diff options
Diffstat (limited to 'generic/tclUtil.c')
| -rw-r--r-- | generic/tclUtil.c | 843 |
1 files changed, 496 insertions, 347 deletions
diff --git a/generic/tclUtil.c b/generic/tclUtil.c index 63c9fb2..13e54ec 100644 --- a/generic/tclUtil.c +++ b/generic/tclUtil.c @@ -26,9 +26,9 @@ static ProcessGlobalValue executableName = { }; /* - * The following values are used in the flags arguments of Tcl*Scan*Element and - * Tcl*Convert*Element. The values TCL_DONT_USE_BRACES and TCL_DONT_QUOTE_HASH - * are defined in tcl.h, like so: + * The following values are used in the flags arguments of Tcl*Scan*Element + * and Tcl*Convert*Element. The values TCL_DONT_USE_BRACES and + * TCL_DONT_QUOTE_HASH are defined in tcl.h, like so: * #define TCL_DONT_USE_BRACES 1 #define TCL_DONT_QUOTE_HASH 8 @@ -54,8 +54,8 @@ static ProcessGlobalValue executableName = { * conversion is most appropriate for Tcl*Convert*Element() to perform, and * sets two bits of the flags value to indicate the mode selected. * - * CONVERT_NONE The element needs no quoting. Its literal string - * is suitable as is. + * CONVERT_NONE The element needs no quoting. Its literal string is + * suitable as is. * CONVERT_BRACE The conversion should be enclosing the literal string * in braces. * CONVERT_ESCAPE The conversion should be using backslashes to escape @@ -63,19 +63,19 @@ static ProcessGlobalValue executableName = { * CONVERT_MASK A mask value used to extract the conversion mode from * the flags argument. * Also indicates a strange conversion mode where all - * special characters are escaped with backslashes - * *except for braces*. This is a strange and unnecessary + * special characters are escaped with backslashes + * *except for braces*. This is a strange and unnecessary * case, but it's part of the historical way in which - * lists have been formatted in Tcl. To experiment with + * lists have been formatted in Tcl. To experiment with * removing this case, set the value of COMPAT to 0. * - * One last flag value is used only by callers of TclScanElement(). The flag + * One last flag value is used only by callers of TclScanElement(). The flag * value produced by a call to Tcl*Scan*Element() will never leave this bit * set. * - * CONVERT_ANY The caller of TclScanElement() declares it can make - * no promise about what public flags will be passed to - * the matching call of TclConvertElement(). As such, + * CONVERT_ANY The caller of TclScanElement() declares it can make no + * promise about what public flags will be passed to the + * matching call of TclConvertElement(). As such, * TclScanElement() has to determine the worst case * destination buffer length over all possibilities, and * in other cases this means an overestimate of the @@ -129,17 +129,17 @@ const Tcl_ObjType tclEndOffsetType = { /* * * STRING REPRESENTATION OF LISTS * * * * - * The next several routines implement the conversions of strings to and - * from Tcl lists. To understand their operation, the rules of parsing - * and generating the string representation of lists must be known. Here - * we describe them in one place. + * The next several routines implement the conversions of strings to and from + * Tcl lists. To understand their operation, the rules of parsing and + * generating the string representation of lists must be known. Here we + * describe them in one place. * - * A list is made up of zero or more elements. Any string is a list if - * it is made up of alternating substrings of element-separating ASCII - * whitespace and properly formatted elements. + * A list is made up of zero or more elements. Any string is a list if it is + * made up of alternating substrings of element-separating ASCII whitespace + * and properly formatted elements. * - * The ASCII characters which can make up the whitespace between list - * elements are: + * The ASCII characters which can make up the whitespace between list elements + * are: * * \u0009 \t TAB * \u000A \n NEWLINE @@ -158,69 +158,68 @@ const Tcl_ObjType tclEndOffsetType = { * * Unlike command parsing, the BACKSLASH NEWLINE sequence is not * considered to be a whitespace character. * - * * Other Unicode whitespace characters (recognized by - * [string is space] or Tcl_UniCharIsSpace()) do not play any role - * as element separators in Tcl lists. + * * Other Unicode whitespace characters (recognized by [string is space] + * or Tcl_UniCharIsSpace()) do not play any role as element separators + * in Tcl lists. * * * The NUL byte ought not appear, as it is not in strings properly * encoded for Tcl, but if it is present, it is not treated as - * separating whitespace, or a string terminator. It is just - * another character in a list element. - * - * The interpretaton of a formatted substring as a list element follows - * rules similar to the parsing of the words of a command in a Tcl script. - * Backslash substitution plays a key role, and is defined exactly as it is - * in command parsing. The same routine, TclParseBackslash() is used in both - * command parsing and list parsing. - * - * NOTE: This means that if and when backslash substitution rules ever - * change for command parsing, the interpretation of strings as lists also - * changes. + * separating whitespace, or a string terminator. It is just another + * character in a list element. + * + * The interpretaton of a formatted substring as a list element follows rules + * similar to the parsing of the words of a command in a Tcl script. Backslash + * substitution plays a key role, and is defined exactly as it is in command + * parsing. The same routine, TclParseBackslash() is used in both command + * parsing and list parsing. + * + * NOTE: This means that if and when backslash substitution rules ever change + * for command parsing, the interpretation of strings as lists also changes. * * Backslash substitution replaces an "escape sequence" of one or more * characters starting with * \u005c \ BACKSLASH - * with a single character. The one character escape sequent case happens - * only when BACKSLASH is the last character in the string. In all other - * cases, the escape sequence is at least two characters long. + * with a single character. The one character escape sequent case happens only + * when BACKSLASH is the last character in the string. In all other cases, the + * escape sequence is at least two characters long. * - * The formatted substrings are interpreted as element values according to - * the following cases: + * The formatted substrings are interpreted as element values according to the + * following cases: * * * If the first character of a formatted substring is * \u007b { OPEN BRACE * then the end of the substring is the matching * \u007d } CLOSE BRACE - * character, where matching is determined by counting nesting levels, - * and not including any brace characters that are contained within a - * backslash escape sequence in the nesting count. Having found the - * matching brace, all characters between the braces are the string - * value of the element. If no matching close brace is found before the - * end of the string, the string is not a Tcl list. If the character - * following the close brace is not an element separating whitespace - * character, or the