diff options
Diffstat (limited to 'generic')
| -rw-r--r-- | generic/tcl.decls | 4 | ||||
| -rw-r--r-- | generic/tcl.h | 2 | ||||
| -rw-r--r-- | generic/tclDecls.h | 8 | ||||
| -rw-r--r-- | generic/tclDictObj.c | 58 | ||||
| -rw-r--r-- | generic/tclIndexObj.c | 10 | ||||
| -rw-r--r-- | generic/tclInt.h | 4 | ||||
| -rw-r--r-- | generic/tclListObj.c | 65 | ||||
| -rw-r--r-- | generic/tclUtil.c | 943 |
8 files changed, 803 insertions, 291 deletions
diff --git a/generic/tcl.decls b/generic/tcl.decls index b33e808..20e9575 100644 --- a/generic/tcl.decls +++ b/generic/tcl.decls @@ -774,10 +774,10 @@ declare 217 generic { void Tcl_ResetResult(Tcl_Interp *interp) } declare 218 generic { - int Tcl_ScanElement(CONST char *str, int *flagPtr) + int Tcl_ScanElement(CONST char *src, int *flagPtr) } declare 219 generic { - int Tcl_ScanCountedElement(CONST char *str, int length, int *flagPtr) + int Tcl_ScanCountedElement(CONST char *src, int length, int *flagPtr) } # Obsolete declare 220 generic { diff --git a/generic/tcl.h b/generic/tcl.h index 790b7ac..015995c 100644 --- a/generic/tcl.h +++ b/generic/tcl.h @@ -956,8 +956,6 @@ typedef struct Tcl_DString { * is safe to leave the hash unquoted when the element is not the first * element of a list, and this flag can be used by the caller to indicate * that condition. - * (Careful! If you change these flag values be sure to change the definitions - * at the front of tclUtil.c). */ #define TCL_DONT_USE_BRACES 1 diff --git a/generic/tclDecls.h b/generic/tclDecls.h index b741475..4517d01 100644 --- a/generic/tclDecls.h +++ b/generic/tclDecls.h @@ -1312,12 +1312,12 @@ EXTERN void Tcl_ResetResult(Tcl_Interp *interp); #ifndef Tcl_ScanElement_TCL_DECLARED #define Tcl_ScanElement_TCL_DECLARED /* 218 */ -EXTERN int Tcl_ScanElement(CONST char *str, int *flagPtr); +EXTERN int Tcl_ScanElement(CONST char *src, int *flagPtr); #endif #ifndef Tcl_ScanCountedElement_TCL_DECLARED #define Tcl_ScanCountedElement_TCL_DECLARED /* 219 */ -EXTERN int Tcl_ScanCountedElement(CONST char *str, int length, +EXTERN int Tcl_ScanCountedElement(CONST char *src, int length, int *flagPtr); #endif #ifndef Tcl_SeekOld_TCL_DECLARED @@ -3661,8 +3661,8 @@ typedef struct TclStubs { void (*tcl_RegExpRange) (Tcl_RegExp regexp, int index, CONST84 char **startPtr, CONST84 char **endPtr); /* 215 */ void (*tcl_Release) (ClientData clientData); /* 216 */ void (*tcl_ResetResult) (Tcl_Interp *interp); /* 217 */ - int (*tcl_ScanElement) (CONST char *str, int *flagPtr); /* 218 */ - int (*tcl_ScanCountedElement) (CONST char *str, int length, int *flagPtr); /* 219 */ + int (*tcl_ScanElement) (CONST char *src, int *flagPtr); /* 218 */ + int (*tcl_ScanCountedElement) (CONST char *src, int length, int *flagPtr); /* 219 */ int (*tcl_SeekOld) (Tcl_Channel chan, int offset, int mode); /* 220 */ int (*tcl_ServiceAll) (void); /* 221 */ int (*tcl_ServiceEvent) (int flags); /* 222 */ diff --git a/generic/tclDictObj.c b/generic/tclDictObj.c index 33fec57..06c5754 100644 --- a/generic/tclDictObj.c +++ b/generic/tclDictObj.c @@ -460,19 +460,27 @@ UpdateStringOfDict( Tcl_Obj *dictPtr) { #define LOCAL_SIZE 20 - int localFlags[LOCAL_SIZE], *flagPtr; + int localFlags[LOCAL_SIZE], *flagPtr = NULL; Dict *dict = dictPtr->internalRep.otherValuePtr; ChainEntry *cPtr; Tcl_Obj *keyPtr, *valuePtr; - int numElems, i, length; + int i, length, bytesNeeded = 0; char *elem, *dst; + const int maxFlags = UINT_MAX / sizeof(int); /* * This field is the most useful one in the whole hash structure, and it * is not exposed by any API function... */ - numElems = dict->table.numEntries * 2; + int numElems = dict->table.numEntries * 2; + + /* Handle empty list case first, simplifies what follows */ + if (numElems == 0) { + dictPtr->bytes = tclEmptyStringRep; + dictPtr->length = 0; + return; + } /* * Pass 1: estimate space, gather flags. @@ -480,55 +488,63 @@ UpdateStringOfDict( if (numElems <= LOCAL_SIZE) { flagPtr = localFlags; + } else if (numElems > maxFlags) { + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); } else { flagPtr = (int *) ckalloc((unsigned) numElems*sizeof(int)); } - dictPtr->length = 1; for (i=0,cPtr=dict->entryChainHead; i<numElems; i+=2,cPtr=cPtr->nextPtr) { /* * Assume that cPtr is never NULL since we know the number of array * elements already. */ + flagPtr[i] = ( i ? TCL_DONT_QUOTE_HASH : 0 ); keyPtr = (Tcl_Obj *) Tcl_GetHashKey(&dict->table, &cPtr->entry); elem = TclGetStringFromObj(keyPtr, &length); - dictPtr->length += Tcl_ScanCountedElement(elem, length, - &flagPtr[i]) + 1; + bytesNeeded += TclScanElement(elem, length, flagPtr+i); + if (bytesNeeded < 0) { + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); + } + flagPtr[i+1] = TCL_DONT_QUOTE_HASH; valuePtr = Tcl_GetHashValue(&cPtr->entry); elem = TclGetStringFromObj(valuePtr, &length); - dictPtr->length += Tcl_ScanCountedElement(elem, length, - &flagPtr[i+1]) + 1; + bytesNeeded += TclScanElement(elem, length, flagPtr+i+1); + if (bytesNeeded < 0) { + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); + } } + if (bytesNeeded > INT_MAX - numElems + 1) { + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); + } + bytesNeeded += numElems; /* * Pass 2: copy into string rep buffer. */ - dictPtr->bytes = ckalloc((unsigned) dictPtr->length); + dictPtr->length = bytesNeeded - 1; + dictPtr->bytes = ckalloc((unsigned) bytesNeeded); dst = dictPtr->bytes; for (i=0,cPtr=dict->entryChainHead; i<numElems; i+=2,cPtr=cPtr->nextPtr) { + flagPtr[i] |= ( i ? TCL_DONT_QUOTE_HASH : 0 ); keyPtr = (Tcl_Obj *) Tcl_GetHashKey(&dict->table, &cPtr->entry); elem = TclGetStringFromObj(keyPtr, &length); - dst += Tcl_ConvertCountedElement(elem, length, dst, - flagPtr[i] | (i==0 ? 