summaryrefslogtreecommitdiffstats
path: root/generic/tclResult.c
diff options
context:
space:
mode:
Diffstat (limited to 'generic/tclResult.c')
-rw-r--r--generic/tclResult.c470
1 files changed, 28 insertions, 442 deletions
diff --git a/generic/tclResult.c b/generic/tclResult.c
index 2f2563a..ea30ce5 100644
--- a/generic/tclResult.c
+++ b/generic/tclResult.c
@@ -27,7 +27,6 @@ enum returnKeys {
static Tcl_Obj ** GetKeys(void);
static void ReleaseKeys(ClientData clientData);
static void ResetObjResult(Interp *iPtr);
-static void SetupAppendBuffer(Interp *iPtr, int newSpace);
/*
* This structure is used to take a snapshot of the interpreter state in
@@ -35,7 +34,7 @@ static void SetupAppendBuffer(Interp *iPtr, int newSpace);
* then back up to the result or the error that was previously in progress.
*/
-typedef struct InterpState {
+typedef struct {
int status; /* return code status */
int flags; /* Each remaining field saves the */
int returnLevel; /* corresponding field of the Interp */
@@ -211,188 +210,6 @@ Tcl_DiscardInterpState(
/*
*----------------------------------------------------------------------
*
- * Tcl_SaveResult --
- *
- * Takes a snapshot of the current result state of the interpreter. The
- * snapshot can be restored at any point by Tcl_RestoreResult. Note that
- * this routine does not preserve the errorCode, errorInfo, or flags
- * fields so it should not be used if an error is in progress.
- *
- * Once a snapshot is saved, it must be restored by calling
- * Tcl_RestoreResult, or discarded by calling Tcl_DiscardResult.
- *
- * Results:
- * None.
- *
- * Side effects:
- * Resets the interpreter result.
- *
- *----------------------------------------------------------------------
- */
-
-#undef Tcl_SaveResult
-void
-Tcl_SaveResult(
- Tcl_Interp *interp, /* Interpreter to save. */
- Tcl_SavedResult *statePtr) /* Pointer to state structure. */
-{
- Interp *iPtr = (Interp *) interp;
-
- /*
- * Move the result object into the save state. Note that we don't need to
- * change its refcount because we're moving it, not adding a new
- * reference. Put an empty object into the interpreter.
- */
-
- statePtr->objResultPtr = iPtr->objResultPtr;
- iPtr->objResultPtr = Tcl_NewObj();
- Tcl_IncrRefCount(iPtr->objResultPtr);
-
- /*
- * Save the string result.
- */
-
- statePtr->freeProc = iPtr->freeProc;
- if (iPtr->result == iPtr->resultSpace) {
- /*
- * Copy the static string data out of the interp buffer.
- */
-
- statePtr->result = statePtr->resultSpace;
- strcpy(statePtr->result, iPtr->result);
- statePtr->appendResult = NULL;
- } else if (iPtr->result == iPtr->appendResult) {
- /*
- * Move the append buffer out of the interp.
- */
-
- statePtr->appendResult = iPtr->appendResult;
- statePtr->appendAvl = iPtr->appendAvl;
- statePtr->appendUsed = iPtr->appendUsed;
- statePtr->result = statePtr->appendResult;
- iPtr->appendResult = NULL;
- iPtr->appendAvl = 0;
- iPtr->appendUsed = 0;
- } else {
- /*
- * Move the dynamic or static string out of the interpreter.
- */
-
- statePtr->result = iPtr->result;
- statePtr->appendResult = NULL;
- }
-
- iPtr->result = iPtr->resultSpace;
- iPtr->resultSpace[0] = 0;
- iPtr->freeProc = 0;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_RestoreResult --
- *
- * Restores the state of the interpreter to a snapshot taken by
- * Tcl_SaveResult. After this call, the token for the interpreter state
- * is no longer valid.
- *
- * Results:
- * None.
- *
- * Side effects:
- * Restores the interpreter result.
- *
- *----------------------------------------------------------------------
- */
-
-#undef Tcl_RestoreResult
-void
-Tcl_RestoreResult(
- Tcl_Interp *interp, /* Interpreter being restored. */
- Tcl_SavedResult *statePtr) /* State returned by Tcl_SaveResult. */
-{
- Interp *iPtr = (Interp *) interp;
-
- Tcl_ResetResult(interp);
-
- /*
- * Restore the string result.
- */
-
- iPtr->freeProc = statePtr->freeProc;
- if (statePtr->result == statePtr->resultSpace) {
- /*
- * Copy the static string data into the interp buffer.