end of the string, then the string is not a Tcl list. - * - * NOTE: this differs from a brace-quoted word in the parsing of a - * Tcl command only in its treatment of the backslash-newline sequence. - * In a list element, the literal characters in the backslash-newline - * sequence become part of the element value. In a script word, - * conversion to a single SPACE character is done. + * character, where matching is determined by counting nesting levels, and + * not including any brace characters that are contained within a backslash + * escape sequence in the nesting count. Having found the matching brace, + * all characters between the braces are the string value of the element. + * If no matching close brace is found before the end of the string, the + * string is not a Tcl list. If the character following the close brace is + * not an element separating whitespace character, or the end of the string, + * then the string is not a Tcl list. + * + * NOTE: this differs from a brace-quoted word in the parsing of a Tcl + * command only in its treatment of the backslash-newline sequence. In a + * list element, the literal characters in the backslash-newline sequence + * become part of the element value. In a script word, conversion to a + * single SPACE character is done. * * NOTE: Most list element values can be represented by a formatted - * substring using brace quoting. The exceptions are any element value - * that includes an unbalanced brace not in a backslash escape sequence, - * and any value that ends with a backslash not itself in a backslash - * escape sequence. + * substring using brace quoting. The exceptions are any element value that + * includes an unbalanced brace not in a backslash escape sequence, and any + * value that ends with a backslash not itself in a backslash escape + * sequence. * * * If the first character of a formatted substring is * \u0022 " QUOTE * then the end of the substring is the next QUOTE character, not counting * any QUOTE characters that are contained within a backslash escape - * sequence. If no next QUOTE is found before the end of the string, the - * string is not a Tcl list. If the character following the closing QUOTE - * is not an element separating whitespace character, or the end of the - * string, then the string is not a Tcl list. Having found the limits - * of the substring, the element value is produced by performing backslash + * sequence. If no next QUOTE is found before the end of the string, the + * string is not a Tcl list. If the character following the closing QUOTE is + * not an element separating whitespace character, or the end of the string, + * then the string is not a Tcl list. Having found the limits of the + * substring, the element value is produced by performing backslash * substitution on the character sequence between the open and close QUOTEs. * * NOTE: Any element value can be represented by this style of formatting, @@ -231,7 +230,7 @@ const Tcl_ObjType tclEndOffsetType = { * of the substring, the element value is produced by performing backslash * substitution on it. * - * NOTE: Any element value can be represented by this style of formatting, + * NOTE: Any element value can be represented by this style of formatting, * given suitable choice of backslash escape sequences, with one exception. * The empty string cannot be represented as a list element without the use * of either braces or quotes to delimit it. @@ -239,32 +238,32 @@ const Tcl_ObjType tclEndOffsetType = { * This collection of parsing rules is implemented in the routine * TclFindElement(). * - * In order to produce lists that can be parsed by these rules, we need - * the ability to distinguish between characters that are part of a list - * element value from characters providing syntax that define the structure - * of the list. This means that our code that generates lists must at a - * minimum be able to produce escape sequences for the 10 characters - * identified above that have significance to a list parser. + * In order to produce lists that can be parsed by these rules, we need the + * ability to distinguish between characters that are part of a list element + * value from characters providing syntax that define the structure of the + * list. This means that our code that generates lists must at a minimum be + * able to produce escape sequences for the 10 characters identified above + * that have significance to a list parser. * - * * * CANONICAL LISTS * * * * * + * * * CANONICAL LISTS * * * * * * * In addition to the basic rules for parsing strings into Tcl lists, there * are additional properties to be met by the set of list values that are * generated by Tcl. Such list values are often said to be in "canonical * form": * - * * When any canonical list is evaluated as a Tcl script, it is a script - * of either zero commands (an empty list) or exactly one command. The - * command word is exactly the first element of the list, and each argument - * word is exactly one of the following elements of the list. This means - * that any characters that have special meaning during script evaluation - * need special treatment when canonical lists are produced: + * * When any canonical list is evaluated as a Tcl script, it is a script of + * either zero commands (an empty list) or exactly one command. The command + * word is exactly the first element of the list, and each argument word is + * exactly one of the following elements of the list. This means that any + * characters that have special meaning during script evaluation need + * special treatment when canonical lists are produced: * * * Whitespace between elements may not include NEWLINE. * * The command terminating character, * \u003b ; SEMICOLON - * must be BRACEd, QUOTEd, or escaped so that it does not terminate - * the command prematurely. + * must be BRACEd, QUOTEd, or escaped so that it does not terminate the + * command prematurely. * * Any of the characters that begin substitutions in scripts, * \u0024 $ DOLLAR * \u005b [ OPEN BRACKET @@ -274,11 +273,10 @@ const Tcl_ObjType tclEndOffsetType = { * \u0023 # HASH * that HASH character must be BRACEd, QUOTEd, or escaped so that it * does not convert the command into a comment. - * * Any list element that contains the character sequence - * BACKSLASH NEWLINE cannot be formatted with BRACEs. The - * BACKSLASH character must be represented by an escape - * sequence, and unless QUOTEs are used, the NEWLINE must - * be as well. + * * Any list element that contains the character sequence BACKSLASH + * NEWLINE cannot be formatted with BRACEs. The BACKSLASH character + * must be represented by an escape sequence, and unless QUOTEs are + * used, the NEWLINE must be as well. * * * It is also guaranteed that one can use a canonical list as a building * block of a larger script within command substitution, as in this example: @@ -289,66 +287,66 @@ const Tcl_ObjType tclEndOffsetType = { * * * Finally it is guaranteed that enclosing a canonical list in braces * produces a new value that is also a canonical list. This new list has - * length 1, and its only element is the original canonical list. This - * same guarantee also makes it possible to construct scripts where an - * argument word is given a list value by enclosing the canonical form - * of that list in braces: + * length 1, and its only element is the original canonical list. This same + * guarantee also makes it possible to construct scripts where an argument + * word is given a list value by enclosing the canonical form of that list + * in braces: * set script "puts {[list $one $two $three]}"; eval $script * This sort of coding was once fairly common, though it's become more * idiomatic to see the following instead: * set script [list puts [list $one $two $three]]; eval $script - * In order to support this guarantee, every canonical list must have + * In order to support this guarantee, every canonical list must have * balance when counting those braces that are not in escape sequences. * * Within these constraints, the canonical list generation routines - * TclScanElement() and TclConvertElement() attempt to generate the string - * for any list that is easiest to read. When an element value is itself + * TclScanElement() and TclConvertElement() attempt to generate the string for + * any list that is easiest to read. When an element value is itself * acceptable as the formatted substring, it is usually used (CONVERT_NONE). - * When some quoting or escaping is required, use of BRACEs (CONVERT_BRACE) - * is usually preferred over the use of escape sequences (CONVERT_ESCAPE). - * There are some exceptions to both of these preferences for reasons of - * code simplicity, efficiency, and continuation of historical habits. - * Canonical lists never use the QUOTE formatting to delimit their elements - * because that form of quoting does not nest, which makes construction of - * nested lists far too much trouble. Canonical lists always use only a - * single SPACE character for element-separating whitespace. + * When some quoting or escaping is required, use of BRACEs (CONVERT_BRACE) is + * usually preferred over the use of escape sequences (CONVERT_ESCAPE). There + * are some exceptions to both of these preferences for reasons of code + * simplicity, efficiency, and continuation of historical habits. Canonical + * lists never use the QUOTE formatting to delimit their elements because that + * form of quoting does not nest, which makes construction of nested lists far + * too much trouble. Canonical lists always use only a single SPACE character + * for element-separating whitespace. * * * * FUTURE CONSIDERATIONS * * * * * When a list element requires quoting or escaping due to a CLOSE BRACKET * character or an internal QUOTE character, a strange formatting mode is - * recommended. For example, if the value "a{b]c}d" is converted by the - * usual modes: + * recommended. For example, if the value "a{b]c}d" is converted by the usual + * modes: * * CONVERT_BRACE: a{b]c}d => {a{b]c}d} * CONVERT_ESCAPE: a{b]c}d => a\{b\]c\}d * - * we get perfectly usable formatted list elements. However, this is not - * what Tcl releases have been producing. Instead, we have: + * we get perfectly usable formatted list elements. However, this is not what + * Tcl releases have been producing. Instead, we have: * * CONVERT_MASK: a{b]c}d => a{b\]c}d * - * where the CLOSE BRACKET is escaped, but the BRACEs are not. The same - * effect can be seen replacing ] with " in this example. There does not - * appear to be any functional or aesthetic purpose for this strange - * additional mode. The sole purpose I can see for preserving it is to - * keep generating the same formatted lists programmers have become accustomed - * to, and perhaps written tests to expect. That is, compatibility only. - * The additional code complexity required to support this mode is significant. - * The lines of code supporting it are delimited in the routines below with - * #if COMPAT directives. This makes it easy to experiment with eliminating - * this formatting mode simply with "#define COMPAT 0" above. I believe - * this is worth considering. + * where the CLOSE BRACKET is escaped, but the BRACEs are not. The same effect + * can be seen replacing ] with " in this example. There does not appear to be + * any functional or aesthetic purpose for this strange additional mode. The + * sole purpose I can see for preserving it is to keep generating the same + * formatted lists programmers have become accustomed to, and perhaps written + * tests to expect. That is, compatibility only. The additional code + * complexity required to support this mode is significant. The lines of code + * supporting it are delimited in the routines below with #if COMPAT + * directives. This makes it easy to experiment with eliminating this + * formatting mode simply with "#define COMPAT 0" above. I believe this is + * worth considering. * - * Another consideration is the treatment of QUOTE characters in list elements. - * TclConvertElement() must have the ability to produce the escape sequence - * \" so that when a list element begins with a QUOTE we do not confuse - * that first character with a QUOTE used as list syntax to define list - * structure. However, that is the only place where QUOTE characters need - * quoting. In this way, handling QUOTE could really be much more like - * the way we handle HASH which also needs quoting and escaping only in - * particular situations. Following up this could increase the set of - * list elements that can use the CONVERT_NONE formatting mode. + * Another consideration is the treatment of QUOTE characters in list + * elements. TclConvertElement() must have the ability to produce the escape + * sequence \" so that when a list element begins with a QUOTE we do not + * confuse that first character with a QUOTE used as list syntax to define + * list structure. However, that is the only place where QUOTE characters need + * quoting. In this way, handling QUOTE could really be much more like the way + * we handle HASH which also needs quoting and escaping only in particular + * situations. Following up this could increase the set of list elements that + * can use the CONVERT_NONE formatting mode. * * More speculative is that the demands of canonical list form require brace * balance for the list as a whole, while the current implementation achieves @@ -366,15 +364,15 @@ const Tcl_ObjType tclEndOffsetType = { * * Given 'bytes' pointing to 'numBytes' bytes, scan through them and * count the number of whitespace runs that could be list element - * separators. If 'numBytes' is -1, scan to the terminating '\0'. - * Not a full list parser. Typically used to get a quick and dirty - * overestimate of length size in order to allocate space for an - * actual list parser to operate with. + * separators. If 'numBytes' is -1, scan to the terminating '\0'. Not a + * full list parser. Typically used to get a quick and dirty overestimate + * of length size in order to allocate space for an actual list parser to + * operate with. * * Results: - * Returns the largest number of list elements that could possibly - * be in this string, interpreted as a Tcl list. If 'endPtr' is not - * NULL, writes a pointer to the end of the string scanned there. + * Returns the largest number of list elements that could possibly be in + * this string, interpreted as a Tcl list. If 'endPtr' is