0 : TCL_DONT_QUOTE_HASH)); - *(dst++) = ' '; + dst += TclConvertElement(elem, length, dst, flagPtr[i]); + *dst++ = ' '; + flagPtr[i+1] |= TCL_DONT_QUOTE_HASH; valuePtr = Tcl_GetHashValue(&cPtr->entry); elem = TclGetStringFromObj(valuePtr, &length); - dst += Tcl_ConvertCountedElement(elem, length, dst, - flagPtr[i+1] | TCL_DONT_QUOTE_HASH); - *(dst++) = ' '; + dst += TclConvertElement(elem, length, dst, flagPtr[i+1]); + *dst++ = ' '; } + dictPtr->bytes[dictPtr->length] = '\0'; + if (flagPtr != localFlags) { ckfree((char *) flagPtr); } - if (dst == dictPtr->bytes) { - *dst = 0; - } else { - *(--dst) = 0; - } - dictPtr->length = dst - dictPtr->bytes; } /* diff --git a/generic/tclIndexObj.c b/generic/tclIndexObj.c index 595132c..3e37f0f 100644 --- a/generic/tclIndexObj.c +++ b/generic/tclIndexObj.c @@ -537,12 +537,13 @@ Tcl_WrongNumArgs( } else { elementStr = TclGetStringFromObj(origObjv[i], &elemLen); } - len = Tcl_ScanCountedElement(elementStr, elemLen, &flags); + flags = 0; + len = TclScanElement(elementStr, elemLen, &flags); if (MAY_QUOTE_WORD && len != elemLen) { char *quotedElementStr = TclStackAlloc(interp, (unsigned)len); - len = Tcl_ConvertCountedElement(elementStr, elemLen, + len = TclConvertElement(elementStr, elemLen, quotedElementStr, flags); Tcl_AppendToObj(objPtr, quotedElementStr, len); TclStackFree(interp, quotedElementStr); @@ -591,12 +592,13 @@ Tcl_WrongNumArgs( */ elementStr = TclGetStringFromObj(objv[i], &elemLen); - len = Tcl_ScanCountedElement(elementStr, elemLen, &flags); + flags = 0; + len = TclScanElement(elementStr, elemLen, &flags); if (MAY_QUOTE_WORD && len != elemLen) { char *quotedElementStr = TclStackAlloc(interp,(unsigned) len); - len = Tcl_ConvertCountedElement(elementStr, elemLen, + len = TclConvertElement(elementStr, elemLen, quotedElementStr, flags); Tcl_AppendToObj(objPtr, quotedElementStr, len); TclStackFree(interp, quotedElementStr); diff --git a/generic/tclInt.h b/generic/tclInt.h index f2fd0b8..1c1e615 100644 --- a/generic/tclInt.h +++ b/generic/tclInt.h @@ -2573,6 +2573,8 @@ MODULE_SCOPE void TclContinuationsEnterDerived(Tcl_Obj *objPtr, MODULE_SCOPE ContLineLoc* TclContinuationsGet(Tcl_Obj *objPtr); MODULE_SCOPE void TclContinuationsCopy(Tcl_Obj *objPtr, Tcl_Obj *originObjPtr); +MODULE_SCOPE int TclConvertElement(CONST char *src, int length, + char *dst, int flags); MODULE_SCOPE void TclDeleteNamespaceVars(Namespace *nsPtr); /* TIP #280 - Modified token based evulation, with line information. */ MODULE_SCOPE int TclEvalEx(Tcl_Interp *interp, const char *script, @@ -2781,6 +2783,8 @@ MODULE_SCOPE void TclRememberMutex(Tcl_Mutex *mutex); MODULE_SCOPE void TclRemoveScriptLimitCallbacks(Tcl_Interp *interp); MODULE_SCOPE int TclReToGlob(Tcl_Interp *interp, const char *reStr, int reStrLen, Tcl_DString *dsPtr, int *flagsPtr); +MODULE_SCOPE int TclScanElement(CONST char *string, int length, + int *flagPtr); MODULE_SCOPE void TclSetBgErrorHandler(Tcl_Interp *interp, Tcl_Obj *cmdPrefix); MODULE_SCOPE void TclSetBignumIntRep(Tcl_Obj *objPtr, diff --git a/generic/tclListObj.c b/generic/tclListObj.c index c2e9c78..17aa256 100644 --- a/generic/tclListObj.c +++ b/generic/tclListObj.c @@ -1806,19 +1806,29 @@ UpdateStringOfList( Tcl_Obj *listPtr) /* List object with string rep to update. */ { # define LOCAL_SIZE 20 - int localFlags[LOCAL_SIZE], *flagPtr; + int localFlags[LOCAL_SIZE], *flagPtr = NULL; List *listRepPtr = ListRepPtr(listPtr); int numElems = listRepPtr->elemCount; - register int i; + int i, length, bytesNeeded = 0; char *elem, *dst; - int length; Tcl_Obj **elemPtrs; /* - * Convert each element of the list to string form and then convert it to - * proper list element form, adding it to the result buffer. + * Mark the list as being canonical; although it will now have a string + * rep, it is one we derived through proper "canonical" quoting and so + * it's known to be free from nasties relating to [concat] and [eval]. */ + listRepPtr->canonicalFlag = 1; + + /* Handle empty list case first, so rest of the routine is simpler */ + + if (numElems == 0) { + listPtr->bytes = tclEmptyStringRep; + listPtr->length = 0; + return; + } + /* * Pass 1: estimate space, gather flags. */ @@ -1826,54 +1836,41 @@ UpdateStringOfList( if (numElems <= LOCAL_SIZE) { flagPtr = localFlags; } else { + /* We know numElems <= LIST_MAX, so this is safe. */ flagPtr = (int *) ckalloc((unsigned) numElems * sizeof(int)); } - listPtr->length = 1; elemPtrs = &listRepPtr->elements; for (i = 0; i < numElems; i++) { + flagPtr[i] = ( i ? TCL_DONT_QUOTE_HASH : 0 ); elem = TclGetStringFromObj(elemPtrs[i], &length); - listPtr->length += Tcl_ScanCountedElement(elem, length, flagPtr+i)+1; - - /* - * Check for continued sanity. [Bug 1267380] - */ - - if (listPtr->length < 1) { - Tcl_Panic("string representation size exceeds sane bounds"); + bytesNeeded += TclScanElement(elem, length, flagPtr+i); + if (bytesNeeded < 0) { + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); } } + if (bytesNeeded > INT_MAX - numElems + 1) { + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); + } + bytesNeeded += numElems; /* * Pass 2: copy into string rep buffer. */ - listPtr->bytes = ckalloc((unsigned) listPtr->length); + listPtr->length = bytesNeeded - 1; + listPtr->bytes = ckalloc((unsigned) bytesNeeded); dst = listPtr->bytes; for (i = 0; i < numElems; i++) { + flagPtr[i] |= ( i ? TCL_DONT_QUOTE_HASH : 0 ); elem = TclGetStringFromObj(elemPtrs[i], &length); - dst += Tcl_ConvertCountedElement(elem, length, dst, - flagPtr[i] | (i==0 ? 0 : TCL_DONT_QUOTE_HASH)); - *dst = ' '; - dst++; + dst += TclConvertElement(elem, length, dst, flagPtr[i]); + *dst++ = ' '; } + listPtr->bytes[listPtr->length] = '\0'; + if (flagPtr != localFlags) { ckfree((char *) flagPtr); } - if (dst == listPtr->bytes) { - *dst = 0; - } else { - dst--; - *dst = 0; - } - listPtr->length = dst - listPtr->bytes; - - /* - * Mark the list as being canonical; although it has a string rep, it is - * one we derived through proper "canonical" quoting and so it's known to - * be free from nasties relating to [concat] and [eval]. - */ - - listRepPtr->canonicalFlag = 1; } /* diff --git a/generic/tclUtil.c b/generic/tclUtil.c index bd543b0..b00489d 100644 --- a/generic/tclUtil.c +++ b/generic/tclUtil.c @@ -26,31 +26,71 @@ static ProcessGlobalValue executableName = { }; /* - * The following values are used in the flags returned by Tcl_ScanElement and - * used by Tcl_ConvertElement. The values TCL_DONT_USE_BRACES and - * TCL_DONT_QUOTE_HASH are defined in tcl.h; make sure neither value overlaps - * with any of the values below. - * - * TCL_DONT_USE_BRACES - 1 means the string mustn't be enclosed in - * braces (e.g. it contains unmatched braces, or - * ends in a backslash character, or user just - * doesn't want braces); handle all special - * characters by adding backslashes. - * USE_BRACES - 1 means the string contains a special - * character that can be handled simply by - * enclosing the entire argument in braces. - * BRACES_UNMATCHED - 1 means that braces aren't properly matched in - * the argument. + * The following values are used in the flags arguments of Tcl*Scan*Element and + * Tcl*Convert*Element. The values TCL_DONT_USE_BRACES and TCL_DONT_QUOTE_HASH + * are defined in tcl.h, like so: + * +#define TCL_DONT_USE_BRACES 1 +#define TCL_DONT_QUOTE_HASH 8 + * + * Those are public flag bits which callers of the public routines + * Tcl_Convert*Element() can use to indicate: + * + * TCL_DONT_USE_BRACES - 1 means the caller is insisting that brace + * quoting not be used when converting the list + * element. * TCL_DONT_QUOTE_HASH - 1 means the caller insists that a leading hash * character ('#') should *not* be quoted. This * is appropriate when the caller can guarantee * the element is not the first element of a * list, so [eval] cannot mis-parse the element * as a comment. + * + * The remaining values which can be carried by the flags of these routines + * are for internal use only. Make sure they do not overlap with the public + * values above. + * + * The Tcl*Scan*Element() routines make a determination which of 4 modes of + * conversion is most appropriate for Tcl*Convert*Element() to perform, and + * sets two bits of the flags value to indicate the mode selected. + * + * CONVERT_NONE The element needs no quoting. Its literal string + * is suitable as is. + * CONVERT_BRACE The conversion should be enclosing the literal string + * in braces. + * CONVERT_ESCAPE The conversion should be using backslashes to escape + * any characters in the string that require it. + * CONVERT_MASK A mask value used to extract the conversion mode from + * the flags argument. + * Also indicates a strange conversion mode where all + * special characters are escaped with backslashes + * *except for braces*. This is a strange and unnecessary + * case, but it's part of the historical way in which + * lists have been formatted in Tcl. To experiment with + * removing this case, set the value of COMPAT to 0. + * + * One last flag value is used only by callers of TclScanElement(). The flag + * value produced by a call to Tcl*Scan*Element() will never leave this bit + * set. + * + * CONVERT_ANY The caller of TclScanElement() declares it can make + * no promise about what public flags will be passed to + * the matching call of TclConvertElement(). As such, + * TclScanElement() has to determine the worst case + * destination buffer length over all possibilities, and + * in other cases this means an overestimate of the + * required size. + * + * For more details, see the comments on the Tcl*Scan*Element and + * Tcl*Convert*Element routines. */ -#define USE_BRACES 2 -#define BRACES_UNMATCHED 4 +#define COMPAT 1 +#define CONVERT_NONE 0 +#define CONVERT_BRACE 2 +#define CONVERT_ESCAPE 4 +#define CONVERT_MASK (CONVERT_BRACE | CONVERT_ESCAPE) +#define CONVERT_ANY 16 /* * The following key is used by Tcl_PrintDouble and TclPrecTraceProc to @@ -87,6 +127,239 @@ Tcl_ObjType tclEndOffsetType = { }; /* + * * STRING REPRESENTATION OF LISTS * * * + * + * The next several routines implement the conversions of strings to and + * from Tcl lists. To understand their operation, the rules of parsing + * and generating the string representation of lists must be known. Here + * we describe them in one place. + * + * A list is made up of zero or more elements. Any string is a list if + * it is made up of alternating substrings of element-separating ASCII + * whitespace and properly formatted elements. + * + * The ASCII characters which can make up the whitespace between list + * elements are: + * + * \u0009 \t TAB + * \u000A \n NEWLINE + * \u000B \v VERTICAL TAB + * \u000C \f FORM FEED + * \u000D \r CARRIAGE RETURN + * \u0020 SPACE + * + * NOTE: differences between this and other places where Tcl defines a role + * for "whitespace". + * + * * Unlike command parsing, here NEWLINE is just another whitespace + * character; its role as a command terminator in a script has no + * importance here. + * + * * Unlike command parsing, the BACKSLASH NEWLINE sequence is not + * considered to be a whitespace character. + * + * * Other Unicode whitespace characters (recognized by + * [string is space] or Tcl_UniCharIsSpace()) do not play any role + * as element separators in Tcl lists. + * + * * The NUL byte ought not appear, as it is not in strings properly + * encoded for Tcl, but if it is present, it is not treated as + * separating whitespace, or a string terminator. It is just + * another character in a list element. + * + * The interpretaton of a formatted substring as a list element follows + * rules similar to the parsing of the words of a command in a Tcl script. + * Backslash substitution plays a key role, and is defined exactly as it is + * in command parsing. The same routine, TclParseBackslash() is used in both + * command parsing and list parsing. + * + * NOTE: This means that if and when backslash substitution rules ever + * change for command parsing, the interpretation of strings as lists also + * changes. + * + * Backslash substitution replaces an "escape sequence" of one or more + * characters starting with + * \u005c \ BACKSLASH + * with a single character. The one character escape sequent case happens + * only when BACKSLASH is the last character in the string. In all other + * cases, the escape sequence is at least two characters long. + * + * The formatted substrings are interpreted as element values according to + * the following cases: + * + * * If the first character of a formatted substring is + * \u007b { OPEN BRACE + * then the end of the substring is the matching + * \u007d } CLOSE BRACE + * character, where matching is determined by counting nesting levels, + * and not including any brace characters that are contained within a + * backslash escape sequence in the nesting count. Having found the + * matching brace, all characters between the braces are the string + * value of the element. If no matching close brace is found before the + * end of the string, the string is not a Tcl list. If the character + * following the close brace is not an element separating whitespace + * character, or the end of the string, then the string is not a Tcl list. + * + * NOTE: this differs from a brace-quoted word in the parsing of a + * Tcl command only in its treatment of the backslash-newline sequence. + * In a list element, the literal characters in the backslash-newline + * sequence become part of the element value. In a script word, + * conversion to a single SPACE character is done. + * + * NOTE: Most list element values can be represented by a formatted + * substring using brace quoting. The exceptions are any element value + * that includes an unbalanced brace not in a backslash escape sequence, + * and any value that ends with a backslash not itself in a backslash + * escape sequence. + * + * * If the first character of a formatted substring is + * \u0022 " QUOTE + * then the end of the substring is the next QUOTE character, not counting + * any QUOTE characters that are contained within a backslash escape + * sequence. If no next QUOTE is found before the end of the string, the + * string is not a Tcl list. If the character following the closing QUOTE + * is not an element separating whitespace character, or the end of the + * string, then the string is not a Tcl list. Having found the limits + * of the substring, the element value is produced by performing backslash + * substitution on the character sequence between the open and close QUOTEs. + * + * NOTE: Any element value can be represented by this style of formatting, + * given suitable choice of backslash escape sequences. + * + * * All other formatted substrings are terminated by the next element + * separating whitespace character in the string. Having found the limits + * of the substring, the element value is produced by performing backslash + * substitution on it. + * + * NOTE: Any element value can be represented by this style of formatting, + * given suitable choice of backslash escape sequences, with one exception. + * The empty string cannot be represented as a list element without the use + * of either braces or quotes to delimit it. + * + * This collection of parsing rules is implemented in the routine + * TclFindElement(). + * + * In order to produce lists that can be parsed by these rules, we need + * the ability to distinguish between characters that are part of a list + * element value from characters providing syntax that define the structure + * of the list. This means that our code that generates lists must at a + * minimum be able to produce escape sequences for the 10 characters + * identified above that have significance to a list parser. + * + * * * CANONICAL LISTS * * * * * + * + * In addition to the basic rules for parsing strings into Tcl lists, there + * are additional properties to be met by the set of list values that are + * generated by Tcl. Such list values are often said to be in "canonical + * form": + * + * * When any canonical list is evaluated as a Tcl script, it is a script + * of either zero commands (an empty list) or exactly one command. The + * command word is exactly the first element of the list, and each argument + * word is exactly one of the following elements of the list. This means + * that any characters that have special meaning during script evaluation + * need special treatment when canonical lists are produced: + * + * * Whitespace between elements may not include NEWLINE. + * * The command terminating character, + * \u003b ; SEMICOLON + * must be BRACEd, QUOTEd, or escaped so that it does not terminate + * the command prematurely. + * * Any of the characters that begin substitutions in scripts, + * \u0024 $ DOLLAR + * \u005b [ OPEN BRACKET + * \u005c \ BACKSLASH + * need to be BRACEd or escaped. + * * In any list where the first character of the first element is + * \u0023 # HASH + * that HASH character must be BRACEd, QUOTEd, or escaped so that it + * does not convert the command into a comment. + * * Any list element that contains the character sequence + * BACKSLASH NEWLINE cannot be formatted with BRACEs. The + * BACKSLASH character must be represented by an escape + * sequence, and unless QUOTEs are used, the NEWLINE must + * be as well. + * + * * It is also guaranteed that one can use a canonical list as a building + * block of a larger script within command substitution, as in this example: + * set script "puts \[[list $cmd $arg]]"; eval $script + * To support this usage, any appearance of the character + * \u005d ] CLOSE BRACKET + * in a list element must be BRACEd, QUOTEd, or escaped. + * + * * Finally it is guaranteed that enclosing a canonical list in braces + * produces a new value that is also a canonical list. This new list has + * length 1, and its only element is the original canonical list. This + * same guarantee also makes it possible to construct scripts where an + * argument word is given a list value by enclosing the canonical form + * of that list in braces: + * set script "puts {[list $one $two $three]}"; eval $script + * This sort of coding was once fairly common, though it's become more + * idiomatic to see the following instead: + * set script [list puts [list $one $two $three]]; eval $script + * In order to support this guarantee, every canonical list must have + * balance when counting those braces that are not in escape sequences. + * + * Within these constraints, the canonical list generation routines + * TclScanElement() and TclConvertElement() attempt to generate the string + * for any list that is easiest to read. When an element value is itself + * acceptable as the formatted substring, it is usually used (CONVERT_NONE). + * When some quoting or escaping is required, use of BRACEs (CONVERT_BRACE) + * is usually preferred over the use of escape sequences (CONVERT_ESCAPE). + * There are some exceptions to both of these preferences for reasons of + * code simplicity, efficiency, and continuation of historical habits. + * Canonical lists never use the QUOTE formatting to delimit their elements + * because