SCOPE double TclBignumToDouble(mp_int *bignum); +MODULE_SCOPE int TclByteArrayMatch(const unsigned char *string, + int strLen, const unsigned char *pattern, + int ptnLen, int flags); +MODULE_SCOPE double TclCeil(mp_int *a); +MODULE_SCOPE int TclCheckBadOctal(Tcl_Interp *interp, const char *value); +MODULE_SCOPE int TclChanCaughtErrorBypass(Tcl_Interp *interp, + Tcl_Channel chan); +MODULE_SCOPE ContLineLoc* TclContinuationsEnter(Tcl_Obj *objPtr, int num, + int *loc); +MODULE_SCOPE void TclContinuationsEnterDerived(Tcl_Obj *objPtr, + int start, int *clNext); +MODULE_SCOPE ContLineLoc* TclContinuationsGet(Tcl_Obj *objPtr); +MODULE_SCOPE void TclContinuationsCopy(Tcl_Obj *objPtr, + Tcl_Obj *originObjPtr); +MODULE_SCOPE int TclConvertElement(CONST char *src, int length, + char *dst, int flags); +MODULE_SCOPE void TclDeleteNamespaceVars(Namespace *nsPtr); +/* TIP #280 - Modified token based evulation, with line information. */ +MODULE_SCOPE int TclEvalEx(Tcl_Interp *interp, const char *script, + int numBytes, int flags, int line, + int *clNextOuter, CONST char *outerScript); +MODULE_SCOPE int TclFileAttrsCmd(Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE int TclFileCopyCmd(Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE int TclFileDeleteCmd(Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE int TclFileMakeDirsCmd(Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE int TclFileRenameCmd(Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE void TclCreateLateExitHandler(Tcl_ExitProc *proc, + ClientData clientData); +MODULE_SCOPE void TclDeleteLateExitHandler(Tcl_ExitProc *proc, + ClientData clientData); +MODULE_SCOPE void TclFinalizeAllocSubsystem(void); +MODULE_SCOPE void TclFinalizeAsync(void); +MODULE_SCOPE void TclFinalizeDoubleConversion(void); +MODULE_SCOPE void TclFinalizeEncodingSubsystem(void); +MODULE_SCOPE void TclFinalizeEnvironment(void); +MODULE_SCOPE void TclFinalizeExecution(void); +MODULE_SCOPE void TclFinalizeIOSubsystem(void); +MODULE_SCOPE void TclFinalizeFilesystem(void); +MODULE_SCOPE void TclResetFilesystem(void); +MODULE_SCOPE void TclFinalizeLoad(void); +MODULE_SCOPE void TclFinalizeLock(void); +MODULE_SCOPE void TclFinalizeMemorySubsystem(void); +MODULE_SCOPE void TclFinalizeNotifier(void); +MODULE_SCOPE void TclFinalizeObjects(void); +MODULE_SCOPE void TclFinalizePreserve(void); +MODULE_SCOPE void TclFinalizeSynchronization(void); +MODULE_SCOPE void TclFinalizeThreadAlloc(void); +MODULE_SCOPE void TclFinalizeThreadData(void); +MODULE_SCOPE void TclFinalizeThreadObjects(void); +MODULE_SCOPE double TclFloor(mp_int *a); +MODULE_SCOPE void TclFormatNaN(double value, char *buffer); +MODULE_SCOPE int TclFSFileAttrIndex(Tcl_Obj *pathPtr, + const char *attributeName, int *indexPtr); +MODULE_SCOPE void TclFSUnloadTempFile(Tcl_LoadHandle loadHandle); +MODULE_SCOPE int * TclGetAsyncReadyPtr(void); +MODULE_SCOPE Tcl_Obj * TclGetBgErrorHandler(Tcl_Interp *interp); +MODULE_SCOPE int TclGetChannelFromObj(Tcl_Interp *interp, + Tcl_Obj *objPtr, Tcl_Channel *chanPtr, + int *modePtr, int flags); +MODULE_SCOPE int TclGetNumberFromObj(Tcl_Interp *interp, + Tcl_Obj *objPtr, ClientData *clientDataPtr, + int *typePtr); +MODULE_SCOPE int TclGetOpenModeEx(Tcl_Interp *interp, + const char *modeString, int *seekFlagPtr, + int *binaryPtr); +MODULE_SCOPE Tcl_Obj * TclGetProcessGlobalValue(ProcessGlobalValue *pgvPtr); +MODULE_SCOPE const char *TclGetSrcInfoForCmd(Interp *iPtr, int *lenPtr); +MODULE_SCOPE int TclGlob(Tcl_Interp *interp, char *pattern, + Tcl_Obj *unquotedPrefix, int globFlags, + Tcl_GlobTypeData *types); +MODULE_SCOPE int TclIncrObj(Tcl_Interp *interp, Tcl_Obj *valuePtr, + Tcl_Obj *incrPtr); +MODULE_SCOPE Tcl_Obj * TclIncrObjVar2(Tcl_Interp *interp, Tcl_Obj *part1Ptr, + Tcl_Obj *part2Ptr, Tcl_Obj *incrPtr, int flags); +MODULE_SCOPE int TclInfoExistsCmd(ClientData dummy, Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE Tcl_Obj * TclInfoFrame(Tcl_Interp *interp, CmdFrame *framePtr); +MODULE_SCOPE int TclInfoGlobalsCmd(ClientData dummy, Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE int TclInfoLocalsCmd(ClientData dummy, Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE int TclInfoVarsCmd(ClientData dummy, Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE void TclInitAlloc(void); +MODULE_SCOPE void TclInitDbCkalloc(void); +MODULE_SCOPE void TclInitDoubleConversion(void); +MODULE_SCOPE void TclInitEmbeddedConfigurationInformation( + Tcl_Interp *interp); +MODULE_SCOPE void TclInitEncodingSubsystem(void); +MODULE_SCOPE void TclInitIOSubsystem(void); +MODULE_SCOPE void TclInitLimitSupport(Tcl_Interp *interp); +MODULE_SCOPE void TclInitNamespaceSubsystem(void); +MODULE_SCOPE void TclInitNotifier(void); +MODULE_SCOPE void TclInitObjSubsystem(void); +MODULE_SCOPE void TclInitSubsystems(void); +MODULE_SCOPE int TclInterpReady(Tcl_Interp *interp); +MODULE_SCOPE int TclIsLocalScalar(const char *src, int len); +MODULE_SCOPE int TclIsSpaceProc(char byte); +MODULE_SCOPE int TclJoinThread(Tcl_ThreadId id, int *result); +MODULE_SCOPE void TclLimitRemoveAllHandlers(Tcl_Interp *interp); +MODULE_SCOPE Tcl_Obj * TclLindexList(Tcl_Interp *interp, + Tcl_Obj *listPtr, Tcl_Obj *argPtr); +MODULE_SCOPE Tcl_Obj * TclLindexFlat(Tcl_Interp *interp, Tcl_Obj *listPtr, + int indexCount, Tcl_Obj *const indexArray[]); +/* TIP #280 */ +MODULE_SCOPE void TclListLines(Tcl_Obj *listObj, int line, int n, + int *lines, Tcl_Obj *const *elems); +MODULE_SCOPE Tcl_Obj * TclListObjCopy(Tcl_Interp *interp, Tcl_Obj *listPtr); +MODULE_SCOPE int TclLoadFile(Tcl_Interp *interp, Tcl_Obj *pathPtr, + int symc, const char *symbols[], + Tcl_PackageInitProc **procPtrs[], + Tcl_LoadHandle *handlePtr, + ClientData *clientDataPtr, + Tcl_FSUnloadFileProc **unloadProcPtr); +MODULE_SCOPE Tcl_Obj * TclLsetList(Tcl_Interp *interp, Tcl_Obj *listPtr, + Tcl_Obj *indexPtr, Tcl_Obj *valuePtr); +MODULE_SCOPE Tcl_Obj * TclLsetFlat(Tcl_Interp *interp, Tcl_Obj *listPtr, + int indexCount, Tcl_Obj *const indexArray[], + Tcl_Obj *valuePtr); +MODULE_SCOPE Tcl_Command TclMakeEnsemble(Tcl_Interp *interp, const char *name, + const EnsembleImplMap map[]); +MODULE_SCOPE int TclMaxListLength(CONST char *bytes, int numBytes, + CONST char **endPtr); +MODULE_SCOPE int TclMergeReturnOptions(Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[], Tcl_Obj **optionsPtrPtr, + int *codePtr, int *levelPtr); +MODULE_SCOPE int TclNokia770Doubles(); +MODULE_SCOPE void TclObjVarErrMsg(Tcl_Interp *interp, Tcl_Obj *part1Ptr, + Tcl_Obj *part2Ptr, const char *operation, + const char *reason, int index); +MODULE_SCOPE int TclObjInvokeNamespace(Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[], + Tcl_Namespace *nsPtr, int flags); +MODULE_SCOPE int TclObjUnsetVar2(Tcl_Interp *interp, + Tcl_Obj *part1Ptr, Tcl_Obj *part2Ptr, int flags); +MODULE_SCOPE int TclParseBackslash(const char *src, + int numBytes, int *readPtr, char *dst); +MODULE_SCOPE int TclParseHex(const char *src, int numBytes, + Tcl_UniChar *resultPtr); +MODULE_SCOPE int TclParseNumber(Tcl_Interp *interp, Tcl_Obj *objPtr, + const char *expected, const char *bytes, + int numBytes, const char **endPtrPtr, int flags); +MODULE_SCOPE void TclParseInit(Tcl_Interp *interp, const char *string, + int numBytes, Tcl_Parse *parsePtr); +MODULE_SCOPE int TclParseAllWhiteSpace(const char *src, int numBytes); +MODULE_SCOPE int TclProcessReturn(Tcl_Interp *interp, + int code, int level, Tcl_Obj *returnOpts); +#ifndef TCL_NO_STACK_CHECK +MODULE_SCOPE int TclpGetCStackParams(int **stackBoundPtr); #endif - -EXTERN void TclExpandTokenArray _ANSI_ARGS_(( - Tcl_Parse *parsePtr)); -EXTERN int TclFileAttrsCmd _ANSI_ARGS_((Tcl_Interp *interp, - int objc, Tcl_Obj *CONST objv[])); -EXTERN int TclFileCopyCmd _ANSI_ARGS_((Tcl_Interp *interp, - int objc, Tcl_Obj *CONST objv[])) ; -EXTERN int TclFileDeleteCmd _ANSI_ARGS_((Tcl_Interp *interp, - int objc, Tcl_Obj *CONST objv[])); -EXTERN int TclFileMakeDirsCmd _ANSI_ARGS_((Tcl_Interp *interp, - int objc, Tcl_Obj *CONST objv[])) ; -EXTERN int TclFileRenameCmd _ANSI_ARGS_((Tcl_Interp *interp, - int objc, Tcl_Obj *CONST objv[])) ; -EXTERN void TclCreateLateExitHandler (Tcl_ExitProc * proc, - ClientData clientData); -EXTERN void TclDeleteLateExitHandler (Tcl_ExitProc * proc, - ClientData clientData); -EXTERN void TclFinalizeAllocSubsystem _ANSI_ARGS_((void)); -EXTERN void TclFinalizeAsync _ANSI_ARGS_((void)); -EXTERN void TclFinalizeCompilation _ANSI_ARGS_((void)); -EXTERN void TclFinalizeEncodingSubsystem _ANSI_ARGS_((void)); -EXTERN void TclFinalizeEnvironment _ANSI_ARGS_((void)); -EXTERN void TclFinalizeExecution _ANSI_ARGS_((void)); -EXTERN