not NULL, + * writes a pointer to the end of the string scanned there. * * Side effects: * None. @@ -395,16 +393,25 @@ TclMaxListLength( goto done; } - /* No list element before leading white space */ + /* + * No list element before leading white space. + */ + count += 1 - TclIsSpaceProc(*bytes); - /* Count white space runs as potential element separators */ + /* + * Count white space runs as potential element separators. + */ + while (numBytes) { if ((numBytes == -1) && (*bytes == '\0')) { break; } if (TclIsSpaceProc(*bytes)) { - /* Space run started; bump count */ + /* + * Space run started; bump count. + */ + count++; do { bytes++; @@ -413,16 +420,22 @@ TclMaxListLength( if ((numBytes == 0) || ((numBytes == -1) && (*bytes == '\0'))) { break; } - /* (*bytes) is non-space; return to counting state */ + + /* + * (*bytes) is non-space; return to counting state. + */ } bytes++; numBytes -= (numBytes != -1); } - /* No list element following trailing white space */ + /* + * No list element following trailing white space. + */ + count -= TclIsSpaceProc(bytes[-1]); - done: + done: if (endPtr) { *endPtr = bytes; } @@ -449,18 +462,18 @@ TclMaxListLength( * that's part of the element. If this is the last argument in the list, * then *nextPtr will point just after the last character in the list * (i.e., at the character at list+listLength). If sizePtr is non-NULL, - * *sizePtr is filled in with the number of bytes in the element. If - * the element is in braces, then *elementPtr will point to the character + * *sizePtr is filled in with the number of bytes in the element. If the + * element is in braces, then *elementPtr will point to the character * after the opening brace and *sizePtr will not include either of the * braces. If there isn't an element in the list, *sizePtr will be zero, * and both *elementPtr and *nextPtr will point just after the last * character in the list. If literalPtr is non-NULL, *literalPtr is set - * to a boolean value indicating whether the substring returned as - * the values of **elementPtr and *sizePtr is the literal value of - * a list element. If not, a call to TclCopyAndCollapse() is needed - * to produce the actual value of the list element. Note: this function - * does NOT collapse backslash sequences, but uses *literalPtr to tell - * callers when it is required for them to do so. + * to a boolean value indicating whether the substring returned as the + * values of **elementPtr and *sizePtr is the literal value of a list + * element. If not, a call to TclCopyAndCollapse() is needed to produce + * the actual value of the list element. Note: this function does NOT + * collapse backslash sequences, but uses *literalPtr to tell callers + * when it is required for them to do so. * * Side effects: * None. @@ -587,9 +600,10 @@ TclFindElement( /* * A backslash sequence not within a brace quoted element * means the value of the element is different from the - * substring we are parsing. A call to TclCopyAndCollapse() - * is needed to produce the element value. Inform the caller. + * substring we are parsing. A call to TclCopyAndCollapse() is + * needed to produce the element value. Inform the caller. */ + literal = 0; } TclParseBackslash(p, limit - p, &numChars, NULL); @@ -655,16 +669,16 @@ TclFindElement( if (p == limit) { if (openBraces != 0) { if (interp != NULL) { - Tcl_SetResult(interp, "unmatched open brace in list", - TCL_STATIC); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "unmatched open brace in list", -1)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "LIST", "BRACE", NULL); } return TCL_ERROR; } else if (inQuotes) { if (interp != NULL) { - Tcl_SetResult(interp, "unmatched open quote in list", - TCL_STATIC); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "unmatched open quote in list", -1)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "LIST", "QUOTE", NULL); } @@ -697,9 +711,9 @@ TclFindElement( * * Results: * Count bytes get copied from src to dst. Along the way, backslash - * sequences are substituted in the copy. After scanning count bytes - * from src, a null character is placed at the end of dst. Returns - * the number of bytes that got written to dst. + * sequences are substituted in the copy. After scanning count bytes from + * src, a null character is placed at the end of dst. Returns the number + * of bytes that got written to dst. * * Side effects: * None. @@ -717,6 +731,7 @@ TclCopyAndCollapse( while (count > 0) { char c = *src; + if (c == '\\') { int numRead; int backslashCount = TclParseBackslash(src, count, &numRead, dst); @@ -780,12 +795,11 @@ Tcl_SplitList( int length, size, i, result, elSize; /* - * Allocate enough space to work in. A (const char *) for each - * (possible) list element plus one more for terminating NULL, - * plus as many bytes as in the original string value, plus one - * more for a terminating '\0'. Space used to hold element separating - * white space in the original string gets re-purposed to hold '\0' - * characters in the argv array. + * Allocate enough space to work in. A (const char *) for each (possible) + * list element plus one more for terminating NULL, plus as many bytes as + * in the original string value, plus one more for a terminating '\0'. + * Space used to hold element separating white space in the original + * string gets re-purposed to hold '\0' characters in the argv array. */ size = TclMaxListLength(list, -1, &end) + 1; @@ -810,8 +824,8 @@ Tcl_SplitList( if (i >= size) { ckfree(argv); if (interp != NULL) { - Tcl_SetResult(interp, "internal error in Tcl_SplitList", - TCL_STATIC); + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "internal error in Tcl_SplitList", -1)); Tcl_SetErrorCode(interp, "TCL", "INTERNAL", "Tcl_SplitList", NULL); } @@ -844,9 +858,9 @@ Tcl_SplitList( * enclosing braces) to make the string into a valid Tcl list element. * * Results: - * The return value is an overestimate of the number of bytes that - * will be needed by Tcl_ConvertElement to produce a valid list element - * from src. The word at *flagPtr is filled in with a value needed by + * The return value is an overestimate of the number of bytes that will + * be needed by Tcl_ConvertElement to produce a valid list element from + * src. The word at *flagPtr is filled in with a value needed by * Tcl_ConvertElement when doing the actual conversion. * * Side effects: @@ -876,10 +890,10 @@ Tcl_ScanElement( * to the first null byte. * * Results: - * The return value is an overestimate of the number of bytes that - * will be needed by Tcl_ConvertCountedElement to produce a valid list - * element from src. The word at *flagPtr is filled in with a value - * needed by Tcl_ConvertCountedElement when doing the actual conversion. + * The return value is an overestimate of the number of bytes that will + * be needed by Tcl_ConvertCountedElement to produce a valid list element + * from src. The word at *flagPtr is filled in with a value needed by + * Tcl_ConvertCountedElement when doing the actual conversion. * * Side effects: * None. @@ -906,24 +920,24 @@ Tcl_ScanCountedElement( * * TclScanElement -- * - * This function is a companion function to TclConvertElement. It - * scans a string to see what needs to be done to it (e.g. add - * backslashes or enclosing braces) to make the string into a valid Tcl - * list element. If length is -1, then the string is scanned from src up - * to the first null byte. A NULL value for src is treated as an - * empty string. The incoming value of *flagPtr is a report from the - * caller what additional flags it will pass to TclConvertElement(). + * This function is a companion function to TclConvertElement. It scans a + * string to see what needs to be done to it (e.g. add backslashes or + * enclosing braces) to make the string into a valid Tcl list element. If + * length is -1, then the string is scanned from src up to the first null + * byte. A NULL value for src is treated as an empty string. The incoming + * value of *flagPtr is a report from the caller what additional flags it + * will pass to TclConvertElement(). * * Results: - * The recommended formatting mode for the element is determined and - * a value is written to *flagPtr indicating that recommendation. This + * The recommended formatting mode for the element is determined and a + * value is written to *flagPtr indicating that recommendation. This * recommendation is combined with the incoming flag values in *flagPtr * set by the caller to determine how many bytes will be needed by * TclConvertElement() in which to write the formatted element following - * the recommendation modified by the flag values. This number of bytes - * is the return value of the routine. In some situations it may be - * an overestimate, but so long as the caller passes the same flags - * to TclConvertElement(), it will be large enough. + * the recommendation modified by the flag values. This number of bytes + * is the return value of the routine. In some situations it may be an + * overestimate, but so long as the caller passes the same flags to + * TclConvertElement(), it will be large enough. * * Side effects: * None. @@ -941,7 +955,7 @@ TclScanElement( const char *p = src; int nestingLevel = 0; /* Brace nesting count */ int forbidNone = 0; /* Do not permit CONVERT_NONE mode. Something - needs protection or escape. */ + * needs protection or escape. */ int requireEscape = 0; /* Force use of CONVERT_ESCAPE mode. For some * reason bare or brace-quoted form fails. */ int extra = 0; /* Count of number of extra bytes needed for @@ -953,10 +967,13 @@ TclScanElement( int preferEscape = 0; /* Use preferences to track whether to use */ int preferBrace = 0; /* CONVERT_MASK mode. */ int braceCount = 0; /* Count of all braces '{' '}' seen. */ -#endif +#endif /* COMPAT */ if ((p == NULL) || (length == 0) || ((*p == '\0') && (length == -1))) { - /* Empty string element must be brace quoted. */ + /* + * Empty string element must be brace quoted. + */ + *flagPtr = CONVERT_BRACE; return 2; } @@ -966,10 +983,11 @@ TclScanElement( * Must escape or protect so leading character of value is not * misinterpreted as list element delimiting syntax. */ + forbidNone = 1; #if COMPAT preferBrace = 1; -#endif +#endif /* COMPAT */ } while (length) { @@ -978,18 +996,21 @@ TclScanElement( case '{': /* TYPE_BRACE */ #if COMPAT braceCount++; -#endif +#endif /* COMPAT */ extra++; /* Escape '{' => '\{' */ nestingLevel++; break; case '}': /* TYPE_BRACE */ #if COMPAT braceCount++; -#endif +#endif /* COMPAT */ extra++; /* Escape '}' => '\}' */ nestingLevel--; if (nestingLevel < 0) { - /* Unbalanced braces! Cannot format with brace quoting. */ + /* + * Unbalanced braces! Cannot format with brace quoting. + */ + requireEscape = 1; } break; @@ -1002,7 +1023,7 @@ TclScanElement( break; #else /* FLOW THROUGH */ -#endif +#endif /* COMPAT */ case '[': /* TYPE_SUBS */ case '$': /* TYPE_SUBS */ case ';': /* TYPE_COMMAND_END */ @@ -1016,18 +1037,25 @@ TclScanElement( extra++; /* Escape sequences all one byte longer. */ #if COMPAT preferBrace = 1; -#endif +#endif /* COMPAT */ break; case '\\': /* TYPE_SUBS */ extra++; /* Escape '\' => '\\' */ if ((length == 1) || ((length == -1) && (p[1] == '\0'))) { - /* Final backslash. Cannot format with brace quoting. */ + /* + * Final backslash. Cannot format with brace quoting. + */ + requireEscape = 1; break; } if (p[1] == '\n') { extra++; /* Escape newline => '\n', one byte longer */ - /* Backslash newline sequence. Brace quoting not permitted. */ + + /* + * Backslash newline sequence. Brace quoting not permitted. + */ + requireEscape = 1; length -= (length > 0); p++; @@ -1041,7 +1069,7 @@ TclScanElement( forbidNone = 1; #if COMPAT preferBrace = 1; -#endif +#endif /* COMPAT */ break; case '\0': /* TYPE_SUBS */ if (length == -1) { @@ -1055,22 +1083,33 @@ TclScanElement( p++; } - endOfString: + endOfString: if (nestingLevel != 0) { - /* Unbalanced braces! Cannot format with brace quoting. */ + /* + * Unbalanced braces! Cannot format with brace quoting. + */ + requireEscape = 1; } - /* We need at least as many bytes as are in the element value... */ + /* + * We need at least as many bytes as are in the element value... + */ + bytesNeeded = p - src; if (requireEscape) { /* - * We must use escape sequences. Add all the extra bytes needed - * to have room to create them. + * We must use escape sequences. Add all the extra bytes needed to + * have room to create them. */ + bytesNeeded += extra; - /* Make room to escape leading #, if needed. */ + + /* + * Make room to escape leading #, if needed. + */ + if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { bytesNeeded++; } @@ -1080,12 +1119,13 @@ TclScanElement( if (*flagPtr & CONVERT_ANY) { /* * The caller has not let us know what flags it will pass to - * TclConvertElement() so compute the max size we might need for - * any possible choice. Normally the formatting using escape - * sequences is the longer one, and a minimum "extra" value of 2 - * makes sure we don't request too small a buffer in those edge - * cases where that's not true. + * TclConvertElement() so compute the max size we might need for any + * possible choice. Normally the formatting using escape sequences is + * the longer one, and a minimum "extra" value of 2 makes sure we + * don't request too small a buffer in those edge cases where that's + * not true. */ + if (extra < 2) { extra = 2; } @@ -1093,59 +1133,78 @@ TclScanElement( *flagPtr |= TCL_DONT_USE_BRACES; } if (forbidNone) { - /* We must request some form of quoting of escaping... */ + /* + * We must request some form of quoting of escaping... + */ + #if COMPAT if (preferEscape && !preferBrace) { /* - * If we are quoting solely due to ] or internal " characters - * use the CONVERT_MASK mode where we escape all special - * characters except for braces. "extra" counted space needed - * to escape braces too, so substract "braceCount" to get our - * actual needs. + * If we are quoting solely due to ] or internal " characters use + * the CONVERT_MASK mode where we escape all special characters + * except for braces. "extra" counted space needed to escape + * braces too, so substract "braceCount" to get our actual needs. */ + bytesNeeded += (extra - braceCount); /* Make room to escape leading #, if needed. */ if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { bytesNeeded++; } + /* * If the caller reports it will direct TclConvertElement() to * use full escapes on the element, add back the