that form of quoting does not nest, which makes construction of + * nested lists far too much trouble. Canonical lists always use only a + * single SPACE character for element-separating whitespace. + * + * * * FUTURE CONSIDERATIONS * * * + * + * When a list element requires quoting or escaping due to a CLOSE BRACKET + * character or an internal QUOTE character, a strange formatting mode is + * recommended. For example, if the value "a{b]c}d" is converted by the + * usual modes: + * + * CONVERT_BRACE: a{b]c}d => {a{b]c}d} + * CONVERT_ESCAPE: a{b]c}d => a\{b\]c\}d + * + * we get perfectly usable formatted list elements. However, this is not + * what Tcl releases have been producing. Instead, we have: + * + * CONVERT_MASK: a{b]c}d => a{b\]c}d + * + * where the CLOSE BRACKET is escaped, but the BRACEs are not. The same + * effect can be seen replacing ] with " in this example. There does not + * appear to be any functional or aesthetic purpose for this strange + * additional mode. The sole purpose I can see for preserving it is to + * keep generating the same formatted lists programmers have become accustomed + * to, and perhaps written tests to expect. That is, compatibility only. + * The additional code complexity required to support this mode is significant. + * The lines of code supporting it are delimited in the routines below with + * #if COMPAT directives. This makes it easy to experiment with eliminating + * this formatting mode simply with "#define COMPAT 0" above. I believe + * this is worth considering. + * + * Another consideration is the treatment of QUOTE characters in list elements. + * TclConvertElement() must have the ability to produce the escape sequence + * \" so that when a list element begins with a QUOTE we do not confuse + * that first character with a QUOTE used as list syntax to define list + * structure. However, that is the only place where QUOTE characters need + * quoting. In this way, handling QUOTE could really be much more like + * the way we handle HASH which also needs quoting and escaping only in + * particular situations. Following up this could increase the set of + * list elements that can use the CONVERT_NONE formatting mode. + * + * More speculative is that the demands of canonical list form require brace + * balance for the list as a whole, while the current implementation achieves + * this by establishing brace balance for every element. + * + * Finally, a reminder that the rules for parsing and formatting lists are + * closely tied together with the rules for parsing and evaluating scripts, + * and will need to evolve in sync. + */ + +/* *---------------------------------------------------------------------- * * TclMaxListLength -- @@ -176,7 +449,7 @@ TclMaxListLength( * that's part of the element. If this is the last argument in the list, * then *nextPtr will point just after the last character in the list * (i.e., at the character at list+listLength). If sizePtr is non-NULL, - * *sizePtr is filled in with the number of characters in the element. If + * *sizePtr is filled in with the number of bytes in the element. If * the element is in braces, then *elementPtr will point to the character * after the opening brace and *sizePtr will not include either of the * braces. If there isn't an element in the list, *sizePtr will be zero, @@ -562,9 +835,9 @@ Tcl_SplitList( * enclosing braces) to make the string into a valid Tcl list element. * * Results: - * The return value is an overestimate of the number of characters that + * The return value is an overestimate of the number of bytes that * will be needed by Tcl_ConvertElement to produce a valid list element - * from string. The word at *flagPtr is filled in with a value needed by + * from src. The word at *flagPtr is filled in with a value needed by * Tcl_ConvertElement when doing the actual conversion. * * Side effects: @@ -575,11 +848,11 @@ Tcl_SplitList( int Tcl_ScanElement( - register CONST char *string,/* String to convert to list element. */ + register CONST char *src, /* String to convert to list element. */ register int *flagPtr) /* Where to store information to guide * Tcl_ConvertCountedElement. */ { - return Tcl_ScanCountedElement(string, -1, flagPtr); + return Tcl_ScanCountedElement(src, -1, flagPtr); } /* @@ -590,13 +863,13 @@ Tcl_ScanElement( * This function is a companion function to Tcl_ConvertCountedElement. It * scans a string to see what needs to be done to it (e.g. add * backslashes or enclosing braces) to make the string into a valid Tcl - * list element. If length is -1, then the string is scanned up to the - * first null byte. + * list element. If length is -1, then the string is scanned from src up + * to the first null byte. * * Results: - * The return value is an overestimate of the number of characters that + * The return value is an overestimate of the number of bytes that * will be needed by Tcl_ConvertCountedElement to produce a valid list - * element from string. The word at *flagPtr is filled in with a value + * element from src. The word at *flagPtr is filled in with a value * needed by Tcl_ConvertCountedElement when doing the actual conversion. * * Side effects: @@ -607,79 +880,119 @@ Tcl_ScanElement( int Tcl_ScanCountedElement( - CONST char *string, /* String to convert to Tcl list element. */ - int length, /* Number of bytes in string, or -1. */ + CONST char *src, /* String to convert to Tcl list element. */ + int length, /* Number of bytes in src, or -1. */ int *flagPtr) /* Where to store information to guide * Tcl_ConvertElement. */ { - int flags, nestingLevel; - register CONST char *p, *lastChar; + int flags = CONVERT_ANY; + int numBytes = TclScanElement(src, length, &flags); - /* - * This function and Tcl_ConvertElement together do two things: - * - * 1. They produce a proper list, one that will yield back the argument - * strings when evaluated or when disassembled with Tcl_SplitList. This - * is the most important thing. - * - * 2. They try to produce legible output, which means minimizing the use - * of backslashes (using braces instead). However, there are some - * situations where backslashes must be used (e.g. an element like - * "{abc": the leading