- */
-
- iPtr->result = iPtr->resultSpace;
- strcpy(iPtr->result, statePtr->result);
- } else if (statePtr->result == statePtr->appendResult) {
- /*
- * Move the append buffer back into the interp.
- */
-
- if (iPtr->appendResult != NULL) {
- ckfree(iPtr->appendResult);
- }
-
- iPtr->appendResult = statePtr->appendResult;
- iPtr->appendAvl = statePtr->appendAvl;
- iPtr->appendUsed = statePtr->appendUsed;
- iPtr->result = iPtr->appendResult;
- } else {
- /*
- * Move the dynamic or static string back into the interpreter.
- */
-
- iPtr->result = statePtr->result;
- }
-
- /*
- * Restore the object result.
- */
-
- Tcl_DecrRefCount(iPtr->objResultPtr);
- iPtr->objResultPtr = statePtr->objResultPtr;
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * Tcl_DiscardResult --
- *
- * Frees the memory associated with an interpreter snapshot taken by
- * Tcl_SaveResult. If the snapshot is not restored, this function must be
- * called to discard it, or the memory will be lost.
- *
- * Results:
- * None.
- *
- * Side effects:
- * None.
- *
- *----------------------------------------------------------------------
- */
-
-#undef Tcl_DiscardResult
-void
-Tcl_DiscardResult(
- Tcl_SavedResult *statePtr) /* State returned by Tcl_SaveResult. */
-{
- TclDecrRefCount(statePtr->objResultPtr);
-
- if (statePtr->result == statePtr->appendResult) {
- ckfree(statePtr->appendResult);
- } else if (statePtr->freeProc == TCL_DYNAMIC) {
- ckfree(statePtr->result);
- } else if (statePtr->freeProc) {
- statePtr->freeProc(statePtr->result);
- }
-}
-
-/*
- *----------------------------------------------------------------------
- *
* Tcl_SetResult --
*
* Arrange for "result" to be the Tcl return value.
@@ -417,49 +234,15 @@ Tcl_SetResult(
* TCL_STATIC, TCL_VOLATILE, or the address of
* a Tcl_FreeProc such as free. */
{
- Interp *iPtr = (Interp *) interp;
- register Tcl_FreeProc *oldFreeProc = iPtr->freeProc;
- char *oldResult = iPtr->result;
-
- if (result == NULL) {
- iPtr->resultSpace[0] = 0;
- iPtr->result = iPtr->resultSpace;
- iPtr->freeProc = 0;
- } else if (freeProc == TCL_VOLATILE) {
- int length = strlen(result);
-
- if (length > TCL_RESULT_SIZE) {
- iPtr->result = ckalloc(length + 1);
- iPtr->freeProc = TCL_DYNAMIC;
- } else {
- iPtr->result = iPtr->resultSpace;
- iPtr->freeProc = 0;
- }
- memcpy(iPtr->result, result, (unsigned) length+1);
- } else {
- iPtr->result = (char *) result;
- iPtr->freeProc = freeProc;
+ Tcl_SetObjResult(interp, Tcl_NewStringObj(result, -1));
+ if (result == NULL || freeProc == NULL || freeProc == TCL_VOLATILE) {
+ return;
}
-
- /*
- * If the old result was dynamically-allocated, free it up. Do it here,
- * rather than at the beginning, in case the new result value was part of
- * the old result value.
- */
-
- if (oldFreeProc != 0) {
- if (oldFreeProc == TCL_DYNAMIC) {
- ckfree(oldResult);
- } else {
- oldFreeProc(oldResult);
- }
+ if (freeProc == TCL_DYNAMIC) {
+ ckfree(result);
+ } else {
+ (*freeProc)(result);
}
-
- /*
- * Reset the object result since we just set the string result.
- */
-
- ResetObjResult(iPtr);
}
/*
@@ -483,18 +266,9 @@ const char *
Tcl_GetStringResult(
register Tcl_Interp *interp)/* Interpreter whose result to return. */
{
- /*
- * If the string result is empty, move the object result to the string
- * result, then reset the object result.
- */
-
Interp *iPtr = (Interp *) interp;
- if (*(iPtr->result) == 0) {
- Tcl_SetResult(interp, TclGetString(Tcl_GetObjResult(interp)),
- TCL_VOLATILE);
- }
- return iPtr->result;
+ return Tcl_GetString(iPtr->objResultPtr);
}
/*
@@ -535,21 +309,6 @@ Tcl_SetObjResult(
*/
TclDecrRefCount(oldObjResult);
-
- /*
- * Reset the string result since we just set the result object.