bytes needed to * escape the braces. */ + if (*flagPtr & TCL_DONT_USE_BRACES) { bytesNeeded += braceCount; } *flagPtr = CONVERT_MASK; goto overflowCheck; } -#endif +#endif /* COMPAT */ if (*flagPtr & TCL_DONT_USE_BRACES) { /* * If the caller reports it will direct TclConvertElement() to * use escapes, add the extra bytes needed to have room for them. */ + bytesNeeded += extra; - /* Make room to escape leading #, if needed. */ + + /* + * Make room to escape leading #, if needed. + */ + if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { bytesNeeded++; } } else { - /* Add 2 bytes for room for the enclosing braces. */ + /* + * Add 2 bytes for room for the enclosing braces. + */ + bytesNeeded += 2; } *flagPtr = CONVERT_BRACE; goto overflowCheck; } - /* So far, no need to quote or escape anything. */ + /* + * So far, no need to quote or escape anything. + */ + if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { - /* If we need to quote a leading #, make room to enclose in braces. */ + /* + * If we need to quote a leading #, make room to enclose in braces. + */ + bytesNeeded += 2; } *flagPtr = CONVERT_NONE; - overflowCheck: + overflowCheck: if (bytesNeeded < 0) { Tcl_Panic("TclScanElement: string length overflow"); } @@ -1220,9 +1279,9 @@ Tcl_ConvertCountedElement( * * TclConvertElement -- * - * This is a companion function to TclScanElement. Given the - * information produced by TclScanElement, this function converts - * a string to a list element equal to that string. + * This is a companion function to TclScanElement. Given the information + * produced by TclScanElement, this function converts a string to a list + * element equal to that string. * * Results: * Information is copied to *dst in the form of a list element identical @@ -1236,7 +1295,8 @@ Tcl_ConvertCountedElement( *---------------------------------------------------------------------- */ -int TclConvertElement( +int +TclConvertElement( register const char *src, /* Source information for list element. */ int length, /* Number of bytes in src, or -1. */ char *dst, /* Place to put list-ified element. */ @@ -1245,19 +1305,28 @@ int TclConvertElement( int conversion = flags & CONVERT_MASK; char *p = dst; - /* Let the caller demand we use escape sequences rather than braces. */ + /* + * Let the caller demand we use escape sequences rather than braces. + */ + if ((flags & TCL_DONT_USE_BRACES) && (conversion & CONVERT_BRACE)) { conversion = CONVERT_ESCAPE; } - /* No matter what the caller demands, empty string must be braced! */ - if ((src == NULL) || (length == 0) || ((*src == '\0') && (length == -1))) { + /* + * No matter what the caller demands, empty string must be braced! + */ + + if ((src == NULL) || (length == 0) || (*src == '\0' && length == -1)) { src = tclEmptyStringRep; length = 0; conversion = CONVERT_BRACE; } - /* Escape leading hash as needed and requested. */ + /* + * Escape leading hash as needed and requested. + */ + if ((*src == '#') && !(flags & TCL_DONT_QUOTE_HASH)) { if (conversion == CONVERT_ESCAPE) { p[0] = '\\'; @@ -1270,7 +1339,10 @@ int TclConvertElement( } } - /* No escape or quoting needed. Copy the literal string value. */ + /* + * No escape or quoting needed. Copy the literal string value. + */ + if (conversion == CONVERT_NONE) { if (length == -1) { /* TODO: INT_MAX overflow? */ @@ -1284,7 +1356,10 @@ int TclConvertElement( } } - /* Formatted string is original string enclosed in braces. */ + /* + * Formatted string is original string enclosed in braces. + */ + if (conversion == CONVERT_BRACE) { *p = '{'; p++; @@ -1304,7 +1379,10 @@ int TclConvertElement( /* conversion == CONVERT_ESCAPE or CONVERT_MASK */ - /* Formatted string is original string converted to escape sequences. */ + /* + * Formatted string is original string converted to escape sequences. + */ + for ( ; length; src++, length -= (length > 0)) { switch (*src) { case ']': @@ -1320,13 +1398,12 @@ int TclConvertElement( case '{': case '}': #if COMPAT - if (conversion == CONVERT_ESCAPE) { -#endif + if (conversion == CONVERT_ESCAPE) +#endif /* COMPAT */ + { *p = '\\'; p++; -#if COMPAT } -#endif break; case '\f': *p = '\\'; @@ -1362,13 +1439,15 @@ int TclConvertElement( if (length == -1) { return p - dst; } + /* - * If we reach this point, there's an embedded NULL in the - * string range being processed, which should not happen when - * the encoding rules for Tcl strings are properly followed. - * If the day ever comes when we stop tolerating such things, - * this is where to put the Tcl_Panic(). + * If we reach this point, there's an embedded NULL in the string + * range being processed, which should not happen when the + * encoding rules for Tcl strings are properly followed. If the + * day ever comes when we stop tolerating such things, this is + * where to put the Tcl_Panic(). */ + break; } *p = *src; @@ -1402,17 +1481,18 @@ Tcl_Merge( int argc, /* How many strings to merge. */ const char *const *argv) /* Array of string values. */ { -# define LOCAL_SIZE 20 +#define LOCAL_SIZE 20 int localFlags[LOCAL_SIZE], *flagPtr = NULL; int i, bytesNeeded = 0; char *result, *dst; const int maxFlags = UINT_MAX / sizeof(int); + /* + * Handle empty list case first, so logic of the general case can be + * simpler. + */ + if (argc == 0) { - /* - * Handle empty list case first, so logic of the general case - * can be simpler. - */ result = ckalloc(1); result[0] = '\0'; return result; @@ -1426,17 +1506,17 @@ Tcl_Merge( flagPtr = localFlags; } else if (argc > maxFlags) { /* - * We cannot allocate a large enough flag array to format this - * list in one pass. We could imagine converting this routine - * to a multi-pass implementation, but for sizeof(int) == 4, - * the limit is a max of 2^30 list elements and since each element - * is at least one byte formatted, and requires one byte space - * between it and the next one, that a minimum space requirement - * of 2^31 bytes, which is already INT_MAX. If we tried to format - * a list of > maxFlags elements, we're just going to overflow - * the size limits on the formatted string anyway, so just issue - * that same panic early. + * We cannot allocate a large enough flag array to format this list in + * one pass. We could imagine converting this routine to a multi-pass + * implementation, but for sizeof(int) == 4, the limit is a max of + * 2^30 list elements and since each element is at least one byte + * formatted, and requires one byte space between it and the next one, + * that a minimum space requirement of 2^31 bytes, which is already + * INT_MAX. If we tried to format a list of > maxFlags elements, we're + * just going to overflow the size limits on the formatted string + * anyway, so just issue that same panic early. */ + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); } else { flagPtr = ckalloc(argc * sizeof(int)); @@ -1511,9 +1591,10 @@ Tcl_Backslash( *---------------------------------------------------------------------- * * TclTrimRight -- - * Takes two counted strings in the Tcl encoding which must both be - * null terminated. Conceptually trims from the right side of the - * first string all characters found in the second string. + * + * Takes two counted strings in the Tcl encoding which must both be null + * terminated. Conceptually trims from the right side of the first string + * all characters found in the second string. * * Results: * The number of bytes to be removed from the end of the string. @@ -1526,10 +1607,10 @@ Tcl_Backslash( int TclTrimRight( - const char *bytes, /* String to be trimmed... */ - int numBytes, /* ...and its length in bytes */ - const char *trim, /* String of trim characters... */ - int numTrim) /* ...and its length in bytes */ + const char *bytes, /* String to be trimmed... */ + int numBytes, /* ...and its length in bytes */ + const char *trim, /* String of trim characters... */ + int numTrim) /* ...and its length in bytes */ { const char *p = bytes + numBytes; int pInc; @@ -1538,12 +1619,18 @@ TclTrimRight( Tcl_Panic("TclTrimRight works only on null-terminated strings"); } - /* Empty strings -> nothing to do */ + /* + * Empty strings -> nothing to do. + */ + if ((numBytes == 0) || (numTrim == 0)) { return 0; } - /* Outer loop: iterate over string to be trimmed */ + /* + * Outer loop: iterate over string to be trimmed. + */ + do { Tcl_UniChar ch1; const char *q = trim; @@ -1552,7 +1639,10 @@ TclTrimRight( p = Tcl_UtfPrev(p, bytes); pInc = TclUtfToUniChar(p, &ch1); - /* Inner loop: scan trim string for match to current character */ + /* + * Inner loop: scan trim string for match to current character. + */ + do { Tcl_UniChar ch2; int qInc = TclUtfToUniChar(q, &ch2); @@ -1566,7 +1656,10 @@ TclTrimRight( } while (bytesLeft); if (bytesLeft == 0) { - /* No match; trim task done; *p is last non-trimmed char */ + /* + * No match; trim task done; *p is last non-trimmed char. + */ + p += pInc; break; } @@ -1579,9 +1672,10 @@ TclTrimRight( *---------------------------------------------------------------------- * * TclTrimLeft -- - * Takes two counted strings in the Tcl encoding which must both be - * null terminated. Conceptually trims from the left side of the - * first string all characters found in the second string. + * + * Takes two counted strings in the Tcl encoding which must both be null + * terminated. Conceptually trims from the left side of the first string + * all characters found in the second string. * * Results: * The number of bytes to be removed from the start of the string. @@ -1594,10 +1688,10 @@ TclTrimRight( int TclTrimLeft( - const char *bytes, /* String to be trimmed... */ - int numBytes, /* ...and its length in bytes */ - const char *trim, /* String of trim characters... */ - int numTrim) /* ...and its length in bytes */ + const char *bytes, /* String to be trimmed... */ + int numBytes, /* ...and its length in bytes */ + const char *trim, /* String of trim characters... */ + int numTrim) /* ...and its length in bytes */ { const char *p = bytes; @@ -1605,19 +1699,28 @@ TclTrimLeft( Tcl_Panic("TclTrimLeft works only on null-terminated strings"); } - /* Empty strings -> nothing to do */ + /* + * Empty strings -> nothing to do. + */ + if ((numBytes == 0) || (numTrim == 0)) { return 0; } - /* Outer loop: iterate over string to be trimmed */ + /* + * Outer loop: iterate over string to be trimmed. + */ + do { Tcl_UniChar ch1; int pInc = TclUtfToUniChar(p, &ch1); const char *q = trim; int bytesLeft = numTrim; - /* Inner loop: scan trim string for match to current character */ + /* + * Inner loop: scan trim string for match to current character. + */ + do { Tcl_UniChar ch2; int qInc = TclUtfToUniChar(q, &ch2); @@ -1631,7 +1734,10 @@ TclTrimLeft( } while (bytesLeft); if (bytesLeft == 0) { - /* No match; trim task done; *p is first non-trimmed char */ + /* + * No match; trim task done; *p is first non-trimmed char. + */ + break; } @@ -1673,14 +1779,20 @@ Tcl_Concat( int i, needSpace = 0, bytesNeeded = 0; char *result, *p; - /* Dispose of the empty result corner case first to simplify later code */ + /* + * Dispose of the empty result corner case first to simplify later code. + */ + if (argc == 0) { result = (char *) ckalloc(1); result[0] = '\0'; return result; } - /* First allocate the result buffer at the size required */ + /* + * First allocate the result buffer at the size required. + */ + for (i = 0; i < argc; i++) { bytesNeeded += strlen(argv[i]); if (bytesNeeded < 0) { @@ -1689,13 +1801,18 @@ Tcl_Concat( } if (bytesNeeded + argc - 1 < 0) { /* - * Panic test could be tighter, but not going to bother for - * this legacy routine. + * Panic test could be tighter, but not going to bother for this + * legacy routine. */ + Tcl_Panic("Tcl_Concat: max size of Tcl value exceeded"); } - /* All element bytes + (argc - 1) spaces + 1 terminating NULL */ - result = (char *) ckalloc((unsigned) (bytesNeeded + argc)); + + /* + * All element bytes + (argc - 1) spaces + 1 terminating NULL. + */ + + result = ckalloc((unsigned) (bytesNeeded + argc)); for (p = result, i = 0; i < argc; i++) { int trim, elemLength; @@ -1704,26 +1821,35 @@ Tcl_Concat( element = argv[i]; elemLength = strlen(argv[i]); - /* Trim away the leading whitespace */ + /* + * Trim away the leading whitespace. + */ + trim = TclTrimLeft(element, elemLength, CONCAT_WS, CONCAT_WS_SIZE); element += trim; elemLength -= trim; /* - * Trim away the trailing whitespace. Do not permit trimming - * to expose a final backslash character. + * Trim away the trailing whitespace. Do not permit trimming to expose + * a final backslash character. */ trim = TclTrimRight(element, elemLength, CONCAT_WS, CONCAT_WS_SIZE); trim -= trim && (element[elemLength - trim - 1] == '\\'); elemLength -= trim; - /* If we're left with empty element after trimming, do nothing */ + /* + * If we're left with empty element after trimming, do nothing. + */ + if (elemLength == 0) { continue; } - /* Append to the result with space if needed */ + /* + * Append to the result with space if needed. + */ + if (needSpace) { *p++ = ' '; } @@ -1802,9 +1928,10 @@ Tcl_ConcatObj( /* * Something cannot be determined to be safe, so build the concatenation * the slow way, using the string representations. + * + * First try to pre-allocate the size required. */ - /* First try to pre-allocate the size required */ for (i = 0; i < objc; i++) { element = TclGetStringFromObj(objv[i], &elemLength); bytesNeeded += elemLength; @@ -1812,11 +1939,13 @@ Tcl_ConcatObj( break; } } + /* - * Does not matter if this fails, will simply try later to build up - * the string with each Append reallocating as needed with the usual - * string append algorithm. When that fails it will report the error. + * Does not matter if this fails, will simply try later to build up the + * string with each Append reallocating as needed with the usual string + * append algorithm. When that fails it will report the error. */ + TclNewObj(resPtr); Tcl_AttemptSetObjLength(resPtr, bytesNeeded + objc - 1); Tcl_SetObjLength(resPtr, 0); @@ -1826,26 +1955,35 @@ Tcl_ConcatObj( element = TclGetStringFromObj(objv[i], &elemLength); - /* Trim away the leading whitespace */ + /* + * Trim away the leading whitespace. + */ + trim = TclTrimLeft(element, elemLength, CONCAT_WS, CONCAT_WS_SIZE); element += trim; elemLength -= trim; /* - * Trim away the trailing whitespace. Do not permit trimming - * to expose a final backslash character. + * Trim away the trailing whitespace. Do not permit trimming to expose + * a final backslash