brace will have to be backslashed. For each - * element, one of three things must be done: - * - * (a) Use the element as-is (it doesn't contain any special - * characters). This is the most desirable option. - * - * (b) Enclose the element in braces, but leave the contents alone. - * This happens if the element contains embedded space, or if it - * contains characters with special interpretation ($, [, ;, or \), - * or if it starts with a brace or double-quote, or if there are no - * characters in the element. - * - * (c) Don't enclose the element in braces, but add backslashes to - * prevent special interpretation of special characters. This is a - * last resort used when the argument would normally fall under - * case (b) but contains unmatched braces. It also occurs if the - * last character of the argument is a backslash or if the element - * contains a backslash followed by newline. - * - * The function figures out how many bytes will be needed to store the - * result (actually, it overestimates). It also collects information about - * the element in the form of a flags word. - * - * Note: list elements produced by this function and - * Tcl_ConvertCountedElement must have the property that they can be - * enclosing in curly braces to make sub-lists. This means, for example, - * that we must not leave unmatched curly braces in the resulting list - * element. This property is necessary in order for functions like - * Tcl_DStringStartSublist to work. - */ + *flagPtr = flags; + return numBytes; +} + +/* + *---------------------------------------------------------------------- + * + * TclScanElement -- + * + * This function is a companion function to TclConvertElement. It + * scans a string to see what needs to be done to it (e.g. add + * backslashes or enclosing braces) to make the string into a valid Tcl + * list element. If length is -1, then the string is scanned from src up + * to the first null byte. A NULL value for src is treated as an + * empty string. The incoming value of *flagPtr is a report from the + * caller what additional flags it will pass to TclConvertElement(). + * + * Results: + * The recommended formatting mode for the element is determined and + * a value is written to *flagPtr indicating that recommendation. This + * recommendation is combined with the incoming flag values in *flagPtr + * set by the caller to determine how many bytes will be needed by + * TclConvertElement() in which to write the formatted element following + * the recommendation modified by the flag values. This number of bytes + * is the return value of the routine. In some situations it may be + * an overestimate, but so long as the caller passes the same flags + * to TclConvertElement(), it will be large enough. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ - nestingLevel = 0; - flags = 0; - if (string == NULL) { - string = ""; - } - if (length == -1) { - length = strlen(string); +int +TclScanElement( + CONST char *src, /* String to convert to Tcl list element. */ + int length, /* Number of bytes in src, or -1. */ + int *flagPtr) /* Where to store information to guide + * Tcl_ConvertElement. */ +{ + CONST char *p = src; + int nestingLevel = 0; /* Brace nesting count */ + int forbidNone = 0; /* Do not permit CONVERT_NONE mode. Something + needs protection or escape. */ + int requireEscape = 0; /* Force use of CONVERT_ESCAPE mode. For some + * reason bare or brace-quoted form fails. */ + int extra = 0; /* Count of number of extra bytes needed for + * formatted element, assuming we use escape + * sequences in formatting. */ + int bytesNeeded; /* Buffer length computed to complete the + * element formatting in the selected mode. */ +#if COMPAT + int preferEscape = 0; /* Use preferences to track whether to use */ + int preferBrace = 0; /* CONVERT_MASK mode. */ + int braceCount = 0; /* Count of all braces '{' '}' seen. */ +#endif + + if ((p == NULL) || (length == 0) || ((*p == '\0') && (length == -1))) { + /* Empty string element must be brace quoted. */ + *flagPtr = CONVERT_BRACE; + return 2; } - lastChar = string + length; - p = string; - if ((p == lastChar) || (*p == '{') || (*p == '"')) { - flags |= USE_BRACES; + + if ((*p == '{') || (*p == '"')) { + /* + * Must escape or protect so leading character of value is not + * misinterpreted as list element delimiting syntax. + */ + forbidNone = 1; +#if COMPAT + preferBrace = 1; +#endif } - for (; p < lastChar; p++) { + + while (length) { switch (*p) { case '{': +#if COMPAT + braceCount++; +#endif + extra++; /* Escape '{' => '\{' */ nestingLevel++; break; case '}': +#if COMPAT + braceCount++; +#endif + extra++; /* Escape '}' => '\}' */ nestingLevel--; if (nestingLevel < 0) { - flags |= TCL_DONT_USE_BRACES|BRACES_UNMATCHED; + /* Unbalanced braces! Cannot format with brace quoting. */ + requireEscape = 1; } break; + case ']': + case '"': +#if COMPAT + forbidNone = 1; + extra++; /* Escapes all just prepend a backslash */ + preferEscape = 1; + break; +#else + /* FLOW THROUGH */ +#endif case '[': case '$': case ';': @@ -689,32 +1002,143 @@ Tcl_ScanCountedElement( case '\r': case '\t': case '\v': - flags |= USE_BRACES; + forbidNone = 1; + extra++; /* Escape sequences all one byte longer. */ +#if COMPAT + preferBrace = 1; +#endif break; case '\\': - if ((p+1 == lastChar) || (p[1] == '\n')) { - flags = TCL_DONT_USE_BRACES | BRACES_UNMATCHED; - } else { - int size; - - TclParseBackslash(p, lastChar - p, &size, NULL); - p += size-1; - flags |= USE_BRACES; + extra++; /* Escape '\' => '\\' */ + if ((length == 1) || ((length == -1) && (p[1] == '\0'))) { + /* Final backslash. Cannot format with brace quoting. */ + requireEscape = 1; + break; + } + if (p[1] == '\n') { + extra++; /* Escape newline => '\n', one byte longer */ + /* Backslash newline sequence. Brace quoting not permitted. */ + requireEscape = 1; + length -= (length > 0); + p++; + break; } + if ((p[1] == '{') || (p[1] == '}') || (p[1] == '\\')) { + extra++; /* Escape sequences all one byte longer. */ + length -= (length > 0); + p++; + } + forbidNone = 1; +#if COMPAT + preferBrace = 1; +#endif + break; + case '\0': + if (length == -1) { + goto endOfString; + } + /* TODO: Panic on improper