diff options
Diffstat (limited to 'generic/tclInt.h')
-rw-r--r-- | generic/tclInt.h | 113 |
1 files changed, 50 insertions, 63 deletions
diff --git a/generic/tclInt.h b/generic/tclInt.h index 70d6d02..e0e694f 100644 --- a/generic/tclInt.h +++ b/generic/tclInt.h @@ -23,7 +23,6 @@ * Some numerics configuration options. */ -#undef NO_WIDE_TYPE #undef ACCEPT_NAN /* @@ -31,8 +30,7 @@ * here, so that system-dependent personalizations for the include files only * have to be made in once place. This results in a few extra includes, but * greater modularity. The order of the three groups of #includes is - * important. For example, stdio.h is needed by tcl.h, and the _ANSI_ARGS_ - * declaration in tcl.h is needed by stdlib.h in some configurations. + * important. For example, stdio.h is needed by tcl.h. */ #include "tclPort.h" @@ -96,14 +94,6 @@ typedef int ptrdiff_t; #endif /* - * When Tcl_WideInt and long are the same type, there's no value in - * having a tclWideIntType separate from the tclIntType. - */ -#ifdef TCL_WIDE_INT_IS_LONG -#define NO_WIDE_TYPE -#endif - -/* * Macros used to cast between pointers and integers (e.g. when storing an int * in ClientData), on 64-bit architectures they avoid gcc warning about "cast * to/from pointer from/to integer of different size". @@ -128,6 +118,10 @@ typedef int ptrdiff_t; # endif #endif +#if defined(_WIN32) && defined(_MSC_VER) +# define vsnprintf _vsnprintf +#endif + /* * The following procedures allow namespaces to be customized to support * special name resolution rules for commands/variables. @@ -1181,29 +1175,27 @@ typedef struct CmdFrame { * * EXECUTION CONTEXTS and usage of CmdFrame * - * Field TEBC EvalEx EvalObjEx - * ======= ==== ====== ========= - * level yes yes yes - * type BC/PREBC SRC/EVAL EVAL_LIST - * line0 yes yes yes - * framePtr yes yes yes - * ======= ==== ====== ========= + * Field TEBC EvalEx + * ======= ==== ====== + * level yes yes + * type BC/PREBC SRC/EVAL + * line0 yes yes + * framePtr yes yes + * ======= ==== ====== * - * ======= ==== ====== ========= union data - * line1 - yes - - * line3 - yes - - * path - yes - - * ------- ---- ------ --------- - * codePtr yes - - - * pc yes - - - * ======= ==== ====== ========= + * ======= ==== ========= union data + * line1 - yes + * line3 - yes + * path - yes + * ------- ---- ------ + * codePtr yes - + * pc yes - + * ======= ==== ====== * - * ======= ==== ====== ========= | union cmd - * listPtr - - yes | - * ------- ---- ------ --------- | - * cmd yes yes - | - * cmdlen yes yes - | - * ------- ---- ------ --------- | + * ======= ==== ========= union cmd + * str.cmd yes yes + * str.len yes yes + * ------- ---- ------ */ union { @@ -1216,15 +1208,9 @@ typedef struct CmdFrame { const char *pc; /* ... and instruction pointer. */ } tebc; } data; - union { - struct { - const char *cmd; /* The executed command, if possible... */ - int len; /* ... and its length. */ - } str; - Tcl_Obj *listPtr; /* Tcl_EvalObjEx, cmd list. */ - } cmd; - int numLevels; /* Value of interp's numLevels when the frame - * was pushed. */ + Tcl_Obj *cmdObj; + const char *cmd; /* The executed command, if possible... */ + int len; /* ... and its length. */ const struct CFWordBC *litarg; /* Link to set of literal arguments which have * ben pushed on the lineLABCPtr stack by @@ -1288,8 +1274,6 @@ typedef struct ContLineLoc { * location data referenced via the 'baseLocPtr'. * * TCL_LOCATION_EVAL : Frame is for a script evaluated by EvalEx. - * TCL_LOCATION_EVAL_LIST : Frame is for a script evaluated by the list - * optimization path of EvalObjEx. * TCL_LOCATION_BC : Frame is for bytecode. * TCL_LOCATION_PREBC : Frame is for precompiled bytecode. * TCL_LOCATION_SOURCE : Frame is for a script evaluated by EvalEx, from a @@ -1301,8 +1285,6 @@ typedef struct ContLineLoc { */ #define TCL_LOCATION_EVAL (0) /* Location in a dynamic eval script. */ -#define TCL_LOCATION_EVAL_LIST (1) /* Location in a dynamic eval script, - * list-path. */ #define TCL_LOCATION_BC (2) /* Location in byte code. */ #define TCL_LOCATION_PREBC (3) /* Location in precompiled byte code, no * location. */ @@ -1690,6 +1672,9 @@ typedef struct Command { * CMD_HAS_EXEC_TRACES - 1 means that this command has at least one * execution trace (as opposed to simple * delete/rename traces) in its tracePtr list. + * CMD_COMPILES_EXPANDED - 1 means that this command has a compiler that + * can handle expansion (provided it is not the + * first word). * TCL_TRACE_RENAME - A rename trace is in progress. Further * recursive renames will not be traced. * TCL_TRACE_DELETE - A delete trace is in progress. Further @@ -1700,6 +1685,7 @@ typedef struct Command { #define CMD_IS_DELETED 0x1 #define CMD_TRACE_ACTIVE 0x2 #define CMD_HAS_EXEC_TRACES 0x4 +#define CMD_COMPILES_EXPANDED 0x8 /* *---------------------------------------------------------------- @@ -2212,9 +2198,9 @@ typedef struct Interp { * other than these should be turned into errors. */ -#define TCL_ALLOW_EXCEPTIONS 4 -#define TCL_EVAL_FILE 2 -#define TCL_EVAL_CTX 8 +#define TCL_ALLOW_EXCEPTIONS 0x04 +#define TCL_EVAL_FILE 0x02 +#define TCL_EVAL_SOURCE_IN_FRAME 0x10 /* * Flag bits for Interp structures: @@ -2671,7 +2657,7 @@ MODULE_SCOPE const Tcl_ObjType tclProcBodyType; MODULE_SCOPE const Tcl_ObjType tclStringType; MODULE_SCOPE const Tcl_ObjType tclArraySearchType; MODULE_SCOPE const Tcl_ObjType tclEnsembleCmdType; -#ifndef NO_WIDE_TYPE +#ifndef TCL_WIDE_INT_IS_LONG MODULE_SCOPE const Tcl_ObjType tclWideIntType; #endif MODULE_SCOPE const Tcl_ObjType tclRegexpType; @@ -2831,7 +2817,7 @@ MODULE_SCOPE void TclArgumentRelease(Tcl_Interp *interp, Tcl_Obj *objv[], int objc); MODULE_SCOPE void TclArgumentBCEnter(Tcl_Interp *interp, Tcl_Obj *objv[], int objc, - void *codePtr, CmdFrame *cfPtr, int pc); + void *codePtr, CmdFrame *cfPtr, int cmd, int pc); MODULE_SCOPE void TclArgumentBCRelease(Tcl_Interp *interp, CmdFrame *cfPtr); MODULE_SCOPE void TclArgumentGet(Tcl_Interp *interp, Tcl_Obj *obj, @@ -2922,7 +2908,8 @@ MODULE_SCOPE int TclGetOpenModeEx(Tcl_Interp *interp, const char *modeString, int *seekFlagPtr, int *binaryPtr); MODULE_SCOPE Tcl_Obj * TclGetProcessGlobalValue(ProcessGlobalValue *pgvPtr); -MODULE_SCOPE const char *TclGetSrcInfoForCmd(Interp *iPtr, int *lenPtr); +MODULE_SCOPE Tcl_Obj * TclGetSourceFromFrame(CmdFrame *cfPtr, int objc, + Tcl_Obj *const objv[]); MODULE_SCOPE int TclGlob(Tcl_Interp *interp, char *pattern, Tcl_Obj *unquotedPrefix, int globFlags, Tcl_GlobTypeData *types); @@ -3013,9 +3000,8 @@ MODULE_SCOPE void TclpFinalizeMutex(Tcl_Mutex *mutexPtr); MODULE_SCOPE void TclpFinalizePipes(void); MODULE_SCOPE void TclpFinalizeSockets(void); MODULE_SCOPE int TclCreateSocketAddress(Tcl_Interp *interp, - struct addrinfo **addrlist, - const char *host, int port, int willBind, - const char **errorMsgPtr); + void **addrlist, const char *host, int port, + int willBind, const char **errorMsgPtr); MODULE_SCOPE int TclpThreadCreate(Tcl_ThreadId *idPtr, Tcl_ThreadCreateProc *proc, ClientData clientData, int stackSize, int flags); @@ -3100,6 +3086,7 @@ MODULE_SCOPE int TclTrimLeft(const char *bytes, int numBytes, const char *trim, int numTrim); MODULE_SCOPE int TclTrimRight(const char *bytes, int numBytes, const char *trim, int numTrim); +MODULE_SCOPE int TclUtfCasecmp(const char *cs, const char *ct); MODULE_SCOPE Tcl_Obj * TclpNativeToNormalized(ClientData clientData); MODULE_SCOPE Tcl_Obj * TclpFilesystemPathType(Tcl_Obj *pathPtr); MODULE_SCOPE int TclpDlopen(Tcl_Interp *interp, Tcl_Obj *pathPtr, @@ -4409,7 +4396,7 @@ MODULE_SCOPE Tcl_PackageInitProc Procbodytest_SafeInit; *---------------------------------------------------------------- */ -#define TclSetIntObj(objPtr, i) \ +#define TclSetLongObj(objPtr, i) \ do { \ TclInvalidateStringRep(objPtr); \ TclFreeIntRep(objPtr); \ @@ -4417,8 +4404,8 @@ MODULE_SCOPE Tcl_PackageInitProc Procbodytest_SafeInit; (objPtr)->typePtr = &tclIntType; \ } while (0) -#define TclSetLongObj(objPtr, l) \ - TclSetIntObj((objPtr), (l)) +#define TclSetIntObj(objPtr, l) \ + TclSetLongObj(objPtr, l) /* * NOTE: There is to be no such thing as a "pure" boolean. Boolean values set @@ -4428,9 +4415,9 @@ MODULE_SCOPE Tcl_PackageInitProc Procbodytest_SafeInit; */ #define TclSetBooleanObj(objPtr, b) \ - TclSetIntObj((objPtr), ((b)? 1 : 0)); + TclSetLongObj(objPtr, (b)!=0); -#ifndef NO_WIDE_TYPE +#ifndef TCL_WIDE_INT_IS_LONG #define TclSetWideIntObj(objPtr, w) \ do { \ TclInvalidateStringRep(objPtr); \ @@ -4466,7 +4453,7 @@ MODULE_SCOPE Tcl_PackageInitProc Procbodytest_SafeInit; */ #ifndef TCL_MEM_DEBUG -#define TclNewIntObj(objPtr, i) \ +#define TclNewLongObj(objPtr, i) \ do { \ TclIncrObjsAllocated(); \ TclAllocObjStorage(objPtr); \ @@ -4477,15 +4464,15 @@ MODULE_SCOPE Tcl_PackageInitProc Procbodytest_SafeInit; TCL_DTRACE_OBJ_CREATE(objPtr); \ } while (0) -#define TclNewLongObj(objPtr, l) \ - TclNewIntObj((objPtr), (l)) +#define TclNewIntObj(objPtr, l) \ + TclNewLongObj(objPtr, l) /* * NOTE: There is to be no such thing as a "pure" boolean. * See comment above TclSetBooleanObj macro above. */ #define TclNewBooleanObj(objPtr, b) \ - TclNewIntObj((objPtr), ((b)? 1 : 0)) + TclNewLongObj((objPtr), (b)!=0) #define TclNewDoubleObj(objPtr, d) \ do { \ |