character. */ trim = TclTrimRight(element, elemLength, CONCAT_WS, CONCAT_WS_SIZE); trim -= trim && (element[elemLength - trim - 1] == '\\'); elemLength -= trim; - /* If we're left with empty element after trimming, do nothing */ + /* + * If we're left with empty element after trimming, do nothing. + */ + if (elemLength == 0) { continue; } - /* Append to the result with space if needed */ + /* + * Append to the result with space if needed. + */ + if (needSpace) { Tcl_AppendToObj(resPtr, " ", 1); } @@ -2249,6 +2387,7 @@ TclByteArrayMatch( /* * Matches ranges of form [a-z] or [z-a]. */ + break; } } else if (startChar == ch1) { @@ -2295,9 +2434,9 @@ TclByteArrayMatch( * * TclStringMatchObj -- * - * See if a particular string matches a particular pattern. - * Allows case insensitivity. This is the generic multi-type handler - * for the various matching algorithms. + * See if a particular string matches a particular pattern. Allows case + * insensitivity. This is the generic multi-type handler for the various + * matching algorithms. * * Results: * The return value is 1 if string matches pattern, and 0 otherwise. The @@ -2657,24 +2796,8 @@ Tcl_DStringResult( Tcl_DString *dsPtr) /* Dynamic string that is to become the * result of interp. */ { - Interp *iPtr = (Interp *) interp; - Tcl_ResetResult(interp); - - if (dsPtr->string != dsPtr->staticSpace) { - iPtr->result = dsPtr->string; - iPtr->freeProc = TCL_DYNAMIC; - } else if (dsPtr->length < TCL_RESULT_SIZE) { - iPtr->result = iPtr->resultSpace; - memcpy(iPtr->result, dsPtr->string, dsPtr->length + 1); - } else { - Tcl_SetResult(interp, dsPtr->string, TCL_VOLATILE); - } - - dsPtr->string = dsPtr->staticSpace; - dsPtr->length = 0; - dsPtr->spaceAvl = TCL_DSTRING_STATIC_SIZE; - dsPtr->staticSpace[0] = '\0'; + Tcl_SetObjResult(interp, TclDStringToObj(dsPtr)); } /* @@ -2710,6 +2833,39 @@ Tcl_DStringGetResult( } /* + * Do more efficient transfer when we know the result is a Tcl_Obj. When + * there's no st`ring result, we only have to deal with two cases: + * + * 1. When the string rep is the empty string, when we don't copy but + * instead use the staticSpace in the DString to hold an empty string. + + * 2. When the string rep is not there or there's a real string rep, when + * we use Tcl_GetString to fetch (or generate) the string rep - which + * we know to have been allocated with ckalloc() - and use it to + * populate the DString space. Then, we free the internal rep. and set + * the object's string representation back to the canonical empty + * string. + */ + + if (!iPtr->result[0] && iPtr->objResultPtr + && !Tcl_IsShared(iPtr->objResultPtr)) { + if (iPtr->objResultPtr->bytes == tclEmptyStringRep) { + dsPtr->string = dsPtr->staticSpace; + dsPtr->string[0] = 0; + dsPtr->length = 0; + dsPtr->spaceAvl = TCL_DSTRING_STATIC_SIZE; + } else { + dsPtr->string = Tcl_GetString(iPtr->objResultPtr); + dsPtr->length = iPtr->objResultPtr->length; + dsPtr->spaceAvl = dsPtr->length + 1; + TclFreeIntRep(iPtr->objResultPtr); + iPtr->objResultPtr->bytes = tclEmptyStringRep; + iPtr->objResultPtr->length = 0; + } + return; + } + + /* * If the string result is empty, move the object result to the string * result, then reset the object result. */ @@ -2947,12 +3103,12 @@ Tcl_PrintDouble( * Tcl 8.4 implements the first of these, which gives rise to * anomalies in formatting: * - * % expr 0.1 - * 0.10000000000000001 - * % expr 0.01 - * 0.01 - * % expr 1e-7 - * 9.9999999999999995e-08 + * % expr 0.1 + * 0.10000000000000001 + * % expr 0.01 + * 0.01 + * % expr 1e-7 + * 9.9999999999999995e-08 * * For human readability, it appears better to choose the second rule, * and let [expr 0.1] return 0.1. But for 8.4 compatibility, we prefer @@ -2965,8 +3121,8 @@ Tcl_PrintDouble( */ digits = TclDoubleDigits(value, *precisionPtr, - TCL_DD_E_FORMAT /* | TCL_DD_SHORTEN_FLAG */, - &exponent, &signum, &end); + TCL_DD_E_FORMAT /* | TCL_DD_SHORTEN_FLAG */, + &exponent, &signum, &end); } if (signum) { *dst++ = '-'; @@ -3222,10 +3378,10 @@ TclNeedSpace( */ int -TclFormatInt(buffer, n) - char *buffer; /* Points to the storage into which the +TclFormatInt( + char *buffer, /* Points to the storage into which the * formatted characters are written. */ - long n; /* The integer to format. */ + long n) /* The integer to format. */ { long intVal; int i; @@ -3243,9 +3399,9 @@ TclFormatInt(buffer, n) } /* - * Check whether "n" is the maximum negative value. This is - * -2^(m-1) for an m-bit word, and has no positive equivalent; - * negating it produces the same value. + * Check whether "n" is the maximum negative value. This is -2^(m-1) for + * an m-bit word, and has no positive equivalent; negating it produces the + * same value. */ intVal = -n; /* [Bug 3390638] Workaround for*/ @@ -3277,6 +3433,7 @@ TclFormatInt(buffer, n) for (j = 0; j < i; j++, i--) { char tmp = buffer[i]; + buffer[i] = buffer[j]; buffer[j] = tmp; } @@ -3382,16 +3539,10 @@ TclGetIntForIndex( parseError: if (interp != NULL) { - /* - * The result might not be empty; this resets it which should be both - * a cheap operation, and of little problem because this is an - * error-generation path anyway. - */ - bytes = Tcl_GetString(objPtr); - Tcl_ResetResult(interp); - Tcl_AppendResult(interp, "bad index \"", bytes, - "\": must be integer?[+-]integer? or end?[+-]integer?", NULL); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "bad index \"%s\": must be integer?[+-]integer? or" + " end?[+-]integer?", bytes)); if (!strncmp(bytes, "end-", 4)) { bytes += 4; } @@ -3483,9 +3634,8 @@ SetEndOffsetFromAny( if ((*bytes != 'e') || (strncmp(bytes, "end", (size_t)((length > 3) ? 3 : length)) != 0)) { if (interp != NULL) { - Tcl_ResetResult(interp); - Tcl_AppendResult(interp, "bad index \"", bytes, - "\": must be end?[+-]integer?", NULL); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "bad index \"%s\": must be end?[+-]integer?", bytes)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "INDEX", NULL); } return TCL_ERROR; @@ -3519,9 +3669,8 @@ SetEndOffsetFromAny( badIndexFormat: if (interp != NULL) { - Tcl_ResetResult(interp); - Tcl_AppendResult(interp, "bad index \"", bytes, - "\": must be end?[+-]integer?", NULL); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "bad index \"%s\": must be end?[+-]integer?", bytes)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "INDEX", NULL); } return TCL_ERROR; @@ -3597,8 +3746,8 @@ TclCheckBadOctal( * be added to an existing error message as extra info. */ - Tcl_AppendResult(interp, " (looks like invalid octal number)", - NULL); + Tcl_AppendToObj(Tcl_GetObjResult(interp), + " (looks like invalid octal number)", -1); } return 1; } @@ -3750,7 +3899,7 @@ TclSetProcessGlobalValue( if (NULL != pgvPtr->value) { ckfree(pgvPtr->value); } else { - Tcl_CreateExitHandler(FreeProcessGlobalValue, (ClientData) pgvPtr); + Tcl_CreateExitHandler(FreeProcessGlobalValue, pgvPtr); } bytes = Tcl_GetStringFromObj(newValue, &pgvPtr->numBytes); pgvPtr->value = ckalloc(pgvPtr->numBytes + 1); @@ -4214,7 +4363,7 @@ TclReToGlob( invalidGlob: if (interp != NULL) { - Tcl_AppendResult(interp, msg, NULL); + Tcl_SetObjResult(interp, Tcl_NewStringObj(msg, -1)); Tcl_SetErrorCode(interp, "TCL", "RE2GLOB", code, NULL); } Tcl_DStringFree(dsPtr); |