encoding? */ break; } + length -= (length > 0); + p++; } + + endOfString: if (nestingLevel != 0) { - flags = TCL_DONT_USE_BRACES | BRACES_UNMATCHED; + /* Unbalanced braces! Cannot format with brace quoting. */ + requireEscape = 1; } - *flagPtr = flags; - /* - * Allow enough space to backslash every character plus leave two spaces - * for braces. - */ + /* We need at least as many bytes as are in the element value... */ + bytesNeeded = p - src; - return 2*(p-string) + 2; + if (requireEscape) { + /* + * We must use escape sequences. Add all the extra bytes needed + * to have room to create them. + */ + bytesNeeded += extra; + /* Make room to escape leading #, if needed. */ + if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { + bytesNeeded++; + } + *flagPtr = CONVERT_ESCAPE; + goto overflowCheck; + } + if (*flagPtr & CONVERT_ANY) { + /* + * The caller has not let us know what flags it will pass to + * TclConvertElement() so compute the max size we might need for + * any possible choice. Normally the formatting using escape + * sequences is the longer one, and a minimum "extra" value of 2 + * makes sure we don't request too small a buffer in those edge + * cases where that's not true. + */ + if (extra < 2) { + extra = 2; + } + *flagPtr &= ~CONVERT_ANY; + *flagPtr |= TCL_DONT_USE_BRACES; + } + if (forbidNone) { + /* We must request some form of quoting of escaping... */ +#if COMPAT + if (preferEscape && !preferBrace) { + /* + * If we are quoting solely due to ] or internal " characters + * use the CONVERT_MASK mode where we escape all special + * characters except for braces. "extra" counted space needed + * to escape braces too, so substract "braceCount" to get our + * actual needs. + */ + bytesNeeded += (extra - braceCount); + /* Make room to escape leading #, if needed. */ + if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { + bytesNeeded++; + } + /* + * If the caller reports it will direct TclConvertElement() to + * use full escapes on the element, add back the bytes needed to + * escape the braces. + */ + if (*flagPtr & TCL_DONT_USE_BRACES) { + bytesNeeded += braceCount; + } + *flagPtr = CONVERT_MASK; + goto overflowCheck; + } +#endif + if (*flagPtr & TCL_DONT_USE_BRACES) { + /* + * If the caller reports it will direct TclConvertElement() to + * use escapes, add the extra bytes needed to have room for them. + */ + bytesNeeded += extra; + /* Make room to escape leading #, if needed. */ + if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { + bytesNeeded++; + } + } else { + /* Add 2 bytes for room for the enclosing braces. */ + bytesNeeded += 2; + } + *flagPtr = CONVERT_BRACE; + goto overflowCheck; + } + + /* So far, no need to quote or escape anything. */ + if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { + /* If we need to quote a leading #, make room to enclose in braces. */ + bytesNeeded += 2; + } + *flagPtr = CONVERT_NONE; + + overflowCheck: + if (bytesNeeded < 0) { + Tcl_Panic("TclScanElement: string length overflow"); + } + return bytesNeeded; } /* @@ -775,125 +1199,171 @@ Tcl_ConvertCountedElement( char *dst, /* Place to put list-ified element. */ int flags) /* Flags produced by Tcl_ScanElement. */ { - register char *p = dst; - register CONST char *lastChar; + int numBytes = TclConvertElement(src, length, dst, flags); + dst[numBytes] = '\0'; + return numBytes; +} + +/* + *---------------------------------------------------------------------- + * + * TclConvertElement -- + * + * This is a companion function to TclScanElement. Given the + * information produced by TclScanElement, this function converts + * a string to a list element equal to that string. + * + * Results: + * Information is copied to *dst in the form of a list element identical + * to src (i.e. if Tcl_SplitList is applied to dst it will produce a + * string identical to src). The return value is a count of the number of + * characters copied (not including the terminating NULL character). + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ - /* - * See the comment block at the beginning of the Tcl_ScanElement code for - * details of how this works. - */ +int TclConvertElement( + register CONST char *src, /* Source information for list element. */ + int length, /* Number of bytes in src, or -1. */ + char *dst, /* Place to put list-ified element. */ + int flags) /* Flags produced by Tcl_ScanElement. */ +{ + int conversion = flags & CONVERT_MASK; + char *p = dst; - if (src && length == -1) { - length = strlen(src); + /* Let the caller demand we use escape sequences rather than braces. */ + if ((flags & TCL_DONT_USE_BRACES) && (conversion & CONVERT_BRACE)) { + conversion = CONVERT_ESCAPE; } - if ((src == NULL) || (length == 0)) { - p[0] = '{'; - p[1] = '}'; - p[2] = 0; - return 2; + + /* No matter what the caller demands, empty string must be braced! */ + if ((src == NULL) || (length == 0) || ((*src == '\0') && (length == -1))) { + src = tclEmptyStringRep; + length = 0; + conversion = CONVERT_BRACE; } - lastChar = src + length; + + /* Escape leading hash as needed and requested. */ if ((*src == '#') && !(flags & TCL_DONT_QUOTE_HASH)) { - flags |= USE_BRACES; + if (conversion == CONVERT_ESCAPE) { + p[0] = '\\'; + p[1] = '#'; + p += 2; + src++; + length--; + } else { + conversion = CONVERT_BRACE; + } + } + + /* No escape or quoting needed. Copy the literal string value. */ + if (conversion == CONVERT_NONE) { + if (length == -1) { + /* TODO: INT_MAX overflow? */ + while (*src) { + *p++ = *src++; + } + return p - dst; + } else { + memcpy(dst, src, length); + return length; + } } - if ((flags & USE_BRACES) && !(flags & TCL_DONT_USE_BRACES)) { + + /* Formatted string is original string enclosed in braces. */ + if (conversion == CONVERT_BRACE) { *p = '{'; p++; - for (; src != lastChar; src++, p++) { - *p = *src; + if (length == -1) { + /* TODO: INT_MAX overflow? */ + while (*src) { + *p++ = *src++; + } + } else { + memcpy(p, src, length); + p += length; } *p = '}'; p++; - } else { - if (*src == '{') { - /* - * Can't have a leading brace unless the whole element is enclosed - * in braces. Add a backslash before the brace. Furthermore, this - * may destroy the balance between open and close braces, so set - * BRACES_UNMATCHED. - */ - - p[0] = '\\'; - p[1] = '{'; - p += 2; - src++; - flags |= BRACES_UNMATCHED; - } else if ((*src == '#') && !