void TclFinalizeIOSubsystem _ANSI_ARGS_((void)); -EXTERN void TclFinalizeFilesystem _ANSI_ARGS_((void)); -EXTERN void TclResetFilesystem _ANSI_ARGS_((void)); -EXTERN void TclFinalizeLoad _ANSI_ARGS_((void)); -EXTERN void TclFinalizeLock _ANSI_ARGS_((void)); -EXTERN void TclFinalizeMemorySubsystem _ANSI_ARGS_((void)); -EXTERN void TclFinalizeNotifier _ANSI_ARGS_((void)); -EXTERN void TclFinalizeObjects _ANSI_ARGS_((void)); -EXTERN void TclFinalizePreserve _ANSI_ARGS_((void)); -EXTERN void TclFinalizeSynchronization _ANSI_ARGS_((void)); -EXTERN void TclFinalizeThreadAlloc _ANSI_ARGS_((void)); -EXTERN void TclFinalizeThreadData _ANSI_ARGS_((void)); -EXTERN int TclGetEncodingFromObj _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *objPtr, Tcl_Encoding *encodingPtr)); -#ifdef TCL_TIP280 -EXTERN void TclGetSrcInfoForPc _ANSI_ARGS_((CmdFrame* cfPtr)); +MODULE_SCOPE int TclpObjLstat(Tcl_Obj *pathPtr, Tcl_StatBuf *buf); +MODULE_SCOPE Tcl_Obj * TclpTempFileName(void); +MODULE_SCOPE Tcl_Obj * TclNewFSPathObj(Tcl_Obj *dirPtr, const char *addStrRep, + int len); +MODULE_SCOPE int TclpDeleteFile(const char *path); +MODULE_SCOPE void TclpFinalizeCondition(Tcl_Condition *condPtr); +MODULE_SCOPE void TclpFinalizeMutex(Tcl_Mutex *mutexPtr); +MODULE_SCOPE void TclpFinalizePipes(void); +MODULE_SCOPE void TclpFinalizeSockets(void); +MODULE_SCOPE int TclpThreadCreate(Tcl_ThreadId *idPtr, + Tcl_ThreadCreateProc proc, ClientData clientData, + int stackSize, int flags); +MODULE_SCOPE int TclpFindVariable(const char *name, int *lengthPtr); +MODULE_SCOPE void TclpInitLibraryPath(char **valuePtr, + int *lengthPtr, Tcl_Encoding *encodingPtr); +MODULE_SCOPE void TclpInitLock(void); +MODULE_SCOPE void TclpInitPlatform(void); +MODULE_SCOPE void TclpInitUnlock(void); +MODULE_SCOPE Tcl_Obj * TclpObjListVolumes(void); +MODULE_SCOPE void TclpMasterLock(void); +MODULE_SCOPE void TclpMasterUnlock(void); +MODULE_SCOPE int TclpMatchFiles(Tcl_Interp *interp, char *separators, + Tcl_DString *dirPtr, char *pattern, char *tail); +MODULE_SCOPE int TclpObjNormalizePath(Tcl_Interp *interp, + Tcl_Obj *pathPtr, int nextCheckpoint); +MODULE_SCOPE void TclpNativeJoinPath(Tcl_Obj *prefix, const char *joining); +MODULE_SCOPE Tcl_Obj * TclpNativeSplitPath(Tcl_Obj *pathPtr, int *lenPtr); +MODULE_SCOPE Tcl_PathType TclpGetNativePathType(Tcl_Obj *pathPtr, + int *driveNameLengthPtr, Tcl_Obj **driveNameRef); +MODULE_SCOPE int TclCrossFilesystemCopy(Tcl_Interp *interp, + Tcl_Obj *source, Tcl_Obj *target); +MODULE_SCOPE int TclpMatchInDirectory(Tcl_Interp *interp, + Tcl_Obj *resultPtr, Tcl_Obj *pathPtr, + const char *pattern, Tcl_GlobTypeData *types); +MODULE_SCOPE ClientData TclpGetNativeCwd(ClientData clientData); +MODULE_SCOPE Tcl_FSDupInternalRepProc TclNativeDupInternalRep; +MODULE_SCOPE Tcl_Obj * TclpObjLink(Tcl_Obj *pathPtr, Tcl_Obj *toPtr, + int linkType); +MODULE_SCOPE int TclpObjChdir(Tcl_Obj *pathPtr); +MODULE_SCOPE Tcl_Obj * TclPathPart(Tcl_Interp *interp, Tcl_Obj *pathPtr, + Tcl_PathPart portion); +#ifndef TclpPanic +MODULE_SCOPE void TclpPanic(const char *format, ...); #endif -EXTERN int TclGlob _ANSI_ARGS_((Tcl_Interp *interp, - char *pattern, Tcl_Obj *unquotedPrefix, - int globFlags, Tcl_GlobTypeData* types)); -EXTERN void TclInitAlloc _ANSI_ARGS_((void)); -EXTERN void TclInitDbCkalloc _ANSI_ARGS_((void)); -EXTERN void TclInitEncodingSubsystem _ANSI_ARGS_((void)); -EXTERN void TclInitIOSubsystem _ANSI_ARGS_((void)); -EXTERN void TclInitNamespaceSubsystem _ANSI_ARGS_((void)); -EXTERN void TclInitNotifier _ANSI_ARGS_((void)); -EXTERN void TclInitObjSubsystem _ANSI_ARGS_((void)); -EXTERN void TclInitSubsystems _ANSI_ARGS_((CONST char *argv0)); -EXTERN int TclIsLocalScalar _ANSI_ARGS_((CONST char *src, - int len)); -EXTERN int TclJoinThread _ANSI_ARGS_((Tcl_ThreadId id, - int* result)); -EXTERN Tcl_Obj * TclLindexList _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj* listPtr, - Tcl_Obj* argPtr )); -EXTERN Tcl_Obj * TclLindexFlat _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj* listPtr, - int indexCount, - Tcl_Obj *CONST indexArray[] - )); -EXTERN Tcl_Obj * TclLsetList _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj* listPtr, - Tcl_Obj* indexPtr, - Tcl_Obj* valuePtr - )); -EXTERN Tcl_Obj * TclLsetFlat _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Obj* listPtr, - int indexCount, - Tcl_Obj *CONST indexArray[], - Tcl_Obj* valuePtr - )); -EXTERN int TclParseBackslash _ANSI_ARGS_((CONST char *src, - int numBytes, int *readPtr, char *dst)); -EXTERN int TclParseHex _ANSI_ARGS_((CONST char *src, int numBytes, - Tcl_UniChar *resultPtr)); -EXTERN int TclParseInteger _ANSI_ARGS_((CONST char *string, - int numBytes)); -EXTERN int TclParseWhiteSpace _ANSI_ARGS_((CONST char *src, - int numBytes, Tcl_Parse *parsePtr, char *typePtr)); -#ifdef TCL_TIP280 -EXTERN int TclWordKnownAtCompileTime _ANSI_ARGS_((Tcl_Token* token)); +MODULE_SCOPE char * TclpReadlink(const char *fileName, + Tcl_DString *linkPtr); +#ifndef TclpReleaseFile +MODULE_SCOPE void TclpReleaseFile(TclFile file); #endif -EXTERN int TclpObjAccess _ANSI_ARGS_((Tcl_Obj *filename, - int mode)); -EXTERN int TclpObjLstat _ANSI_ARGS_((Tcl_Obj *pathPtr, - Tcl_StatBuf *buf)); -EXTERN int TclpCheckStackSpace _ANSI_ARGS_((void)); -EXTERN Tcl_Obj* TclpTempFileName _ANSI_ARGS_((void)); -EXTERN Tcl_Obj* TclNewFSPathObj _ANSI_ARGS_((Tcl_Obj *dirPtr, - CONST char *addStrRep, int len)); -EXTERN int TclpDeleteFile _ANSI_ARGS_((CONST char *path)); -EXTERN void TclpFinalizeCondition _ANSI_ARGS_(( - Tcl_Condition *condPtr)); -EXTERN void TclpFinalizeMutex _ANSI_ARGS_((Tcl_Mutex *mutexPtr)); -EXTERN void TclpFinalizePipes _ANSI_ARGS_((void)); -EXTERN void TclpFinalizeSockets _ANSI_ARGS_((void)); -EXTERN void TclpFinalizeThreadData _ANSI_ARGS_(( - Tcl_ThreadDataKey *keyPtr)); -EXTERN void TclpFinalizeThreadDataKey _ANSI_ARGS_(( - Tcl_ThreadDataKey *keyPtr)); -EXTERN char * TclpFindExecutable _ANSI_ARGS_(( - CONST char *argv0)); -EXTERN int TclpFindVariable _ANSI_ARGS_((CONST char *name, - int *lengthPtr)); -EXTERN int TclpInitLibraryPath _ANSI_ARGS_((CONST char *argv0)); -EXTERN void TclpInitLock _ANSI_ARGS_((void)); -EXTERN void TclpInitPlatform _ANSI_ARGS_((void)); -EXTERN void TclpInitUnlock _ANSI_ARGS_((void)); -EXTERN int TclpLoadFile _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *pathPtr, - CONST char *sym1, CONST char *sym2, - Tcl_PackageInitProc **proc1Ptr, - Tcl_PackageInitProc **proc2Ptr, - ClientData *clientDataPtr, - Tcl_FSUnloadFileProc **unloadProcPtr)); -EXTERN Tcl_Obj* TclpObjListVolumes _ANSI_ARGS_((void)); -EXTERN void TclpMasterLock _ANSI_ARGS_((void)); -EXTERN void TclpMasterUnlock _ANSI_ARGS_((void)); -EXTERN int TclpMatchFiles _ANSI_ARGS_((Tcl_Interp *interp, - char *separators, Tcl_DString *dirPtr, - char *pattern, char *tail)); -EXTERN int TclpObjNormalizePath _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *pathPtr, int nextCheckpoint)); -EXTERN int TclpObjCreateDirectory _ANSI_ARGS_((Tcl_Obj *pathPtr)); -EXTERN void TclpNativeJoinPath _ANSI_ARGS_((Tcl_Obj *prefix, - char *joining)); -EXTERN Tcl_Obj* TclpNativeSplitPath _ANSI_ARGS_((Tcl_Obj *pathPtr, - int *lenPtr)); -EXTERN Tcl_PathType TclpGetNativePathType _ANSI_ARGS_((Tcl_Obj *pathObjPtr, - int *driveNameLengthPtr, Tcl_Obj **driveNameRef)); -EXTERN int TclCrossFilesystemCopy _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *source, Tcl_Obj *target)); -EXTERN int TclpObjDeleteFile _ANSI_ARGS_((Tcl_Obj *pathPtr)); -EXTERN int TclpObjCopyDirectory _ANSI_ARGS_((Tcl_Obj *srcPathPtr, - Tcl_Obj *destPathPtr, Tcl_Obj **errorPtr)); -EXTERN int TclpObjCopyFile _ANSI_ARGS_((Tcl_Obj *srcPathPtr, - Tcl_Obj *destPathPtr)); -EXTERN int TclpObjRemoveDirectory _ANSI_ARGS_((Tcl_Obj *pathPtr, - int recursive, Tcl_Obj **errorPtr)); -EXTERN int TclpObjRenameFile _ANSI_ARGS_((Tcl_Obj *srcPathPtr, - Tcl_Obj *destPathPtr)); -EXTERN int TclpMatchInDirectory _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *resultPtr, Tcl_Obj *pathPtr, - CONST char *pattern, Tcl_GlobTypeData *types)); -EXTERN Tcl_Obj* TclpObjGetCwd _ANSI_ARGS_((Tcl_Interp *interp)); -EXTERN Tcl_FSDupInternalRepProc TclNativeDupInternalRep; -EXTERN Tcl_Obj* TclpObjLink _ANSI_ARGS_((Tcl_Obj *pathPtr, - Tcl_Obj *toPtr, int linkType)); -EXTERN int TclpObjChdir _ANSI_ARGS_((Tcl_Obj *pathPtr)); -EXTERN Tcl_Obj* TclFileDirname _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj*pathPtr)); -EXTERN int TclpObjStat _ANSI_ARGS_((Tcl_Obj *pathPtr, Tcl_StatBuf *buf)); -EXTERN Tcl_Channel TclpOpenFileChannel _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *pathPtr, int mode, - int permissions)); -EXTERN void TclpPanic _ANSI_ARGS_(TCL_VARARGS(CONST char *, - format)); -EXTERN char * TclpReadlink _ANSI_ARGS_((CONST char *fileName, - Tcl_DString *linkPtr)); -EXTERN void TclpReleaseFile _ANSI_ARGS_((TclFile file)); -EXTERN void TclpSetVariables _ANSI_ARGS_((Tcl_Interp *interp)); -EXTERN void TclpUnloadFile _ANSI_ARGS_((Tcl_LoadHandle loadHandle)); -EXTERN VOID * TclpThreadDataKeyGet _ANSI_ARGS_(( - Tcl_ThreadDataKey *keyPtr)); -EXTERN void TclpThreadDataKeyInit _ANSI_ARGS_(( - Tcl_ThreadDataKey *keyPtr)); -EXTERN void TclpThreadDataKeySet _ANSI_ARGS_(( - Tcl_ThreadDataKey *keyPtr, VOID *data)); -EXTERN int TclpThreadCreate _ANSI_ARGS_(( - Tcl_ThreadId *idPtr, - Tcl_ThreadCreateProc proc, - ClientData clientData, - int stackSize, int flags)); -EXTERN void TclpThreadExit _ANSI_ARGS_((int status)); -EXTERN void TclRememberCondition _ANSI_ARGS_((Tcl_Condition *mutex)); -EXTERN void TclRememberDataKey _ANSI_ARGS_((Tcl_ThreadDataKey *mutex)); -EXTERN VOID TclRememberJoinableThread _ANSI_ARGS_((Tcl_ThreadId id)); -EXTERN void TclRememberMutex _ANSI_ARGS_((Tcl_Mutex *mutex)); -EXTERN VOID TclSignalExitThread _ANSI_ARGS_((Tcl_ThreadId id, - int result)); -EXTERN void TclTransferResult _ANSI_ARGS_((Tcl_Interp *sourceInterp, - int result, Tcl_Interp *targetInterp)); -EXTERN Tcl_Obj* TclpNativeToNormalized - _ANSI_ARGS_((ClientData clientData)); -EXTERN Tcl_Obj* TclpFilesystemPathType - _ANSI_ARGS_((Tcl_Obj* pathObjPtr)); -EXTERN Tcl_PackageInitProc* TclpFindSymbol _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_LoadHandle loadHandle, CONST char *symbol)); -EXTERN int TclpDlopen _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *pathPtr, - Tcl_LoadHandle *loadHandle, - Tcl_FSUnloadFileProc **unloadProcPtr)); -EXTERN int TclpUtime _ANSI_ARGS_((Tcl_Obj *pathPtr, - struct utimbuf *tval)); - +MODULE_SCOPE void TclpSetInterfaces(void); +MODULE_SCOPE void TclpSetVariables(Tcl_Interp *interp); +MODULE_SCOPE void TclpUnloadFile(Tcl_LoadHandle loadHandle); +MODULE_SCOPE void * TclpThreadDataKeyGet(Tcl_ThreadDataKey *keyPtr); +MODULE_SCOPE void TclpThreadDataKeySet(Tcl_ThreadDataKey *keyPtr, + void *data); +MODULE_SCOPE void TclpThreadExit(int status); +MODULE_SCOPE size_t TclpThreadGetStackSize(void); +MODULE_SCOPE void TclRememberCondition(Tcl_Condition *mutex); +MODULE_SCOPE void TclRememberJoinableThread(Tcl_ThreadId id); +MODULE_SCOPE void TclRememberMutex(Tcl_Mutex *mutex); +MODULE_SCOPE void TclRemoveScriptLimitCallbacks(Tcl_Interp *interp); +MODULE_SCOPE int TclReToGlob(Tcl_Interp *interp, const char *reStr, + int reStrLen, Tcl_DString *dsPtr, int *flagsPtr); +MODULE_SCOPE int TclScanElement(CONST char *string, int length, + int *flagPtr); +MODULE_SCOPE void TclSetBgErrorHandler(Tcl_Interp *interp, + Tcl_Obj *cmdPrefix); +MODULE_SCOPE void TclSetBignumIntRep(Tcl_Obj *objPtr, + mp_int *bignumValue); +MODULE_SCOPE void TclSetCmdNameObj(Tcl_Interp *interp, Tcl_Obj *objPtr, + Command *cmdPtr); +MODULE_SCOPE void TclSetProcessGlobalValue(ProcessGlobalValue *pgvPtr, + Tcl_Obj *newValue, Tcl_Encoding encoding); +MODULE_SCOPE void TclSignalExitThread(Tcl_ThreadId id, int result); +MODULE_SCOPE void * TclStackRealloc(Tcl_Interp *interp, void *ptr, + int numBytes); +MODULE_SCOPE int TclStringMatch(const char *str, int strLen, + const char *pattern, int ptnLen, int flags); +MODULE_SCOPE int TclStringMatchObj(Tcl_Obj *stringObj, + Tcl_Obj *patternObj, int flags); +MODULE_SCOPE Tcl_Obj * TclStringObjReverse(Tcl_Obj *objPtr); +MODULE_SCOPE int TclSubstTokens(Tcl_Interp *interp, Tcl_Token *tokenPtr, + int count, int *tokensLeftPtr, int line, + int *clNextOuter, CONST char *outerScript); +MODULE_SCOPE void TclTransferResult(Tcl_Interp *sourceInterp, int result, + Tcl_Interp *targetInterp); +MODULE_SCOPE int TclTrimLeft(const char *bytes, int numBytes, + const char *trim, int numTrim); +MODULE_SCOPE int TclTrimRight(const char *bytes, int numBytes, + const char *trim, int numTrim); +MODULE_SCOPE Tcl_Obj * TclpNativeToNormalized(ClientData clientData); +MODULE_SCOPE Tcl_Obj * TclpFilesystemPathType(Tcl_Obj *pathPtr); +MODULE_SCOPE Tcl_PackageInitProc *TclpFindSymbol(Tcl_Interp *interp, + Tcl_LoadHandle loadHandle, const char *symbol); +MODULE_SCOPE int TclpDlopen(Tcl_Interp *interp, Tcl_Obj *pathPtr, + Tcl_LoadHandle *loadHandle, + Tcl_FSUnloadFileProc **unloadProcPtr); +MODULE_SCOPE int TclpUtime(Tcl_Obj *pathPtr, struct utimbuf *tval); #ifdef TCL_LOAD_FROM_MEMORY -EXTERN void* TclpLoadMemoryGetBuffer _ANSI_ARGS_(( - Tcl_Interp *interp, int size)); -EXTERN int TclpLoadMemory _ANSI_ARGS_((Tcl_Interp *interp, - void *buffer, int size, int codeSize, - Tcl_LoadHandle *loadHandle, - Tcl_FSUnloadFileProc **unloadProcPtr)); +MODULE_SCOPE void * TclpLoadMemoryGetBuffer(Tcl_Interp *interp, int size); +MODULE_SCOPE int TclpLoadMemory(Tcl_Interp *interp, void *buffer, + int size, int codeSize, Tcl_LoadHandle *loadHandle, + Tcl_FSUnloadFileProc **unloadProcPtr); #endif +MODULE_SCOPE void TclInitThreadStorage(void); +MODULE_SCOPE void TclpFinalizeThreadDataThread(void); +MODULE_SCOPE void TclFinalizeThreadStorage(void); +#ifdef TCL_WIDE_CLICKS +MODULE_SCOPE Tcl_WideInt TclpGetWideClicks(void); +MODULE_SCOPE double TclpWideClicksToNanoseconds(Tcl_WideInt clicks); +#endif +MODULE_SCOPE Tcl_Obj * TclDisassembleByteCodeObj(Tcl_Obj *objPtr); /* *---------------------------------------------------------------- @@ -2137,160 +2769,266 @@ EXTERN int TclpLoadMemory _ANSI_ARGS_((Tcl_Interp *interp, *---------------------------------------------------------------- */ -EXTERN int Tcl_AfterObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_AppendObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ArrayObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_BinaryObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_BreakObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_CaseObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_CatchObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_CdObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ClockObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_CloseObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ConcatObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ContinueObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_EncodingObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_EofObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ErrorObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_EvalObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ExecObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ExitObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ExprObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_FblockedObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_FconfigureObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_FcopyObjCmd _ANSI_ARGS_((ClientData dummy, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_FileObjCmd _ANSI_ARGS_((ClientData dummy, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_FileEventObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_FlushObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ForObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ForeachObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_FormatObjCmd _ANSI_ARGS_((ClientData dummy, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_GetsObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_GlobalObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_GlobObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_IfObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_IncrObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_InfoObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_InterpObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int