- */
-
- if (iPtr->freeProc != NULL) {
- if (iPtr->freeProc == TCL_DYNAMIC) {
- ckfree(iPtr->result);
- } else {
- iPtr->freeProc(iPtr->result);
- }
- iPtr->freeProc = 0;
- }
- iPtr->result = iPtr->resultSpace;
- iPtr->resultSpace[0] = 0;
}
/*
@@ -578,32 +337,7 @@ Tcl_GetObjResult(
Tcl_Interp *interp) /* Interpreter whose result to return. */
{
register Interp *iPtr = (Interp *) interp;
- Tcl_Obj *objResultPtr;
- int length;
- /*
- * If the string result is non-empty, move the string result to the object
- * result, then reset the string result.
- */
-
- if (iPtr->result[0] != 0) {
- ResetObjResult(iPtr);
-
- objResultPtr = iPtr->objResultPtr;
- length = strlen(iPtr->result);
- TclInitStringRep(objResultPtr, iPtr->result, length);
-
- if (iPtr->freeProc != NULL) {
- if (iPtr->freeProc == TCL_DYNAMIC) {
- ckfree(iPtr->result);
- } else {
- iPtr->freeProc(iPtr->result);
- }
- iPtr->freeProc = 0;
- }
- iPtr->result = iPtr->resultSpace;
- iPtr->result[0] = 0;
- }
return iPtr->objResultPtr;
}
@@ -640,23 +374,6 @@ Tcl_AppendResultVA(
}
Tcl_AppendStringsToObjVA(objPtr, argList);
Tcl_SetObjResult(interp, objPtr);
-
- /*
- * Strictly we should call Tcl_GetStringResult(interp) here to make sure
- * that interp->result is correct according to the old contract, but that
- * makes the performance of much code (e.g. in Tk) absolutely awful. So we
- * leave it out; code that really wants interp->result can just insert the
- * calls to Tcl_GetStringResult() itself. [Patch 1041072 discussion]
- */
-
-#ifdef USE_INTERP_RESULT
- /*
- * Ensure that the interp->result is legal so old Tcl 7.* code still
- * works. There's still embarrasingly much of it about...
- */
-
- (void) Tcl_GetStringResult(interp);
-#endif /* USE_INTERP_RESULT */
}
/*
@@ -722,129 +439,20 @@ Tcl_AppendElement(
* to result. */
{
Interp *iPtr = (Interp *) interp;
- char *dst;
- int size;
- int flags;
-
- /*
- * If the string result is empty, move the object result to the string
- * result, then reset the object result.
- */
-
- (void) Tcl_GetStringResult(interp);
-
- /*
- * See how much space is needed, and grow the append buffer if needed to
- * accommodate the list element.
- */
-
- size = Tcl_ScanElement(element, &flags) + 1;
- if ((iPtr->result != iPtr->appendResult)
- || (iPtr->appendResult[iPtr->appendUsed] != 0)
- || ((size + iPtr->appendUsed) >= iPtr->appendAvl)) {
- SetupAppendBuffer(iPtr, size+iPtr->appendUsed);
- }
-
- /*
- * Convert the string into a list element and copy it to the buffer that's
- * forming, with a space separator if needed.
- */
-
- dst = iPtr->appendResult + iPtr->appendUsed;
- if (TclNeedSpace(iPtr->appendResult, dst)) {
- iPtr->appendUsed++;
- *dst = ' ';
- dst++;
-
- /*
- * If we need a space to separate this element from preceding stuff,
- * then this element will not lead a list, and need not have it's
- * leading '#' quoted.
- */
-
- flags |= TCL_DONT_QUOTE_HASH;
- }
- iPtr->appendUsed += Tcl_ConvertElement(element, dst, flags);
-}
-
-/*
- *----------------------------------------------------------------------
- *
- * SetupAppendBuffer --
- *
- * This function makes sure that there is an append buffer properly
- * initialized, if necessary, from the interpreter's result, and that it
- * has at least enough room to accommodate newSpace new bytes of
- * information.
- *
- * Results:
- * None.
- *
- * Side effects:
- * None.
- *
- *----------------------------------------------------------------------
- */
-
-static void
-SetupAppendBuffer(
- Interp *iPtr, /* Interpreter whose result is being set up. */
- int newSpace) /* Make sure that at least this many bytes of
- * new information may be added. */
-{
- int totalSpace;
-
- /*
- * Make the append buffer larger, if that's necessary, then copy the
- * result into the append buffer and make the append buffer the official
- * Tcl result.
- */
-
- if (iPtr->result != iPtr->appendResult) {
- /*
- * If an oversized buffer was used recently, then free it up so we go
- * back to a smaller buffer. This avoids tying up memory forever after
- * a large operation.