(flags & TCL_DONT_QUOTE_HASH)) { - /* - * Leading '#' could be seen by [eval] as the start of a comment, - * if on the first element of a list, so quote it. - */ + return p - dst; + } - p[0] = '\\'; - p[1] = '#'; - p += 2; - src++; - } - for (; src != lastChar; src++) { - switch (*src) { - case ']': - case '[': - case '$': - case ';': - case ' ': - case '\\': - case '"': - *p = '\\'; - p++; - break; - case '{': - case '}': - /* - * It may not seem necessary to backslash braces, but it is. - * The reason for this is that the resulting list element may - * actually be an element of a sub-list enclosed in braces - * (e.g. if Tcl_DStringStartSublist has been invoked), so - * there may be a brace mismatch if the braces aren't - * backslashed. - */ + /* conversion == CONVERT_ESCAPE or CONVERT_MASK */ - if (flags & BRACES_UNMATCHED) { - *p = '\\'; - p++; - } - break; - case '\f': - *p = '\\'; - p++; - *p = 'f'; - p++; - continue; - case '\n': - *p = '\\'; - p++; - *p = 'n'; - p++; - continue; - case '\r': - *p = '\\'; - p++; - *p = 'r'; - p++; - continue; - case '\t': - *p = '\\'; - p++; - *p = 't'; - p++; - continue; - case '\v': + /* Formatted string is original string converted to escape sequences. */ + for ( ; length; src++, length -= (length > 0)) { + switch (*src) { + case ']': + case '[': + case '$': + case ';': + case ' ': + case '\\': + case '"': + *p = '\\'; + p++; + break; + case '{': + case '}': +#if COMPAT + if (conversion == CONVERT_ESCAPE) { +#endif *p = '\\'; p++; - *p = 'v'; - p++; - continue; +#if COMPAT } - *p = *src; +#endif + break; + case '\f': + *p = '\\'; + p++; + *p = 'f'; + p++; + continue; + case '\n': + *p = '\\'; + p++; + *p = 'n'; + p++; + continue; + case '\r': + *p = '\\'; + p++; + *p = 'r'; + p++; + continue; + case '\t': + *p = '\\'; + p++; + *p = 't'; p++; + continue; + case '\v': + *p = '\\'; + p++; + *p = 'v'; + p++; + continue; + case '\0': + if (length == -1) { + return p - dst; + } + /* + * If we reach this point, there's an embedded NULL in the + * string range being processed, which should not happen when + * the encoding rules for Tcl strings are properly followed. + * If the day ever comes when we stop tolerating such things, + * this is where to put the Tcl_Panic(). + */ + break; } + *p = *src; + p++; } - *p = '\0'; - return p-dst; + return p - dst; } /* @@ -922,11 +1392,20 @@ Tcl_Merge( CONST char * CONST *argv) /* Array of string values. */ { # define LOCAL_SIZE 20 - int localFlags[LOCAL_SIZE], *flagPtr; - int numChars; - char *result; - char *dst; - int i; + int localFlags[LOCAL_SIZE], *flagPtr = NULL; + int i, bytesNeeded = 0; + char *result, *dst; + const int maxFlags = UINT_MAX / sizeof(int); + + if (argc == 0) { + /* + * Handle empty list case first, so logic of the general case + * can be simpler. + */ + result = ckalloc(1); + result[0] = '\0'; + return result; + } /* * Pass 1: estimate space, gather flags. @@ -934,32 +1413,48 @@ Tcl_Merge( if (argc <= LOCAL_SIZE) { flagPtr = localFlags; + } else if (argc > maxFlags) { + /* + * We cannot allocate a large enough flag array to format this + * list in one pass. We could imagine converting this routine + * to a multi-pass implementation, but for sizeof(int) == 4, + * the limit is a max of 2^30 list elements and since each element + * is at least one byte formatted, and requires one byte space + * between it and the next one, that a minimum space requirement + * of 2^31 bytes, which is already INT_MAX. If we tried to format + * a list of > maxFlags elements, we're just going to overflow + * the size limits on the formatted string anyway, so just issue + * that same panic early. + */ + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); } else { flagPtr = (int *) ckalloc((unsigned) argc*sizeof(int)); } - numChars = 1; for (i = 0; i < argc; i++) { - numChars += Tcl_ScanElement(argv[i], &flagPtr[i]) + 1; + flagPtr[i] = ( i ? TCL_DONT_QUOTE_HASH : 0 ); + bytesNeeded += TclScanElement(argv[i], -1, &flagPtr[i]); + if (bytesNeeded < 0) { + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); + } } + if (bytesNeeded > INT_MAX - argc + 1) { + Tcl_Panic("max size for a Tcl value (%d bytes) exceeded", INT_MAX); + } + bytesNeeded += argc; /* * Pass two: copy into the result area. */ - result = (char *) ckalloc((unsigned) numChars); + result = ckalloc((unsigned) bytesNeeded); dst = result; for (i = 0; i < argc; i++) { - numChars = Tcl_ConvertElement(argv[i], dst, - flagPtr[i] | (i==0 ? 0 : TCL_DONT_QUOTE_HASH)); - dst += numChars; + flagPtr[i] |= ( i ? TCL_DONT_QUOTE_HASH : 0 ); + dst += TclConvertElement(argv[i], -1, dst, flagPtr[i]); *dst = ' '; dst++; } - if (dst == result) { - *dst = 0; - } else { - dst[-1] = 0; - } + dst[-1] = 0; if (flagPtr != localFlags) { ckfree((char *) flagPtr); @@ -1972,12 +2467,11 @@ Tcl_DStringAppendElement( CONST char *element) /* String to append. Must be * null-terminated. */ { - int newSize, flags, strSize; - char *dst; - - strSize = ((element== NULL) ? 0 : strlen(element)); - newSize = Tcl_ScanCountedElement(element, strSize, &flags) - + dsPtr->length + 1; + char *dst = dsPtr->string + dsPtr->length; + int needSpace = TclNeedSpace(dsPtr->string, dst); + int flags = needSpace ? TCL_DONT_QUOTE_HASH : 0; + int newSize = dsPtr->length + needSpace + + TclScanElement(element, -1, &flags); /* * Allocate a larger buffer for the string if the current one isn't large @@ -1998,6 +2492,7 @@ Tcl_DStringAppendElement( dsPtr->string = (char *) ckrealloc((void *) dsPtr->string, (size_t) dsPtr->spaceAvl); } + dst = dsPtr->string + dsPtr->length; } /* @@ -2005,8 +2500,7 @@ Tcl_DStringAppendElement( * the end, with a space, if needed. */ - dst = dsPtr->string + dsPtr->length; - if (TclNeedSpace(dsPtr->string, dst)) { + if (needSpace) { *dst = ' '; dst++; dsPtr->length++; @@ -2019,7 +2513,8 @@ Tcl_DStringAppendElement( flags |= TCL_DONT_QUOTE_HASH; } - dsPtr->length += Tcl_ConvertCountedElement(element, strSize, dst, flags); + dsPtr->length += TclConvertElement(element, -1, dst, flags); + dsPtr->string[dsPtr->length] = '\0'; return dsPtr->string; } |