argc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_JoinObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LappendObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LindexObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LinsertObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LlengthObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ListObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LoadObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LrangeObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LreplaceObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LsearchObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LsetObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp* interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_LsortObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_NamespaceObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_OpenObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_PackageObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_PidObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_PutsObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_PwdObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ReadObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_RegexpObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_RegsubObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_RenameObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ReturnObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_ScanObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_SeekObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_SetObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_SplitObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_SocketObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_SourceObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_StringObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_SubstObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_SwitchObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_TellObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_TimeObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_TraceObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_UnsetObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_UpdateObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_UplevelObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_UpvarObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_VariableObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_VwaitObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); -EXTERN int Tcl_WhileObjCmd _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); +MODULE_SCOPE int Tcl_AfterObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_AppendObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ApplyObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ArrayObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_BinaryObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_BreakObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_CaseObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_CatchObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_CdObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE Tcl_Command TclInitChanCmd(Tcl_Interp *interp); +MODULE_SCOPE int TclChanCreateObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclChanPostEventObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE void TclClockInit(Tcl_Interp *interp); +MODULE_SCOPE int TclClockOldscanObjCmd( + ClientData clientData, Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_CloseObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ConcatObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ContinueObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE Tcl_TimerToken TclCreateAbsoluteTimerHandler( + Tcl_Time *timePtr, Tcl_TimerProc *proc, + ClientData clientData); +MODULE_SCOPE int TclDefaultBgErrorHandlerObjCmd( + ClientData clientData, Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE Tcl_Command TclInitDictCmd(Tcl_Interp *interp); +MODULE_SCOPE int Tcl_DisassembleObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_EncodingObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_EofObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ErrorObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_EvalObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ExecObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ExitObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ExprObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_FblockedObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_FconfigureObjCmd( + ClientData clientData, Tcl_Interp *interp, + int objc, Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_FcopyObjCmd(ClientData dummy, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_FileObjCmd(ClientData dummy, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_FileEventObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_FlushObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ForObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ForeachObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_FormatObjCmd(ClientData dummy, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_GetsObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_GlobalObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_GlobObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_IfObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_IncrObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE Tcl_Command TclInitInfoCmd(Tcl_Interp *interp); +MODULE_SCOPE int Tcl_InterpObjCmd(ClientData clientData, + Tcl_Interp *interp, int argc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_JoinObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LappendObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LassignObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LindexObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LinsertObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LlengthObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ListObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LoadObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LrangeObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LrepeatObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LreplaceObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LreverseObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LsearchObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LsetObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_LsortObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_NamespaceObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_OpenObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_PackageObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_PidObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_PutsObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_PwdObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ReadObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_RegexpObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_RegsubObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_RenameObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ReturnObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_ScanObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_SeekObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_SetObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_SplitObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_SocketObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_SourceObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE Tcl_Command TclInitStringCmd(Tcl_Interp *interp); +MODULE_SCOPE int Tcl_SubstObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_SwitchObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_TellObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_TimeObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_TraceObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_UnloadObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_UnsetObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_UpdateObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_UplevelObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_UpvarObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_VariableObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_VwaitObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int Tcl_WhileObjCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); /* *---------------------------------------------------------------- @@ -2298,88 +3036,327 @@ EXTERN int Tcl_WhileObjCmd _ANSI_ARGS_((ClientData clientData, *---------------------------------------------------------------- */ -EXTERN int TclCompileAppendCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileBreakCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileCatchCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileContinueCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileExprCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileForCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileForeachCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileIfCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileIncrCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileLappendCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileLindexCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileListCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileLlengthCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileLsetCmd _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Parse* parsePtr, struct CompileEnv* envPtr)); -EXTERN int TclCompileRegexpCmd _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Parse* parsePtr, struct CompileEnv* envPtr)); -EXTERN int TclCompileReturnCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileSetCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileStringCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); -EXTERN int TclCompileWhileCmd _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Parse *parsePtr, struct CompileEnv *envPtr)); - -/* - * Functions defined in generic/tclVar.c and currenttly exported only - * for use by the bytecode compiler and engine. Some of these could later - * be placed in the public interface. - */ - -EXTERN Var * TclLookupArrayElement _ANSI_ARGS_((Tcl_Interp *interp, - CONST char *arrayName, CONST char *elName, CONST int flags, - CONST char *msg, CONST int createPart1, - CONST int createPart2, Var *arrayPtr)); -EXTERN Var * TclObjLookupVar _ANSI_ARGS_((Tcl_Interp *interp, - Tcl_Obj *part1Ptr, CONST char *part2, int flags, - CONST char *msg, CONST int createPart1, - CONST int createPart2, Var **arrayPtrPtr)); -EXTERN Tcl_Obj *TclPtrGetVar _ANSI_ARGS_((Tcl_Interp *interp, Var *varPtr, - Var *arrayPtr, CONST char *part1, CONST char *part2, - CONST int flags)); -EXTERN Tcl_Obj *TclPtrSetVar _ANSI_ARGS_((Tcl_Interp *interp, Var *varPtr, - Var *arrayPtr, CONST char *part1, CONST char *part2, - Tcl_Obj *newValuePtr, CONST int flags)); -EXTERN Tcl_Obj *TclPtrIncrVar _ANSI_ARGS_((Tcl_Interp *interp, Var *varPtr, - Var *arrayPtr, CONST char *part1, CONST char *part2, - CONST long i, CONST int flags)); +MODULE_SCOPE int TclCompileAppendCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileBreakCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileCatchCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileContinueCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileDictAppendCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileDictForCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileDictGetCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileDictIncrCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileDictLappendCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileDictSetCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileDictUpdateCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileEnsemble(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileExprCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileForCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileForeachCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileGlobalCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileIfCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileInfoExistsCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileIncrCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileLappendCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileLassignCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileLindexCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileListCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileLlengthCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileLsetCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileNamespaceCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileNoOp(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileRegexpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileReturnCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileSetCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileStringCmpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileStringEqualCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileStringIndexCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileStringLenCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileStringMatchCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileSwitchCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileUpvarCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileVariableCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclCompileWhileCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); + +MODULE_SCOPE int TclInvertOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileInvertOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclNotOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileNotOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclAddOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileAddOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclMulOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileMulOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclAndOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileAndOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclOrOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileOrOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclXorOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileXorOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclPowOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompilePowOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclLshiftOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileLshiftOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclRshiftOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileRshiftOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclModOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileModOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclNeqOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileNeqOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclStrneqOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileStrneqOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclInOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileInOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclNiOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileNiOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclMinusOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileMinusOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclDivOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileDivOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclLessOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileLessOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclLeqOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileLeqOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclGreaterOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileGreaterOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclGeqOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileGeqOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclEqOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileEqOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); +MODULE_SCOPE int TclStreqOpCmd(ClientData clientData, + Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[]); +MODULE_SCOPE int TclCompileStreqOpCmd(Tcl_Interp *interp, + Tcl_Parse *parsePtr, Command *cmdPtr, + struct CompileEnv *envPtr); + +/* + * Functions defined in generic/tclVar.c and currenttly exported only for use + * by the bytecode compiler and engine. Some of these could later be placed in + * the public interface. + */ + +MODULE_SCOPE Var * TclObjLookupVarEx(Tcl_Interp * interp, + Tcl_Obj *part1Ptr, Tcl_Obj *part2Ptr, int flags, + const char *msg, const int createPart1, + const int createPart2, Var **arrayPtrPtr); +MODULE_SCOPE Var * TclLookupArrayElement(Tcl_Interp *interp, + Tcl_Obj *arrayNamePtr, Tcl_Obj *elNamePtr, + const int flags, const char *msg, + const int createPart1, const int createPart2, + Var *arrayPtr, int index); +MODULE_SCOPE Tcl_Obj * TclPtrGetVar(Tcl_Interp *interp, + Var *varPtr, Var *arrayPtr, Tcl_Obj *part1Ptr, + Tcl_Obj *part2Ptr, const int flags, int index); +MODULE_SCOPE Tcl_Obj * TclPtrSetVar(Tcl_Interp *interp, + Var *varPtr, Var *arrayPtr, Tcl_Obj *part1Ptr, + Tcl_Obj *part2Ptr, Tcl_Obj *newValuePtr, + const int flags, int index); +MODULE_SCOPE Tcl_Obj * TclPtrIncrObjVar(Tcl_Interp *interp, + Var *varPtr, Var *arrayPtr, Tcl_Obj *part1Ptr, + Tcl_Obj *part2Ptr, Tcl_Obj *incrPtr, + const int flags, int index); +MODULE_SCOPE int TclPtrObjMakeUpvar(Tcl_Interp *interp, Var *otherPtr, + Tcl_Obj *myNamePtr, int myFlags, int index); +MODULE_SCOPE void TclInvalidateNsPath(Namespace *nsPtr); + +/* + * The new extended interface to the variable traces. + */ + +MODULE_SCOPE int TclObjCallVarTraces(Interp *iPtr, Var *arrayPtr, + Var *varPtr, Tcl_Obj *part1Ptr, Tcl_Obj *part2Ptr, + int flags, int leaveErrMsg, int index); + +/* + * So tclObj.c and tclDictObj.c can share these implementations. + */ + +MODULE_SCOPE int TclCompareObjKeys(void *keyPtr, Tcl_HashEntry *hPtr); +MODULE_SCOPE void TclFreeObjEntry(Tcl_HashEntry *hPtr); +MODULE_SCOPE unsigned TclHashObjKey(Tcl_HashTable *tablePtr, void *keyPtr); /* *---------------------------------------------------------------- * Macros used by the Tcl core to create and release Tcl objects. * TclNewObj(objPtr) creates a new object denoting an empty string. - * TclDecrRefCount(objPtr) decrements the object's reference count, - * and frees the object if its reference count is zero. - * These macros are inline versions of Tcl_NewObj() and - * Tcl_DecrRefCount(). Notice that the names differ in not having - * a "_" after the "Tcl". Notice also that these macros reference - * their argument more than once, so you should avoid calling them - * with an expression that is expensive to compute or has - * side effects. The ANSI C "prototypes" for these macros are: + * TclDecrRefCount(objPtr) decrements the object's reference count, and frees + * the object if its reference count is zero. These macros are inline versions + * of Tcl_NewObj() and Tcl_DecrRefCount(). Notice that the names differ in not + * having a "_" after the "Tcl". Notice also that these macros reference their + * argument more than once, so you should avoid calling them with an + * expression that is expensive to compute or has side effects. The ANSI C + * "prototypes" for these macros are: * - * EXTERN void TclNewObj _ANSI_ARGS_((Tcl_Obj *objPtr)); - * EXTERN void TclDecrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr)); + * MODULE_SCOPE void TclNewObj(Tcl_Obj *objPtr); + * MODULE_SCOPE void TclDecrRefCount(Tcl_Obj *objPtr); * - * These macros are defined in terms of two macros that depend on - * memory allocator in use: TclAllocObjStorage, TclFreeObjStorage. - * They are defined below. + * These macros are defined in terms of two macros that depend on memory + * allocator in use: TclAllocObjStorage, TclFreeObjStorage. They are defined + * below. *---------------------------------------------------------------- */ @@ -2406,94 +3383,78 @@ EXTERN Tcl_Obj *TclPtrIncrVar _ANSI_ARGS_((Tcl_Interp *interp, Var *varPtr, # define TclIncrObjsFreed() #endif /* TCL_COMPILE_STATS */ -#define TclNewObj(objPtr) \ - TclAllocObjStorage(objPtr); \ +#ifndef TCL_MEM_DEBUG +# define TclNewObj(objPtr) \ TclIncrObjsAllocated(); \ + TclAllocObjStorage(objPtr); \ (objPtr)->refCount = 0; \ (objPtr)->bytes = tclEmptyStringRep; \ (objPtr)->length = 0; \ (objPtr)->typePtr = NULL; \ TCL_DTRACE_OBJ_CREATE(objPtr) - -#ifdef TCL_MEM_DEBUG -# define TclDecrRefCount(objPtr) \ - Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__) -#else -# define TclDecrRefCount(objPtr) \ - if (--(objPtr)->refCount <= 0) { \ - TCL_DTRACE_OBJ_FREE(objPtr); \ - if (((objPtr)->typePtr != NULL) \ - && ((objPtr)->typePtr->freeIntRepProc != NULL)) { \ - (objPtr)->typePtr->freeIntRepProc(objPtr); \ - } \ - if (((objPtr)->bytes != NULL) \ - && ((objPtr)->bytes != tclEmptyStringRep)) { \ - ckfree((char *) (objPtr)->bytes); \ +/* + * Invalidate the string rep first so we can use the bytes value for our + * pointer chain, and signal an obj deletion (as opposed to shimmering) with + * 'length == -1'. + * Use empty 'if ; else' to handle use in unbraced outer if/else conditions. + */ + +# define TclDecrRefCount(objPtr) \ + if (--(objPtr)->refCount > 0) ; else { \ + if (!(objPtr)->typePtr || !(objPtr)->typePtr->freeIntRepProc) { \ + TCL_DTRACE_OBJ_FREE(objPtr); \ + if ((objPtr)->bytes \ + && ((objPtr)->bytes != tclEmptyStringRep)) { \ + ckfree((char *) (objPtr)->bytes); \ + } \ + (objPtr)->length = -1; \ + TclFreeObjStorage(objPtr); \ + TclIncrObjsFreed(); \ + } else { \ + TclFreeObj(objPtr); \ } \ - TclFreeObjStorage(objPtr); \ - TclIncrObjsFreed(); \ } -#endif - -#ifdef TCL_MEM_DEBUG -# define TclAllocObjStorage(objPtr) \ - (objPtr) = (Tcl_Obj *) \ - Tcl_DbCkalloc(sizeof(Tcl_Obj), __FILE__, __LINE__) -# define TclFreeObjStorage(objPtr) \ - if ((objPtr)->refCount < -1) { \ - panic("Reference count for %lx was negative: %s line %d", \ - (objPtr), __FILE__, __LINE__); \ - } \ - ckfree((char *) (objPtr)) - -# define TclDbNewObj(objPtr, file, line) \ - (objPtr) = (Tcl_Obj *) Tcl_DbCkalloc(sizeof(Tcl_Obj), (file), (line)); \ - (objPtr)->refCount = 0; \ - (objPtr)->bytes = tclEmptyStringRep; \ - (objPtr)->length = 0; \ - (objPtr)->typePtr = NULL; \ - TclIncrObjsAllocated(); \ - TCL_DTRACE_OBJ_CREATE(objPtr) - - -#elif defined(PURIFY) +#if defined(PURIFY) /* * The PURIFY mode is like the regular mode, but instead of doing block * Tcl_Obj allocation and keeping a freed list for efficiency, it always - * allocates and frees a single Tcl_Obj so that tools like Purify can - * better track memory leaks + * allocates and frees a single Tcl_Obj so that tools like Purify can better + * track memory leaks. */ # define TclAllocObjStorage(objPtr) \ - (objPtr) = (Tcl_Obj *) Tcl_Ckalloc(sizeof(Tcl_Obj)) + (objPtr) = (Tcl_Obj *) Tcl_Alloc(sizeof(Tcl_Obj)) # define TclFreeObjStorage(objPtr) \ - ckfree((char *) (objPtr)) + ckfree((char *) (objPtr)) +#undef USE_THREAD_ALLOC #elif defined(TCL_THREADS) && defined(USE_THREAD_ALLOC) /* - * The TCL_THREADS mode is like the regular mode but allocates Tcl_Obj's - * from per-thread caches. + * The TCL_THREADS mode is like the regular mode but allocates Tcl_Obj's from + * per-thread caches. */ -EXTERN Tcl_Obj *TclThreadAllocObj _ANSI_ARGS_((void)); -EXTERN void TclThreadFreeObj _ANSI_ARGS_((Tcl_Obj *)); -EXTERN void TclFreeAllocCache _ANSI_ARGS_((void *)); -EXTERN void TclpFreeAllocMutex _ANSI_ARGS_((Tcl_Mutex* mutex)); -EXTERN void TclpFreeAllocCache _ANSI_ARGS_((void *)); - +MODULE_SCOPE Tcl_Obj * TclThreadAllocObj(void); +MODULE_SCOPE void TclThreadFreeObj(Tcl_Obj *); +MODULE_SCOPE Tcl_Mutex *TclpNewAllocMutex(void); +MODULE_SCOPE void TclFreeAllocCache(void *); +MODULE_SCOPE void * TclpGetAllocCache(void); +MODULE_SCOPE void TclpSetAllocCache(void *); +MODULE_SCOPE void TclpFreeAllocMutex(Tcl_Mutex *mutex); +MODULE_SCOPE void TclpFreeAllocCache(void *); # define TclAllocObjStorage(objPtr) \ - (objPtr) = TclThreadAllocObj() + (objPtr) = TclThreadAllocObj() # define TclFreeObjStorage(objPtr) \ - TclThreadFreeObj((objPtr)) + TclThreadFreeObj((objPtr)) -#else /* not TCL_MEM_DEBUG */ +#else /* not PURIFY or USE_THREAD_ALLOC */ #if defined(USE_TCLALLOC) && USE_TCLALLOC MODULE_SCOPE void TclFinalizeAllocSubsystem(); @@ -2504,38 +3465,60 @@ EXTERN void TclpFreeAllocCache _ANSI_ARGS_((void *)); #ifdef TCL_THREADS /* declared in tclObj.c */ -extern Tcl_Mutex tclObjMutex; +MODULE_SCOPE Tcl_Mutex tclObjMutex; #endif # define TclAllocObjStorage(objPtr) \ - Tcl_MutexLock(&tclObjMutex); \ - if (tclFreeObjList == NULL) { \ - TclAllocateFreeObjects(); \ - } \ - (objPtr) = tclFreeObjList; \ - tclFreeObjList = (Tcl_Obj *) \ - tclFreeObjList->internalRep.otherValuePtr; \ - Tcl_MutexUnlock(&tclObjMutex) + Tcl_MutexLock(&tclObjMutex); \ + if (tclFreeObjList == NULL) { \ + TclAllocateFreeObjects(); \ + } \ + (objPtr) = tclFreeObjList; \ + tclFreeObjList = (Tcl_Obj *) \ + tclFreeObjList->internalRep.twoPtrValue.ptr1; \ + Tcl_MutexUnlock(&tclObjMutex) # define TclFreeObjStorage(objPtr) \ - Tcl_MutexLock(&tclObjMutex); \ - (objPtr)->internalRep.otherValuePtr = (VOID *) tclFreeObjList; \ - tclFreeObjList = (objPtr); \ - Tcl_MutexUnlock(&tclObjMutex) + Tcl_MutexLock(&tclObjMutex); \ + (objPtr)->internalRep.twoPtrValue.ptr1 = (void *) tclFreeObjList; \ + tclFreeObjList = (objPtr); \ + Tcl_MutexUnlock(&tclObjMutex) +#endif + +#else /* TCL_MEM_DEBUG */ +MODULE_SCOPE void TclDbInitNewObj(Tcl_Obj *objPtr, CONST char *file, + int line); + +# define TclDbNewObj(objPtr, file, line) \ + TclIncrObjsAllocated(); \ + (objPtr) = (Tcl_Obj *) Tcl_DbCkalloc(sizeof(Tcl_Obj), (file), (line)); \ + TclDbInitNewObj((objPtr), (file), (line)); \ + TCL_DTRACE_OBJ_CREATE(objPtr) +# define TclNewObj(objPtr) \ + TclDbNewObj(objPtr, __FILE__, __LINE__); + +# define TclDecrRefCount(objPtr) \ + Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__) + +# define TclNewListObjDirect(objc, objv) \ + TclDbNewListObjDirect(objc, objv, __FILE__, __LINE__) + +#undef USE_THREAD_ALLOC #endif /* TCL_MEM_DEBUG */ /* *---------------------------------------------------------------- - * Macro used by the Tcl core to set a Tcl_Obj's string representation - * to a copy of the "len" bytes starting at "bytePtr". This code - * works even if the byte array contains NULLs as long as the length - * is correct. Because "len" is referenced multiple times, it should - * be as simple an expression as possible. The ANSI C "prototype" for - * this macro is: + * Macro used by the Tcl core to set a Tcl_Obj's string representation to a + * copy of the "len" bytes starting at "bytePtr". This code works even if the + * byte array contains NULLs as long as the length is correct. Because "len" + * is referenced multiple times, it should be as simple an expression as + * possible. The ANSI C "prototype" for this macro is: * - * EXTERN void TclInitStringRep _ANSI_ARGS_((Tcl_Obj *objPtr, - * char *bytePtr, int len)); + * MODULE_SCOPE void TclInitStringRep(Tcl_Obj *objPtr, char *bytePtr, int len); + * + * This macro should only be called on an unshared objPtr where + * objPtr->typePtr->freeIntRepProc == NULL *---------------------------------------------------------------- */ @@ -2545,7 +3528,7 @@ extern Tcl_Mutex tclObjMutex; (objPtr)->length = 0; \ } else { \ (objPtr)->bytes = (char *) ckalloc((unsigned) ((len) + 1)); \ - memcpy((VOID *) (objPtr)->bytes, (VOID *) (bytePtr), \ + memcpy((void *) (objPtr)->bytes, (void *) (bytePtr), \ (unsigned) (len)); \ (objPtr)->bytes[len] = '\0'; \ (objPtr)->length = (len); \ @@ -2553,80 +3536,400 @@ extern Tcl_Mutex tclObjMutex; /* *---------------------------------------------------------------- - * Macro used by the Tcl core to get the string representation's - * byte array pointer from a Tcl_Obj. This is an inline version - * of Tcl_GetString(). The macro's expression result is the string - * rep's byte pointer which might be NULL. The bytes referenced by - * this pointer must not be modified by the caller. - * The ANSI C "prototype" for this macro is: + * Macro used by the Tcl core to get the string representation's byte array + * pointer from a Tcl_Obj. This is an inline version of Tcl_GetString(). The + * macro's expression result is the string rep's byte pointer which might be + * NULL. The bytes referenced by this pointer must not be modified by the + * caller. The ANSI C "prototype" for this macro is: * - * EXTERN char * TclGetString _ANSI_ARGS_((Tcl_Obj *objPtr)); + * MODULE_SCOPE char * TclGetString(Tcl_Obj *objPtr); *---------------------------------------------------------------- */ #define TclGetString(objPtr) \ ((objPtr)->bytes? (objPtr)->bytes : Tcl_GetString((objPtr))) +#define TclGetStringFromObj(objPtr, lenPtr) \ + ((objPtr)->bytes \ + ? (*(lenPtr) = (objPtr)->length, (objPtr)->bytes) \ + : Tcl_GetStringFromObj((objPtr), (lenPtr))) + /* *---------------------------------------------------------------- - * Macro used by the Tcl core to get a Tcl_WideInt value out of - * a Tcl_Obj of the "wideInt" type. Different implementation on - * different platforms depending whether TCL_WIDE_INT_IS_LONG. + * Macro used by the Tcl core to clean out an object's internal + * representation. Does not actually reset the rep's bytes. The ANSI C + * "prototype" for this macro is: + * + * MODULE_SCOPE void TclFreeIntRep(Tcl_Obj *objPtr); *---------------------------------------------------------------- */ -#ifdef TCL_WIDE_INT_IS_LONG -# define TclGetWide(resultVar, objPtr) \ - (resultVar) = (objPtr)->internalRep.longValue -# define TclGetLongFromWide(resultVar, objPtr) \ - (resultVar) = (objPtr)->internalRep.longValue -#else -# define TclGetWide(resultVar, objPtr) \ - (resultVar) = (objPtr)->internalRep.wideValue -# define TclGetLongFromWide(resultVar, objPtr) \ - (resultVar) = Tcl_WideAsLong((objPtr)->internalRep.wideValue) -#endif +#define TclFreeIntRep(objPtr) \ + if ((objPtr)->typePtr != NULL && \ + (objPtr)->typePtr->freeIntRepProc != NULL) { \ + (objPtr)->typePtr->freeIntRepProc(objPtr); \ + } /* *---------------------------------------------------------------- - * Macro used by the Tcl core get a unicode char from a utf string. - * It checks to see if we have a one-byte utf char before calling - * the real Tcl_UtfToUniChar, as this will save a lot of time for - * primarily ascii string handling. The macro's expression result - * is 1 for the 1-byte case or the result of Tcl_UtfToUniChar. + * Macro used by the Tcl core to clean out an object's string representation. * The ANSI C "prototype" for this macro is: * - * EXTERN int TclUtfToUniChar _ANSI_ARGS_((CONST char *string, - * Tcl_UniChar *ch)); + * MODULE_SCOPE void TclInvalidateStringRep(Tcl_Obj *objPtr); + *---------------------------------------------------------------- + */ + +#define TclInvalidateStringRep(objPtr) \ + if (objPtr->bytes != NULL) { \ + if (objPtr->bytes != tclEmptyStringRep) { \ + ckfree((char *) objPtr->bytes); \ + } \ + objPtr->bytes = NULL; \ + } + +/* + *---------------------------------------------------------------- + * Macros used by the Tcl core to grow Tcl_Token arrays. They use the same + * growth algorithm as used in tclStringObj.c for growing strings. The ANSI C + * "prototype" for this macro is: + * + * MODULE_SCOPE void TclGrowTokenArray(Tcl_Token *tokenPtr, int used, + * int available, int append, + * Tcl_Token *staticPtr); + * MODULE_SCOPE void TclGrowParseTokenArray(Tcl_Parse *parsePtr, + * int append); + *---------------------------------------------------------------- + */ + +#define TCL_MAX_TOKENS (int)(UINT_MAX / sizeof(Tcl_Token)) +#define TCL_MIN_TOKEN_GROWTH 50 +#define TclGrowTokenArray(tokenPtr, used, available, append, staticPtr) \ +{ \ + int needed = (used) + (append); \ + if (needed > TCL_MAX_TOKENS) { \ + Tcl_Panic("max # of tokens for a Tcl parse (%d) exceeded", \ + TCL_MAX_TOKENS); \ + } \ + if (needed > (available)) { \ + int allocated = 2 * needed; \ + Tcl_Token *oldPtr = (tokenPtr); \ + Tcl_Token *newPtr; \ + if (oldPtr == (staticPtr)) { \ + oldPtr = NULL; \ + } \ + if (allocated > TCL_MAX_TOKENS) { \ + allocated = TCL_MAX_TOKENS; \ + } \ + newPtr = (Tcl_Token *) attemptckrealloc((char *) oldPtr, \ + (unsigned int) (allocated * sizeof(Tcl_Token))); \ + if (newPtr == NULL) { \ + allocated = needed + (append) + TCL_MIN_TOKEN_GROWTH; \ + if (allocated > TCL_MAX_TOKENS) { \ + allocated = TCL_MAX_TOKENS; \ + } \ + newPtr = (Tcl_Token *) ckrealloc((char *) oldPtr, \ + (unsigned int) (allocated * sizeof(Tcl_Token))); \ + } \ + (available) = allocated; \ + if (oldPtr == NULL) { \ + memcpy((VOID *) newPtr, (VOID *) staticPtr, \ + (size_t) ((used) * sizeof(Tcl_Token))); \ + } \ + (tokenPtr) = newPtr; \ + } \ +} + +#define TclGrowParseTokenArray(parsePtr, append) \ + TclGrowTokenArray((parsePtr)->tokenPtr, (parsePtr)->numTokens, \ + (parsePtr)->tokensAvailable, (append), \ + (parsePtr)->staticTokens) + +/* + *---------------------------------------------------------------- + * Macro used by the Tcl core get a unicode char from a utf string. It checks + * to see if we have a one-byte utf char before calling the real + * Tcl_UtfToUniChar, as this will save a lot of time for primarily ASCII + * string handling. The macro's expression result is 1 for the 1-byte case or + * the result of Tcl_UtfToUniChar. The ANSI C "prototype" for this macro is: + * + * MODULE_SCOPE int TclUtfToUniChar(const char *string, Tcl_UniChar *ch); *---------------------------------------------------------------- */ #define TclUtfToUniChar(str, chPtr) \ - ((((unsigned char) *(str)) < 0xC0) ? \ - ((*(chPtr) = (Tcl_UniChar) *(str)), 1) \ + ((((unsigned char) *(str)) < 0xC0) ? \ + ((*(chPtr) = (Tcl_UniChar) *(str)), 1) \ : Tcl_UtfToUniChar(str, chPtr)) /* *---------------------------------------------------------------- - * Macro used by the Tcl core to compare Unicode strings. On - * big-endian systems we can use the more efficient memcmp, but - * this would not be lexically correct on little-endian systems. - * The ANSI C "prototype" for this macro is: + * Macro used by the Tcl core to compare Unicode strings. On big-endian + * systems we can use the more efficient memcmp, but this would not be + * lexically correct on little-endian systems. The ANSI C "prototype" for + * this macro is: * - * EXTERN int TclUniCharNcmp _ANSI_ARGS_((CONST Tcl_UniChar *cs, - * CONST Tcl_UniChar *ct, unsigned long n)); + * MODULE_SCOPE int TclUniCharNcmp(const Tcl_UniChar *cs, + * const Tcl_UniChar *ct, unsigned long n); *---------------------------------------------------------------- */ + #ifdef WORDS_BIGENDIAN # define TclUniCharNcmp(cs,ct,n) memcmp((cs),(ct),(n)*sizeof(Tcl_UniChar)) #else /* !WORDS_BIGENDIAN */ # define TclUniCharNcmp Tcl_UniCharNcmp #endif /* WORDS_BIGENDIAN */ -#include "tclIntDecls.h" +/* + *---------------------------------------------------------------- + * Macro