- */
-
- if (iPtr->appendAvl > 500) {
- ckfree(iPtr->appendResult);
- iPtr->appendResult = NULL;
- iPtr->appendAvl = 0;
- }
- iPtr->appendUsed = strlen(iPtr->result);
- } else if (iPtr->result[iPtr->appendUsed] != 0) {
- /*
- * Most likely someone has modified a result created by
- * Tcl_AppendResult et al. so that it has a different size. Just
- * recompute the size.
- */
-
- iPtr->appendUsed = strlen(iPtr->result);
- }
-
- totalSpace = newSpace + iPtr->appendUsed;
- if (totalSpace >= iPtr->appendAvl) {
- char *new;
-
- if (totalSpace < 100) {
- totalSpace = 200;
- } else {
- totalSpace *= 2;
- }
- new = ckalloc(totalSpace);
- strcpy(new, iPtr->result);
- if (iPtr->appendResult != NULL) {
- ckfree(iPtr->appendResult);
- }
- iPtr->appendResult = new;
- iPtr->appendAvl = totalSpace;
- } else if (iPtr->result != iPtr->appendResult) {
- strcpy(iPtr->appendResult, iPtr->result);
+ Tcl_Obj *elementPtr = Tcl_NewStringObj(element, -1);
+ Tcl_Obj *listPtr = Tcl_NewListObj(1, &elementPtr);
+ int length;
+ const char *bytes;
+
+ if (Tcl_IsShared(iPtr->objResultPtr)) {
+ Tcl_SetObjResult(interp, Tcl_DuplicateObj(iPtr->objResultPtr));
+ }
+ bytes = Tcl_GetStringFromObj(iPtr->objResultPtr, &length);
+ if (TclNeedSpace(bytes, bytes+length)) {
+ Tcl_AppendToObj(iPtr->objResultPtr, " ", 1);
}
-
- Tcl_FreeResult((Tcl_Interp *) iPtr);
- iPtr->result = iPtr->appendResult;
+ Tcl_AppendObjToObj(iPtr->objResultPtr, listPtr);
+ Tcl_DecrRefCount(listPtr);
}
/*
@@ -853,18 +461,17 @@ SetupAppendBuffer(
* Tcl_FreeResult --
*
* This function frees up the memory associated with an interpreter's
- * string result. It also resets the interpreter's result object.
- * Tcl_FreeResult is most commonly used when a function is about to
- * replace one result value with another.
+ * result, resetting the interpreter's result object. Tcl_FreeResult is
+ * most commonly used when a function is about to replace one result
+ * value with another.
*
* Results:
* None.
*
* Side effects:
- * Frees the memory associated with interp's string result and sets
- * interp->freeProc to zero, but does not change interp->result or clear
- * error state. Resets interp's result object to an unshared empty
- * object.
+ * Frees the memory associated with interp's result but does not change
+ * any part of the error dictionary (i.e., the errorinfo and errorcode
+ * remain the same).
*
*----------------------------------------------------------------------
*/
@@ -875,15 +482,6 @@ Tcl_FreeResult(
{
register Interp *iPtr = (Interp *) interp;
- if (iPtr->freeProc != NULL) {
- if (iPtr->freeProc == TCL_DYNAMIC) {
- ckfree(iPtr->result);
- } else {
- iPtr->freeProc(iPtr->result);
- }
- iPtr->freeProc = 0;
- }
-
ResetObjResult(iPtr);
}
@@ -913,16 +511,6 @@ Tcl_ResetResult(
register Interp *iPtr = (Interp *) interp;
ResetObjResult(iPtr);
- if (iPtr->freeProc != NULL) {
- if (iPtr->freeProc == TCL_DYNAMIC) {
- ckfree(iPtr->result);
- } else {
- iPtr->freeProc(iPtr->result);
- }
- iPtr->freeProc = 0;
- }
- iPtr->result = iPtr->resultSpace;
- iPtr->resultSpace[0] = 0;
if (iPtr->errorCode) {
/* Legacy support */
if (iPtr->flags & ERR_LEGACY_COPY) {
@@ -1112,7 +700,6 @@ Tcl_SetObjErrorCode(
*----------------------------------------------------------------------
*/
-#undef Tcl_GetErrorLine
int
Tcl_GetErrorLine(
Tcl_Interp *interp)
@@ -1130,7 +717,6 @@ Tcl_GetErrorLine(
*----------------------------------------------------------------------
*/
-#undef Tcl_SetErrorLine
void
Tcl_SetErrorLine(
Tcl_Interp *interp,
generated by cgit v0.12 at 2024-11-21 18:57:45 (GMT)