used by the Tcl core to increment a namespace's export export epoch + * counter. The ANSI C "prototype" for this macro is: + * + * MODULE_SCOPE void TclInvalidateNsCmdLookup(Namespace *nsPtr); + *---------------------------------------------------------------- + */ + +#define TclInvalidateNsCmdLookup(nsPtr) \ + if ((nsPtr)->numExportPatterns) { \ + (nsPtr)->exportLookupEpoch++; \ + } \ + if ((nsPtr)->commandPathLength) { \ + (nsPtr)->cmdRefEpoch++; \ + } + +/* + *---------------------------------------------------------------------- + * + * Core procedures added to libtommath for bignum manipulation. + * + *---------------------------------------------------------------------- + */ + +MODULE_SCOPE int TclTommath_Init(Tcl_Interp *interp); +MODULE_SCOPE void TclBNInitBignumFromLong(mp_int *bignum, long initVal); +MODULE_SCOPE void TclBNInitBignumFromWideInt(mp_int *bignum, + Tcl_WideInt initVal); +MODULE_SCOPE void TclBNInitBignumFromWideUInt(mp_int *bignum, + Tcl_WideUInt initVal); + +/* + *---------------------------------------------------------------- + * Macro used by the Tcl core to check whether a pattern has any characters + * special to [string match]. The ANSI C "prototype" for this macro is: + * + * MODULE_SCOPE int TclMatchIsTrivial(const char *pattern); + *---------------------------------------------------------------- + */ + +#define TclMatchIsTrivial(pattern) strpbrk((pattern), "*[?\\") == NULL + +/* + *---------------------------------------------------------------- + * Macros used by the Tcl core to set a Tcl_Obj's numeric representation + * avoiding the corresponding function calls in time critical parts of the + * core. They should only be called on unshared objects. The ANSI C + * "prototypes" for these macros are: + * + * MODULE_SCOPE void TclSetIntObj(Tcl_Obj *objPtr, int intValue); + * MODULE_SCOPE void TclSetLongObj(Tcl_Obj *objPtr, long longValue); + * MODULE_SCOPE void TclSetBooleanObj(Tcl_Obj *objPtr, long boolValue); + * MODULE_SCOPE void TclSetWideIntObj(Tcl_Obj *objPtr, Tcl_WideInt w); + * MODULE_SCOPE void TclSetDoubleObj(Tcl_Obj *objPtr, double d); + *---------------------------------------------------------------- + */ + +#define TclSetIntObj(objPtr, i) \ + TclInvalidateStringRep(objPtr);\ + TclFreeIntRep(objPtr); \ + (objPtr)->internalRep.longValue = (long)(i); \ + (objPtr)->typePtr = &tclIntType + +#define TclSetLongObj(objPtr, l) \ + TclSetIntObj((objPtr), (l)) + +/* + * NOTE: There is to be no such thing as a "pure" boolean. Boolean values set + * programmatically go straight to being "int" Tcl_Obj's, with value 0 or 1. + * The only "boolean" Tcl_Obj's shall be those holding the cached boolean + * value of strings like: "yes", "no", "true", "false", "on", "off". + */ + +#define TclSetBooleanObj(objPtr, b) \ + TclSetIntObj((objPtr), ((b)? 1 : 0)); + +#ifndef NO_WIDE_TYPE +#define TclSetWideIntObj(objPtr, w) \ + TclInvalidateStringRep(objPtr);\ + TclFreeIntRep(objPtr); \ + (objPtr)->internalRep.wideValue = (Tcl_WideInt)(w); \ + (objPtr)->typePtr = &tclWideIntType +#endif + +#define TclSetDoubleObj(objPtr, d) \ + TclInvalidateStringRep(objPtr);\ + TclFreeIntRep(objPtr); \ + (objPtr)->internalRep.doubleValue = (double)(d); \ + (objPtr)->typePtr = &tclDoubleType + +/* + *---------------------------------------------------------------- + * Macros used by the Tcl core to create and initialise objects of standard + * types, avoiding the corresponding function calls in time critical parts of + * the core. The ANSI C "prototypes" for these macros are: + * + * MODULE_SCOPE void TclNewIntObj(Tcl_Obj *objPtr, int i); + * MODULE_SCOPE void TclNewLongObj(Tcl_Obj *objPtr, long l); + * MODULE_SCOPE void TclNewBooleanObj(Tcl_Obj *objPtr, int b); + * MODULE_SCOPE void TclNewWideObj(Tcl_Obj *objPtr, Tcl_WideInt w); + * MODULE_SCOPE void TclNewDoubleObj(Tcl_Obj *objPtr, double d); + * MODULE_SCOPE void TclNewStringObj(Tcl_Obj *objPtr, char *s, int len); + * MODULE_SCOPE void TclNewLiteralStringObj(Tcl_Obj*objPtr, char*sLiteral); + * + *---------------------------------------------------------------- + */ + +#ifndef TCL_MEM_DEBUG +#define TclNewIntObj(objPtr, i) \ + TclIncrObjsAllocated(); \ + TclAllocObjStorage(objPtr); \ + (objPtr)->refCount = 0; \ + (objPtr)->bytes = NULL; \ + (objPtr)->internalRep.longValue = (long)(i); \ + (objPtr)->typePtr = &tclIntType; \ + TCL_DTRACE_OBJ_CREATE(objPtr) + +#define TclNewLongObj(objPtr, l) \ + TclNewIntObj((objPtr), (l)) -# undef TCL_STORAGE_CLASS -# define TCL_STORAGE_CLASS DLLIMPORT +/* + * NOTE: There is to be no such thing as a "pure" boolean. + * See comment above TclSetBooleanObj macro above. + */ +#define TclNewBooleanObj(objPtr, b) \ + TclNewIntObj((objPtr), ((b)? 1 : 0)) + +#define TclNewDoubleObj(objPtr, d) \ + TclIncrObjsAllocated(); \ + TclAllocObjStorage(objPtr); \ + (objPtr)->refCount = 0; \ + (objPtr)->bytes = NULL; \ + (objPtr)->internalRep.doubleValue = (double)(d); \ + (objPtr)->typePtr = &tclDoubleType; \ + TCL_DTRACE_OBJ_CREATE(objPtr) + +#define TclNewStringObj(objPtr, s, len) \ + TclIncrObjsAllocated(); \ + TclAllocObjStorage(objPtr); \ + (objPtr)->refCount = 0; \ + TclInitStringRep((objPtr), (s), (len));\ + (objPtr)->typePtr = NULL; \ + TCL_DTRACE_OBJ_CREATE(objPtr) + +#else /* TCL_MEM_DEBUG */ +#define TclNewIntObj(objPtr, i) \ + (objPtr) = Tcl_NewIntObj(i) + +#define TclNewLongObj(objPtr, l) \ + (objPtr) = Tcl_NewLongObj(l) + +#define TclNewBooleanObj(objPtr, b) \ + (objPtr) = Tcl_NewBooleanObj(b) + +#define TclNewDoubleObj(objPtr, d) \ + (objPtr) = Tcl_NewDoubleObj(d) + +#define TclNewStringObj(objPtr, s, len) \ + (objPtr) = Tcl_NewStringObj((s), (len)) +#endif /* TCL_MEM_DEBUG */ + +/* + * The sLiteral argument *must* be a string literal; the incantation with + * sizeof(sLiteral "") will fail to compile otherwise. + */ +#define TclNewLiteralStringObj(objPtr, sLiteral) \ + TclNewStringObj((objPtr), (sLiteral), (int) (sizeof(sLiteral "") - 1)) + +/* + *---------------------------------------------------------------- + * Macros used by the Tcl core to test for some special double values. + * The ANSI C "prototypes" for these macros are: + * + * MODULE_SCOPE int TclIsInfinite(double d); + * MODULE_SCOPE int TclIsNaN(double d); + */ + +#ifdef _MSC_VER +# define TclIsInfinite(d) (!(_finite((d)))) +# define TclIsNaN(d) (_isnan((d))) +#else +# define TclIsInfinite(d) ((d) > DBL_MAX || (d) < -DBL_MAX) +# ifdef NO_ISNAN +# define TclIsNaN(d) ((d) != (d)) +# else +# define TclIsNaN(d) (isnan(d)) +# endif +#endif + +/* + * ---------------------------------------------------------------------- + * Macro to use to find the offset of a field in a structure. Computes number + * of bytes from beginning of structure to a given field. + */ + +#ifdef offsetof +#define TclOffset(type, field) ((int) offsetof(type, field)) +#else +#define TclOffset(type, field) ((int) ((char *) &((type *) 0)->field)) +#endif + +/* + *---------------------------------------------------------------- + * Inline version of Tcl_GetCurrentNamespace and Tcl_GetGlobalNamespace. + */ + +#define TclGetCurrentNamespace(interp) \ + (Tcl_Namespace *) ((Interp *)(interp))->varFramePtr->nsPtr + +#define TclGetGlobalNamespace(interp) \ + (Tcl_Namespace *) ((Interp *)(interp))->globalNsPtr + +/* + *---------------------------------------------------------------- + * Inline version of TclCleanupCommand; still need the function as it is in + * the internal stubs, but the core can use the macro instead. + */ + +#define TclCleanupCommandMacro(cmdPtr) \ + if (--(cmdPtr)->refCount <= 0) { \ + ckfree((char *) (cmdPtr));\ + } + +/* + *---------------------------------------------------------------- + * Inline versions of Tcl_LimitReady() and Tcl_LimitExceeded to limit number + * of calls out of the critical path. Note that this code isn't particularly + * readable; the non-inline version (in tclInterp.c) is much easier to + * understand. Note also that these macros takes different args (iPtr->limit) + * to the non-inline version. + */ + +#define TclLimitExceeded(limit) ((limit).exceeded != 0) + +#define TclLimitReady(limit) \ + (((limit).active == 0) ? 0 : \ + (++(limit).granularityTicker, \ + ((((limit).active & TCL_LIMIT_COMMANDS) && \ + (((limit).cmdGranularity == 1) || \ + ((limit).granularityTicker % (limit).cmdGranularity == 0))) \ + ? 1 : \ + (((limit).active & TCL_LIMIT_TIME) && \ + (((limit).timeGranularity == 1) || \ + ((limit).granularityTicker % (limit).timeGranularity == 0)))\ + ? 1 : 0))) + + +#include "tclIntDecls.h" +#include "tclIntPlatDecls.h" +#include "tclTomMathDecls.h" #endif /* _TCLINT */ |